diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-mpc.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-mpc.c | 955 |
1 files changed, 955 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c new file mode 100644 index 000000000..8de8296d2 --- /dev/null +++ b/drivers/i2c/busses/i2c-mpc.c @@ -0,0 +1,955 @@ +/* + * (C) Copyright 2003-2004 + * Humboldt Solutions Ltd, adrian@humboldt.co.uk. + + * This is a combined i2c adapter and algorithm driver for the + * MPC107/Tsi107 PowerPC northbridge and processors that include + * the same I2C unit (8240, 8245, 85xx). + * + * Release 0.8 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched/signal.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/slab.h> + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/fsl_devices.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <asm/mpc52xx.h> +#include <asm/mpc85xx.h> +#include <sysdev/fsl_soc.h> + +#define DRV_NAME "mpc-i2c" + +#define MPC_I2C_CLOCK_LEGACY 0 +#define MPC_I2C_CLOCK_PRESERVE (~0U) + +#define MPC_I2C_FDR 0x04 +#define MPC_I2C_CR 0x08 +#define MPC_I2C_SR 0x0c +#define MPC_I2C_DR 0x10 +#define MPC_I2C_DFSRR 0x14 + +#define CCR_MEN 0x80 +#define CCR_MIEN 0x40 +#define CCR_MSTA 0x20 +#define CCR_MTX 0x10 +#define CCR_TXAK 0x08 +#define CCR_RSTA 0x04 +#define CCR_RSVD 0x02 + +#define CSR_MCF 0x80 +#define CSR_MAAS 0x40 +#define CSR_MBB 0x20 +#define CSR_MAL 0x10 +#define CSR_SRW 0x04 +#define CSR_MIF 0x02 +#define CSR_RXAK 0x01 + +struct mpc_i2c { + struct device *dev; + void __iomem *base; + u32 interrupt; + wait_queue_head_t queue; + struct i2c_adapter adap; + int irq; + u32 real_clk; +#ifdef CONFIG_PM_SLEEP + u8 fdr, dfsrr; +#endif + struct clk *clk_per; + bool has_errata_A004447; +}; + +struct mpc_i2c_divider { + u16 divider; + u16 fdr; /* including dfsrr */ +}; + +struct mpc_i2c_data { + void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock); +}; + +static inline void writeccr(struct mpc_i2c *i2c, u32 x) +{ + writeb(x, i2c->base + MPC_I2C_CR); +} + +static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) +{ + struct mpc_i2c *i2c = dev_id; + if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) { + /* Read again to allow register to stabilise */ + i2c->interrupt = readb(i2c->base + MPC_I2C_SR); + writeb(0, i2c->base + MPC_I2C_SR); + wake_up(&i2c->queue); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +/* Sometimes 9th clock pulse isn't generated, and slave doesn't release + * the bus, because it wants to send ACK. + * Following sequence of enabling/disabling and sending start/stop generates + * the 9 pulses, each with a START then ending with STOP, so it's all OK. + */ +static void mpc_i2c_fixup(struct mpc_i2c *i2c) +{ + int k; + unsigned long flags; + + for (k = 9; k; k--) { + writeccr(i2c, 0); + writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */ + writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */ + readb(i2c->base + MPC_I2C_DR); /* init xfer */ + udelay(15); /* let it hit the bus */ + local_irq_save(flags); /* should not be delayed further */ + writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */ + readb(i2c->base + MPC_I2C_DR); + if (k != 1) + udelay(5); + local_irq_restore(flags); + } + writeccr(i2c, CCR_MEN); /* Initiate STOP */ + readb(i2c->base + MPC_I2C_DR); + udelay(15); /* Let STOP propagate */ + writeccr(i2c, 0); +} + +static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) +{ + unsigned long orig_jiffies = jiffies; + u32 cmd_err; + int result = 0; + + if (!i2c->irq) { + while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) { + schedule(); + if (time_after(jiffies, orig_jiffies + timeout)) { + dev_dbg(i2c->dev, "timeout\n"); + writeccr(i2c, 0); + result = -ETIMEDOUT; + break; + } + } + cmd_err = readb(i2c->base + MPC_I2C_SR); + writeb(0, i2c->base + MPC_I2C_SR); + } else { + /* Interrupt mode */ + result = wait_event_timeout(i2c->queue, + (i2c->interrupt & CSR_MIF), timeout); + + if (unlikely(!(i2c->interrupt & CSR_MIF))) { + dev_dbg(i2c->dev, "wait timeout\n"); + writeccr(i2c, 0); + result = -ETIMEDOUT; + } + + cmd_err = i2c->interrupt; + i2c->interrupt = 0; + } + + if (result < 0) + return result; + + if (!