diff options
Diffstat (limited to 'drivers/input/keyboard')
65 files changed, 27440 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig new file mode 100644 index 000000000..4713957b0 --- /dev/null +++ b/drivers/input/keyboard/Kconfig @@ -0,0 +1,759 @@ +# +# Input core configuration +# +menuconfig INPUT_KEYBOARD + bool "Keyboards" + default y + help + Say Y here, and a list of supported keyboards will be displayed. + This option doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_KEYBOARD + +config KEYBOARD_ADC + tristate "ADC Ladder Buttons" + depends on IIO + select INPUT_POLLDEV + help + This driver implements support for buttons connected + to an ADC using a resistor ladder. + + Say Y here if your device has such buttons connected to an ADC. Your + board-specific setup logic must also provide a configuration data + for mapping voltages to buttons. + + To compile this driver as a module, choose M here: the + module will be called adc_keys. + +config KEYBOARD_ADP5520 + tristate "Keypad Support for ADP5520 PMIC" + depends on PMIC_ADP5520 + help + This option enables support for the keypad scan matrix + on Analog Devices ADP5520 PMICs. + + To compile this driver as a module, choose M here: the module will + be called adp5520-keys. + +config KEYBOARD_ADP5588 + tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5588/87 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5588-keys. + +config KEYBOARD_ADP5589 + tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5585/ADP5589 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5589-keys. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + +config KEYBOARD_ATKBD + tristate "AT keyboard" + default y + select SERIO + select SERIO_LIBPS2 + select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO + select SERIO_GSCPS2 if GSC + help + Say Y here if you want to use a standard AT or PS/2 keyboard. Usually + you'll need this, unless you have a different type keyboard (USB, ADB + or other). This also works for AT and PS/2 keyboards connected over a + PS/2 to serial converter. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called atkbd. + +config KEYBOARD_ATKBD_HP_KEYCODES + bool "Use HP keyboard scancodes" + depends on PARISC && KEYBOARD_ATKBD + default y + help + Say Y here if you have a PA-RISC machine and want to use an AT or + PS/2 keyboard, and your keyboard uses keycodes that are specific to + PA-RISC keyboards. + + Say N if you use a standard keyboard. + +config KEYBOARD_ATKBD_RDI_KEYCODES + bool "Use PrecisionBook keyboard scancodes" + depends on KEYBOARD_ATKBD_HP_KEYCODES + default n + help + If you have an RDI PrecisionBook, say Y here if you want to use its + built-in keyboard (as opposed to an external keyboard). + + The PrecisionBook has five keys that conflict with those used by most + AT and PS/2 keyboards. These are as follows: + + PrecisionBook Standard AT or PS/2 + + F1 F12 + Left Ctrl Left Alt + Caps Lock Left Ctrl + Right Ctrl Caps Lock + Left 102nd key (the key to the right of Left Shift) + + If you say N here, and use the PrecisionBook keyboard, then each key + in the left-hand column will be interpreted as the corresponding key + in the right-hand column. + + If you say Y here, and use an external keyboard, then each key in the + right-hand column will be interpreted as the key shown in the + left-hand column. + +config KEYBOARD_QT1070 + tristate "Atmel AT42QT1070 Touch Sensor Chip" + depends on I2C + help + Say Y here if you want to use Atmel AT42QT1070 QTouch + Sensor chip as input device. + + To compile this driver as a module, choose M here: + the module will be called qt1070 + +config KEYBOARD_QT2160 + tristate "Atmel AT42QT2160 Touch Sensor Chip" + depends on I2C + help + If you say yes here you get support for Atmel AT42QT2160 Touch + Sensor chip as a keyboard input. + + This driver can also be built as a module. If so, the module + will be called qt2160. + +config KEYBOARD_CLPS711X + tristate "CLPS711X Keypad support" + depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) + select INPUT_MATRIXKMAP + select INPUT_POLLDEV + help + Say Y here to enable the matrix keypad on the Cirrus Logic + CLPS711X CPUs. + + To compile this driver as a module, choose M here: the + module will be called clps711x-keypad. + +config KEYBOARD_DLINK_DIR685 + tristate "D-Link DIR-685 touchkeys support" + depends on I2C + default ARCH_GEMINI + help + If you say yes here you get support for the D-Link DIR-685 + touchkeys. + + To compile this driver as a module, choose M here: the + module will be called dlink-dir685-touchkeys. + +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO + help + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. + + To compile this driver as a module, choose M here: the + module will be called lkkbd. + +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX + select INPUT_MATRIXKMAP + help + Say Y here to enable the matrix keypad on the Cirrus EP93XX. + + To compile this driver as a module, choose M here: the + module will be called ep93xx_keypad. + +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GPIOLIB || COMPILE_TEST + help + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys. + +config KEYBOARD_GPIO_POLLED + tristate "Polled GPIO buttons" + depends on GPIOLIB + select INPUT_POLLDEV + help + This driver implements support for buttons connected + to GPIO pins that are not capable of generating interrupts. + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys_polled. + +config KEYBOARD_TCA6416 + tristate "TCA6416/TCA6408A Keypad Support" + depends on I2C + help + This driver implements basic keypad functionality + for keys connected through TCA6416/TCA6408A IO expanders. + + Say Y here if your device has keys connected to + TCA6416/TCA6408A IO expander. Your board-specific setup logic + must also provide pin-mask details(of which TCA6416 pins + are used for keypad). + + If enabled the entire TCA6416 device will be managed through + this driver. + + To compile this driver as a module, choose M here: the + module will be called tca6416_keypad. + +config KEYBOARD_TCA8418 + tristate "TCA8418 Keypad Support" + depends on I2C + select INPUT_MATRIXKMAP + help + This driver implements basic keypad functionality + for keys connected through TCA8418 keypad decoder. + + Say Y here if your device has keys connected to + TCA8418 keypad decoder. + + If enabled the complete TCA8418 device will be managed through + this driver. + + To compile this driver as a module, choose M here: the + module will be called tca8418_keypad. + +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GPIOLIB || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Enable support for GPIO driven matrix keypad. + + To compile this driver as a module, choose M here: the + module will be called matrix_keypad. + +config KEYBOARD_HIL_OLD + tristate "HP HIL keyboard support (simple driver)" + depends on GSC || HP300 + default y + help + The "Human Interface Loop" is a older, 8-channel USB-like + controller used in several Hewlett Packard models. This driver + was adapted from the one written for m68k/hp300, and implements + support for a keyboard attached to the HIL port, but not for + any other types of HIL input devices like mice or tablets. + However, it has been thoroughly tested and is stable. + + If you want full HIL support including support for multiple + keyboards, mice, and tablets, you have to enable the + "HP System Device Controller i8042 Support" in the input/serio + submenu. + +config KEYBOARD_HIL + tristate "HP HIL keyboard/pointer support" + depends on GSC || HP300 + default y + select HP_SDC + select HIL_MLC + select SERIO + help + The "Human Interface Loop" is a older, 8-channel USB-like + controller used in several Hewlett Packard models. + This driver implements support for HIL-keyboards and pointing + devices (mice, tablets, touchscreens) attached + to your machine, so normally you should say Y here. + +config KEYBOARD_HP6XX + tristate "HP Jornada 6xx keyboard" + depends on SH_HP6XX + select INPUT_POLLDEV + help + Say Y here if you have a HP Jornada 620/660/680/690 and want to + support the built-in keyboard. + + To compile this driver as a module, choose M here: the + module will be called jornada680_kbd. + +config KEYBOARD_HP7XX + tristate "HP Jornada 7xx keyboard" + depends on SA1100_JORNADA720_SSP && SA1100_SSP + help + Say Y here if you have a HP Jornada 710/720/728 and want to + support the built-in keyboard. + + To compile this driver as a module, choose M here: the + module will be called jornada720_kbd. + +config KEYBOARD_LM8323 + tristate "LM8323 keypad chip" + depends on I2C + depends on LEDS_CLASS + help + If you say yes here you get support for the National Semiconductor + LM8323 keypad controller. + + To compile this driver as a module, choose M here: the + module will be called lm8323. + +config KEYBOARD_LM8333 + tristate "LM8333 keypad chip" + depends on I2C + select INPUT_MATRIXKMAP + help + If you say yes here you get support for the National Semiconductor + LM8333 keypad controller. + + To compile this driver as a module, choose M here: the + module will be called lm8333. + +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO + help + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA + + To compile this driver as a module, choose M here: the + module will be called locomokbd. + +config KEYBOARD_LPC32XX + tristate "LPC32XX matrix key scanner support" + depends on ARCH_LPC32XX && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use NXP LPC32XX SoC key scanner interface, + connected to a key matrix. + + To compile this driver as a module, choose M here: the + module will be called lpc32xx-keys. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_MAX7359 + tristate "Maxim MAX7359 Key Switch Controller" + select INPUT_MATRIXKMAP + depends on I2C + help + If you say yes here you get support for the Maxim MAX7359 Key + Switch Controller chip. This providers microprocessors with + management of up to 64 key switches + + To compile this driver as a module, choose M here: the + module will be called max7359_keypad. + +config KEYBOARD_MCS + tristate "MELFAS MCS Touchkey" + depends on I2C + help + Say Y here if you have the MELFAS MCS5000/5080 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mcs_touchkey. + +config KEYBOARD_MPR121 + tristate "Freescale MPR121 Touchkey" + depends on I2C + help + Say Y here if you have Freescale MPR121 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mpr121_touchkey. + +config KEYBOARD_SNVS_PWRKEY + tristate "IMX SNVS Power Key Driver" + depends on SOC_IMX6SX + depends on OF + help + This is the snvs powerkey driver for the Freescale i.MX application + processors that are newer than i.MX6 SX. + + To compile this driver as a module, choose M here; the + module will be called snvs_pwrkey. + +config KEYBOARD_IMX + tristate "IMX keypad support" + depends on ARCH_MXC + select INPUT_MATRIXKMAP + help + Enable support for IMX keypad port. + + To compile this driver as a module, choose M here: the + module will be called imx_keypad. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. + +config KEYBOARD_NOMADIK + tristate "ST-Ericsson Nomadik SKE keyboard" + depends on (ARCH_NOMADIK || ARCH_U8500) + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a keypad provided on the SKE controller + used on the Ux500 and Nomadik platforms + + To compile this driver as a module, choose M here: the + module will be called nmk-ske-keypad. + +config KEYBOARD_NSPIRE + tristate "TI-NSPIRE built-in keyboard" + depends on ARCH_NSPIRE && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the built-in keypad on TI-NSPIRE. + + To compile this driver as a module, choose M here: the + module will be called nspire-keypad. + +config KEYBOARD_TEGRA + tristate "NVIDIA Tegra internal matrix keyboard controller support" + depends on ARCH_TEGRA && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a matrix keyboard connected directly + to the internal keyboard controller on Tegra SoCs. + + To compile this driver as a module, choose M here: the + module will be called tegra-kbc. + +config KEYBOARD_OPENCORES + tristate "OpenCores Keyboard Controller" + depends on HAS_IOMEM + help + Say Y here if you want to use the OpenCores Keyboard Controller + http://www.opencores.org/project,keyboardcontroller + + To compile this driver as a module, choose M here; the + module will be called opencores-kbd. + +config KEYBOARD_PXA27x + tristate "PXA27x/PXA3xx keypad support" + depends on PXA27x || PXA3xx || ARCH_MMP + select INPUT_MATRIXKMAP + help + Enable support for PXA27x/PXA3xx keypad controller. + + To compile this driver as a module, choose M here: the + module will be called pxa27x_keypad. + +config KEYBOARD_PXA930_ROTARY + tristate "PXA930/PXA935 Enhanced Rotary Controller Support" + depends on CPU_PXA930 || CPU_PXA935 + help + Enable support for PXA930/PXA935 Enhanced Rotary Controller. + + To compile this driver as a module, choose M here: the + module will be called pxa930_rotary. + +config KEYBOARD_PMIC8XXX + tristate "Qualcomm PMIC8XXX keypad support" + depends on MFD_PM8XXX + select INPUT_MATRIXKMAP + help + Say Y here if you want to enable the driver for the PMIC8XXX + keypad provided as a reference design from Qualcomm. This is intended + to support upto 18x8 matrix based keypad design. + + To compile this driver as a module, choose M here: the module will + be called pmic8xxx-keypad. + +config KEYBOARD_SAMSUNG + tristate "Samsung keypad support" + depends on HAVE_CLK + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad on your Samsung mobile + device. + + To compile this driver as a module, choose M here: the + module will be called samsung-keypad. + +config KEYBOARD_GOLDFISH_EVENTS + depends on GOLDFISH || COMPILE_TEST + tristate "Generic Input Event device for Goldfish" + help + Say Y here to get an input event device for the Goldfish virtual + device emulator. + + To compile this driver as a module, choose M here: the + module will be called goldfish-events. + +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO + help + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. + + To compile this driver as a module, choose M here: the + module will be called stowaway. + +config KEYBOARD_ST_KEYSCAN + tristate "STMicroelectronics keyscan support" + depends on ARCH_STI || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a keypad attached to the keyscan block + on some STMicroelectronics SoC devices. + + To compile this driver as a module, choose M here: the + module will be called st-keyscan. + +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO + help + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. + + To compile this driver as a module, choose M here: the + module will be called sunkbd. + +config KEYBOARD_SH_KEYSC + tristate "SuperH KEYSC keypad support" + depends on ARCH_SHMOBILE || COMPILE_TEST + help + Say Y here if you want to use a keypad attached to the KEYSC block + on SuperH processors such as sh7722 and sh7343. + + To compile this driver as a module, choose M here: the + module will be called sh_keysc. + +config KEYBOARD_STMPE + tristate "STMPE keypad support" + depends on MFD_STMPE + depends on OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad controller on STMPE I/O + expanders. + + To compile this driver as a module, choose M here: the module will be + called stmpe-keypad. + +config KEYBOARD_SUN4I_LRADC + tristate "Allwinner sun4i low res adc attached tablet keys support" + depends on ARCH_SUNXI + help + This selects support for the Allwinner low res adc attached tablet + keys found on Allwinner sunxi SoCs. + + To compile this driver as a module, choose M here: the + module will be called sun4i-lradc-keys. + +config KEYBOARD_DAVINCI + tristate "TI DaVinci Key Scan" + depends on ARCH_DAVINCI_DM365 + help + Say Y to enable keypad module support for the TI DaVinci + platforms (DM365). + + To compile this driver as a module, choose M here: the + module will be called davinci_keyscan. + +config KEYBOARD_IPAQ_MICRO + tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)" + depends on MFD_IPAQ_MICRO + help + Say Y to enable support for the buttons attached to + Micro peripheral controller on iPAQ h3100/h3600/h3700 + + To compile this driver as a module, choose M here: the + module will be called ipaq-micro-keys. + +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on ARCH_OMAP1 + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the OMAP keypad. + + To compile this driver as a module, choose M here: the + module will be called omap-keypad. + +config KEYBOARD_OMAP4 + tristate "TI OMAP4+ keypad support" + depends on OF || ARCH_OMAP2PLUS + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the OMAP4+ keypad. + + To compile this driver as a module, choose M here: the + module will be called omap4-keypad. + +config KEYBOARD_SPEAR + tristate "ST SPEAR keyboard support" + depends on PLAT_SPEAR + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the SPEAR keyboard. + + To compile this driver as a module, choose M here: the + module will be called spear-keboard. + +config KEYBOARD_TC3589X + tristate "TC3589X Keypad support" + depends on MFD_TC3589X + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad controller on + TC35892/3 I/O expander. + + To compile this driver as a module, choose M here: the + module will be called tc3589x-keypad. + +config KEYBOARD_TM2_TOUCHKEY + tristate "TM2 touchkey support" + depends on I2C + depends on LEDS_CLASS + help + Say Y here to enable device driver for tm2-touchkey with + LED control for the Exynos5433 TM2 board. + + To compile this driver as a module, choose M here. + module will be called tm2-touchkey. + +config KEYBOARD_TWL4030 + tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" + depends on TWL4030_CORE + select INPUT_MATRIXKMAP + help + Say Y here if your board use the keypad controller on + TWL4030 family chips. It's safe to say enable this + even on boards that don't use the keypad controller. + + To compile this driver as a module, choose M here: the + module will be called twl4030_keypad. + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. + +config KEYBOARD_W90P910 + tristate "W90P910 Matrix Keypad support" + depends on ARCH_W90X900 + select INPUT_MATRIXKMAP + help + Say Y here to enable the matrix keypad on evaluation board + based on W90P910. + + To compile this driver as a module, choose M here: the + module will be called w90p910_keypad. + +config KEYBOARD_CROS_EC + tristate "ChromeOS EC keyboard" + select INPUT_MATRIXKMAP + depends on MFD_CROS_EC + help + Say Y here to enable the matrix keyboard used by ChromeOS devices + and implemented on the ChromeOS EC. You must enable one bus option + (CROS_EC_I2C or CROS_EC_SPI) to use this. + + To compile this driver as a module, choose M here: the + module will be called cros_ec_keyb. + +config KEYBOARD_CAP11XX + tristate "Microchip CAP11XX based touch sensors" + depends on OF && I2C + select REGMAP_I2C + help + Say Y here to enable the CAP11XX touch sensor driver. + + To compile this driver as a module, choose M here: the + module will be called cap11xx. + +config KEYBOARD_BCM + tristate "Broadcom keypad driver" + depends on OF && HAVE_CLK + select INPUT_MATRIXKMAP + default ARCH_BCM_CYGNUS + help + Say Y here if you want to use Broadcom keypad. + + To compile this driver as a module, choose M here: the + module will be called bcm-keypad. + +config KEYBOARD_MTK_PMIC + tristate "MediaTek PMIC keys support" + depends on MFD_MT6397 + help + Say Y here if you want to use the pmic keys (powerkey/homekey). + + To compile this driver as a module, choose M here: the + module will be called pmic-keys. + +endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile new file mode 100644 index 000000000..182e92985 --- /dev/null +++ b/drivers/input/keyboard/Makefile @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the input core drivers. +# + +# Each configuration option enables a list of files. + +obj-$(CONFIG_KEYBOARD_ADC) += adc-keys.o +obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o +obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o +obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o +obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o +obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o +obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o +obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o +obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o +obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o +obj-$(CONFIG_KEYBOARD_DLINK_DIR685) += dlink-dir685-touchkeys.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o +obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o +obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o +obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o +obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o +obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_IPAQ_MICRO) += ipaq-micro-keys.o +obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o +obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o +obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o +obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LM8333) += lm8333.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o +obj-$(CONFIG_KEYBOARD_LPC32XX) += lpc32xx-keys.o +obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o +obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o +obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o +obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o +obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o +obj-$(CONFIG_KEYBOARD_NSPIRE) += nspire-keypad.o +obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o +obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o +obj-$(CONFIG_KEYBOARD_PMIC8XXX) += pmic8xxx-keypad.o +obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o +obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o +obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o +obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o +obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o +obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY) += snvs_pwrkey.o +obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o +obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o +obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o +obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o +obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c new file mode 100644 index 000000000..c255af21e --- /dev/null +++ b/drivers/input/keyboard/adc-keys.c @@ -0,0 +1,208 @@ +/* + * Input driver for resistor ladder connected on ADC + * + * Copyright (c) 2016 Alexandre Belloni + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/iio/consumer.h> +#include <linux/iio/types.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/slab.h> + +struct adc_keys_button { + u32 voltage; + u32 keycode; +}; + +struct adc_keys_state { + struct iio_channel *channel; + u32 num_keys; + u32 last_key; + u32 keyup_voltage; + const struct adc_keys_button *map; +}; + +static void adc_keys_poll(struct input_polled_dev *dev) +{ + struct adc_keys_state *st = dev->private; + int i, value, ret; + u32 diff, closest = 0xffffffff; + int keycode = 0; + + ret = iio_read_channel_processed(st->channel, &value); + if (unlikely(ret < 0)) { + /* Forcibly release key if any was pressed */ + value = st->keyup_voltage; + } else { + for (i = 0; i < st->num_keys; i++) { + diff = abs(st->map[i].voltage - value); + if (diff < closest) { + closest = diff; + keycode = st->map[i].keycode; + } + } + } + + if (abs(st->keyup_voltage - value) < closest) + keycode = 0; + + if (st->last_key && st->last_key != keycode) + input_report_key(dev->input, st->last_key, 0); + + if (keycode) + input_report_key(dev->input, keycode, 1); + + input_sync(dev->input); + st->last_key = keycode; +} + +static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st) +{ + struct adc_keys_button *map; + struct fwnode_handle *child; + int i; + + st->num_keys = device_get_child_node_count(dev); + if (st->num_keys == 0) { + dev_err(dev, "keymap is missing\n"); + return -EINVAL; + } + + map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL); + if (!map) + return -ENOMEM; + + i = 0; + device_for_each_child_node(dev, child) { + if (fwnode_property_read_u32(child, "press-threshold-microvolt", + &map[i].voltage)) { + dev_err(dev, "Key with invalid or missing voltage\n"); + fwnode_handle_put(child); + return -EINVAL; + } + map[i].voltage /= 1000; + + if (fwnode_property_read_u32(child, "linux,code", + &map[i].keycode)) { + dev_err(dev, "Key with invalid or missing linux,code\n"); + fwnode_handle_put(child); + return -EINVAL; + } + + i++; + } + + st->map = map; + return 0; +} + +static int adc_keys_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_keys_state *st; + struct input_polled_dev *poll_dev; + struct input_dev *input; + enum iio_chan_type type; + int i, value; + int error; + + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); + if (!st) + return -ENOMEM; + + st->channel = devm_iio_channel_get(dev, "buttons"); + if (IS_ERR(st->channel)) + return PTR_ERR(st->channel); + + if (!st->channel->indio_dev) + return -ENXIO; + + error = iio_get_channel_type(st->channel, &type); + if (error < 0) + return error; + + if (type != IIO_VOLTAGE) { + dev_err(dev, "Incompatible channel type %d\n", type); + return -EINVAL; + } + + if (device_property_read_u32(dev, "keyup-threshold-microvolt", + &st->keyup_voltage)) { + dev_err(dev, "Invalid or missing keyup voltage\n"); + return -EINVAL; + } + st->keyup_voltage /= 1000; + + error = adc_keys_load_keymap(dev, st); + if (error) + return error; + + poll_dev = devm_input_allocate_polled_device(dev); + if (!poll_dev) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + if (!device_property_read_u32(dev, "poll-interval", &value)) + poll_dev->poll_interval = value; + + poll_dev->poll = adc_keys_poll; + poll_dev->private = st; + + input = poll_dev->input; + + input->name = pdev->name; + input->phys = "adc-keys/input0"; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + __set_bit(EV_KEY, input->evbit); + for (i = 0; i < st->num_keys; i++) + __set_bit(st->map[i].keycode, input->keybit); + + if (device_property_read_bool(dev, "autorepeat")) + __set_bit(EV_REP, input->evbit); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "Unable to register input device: %d\n", error); + return error; + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id adc_keys_of_match[] = { + { .compatible = "adc-keys", }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_keys_of_match); +#endif + +static struct platform_driver __refdata adc_keys_driver = { + .driver = { + .name = "adc_keys", + .of_match_table = of_match_ptr(adc_keys_of_match), + }, + .probe = adc_keys_probe, +}; +module_platform_driver(adc_keys_driver); + +MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); +MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c new file mode 100644 index 000000000..f0b9b37bd --- /dev/null +++ b/drivers/input/keyboard/adp5520-keys.c @@ -0,0 +1,194 @@ +/* + * Keypad driver for Analog Devices ADP5520 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/adp5520.h> +#include <linux/slab.h> +#include <linux/device.h> + +struct adp5520_keys { + struct input_dev *input; + struct notifier_block notifier; + struct device *master; + unsigned short keycode[ADP5520_KEYMAPSIZE]; +}; + +static void adp5520_keys_report_event(struct adp5520_keys *dev, + unsigned short keymask, int value) +{ + int i; + + for (i = 0; i < ADP5520_MAXKEYS; i++) + if (keymask & (1 << i)) + input_report_key(dev->input, dev->keycode[i], value); + + input_sync(dev->input); +} + +static int adp5520_keys_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct adp5520_keys *dev; + uint8_t reg_val_lo, reg_val_hi; + unsigned short keymask; + + dev = container_of(nb, struct adp5520_keys, notifier); + + if (event & ADP5520_KP_INT) { + adp5520_read(dev->master, ADP5520_KP_INT_STAT_1, ®_val_lo); + adp5520_read(dev->master, ADP5520_KP_INT_STAT_2, ®_val_hi); + + keymask = (reg_val_hi << 8) | reg_val_lo; + /* Read twice to clear */ + adp5520_read(dev->master, ADP5520_KP_INT_STAT_1, ®_val_lo); + adp5520_read(dev->master, ADP5520_KP_INT_STAT_2, ®_val_hi); + keymask |= (reg_val_hi << 8) | reg_val_lo; + adp5520_keys_report_event(dev, keymask, 1); + } + + if (event & ADP5520_KR_INT) { + adp5520_read(dev->master, ADP5520_KR_INT_STAT_1, ®_val_lo); + adp5520_read(dev->master, ADP5520_KR_INT_STAT_2, ®_val_hi); + + keymask = (reg_val_hi << 8) | reg_val_lo; + /* Read twice to clear */ + adp5520_read(dev->master, ADP5520_KR_INT_STAT_1, ®_val_lo); + adp5520_read(dev->master, ADP5520_KR_INT_STAT_2, ®_val_hi); + keymask |= (reg_val_hi << 8) | reg_val_lo; + adp5520_keys_report_event(dev, keymask, 0); + } + + return 0; +} + +static int adp5520_keys_probe(struct platform_device *pdev) +{ + struct adp5520_keys_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct input_dev *input; + struct adp5520_keys *dev; + int ret, i; + unsigned char en_mask, ctl_mask = 0; + + if (pdev->id != ID_ADP5520) { + dev_err(&pdev->dev, "only ADP5520 supports Keypad\n"); + return -EINVAL; + } + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data\n"); + return -EINVAL; + } + + if (!(pdata->rows_en_mask && pdata->cols_en_mask)) + return -EINVAL; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) { + dev_err(&pdev->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + input = devm_input_allocate_device(&pdev->dev); + if (!input) + return -ENOMEM; + + dev->master = pdev->dev.parent; + dev->input = input; + + input->name = pdev->name; + input->phys = "adp5520-keys/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x5520; + input->id.version = 0x0001; + + input->keycodesize = sizeof(dev->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = dev->keycode; + + memcpy(dev->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + __set_bit(dev->keycode[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + ret = input_register_device(input); + if (ret) { + dev_err(&pdev->dev, "unable to register input device\n"); + return ret; + } + + en_mask = pdata->rows_en_mask | pdata->cols_en_mask; + + ret = adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_1, en_mask); + + if (en_mask & ADP5520_COL_C3) + ctl_mask |= ADP5520_C3_MODE; + + if (en_mask & ADP5520_ROW_R3) + ctl_mask |= ADP5520_R3_MODE; + + if (ctl_mask) + ret |= adp5520_set_bits(dev->master, ADP5520_LED_CONTROL, + ctl_mask); + + ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP, + pdata->rows_en_mask); + + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + return -EIO; + } + + dev->notifier.notifier_call = adp5520_keys_notifier; + ret = adp5520_register_notifier(dev->master, &dev->notifier, + ADP5520_KP_IEN | ADP5520_KR_IEN); + if (ret) { + dev_err(&pdev->dev, "failed to register notifier\n"); + return ret; + } + + platform_set_drvdata(pdev, dev); + return 0; +} + +static int adp5520_keys_remove(struct platform_device *pdev) +{ + struct adp5520_keys *dev = platform_get_drvdata(pdev); + + adp5520_unregister_notifier(dev->master, &dev->notifier, + ADP5520_KP_IEN | ADP5520_KR_IEN); + + return 0; +} + +static struct platform_driver adp5520_keys_driver = { + .driver = { + .name = "adp5520-keys", + }, + .probe = adp5520_keys_probe, + .remove = adp5520_keys_remove, +}; +module_platform_driver(adp5520_keys_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("Keys ADP5520 Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-keys"); diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c new file mode 100644 index 000000000..f9d273c8b --- /dev/null +++ b/drivers/input/keyboard/adp5588-keys.c @@ -0,0 +1,672 @@ +/* + * File: drivers/input/keyboard/adp5588_keys.c + * Description: keypad driver for ADP5588 and ADP5587 + * I2C QWERTY Keypad and IO Expander + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2008-2010 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/slab.h> + +#include <linux/platform_data/adp5588.h> + +/* Key Event Register xy */ +#define KEY_EV_PRESSED (1 << 7) +#define KEY_EV_MASK (0x7F) + +#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */ + +#define KEYP_MAX_EVENT 10 + +/* + * Early pre 4.0 Silicon required to delay readout by at least 25ms, + * since the Event Counter Register updated 25ms after the interrupt + * asserted. + */ +#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4) + +struct adp5588_kpad { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work work; + unsigned long delay; + unsigned short keycode[ADP5588_KEYMAPSIZE]; + const struct adp5588_gpi_map *gpimap; + unsigned short gpimapsize; +#ifdef CONFIG_GPIOLIB + unsigned char gpiomap[ADP5588_MAXGPIO]; + bool export_gpio; + struct gpio_chip gc; + struct mutex gpio_lock; /* Protect cached dir, dat_out */ + u8 dat_out[3]; + u8 dir[3]; +#endif +}; + +static int adp5588_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +#ifdef CONFIG_GPIOLIB +static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); + int val; + + mutex_lock(&kpad->gpio_lock); + + if (kpad->dir[bank] & bit) + val = kpad->dat_out[bank]; + else + val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank); + + mutex_unlock(&kpad->gpio_lock); + + return !!(val & bit); +} + +static void adp5588_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5588_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); + + mutex_lock(&kpad->gpio_lock); + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, + kpad->dat_out[bank]); + + mutex_unlock(&kpad->gpio_lock); +} + +static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] &= ~bit; + ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int adp5588_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5588_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] |= bit; + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, + kpad->dat_out[bank]); + ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank, + kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int adp5588_build_gpiomap(struct adp5588_kpad *kpad, + const struct adp5588_kpad_platform_data *pdata) +{ + bool pin_used[ADP5588_MAXGPIO]; + int n_unused = 0; + int i; + + memset(pin_used, 0, sizeof(pin_used)); + + for (i = 0; i < pdata->rows; i++) + pin_used[i] = true; + + for (i = 0; i < pdata->cols; i++) + pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true; + + for (i = 0; i < kpad->gpimapsize; i++) + pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true; + + for (i = 0; i < ADP5588_MAXGPIO; i++) + if (!pin_used[i]) + kpad->gpiomap[n_unused++] = i; + + return n_unused; +} + +static int adp5588_gpio_add(struct adp5588_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev); + const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data; + int i, error; + + if (!gpio_data) + return 0; + + kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata); + if (kpad->gc.ngpio == 0) { + dev_info(dev, "No unused gpios left to export\n"); + return 0; + } + + kpad->export_gpio = true; + + kpad->gc.direction_input = adp5588_gpio_direction_input; + kpad->gc.direction_output = adp5588_gpio_direction_output; + kpad->gc.get = adp5588_gpio_get_value; + kpad->gc.set = adp5588_gpio_set_value; + kpad->gc.can_sleep = 1; + + kpad->gc.base = gpio_data->gpio_start; + kpad->gc.label = kpad->client->name; + kpad->gc.owner = THIS_MODULE; + kpad->gc.names = gpio_data->names; + + mutex_init(&kpad->gpio_lock); + + error = gpiochip_add_data(&kpad->gc, kpad); + if (error) { + dev_err(dev, "gpiochip_add failed, err: %d\n", error); + return error; + } + + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { + kpad->dat_out[i] = adp5588_read(kpad->client, + GPIO_DAT_OUT1 + i); + kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i); + } + + if (gpio_data->setup) { + error = gpio_data->setup(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "setup failed, %d\n", error); + } + + return 0; +} + +static void adp5588_gpio_remove(struct adp5588_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev); + const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data; + int error; + + if (!kpad->export_gpio) + return; + + if (gpio_data->teardown) { + error = gpio_data->teardown(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "teardown failed %d\n", error); + } + + gpiochip_remove(&kpad->gc); +} +#else +static inline int adp5588_gpio_add(struct adp5588_kpad *kpad) +{ + return 0; +} + +static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad) +{ +} +#endif + +static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt) +{ + int i, j; + + for (i = 0; i < ev_cnt; i++) { + int key = adp5588_read(kpad->client, Key_EVENTA + i); + int key_val = key & KEY_EV_MASK; + + if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) { + for (j = 0; j < kpad->gpimapsize; j++) { + if (key_val == kpad->gpimap[j].pin) { + input_report_switch(kpad->input, + kpad->gpimap[j].sw_evt, + key & KEY_EV_PRESSED); + break; + } + } + } else { + input_report_key(kpad->input, + kpad->keycode[key_val - 1], + key & KEY_EV_PRESSED); + } + } +} + +static void adp5588_work(struct work_struct *work) +{ + struct adp5588_kpad *kpad = container_of(work, + struct adp5588_kpad, work.work); + struct i2c_client *client = kpad->client; + int status, ev_cnt; + + status = adp5588_read(client, INT_STAT); + + if (status & ADP5588_OVR_FLOW_INT) /* Unlikely and should never happen */ + dev_err(&client->dev, "Event Overflow Error\n"); + + if (status & ADP5588_KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC; + if (ev_cnt) { + adp5588_report_events(kpad, ev_cnt); + input_sync(kpad->input); + } + } + adp5588_write(client, INT_STAT, status); /* Status is W1C */ +} + +static irqreturn_t adp5588_irq(int irq, void *handle) +{ + struct adp5588_kpad *kpad = handle; + + /* + * use keventd context to read the event fifo registers + * Schedule readout at least 25ms after notification for + * REVID < 4 + */ + + schedule_delayed_work(&kpad->work, kpad->delay); + + return IRQ_HANDLED; +} + +static int adp5588_setup(struct i2c_client *client) +{ + const struct adp5588_kpad_platform_data *pdata = + dev_get_platdata(&client->dev); + const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data; + int i, ret; + unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0; + + ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows)); + ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF); + ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8); + + if (pdata->en_keylock) { + ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); + ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN); + } + + for (i = 0; i < KEYP_MAX_EVENT; i++) + ret |= adp5588_read(client, Key_EVENTA); + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin <= GPI_PIN_ROW_END) { + evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE)); + } else { + evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF); + evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8); + } + } + + if (pdata->gpimapsize) { + ret |= adp5588_write(client, GPI_EM1, evt_mode1); + ret |= adp5588_write(client, GPI_EM2, evt_mode2); + ret |= adp5588_write(client, GPI_EM3, evt_mode3); + } + + if (gpio_data) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { + int pull_mask = gpio_data->pullup_dis_mask; + + ret |= adp5588_write(client, GPIO_PULL1 + i, + (pull_mask >> (8 * i)) & 0xFF); + } + } + + ret |= adp5588_write(client, INT_STAT, + ADP5588_CMP2_INT | ADP5588_CMP1_INT | + ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT | + ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */ + + ret |= adp5588_write(client, CFG, ADP5588_INT_CFG | + ADP5588_OVR_FLOW_IEN | + ADP5588_KE_IEN); + + if (ret < 0) { + dev_err(&client->dev, "Write Error\n"); + return ret; + } + + return 0; +} + +static void adp5588_report_switch_state(struct adp5588_kpad *kpad) +{ + int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1); + int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2); + int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3); + int gpi_stat_tmp, pin_loc; + int i; + + for (i = 0; i < kpad->gpimapsize; i++) { + unsigned short pin = kpad->gpimap[i].pin; + + if (pin <= GPI_PIN_ROW_END) { + gpi_stat_tmp = gpi_stat1; + pin_loc = pin - GPI_PIN_ROW_BASE; + } else if ((pin - GPI_PIN_COL_BASE) < 8) { + gpi_stat_tmp = gpi_stat2; + pin_loc = pin - GPI_PIN_COL_BASE; + } else { + gpi_stat_tmp = gpi_stat3; + pin_loc = pin - GPI_PIN_COL_BASE - 8; + } + + if (gpi_stat_tmp < 0) { + dev_err(&kpad->client->dev, + "Can't read GPIO_DAT_STAT switch %d default to OFF\n", + pin); + gpi_stat_tmp = 0; + } + + input_report_switch(kpad->input, + kpad->gpimap[i].sw_evt, + !(gpi_stat_tmp & (1 << pin_loc))); + } + + input_sync(kpad->input); +} + + +static int adp5588_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5588_kpad *kpad; + const struct adp5588_kpad_platform_data *pdata = + dev_get_platdata(&client->dev); + struct input_dev *input; + unsigned int revid; + int ret, i; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (!pdata->rows || !pdata->cols || !pdata->keymap) { + dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); + return -EINVAL; + } + + if (pdata->keymapsize != ADP5588_KEYMAPSIZE) { + dev_err(&client->dev, "invalid keymapsize\n"); + return -EINVAL; + } + + if (!pdata->gpimap && pdata->gpimapsize) { + dev_err(&client->dev, "invalid gpimap from pdata\n"); + return -EINVAL; + } + + if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) { + dev_err(&client->dev, "invalid gpimapsize\n"); + return -EINVAL; + } + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) { + dev_err(&client->dev, "invalid gpi pin data\n"); + return -EINVAL; + } + + if (pin <= GPI_PIN_ROW_END) { + if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) { + dev_err(&client->dev, "invalid gpi row data\n"); + return -EINVAL; + } + } else { + if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) { + dev_err(&client->dev, "invalid gpi col data\n"); + return -EINVAL; + } + } + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + return -EINVAL; + } + + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + input = input_allocate_device(); + if (!kpad || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + kpad->client = client; + kpad->input = input; + INIT_DELAYED_WORK(&kpad->work, adp5588_work); + + ret = adp5588_read(client, DEV_ID); + if (ret < 0) { + error = ret; + goto err_free_mem; + } + + revid = (u8) ret & ADP5588_DEVICE_ID_MASK; + if (WA_DELAYED_READOUT_REVID(revid)) + kpad->delay = msecs_to_jiffies(30); + + input->name = client->name; + input->phys = "adp5588-keys/input0"; + input->dev.parent = &client->dev; + + input_set_drvdata(input, kpad); + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = revid; + + input->keycodesize = sizeof(kpad->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = kpad->keycode; + + memcpy(kpad->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + kpad->gpimap = pdata->gpimap; + kpad->gpimapsize = pdata->gpimapsize; + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + if (kpad->keycode[i] <= KEY_MAX) + __set_bit(kpad->keycode[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + if (kpad->gpimapsize) + __set_bit(EV_SW, input->evbit); + for (i = 0; i < kpad->gpimapsize; i++) + __set_bit(kpad->gpimap[i].sw_evt, input->swbit); + + error = input_register_device(input); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + goto err_free_mem; + } + + error = request_irq(client->irq, adp5588_irq, + IRQF_TRIGGER_FALLING, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "irq %d busy?\n", client->irq); + goto err_unreg_dev; + } + + error = adp5588_setup(client); + if (error) + goto err_free_irq; + + if (kpad->gpimapsize) + adp5588_report_switch_state(kpad); + + error = adp5588_gpio_add(kpad); + if (error) + goto err_free_irq; + + device_init_wakeup(&client->dev, 1); + i2c_set_clientdata(client, kpad); + + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + return 0; + + err_free_irq: + free_irq(client->irq, kpad); + cancel_delayed_work_sync(&kpad->work); + err_unreg_dev: + input_unregister_device(input); + input = NULL; + err_free_mem: + input_free_device(input); + kfree(kpad); + + return error; +} + +static int adp5588_remove(struct i2c_client *client) +{ + struct adp5588_kpad *kpad = i2c_get_clientdata(client); + + adp5588_write(client, CFG, 0); + free_irq(client->irq, kpad); + cancel_delayed_work_sync(&kpad->work); + input_unregister_device(kpad->input); + adp5588_gpio_remove(kpad); + kfree(kpad); + + return 0; +} + +#ifdef CONFIG_PM +static int adp5588_suspend(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + disable_irq(client->irq); + cancel_delayed_work_sync(&kpad->work); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int adp5588_resume(struct device *dev) +{ + struct adp5588_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + return 0; +} + +static const struct dev_pm_ops adp5588_dev_pm_ops = { + .suspend = adp5588_suspend, + .resume = adp5588_resume, +}; +#endif + +static const struct i2c_device_id adp5588_id[] = { + { "adp5588-keys", 0 }, + { "adp5587-keys", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp5588_id); + +static struct i2c_driver adp5588_driver = { + .driver = { + .name = KBUILD_MODNAME, +#ifdef CONFIG_PM + .pm = &adp5588_dev_pm_ops, +#endif + }, + .probe = adp5588_probe, + .remove = adp5588_remove, + .id_table = adp5588_id, +}; + +module_i2c_driver(adp5588_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("ADP5588/87 Keypad driver"); diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c new file mode 100644 index 000000000..2835fba71 --- /dev/null +++ b/drivers/input/keyboard/adp5589-keys.c @@ -0,0 +1,1113 @@ +/* + * Description: keypad driver for ADP5589, ADP5585 + * I2C QWERTY Keypad and IO Expander + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2010-2011 Analog Devices Inc. + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/slab.h> + +#include <linux/input/adp5589.h> + +/* ADP5589/ADP5585 Common Registers */ +#define ADP5589_5_ID 0x00 +#define ADP5589_5_INT_STATUS 0x01 +#define ADP5589_5_STATUS 0x02 +#define ADP5589_5_FIFO_1 0x03 +#define ADP5589_5_FIFO_2 0x04 +#define ADP5589_5_FIFO_3 0x05 +#define ADP5589_5_FIFO_4 0x06 +#define ADP5589_5_FIFO_5 0x07 +#define ADP5589_5_FIFO_6 0x08 +#define ADP5589_5_FIFO_7 0x09 +#define ADP5589_5_FIFO_8 0x0A +#define ADP5589_5_FIFO_9 0x0B +#define ADP5589_5_FIFO_10 0x0C +#define ADP5589_5_FIFO_11 0x0D +#define ADP5589_5_FIFO_12 0x0E +#define ADP5589_5_FIFO_13 0x0F +#define ADP5589_5_FIFO_14 0x10 +#define ADP5589_5_FIFO_15 0x11 +#define ADP5589_5_FIFO_16 0x12 +#define ADP5589_5_GPI_INT_STAT_A 0x13 +#define ADP5589_5_GPI_INT_STAT_B 0x14 + +/* ADP5589 Registers */ +#define ADP5589_GPI_INT_STAT_C 0x15 +#define ADP5589_GPI_STATUS_A 0x16 +#define ADP5589_GPI_STATUS_B 0x17 +#define ADP5589_GPI_STATUS_C 0x18 +#define ADP5589_RPULL_CONFIG_A 0x19 +#define ADP5589_RPULL_CONFIG_B 0x1A +#define ADP5589_RPULL_CONFIG_C 0x1B +#define ADP5589_RPULL_CONFIG_D 0x1C +#define ADP5589_RPULL_CONFIG_E 0x1D +#define ADP5589_GPI_INT_LEVEL_A 0x1E +#define ADP5589_GPI_INT_LEVEL_B 0x1F +#define ADP5589_GPI_INT_LEVEL_C 0x20 +#define ADP5589_GPI_EVENT_EN_A 0x21 +#define ADP5589_GPI_EVENT_EN_B 0x22 +#define ADP5589_GPI_EVENT_EN_C 0x23 +#define ADP5589_GPI_INTERRUPT_EN_A 0x24 +#define ADP5589_GPI_INTERRUPT_EN_B 0x25 +#define ADP5589_GPI_INTERRUPT_EN_C 0x26 +#define ADP5589_DEBOUNCE_DIS_A 0x27 +#define ADP5589_DEBOUNCE_DIS_B 0x28 +#define ADP5589_DEBOUNCE_DIS_C 0x29 +#define ADP5589_GPO_DATA_OUT_A 0x2A +#define ADP5589_GPO_DATA_OUT_B 0x2B +#define ADP5589_GPO_DATA_OUT_C 0x2C +#define ADP5589_GPO_OUT_MODE_A 0x2D +#define ADP5589_GPO_OUT_MODE_B 0x2E +#define ADP5589_GPO_OUT_MODE_C 0x2F +#define ADP5589_GPIO_DIRECTION_A 0x30 +#define ADP5589_GPIO_DIRECTION_B 0x31 +#define ADP5589_GPIO_DIRECTION_C 0x32 +#define ADP5589_UNLOCK1 0x33 +#define ADP5589_UNLOCK2 0x34 +#define ADP5589_EXT_LOCK_EVENT 0x35 +#define ADP5589_UNLOCK_TIMERS 0x36 +#define ADP5589_LOCK_CFG 0x37 +#define ADP5589_RESET1_EVENT_A 0x38 +#define ADP5589_RESET1_EVENT_B 0x39 +#define ADP5589_RESET1_EVENT_C 0x3A +#define ADP5589_RESET2_EVENT_A 0x3B +#define ADP5589_RESET2_EVENT_B 0x3C +#define ADP5589_RESET_CFG 0x3D +#define ADP5589_PWM_OFFT_LOW 0x3E +#define ADP5589_PWM_OFFT_HIGH 0x3F +#define ADP5589_PWM_ONT_LOW 0x40 +#define ADP5589_PWM_ONT_HIGH 0x41 +#define ADP5589_PWM_CFG 0x42 +#define ADP5589_CLOCK_DIV_CFG 0x43 +#define ADP5589_LOGIC_1_CFG 0x44 +#define ADP5589_LOGIC_2_CFG 0x45 +#define ADP5589_LOGIC_FF_CFG 0x46 +#define ADP5589_LOGIC_INT_EVENT_EN 0x47 +#define ADP5589_POLL_PTIME_CFG 0x48 +#define ADP5589_PIN_CONFIG_A 0x49 +#define ADP5589_PIN_CONFIG_B 0x4A +#define ADP5589_PIN_CONFIG_C 0x4B +#define ADP5589_PIN_CONFIG_D 0x4C +#define ADP5589_GENERAL_CFG 0x4D +#define ADP5589_INT_EN 0x4E + +/* ADP5585 Registers */ +#define ADP5585_GPI_STATUS_A 0x15 +#define ADP5585_GPI_STATUS_B 0x16 +#define ADP5585_RPULL_CONFIG_A 0x17 +#define ADP5585_RPULL_CONFIG_B 0x18 +#define ADP5585_RPULL_CONFIG_C 0x19 +#define ADP5585_RPULL_CONFIG_D 0x1A +#define ADP5585_GPI_INT_LEVEL_A 0x1B +#define ADP5585_GPI_INT_LEVEL_B 0x1C +#define ADP5585_GPI_EVENT_EN_A 0x1D +#define ADP5585_GPI_EVENT_EN_B 0x1E +#define ADP5585_GPI_INTERRUPT_EN_A 0x1F +#define ADP5585_GPI_INTERRUPT_EN_B 0x20 +#define ADP5585_DEBOUNCE_DIS_A 0x21 +#define ADP5585_DEBOUNCE_DIS_B 0x22 +#define ADP5585_GPO_DATA_OUT_A 0x23 +#define ADP5585_GPO_DATA_OUT_B 0x24 +#define ADP5585_GPO_OUT_MODE_A 0x25 +#define ADP5585_GPO_OUT_MODE_B 0x26 +#define ADP5585_GPIO_DIRECTION_A 0x27 +#define ADP5585_GPIO_DIRECTION_B 0x28 +#define ADP5585_RESET1_EVENT_A 0x29 +#define ADP5585_RESET1_EVENT_B 0x2A +#define ADP5585_RESET1_EVENT_C 0x2B +#define ADP5585_RESET2_EVENT_A 0x2C +#define ADP5585_RESET2_EVENT_B 0x2D +#define ADP5585_RESET_CFG 0x2E +#define ADP5585_PWM_OFFT_LOW 0x2F +#define ADP5585_PWM_OFFT_HIGH 0x30 +#define ADP5585_PWM_ONT_LOW 0x31 +#define ADP5585_PWM_ONT_HIGH 0x32 +#define ADP5585_PWM_CFG 0x33 +#define ADP5585_LOGIC_CFG 0x34 +#define ADP5585_LOGIC_FF_CFG 0x35 +#define ADP5585_LOGIC_INT_EVENT_EN 0x36 +#define ADP5585_POLL_PTIME_CFG 0x37 +#define ADP5585_PIN_CONFIG_A 0x38 +#define ADP5585_PIN_CONFIG_B 0x39 +#define ADP5585_PIN_CONFIG_D 0x3A +#define ADP5585_GENERAL_CFG 0x3B +#define ADP5585_INT_EN 0x3C + +/* ID Register */ +#define ADP5589_5_DEVICE_ID_MASK 0xF +#define ADP5589_5_MAN_ID_MASK 0xF +#define ADP5589_5_MAN_ID_SHIFT 4 +#define ADP5589_5_MAN_ID 0x02 + +/* GENERAL_CFG Register */ +#define OSC_EN (1 << 7) +#define CORE_CLK(x) (((x) & 0x3) << 5) +#define LCK_TRK_LOGIC (1 << 4) /* ADP5589 only */ +#define LCK_TRK_GPI (1 << 3) /* ADP5589 only */ +#define INT_CFG (1 << 1) +#define RST_CFG (1 << 0) + +/* INT_EN Register */ +#define LOGIC2_IEN (1 << 5) /* ADP5589 only */ +#define LOGIC1_IEN (1 << 4) +#define LOCK_IEN (1 << 3) /* ADP5589 only */ +#define OVRFLOW_IEN (1 << 2) +#define GPI_IEN (1 << 1) +#define EVENT_IEN (1 << 0) + +/* Interrupt Status Register */ +#define LOGIC2_INT (1 << 5) /* ADP5589 only */ +#define LOGIC1_INT (1 << 4) +#define LOCK_INT (1 << 3) /* ADP5589 only */ +#define OVRFLOW_INT (1 << 2) +#define GPI_INT (1 << 1) +#define EVENT_INT (1 << 0) + +/* STATUS Register */ +#define LOGIC2_STAT (1 << 7) /* ADP5589 only */ +#define LOGIC1_STAT (1 << 6) +#define LOCK_STAT (1 << 5) /* ADP5589 only */ +#define KEC 0x1F + +/* PIN_CONFIG_D Register */ +#define C4_EXTEND_CFG (1 << 6) /* RESET2 */ +#define R4_EXTEND_CFG (1 << 5) /* RESET1 */ + +/* LOCK_CFG */ +#define LOCK_EN (1 << 0) + +#define PTIME_MASK 0x3 +#define LTIME_MASK 0x3 /* ADP5589 only */ + +/* Key Event Register xy */ +#define KEY_EV_PRESSED (1 << 7) +#define KEY_EV_MASK (0x7F) + +#define KEYP_MAX_EVENT 16 +#define ADP5589_MAXGPIO 19 +#define ADP5585_MAXGPIO 11 /* 10 on the ADP5585-01, 11 on ADP5585-02 */ + +enum { + ADP5589, + ADP5585_01, + ADP5585_02 +}; + +struct adp_constants { + u8 maxgpio; + u8 keymapsize; + u8 gpi_pin_row_base; + u8 gpi_pin_row_end; + u8 gpi_pin_col_base; + u8 gpi_pin_base; + u8 gpi_pin_end; + u8 gpimapsize_max; + u8 max_row_num; + u8 max_col_num; + u8 row_mask; + u8 col_mask; + u8 col_shift; + u8 c4_extend_cfg; + u8 (*bank) (u8 offset); + u8 (*bit) (u8 offset); + u8 (*reg) (u8 reg); +}; + +struct adp5589_kpad { + struct i2c_client *client; + struct input_dev *input; + const struct adp_constants *var; + unsigned short keycode[ADP5589_KEYMAPSIZE]; + const struct adp5589_gpi_map *gpimap; + unsigned short gpimapsize; + unsigned extend_cfg; + bool is_adp5585; + bool support_row5; +#ifdef CONFIG_GPIOLIB + unsigned char gpiomap[ADP5589_MAXGPIO]; + bool export_gpio; + struct gpio_chip gc; + struct mutex gpio_lock; /* Protect cached dir, dat_out */ + u8 dat_out[3]; + u8 dir[3]; +#endif +}; + +/* + * ADP5589 / ADP5585 derivative / variant handling + */ + + +/* ADP5589 */ + +static unsigned char adp5589_bank(unsigned char offset) +{ + return offset >> 3; +} + +static unsigned char adp5589_bit(unsigned char offset) +{ + return 1u << (offset & 0x7); +} + +static unsigned char adp5589_reg(unsigned char reg) +{ + return reg; +} + +static const struct adp_constants const_adp5589 = { + .maxgpio = ADP5589_MAXGPIO, + .keymapsize = ADP5589_KEYMAPSIZE, + .gpi_pin_row_base = ADP5589_GPI_PIN_ROW_BASE, + .gpi_pin_row_end = ADP5589_GPI_PIN_ROW_END, + .gpi_pin_col_base = ADP5589_GPI_PIN_COL_BASE, + .gpi_pin_base = ADP5589_GPI_PIN_BASE, + .gpi_pin_end = ADP5589_GPI_PIN_END, + .gpimapsize_max = ADP5589_GPIMAPSIZE_MAX, + .c4_extend_cfg = 12, + .max_row_num = ADP5589_MAX_ROW_NUM, + .max_col_num = ADP5589_MAX_COL_NUM, + .row_mask = ADP5589_ROW_MASK, + .col_mask = ADP5589_COL_MASK, + .col_shift = ADP5589_COL_SHIFT, + .bank = adp5589_bank, + .bit = adp5589_bit, + .reg = adp5589_reg, +}; + +/* ADP5585 */ + +static unsigned char adp5585_bank(unsigned char offset) +{ + return offset > ADP5585_MAX_ROW_NUM; +} + +static unsigned char adp5585_bit(unsigned char offset) +{ + return (offset > ADP5585_MAX_ROW_NUM) ? + 1u << (offset - ADP5585_COL_SHIFT) : 1u << offset; +} + +static const unsigned char adp5585_reg_lut[] = { + [ADP5589_GPI_STATUS_A] = ADP5585_GPI_STATUS_A, + [ADP5589_GPI_STATUS_B] = ADP5585_GPI_STATUS_B, + [ADP5589_RPULL_CONFIG_A] = ADP5585_RPULL_CONFIG_A, + [ADP5589_RPULL_CONFIG_B] = ADP5585_RPULL_CONFIG_B, + [ADP5589_RPULL_CONFIG_C] = ADP5585_RPULL_CONFIG_C, + [ADP5589_RPULL_CONFIG_D] = ADP5585_RPULL_CONFIG_D, + [ADP5589_GPI_INT_LEVEL_A] = ADP5585_GPI_INT_LEVEL_A, + [ADP5589_GPI_INT_LEVEL_B] = ADP5585_GPI_INT_LEVEL_B, + [ADP5589_GPI_EVENT_EN_A] = ADP5585_GPI_EVENT_EN_A, + [ADP5589_GPI_EVENT_EN_B] = ADP5585_GPI_EVENT_EN_B, + [ADP5589_GPI_INTERRUPT_EN_A] = ADP5585_GPI_INTERRUPT_EN_A, + [ADP5589_GPI_INTERRUPT_EN_B] = ADP5585_GPI_INTERRUPT_EN_B, + [ADP5589_DEBOUNCE_DIS_A] = ADP5585_DEBOUNCE_DIS_A, + [ADP5589_DEBOUNCE_DIS_B] = ADP5585_DEBOUNCE_DIS_B, + [ADP5589_GPO_DATA_OUT_A] = ADP5585_GPO_DATA_OUT_A, + [ADP5589_GPO_DATA_OUT_B] = ADP5585_GPO_DATA_OUT_B, + [ADP5589_GPO_OUT_MODE_A] = ADP5585_GPO_OUT_MODE_A, + [ADP5589_GPO_OUT_MODE_B] = ADP5585_GPO_OUT_MODE_B, + [ADP5589_GPIO_DIRECTION_A] = ADP5585_GPIO_DIRECTION_A, + [ADP5589_GPIO_DIRECTION_B] = ADP5585_GPIO_DIRECTION_B, + [ADP5589_RESET1_EVENT_A] = ADP5585_RESET1_EVENT_A, + [ADP5589_RESET1_EVENT_B] = ADP5585_RESET1_EVENT_B, + [ADP5589_RESET1_EVENT_C] = ADP5585_RESET1_EVENT_C, + [ADP5589_RESET2_EVENT_A] = ADP5585_RESET2_EVENT_A, + [ADP5589_RESET2_EVENT_B] = ADP5585_RESET2_EVENT_B, + [ADP5589_RESET_CFG] = ADP5585_RESET_CFG, + [ADP5589_PWM_OFFT_LOW] = ADP5585_PWM_OFFT_LOW, + [ADP5589_PWM_OFFT_HIGH] = ADP5585_PWM_OFFT_HIGH, + [ADP5589_PWM_ONT_LOW] = ADP5585_PWM_ONT_LOW, + [ADP5589_PWM_ONT_HIGH] = ADP5585_PWM_ONT_HIGH, + [ADP5589_PWM_CFG] = ADP5585_PWM_CFG, + [ADP5589_LOGIC_1_CFG] = ADP5585_LOGIC_CFG, + [ADP5589_LOGIC_FF_CFG] = ADP5585_LOGIC_FF_CFG, + [ADP5589_LOGIC_INT_EVENT_EN] = ADP5585_LOGIC_INT_EVENT_EN, + [ADP5589_POLL_PTIME_CFG] = ADP5585_POLL_PTIME_CFG, + [ADP5589_PIN_CONFIG_A] = ADP5585_PIN_CONFIG_A, + [ADP5589_PIN_CONFIG_B] = ADP5585_PIN_CONFIG_B, + [ADP5589_PIN_CONFIG_D] = ADP5585_PIN_CONFIG_D, + [ADP5589_GENERAL_CFG] = ADP5585_GENERAL_CFG, + [ADP5589_INT_EN] = ADP5585_INT_EN, +}; + +static unsigned char adp5585_reg(unsigned char reg) +{ + return adp5585_reg_lut[reg]; +} + +static const struct adp_constants const_adp5585 = { + .maxgpio = ADP5585_MAXGPIO, + .keymapsize = ADP5585_KEYMAPSIZE, + .gpi_pin_row_base = ADP5585_GPI_PIN_ROW_BASE, + .gpi_pin_row_end = ADP5585_GPI_PIN_ROW_END, + .gpi_pin_col_base = ADP5585_GPI_PIN_COL_BASE, + .gpi_pin_base = ADP5585_GPI_PIN_BASE, + .gpi_pin_end = ADP5585_GPI_PIN_END, + .gpimapsize_max = ADP5585_GPIMAPSIZE_MAX, + .c4_extend_cfg = 10, + .max_row_num = ADP5585_MAX_ROW_NUM, + .max_col_num = ADP5585_MAX_COL_NUM, + .row_mask = ADP5585_ROW_MASK, + .col_mask = ADP5585_COL_MASK, + .col_shift = ADP5585_COL_SHIFT, + .bank = adp5585_bank, + .bit = adp5585_bit, + .reg = adp5585_reg, +}; + +static int adp5589_read(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "Read Error\n"); + + return ret; +} + +static int adp5589_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +#ifdef CONFIG_GPIOLIB +static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5589_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); + + return !!(adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_A) + bank) & + bit); +} + +static void adp5589_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5589_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); + + mutex_lock(&kpad->gpio_lock); + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) + + bank, kpad->dat_out[bank]); + + mutex_unlock(&kpad->gpio_lock); +} + +static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + struct adp5589_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] &= ~bit; + ret = adp5589_write(kpad->client, + kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank, + kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int adp5589_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5589_kpad *kpad = gpiochip_get_data(chip); + unsigned int bank = kpad->var->bank(kpad->gpiomap[off]); + unsigned int bit = kpad->var->bit(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] |= bit; + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + ret = adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) + + bank, kpad->dat_out[bank]); + ret |= adp5589_write(kpad->client, + kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank, + kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int adp5589_build_gpiomap(struct adp5589_kpad *kpad, + const struct adp5589_kpad_platform_data *pdata) +{ + bool pin_used[ADP5589_MAXGPIO]; + int n_unused = 0; + int i; + + memset(pin_used, false, sizeof(pin_used)); + + for (i = 0; i < kpad->var->maxgpio; i++) + if (pdata->keypad_en_mask & (1 << i)) + pin_used[i] = true; + + for (i = 0; i < kpad->gpimapsize; i++) + pin_used[kpad->gpimap[i].pin - kpad->var->gpi_pin_base] = true; + + if (kpad->extend_cfg & R4_EXTEND_CFG) + pin_used[4] = true; + + if (kpad->extend_cfg & C4_EXTEND_CFG) + pin_used[kpad->var->c4_extend_cfg] = true; + + if (!kpad->support_row5) + pin_used[5] = true; + + for (i = 0; i < kpad->var->maxgpio; i++) + if (!pin_used[i]) + kpad->gpiomap[n_unused++] = i; + + return n_unused; +} + +static int adp5589_gpio_add(struct adp5589_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5589_kpad_platform_data *pdata = dev_get_platdata(dev); + const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data; + int i, error; + + if (!gpio_data) + return 0; + + kpad->gc.ngpio = adp5589_build_gpiomap(kpad, pdata); + if (kpad->gc.ngpio == 0) { + dev_info(dev, "No unused gpios left to export\n"); + return 0; + } + + kpad->export_gpio = true; + + kpad->gc.direction_input = adp5589_gpio_direction_input; + kpad->gc.direction_output = adp5589_gpio_direction_output; + kpad->gc.get = adp5589_gpio_get_value; + kpad->gc.set = adp5589_gpio_set_value; + kpad->gc.can_sleep = 1; + + kpad->gc.base = gpio_data->gpio_start; + kpad->gc.label = kpad->client->name; + kpad->gc.owner = THIS_MODULE; + + mutex_init(&kpad->gpio_lock); + + error = gpiochip_add_data(&kpad->gc, kpad); + if (error) { + dev_err(dev, "gpiochip_add_data() failed, err: %d\n", error); + return error; + } + + for (i = 0; i <= kpad->var->bank(kpad->var->maxgpio); i++) { + kpad->dat_out[i] = adp5589_read(kpad->client, kpad->var->reg( + ADP5589_GPO_DATA_OUT_A) + i); + kpad->dir[i] = adp5589_read(kpad->client, kpad->var->reg( + ADP5589_GPIO_DIRECTION_A) + i); + } + + if (gpio_data->setup) { + error = gpio_data->setup(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "setup failed, %d\n", error); + } + + return 0; +} + +static void adp5589_gpio_remove(struct adp5589_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5589_kpad_platform_data *pdata = dev_get_platdata(dev); + const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data; + int error; + + if (!kpad->export_gpio) + return; + + if (gpio_data->teardown) { + error = gpio_data->teardown(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "teardown failed %d\n", error); + } + + gpiochip_remove(&kpad->gc); +} +#else +static inline int adp5589_gpio_add(struct adp5589_kpad *kpad) +{ + return 0; +} + +static inline void adp5589_gpio_remove(struct adp5589_kpad *kpad) +{ +} +#endif + +static void adp5589_report_switches(struct adp5589_kpad *kpad, + int key, int key_val) +{ + int i; + + for (i = 0; i < kpad->gpimapsize; i++) { + if (key_val == kpad->gpimap[i].pin) { + input_report_switch(kpad->input, + kpad->gpimap[i].sw_evt, + key & KEY_EV_PRESSED); + break; + } + } +} + +static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt) +{ + int i; + + for (i = 0; i < ev_cnt; i++) { + int key = adp5589_read(kpad->client, ADP5589_5_FIFO_1 + i); + int key_val = key & KEY_EV_MASK; + + if (key_val >= kpad->var->gpi_pin_base && + key_val <= kpad->var->gpi_pin_end) { + adp5589_report_switches(kpad, key, key_val); + } else { + input_report_key(kpad->input, + kpad->keycode[key_val - 1], + key & KEY_EV_PRESSED); + } + } +} + +static irqreturn_t adp5589_irq(int irq, void *handle) +{ + struct adp5589_kpad *kpad = handle; + struct i2c_client *client = kpad->client; + int status, ev_cnt; + + status = adp5589_read(client, ADP5589_5_INT_STATUS); + + if (status & OVRFLOW_INT) /* Unlikely and should never happen */ + dev_err(&client->dev, "Event Overflow Error\n"); + + if (status & EVENT_INT) { + ev_cnt = adp5589_read(client, ADP5589_5_STATUS) & KEC; + if (ev_cnt) { + adp5589_report_events(kpad, ev_cnt); + input_sync(kpad->input); + } + } + + adp5589_write(client, ADP5589_5_INT_STATUS, status); /* Status is W1C */ + + return IRQ_HANDLED; +} + +static int adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key) +{ + int i; + + for (i = 0; i < kpad->var->keymapsize; i++) + if (key == kpad->keycode[i]) + return (i + 1) | KEY_EV_PRESSED; + + dev_err(&kpad->client->dev, "RESET/UNLOCK key not in keycode map\n"); + + return -EINVAL; +} + +static int adp5589_setup(struct adp5589_kpad *kpad) +{ + struct i2c_client *client = kpad->client; + const struct adp5589_kpad_platform_data *pdata = + dev_get_platdata(&client->dev); + u8 (*reg) (u8) = kpad->var->reg; + unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0; + unsigned char pull_mask = 0; + int i, ret; + + ret = adp5589_write(client, reg(ADP5589_PIN_CONFIG_A), + pdata->keypad_en_mask & kpad->var->row_mask); + ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_B), + (pdata->keypad_en_mask >> kpad->var->col_shift) & + kpad->var->col_mask); + + if (!kpad->is_adp5585) + ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C, + (pdata->keypad_en_mask >> 16) & 0xFF); + + if (!kpad->is_adp5585 && pdata->en_keylock) { + ret |= adp5589_write(client, ADP5589_UNLOCK1, + pdata->unlock_key1); + ret |= adp5589_write(client, ADP5589_UNLOCK2, + pdata->unlock_key2); + ret |= adp5589_write(client, ADP5589_UNLOCK_TIMERS, + pdata->unlock_timer & LTIME_MASK); + ret |= adp5589_write(client, ADP5589_LOCK_CFG, LOCK_EN); + } + + for (i = 0; i < KEYP_MAX_EVENT; i++) + ret |= adp5589_read(client, ADP5589_5_FIFO_1 + i); + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin <= kpad->var->gpi_pin_row_end) { + evt_mode1 |= (1 << (pin - kpad->var->gpi_pin_row_base)); + } else { + evt_mode2 |= + ((1 << (pin - kpad->var->gpi_pin_col_base)) & 0xFF); + if (!kpad->is_adp5585) + evt_mode3 |= ((1 << (pin - + kpad->var->gpi_pin_col_base)) >> 8); + } + } + + if (pdata->gpimapsize) { + ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_A), + evt_mode1); + ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_B), + evt_mode2); + if (!kpad->is_adp5585) + ret |= adp5589_write(client, + reg(ADP5589_GPI_EVENT_EN_C), + evt_mode3); + } + + if (pdata->pull_dis_mask & pdata->pullup_en_100k & + pdata->pullup_en_300k & pdata->pulldown_en_300k) + dev_warn(&client->dev, "Conflicting pull resistor config\n"); + + for (i = 0; i <= kpad->var->max_row_num; i++) { + unsigned val = 0, bit = (1 << i); + if (pdata->pullup_en_300k & bit) + val = 0; + else if (pdata->pulldown_en_300k & bit) + val = 1; + else if (pdata->pullup_en_100k & bit) + val = 2; + else if (pdata->pull_dis_mask & bit) + val = 3; + + pull_mask |= val << (2 * (i & 0x3)); + + if (i % 4 == 3 || i == kpad->var->max_row_num) { + ret |= adp5589_write(client, reg(ADP5585_RPULL_CONFIG_A) + + (i >> 2), pull_mask); + pull_mask = 0; + } + } + + for (i = 0; i <= kpad->var->max_col_num; i++) { + unsigned val = 0, bit = 1 << (i + kpad->var->col_shift); + if (pdata->pullup_en_300k & bit) + val = 0; + else if (pdata->pulldown_en_300k & bit) + val = 1; + else if (pdata->pullup_en_100k & bit) + val = 2; + else if (pdata->pull_dis_mask & bit) + val = 3; + + pull_mask |= val << (2 * (i & 0x3)); + + if (i % 4 == 3 || i == kpad->var->max_col_num) { + ret |= adp5589_write(client, + reg(ADP5585_RPULL_CONFIG_C) + + (i >> 2), pull_mask); + pull_mask = 0; + } + } + + if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) { + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_A), + adp5589_get_evcode(kpad, + pdata->reset1_key_1)); + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_B), + adp5589_get_evcode(kpad, + pdata->reset1_key_2)); + ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_C), + adp5589_get_evcode(kpad, + pdata->reset1_key_3)); + kpad->extend_cfg |= R4_EXTEND_CFG; + } + + if (pdata->reset2_key_1 && pdata->reset2_key_2) { + ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_A), + adp5589_get_evcode(kpad, + pdata->reset2_key_1)); + ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_B), + adp5589_get_evcode(kpad, + pdata->reset2_key_2)); + kpad->extend_cfg |= C4_EXTEND_CFG; + } + + if (kpad->extend_cfg) { + ret |= adp5589_write(client, reg(ADP5589_RESET_CFG), + pdata->reset_cfg); + ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_D), + kpad->extend_cfg); + } + + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_A), + pdata->debounce_dis_mask & kpad->var->row_mask); + + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_B), + (pdata->debounce_dis_mask >> kpad->var->col_shift) + & kpad->var->col_mask); + + if (!kpad->is_adp5585) + ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_C), + (pdata->debounce_dis_mask >> 16) & 0xFF); + + ret |= adp5589_write(client, reg(ADP5589_POLL_PTIME_CFG), + pdata->scan_cycle_time & PTIME_MASK); + ret |= adp5589_write(client, ADP5589_5_INT_STATUS, + (kpad->is_adp5585 ? 0 : LOGIC2_INT) | + LOGIC1_INT | OVRFLOW_INT | + (kpad->is_adp5585 ? 0 : LOCK_INT) | + GPI_INT | EVENT_INT); /* Status is W1C */ + + ret |= adp5589_write(client, reg(ADP5589_GENERAL_CFG), + INT_CFG | OSC_EN | CORE_CLK(3)); + ret |= adp5589_write(client, reg(ADP5589_INT_EN), + OVRFLOW_IEN | GPI_IEN | EVENT_IEN); + + if (ret < 0) { + dev_err(&client->dev, "Write Error\n"); + return ret; + } + + return 0; +} + +static void adp5589_report_switch_state(struct adp5589_kpad *kpad) +{ + int gpi_stat_tmp, pin_loc; + int i; + int gpi_stat1 = adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_A)); + int gpi_stat2 = adp5589_read(kpad->client, + kpad->var->reg(ADP5589_GPI_STATUS_B)); + int gpi_stat3 = !kpad->is_adp5585 ? + adp5589_read(kpad->client, ADP5589_GPI_STATUS_C) : 0; + + for (i = 0; i < kpad->gpimapsize; i++) { + unsigned short pin = kpad->gpimap[i].pin; + + if (pin <= kpad->var->gpi_pin_row_end) { + gpi_stat_tmp = gpi_stat1; + pin_loc = pin - kpad->var->gpi_pin_row_base; + } else if ((pin - kpad->var->gpi_pin_col_base) < 8) { + gpi_stat_tmp = gpi_stat2; + pin_loc = pin - kpad->var->gpi_pin_col_base; + } else { + gpi_stat_tmp = gpi_stat3; + pin_loc = pin - kpad->var->gpi_pin_col_base - 8; + } + + if (gpi_stat_tmp < 0) { + dev_err(&kpad->client->dev, + "Can't read GPIO_DAT_STAT switch %d, default to OFF\n", + pin); + gpi_stat_tmp = 0; + } + + input_report_switch(kpad->input, + kpad->gpimap[i].sw_evt, + !(gpi_stat_tmp & (1 << pin_loc))); + } + + input_sync(kpad->input); +} + +static int adp5589_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5589_kpad *kpad; + const struct adp5589_kpad_platform_data *pdata = + dev_get_platdata(&client->dev); + struct input_dev *input; + unsigned int revid; + int ret, i; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + kpad = kzalloc(sizeof(*kpad), GFP_KERNEL); + if (!kpad) + return -ENOMEM; + + switch (id->driver_data) { + case ADP5585_02: + kpad->support_row5 = true; + /* fall through */ + case ADP5585_01: + kpad->is_adp5585 = true; + kpad->var = &const_adp5585; + break; + case ADP5589: + kpad->support_row5 = true; + kpad->var = &const_adp5589; + break; + } + + if (!((pdata->keypad_en_mask & kpad->var->row_mask) && + (pdata->keypad_en_mask >> kpad->var->col_shift)) || + !pdata->keymap) { + dev_err(&client->dev, "no rows, cols or keymap from pdata\n"); + error = -EINVAL; + goto err_free_mem; + } + + if (pdata->keymapsize != kpad->var->keymapsize) { + dev_err(&client->dev, "invalid keymapsize\n"); + error = -EINVAL; + goto err_free_mem; + } + + if (!pdata->gpimap && pdata->gpimapsize) { + dev_err(&client->dev, "invalid gpimap from pdata\n"); + error = -EINVAL; + goto err_free_mem; + } + + if (pdata->gpimapsize > kpad->var->gpimapsize_max) { + dev_err(&client->dev, "invalid gpimapsize\n"); + error = -EINVAL; + goto err_free_mem; + } + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin < kpad->var->gpi_pin_base || + pin > kpad->var->gpi_pin_end) { + dev_err(&client->dev, "invalid gpi pin data\n"); + error = -EINVAL; + goto err_free_mem; + } + + if ((1 << (pin - kpad->var->gpi_pin_row_base)) & + pdata->keypad_en_mask) { + dev_err(&client->dev, "invalid gpi row/col data\n"); + error = -EINVAL; + goto err_free_mem; + } + } + + if (!client->irq) { + dev_err(&client->dev, "no IRQ?\n"); + error = -EINVAL; + goto err_free_mem; + } + + input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto err_free_mem; + } + + kpad->client = client; + kpad->input = input; + + ret = adp5589_read(client, ADP5589_5_ID); + if (ret < 0) { + error = ret; + goto err_free_input; + } + + revid = (u8) ret & ADP5589_5_DEVICE_ID_MASK; + + input->name = client->name; + input->phys = "adp5589-keys/input0"; + input->dev.parent = &client->dev; + + input_set_drvdata(input, kpad); + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = revid; + + input->keycodesize = sizeof(kpad->keycode[0]); + input->keycodemax = pdata->keymapsize; + input->keycode = kpad->keycode; + + memcpy(kpad->keycode, pdata->keymap, + pdata->keymapsize * input->keycodesize); + + kpad->gpimap = pdata->gpimap; + kpad->gpimapsize = pdata->gpimapsize; + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + if (pdata->repeat) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < input->keycodemax; i++) + if (kpad->keycode[i] <= KEY_MAX) + __set_bit(kpad->keycode[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + if (kpad->gpimapsize) + __set_bit(EV_SW, input->evbit); + for (i = 0; i < kpad->gpimapsize; i++) + __set_bit(kpad->gpimap[i].sw_evt, input->swbit); + + error = input_register_device(input); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + goto err_free_input; + } + + error = request_threaded_irq(client->irq, NULL, adp5589_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "irq %d busy?\n", client->irq); + goto err_unreg_dev; + } + + error = adp5589_setup(kpad); + if (error) + goto err_free_irq; + + if (kpad->gpimapsize) + adp5589_report_switch_state(kpad); + + error = adp5589_gpio_add(kpad); + if (error) + goto err_free_irq; + + device_init_wakeup(&client->dev, 1); + i2c_set_clientdata(client, kpad); + + dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + return 0; + +err_free_irq: + free_irq(client->irq, kpad); +err_unreg_dev: + input_unregister_device(input); + input = NULL; +err_free_input: + input_free_device(input); +err_free_mem: + kfree(kpad); + + return error; +} + +static int adp5589_remove(struct i2c_client *client) +{ + struct adp5589_kpad *kpad = i2c_get_clientdata(client); + + adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0); + free_irq(client->irq, kpad); + input_unregister_device(kpad->input); + adp5589_gpio_remove(kpad); + kfree(kpad); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int adp5589_suspend(struct device *dev) +{ + struct adp5589_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + disable_irq(client->irq); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int adp5589_resume(struct device *dev) +{ + struct adp5589_kpad *kpad = dev_get_drvdata(dev); + struct i2c_client *client = kpad->client; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + enable_irq(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume); + +static const struct i2c_device_id adp5589_id[] = { + {"adp5589-keys", ADP5589}, + {"adp5585-keys", ADP5585_01}, + {"adp5585-02-keys", ADP5585_02}, /* Adds ROW5 to ADP5585 */ + {} +}; + +MODULE_DEVICE_TABLE(i2c, adp5589_id); + +static struct i2c_driver adp5589_driver = { + .driver = { + .name = KBUILD_MODNAME, + .pm = &adp5589_dev_pm_ops, + }, + .probe = adp5589_probe, + .remove = adp5589_remove, + .id_table = adp5589_id, +}; + +module_i2c_driver(adp5589_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("ADP5589/ADP5585 Keypad driver"); diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c new file mode 100644 index 000000000..420e33c49 --- /dev/null +++ b/drivers/input/keyboard/amikbd.c @@ -0,0 +1,272 @@ +/* + * Copyright (c) 2000-2001 Vojtech Pavlik + * + * Based on the work of: + * Hamish Macdonald + */ + +/* + * Amiga keyboard driver for Linux/m68k + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/keyboard.h> +#include <linux/platform_device.h> + +#include <asm/amigaints.h> +#include <asm/amigahw.h> +#include <asm/irq.h> + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION("Amiga keyboard driver"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_HW_CONSOLE +static unsigned char amikbd_keycode[0x78] __initdata = { + [0] = KEY_GRAVE, + [1] = KEY_1, + [2] = KEY_2, + [3] = KEY_3, + [4] = KEY_4, + [5] = KEY_5, + [6] = KEY_6, + [7] = KEY_7, + [8] = KEY_8, + [9] = KEY_9, + [10] = KEY_0, + [11] = KEY_MINUS, + [12] = KEY_EQUAL, + [13] = KEY_BACKSLASH, + [15] = KEY_KP0, + [16] = KEY_Q, + [17] = KEY_W, + [18] = KEY_E, + [19] = KEY_R, + [20] = KEY_T, + [21] = KEY_Y, + [22] = KEY_U, + [23] = KEY_I, + [24] = KEY_O, + [25] = KEY_P, + [26] = KEY_LEFTBRACE, + [27] = KEY_RIGHTBRACE, + [29] = KEY_KP1, + [30] = KEY_KP2, + [31] = KEY_KP3, + [32] = KEY_A, + [33] = KEY_S, + [34] = KEY_D, + [35] = KEY_F, + [36] = KEY_G, + [37] = KEY_H, + [38] = KEY_J, + [39] = KEY_K, + [40] = KEY_L, + [41] = KEY_SEMICOLON, + [42] = KEY_APOSTROPHE, + [43] = KEY_BACKSLASH, + [45] = KEY_KP4, + [46] = KEY_KP5, + [47] = KEY_KP6, + [48] = KEY_102ND, + [49] = KEY_Z, + [50] = KEY_X, + [51] = KEY_C, + [52] = KEY_V, + [53] = KEY_B, + [54] = KEY_N, + [55] = KEY_M, + [56] = KEY_COMMA, + [57] = KEY_DOT, + [58] = KEY_SLASH, + [60] = KEY_KPDOT, + [61] = KEY_KP7, + [62] = KEY_KP8, + [63] = KEY_KP9, + [64] = KEY_SPACE, + [65] = KEY_BACKSPACE, + [66] = KEY_TAB, + [67] = KEY_KPENTER, + [68] = KEY_ENTER, + [69] = KEY_ESC, + [70] = KEY_DELETE, + [74] = KEY_KPMINUS, + [76] = KEY_UP, + [77] = KEY_DOWN, + [78] = KEY_RIGHT, + [79] = KEY_LEFT, + [80] = KEY_F1, + [81] = KEY_F2, + [82] = KEY_F3, + [83] = KEY_F4, + [84] = KEY_F5, + [85] = KEY_F6, + [86] = KEY_F7, + [87] = KEY_F8, + [88] = KEY_F9, + [89] = KEY_F10, + [90] = KEY_KPLEFTPAREN, + [91] = KEY_KPRIGHTPAREN, + [92] = KEY_KPSLASH, + [93] = KEY_KPASTERISK, + [94] = KEY_KPPLUS, + [95] = KEY_HELP, + [96] = KEY_LEFTSHIFT, + [97] = KEY_RIGHTSHIFT, + [98] = KEY_CAPSLOCK, + [99] = KEY_LEFTCTRL, + [100] = KEY_LEFTALT, + [101] = KEY_RIGHTALT, + [102] = KEY_LEFTMETA, + [103] = KEY_RIGHTMETA +}; + +static void __init amikbd_init_console_keymaps(void) +{ + /* We can spare 512 bytes on stack for temp_map in init path. */ + unsigned short temp_map[NR_KEYS]; + int i, j; + + for (i = 0; i < MAX_NR_KEYMAPS; i++) { + if (!key_maps[i]) + continue; + memset(temp_map, 0, sizeof(temp_map)); + for (j = 0; j < 0x78; j++) { + if (!amikbd_keycode[j]) + continue; + temp_map[j] = key_maps[i][amikbd_keycode[j]]; + } + for (j = 0; j < NR_KEYS; j++) { + if (!temp_map[j]) + temp_map[j] = 0xf200; + } + memcpy(key_maps[i], temp_map, sizeof(temp_map)); + } +} +#else /* !CONFIG_HW_CONSOLE */ +static inline void amikbd_init_console_keymaps(void) {} +#endif /* !CONFIG_HW_CONSOLE */ + +static const char *amikbd_messages[8] = { + [0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n", + [1] = KERN_WARNING "amikbd: keyboard lost sync\n", + [2] = KERN_WARNING "amikbd: keyboard buffer overflow\n", + [3] = KERN_WARNING "amikbd: keyboard controller failure\n", + [4] = KERN_ERR "amikbd: keyboard selftest failure\n", + [5] = KERN_INFO "amikbd: initiate power-up key stream\n", + [6] = KERN_INFO "amikbd: terminate power-up key stream\n", + [7] = KERN_WARNING "amikbd: keyboard interrupt\n" +}; + +static irqreturn_t amikbd_interrupt(int irq, void *data) +{ + struct input_dev *dev = data; + unsigned char scancode, down; + + scancode = ~ciaa.sdr; /* get and invert scancode (keyboard is active low) */ + ciaa.cra |= 0x40; /* switch SP pin to output for handshake */ + udelay(85); /* wait until 85 us have expired */ + ciaa.cra &= ~0x40; /* switch CIA serial port to input mode */ + + down = !(scancode & 1); /* lowest bit is release bit */ + scancode >>= 1; + + if (scancode < 0x78) { /* scancodes < 0x78 are keys */ + if (scancode == 98) { /* CapsLock is a toggle switch key on Amiga */ + input_report_key(dev, scancode, 1); + input_report_key(dev, scancode, 0); + } else { + input_report_key(dev, scancode, down); + } + + input_sync(dev); + } else /* scancodes >= 0x78 are error codes */ + printk(amikbd_messages[scancode - 0x78]); + + return IRQ_HANDLED; +} + +static int __init amikbd_probe(struct platform_device *pdev) +{ + struct input_dev *dev; + int i, err; + + dev = input_allocate_device(); + if (!dev) { + dev_err(&pdev->dev, "Not enough memory for input device\n"); + return -ENOMEM; + } + + dev->name = pdev->name; + dev->phys = "amikbd/input0"; + dev->id.bustype = BUS_AMIGA; + dev->id.vendor = 0x0001; + dev->id.product = 0x0001; + dev->id.version = 0x0100; + dev->dev.parent = &pdev->dev; + + dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + + for (i = 0; i < 0x78; i++) + set_bit(i, dev->keybit); + + amikbd_init_console_keymaps(); + + ciaa.cra &= ~0x41; /* serial data in, turn off TA */ + err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", + dev); + if (err) + goto fail2; + + err = input_register_device(dev); + if (err) + goto fail3; + + platform_set_drvdata(pdev, dev); + + return 0; + + fail3: free_irq(IRQ_AMIGA_CIAA_SP, dev); + fail2: input_free_device(dev); + return err; +} + +static int __exit amikbd_remove(struct platform_device *pdev) +{ + struct input_dev *dev = platform_get_drvdata(pdev); + + free_irq(IRQ_AMIGA_CIAA_SP, dev); + input_unregister_device(dev); + return 0; +} + +static struct platform_driver amikbd_driver = { + .remove = __exit_p(amikbd_remove), + .driver = { + .name = "amiga-keyboard", + }, +}; + +module_platform_driver_probe(amikbd_driver, amikbd_probe); + +MODULE_ALIAS("platform:amiga-keyboard"); diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c new file mode 100644 index 000000000..6caee807c --- /dev/null +++ b/drivers/input/keyboard/atakbd.c @@ -0,0 +1,247 @@ +/* + * atakbd.c + * + * Copyright (c) 2005 Michael Schmitz + * + * Based on amikbd.c, which is + * + * Copyright (c) 2000-2001 Vojtech Pavlik + * + * Based on the work of: + * Hamish Macdonald + */ + +/* + * Atari keyboard driver for Linux/m68k + * + * The low level init and interrupt stuff is handled in arch/mm68k/atari/atakeyb.c + * (the keyboard ACIA also handles the mouse and joystick data, and the keyboard + * interrupt is shared with the MIDI ACIA so MIDI data also get handled there). + * This driver only deals with handing key events off to the input layer. