summaryrefslogtreecommitdiffstats
path: root/drivers/ipack
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ipack')
-rw-r--r--drivers/ipack/Kconfig24
-rw-r--r--drivers/ipack/Makefile6
-rw-r--r--drivers/ipack/carriers/Kconfig7
-rw-r--r--drivers/ipack/carriers/Makefile1
-rw-r--r--drivers/ipack/carriers/tpci200.c655
-rw-r--r--drivers/ipack/carriers/tpci200.h167
-rw-r--r--drivers/ipack/devices/Kconfig6
-rw-r--r--drivers/ipack/devices/Makefile1
-rw-r--r--drivers/ipack/devices/ipoctal.c782
-rw-r--r--drivers/ipack/devices/ipoctal.h42
-rw-r--r--drivers/ipack/devices/scc2698.h228
-rw-r--r--drivers/ipack/ipack.c506
12 files changed, 2425 insertions, 0 deletions
diff --git a/drivers/ipack/Kconfig b/drivers/ipack/Kconfig
new file mode 100644
index 000000000..3949e5589
--- /dev/null
+++ b/drivers/ipack/Kconfig
@@ -0,0 +1,24 @@
+#
+# IPACK configuration.
+#
+
+menuconfig IPACK_BUS
+ tristate "IndustryPack bus support"
+ depends on HAS_IOMEM
+ ---help---
+ This option provides support for the IndustryPack framework. There
+ are IndustryPack carrier boards, which interface another bus (such as
+ PCI) to an IndustryPack bus, and IndustryPack modules, that are
+ hosted on these buses. While IndustryPack modules can provide a
+ large variety of functionality, they are most often found in
+ industrial control applications.
+
+ Say N if unsure.
+
+if IPACK_BUS
+
+source "drivers/ipack/carriers/Kconfig"
+
+source "drivers/ipack/devices/Kconfig"
+
+endif # IPACK
diff --git a/drivers/ipack/Makefile b/drivers/ipack/Makefile
new file mode 100644
index 000000000..6f14ade0f
--- /dev/null
+++ b/drivers/ipack/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the IPACK bridge device drivers.
+#
+obj-$(CONFIG_IPACK_BUS) += ipack.o
+obj-y += devices/
+obj-y += carriers/
diff --git a/drivers/ipack/carriers/Kconfig b/drivers/ipack/carriers/Kconfig
new file mode 100644
index 000000000..922ff5c35
--- /dev/null
+++ b/drivers/ipack/carriers/Kconfig
@@ -0,0 +1,7 @@
+config BOARD_TPCI200
+ tristate "Support for the TEWS TPCI-200 IndustryPack carrier board"
+ depends on IPACK_BUS
+ depends on PCI
+ help
+ This driver adds support for the TEWS TPCI200 IndustryPack carrier board.
+ default n
diff --git a/drivers/ipack/carriers/Makefile b/drivers/ipack/carriers/Makefile
new file mode 100644
index 000000000..d8b764593
--- /dev/null
+++ b/drivers/ipack/carriers/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c
new file mode 100644
index 000000000..4c8da6af2
--- /dev/null
+++ b/drivers/ipack/carriers/tpci200.c
@@ -0,0 +1,655 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include "tpci200.h"
+
+static const u16 tpci200_status_timeout[] = {
+ TPCI200_A_TIMEOUT,
+ TPCI200_B_TIMEOUT,
+ TPCI200_C_TIMEOUT,
+ TPCI200_D_TIMEOUT,
+};
+
+static const u16 tpci200_status_error[] = {
+ TPCI200_A_ERROR,
+ TPCI200_B_ERROR,
+ TPCI200_C_ERROR,
+ TPCI200_D_ERROR,
+};
+
+static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = {
+ [IPACK_IO_SPACE] = TPCI200_IO_SPACE_SIZE,
+ [IPACK_ID_SPACE] = TPCI200_ID_SPACE_SIZE,
+ [IPACK_INT_SPACE] = TPCI200_INT_SPACE_SIZE,
+ [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_SIZE,
+ [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE,
+};
+
+static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = {
+ [IPACK_IO_SPACE] = TPCI200_IO_SPACE_INTERVAL,
+ [IPACK_ID_SPACE] = TPCI200_ID_SPACE_INTERVAL,
+ [IPACK_INT_SPACE] = TPCI200_INT_SPACE_INTERVAL,
+ [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_INTERVAL,
+ [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL,
+};
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200;
+
+ if (dev == NULL)
+ return NULL;
+
+
+ tpci200 = dev_get_drvdata(dev->bus->parent);
+
+ if (tpci200 == NULL) {
+ dev_info(&dev->dev, "carrier board not found\n");
+ return NULL;
+ }
+
+ if (dev->slot >= TPCI200_NB_SLOT) {