(cmd_err & CSR_MCF)) { + dev_dbg(i2c->dev, "unfinished\n"); + return -EIO; + } + + if (cmd_err & CSR_MAL) { + dev_dbg(i2c->dev, "MAL\n"); + return -EAGAIN; + } + + if (writing && (cmd_err & CSR_RXAK)) { + dev_dbg(i2c->dev, "No RXAK\n"); + /* generate stop */ + writeccr(i2c, CCR_MEN); + return -ENXIO; + } + return 0; +} + +static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) +{ + void __iomem *addr = i2c->base + MPC_I2C_SR; + u8 val; + + return readb_poll_timeout(addr, val, val & mask, 0, 100); +} + +/* + * Workaround for Erratum A004447. From the P2040CE Rev Q + * + * 1. Set up the frequency divider and sampling rate. + * 2. I2CCR - a0h + * 3. Poll for I2CSR[MBB] to get set. + * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to + * step 5. If MAL is not set, then go to step 13. + * 5. I2CCR - 00h + * 6. I2CCR - 22h + * 7. I2CCR - a2h + * 8. Poll for I2CSR[MBB] to get set. + * 9. Issue read to I2CDR. + * 10. Poll for I2CSR[MIF] to be set. + * 11. I2CCR - 82h + * 12. Workaround complete. Skip the next steps. + * 13. Issue read to I2CDR. + * 14. Poll for I2CSR[MIF] to be set. + * 15. I2CCR - 80h + */ +static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) +{ + int ret; + u32 val; + + writeccr(i2c, CCR_MEN | CCR_MSTA); + ret = i2c_mpc_wait_sr(i2c, CSR_MBB); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); + return; + } + + val = readb(i2c->base + MPC_I2C_SR); + + if (val & CSR_MAL) { + writeccr(i2c, 0x00); + writeccr(i2c, CCR_MSTA | CCR_RSVD); + writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); + ret = i2c_mpc_wait_sr(i2c, CSR_MBB); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); + return; + } + val = readb(i2c->base + MPC_I2C_DR); + ret = i2c_mpc_wait_sr(i2c, CSR_MIF); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); + return; + } + writeccr(i2c, CCR_MEN | CCR_RSVD); + } else { + val = readb(i2c->base + MPC_I2C_DR); + ret = i2c_mpc_wait_sr(i2c, CSR_MIF); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); + return; + } + writeccr(i2c, CCR_MEN); + } +} + +#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) +static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { + {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, + {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, + {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, + {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, + {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, + {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, + {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, + {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, + {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, + {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, + {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, + {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, + {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, + {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, + {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, + {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, + {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, + {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} +}; + +static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, + u32 *real_clk) +{ + const struct mpc_i2c_divider *div = NULL; + unsigned int pvr = mfspr(SPRN_PVR); + u32 divider; + int i; + + if (clock == MPC_I2C_CLOCK_LEGACY) { + /* see below - default fdr = 0x3f -> div = 2048 */ + *real_clk = mpc5xxx_get_bus_frequency(node) / 2048; + return -EINVAL; + } + + /* Determine divider value */ + divider = mpc5xxx_get_bus_frequency(node) / clock; + + /* + * We want to choose an FDR/DFSR that generates an I2C bus speed that + * is equal to or lower than the requested speed. + */ + for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { + div = &mpc_i2c_dividers_52xx[i]; + /* Old MPC5200 rev A CPUs do not support the high bits */ + if (div->fdr & 0xc0 && pvr == 0x80822011) + continue; + if (div->divider >= divider) + break; + } + + *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider; + return (int)div->fdr; +} + +static void mpc_i2c_setup_52xx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock) +{ + int ret, fdr; + + if (clock == MPC_I2C_CLOCK_PRESERVE) { + dev_dbg(i2c->dev, "using fdr %d\n", + readb(i2c->base + MPC_I2C_FDR)); + return; + } + + ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk); + fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ + + writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); + + if (ret >= 0) + dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, + fdr); +} +#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ +static void mpc_i2c_setup_52xx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock) +{ +} +#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ + +#ifdef CONFIG_PPC_MPC512x +static void mpc_i2c_setup_512x(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock) +{ + struct device_node *node_ctrl; + void __iomem *ctrl; + const u32 *pval; + u32 idx; + + /* Enable I2C interrupts for mpc5121 */ + node_ctrl = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-i2c-ctrl"); + if (node_ctrl) { + ctrl = of_iomap(node_ctrl, 0); + if (ctrl) { + /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ + pval = of_get_property(node, "reg", NULL); + idx = (*pval & 0xff) / 0x20; + setbits32(ctrl, 1 << (24 + idx * 2)); + iounmap(ctrl); + } + of_node_put(node_ctrl); + } + + /* The clock setup for the 52xx works also fine for the 512x */ + mpc_i2c_setup_52xx(node, i2c, clock); +} +#else /* CONFIG_PPC_MPC512x */ +static void mpc_i2c_setup_512x(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock) +{ +} +#endif /* CONFIG_PPC_MPC512x */ + +#ifdef CONFIG_FSL_SOC +static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { + {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, + {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, + {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, + {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, + {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, + {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, + {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, + {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, + {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, + {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, + {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, + {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, + {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, + {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, + {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, + {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, + {49152, 0x011e}, {61440, 0x011f} +}; + +static u32 mpc_i2c_get_sec_cfg_8xxx(void) +{ + struct device_node *node; + u32 __iomem *reg; + u32 val = 0; + + node = of_find_node_by_name(NULL, "global-utilities"); + if (node) { + const u32 *prop = of_get_property(node, "reg", NULL); + if (prop) { + /* + * Map and check POR Device Status Register 2 + * (PORDEVSR2) at 0xE0014. Note than while MPC8533 + * and MPC8544 indicate SEC frequency ratio + * configuration as bit 26 in PORDEVSR2, other MPC8xxx + * parts may store it differently or may not have it + * at all. + */ + reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); + if (!reg) + printk(KERN_ERR + "Error: couldn't map PORDEVSR2\n"); + else + val = in_be32(reg) & 0x00000020; /* sec-cfg */ + iounmap(reg); + } + } + of_node_put(node); + + return val; +} + +static u32 mpc_i2c_get_prescaler_8xxx(void) +{ + /* + * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx + * may have prescaler 1, 2, or 3, depending on the power-on + * configuration. + */ + u32 prescaler = 1; + + /* mpc85xx */ + if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2) + || pvr_version_is(PVR_VER_E500MC) + || pvr_version_is(PVR_VER_E5500) + || pvr_version_is(PVR_VER_E6500)) { + unsigned int svr = mfspr(SPRN_SVR); + + if ((SVR_SOC_VER(svr) == SVR_8540) + || (SVR_SOC_VER(svr) == SVR_8541) + || (SVR_SOC_VER(svr) == SVR_8560) + || (SVR_SOC_VER(svr) == SVR_8555) + || (SVR_SOC_VER(svr) == SVR_8610)) + /* the