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/atariints.h> +#include <asm/atarihw.h> +#include <asm/atarikb.h> +#include <asm/irq.h> + +MODULE_AUTHOR("Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>"); +MODULE_DESCRIPTION("Atari keyboard driver"); +MODULE_LICENSE("GPL"); + +/* + 0x47: KP_7 71 + 0x48: KP_8 72 + 0x49: KP_9 73 + 0x62: KP_/ 98 + 0x4b: KP_4 75 + 0x4c: KP_5 76 + 0x4d: KP_6 77 + 0x37: KP_* 55 + 0x4f: KP_1 79 + 0x50: KP_2 80 + 0x51: KP_3 81 + 0x4a: KP_- 74 + 0x52: KP_0 82 + 0x53: KP_. 83 + 0x4e: KP_+ 78 + + 0x67: Up 103 + 0x6c: Down 108 + 0x69: Left 105 + 0x6a: Right 106 + */ + + +static unsigned char atakbd_keycode[0x73] = { /* American layout */ + [1] = KEY_ESC, + [2] = KEY_1, + [3] = KEY_2, + [4] = KEY_3, + [5] = KEY_4, + [6] = KEY_5, + [7] = KEY_6, + [8] = KEY_7, + [9] = KEY_8, + [10] = KEY_9, + [11] = KEY_0, + [12] = KEY_MINUS, + [13] = KEY_EQUAL, + [14] = KEY_BACKSPACE, + [15] = KEY_TAB, + [16] = KEY_Q, + [17] = KEY_W, + [18] = KEY_E, + [19] = KEY_R, + [20] = KEY_T, + [21] = KEY_Y, + [22] = KEY_U, + [23] = KEY_I, + [24] = KEY_O, + [25] = KEY_P, + [26] = KEY_LEFTBRACE, + [27] = KEY_RIGHTBRACE, + [28] = KEY_ENTER, + [29] = KEY_LEFTCTRL, + [30] = KEY_A, + [31] = KEY_S, + [32] = KEY_D, + [33] = KEY_F, + [34] = KEY_G, + [35] = KEY_H, + [36] = KEY_J, + [37] = KEY_K, + [38] = KEY_L, + [39] = KEY_SEMICOLON, + [40] = KEY_APOSTROPHE, + [41] = KEY_GRAVE, + [42] = KEY_LEFTSHIFT, + [43] = KEY_BACKSLASH, + [44] = KEY_Z, + [45] = KEY_X, + [46] = KEY_C, + [47] = KEY_V, + [48] = KEY_B, + [49] = KEY_N, + [50] = KEY_M, + [51] = KEY_COMMA, + [52] = KEY_DOT, + [53] = KEY_SLASH, + [54] = KEY_RIGHTSHIFT, + [55] = KEY_KPASTERISK, + [56] = KEY_LEFTALT, + [57] = KEY_SPACE, + [58] = KEY_CAPSLOCK, + [59] = KEY_F1, + [60] = KEY_F2, + [61] = KEY_F3, + [62] = KEY_F4, + [63] = KEY_F5, + [64] = KEY_F6, + [65] = KEY_F7, + [66] = KEY_F8, + [67] = KEY_F9, + [68] = KEY_F10, + [71] = KEY_HOME, + [72] = KEY_UP, + [74] = KEY_KPMINUS, + [75] = KEY_LEFT, + [77] = KEY_RIGHT, + [78] = KEY_KPPLUS, + [80] = KEY_DOWN, + [82] = KEY_INSERT, + [83] = KEY_DELETE, + [96] = KEY_102ND, + [97] = KEY_UNDO, + [98] = KEY_HELP, + [99] = KEY_KPLEFTPAREN, + [100] = KEY_KPRIGHTPAREN, + [101] = KEY_KPSLASH, + [102] = KEY_KPASTERISK, + [103] = KEY_KP7, + [104] = KEY_KP8, + [105] = KEY_KP9, + [106] = KEY_KP4, + [107] = KEY_KP5, + [108] = KEY_KP6, + [109] = KEY_KP1, + [110] = KEY_KP2, + [111] = KEY_KP3, + [112] = KEY_KP0, + [113] = KEY_KPDOT, + [114] = KEY_KPENTER, +}; + +static struct input_dev *atakbd_dev; + +static void atakbd_interrupt(unsigned char scancode, char down) +{ + + if (scancode < 0x73) { /* scancodes < 0xf3 are keys */ + + // report raw events here? + + scancode = atakbd_keycode[scancode]; + + input_report_key(atakbd_dev, scancode, down); + input_sync(atakbd_dev); + } else /* scancodes >= 0xf3 are mouse data, most likely */ + printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode); + + return; +} + +static int __init atakbd_init(void) +{ + int i, error; + + if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP)) + return -ENODEV; + + // need to init core driver if not already done so + error = atari_keyb_init(); + if (error) + return error; + + atakbd_dev = input_allocate_device(); + if (!atakbd_dev) + return -ENOMEM; + + atakbd_dev->name = "Atari Keyboard"; + atakbd_dev->phys = "atakbd/input0"; + atakbd_dev->id.bustype = BUS_HOST; + atakbd_dev->id.vendor = 0x0001; + atakbd_dev->id.product = 0x0001; + atakbd_dev->id.version = 0x0100; + + atakbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + atakbd_dev->keycode = atakbd_keycode; + atakbd_dev->keycodesize = sizeof(unsigned char); + atakbd_dev->keycodemax = ARRAY_SIZE(atakbd_keycode); + + for (i = 1; i < 0x72; i++) { + set_bit(atakbd_keycode[i], atakbd_dev->keybit); + } + + /* error check */ + error = input_register_device(atakbd_dev); + if (error) { + input_free_device(atakbd_dev); + return error; + } + + atari_input_keyboard_interrupt_hook = atakbd_interrupt; + + return 0; +} + +static void __exit atakbd_exit(void) +{ + atari_input_keyboard_interrupt_hook = NULL; + input_unregister_device(atakbd_dev); +} + +module_init(atakbd_init); +module_exit(atakbd_exit); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c new file mode 100644 index 000000000..7e75835e2 --- /dev/null +++ b/drivers/input/keyboard/atkbd.c @@ -0,0 +1,1821 @@ +/* + * AT and PS/2 keyboard driver + * + * Copyright (c) 1999-2002 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * This driver can handle standard AT keyboards and PS/2 keyboards in + * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb + * input-only controllers and AT keyboards connected over a one way RS232 + * converter. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/workqueue.h> +#include <linux/libps2.h> +#include <linux/mutex.h> +#include <linux/dmi.h> + +#define DRIVER_DESC "AT and PS/2 keyboard driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +static int atkbd_set = 2; +module_param_named(set, atkbd_set, int, 0); +MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)"); + +#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__) +static bool atkbd_reset; +#else +static bool atkbd_reset = true; +#endif +module_param_named(reset, atkbd_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); + +static bool atkbd_softrepeat; +module_param_named(softrepeat, atkbd_softrepeat, bool, 0); +MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); + +static bool atkbd_softraw = true; +module_param_named(softraw, atkbd_softraw, bool, 0); +MODULE_PARM_DESC(softraw, "Use software generated rawmode"); + +static bool atkbd_scroll; +module_param_named(scroll, atkbd_scroll, bool, 0); +MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); + +static bool atkbd_extra; +module_param_named(extra, atkbd_extra, bool, 0); +MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); + +static bool atkbd_terminal; +module_param_named(terminal, atkbd_terminal, bool, 0); +MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); + +/* + * Scancode to keycode tables. These are just the default setting, and + * are loadable via a userland utility. + */ + +#define ATKBD_KEYMAP_SIZE 512 + +static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = { + +#ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES + +/* XXX: need a more general approach */ + +#include "hpps2atkbd.h" /* include the keyboard scancodes */ + +#else + 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117, + 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0, + 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183, + 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185, + 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0, + 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85, + 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0, + 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, + + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, + 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, + 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, + 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, + 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, + 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, + + 0, 0, 0, 65, 99, +#endif +}; + +static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = { + + 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60, + 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62, + 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64, + 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66, + 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68, + 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70, + 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104, + 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183, + + 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0, + 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168, + 148,149,147,140 +}; + +static const unsigned short atkbd_unxlate_table[128] = { + 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, + 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, + 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, + 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, + 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, + 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, + 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, + 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 +}; + +#define ATKBD_CMD_SETLEDS 0x10ed +#define ATKBD_CMD_GSCANSET 0x11f0 +#define ATKBD_CMD_SSCANSET 0x10f0 +#define ATKBD_CMD_GETID 0x02f2 +#define ATKBD_CMD_SETREP 0x10f3 +#define ATKBD_CMD_ENABLE 0x00f4 +#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ +#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ +#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ +#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ +#define ATKBD_CMD_RESET_BAT 0x02ff +#define ATKBD_CMD_RESEND 0x00fe +#define ATKBD_CMD_EX_ENABLE 0x10ea +#define ATKBD_CMD_EX_SETLEDS 0x20eb +#define ATKBD_CMD_OK_GETID 0x02e8 + +#define ATKBD_RET_ACK 0xfa +#define ATKBD_RET_NAK 0xfe +#define ATKBD_RET_BAT 0xaa +#define ATKBD_RET_EMUL0 0xe0 +#define ATKBD_RET_EMUL1 0xe1 +#define ATKBD_RET_RELEASE 0xf0 +#define ATKBD_RET_HANJA 0xf1 +#define ATKBD_RET_HANGEUL 0xf2 +#define ATKBD_RET_ERR 0xff + +#define ATKBD_KEY_UNKNOWN 0 +#define ATKBD_KEY_NULL 255 + +#define ATKBD_SCR_1 0xfffe +#define ATKBD_SCR_2 0xfffd +#define ATKBD_SCR_4 0xfffc +#define ATKBD_SCR_8 0xfffb +#define ATKBD_SCR_CLICK 0xfffa +#define ATKBD_SCR_LEFT 0xfff9 +#define ATKBD_SCR_RIGHT 0xfff8 + +#define ATKBD_SPECIAL ATKBD_SCR_RIGHT + +#define ATKBD_LED_EVENT_BIT 0 +#define ATKBD_REP_EVENT_BIT 1 + +#define ATKBD_XL_ERR 0x01 +#define ATKBD_XL_BAT 0x02 +#define ATKBD_XL_ACK 0x04 +#define ATKBD_XL_NAK 0x08 +#define ATKBD_XL_HANGEUL 0x10 +#define ATKBD_XL_HANJA 0x20 + +static const struct { + unsigned short keycode; + unsigned char set2; +} atkbd_scroll_keys[] = { + { ATKBD_SCR_1, 0xc5 }, + { ATKBD_SCR_2, 0x9d }, + { ATKBD_SCR_4, 0xa4 }, + { ATKBD_SCR_8, 0x9b }, + { ATKBD_SCR_CLICK, 0xe0 }, + { ATKBD_SCR_LEFT, 0xcb }, + { ATKBD_SCR_RIGHT, 0xd2 }, +}; + +/* + * The atkbd control structure + */ + +struct atkbd { + + struct ps2dev ps2dev; + struct input_dev *dev; + + /* Written only during init */ + char name[64]; + char phys[32]; + + unsigned short id; + unsigned short keycode[ATKBD_KEYMAP_SIZE]; + DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE); + unsigned char set; + bool translated; + bool extra; + bool write; + bool softrepeat; + bool softraw; + bool scroll; + bool enabled; + + /* Accessed only from interrupt */ + unsigned char emul; + bool resend; + bool release; + unsigned long xl_bit; + unsigned int last; + unsigned long time; + unsigned long err_count; + + struct delayed_work event_work; + unsigned long event_jiffies; + unsigned long event_mask; + + /* Serializes reconnect(), attr->set() and event work */ + struct mutex mutex; +}; + +/* + * System-specific keymap fixup routine + */ +static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); +static void *atkbd_platform_fixup_data; +static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); + +/* + * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding + * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. + */ +static bool atkbd_skip_deactivate; + +static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, + ssize_t (*handler)(struct atkbd *, char *)); +static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, + ssize_t (*handler)(struct atkbd *, const char *, size_t)); +#define ATKBD_DEFINE_ATTR(_name) \ +static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ +static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \ +static ssize_t atkbd_do_show_##_name(struct device *d, \ + struct device_attribute *attr, char *b) \ +{ \ + return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ +} \ +static ssize_t atkbd_do_set_##_name(struct device *d, \ + struct device_attribute *attr, const char *b, size_t s) \ +{ \ + return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \ +} \ +static struct device_attribute atkbd_attr_##_name = \ + __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name); + +ATKBD_DEFINE_ATTR(extra); +ATKBD_DEFINE_ATTR(force_release); +ATKBD_DEFINE_ATTR(scroll); +ATKBD_DEFINE_ATTR(set); +ATKBD_DEFINE_ATTR(softrepeat); +ATKBD_DEFINE_ATTR(softraw); + +#define ATKBD_DEFINE_RO_ATTR(_name) \ +static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ +static ssize_t atkbd_do_show_##_name(struct device *d, \ + struct device_attribute *attr, char *b) \ +{ \ + return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ +} \ +static struct device_attribute atkbd_attr_##_name = \ + __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL); + +ATKBD_DEFINE_RO_ATTR(err_count); + +static struct attribute *atkbd_attributes[] = { + &atkbd_attr_extra.attr, + &atkbd_attr_force_release.attr, + &atkbd_attr_scroll.attr, + &atkbd_attr_set.attr, + &atkbd_attr_softrepeat.attr, + &atkbd_attr_softraw.attr, + &atkbd_attr_err_count.attr, + NULL +}; + +static struct attribute_group atkbd_attribute_group = { + .attrs = atkbd_attributes, +}; + +static const unsigned int xl_table[] = { + ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK, + ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL, +}; + +/* + * Checks if we should mangle the scancode to extract 'release' bit + * in translated mode. + */ +static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code) +{ + int i; + + if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1) + return false; + + for (i = 0; i < ARRAY_SIZE(xl_table); i++) + if (code == xl_table[i]) + return test_bit(i, &xl_bit); + + return true; +} + +/* + * Calculates new value of xl_bit so the driver can distinguish + * between make/break pair of scancodes for select keys and PS/2 + * protocol responses. + */ +static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(xl_table); i++) { + if (!((code ^ xl_table[i]) & 0x7f)) { + if (code & 0x80) + __clear_bit(i, &atkbd->xl_bit); + else + __set_bit(i, &atkbd->xl_bit); + break; + } + } +} + +/* + * Encode the scancode, 0xe0 prefix, and high bit into a single integer, + * keeping kernel 2.4 compatibility for set 2 + */ +static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code) +{ + if (atkbd->set == 3) { + if (atkbd->emul == 1) + code |= 0x100; + } else { + code = (code & 0x7f) | ((code & 0x80) << 1); + if (atkbd->emul == 1) + code |= 0x80; + } + + return code; +} + +/* + * atkbd_interrupt(). Here takes place processing of data received from + * the keyboard into events. + */ + +static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct atkbd *atkbd = serio_get_drvdata(serio); + struct input_dev *dev = atkbd->dev; + unsigned int code = data; + int scroll = 0, hscroll = 0, click = -1; + int value; + unsigned short keycode; + + dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags); + +#if !defined(__i386__) && !defined (__x86_64__) + if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) { + dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags); + serio_write(serio, ATKBD_CMD_RESEND); + atkbd->resend = true; + goto out; + } + + if (!flags && data == ATKBD_RET_ACK) + atkbd->resend = false; +#endif + + if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK)) + if (ps2_handle_ack(&atkbd->ps2dev, data)) + goto out; + + if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD)) + if (ps2_handle_response(&atkbd->ps2dev, data)) + goto out; + + if (!atkbd->enabled) + goto out; + + input_event(dev, EV_MSC, MSC_RAW, code); + + if (atkbd_platform_scancode_fixup) + code = atkbd_platform_scancode_fixup(atkbd, code); + + if (atkbd->translated) { + + if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { + atkbd->release = code >> 7; + code &= 0x7f; + } + + if (!atkbd->emul) + atkbd_calculate_xl_bit(atkbd, data); + } + + switch (code) { + case ATKBD_RET_BAT: + atkbd->enabled = false; + serio_reconnect(atkbd->ps2dev.serio); + goto out; + case ATKBD_RET_EMUL0: + atkbd->emul = 1; + goto out; + case ATKBD_RET_EMUL1: + atkbd->emul = 2; + goto out; + case ATKBD_RET_RELEASE: + atkbd->release = true; + goto out; + case ATKBD_RET_ACK: + case ATKBD_RET_NAK: + if (printk_ratelimit()) + dev_warn(&serio->dev, + "Spurious %s on %s. " + "Some program might be trying to access hardware directly.\n", + data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); + goto out; + case ATKBD_RET_ERR: + atkbd->err_count++; + dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n", + serio->phys); + goto out; + } + + code = atkbd_compat_scancode(atkbd, code); + + if (atkbd->emul && --atkbd->emul) + goto out; + + keycode = atkbd->keycode[code]; + + if (!(atkbd->release && test_bit(code, atkbd->force_release_mask))) + if (keycode != ATKBD_KEY_NULL) + input_event(dev, EV_MSC, MSC_SCAN, code); + + switch (keycode) { + case ATKBD_KEY_NULL: + break; + case ATKBD_KEY_UNKNOWN: + dev_warn(&serio->dev, + "Unknown key %s (%s set %d, code %#x on %s).\n", + atkbd->release ? "released" : "pressed", + atkbd->translated ? "translated" : "raw", + atkbd->set, code, serio->phys); + dev_warn(&serio->dev, + "Use 'setkeycodes %s%02x <keycode>' to make it known.\n", + code & 0x80 ? "e0" : "", code & 0x7f); + input_sync(dev); + break; + case ATKBD_SCR_1: + scroll = 1; + break; + case ATKBD_SCR_2: + scroll = 2; + break; + case ATKBD_SCR_4: + scroll = 4; + break; + case ATKBD_SCR_8: + scroll = 8; + break; + case ATKBD_SCR_CLICK: + click = !atkbd->release; + break; + case ATKBD_SCR_LEFT: + hscroll = -1; + break; + case ATKBD_SCR_RIGHT: + hscroll = 1; + break; + default: + if (atkbd->release) { + value = 0; + atkbd->last = 0; + } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) { + /* Workaround Toshiba laptop multiple keypress */ + value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2; + } else { + value = 1; + atkbd->last = code; + atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2; + } + + input_event(dev, EV_KEY, keycode, value); + input_sync(dev); + + if (value && test_bit(code, atkbd->force_release_mask)) { + input_event(dev, EV_MSC, MSC_SCAN, code); + input_report_key(dev, keycode, 0); + input_sync(dev); + } + } + + if (atkbd->scroll) { + if (click != -1) + input_report_key(dev, BTN_MIDDLE, click); + input_report_rel(dev, REL_WHEEL, + atkbd->release ? -scroll : scroll); + input_report_rel(dev, REL_HWHEEL, hscroll); + input_sync(dev); + } + + atkbd->release = false; +out: + return IRQ_HANDLED; +} + +static int atkbd_set_repeat_rate(struct atkbd *atkbd) +{ + const short period[32] = + { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125, + 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 }; + const short delay[4] = + { 250, 500, 750, 1000 }; + + struct input_dev *dev = atkbd->dev; + unsigned char param; + int i = 0, j = 0; + + while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD]) + i++; + dev->rep[REP_PERIOD] = period[i]; + + while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) + j++; + dev->rep[REP_DELAY] = delay[j]; + + param = i | (j << 5); + return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP); +} + +static int atkbd_set_leds(struct atkbd *atkbd) +{ + struct input_dev *dev = atkbd->dev; + unsigned char param[2]; + + param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0) + | (test_bit(LED_NUML, dev->led) ? 2 : 0) + | (test_bit(LED_CAPSL, dev->led) ? 4 : 0); + if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS)) + return -1; + + if (atkbd->extra) { + param[0] = 0; + param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0) + | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0) + | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0) + | (test_bit(LED_MISC, dev->led) ? 0x10 : 0) + | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0); + if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS)) + return -1; + } + + return 0; +} + +/* + * atkbd_event_work() is used to complete processing of events that + * can not be processed by input_event() which is often called from + * interrupt context. + */ + +static void atkbd_event_work(struct work_struct *work) +{ + struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); + + mutex_lock(&atkbd->mutex); + + if (!atkbd->enabled) { + /* + * Serio ports are resumed asynchronously so while driver core + * thinks that device is already fully operational in reality + * it may not be ready yet. In this case we need to keep + * rescheduling till reconnect completes. + */ + schedule_delayed_work(&atkbd->event_work, + msecs_to_jiffies(100)); + } else { + if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) + atkbd_set_leds(atkbd); + + if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) + atkbd_set_repeat_rate(atkbd); + } + + mutex_unlock(&atkbd->mutex); +} + +/* + * Schedule switch for execution. We need to throttle requests, + * otherwise keyboard may become unresponsive. + */ +static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) +{ + unsigned long delay = msecs_to_jiffies(50); + + if (time_after(jiffies, atkbd->event_jiffies + delay)) + delay = 0; + + atkbd->event_jiffies = jiffies; + set_bit(event_bit, &atkbd->event_mask); + mb(); + schedule_delayed_work(&atkbd->event_work, delay); +} + +/* + * Event callback from the input module. Events that change the state of + * the hardware are processed here. If action can not be performed in + * interrupt context it is offloaded to atkbd_event_work. + */ + +static int atkbd_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) +{ + struct atkbd *atkbd = input_get_drvdata(dev); + + if (!atkbd->write) + return -1; + + switch (type) { + + case EV_LED: + atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT); + return 0; + + case EV_REP: + if (!atkbd->softrepeat) + atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT); + return 0; + + default: + return -1; + } +} + +/* + * atkbd_enable() signals that interrupt handler is allowed to + * generate input events. + */ + +static inline void atkbd_enable(struct atkbd *atkbd) +{ + serio_pause_rx(atkbd->ps2dev.serio); + atkbd->enabled = true; + serio_continue_rx(atkbd->ps2dev.serio); +} + +/* + * atkbd_disable() tells input handler that all incoming data except + * for ACKs and command response should be dropped. + */ + +static inline void atkbd_disable(struct atkbd *atkbd) +{ + serio_pause_rx(atkbd->ps2dev.serio); + atkbd->enabled = false; + serio_continue_rx(atkbd->ps2dev.serio); +} + +static int atkbd_activate(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + +/* + * Enable the keyboard to receive keystrokes. + */ + + if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { + dev_err(&ps2dev->serio->dev, + "Failed to enable keyboard on %s\n", + ps2dev->serio->phys); + return -1; + } + + return 0; +} + +/* + * atkbd_deactivate() resets and disables the keyboard from sending + * keystrokes. + */ + +static void atkbd_deactivate(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + + if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS)) + dev_err(&ps2dev->serio->dev, + "Failed to deactivate keyboard on %s\n", + ps2dev->serio->phys); +} + +/* + * atkbd_probe() probes for an AT keyboard on a serio port. + */ + +static int atkbd_probe(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + unsigned char param[2]; + +/* + * Some systems, where the bit-twiddling when testing the io-lines of the + * controller may confuse the keyboard need a full reset of the keyboard. On + * these systems the BIOS also usually doesn't do it for us. + */ + + if (atkbd_reset) + if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT)) + dev_warn(&ps2dev->serio->dev, + "keyboard reset failed on %s\n", + ps2dev->serio->phys); + +/* + * Then we check the keyboard ID. We should get 0xab83 under normal conditions. + * Some keyboards report different values, but the first byte is always 0xab or + * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this + * should make sure we don't try to set the LEDs on it. + */ + + param[0] = param[1] = 0xa5; /* initialize with invalid values */ + if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { + +/* + * If the get ID command failed, we check if we can at least set the LEDs on + * the keyboard. This should work on every keyboard out there. It also turns + * the LEDs off, which we want anyway. + */ + param[0] = 0; + if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) + return -1; + atkbd->id = 0xabba; + return 0; + } + + if (!ps2_is_keyboard_id(param[0])) + return -1; + + atkbd->id = (param[0] << 8) | param[1]; + + if (atkbd->id == 0xaca1 && atkbd->translated) { + dev_err(&ps2dev->serio->dev, + "NCD terminal keyboards are only supported on non-translating controllers. " + "Use i8042.direct=1 to disable translation.\n"); + return -1; + } + +/* + * Make sure nothing is coming from the keyboard and disturbs our + * internal state. + */ + if (!atkbd_skip_deactivate) + atkbd_deactivate(atkbd); + + return 0; +} + +/* + * atkbd_select_set checks if a keyboard has a working Set 3 support, and + * sets it into that. Unfortunately there are keyboards that can be switched + * to Set 3, but don't work well in that (BTC Multimedia ...) + */ + +static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + unsigned char param[2]; + + atkbd->extra = false; +/* + * For known special keyboards we can go ahead and set the correct set. + * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and + * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards. + */ + + if (atkbd->translated) + return 2; + + if (atkbd->id == 0xaca1) { + param[0] = 3; + ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET); + return 3; + } + + if (allow_extra) { + param[0] = 0x71; + if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) { + atkbd->extra = true; + return 2; + } + } + + if (atkbd_terminal) { + ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); + return 3; + } + + if (target_set != 3) + return 2; + + if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) { + atkbd->id = param[0] << 8 | param[1]; + return 2; + } + + param[0] = 3; + if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) + return 2; + + param[0] = 0; + if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET)) + return 2; + + if (param[0] != 3) { + param[0] = 2; + if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) + return 2; + } + + ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR); + + return 3; +} + +static int atkbd_reset_state(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + unsigned char param[1]; + +/* + * Set the LEDs to a predefined state (all off). + */ + + param[0] = 0; + if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) + return -1; + +/* + * Set autorepeat to fastest possible. + */ + + param[0] = 0; + if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) + return -1; + + return 0; +} + +/* + * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a + * reboot. + */ + +static void atkbd_cleanup(struct serio *serio) +{ + struct atkbd *atkbd = serio_get_drvdata(serio); + + atkbd_disable(atkbd); + ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); +} + + +/* + * atkbd_disconnect() closes and frees. + */ + +static void atkbd_disconnect(struct serio *serio) +{ + struct atkbd *atkbd = serio_get_drvdata(serio); + + sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); + + atkbd_disable(atkbd); + + input_unregister_device(atkbd->dev); + + /* + * Make sure we don't have a command in flight. + * Note that since atkbd->enabled is false event work will keep + * rescheduling itself until it gets canceled and will not try + * accessing freed input device or serio port. + */ + cancel_delayed_work_sync(&atkbd->event_work); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + kfree(atkbd); +} + +/* + * generate release events for the keycodes given in data + */ +static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd, + const void *data) +{ + const unsigned int *keys = data; + unsigned int i; + + if (atkbd->set == 2) + for (i = 0; keys[i] != -1U; i++) + __set_bit(keys[i], atkbd->force_release_mask); +} + +/* + * Most special keys (Fn+F?) on Dell laptops do not generate release + * events so we have to do it ourselves. + */ +static unsigned int atkbd_dell_laptop_forced_release_keys[] = { + 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U +}; + +/* + * Perform fixup for HP system that doesn't generate release + * for its video switch + */ +static unsigned int atkbd_hp_forced_release_keys[] = { + 0x94, -1U +}; + +/* + * Samsung NC10,NC20 with Fn+F? key release not working + */ +static unsigned int atkbd_samsung_forced_release_keys[] = { + 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U +}; + +/* + * Amilo Pi 3525 key release for Fn+Volume keys not working + */ +static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { + 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U +}; + +/* + * Amilo Xi 3650 key release for light touch bar not working + */ +static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { + 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U +}; + +/* + * Soltech TA12 system with broken key release on volume keys and mute key + */ +static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { + 0xa0, 0xae, 0xb0, -1U +}; + +/* + * Many notebooks don't send key release event for volume up/down + * keys, with key list below common among them + */ +static unsigned int atkbd_volume_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; + +/* + * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas + * they should be generating e4-e6 (0x80 | code). + */ +static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, + unsigned int code) +{ + if (atkbd->translated && atkbd->emul == 1 && + (code == 0x64 || code == 0x65 || code == 0x66)) { + atkbd->emul = 0; + code |= 0x80; + } + + return code; +} + +/* + * atkbd_set_keycode_table() initializes keyboard's keycode table + * according to the selected scancode set + */ + +static void atkbd_set_keycode_table(struct atkbd *atkbd) +{ + unsigned int scancode; + int i, j; + + memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); + bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); + + if (atkbd->translated) { + for (i = 0; i < 128; i++) { + scancode = atkbd_unxlate_table[i]; + atkbd->keycode[i] = atkbd_set2_keycode[scancode]; + atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80]; + if (atkbd->scroll) + for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++) + if ((scancode | 0x80) == atkbd_scroll_keys[j].set2) + atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; + } + } else if (atkbd->set == 3) { + memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); + } else { + memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); + + if (atkbd->scroll) + for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) { + scancode = atkbd_scroll_keys[i].set2; + atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode; + } + } + +/* + * HANGEUL and HANJA keys do not send release events so we need to + * generate such events ourselves + */ + scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL); + atkbd->keycode[scancode] = KEY_HANGEUL; + __set_bit(scancode, atkbd->force_release_mask); + + scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA); + atkbd->keycode[scancode] = KEY_HANJA; + __set_bit(scancode, atkbd->force_release_mask); + +/* + * Perform additional fixups + */ + if (atkbd_platform_fixup) + atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); +} + +/* + * atkbd_set_device_attrs() sets up keyboard's input device structure + */ + +static void atkbd_set_device_attrs(struct atkbd *atkbd) +{ + struct input_dev *input_dev = atkbd->dev; + int i; + + if (atkbd->extra) + snprintf(atkbd->name, sizeof(atkbd->name), + "AT Set 2 Extra keyboard"); + else + snprintf(atkbd->name, sizeof(atkbd->name), + "AT %s Set %d keyboard", + atkbd->translated ? "Translated" : "Raw", atkbd->set); + + snprintf(atkbd->phys, sizeof(atkbd->phys), + "%s/input0", atkbd->ps2dev.serio->phys); + + input_dev->name = atkbd->name; + input_dev->phys = atkbd->phys; + input_dev->id.bustype = BUS_I8042; + input_dev->id.vendor = 0x0001; + input_dev->id.product = atkbd->translated ? 1 : atkbd->set; + input_dev->id.version = atkbd->id; + input_dev->event = atkbd_event; + input_dev->dev.parent = &atkbd->ps2dev.serio->dev; + + input_set_drvdata(input_dev, atkbd); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | + BIT_MASK(EV_MSC); + + if (atkbd->write) { + input_dev->evbit[0] |= BIT_MASK(EV_LED); + input_dev->ledbit[0] = BIT_MASK(LED_NUML) | + BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL); + } + + if (atkbd->extra) + input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) | + BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) | + BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC); + + if (!atkbd->softrepeat) { + input_dev->rep[REP_DELAY] = 250; + input_dev->rep[REP_PERIOD] = 33; + } + + input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) : + BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN); + + if (atkbd->scroll) { + input_dev->evbit[0] |= BIT_MASK(EV_REL); + input_dev->relbit[0] = BIT_MASK(REL_WHEEL) | + BIT_MASK(REL_HWHEEL); + __set_bit(BTN_MIDDLE, input_dev->keybit); + } + + input_dev->keycode = atkbd->keycode; + input_dev->keycodesize = sizeof(unsigned short); + input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); + + for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) { + if (atkbd->keycode[i] != KEY_RESERVED && + atkbd->keycode[i] != ATKBD_KEY_NULL && + atkbd->keycode[i] < ATKBD_SPECIAL) { + __set_bit(atkbd->keycode[i], input_dev->keybit); + } + } +} + +/* + * atkbd_connect() is called when the serio module finds an interface + * that isn't handled yet by an appropriate device driver. We check if + * there is an AT keyboard out there and if yes, we register ourselves + * to the input module. + */ + +static int atkbd_connect(struct serio *serio, struct serio_driver *drv) +{ + struct atkbd *atkbd; + struct input_dev *dev; + int err = -ENOMEM; + + atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL); + dev = input_allocate_device(); + if (!atkbd || !dev) + goto fail1; + + atkbd->dev = dev; + ps2_init(&atkbd->ps2dev, serio); + INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); + mutex_init(&atkbd->mutex); + + switch (serio->id.type) { + + case SERIO_8042_XL: + atkbd->translated = true; + /* Fall through */ + + case SERIO_8042: + if (serio->write) + atkbd->write = true; + break; + } + + atkbd->softraw = atkbd_softraw; + atkbd->softrepeat = atkbd_softrepeat; + atkbd->scroll = atkbd_scroll; + + if (atkbd->softrepeat) + atkbd->softraw = true; + + serio_set_drvdata(serio, atkbd); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + if (atkbd->write) { + + if (atkbd_probe(atkbd)) { + err = -ENODEV; + goto fail3; + } + + atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); + atkbd_reset_state(atkbd); + + } else { + atkbd->set = 2; + atkbd->id = 0xab00; + } + + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + err = sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group); + if (err) + goto fail3; + + atkbd_enable(atkbd); + if (serio->write) + atkbd_activate(atkbd); + + err = input_register_device(atkbd->dev); + if (err) + goto fail4; + + return 0; + + fail4: sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(dev); + kfree(atkbd); + return err; +} + +/* + * atkbd_reconnect() tries to restore keyboard into a sane state and is + * most likely called on resume. + */ + +static int atkbd_reconnect(struct serio *serio) +{ + struct atkbd *atkbd = serio_get_drvdata(serio); + struct serio_driver *drv = serio->drv; + int retval = -1; + + if (!atkbd || !drv) { + dev_dbg(&serio->dev, + "reconnect request, but serio is disconnected, ignoring...\n"); + return -1; + } + + mutex_lock(&atkbd->mutex); + + atkbd_disable(atkbd); + + if (atkbd->write) { + if (atkbd_probe(atkbd)) + goto out; + + if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) + goto out; + + /* + * Restore LED state and repeat rate. While input core + * will do this for us at resume time reconnect may happen + * because user requested it via sysfs or simply because + * keyboard was unplugged and plugged in again so we need + * to do it ourselves here. + */ + atkbd_set_leds(atkbd); + if (!atkbd->softrepeat) + atkbd_set_repeat_rate(atkbd); + + } + + /* + * Reset our state machine in case reconnect happened in the middle + * of multi-byte scancode. + */ + atkbd->xl_bit = 0; + atkbd->emul = 0; + + atkbd_enable(atkbd); + if (atkbd->write) + atkbd_activate(atkbd); + + retval = 0; + + out: + mutex_unlock(&atkbd->mutex); + return retval; +} + +static const struct serio_device_id atkbd_serio_ids[] = { + { + .type = SERIO_8042, + .proto = SERIO_ANY, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { + .type = SERIO_8042_XL, + .proto = SERIO_ANY, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { + .type = SERIO_RS232, + .proto = SERIO_PS2SER, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, atkbd_serio_ids); + +static struct serio_driver atkbd_drv = { + .driver = { + .name = "atkbd", + }, + .description = DRIVER_DESC, + .id_table = atkbd_serio_ids, + .interrupt = atkbd_interrupt, + .connect = atkbd_connect, + .reconnect = atkbd_reconnect, + .disconnect = atkbd_disconnect, + .cleanup = atkbd_cleanup, +}; + +static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, + ssize_t (*handler)(struct atkbd *, char *)) +{ + struct serio *serio = to_serio_port(dev); + struct atkbd *atkbd = serio_get_drvdata(serio); + + return handler(atkbd, buf); +} + +static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, + ssize_t (*handler)(struct atkbd *, const char *, size_t)) +{ + struct serio *serio = to_serio_port(dev); + struct atkbd *atkbd = serio_get_drvdata(serio); + int retval; + + retval = mutex_lock_interruptible(&atkbd->mutex); + if (retval) + return retval; + + atkbd_disable(atkbd); + retval = handler(atkbd, buf, count); + atkbd_enable(atkbd); + + mutex_unlock(&atkbd->mutex); + + return retval; +} + +static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) +{ + return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0); +} + +static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) +{ + struct input_dev *old_dev, *new_dev; + unsigned int value; + int err; + bool old_extra; + unsigned char old_set; + + if (!atkbd->write) + return -EIO; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) + return -EINVAL; + + if (atkbd->extra != value) { + /* + * Since device's properties will change we need to + * unregister old device. But allocate and register + * new one first to make sure we have it. + */ + old_dev = atkbd->dev; + old_extra = atkbd->extra; + old_set = atkbd->set; + + new_dev = input_allocate_device(); + if (!new_dev) + return -ENOMEM; + + atkbd->dev = new_dev; + atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); + atkbd_reset_state(atkbd); + atkbd_activate(atkbd); + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + err = input_register_device(atkbd->dev); + if (err) { + input_free_device(new_dev); + + atkbd->dev = old_dev; + atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + return err; + } + input_unregister_device(old_dev); + + } + return count; +} + +static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf) +{ + size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", + ATKBD_KEYMAP_SIZE, atkbd->force_release_mask); + + buf[len++] = '\n'; + buf[len] = '\0'; + + return len; +} + +static ssize_t atkbd_set_force_release(struct atkbd *atkbd, + const char *buf, size_t count) +{ + /* 64 bytes on stack should be acceptable */ + DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE); + int err; + + err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE); + if (err) + return err; + + memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask)); + return count; +} + + +static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) +{ + return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0); +} + +static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) +{ + struct input_dev *old_dev, *new_dev; + unsigned int value; + int err; + bool old_scroll; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) + return -EINVAL; + + if (atkbd->scroll != value) { + old_dev = atkbd->dev; + old_scroll = atkbd->scroll; + + new_dev = input_allocate_device(); + if (!new_dev) + return -ENOMEM; + + atkbd->dev = new_dev; + atkbd->scroll = value; + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + err = input_register_device(atkbd->dev); + if (err) { + input_free_device(new_dev); + + atkbd->scroll = old_scroll; + atkbd->dev = old_dev; + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + return err; + } + input_unregister_device(old_dev); + } + return count; +} + +static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) +{ + return sprintf(buf, "%d\n", atkbd->set); +} + +static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) +{ + struct input_dev *old_dev, *new_dev; + unsigned int value; + int err; + unsigned char old_set; + bool old_extra; + + if (!atkbd->write) + return -EIO; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value != 2 && value != 3) + return -EINVAL; + + if (atkbd->set != value) { + old_dev = atkbd->dev; + old_extra = atkbd->extra; + old_set = atkbd->set; + + new_dev = input_allocate_device(); + if (!new_dev) + return -ENOMEM; + + atkbd->dev = new_dev; + atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); + atkbd_reset_state(atkbd); + atkbd_activate(atkbd); + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + err = input_register_device(atkbd->dev); + if (err) { + input_free_device(new_dev); + + atkbd->dev = old_dev; + atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); + atkbd_set_keycode_table(atkbd); + atkbd_set_device_attrs(atkbd); + + return err; + } + input_unregister_device(old_dev); + } + return count; +} + +static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) +{ + return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0); +} + +static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) +{ + struct input_dev *old_dev, *new_dev; + unsigned int value; + int err; + bool old_softrepeat, old_softraw; + + if (!atkbd->write) + return -EIO; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) + return -EINVAL; + + if (atkbd->softrepeat != value) { + old_dev = atkbd->dev; + old_softrepeat = atkbd->softrepeat; + old_softraw = atkbd->softraw; + + new_dev = input_allocate_device(); + if (!new_dev) + return -ENOMEM; + + atkbd->dev = new_dev; + atkbd->softrepeat = value; + if (atkbd->softrepeat) + atkbd->softraw = true; + atkbd_set_device_attrs(atkbd); + + err = input_register_device(atkbd->dev); + if (err) { + input_free_device(new_dev); + + atkbd->dev = old_dev; + atkbd->softrepeat = old_softrepeat; + atkbd->softraw = old_softraw; + atkbd_set_device_attrs(atkbd); + + return err; + } + input_unregister_device(old_dev); + } + return count; +} + + +static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) +{ + return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0); +} + +static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) +{ + struct input_dev *old_dev, *new_dev; + unsigned int value; + int err; + bool old_softraw; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) + return -EINVAL; + + if (atkbd->softraw != value) { + old_dev = atkbd->dev; + old_softraw = atkbd->softraw; + + new_dev = input_allocate_device(); + if (!new_dev) + return -ENOMEM; + + atkbd->dev = new_dev; + atkbd->softraw = value; + atkbd_set_device_attrs(atkbd); + + err = input_register_device(atkbd->dev); + if (err) { + input_free_device(new_dev); + + atkbd->dev = old_dev; + atkbd->softraw = old_softraw; + atkbd_set_device_attrs(atkbd); + + return err; + } + input_unregister_device(old_dev); + } + return count; +} + +static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) +{ + return sprintf(buf, "%lu\n", atkbd->err_count); +} + +static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) +{ + atkbd_platform_fixup = atkbd_apply_forced_release_keylist; + atkbd_platform_fixup_data = id->driver_data; + + return 1; +} + +static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) +{ + atkbd_platform_scancode_fixup = id->driver_data; + + return 1; +} + +static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) +{ + atkbd_skip_deactivate = true; + return 1; +} + +/* + * NOTE: do not add any more "force release" quirks to this table. The + * task of adjusting list of keys that should be "released" automatically + * by the driver is now delegated to userspace tools, such as udev, so + * submit such quirks there. + */ +static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_volume_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_volume_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_volume_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_volume_forced_release_keys, + }, + { + /* Inventec Symphony */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_volume_forced_release_keys, + }, + { + /* Samsung NC10 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + /* Samsung NC20 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + /* Samsung SQ45S70S */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + /* Fujitsu Amilo PA 1510 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_volume_forced_release_keys, + }, + { + /* Fujitsu Amilo Pi 3525 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pi3525_forced_release_keys, + }, + { + /* Fujitsu Amilo Xi 3650 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_xi3650_forced_release_keys, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkdb_soltech_ta12_forced_release_keys, + }, + { + /* OQO Model 01+ */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "OQO"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), + }, + .callback = atkbd_setup_scancode_fixup, + .driver_data = atkbd_oqo_01plus_scancode_fixup, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), + }, + .callback = atkbd_deactivate_fixup, + }, + { } +}; + +static int __init atkbd_init(void) +{ + dmi_check_system(atkbd_dmi_quirk_table); + + return serio_register_driver(&atkbd_drv); +} + +static void __exit atkbd_exit(void) +{ + serio_unregister_driver(&atkbd_drv); +} + +module_init(atkbd_init); +module_exit(atkbd_exit); diff --git a/drivers/input/keyboard/bcm-keypad.c b/drivers/input/keyboard/bcm-keypad.c new file mode 100644 index 000000000..e1cf63ee1 --- /dev/null +++ b/drivers/input/keyboard/bcm-keypad.c @@ -0,0 +1,456 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/gfp.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/stddef.h> +#include <linux/types.h> + +#define DEFAULT_CLK_HZ 31250 +#define MAX_ROWS 8 +#define MAX_COLS 8 + +/* Register/field definitions */ +#define KPCR_OFFSET 0x00000080 +#define KPCR_MODE 0x00000002 +#define KPCR_MODE_SHIFT 1 +#define KPCR_MODE_MASK 1 +#define KPCR_ENABLE 0x00000001 +#define KPCR_STATUSFILTERENABLE 0x00008000 +#define KPCR_STATUSFILTERTYPE_SHIFT 12 +#define KPCR_COLFILTERENABLE 0x00000800 +#define KPCR_COLFILTERTYPE_SHIFT 8 +#define KPCR_ROWWIDTH_SHIFT 20 +#define KPCR_COLUMNWIDTH_SHIFT 16 + +#define KPIOR_OFFSET 0x00000084 +#define KPIOR_ROWOCONTRL_SHIFT 24 +#define KPIOR_ROWOCONTRL_MASK 0xFF000000 +#define KPIOR_COLUMNOCONTRL_SHIFT 16 +#define KPIOR_COLUMNOCONTRL_MASK 0x00FF0000 +#define KPIOR_COLUMN_IO_DATA_SHIFT 0 + +#define KPEMR0_OFFSET 0x00000090 +#define KPEMR1_OFFSET 0x00000094 +#define KPEMR2_OFFSET 0x00000098 +#define KPEMR3_OFFSET 0x0000009C +#define KPEMR_EDGETYPE_BOTH 3 + +#define KPSSR0_OFFSET 0x000000A0 +#define KPSSR1_OFFSET 0x000000A4 +#define KPSSRN_OFFSET(reg_n) (KPSSR0_OFFSET + 4 * (reg_n)) +#define KPIMR0_OFFSET 0x000000B0 +#define KPIMR1_OFFSET 0x000000B4 +#define KPICR0_OFFSET 0x000000B8 +#define KPICR1_OFFSET 0x000000BC +#define KPICRN_OFFSET(reg_n) (KPICR0_OFFSET + 4 * (reg_n)) +#define KPISR0_OFFSET 0x000000C0 +#define KPISR1_OFFSET 0x000000C4 + +#define KPCR_STATUSFILTERTYPE_MAX 7 +#define KPCR_COLFILTERTYPE_MAX 7 + +/* Macros to determine the row/column from a bit that is set in SSR0/1. */ +#define BIT_TO_ROW_SSRN(bit_nr, reg_n) (((bit_nr) >> 3) + 4 * (reg_n)) +#define BIT_TO_COL(bit_nr) ((bit_nr) % 8) + +/* Structure representing various run-time entities */ +struct bcm_kp { + void __iomem *base; + int irq; + struct clk *clk; + struct input_dev *input_dev; + unsigned long last_state[2]; + unsigned int n_rows; + unsigned int n_cols; + u32 kpcr; + u32 kpior; + u32 kpemr; + u32 imr0_val; + u32 imr1_val; +}; + +/* + * Returns the keycode from the input device keymap given the row and + * column. + */ +static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col) +{ + unsigned int row_shift = get_count_order(kp->n_cols); + unsigned short *keymap = kp->input_dev->keycode; + + return keymap[MATRIX_SCAN_CODE(row, col, row_shift)]; +} + +static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode) +{ + unsigned long state, change; + int bit_nr; + int key_press; + int row, col; + unsigned int keycode; + + /* Clear interrupts */ + writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num)); + + state = readl(kp->base + KPSSRN_OFFSET(reg_num)); + change = kp->last_state[reg_num] ^ state; + kp->last_state[reg_num] = state; + + for_each_set_bit(bit_nr, &change, BITS_PER_LONG) { + key_press = state & BIT(bit_nr); + /* The meaning of SSR register depends on pull mode. */ + key_press = pull_mode ? !key_press : key_press; + row = BIT_TO_ROW_SSRN(bit_nr, reg_num); + col = BIT_TO_COL(bit_nr); + keycode = bcm_kp_get_keycode(kp, row, col); + input_report_key(kp->input_dev, keycode, key_press); + } +} + +static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id) +{ + struct bcm_kp *kp = dev_id; + int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK; + int reg_num; + + for (reg_num = 0; reg_num <= 1; reg_num++) + bcm_kp_report_keys(kp, reg_num, pull_mode); + + input_sync(kp->input_dev); + + return IRQ_HANDLED; +} + +static int bcm_kp_start(struct bcm_kp *kp) +{ + int error; + + if (kp->clk) { + error = clk_prepare_enable(kp->clk); + if (error) + return error; + } + + writel(kp->kpior, kp->base + KPIOR_OFFSET); + + writel(kp->imr0_val, kp->base + KPIMR0_OFFSET); + writel(kp->imr1_val, kp->base + KPIMR1_OFFSET); + + writel(kp->kpemr, kp->base + KPEMR0_OFFSET); + writel(kp->kpemr, kp->base + KPEMR1_OFFSET); + writel(kp->kpemr, kp->base + KPEMR2_OFFSET); + writel(kp->kpemr, kp->base + KPEMR3_OFFSET); + + writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET); + writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET); + + kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET); + kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET); + + writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET); + + return 0; +} + +static void bcm_kp_stop(const struct bcm_kp *kp) +{ + u32 val; + + val = readl(kp->base + KPCR_OFFSET); + val &= ~KPCR_ENABLE; + writel(0, kp->base + KPCR_OFFSET); + writel(0, kp->base + KPIMR0_OFFSET); + writel(0, kp->base + KPIMR1_OFFSET); + writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET); + writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET); + + if (kp->clk) + clk_disable_unprepare(kp->clk); +} + +static int bcm_kp_open(struct input_dev *dev) +{ + struct bcm_kp *kp = input_get_drvdata(dev); + + return bcm_kp_start(kp); +} + +static void bcm_kp_close(struct input_dev *dev) +{ + struct bcm_kp *kp = input_get_drvdata(dev); + + bcm_kp_stop(kp); +} + +static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp) +{ + struct device *dev = kp->input_dev->dev.parent; + struct device_node *np = dev->of_node; + int error; + unsigned int dt_val; + unsigned int i; + unsigned int num_rows, col_mask, rows_set; + + /* Initialize the KPCR Keypad Configuration Register */ + kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE; + + error = matrix_keypad_parse_properties(dev, &kp->n_rows, &kp->n_cols); + if (error) { + dev_err(dev, "failed to parse kp params\n"); + return error; + } + + /* Set row width for the ASIC block. */ + kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT; + + /* Set column width for the ASIC block. */ + kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT; + + /* Configure the IMR registers */ + + /* + * IMR registers contain interrupt enable bits for 8x8 matrix + * IMR0 register format: <row3> <row2> <row1> <row0> + * IMR1 register format: <row7> <row6> <row5> <row4> + */ + col_mask = (1 << (kp->n_cols)) - 1; + num_rows = kp->n_rows; + + /* Set column bits in rows 0 to 3 in IMR0 */ + kp->imr0_val = col_mask; + + rows_set = 1; + while (--num_rows && rows_set++ < 4) + kp->imr0_val |= kp->imr0_val << MAX_COLS; + + /* Set column bits in rows 4 to 7 in IMR1 */ + kp->imr1_val = 0; + if (num_rows) { + kp->imr1_val = col_mask; + while (--num_rows) + kp->imr1_val |= kp->imr1_val << MAX_COLS; + } + + /* Initialize the KPEMR Keypress Edge Mode Registers */ + /* Trigger on both edges */ + kp->kpemr = 0; + for (i = 0; i <= 30; i += 2) + kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i); + + /* + * Obtain the Status filter debounce value and verify against the + * possible values specified in the DT binding. + */ + of_property_read_u32(np, "status-debounce-filter-period", &dt_val); + + if (dt_val > KPCR_STATUSFILTERTYPE_MAX) { + dev_err(dev, "Invalid Status filter debounce value %d\n", + dt_val); + return -EINVAL; + } + + kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT; + + /* + * Obtain the Column filter debounce value and verify against the + * possible values specified in the DT binding. + */ + of_property_read_u32(np, "col-debounce-filter-period", &dt_val); + + if (dt_val > KPCR_COLFILTERTYPE_MAX) { + dev_err(dev, "Invalid Column filter debounce value %d\n", + dt_val); + return -EINVAL; + } + + kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT; + + /* + * Determine between the row and column, + * which should be configured as output. + */ + if (of_property_read_bool(np, "row-output-enabled")) { + /* + * Set RowOContrl or ColumnOContrl in KPIOR + * to the number of pins to drive as outputs + */ + kp->kpior = ((1 << kp->n_rows) - 1) << + KPIOR_ROWOCONTRL_SHIFT; + } else { + kp->kpior = ((1 << kp->n_cols) - 1) << + KPIOR_COLUMNOCONTRL_SHIFT; + } + + /* + * Determine if the scan pull up needs to be enabled + */ + if (of_property_read_bool(np, "pull-up-enabled")) + kp->kpcr |= KPCR_MODE; + + dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n", + kp->n_rows, kp->n_cols, + kp->kpcr, kp->kpior, kp->kpemr); + + return 0; +} + + +static int bcm_kp_probe(struct platform_device *pdev) +{ + struct bcm_kp *kp; + struct input_dev *input_dev; + struct resource *res; + int error; + + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); + if (!kp) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + __set_bit(EV_KEY, input_dev->evbit); + + /* Enable auto repeat feature of Linux input subsystem */ + if (of_property_read_bool(pdev->dev.of_node, "autorepeat")) + __set_bit(EV_REP, input_dev->evbit); + + input_dev->name = pdev->name; + input_dev->phys = "keypad/input0"; + input_dev->dev.parent = &pdev->dev; + input_dev->open = bcm_kp_open; + input_dev->close = bcm_kp_close; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_set_drvdata(input_dev, kp); + + kp->input_dev = input_dev; + + error = bcm_kp_matrix_key_parse_dt(kp); + if (error) + return error; + + error = matrix_keypad_build_keymap(NULL, NULL, + kp->n_rows, kp->n_cols, + NULL, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return error; + } + + /* Get the KEYPAD base address */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing keypad base address resource\n"); + return -ENODEV; + } + + kp->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kp->base)) + return PTR_ERR(kp->base); + + /* Enable clock */ + kp->clk = devm_clk_get(&pdev->dev, "peri_clk"); + if (IS_ERR(kp->clk)) { + error = PTR_ERR(kp->clk); + if (error != -ENOENT) { + if (error != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get clock\n"); + return error; + } + dev_dbg(&pdev->dev, + "No clock specified. Assuming it's enabled\n"); + kp->clk = NULL; + } else { + unsigned int desired_rate; + long actual_rate; + + error = of_property_read_u32(pdev->dev.of_node, + "clock-frequency", &desired_rate); + if (error < 0) + desired_rate = DEFAULT_CLK_HZ; + + actual_rate = clk_round_rate(kp->clk, desired_rate); + if (actual_rate <= 0) + return -EINVAL; + + error = clk_set_rate(kp->clk, actual_rate); + if (error) + return error; + + error = clk_prepare_enable(kp->clk); + if (error) + return error; + } + + /* Put the kp into a known sane state */ + bcm_kp_stop(kp); + + kp->irq = platform_get_irq(pdev, 0); + if (kp->irq < 0) { + dev_err(&pdev->dev, "no IRQ specified\n"); + return -EINVAL; + } + + error = devm_request_threaded_irq(&pdev->dev, kp->irq, + NULL, bcm_kp_isr_thread, + IRQF_ONESHOT, pdev->name, kp); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + return 0; +} + +static const struct of_device_id bcm_kp_of_match[] = { + { .compatible = "brcm,bcm-keypad" }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm_kp_of_match); + +static struct platform_driver bcm_kp_device_driver = { + .probe = bcm_kp_probe, + .driver = { + .name = "bcm-keypad", + .of_match_table = of_match_ptr(bcm_kp_of_match), + } +}; + +module_platform_driver(bcm_kp_device_driver); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("BCM Keypad Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c new file mode 100644 index 000000000..73686c246 --- /dev/null +++ b/drivers/input/keyboard/cap11xx.c @@ -0,0 +1,501 @@ +/* + * Input driver for Microchip CAP11xx based capacitive touch sensors + * + * (c) 2014 Daniel Mack <linux@zonque.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/of_irq.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/gpio/consumer.h> + +#define CAP11XX_REG_MAIN_CONTROL 0x00 +#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6) +#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0) +#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4) +#define CAP11XX_REG_GENERAL_STATUS 0x02 +#define CAP11XX_REG_SENSOR_INPUT 0x03 +#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a +#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X)) +#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f +#define CAP11XX_REG_CONFIG 0x20 +#define CAP11XX_REG_SENSOR_ENABLE 0x21 +#define CAP11XX_REG_SENSOR_CONFIG 0x22 +#define CAP11XX_REG_SENSOR_CONFIG2 0x23 +#define CAP11XX_REG_SAMPLING_CONFIG 0x24 +#define CAP11XX_REG_CALIBRATION 0x26 +#define CAP11XX_REG_INT_ENABLE 0x27 +#define CAP11XX_REG_REPEAT_RATE 0x28 +#define CAP11XX_REG_MT_CONFIG 0x2a +#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b +#define CAP11XX_REG_MT_PATTERN 0x2d +#define CAP11XX_REG_RECALIB_CONFIG 0x2f +#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X)) +#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38 +#define CAP11XX_REG_STANDBY_CHANNEL 0x40 +#define CAP11XX_REG_STANDBY_CONFIG 0x41 +#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42 +#define CAP11XX_REG_STANDBY_THRESH 0x43 +#define CAP11XX_REG_CONFIG2 0x44 +#define CAP11XX_REG_CONFIG2_ALT_POL BIT(6) +#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP11XX_REG_LED_POLARITY 0x73 +#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74 + +#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90 +#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91 +#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92 +#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93 + +#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f) +#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0) +#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0) +#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4) +#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15) + +#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X)) +#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9 +#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba +#define CAP11XX_REG_PRODUCT_ID 0xfd +#define CAP11XX_REG_MANUFACTURER_ID 0xfe +#define CAP11XX_REG_REVISION 0xff + +#define CAP11XX_MANUFACTURER_ID 0x5d + +#ifdef CONFIG_LEDS_CLASS +struct cap11xx_led { + struct cap11xx_priv *priv; + struct led_classdev cdev; + u32 reg; +}; +#endif + +struct cap11xx_priv { + struct regmap *regmap; + struct input_dev *idev; + + struct cap11xx_led *leds; + int num_leds; + + /* config */ + u32 keycodes[]; +}; + +struct cap11xx_hw_model { + u8 product_id; + unsigned int num_channels; + unsigned int num_leds; +}; + +enum { + CAP1106, + CAP1126, + CAP1188, +}; + +static const struct cap11xx_hw_model cap11xx_devices[] = { + [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 }, + [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 }, + [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 }, +}; + +static const struct reg_default cap11xx_reg_defaults[] = { + { CAP11XX_REG_MAIN_CONTROL, 0x00 }, + { CAP11XX_REG_GENERAL_STATUS, 0x00 }, + { CAP11XX_REG_SENSOR_INPUT, 0x00 }, + { CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 }, + { CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f }, + { CAP11XX_REG_CONFIG, 0x20 }, + { CAP11XX_REG_SENSOR_ENABLE, 0x3f }, + { CAP11XX_REG_SENSOR_CONFIG, 0xa4 }, + { CAP11XX_REG_SENSOR_CONFIG2, 0x07 }, + { CAP11XX_REG_SAMPLING_CONFIG, 0x39 }, + { CAP11XX_REG_CALIBRATION, 0x00 }, + { CAP11XX_REG_INT_ENABLE, 0x3f }, + { CAP11XX_REG_REPEAT_RATE, 0x3f }, + { CAP11XX_REG_MT_CONFIG, 0x80 }, + { CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 }, + { CAP11XX_REG_MT_PATTERN, 0x3f }, + { CAP11XX_REG_RECALIB_CONFIG, 0x8a }, + { CAP11XX_REG_SENSOR_THRESH(0), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(1), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(2), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(3), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(4), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(5), 0x40 }, + { CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 }, + { CAP11XX_REG_STANDBY_CHANNEL, 0x00 }, + { CAP11XX_REG_STANDBY_CONFIG, 0x39 }, + { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 }, + { CAP11XX_REG_STANDBY_THRESH, 0x40 }, + { CAP11XX_REG_CONFIG2, 0x40 }, + { CAP11XX_REG_LED_POLARITY, 0x00 }, + { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 }, + { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 }, +}; + +static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CAP11XX_REG_MAIN_CONTROL: + case CAP11XX_REG_SENSOR_INPUT: + case CAP11XX_REG_SENOR_DELTA(0): + case CAP11XX_REG_SENOR_DELTA(1): + case CAP11XX_REG_SENOR_DELTA(2): + case CAP11XX_REG_SENOR_DELTA(3): + case CAP11XX_REG_SENOR_DELTA(4): + case CAP11XX_REG_SENOR_DELTA(5): + case CAP11XX_REG_PRODUCT_ID: + case CAP11XX_REG_MANUFACTURER_ID: + case CAP11XX_REG_REVISION: + return true; + } + + return false; +} + +static const struct regmap_config cap11xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = CAP11XX_REG_REVISION, + .reg_defaults = cap11xx_reg_defaults, + + .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = cap11xx_volatile_reg, +}; + +static irqreturn_t cap11xx_thread_func(int irq_num, void *data) +{ + struct cap11xx_priv *priv = data; + unsigned int status; + int ret, i; + + /* + * Deassert interrupt. This needs to be done before reading the status + * registers, which will not carry valid values otherwise. + */ + ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0); + if (ret < 0) + goto out; + + ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status); + if (ret < 0) + goto out; + + for (i = 0; i < priv->idev->keycodemax; i++) + input_report_key(priv->idev, priv->keycodes[i], + status & (1 << i)); + + input_sync(priv->idev); + +out: + return IRQ_HANDLED; +} + +static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) +{ + /* + * DLSEEP mode will turn off all LEDS, prevent this + */ + if (IS_ENABLED(CONFIG_LEDS_CLASS) && priv->num_leds) + return 0; + + return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_DLSEEP, + sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); +} + +static int cap11xx_input_open(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + return cap11xx_set_sleep(priv, false); +} + +static void cap11xx_input_close(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + cap11xx_set_sleep(priv, true); +} + +#ifdef CONFIG_LEDS_CLASS +static int cap11xx_led_set(struct led_classdev *cdev, + enum led_brightness value) +{ + struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); + struct cap11xx_priv *priv = led->priv; + + /* + * All LEDs share the same duty cycle as this is a HW + * limitation. Brightness levels per LED are either + * 0 (OFF) and 1 (ON). + */ + return regmap_update_bits(priv->regmap, + CAP11XX_REG_LED_OUTPUT_CONTROL, + BIT(led->reg), + value ? BIT(led->reg) : 0); +} + +static int cap11xx_init_leds(struct device *dev, + struct cap11xx_priv *priv, int num_leds) +{ + struct device_node *node = dev->of_node, *child; + struct cap11xx_led *led; + int cnt = of_get_child_count(node); + int error; + + if (!num_leds || !cnt) + return 0; + + if (cnt > num_leds) + return -EINVAL; + + led = devm_kcalloc(dev, cnt, sizeof(struct cap11xx_led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + priv->leds = led; + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0); + if (error) + return error; + + error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4, + CAP11XX_REG_LED_DUTY_MAX_MASK, + CAP11XX_REG_LED_DUTY_MAX_VALUE << + CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT); + if (error) + return error; + + for_each_child_of_node(node, child) { + u32 reg; + + led->cdev.name = + of_get_property(child, "label", NULL) ? : child->name; + led->cdev.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + led->cdev.flags = 0; + led->cdev.brightness_set_blocking = cap11xx_led_set; + led->cdev.max_brightness = 1; + led->cdev.brightness = LED_OFF; + + error = of_property_read_u32(child, "reg", ®); + if (error != 0 || reg >= num_leds) { + of_node_put(child); + return -EINVAL; + } + + led->reg = reg; + led->priv = priv; + + error = devm_led_classdev_register(dev, &led->cdev); + if (error) { + of_node_put(child); + return error; + } + + priv->num_leds++; + led++; + } + + return 0; +} +#else +static int cap11xx_init_leds(struct device *dev, + struct cap11xx_priv *priv, int num_leds) +{ + return 0; +} +#endif + +static int cap11xx_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c_client->dev; + struct cap11xx_priv *priv; + struct device_node *node; + const struct cap11xx_hw_model *cap; + int i, error, irq, gain = 0; + unsigned int val, rev; + u32 gain32; + + if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) { + dev_err(dev, "Invalid device ID %lu\n", id->driver_data); + return -EINVAL; + } + + cap = &cap11xx_devices[id->driver_data]; + if (!cap || !cap->num_channels) { + dev_err(dev, "Invalid device configuration\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, + struct_size(priv, keycodes, cap->num_channels), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val); + if (error) + return error; + + if (val != cap->product_id) { + dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", + val, cap->product_id); + return -ENXIO; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val); + if (error) + return error; + + if (val != CAP11XX_MANUFACTURER_ID) { + dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", + val, CAP11XX_MANUFACTURER_ID); + return -ENXIO; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev); + if (error < 0) + return error; + + dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev); + node = dev->of_node; + + if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { + if (is_power_of_2(gain32) && gain32 <= 8) + gain = ilog2(gain32); + else + dev_err(dev, "Invalid sensor-gain value %d\n", gain32); + } + + if (of_property_read_bool(node, "microchip,irq-active-high")) { + error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2, + CAP11XX_REG_CONFIG2_ALT_POL, 0); + if (error) + return error; + } + + /* Provide some useful defaults */ + for (i = 0; i < cap->num_channels; i++) + priv->keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + priv->keycodes, cap->num_channels); + + error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, + gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + if (error) + return error; + + priv->idev = devm_input_allocate_device(dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "CAP11XX capacitive touch sensor"; + priv->idev->id.bustype = BUS_I2C; + priv->idev->evbit[0] = BIT_MASK(EV_KEY); + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, priv->idev->evbit); + + for (i = 0; i < cap->num_channels; i++) + __set_bit(priv->keycodes[i], priv->idev->keybit); + + __clear_bit(KEY_RESERVED, priv->idev->keybit); + + priv->idev->keycode = priv->keycodes; + priv->idev->keycodesize = sizeof(priv->keycodes[0]); + priv->idev->keycodemax = cap->num_channels; + + priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID; + priv->idev->id.product = cap->product_id; + priv->idev->id.version = rev; + + priv->idev->open = cap11xx_input_open; + priv->idev->close = cap11xx_input_close; + + error = cap11xx_init_leds(dev, priv, cap->num_leds); + if (error) + return error; + + input_set_drvdata(priv->idev, priv); + + /* + * Put the device in deep sleep mode for now. + * ->open() will bring it back once the it is actually needed. + */ + cap11xx_set_sleep(priv, true); + + error = input_register_device(priv->idev); + if (error) + return error; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) { + dev_err(dev, "Unable to parse or map IRQ\n"); + return -ENXIO; + } + + error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func, + IRQF_ONESHOT, dev_name(dev), priv); + if (error) + return error; + + return 0; +} + +static const struct of_device_id cap11xx_dt_ids[] = { + { .compatible = "microchip,cap1106", }, + { .compatible = "microchip,cap1126", }, + { .compatible = "microchip,cap1188", }, + {} +}; +MODULE_DEVICE_TABLE(of, cap11xx_dt_ids); + +static const struct i2c_device_id cap11xx_i2c_ids[] = { + { "cap1106", CAP1106 }, + { "cap1126", CAP1126 }, + { "cap1188", CAP1188 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); + +static struct i2c_driver cap11xx_i2c_driver = { + .driver = { + .name = "cap11xx", + .of_match_table = cap11xx_dt_ids, + }, + .id_table = cap11xx_i2c_ids, + .probe = cap11xx_i2c_probe, +}; + +module_i2c_driver(cap11xx_i2c_driver); + +MODULE_DESCRIPTION("Microchip CAP11XX driver"); +MODULE_AUTHOR("Daniel Mack <linux@zonque.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/clps711x-keypad.c b/drivers/input/keyboard/clps711x-keypad.c new file mode 100644 index 000000000..e319f7457 --- /dev/null +++ b/drivers/input/keyboard/clps711x-keypad.c @@ -0,0 +1,201 @@ +/* + * Cirrus Logic CLPS711X Keypad driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/sched.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/clps711x.h> + +#define CLPS711X_KEYPAD_COL_COUNT 8 + +struct clps711x_gpio_data { + struct gpio_desc *desc; + DECLARE_BITMAP(last_state, CLPS711X_KEYPAD_COL_COUNT); +}; + +struct clps711x_keypad_data { + struct regmap *syscon; + int row_count; + unsigned int row_shift; + struct clps711x_gpio_data *gpio_data; +}; + +static void clps711x_keypad_poll(struct input_polled_dev *dev) +{ + const unsigned short *keycodes = dev->input->keycode; + struct clps711x_keypad_data *priv = dev->private; + bool sync = false; + int col, row; + + for (col = 0; col < CLPS711X_KEYPAD_COL_COUNT; col++) { + /* Assert column */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, + SYSCON1_KBDSCAN_MASK, + SYSCON1_KBDSCAN(8 + col)); + + /* Scan rows */ + for (row = 0; row < priv->row_count; row++) { + struct clps711x_gpio_data *data = &priv->gpio_data[row]; + bool state, state1; + + /* Read twice for protection against fluctuations */ + do { + state = gpiod_get_value_cansleep(data->desc); + cond_resched(); + state1 = gpiod_get_value_cansleep(data->desc); + } while (state != state1); + + if (test_bit(col, data->last_state) != state) { + int code = MATRIX_SCAN_CODE(row, col, + priv->row_shift); + + if (state) { + set_bit(col, data->last_state); + input_event(dev->input, EV_MSC, + MSC_SCAN, code); + } else { + clear_bit(col, data->last_state); + } + + if (keycodes[code]) + input_report_key(dev->input, + keycodes[code], state); + sync = true; + } + } + + /* Set all columns to low */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, + SYSCON1_KBDSCAN_MASK, SYSCON1_KBDSCAN(1)); + } + + if (sync) + input_sync(dev->input); +} + +static int clps711x_keypad_probe(struct platform_device *pdev) +{ + struct clps711x_keypad_data *priv; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct input_polled_dev *poll_dev; + u32 poll_interval; + int i, err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->syscon = + syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1"); + if (IS_ERR(priv->syscon)) + return PTR_ERR(priv->syscon); + + priv->row_count = of_gpio_named_count(np, "row-gpios"); + if (priv->row_count < 1) + return -EINVAL; + + priv->gpio_data = devm_kcalloc(dev, + priv->row_count, sizeof(*priv->gpio_data), + GFP_KERNEL); + if (!priv->gpio_data) + return -ENOMEM; + + priv->row_shift = get_count_order(CLPS711X_KEYPAD_COL_COUNT); + + for (i = 0; i < priv->row_count; i++) { + struct clps711x_gpio_data *data = &priv->gpio_data[i]; + + data->desc = devm_gpiod_get_index(dev, "row", i, GPIOD_IN); + if (IS_ERR(data->desc)) + return PTR_ERR(data->desc); + } + + err = of_property_read_u32(np, "poll-interval", &poll_interval); + if (err) + return err; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) + return -ENOMEM; + + poll_dev->private = priv; + poll_dev->poll = clps711x_keypad_poll; + poll_dev->poll_interval = poll_interval; + poll_dev->input->name = pdev->name; + poll_dev->input->dev.parent = dev; + poll_dev->input->id.bustype = BUS_HOST; + poll_dev->input->id.vendor = 0x0001; + poll_dev->input->id.product = 0x0001; + poll_dev->input->id.version = 0x0100; + + err = matrix_keypad_build_keymap(NULL, NULL, priv->row_count, + CLPS711X_KEYPAD_COL_COUNT, + NULL, poll_dev->input); + if (err) + goto out_err; + + input_set_capability(poll_dev->input, EV_MSC, MSC_SCAN); + if (of_property_read_bool(np, "autorepeat")) + __set_bit(EV_REP, poll_dev->input->evbit); + + platform_set_drvdata(pdev, poll_dev); + + /* Set all columns to low */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, SYSCON1_KBDSCAN_MASK, + SYSCON1_KBDSCAN(1)); + + err = input_register_polled_device(poll_dev); + if (err) + goto out_err; + + return 0; + +out_err: + input_free_polled_device(poll_dev); + return err; +} + +static int clps711x_keypad_remove(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev = platform_get_drvdata(pdev); + + input_unregister_polled_device(poll_dev); + input_free_polled_device(poll_dev); + + return 0; +} + +static const struct of_device_id clps711x_keypad_of_match[] = { + { .compatible = "cirrus,ep7209-keypad", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match); + +static struct platform_driver clps711x_keypad_driver = { + .driver = { + .name = "clps711x-keypad", + .of_match_table = clps711x_keypad_of_match, + }, + .probe = clps711x_keypad_probe, + .remove = clps711x_keypad_remove, +}; +module_platform_driver(clps711x_keypad_driver); + +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("Cirrus Logic CLPS711X Keypad driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c new file mode 100644 index 000000000..1edf0e832 --- /dev/null +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -0,0 +1,669 @@ +// SPDX-License-Identifier: GPL-2.0 +// ChromeOS EC keyboard driver +// +// Copyright (C) 2012 Google, Inc. +// +// This driver uses the ChromeOS EC byte-level message-based protocol for +// communicating the keyboard state (which keys are pressed) from a keyboard EC +// to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing, +// but everything else (including deghosting) is done here. The main +// motivation for this is to keep the EC firmware as simple as possible, since +// it cannot be easily upgraded and EC flash/IRAM space is relatively +// expensive. + +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/notifier.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/sysrq.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> + +#include <asm/unaligned.h> + +/* + * @rows: Number of rows in the keypad + * @cols: Number of columns in the keypad + * @row_shift: log2 or number of rows, rounded up + * @keymap_data: Matrix keymap data used to convert to keyscan values + * @ghost_filter: true to enable the matrix key-ghosting filter + * @valid_keys: bitmap of existing keys for each matrix column + * @old_kb_state: bitmap of keys pressed last scan + * @dev: Device pointer + * @ec: Top level ChromeOS device to use to talk to EC + * @idev: The input device for the matrix keys. + * @bs_idev: The input device for non-matrix buttons and switches (or NULL). + * @notifier: interrupt event notifier for transport devices + */ +struct cros_ec_keyb { + unsigned int rows; + unsigned int cols; + int row_shift; + const struct matrix_keymap_data *keymap_data; + bool ghost_filter; + uint8_t *valid_keys; + uint8_t *old_kb_state; + + struct device *dev; + struct cros_ec_device *ec; + + struct input_dev *idev; + struct input_dev *bs_idev; + struct notifier_block notifier; +}; + + +/** + * cros_ec_bs_map - Struct mapping Linux keycodes to EC button/switch bitmap + * #defines + * + * @ev_type: The type of the input event to generate (e.g., EV_KEY). + * @code: A linux keycode + * @bit: A #define like EC_MKBP_POWER_BUTTON or EC_MKBP_LID_OPEN + * @inverted: If the #define and EV_SW have opposite meanings, this is true. + * Only applicable to switches. + */ +struct cros_ec_bs_map { + unsigned int ev_type; + unsigned int code; + u8 bit; + bool inverted; +}; + +/* cros_ec_keyb_bs - Map EC button/switch #defines into kernel ones */ +static const struct cros_ec_bs_map cros_ec_keyb_bs[] = { + /* Buttons */ + { + .ev_type = EV_KEY, + .code = KEY_POWER, + .bit = EC_MKBP_POWER_BUTTON, + }, + { + .ev_type = EV_KEY, + .code = KEY_VOLUMEUP, + .bit = EC_MKBP_VOL_UP, + }, + { + .ev_type = EV_KEY, + .code = KEY_VOLUMEDOWN, + .bit = EC_MKBP_VOL_DOWN, + }, + + /* Switches */ + { + .ev_type = EV_SW, + .code = SW_LID, + .bit = EC_MKBP_LID_OPEN, + .inverted = true, + }, + { + .ev_type = EV_SW, + .code = SW_TABLET_MODE, + .bit = EC_MKBP_TABLET_MODE, + }, +}; + +/* + * Returns true when there is at least one combination of pressed keys that + * results in ghosting. + */ +static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf) +{ + int col1, col2, buf1, buf2; + struct device *dev = ckdev->dev; + uint8_t *valid_keys = ckdev->valid_keys; + + /* + * Ghosting happens if for any pressed key X there are other keys + * pressed both in the same row and column of X as, for instance, + * in the following diagram: + * + * . . Y . g . + * . . . . . . + * . . . . . . + * . . X . Z . + * + * In this case only X, Y, and Z are pressed, but g appears to be + * pressed too (see Wikipedia). + */ + for (col1 = 0; col1 < ckdev->cols; col1++) { + buf1 = buf[col1] & valid_keys[col1]; + for (col2 = col1 + 1; col2 < ckdev->cols; col2++) { + buf2 = buf[col2] & valid_keys[col2]; + if (hweight8(buf1 & buf2) > 1) { + dev_dbg(dev, "ghost found at: B[%02d]:0x%02x & B[%02d]:0x%02x", + col1, buf1, col2, buf2); + return true; + } + } + } + + return false; +} + + +/* + * Compares the new keyboard state to the old one and produces key + * press/release events accordingly. The keyboard state is 13 bytes (one byte + * per column) + */ +static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev, + uint8_t *kb_state, int len) +{ + struct input_dev *idev = ckdev->idev; + int col, row; + int new_state; + int old_state; + + if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) { + /* + * Simple-minded solution: ignore this state. The obvious + * improvement is to only ignore changes to keys involved in + * the ghosting, but process the other changes. + */ + dev_dbg(ckdev->dev, "ghosting found\n"); + return; + } + + for (col = 0; col < ckdev->cols; col++) { + for (row = 0; row < ckdev->rows; row++) { + int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift); + const unsigned short *keycodes = idev->keycode; + + new_state = kb_state[col] & (1 << row); + old_state = ckdev->old_kb_state[col] & (1 << row); + if (new_state != old_state) { + dev_dbg(ckdev->dev, + "changed: [r%d c%d]: byte %02x\n", + row, col, new_state); + + input_event(idev, EV_MSC, MSC_SCAN, pos); + input_report_key(idev, keycodes[pos], + new_state); + } + } + ckdev->old_kb_state[col] = kb_state[col]; + } + input_sync(ckdev->idev); +} + +/** + * cros_ec_keyb_report_bs - Report non-matrixed buttons or switches + * + * This takes a bitmap of buttons or switches from the EC and reports events, + * syncing at the end. + * + * @ckdev: The keyboard device. + * @ev_type: The input event type (e.g., EV_KEY). + * @mask: A bitmap of buttons from the EC. + */ +static void cros_ec_keyb_report_bs(struct cros_ec_keyb *ckdev, + unsigned int ev_type, u32 mask) + +{ + struct input_dev *idev = ckdev->bs_idev; + int i; + + for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) { + const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i]; + + if (map->ev_type != ev_type) + continue; + + input_event(idev, ev_type, map->code, + !!