diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-sh_mobile.c')
-rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 994 |
1 files changed, 994 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c new file mode 100644 index 000000000..ddcfb6d34 --- /dev/null +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -0,0 +1,994 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SuperH Mobile I2C Controller + * + * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com> + * + * Copyright (C) 2008 Magnus Damm + * + * Portions of the code based on out-of-tree driver i2c-sh7343.c + * Copyright (c) 2006 Carlos Munoz <carlos@kenati.com> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +/* Transmit operation: */ +/* */ +/* 0 byte transmit */ +/* BUS: S A8 ACK P(*) */ +/* IRQ: DTE WAIT */ +/* ICIC: */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 */ +/* */ +/* 1 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK P(*) */ +/* IRQ: DTE WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) */ +/* */ +/* 2 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P(*) */ +/* IRQ: DTE WAIT WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) D8(2) */ +/* */ +/* 3 bytes or more, +---------+ gets repeated */ +/* */ +/* */ +/* Receive operation: */ +/* */ +/* 0 byte receive - not supported since slave may hold SDA low */ +/* */ +/* 1 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK P(*) */ +/* IRQ: DTE WAIT | WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) */ +/* */ +/* 2 byte receive [TX]| [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P(*) */ +/* IRQ: DTE WAIT | WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) */ +/* */ +/* 3 byte receive [TX] | [RX] (*) */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) D8(3) */ +/* */ +/* 4 bytes or more, this part is repeated +---------+ */ +/* */ +/* */ +/* Interrupt order and BUSY flag */ +/* ___ _ */ +/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */ +/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */ +/* */ +/* S D7 D6 D5 D4 D3 D2 D1 D0 P(*) */ +/* ___ */ +/* WAIT IRQ ________________________________/ \___________ */ +/* TACK IRQ ____________________________________/ \_______ */ +/* DTE IRQ __________________________________________/ \_ */ +/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ +/* _______________________________________________ */ +/* BUSY __/ \_ */ +/* */ +/* (*) The STOP condition is only sent by the master at the end of the last */ +/* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */ +/* only cleared after the STOP condition, so, between messages we have to */ +/* poll for the DTE bit. */ +/* */ + +enum sh_mobile_i2c_op { + OP_START = 0, + OP_TX_FIRST, + OP_TX, + OP_TX_STOP, + OP_TX_TO_RX, + OP_RX, + OP_RX_STOP, + OP_RX_STOP_DATA, +}; + +struct sh_mobile_i2c_data { + struct device *dev; + void __iomem *reg; + struct i2c_adapter adap; + unsigned long bus_speed; + unsigned int clks_per_count; + struct clk *clk; + u_int8_t icic; + u_int8_t flags; + u_int16_t iccl; + u_int16_t icch; + + spinlock_t lock; + wait_queue_head_t wait; + struct i2c_msg *msg; + int pos; + int sr; + bool send_stop; + bool stop_after_dma; + + struct resource *res; + struct dma_chan *dma_tx; + struct dma_chan *dma_rx; + struct scatterlist sg; + enum dma_data_direction dma_direction; + u8 *dma_buf; +}; + +struct sh_mobile_dt_config { + int clks_per_count; + int (*setup)(struct sh_mobile_i2c_data *pd); +}; + +#define IIC_FLAG_HAS_ICIC67 (1 << 0) + +#define STANDARD_MODE 100000 +#define FAST_MODE 400000 + +/* Register offsets */ +#define ICDR 0x00 +#define ICCR 0x04 +#define ICSR 0x08 +#define ICIC 0x0c +#define ICCL 0x10 +#define ICCH 0x14 +#define ICSTART 0x70 + +/* Register bits */ +#define ICCR_ICE 0x80 +#define ICCR_RACK 0x40 +#define ICCR_TRS 0x10 +#define ICCR_BBSY 0x04 +#define ICCR_SCP 0x01 + +#define ICSR_SCLM 0x80 +#define ICSR_SDAM 0x40 +#define SW_DONE 0x20 +#define ICSR_BUSY 0x10 +#define ICSR_AL 0x08 +#define ICSR_TACK 0x04 +#define