+ dev_info(&dev->dev,
+ "Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+ dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1);
+ return NULL;
+ }
+
+ return tpci200;
+}
+
+static void tpci200_clear_mask(struct tpci200_board *tpci200,
+ __le16 __iomem *addr, u16 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tpci200->regs_lock, flags);
+ iowrite16(ioread16(addr) & (~mask), addr);
+ spin_unlock_irqrestore(&tpci200->regs_lock, flags);
+}
+
+static void tpci200_set_mask(struct tpci200_board *tpci200,
+ __le16 __iomem *addr, u16 mask)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tpci200->regs_lock, flags);
+ iowrite16(ioread16(addr) | mask, addr);
+ spin_unlock_irqrestore(&tpci200->regs_lock, flags);
+}
+
+static void tpci200_unregister(struct tpci200_board *tpci200)
+{
+ free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+ pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+
+ pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+ pci_disable_device(tpci200->info->pdev);
+}
+
+static void tpci200_enable_irq(struct tpci200_board *tpci200,
+ int islot)
+{
+ tpci200_set_mask(tpci200,
+ &tpci200->info->interface_regs->control[islot],
+ TPCI200_INT0_EN | TPCI200_INT1_EN);
+}
+
+static void tpci200_disable_irq(struct tpci200_board *tpci200,
+ int islot)
+{
+ tpci200_clear_mask(tpci200,
+ &tpci200->info->interface_regs->control[islot],
+ TPCI200_INT0_EN | TPCI200_INT1_EN);
+}
+
+static irqreturn_t tpci200_slot_irq(struct slot_irq *slot_irq)
+{
+ irqreturn_t ret;
+
+ if (!slot_irq)
+ return -ENODEV;
+ ret = slot_irq->handler(slot_irq->arg);
+
+ return ret;
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+ struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+ struct slot_irq *slot_irq;
+ irqreturn_t ret;
+ u16 status_reg;
+ int i;
+
+ /* Read status register */
+ status_reg = ioread16(&tpci200->info->interface_regs->status);
+
+ /* Did we cause the interrupt? */
+ if (!(status_reg & TPCI200_SLOT_INT_MASK))
+ return IRQ_NONE;
+
+ /* callback to the IRQ handler for the corresponding slot */
+ rcu_read_lock();
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if (!(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2 * i))))
+ continue;
+ slot_irq = rcu_dereference(tpci200->slots[i].irq);
+ ret = tpci200_slot_irq(slot_irq);
+ if (ret == -ENODEV) {
+ dev_info(&tpci200->info->pdev->dev,
+ "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n",
+ tpci200->number, i);
+ tpci200_disable_irq(tpci200, i);
+ }
+ }
+ rcu_read_unlock();
+
+ return IRQ_HANDLED;
+}
+
+static int tpci200_free_irq(struct ipack_device *dev)
+{
+ struct slot_irq *slot_irq;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&tpci200->mutex))
+ return -ERESTARTSYS;
+
+ if (tpci200->slots[dev->slot].irq == NULL) {
+ mutex_unlock(&tpci200->mutex);
+ return -EINVAL;
+ }
+
+ tpci200_disable_irq(tpci200, dev->slot);
+ slot_irq = tpci200->slots[dev->slot].irq;
+ /* uninstall handler */
+ RCU_INIT_POINTER(tpci200->slots[dev->slot].irq, NULL);
+ synchronize_rcu();
+ kfree(slot_irq);
+ mutex_unlock(&tpci200->mutex);
+ return 0;
+}
+
+static int tpci200_request_irq(struct ipack_device *dev,
+ irqreturn_t (*handler)(void *), void *arg)
+{
+ int res = 0;
+ struct slot_irq *slot_irq;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&tpci200->mutex))
+ return -ERESTARTSYS;
+
+ if (tpci200->slots[dev->slot].irq != NULL) {
+ dev_err(&dev->dev,
+ "Slot [%d:%d] IRQ already registered !\n",
+ dev->bus->bus_nr,
+ dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+ if (slot_irq == NULL) {
+ dev_err(&dev->dev,
+ "Slot [%d:%d] unable to allocate memory for IRQ !\n",
+ dev->bus->bus_nr, dev->slot);
+ res = -ENOMEM;
+ goto out_unlock;
+ }
+
+ /*
+ * WARNING: Setup Interrupt Vector in the IndustryPack device
+ * before an IRQ request.