(mask & BIT(map->bit)) ^ map->inverted); + } + input_sync(idev); +} + +static int cros_ec_keyb_work(struct notifier_block *nb, + unsigned long queued_during_suspend, void *_notify) +{ + struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb, + notifier); + u32 val; + unsigned int ev_type; + + /* + * If not wake enabled, discard key state changes during + * suspend. Switches will be re-checked in + * cros_ec_keyb_resume() to be sure nothing is lost. + */ + if (queued_during_suspend && !device_may_wakeup(ckdev->dev)) + return NOTIFY_OK; + + switch (ckdev->ec->event_data.event_type) { + case EC_MKBP_EVENT_KEY_MATRIX: + pm_wakeup_event(ckdev->dev, 0); + + if (ckdev->ec->event_size != ckdev->cols) { + dev_err(ckdev->dev, + "Discarded incomplete key matrix event.\n"); + return NOTIFY_OK; + } + + cros_ec_keyb_process(ckdev, + ckdev->ec->event_data.data.key_matrix, + ckdev->ec->event_size); + break; + + case EC_MKBP_EVENT_SYSRQ: + pm_wakeup_event(ckdev->dev, 0); + + val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq); + dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val); + handle_sysrq(val); + break; + + case EC_MKBP_EVENT_BUTTON: + case EC_MKBP_EVENT_SWITCH: + pm_wakeup_event(ckdev->dev, 0); + + if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) { + val = get_unaligned_le32( + &ckdev->ec->event_data.data.buttons); + ev_type = EV_KEY; + } else { + val = get_unaligned_le32( + &ckdev->ec->event_data.data.switches); + ev_type = EV_SW; + } + cros_ec_keyb_report_bs(ckdev, ev_type, val); + break; + + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +/* + * Walks keycodes flipping bit in buffer COLUMNS deep where bit is ROW. Used by + * ghosting logic to ignore NULL or virtual keys. + */ +static void cros_ec_keyb_compute_valid_keys(struct cros_ec_keyb *ckdev) +{ + int row, col; + int row_shift = ckdev->row_shift; + unsigned short *keymap = ckdev->idev->keycode; + unsigned short code; + + BUG_ON(ckdev->idev->keycodesize != sizeof(*keymap)); + + for (col = 0; col < ckdev->cols; col++) { + for (row = 0; row < ckdev->rows; row++) { + code = keymap[MATRIX_SCAN_CODE(row, col, row_shift)]; + if (code && (code != KEY_BATTERY)) + ckdev->valid_keys[col] |= 1 << row; + } + dev_dbg(ckdev->dev, "valid_keys[%02d] = 0x%02x\n", + col, ckdev->valid_keys[col]); + } +} + +/** + * cros_ec_keyb_info - Wrap the EC command EC_CMD_MKBP_INFO + * + * This wraps the EC_CMD_MKBP_INFO, abstracting out all of the marshalling and + * unmarshalling and different version nonsense into something simple. + * + * @ec_dev: The EC device + * @info_type: Either EC_MKBP_INFO_SUPPORTED or EC_MKBP_INFO_CURRENT. + * @event_type: Either EC_MKBP_EVENT_BUTTON or EC_MKBP_EVENT_SWITCH. Actually + * in some cases this could be EC_MKBP_EVENT_KEY_MATRIX or + * EC_MKBP_EVENT_HOST_EVENT too but we don't use in this driver. + * @result: Where we'll store the result; a union + * @result_size: The size of the result. Expected to be the size of one of + * the elements in the union. + * + * Returns 0 if no error or -error upon error. + */ +static int cros_ec_keyb_info(struct cros_ec_device *ec_dev, + enum ec_mkbp_info_type info_type, + enum ec_mkbp_event event_type, + union ec_response_get_next_data *result, + size_t result_size) +{ + struct ec_params_mkbp_info *params; + struct cros_ec_command *msg; + int ret; + + msg = kzalloc(sizeof(*msg) + max_t(size_t, result_size, + sizeof(*params)), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->command = EC_CMD_MKBP_INFO; + msg->version = 1; + msg->outsize = sizeof(*params); + msg->insize = result_size; + params = (struct ec_params_mkbp_info *)msg->data; + params->info_type = info_type; + params->event_type = event_type; + + ret = cros_ec_cmd_xfer(ec_dev, msg); + if (ret < 0) { + dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n", + (int)info_type, (int)event_type, ret); + } else if (msg->result == EC_RES_INVALID_VERSION) { + /* With older ECs we just return 0 for everything */ + memset(result, 0, result_size); + ret = 0; + } else if (msg->result != EC_RES_SUCCESS) { + dev_warn(ec_dev->dev, "Error getting info %d/%d: %d\n", + (int)info_type, (int)event_type, msg->result); + ret = -EPROTO; + } else if (ret != result_size) { + dev_warn(ec_dev->dev, "Wrong size %d/%d: %d != %zu\n", + (int)info_type, (int)event_type, + ret, result_size); + ret = -EPROTO; + } else { + memcpy(result, msg->data, result_size); + ret = 0; + } + + kfree(msg); + + return ret; +} + +/** + * cros_ec_keyb_query_switches - Query the state of switches and report + * + * This will ask the EC about the current state of switches and report to the + * kernel. Note that we don't query for buttons because they are more + * transitory and we'll get an update on the next release / press. + * + * @ckdev: The keyboard device + * + * Returns 0 if no error or -error upon error. + */ +static int cros_ec_keyb_query_switches(struct cros_ec_keyb *ckdev) +{ + struct cros_ec_device *ec_dev = ckdev->ec; + union ec_response_get_next_data event_data = {}; + int ret; + + ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_CURRENT, + EC_MKBP_EVENT_SWITCH, &event_data, + sizeof(event_data.switches)); + if (ret) + return ret; + + cros_ec_keyb_report_bs(ckdev, EV_SW, + get_unaligned_le32(&event_data.switches)); + + return 0; +} + +/** + * cros_ec_keyb_resume - Resume the keyboard + * + * We use the resume notification as a chance to query the EC for switches. + * + * @dev: The keyboard device + * + * Returns 0 if no error or -error upon error. + */ +static __maybe_unused int cros_ec_keyb_resume(struct device *dev) +{ + struct cros_ec_keyb *ckdev = dev_get_drvdata(dev); + + if (ckdev->bs_idev) + return cros_ec_keyb_query_switches(ckdev); + + return 0; +} + +/** + * cros_ec_keyb_register_bs - Register non-matrix buttons/switches + * + * Handles all the bits of the keyboard driver related to non-matrix buttons + * and switches, including asking the EC about which are present and telling + * the kernel to expect them. + * + * If this device has no support for buttons and switches we'll return no error + * but the ckdev->bs_idev will remain NULL when this function exits. + * + * @ckdev: The keyboard device + * + * Returns 0 if no error or -error upon error. + */ +static int cros_ec_keyb_register_bs(struct cros_ec_keyb *ckdev) +{ + struct cros_ec_device *ec_dev = ckdev->ec; + struct device *dev = ckdev->dev; + struct input_dev *idev; + union ec_response_get_next_data event_data = {}; + const char *phys; + u32 buttons; + u32 switches; + int ret; + int i; + + ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_SUPPORTED, + EC_MKBP_EVENT_BUTTON, &event_data, + sizeof(event_data.buttons)); + if (ret) + return ret; + buttons = get_unaligned_le32(&event_data.buttons); + + ret = cros_ec_keyb_info(ec_dev, EC_MKBP_INFO_SUPPORTED, + EC_MKBP_EVENT_SWITCH, &event_data, + sizeof(event_data.switches)); + if (ret) + return ret; + switches = get_unaligned_le32(&event_data.switches); + + if (!buttons && !switches) + return 0; + + /* + * We call the non-matrix buttons/switches 'input1', if present. + * Allocate phys before input dev, to ensure correct tear-down + * ordering. + */ + phys = devm_kasprintf(dev, GFP_KERNEL, "%s/input1", ec_dev->phys_name); + if (!phys) + return -ENOMEM; + + idev = devm_input_allocate_device(dev); + if (!idev) + return -ENOMEM; + + idev->name = "cros_ec_buttons"; + idev->phys = phys; + __set_bit(EV_REP, idev->evbit); + + idev->id.bustype = BUS_VIRTUAL; + idev->id.version = 1; + idev->id.product = 0; + idev->dev.parent = dev; + + input_set_drvdata(idev, ckdev); + ckdev->bs_idev = idev; + + for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) { + const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i]; + + if ((map->ev_type == EV_KEY && (buttons & BIT(map->bit))) || + (map->ev_type == EV_SW && (switches & BIT(map->bit)))) + input_set_capability(idev, map->ev_type, map->code); + } + + ret = cros_ec_keyb_query_switches(ckdev); + if (ret) { + dev_err(dev, "cannot query switches\n"); + return ret; + } + + ret = input_register_device(ckdev->bs_idev); + if (ret) { + dev_err(dev, "cannot register input device\n"); + return ret; + } + + return 0; +} + +/** + * cros_ec_keyb_register_bs - Register matrix keys + * + * Handles all the bits of the keyboard driver related to matrix keys. + * + * @ckdev: The keyboard device + * + * Returns 0 if no error or -error upon error. + */ +static int cros_ec_keyb_register_matrix(struct cros_ec_keyb *ckdev) +{ + struct cros_ec_device *ec_dev = ckdev->ec; + struct device *dev = ckdev->dev; + struct input_dev *idev; + const char *phys; + int err; + + err = matrix_keypad_parse_properties(dev, &ckdev->rows, &ckdev->cols); + if (err) + return err; + + ckdev->valid_keys = devm_kzalloc(dev, ckdev->cols, GFP_KERNEL); + if (!ckdev->valid_keys) + return -ENOMEM; + + ckdev->old_kb_state = devm_kzalloc(dev, ckdev->cols, GFP_KERNEL); + if (!ckdev->old_kb_state) + return -ENOMEM; + + /* + * We call the keyboard matrix 'input0'. Allocate phys before input + * dev, to ensure correct tear-down ordering. + */ + phys = devm_kasprintf(dev, GFP_KERNEL, "%s/input0", ec_dev->phys_name); + if (!phys) + return -ENOMEM; + + idev = devm_input_allocate_device(dev); + if (!idev) + return -ENOMEM; + + idev->name = CROS_EC_DEV_NAME; + idev->phys = phys; + __set_bit(EV_REP, idev->evbit); + + idev->id.bustype = BUS_VIRTUAL; + idev->id.version = 1; + idev->id.product = 0; + idev->dev.parent = dev; + + ckdev->ghost_filter = of_property_read_bool(dev->of_node, + "google,needs-ghost-filter"); + + err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols, + NULL, idev); + if (err) { + dev_err(dev, "cannot build key matrix\n"); + return err; + } + + ckdev->row_shift = get_count_order(ckdev->cols); + + input_set_capability(idev, EV_MSC, MSC_SCAN); + input_set_drvdata(idev, ckdev); + ckdev->idev = idev; + cros_ec_keyb_compute_valid_keys(ckdev); + + err = input_register_device(ckdev->idev); + if (err) { + dev_err(dev, "cannot register input device\n"); + return err; + } + + return 0; +} + +static int cros_ec_keyb_probe(struct platform_device *pdev) +{ + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct cros_ec_keyb *ckdev; + int err; + + if (!dev->of_node) + return -ENODEV; + + ckdev = devm_kzalloc(dev, sizeof(*ckdev), GFP_KERNEL); + if (!ckdev) + return -ENOMEM; + + ckdev->ec = ec; + ckdev->dev = dev; + dev_set_drvdata(dev, ckdev); + + err = cros_ec_keyb_register_matrix(ckdev); + if (err) { + dev_err(dev, "cannot register matrix inputs: %d\n", err); + return err; + } + + err = cros_ec_keyb_register_bs(ckdev); + if (err) { + dev_err(dev, "cannot register non-matrix inputs: %d\n", err); + return err; + } + + ckdev->notifier.notifier_call = cros_ec_keyb_work; + err = blocking_notifier_chain_register(&ckdev->ec->event_notifier, + &ckdev->notifier); + if (err) { + dev_err(dev, "cannot register notifier: %d\n", err); + return err; + } + + device_init_wakeup(ckdev->dev, true); + return 0; +} + +static int cros_ec_keyb_remove(struct platform_device *pdev) +{ + struct cros_ec_keyb *ckdev = dev_get_drvdata(&pdev->dev); + + blocking_notifier_chain_unregister(&ckdev->ec->event_notifier, + &ckdev->notifier); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id cros_ec_keyb_of_match[] = { + { .compatible = "google,cros-ec-keyb" }, + {}, +}; +MODULE_DEVICE_TABLE(of, cros_ec_keyb_of_match); +#endif + +static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); + +static struct platform_driver cros_ec_keyb_driver = { + .probe = cros_ec_keyb_probe, + .remove = cros_ec_keyb_remove, + .driver = { + .name = "cros-ec-keyb", + .of_match_table = of_match_ptr(cros_ec_keyb_of_match), + .pm = &cros_ec_keyb_pm_ops, + }, +}; + +module_platform_driver(cros_ec_keyb_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ChromeOS EC keyboard driver"); +MODULE_ALIAS("platform:cros-ec-keyb"); diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c new file mode 100644 index 000000000..b20a5d044 --- /dev/null +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -0,0 +1,333 @@ +/* + * DaVinci Key Scan Driver for TI platforms + * + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * Initial Code: Sandeep Paulraj <s-paulraj@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <linux/platform_data/keyscan-davinci.h> + +/* Key scan registers */ +#define DAVINCI_KEYSCAN_KEYCTRL 0x0000 +#define DAVINCI_KEYSCAN_INTENA 0x0004 +#define DAVINCI_KEYSCAN_INTFLAG 0x0008 +#define DAVINCI_KEYSCAN_INTCLR 0x000c +#define DAVINCI_KEYSCAN_STRBWIDTH 0x0010 +#define DAVINCI_KEYSCAN_INTERVAL 0x0014 +#define DAVINCI_KEYSCAN_CONTTIME 0x0018 +#define DAVINCI_KEYSCAN_CURRENTST 0x001c +#define DAVINCI_KEYSCAN_PREVSTATE 0x0020 +#define DAVINCI_KEYSCAN_EMUCTRL 0x0024 +#define DAVINCI_KEYSCAN_IODFTCTRL 0x002c + +/* Key Control Register (KEYCTRL) */ +#define DAVINCI_KEYSCAN_KEYEN 0x00000001 +#define DAVINCI_KEYSCAN_PREVMODE 0x00000002 +#define DAVINCI_KEYSCAN_CHATOFF 0x00000004 +#define DAVINCI_KEYSCAN_AUTODET 0x00000008 +#define DAVINCI_KEYSCAN_SCANMODE 0x00000010 +#define DAVINCI_KEYSCAN_OUTTYPE 0x00000020 + +/* Masks for the interrupts */ +#define DAVINCI_KEYSCAN_INT_CONT 0x00000008 +#define DAVINCI_KEYSCAN_INT_OFF 0x00000004 +#define DAVINCI_KEYSCAN_INT_ON 0x00000002 +#define DAVINCI_KEYSCAN_INT_CHANGE 0x00000001 +#define DAVINCI_KEYSCAN_INT_ALL 0x0000000f + +struct davinci_ks { + struct input_dev *input; + struct davinci_ks_platform_data *pdata; + int irq; + void __iomem *base; + resource_size_t pbase; + size_t base_size; + unsigned short keymap[]; +}; + +/* Initializing the kp Module */ +static int __init davinci_ks_initialize(struct davinci_ks *davinci_ks) +{ + struct device *dev = &davinci_ks->input->dev; + struct davinci_ks_platform_data *pdata = davinci_ks->pdata; + u32 matrix_ctrl; + + /* Enable all interrupts */ + __raw_writel(DAVINCI_KEYSCAN_INT_ALL, + davinci_ks->base + DAVINCI_KEYSCAN_INTENA); + + /* Clear interrupts if any */ + __raw_writel(DAVINCI_KEYSCAN_INT_ALL, + davinci_ks->base + DAVINCI_KEYSCAN_INTCLR); + + /* Setup the scan period = strobe + interval */ + __raw_writel(pdata->strobe, + davinci_ks->base + DAVINCI_KEYSCAN_STRBWIDTH); + __raw_writel(pdata->interval, + davinci_ks->base + DAVINCI_KEYSCAN_INTERVAL); + __raw_writel(0x01, + davinci_ks->base + DAVINCI_KEYSCAN_CONTTIME); + + /* Define matrix type */ + switch (pdata->matrix_type) { + case DAVINCI_KEYSCAN_MATRIX_4X4: + matrix_ctrl = 0; + break; + case DAVINCI_KEYSCAN_MATRIX_5X3: + matrix_ctrl = (1 << 6); + break; + default: + dev_err(dev->parent, "wrong matrix type\n"); + return -EINVAL; + } + + /* Enable key scan module and set matrix type */ + __raw_writel(DAVINCI_KEYSCAN_AUTODET | DAVINCI_KEYSCAN_KEYEN | + matrix_ctrl, davinci_ks->base + DAVINCI_KEYSCAN_KEYCTRL); + + return 0; +} + +static irqreturn_t davinci_ks_interrupt(int irq, void *dev_id) +{ + struct davinci_ks *davinci_ks = dev_id; + struct device *dev = &davinci_ks->input->dev; + unsigned short *keymap = davinci_ks->keymap; + int keymapsize = davinci_ks->pdata->keymapsize; + u32 prev_status, new_status, changed; + bool release; + int keycode = KEY_UNKNOWN; + int i; + + /* Disable interrupt */ + __raw_writel(0x0, davinci_ks->base + DAVINCI_KEYSCAN_INTENA); + + /* Reading previous and new status of the key scan */ + prev_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_PREVSTATE); + new_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_CURRENTST); + + changed = prev_status ^ new_status; + + if (changed) { + /* + * It goes through all bits in 'changed' to ensure + * that no key changes are being missed + */ + for (i = 0 ; i < keymapsize; i++) { + if ((changed>>i) & 0x1) { + keycode = keymap[i]; + release = (new_status >> i) & 0x1; + dev_dbg(dev->parent, "key %d %s\n", keycode, + release ? "released" : "pressed"); + input_report_key(davinci_ks->input, keycode, + !release); + input_sync(davinci_ks->input); + } + } + /* Clearing interrupt */ + __raw_writel(DAVINCI_KEYSCAN_INT_ALL, + davinci_ks->base + DAVINCI_KEYSCAN_INTCLR); + } + + /* Enable interrupts */ + __raw_writel(0x1, davinci_ks->base + DAVINCI_KEYSCAN_INTENA); + + return IRQ_HANDLED; +} + +static int __init davinci_ks_probe(struct platform_device *pdev) +{ + struct davinci_ks *davinci_ks; + struct input_dev *key_dev; + struct resource *res, *mem; + struct device *dev = &pdev->dev; + struct davinci_ks_platform_data *pdata = dev_get_platdata(dev); + int error, i; + + if (pdata->device_enable) { + error = pdata->device_enable(dev); + if (error < 0) { + dev_dbg(dev, "device enable function failed\n"); + return error; + } + } + + if (!pdata->keymap) { + dev_dbg(dev, "no keymap from pdata\n"); + return -EINVAL; + } + + davinci_ks = kzalloc(sizeof(struct davinci_ks) + + sizeof(unsigned short) * pdata->keymapsize, GFP_KERNEL); + if (!davinci_ks) { + dev_dbg(dev, "could not allocate memory for private data\n"); + return -ENOMEM; + } + + memcpy(davinci_ks->keymap, pdata->keymap, + sizeof(unsigned short) * pdata->keymapsize); + + key_dev = input_allocate_device(); + if (!key_dev) { + dev_dbg(dev, "could not allocate input device\n"); + error = -ENOMEM; + goto fail1; + } + + davinci_ks->input = key_dev; + + davinci_ks->irq = platform_get_irq(pdev, 0); + if (davinci_ks->irq < 0) { + dev_err(dev, "no key scan irq\n"); + error = davinci_ks->irq; + goto fail2; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no mem resource\n"); + error = -EINVAL; + goto fail2; + } + + davinci_ks->pbase = res->start; + davinci_ks->base_size = resource_size(res); + + mem = request_mem_region(davinci_ks->pbase, davinci_ks->base_size, + pdev->name); + if (!mem) { + dev_err(dev, "key scan registers at %08x are not free\n", + davinci_ks->pbase); + error = -EBUSY; + goto fail2; + } + + davinci_ks->base = ioremap(davinci_ks->pbase, davinci_ks->base_size); + if (!davinci_ks->base) { + dev_err(dev, "can't ioremap MEM resource.\n"); + error = -ENOMEM; + goto fail3; + } + + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, key_dev->evbit); + + /* Setup input device */ + __set_bit(EV_KEY, key_dev->evbit); + + /* Setup the platform data */ + davinci_ks->pdata = pdata; + + for (i = 0; i < davinci_ks->pdata->keymapsize; i++) + __set_bit(davinci_ks->pdata->keymap[i], key_dev->keybit); + + key_dev->name = "davinci_keyscan"; + key_dev->phys = "davinci_keyscan/input0"; + key_dev->dev.parent = dev; + key_dev->id.bustype = BUS_HOST; + key_dev->id.vendor = 0x0001; + key_dev->id.product = 0x0001; + key_dev->id.version = 0x0001; + key_dev->keycode = davinci_ks->keymap; + key_dev->keycodesize = sizeof(davinci_ks->keymap[0]); + key_dev->keycodemax = davinci_ks->pdata->keymapsize; + + error = input_register_device(davinci_ks->input); + if (error < 0) { + dev_err(dev, "unable to register davinci key scan device\n"); + goto fail4; + } + + error = request_irq(davinci_ks->irq, davinci_ks_interrupt, + 0, pdev->name, davinci_ks); + if (error < 0) { + dev_err(dev, "unable to register davinci key scan interrupt\n"); + goto fail5; + } + + error = davinci_ks_initialize(davinci_ks); + if (error < 0) { + dev_err(dev, "unable to initialize davinci key scan device\n"); + goto fail6; + } + + platform_set_drvdata(pdev, davinci_ks); + return 0; + +fail6: + free_irq(davinci_ks->irq, davinci_ks); +fail5: + input_unregister_device(davinci_ks->input); + key_dev = NULL; +fail4: + iounmap(davinci_ks->base); +fail3: + release_mem_region(davinci_ks->pbase, davinci_ks->base_size); +fail2: + input_free_device(key_dev); +fail1: + kfree(davinci_ks); + + return error; +} + +static int davinci_ks_remove(struct platform_device *pdev) +{ + struct davinci_ks *davinci_ks = platform_get_drvdata(pdev); + + free_irq(davinci_ks->irq, davinci_ks); + + input_unregister_device(davinci_ks->input); + + iounmap(davinci_ks->base); + release_mem_region(davinci_ks->pbase, davinci_ks->base_size); + + kfree(davinci_ks); + + return 0; +} + +static struct platform_driver davinci_ks_driver = { + .driver = { + .name = "davinci_keyscan", + }, + .remove = davinci_ks_remove, +}; + +module_platform_driver_probe(davinci_ks_driver, davinci_ks_probe); + +MODULE_AUTHOR("Miguel Aguilar"); +MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c new file mode 100644 index 000000000..6fe4062e3 --- /dev/null +++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c @@ -0,0 +1,155 @@ +/* + * D-Link DIR-685 router I2C-based Touchkeys input driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This is a one-off touchkey controller based on the Cypress Semiconductor + * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit + * board inside the router is named E119921 + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +struct dir685_touchkeys { + struct device *dev; + struct i2c_client *client; + struct input_dev *input; + unsigned long cur_key; + u16 codes[7]; +}; + +static irqreturn_t dir685_tk_irq_thread(int irq, void *data) +{ + struct dir685_touchkeys *tk = data; + const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16); + unsigned long changed; + u8 buf[6]; + unsigned long key; + int i; + int err; + + memset(buf, 0, sizeof(buf)); + err = i2c_master_recv(tk->client, buf, sizeof(buf)); + if (err != sizeof(buf)) { + dev_err(tk->dev, "short read %d\n", err); + return IRQ_HANDLED; + } + + dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf); + key = be16_to_cpup((__be16 *) &buf[4]); + + /* Figure out if any bits went high or low since last message */ + changed = tk->cur_key ^ key; + for_each_set_bit(i, &changed, num_bits) { + dev_dbg(tk->dev, "key %d is %s\n", i, + test_bit(i, &key) ? "down" : "up"); + input_report_key(tk->input, tk->codes[i], test_bit(i, &key)); + } + + /* Store currently down keys */ + tk->cur_key = key; + input_sync(tk->input); + + return IRQ_HANDLED; +} + +static int dir685_tk_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct dir685_touchkeys *tk; + struct device *dev = &client->dev; + u8 bl_data[] = { 0xa7, 0x40 }; + int err; + int i; + + tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL); + if (!tk) + return -ENOMEM; + + tk->input = devm_input_allocate_device(dev); + if (!tk->input) + return -ENOMEM; + + tk->client = client; + tk->dev = dev; + + tk->input->keycodesize = sizeof(u16); + tk->input->keycodemax = ARRAY_SIZE(tk->codes); + tk->input->keycode = tk->codes; + tk->codes[0] = KEY_UP; + tk->codes[1] = KEY_DOWN; + tk->codes[2] = KEY_LEFT; + tk->codes[3] = KEY_RIGHT; + tk->codes[4] = KEY_ENTER; + tk->codes[5] = KEY_WPS_BUTTON; + /* + * This key appears in the vendor driver, but I have + * not been able to activate it. + */ + tk->codes[6] = KEY_RESERVED; + + __set_bit(EV_KEY, tk->input->evbit); + for (i = 0; i < ARRAY_SIZE(tk->codes); i++) + __set_bit(tk->codes[i], tk->input->keybit); + __clear_bit(KEY_RESERVED, tk->input->keybit); + + tk->input->name = "D-Link DIR-685 touchkeys"; + tk->input->id.bustype = BUS_I2C; + + err = input_register_device(tk->input); + if (err) + return err; + + /* Set the brightness to max level */ + err = i2c_master_send(client, bl_data, sizeof(bl_data)); + if (err != sizeof(bl_data)) + dev_warn(tk->dev, "error setting brightness level\n"); + + if (!client->irq) { + dev_err(dev, "no IRQ on the I2C device\n"); + return -ENODEV; + } + err = devm_request_threaded_irq(dev, client->irq, + NULL, dir685_tk_irq_thread, + IRQF_ONESHOT, + "dir685-tk", tk); + if (err) { + dev_err(dev, "can't request IRQ\n"); + return err; + } + + return 0; +} + +static const struct i2c_device_id dir685_tk_id[] = { + { "dir685tk", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dir685_tk_id); + +#ifdef CONFIG_OF +static const struct of_device_id dir685_tk_of_match[] = { + { .compatible = "dlink,dir685-touchkeys" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dir685_tk_of_match); +#endif + +static struct i2c_driver dir685_tk_i2c_driver = { + .driver = { + .name = "dlink-dir685-touchkeys", + .of_match_table = of_match_ptr(dir685_tk_of_match), + }, + .probe = dir685_tk_probe, + .id_table = dir685_tk_id, +}; +module_i2c_driver(dir685_tk_i2c_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c new file mode 100644 index 000000000..01788a780 --- /dev/null +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -0,0 +1,386 @@ +/* + * Driver for the Cirrus EP93xx matrix keypad controller. + * + * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * Based on the pxa27x matrix keypad controller by Rodolfo Giometti. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE: + * + * The 3-key reset is triggered by pressing the 3 keys in + * Row 0, Columns 2, 4, and 7 at the same time. This action can + * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag. + * + * Normal operation for the matrix does not autorepeat the key press. + * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT + * flag. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/input/matrix_keypad.h> +#include <linux/slab.h> + +#include <mach/hardware.h> +#include <linux/platform_data/keypad-ep93xx.h> + +/* + * Keypad Interface Register offsets + */ +#define KEY_INIT 0x00 /* Key Scan Initialization register */ +#define KEY_DIAG 0x04 /* Key Scan Diagnostic register */ +#define KEY_REG 0x08 /* Key Value Capture register */ + +/* Key Scan Initialization Register bit defines */ +#define KEY_INIT_DBNC_MASK (0x00ff0000) +#define KEY_INIT_DBNC_SHIFT (16) +#define KEY_INIT_DIS3KY (1<<15) +#define KEY_INIT_DIAG (1<<14) +#define KEY_INIT_BACK (1<<13) +#define KEY_INIT_T2 (1<<12) +#define KEY_INIT_PRSCL_MASK (0x000003ff) +#define KEY_INIT_PRSCL_SHIFT (0) + +/* Key Scan Diagnostic Register bit defines */ +#define KEY_DIAG_MASK (0x0000003f) +#define KEY_DIAG_SHIFT (0) + +/* Key Value Capture Register bit defines */ +#define KEY_REG_K (1<<15) +#define KEY_REG_INT (1<<14) +#define KEY_REG_2KEYS (1<<13) +#define KEY_REG_1KEY (1<<12) +#define KEY_REG_KEY2_MASK (0x00000fc0) +#define KEY_REG_KEY2_SHIFT (6) +#define KEY_REG_KEY1_MASK (0x0000003f) +#define KEY_REG_KEY1_SHIFT (0) + +#define EP93XX_MATRIX_SIZE (EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS) + +struct ep93xx_keypad { + struct ep93xx_keypad_platform_data *pdata; + struct input_dev *input_dev; + struct clk *clk; + + void __iomem *mmio_base; + + unsigned short keycodes[EP93XX_MATRIX_SIZE]; + + int key1; + int key2; + + int irq; + + bool enabled; +}; + +static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id) +{ + struct ep93xx_keypad *keypad = dev_id; + struct input_dev *input_dev = keypad->input_dev; + unsigned int status; + int keycode, key1, key2; + + status = __raw_readl(keypad->mmio_base + KEY_REG); + + keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT; + key1 = keypad->keycodes[keycode]; + + keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT; + key2 = keypad->keycodes[keycode]; + + if (status & KEY_REG_2KEYS) { + if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1) + input_report_key(input_dev, keypad->key1, 0); + + if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2) + input_report_key(input_dev, keypad->key2, 0); + + input_report_key(input_dev, key1, 1); + input_report_key(input_dev, key2, 1); + + keypad->key1 = key1; + keypad->key2 = key2; + + } else if (status & KEY_REG_1KEY) { + if (keypad->key1 && key1 != keypad->key1) + input_report_key(input_dev, keypad->key1, 0); + + if (keypad->key2 && key1 != keypad->key2) + input_report_key(input_dev, keypad->key2, 0); + + input_report_key(input_dev, key1, 1); + + keypad->key1 = key1; + keypad->key2 = 0; + + } else { + input_report_key(input_dev, keypad->key1, 0); + input_report_key(input_dev, keypad->key2, 0); + + keypad->key1 = keypad->key2 = 0; + } + input_sync(input_dev); + + return IRQ_HANDLED; +} + +static void ep93xx_keypad_config(struct ep93xx_keypad *keypad) +{ + struct ep93xx_keypad_platform_data *pdata = keypad->pdata; + unsigned int val = 0; + + if (pdata->flags & EP93XX_KEYPAD_KDIV) + clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV4); + else + clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV16); + + if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY) + val |= KEY_INIT_DIS3KY; + if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE) + val |= KEY_INIT_DIAG; + if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE) + val |= KEY_INIT_BACK; + if (pdata->flags & EP93XX_KEYPAD_TEST_MODE) + val |= KEY_INIT_T2; + + val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK); + + val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK); + + __raw_writel(val, keypad->mmio_base + KEY_INIT); +} + +static int ep93xx_keypad_open(struct input_dev *pdev) +{ + struct ep93xx_keypad *keypad = input_get_drvdata(pdev); + + if (!keypad->enabled) { + ep93xx_keypad_config(keypad); + clk_enable(keypad->clk); + keypad->enabled = true; + } + + return 0; +} + +static void ep93xx_keypad_close(struct input_dev *pdev) +{ + struct ep93xx_keypad *keypad = input_get_drvdata(pdev); + + if (keypad->enabled) { + clk_disable(keypad->clk); + keypad->enabled = false; + } +} + + +#ifdef CONFIG_PM_SLEEP +static int ep93xx_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + if (keypad->enabled) { + clk_disable(keypad->clk); + keypad->enabled = false; + } + + mutex_unlock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(keypad->irq); + + return 0; +} + +static int ep93xx_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(keypad->irq); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + if (!keypad->enabled) { + ep93xx_keypad_config(keypad); + clk_enable(keypad->clk); + keypad->enabled = true; + } + } + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops, + ep93xx_keypad_suspend, ep93xx_keypad_resume); + +static int ep93xx_keypad_probe(struct platform_device *pdev) +{ + struct ep93xx_keypad *keypad; + const struct matrix_keymap_data *keymap_data; + struct input_dev *input_dev; + struct resource *res; + int err; + + keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + keypad->pdata = dev_get_platdata(&pdev->dev); + if (!keypad->pdata) { + err = -EINVAL; + goto failed_free; + } + + keymap_data = keypad->pdata->keymap_data; + if (!keymap_data) { + err = -EINVAL; + goto failed_free; + } + + keypad->irq = platform_get_irq(pdev, 0); + if (keypad->irq < 0) { + err = keypad->irq; + goto failed_free; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENXIO; + goto failed_free; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + err = -EBUSY; + goto failed_free; + } + + keypad->mmio_base = ioremap(res->start, resource_size(res)); + if (keypad->mmio_base == NULL) { + err = -ENXIO; + goto failed_free_mem; + } + + err = ep93xx_keypad_acquire_gpio(pdev); + if (err) + goto failed_free_io; + + keypad->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + err = PTR_ERR(keypad->clk); + goto failed_free_gpio; + } + + input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto failed_put_clk; + } + + keypad->input_dev = input_dev; + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = ep93xx_keypad_open; + input_dev->close = ep93xx_keypad_close; + input_dev->dev.parent = &pdev->dev; + + err = matrix_keypad_build_keymap(keymap_data, NULL, + EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS, + keypad->keycodes, input_dev); + if (err) + goto failed_free_dev; + + if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT) + __set_bit(EV_REP, input_dev->evbit); + input_set_drvdata(input_dev, keypad); + + err = request_irq(keypad->irq, ep93xx_keypad_irq_handler, + 0, pdev->name, keypad); + if (err) + goto failed_free_dev; + + err = input_register_device(input_dev); + if (err) + goto failed_free_irq; + + platform_set_drvdata(pdev, keypad); + device_init_wakeup(&pdev->dev, 1); + + return 0; + +failed_free_irq: + free_irq(keypad->irq, keypad); +failed_free_dev: + input_free_device(input_dev); +failed_put_clk: + clk_put(keypad->clk); +failed_free_gpio: + ep93xx_keypad_release_gpio(pdev); +failed_free_io: + iounmap(keypad->mmio_base); +failed_free_mem: + release_mem_region(res->start, resource_size(res)); +failed_free: + kfree(keypad); + return err; +} + +static int ep93xx_keypad_remove(struct platform_device *pdev) +{ + struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(keypad->irq, keypad); + + if (keypad->enabled) + clk_disable(keypad->clk); + clk_put(keypad->clk); + + input_unregister_device(keypad->input_dev); + + ep93xx_keypad_release_gpio(pdev); + + iounmap(keypad->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(keypad); + + return 0; +} + +static struct platform_driver ep93xx_keypad_driver = { + .driver = { + .name = "ep93xx-keypad", + .pm = &ep93xx_keypad_pm_ops, + }, + .probe = ep93xx_keypad_probe, + .remove = ep93xx_keypad_remove, +}; +module_platform_driver(ep93xx_keypad_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller"); +MODULE_ALIAS("platform:ep93xx-keypad"); diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c new file mode 100644 index 000000000..e8dae6195 --- /dev/null +++ b/drivers/input/keyboard/goldfish_events.c @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (C) 2012 Intel, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/acpi.h> + +enum { + REG_READ = 0x00, + REG_SET_PAGE = 0x00, + REG_LEN = 0x04, + REG_DATA = 0x08, + + PAGE_NAME = 0x00000, + PAGE_EVBITS = 0x10000, + PAGE_ABSDATA = 0x20000 | EV_ABS, +}; + +struct event_dev { + struct input_dev *input; + int irq; + void __iomem *addr; + char name[0]; +}; + +static irqreturn_t events_interrupt(int irq, void *dev_id) +{ + struct event_dev *edev = dev_id; + unsigned int type, code, value; + + type = __raw_readl(edev->addr + REG_READ); + code = __raw_readl(edev->addr + REG_READ); + value = __raw_readl(edev->addr + REG_READ); + + input_event(edev->input, type, code, value); + input_sync(edev->input); + return IRQ_HANDLED; +} + +static void events_import_bits(struct event_dev *edev, + unsigned long bits[], unsigned int type, size_t count) +{ + void __iomem *addr = edev->addr; + int i, j; + size_t size; + uint8_t val; + + __raw_writel(PAGE_EVBITS | type, addr + REG_SET_PAGE); + + size = __raw_readl(addr + REG_LEN) * 8; + if (size < count) + count = size; + + addr += REG_DATA; + for (i = 0; i < count; i += 8) { + val = __raw_readb(addr++); + for (j = 0; j < 8; j++) + if (val & 1 << j) + set_bit(i + j, bits); + } +} + +static void events_import_abs_params(struct event_dev *edev) +{ + struct input_dev *input_dev = edev->input; + void __iomem *addr = edev->addr; + u32 val[4]; + int count; + int i, j; + + __raw_writel(PAGE_ABSDATA, addr + REG_SET_PAGE); + + count = __raw_readl(addr + REG_LEN) / sizeof(val); + if (count > ABS_MAX) + count = ABS_MAX; + + for (i = 0; i < count; i++) { + if (!test_bit(i, input_dev->absbit)) + continue; + + for (j = 0; j < ARRAY_SIZE(val); j++) { + int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32); + + val[j] = __raw_readl(edev->addr + REG_DATA + offset); + } + + input_set_abs_params(input_dev, i, + val[0], val[1], val[2], val[3]); + } +} + +static int events_probe(struct platform_device *pdev) +{ + struct input_dev *input_dev; + struct event_dev *edev; + struct resource *res; + unsigned int keymapnamelen; + void __iomem *addr; + int irq; + int i; + int error; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + addr = devm_ioremap(&pdev->dev, res->start, 4096); + if (!addr) + return -ENOMEM; + + __raw_writel(PAGE_NAME, addr + REG_SET_PAGE); + keymapnamelen = __raw_readl(addr + REG_LEN); + + edev = devm_kzalloc(&pdev->dev, + sizeof(struct event_dev) + keymapnamelen + 1, + GFP_KERNEL); + if (!edev) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) + return -ENOMEM; + + edev->input = input_dev; + edev->addr = addr; + edev->irq = irq; + + for (i = 0; i < keymapnamelen; i++) + edev->name[i] = __raw_readb(edev->addr + REG_DATA + i); + + pr_debug("%s: keymap=%s\n", __func__, edev->name); + + input_dev->name = edev->name; + input_dev->id.bustype = BUS_HOST; + + events_import_bits(edev, input_dev->evbit, EV_SYN, EV_MAX); + events_import_bits(edev, input_dev->keybit, EV_KEY, KEY_MAX); + events_import_bits(edev, input_dev->relbit, EV_REL, REL_MAX); + events_import_bits(edev, input_dev->absbit, EV_ABS, ABS_MAX); + events_import_bits(edev, input_dev->mscbit, EV_MSC, MSC_MAX); + events_import_bits(edev, input_dev->ledbit, EV_LED, LED_MAX); + events_import_bits(edev, input_dev->sndbit, EV_SND, SND_MAX); + events_import_bits(edev, input_dev->ffbit, EV_FF, FF_MAX); + events_import_bits(edev, input_dev->swbit, EV_SW, SW_MAX); + + events_import_abs_params(edev); + + error = devm_request_irq(&pdev->dev, edev->irq, events_interrupt, 0, + "goldfish-events-keypad", edev); + if (error) + return error; + + error = input_register_device(input_dev); + if (error) + return error; + + return 0; +} + +static const struct of_device_id goldfish_events_of_match[] = { + { .compatible = "google,goldfish-events-keypad", }, + {}, +}; +MODULE_DEVICE_TABLE(of, goldfish_events_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id goldfish_events_acpi_match[] = { + { "GFSH0002", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, goldfish_events_acpi_match); +#endif + +static struct platform_driver events_driver = { + .probe = events_probe, + .driver = { + .name = "goldfish_events", + .of_match_table = goldfish_events_of_match, + .acpi_match_table = ACPI_PTR(goldfish_events_acpi_match), + }, +}; + +module_platform_driver(events_driver); + +MODULE_AUTHOR("Brian Swetland"); +MODULE_DESCRIPTION("Goldfish Event Device"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c new file mode 100644 index 000000000..492a971b9 --- /dev/null +++ b/drivers/input/keyboard/gpio_keys.c @@ -0,0 +1,1043 @@ +/* + * Driver for keys on GPIO lines capable of generating interrupts. + * + * Copyright 2005 Phil Blundell + * Copyright 2010, 2011 David Jander <david@protonic.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> + +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/sysctl.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/workqueue.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/spinlock.h> +#include <dt-bindings/input/gpio-keys.h> + +struct gpio_button_data { + const struct gpio_keys_button *button; + struct input_dev *input; + struct gpio_desc *gpiod; + + unsigned short *code; + + struct timer_list release_timer; + unsigned int release_delay; /* in msecs, for IRQ-only buttons */ + + struct delayed_work work; + unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */ + + unsigned int irq; + unsigned int wakeup_trigger_type; + spinlock_t lock; + bool disabled; + bool key_pressed; + bool suspended; +}; + +struct gpio_keys_drvdata { + const struct gpio_keys_platform_data *pdata; + struct input_dev *input; + struct mutex disable_lock; + unsigned short *keymap; + struct gpio_button_data data[0]; +}; + +/* + * SYSFS interface for enabling/disabling keys and switches: + * + * There are 4 attributes under /sys/devices/platform/gpio-keys/ + * keys [ro] - bitmap of keys (EV_KEY) which can be + * disabled + * switches [ro] - bitmap of switches (EV_SW) which can be + * disabled + * disabled_keys [rw] - bitmap of keys currently disabled + * disabled_switches [rw] - bitmap of switches currently disabled + * + * Userland can change these values and hence disable event generation + * for each key (or switch). Disabling a key means its interrupt line + * is disabled. + * + * For example, if we have following switches set up as gpio-keys: + * SW_DOCK = 5 + * SW_CAMERA_LENS_COVER = 9 + * SW_KEYPAD_SLIDE = 10 + * SW_FRONT_PROXIMITY = 11 + * This is read from switches: + * 11-9,5 + * Next we want to disable proximity (11) and dock (5), we write: + * 11,5 + * to file disabled_switches. Now proximity and dock IRQs are disabled. + * This can be verified by reading the file disabled_switches: + * 11,5 + * If we now want to enable proximity (11) switch we write: + * 5 + * to disabled_switches. + * + * We can disable only those keys which don't allow sharing the irq. + */ + +/** + * get_n_events_by_type() - returns maximum number of events per @type + * @type: type of button (%EV_KEY, %EV_SW) + * + * Return value of this function can be used to allocate bitmap + * large enough to hold all bits for given type. + */ +static int get_n_events_by_type(int type) +{ + BUG_ON(type != EV_SW && type != EV_KEY); + + return (type == EV_KEY) ? KEY_CNT : SW_CNT; +} + +/** + * get_bm_events_by_type() - returns bitmap of supported events per @type + * @input: input device from which bitmap is retrieved + * @type: type of button (%EV_KEY, %EV_SW) + * + * Return value of this function can be used to allocate bitmap + * large enough to hold all bits for given type. + */ +static const unsigned long *get_bm_events_by_type(struct input_dev *dev, + int type) +{ + BUG_ON(type != EV_SW && type != EV_KEY); + + return (type == EV_KEY) ? dev->keybit : dev->swbit; +} + +/** + * gpio_keys_disable_button() - disables given GPIO button + * @bdata: button data for button to be disabled + * + * Disables button pointed by @bdata. This is done by masking + * IRQ line. After this function is called, button won't generate + * input events anymore. Note that one can only disable buttons + * that don't share IRQs. + * + * Make sure that @bdata->disable_lock is locked when entering + * this function to avoid races when concurrent threads are + * disabling buttons at the same time. + */ +static void gpio_keys_disable_button(struct gpio_button_data *bdata) +{ + if (!bdata->disabled) { + /* + * Disable IRQ and associated timer/work structure. + */ + disable_irq(bdata->irq); + + if (bdata->gpiod) + cancel_delayed_work_sync(&bdata->work); + else + del_timer_sync(&bdata->release_timer); + + bdata->disabled = true; + } +} + +/** + * gpio_keys_enable_button() - enables given GPIO button + * @bdata: button data for button to be disabled + * + * Enables given button pointed by @bdata. + * + * Make sure that @bdata->disable_lock is locked when entering + * this function to avoid races with concurrent threads trying + * to enable the same button at the same time. + */ +static void gpio_keys_enable_button(struct gpio_button_data *bdata) +{ + if (bdata->disabled) { + enable_irq(bdata->irq); + bdata->disabled = false; + } +} + +/** + * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons + * @ddata: pointer to drvdata + * @buf: buffer where stringified bitmap is written + * @type: button type (%EV_KEY, %EV_SW) + * @only_disabled: does caller want only those buttons that are + * currently disabled or all buttons that can be + * disabled + * + * This function writes buttons that can be disabled to @buf. If + * @only_disabled is true, then @buf contains only those buttons + * that are currently disabled. Returns 0 on success or negative + * errno on failure. + */ +static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata, + char *buf, unsigned int type, + bool only_disabled) +{ + int n_events = get_n_events_by_type(type); + unsigned long *bits; + ssize_t ret; + int i; + + bits = bitmap_zalloc(n_events, GFP_KERNEL); + if (!bits) + return -ENOMEM; + + for (i = 0; i < ddata->pdata->nbuttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + + if (bdata->button->type != type) + continue; + + if (only_disabled && !bdata->disabled) + continue; + + __set_bit(*bdata->code, bits); + } + + ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits); + buf[ret++] = '\n'; + buf[ret] = '\0'; + + bitmap_free(bits); + + return ret; +} + +/** + * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap + * @ddata: pointer to drvdata + * @buf: buffer from userspace that contains stringified bitmap + * @type: button type (%EV_KEY, %EV_SW) + * + * This function parses stringified bitmap from @buf and disables/enables + * GPIO buttons accordingly. Returns 0 on success and negative error + * on failure. + */ +static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, + const char *buf, unsigned int type) +{ + int n_events = get_n_events_by_type(type); + const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type); + unsigned long *bits; + ssize_t error; + int i; + + bits = bitmap_zalloc(n_events, GFP_KERNEL); + if (!bits) + return -ENOMEM; + + error = bitmap_parselist(buf, bits, n_events); + if (error) + goto out; + + /* First validate */ + if (!bitmap_subset(bits, bitmap, n_events)) { + error = -EINVAL; + goto out; + } + + for (i = 0; i < ddata->pdata->nbuttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + + if (bdata->button->type != type) + continue; + + if (test_bit(*bdata->code, bits) && + !bdata->button->can_disable) { + error = -EINVAL; + goto out; + } + } + + mutex_lock(&ddata->disable_lock); + + for (i = 0; i < ddata->pdata->nbuttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + + if (bdata->button->type != type) + continue; + + if (test_bit(*bdata->code, bits)) + gpio_keys_disable_button(bdata); + else + gpio_keys_enable_button(bdata); + } + + mutex_unlock(&ddata->disable_lock); + +out: + bitmap_free(bits); + return error; +} + +#define ATTR_SHOW_FN(name, type, only_disabled) \ +static ssize_t gpio_keys_show_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct platform_device *pdev = to_platform_device(dev); \ + struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); \ + \ + return gpio_keys_attr_show_helper(ddata, buf, \ + type, only_disabled); \ +} + +ATTR_SHOW_FN(keys, EV_KEY, false); +ATTR_SHOW_FN(switches, EV_SW, false); +ATTR_SHOW_FN(disabled_keys, EV_KEY, true); +ATTR_SHOW_FN(disabled_switches, EV_SW, true); + +/* + * ATTRIBUTES: + * + * /sys/devices/platform/gpio-keys/keys [ro] + * /sys/devices/platform/gpio-keys/switches [ro] + */ +static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL); +static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL); + +#define ATTR_STORE_FN(name, type) \ +static ssize_t gpio_keys_store_##name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, \ + size_t count) \ +{ \ + struct platform_device *pdev = to_platform_device(dev); \ + struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); \ + ssize_t error; \ + \ + error = gpio_keys_attr_store_helper(ddata, buf, type); \ + if (error) \ + return error; \ + \ + return count; \ +} + +ATTR_STORE_FN(disabled_keys, EV_KEY); +ATTR_STORE_FN(disabled_switches, EV_SW); + +/* + * ATTRIBUTES: + * + * /sys/devices/platform/gpio-keys/disabled_keys [rw] + * /sys/devices/platform/gpio-keys/disables_switches [rw] + */ +static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO, + gpio_keys_show_disabled_keys, + gpio_keys_store_disabled_keys); +static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO, + gpio_keys_show_disabled_switches, + gpio_keys_store_disabled_switches); + +static struct attribute *gpio_keys_attrs[] = { + &dev_attr_keys.attr, + &dev_attr_switches.attr, + &dev_attr_disabled_keys.attr, + &dev_attr_disabled_switches.attr, + NULL, +}; + +static const struct attribute_group gpio_keys_attr_group = { + .attrs = gpio_keys_attrs, +}; + +static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) +{ + const struct gpio_keys_button *button = bdata->button; + struct input_dev *input = bdata->input; + unsigned int type = button->type ?: EV_KEY; + int state; + + state = gpiod_get_value_cansleep(bdata->gpiod); + if (state < 0) { + dev_err(input->dev.parent, + "failed to get gpio state: %d\n", state); + return; + } + + if (type == EV_ABS) { + if (state) + input_event(input, type, button->code, button->value); + } else { + input_event(input, type, *bdata->code, state); + } + input_sync(input); +} + +static void gpio_keys_gpio_work_func(struct work_struct *work) +{ + struct gpio_button_data *bdata = + container_of(work, struct gpio_button_data, work.work); + + gpio_keys_gpio_report_event(bdata); + + if (bdata->button->wakeup) + pm_relax(bdata->input->dev.parent); +} + +static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) +{ + struct gpio_button_data *bdata = dev_id; + + BUG_ON(irq != bdata->irq); + + if (bdata->button->wakeup) { + const struct gpio_keys_button *button = bdata->button; + + pm_stay_awake(bdata->input->dev.parent); + if (bdata->suspended && + (button->type == 0 || button->type == EV_KEY)) { + /* + * Simulate wakeup key press in case the key has + * already released by the time we got interrupt + * handler to run. + */ + input_report_key(bdata->input, button->code, 1); + } + } + + mod_delayed_work(system_wq, + &bdata->work, + msecs_to_jiffies(bdata->software_debounce)); + + return IRQ_HANDLED; +} + +static void gpio_keys_irq_timer(struct timer_list *t) +{ + struct gpio_button_data *bdata = from_timer(bdata, t, release_timer); + struct input_dev *input = bdata->input; + unsigned long flags; + + spin_lock_irqsave(&bdata->lock, flags); + if (bdata->key_pressed) { + input_event(input, EV_KEY, *bdata->code, 0); + input_sync(input); + bdata->key_pressed = false; + } + spin_unlock_irqrestore(&bdata->lock, flags); +} + +static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) +{ + struct gpio_button_data *bdata = dev_id; + struct input_dev *input = bdata->input; + unsigned long flags; + + BUG_ON(irq != bdata->irq); + + spin_lock_irqsave(&bdata->lock, flags); + + if (!bdata->key_pressed) { + if (bdata->button->wakeup) + pm_wakeup_event(bdata->input->dev.parent, 0); + + input_event(input, EV_KEY, *bdata->code, 1); + input_sync(input); + + if (!bdata->release_delay) { + input_event(input, EV_KEY, *bdata->code, 0); + input_sync(input); + goto out; + } + + bdata->key_pressed = true; + } + + if (bdata->release_delay) + mod_timer(&bdata->release_timer, + jiffies + msecs_to_jiffies(bdata->release_delay)); +out: + spin_unlock_irqrestore(&bdata->lock, flags); + return IRQ_HANDLED; +} + +static void gpio_keys_quiesce_key(void *data) +{ + struct gpio_button_data *bdata = data; + + if (bdata->gpiod) + cancel_delayed_work_sync(&bdata->work); + else + del_timer_sync(&bdata->release_timer); +} + +static int gpio_keys_setup_key(struct platform_device *pdev, + struct input_dev *input, + struct gpio_keys_drvdata *ddata, + const struct gpio_keys_button *button, + int idx, + struct fwnode_handle *child) +{ + const char *desc = button->desc ? button->desc : "gpio_keys"; + struct device *dev = &pdev->dev; + struct gpio_button_data *bdata = &ddata->data[idx]; + irq_handler_t isr; + unsigned long irqflags; + int irq; + int error; + + bdata->input = input; + bdata->button = button; + spin_lock_init(&bdata->lock); + + if (child) { + bdata->gpiod = devm_fwnode_get_gpiod_from_child(dev, NULL, + child, + GPIOD_IN, + desc); + if (IS_ERR(bdata->gpiod)) { + error = PTR_ERR(bdata->gpiod); + if (error == -ENOENT) { + /* + * GPIO is optional, we may be dealing with + * purely interrupt-driven setup. + */ + bdata->gpiod = NULL; + } else { + if (error != -EPROBE_DEFER) + dev_err(dev, "failed to get gpio: %d\n", + error); + return error; + } + } + } else if (gpio_is_valid(button->gpio)) { + /* + * Legacy GPIO number, so request the GPIO here and + * convert it to descriptor. + */ + unsigned flags = GPIOF_IN; + + if (button->active_low) + flags |= GPIOF_ACTIVE_LOW; + + error = devm_gpio_request_one(dev, button->gpio, flags, desc); + if (error < 0) { + dev_err(dev, "Failed to request GPIO %d, error %d\n", + button->gpio, error); + return error; + } + + bdata->gpiod = gpio_to_desc(button->gpio); + if (!bdata->gpiod) + return -EINVAL; + } + + if (bdata->gpiod) { + bool active_low = gpiod_is_active_low(bdata->gpiod); + + if (button->debounce_interval) { + error = gpiod_set_debounce(bdata->gpiod, + button->debounce_interval * 1000); + /* use timer if gpiolib doesn't provide debounce */ + if (error < 0) + bdata->software_debounce = + button->debounce_interval; + } + + if (button->irq) { + bdata->irq = button->irq; + } else { + irq = gpiod_to_irq(bdata->gpiod); + if (irq < 0) { + error = irq; + dev_err(dev, + "Unable to get irq number for GPIO %d, error %d\n", + button->gpio, error); + return error; + } + bdata->irq = irq; + } + + INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func); + + isr = gpio_keys_gpio_isr; + irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + + switch (button->wakeup_event_action) { + case EV_ACT_ASSERTED: + bdata->wakeup_trigger_type = active_low ? + IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING; + break; + case EV_ACT_DEASSERTED: + bdata->wakeup_trigger_type = active_low ? + IRQ_TYPE_EDGE_RISING : IRQ_TYPE_EDGE_FALLING; + break; + case EV_ACT_ANY: + /* fall through */ + default: + /* + * For other cases, we are OK letting suspend/resume + * not reconfigure the trigger type. + */ + break; + } + } else { + if (!button->irq) { + dev_err(dev, "Found button without gpio or irq\n"); + return -EINVAL; + } + + bdata->irq = button->irq; + + if (button->type && button->type != EV_KEY) { + dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n"); + return -EINVAL; + } + + bdata->release_delay = button->debounce_interval; + timer_setup(&bdata->release_timer, gpio_keys_irq_timer, 0); + + isr = gpio_keys_irq_isr; + irqflags = 0; + + /* + * For IRQ buttons, there is no interrupt for release. + * So we don't need to reconfigure the trigger type for wakeup. + */ + } + + bdata->code = &ddata->keymap[idx]; + *bdata->code = button->code; + input_set_capability(input, button->type ?: EV_KEY, *bdata->code); + + /* + * Install custom action to cancel release timer and + * workqueue item. + */ + error = devm_add_action(dev, gpio_keys_quiesce_key, bdata); + if (error) { + dev_err(dev, "failed to register quiesce action, error: %d\n", + error); + return error; + } + + /* + * If platform has specified that the button can be disabled, + * we don't want it to share the interrupt line. + */ + if (!button->can_disable) + irqflags |= IRQF_SHARED; + + error = devm_request_any_context_irq(dev, bdata->irq, isr, irqflags, + desc, bdata); + if (error < 0) { + dev_err(dev, "Unable to claim irq %d; error %d\n", + bdata->irq, error); + return error; + } + + return 0; +} + +static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata) +{ + struct input_dev *input = ddata->input; + int i; + + for (i = 0; i < ddata->pdata->nbuttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + if (bdata->gpiod) + gpio_keys_gpio_report_event(bdata); + } + input_sync(input); +} + +static int gpio_keys_open(struct input_dev *input) +{ + struct gpio_keys_drvdata *ddata = input_get_drvdata(input); + const struct gpio_keys_platform_data *pdata = ddata->pdata; + int error; + + if (pdata->enable) { + error = pdata->enable(input->dev.parent); + if (error) + return error; + } + + /* Report current state of buttons that are connected to GPIOs */ + gpio_keys_report_state(ddata); + + return 0; +} + +static void gpio_keys_close(struct input_dev *input) +{ + struct gpio_keys_drvdata *ddata = input_get_drvdata(input); + const struct gpio_keys_platform_data *pdata = ddata->pdata; + + if (pdata->disable) + pdata->disable(input->dev.parent); +} + +/* + * Handlers for alternative sources of platform_data + */ + +/* + * Translate properties into platform_data + */ +static struct gpio_keys_platform_data * +gpio_keys_get_devtree_pdata(struct device *dev) +{ + struct gpio_keys_platform_data *pdata; + struct gpio_keys_button *button; + struct fwnode_handle *child; + int nbuttons; + + nbuttons = device_get_child_node_count(dev); + if (nbuttons == 0) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(dev, + sizeof(*pdata) + nbuttons * sizeof(*button), + GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + button = (struct gpio_keys_button *)(pdata + 1); + + pdata->buttons = button; + pdata->nbuttons = nbuttons; + + pdata->rep = device_property_read_bool(dev, "autorepeat"); + + device_property_read_string(dev, "label", &pdata->name); + + device_for_each_child_node(dev, child) { + if (is_of_node(child)) + button->irq = + irq_of_parse_and_map(to_of_node(child), 0); + + if (fwnode_property_read_u32(child, "linux,code", + &button->code)) { + dev_err(dev, "Button without keycode\n"); + fwnode_handle_put(child); + return ERR_PTR(-EINVAL); + } + + fwnode_property_read_string(child, "label", &button->desc); + + if (fwnode_property_read_u32(child, "linux,input-type", + &button->type)) + button->type = EV_KEY; + + button->wakeup = + fwnode_property_read_bool(child, "wakeup-source") || + /* legacy name */ + fwnode_property_read_bool(child, "gpio-key,wakeup"); + + fwnode_property_read_u32(child, "wakeup-event-action", + &button->wakeup_event_action); + + button->can_disable = + fwnode_property_read_bool(child, "linux,can-disable"); + + if (fwnode_property_read_u32(child, "debounce-interval", + &button->debounce_interval)) + button->debounce_interval = 5; + + button++; + } + + return pdata; +} + +static const struct of_device_id gpio_keys_of_match[] = { + { .compatible = "gpio-keys", }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_keys_of_match); + +static int gpio_keys_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev); + struct fwnode_handle *child = NULL; + struct gpio_keys_drvdata *ddata; + struct input_dev *input; + size_t size; + int i, error; + int wakeup = 0; + + if (!pdata) { + pdata = gpio_keys_get_devtree_pdata(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + size = sizeof(struct gpio_keys_drvdata) + + pdata->nbuttons * sizeof(struct gpio_button_data); + ddata = devm_kzalloc(dev, size, GFP_KERNEL); + if (!ddata) { + dev_err(dev, "failed to allocate state\n"); + return -ENOMEM; + } + + ddata->keymap = devm_kcalloc(dev, + pdata->nbuttons, sizeof(ddata->keymap[0]), + GFP_KERNEL); + if (!ddata->keymap) + return -ENOMEM; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + ddata->pdata = pdata; + ddata->input = input; + mutex_init(&ddata->disable_lock); + + platform_set_drvdata(pdev, ddata); + input_set_drvdata(input, ddata); + + input->name = pdata->name ? : pdev->name; + input->phys = "gpio-keys/input0"; + input->dev.parent = dev; + input->open = gpio_keys_open; + input->close = gpio_keys_close; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + input->keycode = ddata->keymap; + input->keycodesize = sizeof(ddata->keymap[0]); + input->keycodemax = pdata->nbuttons; + + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < pdata->nbuttons; i++) { + const struct gpio_keys_button *button = &pdata->buttons[i]; + + if (!dev_get_platdata(dev)) { + child = device_get_next_child_node(dev, child); + if (!child) { + dev_err(dev, + "missing child device node for entry %d\n", + i); + return -EINVAL; + } + } + + error = gpio_keys_setup_key(pdev, input, ddata, + button, i, child); + if (error) { + fwnode_handle_put(child); + return error; + } + + if (button->wakeup) + wakeup = 1; + } + + fwnode_handle_put(child); + + error = devm_device_add_group(dev, &gpio_keys_attr_group); + if (error) { + dev_err(dev, "Unable to export keys/switches, error: %d\n", + error); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(dev, "Unable to register input device, error: %d\n", + error); + return error; + } + + device_init_wakeup(dev, wakeup); + + return 0; +} + +static int __maybe_unused +gpio_keys_button_enable_wakeup(struct gpio_button_data *bdata) +{ + int error; + + error = enable_irq_wake(bdata->irq); + if (error) { + dev_err(bdata->input->dev.parent, + "failed to configure IRQ %d as wakeup source: %d\n", + bdata->irq, error); + return error; + } + + if (bdata->wakeup_trigger_type) { + error = irq_set_irq_type(bdata->irq, + bdata->wakeup_trigger_type); + if (error) { + dev_err(bdata->input->dev.parent, + "failed to set wakeup trigger %08x for IRQ %d: %d\n", + bdata->wakeup_trigger_type, bdata->irq, error); + disable_irq_wake(bdata->irq); + return error; + } + } + + return 0; +} + +static void __maybe_unused +gpio_keys_button_disable_wakeup(struct gpio_button_data *bdata) +{ + int error; + + /* + * The trigger type is always both edges for gpio-based keys and we do + * not support changing wakeup trigger for interrupt-based keys. + */ + if (bdata->wakeup_trigger_type) { + error = irq_set_irq_type(bdata->irq, IRQ_TYPE_EDGE_BOTH); + if (error) + dev_warn(bdata->input->dev.parent, + "failed to restore interrupt trigger for IRQ %d: %d\n", + bdata->irq, error); + } + + error = disable_irq_wake(bdata->irq); + if (error) + dev_warn(bdata->input->dev.parent, + "failed to disable IRQ %d as wake source: %d\n", + bdata->irq, error); +} + +static int __maybe_unused +gpio_keys_enable_wakeup(struct gpio_keys_drvdata *ddata) +{ + struct gpio_button_data *bdata; + int error; + int i; + + for (i = 0; i < ddata->pdata->nbuttons; i++) { + bdata = &ddata->data[i]; + if (bdata->button->wakeup) { + error = gpio_keys_button_enable_wakeup(bdata); + if (error) + goto err_out; + } + bdata->suspended = true; + } + + return 0; + +err_out: + while (i--) { + bdata = &ddata->data[i]; + if (bdata->button->wakeup) + gpio_keys_button_disable_wakeup(bdata); + bdata->suspended = false; + } + + return error; +} + +static void __maybe_unused +gpio_keys_disable_wakeup(struct gpio_keys_drvdata *ddata) +{ + struct gpio_button_data *bdata; + int i; + + for (i = 0; i < ddata->pdata->nbuttons; i++) { + bdata = &ddata->data[i]; + bdata->suspended = false; + if (irqd_is_wakeup_set(irq_get_irq_data(bdata->irq))) + gpio_keys_button_disable_wakeup(bdata); + } +} + +static int __maybe_unused gpio_keys_suspend(struct device *dev) +{ + struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); + struct input_dev *input = ddata->input; + int error; + + if (device_may_wakeup(dev)) { + error = gpio_keys_enable_wakeup(ddata); + if (error) + return error; + } else { + mutex_lock(&input->mutex); + if (input->users) + gpio_keys_close(input); + mutex_unlock(&input->mutex); + } + + return 0; +} + +static int __maybe_unused gpio_keys_resume(struct device *dev) +{ + struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); + struct input_dev *input = ddata->input; + int error = 0; + + if (device_may_wakeup(dev)) { + gpio_keys_disable_wakeup(ddata); + } else { + mutex_lock(&input->mutex); + if (input->users) + error = gpio_keys_open(input); + mutex_unlock(&input->mutex); + } + + if (error) + return error; + + gpio_keys_report_state(ddata); + return 0; +} + +static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume); + +static struct platform_driver gpio_keys_device_driver = { + .probe = gpio_keys_probe, + .driver = { + .name = "gpio-keys", + .pm = &gpio_keys_pm_ops, + .of_match_table = gpio_keys_of_match, + } +}; + +static int __init gpio_keys_init(void) +{ + return platform_driver_register(&gpio_keys_device_driver); +} + +static void __exit gpio_keys_exit(void) +{ + platform_driver_unregister(&gpio_keys_device_driver); +} + +late_initcall(gpio_keys_init); +module_exit(gpio_keys_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); +MODULE_DESCRIPTION("Keyboard driver for GPIOs"); +MODULE_ALIAS("platform:gpio-keys"); diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c new file mode 100644 index 000000000..edc726210 --- /dev/null +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -0,0 +1,392 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com> + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio_keys.h> +#include <linux/property.h> + +#define DRV_NAME "gpio-keys-polled" + +struct gpio_keys_button_data { + struct gpio_desc *gpiod; + int last_state; + int count; + int threshold; +}; + +struct gpio_keys_polled_dev { + struct input_polled_dev *poll_dev; + struct device *dev; + const struct gpio_keys_platform_data *pdata; + unsigned long rel_axis_seen[BITS_TO_LONGS(REL_CNT)]; + unsigned long abs_axis_seen[BITS_TO_LONGS(ABS_CNT)]; + struct gpio_keys_button_data data[0]; +}; + +static void gpio_keys_button_event(struct input_polled_dev *dev, + const struct gpio_keys_button *button, + int state) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct input_dev *input = dev->input; + unsigned int type = button->type ?: EV_KEY; + + if (type == EV_REL) { + if (state) { + input_event(input, type, button->code, button->value); + __set_bit(button->code, bdev->rel_axis_seen); + } + } else if (type == EV_ABS) { + if (state) { + input_event(input, type, button->code, button->value); + __set_bit(button->code, bdev->abs_axis_seen); + } + } else { + input_event(input, type, button->code, state); + input_sync(input); + } +} + +static void gpio_keys_polled_check_state(struct input_polled_dev *dev, + const struct gpio_keys_button *button, + struct gpio_keys_button_data *bdata) +{ + int state; + + state = gpiod_get_value_cansleep(bdata->gpiod); + if (state < 0) { + dev_err(dev->input->dev.parent, + "failed to get gpio state: %d\n", state); + } else { + gpio_keys_button_event(dev, button, state); + + if (state != bdata->last_state) { + bdata->count = 0; + bdata->last_state = state; + } + } +} + +static void gpio_keys_polled_poll(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + const struct gpio_keys_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + memset(bdev->rel_axis_seen, 0, sizeof(bdev->rel_axis_seen)); + memset(bdev->abs_axis_seen, 0, sizeof(bdev->abs_axis_seen)); + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_keys_button_data *bdata = &bdev->data[i]; + + if (bdata->count < bdata->threshold) { + bdata->count++; + gpio_keys_button_event(dev, &pdata->buttons[i], + bdata->last_state); + } else { + gpio_keys_polled_check_state(dev, &pdata->buttons[i], + bdata); + } + } + + for_each_set_bit(i, input->relbit, REL_CNT) { + if (!test_bit(i, bdev->rel_axis_seen)) + input_event(input, EV_REL, i, 0); + } + + for_each_set_bit(i, input->absbit, ABS_CNT) { + if (!test_bit(i, bdev->abs_axis_seen)) + input_event(input, EV_ABS, i, 0); + } + + input_sync(input); +} + +static void gpio_keys_polled_open(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + const struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->enable) + pdata->enable(bdev->dev); +} + +static void gpio_keys_polled_close(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + const struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->disable) + pdata->disable(bdev->dev); +} + +static struct gpio_keys_platform_data * +gpio_keys_polled_get_devtree_pdata(struct device *dev) +{ + struct gpio_keys_platform_data *pdata; + struct gpio_keys_button *button; + struct fwnode_handle *child; + int nbuttons; + + nbuttons = device_get_child_node_count(dev); + if (nbuttons == 0) + return ERR_PTR(-EINVAL); + + pdata = devm_kzalloc(dev, sizeof(*pdata) + nbuttons * sizeof(*button), + GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + button = (struct gpio_keys_button *)(pdata + 1); + + pdata->buttons = button; + pdata->nbuttons = nbuttons; + + pdata->rep = device_property_present(dev, "autorepeat"); + device_property_read_u32(dev, "poll-interval", &pdata->poll_interval); + + device_for_each_child_node(dev, child) { + if (fwnode_property_read_u32(child, "linux,code", + &button->code)) { + dev_err(dev, "button without keycode\n"); + fwnode_handle_put(child); + return ERR_PTR(-EINVAL); + } + + fwnode_property_read_string(child, "label", &button->desc); + + if (fwnode_property_read_u32(child, "linux,input-type", + &button->type)) + button->type = EV_KEY; + + if (fwnode_property_read_u32(child, "linux,input-value", + (u32 *)&button->value)) + button->value = 1; + + button->wakeup = + fwnode_property_read_bool(child, "wakeup-source") || + /* legacy name */ + fwnode_property_read_bool(child, "gpio-key,wakeup"); + + if (fwnode_property_read_u32(child, "debounce-interval", + &button->debounce_interval)) + button->debounce_interval = 5; + + button++; + } + + return pdata; +} + +static void gpio_keys_polled_set_abs_params(struct input_dev *input, + const struct gpio_keys_platform_data *pdata, unsigned int code) +{ + int i, min = 0, max = 0; + + for (i = 0; i < pdata->nbuttons; i++) { + const struct gpio_keys_button *button = &pdata->buttons[i]; + + if (button->type != EV_ABS || button->code != code) + continue; + + if (button->value < min) + min = button->value; + if (button->value > max) + max = button->value; + } + + input_set_abs_params(input, code, min, max, 0, 0); +} + +static const struct of_device_id gpio_keys_polled_of_match[] = { + { .compatible = "gpio-keys-polled", }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_keys_polled_of_match); + +static int gpio_keys_polled_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fwnode_handle *child = NULL; + const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev); + struct gpio_keys_polled_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + size_t size; + int error; + int i; + + if (!pdata) { + pdata = gpio_keys_polled_get_devtree_pdata(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + if (!pdata->poll_interval) { + dev_err(dev, "missing poll_interval value\n"); + return -EINVAL; + } + + size = sizeof(struct gpio_keys_polled_dev) + + pdata->nbuttons * sizeof(struct gpio_keys_button_data); + bdev = devm_kzalloc(dev, size, GFP_KERNEL); + if (!bdev) { + dev_err(dev, "no memory for private data\n"); + return -ENOMEM; + } + + poll_dev = devm_input_allocate_polled_device(dev); + if (!poll_dev) { + dev_err(dev, "no memory for polled device\n"); + return -ENOMEM; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_keys_polled_poll; + poll_dev->poll_interval = pdata->poll_interval; + poll_dev->open = gpio_keys_polled_open; + poll_dev->close = gpio_keys_polled_close; + + input = poll_dev->input; + + input->name = pdev->name; + input->phys = DRV_NAME"/input0"; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + __set_bit(EV_KEY, input->evbit); + if (pdata->rep) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < pdata->nbuttons; i++) { + const struct gpio_keys_button *button = &pdata->buttons[i]; + struct gpio_keys_button_data *bdata = &bdev->data[i]; + unsigned int type = button->type ?: EV_KEY; + + if (button->wakeup) { + dev_err(dev, DRV_NAME " does not support wakeup\n"); + fwnode_handle_put(child); + return -EINVAL; + } + + if (!dev_get_platdata(dev)) { + /* No legacy static platform data */ + child = device_get_next_child_node(dev, child); + if (!child) { + dev_err(dev, "missing child device node\n"); + return -EINVAL; + } + + bdata->gpiod = devm_fwnode_get_gpiod_from_child(dev, + NULL, child, + GPIOD_IN, + button->desc); + if (IS_ERR(bdata->gpiod)) { + error = PTR_ERR(bdata->gpiod); + if (error != -EPROBE_DEFER) + dev_err(dev, + "failed to get gpio: %d\n", + error); + fwnode_handle_put(child); + return error; + } + } else if (gpio_is_valid(button->gpio)) { + /* + * Legacy GPIO number so request the GPIO here and + * convert it to descriptor. + */ + unsigned flags = GPIOF_IN; + + if (button->active_low) + flags |= GPIOF_ACTIVE_LOW; + + error = devm_gpio_request_one(dev, button->gpio, + flags, button->desc ? : DRV_NAME); + if (error) { + dev_err(dev, + "unable to claim gpio %u, err=%d\n", + button->gpio, error); + return error; + } + + bdata->gpiod = gpio_to_desc(button->gpio); + if (!bdata->gpiod) { + dev_err(dev, + "unable to convert gpio %u to descriptor\n", + button->gpio); + return -EINVAL; + } + } + + bdata->last_state = -1; + bdata->threshold = DIV_ROUND_UP(button->debounce_interval, + pdata->poll_interval); + + input_set_capability(input, type, button->code); + if (type == EV_ABS) + gpio_keys_polled_set_abs_params(input, pdata, + button->code); + } + + fwnode_handle_put(child); + + bdev->poll_dev = poll_dev; + bdev->dev = dev; + bdev->pdata = pdata; + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "unable to register polled device, err=%d\n", + error); + return error; + } + + /* report initial state of the buttons */ + for (i = 0; i < pdata->nbuttons; i++) + gpio_keys_polled_check_state(poll_dev, &pdata->buttons[i], + &bdev->data[i]); + + input_sync(input); + + return 0; +} + +static struct platform_driver gpio_keys_polled_driver = { + .probe = gpio_keys_polled_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = gpio_keys_polled_of_match, + }, +}; +module_platform_driver(gpio_keys_polled_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_DESCRIPTION("Polled GPIO Buttons driver"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c new file mode 100644 index 000000000..54afb3860 --- /dev/null +++ b/drivers/input/keyboard/hil_kbd.c @@ -0,0 +1,586 @@ +/* + * Generic linux-input device driver for keyboard devices + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + */ + +#include <linux/hil.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/completion.h> +#include <linux/slab.h> +#include <linux/pci_ids.h> + +#define PREFIX "HIL: " + +MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>"); +MODULE_DESCRIPTION("HIL keyboard/mouse driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_ALIAS("serio:ty03pr25id00ex*"); /* HIL keyboard */ +MODULE_ALIAS("serio:ty03pr25id0Fex*"); /* HIL mouse */ + +#define HIL_PACKET_MAX_LENGTH 16 + +#define HIL_KBD_SET1_UPBIT 0x01 +#define HIL_KBD_SET1_SHIFT 1 +static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly = + { HIL_KEYCODES_SET1 }; + +#define HIL_KBD_SET2_UPBIT 0x01 +#define HIL_KBD_SET2_SHIFT 1 +/* Set2 is user defined */ + +#define HIL_KBD_SET3_UPBIT 0x80 +#define HIL_KBD_SET3_SHIFT 0 +static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] __read_mostly = + { HIL_KEYCODES_SET3 }; + +static const char hil_language[][16] = { HIL_LOCALE_MAP }; + +struct hil_dev { + struct input_dev *dev; + struct serio *serio; + + /* Input buffer and index for packets from HIL bus. */ + hil_packet data[HIL_PACKET_MAX_LENGTH]; + int idx4; /* four counts per packet */ + + /* Raw device info records from HIL bus, see hil.h for fields. */ + char idd[HIL_PACKET_MAX_LENGTH]; /* DID byte and IDD record */ + char rsc[HIL_PACKET_MAX_LENGTH]; /* RSC record */ + char exd[HIL_PACKET_MAX_LENGTH]; /* EXD record */ + char rnm[HIL_PACKET_MAX_LENGTH + 1]; /* RNM record + NULL term. */ + + struct completion cmd_done; + + bool is_pointer; + /* Extra device details needed for pointing devices. */ + unsigned int nbtn, naxes; + unsigned int btnmap[7]; +}; + +static bool hil_dev_is_command_response(hil_packet p) +{ + if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) + return false; + + if ((p & ~HIL_CMDCT_RPL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) + return false; + + return true; +} + +static void hil_dev_handle_command_response(struct hil_dev *dev) +{ + hil_packet p; + char *buf; + int i, idx; + + idx = dev->idx4 / 4; + p = dev->data[idx - 1]; + + switch (p & HIL_PKT_DATA_MASK) { + case HIL_CMD_IDD: + buf = dev->idd; + break; + + case HIL_CMD_RSC: + buf = dev->rsc; + break; + + case HIL_CMD_EXD: + buf = dev->exd; + break; + + case HIL_CMD_RNM: + dev->rnm[HIL_PACKET_MAX_LENGTH] = 0; + buf = dev->rnm; + break; + + default: + /* These occur when device isn't present */ + if (p != (HIL_ERR_INT | HIL_PKT_CMD)) { + /* Anything else we'd like to know about. */ + printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); + } + goto out; + } + + for (i = 0; i < idx; i++) + buf[i] = dev->data[i] & HIL_PKT_DATA_MASK; + for (; i < HIL_PACKET_MAX_LENGTH; i++) + buf[i] = 0; + out: + complete(&dev->cmd_done); +} + +static void hil_dev_handle_kbd_events(struct hil_dev *kbd) +{ + struct input_dev *dev = kbd->dev; + int idx = kbd->idx4 / 4; + int i; + + switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) { + case HIL_POL_CHARTYPE_NONE: + return; + + case HIL_POL_CHARTYPE_ASCII: + for (i = 1; i < idx - 1; i++) + input_report_key(dev, kbd->data[i] & 0x7f, 1); + break; + + case HIL_POL_CHARTYPE_RSVD1: + case HIL_POL_CHARTYPE_RSVD2: + case HIL_POL_CHARTYPE_BINARY: + for (i = 1; i < idx - 1; i++) + input_report_key(dev, kbd->data[i], 1); + break; + + case HIL_POL_CHARTYPE_SET1: + for (i = 1; i < idx - 1; i++) { + unsigned int key = kbd->data[i]; + int up = key & HIL_KBD_SET1_UPBIT; + + key &= (~HIL_KBD_SET1_UPBIT & 0xff); + key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT]; + input_report_key(dev, key, !up); + } + break; + + case HIL_POL_CHARTYPE_SET2: + for (i = 1; i < idx - 1; i++) { + unsigned int key = kbd->data[i]; + int up = key & HIL_KBD_SET2_UPBIT; + + key &= (~HIL_KBD_SET1_UPBIT & 0xff); + key = key >> HIL_KBD_SET2_SHIFT; + input_report_key(dev, key, !up); + } + break; + + case HIL_POL_CHARTYPE_SET3: + for (i = 1; i < idx - 1; i++) { + unsigned int key = kbd->data[i]; + int up = key & HIL_KBD_SET3_UPBIT; + + key &= (~HIL_KBD_SET1_UPBIT & 0xff); + key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT]; + input_report_key(dev, key, !up); + } + break; + } + + input_sync(dev); +} + +static void hil_dev_handle_ptr_events(struct hil_dev *ptr) +{ + struct input_dev *dev = ptr->dev; + int idx = ptr->idx4 / 4; + hil_packet p = ptr->data[idx - 1]; + int i, cnt, laxis; + bool absdev, ax16; + + if ((p & HIL_CMDCT_POL) != idx - 1) { + printk(KERN_WARNING PREFIX + "Malformed poll packet %x (idx = %i)\n", p, idx); + return; + } + + i = (p & HIL_POL_AXIS_ALT) ? 3 : 0; + laxis = (p & HIL_POL_NUM_AXES_MASK) + i; + + ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */ + absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; + + for (cnt = 1; i < laxis; i++) { + unsigned int lo, hi, val; + + lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK; + hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0; + + if (absdev) { + val = lo + (hi << 8); +#ifdef TABLET_AUTOADJUST + if (val < input_abs_get_min(dev, ABS_X + i)) + input_abs_set_min(dev, ABS_X + i, val); + if (val > input_abs_get_max(dev, ABS_X + i)) + input_abs_set_max(dev, ABS_X + i, val); +#endif + if (i % 3) + val = input_abs_get_max(dev, ABS_X + i) - val; + input_report_abs(dev, ABS_X + i, val); + } else { + val = (int) (((int8_t) lo) | ((int8_t) hi << 8)); + if (i % 3) + val *= -1; + input_report_rel(dev, REL_X + i, val); + } + } + + while (cnt < idx - 1) { + unsigned int btn = ptr->data[cnt++]; + int up = btn & 1; + + btn &= 0xfe; + if (btn == 0x8e) + continue; /* TODO: proximity == touch? */ + if (btn > 0x8c || btn < 0x80) + continue; + btn = (btn - 0x80) >> 1; + btn = ptr->btnmap[btn]; + input_report_key(dev, btn, !up); + } + + input_sync(dev); +} + +static void hil_dev_process_err(struct hil_dev *dev) +{ + printk(KERN_WARNING PREFIX "errored HIL packet\n"); + dev->idx4 = 0; + complete(&dev->cmd_done); /* just in case somebody is waiting */ +} + +static irqreturn_t hil_dev_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct hil_dev *dev; + hil_packet packet; + int idx; + + dev = serio_get_drvdata(serio); + BUG_ON(dev == NULL); + + if (dev->idx4 >= HIL_PACKET_MAX_LENGTH * sizeof(hil_packet)) { + hil_dev_process_err(dev); + goto out; + } + + idx = dev->idx4 / 4; + if (!