ICSR_WAIT 0x02 +#define ICSR_DTE 0x01 + +#define ICIC_ICCLB8 0x80 +#define ICIC_ICCHB8 0x40 +#define ICIC_TDMAE 0x20 +#define ICIC_RDMAE 0x10 +#define ICIC_ALE 0x08 +#define ICIC_TACKE 0x04 +#define ICIC_WAITE 0x02 +#define ICIC_DTEE 0x01 + +#define ICSTART_ICSTART 0x10 + +static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data) +{ + if (offs == ICIC) + data |= pd->icic; + + iowrite8(data, pd->reg + offs); +} + +static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs) +{ + return ioread8(pd->reg + offs); +} + +static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs, + unsigned char set, unsigned char clr) +{ + iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr); +} + +static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf) +{ + /* + * Conditional expression: + * ICCL >= COUNT_CLK * (tLOW + tf) + * + * SH-Mobile IIC hardware starts counting the LOW period of + * the SCL signal (tLOW) as soon as it pulls the SCL line. + * In order to meet the tLOW timing spec, we need to take into + * account the fall time of SCL signal (tf). Default tf value + * should be 0.3 us, for safety. + */ + return (((count_khz * (tLOW + tf)) + 5000) / 10000); +} + +static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf) +{ + /* + * Conditional expression: + * ICCH >= COUNT_CLK * (tHIGH + tf) + * + * SH-Mobile IIC hardware is aware of SCL transition period 'tr', + * and can ignore it. SH-Mobile IIC controller starts counting + * the HIGH period of the SCL signal (tHIGH) after the SCL input + * voltage increases at VIH. + * + * Afterward it turned out calculating ICCH using only tHIGH spec + * will result in violation of the tHD;STA timing spec. We need + * to take into account the fall time of SDA signal (tf) at START + * condition, in order to meet both tHIGH and tHD;STA specs. + */ + return (((count_khz * (tHIGH + tf)) + 5000) / 10000); +} + +static int sh_mobile_i2c_check_timing(struct sh_mobile_i2c_data *pd) +{ + u16 max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff; + + if (pd->iccl > max_val || pd->icch > max_val) { + dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n", + pd->iccl, pd->icch); + return -EINVAL; + } + + /* one more bit of ICCL in ICIC */ + if (pd->iccl & 0x100) + pd->icic |= ICIC_ICCLB8; + else + pd->icic &= ~ICIC_ICCLB8; + + /* one more bit of ICCH in ICIC */ + if (pd->icch & 0x100) + pd->icic |= ICIC_ICCHB8; + else + pd->icic &= ~ICIC_ICCHB8; + + dev_dbg(pd->dev, "timing values: L/H=0x%x/0x%x\n", pd->iccl, pd->icch); + return 0; +} + +static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) +{ + unsigned long i2c_clk_khz; + u32 tHIGH, tLOW, tf; + + i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count; + + if (pd->bus_speed == STANDARD_MODE) { + tLOW = 47; /* tLOW = 4.7 us */ + tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */ + tf = 3; /* tf = 0.3 us */ + } else if (pd->bus_speed == FAST_MODE) { + tLOW = 13; /* tLOW = 1.3 us */ + tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */ + tf = 3; /* tf = 0.3 us */ + } else { + dev_err(pd->dev, "unrecognized bus speed %lu Hz\n", + pd->bus_speed); + return -EINVAL; + } + + pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf); + pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf); + + return sh_mobile_i2c_check_timing(pd); +} + +static int sh_mobile_i2c_v2_init(struct sh_mobile_i2c_data *pd) +{ + unsigned long clks_per_cycle; + + /* L = 5, H = 4, L + H = 9 */ + clks_per_cycle = clk_get_rate(pd->clk) / pd->bus_speed; + pd->iccl = DIV_ROUND_UP(clks_per_cycle * 5 / 9 - 1, pd->clks_per_count); + pd->icch = DIV_ROUND_UP(clks_per_cycle * 4 / 9 - 5, pd->clks_per_count); + + return sh_mobile_i2c_check_timing(pd); +} + +static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, + enum sh_mobile_i2c_op op, unsigned char data) +{ + unsigned char ret = 0; + unsigned long flags; + + dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data); + + spin_lock_irqsave(&pd->lock, flags); + + switch (op) { + case OP_START: /* issue start and