+ * Read the User Manual of your IndustryPack device to know
+ * where to write the vector in memory.
+ */
+ slot_irq->handler = handler;
+ slot_irq->arg = arg;
+ slot_irq->holder = dev;
+
+ rcu_assign_pointer(tpci200->slots[dev->slot].irq, slot_irq);
+ tpci200_enable_irq(tpci200, dev->slot);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+ return res;
+}
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+ int i;
+ int res;
+ phys_addr_t ioidint_base;
+ unsigned short slot_ctrl;
+
+ if (pci_enable_device(tpci200->info->pdev) < 0)
+ return -ENODEV;
+
+ /* Request IP interface register (Bar 2) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR,
+ "Carrier IP interface registers");
+ if (res) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ goto err_disable_device;
+ }
+
+ /* Request IO ID INT space (Bar 3) */
+ res = pci_request_region(tpci200->info->pdev,
+ TPCI200_IO_ID_INT_SPACES_BAR,
+ "Carrier IO ID INT space");
+ if (res) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ goto err_ip_interface_bar;
+ }
+
+ /* Request MEM8 space (Bar 5) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR,
+ "Carrier MEM8 space");
+ if (res) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ goto err_io_id_int_spaces_bar;
+ }
+
+ /* Request MEM16 space (Bar 4) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR,
+ "Carrier MEM16 space");
+ if (res) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ goto err_mem8_space_bar;
+ }
+
+ /* Map internal tpci200 driver user space */
+ tpci200->info->interface_regs =
+ ioremap_nocache(pci_resource_start(tpci200->info->pdev,
+ TPCI200_IP_INTERFACE_BAR),
+ TPCI200_IFACE_SIZE);
+ if (!tpci200->info->interface_regs) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) failed to map driver user space!",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ res = -ENOMEM;
+ goto err_mem16_space_bar;
+ }
+
+ /* Initialize lock that protects interface_regs */
+ spin_lock_init(&tpci200->regs_lock);
+
+ ioidint_base = pci_resource_start(tpci200->info->pdev,
+ TPCI200_IO_ID_INT_SPACES_BAR);
+ tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF;
+ tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF;
+ tpci200->mod_mem[IPACK_INT_SPACE] =
+ ioidint_base + TPCI200_INT_SPACE_OFF;
+ tpci200->mod_mem[IPACK_MEM8_SPACE] =
+ pci_resource_start(tpci200->info->pdev,
+ TPCI200_MEM8_SPACE_BAR);
+ tpci200->mod_mem[IPACK_MEM16_SPACE] =
+ pci_resource_start(tpci200->info->pdev,
+ TPCI200_MEM16_SPACE_BAR);
+
+ /* Set the default parameters of the slot
+ * INT0 disabled, level sensitive
+ * INT1 disabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = 0;
+ for (i = 0; i < TPCI200_NB_SLOT; i++)
+ writew(slot_ctrl, &tpci200->info->interface_regs->control[i]);
+
+ res = request_irq(tpci200->info->pdev->irq,
+ tpci200_interrupt, IRQF_SHARED,
+ KBUILD_MODNAME, (void *) tpci200);
+ if (res) {
+ dev_err(&tpci200->info->pdev->dev,
+ "(bn 0x%X, sn 0x%X) unable to register IRQ !",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn);
