diff options
Diffstat (limited to 'drivers/hwmon/w83795.c')
| -rw-r--r-- | drivers/hwmon/w83795.c | 2285 |
1 files changed, 2285 insertions, 0 deletions
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c new file mode 100644 index 000000000..1bb80f992 --- /dev/null +++ b/drivers/hwmon/w83795.c @@ -0,0 +1,2285 @@ +/* + * w83795.c - Linux kernel driver for hardware monitoring + * Copyright (C) 2008 Nuvoton Technology Corp. + * Wei Song + * Copyright (C) 2010 Jean Delvare <jdelvare@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation - version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + * + * Supports following chips: + * + * Chip #vin #fanin #pwm #temp #dts wchipid vendid i2c ISA + * w83795g 21 14 8 6 8 0x79 0x5ca3 yes no + * w83795adg 18 14 2 6 8 0x79 0x5ca3 yes no + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/jiffies.h> +#include <linux/util_macros.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { + 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END +}; + + +static bool reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); + + +#define W83795_REG_BANKSEL 0x00 +#define W83795_REG_VENDORID 0xfd +#define W83795_REG_CHIPID 0xfe +#define W83795_REG_DEVICEID 0xfb +#define W83795_REG_DEVICEID_A 0xff + +#define W83795_REG_I2C_ADDR 0xfc +#define W83795_REG_CONFIG 0x01 +#define W83795_REG_CONFIG_CONFIG48 0x04 +#define W83795_REG_CONFIG_START 0x01 + +/* Multi-Function Pin Ctrl Registers */ +#define W83795_REG_VOLT_CTRL1 0x02 +#define W83795_REG_VOLT_CTRL2 0x03 +#define W83795_REG_TEMP_CTRL1 0x04 +#define W83795_REG_TEMP_CTRL2 0x05 +#define W83795_REG_FANIN_CTRL1 0x06 +#define W83795_REG_FANIN_CTRL2 0x07 +#define W83795_REG_VMIGB_CTRL 0x08 + +#define TEMP_READ 0 +#define TEMP_CRIT 1 +#define TEMP_CRIT_HYST 2 +#define TEMP_WARN 3 +#define TEMP_WARN_HYST 4 +/* + * only crit and crit_hyst affect real-time alarm status + * current crit crit_hyst warn warn_hyst + */ +static const u16 W83795_REG_TEMP[][5] = { + {0x21, 0x96, 0x97, 0x98, 0x99}, /* TD1/TR1 */ + {0x22, 0x9a, 0x9b, 0x9c, 0x9d}, /* TD2/TR2 */ + {0x23, 0x9e, 0x9f, 0xa0, 0xa1}, /* TD3/TR3 */ + {0x24, 0xa2, 0xa3, 0xa4, 0xa5}, /* TD4/TR4 */ + {0x1f, 0xa6, 0xa7, 0xa8, 0xa9}, /* TR5 */ + {0x20, 0xaa, 0xab, 0xac, 0xad}, /* TR6 */ +}; + +#define IN_READ 0 +#define IN_MAX 1 +#define IN_LOW 2 +static const u16 W83795_REG_IN[][3] = { + /* Current, HL, LL */ + {0x10, 0x70, 0x71}, /* VSEN1 */ + {0x11, 0x72, 0x73}, /* VSEN2 */ + {0x12, 0x74, 0x75}, /* VSEN3 */ + {0x13, 0x76, 0x77}, /* VSEN4 */ + {0x14, 0x78, 0x79}, /* VSEN5 */ + {0x15, 0x7a, 0x7b}, /* VSEN6 */ + {0x16, 0x7c, 0x7d}, /* VSEN7 */ + {0x17, 0x7e, 0x7f}, /* VSEN8 */ + {0x18, 0x80, 0x81}, /* VSEN9 */ + {0x19, 0x82, 0x83}, /* VSEN10 */ + {0x1A, 0x84, 0x85}, /* VSEN11 */ + {0x1B, 0x86, 0x87}, /* VTT */ + {0x1C, 0x88, 0x89}, /* 3VDD */ + {0x1D, 0x8a, 0x8b}, /* 3VSB */ + {0x1E, 0x8c, 0x8d}, /* VBAT */ + {0x1F, 0xa6, 0xa7}, /* VSEN12 */ + {0x20, 0xaa, 0xab}, /* VSEN13 */ + {0x21, 0x96, 0x97}, /* VSEN14 */ + {0x22, 0x9a, 0x9b}, /* VSEN15 */ + {0x23, 0x9e, 0x9f}, /* VSEN16 */ + {0x24, 0xa2, 0xa3}, /* VSEN17 */ +}; +#define W83795_REG_VRLSB 0x3C + +static const u8 W83795_REG_IN_HL_LSB[] = { + 0x8e, /* VSEN1-4 */ + 0x90, /* VSEN5-8 */ + 0x92, /* VSEN9-11 */ + 0x94, /* VTT, 3VDD, 3VSB, 3VBAT */ + 0xa8, /* VSEN12 */ + 0xac, /* VSEN13 */ + 0x98, /* VSEN14 */ + 0x9c, /* VSEN15 */ + 0xa0, /* VSEN16 */ + 0xa4, /* VSEN17 */ +}; + +#define IN_LSB_REG(index, type) \ + (((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \ + : (W83795_REG_IN_HL_LSB[(index)] + 1)) + +#define IN_LSB_SHIFT 0 +#define IN_LSB_IDX 1 +static const u8 IN_LSB_SHIFT_IDX[][2] = { + /* High/Low LSB shift, LSB No. */ + {0x00, 0x00}, /* VSEN1 */ + {0x02, 0x00}, /* VSEN2 */ + {0x04, 0x00}, /* VSEN3 */ + {0x06, 0x00}, /* VSEN4 */ + {0x00, 0x01}, /* VSEN5 */ + {0x02, 0x01}, /* VSEN6 */ + {0x04, 0x01}, /* VSEN7 */ + {0x06, 0x01}, /* VSEN8 */ + {0x00, 0x02}, /* VSEN9 */ + {0x02, 0x02}, /* VSEN10 */ + {0x04, 0x02}, /* VSEN11 */ + {0x00, 0x03}, /* VTT */ + {0x02, 0x03}, /* 3VDD */ + {0x04, 0x03}, /* 3VSB */ + {0x06, 0x03}, /* VBAT */ + {0x06, 0x04}, /* VSEN12 */ + {0x06, 0x05}, /* VSEN13 */ + {0x06, 0x06}, /* VSEN14 */ + {0x06, 0x07}, /* VSEN15 */ + {0x06, 0x08}, /* VSEN16 */ + {0x06, 0x09}, /* VSEN17 */ +}; + + +#define W83795_REG_FAN(index) (0x2E + (index)) +#define W83795_REG_FAN_MIN_HL(index) (0xB6 + (index)) +#define W83795_REG_FAN_MIN_LSB(index) (0xC4 + (index) / 2) +#define W83795_REG_FAN_MIN_LSB_SHIFT(index) \ + (((index) & 1) ? 4 : 0) + +#define W83795_REG_VID_CTRL 0x6A + +#define W83795_REG_ALARM_CTRL 0x40 +#define ALARM_CTRL_RTSACS (1 << 7) +#define W83795_REG_ALARM(index) (0x41 + (index)) +#define W83795_REG_CLR_CHASSIS 0x4D +#define W83795_REG_BEEP(index) (0x50 + (index)) + +#define W83795_REG_OVT_CFG 0x58 +#define OVT_CFG_SEL (1 << 7) + + +#define W83795_REG_FCMS1 0x201 +#define W83795_REG_FCMS2 0x208 +#define W83795_REG_TFMR(index) (0x202 + (index)) +#define W83795_REG_FOMC 0x20F + +#define W83795_REG_TSS(index) (0x209 + (index)) + +#define TSS_MAP_RESERVED 0xff +static const u8 tss_map[4][6] = { + { 0, 1, 2, 3, 4, 5}, + { 6, 7, 8, 9, 0, 1}, + {10, 11, 12, 13, 2, 3}, + { 4, 5, 4, 5, TSS_MAP_RESERVED, TSS_MAP_RESERVED}, +}; + +#define PWM_OUTPUT 0 +#define PWM_FREQ 1 +#define PWM_START 2 +#define PWM_NONSTOP 3 +#define PWM_STOP_TIME 4 +#define W83795_REG_PWM(index, nr) (0x210 + (nr) * 8 + (index)) + +#define W83795_REG_FTSH(index) (0x240 + (index) * 2) +#define W83795_REG_FTSL(index) (0x241 + (index) * 2) +#define W83795_REG_TFTS 0x250 + +#define TEMP_PWM_TTTI 0 +#define TEMP_PWM_CTFS 1 +#define TEMP_PWM_HCT 2 +#define TEMP_PWM_HOT 3 +#define W83795_REG_TTTI(index) (0x260 + (index)) +#define W83795_REG_CTFS(index) (0x268 + (index)) +#define W83795_REG_HT(index) (0x270 + (index)) + +#define SF4_TEMP 0 +#define SF4_PWM 1 +#define W83795_REG_SF4_TEMP(temp_num, index) \ + (0x280 + 0x10 * (temp_num) + (index)) +#define W83795_REG_SF4_PWM(temp_num, index) \ + (0x288 + 0x10 * (temp_num) + (index)) + +#define W83795_REG_DTSC 0x301 +#define W83795_REG_DTSE 0x302 +#define W83795_REG_DTS(index) (0x26 + (index)) +#define W83795_REG_PECI_TBASE(index) (0x320 + (index)) + +#define DTS_CRIT 0 +#define DTS_CRIT_HYST 1 +#define DTS_WARN 2 +#define DTS_WARN_HYST 3 +#define W83795_REG_DTS_EXT(index) (0xB2 + (index)) + +#define SETUP_PWM_DEFAULT 0 +#define SETUP_PWM_UPTIME 1 +#define SETUP_PWM_DOWNTIME 2 +#define W83795_REG_SETUP_PWM(index) (0x20C + (index)) + +static inline u16 in_from_reg(u8 index, u16 val) +{ + /* 3VDD, 3VSB and VBAT: 6 mV/bit; other inputs: 2 mV/bit */ + if (index >= 12 && index <= 14) + return val * 6; + else + return val * 2; +} + +static inline u16 in_to_reg(u8 index, u16 val) +{ + if (index >= 12 && index <= 14) + return val / 6; + else + return val / 2; +} + +static inline unsigned long fan_from_reg(u16 val) +{ + if ((val == 0xfff) || (val == 0)) + return 0; + return 1350000UL / val; +} + +static inline u16 fan_to_reg(long rpm) +{ + if (rpm <= 0) + return 0x0fff; + return clamp_val((1350000 + (rpm >> 1)) / rpm, 1, 0xffe); +} + +static inline unsigned long time_from_reg(u8 reg) +{ + return reg * 100; +} + +static inline u8 time_to_reg(unsigned long val) +{ + return clamp_val((val + 50) / 100, 0, 0xff); +} + +static inline long temp_from_reg(s8 reg) +{ + return reg * 1000; +} + +static inline s8 temp_to_reg(long val, s8 min, s8 max) +{ + return clamp_val(val / 1000, min, max); +} + +static const u16 pwm_freq_cksel0[16] = { + 1024, 512, 341, 256, 205, 171, 146, 128, + 85, 64, 32, 16, 8, 4, 2, 1 +}; + +static unsigned int pwm_freq_from_reg(u8 reg, u16 clkin) +{ + unsigned long base_clock; + + if (reg & 0x80) { + base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256); + return base_clock / ((reg & 0x7f) + 1); + } else + return pwm_freq_cksel0[reg & 0x0f]; +} + +static u8 pwm_freq_to_reg(unsigned long val, u16 clkin) +{ + unsigned long base_clock; + u8 reg0, reg1; + unsigned long best0, best1; + + /* Best fit for cksel = 0 */ + reg0 = find_closest_descending(val, pwm_freq_cksel0, + ARRAY_SIZE(pwm_freq_cksel0)); + if (val < 375) /* cksel = 1 can't beat this */ + return reg0; + best0 = pwm_freq_cksel0[reg0]; + + /* Best fit for cksel = 1 */ + base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256); + reg1 = clamp_val(DIV_ROUND_CLOSEST(base_clock, val), 1, 128); + best1 = base_clock / reg1; + reg1 = 0x80 | (reg1 - 1); + + /* Choose the closest one */ + if (abs(val - best0) > abs(val - best1)) + return reg1; + else + return reg0; +} + +enum chip_types {w83795g, w83795adg}; + +struct w83795_data { + struct device *hwmon_dev; + struct mutex update_lock; + unsigned long last_updated; /* In jiffies */ + enum chip_types chip_type; + + u8 bank; + + u32 has_in; /* Enable monitor VIN or not */ + u8 has_dyn_in; /* Only in2-0 can have this */ + u16 in[21][3]; /* Register value, read/high/low */ + u8 in_lsb[10][3]; /* LSB Register value, high/low */ + u8 has_gain; /* has gain: in17-20 * 8 */ + + u16 has_fan; /* Enable fan14-1 or not */ + u16 fan[14]; /* Register value combine */ + u16 fan_min[14]; /* Register value combine */ + + u8 has_temp; /* Enable monitor temp6-1 or not */ + s8 temp[6][5]; /* current, crit, crit_hyst, warn, warn_hyst */ + u8 temp_read_vrlsb[6]; + u8 temp_mode; /* Bit vector, 0 = TR, 1 = TD */ + u8 temp_src[3]; /* Register value */ + + u8 enable_dts; /* + * Enable PECI and SB-TSI, + * bit 0: =1 enable, =0 disable, + * bit 1: =1 AMD SB-TSI, =0 Intel PECI + */ + u8 has_dts; /* Enable monitor DTS temp */ + s8 dts[8]; /* Register value */ + u8 dts_read_vrlsb[8]; /* Register value */ + s8 dts_ext[4]; /* Register value */ + + u8 has_pwm; /* + * 795g supports 8 pwm, 795adg only supports 2, + * no config register, only affected by chip + * type + */ + u8 pwm[8][5]; /* + * Register value, output, freq, start, + * non stop, stop time + */ + u16 clkin; /* CLKIN frequency in kHz */ + u8 pwm_fcms[2]; /* Register value */ + u8 pwm_tfmr[6]; /* Register value */ + u8 pwm_fomc; /* Register value */ + + u16 target_speed[8]; /* + * Register value, target speed for speed + * cruise + */ + u8 tol_speed; /* tolerance of target speed */ + u8 pwm_temp[6][4]; /* TTTI, CTFS, HCT, HOT */ + u8 sf4_reg[6][2][7]; /* 6 temp, temp/dcpwm, 7 registers */ + + u8 setup_pwm[3]; /* Register value */ + + u8 alarms[6]; /* Register value */ + u8 enable_beep; + u8 beeps[6]; /* Register value */ + + char valid; + char valid_limits; + char valid_pwm_config; +}; + +/* + * Hardware access + * We assume that nobdody can change the bank outside the driver. + */ + +/* Must be called with data->update_lock held, except during initialization */ +static int w83795_set_bank(struct i2c_client *client, u8 bank) +{ + struct w83795_data *data = i2c_get_clientdata(client); + int err; + + /* If the same bank is already set, nothing to do */ + if ((data->bank & 0x07) == bank) + return 0; + + /* Change to new bank, preserve all other bits */ + bank |= data->bank & ~0x07; + err = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, bank); + if (err < 0) { + dev_err(&client->dev, + "Failed to set bank to %d, err %d\n", + (int)bank, err); + return err; + } + data->bank = bank; + + return 0; +} + +/* Must be called with data->update_lock held, except during initialization */ +static u8 w83795_read(struct i2c_client *client, u16 reg) +{ + int err; + + err = w83795_set_bank(client, reg >> 8); + if (err < 0) + return 0x00; /* Arbitrary */ + + err = i2c_smbus_read_byte_data(client, reg & 0xff); + if (err < 0) { + dev_err(&client->dev, + "Failed to read from register 0x%03x, err %d\n", + (int)reg, err); + return 0x00; /* Arbitrary */ + } + return err; +} + +/* Must be called with data->update_lock held, except during initialization */ +static int w83795_write(struct i2c_client *client, u16 reg, u8 value) +{ + int err; + + err = w83795_set_bank(client, reg >> 8); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(client, reg & 0xff, value); + if (err < 0) + dev_err(&client->dev, + "Failed to write to register 0x%03x, err %d\n", + (int)reg, err); + return err; +} + +static void w83795_update_limits(struct i2c_client *client) +{ + struct w83795_data *data = i2c_get_clientdata(client); + int i, limit; + u8 lsb; + + /* Read the voltage limits */ + for (i = 0; i < ARRAY_SIZE(data->in); i++) { + if (!(data->has_in & (1 << i))) + continue; + data->in[i][IN_MAX] = + w83795_read(client, W83795_REG_IN[i][IN_MAX]); + data->in[i][IN_LOW] = + w83795_read(client, W83795_REG_IN[i][IN_LOW]); + } + for (i = 0; i < ARRAY_SIZE(data->in_lsb); i++) { + if ((i == 2 && data->chip_type == w83795adg) || + (i >= 4 && !(data->has_in & (1 << (i + 11))))) + continue; + data->in_lsb[i][IN_MAX] = + w83795_read(client, IN_LSB_REG(i, IN_MAX)); + data->in_lsb[i][IN_LOW] = + w83795_read(client, IN_LSB_REG(i, IN_LOW)); + } + + /* Read the fan limits */ + lsb = 0; /* Silent false gcc warning */ + for (i = 0; i < ARRAY_SIZE(data->fan); i++) { + /* + * Each register contains LSB for 2 fans, but we want to + * read it only once to save time + */ + if ((i & 1) == 0 && (data->has_fan & (3 << i))) + lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i)); + + if (!(data->has_fan & (1 << i))) + continue; + data->fan_min[i] = + w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4; + data->fan_min[i] |= + (lsb >> W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F; + } + + /* Read the temperature limits */ + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + if (!