(dev->idx4 % 4)) + dev->data[idx] = 0; + packet = dev->data[idx]; + packet |= ((hil_packet)data) << ((3 - (dev->idx4 % 4)) * 8); + dev->data[idx] = packet; + + /* Records of N 4-byte hil_packets must terminate with a command. */ + if ((++dev->idx4 % 4) == 0) { + if ((packet & 0xffff0000) != HIL_ERR_INT) { + hil_dev_process_err(dev); + } else if (packet & HIL_PKT_CMD) { + if (hil_dev_is_command_response(packet)) + hil_dev_handle_command_response(dev); + else if (dev->is_pointer) + hil_dev_handle_ptr_events(dev); + else + hil_dev_handle_kbd_events(dev); + dev->idx4 = 0; + } + } + out: + return IRQ_HANDLED; +} + +static void hil_dev_disconnect(struct serio *serio) +{ + struct hil_dev *dev = serio_get_drvdata(serio); + + BUG_ON(dev == NULL); + + serio_close(serio); + input_unregister_device(dev->dev); + serio_set_drvdata(serio, NULL); + kfree(dev); +} + +static void hil_dev_keyboard_setup(struct hil_dev *kbd) +{ + struct input_dev *input_dev = kbd->dev; + uint8_t did = kbd->idd[0]; + int i; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | + BIT_MASK(LED_SCROLLL); + + for (i = 0; i < 128; i++) { + __set_bit(hil_kbd_set1[i], input_dev->keybit); + __set_bit(hil_kbd_set3[i], input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; + input_dev->keycodesize = sizeof(hil_kbd_set1[0]); + input_dev->keycode = hil_kbd_set1; + + input_dev->name = strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard"; + input_dev->phys = "hpkbd/input0"; + + printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n", + did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]); +} + +static void hil_dev_pointer_setup(struct hil_dev *ptr) +{ + struct input_dev *input_dev = ptr->dev; + uint8_t did = ptr->idd[0]; + uint8_t *idd = ptr->idd + 1; + unsigned int naxsets = HIL_IDD_NUM_AXSETS(*idd); + unsigned int i, btntype; + const char *txt; + + ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd); + + switch (did & HIL_IDD_DID_TYPE_MASK) { + case HIL_IDD_DID_TYPE_REL: + input_dev->evbit[0] = BIT_MASK(EV_REL); + + for (i = 0; i < ptr->naxes; i++) + __set_bit(REL_X + i, input_dev->relbit); + + for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++) + __set_bit(REL_X + i, input_dev->relbit); + + txt = "relative"; + break; + + case HIL_IDD_DID_TYPE_ABS: + input_dev->evbit[0] = BIT_MASK(EV_ABS); + + for (i = 0; i < ptr->naxes; i++) + input_set_abs_params(input_dev, ABS_X + i, + 0, HIL_IDD_AXIS_MAX(idd, i), 0, 0); + + for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++) + input_set_abs_params(input_dev, ABS_X + i, + 0, HIL_IDD_AXIS_MAX(idd, i - 3), 0, 0); + +#ifdef TABLET_AUTOADJUST + for (i = 0; i < ABS_MAX; i++) { + int diff = input_abs_get_max(input_dev, ABS_X + i) / 10; + input_abs_set_min(input_dev, ABS_X + i, + input_abs_get_min(input_dev, ABS_X + i) + diff); + input_abs_set_max(input_dev, ABS_X + i, + input_abs_get_max(input_dev, ABS_X + i) - diff); + } +#endif + + txt = "absolute"; + break; + + default: + BUG(); + } + + ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd); + if (ptr->nbtn) + input_dev->evbit[0] |= BIT_MASK(EV_KEY); + + btntype = BTN_MISC; + if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET) +#ifdef TABLET_SIMULATES_MOUSE + btntype = BTN_TOUCH; +#else + btntype = BTN_DIGI; +#endif + if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN) + btntype = BTN_TOUCH; + + if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE) + btntype = BTN_MOUSE; + + for (i = 0; i < ptr->nbtn; i++) { + __set_bit(btntype | i, input_dev->keybit); + ptr->btnmap[i] = btntype | i; + } + + if (btntype == BTN_MOUSE) { + /* Swap buttons 2 and 3 */ + ptr->btnmap[1] = BTN_MIDDLE; + ptr->btnmap[2] = BTN_RIGHT; + } + + input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device"; + + printk(KERN_INFO PREFIX + "HIL pointer device found (did: 0x%02x, axis: %s)\n", + did, txt); + printk(KERN_INFO PREFIX + "HIL pointer has %i buttons and %i sets of %i axes\n", + ptr->nbtn, naxsets, ptr->naxes); +} + +static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) +{ + struct hil_dev *dev; + struct input_dev *input_dev; + uint8_t did, *idd; + int error; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!dev || !input_dev) { + error = -ENOMEM; + goto bail0; + } + + dev->serio = serio; + dev->dev = input_dev; + + error = serio_open(serio, drv); + if (error) + goto bail0; + + serio_set_drvdata(serio, dev); + + /* Get device info. MLC driver supplies devid/status/etc. */ + init_completion(&dev->cmd_done); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_IDD); + error = wait_for_completion_killable(&dev->cmd_done); + if (error) + goto bail1; + + reinit_completion(&dev->cmd_done); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_RSC); + error = wait_for_completion_killable(&dev->cmd_done); + if (error) + goto bail1; + + reinit_completion(&dev->cmd_done); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_RNM); + error = wait_for_completion_killable(&dev->cmd_done); + if (error) + goto bail1; + + reinit_completion(&dev->cmd_done); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_EXD); + error = wait_for_completion_killable(&dev->cmd_done); + if (error) + goto bail1; + + did = dev->idd[0]; + idd = dev->idd + 1; + + switch (did & HIL_IDD_DID_TYPE_MASK) { + case HIL_IDD_DID_TYPE_KB_INTEGRAL: + case HIL_IDD_DID_TYPE_KB_ITF: + case HIL_IDD_DID_TYPE_KB_RSVD: + case HIL_IDD_DID_TYPE_CHAR: + if (HIL_IDD_NUM_BUTTONS(idd) || + HIL_IDD_NUM_AXES_PER_SET(*idd)) { + printk(KERN_INFO PREFIX + "combo devices are not supported.\n"); + error = -EINVAL; + goto bail1; + } + + dev->is_pointer = false; + hil_dev_keyboard_setup(dev); + break; + + case HIL_IDD_DID_TYPE_REL: + case HIL_IDD_DID_TYPE_ABS: + dev->is_pointer = true; + hil_dev_pointer_setup(dev); + break; + + default: + goto bail1; + } + + input_dev->id.bustype = BUS_HIL; + input_dev->id.vendor = PCI_VENDOR_ID_HP; + input_dev->id.product = 0x0001; /* TODO: get from kbd->rsc */ + input_dev->id.version = 0x0100; /* TODO: get from kbd->rsc */ + input_dev->dev.parent = &serio->dev; + + if (!dev->is_pointer) { + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + /* Enable Keyswitch Autorepeat 1 */ + serio_write(serio, HIL_CMD_EK1); + /* No need to wait for completion */ + } + + error = input_register_device(input_dev); + if (error) + goto bail1; + + return 0; + + bail1: + serio_close(serio); + serio_set_drvdata(serio, NULL); + bail0: + input_free_device(input_dev); + kfree(dev); + return error; +} + +static const struct serio_device_id hil_dev_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, hil_dev_ids); + +static struct serio_driver hil_serio_drv = { + .driver = { + .name = "hil_dev", + }, + .description = "HP HIL keyboard/mouse/tablet driver", + .id_table = hil_dev_ids, + .connect = hil_dev_connect, + .disconnect = hil_dev_disconnect, + .interrupt = hil_dev_interrupt +}; + +module_serio_driver(hil_serio_drv); diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c new file mode 100644 index 000000000..5c7afdec1 --- /dev/null +++ b/drivers/input/keyboard/hilkbd.c @@ -0,0 +1,398 @@ +/* + * linux/drivers/hil/hilkbd.c + * + * Copyright (C) 1998 Philip Blundell <philb@gnu.org> + * Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai> + * Copyright (C) 1999-2007 Helge Deller <deller@gmx.de> + * + * Very basic HP Human Interface Loop (HIL) driver. + * This driver handles the keyboard on HP300 (m68k) and on some + * HP700 (parisc) series machines. + * + * + * This file is subject to the terms and conditions of the GNU General Public + * License version 2. See the file COPYING in the main directory of this + * archive for more details. + */ + +#include <linux/pci_ids.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/hil.h> +#include <linux/io.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <asm/irq.h> +#ifdef CONFIG_HP300 +#include <asm/hwtest.h> +#endif + + +MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller"); +MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)"); +MODULE_LICENSE("GPL v2"); + + +#if defined(CONFIG_PARISC) + + #include <asm/io.h> + #include <asm/hardware.h> + #include <asm/parisc-device.h> + static unsigned long hil_base; /* HPA for the HIL device */ + static unsigned int hil_irq; + #define HILBASE hil_base /* HPPA (parisc) port address */ + #define HIL_DATA 0x800 + #define HIL_CMD 0x801 + #define HIL_IRQ hil_irq + #define hil_readb(p) gsc_readb(p) + #define hil_writeb(v,p) gsc_writeb((v),(p)) + +#elif defined(CONFIG_HP300) + + #define HILBASE 0xf0428000UL /* HP300 (m68k) port address */ + #define HIL_DATA 0x1 + #define HIL_CMD 0x3 + #define HIL_IRQ 2 + #define hil_readb(p) readb((const volatile void __iomem *)(p)) + #define hil_writeb(v, p) writeb((v), (volatile void __iomem *)(p)) + +#else +#error "HIL is not supported on this platform" +#endif + + + +/* HIL helper functions */ + +#define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY) +#define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY) +#define hil_status() (hil_readb(HILBASE + HIL_CMD)) +#define hil_command(x) do { hil_writeb((x), HILBASE + HIL_CMD); } while (0) +#define hil_read_data() (hil_readb(HILBASE + HIL_DATA)) +#define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0) + +/* HIL constants */ + +#define HIL_BUSY 0x02 +#define HIL_DATA_RDY 0x01 + +#define HIL_SETARD 0xA0 /* set auto-repeat delay */ +#define HIL_SETARR 0xA2 /* set auto-repeat rate */ +#define HIL_SETTONE 0xA3 /* set tone generator */ +#define HIL_CNMT 0xB2 /* clear nmi */ +#define HIL_INTON 0x5C /* Turn on interrupts. */ +#define HIL_INTOFF 0x5D /* Turn off interrupts. */ + +#define HIL_READKBDSADR 0xF9 +#define HIL_WRITEKBDSADR 0xE9 + +static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly = + { HIL_KEYCODES_SET1 }; + +/* HIL structure */ +static struct { + struct input_dev *dev; + + unsigned int curdev; + + unsigned char s; + unsigned char c; + int valid; + + unsigned char data[16]; + unsigned int ptr; + spinlock_t lock; + + void *dev_id; /* native bus device */ +} hil_dev; + + +static void poll_finished(void) +{ + int down; + int key; + unsigned char scode; + + switch (hil_dev.data[0]) { + case 0x40: + down = (hil_dev.data[1] & 1) == 0; + scode = hil_dev.data[1] >> 1; + key = hphilkeyb_keycode[scode]; + input_report_key(hil_dev.dev, key, down); + break; + } + hil_dev.curdev = 0; +} + + +static inline void handle_status(unsigned char s, unsigned char c) +{ + if (c & 0x8) { + /* End of block */ + if (c & 0x10) + poll_finished(); + } else { + if (c & 0x10) { + if (hil_dev.curdev) + poll_finished(); /* just in case */ + hil_dev.curdev = c & 7; + hil_dev.ptr = 0; + } + } +} + + +static inline void handle_data(unsigned char s, unsigned char c) +{ + if (hil_dev.curdev) { + hil_dev.data[hil_dev.ptr++] = c; + hil_dev.ptr &= 15; + } +} + + +/* handle HIL interrupts */ +static irqreturn_t hil_interrupt(int irq, void *handle) +{ + unsigned char s, c; + + s = hil_status(); + c = hil_read_data(); + + switch (s >> 4) { + case 0x5: + handle_status(s, c); + break; + case 0x6: + handle_data(s, c); + break; + case 0x4: + hil_dev.s = s; + hil_dev.c = c; + mb(); + hil_dev.valid = 1; + break; + } + return IRQ_HANDLED; +} + + +/* send a command to the HIL */ +static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) +{ + unsigned long flags; + + spin_lock_irqsave(&hil_dev.lock, flags); + while (hil_busy()) + /* wait */; + hil_command(cmd); + while (len--) { + while (hil_busy()) + /* wait */; + hil_write_data(*(data++)); + } + spin_unlock_irqrestore(&hil_dev.lock, flags); +} + + +/* initialize HIL */ +static int hil_keyb_init(void) +{ + unsigned char c; + unsigned int i, kbid; + wait_queue_head_t hil_wait; + int err; + + if (hil_dev.dev) + return -ENODEV; /* already initialized */ + + init_waitqueue_head(&hil_wait); + spin_lock_init(&hil_dev.lock); + + hil_dev.dev = input_allocate_device(); + if (!hil_dev.dev) + return -ENOMEM; + + err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); + if (err) { + printk(KERN_ERR "HIL: Can't get IRQ\n"); + goto err1; + } + + /* Turn on interrupts */ + hil_do(HIL_INTON, NULL, 0); + + /* Look for keyboards */ + hil_dev.valid = 0; /* clear any pending data */ + hil_do(HIL_READKBDSADR, NULL, 0); + + wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ); + if (!hil_dev.valid) + printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); + + c = hil_dev.c; + hil_dev.valid = 0; + if (c == 0) { + kbid = -1; + printk(KERN_WARNING "HIL: no keyboard present\n"); + } else { + kbid = ffz(~c); + printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid); + } + + /* set it to raw mode */ + c = 0; + hil_do(HIL_WRITEKBDSADR, &c, 1); + + for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) + if (hphilkeyb_keycode[i] != KEY_RESERVED) + __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); + + hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | + BIT_MASK(LED_SCROLLL); + hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; + hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]); + hil_dev.dev->keycode = hphilkeyb_keycode; + hil_dev.dev->name = "HIL keyboard"; + hil_dev.dev->phys = "hpkbd/input0"; + + hil_dev.dev->id.bustype = BUS_HIL; + hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP; + hil_dev.dev->id.product = 0x0001; + hil_dev.dev->id.version = 0x0010; + + err = input_register_device(hil_dev.dev); + if (err) { + printk(KERN_ERR "HIL: Can't register device\n"); + goto err2; + } + + printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", + hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); + + return 0; + +err2: + hil_do(HIL_INTOFF, NULL, 0); + free_irq(HIL_IRQ, hil_dev.dev_id); +err1: + input_free_device(hil_dev.dev); + hil_dev.dev = NULL; + return err; +} + +static void hil_keyb_exit(void) +{ + if (HIL_IRQ) + free_irq(HIL_IRQ, hil_dev.dev_id); + + /* Turn off interrupts */ + hil_do(HIL_INTOFF, NULL, 0); + + input_unregister_device(hil_dev.dev); + hil_dev.dev = NULL; +} + +#if defined(CONFIG_PARISC) +static int __init hil_probe_chip(struct parisc_device *dev) +{ + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -ENODEV; + + if (!dev->irq) { + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n", + (void *)dev->hpa.start); + return -ENODEV; + } + + hil_base = dev->hpa.start; + hil_irq = dev->irq; + hil_dev.dev_id = dev; + + printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq); + + return hil_keyb_init(); +} + +static int __exit hil_remove_chip(struct parisc_device *dev) +{ + hil_keyb_exit(); + + return 0; +} + +static const struct parisc_device_id hil_tbl[] __initconst = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 }, + { 0, } +}; + +#if 0 +/* Disabled to avoid conflicts with the HP SDC HIL drivers */ +MODULE_DEVICE_TABLE(parisc, hil_tbl); +#endif + +static struct parisc_driver hil_driver __refdata = { + .name = "hil", + .id_table = hil_tbl, + .probe = hil_probe_chip, + .remove = __exit_p(hil_remove_chip), +}; + +static int __init hil_init(void) +{ + return register_parisc_driver(&hil_driver); +} + +static void __exit hil_exit(void) +{ + unregister_parisc_driver(&hil_driver); +} + +#else /* !CONFIG_PARISC */ + +static int __init hil_init(void) +{ + int error; + + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -EBUSY; + + if (!MACH_IS_HP300) + return -ENODEV; + + if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { + printk(KERN_ERR "HIL: hardware register was not found\n"); + return -ENODEV; + } + + if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { + printk(KERN_ERR "HIL: IOPORT region already used\n"); + return -EIO; + } + + error = hil_keyb_init(); + if (error) { + release_region(HILBASE + HIL_DATA, 2); + return error; + } + + return 0; +} + +static void __exit hil_exit(void) +{ + hil_keyb_exit(); + release_region(HILBASE + HIL_DATA, 2); +} + +#endif /* CONFIG_PARISC */ + +module_init(hil_init); +module_exit(hil_exit); diff --git a/drivers/input/keyboard/hpps2atkbd.h b/drivers/input/keyboard/hpps2atkbd.h new file mode 100644 index 000000000..dc33f6945 --- /dev/null +++ b/drivers/input/keyboard/hpps2atkbd.h @@ -0,0 +1,110 @@ +/* + * drivers/input/keyboard/hpps2atkbd.h + * + * Copyright (c) 2004 Helge Deller <deller@gmx.de> + * Copyright (c) 2002 Laurent Canet <canetl@esiee.fr> + * Copyright (c) 2002 Thibaut Varene <varenet@parisc-linux.org> + * Copyright (c) 2000 Xavier Debacker <debackex@esiee.fr> + * + * HP PS/2 AT-compatible Keyboard, found in PA/RISC Workstations & Laptops + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + + +/* Is the keyboard an RDI PrecisionBook? */ +#ifndef CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES +# define CONFLICT(x,y) x +#else +# define CONFLICT(x,y) y +#endif + +/* sadly RDI (Tadpole) decided to ship a different keyboard layout + than HP for their PS/2 laptop keyboard which leads to conflicting + keycodes between a normal HP PS/2 keyboard and a RDI Precisionbook. + HP: RDI: */ +#define C_07 CONFLICT( KEY_F12, KEY_F1 ) +#define C_11 CONFLICT( KEY_LEFTALT, KEY_LEFTCTRL ) +#define C_14 CONFLICT( KEY_LEFTCTRL, KEY_CAPSLOCK ) +#define C_58 CONFLICT( KEY_CAPSLOCK, KEY_RIGHTCTRL ) +#define C_61 CONFLICT( KEY_102ND, KEY_LEFT ) + +/* Raw SET 2 scancode table */ + +/* 00 */ KEY_RESERVED, KEY_F9, KEY_RESERVED, KEY_F5, KEY_F3, KEY_F1, KEY_F2, C_07, +/* 08 */ KEY_ESC, KEY_F10, KEY_F8, KEY_F6, KEY_F4, KEY_TAB, KEY_GRAVE, KEY_F2, +/* 10 */ KEY_RESERVED, C_11, KEY_LEFTSHIFT, KEY_RESERVED, C_14, KEY_Q, KEY_1, KEY_F3, +/* 18 */ KEY_RESERVED, KEY_LEFTALT, KEY_Z, KEY_S, KEY_A, KEY_W, KEY_2, KEY_F4, +/* 20 */ KEY_RESERVED, KEY_C, KEY_X, KEY_D, KEY_E, KEY_4, KEY_3, KEY_F5, +/* 28 */ KEY_RESERVED, KEY_SPACE, KEY_V, KEY_F, KEY_T, KEY_R, KEY_5, KEY_F6, +/* 30 */ KEY_RESERVED, KEY_N, KEY_B, KEY_H, KEY_G, KEY_Y, KEY_6, KEY_F7, +/* 38 */ KEY_RESERVED, KEY_RIGHTALT, KEY_M, KEY_J, KEY_U, KEY_7, KEY_8, KEY_F8, +/* 40 */ KEY_RESERVED, KEY_COMMA, KEY_K, KEY_I, KEY_O, KEY_0, KEY_9, KEY_F9, +/* 48 */ KEY_RESERVED, KEY_DOT, KEY_SLASH, KEY_L, KEY_SEMICOLON, KEY_P, KEY_MINUS, KEY_F10, +/* 50 */ KEY_RESERVED, KEY_RESERVED, KEY_APOSTROPHE,KEY_RESERVED, KEY_LEFTBRACE, KEY_EQUAL, KEY_F11, KEY_SYSRQ, +/* 58 */ C_58, KEY_RIGHTSHIFT,KEY_ENTER, KEY_RIGHTBRACE,KEY_BACKSLASH, KEY_BACKSLASH,KEY_F12, KEY_SCROLLLOCK, +/* 60 */ KEY_DOWN, C_61, KEY_PAUSE, KEY_UP, KEY_DELETE, KEY_END, KEY_BACKSPACE, KEY_INSERT, +/* 68 */ KEY_RESERVED, KEY_KP1, KEY_RIGHT, KEY_KP4, KEY_KP7, KEY_PAGEDOWN, KEY_HOME, KEY_PAGEUP, +/* 70 */ KEY_KP0, KEY_KPDOT, KEY_KP2, KEY_KP5, KEY_KP6, KEY_KP8, KEY_ESC, KEY_NUMLOCK, +/* 78 */ KEY_F11, KEY_KPPLUS, KEY_KP3, KEY_KPMINUS, KEY_KPASTERISK,KEY_KP9, KEY_SCROLLLOCK,KEY_102ND, +/* 80 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 88 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 90 */ KEY_RESERVED, KEY_RIGHTALT, 255, KEY_RESERVED, KEY_RIGHTCTRL, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 98 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_CAPSLOCK, KEY_RESERVED, KEY_LEFTMETA, +/* a0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RIGHTMETA, +/* a8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_COMPOSE, +/* b0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* b8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* c0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* c8 */ KEY_RESERVED, KEY_RESERVED, KEY_KPSLASH, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* d0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* d8 */ KEY_RESERVED, KEY_RESERVED, KEY_KPENTER, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* e0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* e8 */ KEY_RESERVED, KEY_END, KEY_RESERVED, KEY_LEFT, KEY_HOME, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* f0 */ KEY_INSERT, KEY_DELETE, KEY_DOWN, KEY_RESERVED, KEY_RIGHT, KEY_UP, KEY_RESERVED, KEY_PAUSE, +/* f8 */ KEY_RESERVED, KEY_RESERVED, KEY_PAGEDOWN, KEY_RESERVED, KEY_SYSRQ, KEY_PAGEUP, KEY_RESERVED, KEY_RESERVED, + +/* These are offset for escaped keycodes: */ + +/* 00 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_F7, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 08 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_LEFTMETA, KEY_RIGHTMETA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 10 */ KEY_RESERVED, KEY_RIGHTALT, KEY_RESERVED, KEY_RESERVED, KEY_RIGHTCTRL, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 18 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 20 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 28 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 30 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 38 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 40 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 48 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 50 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 58 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 60 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 68 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 70 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 78 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 80 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 88 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 90 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* 98 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* a0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* a8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* b0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* b8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* c0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* c8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* d0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* d8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* e0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* e8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* f0 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, +/* f8 */ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + +#undef CONFLICT +#undef C_07 +#undef C_11 +#undef C_14 +#undef C_58 +#undef C_61 + diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c new file mode 100644 index 000000000..ae9c51cc8 --- /dev/null +++ b/drivers/input/keyboard/imx_keypad.c @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Driver for the IMX keypad port. +// Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/input/matrix_keypad.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/timer.h> + +/* + * Keypad Controller registers (halfword) + */ +#define KPCR 0x00 /* Keypad Control Register */ + +#define KPSR 0x02 /* Keypad Status Register */ +#define KBD_STAT_KPKD (0x1 << 0) /* Key Press Interrupt Status bit (w1c) */ +#define KBD_STAT_KPKR (0x1 << 1) /* Key Release Interrupt Status bit (w1c) */ +#define KBD_STAT_KDSC (0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/ +#define KBD_STAT_KRSS (0x1 << 3) /* Key Release Synch Status bit (w1c)*/ +#define KBD_STAT_KDIE (0x1 << 8) /* Key Depress Interrupt Enable Status bit */ +#define KBD_STAT_KRIE (0x1 << 9) /* Key Release Interrupt Enable */ +#define KBD_STAT_KPPEN (0x1 << 10) /* Keypad Clock Enable */ + +#define KDDR 0x04 /* Keypad Data Direction Register */ +#define KPDR 0x06 /* Keypad Data Register */ + +#define MAX_MATRIX_KEY_ROWS 8 +#define MAX_MATRIX_KEY_COLS 8 +#define MATRIX_ROW_SHIFT 3 + +#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS) + +struct imx_keypad { + + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + + int irq; + struct timer_list check_matrix_timer; + + /* + * The matrix is stable only if no changes are detected after + * IMX_KEYPAD_SCANS_FOR_STABILITY scans + */ +#define IMX_KEYPAD_SCANS_FOR_STABILITY 3 + int stable_count; + + bool enabled; + + /* Masks for enabled rows/cols */ + unsigned short rows_en_mask; + unsigned short cols_en_mask; + + unsigned short keycodes[MAX_MATRIX_KEY_NUM]; + + /* + * Matrix states: + * -stable: achieved after a complete debounce process. + * -unstable: used in the debouncing process. + */ + unsigned short matrix_stable_state[MAX_MATRIX_KEY_COLS]; + unsigned short matrix_unstable_state[MAX_MATRIX_KEY_COLS]; +}; + +/* Scan the matrix and return the new state in *matrix_volatile_state. */ +static void imx_keypad_scan_matrix(struct imx_keypad *keypad, + unsigned short *matrix_volatile_state) +{ + int col; + unsigned short reg_val; + + for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) { + if ((keypad->cols_en_mask & (1 << col)) == 0) + continue; + /* + * Discharge keypad capacitance: + * 2. write 1s on column data. + * 3. configure columns as totem-pole to discharge capacitance. + * 4. configure columns as open-drain. + */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val |= 0xff00; + writew(reg_val, keypad->mmio_base + KPDR); + + reg_val = readw(keypad->mmio_base + KPCR); + reg_val &= ~((keypad->cols_en_mask & 0xff) << 8); + writew(reg_val, keypad->mmio_base + KPCR); + + udelay(2); + + reg_val = readw(keypad->mmio_base + KPCR); + reg_val |= (keypad->cols_en_mask & 0xff) << 8; + writew(reg_val, keypad->mmio_base + KPCR); + + /* + * 5. Write a single column to 0, others to 1. + * 6. Sample row inputs and save data. + * 7. Repeat steps 2 - 6 for remaining columns. + */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val &= ~(1 << (8 + col)); + writew(reg_val, keypad->mmio_base + KPDR); + + /* + * Delay added to avoid propagating the 0 from column to row + * when scanning. + */ + udelay(5); + + /* + * 1s in matrix_volatile_state[col] means key pressures + * throw data from non enabled rows. + */ + reg_val = readw(keypad->mmio_base + KPDR); + matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask; + } + + /* + * Return in standby mode: + * 9. write 0s to columns + */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val &= 0x00ff; + writew(reg_val, keypad->mmio_base + KPDR); +} + +/* + * Compare the new matrix state (volatile) with the stable one stored in + * keypad->matrix_stable_state and fire events if changes are detected. + */ +static void imx_keypad_fire_events(struct imx_keypad *keypad, + unsigned short *matrix_volatile_state) +{ + struct input_dev *input_dev = keypad->input_dev; + int row, col; + + for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) { + unsigned short bits_changed; + int code; + + if ((keypad->cols_en_mask & (1 << col)) == 0) + continue; /* Column is not enabled */ + + bits_changed = keypad->matrix_stable_state[col] ^ + matrix_volatile_state[col]; + + if (bits_changed == 0) + continue; /* Column does not contain changes */ + + for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) { + if ((keypad->rows_en_mask & (1 << row)) == 0) + continue; /* Row is not enabled */ + if ((bits_changed & (1 << row)) == 0) + continue; /* Row does not contain changes */ + + code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], + matrix_volatile_state[col] & (1 << row)); + dev_dbg(&input_dev->dev, "Event code: %d, val: %d", + keypad->keycodes[code], + matrix_volatile_state[col] & (1 << row)); + } + } + input_sync(input_dev); +} + +/* + * imx_keypad_check_for_events is the timer handler. + */ +static void imx_keypad_check_for_events(struct timer_list *t) +{ + struct imx_keypad *keypad = from_timer(keypad, t, check_matrix_timer); + unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS]; + unsigned short reg_val; + bool state_changed, is_zero_matrix; + int i; + + memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state)); + + imx_keypad_scan_matrix(keypad, matrix_volatile_state); + + state_changed = false; + for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) { + if ((keypad->cols_en_mask & (1 << i)) == 0) + continue; + + if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) { + state_changed = true; + break; + } + } + + /* + * If the matrix state is changed from the previous scan + * (Re)Begin the debouncing process, saving the new state in + * keypad->matrix_unstable_state. + * else + * Increase the count of number of scans with a stable state. + */ + if (state_changed) { + memcpy(keypad->matrix_unstable_state, matrix_volatile_state, + sizeof(matrix_volatile_state)); + keypad->stable_count = 0; + } else + keypad->stable_count++; + + /* + * If the matrix is not as stable as we want reschedule scan + * in the near future. + */ + if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) { + mod_timer(&keypad->check_matrix_timer, + jiffies + msecs_to_jiffies(10)); + return; + } + + /* + * If the matrix state is stable, fire the events and save the new + * stable state. Note, if the matrix is kept stable for longer + * (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all + * events have already been generated. + */ + if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) { + imx_keypad_fire_events(keypad, matrix_volatile_state); + + memcpy(keypad->matrix_stable_state, matrix_volatile_state, + sizeof(matrix_volatile_state)); + } + + is_zero_matrix = true; + for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) { + if (matrix_volatile_state[i] != 0) { + is_zero_matrix = false; + break; + } + } + + + if (is_zero_matrix) { + /* + * All keys have been released. Enable only the KDI + * interrupt for future key presses (clear the KDI + * status bit and its sync chain before that). + */ + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC; + writew(reg_val, keypad->mmio_base + KPSR); + + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KDIE; + reg_val &= ~KBD_STAT_KRIE; + writew(reg_val, keypad->mmio_base + KPSR); + } else { + /* + * Some keys are still pressed. Schedule a rescan in + * attempt to detect multiple key presses and enable + * the KRI interrupt to react quickly to key release + * event. + */ + mod_timer(&keypad->check_matrix_timer, + jiffies + msecs_to_jiffies(60)); + + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS; + writew(reg_val, keypad->mmio_base + KPSR); + + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KRIE; + reg_val &= ~KBD_STAT_KDIE; + writew(reg_val, keypad->mmio_base + KPSR); + } +} + +static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id) +{ + struct imx_keypad *keypad = dev_id; + unsigned short reg_val; + + reg_val = readw(keypad->mmio_base + KPSR); + + /* Disable both interrupt types */ + reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + /* Clear interrupts status bits */ + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; + writew(reg_val, keypad->mmio_base + KPSR); + + if (keypad->enabled) { + /* The matrix is supposed to be changed */ + keypad->stable_count = 0; + + /* Schedule the scanning procedure near in the future */ + mod_timer(&keypad->check_matrix_timer, + jiffies + msecs_to_jiffies(2)); + } + + return IRQ_HANDLED; +} + +static void imx_keypad_config(struct imx_keypad *keypad) +{ + unsigned short reg_val; + + /* + * Include enabled rows in interrupt generation (KPCR[7:0]) + * Configure keypad columns as open-drain (KPCR[15:8]) + */ + reg_val = readw(keypad->mmio_base + KPCR); + reg_val |= keypad->rows_en_mask & 0xff; /* rows */ + reg_val |= (keypad->cols_en_mask & 0xff) << 8; /* cols */ + writew(reg_val, keypad->mmio_base + KPCR); + + /* Write 0's to KPDR[15:8] (Colums) */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val &= 0x00ff; + writew(reg_val, keypad->mmio_base + KPDR); + + /* Configure columns as output, rows as input (KDDR[15:0]) */ + writew(0xff00, keypad->mmio_base + KDDR); + + /* + * Clear Key Depress and Key Release status bit. + * Clear both synchronizer chain. + */ + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD | + KBD_STAT_KDSC | KBD_STAT_KRSS; + writew(reg_val, keypad->mmio_base + KPSR); + + /* Enable KDI and disable KRI (avoid false release events). */ + reg_val |= KBD_STAT_KDIE; + reg_val &= ~KBD_STAT_KRIE; + writew(reg_val, keypad->mmio_base + KPSR); +} + +static void imx_keypad_inhibit(struct imx_keypad *keypad) +{ + unsigned short reg_val; + + /* Inhibit KDI and KRI interrupts. */ + reg_val = readw(keypad->mmio_base + KPSR); + reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; + writew(reg_val, keypad->mmio_base + KPSR); + + /* Colums as open drain and disable all rows */ + reg_val = (keypad->cols_en_mask & 0xff) << 8; + writew(reg_val, keypad->mmio_base + KPCR); +} + +static void imx_keypad_close(struct input_dev *dev) +{ + struct imx_keypad *keypad = input_get_drvdata(dev); + + dev_dbg(&dev->dev, ">%s\n", __func__); + + /* Mark keypad as being inactive */ + keypad->enabled = false; + synchronize_irq(keypad->irq); + del_timer_sync(&keypad->check_matrix_timer); + + imx_keypad_inhibit(keypad); + + /* Disable clock unit */ + clk_disable_unprepare(keypad->clk); +} + +static int imx_keypad_open(struct input_dev *dev) +{ + struct imx_keypad *keypad = input_get_drvdata(dev); + int error; + + dev_dbg(&dev->dev, ">%s\n", __func__); + + /* Enable the kpp clock */ + error = clk_prepare_enable(keypad->clk); + if (error) + return error; + + /* We became active from now */ + keypad->enabled = true; + + imx_keypad_config(keypad); + + /* Sanity control, not all the rows must be actived now. */ + if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) { + dev_err(&dev->dev, + "too many keys pressed, control pins initialisation\n"); + goto open_err; + } + + return 0; + +open_err: + imx_keypad_close(dev); + return -EIO; +} + +#ifdef CONFIG_OF +static const struct of_device_id imx_keypad_of_match[] = { + { .compatible = "fsl,imx21-kpp", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_keypad_of_match); +#endif + +static int imx_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keymap_data *keymap_data = + dev_get_platdata(&pdev->dev); + struct imx_keypad *keypad; + struct input_dev *input_dev; + struct resource *res; + int irq, error, i, row, col; + + if (!keymap_data && !pdev->dev.of_node) { + dev_err(&pdev->dev, "no keymap defined\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq defined in platform data\n"); + return irq; + } + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL); + if (!keypad) { + dev_err(&pdev->dev, "not enough memory for driver data\n"); + return -ENOMEM; + } + + keypad->input_dev = input_dev; + keypad->irq = irq; + keypad->stable_count = 0; + + timer_setup(&keypad->check_matrix_timer, + imx_keypad_check_for_events, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(keypad->mmio_base)) + return PTR_ERR(keypad->mmio_base); + + keypad->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + return PTR_ERR(keypad->clk); + } + + /* Init the Input device */ + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->open = imx_keypad_open; + input_dev->close = imx_keypad_close; + + error = matrix_keypad_build_keymap(keymap_data, NULL, + MAX_MATRIX_KEY_ROWS, + MAX_MATRIX_KEY_COLS, + keypad->keycodes, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return error; + } + + /* Search for rows and cols enabled */ + for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) { + for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) { + i = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT); + if (keypad->keycodes[i] != KEY_RESERVED) { + keypad->rows_en_mask |= 1 << row; + keypad->cols_en_mask |= 1 << col; + } + } + } + dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask); + dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask); + + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + /* Ensure that the keypad will stay dormant until opened */ + error = clk_prepare_enable(keypad->clk); + if (error) + return error; + imx_keypad_inhibit(keypad); + clk_disable_unprepare(keypad->clk); + + error = devm_request_irq(&pdev->dev, irq, imx_keypad_irq_handler, 0, + pdev->name, keypad); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return error; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + platform_set_drvdata(pdev, keypad); + device_init_wakeup(&pdev->dev, 1); + + return 0; +} + +static int __maybe_unused imx_kbd_noirq_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx_keypad *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input_dev; + unsigned short reg_val = readw(kbd->mmio_base + KPSR); + + /* imx kbd can wake up system even clock is disabled */ + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + clk_disable_unprepare(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) { + if (reg_val & KBD_STAT_KPKD) + reg_val |= KBD_STAT_KRIE; + if (reg_val & KBD_STAT_KPKR) + reg_val |= KBD_STAT_KDIE; + writew(reg_val, kbd->mmio_base + KPSR); + + enable_irq_wake(kbd->irq); + } + + return 0; +} + +static int __maybe_unused imx_kbd_noirq_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct imx_keypad *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input_dev; + int ret = 0; + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(kbd->irq); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + ret = clk_prepare_enable(kbd->clk); + if (ret) + goto err_clk; + } + +err_clk: + mutex_unlock(&input_dev->mutex); + + return ret; +} + +static const struct dev_pm_ops imx_kbd_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_kbd_noirq_suspend, imx_kbd_noirq_resume) +}; + +static struct platform_driver imx_keypad_driver = { + .driver = { + .name = "imx-keypad", + .pm = &imx_kbd_pm_ops, + .of_match_table = of_match_ptr(imx_keypad_of_match), + }, + .probe = imx_keypad_probe, +}; +module_platform_driver(imx_keypad_driver); + +MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>"); +MODULE_DESCRIPTION("IMX Keypad Port Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:imx-keypad"); diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c new file mode 100644 index 000000000..602900d1f --- /dev/null +++ b/drivers/input/keyboard/ipaq-micro-keys.c @@ -0,0 +1,168 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * h3600 atmel micro companion support, key subdevice + * based on previous kernel 2.4 version + * Author : Alessandro Gardich <gremlin@gremlin.it> + * Author : Linus Walleij <linus.walleij@linaro.org> + * + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/pm.h> +#include <linux/sysctl.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/mfd/ipaq-micro.h> + +struct ipaq_micro_keys { + struct ipaq_micro *micro; + struct input_dev *input; + u16 *codes; +}; + +static const u16 micro_keycodes[] = { + KEY_RECORD, /* 1: Record button */ + KEY_CALENDAR, /* 2: Calendar */ + KEY_ADDRESSBOOK, /* 3: Contacts (looks like Outlook) */ + KEY_MAIL, /* 4: Envelope (Q on older iPAQs) */ + KEY_HOMEPAGE, /* 5: Start (looks like swoopy arrow) */ + KEY_UP, /* 6: Up */ + KEY_RIGHT, /* 7: Right */ + KEY_LEFT, /* 8: Left */ + KEY_DOWN, /* 9: Down */ +}; + +static void micro_key_receive(void *data, int len, unsigned char *msg) +{ + struct ipaq_micro_keys *keys = data; + int key, down; + + down = 0x80 & msg[0]; + key = 0x7f & msg[0]; + + if (key < ARRAY_SIZE(micro_keycodes)) { + input_report_key(keys->input, keys->codes[key], down); + input_sync(keys->input); + } +} + +static void micro_key_start(struct ipaq_micro_keys *keys) +{ + spin_lock(&keys->micro->lock); + keys->micro->key = micro_key_receive; + keys->micro->key_data = keys; + spin_unlock(&keys->micro->lock); +} + +static void micro_key_stop(struct ipaq_micro_keys *keys) +{ + spin_lock(&keys->micro->lock); + keys->micro->key = NULL; + keys->micro->key_data = NULL; + spin_unlock(&keys->micro->lock); +} + +static int micro_key_open(struct input_dev *input) +{ + struct ipaq_micro_keys *keys = input_get_drvdata(input); + + micro_key_start(keys); + + return 0; +} + +static void micro_key_close(struct input_dev *input) +{ + struct ipaq_micro_keys *keys = input_get_drvdata(input); + + micro_key_stop(keys); +} + +static int micro_key_probe(struct platform_device *pdev) +{ + struct ipaq_micro_keys *keys; + int error; + int i; + + keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL); + if (!keys) + return -ENOMEM; + + keys->micro = dev_get_drvdata(pdev->dev.parent); + + keys->input = devm_input_allocate_device(&pdev->dev); + if (!keys->input) + return -ENOMEM; + + keys->input->keycodesize = sizeof(micro_keycodes[0]); + keys->input->keycodemax = ARRAY_SIZE(micro_keycodes); + keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes, + keys->input->keycodesize * keys->input->keycodemax, + GFP_KERNEL); + keys->input->keycode = keys->codes; + + __set_bit(EV_KEY, keys->input->evbit); + for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++) + __set_bit(micro_keycodes[i], keys->input->keybit); + + keys->input->name = "h3600 micro keys"; + keys->input->open = micro_key_open; + keys->input->close = micro_key_close; + input_set_drvdata(keys->input, keys); + + error = input_register_device(keys->input); + if (error) + return error; + + platform_set_drvdata(pdev, keys); + return 0; +} + +static int __maybe_unused micro_key_suspend(struct device *dev) +{ + struct ipaq_micro_keys *keys = dev_get_drvdata(dev); + + micro_key_stop(keys); + + return 0; +} + +static int __maybe_unused micro_key_resume(struct device *dev) +{ + struct ipaq_micro_keys *keys = dev_get_drvdata(dev); + struct input_dev *input = keys->input; + + mutex_lock(&input->mutex); + + if (input->users) + micro_key_start(keys); + + mutex_unlock(&input->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops, + micro_key_suspend, micro_key_resume); + +static struct platform_driver micro_key_device_driver = { + .driver = { + .name = "ipaq-micro-keys", + .pm = µ_key_dev_pm_ops, + }, + .probe = micro_key_probe, +}; +module_platform_driver(micro_key_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys"); +MODULE_ALIAS("platform:ipaq-micro-keys"); diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c new file mode 100644 index 000000000..0116ac99f --- /dev/null +++ b/drivers/input/keyboard/jornada680_kbd.c @@ -0,0 +1,246 @@ +/* + * drivers/input/keyboard/jornada680_kbd.c + * + * HP Jornada 620/660/680/690 scan keyboard platform driver + * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> + * + * Based on hp680_keyb.c + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2005 Andriy Skulysh + * Split from drivers/input/keyboard/hp600_keyb.c + * Copyright (C) 2000 Yaegashi Takeshi (hp6xx kbd scan routine and translation table) + * Copyright (C) 2000 Niibe Yutaka (HP620 Keyb translation table) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/delay.h> +#include <asm/io.h> + +#define PCCR 0xa4000104 +#define PDCR 0xa4000106 +#define PECR 0xa4000108 +#define PFCR 0xa400010a +#define PCDR 0xa4000124 +#define PDDR 0xa4000126 +#define PEDR 0xa4000128 +#define PFDR 0xa400012a +#define PGDR 0xa400012c +#define PHDR 0xa400012e +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 +#define PLDR 0xa4000134 + +static const unsigned short jornada_scancodes[] = { +/* PTD1 */ KEY_CAPSLOCK, KEY_MACRO, KEY_LEFTCTRL, 0, KEY_ESC, KEY_KP5, 0, 0, /* 1 -> 8 */ + KEY_F1, KEY_F2, KEY_F3, KEY_F8, KEY_F7, KEY_F6, KEY_F4, KEY_F5, /* 9 -> 16 */ +/* PTD5 */ KEY_SLASH, KEY_APOSTROPHE, KEY_ENTER, 0, KEY_Z, 0, 0, 0, /* 17 -> 24 */ + KEY_X, KEY_C, KEY_V, KEY_DOT, KEY_COMMA, KEY_M, KEY_B, KEY_N, /* 25 -> 32 */ +/* PTD7 */ KEY_KP2, KEY_KP6, KEY_KP3, 0, 0, 0, 0, 0, /* 33 -> 40 */ + KEY_F10, KEY_RO, KEY_F9, KEY_KP4, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_LEFTALT, KEY_HANJA, /* 41 -> 48 */ +/* PTE0 */ KEY_KATAKANA, KEY_KP0, KEY_GRAVE, 0, KEY_FINANCE, 0, 0, 0, /* 49 -> 56 */ + KEY_KPMINUS, KEY_HIRAGANA, KEY_SPACE, KEY_KPDOT, KEY_VOLUMEUP, 249, 0, 0, /* 57 -> 64 */ +/* PTE1 */ KEY_SEMICOLON, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, KEY_A, 0, 0, 0, /* 65 -> 72 */ + KEY_S, KEY_D, KEY_F, KEY_L, KEY_K, KEY_J, KEY_G, KEY_H, /* 73 -> 80 */ +/* PTE3 */ KEY_KP8, KEY_LEFTMETA, KEY_RIGHTSHIFT, 0, KEY_TAB, 0, 0, 0, /* 81 -> 88 */ + 0, KEY_LEFTSHIFT, KEY_KP7, KEY_KP9, KEY_KP1, KEY_F11, KEY_KPPLUS, KEY_KPASTERISK, /* 89 -> 96 */ +/* PTE6 */ KEY_P, KEY_LEFTBRACE, KEY_BACKSPACE, 0, KEY_Q, 0, 0, 0, /* 97 -> 104 */ + KEY_W, KEY_E, KEY_R, KEY_O, KEY_I, KEY_U, KEY_T, KEY_Y, /* 105 -> 112 */ +/* PTE7 */ KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_1, 0, 0, 0, /* 113 -> 120 */ + KEY_2, KEY_3, KEY_4, KEY_9, KEY_8, KEY_7, KEY_5, KEY_6, /* 121 -> 128 */ +/* **** */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0 +}; + +#define JORNADA_SCAN_SIZE 18 + +struct jornadakbd { + struct input_polled_dev *poll_dev; + unsigned short keymap[ARRAY_SIZE(jornada_scancodes)]; + unsigned char length; + unsigned char old_scan[JORNADA_SCAN_SIZE]; + unsigned char new_scan[JORNADA_SCAN_SIZE]; +}; + +static void jornada_parse_kbd(struct jornadakbd *jornadakbd) +{ + struct input_dev *input_dev = jornadakbd->poll_dev->input; + unsigned short *keymap = jornadakbd->keymap; + unsigned int sync_me = 0; + unsigned int i, j; + + for (i = 0; i < JORNADA_SCAN_SIZE; i++) { + unsigned char new = jornadakbd->new_scan[i]; + unsigned char old = jornadakbd->old_scan[i]; + unsigned int xor = new ^ old; + + if (xor == 0) + continue; + + for (j = 0; j < 8; j++) { + unsigned int bit = 1 << j; + if (xor & bit) { + unsigned int scancode = (i << 3) + j; + input_event(input_dev, + EV_MSC, MSC_SCAN, scancode); + input_report_key(input_dev, + keymap[scancode], + !(new & bit)); + sync_me = 1; + } + } + } + + if (sync_me) + input_sync(input_dev); +} + +static void jornada_scan_keyb(unsigned char *s) +{ + int i; + unsigned short ec_static, dc_static; /* = UINT16_t */ + unsigned char matrix_switch[] = { + 0xfd, 0xff, /* PTD1 PD(1) */ + 0xdf, 0xff, /* PTD5 PD(5) */ + 0x7f, 0xff, /* PTD7 PD(7) */ + 0xff, 0xfe, /* PTE0 PE(0) */ + 0xff, 0xfd, /* PTE1 PE(1) */ + 0xff, 0xf7, /* PTE3 PE(3) */ + 0xff, 0xbf, /* PTE6 PE(6) */ + 0xff, 0x7f, /* PTE7 PE(7) */ + }, *t = matrix_switch; + /* PD(x) : + 1. 0xcc0c & (1~(1 << (2*(x)+1))))) + 2. (0xf0cf & 0xfffff) */ + /* PE(x) : + 1. 0xcc0c & 0xffff + 2. 0xf0cf & (1~(1 << (2*(x)+1))))) */ + unsigned short matrix_PDE[] = { + 0xcc04, 0xf0cf, /* PD(1) */ + 0xc40c, 0xf0cf, /* PD(5) */ + 0x4c0c, 0xf0cf, /* PD(7) */ + 0xcc0c, 0xf0cd, /* PE(0) */ + 0xcc0c, 0xf0c7, /* PE(1) */ + 0xcc0c, 0xf04f, /* PE(3) */ + 0xcc0c, 0xd0cf, /* PE(6) */ + 0xcc0c, 0x70cf, /* PE(7) */ + }, *y = matrix_PDE; + + /* Save these control reg bits */ + dc_static = (__raw_readw(PDCR) & (~0xcc0c)); + ec_static = (__raw_readw(PECR) & (~0xf0cf)); + + for (i = 0; i < 8; i++) { + /* disable output for all but the one we want to scan */ + __raw_writew((dc_static | *y++), PDCR); + __raw_writew((ec_static | *y++), PECR); + udelay(5); + + /* Get scanline row */ + __raw_writeb(*t++, PDDR); + __raw_writeb(*t++, PEDR); + udelay(50); + + /* Read data */ + *s++ = __raw_readb(PCDR); + *s++ = __raw_readb(PFDR); + } + /* Scan no lines */ + __raw_writeb(0xff, PDDR); + __raw_writeb(0xff, PEDR); + + /* Enable all scanlines */ + __raw_writew((dc_static | (0x5555 & 0xcc0c)),PDCR); + __raw_writew((ec_static | (0x5555 & 0xf0cf)),PECR); + + /* Ignore extra keys and events */ + *s++ = __raw_readb(PGDR); + *s++ = __raw_readb(PHDR); +} + +static void jornadakbd680_poll(struct input_polled_dev *dev) +{ + struct jornadakbd *jornadakbd = dev->private; + + jornada_scan_keyb(jornadakbd->new_scan); + jornada_parse_kbd(jornadakbd); + memcpy(jornadakbd->old_scan, jornadakbd->new_scan, JORNADA_SCAN_SIZE); +} + +static int jornada680kbd_probe(struct platform_device *pdev) +{ + struct jornadakbd *jornadakbd; + struct input_polled_dev *poll_dev; + struct input_dev *input_dev; + int i, error; + + jornadakbd = devm_kzalloc(&pdev->dev, sizeof(struct jornadakbd), + GFP_KERNEL); + if (!jornadakbd) + return -ENOMEM; + + poll_dev = devm_input_allocate_polled_device(&pdev->dev); + if (!poll_dev) { + dev_err(&pdev->dev, "failed to allocate polled input device\n"); + return -ENOMEM; + } + + jornadakbd->poll_dev = poll_dev; + + memcpy(jornadakbd->keymap, jornada_scancodes, + sizeof(jornadakbd->keymap)); + + poll_dev->private = jornadakbd; + poll_dev->poll = jornadakbd680_poll; + poll_dev->poll_interval = 50; /* msec */ + + input_dev = poll_dev->input; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->name = "HP Jornada 680 keyboard"; + input_dev->phys = "jornadakbd/input0"; + input_dev->keycode = jornadakbd->keymap; + input_dev->keycodesize = sizeof(unsigned short); + input_dev->keycodemax = ARRAY_SIZE(jornada_scancodes); + input_dev->dev.parent = &pdev->dev; + input_dev->id.bustype = BUS_HOST; + + for (i = 0; i < 128; i++) + if (jornadakbd->keymap[i]) + __set_bit(jornadakbd->keymap[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + error = input_register_polled_device(jornadakbd->poll_dev); + if (error) { + dev_err(&pdev->dev, "failed to register polled input device\n"); + return error; + } + + return 0; +} + +static struct platform_driver jornada680kbd_driver = { + .driver = { + .name = "jornada680_kbd", + }, + .probe = jornada680kbd_probe, +}; +module_platform_driver(jornada680kbd_driver); + +MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); +MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:jornada680_kbd"); diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c new file mode 100644 index 000000000..1277c39f9 --- /dev/null +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -0,0 +1,147 @@ +/* + * drivers/input/keyboard/jornada720_kbd.c + * + * HP Jornada 720 keyboard platform driver + * + * Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@Gmail.com> + * + * Copyright (C) 2006 jornada 720 kbd driver by + Filip Zyzniewsk <Filip.Zyzniewski@tefnet.plX + * based on (C) 2004 jornada 720 kbd driver by + Alex Lange <chicken@handhelds.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <mach/jornada720.h> + +MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>"); +MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver"); +MODULE_LICENSE("GPL v2"); + +static unsigned short jornada_std_keymap[128] = { /* ROW */ + 0, KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, /* #1 */ + KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, /* -> */ + 0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, /* #2 */ + KEY_0, KEY_MINUS, KEY_EQUAL,0, 0, 0, /* -> */ + 0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_O, /* #3 */ + KEY_P, KEY_BACKSLASH, KEY_BACKSPACE, 0, 0, 0, /* -> */ + 0, KEY_A, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_J, KEY_K, KEY_L, /* #4 */ + KEY_SEMICOLON, KEY_LEFTBRACE, KEY_RIGHTBRACE, 0, 0, 0, /* -> */ + 0, KEY_Z, KEY_X, KEY_C, KEY_V, KEY_B, KEY_N, KEY_M, KEY_COMMA, /* #5 */ + KEY_DOT, KEY_KPMINUS, KEY_APOSTROPHE, KEY_ENTER, 0, 0,0, /* -> */ + 0, KEY_TAB, 0, KEY_LEFTSHIFT, 0, KEY_APOSTROPHE, 0, 0, 0, 0, /* #6 */ + KEY_UP, 0, KEY_RIGHTSHIFT, 0, 0, 0,0, 0, 0, 0, 0, KEY_LEFTALT, KEY_GRAVE, /* -> */ + 0, 0, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0,0, KEY_KPASTERISK, /* -> */ + KEY_LEFTCTRL, 0, KEY_SPACE, 0, 0, 0, KEY_SLASH, KEY_DELETE, 0, 0, /* -> */ + 0, 0, 0, KEY_POWER, /* -> */ +}; + +struct jornadakbd { + unsigned short keymap[ARRAY_SIZE(jornada_std_keymap)]; + struct input_dev *input; +}; + +static irqreturn_t jornada720_kbd_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct jornadakbd *jornadakbd = platform_get_drvdata(pdev); + struct input_dev *input = jornadakbd->input; + u8 count, kbd_data, scan_code; + + /* startup ssp with spinlock */ + jornada_ssp_start(); + + if (jornada_ssp_inout(GETSCANKEYCODE) != TXDUMMY) { + dev_dbg(&pdev->dev, + "GetKeycode command failed with ETIMEDOUT, flushed bus\n"); + } else { + /* How many keycodes are waiting for us? */ + count = jornada_ssp_byte(TXDUMMY); + + /* Lets drag them out one at a time */ + while (count--) { + /* Exchange TxDummy for location (keymap[kbddata]) */ + kbd_data = jornada_ssp_byte(TXDUMMY); + scan_code = kbd_data & 0x7f; + + input_event(input, EV_MSC, MSC_SCAN, scan_code); + input_report_key(input, jornadakbd->keymap[scan_code], + !(kbd_data & 0x80)); + input_sync(input); + } + } + + /* release spinlock and turn off ssp */ + jornada_ssp_end(); + + return IRQ_HANDLED; +}; + +static int jornada720_kbd_probe(struct platform_device *pdev) +{ + struct jornadakbd *jornadakbd; + struct input_dev *input_dev; + int i, err, irq; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq < 0 ? irq : -EINVAL; + + jornadakbd = devm_kzalloc(&pdev->dev, sizeof(*jornadakbd), GFP_KERNEL); + input_dev = devm_input_allocate_device(&pdev->dev); + if (!jornadakbd || !input_dev) + return -ENOMEM; + + platform_set_drvdata(pdev, jornadakbd); + + memcpy(jornadakbd->keymap, jornada_std_keymap, + sizeof(jornada_std_keymap)); + jornadakbd->input = input_dev; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->name = "HP Jornada 720 keyboard"; + input_dev->phys = "jornadakbd/input0"; + input_dev->keycode = jornadakbd->keymap; + input_dev->keycodesize = sizeof(unsigned short); + input_dev->keycodemax = ARRAY_SIZE(jornada_std_keymap); + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + + for (i = 0; i < ARRAY_SIZE(jornadakbd->keymap); i++) + __set_bit(jornadakbd->keymap[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + err = devm_request_irq(&pdev->dev, irq, jornada720_kbd_interrupt, + IRQF_TRIGGER_FALLING, "jornadakbd", pdev); + if (err) { + dev_err(&pdev->dev, "unable to grab IRQ%d: %d\n", irq, err); + return err; + } + + return input_register_device(jornadakbd->input); +}; + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:jornada720_kbd"); + +static struct platform_driver jornada720_kbd_driver = { + .driver = { + .name = "jornada720_kbd", + }, + .probe = jornada720_kbd_probe, +}; +module_platform_driver(jornada720_kbd_driver); diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c new file mode 100644 index 000000000..471d53815 --- /dev/null +++ b/drivers/input/keyboard/lkkbd.c @@ -0,0 +1,733 @@ +/* + * Copyright (C) 2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de> + */ + +/* + * LK keyboard driver for Linux, based on sunkbd.c (C) by Vojtech Pavlik + */ + +/* + * DEC LK201 and LK401 keyboard driver for Linux (primary for DECstations + * and VAXstations, but can also be used on any standard RS232 with an + * adaptor). + * + * DISCLAIMER: This works for _me_. If you break anything by using the + * information given below, I will _not_ be liable! + * + * RJ10 pinout: To DE9: Or DB25: + * 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD) + * 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND) + * 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD) + * 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!! + * + * Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For + * RJ10, it's like this: + * + * __=__ Hold the plug in front of you, cable downwards, + * /___/| nose is hidden behind the plug. Now, pin 1 is at + * |1234|| the left side, pin 4 at the right and 2 and 3 are + * |IIII|| in between, of course:) + * | || + * |____|/ + * || So the adaptor consists of three connected cables + * || for data transmission (RxD and TxD) and signal ground. + * Additionally, you have to get +12V from somewhere. + * Most easily, you'll get that from a floppy or HDD power connector. + * It's the yellow cable there (black is ground and red is +5V). + * + * The keyboard and all the commands it understands are documented in + * "VCB02 Video Subsystem - Technical Manual", EK-104AA-TM-001. This + * document is LK201 specific, but LK401 is mostly compatible. It comes + * up in LK201 mode and doesn't report any of the additional keys it + * has. These need to be switched on with the LK_CMD_ENABLE_LK401 + * command. You'll find this document (scanned .pdf file) on MANX, + * a search engine specific to DEC documentation. Try + * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1 + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/workqueue.h> + +#define DRIVER_DESC "LK keyboard driver" + +MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Known parameters: + * bell_volume + * keyclick_volume + * ctrlclick_volume + * + * Please notice that there's not yet an API to set these at runtime. + */ +static int bell_volume = 100; /* % */ +module_param(bell_volume, int, 0); +MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%"); + +static int keyclick_volume = 100; /* % */ +module_param(keyclick_volume, int, 0); +MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%"); + +static int ctrlclick_volume = 100; /* % */ +module_param(ctrlclick_volume, int, 0); +MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%"); + +static int lk201_compose_is_alt; +module_param(lk201_compose_is_alt, int, 0); +MODULE_PARM_DESC(lk201_compose_is_alt, + "If set non-zero, LK201' Compose key will act as an Alt key"); + + + +#undef LKKBD_DEBUG +#ifdef LKKBD_DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do {} while (0) +#endif + +/* LED control */ +#define LK_LED_WAIT 0x81 +#define LK_LED_COMPOSE 0x82 +#define LK_LED_SHIFTLOCK 0x84 +#define LK_LED_SCROLLLOCK 0x88 +#define LK_CMD_LED_ON 0x13 +#define LK_CMD_LED_OFF 0x11 + +/* Mode control */ +#define LK_MODE_DOWN 0x80 +#define LK_MODE_AUTODOWN 0x82 +#define LK_MODE_UPDOWN 0x86 +#define LK_CMD_SET_MODE(mode, div) ((mode) | ((div) << 3)) + +/* Misc commands */ +#define LK_CMD_ENABLE_KEYCLICK 0x1b +#define LK_CMD_DISABLE_KEYCLICK 0x99 +#define LK_CMD_DISABLE_BELL 0xa1 +#define LK_CMD_SOUND_BELL 0xa7 +#define LK_CMD_ENABLE_BELL 0x23 +#define LK_CMD_DISABLE_CTRCLICK 0xb9 +#define LK_CMD_ENABLE_CTRCLICK 0xbb +#define LK_CMD_SET_DEFAULTS 0xd3 +#define LK_CMD_POWERCYCLE_RESET 0xfd +#define LK_CMD_ENABLE_LK401 0xe9 +#define LK_CMD_REQUEST_ID 0xab + +/* Misc responses from keyboard */ +#define LK_STUCK_KEY 0x3d +#define LK_SELFTEST_FAILED 0x3e +#define LK_ALL_KEYS_UP 0xb3 +#define LK_METRONOME 0xb4 +#define LK_OUTPUT_ERROR 0xb5 +#define LK_INPUT_ERROR 0xb6 +#define LK_KBD_LOCKED 0xb7 +#define LK_KBD_TEST_MODE_ACK 0xb8 +#define LK_PREFIX_KEY_DOWN 0xb9 +#define LK_MODE_CHANGE_ACK 0xba +#define LK_RESPONSE_RESERVED 0xbb + +#define LK_NUM_KEYCODES 256 +#define LK_NUM_IGNORE_BYTES 6 + +static unsigned short lkkbd_keycode[LK_NUM_KEYCODES] = { + [0x56] = KEY_F1, + [0x57] = KEY_F2, + [0x58] = KEY_F3, + [0x59] = KEY_F4, + [0x5a] = KEY_F5, + [0x64] = KEY_F6, + [0x65] = KEY_F7, + [0x66] = KEY_F8, + [0x67] = KEY_F9, + [0x68] = KEY_F10, + [0x71] = KEY_F11, + [0x72] = KEY_F12, + [0x73] = KEY_F13, + [0x74] = KEY_F14, + [0x7c] = KEY_F15, + [0x7d] = KEY_F16, + [0x80] = KEY_F17, + [0x81] = KEY_F18, + [0x82] = KEY_F19, + [0x83] = KEY_F20, + [0x8a] = KEY_FIND, + [0x8b] = KEY_INSERT, + [0x8c] = KEY_DELETE, + [0x8d] = KEY_SELECT, + [0x8e] = KEY_PAGEUP, + [0x8f] = KEY_PAGEDOWN, + [0x92] = KEY_KP0, + [0x94] = KEY_KPDOT, + [0x95] = KEY_KPENTER, + [0x96] = KEY_KP1, + [0x97] = KEY_KP2, + [0x98] = KEY_KP3, + [0x99] = KEY_KP4, + [0x9a] = KEY_KP5, + [0x9b] = KEY_KP6, + [0x9c] = KEY_KPCOMMA, + [0x9d] = KEY_KP7, + [0x9e] = KEY_KP8, + [0x9f] = KEY_KP9, + [0xa0] = KEY_KPMINUS, + [0xa1] = KEY_PROG1, + [0xa2] = KEY_PROG2, + [0xa3] = KEY_PROG3, + [0xa4] = KEY_PROG4, + [0xa7] = KEY_LEFT, + [0xa8] = KEY_RIGHT, + [0xa9] = KEY_DOWN, + [0xaa] = KEY_UP, + [0xab] = KEY_RIGHTSHIFT, + [0xac] = KEY_LEFTALT, + [0xad] = KEY_COMPOSE, /* Right Compose, that is. */ + [0xae] = KEY_LEFTSHIFT, /* Same as KEY_RIGHTSHIFT on LK201 */ + [0xaf] = KEY_LEFTCTRL, + [0xb0] = KEY_CAPSLOCK, + [0xb1] = KEY_COMPOSE, /* Left Compose, that is. */ + [0xb2] = KEY_RIGHTALT, + [0xbc] = KEY_BACKSPACE, + [0xbd] = KEY_ENTER, + [0xbe] = KEY_TAB, + [0xbf] = KEY_ESC, + [0xc0] = KEY_1, + [0xc1] = KEY_Q, + [0xc2] = KEY_A, + [0xc3] = KEY_Z, + [0xc5] = KEY_2, + [0xc6] = KEY_W, + [0xc7] = KEY_S, + [0xc8] = KEY_X, + [0xc9] = KEY_102ND, + [0xcb] = KEY_3, + [0xcc] = KEY_E, + [0xcd] = KEY_D, + [0xce] = KEY_C, + [0xd0] = KEY_4, + [0xd1] = KEY_R, + [0xd2] = KEY_F, + [0xd3] = KEY_V, + [0xd4] = KEY_SPACE, + [0xd6] = KEY_5, + [0xd7] = KEY_T, + [0xd8] = KEY_G, + [0xd9] = KEY_B, + [0xdb] = KEY_6, + [0xdc] = KEY_Y, + [0xdd] = KEY_H, + [0xde] = KEY_N, + [0xe0] = KEY_7, + [0xe1] = KEY_U, + [0xe2] = KEY_J, + [0xe3] = KEY_M, + [0xe5] = KEY_8, + [0xe6] = KEY_I, + [0xe7] = KEY_K, + [0xe8] = KEY_COMMA, + [0xea] = KEY_9, + [0xeb] = KEY_O, + [0xec] = KEY_L, + [0xed] = KEY_DOT, + [0xef] = KEY_0, + [0xf0] = KEY_P, + [0xf2] = KEY_SEMICOLON, + [0xf3] = KEY_SLASH, + [0xf5] = KEY_EQUAL, + [0xf6] = KEY_RIGHTBRACE, + [0xf7] = KEY_BACKSLASH, + [0xf9] = KEY_MINUS, + [0xfa] = KEY_LEFTBRACE, + [0xfb] = KEY_APOSTROPHE, +}; + +#define CHECK_LED(LK, VAR_ON, VAR_OFF, LED, BITS) do { \ + if (test_bit(LED, (LK)->dev->led)) \ + VAR_ON |= BITS; \ + else \ + VAR_OFF |= BITS; \ + } while (0) + +/* + * Per-keyboard data + */ +struct lkkbd { + unsigned short keycode[LK_NUM_KEYCODES]; + int ignore_bytes; + unsigned char id[LK_NUM_IGNORE_BYTES]; + struct input_dev *dev; + struct serio *serio; + struct work_struct tq; + char name[64]; + char phys[32]; + char type; + int bell_volume; + int keyclick_volume; + int ctrlclick_volume; +}; + +#ifdef LKKBD_DEBUG +/* + * Responses from the keyboard and mapping back to their names. + */ +static struct { + unsigned char value; + unsigned char *name; +} lk_response[] = { +#define RESPONSE(x) { .value = (x), .name = #x, } + RESPONSE(LK_STUCK_KEY), + RESPONSE(LK_SELFTEST_FAILED), + RESPONSE(LK_ALL_KEYS_UP), + RESPONSE(LK_METRONOME), + RESPONSE(LK_OUTPUT_ERROR), + RESPONSE(LK_INPUT_ERROR), + RESPONSE(LK_KBD_LOCKED), + RESPONSE(LK_KBD_TEST_MODE_ACK), + RESPONSE(LK_PREFIX_KEY_DOWN), + RESPONSE(LK_MODE_CHANGE_ACK), + RESPONSE(LK_RESPONSE_RESERVED), +#undef RESPONSE +}; + +static unsigned char *response_name(unsigned char value) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lk_response); i++) + if (lk_response[i].value == value) + return lk_response[i].name; + + return "<unknown>"; +} +#endif /* LKKBD_DEBUG */ + +/* + * Calculate volume parameter byte for a given volume. + */ +static unsigned char volume_to_hw(int volume_percent) +{ + unsigned char ret = 0; + + if (volume_percent < 0) + volume_percent = 0; + if (volume_percent > 100) + volume_percent = 100; + + if (volume_percent >= 0) + ret = 7; + if (volume_percent >= 13) /* 12.5 */ + ret = 6; + if (volume_percent >= 25) + ret = 5; + if (volume_percent >= 38) /* 37.5 */ + ret = 4; + if (volume_percent >= 50) + ret = 3; + if (volume_percent >= 63) /* 62.5 */ + ret = 2; /* This is the default volume */ + if (volume_percent >= 75) + ret = 1; + if (volume_percent >= 88) /* 87.5 */ + ret = 0; + + ret |= 0x80; + + return ret; +} + +static void lkkbd_detection_done(struct lkkbd *lk) +{ + int i; + + /* + * Reset setting for Compose key. Let Compose be KEY_COMPOSE. + */ + lk->keycode[0xb1] = KEY_COMPOSE; + + /* + * Print keyboard name and modify Compose=Alt on user's request. + */ + switch (lk->id[4]) { + case 1: + strlcpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name)); + + if (lk201_compose_is_alt) + lk->keycode[0xb1] = KEY_LEFTALT; + break; + + case 2: + strlcpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name)); + break; + + default: + strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name)); + printk(KERN_ERR + "lkkbd: keyboard on %s is unknown, please report to " + "Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys); + printk(KERN_ERR "lkkbd: keyboard ID'ed as:"); + for (i = 0; i < LK_NUM_IGNORE_BYTES; i++) + printk(" 0x%02x", lk->id[i]); + printk("\n"); + break; + } + + printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n", + lk->phys, lk->name); + + /* + * Report errors during keyboard boot-up. + */ + switch (lk->id[2]) { + case 0x00: + /* All okay */ + break; + + case LK_STUCK_KEY: + printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n", + lk->phys); + break; + + case LK_SELFTEST_FAILED: + printk(KERN_ERR + "lkkbd: Selftest failed on keyboard at %s, " + "keyboard may not work properly\n", lk->phys); + break; + + default: + printk(KERN_ERR + "lkkbd: Unknown error %02x on keyboard at %s\n", + lk->id[2], lk->phys); + break; + } + + /* + * Try to hint user if there's a stuck key. + */ + if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0) + printk(KERN_ERR + "Scancode of stuck key is 0x%02x, keycode is 0x%04x\n", + lk->id[3], lk->keycode[lk->id[3]]); +} + +/* + * lkkbd_interrupt() is called by the low level driver when a character + * is received. + */ +static irqreturn_t lkkbd_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct lkkbd *lk = serio_get_drvdata(serio); + struct input_dev *input_dev = lk->dev; + unsigned int keycode; + int i; + + DBG(KERN_INFO "Got byte 0x%02x\n", data); + + if (lk->ignore_bytes > 0) { + DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name); + lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; + + if (lk->ignore_bytes == 0) + lkkbd_detection_done(lk); + + return IRQ_HANDLED; + } + + switch (data) { + case LK_ALL_KEYS_UP: + for (i = 0; i < ARRAY_SIZE(lkkbd_keycode); i++) + input_report_key(input_dev, lk->keycode[i], 0); + input_sync(input_dev); + break; + + case 0x01: + DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n"); + lk->ignore_bytes = LK_NUM_IGNORE_BYTES; + lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; + schedule_work(&lk->tq); + break; + + case LK_METRONOME: + case LK_OUTPUT_ERROR: + case LK_INPUT_ERROR: + case LK_KBD_LOCKED: + case LK_KBD_TEST_MODE_ACK: + case LK_PREFIX_KEY_DOWN: + case LK_MODE_CHANGE_ACK: + case LK_RESPONSE_RESERVED: + DBG(KERN_INFO "Got %s and don't know how to handle...\n", + response_name(data)); + break; + + default: + keycode = lk->keycode[data]; + if (keycode != KEY_RESERVED) { + input_report_key(input_dev, keycode, + !test_bit(keycode, input_dev->key)); + input_sync(input_dev); + } else { + printk(KERN_WARNING + "%s: Unknown key with scancode 0x%02x on %s.\n", + __FILE__, data, lk->name); + } + } + + return IRQ_HANDLED; +} + +static void lkkbd_toggle_leds(struct lkkbd *lk) +{ + struct serio *serio = lk->serio; + unsigned char leds_on = 0; + unsigned char leds_off = 0; + + CHECK_LED(lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK); + CHECK_LED(lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE); + CHECK_LED(lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK); + CHECK_LED(lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT); + if (leds_on != 0) { + serio_write(serio, LK_CMD_LED_ON); + serio_write(serio, leds_on); + } + if (leds_off != 0) { + serio_write(serio, LK_CMD_LED_OFF); + serio_write(serio, leds_off); + } +} + +static void lkkbd_toggle_keyclick(struct lkkbd *lk, bool on) +{ + struct serio *serio = lk->serio; + + if (on) { + DBG("%s: Activating key clicks\n", __func__); + serio_write(serio, LK_CMD_ENABLE_KEYCLICK); + serio_write(serio, volume_to_hw(lk->keyclick_volume)); + serio_write(serio, LK_CMD_ENABLE_CTRCLICK); + serio_write(serio, volume_to_hw(lk->ctrlclick_volume)); + } else { + DBG("%s: Deactivating key clicks\n", __func__); + serio_write(serio, LK_CMD_DISABLE_KEYCLICK); + serio_write(serio, LK_CMD_DISABLE_CTRCLICK); + } + +} + +/* + * lkkbd_event() handles events from the input module. + */ +static int lkkbd_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) +{ + struct lkkbd *lk = input_get_drvdata(dev); + + switch (type) { + case EV_LED: + lkkbd_toggle_leds(lk); + return 0; + + case EV_SND: + switch (code) { + case SND_CLICK: + lkkbd_toggle_keyclick(lk, value); + return 0; + + case SND_BELL: + if (value != 0) + serio_write(lk->serio, LK_CMD_SOUND_BELL); + + return 0; + } + + break; + + default: + printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n", + __func__, type, code, value); + } + + return -1; +} + +/* + * lkkbd_reinit() sets leds and beeps to a state the computer remembers they + * were in. + */ +static void lkkbd_reinit(struct work_struct *work) +{ + struct lkkbd *lk = container_of(work, struct lkkbd, tq); + int division; + + /* Ask for ID */ + serio_write(lk->serio, LK_CMD_REQUEST_ID); + + /* Reset parameters */ + serio_write(lk->serio, LK_CMD_SET_DEFAULTS); + + /* Set LEDs */ + lkkbd_toggle_leds(lk); + + /* + * Try to activate extended LK401 mode. This command will + * only work with a LK401 keyboard and grants access to + * LAlt, RAlt, RCompose and RShift. + */ + serio_write(lk->serio, LK_CMD_ENABLE_LK401); + + /* Set all keys to UPDOWN mode */ + for (division = 1; division <= 14; division++) + serio_write(lk->serio, + LK_CMD_SET_MODE(LK_MODE_UPDOWN, division)); + + /* Enable bell and set volume */ + serio_write(lk->serio, LK_CMD_ENABLE_BELL); + serio_write(lk->serio, volume_to_hw(lk->bell_volume)); + + /* Enable/disable keyclick (and possibly set volume) */ + lkkbd_toggle_keyclick(lk, test_bit(SND_CLICK, lk->dev->snd)); + + /* Sound the bell if needed */ + if (test_bit(SND_BELL, lk->dev->snd)) + serio_write(lk->serio, LK_CMD_SOUND_BELL); +} + +/* + * lkkbd_connect() probes for a LK keyboard and fills the necessary structures. + */ +static int lkkbd_connect(struct serio *serio, struct serio_driver *drv) +{ + struct lkkbd *lk; + struct input_dev *input_dev; + int i; + int err; + + lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!lk || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + lk->serio = serio; + lk->dev = input_dev; + INIT_WORK(&lk->tq, lkkbd_reinit); + lk->bell_volume = bell_volume; + lk->keyclick_volume = keyclick_volume; + lk->ctrlclick_volume = ctrlclick_volume; + memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode)); + + strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name)); + snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys); + + input_dev->name = lk->name; + input_dev->phys = lk->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_LKKBD; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->event = lkkbd_event; + + input_set_drvdata(input_dev, lk); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_LED, input_dev->evbit); + __set_bit(EV_SND, input_dev->evbit); + __set_bit(EV_REP, input_dev->evbit); + __set_bit(LED_CAPSL, input_dev->ledbit); + __set_bit(LED_SLEEP, input_dev->ledbit); + __set_bit(LED_COMPOSE, input_dev->ledbit); + __set_bit(LED_SCROLLL, input_dev->ledbit); + __set_bit(SND_BELL, input_dev->sndbit); + __set_bit(SND_CLICK, input_dev->sndbit); + + input_dev->keycode = lk->keycode; + input_dev->keycodesize = sizeof(lk->keycode[0]); + input_dev->keycodemax = ARRAY_SIZE(lk->keycode); + + for (i = 0; i < LK_NUM_KEYCODES; i++) + __set_bit(lk->keycode[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); + + serio_set_drvdata(serio, lk); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(lk->dev); + if (err) + goto fail3; + + serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET); + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(lk); + return err; +} + +/* + * lkkbd_disconnect() unregisters and closes behind us. + */ +static void lkkbd_disconnect(struct serio *serio) +{ + struct lkkbd *lk = serio_get_drvdata(serio); + + input_get_device(lk->dev); + input_unregister_device(lk->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(lk->dev); + kfree(lk); +} + +static const struct serio_device_id lkkbd_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_LKKBD, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, lkkbd_serio_ids); + +static struct serio_driver lkkbd_drv = { + .driver = { + .name = "lkkbd", + }, + .description = DRIVER_DESC, + .id_table = lkkbd_serio_ids, + .connect = lkkbd_connect, + .disconnect = lkkbd_disconnect, + .interrupt = lkkbd_interrupt, +}; + +module_serio_driver(lkkbd_drv); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c new file mode 100644 index 000000000..04a5d7e13 --- /dev/null +++ b/drivers/input/keyboard/lm8323.c @@ -0,0 +1,859 @@ +/* + * drivers/i2c/chips/lm8323.c + * + * Copyright (C) 2007-2009 Nokia Corporation + * + * Written by Daniel Stone <daniel.stone@nokia.com> + * Timo O. Karjalainen <timo.o.karjalainen@nokia.com> + * + * Updated by Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation (version 2 of the License only). + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/platform_data/lm8323.h> +#include <linux/pm.h> +#include <linux/slab.h> + +/* Commands to send to the chip. */ +#define LM8323_CMD_READ_ID 0x80 /* Read chip ID. */ +#define LM8323_CMD_WRITE_CFG 0x81 /* Set configuration item. */ +#define LM8323_CMD_READ_INT 0x82 /* Get interrupt status. */ +#define LM8323_CMD_RESET 0x83 /* Reset, same as external one */ +#define LM8323_CMD_WRITE_PORT_SEL 0x85 /* Set GPIO in/out. */ +#define LM8323_CMD_WRITE_PORT_STATE 0x86 /* Set GPIO pullup. */ +#define LM8323_CMD_READ_PORT_SEL 0x87 /* Get GPIO in/out. */ +#define LM8323_CMD_READ_PORT_STATE 0x88 /* Get GPIO pullup. */ +#define LM8323_CMD_READ_FIFO 0x89 /* Read byte from FIFO. */ +#define LM8323_CMD_RPT_READ_FIFO 0x8a /* Read FIFO (no increment). */ +#define LM8323_CMD_SET_ACTIVE 0x8b /* Set active time. */ +#define LM8323_CMD_READ_ERR 0x8c /* Get error status. */ +#define LM8323_CMD_READ_ROTATOR 0x8e /* Read rotator status. */ +#define LM8323_CMD_SET_DEBOUNCE 0x8f /* Set debouncing time. */ +#define LM8323_CMD_SET_KEY_SIZE 0x90 /* Set keypad size. */ +#define LM8323_CMD_READ_KEY_SIZE 0x91 /* Get keypad size. */ +#define LM8323_CMD_READ_CFG 0x92 /* Get configuration item. */ +#define LM8323_CMD_WRITE_CLOCK 0x93 /* Set clock config. */ +#define LM8323_CMD_READ_CLOCK 0x94 /* Get clock config. */ +#define LM8323_CMD_PWM_WRITE 0x95 /* Write PWM script. */ +#define LM8323_CMD_START_PWM 0x96 /* Start PWM engine. */ +#define LM8323_CMD_STOP_PWM 0x97 /* Stop PWM engine. */ + +/* Interrupt status. */ +#define INT_KEYPAD 0x01 /* Key event. */ +#define INT_ROTATOR 0x02 /* Rotator event. */ +#define INT_ERROR 0x08 /* Error: use CMD_READ_ERR. */ +#define INT_NOINIT 0x10 /* Lost configuration. */ +#define INT_PWM1 0x20 /* PWM1 stopped. */ +#define INT_PWM2 0x40 /* PWM2 stopped. */ +#define INT_PWM3 0x80 /* PWM3 stopped. */ + +/* Errors (signalled by INT_ERROR, read with CMD_READ_ERR). */ +#define ERR_BADPAR 0x01 /* Bad parameter. */ +#define ERR_CMDUNK 0x02 /* Unknown command. */ +#define ERR_KEYOVR 0x04 /* Too many keys pressed. */ +#define ERR_FIFOOVER 0x40 /* FIFO overflow. */ + +/* Configuration keys (CMD_{WRITE,READ}_CFG). */ +#define CFG_MUX1SEL 0x01 /* Select MUX1_OUT input. */ +#define CFG_MUX1EN 0x02 /* Enable MUX1_OUT. */ +#define CFG_MUX2SEL 0x04 /* Select MUX2_OUT input. */ +#define CFG_MUX2EN 0x08 /* Enable MUX2_OUT. */ +#define CFG_PSIZE 0x20 /* Package size (must be 0). */ +#define CFG_ROTEN 0x40 /* Enable rotator. */ + +/* Clock settings (CMD_{WRITE,READ}_CLOCK). */ +#define CLK_RCPWM_INTERNAL 0x00 +#define CLK_RCPWM_EXTERNAL 0x03 +#define CLK_SLOWCLKEN 0x08 /* Enable 32.768kHz clock. */ +#define CLK_SLOWCLKOUT 0x40 /* Enable slow pulse output. */ + +/* The possible addresses corresponding to CONFIG1 and CONFIG2 pin wirings. */ +#define LM8323_I2C_ADDR00 (0x84 >> 1) /* 1000 010x */ +#define LM8323_I2C_ADDR01 (0x86 >> 1) /* 1000 011x */ +#define LM8323_I2C_ADDR10 (0x88 >> 1) /* 1000 100x */ +#define LM8323_I2C_ADDR11 (0x8A >> 1) /* 1000 101x */ + +/* Key event fifo length */ +#define LM8323_FIFO_LEN 15 + +/* Commands for PWM engine; feed in with PWM_WRITE. */ +/* Load ramp counter from duty cycle field (range 0 - 0xff). */ +#define PWM_SET(v) (0x4000 | ((v) & 0xff)) +/* Go to start of script. */ +#define PWM_GOTOSTART 0x0000 +/* + * Stop engine (generates interrupt). If reset is 1, clear the program + * counter, else leave it. + */ +#define PWM_END(reset) (0xc000 | (!!(reset) << 11)) +/* + * Ramp. If s is 1, divide clock by 512, else divide clock by 16. + * Take t clock scales (up to 63) per step, for n steps (up to 126). + * If u is set, ramp up, else ramp down. + */ +#define PWM_RAMP(s, t, n, u) ((!!(s) << 14) | ((t) & 0x3f) << 8 | \ + ((n) & 0x7f) | ((u) ? 0 : 0x80)) +/* + * Loop (i.e. jump back to pos) for a given number of iterations (up to 63). + * If cnt is zero, execute until PWM_END is encountered. + */ +#define PWM_LOOP(cnt, pos) (0xa000 | (((cnt) & 0x3f) << 7) | \ + ((pos) & 0x3f)) +/* + * Wait for trigger. Argument is a mask of channels, shifted by the channel + * number, e.g. 0xa for channels 3 and 1. Note that channels are numbered + * from 1, not 0. + */ +#define PWM_WAIT_TRIG(chans) (0xe000 | (((chans) & 0x7) << 6)) +/* Send trigger. Argument is same as PWM_WAIT_TRIG. */ +#define PWM_SEND_TRIG(chans) (0xe000 | ((chans) & 0x7)) + +struct lm8323_pwm { + int id; + int fade_time; + int brightness; + int desired_brightness; + bool enabled; + bool running; + /* pwm lock */ + struct mutex lock; + struct work_struct work; + struct led_classdev cdev; + struct lm8323_chip *chip; +}; + +struct lm8323_chip { + /* device lock */ + struct mutex lock; + struct i2c_client *client; + struct input_dev *idev; + bool kp_enabled; + bool pm_suspend; + unsigned keys_down; + char phys[32]; + unsigned short keymap[LM8323_KEYMAP_SIZE]; + int size_x; + int size_y; + int debounce_time; + int active_time; + struct lm8323_pwm pwm[LM8323_NUM_PWMS]; +}; + +#define client_to_lm8323(c) container_of(c, struct lm8323_chip, client) +#define dev_to_lm8323(d) container_of(d, struct lm8323_chip, client->dev) +#define cdev_to_pwm(c) container_of(c, struct lm8323_pwm, cdev) +#define work_to_pwm(w) container_of(w, struct lm8323_pwm, work) + +#define LM8323_MAX_DATA 8 + +/* + * To write, we just access the chip's address in write mode, and dump the + * command and data out on the bus. The command byte and data are taken as + * sequential u8s out of varargs, to a maximum of LM8323_MAX_DATA. + */ +static int lm8323_write(struct lm8323_chip *lm, int len, ...) +{ + int ret, i; + va_list ap; + u8 data[LM8323_MAX_DATA]; + + va_start(ap, len); + + if (unlikely(len > LM8323_MAX_DATA)) { + dev_err(&lm->client->dev, "tried to send %d bytes\n", len); + va_end(ap); + return 0; + } + + for (i = 0; i < len; i++) + data[i] = va_arg(ap, int); + + va_end(ap); + + /* + * If the host is asleep while we send the data, we can get a NACK + * back while it wakes up, so try again, once. + */ + ret = i2c_master_send(lm->client, data, len); + if (unlikely(ret == -EREMOTEIO)) + ret = i2c_master_send(lm->client, data, len); + if (unlikely(ret != len)) + dev_err(&lm->client->dev, "sent %d bytes of %d total\n", + len, ret); + + return ret; +} + +/* + * To read, we first send the command byte to the chip and end the transaction, + * then access the chip in read mode, at which point it will send the data. + */ +static int lm8323_read(struct lm8323_chip *lm, u8 cmd, u8 *buf, int len) +{ + int ret; + + /* + * If the host is asleep while we send the byte, we can get a NACK + * back while it wakes up, so try again, once. + */ + ret = i2c_master_send(lm->client, &cmd, 1); + if (unlikely(ret == -EREMOTEIO)) + ret = i2c_master_send(lm->client, &cmd, 1); + if (unlikely(ret != 1)) { + dev_err(&lm->client->dev, "sending read cmd 0x%02x failed\n", + cmd); + return 0; + } + + ret = i2c_master_recv(lm->client, buf, len); + if (unlikely(ret != len)) + dev_err(&lm->client->dev, "wanted %d bytes, got %d\n", + len, ret); + + return ret; +} + +/* + * Set the chip active time (idle time before it enters halt). + */ +static void lm8323_set_active_time(struct lm8323_chip *lm, int time) +{ + lm8323_write(lm, 2, LM8323_CMD_SET_ACTIVE, time >> 2); +} + +/* + * The signals are AT-style: the low 7 bits are the keycode, and the top + * bit indicates the state (1 for down, 0 for up). + */ +static inline u8 lm8323_whichkey(u8 event) +{ + return event & 0x7f; +} + +static inline int lm8323_ispress(u8 event) +{ + return (event & 0x80) ? 1 : 0; +} + +static void process_keys(struct lm8323_chip *lm) +{ + u8 event; + u8 key_fifo[LM8323_FIFO_LEN + 1]; + int old_keys_down = lm->keys_down; + int ret; + int i = 0; + + /* + * Read all key events from the FIFO at once. Next READ_FIFO clears the + * FIFO even if we didn't read all events previously. + */ + ret = lm8323_read(lm, LM8323_CMD_READ_FIFO, key_fifo, LM8323_FIFO_LEN); + + if (ret < 0) { + dev_err(&lm->client->dev, "Failed reading fifo \n"); + return; + } + key_fifo[ret] = 0; + + while ((event = key_fifo[i++])) { + u8 key = lm8323_whichkey(event); + int isdown = lm8323_ispress(event); + unsigned short keycode = lm->keymap[key]; + + dev_vdbg(&lm->client->dev, "key 0x%02x %s\n", + key, isdown ? "down" : "up"); + + if (lm->kp_enabled) { + input_event(lm->idev, EV_MSC, MSC_SCAN, key); + input_report_key(lm->idev, keycode, isdown); + input_sync(lm->idev); + } + + if (isdown) + lm->keys_down++; + else + lm->keys_down--; + } + + /* + * Errata: We need to ensure that the chip never enters halt mode + * during a keypress, so set active time to 0. When it's released, + * we can enter halt again, so set the active time back to normal. + */ + if (!old_keys_down && lm->keys_down) + lm8323_set_active_time(lm, 0); + if (old_keys_down && !lm->keys_down) + lm8323_set_active_time(lm, lm->active_time); +} + +static void lm8323_process_error(struct lm8323_chip *lm) +{ + u8 error; + + if (lm8323_read(lm, LM8323_CMD_READ_ERR, &error, 1) == 1) { + if (error & ERR_FIFOOVER) + dev_vdbg(&lm->client->dev, "fifo overflow!\n"); + if (error & ERR_KEYOVR) + dev_vdbg(&lm->client->dev, + "more than two keys pressed\n"); + if (error & ERR_CMDUNK) + dev_vdbg(&lm->client->dev, + "unknown command submitted\n"); + if (error & ERR_BADPAR) + dev_vdbg(&lm->client->dev, "bad command parameter\n"); + } +} + +static void lm8323_reset(struct lm8323_chip *lm) +{ + /* The docs say we must pass 0xAA as the data byte. */ + lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA); +} + +static int lm8323_configure(struct lm8323_chip *lm) +{ + int keysize = (lm->size_x << 4) | lm->size_y; + int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL); + int debounce = lm->debounce_time >> 2; + int active = lm->active_time >> 2; + + /* + * Active time must be greater than the debounce time: if it's + * a close-run thing, give ourselves a 12ms buffer. + */ + if (debounce >= active) + active = debounce + 3; + + lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0); + lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock); + lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize); + lm8323_set_active_time(lm, lm->active_time); + lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce); + lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff); + lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0); + + /* + * Not much we can do about errors at this point, so just hope + * for the best. + */ + + return 0; +} + +static void pwm_done(struct lm8323_pwm *pwm) +{ + mutex_lock(&pwm->lock); + pwm->running = false; + if (pwm->desired_brightness != pwm->brightness) + schedule_work(&pwm->work); + mutex_unlock(&pwm->lock); +} + +/* + * Bottom half: handle the interrupt by posting key events, or dealing with + * errors appropriately. + */ +static irqreturn_t lm8323_irq(int irq, void *_lm) +{ + struct lm8323_chip *lm = _lm; + u8 ints; + int i; + + mutex_lock(&lm->lock); + + while ((lm8323_read(lm, LM8323_CMD_READ_INT, &ints, 1) == 1) && ints) { + if (likely(ints & INT_KEYPAD)) + process_keys(lm); + if (ints & INT_ROTATOR) { + /* We don't currently support the rotator. */ + dev_vdbg(&lm->client->dev, "rotator fired\n"); + } + if (ints & INT_ERROR) { + dev_vdbg(&lm->client->dev, "error!