trigger DTE interrupt */ + iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY); + break; + case OP_TX_FIRST: /* disable DTE interrupt and write data */ + iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE); + iic_wr(pd, ICDR, data); + break; + case OP_TX: /* write data */ + iic_wr(pd, ICDR, data); + break; + case OP_TX_STOP: /* issue a stop (or rep_start) */ + iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS + : ICCR_ICE | ICCR_TRS | ICCR_BBSY); + break; + case OP_TX_TO_RX: /* select read mode */ + iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP); + break; + case OP_RX: /* just read data */ + ret = iic_rd(pd, ICDR); + break; + case OP_RX_STOP: /* enable DTE interrupt, issue stop */ + iic_wr(pd, ICIC, + ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); + iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK); + break; + case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */ + iic_wr(pd, ICIC, + ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); + ret = iic_rd(pd, ICDR); + iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK); + break; + } + + spin_unlock_irqrestore(&pd->lock, flags); + + dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret); + return ret; +} + +static bool sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd) +{ + return pd->pos == -1; +} + +static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd, + unsigned char *buf) +{ + switch (pd->pos) { + case -1: + *buf = i2c_8bit_addr_from_msg(pd->msg); + break; + default: + *buf = pd->msg->buf[pd->pos]; + } +} + +static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + + if (pd->pos == pd->msg->len) { + i2c_op(pd, OP_TX_STOP, 0); + return 1; + } + + sh_mobile_i2c_get_data(pd, &data); + i2c_op(pd, sh_mobile_i2c_is_first_byte(pd) ? OP_TX_FIRST : OP_TX, data); + + pd->pos++; + return 0; +} + +static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + int real_pos; + + do { + if (pd->pos <= -1) { + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + break; + } + + if (pd->pos == 0) { + i2c_op(pd, OP_TX_TO_RX, 0); + break; + } + + real_pos = pd->pos - 2; + + if (pd->pos == pd->msg->len) { + if (pd->stop_after_dma) { + /* Simulate PIO end condition after DMA transfer */ + i2c_op(pd, OP_RX_STOP, 0); + pd->pos++; + break; + } + + if (real_pos < 0) { + i2c_op(pd, OP_RX_STOP, 0); + break; + } + data = i2c_op(pd, OP_RX_STOP_DATA, 0); + } else if (real_pos >= 0) { + data = i2c_op(pd, OP_RX, 0); + } + + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; + } while (0); + + pd->pos++; + return pd->pos == (pd->msg->len + 2); +} + +static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) +{ + struct sh_mobile_i2c_data *pd = dev_id; + unsigned char sr; + int wakeup = 0; + + sr = iic_rd(pd, ICSR); + pd->sr |= sr; /* remember state */ + + dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr, + (pd->msg->flags & I2C_M_RD) ? "read" : "write", + pd->pos, pd->msg->len); + + /* Kick off TxDMA after preface was done */ + if (pd->dma_direction == DMA_TO_DEVICE && pd->pos == 0) + iic_set_clr(pd, ICIC, ICIC_TDMAE, 0); + else if (sr & (ICSR_AL | ICSR_TACK)) + /* don't interrupt transaction - continue to issue stop */ + iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK)); + else if (pd->msg->flags & I2C_M_RD) + wakeup = sh_mobile_i2c_isr_rx(pd); + else + wakeup = sh_mobile_i2c_isr_tx(pd); + + /* Kick off RxDMA after preface was done */ + if (pd->dma_direction == DMA_FROM_DEVICE && pd->pos == 1) + iic_set_clr(pd, ICIC, ICIC_RDMAE, 0); + + if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */ + iic_wr(pd, ICSR, sr & ~ICSR_WAIT); + + if (wakeup) { + pd->sr |= SW_DONE; + wake_up(&pd->wait); + } + + /* defeat write posting to avoid spurious WAIT interrupts */ + iic_rd(pd, ICSR); + + return IRQ_HANDLED; +} + +static void sh_mobile_i2c_dma_unmap(struct sh_mobile_i2c_data *pd) +{ + struct dma_chan *chan = pd->dma_direction == DMA_FROM_DEVICE + ? pd->dma_rx : pd->dma_tx; + + dma_unmap_single(chan->device->dev, sg_dma_address(&pd->sg), + pd->msg->len, pd->dma_direction); + + pd->dma_direction = DMA_NONE; +} + +static void sh_mobile_i2c_cleanup_dma(struct sh_mobile_i2c_data *pd) +{ + if (pd->dma_direction == DMA_NONE) + return; + else if (pd->dma_direction == DMA_FROM_DEVICE) + dmaengine_terminate_all(pd->dma_rx); + else if (pd->dma_direction == DMA_TO_DEVICE) + dmaengine_terminate_all(pd->dma_tx); + + sh_mobile_i2c_dma_unmap(pd); +} + +static void sh_mobile_i2c_dma_callback(void *data) +{ + struct sh_mobile_i2c_data *pd = data; + + sh_mobile_i2c_dma_unmap(pd); + pd->pos = pd->msg->len; + pd->stop_after_dma = true; + + iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE); +} + +static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev, + enum dma_transfer_direction dir, dma_addr_t port_addr) +{ + struct dma_chan *chan; + struct dma_slave_config cfg; + char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx"; + int ret; + + chan = dma_request_slave_channel_reason(dev, chan_name); + if (IS_ERR(chan)) { + dev_dbg(dev, "request_channel failed for %s (%ld)\n", chan_name, + PTR_ERR(chan)); + return chan; + } + + memset(&cfg, 0, sizeof(cfg)); + cfg.direction = dir; + if (dir == DMA_MEM_TO_DEV) { + cfg.dst_addr = port_addr; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { + cfg.src_addr = port_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) { + dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret); + dma_release_channel(chan); + return ERR_PTR(ret); + } + + dev_dbg(dev, "got DMA channel for %s\n", chan_name); + return chan; +} + +static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd) +{ + bool read = pd->msg->flags & I2C_M_RD; + enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + struct dma_chan *chan = read ? pd->dma_rx : pd->dma_tx; + struct dma_async_tx_descriptor *txdesc; + dma_addr_t dma_addr; + dma_cookie_t cookie; + + if (PTR_ERR(chan) == -EPROBE_DEFER) { + if (read) + chan = pd->dma_rx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM, + pd->res->start + ICDR); + else + chan = pd->dma_tx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV, + pd->res->start + ICDR); + } + + if (IS_ERR(chan)) + return; + + dma_addr = dma_map_single(chan->device->dev, pd->dma_buf, pd->msg->len, dir); + if (dma_mapping_error(chan->device->dev, dma_addr)) { + dev_dbg(pd->dev, "dma map failed, using PIO\n"); + return; + } + + sg_dma_len(&pd->sg) = pd->msg->len; + sg_dma_address(&pd->sg) = dma_addr; + + pd->dma_direction = dir; + + txdesc = dmaengine_prep_slave_sg(chan, &pd->sg, 1, + read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) { + dev_dbg(pd->dev, "dma prep slave sg failed, using PIO\n"); + sh_mobile_i2c_cleanup_dma(pd); + return; + } + + txdesc->callback = sh_mobile_i2c_dma_callback; + txdesc->callback_param = pd; + + cookie = dmaengine_submit(txdesc); + if (dma_submit_error(cookie)) { + dev_dbg(pd->dev, "submitting dma failed, using PIO\n"); + sh_mobile_i2c_cleanup_dma(pd); + return; + } + + dma_async_issue_pending(chan); +} + +static void start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg, + bool do_init) +{ + if (do_init) { + /* Initialize channel registers */ + iic_wr(pd, ICCR, ICCR_SCP); + + /* Enable channel and configure rx ack */ + iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP); + + /* Set the clock */ + iic_wr(pd, ICCL, pd->iccl & 0xff); + iic_wr(pd, ICCH, pd->icch & 0xff); + } + + pd->msg = usr_msg; + pd->pos = -1; + pd->sr = 0; + + pd->dma_buf = i2c_get_dma_safe_msg_buf(pd->msg, 8); + if (pd->dma_buf) + sh_mobile_i2c_xfer_dma(pd); + + /* Enable all interrupts to begin with */ + iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); +} + +static int poll_dte(struct sh_mobile_i2c_data *pd) +{ + int i; + + for (i = 1000; i; i--) { + u_int8_t val = iic_rd(pd, ICSR); + + if (val & ICSR_DTE) + break; + + if (val & ICSR_TACK) + return -ENXIO; + + udelay(10); + } + + return i ? 