+ goto err_interface_regs;
+ }
+
+ return 0;
+
+err_interface_regs:
+ pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+err_mem16_space_bar:
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
+err_mem8_space_bar:
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+err_io_id_int_spaces_bar:
+ pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+err_ip_interface_bar:
+ pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+err_disable_device:
+ pci_disable_device(tpci200->info->pdev);
+ return res;
+}
+
+static int tpci200_get_clockrate(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200 = check_slot(dev);
+ __le16 __iomem *addr;
+
+ if (!tpci200)
+ return -ENODEV;
+
+ addr = &tpci200->info->interface_regs->control[dev->slot];
+ return (ioread16(addr) & TPCI200_CLK32) ? 32 : 8;
+}
+
+static int tpci200_set_clockrate(struct ipack_device *dev, int mherz)
+{
+ struct tpci200_board *tpci200 = check_slot(dev);
+ __le16 __iomem *addr;
+
+ if (!tpci200)
+ return -ENODEV;
+
+ addr = &tpci200->info->interface_regs->control[dev->slot];
+
+ switch (mherz) {
+ case 8:
+ tpci200_clear_mask(tpci200, addr, TPCI200_CLK32);
+ break;
+ case 32:
+ tpci200_set_mask(tpci200, addr, TPCI200_CLK32);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int tpci200_get_error(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200 = check_slot(dev);
+ __le16 __iomem *addr;
+ u16 mask;
+
+ if (!tpci200)
+ return -ENODEV;
+
+ addr = &tpci200->info->interface_regs->status;
+ mask = tpci200_status_error[dev->slot];
+ return (ioread16(addr) & mask) ? 1 : 0;
+}
+
+static int tpci200_get_timeout(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200 = check_slot(dev);
+ __le16 __iomem *addr;
+ u16 mask;
+
+ if (!tpci200)
+ return -ENODEV;
+
+ addr = &tpci200->info->interface_regs->status;
+ mask = tpci200_status_timeout[dev->slot];
+
+ return (ioread16(addr) & mask) ? 1 : 0;
+}
+
+static int tpci200_reset_timeout(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200 = check_slot(dev);
+ __le16 __iomem *addr;
+ u16 mask;
+
+ if (!tpci200)
+ return -ENODEV;
+
+ addr = &tpci200->info->interface_regs->status;
+ mask = tpci200_status_timeout[dev->slot];
+
+ iowrite16(mask, addr);
+ return 0;
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+ tpci200_unregister(tpci200);
+ kfree(tpci200->slots);
+}
+
+static const struct ipack_bus_ops tpci200_bus_ops = {
+ .request_irq = tpci200_request_irq,
+ .free_irq = tpci200_free_irq,
+ .get_clockrate = tpci200_get_clockrate,
+ .set_clockrate = tpci200_set_clockrate,
+ .get_error = tpci200_get_error,
+ .get_timeout = tpci200_get_timeout,
+ .reset_timeout = tpci200_reset_timeout,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+ int res;
+
+ tpci200->slots = kcalloc(TPCI200_NB_SLOT, sizeof(struct tpci200_slot),
+ GFP_KERNEL);
+ if (tpci200->slots == NULL)
+ return -ENOMEM;
+
+ res = tpci200_register(tpci200);
+ if (res) {
+ kfree(tpci200->slots);