(data->has_temp & (1 << i))) + continue; + for (limit = TEMP_CRIT; limit <= TEMP_WARN_HYST; limit++) + data->temp[i][limit] = + w83795_read(client, W83795_REG_TEMP[i][limit]); + } + + /* Read the DTS limits */ + if (data->enable_dts) { + for (limit = DTS_CRIT; limit <= DTS_WARN_HYST; limit++) + data->dts_ext[limit] = + w83795_read(client, W83795_REG_DTS_EXT(limit)); + } + + /* Read beep settings */ + if (data->enable_beep) { + for (i = 0; i < ARRAY_SIZE(data->beeps); i++) + data->beeps[i] = + w83795_read(client, W83795_REG_BEEP(i)); + } + + data->valid_limits = 1; +} + +static struct w83795_data *w83795_update_pwm_config(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + int i, tmp; + + mutex_lock(&data->update_lock); + + if (data->valid_pwm_config) + goto END; + + /* Read temperature source selection */ + for (i = 0; i < ARRAY_SIZE(data->temp_src); i++) + data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i)); + + /* Read automatic fan speed control settings */ + data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1); + data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2); + for (i = 0; i < ARRAY_SIZE(data->pwm_tfmr); i++) + data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i)); + data->pwm_fomc = w83795_read(client, W83795_REG_FOMC); + for (i = 0; i < data->has_pwm; i++) { + for (tmp = PWM_FREQ; tmp <= PWM_STOP_TIME; tmp++) + data->pwm[i][tmp] = + w83795_read(client, W83795_REG_PWM(i, tmp)); + } + for (i = 0; i < ARRAY_SIZE(data->target_speed); i++) { + data->target_speed[i] = + w83795_read(client, W83795_REG_FTSH(i)) << 4; + data->target_speed[i] |= + w83795_read(client, W83795_REG_FTSL(i)) >> 4; + } + data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f; + + for (i = 0; i < ARRAY_SIZE(data->pwm_temp); i++) { + data->pwm_temp[i][TEMP_PWM_TTTI] = + w83795_read(client, W83795_REG_TTTI(i)) & 0x7f; + data->pwm_temp[i][TEMP_PWM_CTFS] = + w83795_read(client, W83795_REG_CTFS(i)); + tmp = w83795_read(client, W83795_REG_HT(i)); + data->pwm_temp[i][TEMP_PWM_HCT] = tmp >> 4; + data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f; + } + + /* Read SmartFanIV trip points */ + for (i = 0; i < ARRAY_SIZE(data->sf4_reg); i++) { + for (tmp = 0; tmp < 7; tmp++) { + data->sf4_reg[i][SF4_TEMP][tmp] = + w83795_read(client, + W83795_REG_SF4_TEMP(i, tmp)); + data->sf4_reg[i][SF4_PWM][tmp] = + w83795_read(client, W83795_REG_SF4_PWM(i, tmp)); + } + } + + /* Read setup PWM */ + for (i = 0; i < ARRAY_SIZE(data->setup_pwm); i++) + data->setup_pwm[i] = + w83795_read(client, W83795_REG_SETUP_PWM(i)); + + data->valid_pwm_config = 1; + +END: + mutex_unlock(&data->update_lock); + return data; +} + +static struct w83795_data *w83795_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + u16 tmp; + u8 intrusion; + int i; + + mutex_lock(&data->update_lock); + + if (!data->valid_limits) + w83795_update_limits(client); + + if (!(time_after(jiffies, data->last_updated + HZ * 2) + || !data->valid)) + goto END; + + /* Update the voltages value */ + for (i = 0; i < ARRAY_SIZE(data->in); i++) { + if (!(data->has_in & (1 << i))) + continue; + tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2; + tmp |= w83795_read(client, W83795_REG_VRLSB) >> 6; + data->in[i][IN_READ] = tmp; + } + + /* in0-2 can have dynamic limits (W83795G only) */ + if (data->has_dyn_in) { + u8 lsb_max = w83795_read(client, IN_LSB_REG(0, IN_MAX)); + u8 lsb_low = w83795_read(client, IN_LSB_REG(0, IN_LOW)); + + for (i = 0; i < 3; i++) { + if (!(data->has_dyn_in & (1 << i))) + continue; + data->in[i][IN_MAX] = + w83795_read(client, W83795_REG_IN[i][IN_MAX]); + data->in[i][IN_LOW] = + w83795_read(client, W83795_REG_IN[i][IN_LOW]); + data->in_lsb[i][IN_MAX] = (lsb_max >> (2 * i)) & 0x03; + data->in_lsb[i][IN_LOW] = (lsb_low >> (2 * i)) & 0x03; + } + } + + /* Update fan */ + for (i = 0; i < ARRAY_SIZE(data->fan); i++) { + if (!(data->has_fan & (1 << i))) + continue; + data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4; + data->fan[i] |= w83795_read(client, W83795_REG_VRLSB) >> 4; + } + + /* Update temperature */ + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + data->temp[i][TEMP_READ] = + w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]); + data->temp_read_vrlsb[i] = + w83795_read(client, W83795_REG_VRLSB); + } + + /* Update dts temperature */ + if (data->enable_dts) { + for (i = 0; i < ARRAY_SIZE(data->dts); i++) { + if (!(data->has_dts & (1 << i))) + continue; + data->dts[i] = + w83795_read(client, W83795_REG_DTS(i)); + data->dts_read_vrlsb[i] = + w83795_read(client, W83795_REG_VRLSB); + } + } + + /* Update pwm output */ + for (i = 0; i < data->has_pwm; i++) { + data->pwm[i][PWM_OUTPUT] = + w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT)); + } + + /* + * Update intrusion and alarms + * It is important to read intrusion first, because reading from + * register SMI STS6 clears the interrupt status temporarily. + */ + tmp = w83795_read(client, W83795_REG_ALARM_CTRL); + /* Switch to interrupt status for intrusion if needed */ + if (tmp & ALARM_CTRL_RTSACS) + w83795_write(client, W83795_REG_ALARM_CTRL, + tmp & ~ALARM_CTRL_RTSACS); + intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6); + /* Switch to real-time alarms */ + w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS); + for (i = 0; i < ARRAY_SIZE(data->alarms); i++) + data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i)); + data->alarms[5] |= intrusion; + /* Restore original configuration if needed */ + if (!(tmp & ALARM_CTRL_RTSACS)) + w83795_write(client, W83795_REG_ALARM_CTRL, + tmp & ~ALARM_CTRL_RTSACS); + + data->last_updated = jiffies; + data->valid = 1; + +END: + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Sysfs attributes + */ + +#define ALARM_STATUS 0 +#define BEEP_ENABLE 1 +static ssize_t +show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = w83795_update_device(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index >> 3; + int bit = sensor_attr->index & 0x07; + u8 val; + + if (nr == ALARM_STATUS) + val = (data->alarms[index] >> bit) & 1; + else /* BEEP_ENABLE */ + val = (data->beeps[index] >> bit) & 1; + + return sprintf(buf, "%u\n", val); +} + +static ssize_t +store_beep(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index >> 3; + int shift = sensor_attr->index & 0x07; + u8 beep_bit = 1 << shift; + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index)); + data->beeps[index] &= ~beep_bit; + data->beeps[index] |= val << shift; + w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]); + mutex_unlock(&data->update_lock); + + return count; +} + +/* Write 0 to clear chassis alarm */ +static ssize_t +store_chassis_clear(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0 || val != 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + val = w83795_read(client, W83795_REG_CLR_CHASSIS); + val |= 0x80; + w83795_write(client, W83795_REG_CLR_CHASSIS, val); + + /* Clear status and force cache refresh */ + w83795_read(client, W83795_REG_ALARM(5)); + data->valid = 0; + mutex_unlock(&data->update_lock); + return count; +} + +#define FAN_INPUT 0 +#define FAN_MIN 1 +static