0 : -ETIMEDOUT; +} + +static int poll_busy(struct sh_mobile_i2c_data *pd) +{ + int i; + + for (i = 1000; i; i--) { + u_int8_t val = iic_rd(pd, ICSR); + + dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr); + + /* the interrupt handler may wake us up before the + * transfer is finished, so poll the hardware + * until we're done. + */ + if (!(val & ICSR_BUSY)) { + /* handle missing acknowledge and arbitration lost */ + val |= pd->sr; + if (val & ICSR_TACK) + return -ENXIO; + if (val & ICSR_AL) + return -EAGAIN; + break; + } + + udelay(10); + } + + return i ? 0 : -ETIMEDOUT; +} + +static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter); + struct i2c_msg *msg; + int err = 0; + int i; + long timeout; + + /* Wake up device and enable clock */ + pm_runtime_get_sync(pd->dev); + + /* Process all messages */ + for (i = 0; i < num; i++) { + bool do_start = pd->send_stop || !i; + msg = &msgs[i]; + pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP; + pd->stop_after_dma = false; + + start_ch(pd, msg, do_start); + + if (do_start) + i2c_op(pd, OP_START, 0); + + /* The interrupt handler takes care of the rest... */ + timeout = wait_event_timeout(pd->wait, + pd->sr & (ICSR_TACK | SW_DONE), + adapter->timeout); + + /* 'stop_after_dma' tells if DMA transfer was complete */ + i2c_put_dma_safe_msg_buf(pd->dma_buf, pd->msg, pd->stop_after_dma); + + if (!timeout) { + dev_err(pd->dev, "Transfer request timed out\n"); + if (pd->dma_direction != DMA_NONE) + sh_mobile_i2c_cleanup_dma(pd); + + err = -ETIMEDOUT; + break; + } + + if (pd->send_stop) + err = poll_busy(pd); + else + err = poll_dte(pd); + if (err < 0) + break; + } + + /* Disable channel */ + iic_wr(pd, ICCR, ICCR_SCP); + + /* Disable clock and mark device as idle */ + pm_runtime_put_sync(pd->dev); + + return err ?: num; +} + +static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING; +} + +static const struct i2c_algorithm sh_mobile_i2c_algorithm = { + .functionality = sh_mobile_i2c_func, + .master_xfer = sh_mobile_i2c_xfer, +}; + +static const struct i2c_adapter_quirks sh_mobile_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN_READ, +}; + +/* + * r8a7740 chip has lasting errata on I2C I/O pad reset. + * this is work-around for it. + */ +static int sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd) +{ + iic_set_clr(pd, ICCR, ICCR_ICE, 0); + iic_rd(pd, ICCR); /* dummy read */ + + iic_set_clr(pd, ICSTART, ICSTART_ICSTART, 0); + iic_rd(pd, ICSTART); /* dummy read */ + + udelay(10); + + iic_wr(pd, ICCR, ICCR_SCP); + iic_wr(pd, ICSTART, 0); + + udelay(10); + + iic_wr(pd, ICCR, ICCR_TRS); + udelay(10); + iic_wr(pd, ICCR, 0); + udelay(10); + iic_wr(pd, ICCR, ICCR_TRS); + udelay(10); + + return sh_mobile_i2c_init(pd); +} + +static const struct sh_mobile_dt_config default_dt_config = { + .clks_per_count = 1, + .setup = sh_mobile_i2c_init, +}; + +static const struct sh_mobile_dt_config fast_clock_dt_config = { + .clks_per_count = 2, + .setup = sh_mobile_i2c_init, +}; + +static const struct sh_mobile_dt_config v2_freq_calc_dt_config = { + .clks_per_count = 2, + .setup = sh_mobile_i2c_v2_init, +}; + +static const struct sh_mobile_dt_config r8a7740_dt_config = { + .clks_per_count = 1, + .setup = sh_mobile_i2c_r8a7740_workaround, +}; + +static const struct of_device_id sh_mobile_i2c_dt_ids[] = { + { .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config }, + { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config }, + { .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config }, + { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config }, + { .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config }, + { .compatible = "renesas,rmobile-iic", .data = &default_dt_config }, + {}, +}; +MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids); + +static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd) +{ + if (!IS_ERR(pd->dma_tx)) { + dma_release_channel(pd->dma_tx); + pd->dma_tx = ERR_PTR(-EPROBE_DEFER); + } + + if (!IS_ERR(pd->dma_rx)) { + dma_release_channel(pd->dma_rx); + pd->dma_rx = ERR_PTR(-EPROBE_DEFER); + } +} + +static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile_i2c_data *pd) +{ + struct resource *res; + resource_size_t n; + int k = 0, ret; + + while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) { + for (n = res->start; n <= res->end; n++) { + ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr, + 0, dev_name(&dev->dev), pd); + if (ret) { + dev_err(&dev->dev, "cannot request IRQ %pa\n", &n); + return ret; + } + } + k++; + } + + return k > 0 ? 