\n"); + lm8323_process_error(lm); + } + if (ints & INT_NOINIT) { + dev_err(&lm->client->dev, "chip lost config; " + "reinitialising\n"); + lm8323_configure(lm); + } + for (i = 0; i < LM8323_NUM_PWMS; i++) { + if (ints & (INT_PWM1 << i)) { + dev_vdbg(&lm->client->dev, + "pwm%d engine completed\n", i); + pwm_done(&lm->pwm[i]); + } + } + } + + mutex_unlock(&lm->lock); + + return IRQ_HANDLED; +} + +/* + * Read the chip ID. + */ +static int lm8323_read_id(struct lm8323_chip *lm, u8 *buf) +{ + int bytes; + + bytes = lm8323_read(lm, LM8323_CMD_READ_ID, buf, 2); + if (unlikely(bytes != 2)) + return -EIO; + + return 0; +} + +static void lm8323_write_pwm_one(struct lm8323_pwm *pwm, int pos, u16 cmd) +{ + lm8323_write(pwm->chip, 4, LM8323_CMD_PWM_WRITE, (pos << 2) | pwm->id, + (cmd & 0xff00) >> 8, cmd & 0x00ff); +} + +/* + * Write a script into a given PWM engine, concluding with PWM_END. + * If 'kill' is nonzero, the engine will be shut down at the end + * of the script, producing a zero output. Otherwise the engine + * will be kept running at the final PWM level indefinitely. + */ +static void lm8323_write_pwm(struct lm8323_pwm *pwm, int kill, + int len, const u16 *cmds) +{ + int i; + + for (i = 0; i < len; i++) + lm8323_write_pwm_one(pwm, i, cmds[i]); + + lm8323_write_pwm_one(pwm, i++, PWM_END(kill)); + lm8323_write(pwm->chip, 2, LM8323_CMD_START_PWM, pwm->id); + pwm->running = true; +} + +static void lm8323_pwm_work(struct work_struct *work) +{ + struct lm8323_pwm *pwm = work_to_pwm(work); + int div512, perstep, steps, hz, up, kill; + u16 pwm_cmds[3]; + int num_cmds = 0; + + mutex_lock(&pwm->lock); + + /* + * Do nothing if we're already at the requested level, + * or previous setting is not yet complete. In the latter + * case we will be called again when the previous PWM script + * finishes. + */ + if (pwm->running || pwm->desired_brightness == pwm->brightness) + goto out; + + kill = (pwm->desired_brightness == 0); + up = (pwm->desired_brightness > pwm->brightness); + steps = abs(pwm->desired_brightness - pwm->brightness); + + /* + * Convert time (in ms) into a divisor (512 or 16 on a refclk of + * 32768Hz), and number of ticks per step. + */ + if ((pwm->fade_time / steps) > (32768 / 512)) { + div512 = 1; + hz = 32768 / 512; + } else { + div512 = 0; + hz = 32768 / 16; + } + + perstep = (hz * pwm->fade_time) / (steps * 1000); + + if (perstep == 0) + perstep = 1; + else if (perstep > 63) + perstep = 63; + + while (steps) { + int s; + + s = min(126, steps); + pwm_cmds[num_cmds++] = PWM_RAMP(div512, perstep, s, up); + steps -= s; + } + + lm8323_write_pwm(pwm, kill, num_cmds, pwm_cmds); + pwm->brightness = pwm->desired_brightness; + + out: + mutex_unlock(&pwm->lock); +} + +static void lm8323_pwm_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + struct lm8323_chip *lm = pwm->chip; + + mutex_lock(&pwm->lock); + pwm->desired_brightness = brightness; + mutex_unlock(&pwm->lock); + + if (in_interrupt()) { + schedule_work(&pwm->work); + } else { + /* + * Schedule PWM work as usual unless we are going into suspend + */ + mutex_lock(&lm->lock); + if (likely(!lm->pm_suspend)) + schedule_work(&pwm->work); + else + lm8323_pwm_work(&pwm->work); + mutex_unlock(&lm->lock); + } +} + +static ssize_t lm8323_pwm_show_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + + return sprintf(buf, "%d\n", pwm->fade_time); +} + +static ssize_t lm8323_pwm_store_time(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + int ret, time; + + ret = kstrtoint(buf, 10, &time); + /* Numbers only, please. */ + if (ret) + return ret; + + pwm->fade_time = time; + + return strlen(buf); +} +static DEVICE_ATTR(time, 0644, lm8323_pwm_show_time, lm8323_pwm_store_time); + +static struct attribute *lm8323_pwm_attrs[] = { + &dev_attr_time.attr, + NULL +}; +ATTRIBUTE_GROUPS(lm8323_pwm); + +static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev, + const char *name) +{ + struct lm8323_pwm *pwm; + + BUG_ON(id > 3); + + pwm = &lm->pwm[id - 1]; + + pwm->id = id; + pwm->fade_time = 0; + pwm->brightness = 0; + pwm->desired_brightness = 0; + pwm->running = false; + pwm->enabled = false; + INIT_WORK(&pwm->work, lm8323_pwm_work); + mutex_init(&pwm->lock); + pwm->chip = lm; + + if (name) { + pwm->cdev.name = name; + pwm->cdev.brightness_set = lm8323_pwm_set_brightness; + pwm->cdev.groups = lm8323_pwm_groups; + if (led_classdev_register(dev, &pwm->cdev) < 0) { + dev_err(dev, "couldn't register PWM %d\n", id); + return -1; + } + pwm->enabled = true; + } + + return 0; +} + +static struct i2c_driver lm8323_i2c_driver; + +static ssize_t lm8323_show_disable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm8323_chip *lm = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", !lm->kp_enabled); +} + +static ssize_t lm8323_set_disable(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct lm8323_chip *lm = dev_get_drvdata(dev); + int ret; + unsigned int i; + + ret = kstrtouint(buf, 10, &i); + if (ret) + return ret; + + mutex_lock(&lm->lock); + lm->kp_enabled = !i; + mutex_unlock(&lm->lock); + + return count; +} +static DEVICE_ATTR(disable_kp, 0644, lm8323_show_disable, lm8323_set_disable); + +static int lm8323_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm8323_platform_data *pdata = dev_get_platdata(&client->dev); + struct input_dev *idev; + struct lm8323_chip *lm; + int pwm; + int i, err; + unsigned long tmo; + u8 data[2]; + + if (!pdata || !pdata->size_x || !pdata->size_y) { + dev_err(&client->dev, "missing platform_data\n"); + return -EINVAL; + } + + if (pdata->size_x > 8) { + dev_err(&client->dev, "invalid x size %d specified\n", + pdata->size_x); + return -EINVAL; + } + + if (pdata->size_y > 12) { + dev_err(&client->dev, "invalid y size %d specified\n", + pdata->size_y); + return -EINVAL; + } + + lm = kzalloc(sizeof *lm, GFP_KERNEL); + idev = input_allocate_device(); + if (!lm || !idev) { + err = -ENOMEM; + goto fail1; + } + + lm->client = client; + lm->idev = idev; + mutex_init(&lm->lock); + + lm->size_x = pdata->size_x; + lm->size_y = pdata->size_y; + dev_vdbg(&client->dev, "Keypad size: %d x %d\n", + lm->size_x, lm->size_y); + + lm->debounce_time = pdata->debounce_time; + lm->active_time = pdata->active_time; + + lm8323_reset(lm); + + /* Nothing's set up to service the IRQ yet, so just spin for max. + * 100ms until we can configure. */ + tmo = jiffies + msecs_to_jiffies(100); + while (lm8323_read(lm, LM8323_CMD_READ_INT, data, 1) == 1) { + if (data[0] & INT_NOINIT) + break; + + if (time_after(jiffies, tmo)) { + dev_err(&client->dev, + "timeout waiting for initialisation\n"); + break; + } + + msleep(1); + } + + lm8323_configure(lm); + + /* If a true probe check the device */ + if (lm8323_read_id(lm, data) != 0) { + dev_err(&client->dev, "device not found\n"); + err = -ENODEV; + goto fail1; + } + + for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) { + err = init_pwm(lm, pwm + 1, &client->dev, + pdata->pwm_names[pwm]); + if (err < 0) + goto fail2; + } + + lm->kp_enabled = true; + err = device_create_file(&client->dev, &dev_attr_disable_kp); + if (err < 0) + goto fail2; + + idev->name = pdata->name ? : "LM8323 keypad"; + snprintf(lm->phys, sizeof(lm->phys), + "%s/input-kp", dev_name(&client->dev)); + idev->phys = lm->phys; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_MSC); + __set_bit(MSC_SCAN, idev->mscbit); + for (i = 0; i < LM8323_KEYMAP_SIZE; i++) { + __set_bit(pdata->keymap[i], idev->keybit); + lm->keymap[i] = pdata->keymap[i]; + } + __clear_bit(KEY_RESERVED, idev->keybit); + + if (pdata->repeat) + __set_bit(EV_REP, idev->evbit); + + err = input_register_device(idev); + if (err) { + dev_dbg(&client->dev, "error registering input device\n"); + goto fail3; + } + + err = request_threaded_irq(client->irq, NULL, lm8323_irq, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, "lm8323", lm); + if (err) { + dev_err(&client->dev, "could not get IRQ %d\n", client->irq); + goto fail4; + } + + i2c_set_clientdata(client, lm); + + device_init_wakeup(&client->dev, 1); + enable_irq_wake(client->irq); + + return 0; + +fail4: + input_unregister_device(idev); + idev = NULL; +fail3: + device_remove_file(&client->dev, &dev_attr_disable_kp); +fail2: + while (--pwm >= 0) + if (lm->pwm[pwm].enabled) + led_classdev_unregister(&lm->pwm[pwm].cdev); +fail1: + input_free_device(idev); + kfree(lm); + return err; +} + +static int lm8323_remove(struct i2c_client *client) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + disable_irq_wake(client->irq); + free_irq(client->irq, lm); + + input_unregister_device(lm->idev); + + device_remove_file(&lm->client->dev, &dev_attr_disable_kp); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_unregister(&lm->pwm[i].cdev); + + kfree(lm); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +/* + * We don't need to explicitly suspend the chip, as it already switches off + * when there's no activity. + */ +static int lm8323_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + irq_set_irq_wake(client->irq, 0); + disable_irq(client->irq); + + mutex_lock(&lm->lock); + lm->pm_suspend = true; + mutex_unlock(&lm->lock); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_suspend(&lm->pwm[i].cdev); + + return 0; +} + +static int lm8323_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + mutex_lock(&lm->lock); + lm->pm_suspend = false; + mutex_unlock(&lm->lock); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_resume(&lm->pwm[i].cdev); + + enable_irq(client->irq); + irq_set_irq_wake(client->irq, 1); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(lm8323_pm_ops, lm8323_suspend, lm8323_resume); + +static const struct i2c_device_id lm8323_id[] = { + { "lm8323", 0 }, + { } +}; + +static struct i2c_driver lm8323_i2c_driver = { + .driver = { + .name = "lm8323", + .pm = &lm8323_pm_ops, + }, + .probe = lm8323_probe, + .remove = lm8323_remove, + .id_table = lm8323_id, +}; +MODULE_DEVICE_TABLE(i2c, lm8323_id); + +module_i2c_driver(lm8323_i2c_driver); + +MODULE_AUTHOR("Timo O. Karjalainen <timo.o.karjalainen@nokia.com>"); +MODULE_AUTHOR("Daniel Stone"); +MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); +MODULE_DESCRIPTION("LM8323 keypad driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c new file mode 100644 index 000000000..c717e8f3c --- /dev/null +++ b/drivers/input/keyboard/lm8333.c @@ -0,0 +1,235 @@ +/* + * LM8333 keypad driver + * Copyright (C) 2012 Wolfram Sang, Pengutronix <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input/matrix_keypad.h> +#include <linux/input/lm8333.h> + +#define LM8333_FIFO_READ 0x20 +#define LM8333_DEBOUNCE 0x22 +#define LM8333_READ_INT 0xD0 +#define LM8333_ACTIVE 0xE4 +#define LM8333_READ_ERROR 0xF0 + +#define LM8333_KEYPAD_IRQ (1 << 0) +#define LM8333_ERROR_IRQ (1 << 3) + +#define LM8333_ERROR_KEYOVR 0x04 +#define LM8333_ERROR_FIFOOVR 0x40 + +#define LM8333_FIFO_TRANSFER_SIZE 16 + +#define LM8333_NUM_ROWS 8 +#define LM8333_NUM_COLS 16 +#define LM8333_ROW_SHIFT 4 + +struct lm8333 { + struct i2c_client *client; + struct input_dev *input; + unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT]; +}; + +/* The accessors try twice because the first access may be needed for wakeup */ +#define LM8333_READ_RETRIES 2 + +int lm8333_read8(struct lm8333 *lm8333, u8 cmd) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_read_byte_data(lm8333->client, cmd); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_read_i2c_block_data(lm8333->client, + cmd, len, buf); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +static void lm8333_key_handler(struct lm8333 *lm8333) +{ + struct input_dev *input = lm8333->input; + u8 keys[LM8333_FIFO_TRANSFER_SIZE]; + u8 code, pressed; + int i, ret; + + ret = lm8333_read_block(lm8333, LM8333_FIFO_READ, + LM8333_FIFO_TRANSFER_SIZE, keys); + if (ret != LM8333_FIFO_TRANSFER_SIZE) { + dev_err(&lm8333->client->dev, + "Error %d while reading FIFO\n", ret); + return; + } + + for (i = 0; i < LM8333_FIFO_TRANSFER_SIZE && keys[i]; i++) { + pressed = keys[i] & 0x80; + code = keys[i] & 0x7f; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, lm8333->keycodes[code], pressed); + } + + input_sync(input); +} + +static irqreturn_t lm8333_irq_thread(int irq, void *data) +{ + struct lm8333 *lm8333 = data; + u8 status = lm8333_read8(lm8333, LM8333_READ_INT); + + if (!status) + return IRQ_NONE; + + if (status & LM8333_ERROR_IRQ) { + u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR); + + if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) { + u8 dummy[LM8333_FIFO_TRANSFER_SIZE]; + + lm8333_read_block(lm8333, LM8333_FIFO_READ, + LM8333_FIFO_TRANSFER_SIZE, dummy); + } + dev_err(&lm8333->client->dev, "Got error %02x\n", err); + } + + if (status & LM8333_KEYPAD_IRQ) + lm8333_key_handler(lm8333); + + return IRQ_HANDLED; +} + +static int lm8333_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct lm8333_platform_data *pdata = + dev_get_platdata(&client->dev); + struct lm8333 *lm8333; + struct input_dev *input; + int err, active_time; + + if (!pdata) + return -EINVAL; + + active_time = pdata->active_time ?: 500; + if (active_time / 3 <= pdata->debounce_time / 3) { + dev_err(&client->dev, "Active time not big enough!\n"); + return -EINVAL; + } + + lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL); + input = input_allocate_device(); + if (!lm8333 || !input) { + err = -ENOMEM; + goto free_mem; + } + + lm8333->client = client; + lm8333->input = input; + + input->name = client->name; + input->dev.parent = &client->dev; + input->id.bustype = BUS_I2C; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + err = matrix_keypad_build_keymap(pdata->matrix_data, NULL, + LM8333_NUM_ROWS, LM8333_NUM_COLS, + lm8333->keycodes, input); + if (err) + goto free_mem; + + if (pdata->debounce_time) { + err = lm8333_write8(lm8333, LM8333_DEBOUNCE, + pdata->debounce_time / 3); + if (err) + dev_warn(&client->dev, "Unable to set debounce time\n"); + } + + if (pdata->active_time) { + err = lm8333_write8(lm8333, LM8333_ACTIVE, + pdata->active_time / 3); + if (err) + dev_warn(&client->dev, "Unable to set active time\n"); + } + + err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lm8333", lm8333); + if (err) + goto free_mem; + + err = input_register_device(input); + if (err) + goto free_irq; + + i2c_set_clientdata(client, lm8333); + return 0; + + free_irq: + free_irq(client->irq, lm8333); + free_mem: + input_free_device(input); + kfree(lm8333); + return err; +} + +static int lm8333_remove(struct i2c_client *client) +{ + struct lm8333 *lm8333 = i2c_get_clientdata(client); + + free_irq(client->irq, lm8333); + input_unregister_device(lm8333->input); + kfree(lm8333); + + return 0; +} + +static const struct i2c_device_id lm8333_id[] = { + { "lm8333", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm8333_id); + +static struct i2c_driver lm8333_driver = { + .driver = { + .name = "lm8333", + }, + .probe = lm8333_probe, + .remove = lm8333_remove, + .id_table = lm8333_id, +}; +module_i2c_driver(lm8333_driver); + +MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); +MODULE_DESCRIPTION("LM8333 keyboard driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c new file mode 100644 index 000000000..30d610758 --- /dev/null +++ b/drivers/input/keyboard/locomokbd.c @@ -0,0 +1,360 @@ +/* + * LoCoMo keyboard driver for Linux-based ARM PDAs: + * - SHARP Zaurus Collie (SL-5500) + * - SHARP Zaurus Poodle (SL-5600) + * + * Copyright (c) 2005 John Lenz + * Based on from xtkbd.c + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware/locomo.h> +#include <asm/irq.h> + +MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>"); +MODULE_DESCRIPTION("LoCoMo keyboard driver"); +MODULE_LICENSE("GPL"); + +#define LOCOMOKBD_NUMKEYS 128 + +#define KEY_ACTIVITY KEY_F16 +#define KEY_CONTACT KEY_F18 +#define KEY_CENTER KEY_F15 + +static const unsigned char +locomokbd_keycode[LOCOMOKBD_NUMKEYS] = { + 0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0, /* 0 - 9 */ + 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT, /* 10 - 19 */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 20 - 29 */ + 0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */ + KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */ + KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0, /* 60 - 69 */ + KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */ + 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */ + KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */ + 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */ + KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */ + KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */ +}; + +#define KB_ROWS 16 +#define KB_COLS 8 +#define KB_ROWMASK(r) (1 << (r)) +#define SCANCODE(c,r) ( ((c)<<4) + (r) + 1 ) + +#define KB_DELAY 8 +#define SCAN_INTERVAL (HZ/10) + +struct locomokbd { + unsigned char keycode[LOCOMOKBD_NUMKEYS]; + struct input_dev *input; + char phys[32]; + + unsigned long base; + spinlock_t lock; + + struct timer_list timer; + unsigned long suspend_jiffies; + unsigned int count_cancel; +}; + +/* helper functions for reading the keyboard matrix */ +static inline void locomokbd_charge_all(unsigned long membase) +{ + locomo_writel(0x00FF, membase + LOCOMO_KSC); +} + +static inline void locomokbd_activate_all(unsigned long membase) +{ + unsigned long r; + + locomo_writel(0, membase + LOCOMO_KSC); + r = locomo_readl(membase + LOCOMO_KIC); + r &= 0xFEFF; + locomo_writel(r, membase + LOCOMO_KIC); +} + +static inline void locomokbd_activate_col(unsigned long membase, int col) +{ + unsigned short nset; + unsigned short nbset; + + nset = 0xFF & ~(1 << col); + nbset = (nset << 8) + nset; + locomo_writel(nbset, membase + LOCOMO_KSC); +} + +static inline void locomokbd_reset_col(unsigned long membase, int col) +{ + unsigned short nbset; + + nbset = ((0xFF & ~(1 << col)) << 8) + 0xFF; + locomo_writel(nbset, membase + LOCOMO_KSC); +} + +/* + * The LoCoMo keyboard only generates interrupts when a key is pressed. + * So when a key is pressed, we enable a timer. This timer scans the + * keyboard, and this is how we detect when the key is released. + */ + +/* Scan the hardware keyboard and push any changes up through the input layer */ +static void locomokbd_scankeyboard(struct locomokbd *locomokbd) +{ + unsigned int row, col, rowd; + unsigned long flags; + unsigned int num_pressed; + unsigned long membase = locomokbd->base; + + spin_lock_irqsave(&locomokbd->lock, flags); + + locomokbd_charge_all(membase); + + num_pressed = 0; + for (col = 0; col < KB_COLS; col++) { + + locomokbd_activate_col(membase, col); + udelay(KB_DELAY); + + rowd = ~locomo_readl(membase + LOCOMO_KIB); + for (row = 0; row < KB_ROWS; row++) { + unsigned int scancode, pressed, key; + + scancode = SCANCODE(col, row); + pressed = rowd & KB_ROWMASK(row); + key = locomokbd->keycode[scancode]; + + input_report_key(locomokbd->input, key, pressed); + if (likely(!pressed)) + continue; + + num_pressed++; + + /* The "Cancel/ESC" key is labeled "On/Off" on + * Collie and Poodle and should suspend the device + * if it was pressed for more than a second. */ + if (unlikely(key == KEY_ESC)) { + if (!time_after(jiffies, + locomokbd->suspend_jiffies + HZ)) + continue; + if (locomokbd->count_cancel++ + != (HZ/SCAN_INTERVAL + 1)) + continue; + input_event(locomokbd->input, EV_PWR, + KEY_SUSPEND, 1); + locomokbd->suspend_jiffies = jiffies; + } else + locomokbd->count_cancel = 0; + } + locomokbd_reset_col(membase, col); + } + locomokbd_activate_all(membase); + + input_sync(locomokbd->input); + + /* if any keys are pressed, enable the timer */ + if (num_pressed) + mod_timer(&locomokbd->timer, jiffies + SCAN_INTERVAL); + else + locomokbd->count_cancel = 0; + + spin_unlock_irqrestore(&locomokbd->lock, flags); +} + +/* + * LoCoMo keyboard interrupt handler. + */ +static irqreturn_t locomokbd_interrupt(int irq, void *dev_id) +{ + struct locomokbd *locomokbd = dev_id; + u16 r; + + r = locomo_readl(locomokbd->base + LOCOMO_KIC); + if ((r & 0x0001) == 0) + return IRQ_HANDLED; + + locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */ + + /** wait chattering delay **/ + udelay(100); + + locomokbd_scankeyboard(locomokbd); + return IRQ_HANDLED; +} + +/* + * LoCoMo timer checking for released keys + */ +static void locomokbd_timer_callback(struct timer_list *t) +{ + struct locomokbd *locomokbd = from_timer(locomokbd, t, timer); + + locomokbd_scankeyboard(locomokbd); +} + +static int locomokbd_open(struct input_dev *dev) +{ + struct locomokbd *locomokbd = input_get_drvdata(dev); + u16 r; + + r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010; + locomo_writel(r, locomokbd->base + LOCOMO_KIC); + return 0; +} + +static void locomokbd_close(struct input_dev *dev) +{ + struct locomokbd *locomokbd = input_get_drvdata(dev); + u16 r; + + r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010; + locomo_writel(r, locomokbd->base + LOCOMO_KIC); +} + +static int locomokbd_probe(struct locomo_dev *dev) +{ + struct locomokbd *locomokbd; + struct input_dev *input_dev; + int i, err; + + locomokbd = kzalloc(sizeof(struct locomokbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!locomokbd || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + /* try and claim memory region */ + if (!request_mem_region((unsigned long) dev->mapbase, + dev->length, + LOCOMO_DRIVER_NAME(dev))) { + err = -EBUSY; + printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n"); + goto err_free_mem; + } + + locomo_set_drvdata(dev, locomokbd); + + locomokbd->base = (unsigned long) dev->mapbase; + + spin_lock_init(&locomokbd->lock); + + timer_setup(&locomokbd->timer, locomokbd_timer_callback, 0); + + locomokbd->suspend_jiffies = jiffies; + + locomokbd->input = input_dev; + strcpy(locomokbd->phys, "locomokbd/input0"); + + input_dev->name = "LoCoMo keyboard"; + input_dev->phys = locomokbd->phys; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->open = locomokbd_open; + input_dev->close = locomokbd_close; + input_dev->dev.parent = &dev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | + BIT_MASK(EV_PWR); + input_dev->keycode = locomokbd->keycode; + input_dev->keycodesize = sizeof(locomokbd_keycode[0]); + input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode); + + input_set_drvdata(input_dev, locomokbd); + + memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode)); + for (i = 0; i < LOCOMOKBD_NUMKEYS; i++) + set_bit(locomokbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + + /* attempt to get the interrupt */ + err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd); + if (err) { + printk(KERN_ERR "locomokbd: Can't get irq for keyboard\n"); + goto err_release_region; + } + + err = input_register_device(locomokbd->input); + if (err) + goto err_free_irq; + + return 0; + + err_free_irq: + free_irq(dev->irq[0], locomokbd); + err_release_region: + release_mem_region((unsigned long) dev->mapbase, dev->length); + locomo_set_drvdata(dev, NULL); + err_free_mem: + input_free_device(input_dev); + kfree(locomokbd); + + return err; +} + +static int locomokbd_remove(struct locomo_dev *dev) +{ + struct locomokbd *locomokbd = locomo_get_drvdata(dev); + + free_irq(dev->irq[0], locomokbd); + + del_timer_sync(&locomokbd->timer); + + input_unregister_device(locomokbd->input); + locomo_set_drvdata(dev, NULL); + + release_mem_region((unsigned long) dev->mapbase, dev->length); + + kfree(locomokbd); + + return 0; +} + +static struct locomo_driver keyboard_driver = { + .drv = { + .name = "locomokbd" + }, + .devid = LOCOMO_DEVID_KEYBOARD, + .probe = locomokbd_probe, + .remove = locomokbd_remove, +}; + +static int __init locomokbd_init(void) +{ + return locomo_driver_register(&keyboard_driver); +} + +static void __exit locomokbd_exit(void) +{ + locomo_driver_unregister(&keyboard_driver); +} + +module_init(locomokbd_init); +module_exit(locomokbd_exit); diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c new file mode 100644 index 000000000..1dd57ac0e --- /dev/null +++ b/drivers/input/keyboard/lpc32xx-keys.c @@ -0,0 +1,342 @@ +/* + * NXP LPC32xx SoC Key Scan Interface + * + * Authors: + * Kevin Wells <kevin.wells@nxp.com> + * Roland Stigge <stigge@antcom.de> + * + * Copyright (C) 2010 NXP Semiconductors + * Copyright (C) 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * This controller supports square key matrices from 1x1 up to 8x8 + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/input/matrix_keypad.h> + +#define DRV_NAME "lpc32xx_keys" + +/* + * Key scanner register offsets + */ +#define LPC32XX_KS_DEB(x) ((x) + 0x00) +#define LPC32XX_KS_STATE_COND(x) ((x) + 0x04) +#define LPC32XX_KS_IRQ(x) ((x) + 0x08) +#define LPC32XX_KS_SCAN_CTL(x) ((x) + 0x0C) +#define LPC32XX_KS_FAST_TST(x) ((x) + 0x10) +#define LPC32XX_KS_MATRIX_DIM(x) ((x) + 0x14) /* 1..8 */ +#define LPC32XX_KS_DATA(x, y) ((x) + 0x40 + ((y) << 2)) + +#define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n) ((n) & 0xFF) + +#define LPC32XX_KSCAN_SCOND_IN_IDLE 0x0 +#define LPC32XX_KSCAN_SCOND_IN_SCANONCE 0x1 +#define LPC32XX_KSCAN_SCOND_IN_IRQGEN 0x2 +#define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX 0x3 + +#define LPC32XX_KSCAN_IRQ_PENDING_CLR 0x1 + +#define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n) ((n) & 0xFF) + +#define LPC32XX_KSCAN_FTST_FORCESCANONCE 0x1 +#define LPC32XX_KSCAN_FTST_USE32K_CLK 0x2 + +#define LPC32XX_KSCAN_MSEL_SELECT(n) ((n) & 0xF) + +struct lpc32xx_kscan_drv { + struct input_dev *input; + struct clk *clk; + void __iomem *kscan_base; + unsigned int irq; + + u32 matrix_sz; /* Size of matrix in XxY, ie. 3 = 3x3 */ + u32 deb_clks; /* Debounce clocks (based on 32KHz clock) */ + u32 scan_delay; /* Scan delay (based on 32KHz clock) */ + + unsigned short *keymap; /* Pointer to key map for the scan matrix */ + unsigned int row_shift; + + u8 lastkeystates[8]; +}; + +static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int col) +{ + struct input_dev *input = kscandat->input; + unsigned row, changed, scancode, keycode; + u8 key; + + key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, col)); + changed = key ^ kscandat->lastkeystates[col]; + kscandat->lastkeystates[col] = key; + + for (row = 0; changed; row++, changed >>= 1) { + if (changed & 1) { + /* Key state changed, signal an event */ + scancode = MATRIX_SCAN_CODE(row, col, + kscandat->row_shift); + keycode = kscandat->keymap[scancode]; + input_event(input, EV_MSC, MSC_SCAN, scancode); + input_report_key(input, keycode, key & (1 << row)); + } + } +} + +static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id) +{ + struct lpc32xx_kscan_drv *kscandat = dev_id; + int i; + + for (i = 0; i < kscandat->matrix_sz; i++) + lpc32xx_mod_states(kscandat, i); + + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); + + input_sync(kscandat->input); + + return IRQ_HANDLED; +} + +static int lpc32xx_kscan_open(struct input_dev *dev) +{ + struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev); + int error; + + error = clk_prepare_enable(kscandat->clk); + if (error) + return error; + + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); + + return 0; +} + +static void lpc32xx_kscan_close(struct input_dev *dev) +{ + struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev); + + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); + clk_disable_unprepare(kscandat->clk); +} + +static int lpc32xx_parse_dt(struct device *dev, + struct lpc32xx_kscan_drv *kscandat) +{ + struct device_node *np = dev->of_node; + u32 rows = 0, columns = 0; + int err; + + err = matrix_keypad_parse_properties(dev, &rows, &columns); + if (err) + return err; + if (rows != columns) { + dev_err(dev, "rows and columns must be equal!\n"); + return -EINVAL; + } + + kscandat->matrix_sz = rows; + kscandat->row_shift = get_count_order(columns); + + of_property_read_u32(np, "nxp,debounce-delay-ms", &kscandat->deb_clks); + of_property_read_u32(np, "nxp,scan-delay-ms", &kscandat->scan_delay); + if (!kscandat->deb_clks || !kscandat->scan_delay) { + dev_err(dev, "debounce or scan delay not specified\n"); + return -EINVAL; + } + + return 0; +} + +static int lpc32xx_kscan_probe(struct platform_device *pdev) +{ + struct lpc32xx_kscan_drv *kscandat; + struct input_dev *input; + struct resource *res; + size_t keymap_size; + int error; + int irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get platform I/O memory\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get platform irq\n"); + return -EINVAL; + } + + kscandat = devm_kzalloc(&pdev->dev, sizeof(*kscandat), + GFP_KERNEL); + if (!kscandat) + return -ENOMEM; + + error = lpc32xx_parse_dt(&pdev->dev, kscandat); + if (error) { + dev_err(&pdev->dev, "failed to parse device tree\n"); + return error; + } + + keymap_size = sizeof(kscandat->keymap[0]) * + (kscandat->matrix_sz << kscandat->row_shift); + kscandat->keymap = devm_kzalloc(&pdev->dev, keymap_size, GFP_KERNEL); + if (!kscandat->keymap) + return -ENOMEM; + + kscandat->input = input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + /* Setup key input */ + input->name = pdev->name; + input->phys = "lpc32xx/input0"; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + input->open = lpc32xx_kscan_open; + input->close = lpc32xx_kscan_close; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + error = matrix_keypad_build_keymap(NULL, NULL, + kscandat->matrix_sz, + kscandat->matrix_sz, + kscandat->keymap, kscandat->input); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return error; + } + + input_set_drvdata(kscandat->input, kscandat); + + kscandat->kscan_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kscandat->kscan_base)) + return PTR_ERR(kscandat->kscan_base); + + /* Get the key scanner clock */ + kscandat->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(kscandat->clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(kscandat->clk); + } + + /* Configure the key scanner */ + error = clk_prepare_enable(kscandat->clk); + if (error) + return error; + + writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base)); + writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base)); + writel(LPC32XX_KSCAN_FTST_USE32K_CLK, + LPC32XX_KS_FAST_TST(kscandat->kscan_base)); + writel(kscandat->matrix_sz, + LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base)); + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); + clk_disable_unprepare(kscandat->clk); + + error = devm_request_irq(&pdev->dev, irq, lpc32xx_kscan_irq, 0, + pdev->name, kscandat); + if (error) { + dev_err(&pdev->dev, "failed to request irq\n"); + return error; + } + + error = input_register_device(kscandat->input); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + platform_set_drvdata(pdev, kscandat); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int lpc32xx_kscan_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev); + struct input_dev *input = kscandat->input; + + mutex_lock(&input->mutex); + + if (input->users) { + /* Clear IRQ and disable clock */ + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); + clk_disable_unprepare(kscandat->clk); + } + + mutex_unlock(&input->mutex); + return 0; +} + +static int lpc32xx_kscan_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev); + struct input_dev *input = kscandat->input; + int retval = 0; + + mutex_lock(&input->mutex); + + if (input->users) { + /* Enable clock and clear IRQ */ + retval = clk_prepare_enable(kscandat->clk); + if (retval == 0) + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base)); + } + + mutex_unlock(&input->mutex); + return retval; +} +#endif + +static SIMPLE_DEV_PM_OPS(lpc32xx_kscan_pm_ops, lpc32xx_kscan_suspend, + lpc32xx_kscan_resume); + +static const struct of_device_id lpc32xx_kscan_match[] = { + { .compatible = "nxp,lpc3220-key" }, + {}, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match); + +static struct platform_driver lpc32xx_kscan_driver = { + .probe = lpc32xx_kscan_probe, + .driver = { + .name = DRV_NAME, + .pm = &lpc32xx_kscan_pm_ops, + .of_match_table = lpc32xx_kscan_match, + } +}; + +module_platform_driver(lpc32xx_kscan_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices"); diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c new file mode 100644 index 000000000..78e3567ec --- /dev/null +++ b/drivers/input/keyboard/maple_keyb.c @@ -0,0 +1,259 @@ +/* + * SEGA Dreamcast keyboard driver + * Based on drivers/usb/usbkbd.c + * Copyright (c) YAEGASHI Takeshi, 2001 + * Porting to 2.6 Copyright (c) Adrian McMenamin, 2007 - 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/maple.h> + +/* Very simple mutex to ensure proper cleanup */ +static DEFINE_MUTEX(maple_keyb_mutex); + +#define NR_SCANCODES 256 + +MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk"); +MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver"); +MODULE_LICENSE("GPL"); + +struct dc_kbd { + struct input_dev *dev; + unsigned short keycode[NR_SCANCODES]; + unsigned char new[8]; + unsigned char old[8]; +}; + +static const unsigned short dc_kbd_keycode[NR_SCANCODES] = { + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, + KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, + KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, KEY_V, + KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, + KEY_7, KEY_8, KEY_9, KEY_0, KEY_ENTER, KEY_ESC, KEY_BACKSPACE, + KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, + KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH, + KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, + KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_SYSRQ, + KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, + KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, + KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, + KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, + KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, KEY_102ND, + KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15, + KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, + KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, KEY_STOP, + KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE, + KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN, + KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, + KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, + KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, + KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, + KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, + KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, + KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_SCREENLOCK, KEY_REFRESH, + KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED +}; + +static void dc_scan_kbd(struct dc_kbd *kbd) +{ + struct input_dev *dev = kbd->dev; + void *ptr; + int code, keycode; + int i; + + for (i = 0; i < 8; i++) { + code = i + 224; + keycode = kbd->keycode[code]; + input_event(dev, EV_MSC, MSC_SCAN, code); + input_report_key(dev, keycode, (kbd->new[0] >> i) & 1); + } + + for (i = 2; i < 8; i++) { + ptr = memchr(kbd->new + 2, kbd->old[i], 6); + code = kbd->old[i]; + if (code > 3 && ptr == NULL) { + keycode = kbd->keycode[code]; + if (keycode) { + input_event(dev, EV_MSC, MSC_SCAN, code); + input_report_key(dev, keycode, 0); + } else + dev_dbg(&dev->dev, + "Unknown key (scancode %#x) released.", + code); + } + ptr = memchr(kbd->old + 2, kbd->new[i], 6); + code = kbd->new[i]; + if (code > 3 && ptr) { + keycode = kbd->keycode[code]; + if (keycode) { + input_event(dev, EV_MSC, MSC_SCAN, code); + input_report_key(dev, keycode, 1); + } else + dev_dbg(&dev->dev, + "Unknown key (scancode %#x) pressed.", + code); + } + } + input_sync(dev); + memcpy(kbd->old, kbd->new, 8); +} + +static void dc_kbd_callback(struct mapleq *mq) +{ + struct maple_device *mapledev = mq->dev; + struct dc_kbd *kbd = maple_get_drvdata(mapledev); + unsigned long *buf = (unsigned long *)(mq->recvbuf->buf); + + /* + * We should always get the lock because the only + * time it may be locked is if the driver is in the cleanup phase. + */ + if (likely(mutex_trylock(&maple_keyb_mutex))) { + + if (buf[1] == mapledev->function) { + memcpy(kbd->new, buf + 2, 8); + dc_scan_kbd(kbd); + } + + mutex_unlock(&maple_keyb_mutex); + } +} + +static int probe_maple_kbd(struct device *dev) +{ + struct maple_device *mdev; + struct maple_driver *mdrv; + int i, error; + struct dc_kbd *kbd; + struct input_dev *idev; + + mdev = to_maple_dev(dev); + mdrv = to_maple_driver(dev->driver); + + kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); + if (!kbd) { + error = -ENOMEM; + goto fail; + } + + idev = input_allocate_device(); + if (!idev) { + error = -ENOMEM; + goto fail_idev_alloc; + } + + kbd->dev = idev; + memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode)); + + idev->name = mdev->product_name; + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + idev->keycode = kbd->keycode; + idev->keycodesize = sizeof(unsigned short); + idev->keycodemax = ARRAY_SIZE(kbd->keycode); + idev->id.bustype = BUS_HOST; + idev->dev.parent = &mdev->dev; + + for (i = 0; i < NR_SCANCODES; i++) + __set_bit(dc_kbd_keycode[i], idev->keybit); + __clear_bit(KEY_RESERVED, idev->keybit); + + input_set_capability(idev, EV_MSC, MSC_SCAN); + + error = input_register_device(idev); + if (error) + goto fail_register; + + /* Maple polling is locked to VBLANK - which may be just 50/s */ + maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, + MAPLE_FUNC_KEYBOARD); + + mdev->driver = mdrv; + + maple_set_drvdata(mdev, kbd); + + return error; + +fail_register: + maple_set_drvdata(mdev, NULL); + input_free_device(idev); +fail_idev_alloc: + kfree(kbd); +fail: + return error; +} + +static int remove_maple_kbd(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + struct dc_kbd *kbd = maple_get_drvdata(mdev); + + mutex_lock(&maple_keyb_mutex); + + input_unregister_device(kbd->dev); + kfree(kbd); + + maple_set_drvdata(mdev, NULL); + + mutex_unlock(&maple_keyb_mutex); + return 0; +} + +static struct maple_driver dc_kbd_driver = { + .function = MAPLE_FUNC_KEYBOARD, + .drv = { + .name = "Dreamcast_keyboard", + .probe = probe_maple_kbd, + .remove = remove_maple_kbd, + }, +}; + +static int __init dc_kbd_init(void) +{ + return maple_driver_register(&dc_kbd_driver); +} + +static void __exit dc_kbd_exit(void) +{ + maple_driver_unregister(&dc_kbd_driver); +} + +module_init(dc_kbd_init); +module_exit(dc_kbd_exit); diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 000000000..3d1cb7bf5 --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,589 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/input/matrix_keypad.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned int row_shift; + + DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS); + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + spinlock_t lock; + bool scan_pending; + bool stopped; + bool gpio_all_disabled; +}; + +/* + * NOTE: If drive_inactive_cols is false, then the GPIO has to be put into + * HiZ when de-activated to cause minmal side effect when scanning other + * columns. In that case it is configured here to be input, otherwise it is + * driven with the inactive value. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + if (!pdata->drive_inactive_cols) + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (pdata->clustered_irq > 0) + enable_irq(pdata->clustered_irq); + else { + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); + } +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (pdata->clustered_irq > 0) + disable_irq_nosync(pdata->clustered_irq); + else { + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); + } +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const unsigned short *keycodes = input_dev->keycode; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + spin_lock_irq(&keypad->lock); + keypad->stopped = true; + spin_unlock_irq(&keypad->lock); + + flush_delayed_work(&keypad->work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM_SLEEP +static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + unsigned int gpio; + int i; + + if (pdata->clustered_irq > 0) { + if (enable_irq_wake(pdata->clustered_irq) == 0) + keypad->gpio_all_disabled = true; + } else { + + for (i = 0; i < pdata->num_row_gpios; i++) { + if (!test_bit(i, keypad->disabled_gpios)) { + gpio = pdata->row_gpios[i]; + + if (enable_irq_wake(gpio_to_irq(gpio)) == 0) + __set_bit(i, keypad->disabled_gpios); + } + } + } +} + +static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + unsigned int gpio; + int i; + + if (pdata->clustered_irq > 0) { + if (keypad->gpio_all_disabled) { + disable_irq_wake(pdata->clustered_irq); + keypad->gpio_all_disabled = false; + } + } else { + for (i = 0; i < pdata->num_row_gpios; i++) { + if (test_and_clear_bit(i, keypad->disabled_gpios)) { + gpio = pdata->row_gpios[i]; + disable_irq_wake(gpio_to_irq(gpio)); + } + } + } +} + +static int matrix_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + matrix_keypad_enable_wakeup(keypad); + + return 0; +} + +static int matrix_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) + matrix_keypad_disable_wakeup(keypad); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, + matrix_keypad_suspend, matrix_keypad_resume); + +static int matrix_keypad_init_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + if (pdata->clustered_irq > 0) { + err = request_any_context_irq(pdata->clustered_irq, + matrix_keypad_interrupt, + pdata->clustered_irq_flags, + "matrix-keypad", keypad); + if (err < 0) { + dev_err(&pdev->dev, + "Unable to acquire clustered interrupt\n"); + goto err_free_rows; + } + } else { + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_any_context_irq( + gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err < 0) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static void matrix_keypad_free_gpio(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (pdata->clustered_irq > 0) { + free_irq(pdata->clustered_irq, keypad); + } else { + for (i = 0; i < pdata->num_row_gpios; i++) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + } + + for (i = 0; i < pdata->num_row_gpios; i++) + gpio_free(pdata->row_gpios[i]); + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); +} + +#ifdef CONFIG_OF +static struct matrix_keypad_platform_data * +matrix_keypad_parse_dt(struct device *dev) +{ + struct matrix_keypad_platform_data *pdata; + struct device_node *np = dev->of_node; + unsigned int *gpios; + int ret, i, nrow, ncol; + + if (!np) { + dev_err(dev, "device lacks DT data\n"); + return ERR_PTR(-ENODEV); + } + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for platform data\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->num_row_gpios = nrow = of_gpio_named_count(np, "row-gpios"); + pdata->num_col_gpios = ncol = of_gpio_named_count(np, "col-gpios"); + if (nrow <= 0 || ncol <= 0) { + dev_err(dev, "number of keypad rows/columns not specified\n"); + return ERR_PTR(-EINVAL); + } + + if (of_get_property(np, "linux,no-autorepeat", NULL)) + pdata->no_autorepeat = true; + + pdata->wakeup = of_property_read_bool(np, "wakeup-source") || + of_property_read_bool(np, "linux,wakeup"); /* legacy */ + + if (of_get_property(np, "gpio-activelow", NULL)) + pdata->active_low = true; + + pdata->drive_inactive_cols = + of_property_read_bool(np, "drive-inactive-cols"); + + of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms); + of_property_read_u32(np, "col-scan-delay-us", + &pdata->col_scan_delay_us); + + gpios = devm_kcalloc(dev, + pdata->num_row_gpios + pdata->num_col_gpios, + sizeof(unsigned int), + GFP_KERNEL); + if (!gpios) { + dev_err(dev, "could not allocate memory for gpios\n"); + return ERR_PTR(-ENOMEM); + } + + for (i = 0; i < nrow; i++) { + ret = of_get_named_gpio(np, "row-gpios", i); + if (ret < 0) + return ERR_PTR(ret); + gpios[i] = ret; + } + + for (i = 0; i < ncol; i++) { + ret = of_get_named_gpio(np, "col-gpios", i); + if (ret < 0) + return ERR_PTR(ret); + gpios[nrow + i] = ret; + } + + pdata->row_gpios = gpios; + pdata->col_gpios = &gpios[pdata->num_row_gpios]; + + return pdata; +} +#else +static inline struct matrix_keypad_platform_data * +matrix_keypad_parse_dt(struct device *dev) +{ + dev_err(dev, "no platform data defined\n"); + + return ERR_PTR(-EINVAL); +} +#endif + +static int matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + int err; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + pdata = matrix_keypad_parse_dt(&pdev->dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } else if (!pdata->keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->row_shift = get_count_order(pdata->num_col_gpios); + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + err = matrix_keypad_build_keymap(pdata->keymap_data, NULL, + pdata->num_row_gpios, + pdata->num_col_gpios, + NULL, input_dev); + if (err) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err_free_mem; + } + + if (!pdata->no_autorepeat) + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = matrix_keypad_init_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_gpio; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_gpio: + matrix_keypad_free_gpio(keypad); +err_free_mem: + input_free_device(input_dev); + kfree(keypad); + return err; +} + +static int matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + + matrix_keypad_free_gpio(keypad); + input_unregister_device(keypad->input_dev); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id matrix_keypad_dt_match[] = { + { .compatible = "gpio-matrix-keypad" }, + { } +}; +MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match); +#endif + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = matrix_keypad_remove, + .driver = { + .name = "matrix-keypad", + .pm = &matrix_keypad_pm_ops, + .of_match_table = of_match_ptr(matrix_keypad_dt_match), + }, +}; +module_platform_driver(matrix_keypad_driver); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c new file mode 100644 index 000000000..cd44d22d8 --- /dev/null +++ b/drivers/input/keyboard/max7359_keypad.c @@ -0,0 +1,297 @@ +/* + * max7359_keypad.c - MAX7359 Key Switch Controller Driver + * + * Copyright (C) 2009 Samsung Electronics + * Kim Kyuwon <q1.kim@samsung.com> + * + * Based on pxa27x_keypad.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456 + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> + +#define MAX7359_MAX_KEY_ROWS 8 +#define MAX7359_MAX_KEY_COLS 8 +#define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS) +#define MAX7359_ROW_SHIFT 3 + +/* + * MAX7359 registers + */ +#define MAX7359_REG_KEYFIFO 0x00 +#define MAX7359_REG_CONFIG 0x01 +#define MAX7359_REG_DEBOUNCE 0x02 +#define MAX7359_REG_INTERRUPT 0x03 +#define MAX7359_REG_PORTS 0x04 +#define MAX7359_REG_KEYREP 0x05 +#define MAX7359_REG_SLEEP 0x06 + +/* + * Configuration register bits + */ +#define MAX7359_CFG_SLEEP (1 << 7) +#define MAX7359_CFG_INTERRUPT (1 << 5) +#define MAX7359_CFG_KEY_RELEASE (1 << 3) +#define MAX7359_CFG_WAKEUP (1 << 1) +#define MAX7359_CFG_TIMEOUT (1 << 0) + +/* + * Autosleep register values (ms) + */ +#define MAX7359_AUTOSLEEP_8192 0x01 +#define MAX7359_AUTOSLEEP_4096 0x02 +#define MAX7359_AUTOSLEEP_2048 0x03 +#define MAX7359_AUTOSLEEP_1024 0x04 +#define MAX7359_AUTOSLEEP_512 0x05 +#define MAX7359_AUTOSLEEP_256 0x06 + +struct max7359_keypad { + /* matrix key code map */ + unsigned short keycodes[MAX7359_MAX_KEY_NUM]; + + struct input_dev *input_dev; + struct i2c_client *client; +}; + +static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + return ret; +} + +static int max7359_read_reg(struct i2c_client *client, int reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, err %d\n", + __func__, reg, ret); + return ret; +} + +/* runs in an IRQ thread -- can (and will!) sleep */ +static irqreturn_t max7359_interrupt(int irq, void *dev_id) +{ + struct max7359_keypad *keypad = dev_id; + struct input_dev *input_dev = keypad->input_dev; + int val, row, col, release, code; + + val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO); + row = val & 0x7; + col = (val >> 3) & 0x7; + release = val & 0x40; + + code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); + + dev_dbg(&keypad->client->dev, + "key[%d:%d] %s\n", row, col, release ? "release" : "press"); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], !release); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +/* + * Let MAX7359 fall into a deep sleep: + * If no keys are pressed, enter sleep mode for 8192 ms. And if any + * key is pressed, the MAX7359 returns to normal operating mode. + */ +static inline void max7359_fall_deepsleep(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192); +} + +/* + * Let MAX7359 take a catnap: + * Autosleep just for 256 ms. + */ +static inline void max7359_take_catnap(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256); +} + +static int max7359_open(struct input_dev *dev) +{ + struct max7359_keypad *keypad = input_get_drvdata(dev); + + max7359_take_catnap(keypad->client); + + return 0; +} + +static void max7359_close(struct input_dev *dev) +{ + struct max7359_keypad *keypad = input_get_drvdata(dev); + + max7359_fall_deepsleep(keypad->client); +} + +static void max7359_initialize(struct i2c_client *client) +{ + max7359_write_reg(client, MAX7359_REG_CONFIG, + MAX7359_CFG_KEY_RELEASE | /* Key release enable */ + MAX7359_CFG_WAKEUP); /* Key press wakeup enable */ + + /* Full key-scan functionality */ + max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F); + + /* nINT asserts every debounce cycles */ + max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01); + + max7359_fall_deepsleep(client); +} + +static int max7359_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct matrix_keymap_data *keymap_data = + dev_get_platdata(&client->dev); + struct max7359_keypad *keypad; + struct input_dev *input_dev; + int ret; + int error; + + if (!client->irq) { + dev_err(&client->dev, "The irq number should not be zero\n"); + return -EINVAL; + } + + /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */ + ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + return -ENODEV; + } + + dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); + + keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad), + GFP_KERNEL); + if (!keypad) { + dev_err(&client->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + input_dev = devm_input_allocate_device(&client->dev); + if (!input_dev) { + dev_err(&client->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + keypad->client = client; + keypad->input_dev = input_dev; + + input_dev->name = client->name; + input_dev->id.bustype = BUS_I2C; + input_dev->open = max7359_open; + input_dev->close = max7359_close; + input_dev->dev.parent = &client->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + input_dev->keycode = keypad->keycodes; + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + error = matrix_keypad_build_keymap(keymap_data, NULL, + MAX7359_MAX_KEY_ROWS, + MAX7359_MAX_KEY_COLS, + keypad->keycodes, + input_dev); + if (error) { + dev_err(&client->dev, "failed to build keymap\n"); + return error; + } + + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + max7359_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, keypad); + if (error) { + dev_err(&client->dev, "failed to register interrupt\n"); + return error; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&client->dev, "failed to register input device\n"); + return error; + } + + /* Initialize MAX7359 */ + max7359_initialize(client); + + device_init_wakeup(&client->dev, 1); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max7359_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + max7359_fall_deepsleep(client); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int max7359_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + /* Restore the default setting */ + max7359_take_catnap(client); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(max7359_pm, max7359_suspend, max7359_resume); + +static const struct i2c_device_id max7359_ids[] = { + { "max7359", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max7359_ids); + +static struct i2c_driver max7359_i2c_driver = { + .driver = { + .name = "max7359", + .pm = &max7359_pm, + }, + .probe = max7359_probe, + .id_table = max7359_ids, +}; + +module_i2c_driver(max7359_i2c_driver); + +MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); +MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c new file mode 100644 index 000000000..be56d4f26 --- /dev/null +++ b/drivers/input/keyboard/mcs_touchkey.c @@ -0,0 +1,282 @@ +/* + * Touchkey driver for MELFAS MCS5000/5080 controller + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: HeungJun Kim <riverful.kim@samsung.com> + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/platform_data/mcs.h> +#include <linux/pm.h> + +/* MCS5000 Touchkey */ +#define MCS5000_TOUCHKEY_STATUS 0x04 +#define MCS5000_TOUCHKEY_STATUS_PRESS 7 +#define MCS5000_TOUCHKEY_FW 0x0a +#define MCS5000_TOUCHKEY_BASE_VAL 0x61 + +/* MCS5080 Touchkey */ +#define MCS5080_TOUCHKEY_STATUS 0x00 +#define MCS5080_TOUCHKEY_STATUS_PRESS 3 +#define MCS5080_TOUCHKEY_FW 0x01 +#define MCS5080_TOUCHKEY_BASE_VAL 0x1 + +enum mcs_touchkey_type { + MCS5000_TOUCHKEY, + MCS5080_TOUCHKEY, +}; + +struct mcs_touchkey_chip { + unsigned int status_reg; + unsigned int pressbit; + unsigned int press_invert; + unsigned int baseval; +}; + +struct mcs_touchkey_data { + void (*poweron)(bool); + + struct i2c_client *client; + struct input_dev *input_dev; + struct mcs_touchkey_chip chip; + unsigned int key_code; + unsigned int key_val; + unsigned short keycodes[]; +}; + +static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) +{ + struct mcs_touchkey_data *data = dev_id; + struct mcs_touchkey_chip *chip = &data->chip; + struct i2c_client *client = data->client; + struct input_dev *input = data->input_dev; + unsigned int key_val; + unsigned int pressed; + int val; + + val = i2c_smbus_read_byte_data(client, chip->status_reg); + if (val < 0) { + dev_err(&client->dev, "i2c read error [%d]\n", val); + goto out; + } + + pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; + if (chip->press_invert) + pressed ^= chip->press_invert; + + /* key_val is 0 when released, so we should use key_val of press. */ + if (pressed) { + key_val = val & (0xff >> (8 - chip->pressbit)); + if (!key_val) + goto out; + key_val -= chip->baseval; + data->key_code = data->keycodes[key_val]; + data->key_val = key_val; + } + + input_event(input, EV_MSC, MSC_SCAN, data->key_val); + input_report_key(input, data->key_code, pressed); + input_sync(input); + + dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, + pressed ? "pressed" : "released"); + + out: + return IRQ_HANDLED; +} + +static int mcs_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct mcs_platform_data *pdata; + struct mcs_touchkey_data *data; + struct input_dev *input_dev; + unsigned int fw_reg; + int fw_ver; + int error; + int i; + + pdata = dev_get_platdata(&client->dev); + if (!pdata) { + dev_err(&client->dev, "no platform data defined\n"); + return -EINVAL; + } + + data = kzalloc(sizeof(struct mcs_touchkey_data) + + sizeof(data->keycodes[0]) * (pdata->key_maxval + 1), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input_dev = input_dev; + + if (id->driver_data == MCS5000_TOUCHKEY) { + data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; + data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; + data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; + fw_reg = MCS5000_TOUCHKEY_FW; + } else { + data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; + data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; + data->chip.press_invert = 1; + data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; + fw_reg = MCS5080_TOUCHKEY_FW; + } + + fw_ver = i2c_smbus_read_byte_data(client, fw_reg); + if (fw_ver < 0) { + error = fw_ver; + dev_err(&client->dev, "i2c read error[%d]\n", error); + goto err_free_mem; + } + dev_info(&client->dev, "Firmware version: %d\n", fw_ver); + + input_dev->name = "MELFAS MCS Touchkey"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (!pdata->no_autorepeat) + input_dev->evbit[0] |= BIT_MASK(EV_REP); + input_dev->keycode = data->keycodes; + input_dev->keycodesize = sizeof(data->keycodes[0]); + input_dev->keycodemax = pdata->key_maxval + 1; + + for (i = 0; i < pdata->keymap_size; i++) { + unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); + unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); + + data->keycodes[val] = code; + __set_bit(code, input_dev->keybit); + } + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, data); + + if (pdata->cfg_pin) + pdata->cfg_pin(); + + if (pdata->poweron) { + data->poweron = pdata->poweron; + data->poweron(true); + } + + error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->dev.driver->name, data); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + error = input_register_device(input_dev); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, data); + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return error; +} + +static int mcs_touchkey_remove(struct i2c_client *client) +{ + struct mcs_touchkey_data *data = i2c_get_clientdata(client); + + free_irq(client->irq, data); + if (data->poweron) + data->poweron(false); + input_unregister_device(data->input_dev); + kfree(data); + + return 0; +} + +static void mcs_touchkey_shutdown(struct i2c_client *client) +{ + struct mcs_touchkey_data *data = i2c_get_clientdata(client); + + if (data->poweron) + data->poweron(false); +} + +#ifdef CONFIG_PM_SLEEP +static int mcs_touchkey_suspend(struct device *dev) +{ + struct mcs_touchkey_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + + /* Disable the work */ + disable_irq(client->irq); + + /* Finally turn off the power */ + if (data->poweron) + data->poweron(false); + + return 0; +} + +static int mcs_touchkey_resume(struct device *dev) +{ + struct mcs_touchkey_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + + /* Enable the device first */ + if (data->poweron) + data->poweron(true); + + /* Enable irq again */ + enable_irq(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, + mcs_touchkey_suspend, mcs_touchkey_resume); + +static const struct i2c_device_id mcs_touchkey_id[] = { + { "mcs5000_touchkey", MCS5000_TOUCHKEY }, + { "mcs5080_touchkey", MCS5080_TOUCHKEY }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); + +static struct i2c_driver mcs_touchkey_driver = { + .driver = { + .name = "mcs_touchkey", + .pm = &mcs_touchkey_pm_ops, + }, + .probe = mcs_touchkey_probe, + .remove = mcs_touchkey_remove, + .shutdown = mcs_touchkey_shutdown, + .id_table = mcs_touchkey_id, +}; + +module_i2c_driver(mcs_touchkey_driver); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); +MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c new file mode 100644 index 000000000..884a74d8a --- /dev/null +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -0,0 +1,372 @@ +/* + * Touchkey driver for Freescale MPR121 Controllor + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Zhang Jiejing <jiejing.zhang@freescale.com> + * + * Based on mcs_touchkey.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +/* Register definitions */ +#define ELE_TOUCH_STATUS_0_ADDR 0x0 +#define ELE_TOUCH_STATUS_1_ADDR 0X1 +#define MHD_RISING_ADDR 0x2b +#define NHD_RISING_ADDR 0x2c +#define NCL_RISING_ADDR 0x2d +#define FDL_RISING_ADDR 0x2e +#define MHD_FALLING_ADDR 0x2f +#define NHD_FALLING_ADDR 0x30 +#define NCL_FALLING_ADDR 0x31 +#define FDL_FALLING_ADDR 0x32 +#define ELE0_TOUCH_THRESHOLD_ADDR 0x41 +#define ELE0_RELEASE_THRESHOLD_ADDR 0x42 +#define AFE_CONF_ADDR 0x5c +#define FILTER_CONF_ADDR 0x5d + +/* + * ELECTRODE_CONF_ADDR: This register configures the number of + * enabled capacitance sensing inputs and its run/suspend mode. + */ +#define ELECTRODE_CONF_ADDR 0x5e +#define ELECTRODE_CONF_QUICK_CHARGE 0x80 +#define AUTO_CONFIG_CTRL_ADDR 0x7b +#define AUTO_CONFIG_USL_ADDR 0x7d +#define AUTO_CONFIG_LSL_ADDR 0x7e +#define AUTO_CONFIG_TL_ADDR 0x7f + +/* Threshold of touch/release trigger */ +#define TOUCH_THRESHOLD 0x08 +#define RELEASE_THRESHOLD 0x05 +/* Masks for touch and release triggers */ +#define TOUCH_STATUS_MASK 0xfff +/* MPR121 has 12 keys */ +#define MPR121_MAX_KEY_COUNT 12 + +struct mpr121_touchkey { + struct i2c_client *client; + struct input_dev *input_dev; + unsigned int statusbits; + unsigned int keycount; + u32 keycodes[MPR121_MAX_KEY_COUNT]; +}; + +struct mpr121_init_register { + int addr; + u8 val; +}; + +static const struct mpr121_init_register init_reg_table[] = { + { MHD_RISING_ADDR, 0x1 }, + { NHD_RISING_ADDR, 0x1 }, + { MHD_FALLING_ADDR, 0x1 }, + { NHD_FALLING_ADDR, 0x1 }, + { NCL_FALLING_ADDR, 0xff }, + { FDL_FALLING_ADDR, 0x02 }, + { FILTER_CONF_ADDR, 0x04 }, + { AFE_CONF_ADDR, 0x0b }, + { AUTO_CONFIG_CTRL_ADDR, 0x0b }, +}; + +static void mpr121_vdd_supply_disable(void *data) +{ + struct regulator *vdd_supply = data; + + regulator_disable(vdd_supply); +} + +static struct regulator *mpr121_vdd_supply_init(struct device *dev) +{ + struct regulator *vdd_supply; + int err; + + vdd_supply = devm_regulator_get(dev, "vdd"); + if (IS_ERR(vdd_supply)) { + dev_err(dev, "failed to get vdd regulator: %ld\n", + PTR_ERR(vdd_supply)); + return vdd_supply; + } + + err = regulator_enable(vdd_supply); + if (err) { + dev_err(dev, "failed to enable vdd regulator: %d\n", err); + return ERR_PTR(err); + } + + err = devm_add_action(dev, mpr121_vdd_supply_disable, vdd_supply); + if (err) { + regulator_disable(vdd_supply); + dev_err(dev, "failed to add disable regulator action: %d\n", + err); + return ERR_PTR(err); + } + + return vdd_supply; +} + +static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) +{ + struct mpr121_touchkey *mpr121 = dev_id; + struct i2c_client *client = mpr121->client; + struct input_dev *input = mpr121->input_dev; + unsigned long bit_changed; + unsigned int key_num; + int reg; + + reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); + if (reg < 0) { + dev_err(&client->dev, "i2c read error [%d]\n", reg); + goto out; + } + + reg <<= 8; + reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR); + if (reg < 0) { + dev_err(&client->dev, "i2c read error [%d]\n", reg); + goto out; + } + + reg &= TOUCH_STATUS_MASK; + /* use old press bit to figure out which bit changed */ + bit_changed = reg ^ mpr121->statusbits; + mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; + + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; + + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); + + } + input_sync(input); + +out: + return IRQ_HANDLED; +} + +static int mpr121_phys_init(struct mpr121_touchkey *mpr121, + struct i2c_client *client, int vdd_uv) +{ + const struct mpr121_init_register *reg; + unsigned char usl, lsl, tl, eleconf; + int i, t, vdd, ret; + + /* Set up touch/release threshold for ele0-ele11 */ + for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) { + t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2); + ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD); + if (ret < 0) + goto err_i2c_write; + ret = i2c_smbus_write_byte_data(client, t + 1, + RELEASE_THRESHOLD); + if (ret < 0) + goto err_i2c_write; + } + + /* Set up init register */ + for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) { + reg = &init_reg_table[i]; + ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val); + if (ret < 0) + goto err_i2c_write; + } + + + /* + * Capacitance on sensing input varies and needs to be compensated. + * The internal MPR121-auto-configuration can do this if it's + * registers are set properly (based on vdd_uv). + */ + vdd = vdd_uv / 1000; + usl = ((vdd - 700) * 256) / vdd; + lsl = (usl * 65) / 100; + tl = (usl * 90) / 100; + ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl); + ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl); + ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl); + + /* + * Quick charge bit will let the capacitive charge to ready + * state quickly, or the buttons may not function after system + * boot. + */ + eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE; + ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, + eleconf); + if (ret != 0) + goto err_i2c_write; + + dev_dbg(&client->dev, "set up with %x keys.\n", mpr121->keycount); + + return 0; + +err_i2c_write: + dev_err(&client->dev, "i2c write error: %d\n", ret); + return ret; +} + +static int mpr_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct regulator *vdd_supply; + int vdd_uv; + struct mpr121_touchkey *mpr121; + struct input_dev *input_dev; + int error; + int i; + + if (!client->irq) { + dev_err(dev, "irq number should not be zero\n"); + return -EINVAL; + } + + vdd_supply = mpr121_vdd_supply_init(dev); + if (IS_ERR(vdd_supply)) + return PTR_ERR(vdd_supply); + + vdd_uv = regulator_get_voltage(vdd_supply); + + mpr121 = devm_kzalloc(dev, sizeof(*mpr121), GFP_KERNEL); + if (!mpr121) + return -ENOMEM; + + input_dev = devm_input_allocate_device(dev); + if (!input_dev) + return -ENOMEM; + + mpr121->client = client; + mpr121->input_dev = input_dev; + mpr121->keycount = device_property_read_u32_array(dev, "linux,keycodes", + NULL, 0); + if (mpr121->keycount > MPR121_MAX_KEY_COUNT) { + dev_err(dev, "too many keys defined (%d)\n", mpr121->keycount); + return -EINVAL; + } + + error = device_property_read_u32_array(dev, "linux,keycodes", + mpr121->keycodes, + mpr121->keycount); + if (error) { + dev_err(dev, + "failed to read linux,keycode property: %d\n", error); + return error; + } + + input_dev->name = "Freescale MPR121 Touchkey"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = dev; + if (device_property_read_bool(dev, "autorepeat")) + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_dev->keycode = mpr121->keycodes; + input_dev->keycodesize = sizeof(mpr121->keycodes[0]); + input_dev->keycodemax = mpr121->keycount; + + for (i = 0; i < mpr121->keycount; i++) + input_set_capability(input_dev, EV_KEY, mpr121->keycodes[i]); + + error = mpr121_phys_init(mpr121, client, vdd_uv); + if (error) { + dev_err(dev, "Failed to init register\n"); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, NULL, + mpr_touchkey_interrupt, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev->driver->name, mpr121); + if (error) { + dev_err(dev, "Failed to register interrupt\n"); + return error; + } + + error = input_register_device(input_dev); + if (error) + return error; + + i2c_set_clientdata(client, mpr121); + device_init_wakeup(dev, + device_property_read_bool(dev, "wakeup-source")); + + return 0; +} + +static int __maybe_unused mpr_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00); + + return 0; +} + +static int __maybe_unused mpr_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, + mpr121->keycount); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume); + +static const struct i2c_device_id mpr121_id[] = { + { "mpr121_touchkey", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpr121_id); + +#ifdef CONFIG_OF +static const struct of_device_id mpr121_touchkey_dt_match_table[] = { + { .compatible = "fsl,mpr121-touchkey" }, + { }, +}; +MODULE_DEVICE_TABLE(of, mpr121_touchkey_dt_match_table); +#endif + +static struct i2c_driver mpr_touchkey_driver = { + .driver = { + .name = "mpr121", + .pm = &mpr121_touchkey_pm_ops, + .of_match_table = of_match_ptr(mpr121_touchkey_dt_match_table), + }, + .id_table = mpr121_id, + .probe = mpr_touchkey_probe, +}; + +module_i2c_driver(mpr_touchkey_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>"); +MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip"); diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c new file mode 100644 index 000000000..02c67a174 --- /dev/null +++ b/drivers/input/keyboard/mtk-pmic-keys.c @@ -0,0 +1,339 @@ +/* + * Copyright (C) 2017 MediaTek, Inc. + * + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/mfd/mt6397/registers.h> +#include <linux/mfd/mt6397/core.h> + +#define MTK_PMIC_PWRKEY_RST_EN_MASK 0x1 +#define MTK_PMIC_PWRKEY_RST_EN_SHIFT 6 +#define MTK_PMIC_HOMEKEY_RST_EN_MASK 0x1 +#define MTK_PMIC_HOMEKEY_RST_EN_SHIFT 5 +#define MTK_PMIC_RST_DU_MASK 0x3 +#define MTK_PMIC_RST_DU_SHIFT 8 + +#define MTK_PMIC_PWRKEY_RST \ + (MTK_PMIC_PWRKEY_RST_EN_MASK << MTK_PMIC_PWRKEY_RST_EN_SHIFT) +#define MTK_PMIC_HOMEKEY_RST \ + (MTK_PMIC_HOMEKEY_RST_EN_MASK << MTK_PMIC_HOMEKEY_RST_EN_SHIFT) + +#define MTK_PMIC_PWRKEY_INDEX 0 +#define MTK_PMIC_HOMEKEY_INDEX 1 +#define MTK_PMIC_MAX_KEY_COUNT 2 + +struct mtk_pmic_keys_regs { + u32 deb_reg; + u32 deb_mask; + u32 intsel_reg; + u32 intsel_mask; +}; + +#define MTK_PMIC_KEYS_REGS(_deb_reg, _deb_mask, \ + _intsel_reg, _intsel_mask) \ +{ \ + .deb_reg = _deb_reg, \ + .deb_mask = _deb_mask, \ + .intsel_reg = _intsel_reg, \ + .intsel_mask = _intsel_mask, \ +} + +struct mtk_pmic_regs { + const struct mtk_pmic_keys_regs keys_regs[MTK_PMIC_MAX_KEY_COUNT]; + u32 pmic_rst_reg; +}; + +static const struct mtk_pmic_regs mt6397_regs = { + .keys_regs[MTK_PMIC_PWRKEY_INDEX] = + MTK_PMIC_KEYS_REGS(MT6397_CHRSTATUS, + 0x8, MT6397_INT_RSV, 0x10), + .keys_regs[MTK_PMIC_HOMEKEY_INDEX] = + MTK_PMIC_KEYS_REGS(MT6397_OCSTATUS2, + 0x10, MT6397_INT_RSV, 0x8), + .pmic_rst_reg = MT6397_TOP_RST_MISC, +}; + +static const struct mtk_pmic_regs mt6323_regs = { + .keys_regs[MTK_PMIC_PWRKEY_INDEX] = + MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS, + 0x2, MT6323_INT_MISC_CON, 0x10), + .keys_regs[MTK_PMIC_HOMEKEY_INDEX] = + MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS, + 0x4, MT6323_INT_MISC_CON, 0x8), + .pmic_rst_reg = MT6323_TOP_RST_MISC, +}; + +struct mtk_pmic_keys_info { + struct mtk_pmic_keys *keys; + const struct mtk_pmic_keys_regs *regs; + unsigned int keycode; + int irq; + bool wakeup:1; +}; + +struct mtk_pmic_keys { + struct input_dev *input_dev; + struct device *dev; + struct regmap *regmap; + struct mtk_pmic_keys_info keys[MTK_PMIC_MAX_KEY_COUNT]; +}; + +enum mtk_pmic_keys_lp_mode { + LP_DISABLE, + LP_ONEKEY, + LP_TWOKEY, +}; + +static void mtk_pmic_keys_lp_reset_setup(struct mtk_pmic_keys *keys, + u32 pmic_rst_reg) +{ + int ret; + u32 long_press_mode, long_press_debounce; + + ret = of_property_read_u32(keys->dev->of_node, + "power-off-time-sec", &long_press_debounce); + if (ret) + long_press_debounce = 0; + + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_RST_DU_MASK << MTK_PMIC_RST_DU_SHIFT, + long_press_debounce << MTK_PMIC_RST_DU_SHIFT); + + ret = of_property_read_u32(keys->dev->of_node, + "mediatek,long-press-mode", &long_press_mode); + if (ret) + long_press_mode = LP_DISABLE; + + switch (long_press_mode) { + case LP_ONEKEY: + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_PWRKEY_RST, + MTK_PMIC_PWRKEY_RST); + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_HOMEKEY_RST, + 0); + break; + case LP_TWOKEY: + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_PWRKEY_RST, + MTK_PMIC_PWRKEY_RST); + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_HOMEKEY_RST, + MTK_PMIC_HOMEKEY_RST); + break; + case LP_DISABLE: + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_PWRKEY_RST, + 0); + regmap_update_bits(keys->regmap, pmic_rst_reg, + MTK_PMIC_HOMEKEY_RST, + 0); + break; + default: + break; + } +} + +static irqreturn_t mtk_pmic_keys_irq_handler_thread(int irq, void *data) +{ + struct mtk_pmic_keys_info *info = data; + u32 key_deb, pressed; + + regmap_read(info->keys->regmap, info->regs->deb_reg, &key_deb); + + key_deb &= info->regs->deb_mask; + + pressed = !key_deb; + + input_report_key(info->keys->input_dev, info->keycode, pressed); + input_sync(info->keys->input_dev); + + dev_dbg(info->keys->dev, "(%s) key =%d using PMIC\n", + pressed ? "pressed" : "released", info->keycode); + + return IRQ_HANDLED; +} + +static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys, + struct mtk_pmic_keys_info *info) +{ + int ret; + + info->keys = keys; + + ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg, + info->regs->intsel_mask, + info->regs->intsel_mask); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(keys->dev, info->irq, NULL, + mtk_pmic_keys_irq_handler_thread, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + "mtk-pmic-keys", info); + if (ret) { + dev_err(keys->dev, "Failed to request IRQ: %d: %d\n", + info->irq, ret); + return ret; + } + + input_set_capability(keys->input_dev, EV_KEY, info->keycode); + + return 0; +} + +static int __maybe_unused mtk_pmic_keys_suspend(struct device *dev) +{ + struct mtk_pmic_keys *keys = dev_get_drvdata(dev); + int index; + + for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) { + if (keys->keys[index].wakeup) + enable_irq_wake(keys->keys[index].irq); + } + + return 0; +} + +static int __maybe_unused mtk_pmic_keys_resume(struct device *dev) +{ + struct mtk_pmic_keys *keys = dev_get_drvdata(dev); + int index; + + for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) { + if (keys->keys[index].wakeup) + disable_irq_wake(keys->keys[index].irq); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mtk_pmic_keys_pm_ops, mtk_pmic_keys_suspend, + mtk_pmic_keys_resume); + +static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = { + { + .compatible = "mediatek,mt6397-keys", + .data = &mt6397_regs, + }, { + .compatible = "mediatek,mt6323-keys", + .data = &mt6323_regs, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl); + +static int mtk_pmic_keys_probe(struct platform_device *pdev) +{ + int error, index = 0; + unsigned int keycount; + struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent); + struct device_node *node = pdev->dev.of_node, *child; + struct mtk_pmic_keys *keys; + const struct mtk_pmic_regs *mtk_pmic_regs; + struct input_dev *input_dev; + const struct of_device_id *of_id = + of_match_device(of_mtk_pmic_keys_match_tbl, &pdev->dev); + + keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL); + if (!keys) + return -ENOMEM; + + keys->dev = &pdev->dev; + keys->regmap = pmic_chip->regmap; + mtk_pmic_regs = of_id->data; + + keys->input_dev = input_dev = devm_input_allocate_device(keys->dev); + if (!input_dev) { + dev_err(keys->dev, "input allocate device fail.\n"); + return -ENOMEM; + } + + input_dev->name = "mtk-pmic-keys"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0001; + + keycount = of_get_available_child_count(node); + if (keycount > MTK_PMIC_MAX_KEY_COUNT) { + dev_err(keys->dev, "too many keys defined (%d)\n", keycount); + return -EINVAL; + } + + for_each_child_of_node(node, child) { + keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index]; + + keys->keys[index].irq = platform_get_irq(pdev, index); + if (keys->keys[index].irq < 0) + return keys->keys[index].irq; + + error = of_property_read_u32(child, + "linux,keycodes", &keys->keys[index].keycode); + if (error) { + dev_err(keys->dev, + "failed to read key:%d linux,keycode property: %d\n", + index, error); + return error; + } + + if (of_property_read_bool(child, "wakeup-source")) + keys->keys[index].wakeup = true; + + error = mtk_pmic_key_setup(keys, &keys->keys[index]); + if (error) + return error; + + index++; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, + "register input device failed (%d)\n", error); + return error; + } + + mtk_pmic_keys_lp_reset_setup(keys, mtk_pmic_regs->pmic_rst_reg); + + platform_set_drvdata(pdev, keys); + + return 0; +} + +static struct platform_driver pmic_keys_pdrv = { + .probe = mtk_pmic_keys_probe, + .driver = { + .name = "mtk-pmic-keys", + .of_match_table = of_mtk_pmic_keys_match_tbl, + .pm = &mtk_pmic_keys_pm_ops, + }, +}; + +module_platform_driver(pmic_keys_pdrv); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("MTK pmic-keys driver v0.1"); diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c new file mode 100644 index 000000000..de26e2df0 --- /dev/null +++ b/drivers/input/keyboard/newtonkbd.c @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2000 Justin Cormack + */ + +/* + * Newton keyboard driver for Linux + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "Newton keyboard driver" + +MODULE_AUTHOR("Justin Cormack <j.cormack@doc.ic.ac.uk>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define NKBD_KEY 0x7f +#define NKBD_PRESS 0x80 + +static unsigned char nkbd_keycode[128] = { + KEY_A, KEY_S, KEY_D, KEY_F, KEY_H, KEY_G, KEY_Z, KEY_X, + KEY_C, KEY_V, 0, KEY_B, KEY_Q, KEY_W, KEY_E, KEY_R, + KEY_Y, KEY_T, KEY_1, KEY_2, KEY_3, KEY_4, KEY_6, KEY_5, + KEY_EQUAL, KEY_9, KEY_7, KEY_MINUS, KEY_8, KEY_0, KEY_RIGHTBRACE, KEY_O, + KEY_U, KEY_LEFTBRACE, KEY_I, KEY_P, KEY_ENTER, KEY_L, KEY_J, KEY_APOSTROPHE, + KEY_K, KEY_SEMICOLON, KEY_BACKSLASH, KEY_COMMA, KEY_SLASH, KEY_N, KEY_M, KEY_DOT, + KEY_TAB, KEY_SPACE, KEY_GRAVE, KEY_DELETE, 0, 0, 0, KEY_LEFTMETA, + KEY_LEFTSHIFT, KEY_CAPSLOCK, KEY_LEFTALT, KEY_LEFTCTRL, KEY_RIGHTSHIFT, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0 +}; + +struct nkbd { + unsigned char keycode[128]; + struct input_dev *dev; + struct serio *serio; + char phys[32]; +}; + +static irqreturn_t nkbd_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct nkbd *nkbd = serio_get_drvdata(serio); + + /* invalid scan codes are probably the init sequence, so we ignore them */ + if (nkbd->keycode[data & NKBD_KEY]) { + input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); + input_sync(nkbd->dev); + } + + else if (data == 0xe7) /* end of init sequence */ + printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys); + return IRQ_HANDLED; + +} + +static int nkbd_connect(struct serio *serio, struct serio_driver *drv) +{ + struct nkbd *nkbd; + struct input_dev *input_dev; + int err = -ENOMEM; + int i; + + nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!nkbd || !input_dev) + goto fail1; + + nkbd->serio = serio; + nkbd->dev = input_dev; + snprintf(nkbd->phys, sizeof(nkbd->phys), "%s/input0", serio->phys); + memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); + + input_dev->name = "Newton Keyboard"; + input_dev->phys = nkbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_NEWTON; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycode = nkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode); + for (i = 0; i < 128; i++) + set_bit(nkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + + serio_set_drvdata(serio, nkbd); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(nkbd->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(nkbd); + return err; +} + +static void nkbd_disconnect(struct serio *serio) +{ + struct nkbd *nkbd = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(nkbd->dev); + kfree(nkbd); +} + +static const struct serio_device_id nkbd_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_NEWTON, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, nkbd_serio_ids); + +static struct serio_driver nkbd_drv = { + .driver = { + .name = "newtonkbd", + }, + .description = DRIVER_DESC, + .id_table = nkbd_serio_ids, + .interrupt = nkbd_interrupt, + .connect = nkbd_connect, + .disconnect = nkbd_disconnect, +}; + +module_serio_driver(nkbd_drv); diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c new file mode 100644 index 000000000..ae3b04557 --- /dev/null +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -0,0 +1,438 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson + * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * + * License terms:GNU General Public License (GPL) version 2 + * + * Keypad controller driver for the SKE (Scroll Key Encoder) module used in + * the Nomadik 8815 and Ux500 platforms. + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/module.h> + +#include <linux/platform_data/keypad-nomadik-ske.h> + +/* SKE_CR bits */ +#define SKE_KPMLT (0x1 << 6) +#define SKE_KPCN (0x7 << 3) +#define SKE_KPASEN (0x1 << 2) +#define SKE_KPASON (0x1 << 7) + +/* SKE_IMSC bits */ +#define SKE_KPIMA (0x1 << 2) + +/* SKE_ICR bits */ +#define SKE_KPICS (0x1 << 3) +#define SKE_KPICA (0x1 << 2) + +/* SKE_RIS bits */ +#define SKE_KPRISA (0x1 << 2) + +#define SKE_KEYPAD_ROW_SHIFT 3 +#define SKE_KPD_NUM_ROWS 8 +#define SKE_KPD_NUM_COLS 8 + +/* keypad auto scan registers */ +#define SKE_ASR0 0x20 +#define SKE_ASR1 0x24 +#define SKE_ASR2 0x28 +#define SKE_ASR3 0x2C + +#define SKE_NUM_ASRX_REGISTERS (4) +#define KEY_PRESSED_DELAY 10 + +/** + * struct ske_keypad - data structure used by keypad driver + * @irq: irq no + * @reg_base: ske registers base address + * @input: pointer to input device object + * @board: keypad platform device + * @keymap: matrix scan code table for keycodes + * @clk: clock structure pointer + */ +struct ske_keypad { + int irq; + void __iomem *reg_base; + struct input_dev *input; + const struct ske_keypad_platform_data *board; + unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; + struct clk *clk; + struct clk *pclk; + spinlock_t ske_keypad_lock; +}; + +static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, + u8 mask, u8 data) +{ + u32 ret; + + spin_lock(&keypad->ske_keypad_lock); + + ret = readl(keypad->reg_base + addr); + ret &= ~mask; + ret |= data; + writel(ret, keypad->reg_base + addr); + + spin_unlock(&keypad->ske_keypad_lock); +} + +/* + * ske_keypad_chip_init: init keypad controller configuration + * + * Enable Multi key press detection, auto scan mode + */ +static int __init ske_keypad_chip_init(struct ske_keypad *keypad) +{ + u32 value; + int timeout = keypad->board->debounce_ms; + + /* check SKE_RIS to be 0 */ + while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) + cpu_relax(); + + if (timeout == -1) + return -EINVAL; + + /* + * set debounce value + * keypad dbounce is configured in DBCR[15:8] + * dbounce value in steps of 32/32.768 ms + */ + spin_lock(&keypad->ske_keypad_lock); + value = readl(keypad->reg_base + SKE_DBCR); + value = value & 0xff; + value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; + writel(value, keypad->reg_base + SKE_DBCR); + spin_unlock(&keypad->ske_keypad_lock); + + /* enable multi key detection */ + ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); + + /* + * set up the number of columns + * KPCN[5:3] defines no. of keypad columns to be auto scanned + */ + value = (keypad->board->kcol - 1) << 3; + ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); + + /* clear keypad interrupt for auto(and pending SW) scans */ + ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); + + /* un-mask keypad interrupts */ + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + /* enable automatic scan */ + ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); + + return 0; +} + +static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) +{ + int row = 0, code, pos; + struct input_dev *input = keypad->input; + u32 ske_ris; + int key_pressed; + int num_of_rows; + + /* find out the row */ + num_of_rows = hweight8(status); + do { + pos = __ffs(status); + row = pos; + status &= ~(1 << pos); + + code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); + ske_ris = readl(keypad->reg_base + SKE_RIS); + key_pressed = ske_ris & SKE_KPRISA; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], key_pressed); + input_sync(input); + num_of_rows--; + } while (num_of_rows); +} + +static void ske_keypad_read_data(struct ske_keypad *keypad) +{ + u8 status; + int col = 0; + int ske_asr, i; + + /* + * Read the auto scan registers + * + * Each SKE_ASRx (x=0 to x=3) contains two row values. + * lower byte contains row value for column 2*x, + * upper byte contains row value for column 2*x + 1 + */ + for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { + ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); + if (!ske_asr) + continue; + + /* now that ASRx is zero, find out the coloumn x and row y */ + status = ske_asr & 0xff; + if (status) { + col = i * 2; + ske_keypad_report(keypad, status, col); + } + status = (ske_asr & 0xff00) >> 8; + if (status) { + col = (i * 2) + 1; + ske_keypad_report(keypad, status, col); + } + } +} + +static irqreturn_t ske_keypad_irq(int irq, void *dev_id) +{ + struct ske_keypad *keypad = dev_id; + int timeout = keypad->board->debounce_ms; + + /* disable auto scan interrupt; mask the interrupt generated */ + ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); + ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); + + while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) + cpu_relax(); + + /* SKEx registers are stable and can be read */ + ske_keypad_read_data(keypad); + + /* wait until raw interrupt is clear */ + while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) + msleep(KEY_PRESSED_DELAY); + + /* enable auto scan interrupts */ + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + return IRQ_HANDLED; +} + +static int __init ske_keypad_probe(struct platform_device *pdev) +{ + const struct ske_keypad_platform_data *plat = + dev_get_platdata(&pdev->dev); + struct ske_keypad *keypad; + struct input_dev *input; + struct resource *res; + int irq; + int error; + + if (!plat) { + dev_err(&pdev->dev, "invalid keypad platform data\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing platform resources\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL); + input = input_allocate_device(); + if (!keypad || !input) { + dev_err(&pdev->dev, "failed to allocate keypad memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + keypad->irq = irq; + keypad->board = plat; + keypad->input = input; + spin_lock_init(&keypad->ske_keypad_lock); + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto err_free_mem; + } + + keypad->reg_base = ioremap(res->start, resource_size(res)); + if (!keypad->reg_base) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto err_free_mem_region; + } + + keypad->pclk = clk_get(&pdev->dev, "apb_pclk"); + if (IS_ERR(keypad->pclk)) { + dev_err(&pdev->dev, "failed to get pclk\n"); + error = PTR_ERR(keypad->pclk); + goto err_iounmap; + } + + keypad->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get clk\n"); + error = PTR_ERR(keypad->clk); + goto err_pclk; + } + + input->id.bustype = BUS_HOST; + input->name = "ux500-ske-keypad"; + input->dev.parent = &pdev->dev; + + error = matrix_keypad_build_keymap(plat->keymap_data, NULL, + SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, + keypad->keymap, input); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + goto err_clk; + } + + input_set_capability(input, EV_MSC, MSC_SCAN); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + error = clk_prepare_enable(keypad->pclk); + if (error) { + dev_err(&pdev->dev, "Failed to prepare/enable pclk\n"); + goto err_clk; + } + + error = clk_prepare_enable(keypad->clk); + if (error) { + dev_err(&pdev->dev, "Failed to prepare/enable clk\n"); + goto err_pclk_disable; + } + + + /* go through board initialization helpers */ + if (keypad->board->init) + keypad->board->init(); + + error = ske_keypad_chip_init(keypad); + if (error) { + dev_err(&pdev->dev, "unable to init keypad hardware\n"); + goto err_clk_disable; + } + + error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq, + IRQF_ONESHOT, "ske-keypad", keypad); + if (error) { + dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); + goto err_clk_disable; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", error); + goto err_free_irq; + } + + if (plat->wakeup_enable) + device_init_wakeup(&pdev->dev, true); + + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_irq: + free_irq(keypad->irq, keypad); +err_clk_disable: + clk_disable_unprepare(keypad->clk); +err_pclk_disable: + clk_disable_unprepare(keypad->pclk); +err_clk: + clk_put(keypad->clk); +err_pclk: + clk_put(keypad->pclk); +err_iounmap: + iounmap(keypad->reg_base); +err_free_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input); + kfree(keypad); + return error; +} + +static int ske_keypad_remove(struct platform_device *pdev) +{ + struct ske_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + free_irq(keypad->irq, keypad); + + input_unregister_device(keypad->input); + + clk_disable_unprepare(keypad->clk); + clk_put(keypad->clk); + + if (keypad->board->exit) + keypad->board->exit(); + + iounmap(keypad->reg_base); + release_mem_region(res->start, resource_size(res)); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ske_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ske_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + enable_irq_wake(irq); + else + ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); + + return 0; +} + +static int ske_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ske_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + disable_irq_wake(irq); + else + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, + ske_keypad_suspend, ske_keypad_resume); + +static struct platform_driver ske_keypad_driver = { + .driver = { + .name = "nmk-ske-keypad", + .pm = &ske_keypad_dev_pm_ops, + }, + .remove = ske_keypad_remove, +}; + +module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>"); +MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); +MODULE_ALIAS("platform:nomadik-ske-keypad"); diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c new file mode 100644 index 000000000..cf138d836 --- /dev/null +++ b/drivers/input/keyboard/nspire-keypad.c @@ -0,0 +1,283 @@ +/* + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/input/matrix_keypad.