ssize_t +show_fan(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83795_data *data = w83795_update_device(dev); + u16 val; + + if (nr == FAN_INPUT) + val = data->fan[index] & 0x0fff; + else + val = data->fan_min[index] & 0x0fff; + + return sprintf(buf, "%lu\n", fan_from_reg(val)); +} + +static ssize_t +store_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + unsigned long val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + val = fan_to_reg(val); + + mutex_lock(&data->update_lock); + data->fan_min[index] = val; + w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff); + val &= 0x0f; + if (index & 1) { + val <<= 4; + val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index)) + & 0x0f; + } else { + val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index)) + & 0xf0; + } + w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t +show_pwm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data; + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned int val; + + data = nr == PWM_OUTPUT ? w83795_update_device(dev) + : w83795_update_pwm_config(dev); + + switch (nr) { + case PWM_STOP_TIME: + val = time_from_reg(data->pwm[index][nr]); + break; + case PWM_FREQ: + val = pwm_freq_from_reg(data->pwm[index][nr], data->clkin); + break; + default: + val = data->pwm[index][nr]; + break; + } + + return sprintf(buf, "%u\n", val); +} + +static ssize_t +store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + switch (nr) { + case PWM_STOP_TIME: + val = time_to_reg(val); + break; + case PWM_FREQ: + val = pwm_freq_to_reg(val, data->clkin); + break; + default: + val = clamp_val(val, 0, 0xff); + break; + } + w83795_write(client, W83795_REG_PWM(index, nr), val); + data->pwm[index][nr] = val; + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + struct w83795_data *data = w83795_update_pwm_config(dev); + int index = sensor_attr->index; + u8 tmp; + + /* Speed cruise mode */ + if (data->pwm_fcms[0] & (1 << index)) { + tmp = 2; + goto out; + } + /* Thermal cruise or SmartFan IV mode */ + for (tmp = 0; tmp < 6; tmp++) { + if (data->pwm_tfmr[tmp] & (1 << index)) { + tmp = 3; + goto out; + } + } + /* Manual mode */ + tmp = 1; + +out: + return sprintf(buf, "%u\n", tmp); +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index; + unsigned long val; + int i; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + if (val < 1 || val > 2) + return -EINVAL; + +#ifndef CONFIG_SENSORS_W83795_FANCTRL + if (val > 1) { + dev_warn(dev, "Automatic fan speed control support disabled\n"); + dev_warn(dev, "Build with CONFIG_SENSORS_W83795_FANCTRL=y if you want it\n"); + return -EOPNOTSUPP; + } +#endif + + mutex_lock(&data->update_lock); + switch (val) { + case 1: + /* Clear speed cruise mode bits */ + data->pwm_fcms[0] &= ~(1 << index); + w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]); + /* Clear thermal cruise mode bits */ + for (i = 0; i < 6; i++) { + data->pwm_tfmr[i] &= ~(1 << index); + w83795_write(client, W83795_REG_TFMR(i), + data->pwm_tfmr[i]); + } + break; + case 2: + data->pwm_fcms[0] |= (1 << index); + w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]); + break; + } + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = w83795_update_pwm_config(dev); + int index = to_sensor_dev_attr_2(attr)->index; + unsigned int mode; + + if (data->pwm_fomc & (1 << index)) + mode = 0; /* DC */ + else + mode = 1; /* PWM */ + + return sprintf(buf, "%u\n", mode); +} + +/* + * Check whether a given temperature source can ever be useful. + * Returns the number of selectable temperature channels which are + * enabled. + */ +static int w83795_tss_useful(const struct w83795_data *data, int tsrc) +{ + int useful = 0, i; + + for (i = 0; i < 4; i++) { + if (tss_map[i][tsrc] == TSS_MAP_RESERVED) + continue; + if (tss_map[i][tsrc] < 6) /* Analog */ + useful += (data->has_temp >> tss_map[i][tsrc]) & 1; + else /* Digital */ + useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1; + } + + return useful; +} + +static ssize_t +show_temp_src(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + struct w83795_data *data = w83795_update_pwm_config(dev); + int index = sensor_attr->index; + u8 tmp = data->temp_src[index / 2]; + + if (index & 1) + tmp >>= 4; /* Pick high nibble */ + else + tmp &= 0x0f; /* Pick low nibble */ + + /* Look-up the actual temperature channel number */ + if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED) + return -EINVAL; /* Shouldn't happen */ + + return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1); +} + +static ssize_t +store_temp_src(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index; + int tmp; + unsigned long channel; + u8 val = index / 2; + + if (kstrtoul(buf, 10, &channel) < 0 || + channel < 1 || channel > 14) + return -EINVAL; + + /* Check if request can be fulfilled */ + for (tmp = 0; tmp < 4; tmp++) { + if (tss_map[tmp][index] == channel - 1) + break; + } + if (tmp == 4) /* No match */ + return -EINVAL; + + mutex_lock(&data->update_lock); + if (index & 1) { + tmp <<= 4; + data->temp_src[val] &= 0x0f; + } else { + data->temp_src[val] &= 0xf0; + } + data->temp_src[val] |= tmp; + w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]); + mutex_unlock(&data->update_lock); + + return count; +} + +#define TEMP_PWM_ENABLE 0 +#define TEMP_PWM_FAN_MAP 1 +static ssize_t +show_temp_pwm_enable(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + u8 tmp = 0xff; + + switch (nr) { + case TEMP_PWM_ENABLE: + tmp = (data->pwm_fcms[1] >> index) & 1; + if (tmp) + tmp = 4; + else + tmp = 3; + break; + case TEMP_PWM_FAN_MAP: + tmp = data->pwm_tfmr[index]; + break; + } + + return sprintf(buf, "%u\n", tmp); +} + +static ssize_t +store_temp_pwm_enable(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned long tmp; + + if (kstrtoul(buf, 10, &tmp) < 0) + return -EINVAL; + + switch (nr) { + case TEMP_PWM_ENABLE: + if (tmp != 3 && tmp != 4) + return -EINVAL; + tmp -= 3; + mutex_lock(&data->update_lock); + data->pwm_fcms[1] &= ~(1 << index); + data->pwm_fcms[1] |= tmp << index; + w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]); + mutex_unlock(&data->update_lock); + break; + case TEMP_PWM_FAN_MAP: + mutex_lock(&data->update_lock); + tmp = clamp_val(tmp, 0, 0xff); + w83795_write(client, W83795_REG_TFMR(index), tmp); + data->pwm_tfmr[index] = tmp; + mutex_unlock(&data->update_lock); + break; + } + return count; +} + +#define FANIN_TARGET 0 +#define FANIN_TOL 1 +static ssize_t +show_fanin(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + u16 tmp = 0; + + switch (nr) { + case FANIN_TARGET: + tmp = fan_from_reg(data->target_speed[index]); + break; + case FANIN_TOL: + tmp = data->tol_speed; + break; + } + + return sprintf(buf, "%u\n", tmp); +} + +static ssize_t +store_fanin(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + switch (nr) { + case FANIN_TARGET: + val = fan_to_reg(clamp_val(val, 