+ tpci200->slots = NULL;
+ return res;
+ }
+
+ mutex_init(&tpci200->mutex);
+ return 0;
+}
+
+static void tpci200_release_device(struct ipack_device *dev)
+{
+ kfree(dev);
+}
+
+static int tpci200_create_device(struct tpci200_board *tpci200, int i)
+{
+ int ret;
+ enum ipack_space space;
+ struct ipack_device *dev =
+ kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ dev->slot = i;
+ dev->bus = tpci200->info->ipack_bus;
+ dev->release = tpci200_release_device;
+
+ for (space = 0; space < IPACK_SPACE_COUNT; space++) {
+ dev->region[space].start =
+ tpci200->mod_mem[space]
+ + tpci200_space_interval[space] * i;
+ dev->region[space].size = tpci200_space_size[space];
+ }
+
+ ret = ipack_device_init(dev);
+ if (ret < 0) {
+ ipack_put_device(dev);
+ return ret;
+ }
+
+ ret = ipack_device_add(dev);
+ if (ret < 0)
+ ipack_put_device(dev);
+
+ return ret;
+}
+
+static int tpci200_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int ret, i;
+ struct tpci200_board *tpci200;
+ u32 reg32;
+
+ tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+ if (!tpci200)
+ return -ENOMEM;
+
+ tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+ if (!tpci200->info) {
+ ret = -ENOMEM;
+ goto err_tpci200;
+ }
+
+ pci_dev_get(pdev);
+
+ /* Obtain a mapping of the carrier's PCI configuration registers */
+ ret = pci_request_region(pdev, TPCI200_CFG_MEM_BAR,
+ KBUILD_MODNAME " Configuration Memory");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory");
+ ret = -EBUSY;
+ goto err_tpci200_info;
+ }
+ tpci200->info->cfg_regs = ioremap_nocache(
+ pci_resource_start(pdev, TPCI200_CFG_MEM_BAR),
+ pci_resource_len(pdev, TPCI200_CFG_MEM_BAR));
+ if (!tpci200->info->cfg_regs) {
+ dev_err(&pdev->dev, "Failed to map PCI Configuration Memory");
+ ret = -EFAULT;
+ goto err_request_region;
+ }
+
+ /* Disable byte swapping for 16 bit IP module access. This will ensure
+ * that the Industrypack big endian byte order is preserved by the
+ * carrier. */
+ reg32 = ioread32(tpci200->info->cfg_regs + LAS1_DESC);
+ reg32 |= 1 << LAS_BIT_BIGENDIAN;
+ iowrite32(reg32, tpci200->info->cfg_regs + LAS1_DESC);
+
+ reg32 = ioread32(tpci200->info->cfg_regs + LAS2_DESC);
+ reg32 |= 1 << LAS_BIT_BIGENDIAN;
+ iowrite32(reg32, tpci200->info->cfg_regs + LAS2_DESC);
+
+ /* Save struct pci_dev pointer */
+ tpci200->info->pdev = pdev;
+ tpci200->info->id_table = (struct pci_device_id *)id;
+
+ /* register the device and initialize it */
+ ret = tpci200_install(tpci200);
+ if (ret) {
+ dev_err(&pdev->dev, "error during tpci200 install\n");
+ ret = -ENODEV;
+ goto err_cfg_regs;
+ }
+
+ /* Register the carrier in the industry pack bus driver */
+ tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev,
+ TPCI200_NB_SLOT,
+ &tpci200_bus_ops,
+ THIS_MODULE);
+ if (!tpci200->info->ipack_bus) {
+ dev_err(&pdev->dev,
+ "error registering the carrier on ipack driver\n");
+ ret = -EFAULT;
+ goto err_tpci200_install;
+ }
+
+ /* save the bus number given by ipack to logging purpose */