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> + +#define KEYPAD_SCAN_MODE 0x00 +#define KEYPAD_CNTL 0x04 +#define KEYPAD_INT 0x08 +#define KEYPAD_INTMSK 0x0C + +#define KEYPAD_DATA 0x10 +#define KEYPAD_GPIO 0x30 + +#define KEYPAD_UNKNOWN_INT 0x40 +#define KEYPAD_UNKNOWN_INT_STS 0x44 + +#define KEYPAD_BITMASK_COLS 11 +#define KEYPAD_BITMASK_ROWS 8 + +struct nspire_keypad { + void __iomem *reg_base; + u32 int_mask; + + struct input_dev *input; + struct clk *clk; + + struct matrix_keymap_data *keymap; + int row_shift; + + /* Maximum delay estimated assuming 33MHz APB */ + u32 scan_interval; /* In microseconds (~2000us max) */ + u32 row_delay; /* In microseconds (~500us max) */ + + u16 state[KEYPAD_BITMASK_ROWS]; + + bool active_low; +}; + +static irqreturn_t nspire_keypad_irq(int irq, void *dev_id) +{ + struct nspire_keypad *keypad = dev_id; + struct input_dev *input = keypad->input; + unsigned short *keymap = input->keycode; + unsigned int code; + int row, col; + u32 int_sts; + u16 state[8]; + u16 bits, changed; + + int_sts = readl(keypad->reg_base + KEYPAD_INT) & keypad->int_mask; + if (!int_sts) + return IRQ_NONE; + + memcpy_fromio(state, keypad->reg_base + KEYPAD_DATA, sizeof(state)); + + for (row = 0; row < KEYPAD_BITMASK_ROWS; row++) { + bits = state[row]; + if (keypad->active_low) + bits = ~bits; + + changed = bits ^ keypad->state[row]; + if (!changed) + continue; + + keypad->state[row] = bits; + + for (col = 0; col < KEYPAD_BITMASK_COLS; col++) { + if (!(changed & (1U << col))) + continue; + + code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keymap[code], + bits & (1U << col)); + } + } + + input_sync(input); + + writel(0x3, keypad->reg_base + KEYPAD_INT); + + return IRQ_HANDLED; +} + +static int nspire_keypad_open(struct input_dev *input) +{ + struct nspire_keypad *keypad = input_get_drvdata(input); + unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles; + int error; + + error = clk_prepare_enable(keypad->clk); + if (error) + return error; + + cycles_per_us = (clk_get_rate(keypad->clk) / 1000000); + if (cycles_per_us == 0) + cycles_per_us = 1; + + delay_cycles = cycles_per_us * keypad->scan_interval; + WARN_ON(delay_cycles >= (1 << 16)); /* Overflow */ + delay_cycles &= 0xffff; + + row_delay_cycles = cycles_per_us * keypad->row_delay; + WARN_ON(row_delay_cycles >= (1 << 14)); /* Overflow */ + row_delay_cycles &= 0x3fff; + + val |= 3 << 0; /* Set scan mode to 3 (continuous scan) */ + val |= row_delay_cycles << 2; /* Delay between scanning each row */ + val |= delay_cycles << 16; /* Delay between scans */ + writel(val, keypad->reg_base + KEYPAD_SCAN_MODE); + + val = (KEYPAD_BITMASK_ROWS & 0xff) | (KEYPAD_BITMASK_COLS & 0xff)<<8; + writel(val, keypad->reg_base + KEYPAD_CNTL); + + /* Enable interrupts */ + keypad->int_mask = 1 << 1; + writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK); + + return 0; +} + +static void nspire_keypad_close(struct input_dev *input) +{ + struct nspire_keypad *keypad = input_get_drvdata(input); + + /* Disable interrupts */ + writel(0, keypad->reg_base + KEYPAD_INTMSK); + /* Acknowledge existing interrupts */ + writel(~0, keypad->reg_base + KEYPAD_INT); + + clk_disable_unprepare(keypad->clk); +} + +static int nspire_keypad_probe(struct platform_device *pdev) +{ + const struct device_node *of_node = pdev->dev.of_node; + struct nspire_keypad *keypad; + struct input_dev *input; + struct resource *res; + int irq; + int error; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + return -EINVAL; + } + + keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad), + GFP_KERNEL); + if (!keypad) { + dev_err(&pdev->dev, "failed to allocate keypad memory\n"); + return -ENOMEM; + } + + keypad->row_shift = get_count_order(KEYPAD_BITMASK_COLS); + + error = of_property_read_u32(of_node, "scan-interval", + &keypad->scan_interval); + if (error) { + dev_err(&pdev->dev, "failed to get scan-interval\n"); + return error; + } + + error = of_property_read_u32(of_node, "row-delay", + &keypad->row_delay); + if (error) { + dev_err(&pdev->dev, "failed to get row-delay\n"); + return error; + } + + keypad->active_low = of_property_read_bool(of_node, "active-low"); + + keypad->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "unable to get clock\n"); + return PTR_ERR(keypad->clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + keypad->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(keypad->reg_base)) + return PTR_ERR(keypad->reg_base); + + keypad->input = input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + error = clk_prepare_enable(keypad->clk); + if (error) { + dev_err(&pdev->dev, "failed to enable clock\n"); + return error; + } + + /* Disable interrupts */ + writel(0, keypad->reg_base + KEYPAD_INTMSK); + /* Acknowledge existing interrupts */ + writel(~0, keypad->reg_base + KEYPAD_INT); + + /* Disable GPIO interrupts to prevent hanging on touchpad */ + /* Possibly used to detect touchpad events */ + writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT); + /* Acknowledge existing GPIO interrupts */ + writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS); + + clk_disable_unprepare(keypad->clk); + + input_set_drvdata(input, keypad); + + input->id.bustype = BUS_HOST; + input->name = "nspire-keypad"; + input->open = nspire_keypad_open; + input->close = nspire_keypad_close; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_REP, input->evbit); + input_set_capability(input, EV_MSC, MSC_SCAN); + + error = matrix_keypad_build_keymap(NULL, NULL, + KEYPAD_BITMASK_ROWS, + KEYPAD_BITMASK_COLS, + NULL, input); + if (error) { + dev_err(&pdev->dev, "building keymap failed\n"); + return error; + } + + error = devm_request_irq(&pdev->dev, irq, nspire_keypad_irq, 0, + "nspire_keypad", keypad); + if (error) { + dev_err(&pdev->dev, "allocate irq %d failed\n", irq); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", error); + return error; + } + + dev_dbg(&pdev->dev, + "TI-NSPIRE keypad at %pR (scan_interval=%uus, row_delay=%uus%s)\n", + res, keypad->row_delay, keypad->scan_interval, + keypad->active_low ? ", active_low" : ""); + + return 0; +} + +static const struct of_device_id nspire_keypad_dt_match[] = { + { .compatible = "ti,nspire-keypad" }, + { }, +}; +MODULE_DEVICE_TABLE(of, nspire_keypad_dt_match); + +static struct platform_driver nspire_keypad_driver = { + .driver = { + .name = "nspire-keypad", + .of_match_table = nspire_keypad_dt_match, + }, + .probe = nspire_keypad_probe, +}; + +module_platform_driver(nspire_keypad_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TI-NSPIRE Keypad Driver"); diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c new file mode 100644 index 000000000..7bd107910 --- /dev/null +++ b/drivers/input/keyboard/omap-keypad.c @@ -0,0 +1,335 @@ +/* + * linux/drivers/input/keyboard/omap-keypad.c + * + * OMAP Keypad Driver + * + * Copyright (C) 2003 Nokia Corporation + * Written by Timo Teräs <ext-timo.teras@nokia.com> + * + * Added support for H2 & H3 Keypad + * Copyright (C) 2004 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/keypad-omap.h> + +#undef NEW_BOARD_LEARNING_MODE + +static void omap_kp_tasklet(unsigned long); +static void omap_kp_timer(struct timer_list *); + +static unsigned char keypad_state[8]; +static DEFINE_MUTEX(kp_enable_mutex); +static int kp_enable = 1; +static int kp_cur_group = -1; + +struct omap_kp { + struct input_dev *input; + struct timer_list timer; + int irq; + unsigned int rows; + unsigned int cols; + unsigned long delay; + unsigned int debounce; + unsigned short keymap[]; +}; + +static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0); + +static unsigned int *row_gpios; +static unsigned int *col_gpios; + +static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) +{ + /* disable keyboard interrupt and schedule for handling */ + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + + tasklet_schedule(&kp_tasklet); + + return IRQ_HANDLED; +} + +static void omap_kp_timer(struct timer_list *unused) +{ + tasklet_schedule(&kp_tasklet); +} + +static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state) +{ + int col = 0; + + /* disable keyboard interrupt and schedule for handling */ + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + + /* read the keypad status */ + omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + for (col = 0; col < omap_kp->cols; col++) { + omap_writew(~(1 << col) & 0xff, + OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + + udelay(omap_kp->delay); + + state[col] = ~omap_readw(OMAP1_MPUIO_BASE + + OMAP_MPUIO_KBR_LATCH) & 0xff; + } + omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + udelay(2); +} + +static void omap_kp_tasklet(unsigned long data) +{ + struct omap_kp *omap_kp_data = (struct omap_kp *) data; + unsigned short *keycodes = omap_kp_data->input->keycode; + unsigned int row_shift = get_count_order(omap_kp_data->cols); + unsigned char new_state[8], changed, key_down = 0; + int col, row; + + /* check for any changes */ + omap_kp_scan_keypad(omap_kp_data, new_state); + + /* check for changes and print those */ + for (col = 0; col < omap_kp_data->cols; col++) { + changed = new_state[col] ^ keypad_state[col]; + key_down |= new_state[col]; + if (changed == 0) + continue; + + for (row = 0; row < omap_kp_data->rows; row++) { + int key; + if (!(changed & (1 << row))) + continue; +#ifdef NEW_BOARD_LEARNING_MODE + printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col, + row, (new_state[col] & (1 << row)) ? + "pressed" : "released"); +#else + key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)]; + + if (!(kp_cur_group == (key & GROUP_MASK) || + kp_cur_group == -1)) + continue; + + kp_cur_group = key & GROUP_MASK; + input_report_key(omap_kp_data->input, key & ~GROUP_MASK, + new_state[col] & (1 << row)); +#endif + } + } + input_sync(omap_kp_data->input); + memcpy(keypad_state, new_state, sizeof(keypad_state)); + + if (key_down) { + /* some key is pressed - keep irq disabled and use timer + * to poll the keypad */ + mod_timer(&omap_kp_data->timer, jiffies + HZ / 20); + } else { + /* enable interrupts */ + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + kp_cur_group = -1; + } +} + +static ssize_t omap_kp_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", kp_enable); +} + +static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct omap_kp *omap_kp = dev_get_drvdata(dev); + int state; + + if (sscanf(buf, "%u", &state) != 1) + return -EINVAL; + + if ((state != 1) && (state != 0)) + return -EINVAL; + + mutex_lock(&kp_enable_mutex); + if (state != kp_enable) { + if (state) + enable_irq(omap_kp->irq); + else + disable_irq(omap_kp->irq); + kp_enable = state; + } + mutex_unlock(&kp_enable_mutex); + + return strnlen(buf, count); +} + +static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store); + +static int omap_kp_probe(struct platform_device *pdev) +{ + struct omap_kp *omap_kp; + struct input_dev *input_dev; + struct omap_kp_platform_data *pdata = dev_get_platdata(&pdev->dev); + int i, col_idx, row_idx, ret; + unsigned int row_shift, keycodemax; + + if (!pdata->rows || !pdata->cols || !pdata->keymap_data) { + printk(KERN_ERR "No rows, cols or keymap_data from pdata\n"); + return -EINVAL; + } + + row_shift = get_count_order(pdata->cols); + keycodemax = pdata->rows << row_shift; + + omap_kp = kzalloc(sizeof(struct omap_kp) + + keycodemax * sizeof(unsigned short), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!omap_kp || !input_dev) { + kfree(omap_kp); + input_free_device(input_dev); + return -ENOMEM; + } + + platform_set_drvdata(pdev, omap_kp); + + omap_kp->input = input_dev; + + /* Disable the interrupt for the MPUIO keyboard */ + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + + if (pdata->delay) + omap_kp->delay = pdata->delay; + + if (pdata->row_gpios && pdata->col_gpios) { + row_gpios = pdata->row_gpios; + col_gpios = pdata->col_gpios; + } + + omap_kp->rows = pdata->rows; + omap_kp->cols = pdata->cols; + + col_idx = 0; + row_idx = 0; + + timer_setup(&omap_kp->timer, omap_kp_timer, 0); + + /* get the irq and init timer*/ + kp_tasklet.data = (unsigned long) omap_kp; + tasklet_enable(&kp_tasklet); + + ret = device_create_file(&pdev->dev, &dev_attr_enable); + if (ret < 0) + goto err2; + + /* setup input device */ + input_dev->name = "omap-keypad"; + input_dev->phys = "omap-keypad/input0"; + input_dev->dev.parent = &pdev->dev; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + if (pdata->rep) + __set_bit(EV_REP, input_dev->evbit); + + ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL, + pdata->rows, pdata->cols, + omap_kp->keymap, input_dev); + if (ret < 0) + goto err3; + + ret = input_register_device(omap_kp->input); + if (ret < 0) { + printk(KERN_ERR "Unable to register omap-keypad input device\n"); + goto err3; + } + + if (pdata->dbounce) + omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING); + + /* scan current status and enable interrupt */ + omap_kp_scan_keypad(omap_kp, keypad_state); + omap_kp->irq = platform_get_irq(pdev, 0); + if (omap_kp->irq >= 0) { + if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, + "omap-keypad", omap_kp) < 0) + goto err4; + } + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + + return 0; + +err4: + input_unregister_device(omap_kp->input); + input_dev = NULL; +err3: + device_remove_file(&pdev->dev, &dev_attr_enable); +err2: + for (i = row_idx - 1; i >= 0; i--) + gpio_free(row_gpios[i]); + for (i = col_idx - 1; i >= 0; i--) + gpio_free(col_gpios[i]); + + kfree(omap_kp); + input_free_device(input_dev); + + return -EINVAL; +} + +static int omap_kp_remove(struct platform_device *pdev) +{ + struct omap_kp *omap_kp = platform_get_drvdata(pdev); + + /* disable keypad interrupt handling */ + tasklet_disable(&kp_tasklet); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + free_irq(omap_kp->irq, omap_kp); + + del_timer_sync(&omap_kp->timer); + tasklet_kill(&kp_tasklet); + + /* unregister everything */ + input_unregister_device(omap_kp->input); + + kfree(omap_kp); + + return 0; +} + +static struct platform_driver omap_kp_driver = { + .probe = omap_kp_probe, + .remove = omap_kp_remove, + .driver = { + .name = "omap-keypad", + }, +}; +module_platform_driver(omap_kp_driver); + +MODULE_AUTHOR("Timo Teräs"); +MODULE_DESCRIPTION("OMAP Keypad Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap-keypad"); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c new file mode 100644 index 000000000..adb1ecc96 --- /dev/null +++ b/drivers/input/keyboard/omap4-keypad.c @@ -0,0 +1,487 @@ +/* + * OMAP4 Keypad Driver + * + * Copyright (C) 2010 Texas Instruments + * + * Author: Abraham Arce <x0066660@ti.com> + * Initial Code: Syed Rafiuddin <rafiuddin.syed@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> + +/* OMAP4 registers */ +#define OMAP4_KBD_REVISION 0x00 +#define OMAP4_KBD_SYSCONFIG 0x10 +#define OMAP4_KBD_SYSSTATUS 0x14 +#define OMAP4_KBD_IRQSTATUS 0x18 +#define OMAP4_KBD_IRQENABLE 0x1C +#define OMAP4_KBD_WAKEUPENABLE 0x20 +#define OMAP4_KBD_PENDING 0x24 +#define OMAP4_KBD_CTRL 0x28 +#define OMAP4_KBD_DEBOUNCINGTIME 0x2C +#define OMAP4_KBD_LONGKEYTIME 0x30 +#define OMAP4_KBD_TIMEOUT 0x34 +#define OMAP4_KBD_STATEMACHINE 0x38 +#define OMAP4_KBD_ROWINPUTS 0x3C +#define OMAP4_KBD_COLUMNOUTPUTS 0x40 +#define OMAP4_KBD_FULLCODE31_0 0x44 +#define OMAP4_KBD_FULLCODE63_32 0x48 + +/* OMAP4 bit definitions */ +#define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0) +#define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1) +#define OMAP4_DEF_WUP_EVENT_ENA BIT(0) +#define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1) +#define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1) +#define OMAP4_DEF_CTRL_PTV_SHIFT 2 + +/* OMAP4 values */ +#define OMAP4_VAL_IRQDISABLE 0x0 + +/* + * Errata i689: If a key is released for a time shorter than debounce time, + * the keyboard will idle and never detect the key release. The workaround + * is to use at least a 12ms debounce time. See omap5432 TRM chapter + * "26.4.6.2 Keyboard Controller Timer" for more information. + */ +#define OMAP4_KEYPAD_PTV_DIV_128 0x6 +#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv) \ + ((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1) +#define OMAP4_VAL_DEBOUNCINGTIME_16MS \ + OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128) + +enum { + KBD_REVISION_OMAP4 = 0, + KBD_REVISION_OMAP5, +}; + +struct omap4_keypad { + struct input_dev *input; + + void __iomem *base; + bool irq_wake_enabled; + unsigned int irq; + + unsigned int rows; + unsigned int cols; + u32 reg_offset; + u32 irqreg_offset; + unsigned int row_shift; + bool no_autorepeat; + unsigned char key_state[8]; + unsigned short *keymap; +}; + +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) +{ + return __raw_readl(keypad_data->base + + keypad_data->reg_offset + offset); +} + +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) +{ + __raw_writel(value, + keypad_data->base + keypad_data->reg_offset + offset); +} + +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) +{ + return __raw_readl(keypad_data->base + + keypad_data->irqreg_offset + offset); +} + +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, + u32 offset, u32 value) +{ + __raw_writel(value, + keypad_data->base + keypad_data->irqreg_offset + offset); +} + + +/* Interrupt handlers */ +static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) +{ + struct omap4_keypad *keypad_data = dev_id; + + if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) + return IRQ_WAKE_THREAD; + + return IRQ_NONE; +} + +static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) +{ + struct omap4_keypad *keypad_data = dev_id; + struct input_dev *input_dev = keypad_data->input; + unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)]; + unsigned int col, row, code, changed; + u32 *new_state = (u32 *) key_state; + + *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); + *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); + + for (row = 0; row < keypad_data->rows; row++) { + changed = key_state[row] ^ keypad_data->key_state[row]; + if (!changed) + continue; + + for (col = 0; col < keypad_data->cols; col++) { + if (changed & (1 << col)) { + code = MATRIX_SCAN_CODE(row, col, + keypad_data->row_shift); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad_data->keymap[code], + key_state[row] & (1 << col)); + } + } + } + + input_sync(input_dev); + + memcpy(keypad_data->key_state, key_state, + sizeof(keypad_data->key_state)); + + /* clear pending interrupts */ + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); + + return IRQ_HANDLED; +} + +static int omap4_keypad_open(struct input_dev *input) +{ + struct omap4_keypad *keypad_data = input_get_drvdata(input); + + pm_runtime_get_sync(input->dev.parent); + + disable_irq(keypad_data->irq); + + kbd_writel(keypad_data, OMAP4_KBD_CTRL, + OMAP4_DEF_CTRL_NOSOFTMODE | + (OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT)); + kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, + OMAP4_VAL_DEBOUNCINGTIME_16MS); + /* clear pending interrupts */ + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_DEF_IRQENABLE_EVENTEN | + OMAP4_DEF_IRQENABLE_LONGKEY); + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, + OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); + + enable_irq(keypad_data->irq); + + return 0; +} + +static void omap4_keypad_stop(struct omap4_keypad *keypad_data) +{ + /* Disable interrupts and wake-up events */ + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_VAL_IRQDISABLE); + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0); + + /* clear pending interrupts */ + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); +} + +static void omap4_keypad_close(struct input_dev *input) +{ + struct omap4_keypad *keypad_data; + + keypad_data = input_get_drvdata(input); + disable_irq(keypad_data->irq); + omap4_keypad_stop(keypad_data); + enable_irq(keypad_data->irq); + + pm_runtime_put_sync(input->dev.parent); +} + +static int omap4_keypad_parse_dt(struct device *dev, + struct omap4_keypad *keypad_data) +{ + struct device_node *np = dev->of_node; + int err; + + err = matrix_keypad_parse_properties(dev, &keypad_data->rows, + &keypad_data->cols); + if (err) + return err; + + if (of_get_property(np, "linux,input-no-autorepeat", NULL)) + keypad_data->no_autorepeat = true; + + return 0; +} + +static int omap4_keypad_check_revision(struct device *dev, + struct omap4_keypad *keypad_data) +{ + unsigned int rev; + + rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); + rev &= 0x03 << 30; + rev >>= 30; + switch (rev) { + case KBD_REVISION_OMAP4: + keypad_data->reg_offset = 0x00; + keypad_data->irqreg_offset = 0x00; + break; + case KBD_REVISION_OMAP5: + keypad_data->reg_offset = 0x10; + keypad_data->irqreg_offset = 0x0c; + break; + default: + dev_err(dev, "Keypad reports unsupported revision %d", rev); + return -EINVAL; + } + + return 0; +} + +static int omap4_keypad_probe(struct platform_device *pdev) +{ + struct omap4_keypad *keypad_data; + struct input_dev *input_dev; + struct resource *res; + unsigned int max_keys; + int irq; + int error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no base address specified\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL); + if (!keypad_data) { + dev_err(&pdev->dev, "keypad_data memory allocation failed\n"); + return -ENOMEM; + } + + keypad_data->irq = irq; + + error = omap4_keypad_parse_dt(&pdev->dev, keypad_data); + if (error) + goto err_free_keypad; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "can't request mem region\n"); + error = -EBUSY; + goto err_free_keypad; + } + + keypad_data->base = ioremap(res->start, resource_size(res)); + if (!keypad_data->base) { + dev_err(&pdev->dev, "can't ioremap mem resource\n"); + error = -ENOMEM; + goto err_release_mem; + } + + pm_runtime_enable(&pdev->dev); + + /* + * Enable clocks for the keypad module so that we can read + * revision register. + */ + error = pm_runtime_get_sync(&pdev->dev); + if (error) { + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); + pm_runtime_put_noidle(&pdev->dev); + } else { + error = omap4_keypad_check_revision(&pdev->dev, + keypad_data); + if (!error) { + /* Ensure device does not raise interrupts */ + omap4_keypad_stop(keypad_data); + } + pm_runtime_put_sync(&pdev->dev); + } + if (error) + goto err_pm_disable; + + /* input device allocation */ + keypad_data->input = input_dev = input_allocate_device(); + if (!input_dev) { + error = -ENOMEM; + goto err_pm_disable; + } + + input_dev->name = pdev->name; + input_dev->dev.parent = &pdev->dev; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0001; + + input_dev->open = omap4_keypad_open; + input_dev->close = omap4_keypad_close; + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + if (!keypad_data->no_autorepeat) + __set_bit(EV_REP, input_dev->evbit); + + input_set_drvdata(input_dev, keypad_data); + + keypad_data->row_shift = get_count_order(keypad_data->cols); + max_keys = keypad_data->rows << keypad_data->row_shift; + keypad_data->keymap = kcalloc(max_keys, + sizeof(keypad_data->keymap[0]), + GFP_KERNEL); + if (!keypad_data->keymap) { + dev_err(&pdev->dev, "Not enough memory for keymap\n"); + error = -ENOMEM; + goto err_free_input; + } + + error = matrix_keypad_build_keymap(NULL, NULL, + keypad_data->rows, keypad_data->cols, + keypad_data->keymap, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err_free_keymap; + } + + error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler, + omap4_keypad_irq_thread_fn, IRQF_ONESHOT, + "omap4-keypad", keypad_data); + if (error) { + dev_err(&pdev->dev, "failed to register interrupt\n"); + goto err_free_keymap; + } + + error = input_register_device(keypad_data->input); + if (error < 0) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto err_free_irq; + } + + device_init_wakeup(&pdev->dev, true); + platform_set_drvdata(pdev, keypad_data); + + return 0; + +err_free_irq: + free_irq(keypad_data->irq, keypad_data); +err_free_keymap: + kfree(keypad_data->keymap); +err_free_input: + input_free_device(input_dev); +err_pm_disable: + pm_runtime_disable(&pdev->dev); + iounmap(keypad_data->base); +err_release_mem: + release_mem_region(res->start, resource_size(res)); +err_free_keypad: + kfree(keypad_data); + return error; +} + +static int omap4_keypad_remove(struct platform_device *pdev) +{ + struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(keypad_data->irq, keypad_data); + + pm_runtime_disable(&pdev->dev); + + input_unregister_device(keypad_data->input); + + iounmap(keypad_data->base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(keypad_data->keymap); + kfree(keypad_data); + + return 0; +} + +static const struct of_device_id omap_keypad_dt_match[] = { + { .compatible = "ti,omap4-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_keypad_dt_match); + +#ifdef CONFIG_PM_SLEEP +static int omap4_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); + int error; + + if (device_may_wakeup(&pdev->dev)) { + error = enable_irq_wake(keypad_data->irq); + if (!error) + keypad_data->irq_wake_enabled = true; + } + + return 0; +} + +static int omap4_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev) && keypad_data->irq_wake_enabled) { + disable_irq_wake(keypad_data->irq); + keypad_data->irq_wake_enabled = false; + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(omap4_keypad_pm_ops, + omap4_keypad_suspend, omap4_keypad_resume); + +static struct platform_driver omap4_keypad_driver = { + .probe = omap4_keypad_probe, + .remove = omap4_keypad_remove, + .driver = { + .name = "omap4-keypad", + .pm = &omap4_keypad_pm_ops, + .of_match_table = omap_keypad_dt_match, + }, +}; +module_platform_driver(omap4_keypad_driver); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("OMAP4 Keypad Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap4-keypad"); diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c new file mode 100644 index 000000000..d62b4068c --- /dev/null +++ b/drivers/input/keyboard/opencores-kbd.c @@ -0,0 +1,126 @@ +/* + * OpenCores Keyboard Controller Driver + * http://www.opencores.org/project,keyboardcontroller + * + * Copyright 2007-2009 HV Sistemas S.L. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct opencores_kbd { + struct input_dev *input; + void __iomem *addr; + int irq; + unsigned short keycodes[128]; +}; + +static irqreturn_t opencores_kbd_isr(int irq, void *dev_id) +{ + struct opencores_kbd *opencores_kbd = dev_id; + struct input_dev *input = opencores_kbd->input; + unsigned char c; + + c = readb(opencores_kbd->addr); + input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1); + input_sync(input); + + return IRQ_HANDLED; +} + +static int opencores_kbd_probe(struct platform_device *pdev) +{ + struct input_dev *input; + struct opencores_kbd *opencores_kbd; + struct resource *res; + int irq, i, error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing board memory resource\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing board IRQ resource\n"); + return -EINVAL; + } + + opencores_kbd = devm_kzalloc(&pdev->dev, sizeof(*opencores_kbd), + GFP_KERNEL); + if (!opencores_kbd) + return -ENOMEM; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + opencores_kbd->input = input; + + opencores_kbd->addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(opencores_kbd->addr)) + return PTR_ERR(opencores_kbd->addr); + + input->name = pdev->name; + input->phys = "opencores-kbd/input0"; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + input->keycode = opencores_kbd->keycodes; + input->keycodesize = sizeof(opencores_kbd->keycodes[0]); + input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes); + + __set_bit(EV_KEY, input->evbit); + + for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) { + /* + * OpenCores controller happens to have scancodes match + * our KEY_* definitions. + */ + opencores_kbd->keycodes[i] = i; + __set_bit(opencores_kbd->keycodes[i], input->keybit); + } + __clear_bit(KEY_RESERVED, input->keybit); + + error = devm_request_irq(&pdev->dev, irq, &opencores_kbd_isr, + IRQF_TRIGGER_RISING, + pdev->name, opencores_kbd); + if (error) { + dev_err(&pdev->dev, "unable to claim irq %d\n", irq); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "unable to register input device\n"); + return error; + } + + return 0; +} + +static struct platform_driver opencores_kbd_device_driver = { + .probe = opencores_kbd_probe, + .driver = { + .name = "opencores-kbd", + }, +}; +module_platform_driver(opencores_kbd_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>"); +MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller"); diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c new file mode 100644 index 000000000..98b24ed18 --- /dev/null +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -0,0 +1,701 @@ +/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/input/matrix_keypad.h> + +#define PM8XXX_MAX_ROWS 18 +#define PM8XXX_MAX_COLS 8 +#define PM8XXX_ROW_SHIFT 3 +#define PM8XXX_MATRIX_MAX_SIZE (PM8XXX_MAX_ROWS * PM8XXX_MAX_COLS) + +#define PM8XXX_MIN_ROWS 5 +#define PM8XXX_MIN_COLS 5 + +#define MAX_SCAN_DELAY 128 +#define MIN_SCAN_DELAY 1 + +/* in nanoseconds */ +#define MAX_ROW_HOLD_DELAY 122000 +#define MIN_ROW_HOLD_DELAY 30500 + +#define MAX_DEBOUNCE_TIME 20 +#define MIN_DEBOUNCE_TIME 5 + +#define KEYP_CTRL 0x148 + +#define KEYP_CTRL_EVNTS BIT(0) +#define KEYP_CTRL_EVNTS_MASK 0x3 + +#define KEYP_CTRL_SCAN_COLS_SHIFT 5 +#define KEYP_CTRL_SCAN_COLS_MIN 5 +#define KEYP_CTRL_SCAN_COLS_BITS 0x3 + +#define KEYP_CTRL_SCAN_ROWS_SHIFT 2 +#define KEYP_CTRL_SCAN_ROWS_MIN 5 +#define KEYP_CTRL_SCAN_ROWS_BITS 0x7 + +#define KEYP_CTRL_KEYP_EN BIT(7) + +#define KEYP_SCAN 0x149 + +#define KEYP_SCAN_READ_STATE BIT(0) +#define KEYP_SCAN_DBOUNCE_SHIFT 1 +#define KEYP_SCAN_PAUSE_SHIFT 3 +#define KEYP_SCAN_ROW_HOLD_SHIFT 6 + +#define KEYP_TEST 0x14A + +#define KEYP_TEST_CLEAR_RECENT_SCAN BIT(6) +#define KEYP_TEST_CLEAR_OLD_SCAN BIT(5) +#define KEYP_TEST_READ_RESET BIT(4) +#define KEYP_TEST_DTEST_EN BIT(3) +#define KEYP_TEST_ABORT_READ BIT(0) + +#define KEYP_TEST_DBG_SELECT_SHIFT 1 + +/* bits of these registers represent + * '0' for key press + * '1' for key release + */ +#define KEYP_RECENT_DATA 0x14B +#define KEYP_OLD_DATA 0x14C + +#define KEYP_CLOCK_FREQ 32768 + +/** + * struct pmic8xxx_kp - internal keypad data structure + * @num_cols - number of columns of keypad + * @num_rows - number of row of keypad + * @input - input device pointer for keypad + * @regmap - regmap handle + * @key_sense_irq - key press/release irq number + * @key_stuck_irq - key stuck notification irq number + * @keycodes - array to hold the key codes + * @dev - parent device pointer + * @keystate - present key press/release state + * @stuckstate - present state when key stuck irq + * @ctrl_reg - control register value + */ +struct pmic8xxx_kp { + unsigned int num_rows; + unsigned int num_cols; + struct input_dev *input; + struct regmap *regmap; + int key_sense_irq; + int key_stuck_irq; + + unsigned short keycodes[PM8XXX_MATRIX_MAX_SIZE]; + + struct device *dev; + u16 keystate[PM8XXX_MAX_ROWS]; + u16 stuckstate[PM8XXX_MAX_ROWS]; + + u8 ctrl_reg; +}; + +static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col) +{ + /* all keys pressed on that particular row? */ + if (col == 0x00) + return 1 << kp->num_cols; + else + return col & ((1 << kp->num_cols) - 1); +} + +/* + * Synchronous read protocol for RevB0 onwards: + * + * 1. Write '1' to ReadState bit in KEYP_SCAN register + * 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode + * synchronously + * 3. Read rows in old array first if events are more than one + * 4. Read rows in recent array + * 5. Wait 4*32KHz clocks + * 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can + * synchronously exit read mode. + */ +static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp) +{ + int rc; + unsigned int scan_val; + + rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val); + if (rc < 0) { + dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); + return rc; + } + + scan_val |= 0x1; + + rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); + if (rc < 0) { + dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); + return rc; + } + + /* 2 * 32KHz clocks */ + udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); + + return rc; +} + +static int pmic8xxx_kp_read_data(struct pmic8xxx_kp *kp, u16 *state, + u16 data_reg, int read_rows) +{ + int rc, row; + unsigned int val; + + for (row = 0; row < read_rows; row++) { + rc = regmap_read(kp->regmap, data_reg, &val); + if (rc) + return rc; + dev_dbg(kp->dev, "%d = %d\n", row, val); + state[row] = pmic8xxx_col_state(kp, val); + } + + return 0; +} + +static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state, + u16 *old_state) +{ + int rc, read_rows; + unsigned int scan_val; + + if (kp->num_rows < PM8XXX_MIN_ROWS) + read_rows = PM8XXX_MIN_ROWS; + else + read_rows = kp->num_rows; + + pmic8xxx_chk_sync_read(kp); + + if (old_state) { + rc = pmic8xxx_kp_read_data(kp, old_state, KEYP_OLD_DATA, + read_rows); + if (rc < 0) { + dev_err(kp->dev, + "Error reading KEYP_OLD_DATA, rc=%d\n", rc); + return rc; + } + } + + rc = pmic8xxx_kp_read_data(kp, new_state, KEYP_RECENT_DATA, + read_rows); + if (rc < 0) { + dev_err(kp->dev, + "Error reading KEYP_RECENT_DATA, rc=%d\n", rc); + return rc; + } + + /* 4 * 32KHz clocks */ + udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); + + rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val); + if (rc < 0) { + dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); + return rc; + } + + scan_val &= 0xFE; + rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); + if (rc < 0) + dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); + + return rc; +} + +static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state, + u16 *old_state) +{ + int row, col, code; + + for (row = 0; row < kp->num_rows; row++) { + int bits_changed = new_state[row] ^ old_state[row]; + + if (!bits_changed) + continue; + + for (col = 0; col < kp->num_cols; col++) { + if (!(bits_changed & (1 << col))) + continue; + + dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col, + !(new_state[row] & (1 << col)) ? + "pressed" : "released"); + + code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT); + + input_event(kp->input, EV_MSC, MSC_SCAN, code); + input_report_key(kp->input, + kp->keycodes[code], + !(new_state[row] & (1 << col))); + + input_sync(kp->input); + } + } +} + +static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state) +{ + int row, found_first = -1; + u16 check, row_state; + + check = 0; + for (row = 0; row < kp->num_rows; row++) { + row_state = (~new_state[row]) & + ((1 << kp->num_cols) - 1); + + if (hweight16(row_state) > 1) { + if (found_first == -1) + found_first = row; + if (check & row_state) { + dev_dbg(kp->dev, "detected ghost key on row[%d]" + " and row[%d]\n", found_first, row); + return true; + } + } + check |= row_state; + } + return false; +} + +static int pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, unsigned int events) +{ + u16 new_state[PM8XXX_MAX_ROWS]; + u16 old_state[PM8XXX_MAX_ROWS]; + int rc; + + switch (events) { + case 0x1: + rc = pmic8xxx_kp_read_matrix(kp, new_state, NULL); + if (rc < 0) + return rc; + + /* detecting ghost key is not an error */ + if (pmic8xxx_detect_ghost_keys(kp, new_state)) + return 0; + __pmic8xxx_kp_scan_matrix(kp, new_state, kp->keystate); + memcpy(kp->keystate, new_state, sizeof(new_state)); + break; + case 0x3: /* two events - eventcounter is gray-coded */ + rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); + if (rc < 0) + return rc; + + __pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate); + __pmic8xxx_kp_scan_matrix(kp, new_state, old_state); + memcpy(kp->keystate, new_state, sizeof(new_state)); + break; + case 0x2: + dev_dbg(kp->dev, "Some key events were lost\n"); + rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); + if (rc < 0) + return rc; + __pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate); + __pmic8xxx_kp_scan_matrix(kp, new_state, old_state); + memcpy(kp->keystate, new_state, sizeof(new_state)); + break; + default: + rc = -EINVAL; + } + return rc; +} + +/* + * NOTE: We are reading recent and old data registers blindly + * whenever key-stuck interrupt happens, because events counter doesn't + * get updated when this interrupt happens due to key stuck doesn't get + * considered as key state change. + * + * We are not using old data register contents after they are being read + * because it might report the key which was pressed before the key being stuck + * as stuck key because it's pressed status is stored in the old data + * register. + */ +static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data) +{ + u16 new_state[PM8XXX_MAX_ROWS]; + u16 old_state[PM8XXX_MAX_ROWS]; + int rc; + struct pmic8xxx_kp *kp = data; + + rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); + if (rc < 0) { + dev_err(kp->dev, "failed to read keypad matrix\n"); + return IRQ_HANDLED; + } + + __pmic8xxx_kp_scan_matrix(kp, new_state, kp->stuckstate); + + return IRQ_HANDLED; +} + +static irqreturn_t pmic8xxx_kp_irq(int irq, void *data) +{ + struct pmic8xxx_kp *kp = data; + unsigned int ctrl_val, events; + int rc; + + rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val); + if (rc < 0) { + dev_err(kp->dev, "failed to read keyp_ctrl register\n"); + return IRQ_HANDLED; + } + + events = ctrl_val & KEYP_CTRL_EVNTS_MASK; + + rc = pmic8xxx_kp_scan_matrix(kp, events); + if (rc < 0) + dev_err(kp->dev, "failed to scan matrix\n"); + + return IRQ_HANDLED; +} + +static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp, + struct platform_device *pdev) +{ + const struct device_node *of_node = pdev->dev.of_node; + unsigned int scan_delay_ms; + unsigned int row_hold_ns; + unsigned int debounce_ms; + int bits, rc, cycles; + u8 scan_val = 0, ctrl_val = 0; + static const u8 row_bits[] = { + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7, + }; + + /* Find column bits */ + if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN) + bits = 0; + else + bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN; + ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) << + KEYP_CTRL_SCAN_COLS_SHIFT; + + /* Find row bits */ + if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) + bits = 0; + else + bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; + + ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT); + + rc = regmap_write(kp->regmap, KEYP_CTRL, ctrl_val); + if (rc < 0) { + dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); + return rc; + } + + if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms)) + scan_delay_ms = MIN_SCAN_DELAY; + + if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY || + !is_power_of_2(scan_delay_ms)) { + dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); + return -EINVAL; + } + + if (of_property_read_u32(of_node, "row-hold", &row_hold_ns)) + row_hold_ns = MIN_ROW_HOLD_DELAY; + + if (row_hold_ns > MAX_ROW_HOLD_DELAY || + row_hold_ns < MIN_ROW_HOLD_DELAY || + ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { + dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); + return -EINVAL; + } + + if (of_property_read_u32(of_node, "debounce", &debounce_ms)) + debounce_ms = MIN_DEBOUNCE_TIME; + + if (((debounce_ms % 5) != 0) || + debounce_ms > MAX_DEBOUNCE_TIME || + debounce_ms < MIN_DEBOUNCE_TIME) { + dev_err(&pdev->dev, "invalid debounce time supplied\n"); + return -EINVAL; + } + + bits = (debounce_ms / 5) - 1; + + scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT); + + bits = fls(scan_delay_ms) - 1; + scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT); + + /* Row hold time is a multiple of 32KHz cycles. */ + cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; + + scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT); + + rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); + if (rc) + dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); + + return rc; + +} + +static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp) +{ + int rc; + + kp->ctrl_reg |= KEYP_CTRL_KEYP_EN; + + rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg); + if (rc < 0) + dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); + + return rc; +} + +static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp) +{ + int rc; + + kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN; + + rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg); + if (rc < 0) + return rc; + + return rc; +} + +static int pmic8xxx_kp_open(struct input_dev *dev) +{ + struct pmic8xxx_kp *kp = input_get_drvdata(dev); + + return pmic8xxx_kp_enable(kp); +} + +static void pmic8xxx_kp_close(struct input_dev *dev) +{ + struct pmic8xxx_kp *kp = input_get_drvdata(dev); + + pmic8xxx_kp_disable(kp); +} + +/* + * keypad controller should be initialized in the following sequence + * only, otherwise it might get into FSM stuck state. + * + * - Initialize keypad control parameters, like no. of rows, columns, + * timing values etc., + * - configure rows and column gpios pull up/down. + * - set irq edge type. + * - enable the keypad controller. + */ +static int pmic8xxx_kp_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + unsigned int rows, cols; + bool repeat; + bool wakeup; + struct pmic8xxx_kp *kp; + int rc; + unsigned int ctrl_val; + + rc = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols); + if (rc) + return rc; + + if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS || + cols < PM8XXX_MIN_COLS) { + dev_err(&pdev->dev, "invalid platform data\n"); + return -EINVAL; + } + + repeat = !of_property_read_bool(np, "linux,input-no-autorepeat"); + + wakeup = of_property_read_bool(np, "wakeup-source") || + /* legacy name */ + of_property_read_bool(np, "linux,keypad-wakeup"); + + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); + if (!kp) + return -ENOMEM; + + kp->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!kp->regmap) + return -ENODEV; + + platform_set_drvdata(pdev, kp); + + kp->num_rows = rows; + kp->num_cols = cols; + kp->dev = &pdev->dev; + + kp->input = devm_input_allocate_device(&pdev->dev); + if (!kp->input) { + dev_err(&pdev->dev, "unable to allocate input device\n"); + return -ENOMEM; + } + + kp->key_sense_irq = platform_get_irq(pdev, 0); + if (kp->key_sense_irq < 0) { + dev_err(&pdev->dev, "unable to get keypad sense irq\n"); + return kp->key_sense_irq; + } + + kp->key_stuck_irq = platform_get_irq(pdev, 1); + if (kp->key_stuck_irq < 0) { + dev_err(&pdev->dev, "unable to get keypad stuck irq\n"); + return kp->key_stuck_irq; + } + + kp->input->name = "PMIC8XXX keypad"; + kp->input->phys = "pmic8xxx_keypad/input0"; + + kp->input->id.bustype = BUS_I2C; + kp->input->id.version = 0x0001; + kp->input->id.product = 0x0001; + kp->input->id.vendor = 0x0001; + + kp->input->open = pmic8xxx_kp_open; + kp->input->close = pmic8xxx_kp_close; + + rc = matrix_keypad_build_keymap(NULL, NULL, + PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS, + kp->keycodes, kp->input); + if (rc) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return rc; + } + + if (repeat) + __set_bit(EV_REP, kp->input->evbit); + input_set_capability(kp->input, EV_MSC, MSC_SCAN); + + input_set_drvdata(kp->input, kp); + + /* initialize keypad state */ + memset(kp->keystate, 0xff, sizeof(kp->keystate)); + memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate)); + + rc = pmic8xxx_kpd_init(kp, pdev); + if (rc < 0) { + dev_err(&pdev->dev, "unable to initialize keypad controller\n"); + return rc; + } + + rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq, + pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad", + kp); + if (rc < 0) { + dev_err(&pdev->dev, "failed to request keypad sense irq\n"); + return rc; + } + + rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq, + pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING, + "pmic-keypad-stuck", kp); + if (rc < 0) { + dev_err(&pdev->dev, "failed to request keypad stuck irq\n"); + return rc; + } + + rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val); + if (rc < 0) { + dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n"); + return rc; + } + + kp->ctrl_reg = ctrl_val; + + rc = input_register_device(kp->input); + if (rc < 0) { + dev_err(&pdev->dev, "unable to register keypad input device\n"); + return rc; + } + + device_init_wakeup(&pdev->dev, wakeup); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pmic8xxx_kp_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); + struct input_dev *input_dev = kp->input; + + if (device_may_wakeup(dev)) { + enable_irq_wake(kp->key_sense_irq); + } else { + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + pmic8xxx_kp_disable(kp); + + mutex_unlock(&input_dev->mutex); + } + + return 0; +} + +static int pmic8xxx_kp_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); + struct input_dev *input_dev = kp->input; + + if (device_may_wakeup(dev)) { + disable_irq_wake(kp->key_sense_irq); + } else { + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + pmic8xxx_kp_enable(kp); + + mutex_unlock(&input_dev->mutex); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops, + pmic8xxx_kp_suspend, pmic8xxx_kp_resume); + +static const struct of_device_id pm8xxx_match_table[] = { + { .compatible = "qcom,pm8058-keypad" }, + { .compatible = "qcom,pm8921-keypad" }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8xxx_match_table); + +static struct platform_driver pmic8xxx_kp_driver = { + .probe = pmic8xxx_kp_probe, + .driver = { + .name = "pm8xxx-keypad", + .pm = &pm8xxx_kp_pm_ops, + .of_match_table = pm8xxx_match_table, + }, +}; +module_platform_driver(pmic8xxx_kp_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("PMIC8XXX keypad driver"); +MODULE_ALIAS("platform:pmic8xxx_keypad"); +MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>"); diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c new file mode 100644 index 000000000..d0bdaeadf --- /dev/null +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -0,0 +1,846 @@ +/* + * linux/drivers/input/keyboard/pxa27x_keypad.c + * + * Driver for the pxa27x matrix keyboard controller. + * + * Created: Feb 22, 2007 + * Author: Rodolfo Giometti <giometti@linux.it> + * + * Based on a previous implementations by Kevin O'Connor + * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and + * on some suggestions by Nicolas Pitre <nico@fluxnic.net>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/input/matrix_keypad.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include <linux/platform_data/keypad-pxa27x.h> +/* + * Keypad Controller registers + */ +#define KPC 0x0000 /* Keypad Control register */ +#define KPDK 0x0008 /* Keypad Direct Key register */ +#define KPREC 0x0010 /* Keypad Rotary Encoder register */ +#define KPMK 0x0018 /* Keypad Matrix Key register */ +#define KPAS 0x0020 /* Keypad Automatic Scan register */ + +/* Keypad Automatic Scan Multiple Key Presser register 0-3 */ +#define KPASMKP0 0x0028 +#define KPASMKP1 0x0030 +#define KPASMKP2 0x0038 +#define KPASMKP3 0x0040 +#define KPKDI 0x0048 + +/* bit definitions */ +#define KPC_MKRN(n) ((((n) - 1) & 0x7) << 26) /* matrix key row number */ +#define KPC_MKCN(n) ((((n) - 1) & 0x7) << 23) /* matrix key column number */ +#define KPC_DKN(n) ((((n) - 1) & 0x7) << 6) /* direct key number */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ + +#define KPC_MS(n) (0x1 << (13 + (n))) /* Matrix scan line 'n' */ +#define KPC_MS_ALL (0xff << 13) + +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ +#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ +#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK(n) ((n) & 0xff) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPREC_RECOUNT0(n) ((n) & 0xff) +#define KPREC_RECOUNT1(n) (((n) >> 16) & 0xff) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) + +#define KPAS_MUKP(n) (((n) >> 26) & 0x1f) +#define KPAS_RP(n) (((n) >> 4) & 0xf) +#define KPAS_CP(n) ((n) & 0xf) + +#define KPASMKP_MKC_MASK (0xff) + +#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off)) +#define keypad_writel(off, v) __raw_writel((v), keypad->mmio_base + (off)) + +#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS) +#define MAX_KEYPAD_KEYS (MAX_MATRIX_KEY_NUM + MAX_DIRECT_KEY_NUM) + +struct pxa27x_keypad { + const struct pxa27x_keypad_platform_data *pdata; + + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + + int irq; + + unsigned short keycodes[MAX_KEYPAD_KEYS]; + int rotary_rel_code[2]; + + unsigned int row_shift; + + /* state row bits of each column scan */ + uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS]; + uint32_t direct_key_state; + + unsigned int direct_key_mask; +}; + +#ifdef CONFIG_OF +static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad, + struct pxa27x_keypad_platform_data *pdata) +{ + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + u32 rows, cols; + int error; + + error = matrix_keypad_parse_properties(dev, &rows, &cols); + if (error) + return error; + + if (rows > MAX_MATRIX_KEY_ROWS || cols > MAX_MATRIX_KEY_COLS) { + dev_err(dev, "rows or cols exceeds maximum value\n"); + return -EINVAL; + } + + pdata->matrix_key_rows = rows; + pdata->matrix_key_cols = cols; + + error = matrix_keypad_build_keymap(NULL, NULL, + pdata->matrix_key_rows, + pdata->matrix_key_cols, + keypad->keycodes, input_dev); + if (error) + return error; + + return 0; +} + +static int pxa27x_keypad_direct_key_parse_dt(struct pxa27x_keypad *keypad, + struct pxa27x_keypad_platform_data *pdata) +{ + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct device_node *np = dev->of_node; + const __be16 *prop; + unsigned short code; + unsigned int proplen, size; + int i; + int error; + + error = of_property_read_u32(np, "marvell,direct-key-count", + &pdata->direct_key_num); + if (error) { + /* + * If do not have marvel,direct-key-count defined, + * it means direct key is not supported. + */ + return error == -EINVAL ? 0 : error; + } + + error = of_property_read_u32(np, "marvell,direct-key-mask", + &pdata->direct_key_mask); + if (error) { + if (error != -EINVAL) + return error; + + /* + * If marvell,direct-key-mask is not defined, driver will use + * default value. Default value is set when configure the keypad. + */ + pdata->direct_key_mask = 0; + } + + pdata->direct_key_low_active = of_property_read_bool(np, + "marvell,direct-key-low-active"); + + prop = of_get_property(np, "marvell,direct-key-map", &proplen); + if (!prop) + return -EINVAL; + + if (proplen % sizeof(u16)) + return -EINVAL; + + size = proplen / sizeof(u16); + + /* Only MAX_DIRECT_KEY_NUM is accepted.*/ + if (size > MAX_DIRECT_KEY_NUM) + return -EINVAL; + + for (i = 0; i < size; i++) { + code = be16_to_cpup(prop + i); + keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = code; + __set_bit(code, input_dev->keybit); + } + + return 0; +} + +static int pxa27x_keypad_rotary_parse_dt(struct pxa27x_keypad *keypad, + struct pxa27x_keypad_platform_data *pdata) +{ + const __be32 *prop; + int i, relkey_ret; + unsigned int code, proplen; + const char *rotaryname[2] = { + "marvell,rotary0", "marvell,rotary1"}; + const char relkeyname[] = {"marvell,rotary-rel-key"}; + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct device_node *np = dev->of_node; + + relkey_ret = of_property_read_u32(np, relkeyname, &code); + /* if can read correct rotary key-code, we do not need this. */ + if (relkey_ret == 0) { + unsigned short relcode; + + /* rotary0 taks lower half, rotary1 taks upper half. */ + relcode = code & 0xffff; + pdata->rotary0_rel_code = (code & 0xffff); + __set_bit(relcode, input_dev->relbit); + + relcode = code >> 16; + pdata->rotary1_rel_code = relcode; + __set_bit(relcode, input_dev->relbit); + } + + for (i = 0; i < 2; i++) { + prop = of_get_property(np, rotaryname[i], &proplen); + /* + * If the prop is not set, it means keypad does not need + * initialize the rotaryX. + */ + if (!prop) + continue; + + code = be32_to_cpup(prop); + /* + * Not all up/down key code are valid. + * Now we depends on direct-rel-code. + */ + if ((!(code & 0xffff) || !(code >> 16)) && relkey_ret) { + return relkey_ret; + } else { + unsigned int n = MAX_MATRIX_KEY_NUM + (i << 1); + unsigned short keycode; + + keycode = code & 0xffff; + keypad->keycodes[n] = keycode; + __set_bit(keycode, input_dev->keybit); + + keycode = code >> 16; + keypad->keycodes[n + 1] = keycode; + __set_bit(keycode, input_dev->keybit); + + if (i == 0) + pdata->rotary0_rel_code = -1; + else + pdata->rotary1_rel_code = -1; + } + if (i == 0) + pdata->enable_rotary0 = 1; + else + pdata->enable_rotary1 = 1; + } + + keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; + keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; + + return 0; +} + +static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad) +{ + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct device_node *np = dev->of_node; + struct pxa27x_keypad_platform_data *pdata; + int error; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "failed to allocate memory for pdata\n"); + return -ENOMEM; + } + + error = pxa27x_keypad_matrix_key_parse_dt(keypad, pdata); + if (error) { + dev_err(dev, "failed to parse matrix key\n"); + return error; + } + + error = pxa27x_keypad_direct_key_parse_dt(keypad, pdata); + if (error) { + dev_err(dev, "failed to parse direct key\n"); + return error; + } + + error = pxa27x_keypad_rotary_parse_dt(keypad, pdata); + if (error) { + dev_err(dev, "failed to parse rotary key\n"); + return error; + } + + error = of_property_read_u32(np, "marvell,debounce-interval", + &pdata->debounce_interval); + if (error) { + dev_err(dev, "failed to parse debounce-interval\n"); + return error; + } + + /* + * The keycodes may not only includes matrix key but also the direct + * key or rotary key. + */ + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + + keypad->pdata = pdata; + return 0; +} + +#else + +static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad) +{ + dev_info(keypad->input_dev->dev.parent, "missing platform data\n"); + + return -EINVAL; +} + +#endif + +static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) +{ + const struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; + unsigned short keycode; + int i; + int error; + + error = matrix_keypad_build_keymap(pdata->matrix_keymap_data, NULL, + pdata->matrix_key_rows, + pdata->matrix_key_cols, + keypad->keycodes, input_dev); + if (error) + return error; + + /* + * The keycodes may not only include matrix keys but also the direct + * or rotary keys. + */ + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + + /* For direct keys. */ + for (i = 0; i < pdata->direct_key_num; i++) { + keycode = pdata->direct_key_map[i]; + keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = keycode; + __set_bit(keycode, input_dev->keybit); + } + + if (pdata->enable_rotary0) { + if (pdata->rotary0_up_key && pdata->rotary0_down_key) { + keycode = pdata->rotary0_up_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 0] = keycode; + __set_bit(keycode, input_dev->keybit); + + keycode = pdata->rotary0_down_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 1] = keycode; + __set_bit(keycode, input_dev->keybit); + + keypad->rotary_rel_code[0] = -1; + } else { + keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; + __set_bit(pdata->rotary0_rel_code, input_dev->relbit); + } + } + + if (pdata->enable_rotary1) { + if (pdata->rotary1_up_key && pdata->rotary1_down_key) { + keycode = pdata->rotary1_up_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 2] = keycode; + __set_bit(keycode, input_dev->keybit); + + keycode = pdata->rotary1_down_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 3] = keycode; + __set_bit(keycode, input_dev->keybit); + + keypad->rotary_rel_code[1] = -1; + } else { + keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; + __set_bit(pdata->rotary1_rel_code, input_dev->relbit); + } + } + + __clear_bit(KEY_RESERVED, input_dev->keybit); + + return 0; +} + +static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad) +{ + const struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; + int row, col, num_keys_pressed = 0; + uint32_t new_state[MAX_MATRIX_KEY_COLS]; + uint32_t kpas = keypad_readl(KPAS); + + num_keys_pressed = KPAS_MUKP(kpas); + + memset(new_state, 0, sizeof(new_state)); + + if (num_keys_pressed == 0) + goto scan; + + if (num_keys_pressed == 1) { + col = KPAS_CP(kpas); + row = KPAS_RP(kpas); + + /* if invalid row/col, treat as no key pressed */ + if (col >= pdata->matrix_key_cols || + row >= pdata->matrix_key_rows) + goto scan; + + new_state[col] = (1 << row); + goto scan; + } + + if (num_keys_pressed > 1) { + uint32_t kpasmkp0 = keypad_readl(KPASMKP0); + uint32_t kpasmkp1 = keypad_readl(KPASMKP1); + uint32_t kpasmkp2 = keypad_readl(KPASMKP2); + uint32_t kpasmkp3 = keypad_readl(KPASMKP3); + + new_state[0] = kpasmkp0 & KPASMKP_MKC_MASK; + new_state[1] = (kpasmkp0 >> 16) & KPASMKP_MKC_MASK; + new_state[2] = kpasmkp1 & KPASMKP_MKC_MASK; + new_state[3] = (kpasmkp1 >> 16) & KPASMKP_MKC_MASK; + new_state[4] = kpasmkp2 & KPASMKP_MKC_MASK; + new_state[5] = (kpasmkp2 >> 16) & KPASMKP_MKC_MASK; + new_state[6] = kpasmkp3 & KPASMKP_MKC_MASK; + new_state[7] = (kpasmkp3 >> 16) & KPASMKP_MKC_MASK; + } +scan: + for (col = 0; col < pdata->matrix_key_cols; col++) { + uint32_t bits_changed; + int code; + + bits_changed = keypad->matrix_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->matrix_key_rows; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + memcpy(keypad->matrix_key_state, new_state, sizeof(new_state)); +} + +#define DEFAULT_KPREC (0x007f007f) + +static inline int rotary_delta(uint32_t kprec) +{ + if (kprec & KPREC_OF0) + return (kprec & 0xff) + 0x7f; + else if (kprec & KPREC_UF0) + return (kprec & 0xff) - 0x7f - 0xff; + else + return (kprec & 0xff) - 0x7f; +} + +static void report_rotary_event(struct pxa27x_keypad *keypad, int r, int delta) +{ + struct input_dev *dev = keypad->input_dev; + + if (delta == 0) + return; + + if (keypad->rotary_rel_code[r] == -1) { + int code = MAX_MATRIX_KEY_NUM + 2 * r + (delta > 0 ? 0 : 1); + unsigned char keycode = keypad->keycodes[code]; + + /* simulate a press-n-release */ + input_event(dev, EV_MSC, MSC_SCAN, code); + input_report_key(dev, keycode, 1); + input_sync(dev); + input_event(dev, EV_MSC, MSC_SCAN, code); + input_report_key(dev, keycode, 0); + input_sync(dev); + } else { + input_report_rel(dev, keypad->rotary_rel_code[r], delta); + input_sync(dev); + } +} + +static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad) +{ + const struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + uint32_t kprec; + + /* read and reset to default count value */ + kprec = keypad_readl(KPREC); + keypad_writel(KPREC, DEFAULT_KPREC); + + if (pdata->enable_rotary0) + report_rotary_event(keypad, 0, rotary_delta(kprec)); + + if (pdata->enable_rotary1) + report_rotary_event(keypad, 1, rotary_delta(kprec >> 16)); +} + +static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) +{ + const struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; + unsigned int new_state; + uint32_t kpdk, bits_changed; + int i; + + kpdk = keypad_readl(KPDK); + + if (pdata->enable_rotary0 || pdata->enable_rotary1) + pxa27x_keypad_scan_rotary(keypad); + + /* + * The KPDR_DK only output the key pin level, so it relates to board, + * and low level may be active. + */ + if (pdata->direct_key_low_active) + new_state = ~KPDK_DK(kpdk) & keypad->direct_key_mask; + else + new_state = KPDK_DK(kpdk) & keypad->direct_key_mask; + + bits_changed = keypad->direct_key_state ^ new_state; + + if (bits_changed == 0) + return; + + for (i = 0; i < pdata->direct_key_num; i++) { + if (bits_changed & (1 << i)) { + int code = MAX_MATRIX_KEY_NUM + i; + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], + new_state & (1 << i)); + } + } + input_sync(input_dev); + keypad->direct_key_state = new_state; +} + +static void clear_wakeup_event(struct pxa27x_keypad *keypad) +{ + const struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + + if (pdata->clear_wakeup_event) + (pdata->clear_wakeup_event)(); +} + +static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id) +{ + struct pxa27x_keypad *keypad = dev_id; + unsigned long kpc = keypad_readl(KPC); + + clear_wakeup_event(keypad); + + if (kpc & KPC_DI) + pxa27x_keypad_scan_direct(keypad); + + if (kpc & KPC_MI) + pxa27x_keypad_scan_matrix(keypad); + + return IRQ_HANDLED; +} + +static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) +{ + const struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + unsigned int mask = 0, direct_key_num = 0; + unsigned long kpc = 0; + + /* clear pending interrupt bit */ + keypad_readl(KPC); + + /* enable matrix keys with automatic scan */ + if (pdata->matrix_key_rows && pdata->matrix_key_cols) { + kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; + kpc |= KPC_MKRN(pdata->matrix_key_rows) | + KPC_MKCN(pdata->matrix_key_cols); + } + + /* enable rotary key, debounce interval same as direct keys */ + if (pdata->enable_rotary0) { + mask |= 0x03; + direct_key_num = 2; + kpc |= KPC_REE0; + } + + if (pdata->enable_rotary1) { + mask |= 0x0c; + direct_key_num = 4; + kpc |= KPC_REE1; + } + + if (pdata->direct_key_num > direct_key_num) + direct_key_num = pdata->direct_key_num; + + /* + * Direct keys usage may not start from KP_DKIN0, check the platfrom + * mask data to config the specific. + */ + if (pdata->direct_key_mask) + keypad->direct_key_mask = pdata->direct_key_mask; + else + keypad->direct_key_mask = ((1 << direct_key_num) - 1) & ~mask; + + /* enable direct key */ + if (direct_key_num) + kpc |= KPC_DE | KPC_DIE | KPC_DKN(direct_key_num); + + keypad_writel(KPC, kpc | KPC_RE_ZERO_DEB); + keypad_writel(KPREC, DEFAULT_KPREC); + keypad_writel(KPKDI, pdata->debounce_interval); +} + +static int pxa27x_keypad_open(struct input_dev *dev) +{ + struct pxa27x_keypad *keypad = input_get_drvdata(dev); + int ret; + /* Enable unit clock */ + ret = clk_prepare_enable(keypad->clk); + if (ret) + return ret; + + pxa27x_keypad_config(keypad); + + return 0; +} + +static void pxa27x_keypad_close(struct input_dev *dev) +{ + struct pxa27x_keypad *keypad = input_get_drvdata(dev); + + /* Disable clock unit */ + clk_disable_unprepare(keypad->clk); +} + +#ifdef CONFIG_PM_SLEEP +static int pxa27x_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); + + /* + * If the keypad is used a wake up source, clock can not be disabled. + * Or it can not detect the key pressing. + */ + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(keypad->irq); + else + clk_disable_unprepare(keypad->clk); + + return 0; +} + +static int pxa27x_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + int ret = 0; + + /* + * If the keypad is used as wake up source, the clock is not turned + * off. So do not need configure it again. + */ + if (device_may_wakeup(&pdev->dev)) { + disable_irq_wake(keypad->irq); + } else { + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + /* Enable unit clock */ + ret = clk_prepare_enable(keypad->clk); + if (!ret) + pxa27x_keypad_config(keypad); + } + + mutex_unlock(&input_dev->mutex); + } + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(pxa27x_keypad_pm_ops, + pxa27x_keypad_suspend, pxa27x_keypad_resume); + + +static int pxa27x_keypad_probe(struct platform_device *pdev) +{ + const struct pxa27x_keypad_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + struct pxa27x_keypad *keypad; + struct input_dev *input_dev; + struct resource *res; + int irq, error; + + /* Driver need build keycode from device tree or pdata */ + if (!np && !pdata) + return -EINVAL; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + return -ENXIO; + } + + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), + GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) + return -ENOMEM; + + keypad->pdata = pdata; + keypad->input_dev = input_dev; + keypad->irq = irq; + + keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(keypad->mmio_base)) + return PTR_ERR(keypad->mmio_base); + + keypad->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + return PTR_ERR(keypad->clk); + } + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = pxa27x_keypad_open; + input_dev->close = pxa27x_keypad_close; + input_dev->dev.parent = &pdev->dev; + + input_dev->keycode = keypad->keycodes; + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + + input_set_drvdata(input_dev, keypad); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + if (pdata) { + error = pxa27x_keypad_build_keycode(keypad); + } else { + error = pxa27x_keypad_build_keycode_from_dt(keypad); + /* + * Data that we get from DT resides in dynamically + * allocated memory so we need to update our pdata + * pointer. + */ + pdata = keypad->pdata; + } + if (error) { + dev_err(&pdev->dev, "failed to build keycode\n"); + return error; + } + + keypad->row_shift = get_count_order(pdata->matrix_key_cols); + + if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) || + (pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) { + input_dev->evbit[0] |= BIT_MASK(EV_REL); + } + + error = devm_request_irq(&pdev->dev, irq, pxa27x_keypad_irq_handler, + 0, pdev->name, keypad); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return error; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + platform_set_drvdata(pdev, keypad); + device_init_wakeup(&pdev->dev, 1); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id pxa27x_keypad_dt_match[] = { + { .compatible = "marvell,pxa27x-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match); +#endif + +static struct platform_driver pxa27x_keypad_driver = { + .probe = pxa27x_keypad_probe, + .driver = { + .name = "pxa27x-keypad", + .of_match_table = of_match_ptr(pxa27x_keypad_dt_match), + .pm = &pxa27x_keypad_pm_ops, + }, +}; +module_platform_driver(pxa27x_keypad_driver); + +MODULE_DESCRIPTION("PXA27x Keypad Controller Driver"); +MODULE_LICENSE("GPL"); +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:pxa27x-keypad"); diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c new file mode 100644 index 000000000..1cf5211fd --- /dev/null +++ b/drivers/input/keyboard/pxa930_rotary.c @@ -0,0 +1,200 @@ +/* + * Driver for the enhanced rotary controller on pxa930 and pxa935 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <linux/platform_data/keyboard-pxa930_rotary.h> + +#define SBCR (0x04) +#define ERCR (0x0c) + +#define SBCR_ERSB (1 << 5) + +struct pxa930_rotary { + struct input_dev *input_dev; + void __iomem *mmio_base; + int last_ercr; + + struct pxa930_rotary_platform_data *pdata; +}; + +static void clear_sbcr(struct pxa930_rotary *r) +{ + uint32_t sbcr = __raw_readl(r->mmio_base + SBCR); + + __raw_writel(sbcr | SBCR_ERSB, r->mmio_base + SBCR); + __raw_writel(sbcr & ~SBCR_ERSB, r->mmio_base + SBCR); +} + +static irqreturn_t rotary_irq(int irq, void *dev_id) +{ + struct pxa930_rotary *r = dev_id; + struct pxa930_rotary_platform_data *pdata = r->pdata; + int ercr, delta, key; + + ercr = __raw_readl(r->mmio_base + ERCR) & 0xf; + clear_sbcr(r); + + delta = ercr - r->last_ercr; + if (delta == 0) + return IRQ_HANDLED; + + r->last_ercr = ercr; + + if (pdata->up_key && pdata->down_key) { + key = (delta > 0) ? pdata->up_key : pdata->down_key; + input_report_key(r->input_dev, key, 1); + input_sync(r->input_dev); + input_report_key(r->input_dev, key, 0); + } else + input_report_rel(r->input_dev, pdata->rel_code, delta); + + input_sync(r->input_dev); + + return IRQ_HANDLED; +} + +static int pxa930_rotary_open(struct input_dev *dev) +{ + struct pxa930_rotary *r = input_get_drvdata(dev); + + clear_sbcr(r); + + return 0; +} + +static void pxa930_rotary_close(struct input_dev *dev) +{ + struct pxa930_rotary *r = input_get_drvdata(dev); + + clear_sbcr(r); +} + +static int pxa930_rotary_probe(struct platform_device *pdev) +{ + struct pxa930_rotary_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct pxa930_rotary *r; + struct input_dev *input_dev; + struct resource *res; + int irq; + int err; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq for rotary controller\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no I/O memory defined\n"); + return -ENXIO; + } + + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + r = kzalloc(sizeof(struct pxa930_rotary), GFP_KERNEL); + if (!r) + return -ENOMEM; + + r->mmio_base = ioremap_nocache(res->start, resource_size(res)); + if (r->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to remap IO memory\n"); + err = -ENXIO; + goto failed_free; + } + + r->pdata = pdata; + platform_set_drvdata(pdev, r); + + /* allocate and register the input device */ + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + err = -ENOMEM; + goto failed_free_io; + } + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = pxa930_rotary_open; + input_dev->close = pxa930_rotary_close; + input_dev->dev.parent = &pdev->dev; + + if (pdata->up_key && pdata->down_key) { + __set_bit(pdata->up_key, input_dev->keybit); + __set_bit(pdata->down_key, input_dev->keybit); + __set_bit(EV_KEY, input_dev->evbit); + } else { + __set_bit(pdata->rel_code, input_dev->relbit); + __set_bit(EV_REL, input_dev->evbit); + } + + r->input_dev = input_dev; + input_set_drvdata(input_dev, r); + + err = request_irq(irq, rotary_irq, 0, + "enhanced rotary", r); + if (err) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto failed_free_input; + } + + err = input_register_device(input_dev); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + return 0; + +failed_free_irq: + free_irq(irq, r); +failed_free_input: + input_free_device(input_dev); +failed_free_io: + iounmap(r->mmio_base); +failed_free: + kfree(r); + return err; +} + +static int pxa930_rotary_remove(struct platform_device *pdev) +{ + struct pxa930_rotary *r = platform_get_drvdata(pdev); + + free_irq(platform_get_irq(pdev, 0), r); + input_unregister_device(r->input_dev); + iounmap(r->mmio_base); + kfree(r); + + return 0; +} + +static struct platform_driver pxa930_rotary_driver = { + .driver = { + .name = "pxa930-rotary", + }, + .probe = pxa930_rotary_probe, + .remove = pxa930_rotary_remove, +}; +module_platform_driver(pxa930_rotary_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller"); +MODULE_AUTHOR("Yao Yong <yaoyong@marvell.com>"); diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c new file mode 100644 index 000000000..76bb51309 --- /dev/null +++ b/drivers/input/keyboard/qt1070.c @@ -0,0 +1,300 @@ +/* + * Atmel AT42QT1070 QTouch Sensor Controller + * + * Copyright (C) 2011 Atmel + * + * Authors: Bo Shen <voice.shen@atmel.com> + * + * Base on AT42QT2160 driver by: + * Raphael Derosso Pereira <raphaelpereira@gmail.com> + * Copyright (C) 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/delay.h> + +/* Address for each register */ +#define CHIP_ID 0x00 +#define QT1070_CHIP_ID 0x2E + +#define FW_VERSION 0x01 +#define QT1070_FW_VERSION 0x15 + +#define DET_STATUS 0x02 + +#define KEY_STATUS 0x03 + +/* Calibrate */ +#define CALIBRATE_CMD 0x38 +#define QT1070_CAL_TIME 200 + +/* Reset */ +#define RESET 0x39 +#define QT1070_RESET_TIME 255 + +/* AT42QT1070 support up to 7 keys */ +static const unsigned short qt1070_key2code[] = { + KEY_0, KEY_1, KEY_2, KEY_3, + KEY_4, KEY_5, KEY_6, +}; + +struct qt1070_data { + struct i2c_client *client; + struct input_dev *input; + unsigned int irq; + unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)]; + u8 last_keys; +}; + +static int qt1070_read(struct i2c_client *client, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + dev_err(&client->dev, + "can not read register, returned %d\n", ret); + + return ret; +} + +static int qt1070_write(struct i2c_client *client, u8 reg, u8 data) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, reg, data); + if (ret < 0) + dev_err(&client->dev, + "can not write register, returned %d\n", ret); + + return ret; +} + +static bool qt1070_identify(struct i2c_client *client) +{ + int id, ver; + + /* Read Chip ID */ + id = qt1070_read(client, CHIP_ID); + if (id != QT1070_CHIP_ID) { + dev_err(&client->dev, "ID %d not supported\n", id); + return false; + } + + /* Read firmware version */ + ver = qt1070_read(client, FW_VERSION); + if (ver < 0) { + dev_err(&client->dev, "could not read the firmware version\n"); + return false; + } + + dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver); + + return true; +} + +static irqreturn_t qt1070_interrupt(int irq, void *dev_id) +{ + struct qt1070_data *data = dev_id; + struct i2c_client *client = data->client; + struct input_dev *input = data->input; + int i; + u8 new_keys, keyval, mask = 0x01; + + /* Read the detected status register, thus clearing interrupt */ + qt1070_read(client, DET_STATUS); + + /* Read which key changed */ + new_keys = qt1070_read(client, KEY_STATUS); + + for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { + keyval = new_keys & mask; + if ((data->last_keys & mask) != keyval) + input_report_key(input, data->keycodes[i], keyval); + mask <<= 1; + } + input_sync(input); + + data->last_keys = new_keys; + return IRQ_HANDLED; +} + +static int qt1070_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct qt1070_data *data; + struct input_dev *input; + int i; + int err; + + err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE); + if (!err) { + dev_err(&client->dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + if (!client->irq) { + dev_err(&client->dev, "please assign the irq to this device\n"); + return -EINVAL; + } + + /* Identify the qt1070 chip */ + if (!qt1070_identify(client)) + return -ENODEV; + + data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL); + input = input_allocate_device(); + if (!data || !input) { + dev_err(&client->dev, "insufficient memory\n"); + err = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input = input; + data->irq = client->irq; + + input->name = "AT42QT1070 QTouch Sensor"; + input->dev.parent = &client->dev; + input->id.bustype = BUS_I2C; + + /* Add the keycode */ + input->keycode = data->keycodes; + input->keycodesize = sizeof(data->keycodes[0]); + input->keycodemax = ARRAY_SIZE(qt1070_key2code); + + __set_bit(EV_KEY, input->evbit); + + for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { + data->keycodes[i] = qt1070_key2code[i]; + __set_bit(qt1070_key2code[i], input->keybit); + } + + /* Calibrate device */ + qt1070_write(client, CALIBRATE_CMD, 1); + msleep(QT1070_CAL_TIME); + + /* Soft reset */ + qt1070_write(client, RESET, 1); + msleep(QT1070_RESET_TIME); + + err = request_threaded_irq(client->irq, NULL, qt1070_interrupt, + IRQF_TRIGGER_NONE | IRQF_ONESHOT, + client->dev.driver->name, data); + if (err) { + dev_err(&client->dev, "fail to request irq\n"); + goto err_free_mem; + } + + /* Register the input device */ + err = input_register_device(data->input); + if (err) { + dev_err(&client->dev, "Failed to register input device\n"); + goto err_free_irq; + } + + i2c_set_clientdata(client, data); + + /* Read to clear the chang line */ + qt1070_read(client, DET_STATUS); + + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input); + kfree(data); + return err; +} + +static int qt1070_remove(struct i2c_client *client) +{ + struct qt1070_data *data = i2c_get_clientdata(client); + + /* Release IRQ */ + free_irq(client->irq, data); + + input_unregister_device(data->input); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int qt1070_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct qt1070_data *data = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) + enable_irq_wake(data->irq); + + return 0; +} + +static int qt1070_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct qt1070_data *data = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) + disable_irq_wake(data->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume); + +static const struct i2c_device_id qt1070_id[] = { + { "qt1070", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, qt1070_id); + +#ifdef CONFIG_OF +static const struct of_device_id qt1070_of_match[] = { + { .compatible = "qt1070", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qt1070_of_match); +#endif + +static struct i2c_driver qt1070_driver = { + .driver = { + .name = "qt1070", + .of_match_table = of_match_ptr(qt1070_of_match), + .pm = &qt1070_pm_ops, + }, + .id_table = qt1070_id, + .probe = qt1070_probe, + .remove = qt1070_remove, +}; + +module_i2c_driver(qt1070_driver); + +MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); +MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c new file mode 100644 index 000000000..43b86482d --- /dev/null +++ b/drivers/input/keyboard/qt2160.c @@ -0,0 +1,511 @@ +/* + * qt2160.c - Atmel AT42QT2160 Touch Sense Controller + * + * Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/input.h> + +#define QT2160_VALID_CHIPID 0x11 + +#define QT2160_CMD_CHIPID 0 +#define QT2160_CMD_CODEVER 1 +#define QT2160_CMD_GSTAT 2 +#define QT2160_CMD_KEYS3 3 +#define QT2160_CMD_KEYS4 4 +#define QT2160_CMD_SLIDE 5 +#define QT2160_CMD_GPIOS 6 +#define QT2160_CMD_SUBVER 7 +#define QT2160_CMD_CALIBRATE 10 +#define QT2160_CMD_DRIVE_X 70 +#define QT2160_CMD_PWMEN_X 74 +#define QT2160_CMD_PWM_DUTY 76 + +#define QT2160_NUM_LEDS_X 8 + +#define QT2160_CYCLE_INTERVAL (2*HZ) + +static unsigned char qt2160_key2code[] = { + KEY_0, KEY_1, KEY_2, KEY_3, + KEY_4, KEY_5, KEY_6, KEY_7, + KEY_8, KEY_9, KEY_A, KEY_B, + KEY_C, KEY_D, KEY_E, KEY_F, +}; + +#ifdef CONFIG_LEDS_CLASS +struct qt2160_led { + struct qt2160_data *qt2160; + struct led_classdev cdev; + struct work_struct work; + char name[32]; + int id; + enum led_brightness new_brightness; +}; +#endif + +struct qt2160_data { + struct i2c_client *client; + struct input_dev *input; + struct delayed_work dwork; + spinlock_t lock; /* Protects canceling/rescheduling of dwork */ + unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)]; + u16 key_matrix; +#ifdef CONFIG_LEDS_CLASS + struct qt2160_led leds[QT2160_NUM_LEDS_X]; + struct mutex led_lock; +#endif +}; + +static int qt2160_read(struct i2c_client *client, u8 reg); +static int qt2160_write(struct i2c_client *client, u8 reg, u8 data); + +#ifdef CONFIG_LEDS_CLASS + +static void qt2160_led_work(struct work_struct *work) +{ + struct qt2160_led *led = container_of(work, struct qt2160_led, work); + struct qt2160_data *qt2160 = led->qt2160; + struct i2c_client *client = qt2160->client; + int value = led->new_brightness; + u32 drive, pwmen; + + mutex_lock(&qt2160->led_lock); + + drive = qt2160_read(client, QT2160_CMD_DRIVE_X); + pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X); + if (value != LED_OFF) { + drive |= (1 << led->id); + pwmen |= (1 << led->id); + + } else { + drive &= ~(1 << led->id); + pwmen &= ~(1 << led->id); + } + qt2160_write(client, QT2160_CMD_DRIVE_X, drive); + qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen); + + /* + * Changing this register will change the brightness + * of every LED in the qt2160. It's a HW limitation. + */ + if (value != LED_OFF) + qt2160_write(client, QT2160_CMD_PWM_DUTY, value); + + mutex_unlock(&qt2160->led_lock); +} + +static void qt2160_led_set(struct led_classdev *cdev, + enum led_brightness value) +{ + struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev); + + led->new_brightness = value; + schedule_work(&led->work); +} + +#endif /* CONFIG_LEDS_CLASS */ + +static int qt2160_read_block(struct i2c_client *client, + u8 inireg, u8 *buffer, unsigned int count) +{ + int error, idx = 0; + + /* + * Can't use SMBus block data read. Check for I2C functionality to speed + * things up whenever possible. Otherwise we will be forced to read + * sequentially. + */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + + error = i2c_smbus_write_byte(client, inireg + idx); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + error = i2c_master_recv(client, buffer, count); + if (error != count) { + dev_err(&client->dev, + "couldn't read registers. Returned %d bytes\n", error); + return error; + } + } else { + + while (count--) { + int data; + + error = i2c_smbus_write_byte(client, inireg + idx); + if (error) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", error); + return error; + } + + data = i2c_smbus_read_byte(client); + if (data < 0) { + dev_err(&client->dev, + "couldn't read register. Returned %d\n", data); + return data; + } + + buffer[idx++] = data; + } + } + + return 0; +} + +static int qt2160_get_key_matrix(struct qt2160_data *qt2160) +{ + struct i2c_client *client = qt2160->client; + struct input_dev *input = qt2160->input; + u8 regs[6]; + u16 old_matrix, new_matrix; + int ret, i, mask; + + dev_dbg(&client->dev, "requesting keys...