0, 0xfff)); + w83795_write(client, W83795_REG_FTSH(index), val >> 4); + w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0); + data->target_speed[index] = val; + break; + case FANIN_TOL: + val = clamp_val(val, 0, 0x3f); + w83795_write(client, W83795_REG_TFTS, val); + data->tol_speed = val; + break; + } + mutex_unlock(&data->update_lock); + + return count; +} + + +static ssize_t +show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + long tmp = temp_from_reg(data->pwm_temp[index][nr]); + + return sprintf(buf, "%ld\n", tmp); +} + +static ssize_t +store_temp_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned long val; + u8 tmp; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + val /= 1000; + + mutex_lock(&data->update_lock); + switch (nr) { + case TEMP_PWM_TTTI: + val = clamp_val(val, 0, 0x7f); + w83795_write(client, W83795_REG_TTTI(index), val); + break; + case TEMP_PWM_CTFS: + val = clamp_val(val, 0, 0x7f); + w83795_write(client, W83795_REG_CTFS(index), val); + break; + case TEMP_PWM_HCT: + val = clamp_val(val, 0, 0x0f); + tmp = w83795_read(client, W83795_REG_HT(index)); + tmp &= 0x0f; + tmp |= (val << 4) & 0xf0; + w83795_write(client, W83795_REG_HT(index), tmp); + break; + case TEMP_PWM_HOT: + val = clamp_val(val, 0, 0x0f); + tmp = w83795_read(client, W83795_REG_HT(index)); + tmp &= 0xf0; + tmp |= val & 0x0f; + w83795_write(client, W83795_REG_HT(index), tmp); + break; + } + data->pwm_temp[index][nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t +show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + + return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]); +} + +static ssize_t +store_sf4_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + w83795_write(client, W83795_REG_SF4_PWM(index, nr), val); + data->sf4_reg[index][SF4_PWM][nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t +show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = w83795_update_pwm_config(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + + return sprintf(buf, "%u\n", + (data->sf4_reg[index][SF4_TEMP][nr]) * 1000); +} + +static ssize_t +store_sf4_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + val /= 1000; + + mutex_lock(&data->update_lock); + w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val); + data->sf4_reg[index][SF4_TEMP][nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + + +static ssize_t +show_temp(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83795_data *data = w83795_update_device(dev); + long temp = temp_from_reg(data->temp[index][nr]); + + if (nr == TEMP_READ) + temp += (data->temp_read_vrlsb[index] >> 6) * 250; + return sprintf(buf, "%ld\n", temp); +} + +static ssize_t +store_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + long tmp; + + if (kstrtol(buf, 10, &tmp) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->temp[index][nr] = temp_to_reg(tmp, -128, 127); + w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]); + mutex_unlock(&data->update_lock); + return count; +} + + +static ssize_t +show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = dev_get_drvdata(dev); + int tmp; + + if (data->enable_dts & 2) + tmp = 5; + else + tmp = 6; + + return sprintf(buf, "%d\n", tmp); +} + +static ssize_t +show_dts(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index; + struct w83795_data *data = w83795_update_device(dev); + long temp = temp_from_reg(data->dts[index]); + + temp += (data->dts_read_vrlsb[index] >> 6) * 250; + return sprintf(buf, "%ld\n", temp); +} + +static ssize_t +show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + struct w83795_data *data = dev_get_drvdata(dev); + long temp = temp_from_reg(data->dts_ext[nr]); + + return sprintf(buf, "%ld\n", temp); +} + +static ssize_t +store_dts_ext(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + long tmp; + + if (kstrtol(buf, 10, &tmp) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->dts_ext[nr] = temp_to_reg(tmp, -128, 127); + w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]); + mutex_unlock(&data->update_lock); + return count; +} + + +static ssize_t +show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83795_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index; + int tmp; + + if (data->temp_mode & (1 << index)) + tmp = 3; /* Thermal diode */ + else + tmp = 4; /* Thermistor */ + + return sprintf(buf, "%d\n", tmp); +} + +/* Only for temp1-4 (temp5-6 can only be thermistor) */ +static ssize_t +store_temp_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int index = sensor_attr->index; + int reg_shift; + unsigned long val; + u8 tmp; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + if ((val != 4) && (val != 3)) + return -EINVAL; + + mutex_lock(&data->update_lock); + if (val == 3) { + /* Thermal diode */ + val = 0x01; + data->temp_mode |= 1 << index; + } else if (val == 4) { + /* Thermistor */ + val = 0x03; + data->temp_mode &= ~(1 << index); + } + + reg_shift = 2 * index; + tmp = w83795_read(client, W83795_REG_TEMP_CTRL2); + tmp &= ~(0x03 << reg_shift); + tmp |= val << reg_shift; + w83795_write(client, W83795_REG_TEMP_CTRL2, tmp); + + mutex_unlock(&data->update_lock); + return count; +} + + +/* show/store VIN */ +static ssize_t +show_in(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83795_data *data = w83795_update_device(dev); + u16 val = data->in[index][nr]; + u8 lsb_idx; + + switch (nr) { + case IN_READ: + /* calculate this value again by sensors as sensors3.conf */ + if ((index >= 17) && + !((data->has_gain >> (index - 17)) & 1)) + val *= 8; + break; + case IN_MAX: + case IN_LOW: + lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX]; + val <<= 2; + val |= (data->in_lsb[lsb_idx][nr] >> + IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]) & 0x03; + if ((index >= 17) && + !((data->has_gain >> (index - 17)) & 1)) + val *= 8; + break; + } + val = in_from_reg(index, val); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t +store_in(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + unsigned long val; + u8 tmp; + u8 lsb_idx; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + val = in_to_reg(index, val); + + if ((index >= 17) && + !