+ tpci200->number = tpci200->info->ipack_bus->bus_nr;
+ dev_set_drvdata(&pdev->dev, tpci200);
+
+ for (i = 0; i < TPCI200_NB_SLOT; i++)
+ tpci200_create_device(tpci200, i);
+ return 0;
+
+err_tpci200_install:
+ tpci200_uninstall(tpci200);
+err_cfg_regs:
+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+err_request_region:
+ pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
+err_tpci200_info:
+ kfree(tpci200->info);
+ pci_dev_put(pdev);
+err_tpci200:
+ kfree(tpci200);
+ return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+ ipack_bus_unregister(tpci200->info->ipack_bus);
+ tpci200_uninstall(tpci200);
+
+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+
+ pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
+
+ pci_dev_put(tpci200->info->pdev);
+
+ kfree(tpci200->info);
+ kfree(tpci200);
+}
+
+static void tpci200_pci_remove(struct pci_dev *dev)
+{
+ struct tpci200_board *tpci200 = pci_get_drvdata(dev);
+
+ __tpci200_pci_remove(tpci200);
+}
+
+static const struct pci_device_id tpci200_idtable[] = {
+ { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID,
+ TPCI200_SUBDEVICE_ID },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, tpci200_idtable);
+
+static struct pci_driver tpci200_pci_drv = {
+ .name = "tpci200",
+ .id_table = tpci200_idtable,
+ .probe = tpci200_pci_probe,
+ .remove = tpci200_pci_remove,
+};
+
+module_pci_driver(tpci200_pci_drv);
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ipack/carriers/tpci200.h b/drivers/ipack/carriers/tpci200.h
new file mode 100644
index 000000000..a7a151dab
--- /dev/null
+++ b/drivers/ipack/carriers/tpci200.h
@@ -0,0 +1,167 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+#include <linux/ipack.h>
+
+#define TPCI200_NB_SLOT 0x4
+#define TPCI200_NB_BAR 0x6
+
+#define TPCI200_VENDOR_ID 0x1498
+#define TPCI200_DEVICE_ID 0x30C8
+#define TPCI200_SUBVENDOR_ID 0x1498
+#define TPCI200_SUBDEVICE_ID 0x300A
+
+#define TPCI200_CFG_MEM_BAR 0
+#define TPCI200_IP_INTERFACE_BAR 2
+#define TPCI200_IO_ID_INT_SPACES_BAR 3
+#define TPCI200_MEM16_SPACE_BAR 4
+#define TPCI200_MEM8_SPACE_BAR 5
+
+struct tpci200_regs {
+ __le16 revision;
+ /* writes to control should occur with the mutex held to protect
+ * read-modify-write operations */
+ __le16 control[4];
+ __le16 reset;
+ __le16 status;
+ u8 reserved[242];
+} __packed;
+
+#define TPCI200_IFACE_SIZE 0x100
+
+#define TPCI200_IO_SPACE_OFF 0x0000
+#define TPCI200_IO_SPACE_INTERVAL 0x0100
+#define TPCI200_IO_SPACE_SIZE 0x0080
+#define TPCI200_ID_SPACE_OFF 0x0080
+#define TPCI200_ID_SPACE_INTERVAL 0x0100
+#define TPCI200_ID_SPACE_SIZE 0x0040
+#define TPCI200_INT_SPACE_OFF 0x00C0
+#define TPCI200_INT_SPACE_INTERVAL 0x0100
+#define TPCI200_INT_SPACE_SIZE 0x0040
+#define TPCI200_IOIDINT_SIZE 0x0400
+
+#define TPCI200_MEM8_SPACE_INTERVAL 0x00400000
+#define TPCI200_MEM8_SPACE_SIZE 0x00400000
+#define TPCI200_MEM16_SPACE_INTERVAL 0x00800000
+#define TPCI200_MEM16_SPACE_SIZE 0x00800000
+
+/* control field in tpci200_regs */