\n"); + + /* + * Read all registers from General Status Register + * to GPIOs register + */ + ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6); + if (ret) { + dev_err(&client->dev, + "could not perform chip read.\n"); + return ret; + } + + old_matrix = qt2160->key_matrix; + qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1]; + + mask = 0x01; + for (i = 0; i < 16; ++i, mask <<= 1) { + int keyval = new_matrix & mask; + + if ((old_matrix & mask) != keyval) { + input_report_key(input, qt2160->keycodes[i], keyval); + dev_dbg(&client->dev, "key %d %s\n", + i, keyval ? "pressed" : "released"); + } + } + + input_sync(input); + + return 0; +} + +static irqreturn_t qt2160_irq(int irq, void *_qt2160) +{ + struct qt2160_data *qt2160 = _qt2160; + unsigned long flags; + + spin_lock_irqsave(&qt2160->lock, flags); + + mod_delayed_work(system_wq, &qt2160->dwork, 0); + + spin_unlock_irqrestore(&qt2160->lock, flags); + + return IRQ_HANDLED; +} + +static void qt2160_schedule_read(struct qt2160_data *qt2160) +{ + spin_lock_irq(&qt2160->lock); + schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL); + spin_unlock_irq(&qt2160->lock); +} + +static void qt2160_worker(struct work_struct *work) +{ + struct qt2160_data *qt2160 = + container_of(work, struct qt2160_data, dwork.work); + + dev_dbg(&qt2160->client->dev, "worker\n"); + + qt2160_get_key_matrix(qt2160); + + /* Avoid device lock up by checking every so often */ + qt2160_schedule_read(qt2160); +} + +static int qt2160_read(struct i2c_client *client, u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte(client, reg); + if (ret) { + dev_err(&client->dev, + "couldn't send request. Returned %d\n", ret); + return ret; + } + + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, + "couldn't read register. Returned %d\n", ret); + return ret; + } + + return ret; +} + +static int qt2160_write(struct i2c_client *client, u8 reg, u8 data) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, reg, data); + if (ret < 0) + dev_err(&client->dev, + "couldn't write data. Returned %d\n", ret); + + return ret; +} + +#ifdef CONFIG_LEDS_CLASS + +static int qt2160_register_leds(struct qt2160_data *qt2160) +{ + struct i2c_client *client = qt2160->client; + int ret; + int i; + + mutex_init(&qt2160->led_lock); + + for (i = 0; i < QT2160_NUM_LEDS_X; i++) { + struct qt2160_led *led = &qt2160->leds[i]; + + snprintf(led->name, sizeof(led->name), "qt2160:x%d", i); + led->cdev.name = led->name; + led->cdev.brightness_set = qt2160_led_set; + led->cdev.brightness = LED_OFF; + led->id = i; + led->qt2160 = qt2160; + + INIT_WORK(&led->work, qt2160_led_work); + + ret = led_classdev_register(&client->dev, &led->cdev); + if (ret < 0) + return ret; + } + + /* Tur off LEDs */ + qt2160_write(client, QT2160_CMD_DRIVE_X, 0); + qt2160_write(client, QT2160_CMD_PWMEN_X, 0); + qt2160_write(client, QT2160_CMD_PWM_DUTY, 0); + + return 0; +} + +static void qt2160_unregister_leds(struct qt2160_data *qt2160) +{ + int i; + + for (i = 0; i < QT2160_NUM_LEDS_X; i++) { + led_classdev_unregister(&qt2160->leds[i].cdev); + cancel_work_sync(&qt2160->leds[i].work); + } +} + +#else + +static inline int qt2160_register_leds(struct qt2160_data *qt2160) +{ + return 0; +} + +static inline void qt2160_unregister_leds(struct qt2160_data *qt2160) +{ +} + +#endif + +static bool qt2160_identify(struct i2c_client *client) +{ + int id, ver, rev; + + /* Read Chid ID to check if chip is valid */ + id = qt2160_read(client, QT2160_CMD_CHIPID); + if (id != QT2160_VALID_CHIPID) { + dev_err(&client->dev, "ID %d not supported\n", id); + return false; + } + + /* Read chip firmware version */ + ver = qt2160_read(client, QT2160_CMD_CODEVER); + if (ver < 0) { + dev_err(&client->dev, "could not get firmware version\n"); + return false; + } + + /* Read chip firmware revision */ + rev = qt2160_read(client, QT2160_CMD_SUBVER); + if (rev < 0) { + dev_err(&client->dev, "could not get firmware revision\n"); + return false; + } + + dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n", + ver >> 4, ver & 0xf, rev); + + return true; +} + +static int qt2160_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct qt2160_data *qt2160; + struct input_dev *input; + int i; + int error; + + /* Check functionality */ + error = i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE); + if (!error) { + dev_err(&client->dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + if (!qt2160_identify(client)) + return -ENODEV; + + /* Chip is valid and active. Allocate structure */ + qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL); + input = input_allocate_device(); + if (!qt2160 || !input) { + dev_err(&client->dev, "insufficient memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + qt2160->client = client; + qt2160->input = input; + INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker); + spin_lock_init(&qt2160->lock); + + input->name = "AT42QT2160 Touch Sense Keyboard"; + input->id.bustype = BUS_I2C; + + input->keycode = qt2160->keycodes; + input->keycodesize = sizeof(qt2160->keycodes[0]); + input->keycodemax = ARRAY_SIZE(qt2160_key2code); + + __set_bit(EV_KEY, input->evbit); + __clear_bit(EV_REP, input->evbit); + for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) { + qt2160->keycodes[i] = qt2160_key2code[i]; + __set_bit(qt2160_key2code[i], input->keybit); + } + __clear_bit(KEY_RESERVED, input->keybit); + + /* Calibrate device */ + error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1); + if (error) { + dev_err(&client->dev, "failed to calibrate device\n"); + goto err_free_mem; + } + + if (client->irq) { + error = request_irq(client->irq, qt2160_irq, + IRQF_TRIGGER_FALLING, "qt2160", qt2160); + if (error) { + dev_err(&client->dev, + "failed to allocate irq %d\n", client->irq); + goto err_free_mem; + } + } + + error = qt2160_register_leds(qt2160); + if (error) { + dev_err(&client->dev, "Failed to register leds\n"); + goto err_free_irq; + } + + error = input_register_device(qt2160->input); + if (error) { + dev_err(&client->dev, + "Failed to register input device\n"); + goto err_unregister_leds; + } + + i2c_set_clientdata(client, qt2160); + qt2160_schedule_read(qt2160); + + return 0; + +err_unregister_leds: + qt2160_unregister_leds(qt2160); +err_free_irq: + if (client->irq) + free_irq(client->irq, qt2160); +err_free_mem: + input_free_device(input); + kfree(qt2160); + return error; +} + +static int qt2160_remove(struct i2c_client *client) +{ + struct qt2160_data *qt2160 = i2c_get_clientdata(client); + + qt2160_unregister_leds(qt2160); + + /* Release IRQ so no queue will be scheduled */ + if (client->irq) + free_irq(client->irq, qt2160); + + cancel_delayed_work_sync(&qt2160->dwork); + + input_unregister_device(qt2160->input); + kfree(qt2160); + + return 0; +} + +static const struct i2c_device_id qt2160_idtable[] = { + { "qt2160", 0, }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, qt2160_idtable); + +static struct i2c_driver qt2160_driver = { + .driver = { + .name = "qt2160", + }, + + .id_table = qt2160_idtable, + .probe = qt2160_probe, + .remove = qt2160_remove, +}; + +module_i2c_driver(qt2160_driver); + +MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>"); +MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c new file mode 100644 index 000000000..1fe1aa2ad --- /dev/null +++ b/drivers/input/keyboard/samsung-keypad.c @@ -0,0 +1,615 @@ +/* + * Samsung keypad driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/sched.h> +#include <linux/input/samsung-keypad.h> + +#define SAMSUNG_KEYIFCON 0x00 +#define SAMSUNG_KEYIFSTSCLR 0x04 +#define SAMSUNG_KEYIFCOL 0x08 +#define SAMSUNG_KEYIFROW 0x0c +#define SAMSUNG_KEYIFFC 0x10 + +/* SAMSUNG_KEYIFCON */ +#define SAMSUNG_KEYIFCON_INT_F_EN (1 << 0) +#define SAMSUNG_KEYIFCON_INT_R_EN (1 << 1) +#define SAMSUNG_KEYIFCON_DF_EN (1 << 2) +#define SAMSUNG_KEYIFCON_FC_EN (1 << 3) +#define SAMSUNG_KEYIFCON_WAKEUPEN (1 << 4) + +/* SAMSUNG_KEYIFSTSCLR */ +#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK (0xff << 0) +#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK (0xff << 8) +#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET 8 +#define S5PV210_KEYIFSTSCLR_P_INT_MASK (0x3fff << 0) +#define S5PV210_KEYIFSTSCLR_R_INT_MASK (0x3fff << 16) +#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET 16 + +/* SAMSUNG_KEYIFCOL */ +#define SAMSUNG_KEYIFCOL_MASK (0xff << 0) +#define S5PV210_KEYIFCOLEN_MASK (0xff << 8) + +/* SAMSUNG_KEYIFROW */ +#define SAMSUNG_KEYIFROW_MASK (0xff << 0) +#define S5PV210_KEYIFROW_MASK (0x3fff << 0) + +/* SAMSUNG_KEYIFFC */ +#define SAMSUNG_KEYIFFC_MASK (0x3ff << 0) + +enum samsung_keypad_type { + KEYPAD_TYPE_SAMSUNG, + KEYPAD_TYPE_S5PV210, +}; + +struct samsung_keypad { + struct input_dev *input_dev; + struct platform_device *pdev; + struct clk *clk; + void __iomem *base; + wait_queue_head_t wait; + bool stopped; + bool wake_enabled; + int irq; + enum samsung_keypad_type type; + unsigned int row_shift; + unsigned int rows; + unsigned int cols; + unsigned int row_state[SAMSUNG_MAX_COLS]; + unsigned short keycodes[]; +}; + +static void samsung_keypad_scan(struct samsung_keypad *keypad, + unsigned int *row_state) +{ + unsigned int col; + unsigned int val; + + for (col = 0; col < keypad->cols; col++) { + if (keypad->type == KEYPAD_TYPE_S5PV210) { + val = S5PV210_KEYIFCOLEN_MASK; + val &= ~(1 << col) << 8; + } else { + val = SAMSUNG_KEYIFCOL_MASK; + val &= ~(1 << col); + } + + writel(val, keypad->base + SAMSUNG_KEYIFCOL); + mdelay(1); + + val = readl(keypad->base + SAMSUNG_KEYIFROW); + row_state[col] = ~val & ((1 << keypad->rows) - 1); + } + + /* KEYIFCOL reg clear */ + writel(0, keypad->base + SAMSUNG_KEYIFCOL); +} + +static bool samsung_keypad_report(struct samsung_keypad *keypad, + unsigned int *row_state) +{ + struct input_dev *input_dev = keypad->input_dev; + unsigned int changed; + unsigned int pressed; + unsigned int key_down = 0; + unsigned int val; + unsigned int col, row; + + for (col = 0; col < keypad->cols; col++) { + changed = row_state[col] ^ keypad->row_state[col]; + key_down |= row_state[col]; + if (!changed) + continue; + + for (row = 0; row < keypad->rows; row++) { + if (!(changed & (1 << row))) + continue; + + pressed = row_state[col] & (1 << row); + + dev_dbg(&keypad->input_dev->dev, + "key %s, row: %d, col: %d\n", + pressed ? "pressed" : "released", row, col); + + val = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + + input_event(input_dev, EV_MSC, MSC_SCAN, val); + input_report_key(input_dev, + keypad->keycodes[val], pressed); + } + input_sync(keypad->input_dev); + } + + memcpy(keypad->row_state, row_state, sizeof(keypad->row_state)); + + return key_down; +} + +static irqreturn_t samsung_keypad_irq(int irq, void *dev_id) +{ + struct samsung_keypad *keypad = dev_id; + unsigned int row_state[SAMSUNG_MAX_COLS]; + unsigned int val; + bool key_down; + + pm_runtime_get_sync(&keypad->pdev->dev); + + do { + val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR); + /* Clear interrupt. */ + writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR); + + samsung_keypad_scan(keypad, row_state); + + key_down = samsung_keypad_report(keypad, row_state); + if (key_down) + wait_event_timeout(keypad->wait, keypad->stopped, + msecs_to_jiffies(50)); + + } while (key_down && !keypad->stopped); + + pm_runtime_put(&keypad->pdev->dev); + + return IRQ_HANDLED; +} + +static void samsung_keypad_start(struct samsung_keypad *keypad) +{ + unsigned int val; + + pm_runtime_get_sync(&keypad->pdev->dev); + + /* Tell IRQ thread that it may poll the device. */ + keypad->stopped = false; + + clk_enable(keypad->clk); + + /* Enable interrupt bits. */ + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + /* KEYIFCOL reg clear. */ + writel(0, keypad->base + SAMSUNG_KEYIFCOL); + + pm_runtime_put(&keypad->pdev->dev); +} + +static void samsung_keypad_stop(struct samsung_keypad *keypad) +{ + unsigned int val; + + pm_runtime_get_sync(&keypad->pdev->dev); + + /* Signal IRQ thread to stop polling and disable the handler. */ + keypad->stopped = true; + wake_up(&keypad->wait); + disable_irq(keypad->irq); + + /* Clear interrupt. */ + writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR); + + /* Disable interrupt bits. */ + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN); + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); + + /* + * Now that chip should not generate interrupts we can safely + * re-enable the handler. + */ + enable_irq(keypad->irq); + + pm_runtime_put(&keypad->pdev->dev); +} + +static int samsung_keypad_open(struct input_dev *input_dev) +{ + struct samsung_keypad *keypad = input_get_drvdata(input_dev); + + samsung_keypad_start(keypad); + + return 0; +} + +static void samsung_keypad_close(struct input_dev *input_dev) +{ + struct samsung_keypad *keypad = input_get_drvdata(input_dev); + + samsung_keypad_stop(keypad); +} + +#ifdef CONFIG_OF +static struct samsung_keypad_platdata * +samsung_keypad_parse_dt(struct device *dev) +{ + struct samsung_keypad_platdata *pdata; + struct matrix_keymap_data *keymap_data; + uint32_t *keymap, num_rows = 0, num_cols = 0; + struct device_node *np = dev->of_node, *key_np; + unsigned int key_count; + + if (!np) { + dev_err(dev, "missing device tree data\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for platform data\n"); + return ERR_PTR(-ENOMEM); + } + + of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows); + of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols); + if (!num_rows || !num_cols) { + dev_err(dev, "number of keypad rows/columns not specified\n"); + return ERR_PTR(-EINVAL); + } + pdata->rows = num_rows; + pdata->cols = num_cols; + + keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL); + if (!keymap_data) { + dev_err(dev, "could not allocate memory for keymap data\n"); + return ERR_PTR(-ENOMEM); + } + pdata->keymap_data = keymap_data; + + key_count = of_get_child_count(np); + keymap_data->keymap_size = key_count; + keymap = devm_kcalloc(dev, key_count, sizeof(uint32_t), GFP_KERNEL); + if (!keymap) { + dev_err(dev, "could not allocate memory for keymap\n"); + return ERR_PTR(-ENOMEM); + } + keymap_data->keymap = keymap; + + for_each_child_of_node(np, key_np) { + u32 row, col, key_code; + of_property_read_u32(key_np, "keypad,row", &row); + of_property_read_u32(key_np, "keypad,column", &col); + of_property_read_u32(key_np, "linux,code", &key_code); + *keymap++ = KEY(row, col, key_code); + } + + if (of_get_property(np, "linux,input-no-autorepeat", NULL)) + pdata->no_autorepeat = true; + + pdata->wakeup = of_property_read_bool(np, "wakeup-source") || + /* legacy name */ + of_property_read_bool(np, "linux,input-wakeup"); + + + return pdata; +} +#else +static struct samsung_keypad_platdata * +samsung_keypad_parse_dt(struct device *dev) +{ + dev_err(dev, "no platform data defined\n"); + + return ERR_PTR(-EINVAL); +} +#endif + +static int samsung_keypad_probe(struct platform_device *pdev) +{ + const struct samsung_keypad_platdata *pdata; + const struct matrix_keymap_data *keymap_data; + struct samsung_keypad *keypad; + struct resource *res; + struct input_dev *input_dev; + unsigned int row_shift; + unsigned int keymap_size; + int error; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + pdata = samsung_keypad_parse_dt(&pdev->dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS) + return -EINVAL; + + if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS) + return -EINVAL; + + /* initialize the gpio */ + if (pdata->cfg_gpio) + pdata->cfg_gpio(pdata->rows, pdata->cols); + + row_shift = get_count_order(pdata->cols); + keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]); + + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad) + keymap_size, + GFP_KERNEL); + input_dev = devm_input_allocate_device(&pdev->dev); + if (!keypad || !input_dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + keypad->base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!keypad->base) + return -EBUSY; + + keypad->clk = devm_clk_get(&pdev->dev, "keypad"); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clk\n"); + return PTR_ERR(keypad->clk); + } + + error = clk_prepare(keypad->clk); + if (error) { + dev_err(&pdev->dev, "keypad clock prepare failed\n"); + return error; + } + + keypad->input_dev = input_dev; + keypad->pdev = pdev; + keypad->row_shift = row_shift; + keypad->rows = pdata->rows; + keypad->cols = pdata->cols; + keypad->stopped = true; + init_waitqueue_head(&keypad->wait); + + if (pdev->dev.of_node) + keypad->type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s5pv210-keypad"); + else + keypad->type = platform_get_device_id(pdev)->driver_data; + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + + input_dev->open = samsung_keypad_open; + input_dev->close = samsung_keypad_close; + + error = matrix_keypad_build_keymap(keymap_data, NULL, + pdata->rows, pdata->cols, + keypad->keycodes, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err_unprepare_clk; + } + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + if (!pdata->no_autorepeat) + __set_bit(EV_REP, input_dev->evbit); + + input_set_drvdata(input_dev, keypad); + + keypad->irq = platform_get_irq(pdev, 0); + if (keypad->irq < 0) { + error = keypad->irq; + goto err_unprepare_clk; + } + + error = devm_request_threaded_irq(&pdev->dev, keypad->irq, NULL, + samsung_keypad_irq, IRQF_ONESHOT, + dev_name(&pdev->dev), keypad); + if (error) { + dev_err(&pdev->dev, "failed to register keypad interrupt\n"); + goto err_unprepare_clk; + } + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + pm_runtime_enable(&pdev->dev); + + error = input_register_device(keypad->input_dev); + if (error) + goto err_disable_runtime_pm; + + if (pdev->dev.of_node) { + devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap); + devm_kfree(&pdev->dev, (void *)pdata->keymap_data); + devm_kfree(&pdev->dev, (void *)pdata); + } + return 0; + +err_disable_runtime_pm: + pm_runtime_disable(&pdev->dev); +err_unprepare_clk: + clk_unprepare(keypad->clk); + return error; +} + +static int samsung_keypad_remove(struct platform_device *pdev) +{ + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + + input_unregister_device(keypad->input_dev); + + clk_unprepare(keypad->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int samsung_keypad_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + unsigned int val; + int error; + + if (keypad->stopped) + return 0; + + /* This may fail on some SoCs due to lack of controller support */ + error = enable_irq_wake(keypad->irq); + if (!error) + keypad->wake_enabled = true; + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val |= SAMSUNG_KEYIFCON_WAKEUPEN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); + + return 0; +} + +static int samsung_keypad_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + unsigned int val; + + if (keypad->stopped) + return 0; + + clk_enable(keypad->clk); + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val &= ~SAMSUNG_KEYIFCON_WAKEUPEN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + if (keypad->wake_enabled) + disable_irq_wake(keypad->irq); + + return 0; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad, + bool enable) +{ + unsigned int val; + + clk_enable(keypad->clk); + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + if (enable) { + val |= SAMSUNG_KEYIFCON_WAKEUPEN; + if (device_may_wakeup(&keypad->pdev->dev)) + enable_irq_wake(keypad->irq); + } else { + val &= ~SAMSUNG_KEYIFCON_WAKEUPEN; + if (device_may_wakeup(&keypad->pdev->dev)) + disable_irq_wake(keypad->irq); + } + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); +} + +static int samsung_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + samsung_keypad_stop(keypad); + + samsung_keypad_toggle_wakeup(keypad, true); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int samsung_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + samsung_keypad_toggle_wakeup(keypad, false); + + if (input_dev->users) + samsung_keypad_start(keypad); + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#endif + +static const struct dev_pm_ops samsung_keypad_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(samsung_keypad_suspend, samsung_keypad_resume) + SET_RUNTIME_PM_OPS(samsung_keypad_runtime_suspend, + samsung_keypad_runtime_resume, NULL) +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_keypad_dt_match[] = { + { .compatible = "samsung,s3c6410-keypad" }, + { .compatible = "samsung,s5pv210-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match); +#endif + +static const struct platform_device_id samsung_keypad_driver_ids[] = { + { + .name = "samsung-keypad", + .driver_data = KEYPAD_TYPE_SAMSUNG, + }, { + .name = "s5pv210-keypad", + .driver_data = KEYPAD_TYPE_S5PV210, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids); + +static struct platform_driver samsung_keypad_driver = { + .probe = samsung_keypad_probe, + .remove = samsung_keypad_remove, + .driver = { + .name = "samsung-keypad", + .of_match_table = of_match_ptr(samsung_keypad_dt_match), + .pm = &samsung_keypad_pm_ops, + }, + .id_table = samsung_keypad_driver_ids, +}; +module_platform_driver(samsung_keypad_driver); + +MODULE_DESCRIPTION("Samsung keypad driver"); +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c new file mode 100644 index 000000000..7abf03b4c --- /dev/null +++ b/drivers/input/keyboard/sh_keysc.c @@ -0,0 +1,341 @@ +/* + * SuperH KEYSC Keypad Driver + * + * Copyright (C) 2008 Magnus Damm + * + * Based on gpio_keys.c, Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/input/sh_keysc.h> +#include <linux/bitmap.h> +#include <linux/pm_runtime.h> +#include <linux/io.h> +#include <linux/slab.h> + +static const struct { + unsigned char kymd, keyout, keyin; +} sh_keysc_mode[] = { + [SH_KEYSC_MODE_1] = { 0, 6, 5 }, + [SH_KEYSC_MODE_2] = { 1, 5, 6 }, + [SH_KEYSC_MODE_3] = { 2, 4, 7 }, + [SH_KEYSC_MODE_4] = { 3, 6, 6 }, + [SH_KEYSC_MODE_5] = { 4, 6, 7 }, + [SH_KEYSC_MODE_6] = { 5, 8, 8 }, +}; + +struct sh_keysc_priv { + void __iomem *iomem_base; + DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS); + struct input_dev *input; + struct sh_keysc_info pdata; +}; + +#define KYCR1 0 +#define KYCR2 1 +#define KYINDR 2 +#define KYOUTDR 3 + +#define KYCR2_IRQ_LEVEL 0x10 +#define KYCR2_IRQ_DISABLED 0x00 + +static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr) +{ + return ioread16(p->iomem_base + (reg_nr << 2)); +} + +static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr, + unsigned long value) +{ + iowrite16(value, p->iomem_base + (reg_nr << 2)); +} + +static void sh_keysc_level_mode(struct sh_keysc_priv *p, + unsigned long keys_set) +{ + struct sh_keysc_info *pdata = &p->pdata; + + sh_keysc_write(p, KYOUTDR, 0); + sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8)); + + if (pdata->kycr2_delay) + udelay(pdata->kycr2_delay); +} + +static void sh_keysc_map_dbg(struct device *dev, unsigned long *map, + const char *str) +{ + int k; + + for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++) + dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]); +} + +static irqreturn_t sh_keysc_isr(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct sh_keysc_priv *priv = platform_get_drvdata(pdev); + struct sh_keysc_info *pdata = &priv->pdata; + int keyout_nr = sh_keysc_mode[pdata->mode].keyout; + int keyin_nr = sh_keysc_mode[pdata->mode].keyin; + DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS); + DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS); + DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS); + unsigned char keyin_set, tmp; + int i, k, n; + + dev_dbg(&pdev->dev, "isr!\n"); + + bitmap_fill(keys1, SH_KEYSC_MAXKEYS); + bitmap_zero(keys0, SH_KEYSC_MAXKEYS); + + do { + bitmap_zero(keys, SH_KEYSC_MAXKEYS); + keyin_set = 0; + + sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED); + + for (i = 0; i < keyout_nr; i++) { + n = keyin_nr * i; + + /* drive one KEYOUT pin low, read KEYIN pins */ + sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2))); + udelay(pdata->delay); + tmp = sh_keysc_read(priv, KYINDR); + + /* set bit if key press has been detected */ + for (k = 0; k < keyin_nr; k++) { + if (tmp & (1 << k)) + __set_bit(n + k, keys); + } + + /* keep track of which KEYIN bits that have been set */ + keyin_set |= tmp ^ ((1 << keyin_nr) - 1); + } + + sh_keysc_level_mode(priv, keyin_set); + + bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS); + bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS); + bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS); + + sh_keysc_map_dbg(&pdev->dev, keys, "keys"); + + } while (sh_keysc_read(priv, KYCR2) & 0x01); + + sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys"); + sh_keysc_map_dbg(&pdev->dev, keys0, "keys0"); + sh_keysc_map_dbg(&pdev->dev, keys1, "keys1"); + + for (i = 0; i < SH_KEYSC_MAXKEYS; i++) { + k = pdata->keycodes[i]; + if (!k) + continue; + + if (test_bit(i, keys0) == test_bit(i, priv->last_keys)) + continue; + + if (test_bit(i, keys1) || test_bit(i, keys0)) { + input_event(priv->input, EV_KEY, k, 1); + __set_bit(i, priv->last_keys); + } + + if (!test_bit(i, keys1)) { + input_event(priv->input, EV_KEY, k, 0); + __clear_bit(i, priv->last_keys); + } + + } + input_sync(priv->input); + + return IRQ_HANDLED; +} + +static int sh_keysc_probe(struct platform_device *pdev) +{ + struct sh_keysc_priv *priv; + struct sh_keysc_info *pdata; + struct resource *res; + struct input_dev *input; + int i; + int irq, error; + + if (!dev_get_platdata(&pdev->dev)) { + dev_err(&pdev->dev, "no platform data defined\n"); + error = -EINVAL; + goto err0; + } + + error = -ENXIO; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + goto err0; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get irq\n"); + goto err0; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (priv == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + error = -ENOMEM; + goto err0; + } + + platform_set_drvdata(pdev, priv); + memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata)); + pdata = &priv->pdata; + + priv->iomem_base = ioremap_nocache(res->start, resource_size(res)); + if (priv->iomem_base == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto err1; + } + + priv->input = input_allocate_device(); + if (!priv->input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + error = -ENOMEM; + goto err2; + } + + input = priv->input; + input->evbit[0] = BIT_MASK(EV_KEY); + + input->name = pdev->name; + input->phys = "sh-keysc-keys/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + input->keycode = pdata->keycodes; + input->keycodesize = sizeof(pdata->keycodes[0]); + input->keycodemax = ARRAY_SIZE(pdata->keycodes); + + error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT, + dev_name(&pdev->dev), pdev); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto err3; + } + + for (i = 0; i < SH_KEYSC_MAXKEYS; i++) + __set_bit(pdata->keycodes[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto err4; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) | + pdata->scan_timing); + sh_keysc_level_mode(priv, 0); + + device_init_wakeup(&pdev->dev, 1); + + return 0; + + err4: + free_irq(irq, pdev); + err3: + input_free_device(input); + err2: + iounmap(priv->iomem_base); + err1: + kfree(priv); + err0: + return error; +} + +static int sh_keysc_remove(struct platform_device *pdev) +{ + struct sh_keysc_priv *priv = platform_get_drvdata(pdev); + + sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED); + + input_unregister_device(priv->input); + free_irq(platform_get_irq(pdev, 0), pdev); + iounmap(priv->iomem_base); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sh_keysc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_keysc_priv *priv = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + unsigned short value; + + value = sh_keysc_read(priv, KYCR1); + + if (device_may_wakeup(dev)) { + sh_keysc_write(priv, KYCR1, value | 0x80); + enable_irq_wake(irq); + } else { + sh_keysc_write(priv, KYCR1, value & ~0x80); + pm_runtime_put_sync(dev); + } + + return 0; +} + +static int sh_keysc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + disable_irq_wake(irq); + else + pm_runtime_get_sync(dev); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops, + sh_keysc_suspend, sh_keysc_resume); + +static struct platform_driver sh_keysc_device_driver = { + .probe = sh_keysc_probe, + .remove = sh_keysc_remove, + .driver = { + .name = "sh_keysc", + .pm = &sh_keysc_dev_pm_ops, + } +}; +module_platform_driver(sh_keysc_device_driver); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c new file mode 100644 index 000000000..4c67cf30a --- /dev/null +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Driver for the IMX SNVS ON/OFF Power Key +// Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved. + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +#define SNVS_LPSR_REG 0x4C /* LP Status Register */ +#define SNVS_LPCR_REG 0x38 /* LP Control Register */ +#define SNVS_HPSR_REG 0x14 +#define SNVS_HPSR_BTN BIT(6) +#define SNVS_LPSR_SPO BIT(18) +#define SNVS_LPCR_DEP_EN BIT(5) + +#define DEBOUNCE_TIME 30 +#define REPEAT_INTERVAL 60 + +struct pwrkey_drv_data { + struct regmap *snvs; + int irq; + int keycode; + int keystate; /* 1:pressed */ + int wakeup; + struct timer_list check_timer; + struct input_dev *input; +}; + +static void imx_imx_snvs_check_for_events(struct timer_list *t) +{ + struct pwrkey_drv_data *pdata = from_timer(pdata, t, check_timer); + struct input_dev *input = pdata->input; + u32 state; + + regmap_read(pdata->snvs, SNVS_HPSR_REG, &state); + state = state & SNVS_HPSR_BTN ? 1 : 0; + + /* only report new event if status changed */ + if (state ^ pdata->keystate) { + pdata->keystate = state; + input_event(input, EV_KEY, pdata->keycode, state); + input_sync(input); + pm_relax(pdata->input->dev.parent); + } + + /* repeat check if pressed long */ + if (state) { + mod_timer(&pdata->check_timer, + jiffies + msecs_to_jiffies(REPEAT_INTERVAL)); + } +} + +static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + u32 lp_status; + + pm_wakeup_event(pdata->input->dev.parent, 0); + + regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status); + if (lp_status & SNVS_LPSR_SPO) + mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); + + /* clear SPO status */ + regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO); + + return IRQ_HANDLED; +} + +static void imx_snvs_pwrkey_act(void *pdata) +{ + struct pwrkey_drv_data *pd = pdata; + + del_timer_sync(&pd->check_timer); +} + +static int imx_snvs_pwrkey_probe(struct platform_device *pdev) +{ + struct pwrkey_drv_data *pdata = NULL; + struct input_dev *input = NULL; + struct device_node *np; + int error; + + /* Get SNVS register Page */ + np = pdev->dev.of_node; + if (!np) + return -ENODEV; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->snvs = syscon_regmap_lookup_by_phandle(np, "regmap"); + if (IS_ERR(pdata->snvs)) { + dev_err(&pdev->dev, "Can't get snvs syscon\n"); + return PTR_ERR(pdata->snvs); + } + + if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) { + pdata->keycode = KEY_POWER; + dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n"); + } + + pdata->wakeup = of_property_read_bool(np, "wakeup-source"); + + pdata->irq = platform_get_irq(pdev, 0); + if (pdata->irq < 0) { + dev_err(&pdev->dev, "no irq defined in platform data\n"); + return -EINVAL; + } + + regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN); + + /* clear the unexpected interrupt before driver ready */ + regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO); + + timer_setup(&pdata->check_timer, imx_imx_snvs_check_for_events, 0); + + input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + input->name = pdev->name; + input->phys = "snvs-pwrkey/input0"; + input->id.bustype = BUS_HOST; + + input_set_capability(input, EV_KEY, pdata->keycode); + + /* input customer action to cancel release timer */ + error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata); + if (error) { + dev_err(&pdev->dev, "failed to register remove action\n"); + return error; + } + + pdata->input = input; + platform_set_drvdata(pdev, pdata); + + error = devm_request_irq(&pdev->dev, pdata->irq, + imx_snvs_pwrkey_interrupt, + 0, pdev->name, pdev); + + if (error) { + dev_err(&pdev->dev, "interrupt not available.\n"); + return error; + } + + error = input_register_device(input); + if (error < 0) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + device_init_wakeup(&pdev->dev, pdata->wakeup); + + return 0; +} + +static int __maybe_unused imx_snvs_pwrkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(pdata->irq); + + return 0; +} + +static int __maybe_unused imx_snvs_pwrkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(pdata->irq); + + return 0; +} + +static const struct of_device_id imx_snvs_pwrkey_ids[] = { + { .compatible = "fsl,sec-v4.0-pwrkey" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids); + +static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend, + imx_snvs_pwrkey_resume); + +static struct platform_driver imx_snvs_pwrkey_driver = { + .driver = { + .name = "snvs_pwrkey", + .pm = &imx_snvs_pwrkey_pm_ops, + .of_match_table = imx_snvs_pwrkey_ids, + }, + .probe = imx_snvs_pwrkey_probe, +}; +module_platform_driver(imx_snvs_pwrkey_driver); + +MODULE_AUTHOR("Freescale Semiconductor"); +MODULE_DESCRIPTION("i.MX snvs power key Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c new file mode 100644 index 000000000..7d25fa338 --- /dev/null +++ b/drivers/input/keyboard/spear-keyboard.c @@ -0,0 +1,392 @@ +/* + * SPEAr Keyboard Driver + * Based on omap-keypad driver + * + * Copyright (C) 2010 ST Microelectronics + * Rajeev Kumar <rajeevkumar.linux@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeup.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/platform_data/keyboard-spear.h> + +/* Keyboard Registers */ +#define MODE_CTL_REG 0x00 +#define STATUS_REG 0x0C +#define DATA_REG 0x10 +#define INTR_MASK 0x54 + +/* Register Values */ +#define NUM_ROWS 16 +#define NUM_COLS 16 +#define MODE_CTL_PCLK_FREQ_SHIFT 9 +#define MODE_CTL_PCLK_FREQ_MSK 0x7F + +#define MODE_CTL_KEYBOARD (0x2 << 0) +#define MODE_CTL_SCAN_RATE_10 (0x0 << 2) +#define MODE_CTL_SCAN_RATE_20 (0x1 << 2) +#define MODE_CTL_SCAN_RATE_40 (0x2 << 2) +#define MODE_CTL_SCAN_RATE_80 (0x3 << 2) +#define MODE_CTL_KEYNUM_SHIFT 6 +#define MODE_CTL_START_SCAN (0x1 << 8) + +#define STATUS_DATA_AVAIL (0x1 << 1) + +#define DATA_ROW_MASK 0xF0 +#define DATA_COLUMN_MASK 0x0F + +#define ROW_SHIFT 4 + +struct spear_kbd { + struct input_dev *input; + void __iomem *io_base; + struct clk *clk; + unsigned int irq; + unsigned int mode; + unsigned int suspended_rate; + unsigned short last_key; + unsigned short keycodes[NUM_ROWS * NUM_COLS]; + bool rep; + bool irq_wake_enabled; + u32 mode_ctl_reg; +}; + +static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id) +{ + struct spear_kbd *kbd = dev_id; + struct input_dev *input = kbd->input; + unsigned int key; + u32 sts, val; + + sts = readl_relaxed(kbd->io_base + STATUS_REG); + if (!(sts & STATUS_DATA_AVAIL)) + return IRQ_NONE; + + if (kbd->last_key != KEY_RESERVED) { + input_report_key(input, kbd->last_key, 0); + kbd->last_key = KEY_RESERVED; + } + + /* following reads active (row, col) pair */ + val = readl_relaxed(kbd->io_base + DATA_REG) & + (DATA_ROW_MASK | DATA_COLUMN_MASK); + key = kbd->keycodes[val]; + + input_event(input, EV_MSC, MSC_SCAN, val); + input_report_key(input, key, 1); + input_sync(input); + + kbd->last_key = key; + + /* clear interrupt */ + writel_relaxed(0, kbd->io_base + STATUS_REG); + + return IRQ_HANDLED; +} + +static int spear_kbd_open(struct input_dev *dev) +{ + struct spear_kbd *kbd = input_get_drvdata(dev); + int error; + u32 val; + + kbd->last_key = KEY_RESERVED; + + error = clk_enable(kbd->clk); + if (error) + return error; + + /* keyboard rate to be programmed is input clock (in MHz) - 1 */ + val = clk_get_rate(kbd->clk) / 1000000 - 1; + val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT; + + /* program keyboard */ + val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val | + (kbd->mode << MODE_CTL_KEYNUM_SHIFT); + writel_relaxed(val, kbd->io_base + MODE_CTL_REG); + writel_relaxed(1, kbd->io_base + STATUS_REG); + + /* start key scan */ + val = readl_relaxed(kbd->io_base + MODE_CTL_REG); + val |= MODE_CTL_START_SCAN; + writel_relaxed(val, kbd->io_base + MODE_CTL_REG); + + return 0; +} + +static void spear_kbd_close(struct input_dev *dev) +{ + struct spear_kbd *kbd = input_get_drvdata(dev); + u32 val; + + /* stop key scan */ + val = readl_relaxed(kbd->io_base + MODE_CTL_REG); + val &= ~MODE_CTL_START_SCAN; + writel_relaxed(val, kbd->io_base + MODE_CTL_REG); + + clk_disable(kbd->clk); + + kbd->last_key = KEY_RESERVED; +} + +#ifdef CONFIG_OF +static int spear_kbd_parse_dt(struct platform_device *pdev, + struct spear_kbd *kbd) +{ + struct device_node *np = pdev->dev.of_node; + int error; + u32 val, suspended_rate; + + if (!np) { + dev_err(&pdev->dev, "Missing DT data\n"); + return -EINVAL; + } + + if (of_property_read_bool(np, "autorepeat")) + kbd->rep = true; + + if (of_property_read_u32(np, "suspended_rate", &suspended_rate)) + kbd->suspended_rate = suspended_rate; + + error = of_property_read_u32(np, "st,mode", &val); + if (error) { + dev_err(&pdev->dev, "DT: Invalid or missing mode\n"); + return error; + } + + kbd->mode = val; + return 0; +} +#else +static inline int spear_kbd_parse_dt(struct platform_device *pdev, + struct spear_kbd *kbd) +{ + return -ENOSYS; +} +#endif + +static int spear_kbd_probe(struct platform_device *pdev) +{ + struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev); + const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL; + struct spear_kbd *kbd; + struct input_dev *input_dev; + struct resource *res; + int irq; + int error; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "not able to get irq for the device\n"); + return irq; + } + + kbd = devm_kzalloc(&pdev->dev, sizeof(*kbd), GFP_KERNEL); + if (!kbd) { + dev_err(&pdev->dev, "not enough memory for driver data\n"); + return -ENOMEM; + } + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "unable to allocate input device\n"); + return -ENOMEM; + } + + kbd->input = input_dev; + kbd->irq = irq; + + if (!pdata) { + error = spear_kbd_parse_dt(pdev, kbd); + if (error) + return error; + } else { + kbd->mode = pdata->mode; + kbd->rep = pdata->rep; + kbd->suspended_rate = pdata->suspended_rate; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kbd->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kbd->io_base)) + return PTR_ERR(kbd->io_base); + + kbd->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(kbd->clk)) + return PTR_ERR(kbd->clk); + + input_dev->name = "Spear Keyboard"; + input_dev->phys = "keyboard/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->open = spear_kbd_open; + input_dev->close = spear_kbd_close; + + error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS, + kbd->keycodes, input_dev); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + return error; + } + + if (kbd->rep) + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_set_drvdata(input_dev, kbd); + + error = devm_request_irq(&pdev->dev, irq, spear_kbd_interrupt, 0, + "keyboard", kbd); + if (error) { + dev_err(&pdev->dev, "request_irq failed\n"); + return error; + } + + error = clk_prepare(kbd->clk); + if (error) + return error; + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "Unable to register keyboard device\n"); + clk_unprepare(kbd->clk); + return error; + } + + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, kbd); + + return 0; +} + +static int spear_kbd_remove(struct platform_device *pdev) +{ + struct spear_kbd *kbd = platform_get_drvdata(pdev); + + input_unregister_device(kbd->input); + clk_unprepare(kbd->clk); + + return 0; +} + +static int __maybe_unused spear_kbd_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spear_kbd *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input; + unsigned int rate = 0, mode_ctl_reg, val; + + mutex_lock(&input_dev->mutex); + + /* explicitly enable clock as we may program device */ + clk_enable(kbd->clk); + + mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG); + + if (device_may_wakeup(&pdev->dev)) { + if (!enable_irq_wake(kbd->irq)) + kbd->irq_wake_enabled = true; + + /* + * reprogram the keyboard operating frequency as on some + * platform it may change during system suspended + */ + if (kbd->suspended_rate) + rate = kbd->suspended_rate / 1000000 - 1; + else + rate = clk_get_rate(kbd->clk) / 1000000 - 1; + + val = mode_ctl_reg & + ~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT); + val |= (rate & MODE_CTL_PCLK_FREQ_MSK) + << MODE_CTL_PCLK_FREQ_SHIFT; + writel_relaxed(val, kbd->io_base + MODE_CTL_REG); + + } else { + if (input_dev->users) { + writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN, + kbd->io_base + MODE_CTL_REG); + clk_disable(kbd->clk); + } + } + + /* store current configuration */ + if (input_dev->users) + kbd->mode_ctl_reg = mode_ctl_reg; + + /* restore previous clk state */ + clk_disable(kbd->clk); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int __maybe_unused spear_kbd_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spear_kbd *kbd = platform_get_drvdata(pdev); + struct input_dev *input_dev = kbd->input; + + mutex_lock(&input_dev->mutex); + + if (device_may_wakeup(&pdev->dev)) { + if (kbd->irq_wake_enabled) { + kbd->irq_wake_enabled = false; + disable_irq_wake(kbd->irq); + } + } else { + if (input_dev->users) + clk_enable(kbd->clk); + } + + /* restore current configuration */ + if (input_dev->users) + writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume); + +#ifdef CONFIG_OF +static const struct of_device_id spear_kbd_id_table[] = { + { .compatible = "st,spear300-kbd" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_kbd_id_table); +#endif + +static struct platform_driver spear_kbd_driver = { + .probe = spear_kbd_probe, + .remove = spear_kbd_remove, + .driver = { + .name = "keyboard", + .pm = &spear_kbd_pm_ops, + .of_match_table = of_match_ptr(spear_kbd_id_table), + }, +}; +module_platform_driver(spear_kbd_driver); + +MODULE_AUTHOR("Rajeev Kumar"); +MODULE_DESCRIPTION("SPEAr Keyboard Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c new file mode 100644 index 000000000..3b85631fd --- /dev/null +++ b/drivers/input/keyboard/st-keyscan.c @@ -0,0 +1,276 @@ +/* + * STMicroelectronics Key Scanning driver + * + * Copyright (c) 2014 STMicroelectonics Ltd. + * Author: Stuart Menefy <stuart.menefy@st.com> + * + * Based on sh_keysc.c, copyright 2008 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/input/matrix_keypad.h> + +#define ST_KEYSCAN_MAXKEYS 16 + +#define KEYSCAN_CONFIG_OFF 0x0 +#define KEYSCAN_CONFIG_ENABLE 0x1 +#define KEYSCAN_DEBOUNCE_TIME_OFF 0x4 +#define KEYSCAN_MATRIX_STATE_OFF 0x8 +#define KEYSCAN_MATRIX_DIM_OFF 0xc +#define KEYSCAN_MATRIX_DIM_X_SHIFT 0x0 +#define KEYSCAN_MATRIX_DIM_Y_SHIFT 0x2 + +struct st_keyscan { + void __iomem *base; + int irq; + struct clk *clk; + struct input_dev *input_dev; + unsigned long last_state; + unsigned int n_rows; + unsigned int n_cols; + unsigned int debounce_us; +}; + +static irqreturn_t keyscan_isr(int irq, void *dev_id) +{ + struct st_keyscan *keypad = dev_id; + unsigned short *keycode = keypad->input_dev->keycode; + unsigned long state, change; + int bit_nr; + + state = readl(keypad->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff; + change = keypad->last_state ^ state; + keypad->last_state = state; + + for_each_set_bit(bit_nr, &change, BITS_PER_LONG) + input_report_key(keypad->input_dev, + keycode[bit_nr], state & BIT(bit_nr)); + + input_sync(keypad->input_dev); + + return IRQ_HANDLED; +} + +static int keyscan_start(struct st_keyscan *keypad) +{ + int error; + + error = clk_enable(keypad->clk); + if (error) + return error; + + writel(keypad->debounce_us * (clk_get_rate(keypad->clk) / 1000000), + keypad->base + KEYSCAN_DEBOUNCE_TIME_OFF); + + writel(((keypad->n_cols - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) | + ((keypad->n_rows - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT), + keypad->base + KEYSCAN_MATRIX_DIM_OFF); + + writel(KEYSCAN_CONFIG_ENABLE, keypad->base + KEYSCAN_CONFIG_OFF); + + return 0; +} + +static void keyscan_stop(struct st_keyscan *keypad) +{ + writel(0, keypad->base + KEYSCAN_CONFIG_OFF); + + clk_disable(keypad->clk); +} + +static int keyscan_open(struct input_dev *dev) +{ + struct st_keyscan *keypad = input_get_drvdata(dev); + + return keyscan_start(keypad); +} + +static void keyscan_close(struct input_dev *dev) +{ + struct st_keyscan *keypad = input_get_drvdata(dev); + + keyscan_stop(keypad); +} + +static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data) +{ + struct device *dev = keypad_data->input_dev->dev.parent; + struct device_node *np = dev->of_node; + int error; + + error = matrix_keypad_parse_properties(dev, &keypad_data->n_rows, + &keypad_data->n_cols); + if (error) { + dev_err(dev, "failed to parse keypad params\n"); + return error; + } + + of_property_read_u32(np, "st,debounce-us", &keypad_data->debounce_us); + + dev_dbg(dev, "n_rows=%d n_col=%d debounce=%d\n", + keypad_data->n_rows, keypad_data->n_cols, + keypad_data->debounce_us); + + return 0; +} + +static int keyscan_probe(struct platform_device *pdev) +{ + struct st_keyscan *keypad_data; + struct input_dev *input_dev; + struct resource *res; + int error; + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no DT data present\n"); + return -EINVAL; + } + + keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data), + GFP_KERNEL); + if (!keypad_data) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + input_dev->name = pdev->name; + input_dev->phys = "keyscan-keys/input0"; + input_dev->dev.parent = &pdev->dev; + input_dev->open = keyscan_open; + input_dev->close = keyscan_close; + + input_dev->id.bustype = BUS_HOST; + + keypad_data->input_dev = input_dev; + + error = keypad_matrix_key_parse_dt(keypad_data); + if (error) + return error; + + error = matrix_keypad_build_keymap(NULL, NULL, + keypad_data->n_rows, + keypad_data->n_cols, + NULL, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return error; + } + + input_set_drvdata(input_dev, keypad_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + keypad_data->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(keypad_data->base)) + return PTR_ERR(keypad_data->base); + + keypad_data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad_data->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + return PTR_ERR(keypad_data->clk); + } + + error = clk_enable(keypad_data->clk); + if (error) { + dev_err(&pdev->dev, "failed to enable clock\n"); + return error; + } + + keyscan_stop(keypad_data); + + keypad_data->irq = platform_get_irq(pdev, 0); + if (keypad_data->irq < 0) { + dev_err(&pdev->dev, "no IRQ specified\n"); + return -EINVAL; + } + + error = devm_request_irq(&pdev->dev, keypad_data->irq, keyscan_isr, 0, + pdev->name, keypad_data); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + platform_set_drvdata(pdev, keypad_data); + + device_set_wakeup_capable(&pdev->dev, 1); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int keyscan_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct st_keyscan *keypad = platform_get_drvdata(pdev); + struct input_dev *input = keypad->input_dev; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(dev)) + enable_irq_wake(keypad->irq); + else if (input->users) + keyscan_stop(keypad); + + mutex_unlock(&input->mutex); + return 0; +} + +static int keyscan_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct st_keyscan *keypad = platform_get_drvdata(pdev); + struct input_dev *input = keypad->input_dev; + int retval = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(dev)) + disable_irq_wake(keypad->irq); + else if (input->users) + retval = keyscan_start(keypad); + + mutex_unlock(&input->mutex); + return retval; +} +#endif + +static SIMPLE_DEV_PM_OPS(keyscan_dev_pm_ops, keyscan_suspend, keyscan_resume); + +static const struct of_device_id keyscan_of_match[] = { + { .compatible = "st,sti-keyscan" }, + { }, +}; +MODULE_DEVICE_TABLE(of, keyscan_of_match); + +static struct platform_driver keyscan_device_driver = { + .probe = keyscan_probe, + .driver = { + .name = "st-keyscan", + .pm = &keyscan_dev_pm_ops, + .of_match_table = of_match_ptr(keyscan_of_match), + } +}; + +module_platform_driver(keyscan_device_driver); + +MODULE_AUTHOR("Stuart Menefy <stuart.menefy@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics keyscan device driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c new file mode 100644 index 000000000..d69e631cf --- /dev/null +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -0,0 +1,425 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/stmpe.h> + +/* These are at the same addresses in all STMPE variants */ +#define STMPE_KPC_COL 0x60 +#define STMPE_KPC_ROW_MSB 0x61 +#define STMPE_KPC_ROW_LSB 0x62 +#define STMPE_KPC_CTRL_MSB 0x63 +#define STMPE_KPC_CTRL_LSB 0x64 +#define STMPE_KPC_COMBI_KEY_0 0x65 +#define STMPE_KPC_COMBI_KEY_1 0x66 +#define STMPE_KPC_COMBI_KEY_2 0x67 +#define STMPE_KPC_DATA_BYTE0 0x68 +#define STMPE_KPC_DATA_BYTE1 0x69 +#define STMPE_KPC_DATA_BYTE2 0x6a +#define STMPE_KPC_DATA_BYTE3 0x6b +#define STMPE_KPC_DATA_BYTE4 0x6c + +#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0) +#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1) +#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4) + +#define STMPE_KPC_ROW_MSB_ROWS 0xff + +#define STMPE_KPC_DATA_UP (0x1 << 7) +#define STMPE_KPC_DATA_ROW (0xf << 3) +#define STMPE_KPC_DATA_COL (0x7 << 0) +#define STMPE_KPC_DATA_NOKEY_MASK 0x78 + +#define STMPE_KEYPAD_MAX_DEBOUNCE 127 +#define STMPE_KEYPAD_MAX_SCAN_COUNT 15 + +#define STMPE_KEYPAD_MAX_ROWS 8 +#define STMPE_KEYPAD_MAX_COLS 8 +#define STMPE_KEYPAD_ROW_SHIFT 3 +#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \ + (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS) + + +#define STMPE1601_NUM_DATA 5 +#define STMPE2401_NUM_DATA 3 +#define STMPE2403_NUM_DATA 5 + +/* Make sure it covers all cases above */ +#define MAX_NUM_DATA 5 + +/** + * struct stmpe_keypad_variant - model-specific attributes + * @auto_increment: whether the KPC_DATA_BYTE register address + * auto-increments on multiple read + * @set_pullup: whether the pins need to have their pull-ups set + * @num_data: number of data bytes + * @num_normal_data: number of normal keys' data bytes + * @max_cols: maximum number of columns supported + * @max_rows: maximum number of rows supported + * @col_gpios: bitmask of gpios which can be used for columns + * @row_gpios: bitmask of gpios which can be used for rows + */ +struct stmpe_keypad_variant { + bool auto_increment; + bool set_pullup; + int num_data; + int num_normal_data; + int max_cols; + int max_rows; + unsigned int col_gpios; + unsigned int row_gpios; +}; + +static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { + [STMPE1601] = { + .auto_increment = true, + .num_data = STMPE1601_NUM_DATA, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 8, + .col_gpios = 0x000ff, /* GPIO 0 - 7 */ + .row_gpios = 0x0ff00, /* GPIO 8 - 15 */ + }, + [STMPE2401] = { + .auto_increment = false, + .set_pullup = true, + .num_data = STMPE2401_NUM_DATA, + .num_normal_data = 2, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1f7f00, /* GPIO 8-14, 16-20 */ + }, + [STMPE2403] = { + .auto_increment = true, + .set_pullup = true, + .num_data = STMPE2403_NUM_DATA, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, +}; + +/** + * struct stmpe_keypad - STMPE keypad state container + * @stmpe: pointer to parent STMPE device + * @input: spawned input device + * @variant: STMPE variant + * @debounce_ms: debounce interval, in ms. Maximum is + * %STMPE_KEYPAD_MAX_DEBOUNCE. + * @scan_count: number of key scanning cycles to confirm key data. + * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. + * @no_autorepeat: disable key autorepeat + * @rows: bitmask for the rows + * @cols: bitmask for the columns + * @keymap: the keymap + */ +struct stmpe_keypad { + struct stmpe *stmpe; + struct input_dev *input; + const struct stmpe_keypad_variant *variant; + unsigned int debounce_ms; + unsigned int scan_count; + bool no_autorepeat; + unsigned int rows; + unsigned int cols; + unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE]; +}; + +static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + int i; + + if (variant->auto_increment) + return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0, + variant->num_data, data); + + for (i = 0; i < variant->num_data; i++) { + ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i); + if (ret < 0) + return ret; + + data[i] = ret; + } + + return 0; +} + +static irqreturn_t stmpe_keypad_irq(int irq, void *dev) +{ + struct stmpe_keypad *keypad = dev; + struct input_dev *input = keypad->input; + const struct stmpe_keypad_variant *variant = keypad->variant; + u8 fifo[MAX_NUM_DATA]; + int ret; + int i; + + ret = stmpe_keypad_read_data(keypad, fifo); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < variant->num_normal_data; i++) { + u8 data = fifo[i]; + int row = (data & STMPE_KPC_DATA_ROW) >> 3; + int col = data & STMPE_KPC_DATA_COL; + int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT); + bool up = data & STMPE_KPC_DATA_UP; + + if ((data & STMPE_KPC_DATA_NOKEY_MASK) + == STMPE_KPC_DATA_NOKEY_MASK) + continue; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], !up); + input_sync(input); + } + + return IRQ_HANDLED; +} + +static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + unsigned int col_gpios = variant->col_gpios; + unsigned int row_gpios = variant->row_gpios; + struct stmpe *stmpe = keypad->stmpe; + u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB]; + unsigned int pins = 0; + unsigned int pu_pins = 0; + int ret; + int i; + + /* + * Figure out which pins need to be set to the keypad alternate + * function. + * + * {cols,rows}_gpios are bitmasks of which pins on the chip can be used + * for the keypad. + * + * keypad->{cols,rows} are a bitmask of which pins (of the ones useable + * for the keypad) are used on the board. + */ + + for (i = 0; i < variant->max_cols; i++) { + int num = __ffs(col_gpios); + + if (keypad->cols & (1 << i)) { + pins |= 1 << num; + pu_pins |= 1 << num; + } + + col_gpios &= ~(1 << num); + } + + for (i = 0; i < variant->max_rows; i++) { + int num = __ffs(row_gpios); + + if (keypad->rows & (1 << i)) + pins |= 1 << num; + + row_gpios &= ~(1 << num); + } + + ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD); + if (ret) + return ret; + + /* + * On STMPE24xx, set pin bias to pull-up on all keypad input + * pins (columns), this incidentally happen to be maximum 8 pins + * and placed at GPIO0-7 so only the LSB of the pull up register + * ever needs to be written. + */ + if (variant->set_pullup) { + u8 val; + + ret = stmpe_reg_read(stmpe, pureg); + if (ret) + return ret; + + /* Do not touch unused pins, may be used for GPIO */ + val = ret & ~pu_pins; + val |= pu_pins; + + ret = stmpe_reg_write(stmpe, pureg, val); + } + + return 0; +} + +static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + + if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE) + return -EINVAL; + + if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT) + return -EINVAL; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD); + if (ret < 0) + return ret; + + ret = stmpe_keypad_altfunc_init(keypad); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows); + if (ret < 0) + return ret; + + if (variant->max_rows > 8) { + ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB, + STMPE_KPC_ROW_MSB_ROWS, + keypad->rows >> 8); + if (ret < 0) + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB, + STMPE_KPC_CTRL_MSB_SCAN_COUNT, + keypad->scan_count << 4); + if (ret < 0) + return ret; + + return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB, + STMPE_KPC_CTRL_LSB_SCAN | + STMPE_KPC_CTRL_LSB_DEBOUNCE, + STMPE_KPC_CTRL_LSB_SCAN | + (keypad->debounce_ms << 1)); +} + +static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad, + u32 used_rows, u32 used_cols) +{ + int row, col; + + for (row = 0; row < used_rows; row++) { + for (col = 0; col < used_cols; col++) { + int code = MATRIX_SCAN_CODE(row, col, + STMPE_KEYPAD_ROW_SHIFT); + if (keypad->keymap[code] != KEY_RESERVED) { + keypad->rows |= 1 << row; + keypad->cols |= 1 << col; + } + } + } +} + +static int stmpe_keypad_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct device_node *np = pdev->dev.of_node; + struct stmpe_keypad *keypad; + struct input_dev *input; + u32 rows; + u32 cols; + int error; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad = devm_kzalloc(&pdev->dev, sizeof(struct stmpe_keypad), + GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + keypad->stmpe = stmpe; + keypad->variant = &stmpe_keypad_variants[stmpe->partnum]; + + of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms); + of_property_read_u32(np, "st,scan-count", &keypad->scan_count); + keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat"); + + input = devm_input_allocate_device(&pdev->dev); + if (!input) + return -ENOMEM; + + input->name = "STMPE keypad"; + input->id.bustype = BUS_I2C; + input->dev.parent = &pdev->dev; + + error = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols); + if (error) + return error; + + error = matrix_keypad_build_keymap(NULL, NULL, rows, cols, + keypad->keymap, input); + if (error) + return error; + + input_set_capability(input, EV_MSC, MSC_SCAN); + if (!keypad->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + stmpe_keypad_fill_used_pins(keypad, rows, cols); + + keypad->input = input; + + error = stmpe_keypad_chip_init(keypad); + if (error < 0) + return error; + + error = devm_request_threaded_irq(&pdev->dev, irq, + NULL, stmpe_keypad_irq, + IRQF_ONESHOT, "stmpe-keypad", keypad); + if (error) { + dev_err(&pdev->dev, "unable to get irq: %d\n", error); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", error); + return error; + } + + platform_set_drvdata(pdev, keypad); + + return 0; +} + +static int stmpe_keypad_remove(struct platform_device *pdev) +{ + struct stmpe_keypad *keypad = platform_get_drvdata(pdev); + + stmpe_disable(keypad->stmpe, STMPE_BLOCK_KEYPAD); + + return 0; +} + +static struct platform_driver stmpe_keypad_driver = { + .driver.name = "stmpe-keypad", + .driver.owner = THIS_MODULE, + .probe = stmpe_keypad_probe, + .remove = stmpe_keypad_remove, +}; +module_platform_driver(stmpe_keypad_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPExxxx keypad driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c new file mode 100644 index 000000000..15a5e74db --- /dev/null +++ b/drivers/input/keyboard/stowaway.c @@ -0,0 +1,168 @@ +/* + * Stowaway keyboard driver for Linux + */ + +/* + * Copyright (c) 2006 Marek Vasut + * + * Based on Newton keyboard driver for Linux + * by Justin Cormack + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "Stowaway keyboard driver" + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define SKBD_KEY_MASK 0x7f +#define SKBD_RELEASE 0x80 + +static unsigned char skbd_keycode[128] = { + KEY_1, KEY_2, KEY_3, KEY_Z, KEY_4, KEY_5, KEY_6, KEY_7, + 0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_T, KEY_Y, KEY_GRAVE, + KEY_X, KEY_A, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_SPACE, + KEY_CAPSLOCK, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, + 0, 0, 0, KEY_LEFTALT, 0, 0, 0, 0, + 0, 0, 0, 0, KEY_C, KEY_V, KEY_B, KEY_N, + KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_HOME, KEY_8, KEY_9, KEY_0, KEY_ESC, + KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_END, KEY_U, KEY_I, KEY_O, KEY_P, + KEY_APOSTROPHE, KEY_ENTER, KEY_PAGEUP,0, KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, + KEY_SLASH, KEY_UP, KEY_PAGEDOWN, 0,KEY_M, KEY_COMMA, KEY_DOT, KEY_INSERT, + KEY_DELETE, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, + KEY_LEFTSHIFT, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, + KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, 0, 0, 0 +}; + +struct skbd { + unsigned char keycode[128]; + struct input_dev *dev; + struct serio *serio; + char phys[32]; +}; + +static irqreturn_t skbd_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct skbd *skbd = serio_get_drvdata(serio); + struct input_dev *dev = skbd->dev; + + if (skbd->keycode[data & SKBD_KEY_MASK]) { + input_report_key(dev, skbd->keycode[data & SKBD_KEY_MASK], + !(data & SKBD_RELEASE)); + input_sync(dev); + } + + return IRQ_HANDLED; +} + +static int skbd_connect(struct serio *serio, struct serio_driver *drv) +{ + struct skbd *skbd; + struct input_dev *input_dev; + int err = -ENOMEM; + int i; + + skbd = kzalloc(sizeof(struct skbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!skbd || !input_dev) + goto fail1; + + skbd->serio = serio; + skbd->dev = input_dev; + snprintf(skbd->phys, sizeof(skbd->phys), "%s/input0", serio->phys); + memcpy(skbd->keycode, skbd_keycode, sizeof(skbd->keycode)); + + input_dev->name = "Stowaway Keyboard"; + input_dev->phys = skbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_STOWAWAY; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycode = skbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(skbd_keycode); + for (i = 0; i < ARRAY_SIZE(skbd_keycode); i++) + set_bit(skbd_keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + + serio_set_drvdata(serio, skbd); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(skbd->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(skbd); + return err; +} + +static void skbd_disconnect(struct serio *serio) +{ + struct skbd *skbd = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(skbd->dev); + kfree(skbd); +} + +static const struct serio_device_id skbd_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_STOWAWAY, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, skbd_serio_ids); + +static struct serio_driver skbd_drv = { + .driver = { + .name = "stowaway", + }, + .description = DRIVER_DESC, + .id_table = skbd_serio_ids, + .interrupt = skbd_interrupt, + .connect = skbd_connect, + .disconnect = skbd_disconnect, +}; + +module_serio_driver(skbd_drv); diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c new file mode 100644 index 000000000..a37c17245 --- /dev/null +++ b/drivers/input/keyboard/sun4i-lradc-keys.c @@ -0,0 +1,285 @@ +/* + * Allwinner sun4i low res adc attached tablet keys driver + * + * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Allwinnner sunxi SoCs have a lradc which is specifically designed to have + * various (tablet) keys (ie home, back, search, etc). attached to it using + * a resistor network. This driver is for the keys on such boards. + * + * There are 2 channels, currently this driver only supports channel 0 since + * there are no boards known to use channel 1. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define LRADC_CTRL 0x00 +#define LRADC_INTC 0x04 +#define LRADC_INTS 0x08 +#define LRADC_DATA0 0x0c +#define LRADC_DATA1 0x10 + +/* LRADC_CTRL bits */ +#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ +#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ +#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ +#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ +#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ +#define HOLD_EN(x) ((x) << 6) +#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ +#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ +#define ENABLE(x) ((x) << 0) + +/* LRADC_INTC and LRADC_INTS bits */ +#define CHAN1_KEYUP_IRQ BIT(12) +#define CHAN1_ALRDY_HOLD_IRQ BIT(11) +#define CHAN1_HOLD_IRQ BIT(10) +#define CHAN1_KEYDOWN_IRQ BIT(9) +#define CHAN1_DATA_IRQ BIT(8) +#define CHAN0_KEYUP_IRQ BIT(4) +#define CHAN0_ALRDY_HOLD_IRQ BIT(3) +#define CHAN0_HOLD_IRQ BIT(2) +#define CHAN0_KEYDOWN_IRQ BIT(1) +#define CHAN0_DATA_IRQ BIT(0) + +struct sun4i_lradc_keymap { + u32 voltage; + u32 keycode; +}; + +struct sun4i_lradc_data { + struct device *dev; + struct input_dev *input; + void __iomem *base; + struct regulator *vref_supply; + struct sun4i_lradc_keymap *chan0_map; + u32 chan0_map_count; + u32 chan0_keycode; + u32 vref; +}; + +static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) +{ + struct sun4i_lradc_data *lradc = dev_id; + u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; + + ints = readl(lradc->base + LRADC_INTS); + + /* + * lradc supports only one keypress at a time, release does not give + * any info as to which key was released, so we cache the keycode. + */ + + if (ints & CHAN0_KEYUP_IRQ) { + input_report_key(lradc->input, lradc->chan0_keycode, 0); + lradc->chan0_keycode = 0; + } + + if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { + val = readl(lradc->base + LRADC_DATA0) & 0x3f; + voltage = val * lradc->vref / 63; + + for (i = 0; i < lradc->chan0_map_count; i++) { + diff = abs(lradc->chan0_map[i].voltage - voltage); + if (diff < closest) { + closest = diff; + keycode = lradc->chan0_map[i].keycode; + } + } + + lradc->chan0_keycode = keycode; + input_report_key(lradc->input, lradc->chan0_keycode, 1); + } + + input_sync(lradc->input); + + writel(ints, lradc->base + LRADC_INTS); + + return IRQ_HANDLED; +} + +static int sun4i_lradc_open(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + int error; + + error = regulator_enable(lradc->vref_supply); + if (error) + return error; + + /* lradc Vref internally is divided by 2/3 */ + lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3; + + /* + * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to + * stabilize on press, wait (1 + 1) * 4 ms for key release + */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL); + + writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); + + return 0; +} + +static void sun4i_lradc_close(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + + /* Disable lradc, leave other settings unchanged */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(2), lradc->base + LRADC_CTRL); + writel(0, lradc->base + LRADC_INTC); + + regulator_disable(lradc->vref_supply); +} + +static int sun4i_lradc_load_dt_keymap(struct device *dev, + struct sun4i_lradc_data *lradc) +{ + struct device_node *np, *pp; + int i; + int error; + + np = dev->of_node; + if (!np) + return -EINVAL; + + lradc->chan0_map_count = of_get_child_count(np); + if (lradc->chan0_map_count == 0) { + dev_err(dev, "keymap is missing in device tree\n"); + return -EINVAL; + } + + lradc->chan0_map = devm_kmalloc_array(dev, lradc->chan0_map_count, + sizeof(struct sun4i_lradc_keymap), + GFP_KERNEL); + if (!lradc->chan0_map) + return -ENOMEM; + + i = 0; + for_each_child_of_node(np, pp) { + struct sun4i_lradc_keymap *map = &lradc->chan0_map[i]; + u32 channel; + + error = of_property_read_u32(pp, "channel", &channel); + if (error || channel != 0) { + dev_err(dev, "%s: Inval channel prop\n", pp->name); + return -EINVAL; + } + + error = of_property_read_u32(pp, "voltage", &map->voltage); + if (error) { + dev_err(dev, "%s: Inval voltage prop\n", pp->name); + return -EINVAL; + } + + error = of_property_read_u32(pp, "linux,code", &map->keycode); + if (error) { + dev_err(dev, "%s: Inval linux,code prop\n", pp->name); + return -EINVAL; + } + + i++; + } + + return 0; +} + +static int sun4i_lradc_probe(struct platform_device *pdev) +{ + struct sun4i_lradc_data *lradc; + struct device *dev = &pdev->dev; + int i; + int error; + + lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); + if (!lradc) + return -ENOMEM; + + error = sun4i_lradc_load_dt_keymap(dev, lradc); + if (error) + return error; + + lradc->vref_supply = devm_regulator_get(dev, "vref"); + if (IS_ERR(lradc->vref_supply)) + return PTR_ERR(lradc->vref_supply); + + lradc->dev = dev; + lradc->input = devm_input_allocate_device(dev); + if (!lradc->input) + return -ENOMEM; + + lradc->input->name = pdev->name; + lradc->input->phys = "sun4i_lradc/input0"; + lradc->input->open = sun4i_lradc_open; + lradc->input->close = sun4i_lradc_close; + lradc->input->id.bustype = BUS_HOST; + lradc->input->id.vendor = 0x0001; + lradc->input->id.product = 0x0001; + lradc->input->id.version = 0x0100; + + __set_bit(EV_KEY, lradc->input->evbit); + for (i = 0; i < lradc->chan0_map_count; i++) + __set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit); + + input_set_drvdata(lradc->input, lradc); + + lradc->base = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + error = devm_request_irq(dev, platform_get_irq(pdev, 0), + sun4i_lradc_irq, 0, + "sun4i-a10-lradc-keys", lradc); + if (error) + return error; + + error = input_register_device(lradc->input); + if (error) + return error; + + return 0; +} + +static const struct of_device_id sun4i_lradc_of_match[] = { + { .compatible = "allwinner,sun4i-a10-lradc-keys", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); + +static struct platform_driver sun4i_lradc_driver = { + .driver = { + .name = "sun4i-a10-lradc-keys", + .of_match_table = of_match_ptr(sun4i_lradc_of_match), + }, + .probe = sun4i_lradc_probe, +}; + +module_platform_driver(sun4i_lradc_driver); + +MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c new file mode 100644 index 000000000..1c7aa86c9 --- /dev/null +++ b/drivers/input/keyboard/sunkbd.c @@ -0,0 +1,392 @@ +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + */ + +/* + * Sun keyboard driver for Linux + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/workqueue.h> + +#define DRIVER_DESC "Sun keyboard driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +static unsigned char sunkbd_keycode[128] = { + 0,128,114,129,115, 59, 60, 68, 61, 87, 62, 88, 63,100, 64,112, + 65, 66, 67, 56,103,119, 99, 70,105,130,131,108,106, 1, 2, 3, + 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 41, 14,110,113, 98, 55, + 116,132, 83,133,102, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, + 26, 27,111,127, 71, 72, 73, 74,134,135,107, 0, 29, 30, 31, 32, + 33, 34, 35, 36, 37, 38, 39, 40, 43, 28, 96, 75, 76, 77, 82,136, + 104,137, 69, 42, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,101, + 79, 80, 81, 0, 0, 0,138, 58,125, 57,126,109, 86, 78 +}; + +#define SUNKBD_CMD_RESET 0x1 +#define SUNKBD_CMD_BELLON 0x2 +#define SUNKBD_CMD_BELLOFF 0x3 +#define SUNKBD_CMD_CLICK 0xa +#define SUNKBD_CMD_NOCLICK 0xb +#define SUNKBD_CMD_SETLED 0xe +#define SUNKBD_CMD_LAYOUT 0xf + +#define SUNKBD_RET_RESET 0xff +#define SUNKBD_RET_ALLUP 0x7f +#define SUNKBD_RET_LAYOUT 0xfe + +#define SUNKBD_LAYOUT_5_MASK 0x20 +#define SUNKBD_RELEASE 0x80 +#define SUNKBD_KEY 0x7f + +/* + * Per-keyboard data. + */ + +struct sunkbd { + unsigned char keycode[ARRAY_SIZE(sunkbd_keycode)]; + struct input_dev *dev; + struct serio *serio; + struct work_struct tq; + wait_queue_head_t wait; + char name[64]; + char phys[32]; + char type; + bool enabled; + volatile s8 reset; + volatile s8 layout; +}; + +/* + * sunkbd_interrupt() is called by the low level driver when a character + * is received. + */ + +static irqreturn_t sunkbd_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct sunkbd *sunkbd = serio_get_drvdata(serio); + + if (sunkbd->reset <= -1) { + /* + * If cp[i] is 0xff, sunkbd->reset will stay -1. + * The keyboard sends 0xff 0xff 0xID on powerup. + */ + sunkbd->reset = data; + wake_up_interruptible(&sunkbd->wait); + goto out; + } + + if (sunkbd->layout == -1) { + sunkbd->layout = data; + wake_up_interruptible(&sunkbd->wait); + goto out; + } + + switch (data) { + + case SUNKBD_RET_RESET: + if (sunkbd->enabled) + schedule_work(&sunkbd->tq); + sunkbd->reset = -1; + break; + + case SUNKBD_RET_LAYOUT: + sunkbd->layout = -1; + break; + + case SUNKBD_RET_ALLUP: /* All keys released */ + break; + + default: + if (!sunkbd->enabled) + break; + + if (sunkbd->keycode[data & SUNKBD_KEY]) { + input_report_key(sunkbd->dev, + sunkbd->keycode[data & SUNKBD_KEY], + !(data & SUNKBD_RELEASE)); + input_sync(sunkbd->dev); + } else { + printk(KERN_WARNING + "sunkbd.c: Unknown key (scancode %#x) %s.