((data->has_gain >> (index - 17)) & 1)) + val /= 8; + val = clamp_val(val, 0, 0x3FF); + mutex_lock(&data->update_lock); + + lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX]; + tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr)); + tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]); + tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]; + w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp); + data->in_lsb[lsb_idx][nr] = tmp; + + tmp = (val >> 2) & 0xff; + w83795_write(client, W83795_REG_IN[index][nr], tmp); + data->in[index][nr] = tmp; + + mutex_unlock(&data->update_lock); + return count; +} + + +#ifdef CONFIG_SENSORS_W83795_FANCTRL +static ssize_t +show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + struct w83795_data *data = w83795_update_pwm_config(dev); + u16 val = data->setup_pwm[nr]; + + switch (nr) { + case SETUP_PWM_UPTIME: + case SETUP_PWM_DOWNTIME: + val = time_from_reg(val); + break; + } + + return sprintf(buf, "%d\n", val); +} + +static ssize_t +store_sf_setup(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + struct i2c_client *client = to_i2c_client(dev); + struct w83795_data *data = i2c_get_clientdata(client); + unsigned long val; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + + switch (nr) { + case SETUP_PWM_DEFAULT: + val = clamp_val(val, 0, 0xff); + break; + case SETUP_PWM_UPTIME: + case SETUP_PWM_DOWNTIME: + val = time_to_reg(val); + if (val == 0) + return -EINVAL; + break; + } + + mutex_lock(&data->update_lock); + data->setup_pwm[nr] = val; + w83795_write(client, W83795_REG_SETUP_PWM(nr), val); + mutex_unlock(&data->update_lock); + return count; +} +#endif + + +#define NOT_USED -1 + +/* + * Don't change the attribute order, _max, _min and _beep are accessed by index + * somewhere else in the code + */ +#define SENSOR_ATTR_IN(index) { \ + SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \ + IN_READ, index), \ + SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \ + store_in, IN_MAX, index), \ + SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \ + store_in, IN_LOW, index), \ + SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \ + NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \ + SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \ + show_alarm_beep, store_beep, BEEP_ENABLE, \ + index + ((index > 14) ? 1 : 0)) } + +/* + * Don't change the attribute order, _beep is accessed by index + * somewhere else in the code + */ +#define SENSOR_ATTR_FAN(index) { \ + SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \ + NULL, FAN_INPUT, index - 1), \ + SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \ + show_fan, store_fan_min, FAN_MIN, index - 1), \ + SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \ + NULL, ALARM_STATUS, index + 31), \ + SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \ + show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) } + +#define SENSOR_ATTR_PWM(index) { \ + SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \ + store_pwm, PWM_OUTPUT, index - 1), \ + SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \ + show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \ + SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO, \ + show_pwm_mode, NULL, NOT_USED, index - 1), \ + SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO, \ + show_pwm, store_pwm, PWM_FREQ, index - 1), \ + SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \ + show_pwm, store_pwm, PWM_NONSTOP, index - 1), \ + SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \ + show_pwm, store_pwm, PWM_START, index - 1), \ + SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \ + show_pwm, store_pwm, PWM_STOP_TIME, index - 1), \ + SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \ + show_fanin, store_fanin, FANIN_TARGET, index - 1) } + +/* + * Don't change the attribute order, _beep is accessed by index + * somewhere else in the code + */ +#define SENSOR_ATTR_DTS(index) { \ + SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \ + show_dts_mode, NULL, NOT_USED, index - 7), \ + SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts, \ + NULL, NOT_USED, index - 7), \ + SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_dts_ext, \ + store_dts_ext, DTS_CRIT, NOT_USED), \ + SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR, \ + show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED), \ + SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \ + store_dts_ext, DTS_WARN, NOT_USED), \ + SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \ + show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED), \ + SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \ + show_alarm_beep, NULL, ALARM_STATUS, index + 17), \ + SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \ + show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) } + +/* + * Don't change the attribute order, _beep is accessed by index + * somewhere else in the code + */ +#define SENSOR_ATTR_TEMP(index) { \ + SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \ + show_temp_mode, store_temp_mode, NOT_USED, index - 1), \ + SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \ + NULL, TEMP_READ, index - 1), \ + SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_temp, \ + store_temp, TEMP_CRIT, index - 1), \ + SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR, \ + show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \ + SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \ + store_temp, TEMP_WARN, index - 1), \ + SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \ + show_temp, store_temp, TEMP_WARN_HYST, index - 1), \ + SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \ + show_alarm_beep, NULL, ALARM_STATUS, \ + index + (index > 4 ? 11 : 17)), \ + SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \ + show_alarm_beep, store_beep, BEEP_ENABLE, \ + index + (index > 4 ? 11 : 17)), \ + SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \ + show_temp_pwm_enable, store_temp_pwm_enable, \ + TEMP_PWM_ENABLE, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \ + show_temp_pwm_enable, store_temp_pwm_enable, \ + TEMP_PWM_FAN_MAP, index - 1), \ + SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO, \ + show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \ + SENSOR_ATTR_2(temp##index##_warn, S_IWUSR | S_IRUGO, \ + show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \ + SENSOR_ATTR_2(temp##index##_warn_hyst, S_IWUSR | S_IRUGO, \ + show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \ + SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO, \ + show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 0, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 1, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 2, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 3, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 4, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 5, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \ + show_sf4_pwm, store_sf4_pwm, 6, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 0, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 1, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 2, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 3, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 4, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 5, index - 1), \ + SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\ + show_sf4_temp, store_sf4_temp, 6, index - 1) } + + +static struct sensor_device_attribute_2 