0 : -ENOENT; +} + +static int sh_mobile_i2c_probe(struct platform_device *dev) +{ + struct sh_mobile_i2c_data *pd; + struct i2c_adapter *adap; + struct resource *res; + const struct sh_mobile_dt_config *config; + int ret; + u32 bus_speed; + + pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + pd->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(pd->clk)) { + dev_err(&dev->dev, "cannot get clock\n"); + return PTR_ERR(pd->clk); + } + + ret = sh_mobile_i2c_hook_irqs(dev, pd); + if (ret) + return ret; + + pd->dev = &dev->dev; + platform_set_drvdata(dev, pd); + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + + pd->res = res; + pd->reg = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(pd->reg)) + return PTR_ERR(pd->reg); + + ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed); + pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed; + pd->clks_per_count = 1; + + /* Newer variants come with two new bits in ICIC */ + if (resource_size(res) > 0x17) + pd->flags |= IIC_FLAG_HAS_ICIC67; + + pm_runtime_enable(&dev->dev); + pm_runtime_get_sync(&dev->dev); + + config = of_device_get_match_data(&dev->dev); + if (config) { + pd->clks_per_count = config->clks_per_count; + ret = config->setup(pd); + } else { + ret = sh_mobile_i2c_init(pd); + } + + pm_runtime_put_sync(&dev->dev); + if (ret) + return ret; + + /* Init DMA */ + sg_init_table(&pd->sg, 1); + pd->dma_direction = DMA_NONE; + pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER); + + /* setup the private data */ + adap = &pd->adap; + i2c_set_adapdata(adap, pd); + + adap->owner = THIS_MODULE; + adap->algo = &sh_mobile_i2c_algorithm; + adap->quirks = &sh_mobile_i2c_quirks; + adap->dev.parent = &dev->dev; + adap->retries = 5; + adap->nr = dev->id; + adap->dev.of_node = dev->dev.of_node; + + strlcpy(adap->name, dev->name, sizeof(adap->name)); + + spin_lock_init(&pd->lock); + init_waitqueue_head(&pd->wait); + + ret = i2c_add_numbered_adapter(adap); + if (ret < 0) { + sh_mobile_i2c_release_dma(pd); + return ret; + } + + dev_info(&dev->dev, "I2C adapter %d, bus speed %lu Hz\n", adap->nr, pd->bus_speed); + + return 0; +} + +static int sh_mobile_i2c_remove(struct platform_device *dev) +{ + struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); + + i2c_del_adapter(&pd->adap); + sh_mobile_i2c_release_dma(pd); + pm_runtime_disable(&dev->dev); + return 0; +} + +static int sh_mobile_i2c_runtime_nop(struct device *dev) +{ + /* Runtime PM callback shared between ->runtime_suspend() + * and ->runtime_resume(). Simply returns success. + * + * This driver re-initializes all registers after + * pm_runtime_get_sync() anyway so there is no need + * to save and restore registers here. + */ + return 0; +} + +static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { + .runtime_suspend = sh_mobile_i2c_runtime_nop, + .runtime_resume = sh_mobile_i2c_runtime_nop, +}; + +static struct platform_driver sh_mobile_i2c_driver = { + .driver = { + .name = "i2c-sh_mobile", + .pm = &sh_mobile_i2c_dev_pm_ops, + .of_match_table = sh_mobile_i2c_dt_ids, + }, + .probe = sh_mobile_i2c_probe, + .remove = sh_mobile_i2c_remove, +}; + +static int __init sh_mobile_i2c_adap_init(void) +{ + return platform_driver_register(&sh_mobile_i2c_driver); +} +subsys_initcall(sh_mobile_i2c_adap_init); + +static void __exit sh_mobile_i2c_adap_exit(void) +{ + platform_driver_unregister(&sh_mobile_i2c_driver); +} +module_exit(sh_mobile_i2c_adap_exit); + +MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver"); +MODULE_AUTHOR("Magnus Damm and Wolfram Sang"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:i2c-sh_mobile"); |