above 85xx SoCs have prescaler 1 */ + prescaler = 1; + else if ((SVR_SOC_VER(svr) == SVR_8533) + || (SVR_SOC_VER(svr) == SVR_8544)) + /* the above 85xx SoCs have prescaler 3 or 2 */ + prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; + else + /* all the other 85xx have prescaler 2 */ + prescaler = 2; + } + + return prescaler; +} + +static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, + u32 *real_clk) +{ + const struct mpc_i2c_divider *div = NULL; + u32 prescaler = mpc_i2c_get_prescaler_8xxx(); + u32 divider; + int i; + + if (clock == MPC_I2C_CLOCK_LEGACY) { + /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ + *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); + return -EINVAL; + } + + divider = fsl_get_sys_freq() / clock / prescaler; + + pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", + fsl_get_sys_freq(), clock, divider); + + /* + * We want to choose an FDR/DFSR that generates an I2C bus speed that + * is equal to or lower than the requested speed. + */ + for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { + div = &mpc_i2c_dividers_8xxx[i]; + if (div->divider >= divider) + break; + } + + *real_clk = fsl_get_sys_freq() / prescaler / div->divider; + return div ? (int)div->fdr : -EINVAL; +} + +static void mpc_i2c_setup_8xxx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock) +{ + int ret, fdr; + + if (clock == MPC_I2C_CLOCK_PRESERVE) { + dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", + readb(i2c->base + MPC_I2C_DFSRR), + readb(i2c->base + MPC_I2C_FDR)); + return; + } + + ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk); + fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ + + writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); + writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", + i2c->real_clk, fdr >> 8, fdr & 0xff); +} + +#else /* !CONFIG_FSL_SOC */ +static void mpc_i2c_setup_8xxx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock) +{ +} +#endif /* CONFIG_FSL_SOC */ + +static void mpc_i2c_start(struct mpc_i2c *i2c) +{ + /* Clear arbitration */ + writeb(0, i2c->base + MPC_I2C_SR); + /* Start with MEN */ + writeccr(i2c, CCR_MEN); +} + +static void mpc_i2c_stop(struct mpc_i2c *i2c) +{ + writeccr(i2c, CCR_MEN); +} + +static int mpc_write(struct mpc_i2c *i2c, int target, + const u8 *data, int length, int restart) +{ + int i, result; + unsigned timeout = i2c->adap.timeout; + u32 flags = restart ? CCR_RSTA : 0; + + /* Start as master */ + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); + /* Write target byte */ + writeb((target << 1), i2c->base + MPC_I2C_DR); + + result = i2c_wait(i2c, timeout, 1); + if (result < 0) + return result; + + for (i = 0; i < length; i++) { + /* Write data byte */ + writeb(data[i], i2c->base + MPC_I2C_DR); + + result = i2c_wait(i2c, timeout, 1); + if (result < 0) + return result; + } + + return 0; +} + +static int mpc_read(struct mpc_i2c *i2c, int target, + u8 *data, int length, int restart, bool recv_len) +{ + unsigned timeout = i2c->adap.timeout; + int i, result; + u32 flags = restart ? CCR_RSTA : 0; + + /* Switch to read - restart */ + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); + /* Write target address byte - this time with the read flag set */ + writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); + + result = i2c_wait(i2c, timeout, 1); + if (result < 0) + return result; + + if (length) { + if (length == 1 && !recv_len) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); + else + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); + /* Dummy read */ + readb(i2c->base + MPC_I2C_DR); + } + + for (i = 0; i < length; i++) { + u8 byte; + + result = i2c_wait(i2c, timeout, 0); + if (result < 0) + return result; + + /* + * For block reads, we have to know the total length (1st byte) + * before we can determine if we are done. + */ + if (i || !recv_len) { + /* Generate txack on next to last byte */ + if (i == length - 2) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA + | CCR_TXAK); + /* Do not generate stop on last byte */ + if (i == length - 1) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA + | CCR_MTX); + } + + byte = readb(i2c->base + MPC_I2C_DR); + + /* + * Adjust length if first received byte is length. + * The length is 1 length byte plus actually data length + */ + if (i == 0 && recv_len) { + if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + length += byte; + /* + * For block reads, generate txack here if data length + * is 1 byte (total length is 2 bytes). + */ + if (length == 2) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA + | CCR_TXAK); + } + data[i] = byte; + } + + return length; +} + +static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct i2c_msg *pmsg; + int i; + int ret = 0; + unsigned long orig_jiffies = jiffies; + struct mpc_i2c *i2c = i2c_get_adapdata(adap); + + mpc_i2c_start(i2c); + + /* Allow bus up to 1s to become not busy */ + while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { + if (signal_pending(current)) { + dev_dbg(i2c->dev, "Interrupted\n"); + writeccr(i2c, 0); + return -EINTR; + } + if (time_after(jiffies, orig_jiffies + HZ)) { + u8 status = readb(i2c->base + MPC_I2C_SR); + + dev_dbg(i2c->dev, "timeout\n"); + if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { + writeb(status & ~CSR_MAL, + i2c->base + MPC_I2C_SR); + i2c_recover_bus(&i2c->adap); + } + return -EIO; + } + schedule(); + } + + for (i = 0; ret >= 0 && i < num; i++) { + pmsg = &msgs[i]; + dev_dbg(i2c->dev, + "Doing %s %d bytes to 0x%02x - %d of %d messages\n", + pmsg->flags & I2C_M_RD ? "read" : "write", + pmsg->len, pmsg->addr, i + 1, num); + if (pmsg->flags & I2C_M_RD) { + bool recv_len = pmsg->flags & I2C_M_RECV_LEN; + + ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i, + recv_len); + if (recv_len && ret > 0) + pmsg->len = ret; + } else { + ret = + mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); + } + } + mpc_i2c_stop(i2c); /* Initiate STOP */ + orig_jiffies = jiffies; + /* Wait until STOP is seen, allow up to 1 s */ + while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { + if (time_after(jiffies, orig_jiffies + HZ)) { + u8 status = readb(i2c->base + MPC_I2C_SR); + + dev_dbg(i2c->dev, "timeout\n"); + if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { + writeb(status & ~CSR_MAL, + i2c->base + MPC_I2C_SR); + i2c_recover_bus(&i2c->adap); + } + return -EIO; + } + cond_resched(); + } + return (ret < 0) ? ret : num; +} + +static u32 mpc_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL + | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; +} + +static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) +{ + struct mpc_i2c *i2c = i2c_get_adapdata(adap); + + if (i2c->has_errata_A004447) + mpc_i2c_fixup_A004447(i2c); + else + mpc_i2c_fixup(i2c); + + return 0; +} + +static const struct i2c_algorithm mpc_algo = { + .master_xfer = mpc_xfer, + .functionality = mpc_functionality, +}; + +static struct i2c_adapter mpc_ops = { + .owner = THIS_MODULE, + .algo = &mpc_algo, + .timeout = HZ, +}; + +static struct i2c_bus_recovery_info fsl_i2c_recovery_info = { + .recover_bus = fsl_i2c_bus_recovery, +}; + +static const struct of_device_id mpc_i2c_of_match[]; +static int fsl_i2c_probe(struct platform_device *op) +{ + const struct of_device_id *match; + struct mpc_i2c *i2c; + const u32 *prop; + u32 clock = MPC_I2C_CLOCK_LEGACY; + int result = 0; + int plen; + struct resource res; + struct clk *clk; + int err; + + match = of_match_device(mpc_i2c_of_match, &op->dev); + if (!match) + return -EINVAL; + + i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + i2c->dev = &op->dev; /* for debug and error output */ + + init_waitqueue_head(&i2c->queue); + + i2c->base = of_iomap(op->dev.of_node, 0); + if (!i2c->base) { + dev_err(i2c->dev, "failed to map controller\n"); + result = -ENOMEM; + goto fail_map; + } + + i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0); + if (i2c->irq) { /* no i2c->irq implies polling */ + result = request_irq(i2c->irq, mpc_i2c_isr, + IRQF_SHARED, "i2c-mpc", i2c); + if (result < 0) { + dev_err(i2c->dev, "failed to attach interrupt\n"); + goto fail_request; + } + } + + /* + * enable clock for the I2C peripheral (non fatal), + * keep a reference upon successful allocation + */ + clk = devm_clk_get(&op->dev, NULL); + if (!IS_ERR(clk)) { + err = clk_prepare_enable(clk); + if (err) { + dev_err(&op->dev, "failed to enable clock\n"); + goto fail_request; + } else { + i2c->clk_per = clk; + } + } + + if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { + clock = MPC_I2C_CLOCK_PRESERVE; + } else { + prop = of_get_property(op->dev.of_node, "clock-frequency", + &plen); + if (prop && plen == sizeof(u32)) + clock = *prop; + } + + if (match->data) { + const struct mpc_i2c_data *data = match->data; + data->setup(op->dev.of_node, i2c, clock); + } else { + /* Backwards compatibility */ + if (of_get_property(op->dev.of_node, "dfsrr", NULL)) + mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock); + } + + prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen); + if (prop && plen == sizeof(u32)) { + mpc_ops.timeout = *prop * HZ / 1000000; + if (mpc_ops.timeout < 5) + mpc_ops.timeout = 5; + } + dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); + + platform_set_drvdata(op, i2c); + if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) + i2c->has_errata_A004447 = true; + + i2c->adap = mpc_ops; + of_address_to_resource(op->dev.of_node, 0, &res); + scnprintf(i2c->adap.name, sizeof(i2c->adap.name), + "MPC adapter at 0x%llx", (unsigned long long)res.start); + i2c_set_adapdata(&i2c->adap, i2c); + i2c->adap.dev.parent = &op->dev; + i2c->adap.dev.of_node = of_node_get(op->dev.of_node); + i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info; + + result = i2c_add_adapter(&i2c->adap); + if (result < 0) + goto fail_add; + + return result; + + fail_add: + if (i2c->clk_per) + clk_disable_unprepare(i2c->clk_per); + free_irq(i2c->irq, i2c); + fail_request: + irq_dispose_mapping(i2c->irq); + iounmap(i2c->base); + fail_map: + kfree(i2c); + return result; +}; + +static int fsl_i2c_remove(struct platform_device *op) +{ + struct mpc_i2c *i2c = platform_get_drvdata(op); + + i2c_del_adapter(&i2c->adap); + + if (i2c->clk_per) + clk_disable_unprepare(i2c->clk_per); + + if (i2c->irq) + free_irq(i2c->irq, i2c); + + irq_dispose_mapping(i2c->irq); + iounmap(i2c->base); + kfree(i2c); + return 0; +}; + +#ifdef CONFIG_PM_SLEEP +static int mpc_i2c_suspend(struct device *dev) +{ + struct mpc_i2c *i2c = dev_get_drvdata(dev); + + i2c->fdr = readb(i2c->base + MPC_I2C_FDR); + i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); + + return 0; +} + +static int mpc_i2c_resume(struct device *dev) +{ + struct mpc_i2c *i2c = dev_get_drvdata(dev); + + writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); + writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); +#define MPC_I2C_PM_OPS (&mpc_i2c_pm_ops) +#else +#define MPC_I2C_PM_OPS NULL +#endif + +static const struct mpc_i2c_data mpc_i2c_data_512x = { + .setup = mpc_i2c_setup_512x, +}; + +static const struct mpc_i2c_data mpc_i2c_data_52xx = { + .setup = mpc_i2c_setup_52xx, +}; + +static const struct mpc_i2c_data mpc_i2c_data_8313 = { + .setup = mpc_i2c_setup_8xxx, +}; + +static const struct mpc_i2c_data mpc_i2c_data_8543 = { + .setup = mpc_i2c_setup_8xxx, +}; + +static const struct mpc_i2c_data mpc_i2c_data_8544 = { + .setup = mpc_i2c_setup_8xxx, +}; + +static const struct of_device_id mpc_i2c_of_match[] = { + {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, + {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, + {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, + {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, + /* Backward compatibility */ + {.compatible = "fsl-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); + +/* Structure for a device driver */ +static struct platform_driver mpc_i2c_driver = { + .probe = fsl_i2c_probe, + .remove = fsl_i2c_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = mpc_i2c_of_match, + .pm = MPC_I2C_PM_OPS, + }, +}; + +module_platform_driver(mpc_i2c_driver); + +MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); +MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " + "MPC824x/83xx/85xx/86xx/512x/52xx processors"); +MODULE_LICENSE("GPL"); |