w83795_in[][5] = { + SENSOR_ATTR_IN(0), + SENSOR_ATTR_IN(1), + SENSOR_ATTR_IN(2), + SENSOR_ATTR_IN(3), + SENSOR_ATTR_IN(4), + SENSOR_ATTR_IN(5), + SENSOR_ATTR_IN(6), + SENSOR_ATTR_IN(7), + SENSOR_ATTR_IN(8), + SENSOR_ATTR_IN(9), + SENSOR_ATTR_IN(10), + SENSOR_ATTR_IN(11), + SENSOR_ATTR_IN(12), + SENSOR_ATTR_IN(13), + SENSOR_ATTR_IN(14), + SENSOR_ATTR_IN(15), + SENSOR_ATTR_IN(16), + SENSOR_ATTR_IN(17), + SENSOR_ATTR_IN(18), + SENSOR_ATTR_IN(19), + SENSOR_ATTR_IN(20), +}; + +static const struct sensor_device_attribute_2 w83795_fan[][4] = { + SENSOR_ATTR_FAN(1), + SENSOR_ATTR_FAN(2), + SENSOR_ATTR_FAN(3), + SENSOR_ATTR_FAN(4), + SENSOR_ATTR_FAN(5), + SENSOR_ATTR_FAN(6), + SENSOR_ATTR_FAN(7), + SENSOR_ATTR_FAN(8), + SENSOR_ATTR_FAN(9), + SENSOR_ATTR_FAN(10), + SENSOR_ATTR_FAN(11), + SENSOR_ATTR_FAN(12), + SENSOR_ATTR_FAN(13), + SENSOR_ATTR_FAN(14), +}; + +static const struct sensor_device_attribute_2 w83795_temp[][28] = { + SENSOR_ATTR_TEMP(1), + SENSOR_ATTR_TEMP(2), + SENSOR_ATTR_TEMP(3), + SENSOR_ATTR_TEMP(4), + SENSOR_ATTR_TEMP(5), + SENSOR_ATTR_TEMP(6), +}; + +static const struct sensor_device_attribute_2 w83795_dts[][8] = { + SENSOR_ATTR_DTS(7), + SENSOR_ATTR_DTS(8), + SENSOR_ATTR_DTS(9), + SENSOR_ATTR_DTS(10), + SENSOR_ATTR_DTS(11), + SENSOR_ATTR_DTS(12), + SENSOR_ATTR_DTS(13), + SENSOR_ATTR_DTS(14), +}; + +static const struct sensor_device_attribute_2 w83795_pwm[][8] = { + SENSOR_ATTR_PWM(1), + SENSOR_ATTR_PWM(2), + SENSOR_ATTR_PWM(3), + SENSOR_ATTR_PWM(4), + SENSOR_ATTR_PWM(5), + SENSOR_ATTR_PWM(6), + SENSOR_ATTR_PWM(7), + SENSOR_ATTR_PWM(8), +}; + +static const struct sensor_device_attribute_2 w83795_tss[6] = { + SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 0), + SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 1), + SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 2), + SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 3), + SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 4), + SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 5), +}; + +static const struct sensor_device_attribute_2 sda_single_files[] = { + SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep, + store_chassis_clear, ALARM_STATUS, 46), +#ifdef CONFIG_SENSORS_W83795_FANCTRL + SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin, + store_fanin, FANIN_TOL, NOT_USED), + SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup, + store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED), + SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup, + store_sf_setup, SETUP_PWM_UPTIME, NOT_USED), + SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup, + store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED), +#endif +}; + +static const struct sensor_device_attribute_2 sda_beep_files[] = { + SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep, + store_beep, BEEP_ENABLE, 46), + SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep, + store_beep, BEEP_ENABLE, 47), +}; + +/* + * Driver interface + */ + +static void w83795_init_client(struct i2c_client *client) +{ + struct w83795_data *data = i2c_get_clientdata(client); + static const u16 clkin[4] = { /* in kHz */ + 14318, 24000, 33333, 48000 + }; + u8 config; + + if (reset) + w83795_write(client, W83795_REG_CONFIG, 0x80); + + /* Start monitoring if needed */ + config = w83795_read(client, W83795_REG_CONFIG); + if (!(config & W83795_REG_CONFIG_START)) { + dev_info(&client->dev, "Enabling monitoring operations\n"); + w83795_write(client, W83795_REG_CONFIG, + config | W83795_REG_CONFIG_START); + } + + data->clkin = clkin[(config >> 3) & 0x3]; + dev_dbg(&client->dev, "clkin = %u kHz\n", data->clkin); +} + +static int w83795_get_device_id(struct i2c_client *client) +{ + int device_id; + + device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID); + + /* + * Special case for rev. A chips; can't be checked first because later + * revisions emulate this for compatibility + */ + if (device_id < 0 || (device_id & 0xf0) != 0x50) { + int alt_id; + + alt_id = i2c_smbus_read_byte_data(client, + W83795_REG_DEVICEID_A); + if (alt_id == 0x50) + device_id = alt_id; + } + + return device_id; +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83795_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + int bank, vendor_id, device_id, expected, i2c_addr, config; + struct i2c_adapter *adapter = client->adapter; + unsigned short address = client->addr; + const char *chip_name; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL); + if (bank < 0 || (bank & 0x7c)) { + dev_dbg(&adapter->dev, + "w83795: Detection failed at addr 0x%02hx, check %s\n", + address, "bank"); + return -ENODEV; + } + + /* Check Nuvoton vendor ID */ + vendor_id = i2c_smbus_read_byte_data(client, W83795_REG_VENDORID); + expected = bank & 0x80 ? 0x5c : 0xa3; + if (vendor_id != expected) { + dev_dbg(&adapter->dev, + "w83795: Detection failed at addr 0x%02hx, check %s\n", + address, "vendor id"); + return -ENODEV; + } + + /* Check device ID */ + device_id = w83795_get_device_id(client) | + (i2c_smbus_read_byte_data(client, W83795_REG_CHIPID) << 8); + if ((device_id >> 4) != 0x795) { + dev_dbg(&adapter->dev, + "w83795: Detection failed at addr 0x%02hx, check %s\n", + address, "device id\n"); + return -ENODEV; + } + + /* + * If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR + * should match + */ + if ((bank & 0x07) == 0) { + i2c_addr = i2c_smbus_read_byte_data(client, + W83795_REG_I2C_ADDR); + if ((i2c_addr & 0x7f) != address) { + dev_dbg(&adapter->dev, + "w83795: Detection failed at addr 0x%02hx, " + "check %s\n", address, "i2c addr"); + return -ENODEV; + } + } + + /* + * Check 795 chip type: 795G or 795ADG + * Usually we don't write to chips during detection, but here we don't + * quite have the choice; hopefully it's OK, we are about to return + * success anyway + */ + if ((bank & 0x07) != 0) + i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, + bank & ~0x07); + config = i2c_smbus_read_byte_data(client, W83795_REG_CONFIG); + if (config & W83795_REG_CONFIG_CONFIG48) + chip_name = "w83795adg"; + else + chip_name = "w83795g"; + + strlcpy(info->type, chip_name, I2C_NAME_SIZE); + dev_info(&adapter->dev, "Found %s rev. %c at 0x%02hx\n", chip_name, + 'A' + (device_id & 0xf), address); + + return 0; +} + +#ifdef CONFIG_SENSORS_W83795_FANCTRL +#define NUM_PWM_ATTRIBUTES ARRAY_SIZE(w83795_pwm[0]) +#define NUM_TEMP_ATTRIBUTES ARRAY_SIZE(w83795_temp[0]) +#else +#define NUM_PWM_ATTRIBUTES 4 +#define NUM_TEMP_ATTRIBUTES 8 +#endif + +static int w83795_handle_files(struct device *dev, int (*fn)(struct device *, + const struct device_attribute *)) +{ + struct w83795_data *data = dev_get_drvdata(dev); + int err, i, j; + + for (i = 0; i < ARRAY_SIZE(w83795_in); i++) { + if (!