+#define TPCI200_INT0_EN 0x0040
+#define TPCI200_INT1_EN 0x0080
+#define TPCI200_INT0_EDGE 0x0010
+#define TPCI200_INT1_EDGE 0x0020
+#define TPCI200_ERR_INT_EN 0x0008
+#define TPCI200_TIME_INT_EN 0x0004
+#define TPCI200_RECOVER_EN 0x0002
+#define TPCI200_CLK32 0x0001
+
+/* reset field in tpci200_regs */
+#define TPCI200_A_RESET 0x0001
+#define TPCI200_B_RESET 0x0002
+#define TPCI200_C_RESET 0x0004
+#define TPCI200_D_RESET 0x0008
+
+/* status field in tpci200_regs */
+#define TPCI200_A_TIMEOUT 0x1000
+#define TPCI200_B_TIMEOUT 0x2000
+#define TPCI200_C_TIMEOUT 0x4000
+#define TPCI200_D_TIMEOUT 0x8000
+
+#define TPCI200_A_ERROR 0x0100
+#define TPCI200_B_ERROR 0x0200
+#define TPCI200_C_ERROR 0x0400
+#define TPCI200_D_ERROR 0x0800
+
+#define TPCI200_A_INT0 0x0001
+#define TPCI200_A_INT1 0x0002
+#define TPCI200_B_INT0 0x0004
+#define TPCI200_B_INT1 0x0008
+#define TPCI200_C_INT0 0x0010
+#define TPCI200_C_INT1 0x0020
+#define TPCI200_D_INT0 0x0040
+#define TPCI200_D_INT1 0x0080
+
+#define TPCI200_SLOT_INT_MASK 0x00FF
+
+/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */
+#define LAS1_DESC 0x2C
+#define LAS2_DESC 0x30
+
+/* Bits in the LAS?_DESC registers */
+#define LAS_BIT_BIGENDIAN 24
+
+#define VME_IOID_SPACE "IOID"
+#define VME_MEM_SPACE "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector Vector number
+ * @handler Handler called when IRQ arrives
+ * @arg Handler argument
+ *
+ */
+struct slot_irq {
+ struct ipack_device *holder;
+ int vector;
+ irqreturn_t (*handler)(void *);
+ void *arg;
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id Slot identification gived to external interface
+ * @irq Slot IRQ infos
+ * @io_phys IO physical base address register of the slot
+ * @id_phys ID physical base address register of the slot
+ * @int_phys INT physical base address register of the slot
+ * @mem_phys MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+ struct slot_irq *irq;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev PCI device
+ * @interface_regs Pointer to IP interface space (Bar 2)
+ * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space Pointer to MEM space (Bar 4)
+ *
+ */
+struct tpci200_infos {
+ struct pci_dev *pdev;
+ struct pci_device_id *id_table;
+ struct tpci200_regs __iomem *interface_regs;
+ void __iomem *cfg_regs;
+ struct ipack_bus_device *ipack_bus;
+};
+struct tpci200_board {
+ unsigned int number;
+ struct mutex mutex;
+ spinlock_t regs_lock;
+ struct tpci200_slot *slots;
+ struct tpci200_infos *info;
+ phys_addr_t mod_mem[IPACK_SPACE_COUNT];
+};
+
+#endif /* _TPCI200_H_ */
diff --git a/drivers/ipack/devices/Kconfig b/drivers/ipack/devices/Kconfig
new file mode 100644
index 000000000..907a8cb48
--- /dev/null
+++ b/drivers/ipack/devices/Kconfig
@@ -0,0 +1,6 @@
+config SERIAL_IPOCTAL
+ tristate "IndustryPack IP-OCTAL uart support"
+ depends on IPACK_BUS && TTY
+ help
+ This driver supports the IPOCTAL serial port device for the IndustryPack bus.