\n", + data & SUNKBD_KEY, + data & SUNKBD_RELEASE ? "released" : "pressed"); + } + } +out: + return IRQ_HANDLED; +} + +/* + * sunkbd_event() handles events from the input module. + */ + +static int sunkbd_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) +{ + struct sunkbd *sunkbd = input_get_drvdata(dev); + + switch (type) { + + case EV_LED: + + serio_write(sunkbd->serio, SUNKBD_CMD_SETLED); + serio_write(sunkbd->serio, + (!!test_bit(LED_CAPSL, dev->led) << 3) | + (!!test_bit(LED_SCROLLL, dev->led) << 2) | + (!!test_bit(LED_COMPOSE, dev->led) << 1) | + !!test_bit(LED_NUML, dev->led)); + return 0; + + case EV_SND: + + switch (code) { + + case SND_CLICK: + serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value); + return 0; + + case SND_BELL: + serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value); + return 0; + } + + break; + } + + return -1; +} + +/* + * sunkbd_initialize() checks for a Sun keyboard attached, and determines + * its type. + */ + +static int sunkbd_initialize(struct sunkbd *sunkbd) +{ + sunkbd->reset = -2; + serio_write(sunkbd->serio, SUNKBD_CMD_RESET); + wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ); + if (sunkbd->reset < 0) + return -1; + + sunkbd->type = sunkbd->reset; + + if (sunkbd->type == 4) { /* Type 4 keyboard */ + sunkbd->layout = -2; + serio_write(sunkbd->serio, SUNKBD_CMD_LAYOUT); + wait_event_interruptible_timeout(sunkbd->wait, + sunkbd->layout >= 0, HZ / 4); + if (sunkbd->layout < 0) + return -1; + if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) + sunkbd->type = 5; + } + + return 0; +} + +/* + * sunkbd_set_leds_beeps() sets leds and beeps to a state the computer remembers + * they were in. + */ + +static void sunkbd_set_leds_beeps(struct sunkbd *sunkbd) +{ + serio_write(sunkbd->serio, SUNKBD_CMD_SETLED); + serio_write(sunkbd->serio, + (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | + (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) | + (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | + !!test_bit(LED_NUML, sunkbd->dev->led)); + serio_write(sunkbd->serio, + SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); + serio_write(sunkbd->serio, + SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); +} + + +/* + * sunkbd_reinit() wait for the keyboard reset to complete and restores state + * of leds and beeps. + */ + +static void sunkbd_reinit(struct work_struct *work) +{ + struct sunkbd *sunkbd = container_of(work, struct sunkbd, tq); + + /* + * It is OK that we check sunkbd->enabled without pausing serio, + * as we only want to catch true->false transition that will + * happen once and we will be woken up for it. + */ + wait_event_interruptible_timeout(sunkbd->wait, + sunkbd->reset >= 0 || !sunkbd->enabled, + HZ); + + if (sunkbd->reset >= 0 && sunkbd->enabled) + sunkbd_set_leds_beeps(sunkbd); +} + +static void sunkbd_enable(struct sunkbd *sunkbd, bool enable) +{ + serio_pause_rx(sunkbd->serio); + sunkbd->enabled = enable; + serio_continue_rx(sunkbd->serio); + + if (!enable) { + wake_up_interruptible(&sunkbd->wait); + cancel_work_sync(&sunkbd->tq); + } +} + +/* + * sunkbd_connect() probes for a Sun keyboard and fills the necessary + * structures. + */ + +static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) +{ + struct sunkbd *sunkbd; + struct input_dev *input_dev; + int err = -ENOMEM; + int i; + + sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!sunkbd || !input_dev) + goto fail1; + + sunkbd->serio = serio; + sunkbd->dev = input_dev; + init_waitqueue_head(&sunkbd->wait); + INIT_WORK(&sunkbd->tq, sunkbd_reinit); + snprintf(sunkbd->phys, sizeof(sunkbd->phys), "%s/input0", serio->phys); + + serio_set_drvdata(serio, sunkbd); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + if (sunkbd_initialize(sunkbd) < 0) { + err = -ENODEV; + goto fail3; + } + + snprintf(sunkbd->name, sizeof(sunkbd->name), + "Sun Type %d keyboard", sunkbd->type); + memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode)); + + input_dev->name = sunkbd->name; + input_dev->phys = sunkbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SUNKBD; + input_dev->id.product = sunkbd->type; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_set_drvdata(input_dev, sunkbd); + + input_dev->event = sunkbd_event; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) | + BIT_MASK(EV_SND) | BIT_MASK(EV_REP); + input_dev->ledbit[0] = BIT_MASK(LED_CAPSL) | BIT_MASK(LED_COMPOSE) | + BIT_MASK(LED_SCROLLL) | BIT_MASK(LED_NUML); + input_dev->sndbit[0] = BIT_MASK(SND_CLICK) | BIT_MASK(SND_BELL); + + input_dev->keycode = sunkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode); + for (i = 0; i < ARRAY_SIZE(sunkbd_keycode); i++) + __set_bit(sunkbd->keycode[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); + + sunkbd_enable(sunkbd, true); + + err = input_register_device(sunkbd->dev); + if (err) + goto fail4; + + return 0; + + fail4: sunkbd_enable(sunkbd, false); + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(sunkbd); + return err; +} + +/* + * sunkbd_disconnect() unregisters and closes behind us. + */ + +static void sunkbd_disconnect(struct serio *serio) +{ + struct sunkbd *sunkbd = serio_get_drvdata(serio); + + sunkbd_enable(sunkbd, false); + input_unregister_device(sunkbd->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + kfree(sunkbd); +} + +static const struct serio_device_id sunkbd_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_SUNKBD, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { + .type = SERIO_RS232, + .proto = SERIO_UNKNOWN, /* sunkbd does probe */ + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, sunkbd_serio_ids); + +static struct serio_driver sunkbd_drv = { + .driver = { + .name = "sunkbd", + }, + .description = DRIVER_DESC, + .id_table = sunkbd_serio_ids, + .interrupt = sunkbd_interrupt, + .connect = sunkbd_connect, + .disconnect = sunkbd_disconnect, +}; + +module_serio_driver(sunkbd_drv); diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c new file mode 100644 index 000000000..ec0070e97 --- /dev/null +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -0,0 +1,513 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com> + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + * License Terms: GNU General Public License, version 2 + * + * TC35893 MFD Keypad Controller driver + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/mfd/tc3589x.h> +#include <linux/device.h> + +/* Maximum supported keypad matrix row/columns size */ +#define TC3589x_MAX_KPROW 8 +#define TC3589x_MAX_KPCOL 12 + +/* keypad related Constants */ +#define TC3589x_MAX_DEBOUNCE_SETTLE 0xFF +#define DEDICATED_KEY_VAL 0xFF + +/* Pull up/down masks */ +#define TC3589x_NO_PULL_MASK 0x0 +#define TC3589x_PULL_DOWN_MASK 0x1 +#define TC3589x_PULL_UP_MASK 0x2 +#define TC3589x_PULLUP_ALL_MASK 0xAA +#define TC3589x_IO_PULL_VAL(index, mask) ((mask)<<((index)%4)*2) + +/* Bit masks for IOCFG register */ +#define IOCFG_BALLCFG 0x01 +#define IOCFG_IG 0x08 + +#define KP_EVCODE_COL_MASK 0x0F +#define KP_EVCODE_ROW_MASK 0x70 +#define KP_RELEASE_EVT_MASK 0x80 + +#define KP_ROW_SHIFT 4 + +#define KP_NO_VALID_KEY_MASK 0x7F + +/* bit masks for RESTCTRL register */ +#define TC3589x_KBDRST 0x2 +#define TC3589x_IRQRST 0x10 +#define TC3589x_RESET_ALL 0x1B + +/* KBDMFS register bit mask */ +#define TC3589x_KBDMFS_EN 0x1 + +/* CLKEN register bitmask */ +#define KPD_CLK_EN 0x1 + +/* RSTINTCLR register bit mask */ +#define IRQ_CLEAR 0x1 + +/* bit masks for keyboard interrupts*/ +#define TC3589x_EVT_LOSS_INT 0x8 +#define TC3589x_EVT_INT 0x4 +#define TC3589x_KBD_LOSS_INT 0x2 +#define TC3589x_KBD_INT 0x1 + +/* bit masks for keyboard interrupt clear*/ +#define TC3589x_EVT_INT_CLR 0x2 +#define TC3589x_KBD_INT_CLR 0x1 + +/** + * struct tc35893_keypad_platform_data - platform specific keypad data + * @keymap_data: matrix scan code table for keycodes + * @krow: mask for available rows, value is 0xFF + * @kcol: mask for available columns, value is 0xFF + * @debounce_period: platform specific debounce time + * @settle_time: platform specific settle down time + * @irqtype: type of interrupt, falling or rising edge + * @enable_wakeup: specifies if keypad event can wake up system from sleep + * @no_autorepeat: flag for auto repetition + */ +struct tc3589x_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + u8 krow; + u8 kcol; + u8 debounce_period; + u8 settle_time; + unsigned long irqtype; + bool enable_wakeup; + bool no_autorepeat; +}; + +/** + * struct tc_keypad - data structure used by keypad driver + * @tc3589x: pointer to tc35893 + * @input: pointer to input device object + * @board: keypad platform device + * @krow: number of rows + * @kcol: number of columns + * @keymap: matrix scan code table for keycodes + * @keypad_stopped: holds keypad status + */ +struct tc_keypad { + struct tc3589x *tc3589x; + struct input_dev *input; + const struct tc3589x_keypad_platform_data *board; + unsigned int krow; + unsigned int kcol; + unsigned short *keymap; + bool keypad_stopped; +}; + +static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) +{ + int ret; + struct tc3589x *tc3589x = keypad->tc3589x; + const struct tc3589x_keypad_platform_data *board = keypad->board; + + /* validate platform configuration */ + if (board->kcol > TC3589x_MAX_KPCOL || board->krow > TC3589x_MAX_KPROW) + return -EINVAL; + + /* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */ + ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE, + (board->krow << KP_ROW_SHIFT) | board->kcol); + if (ret < 0) + return ret; + + /* configure dedicated key config, no dedicated key selected */ + ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL); + if (ret < 0) + return ret; + + ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL); + if (ret < 0) + return ret; + + /* Configure settle time */ + ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, + board->settle_time); + if (ret < 0) + return ret; + + /* Configure debounce time */ + ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, + board->debounce_period); + if (ret < 0) + return ret; + + /* Start of initialise keypad GPIOs */ + ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG); + if (ret < 0) + return ret; + + /* Configure pull-up resistors for all row GPIOs */ + ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB, + TC3589x_PULLUP_ALL_MASK); + if (ret < 0) + return ret; + + ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB, + TC3589x_PULLUP_ALL_MASK); + if (ret < 0) + return ret; + + /* Configure pull-up resistors for all column GPIOs */ + ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB, + TC3589x_PULLUP_ALL_MASK); + if (ret < 0) + return ret; + + ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB, + TC3589x_PULLUP_ALL_MASK); + if (ret < 0) + return ret; + + ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB, + TC3589x_PULLUP_ALL_MASK); + + return ret; +} + +#define TC35893_DATA_REGS 4 +#define TC35893_KEYCODE_FIFO_EMPTY 0x7f +#define TC35893_KEYCODE_FIFO_CLEAR 0xff +#define TC35893_KEYPAD_ROW_SHIFT 0x3 + +static irqreturn_t tc3589x_keypad_irq(int irq, void *dev) +{ + struct tc_keypad *keypad = dev; + struct tc3589x *tc3589x = keypad->tc3589x; + u8 i, row_index, col_index, kbd_code, up; + u8 code; + + for (i = 0; i < TC35893_DATA_REGS * 2; i++) { + kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO); + + /* loop till fifo is empty and no more keys are pressed */ + if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY || + kbd_code == TC35893_KEYCODE_FIFO_CLEAR) + continue; + + /* valid key is found */ + col_index = kbd_code & KP_EVCODE_COL_MASK; + row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT; + code = MATRIX_SCAN_CODE(row_index, col_index, + TC35893_KEYPAD_ROW_SHIFT); + up = kbd_code & KP_RELEASE_EVT_MASK; + + input_event(keypad->input, EV_MSC, MSC_SCAN, code); + input_report_key(keypad->input, keypad->keymap[code], !up); + input_sync(keypad->input); + } + + /* clear IRQ */ + tc3589x_set_bits(tc3589x, TC3589x_KBDIC, + 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR); + /* enable IRQ */ + tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, + 0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT); + + return IRQ_HANDLED; +} + +static int tc3589x_keypad_enable(struct tc_keypad *keypad) +{ + struct tc3589x *tc3589x = keypad->tc3589x; + int ret; + + /* pull the keypad module out of reset */ + ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0); + if (ret < 0) + return ret; + + /* configure KBDMFS */ + ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN); + if (ret < 0) + return ret; + + /* enable the keypad clock */ + ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN); + if (ret < 0) + return ret; + + /* clear pending IRQs */ + ret = tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1); + if (ret < 0) + return ret; + + /* enable the IRQs */ + ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0, + TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT); + if (ret < 0) + return ret; + + keypad->keypad_stopped = false; + + return ret; +} + +static int tc3589x_keypad_disable(struct tc_keypad *keypad) +{ + struct tc3589x *tc3589x = keypad->tc3589x; + int ret; + + /* clear IRQ */ + ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC, + 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR); + if (ret < 0) + return ret; + + /* disable all interrupts */ + ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, + ~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0); + if (ret < 0) + return ret; + + /* disable the keypad module */ + ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0); + if (ret < 0) + return ret; + + /* put the keypad module into reset */ + ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1); + + keypad->keypad_stopped = true; + + return ret; +} + +static int tc3589x_keypad_open(struct input_dev *input) +{ + int error; + struct tc_keypad *keypad = input_get_drvdata(input); + + /* enable the keypad module */ + error = tc3589x_keypad_enable(keypad); + if (error < 0) { + dev_err(&input->dev, "failed to enable keypad module\n"); + return error; + } + + error = tc3589x_keypad_init_key_hardware(keypad); + if (error < 0) { + dev_err(&input->dev, "failed to configure keypad module\n"); + return error; + } + + return 0; +} + +static void tc3589x_keypad_close(struct input_dev *input) +{ + struct tc_keypad *keypad = input_get_drvdata(input); + + /* disable the keypad module */ + tc3589x_keypad_disable(keypad); +} + +static const struct tc3589x_keypad_platform_data * +tc3589x_keypad_of_probe(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct tc3589x_keypad_platform_data *plat; + u32 cols, rows; + u32 debounce_ms; + int proplen; + + if (!np) + return ERR_PTR(-ENODEV); + + plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return ERR_PTR(-ENOMEM); + + of_property_read_u32(np, "keypad,num-columns", &cols); + of_property_read_u32(np, "keypad,num-rows", &rows); + plat->kcol = (u8) cols; + plat->krow = (u8) rows; + if (!plat->krow || !plat->kcol || + plat->krow > TC_KPD_ROWS || plat->kcol > TC_KPD_COLUMNS) { + dev_err(dev, + "keypad columns/rows not properly specified (%ux%u)\n", + plat->kcol, plat->krow); + return ERR_PTR(-EINVAL); + } + + if (!of_get_property(np, "linux,keymap", &proplen)) { + dev_err(dev, "property linux,keymap not found\n"); + return ERR_PTR(-ENOENT); + } + + plat->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat"); + + plat->enable_wakeup = of_property_read_bool(np, "wakeup-source") || + /* legacy name */ + of_property_read_bool(np, "linux,wakeup"); + + /* The custom delay format is ms/16 */ + of_property_read_u32(np, "debounce-delay-ms", &debounce_ms); + if (debounce_ms) + plat->debounce_period = debounce_ms * 16; + else + plat->debounce_period = TC_KPD_DEBOUNCE_PERIOD; + + plat->settle_time = TC_KPD_SETTLE_TIME; + /* FIXME: should be property of the IRQ resource? */ + plat->irqtype = IRQF_TRIGGER_FALLING; + + return plat; +} + +static int tc3589x_keypad_probe(struct platform_device *pdev) +{ + struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent); + struct tc_keypad *keypad; + struct input_dev *input; + const struct tc3589x_keypad_platform_data *plat; + int error, irq; + + plat = tc3589x_keypad_of_probe(&pdev->dev); + if (IS_ERR(plat)) { + dev_err(&pdev->dev, "invalid keypad platform data\n"); + return PTR_ERR(plat); + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad = devm_kzalloc(&pdev->dev, sizeof(struct tc_keypad), + GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + keypad->board = plat; + keypad->input = input; + keypad->tc3589x = tc3589x; + + input->id.bustype = BUS_I2C; + input->name = pdev->name; + input->dev.parent = &pdev->dev; + + input->open = tc3589x_keypad_open; + input->close = tc3589x_keypad_close; + + error = matrix_keypad_build_keymap(plat->keymap_data, NULL, + TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL, + NULL, input); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + return error; + } + + keypad->keymap = input->keycode; + + input_set_capability(input, EV_MSC, MSC_SCAN); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + input_set_drvdata(input, keypad); + + tc3589x_keypad_disable(keypad); + + error = devm_request_threaded_irq(&pdev->dev, irq, + NULL, tc3589x_keypad_irq, + plat->irqtype | IRQF_ONESHOT, + "tc3589x-keypad", keypad); + if (error) { + dev_err(&pdev->dev, + "Could not allocate irq %d,error %d\n", + irq, error); + return error; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "Could not register input device\n"); + return error; + } + + /* let platform decide if keypad is a wakeup source or not */ + device_init_wakeup(&pdev->dev, plat->enable_wakeup); + device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup); + + platform_set_drvdata(pdev, keypad); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tc3589x_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tc_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + /* keypad is already off; we do nothing */ + if (keypad->keypad_stopped) + return 0; + + /* if device is not a wakeup source, disable it for powersave */ + if (!device_may_wakeup(&pdev->dev)) + tc3589x_keypad_disable(keypad); + else + enable_irq_wake(irq); + + return 0; +} + +static int tc3589x_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tc_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (!keypad->keypad_stopped) + return 0; + + /* enable the device to resume normal operations */ + if (!device_may_wakeup(&pdev->dev)) + tc3589x_keypad_enable(keypad); + else + disable_irq_wake(irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops, + tc3589x_keypad_suspend, tc3589x_keypad_resume); + +static struct platform_driver tc3589x_keypad_driver = { + .driver = { + .name = "tc3589x-keypad", + .pm = &tc3589x_keypad_dev_pm_ops, + }, + .probe = tc3589x_keypad_probe, +}; +module_platform_driver(tc3589x_keypad_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer"); +MODULE_DESCRIPTION("TC35893 Keypad Driver"); +MODULE_ALIAS("platform:tc3589x-keypad"); diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c new file mode 100644 index 000000000..dc983ab6c --- /dev/null +++ b/drivers/input/keyboard/tca6416-keypad.c @@ -0,0 +1,383 @@ +/* + * Driver for keys on TCA6416 I2C IO expander + * + * Copyright (C) 2010 Texas Instruments + * + * Author : Sriramakrishnan.A.G. <srk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/tca6416_keypad.h> + +#define TCA6416_INPUT 0 +#define TCA6416_OUTPUT 1 +#define TCA6416_INVERT 2 +#define TCA6416_DIRECTION 3 + +static const struct i2c_device_id tca6416_id[] = { + { "tca6416-keys", 16, }, + { "tca6408-keys", 8, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tca6416_id); + +struct tca6416_drv_data { + struct input_dev *input; + struct tca6416_button data[0]; +}; + +struct tca6416_keypad_chip { + uint16_t reg_output; + uint16_t reg_direction; + uint16_t reg_input; + + struct i2c_client *client; + struct input_dev *input; + struct delayed_work dwork; + int io_size; + int irqnum; + u16 pinmask; + bool use_polling; + struct tca6416_button buttons[0]; +}; + +static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val) +{ + int error; + + error = chip->io_size > 8 ? + i2c_smbus_write_word_data(chip->client, reg << 1, val) : + i2c_smbus_write_byte_data(chip->client, reg, val); + if (error < 0) { + dev_err(&chip->client->dev, + "%s failed, reg: %d, val: %d, error: %d\n", + __func__, reg, val, error); + return error; + } + + return 0; +} + +static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val) +{ + int retval; + + retval = chip->io_size > 8 ? + i2c_smbus_read_word_data(chip->client, reg << 1) : + i2c_smbus_read_byte_data(chip->client, reg); + if (retval < 0) { + dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n", + __func__, reg, retval); + return retval; + } + + *val = (u16)retval; + return 0; +} + +static void tca6416_keys_scan(struct tca6416_keypad_chip *chip) +{ + struct input_dev *input = chip->input; + u16 reg_val, val; + int error, i, pin_index; + + error = tca6416_read_reg(chip, TCA6416_INPUT, ®_val); + if (error) + return; + + reg_val &= chip->pinmask; + + /* Figure out which lines have changed */ + val = reg_val ^ chip->reg_input; + chip->reg_input = reg_val; + + for (i = 0, pin_index = 0; i < 16; i++) { + if (val & (1 << i)) { + struct tca6416_button *button = &chip->buttons[pin_index]; + unsigned int type = button->type ?: EV_KEY; + int state = ((reg_val & (1 << i)) ? 1 : 0) + ^ button->active_low; + + input_event(input, type, button->code, !!state); + input_sync(input); + } + + if (chip->pinmask & (1 << i)) + pin_index++; + } +} + +/* + * This is threaded IRQ handler and this can (and will) sleep. + */ +static irqreturn_t tca6416_keys_isr(int irq, void *dev_id) +{ + struct tca6416_keypad_chip *chip = dev_id; + + tca6416_keys_scan(chip); + + return IRQ_HANDLED; +} + +static void tca6416_keys_work_func(struct work_struct *work) +{ + struct tca6416_keypad_chip *chip = + container_of(work, struct tca6416_keypad_chip, dwork.work); + + tca6416_keys_scan(chip); + schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100)); +} + +static int tca6416_keys_open(struct input_dev *dev) +{ + struct tca6416_keypad_chip *chip = input_get_drvdata(dev); + + /* Get initial device state in case it has switches */ + tca6416_keys_scan(chip); + + if (chip->use_polling) + schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100)); + else + enable_irq(chip->irqnum); + + return 0; +} + +static void tca6416_keys_close(struct input_dev *dev) +{ + struct tca6416_keypad_chip *chip = input_get_drvdata(dev); + + if (chip->use_polling) + cancel_delayed_work_sync(&chip->dwork); + else + disable_irq(chip->irqnum); +} + +static int tca6416_setup_registers(struct tca6416_keypad_chip *chip) +{ + int error; + + error = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output); + if (error) + return error; + + error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction); + if (error) + return error; + + /* ensure that keypad pins are set to input */ + error = tca6416_write_reg(chip, TCA6416_DIRECTION, + chip->reg_direction | chip->pinmask); + if (error) + return error; + + error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction); + if (error) + return error; + + error = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input); + if (error) + return error; + + chip->reg_input &= chip->pinmask; + + return 0; +} + +static int tca6416_keypad_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tca6416_keys_platform_data *pdata; + struct tca6416_keypad_chip *chip; + struct input_dev *input; + int error; + int i; + + /* Check functionality */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) { + dev_err(&client->dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + pdata = dev_get_platdata(&client->dev); + if (!pdata) { + dev_dbg(&client->dev, "no platform data\n"); + return -EINVAL; + } + + chip = kzalloc(sizeof(struct tca6416_keypad_chip) + + pdata->nbuttons * sizeof(struct tca6416_button), + GFP_KERNEL); + input = input_allocate_device(); + if (!chip || !input) { + error = -ENOMEM; + goto fail1; + } + + chip->client = client; + chip->input = input; + chip->io_size = id->driver_data; + chip->pinmask = pdata->pinmask; + chip->use_polling = pdata->use_polling; + + INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func); + + input->phys = "tca6416-keys/input0"; + input->name = client->name; + input->dev.parent = &client->dev; + + input->open = tca6416_keys_open; + input->close = tca6416_keys_close; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < pdata->nbuttons; i++) { + unsigned int type; + + chip->buttons[i] = pdata->buttons[i]; + type = (pdata->buttons[i].type) ?: EV_KEY; + input_set_capability(input, type, pdata->buttons[i].code); + } + + input_set_drvdata(input, chip); + + /* + * Initialize cached registers from their original values. + * we can't share this chip with another i2c master. + */ + error = tca6416_setup_registers(chip); + if (error) + goto fail1; + + if (!chip->use_polling) { + if (pdata->irq_is_gpio) + chip->irqnum = gpio_to_irq(client->irq); + else + chip->irqnum = client->irq; + + error = request_threaded_irq(chip->irqnum, NULL, + tca6416_keys_isr, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "tca6416-keypad", chip); + if (error) { + dev_dbg(&client->dev, + "Unable to claim irq %d; error %d\n", + chip->irqnum, error); + goto fail1; + } + disable_irq(chip->irqnum); + } + + error = input_register_device(input); + if (error) { + dev_dbg(&client->dev, + "Unable to register input device, error: %d\n", error); + goto fail2; + } + + i2c_set_clientdata(client, chip); + device_init_wakeup(&client->dev, 1); + + return 0; + +fail2: + if (!chip->use_polling) { + free_irq(chip->irqnum, chip); + enable_irq(chip->irqnum); + } +fail1: + input_free_device(input); + kfree(chip); + return error; +} + +static int tca6416_keypad_remove(struct i2c_client *client) +{ + struct tca6416_keypad_chip *chip = i2c_get_clientdata(client); + + if (!chip->use_polling) { + free_irq(chip->irqnum, chip); + enable_irq(chip->irqnum); + } + + input_unregister_device(chip->input); + kfree(chip); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tca6416_keypad_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tca6416_keypad_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) + enable_irq_wake(chip->irqnum); + + return 0; +} + +static int tca6416_keypad_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tca6416_keypad_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) + disable_irq_wake(chip->irqnum); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(tca6416_keypad_dev_pm_ops, + tca6416_keypad_suspend, tca6416_keypad_resume); + +static struct i2c_driver tca6416_keypad_driver = { + .driver = { + .name = "tca6416-keypad", + .pm = &tca6416_keypad_dev_pm_ops, + }, + .probe = tca6416_keypad_probe, + .remove = tca6416_keypad_remove, + .id_table = tca6416_id, +}; + +static int __init tca6416_keypad_init(void) +{ + return i2c_add_driver(&tca6416_keypad_driver); +} + +subsys_initcall(tca6416_keypad_init); + +static void __exit tca6416_keypad_exit(void) +{ + i2c_del_driver(&tca6416_keypad_driver); +} +module_exit(tca6416_keypad_exit); + +MODULE_AUTHOR("Sriramakrishnan <srk@ti.com>"); +MODULE_DESCRIPTION("Keypad driver over tca6146 IO expander"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c new file mode 100644 index 000000000..6da607d3b --- /dev/null +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -0,0 +1,393 @@ +/* + * Driver for TCA8418 I2C keyboard + * + * Copyright (C) 2011 Fuel7, Inc. All rights reserved. + * + * Author: Kyle Manna <kyle.manna@fuel7.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * If you can't comply with GPLv2, alternative licensing terms may be + * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary + * alternative licensing inquiries. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/property.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* TCA8418 hardware limits */ +#define TCA8418_MAX_ROWS 8 +#define TCA8418_MAX_COLS 10 + +/* TCA8418 register offsets */ +#define REG_CFG 0x01 +#define REG_INT_STAT 0x02 +#define REG_KEY_LCK_EC 0x03 +#define REG_KEY_EVENT_A 0x04 +#define REG_KEY_EVENT_B 0x05 +#define REG_KEY_EVENT_C 0x06 +#define REG_KEY_EVENT_D 0x07 +#define REG_KEY_EVENT_E 0x08 +#define REG_KEY_EVENT_F 0x09 +#define REG_KEY_EVENT_G 0x0A +#define REG_KEY_EVENT_H 0x0B +#define REG_KEY_EVENT_I 0x0C +#define REG_KEY_EVENT_J 0x0D +#define REG_KP_LCK_TIMER 0x0E +#define REG_UNLOCK1 0x0F +#define REG_UNLOCK2 0x10 +#define REG_GPIO_INT_STAT1 0x11 +#define REG_GPIO_INT_STAT2 0x12 +#define REG_GPIO_INT_STAT3 0x13 +#define REG_GPIO_DAT_STAT1 0x14 +#define REG_GPIO_DAT_STAT2 0x15 +#define REG_GPIO_DAT_STAT3 0x16 +#define REG_GPIO_DAT_OUT1 0x17 +#define REG_GPIO_DAT_OUT2 0x18 +#define REG_GPIO_DAT_OUT3 0x19 +#define REG_GPIO_INT_EN1 0x1A +#define REG_GPIO_INT_EN2 0x1B +#define REG_GPIO_INT_EN3 0x1C +#define REG_KP_GPIO1 0x1D +#define REG_KP_GPIO2 0x1E +#define REG_KP_GPIO3 0x1F +#define REG_GPI_EM1 0x20 +#define REG_GPI_EM2 0x21 +#define REG_GPI_EM3 0x22 +#define REG_GPIO_DIR1 0x23 +#define REG_GPIO_DIR2 0x24 +#define REG_GPIO_DIR3 0x25 +#define REG_GPIO_INT_LVL1 0x26 +#define REG_GPIO_INT_LVL2 0x27 +#define REG_GPIO_INT_LVL3 0x28 +#define REG_DEBOUNCE_DIS1 0x29 +#define REG_DEBOUNCE_DIS2 0x2A +#define REG_DEBOUNCE_DIS3 0x2B +#define REG_GPIO_PULL1 0x2C +#define REG_GPIO_PULL2 0x2D +#define REG_GPIO_PULL3 0x2E + +/* TCA8418 bit definitions */ +#define CFG_AI BIT(7) +#define CFG_GPI_E_CFG BIT(6) +#define CFG_OVR_FLOW_M BIT(5) +#define CFG_INT_CFG BIT(4) +#define CFG_OVR_FLOW_IEN BIT(3) +#define CFG_K_LCK_IEN BIT(2) +#define CFG_GPI_IEN BIT(1) +#define CFG_KE_IEN BIT(0) + +#define INT_STAT_CAD_INT BIT(4) +#define INT_STAT_OVR_FLOW_INT BIT(3) +#define INT_STAT_K_LCK_INT BIT(2) +#define INT_STAT_GPI_INT BIT(1) +#define INT_STAT_K_INT BIT(0) + +/* TCA8418 register masks */ +#define KEY_LCK_EC_KEC 0x7 +#define KEY_EVENT_CODE 0x7f +#define KEY_EVENT_VALUE 0x80 + +struct tca8418_keypad { + struct i2c_client *client; + struct input_dev *input; + + unsigned int row_shift; +}; + +/* + * Write a byte to the TCA8418 + */ +static int tca8418_write_byte(struct tca8418_keypad *keypad_data, + int reg, u8 val) +{ + int error; + + error = i2c_smbus_write_byte_data(keypad_data->client, reg, val); + if (error < 0) { + dev_err(&keypad_data->client->dev, + "%s failed, reg: %d, val: %d, error: %d\n", + __func__, reg, val, error); + return error; + } + + return 0; +} + +/* + * Read a byte from the TCA8418 + */ +static int tca8418_read_byte(struct tca8418_keypad *keypad_data, + int reg, u8 *val) +{ + int error; + + error = i2c_smbus_read_byte_data(keypad_data->client, reg); + if (error < 0) { + dev_err(&keypad_data->client->dev, + "%s failed, reg: %d, error: %d\n", + __func__, reg, error); + return error; + } + + *val = (u8)error; + + return 0; +} + +static void tca8418_read_keypad(struct tca8418_keypad *keypad_data) +{ + struct input_dev *input = keypad_data->input; + unsigned short *keymap = input->keycode; + int error, col, row; + u8 reg, state, code; + + do { + error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, ®); + if (error < 0) { + dev_err(&keypad_data->client->dev, + "unable to read REG_KEY_EVENT_A\n"); + break; + } + + /* Assume that key code 0 signifies empty FIFO */ + if (reg <= 0) + break; + + state = reg & KEY_EVENT_VALUE; + code = reg & KEY_EVENT_CODE; + + row = code / TCA8418_MAX_COLS; + col = code % TCA8418_MAX_COLS; + + row = (col) ? row : row - 1; + col = (col) ? col - 1 : TCA8418_MAX_COLS - 1; + + code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift); + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keymap[code], state); + + } while (1); + + input_sync(input); +} + +/* + * Threaded IRQ handler and this can (and will) sleep. + */ +static irqreturn_t tca8418_irq_handler(int irq, void *dev_id) +{ + struct tca8418_keypad *keypad_data = dev_id; + u8 reg; + int error; + + error = tca8418_read_byte(keypad_data, REG_INT_STAT, ®); + if (error) { + dev_err(&keypad_data->client->dev, + "unable to read REG_INT_STAT\n"); + return IRQ_NONE; + } + + if (!reg) + return IRQ_NONE; + + if (reg & INT_STAT_OVR_FLOW_INT) + dev_warn(&keypad_data->client->dev, "overflow occurred\n"); + + if (reg & INT_STAT_K_INT) + tca8418_read_keypad(keypad_data); + + /* Clear all interrupts, even IRQs we didn't check (GPI, CAD, LCK) */ + reg = 0xff; + error = tca8418_write_byte(keypad_data, REG_INT_STAT, reg); + if (error) + dev_err(&keypad_data->client->dev, + "unable to clear REG_INT_STAT\n"); + + return IRQ_HANDLED; +} + +/* + * Configure the TCA8418 for keypad operation + */ +static int tca8418_configure(struct tca8418_keypad *keypad_data, + u32 rows, u32 cols) +{ + int reg, error = 0; + + /* Assemble a mask for row and column registers */ + reg = ~(~0 << rows); + reg += (~(~0 << cols)) << 8; + + /* Set registers to keypad mode */ + error |= tca8418_write_byte(keypad_data, REG_KP_GPIO1, reg); + error |= tca8418_write_byte(keypad_data, REG_KP_GPIO2, reg >> 8); + error |= tca8418_write_byte(keypad_data, REG_KP_GPIO3, reg >> 16); + + /* Enable column debouncing */ + error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS1, reg); + error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8); + error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16); + + if (error) + return error; + + error = tca8418_write_byte(keypad_data, REG_CFG, + CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN); + + return error; +} + +static int tca8418_keypad_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tca8418_keypad *keypad_data; + struct input_dev *input; + u32 rows = 0, cols = 0; + int error, row_shift, max_keys; + u8 reg; + + /* Check i2c driver capabilities */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) { + dev_err(dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + error = matrix_keypad_parse_properties(dev, &rows, &cols); + if (error) + return error; + + if (!rows || rows > TCA8418_MAX_ROWS) { + dev_err(dev, "invalid rows\n"); + return -EINVAL; + } + + if (!cols || cols > TCA8418_MAX_COLS) { + dev_err(dev, "invalid columns\n"); + return -EINVAL; + } + + row_shift = get_count_order(cols); + max_keys = rows << row_shift; + + /* Allocate memory for keypad_data and input device */ + keypad_data = devm_kzalloc(dev, sizeof(*keypad_data), GFP_KERNEL); + if (!keypad_data) + return -ENOMEM; + + keypad_data->client = client; + keypad_data->row_shift = row_shift; + + /* Read key lock register, if this fails assume device not present */ + error = tca8418_read_byte(keypad_data, REG_KEY_LCK_EC, ®); + if (error) + return -ENODEV; + + /* Configure input device */ + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + keypad_data->input = input; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x001; + input->id.version = 0x0001; + + error = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL, input); + if (error) { + dev_err(dev, "Failed to build keymap\n"); + return error; + } + + if (device_property_read_bool(dev, "keypad,autorepeat")) + __set_bit(EV_REP, input->evbit); + + input_set_capability(input, EV_MSC, MSC_SCAN); + + error = devm_request_threaded_irq(dev, client->irq, + NULL, tca8418_irq_handler, + IRQF_SHARED | IRQF_ONESHOT, + client->name, keypad_data); + if (error) { + dev_err(dev, "Unable to claim irq %d; error %d\n", + client->irq, error); + return error; + } + + /* Initialize the chip */ + error = tca8418_configure(keypad_data, rows, cols); + if (error < 0) + return error; + + error = input_register_device(input); + if (error) { + dev_err(dev, "Unable to register input device, error: %d\n", + error); + return error; + } + + return 0; +} + +static const struct i2c_device_id tca8418_id[] = { + { "tca8418", 8418, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tca8418_id); + +static const struct of_device_id tca8418_dt_ids[] = { + { .compatible = "ti,tca8418", }, + { } +}; +MODULE_DEVICE_TABLE(of, tca8418_dt_ids); + +static struct i2c_driver tca8418_keypad_driver = { + .driver = { + .name = "tca8418_keypad", + .of_match_table = tca8418_dt_ids, + }, + .probe = tca8418_keypad_probe, + .id_table = tca8418_id, +}; + +static int __init tca8418_keypad_init(void) +{ + return i2c_add_driver(&tca8418_keypad_driver); +} +subsys_initcall(tca8418_keypad_init); + +static void __exit tca8418_keypad_exit(void) +{ + i2c_del_driver(&tca8418_keypad_driver); +} +module_exit(tca8418_keypad_exit); + +MODULE_AUTHOR("Kyle Manna <kyle.manna@fuel7.com>"); +MODULE_DESCRIPTION("Keypad driver for TCA8418"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c new file mode 100644 index 000000000..875205f44 --- /dev/null +++ b/drivers/input/keyboard/tegra-kbc.c @@ -0,0 +1,838 @@ +/* + * Keyboard class input driver for the NVIDIA Tegra SoC internal matrix + * keyboard controller + * + * Copyright (c) 2009-2011, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/input/matrix_keypad.h> +#include <linux/reset.h> +#include <linux/err.h> + +#define KBC_MAX_KPENT 8 + +/* Maximum row/column supported by Tegra KBC yet is 16x8 */ +#define KBC_MAX_GPIO 24 +/* Maximum keys supported by Tegra KBC yet is 16 x 8*/ +#define KBC_MAX_KEY (16 * 8) + +#define KBC_MAX_DEBOUNCE_CNT 0x3ffu + +/* KBC row scan time and delay for beginning the row scan. */ +#define KBC_ROW_SCAN_TIME 16 +#define KBC_ROW_SCAN_DLY 5 + +/* KBC uses a 32KHz clock so a cycle = 1/32Khz */ +#define KBC_CYCLE_MS 32 + +/* KBC Registers */ + +/* KBC Control Register */ +#define KBC_CONTROL_0 0x0 +#define KBC_FIFO_TH_CNT_SHIFT(cnt) (cnt << 14) +#define KBC_DEBOUNCE_CNT_SHIFT(cnt) (cnt << 4) +#define KBC_CONTROL_FIFO_CNT_INT_EN (1 << 3) +#define KBC_CONTROL_KEYPRESS_INT_EN (1 << 1) +#define KBC_CONTROL_KBC_EN (1 << 0) + +/* KBC Interrupt Register */ +#define KBC_INT_0 0x4 +#define KBC_INT_FIFO_CNT_INT_STATUS (1 << 2) +#define KBC_INT_KEYPRESS_INT_STATUS (1 << 0) + +#define KBC_ROW_CFG0_0 0x8 +#define KBC_COL_CFG0_0 0x18 +#define KBC_TO_CNT_0 0x24 +#define KBC_INIT_DLY_0 0x28 +#define KBC_RPT_DLY_0 0x2c +#define KBC_KP_ENT0_0 0x30 +#define KBC_KP_ENT1_0 0x34 +#define KBC_ROW0_MASK_0 0x38 + +#define KBC_ROW_SHIFT 3 + +enum tegra_pin_type { + PIN_CFG_IGNORE, + PIN_CFG_COL, + PIN_CFG_ROW, +}; + +/* Tegra KBC hw support */ +struct tegra_kbc_hw_support { + int max_rows; + int max_columns; +}; + +struct tegra_kbc_pin_cfg { + enum tegra_pin_type type; + unsigned char num; +}; + +struct tegra_kbc { + struct device *dev; + unsigned int debounce_cnt; + unsigned int repeat_cnt; + struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; + const struct matrix_keymap_data *keymap_data; + bool wakeup; + void __iomem *mmio; + struct input_dev *idev; + int irq; + spinlock_t lock; + unsigned int repoll_dly; + unsigned long cp_dly_jiffies; + unsigned int cp_to_wkup_dly; + bool use_fn_map; + bool use_ghost_filter; + bool keypress_caused_wake; + unsigned short keycode[KBC_MAX_KEY * 2]; + unsigned short current_keys[KBC_MAX_KPENT]; + unsigned int num_pressed_keys; + u32 wakeup_key; + struct timer_list timer; + struct clk *clk; + struct reset_control *rst; + const struct tegra_kbc_hw_support *hw_support; + int max_keys; + int num_rows_and_columns; +}; + +static void tegra_kbc_report_released_keys(struct input_dev *input, + unsigned short old_keycodes[], + unsigned int old_num_keys, + unsigned short new_keycodes[], + unsigned int new_num_keys) +{ + unsigned int i, j; + + for (i = 0; i < old_num_keys; i++) { + for (j = 0; j < new_num_keys; j++) + if (old_keycodes[i] == new_keycodes[j]) + break; + + if (j == new_num_keys) + input_report_key(input, old_keycodes[i], 0); + } +} + +static void tegra_kbc_report_pressed_keys(struct input_dev *input, + unsigned char scancodes[], + unsigned short keycodes[], + unsigned int num_pressed_keys) +{ + unsigned int i; + + for (i = 0; i < num_pressed_keys; i++) { + input_event(input, EV_MSC, MSC_SCAN, scancodes[i]); + input_report_key(input, keycodes[i], 1); + } +} + +static void tegra_kbc_report_keys(struct tegra_kbc *kbc) +{ + unsigned char scancodes[KBC_MAX_KPENT]; + unsigned short keycodes[KBC_MAX_KPENT]; + u32 val = 0; + unsigned int i; + unsigned int num_down = 0; + bool fn_keypress = false; + bool key_in_same_row = false; + bool key_in_same_col = false; + + for (i = 0; i < KBC_MAX_KPENT; i++) { + if ((i % 4) == 0) + val = readl(kbc->mmio + KBC_KP_ENT0_0 + i); + + if (val & 0x80) { + unsigned int col = val & 0x07; + unsigned int row = (val >> 3) & 0x0f; + unsigned char scancode = + MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT); + + scancodes[num_down] = scancode; + keycodes[num_down] = kbc->keycode[scancode]; + /* If driver uses Fn map, do not report the Fn key. */ + if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map) + fn_keypress = true; + else + num_down++; + } + + val >>= 8; + } + + /* + * Matrix keyboard designs are prone to keyboard ghosting. + * Ghosting occurs if there are 3 keys such that - + * any 2 of the 3 keys share a row, and any 2 of them share a column. + * If so ignore the key presses for this iteration. + */ + if (kbc->use_ghost_filter && num_down >= 3) { + for (i = 0; i < num_down; i++) { + unsigned int j; + u8 curr_col = scancodes[i] & 0x07; + u8 curr_row = scancodes[i] >> KBC_ROW_SHIFT; + + /* + * Find 2 keys such that one key is in the same row + * and the other is in the same column as the i-th key. + */ + for (j = i + 1; j < num_down; j++) { + u8 col = scancodes[j] & 0x07; + u8 row = scancodes[j] >> KBC_ROW_SHIFT; + + if (col == curr_col) + key_in_same_col = true; + if (row == curr_row) + key_in_same_row = true; + } + } + } + + /* + * If the platform uses Fn keymaps, translate keys on a Fn keypress. + * Function keycodes are max_keys apart from the plain keycodes. + */ + if (fn_keypress) { + for (i = 0; i < num_down; i++) { + scancodes[i] += kbc->max_keys; + keycodes[i] = kbc->keycode[scancodes[i]]; + } + } + + /* Ignore the key presses for this iteration? */ + if (key_in_same_col && key_in_same_row) + return; + + tegra_kbc_report_released_keys(kbc->idev, + kbc->current_keys, kbc->num_pressed_keys, + keycodes, num_down); + tegra_kbc_report_pressed_keys(kbc->idev, scancodes, keycodes, num_down); + input_sync(kbc->idev); + + memcpy(kbc->current_keys, keycodes, sizeof(kbc->current_keys)); + kbc->num_pressed_keys = num_down; +} + +static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable) +{ + u32 val; + + val = readl(kbc->mmio + KBC_CONTROL_0); + if (enable) + val |= KBC_CONTROL_FIFO_CNT_INT_EN; + else + val &= ~KBC_CONTROL_FIFO_CNT_INT_EN; + writel(val, kbc->mmio + KBC_CONTROL_0); +} + +static void tegra_kbc_keypress_timer(struct timer_list *t) +{ + struct tegra_kbc *kbc = from_timer(kbc, t, timer); + unsigned long flags; + u32 val; + unsigned int i; + + spin_lock_irqsave(&kbc->lock, flags); + + val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf; + if (val) { + unsigned long dly; + + tegra_kbc_report_keys(kbc); + + /* + * If more than one keys are pressed we need not wait + * for the repoll delay. + */ + dly = (val == 1) ? kbc->repoll_dly : 1; + mod_timer(&kbc->timer, jiffies + msecs_to_jiffies(dly)); + } else { + /* Release any pressed keys and exit the polling loop */ + for (i = 0; i < kbc->num_pressed_keys; i++) + input_report_key(kbc->idev, kbc->current_keys[i], 0); + input_sync(kbc->idev); + + kbc->num_pressed_keys = 0; + + /* All keys are released so enable the keypress interrupt */ + tegra_kbc_set_fifo_interrupt(kbc, true); + } + + spin_unlock_irqrestore(&kbc->lock, flags); +} + +static irqreturn_t tegra_kbc_isr(int irq, void *args) +{ + struct tegra_kbc *kbc = args; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&kbc->lock, flags); + + /* + * Quickly bail out & reenable interrupts if the fifo threshold + * count interrupt wasn't the interrupt source + */ + val = readl(kbc->mmio + KBC_INT_0); + writel(val, kbc->mmio + KBC_INT_0); + + if (val & KBC_INT_FIFO_CNT_INT_STATUS) { + /* + * Until all keys are released, defer further processing to + * the polling loop in tegra_kbc_keypress_timer. + */ + tegra_kbc_set_fifo_interrupt(kbc, false); + mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); + } else if (val & KBC_INT_KEYPRESS_INT_STATUS) { + /* We can be here only through system resume path */ + kbc->keypress_caused_wake = true; + } + + spin_unlock_irqrestore(&kbc->lock, flags); + + return IRQ_HANDLED; +} + +static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter) +{ + int i; + unsigned int rst_val; + + /* Either mask all keys or none. */ + rst_val = (filter && !kbc->wakeup) ? ~0 : 0; + + for (i = 0; i < kbc->hw_support->max_rows; i++) + writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4); +} + +static void tegra_kbc_config_pins(struct tegra_kbc *kbc) +{ + int i; + + for (i = 0; i < KBC_MAX_GPIO; i++) { + u32 r_shft = 5 * (i % 6); + u32 c_shft = 4 * (i % 8); + u32 r_mask = 0x1f << r_shft; + u32 c_mask = 0x0f << c_shft; + u32 r_offs = (i / 6) * 4 + KBC_ROW_CFG0_0; + u32 c_offs = (i / 8) * 4 + KBC_COL_CFG0_0; + u32 row_cfg = readl(kbc->mmio + r_offs); + u32 col_cfg = readl(kbc->mmio + c_offs); + + row_cfg &= ~r_mask; + col_cfg &= ~c_mask; + + switch (kbc->pin_cfg[i].type) { + case PIN_CFG_ROW: + row_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << r_shft; + break; + + case PIN_CFG_COL: + col_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << c_shft; + break; + + case PIN_CFG_IGNORE: + break; + } + + writel(row_cfg, kbc->mmio + r_offs); + writel(col_cfg, kbc->mmio + c_offs); + } +} + +static int tegra_kbc_start(struct tegra_kbc *kbc) +{ + unsigned int debounce_cnt; + u32 val = 0; + int ret; + + ret = clk_prepare_enable(kbc->clk); + if (ret) + return ret; + + /* Reset the KBC controller to clear all previous status.*/ + reset_control_assert(kbc->rst); + udelay(100); + reset_control_deassert(kbc->rst); + udelay(100); + + tegra_kbc_config_pins(kbc); + tegra_kbc_setup_wakekeys(kbc, false); + + writel(kbc->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0); + + /* Keyboard debounce count is maximum of 12 bits. */ + debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); + val = KBC_DEBOUNCE_CNT_SHIFT(debounce_cnt); + val |= KBC_FIFO_TH_CNT_SHIFT(1); /* set fifo interrupt threshold to 1 */ + val |= KBC_CONTROL_FIFO_CNT_INT_EN; /* interrupt on FIFO threshold */ + val |= KBC_CONTROL_KBC_EN; /* enable */ + writel(val, kbc->mmio + KBC_CONTROL_0); + + /* + * Compute the delay(ns) from interrupt mode to continuous polling + * mode so the timer routine is scheduled appropriately. + */ + val = readl(kbc->mmio + KBC_INIT_DLY_0); + kbc->cp_dly_jiffies = usecs_to_jiffies((val & 0xfffff) * 32); + + kbc->num_pressed_keys = 0; + + /* + * Atomically clear out any remaining entries in the key FIFO + * and enable keyboard interrupts. + */ + while (1) { + val = readl(kbc->mmio + KBC_INT_0); + val >>= 4; + if (!val) + break; + + val = readl(kbc->mmio + KBC_KP_ENT0_0); + val = readl(kbc->mmio + KBC_KP_ENT1_0); + } + writel(0x7, kbc->mmio + KBC_INT_0); + + enable_irq(kbc->irq); + + return 0; +} + +static void tegra_kbc_stop(struct tegra_kbc *kbc) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&kbc->lock, flags); + val = readl(kbc->mmio + KBC_CONTROL_0); + val &= ~1; + writel(val, kbc->mmio + KBC_CONTROL_0); + spin_unlock_irqrestore(&kbc->lock, flags); + + disable_irq(kbc->irq); + del_timer_sync(&kbc->timer); + + clk_disable_unprepare(kbc->clk); +} + +static int tegra_kbc_open(struct input_dev *dev) +{ + struct tegra_kbc *kbc = input_get_drvdata(dev); + + return tegra_kbc_start(kbc); +} + +static void tegra_kbc_close(struct input_dev *dev) +{ + struct tegra_kbc *kbc = input_get_drvdata(dev); + + return tegra_kbc_stop(kbc); +} + +static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc, + unsigned int *num_rows) +{ + int i; + + *num_rows = 0; + + for (i = 0; i < KBC_MAX_GPIO; i++) { + const struct tegra_kbc_pin_cfg *pin_cfg = &kbc->pin_cfg[i]; + + switch (pin_cfg->type) { + case PIN_CFG_ROW: + if (pin_cfg->num >= kbc->hw_support->max_rows) { + dev_err(kbc->dev, + "pin_cfg[%d]: invalid row number %d\n", + i, pin_cfg->num); + return false; + } + (*num_rows)++; + break; + + case PIN_CFG_COL: + if (pin_cfg->num >= kbc->hw_support->max_columns) { + dev_err(kbc->dev, + "pin_cfg[%d]: invalid column number %d\n", + i, pin_cfg->num); + return false; + } + break; + + case PIN_CFG_IGNORE: + break; + + default: + dev_err(kbc->dev, + "pin_cfg[%d]: invalid entry type %d\n", + pin_cfg->type, pin_cfg->num); + return false; + } + } + + return true; +} + +static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) +{ + struct device_node *np = kbc->dev->of_node; + u32 prop; + int i; + u32 num_rows = 0; + u32 num_cols = 0; + u32 cols_cfg[KBC_MAX_GPIO]; + u32 rows_cfg[KBC_MAX_GPIO]; + int proplen; + int ret; + + if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop)) + kbc->debounce_cnt = prop; + + if (!of_property_read_u32(np, "nvidia,repeat-delay-ms", &prop)) + kbc->repeat_cnt = prop; + + if (of_find_property(np, "nvidia,needs-ghost-filter", NULL)) + kbc->use_ghost_filter = true; + + if (of_property_read_bool(np, "wakeup-source") || + of_property_read_bool(np, "nvidia,wakeup-source")) /* legacy */ + kbc->wakeup = true; + + if (!of_get_property(np, "nvidia,kbc-row-pins", &proplen)) { + dev_err(kbc->dev, "property nvidia,kbc-row-pins not found\n"); + return -ENOENT; + } + num_rows = proplen / sizeof(u32); + + if (!of_get_property(np, "nvidia,kbc-col-pins", &proplen)) { + dev_err(kbc->dev, "property nvidia,kbc-col-pins not found\n"); + return -ENOENT; + } + num_cols = proplen / sizeof(u32); + + if (num_rows > kbc->hw_support->max_rows) { + dev_err(kbc->dev, + "Number of rows is more than supported by hardware\n"); + return -EINVAL; + } + + if (num_cols > kbc->hw_support->max_columns) { + dev_err(kbc->dev, + "Number of cols is more than supported by hardware\n"); + return -EINVAL; + } + + if (!of_get_property(np, "linux,keymap", &proplen)) { + dev_err(kbc->dev, "property linux,keymap not found\n"); + return -ENOENT; + } + + if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) { + dev_err(kbc->dev, + "keypad rows/columns not properly specified\n"); + return -EINVAL; + } + + /* Set all pins as non-configured */ + for (i = 0; i < kbc->num_rows_and_columns; i++) + kbc->pin_cfg[i].type = PIN_CFG_IGNORE; + + ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins", + rows_cfg, num_rows); + if (ret < 0) { + dev_err(kbc->dev, "Rows configurations are not proper\n"); + return -EINVAL; + } + + ret = of_property_read_u32_array(np, "nvidia,kbc-col-pins", + cols_cfg, num_cols); + if (ret < 0) { + dev_err(kbc->dev, "Cols configurations are not proper\n"); + return -EINVAL; + } + + for (i = 0; i < num_rows; i++) { + kbc->pin_cfg[rows_cfg[i]].type = PIN_CFG_ROW; + kbc->pin_cfg[rows_cfg[i]].num = i; + } + + for (i = 0; i < num_cols; i++) { + kbc->pin_cfg[cols_cfg[i]].type = PIN_CFG_COL; + kbc->pin_cfg[cols_cfg[i]].num = i; + } + + return 0; +} + +static const struct tegra_kbc_hw_support tegra20_kbc_hw_support = { + .max_rows = 16, + .max_columns = 8, +}; + +static const struct tegra_kbc_hw_support tegra11_kbc_hw_support = { + .max_rows = 11, + .max_columns = 8, +}; + +static const struct of_device_id tegra_kbc_of_match[] = { + { .compatible = "nvidia,tegra114-kbc", .data = &tegra11_kbc_hw_support}, + { .compatible = "nvidia,tegra30-kbc", .data = &tegra20_kbc_hw_support}, + { .compatible = "nvidia,tegra20-kbc", .data = &tegra20_kbc_hw_support}, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_kbc_of_match); + +static int tegra_kbc_probe(struct platform_device *pdev) +{ + struct tegra_kbc *kbc; + struct resource *res; + int err; + int num_rows = 0; + unsigned int debounce_cnt; + unsigned int scan_time_rows; + unsigned int keymap_rows; + const struct of_device_id *match; + + match = of_match_device(tegra_kbc_of_match, &pdev->dev); + + kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL); + if (!kbc) { + dev_err(&pdev->dev, "failed to alloc memory for kbc\n"); + return -ENOMEM; + } + + kbc->dev = &pdev->dev; + kbc->hw_support = match->data; + kbc->max_keys = kbc->hw_support->max_rows * + kbc->hw_support->max_columns; + kbc->num_rows_and_columns = kbc->hw_support->max_rows + + kbc->hw_support->max_columns; + keymap_rows = kbc->max_keys; + spin_lock_init(&kbc->lock); + + err = tegra_kbc_parse_dt(kbc); + if (err) + return err; + + if (!tegra_kbc_check_pin_cfg(kbc, &num_rows)) + return -EINVAL; + + kbc->irq = platform_get_irq(pdev, 0); + if (kbc->irq < 0) { + dev_err(&pdev->dev, "failed to get keyboard IRQ\n"); + return -ENXIO; + } + + kbc->idev = devm_input_allocate_device(&pdev->dev); + if (!kbc->idev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + timer_setup(&kbc->timer, tegra_kbc_keypress_timer, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kbc->mmio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kbc->mmio)) + return PTR_ERR(kbc->mmio); + + kbc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(kbc->clk)) { + dev_err(&pdev->dev, "failed to get keyboard clock\n"); + return PTR_ERR(kbc->clk); + } + + kbc->rst = devm_reset_control_get(&pdev->dev, "kbc"); + if (IS_ERR(kbc->rst)) { + dev_err(&pdev->dev, "failed to get keyboard reset\n"); + return PTR_ERR(kbc->rst); + } + + /* + * The time delay between two consecutive reads of the FIFO is + * the sum of the repeat time and the time taken for scanning + * the rows. There is an additional delay before the row scanning + * starts. The repoll delay is computed in milliseconds. + */ + debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); + scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows; + kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + kbc->repeat_cnt; + kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS); + + kbc->idev->name = pdev->name; + kbc->idev->id.bustype = BUS_HOST; + kbc->idev->dev.parent = &pdev->dev; + kbc->idev->open = tegra_kbc_open; + kbc->idev->close = tegra_kbc_close; + + if (kbc->keymap_data && kbc->use_fn_map) + keymap_rows *= 2; + + err = matrix_keypad_build_keymap(kbc->keymap_data, NULL, + keymap_rows, + kbc->hw_support->max_columns, + kbc->keycode, kbc->idev); + if (err) { + dev_err(&pdev->dev, "failed to setup keymap\n"); + return err; + } + + __set_bit(EV_REP, kbc->idev->evbit); + input_set_capability(kbc->idev, EV_MSC, MSC_SCAN); + + input_set_drvdata(kbc->idev, kbc); + + err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr, + IRQF_TRIGGER_HIGH, pdev->name, kbc); + if (err) { + dev_err(&pdev->dev, "failed to request keyboard IRQ\n"); + return err; + } + + disable_irq(kbc->irq); + + err = input_register_device(kbc->idev); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + return err; + } + + platform_set_drvdata(pdev, kbc); + device_init_wakeup(&pdev->dev, kbc->wakeup); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable) +{ + u32 val; + + val = readl(kbc->mmio + KBC_CONTROL_0); + if (enable) + val |= KBC_CONTROL_KEYPRESS_INT_EN; + else + val &= ~KBC_CONTROL_KEYPRESS_INT_EN; + writel(val, kbc->mmio + KBC_CONTROL_0); +} + +static int tegra_kbc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tegra_kbc *kbc = platform_get_drvdata(pdev); + + mutex_lock(&kbc->idev->mutex); + if (device_may_wakeup(&pdev->dev)) { + disable_irq(kbc->irq); + del_timer_sync(&kbc->timer); + tegra_kbc_set_fifo_interrupt(kbc, false); + + /* Forcefully clear the interrupt status */ + writel(0x7, kbc->mmio + KBC_INT_0); + /* + * Store the previous resident time of continuous polling mode. + * Force the keyboard into interrupt mode. + */ + kbc->cp_to_wkup_dly = readl(kbc->mmio + KBC_TO_CNT_0); + writel(0, kbc->mmio + KBC_TO_CNT_0); + + tegra_kbc_setup_wakekeys(kbc, true); + msleep(30); + + kbc->keypress_caused_wake = false; + /* Enable keypress interrupt before going into suspend. */ + tegra_kbc_set_keypress_interrupt(kbc, true); + enable_irq(kbc->irq); + enable_irq_wake(kbc->irq); + } else { + if (kbc->idev->users) + tegra_kbc_stop(kbc); + } + mutex_unlock(&kbc->idev->mutex); + + return 0; +} + +static int tegra_kbc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tegra_kbc *kbc = platform_get_drvdata(pdev); + int err = 0; + + mutex_lock(&kbc->idev->mutex); + if (device_may_wakeup(&pdev->dev)) { + disable_irq_wake(kbc->irq); + tegra_kbc_setup_wakekeys(kbc, false); + /* We will use fifo interrupts for key detection. */ + tegra_kbc_set_keypress_interrupt(kbc, false); + + /* Restore the resident time of continuous polling mode. */ + writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0); + + tegra_kbc_set_fifo_interrupt(kbc, true); + + if (kbc->keypress_caused_wake && kbc->wakeup_key) { + /* + * We can't report events directly from the ISR + * because timekeeping is stopped when processing + * wakeup request and we get a nasty warning when + * we try to call do_gettimeofday() in evdev + * handler. + */ + input_report_key(kbc->idev, kbc->wakeup_key, 1); + input_sync(kbc->idev); + input_report_key(kbc->idev, kbc->wakeup_key, 0); + input_sync(kbc->idev); + } + } else { + if (kbc->idev->users) + err = tegra_kbc_start(kbc); + } + mutex_unlock(&kbc->idev->mutex); + + return err; +} +#endif + +static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume); + +static struct platform_driver tegra_kbc_driver = { + .probe = tegra_kbc_probe, + .driver = { + .name = "tegra-kbc", + .pm = &tegra_kbc_pm_ops, + .of_match_table = tegra_kbc_of_match, + }, +}; +module_platform_driver(tegra_kbc_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Rakesh Iyer <riyer@nvidia.com>"); +MODULE_DESCRIPTION("Tegra matrix keyboard controller driver"); +MODULE_ALIAS("platform:tegra-kbc"); diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c new file mode 100644 index 000000000..abc266e40 --- /dev/null +++ b/drivers/input/keyboard/tm2-touchkey.c @@ -0,0 +1,284 @@ +/* + * TM2 touchkey device driver + * + * Copyright 2005 Phil Blundell + * Copyright 2016 Samsung Electronics Co., Ltd. + * + * Author: Beomho Seo <beomho.seo@samsung.com> + * Author: Jaechul Lee <jcsing.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/regulator/consumer.h> + +#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" +#define TM2_TOUCHKEY_KEYCODE_REG 0x03 +#define TM2_TOUCHKEY_BASE_REG 0x00 +#define TM2_TOUCHKEY_CMD_LED_ON 0x10 +#define TM2_TOUCHKEY_CMD_LED_OFF 0x20 +#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) +#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 + +enum { + TM2_TOUCHKEY_KEY_MENU = 0x1, + TM2_TOUCHKEY_KEY_BACK, +}; + +struct tm2_touchkey_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct led_classdev led_dev; + struct regulator *vdd; + struct regulator_bulk_data regulators[2]; +}; + +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct tm2_touchkey_data *touchkey = + container_of(led_dev, struct tm2_touchkey_data, led_dev); + u32 volt; + u8 data; + + if (brightness == LED_OFF) { + volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; + data = TM2_TOUCHKEY_CMD_LED_OFF; + } else { + volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; + data = TM2_TOUCHKEY_CMD_LED_ON; + } + + regulator_set_voltage(touchkey->vdd, volt, volt); + i2c_smbus_write_byte_data(touchkey->client, + TM2_TOUCHKEY_BASE_REG, data); +} + +static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey) +{ + int error; + + error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators), + touchkey->regulators); + if (error) + return error; + + /* waiting for device initialization, at least 150ms */ + msleep(150); + + return 0; +} + +static void tm2_touchkey_power_disable(void *data) +{ + struct tm2_touchkey_data *touchkey = data; + + regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators), + touchkey->regulators); +} + +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) +{ + struct tm2_touchkey_data *touchkey = devid; + int data; + int key; + + data = i2c_smbus_read_byte_data(touchkey->client, + TM2_TOUCHKEY_KEYCODE_REG); + if (data < 0) { + dev_err(&touchkey->client->dev, + "failed to read i2c data: %d\n", data); + goto out; + } + + switch (data & TM2_TOUCHKEY_BIT_KEYCODE) { + case TM2_TOUCHKEY_KEY_MENU: + key = KEY_PHONE; + break; + + case TM2_TOUCHKEY_KEY_BACK: + key = KEY_BACK; + break; + + default: + dev_warn(&touchkey->client->dev, + "unhandled keycode, data %#02x\n", data); + goto out; + } + + if (data & TM2_TOUCHKEY_BIT_PRESS_EV) { + input_report_key(touchkey->input_dev, KEY_PHONE, 0); + input_report_key(touchkey->input_dev, KEY_BACK, 0); + } else { + input_report_key(touchkey->input_dev, key, 1); + } + + input_sync(touchkey->input_dev); + +out: + return IRQ_HANDLED; +} + +static int tm2_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tm2_touchkey_data *touchkey; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "incompatible I2C adapter\n"); + return -EIO; + } + + touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL); + if (!touchkey) + return -ENOMEM; + + touchkey->client = client; + i2c_set_clientdata(client, touchkey); + + touchkey->regulators[0].supply = "vcc"; + touchkey->regulators[1].supply = "vdd"; + error = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(touchkey->regulators), + touchkey->regulators); + if (error) { + dev_err(&client->dev, "failed to get regulators: %d\n", error); + return error; + } + + /* Save VDD for easy access */ + touchkey->vdd = touchkey->regulators[1].consumer; + + error = tm2_touchkey_power_enable(touchkey); + if (error) { + dev_err(&client->dev, "failed to power up device: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(&client->dev, + tm2_touchkey_power_disable, touchkey); + if (error) { + dev_err(&client->dev, + "failed to install poweroff handler: %d\n", error); + return error; + } + + /* input device */ + touchkey->input_dev = devm_input_allocate_device(&client->dev); + if (!touchkey->input_dev) { + dev_err(&client->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; + touchkey->input_dev->id.bustype = BUS_I2C; + + input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE); + input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK); + + error = input_register_device(touchkey->input_dev); + if (error) { + dev_err(&client->dev, + "failed to register input device: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, tm2_touchkey_irq_handler, + IRQF_ONESHOT, + TM2_TOUCHKEY_DEV_NAME, touchkey); + if (error) { + dev_err(&client->dev, + "failed to request threaded irq: %d\n", error); + return error; + } + + /* led device */ + touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; + touchkey->led_dev.brightness = LED_FULL; + touchkey->led_dev.max_brightness = LED_ON; + touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set; + + error = devm_led_classdev_register(&client->dev, &touchkey->led_dev); + if (error) { + dev_err(&client->dev, + "failed to register touchkey led: %d\n", error); + return error; + } + + return 0; +} + +static int __maybe_unused tm2_touchkey_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client); + + disable_irq(client->irq); + tm2_touchkey_power_disable(touchkey); + + return 0; +} + +static int __maybe_unused tm2_touchkey_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client); + int ret; + + enable_irq(client->irq); + + ret = tm2_touchkey_power_enable(touchkey); + if (ret) + dev_err(dev, "failed to enable power: %d\n", ret); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, + tm2_touchkey_suspend, tm2_touchkey_resume); + +static const struct i2c_device_id tm2_touchkey_id_table[] = { + { TM2_TOUCHKEY_DEV_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table); + +static const struct of_device_id tm2_touchkey_of_match[] = { + { .compatible = "cypress,tm2-touchkey", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match); + +static struct i2c_driver tm2_touchkey_driver = { + .driver = { + .name = TM2_TOUCHKEY_DEV_NAME, + .pm = &tm2_touchkey_pm_ops, + .of_match_table = of_match_ptr(tm2_touchkey_of_match), + }, + .probe = tm2_touchkey_probe, + .id_table = tm2_touchkey_id_table, +}; +module_i2c_driver(tm2_touchkey_driver); + +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); +MODULE_DESCRIPTION("Samsung touchkey driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c new file mode 100644 index 000000000..8677dbe0f --- /dev/null +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -0,0 +1,471 @@ +/* + * twl4030_keypad.c - driver for 8x8 keypad controller in twl4030 chips + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Code re-written for 2430SDP by: + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Initial Code: + * Manjunatha G K <manjugk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/mfd/twl.h> +#include <linux/slab.h> +#include <linux/of.h> + +/* + * The TWL4030 family chips include a keypad controller that supports + * up to an 8x8 switch matrix. The controller can issue system wakeup + * events, since it uses only the always-on 32KiHz oscillator, and has + * an internal state machine that decodes pressed keys, including + * multi-key combinations. + * + * This driver lets boards define what keycodes they wish to report for + * which scancodes, as part of the "struct twl4030_keypad_data" used in + * the probe() routine. + * + * See the TPS65950 documentation; that's the general availability + * version of the TWL5030 second generation part. + */ +#define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */ +#define TWL4030_MAX_COLS 8 +/* + * Note that we add space for an extra column so that we can handle + * row lines connected to the gnd (see twl4030_col_xlate()). + */ +#define TWL4030_ROW_SHIFT 4 +#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT) + +struct twl4030_keypad { + unsigned short keymap[TWL4030_KEYMAP_SIZE]; + u16 kp_state[TWL4030_MAX_ROWS]; + bool autorepeat; + unsigned int n_rows; + unsigned int n_cols; + int irq; + + struct device *dbg_dev; + struct input_dev *input; +}; + +/*----------------------------------------------------------------------*/ + +/* arbitrary prescaler value 0..7 */ +#define PTV_PRESCALER 4 + +/* Register Offsets */ +#define KEYP_CTRL 0x00 +#define KEYP_DEB 0x01 +#define KEYP_LONG_KEY 0x02 +#define KEYP_LK_PTV 0x03 +#define KEYP_TIMEOUT_L 0x04 +#define KEYP_TIMEOUT_H 0x05 +#define KEYP_KBC 0x06 +#define KEYP_KBR 0x07 +#define KEYP_SMS 0x08 +#define KEYP_FULL_CODE_7_0 0x09 /* row 0 column status */ +#define KEYP_FULL_CODE_15_8 0x0a /* ... row 1 ... */ +#define KEYP_FULL_CODE_23_16 0x0b +#define KEYP_FULL_CODE_31_24 0x0c +#define KEYP_FULL_CODE_39_32 0x0d +#define KEYP_FULL_CODE_47_40 0x0e +#define KEYP_FULL_CODE_55_48 0x0f +#define KEYP_FULL_CODE_63_56 0x10 +#define KEYP_ISR1 0x11 +#define KEYP_IMR1 0x12 +#define KEYP_ISR2 0x13 +#define KEYP_IMR2 0x14 +#define KEYP_SIR 0x15 +#define KEYP_EDR 0x16 /* edge triggers */ +#define KEYP_SIH_CTRL 0x17 + +/* KEYP_CTRL_REG Fields */ +#define KEYP_CTRL_SOFT_NRST BIT(0) +#define KEYP_CTRL_SOFTMODEN BIT(1) +#define KEYP_CTRL_LK_EN BIT(2) +#define KEYP_CTRL_TOE_EN BIT(3) +#define KEYP_CTRL_TOLE_EN BIT(4) +#define KEYP_CTRL_RP_EN BIT(5) +#define KEYP_CTRL_KBD_ON BIT(6) + +/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/ +#define KEYP_PERIOD_US(t, prescale) ((t) / (31 << ((prescale) + 1)) - 1) + +/* KEYP_LK_PTV_REG Fields */ +#define KEYP_LK_PTV_PTV_SHIFT 5 + +/* KEYP_{IMR,ISR,SIR} Fields */ +#define KEYP_IMR1_MIS BIT(3) +#define KEYP_IMR1_TO BIT(2) +#define KEYP_IMR1_LK BIT(1) +#define KEYP_IMR1_KP BIT(0) + +/* KEYP_EDR Fields */ +#define KEYP_EDR_KP_FALLING 0x01 +#define KEYP_EDR_KP_RISING 0x02 +#define KEYP_EDR_KP_BOTH 0x03 +#define KEYP_EDR_LK_FALLING 0x04 +#define KEYP_EDR_LK_RISING 0x08 +#define KEYP_EDR_TO_FALLING 0x10 +#define KEYP_EDR_TO_RISING 0x20 +#define KEYP_EDR_MIS_FALLING 0x40 +#define KEYP_EDR_MIS_RISING 0x80 + + +/*----------------------------------------------------------------------*/ + +static int twl4030_kpread(struct twl4030_keypad *kp, + u8 *data, u32 reg, u8 num_bytes) +{ + int ret = twl_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes); + + if (ret < 0) + dev_warn(kp->dbg_dev, + "Couldn't read TWL4030: %X - ret %d[%x]\n", + reg, ret, ret); + + return ret; +} + +static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg) +{ + int ret = twl_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg); + + if (ret < 0) + dev_warn(kp->dbg_dev, + "Could not write TWL4030: %X - ret %d[%x]\n", + reg, ret, ret); + + return ret; +} + +static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col) +{ + /* + * If all bits in a row are active for all columns then + * we have that row line connected to gnd. Mark this + * key on as if it was on matrix position n_cols (i.e. + * one higher than the size of the matrix). + */ + if (col == 0xFF) + return 1 << kp->n_cols; + else + return col & ((1 << kp->n_cols) - 1); +} + +static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state) +{ + u8 new_state[TWL4030_MAX_ROWS]; + int row; + int ret = twl4030_kpread(kp, new_state, + KEYP_FULL_CODE_7_0, kp->n_rows); + if (ret >= 0) + for (row = 0; row < kp->n_rows; row++) + state[row] = twl4030_col_xlate(kp, new_state[row]); + + return ret; +} + +static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) +{ + int i; + u16 check = 0; + + for (i = 0; i < kp->n_rows; i++) { + u16 col = key_state[i]; + + if ((col & check) && hweight16(col) > 1) + return true; + + check |= col; + } + + return false; +} + +static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all) +{ + struct input_dev *input = kp->input; + u16 new_state[TWL4030_MAX_ROWS]; + int col, row; + + if (release_all) { + memset(new_state, 0, sizeof(new_state)); + } else { + /* check for any changes */ + int ret = twl4030_read_kp_matrix_state(kp, new_state); + + if (ret < 0) /* panic ... */ + return; + + if (twl4030_is_in_ghost_state(kp, new_state)) + return; + } + + /* check for changes and print those */ + for (row = 0; row < kp->n_rows; row++) { + int changed = new_state[row] ^ kp->kp_state[row]; + + if (!changed) + continue; + + /* Extra column handles "all gnd" rows */ + for (col = 0; col < kp->n_cols + 1; col++) { + int code; + + if (!(changed & (1 << col))) + continue; + + dev_dbg(kp->dbg_dev, "key [%d:%d] %s\n", row, col, + (new_state[row] & (1 << col)) ? + "press" : "release"); + + code = MATRIX_SCAN_CODE(row, col, TWL4030_ROW_SHIFT); + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, kp->keymap[code], + new_state[row] & (1 << col)); + } + kp->kp_state[row] = new_state[row]; + } + input_sync(input); +} + +/* + * Keypad interrupt handler + */ +static irqreturn_t do_kp_irq(int irq, void *_kp) +{ + struct twl4030_keypad *kp = _kp; + u8 reg; + int ret; + + /* Read & Clear TWL4030 pending interrupt */ + ret = twl4030_kpread(kp, ®, KEYP_ISR1, 1); + + /* + * Release all keys if I2C has gone bad or + * the KEYP has gone to idle state. + */ + if (ret >= 0 && (reg & KEYP_IMR1_KP)) + twl4030_kp_scan(kp, false); + else + twl4030_kp_scan(kp, true); + + return IRQ_HANDLED; +} + +static int twl4030_kp_program(struct twl4030_keypad *kp) +{ + u8 reg; + int i; + + /* Enable controller, with hardware decoding but not autorepeat */ + reg = KEYP_CTRL_SOFT_NRST | KEYP_CTRL_SOFTMODEN + | KEYP_CTRL_TOE_EN | KEYP_CTRL_KBD_ON; + if (twl4030_kpwrite_u8(kp, reg, KEYP_CTRL) < 0) + return -EIO; + + /* + * NOTE: we could use sih_setup() here to package keypad + * event sources as four different IRQs ... but we don't. + */ + + /* Enable TO rising and KP rising and falling edge detection */ + reg = KEYP_EDR_KP_BOTH | KEYP_EDR_TO_RISING; + if (twl4030_kpwrite_u8(kp, reg, KEYP_EDR) < 0) + return -EIO; + + /* Set PTV prescaler Field */ + reg = (PTV_PRESCALER << KEYP_LK_PTV_PTV_SHIFT); + if (twl4030_kpwrite_u8(kp, reg, KEYP_LK_PTV) < 0) + return -EIO; + + /* Set key debounce time to 20 ms */ + i = KEYP_PERIOD_US(20000, PTV_PRESCALER); + if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0) + return -EIO; + + /* Set timeout period to 200 ms */ + i = KEYP_PERIOD_US(200000, PTV_PRESCALER); + if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0) + return -EIO; + + if (twl4030_kpwrite_u8(kp, (i >> 8), KEYP_TIMEOUT_H) < 0) + return -EIO; + + /* + * Enable Clear-on-Read; disable remembering events that fire + * after the IRQ but before our handler acks (reads) them. + */ + reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK; + if (twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL) < 0) + return -EIO; + + /* initialize key state; irqs update it from here on */ + if (twl4030_read_kp_matrix_state(kp, kp->kp_state) < 0) + return -EIO; + + return 0; +} + +/* + * Registers keypad device with input subsystem + * and configures TWL4030 keypad registers + */ +static int twl4030_kp_probe(struct platform_device *pdev) +{ + struct twl4030_keypad_data *pdata = dev_get_platdata(&pdev->dev); + const struct matrix_keymap_data *keymap_data = NULL; + struct twl4030_keypad *kp; + struct input_dev *input; + u8 reg; + int error; + + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); + if (!kp) + return -ENOMEM; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) + return -ENOMEM; + + /* get the debug device */ + kp->dbg_dev = &pdev->dev; + kp->input = input; + + /* setup input device */ + input->name = "TWL4030 Keypad"; + input->phys = "twl4030_keypad/input0"; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0003; + + if (pdata) { + if (!pdata->rows || !pdata->cols || !pdata->keymap_data) { + dev_err(&pdev->dev, "Missing platform_data\n"); + return -EINVAL; + } + + kp->n_rows = pdata->rows; + kp->n_cols = pdata->cols; + kp->autorepeat = pdata->rep; + keymap_data = pdata->keymap_data; + } else { + error = matrix_keypad_parse_properties(&pdev->dev, &kp->n_rows, + &kp->n_cols); + if (error) + return error; + + kp->autorepeat = true; + } + + if (kp->n_rows > TWL4030_MAX_ROWS || kp->n_cols > TWL4030_MAX_COLS) { + dev_err(&pdev->dev, + "Invalid rows/cols amount specified in platform/devicetree data\n"); + return -EINVAL; + } + + kp->irq = platform_get_irq(pdev, 0); + if (kp->irq < 0) + return kp->irq; + + error = matrix_keypad_build_keymap(keymap_data, NULL, + TWL4030_MAX_ROWS, + 1 << TWL4030_ROW_SHIFT, + kp->keymap, input); + if (error) { + dev_err(kp->dbg_dev, "Failed to build keymap\n"); + return error; + } + + input_set_capability(input, EV_MSC, MSC_SCAN); + /* Enable auto repeat feature of Linux input subsystem */ + if (kp->autorepeat) + __set_bit(EV_REP, input->evbit); + + error = input_register_device(input); + if (error) { + dev_err(kp->dbg_dev, + "Unable to register twl4030 keypad device\n"); + return error; + } + + error = twl4030_kp_program(kp); + if (error) + return error; + + /* + * This ISR will always execute in kernel thread context because of + * the need to access the TWL4030 over the I2C bus. + * + * NOTE: we assume this host is wired to TWL4040 INT1, not INT2 ... + */ + error = devm_request_threaded_irq(&pdev->dev, kp->irq, NULL, do_kp_irq, + 0, pdev->name, kp); + if (error) { + dev_info(kp->dbg_dev, "request_irq failed for irq no=%d: %d\n", + kp->irq, error); + return error; + } + + /* Enable KP and TO interrupts now. */ + reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO); + if (twl4030_kpwrite_u8(kp, reg, KEYP_IMR1)) { + /* mask all events - we don't care about the result */ + (void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1); + return -EIO; + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id twl4030_keypad_dt_match_table[] = { + { .compatible = "ti,twl4030-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, twl4030_keypad_dt_match_table); +#endif + +/* + * NOTE: twl4030 are multi-function devices connected via I2C. + * So this device is a child of an I2C parent, thus it needs to + * support unplug/replug (which most platform devices don't). + */ + +static struct platform_driver twl4030_kp_driver = { + .probe = twl4030_kp_probe, + .driver = { + .name = "twl4030_keypad", + .of_match_table = of_match_ptr(twl4030_keypad_dt_match_table), + }, +}; +module_platform_driver(twl4030_kp_driver); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TWL4030 Keypad Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl4030_keypad"); diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c new file mode 100644 index 000000000..a1ff69c53 --- /dev/null +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -0,0 +1,268 @@ +/* + * Copyright (c) 2008-2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <linux/platform_data/keypad-w90p910.h> + +/* Keypad Interface Control Registers */ +#define KPI_CONF 0x00 +#define KPI_3KCONF 0x04 +#define KPI_LPCONF 0x08 +#define KPI_STATUS 0x0C + +#define IS1KEY (0x01 << 16) +#define INTTR (0x01 << 21) +#define KEY0R (0x0f << 3) +#define KEY0C 0x07 +#define DEBOUNCE_BIT 0x08 +#define KSIZE0 (0x01 << 16) +#define KSIZE1 (0x01 << 17) +#define KPSEL (0x01 << 19) +#define ENKP (0x01 << 18) + +#define KGET_RAW(n) (((n) & KEY0R) >> 3) +#define KGET_COLUMN(n) ((n) & KEY0C) + +#define W90P910_NUM_ROWS 8 +#define W90P910_NUM_COLS 8 +#define W90P910_ROW_SHIFT 3 + +struct w90p910_keypad { + const struct w90p910_keypad_platform_data *pdata; + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + int irq; + unsigned short keymap[W90P910_NUM_ROWS * W90P910_NUM_COLS]; +}; + +static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad, + unsigned int status) +{ + struct input_dev *input_dev = keypad->input_dev; + unsigned int row = KGET_RAW(status); + unsigned int col = KGET_COLUMN(status); + unsigned int code = MATRIX_SCAN_CODE(row, col, W90P910_ROW_SHIFT); + unsigned int key = keypad->keymap[code]; + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, key, 1); + input_sync(input_dev); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, key, 0); + input_sync(input_dev); +} + +static irqreturn_t w90p910_keypad_irq_handler(int irq, void *dev_id) +{ + struct w90p910_keypad *keypad = dev_id; + unsigned int kstatus, val; + + kstatus = __raw_readl(keypad->mmio_base + KPI_STATUS); + + val = INTTR | IS1KEY; + + if (kstatus & val) + w90p910_keypad_scan_matrix(keypad, kstatus); + + return IRQ_HANDLED; +} + +static int w90p910_keypad_open(struct input_dev *dev) +{ + struct w90p910_keypad *keypad = input_get_drvdata(dev); + const struct w90p910_keypad_platform_data *pdata = keypad->pdata; + unsigned int val, config; + + /* Enable unit clock */ + clk_enable(keypad->clk); + + val = __raw_readl(keypad->mmio_base + KPI_CONF); + val |= (KPSEL | ENKP); + val &= ~(KSIZE0 | KSIZE1); + + config = pdata->prescale | (pdata->debounce << DEBOUNCE_BIT); + + val |= config; + + __raw_writel(val, keypad->mmio_base + KPI_CONF); + + return 0; +} + +static void w90p910_keypad_close(struct input_dev *dev) +{ + struct w90p910_keypad *keypad = input_get_drvdata(dev); + + /* Disable clock unit */ + clk_disable(keypad->clk); +} + +static int w90p910_keypad_probe(struct platform_device *pdev) +{ + const struct w90p910_keypad_platform_data *pdata = + dev_get_platdata(&pdev->dev); + const struct matrix_keymap_data *keymap_data; + struct w90p910_keypad *keypad; + struct input_dev *input_dev; + struct resource *res; + int irq; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + return -ENXIO; + } + + keypad = kzalloc(sizeof(struct w90p910_keypad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + error = -ENOMEM; + goto failed_free; + } + + keypad->pdata = pdata; + keypad->input_dev = input_dev; + keypad->irq = irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + error = -ENXIO; + goto failed_free; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto failed_free; + } + + keypad->mmio_base = ioremap(res->start, resource_size(res)); + if (keypad->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto failed_free_res; + } + + keypad->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + error = PTR_ERR(keypad->clk); + goto failed_free_io; + } + + /* set multi-function pin for w90p910 kpi. */ + mfp_set_groupi(&pdev->dev); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = w90p910_keypad_open; + input_dev->close = w90p910_keypad_close; + input_dev->dev.parent = &pdev->dev; + + error = matrix_keypad_build_keymap(keymap_data, NULL, + W90P910_NUM_ROWS, W90P910_NUM_COLS, + keypad->keymap, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto failed_put_clk; + } + + error = request_irq(keypad->irq, w90p910_keypad_irq_handler, + 0, pdev->name, keypad); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto failed_put_clk; + } + + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + platform_set_drvdata(pdev, keypad); + return 0; + +failed_free_irq: + free_irq(irq, keypad); +failed_put_clk: + clk_put(keypad->clk); +failed_free_io: + iounmap(keypad->mmio_base); +failed_free_res: + release_mem_region(res->start, resource_size(res)); +failed_free: + input_free_device(input_dev); + kfree(keypad); + return error; +} + +static int w90p910_keypad_remove(struct platform_device *pdev) +{ + struct w90p910_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(keypad->irq, keypad); + + clk_put(keypad->clk); + + input_unregister_device(keypad->input_dev); + + iounmap(keypad->mmio_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(keypad); + + return 0; +} + +static struct platform_driver w90p910_keypad_driver = { + .probe = w90p910_keypad_probe, + .remove = w90p910_keypad_remove, + .driver = { + .name = "nuc900-kpi", + }, +}; +module_platform_driver(w90p910_keypad_driver); + +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); +MODULE_DESCRIPTION("w90p910 keypad driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:nuc900-keypad"); diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c new file mode 100644 index 000000000..f7598114b --- /dev/null +++ b/drivers/input/keyboard/xtkbd.c @@ -0,0 +1,167 @@ +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + */ + +/* + * XT keyboard driver for Linux + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "XT keyboard driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define XTKBD_EMUL0 0xe0 +#define XTKBD_EMUL1 0xe1 +#define XTKBD_KEY 0x7f +#define XTKBD_RELEASE 0x80 + +static unsigned char xtkbd_keycode[256] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 0, 0, 0, 87, 88, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 87, 88, 0, 0, 0, 0,110,111,103,108,105, + 106 +}; + +struct xtkbd { + unsigned char keycode[256]; + struct input_dev *dev; + struct serio *serio; + char phys[32]; +}; + +static irqreturn_t xtkbd_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct xtkbd *xtkbd = serio_get_drvdata(serio); + + switch (data) { + case XTKBD_EMUL0: + case XTKBD_EMUL1: + break; + default: + + if (xtkbd->keycode[data & XTKBD_KEY]) { + input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE)); + input_sync(xtkbd->dev); + } else { + printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n", + data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed"); + } + } + return IRQ_HANDLED; +} + +static int xtkbd_connect(struct serio *serio, struct serio_driver *drv) +{ + struct xtkbd *xtkbd; + struct input_dev *input_dev; + int err = -ENOMEM; + int i; + + xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xtkbd || !input_dev) + goto fail1; + + xtkbd->serio = serio; + xtkbd->dev = input_dev; + snprintf(xtkbd->phys, sizeof(xtkbd->phys), "%s/input0", serio->phys); + memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode)); + + input_dev->name = "XT Keyboard"; + input_dev->phys = xtkbd->phys; + input_dev->id.bustype = BUS_XTKBD; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycode = xtkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(xtkbd_keycode); + + for (i = 0; i < 255; i++) + set_bit(xtkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + + serio_set_drvdata(serio, xtkbd); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(xtkbd->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(xtkbd); + return err; +} + +static void xtkbd_disconnect(struct serio *serio) +{ + struct xtkbd *xtkbd = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(xtkbd->dev); + kfree(xtkbd); +} + +static const struct serio_device_id xtkbd_serio_ids[] = { + { + .type = SERIO_XT, + .proto = SERIO_ANY, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, xtkbd_serio_ids); + +static struct serio_driver xtkbd_drv = { + .driver = { + .name = "xtkbd", + }, + .description = DRIVER_DESC, + .id_table = xtkbd_serio_ids, + .interrupt = xtkbd_interrupt, + .connect = xtkbd_connect, + .disconnect = xtkbd_disconnect, +}; + +module_serio_driver(xtkbd_drv); |