(data->has_in & (1 << i))) + continue; + for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) { + if (j == 4 && !data->enable_beep) + continue; + err = fn(dev, &w83795_in[i][j].dev_attr); + if (err) + return err; + } + } + + for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) { + if (!(data->has_fan & (1 << i))) + continue; + for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) { + if (j == 3 && !data->enable_beep) + continue; + err = fn(dev, &w83795_fan[i][j].dev_attr); + if (err) + return err; + } + } + + for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) { + j = w83795_tss_useful(data, i); + if (!j) + continue; + err = fn(dev, &w83795_tss[i].dev_attr); + if (err) + return err; + } + + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) { + err = fn(dev, &sda_single_files[i].dev_attr); + if (err) + return err; + } + + if (data->enable_beep) { + for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) { + err = fn(dev, &sda_beep_files[i].dev_attr); + if (err) + return err; + } + } + + for (i = 0; i < data->has_pwm; i++) { + for (j = 0; j < NUM_PWM_ATTRIBUTES; j++) { + err = fn(dev, &w83795_pwm[i][j].dev_attr); + if (err) + return err; + } + } + + for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) { + if (!(data->has_temp & (1 << i))) + continue; + for (j = 0; j < NUM_TEMP_ATTRIBUTES; j++) { + if (j == 7 && !data->enable_beep) + continue; + err = fn(dev, &w83795_temp[i][j].dev_attr); + if (err) + return err; + } + } + + if (data->enable_dts) { + for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) { + if (!(data->has_dts & (1 << i))) + continue; + for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) { + if (j == 7 && !data->enable_beep) + continue; + err = fn(dev, &w83795_dts[i][j].dev_attr); + if (err) + return err; + } + } + } + + return 0; +} + +/* We need a wrapper that fits in w83795_handle_files */ +static int device_remove_file_wrapper(struct device *dev, + const struct device_attribute *attr) +{ + device_remove_file(dev, attr); + return 0; +} + +static void w83795_check_dynamic_in_limits(struct i2c_client *client) +{ + struct w83795_data *data = i2c_get_clientdata(client); + u8 vid_ctl; + int i, err_max, err_min; + + vid_ctl = w83795_read(client, W83795_REG_VID_CTRL); + + /* Return immediately if VRM isn't configured */ + if ((vid_ctl & 0x07) == 0x00 || (vid_ctl & 0x07) == 0x07) + return; + + data->has_dyn_in = (vid_ctl >> 3) & 0x07; + for (i = 0; i < 2; i++) { + if (!(data->has_dyn_in & (1 << i))) + continue; + + /* Voltage limits in dynamic mode, switch to read-only */ + err_max = sysfs_chmod_file(&client->dev.kobj, + &w83795_in[i][2].dev_attr.attr, + S_IRUGO); + err_min = sysfs_chmod_file(&client->dev.kobj, + &w83795_in[i][3].dev_attr.attr, + S_IRUGO); + if (err_max || err_min) + dev_warn(&client->dev, + "Failed to set in%d limits read-only (%d, %d)\n", + i, err_max, err_min); + else + dev_info(&client->dev, + "in%d limits set dynamically from VID\n", i); + } +} + +/* Check pins that can be used for either temperature or voltage monitoring */ +static void w83795_apply_temp_config(struct w83795_data *data, u8 config, + int temp_chan, int in_chan) +{ + /* config is a 2-bit value */ + switch (config) { + case 0x2: /* Voltage monitoring */ + data->has_in |= 1 << in_chan; + break; + case 0x1: /* Thermal diode */ + if (temp_chan >= 4) + break; + data->temp_mode |= 1 << temp_chan; + /* fall through */ + case 0x3: /* Thermistor */ + data->has_temp |= 1 << temp_chan; + break; + } +} + +static int w83795_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i; + u8 tmp; + struct device *dev = &client->dev; + struct w83795_data *data; + int err; + + data = devm_kzalloc(dev, sizeof(struct w83795_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + data->chip_type = id->driver_data; + data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL); + mutex_init(&data->update_lock); + + /* Initialize the chip */ + w83795_init_client(client); + + /* Check which voltages and fans are present */ + data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1) + | (w83795_read(client, W83795_REG_VOLT_CTRL2) << 8); + data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1) + | (w83795_read(client, W83795_REG_FANIN_CTRL2) << 8); + + /* Check which analog temperatures and extra voltages are present */ + tmp = w83795_read(client, W83795_REG_TEMP_CTRL1); + if (tmp & 0x20) + data->enable_dts = 1; + w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 5, 16); + w83795_apply_temp_config(data, tmp & 0x3, 4, 15); + tmp = w83795_read(client, W83795_REG_TEMP_CTRL2); + w83795_apply_temp_config(data, tmp >> 6, 3, 20); + w83795_apply_temp_config(data, (tmp >> 4) & 0x3, 2, 19); + w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 1, 18); + w83795_apply_temp_config(data, tmp & 0x3, 0, 17); + + /* Check DTS enable status */ + if (data->enable_dts) { + if (1 & w83795_read(client, W83795_REG_DTSC)) + data->enable_dts |= 2; + data->has_dts = w83795_read(client, W83795_REG_DTSE); + } + + /* Report PECI Tbase values */ + if (data->enable_dts == 1) { + for (i = 0; i < 8; i++) { + if (!(data->has_dts & (1 << i))) + continue; + tmp = w83795_read(client, W83795_REG_PECI_TBASE(i)); + dev_info(&client->dev, + "PECI agent %d Tbase temperature: %u\n", + i + 1, (unsigned int)tmp & 0x7f); + } + } + + data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f; + + /* pwm and smart fan */ + if (data->chip_type == w83795g) + data->has_pwm = 8; + else + data->has_pwm = 2; + + /* Check if BEEP pin is available */ + if (data->chip_type == w83795g) { + /* The W83795G has a dedicated BEEP pin */ + data->enable_beep = 1; + } else { + /* + * The W83795ADG has a shared pin for OVT# and BEEP, so you + * can't have both + */ + tmp = w83795_read(client, W83795_REG_OVT_CFG); + if ((tmp & OVT_CFG_SEL) == 0) + data->enable_beep = 1; + } + + err = w83795_handle_files(dev, device_create_file); + if (err) + goto exit_remove; + + if (data->chip_type == w83795g) + w83795_check_dynamic_in_limits(client); + + data->hwmon_dev = hwmon_device_register(dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + w83795_handle_files(dev, device_remove_file_wrapper); + return err; +} + +static int w83795_remove(struct i2c_client *client) +{ + struct w83795_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + w83795_handle_files(&client->dev, device_remove_file_wrapper); + + return 0; +} + + +static const struct i2c_device_id w83795_id[] = { + { "w83795g", w83795g }, + { "w83795adg", w83795adg }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83795_id); + +static struct i2c_driver w83795_driver = { + .driver = { + .name = "w83795", + }, + .probe = w83795_probe, + .remove = w83795_remove, + .id_table = w83795_id, + + .class = I2C_CLASS_HWMON, + .detect = w83795_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(w83795_driver); + +MODULE_AUTHOR("Wei Song, Jean Delvare <jdelvare@suse.de>"); +MODULE_DESCRIPTION("W83795G/ADG hardware monitoring driver"); +MODULE_LICENSE("GPL"); |