+ default n
diff --git a/drivers/ipack/devices/Makefile b/drivers/ipack/devices/Makefile
new file mode 100644
index 000000000..6de18bda4
--- /dev/null
+++ b/drivers/ipack/devices/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERIAL_IPOCTAL) += ipoctal.o
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
new file mode 100644
index 000000000..f558aeb8f
--- /dev/null
+++ b/drivers/ipack/devices/ipoctal.c
@@ -0,0 +1,782 @@
+/**
+ * ipoctal.c
+ *
+ * driver for the GE IP-OCTAL boards
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/ipack.h>
+#include "ipoctal.h"
+#include "scc2698.h"
+
+#define IP_OCTAL_ID_SPACE_VECTOR 0x41
+#define IP_OCTAL_NB_BLOCKS 4
+
+static const struct tty_operations ipoctal_fops;
+
+struct ipoctal_channel {
+ struct ipoctal_stats stats;
+ unsigned int nb_bytes;
+ wait_queue_head_t queue;
+ spinlock_t lock;
+ unsigned int pointer_read;
+ unsigned int pointer_write;
+ struct tty_port tty_port;
+ bool tty_registered;
+ union scc2698_channel __iomem *regs;
+ union scc2698_block __iomem *block_regs;
+ unsigned int board_id;
+ u8 isr_rx_rdy_mask;
+ u8 isr_tx_rdy_mask;
+ unsigned int rx_enable;
+};
+
+struct ipoctal {
+ struct ipack_device *dev;
+ unsigned int board_id;
+ struct ipoctal_channel channel[NR_CHANNELS];
+ struct tty_driver *tty_drv;
+ u8 __iomem *mem8_space;
+ u8 __iomem *int_space;
+};
+
+static inline struct ipoctal *chan_to_ipoctal(struct ipoctal_channel *chan,
+ unsigned int index)
+{
+ return container_of(chan, struct ipoctal, channel[index]);
+}
+
+static void ipoctal_reset_channel(struct ipoctal_channel *channel)
+{
+ iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+ channel->rx_enable = 0;
+ iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+ iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+ iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+ iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+}
+
+static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel;
+
+ channel = dev_get_drvdata(tty->dev);
+
+ /*
+ * Enable RX. TX will be enabled when
+ * there is something to send
+ */
+ iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+ channel->rx_enable = 1;
+ return 0;
+}
+
+static int ipoctal_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel = dev_get_drvdata(tty->dev);
+ struct ipoctal *ipoctal = chan_to_ipoctal(channel, tty->index);
+ int res;
+
+ if (!ipack_get_carrier(ipoctal->dev))
+ return -EBUSY;
+
+ res = tty_standard_install(driver, tty);
+ if (res)
+ goto err_put_carrier;
+
+ tty->driver_data = channel;
+
+ return 0;
+
+err_put_carrier:
+ ipack_put_carrier(ipoctal->dev);
+
+ return res;
+}
+
+static int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ return tty_port_open(&channel->tty_port, tty, file);
+}
+
+static void ipoctal_reset_stats(struct ipoctal_stats *stats)
+{
+ stats->tx = 0;
+ stats->rx = 0;
+ stats->rcv_break = 0;
+ stats->framing_err = 0;
+ stats->overrun_err = 0;
+ stats->parity_err = 0;
+}
+
+static void ipoctal_free_channel(struct ipoctal_channel *channel)
+{
+ ipoctal_reset_stats(&channel->stats);
+ channel->pointer_read = 0;
+ channel->pointer_write = 0;
+ channel->nb_bytes = 0;
+}
+
+static void ipoctal_close(struct tty_struct *tty, struct file *filp)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ tty_port_close(&channel->tty_port, tty, filp);
+ ipoctal_free_channel(channel);
+}
+
+static int ipoctal_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ icount->cts = 0;
+ icount->dsr = 0;
+ icount->rng = 0;
+ icount->dcd = 0;
+ icount->rx = channel->stats.rx;
+ icount->tx = channel->stats.tx;
+ icount->frame = channel->stats.framing_err;
+ icount->parity = channel->stats.parity_err;
+ icount->brk = channel->stats.rcv_break;
+ return 0;
+}
+
+static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
+{
+ struct tty_port *port = &channel->tty_port;
+ unsigned char value;
+ unsigned char flag;
+ u8 isr;
+
+ do {
+ value = ioread8(&channel->regs->r.rhr);
+ flag = TTY_NORMAL;
+ /* Error: count statistics */
+ if (sr & SR_ERROR) {
+ iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+
+ if (sr & SR_OVERRUN_ERROR) {
+ channel->stats.overrun_err++;
+ /* Overrun doesn't affect the current character*/
+ tty_insert_flip_char(port, 0, TTY_OVERRUN);
+ }
+ if (sr & SR_PARITY_ERROR) {
+ channel->stats.parity_err++;
+ flag = TTY_PARITY;
+ }
+ if (sr & SR_FRAMING_ERROR) {
+ channel->stats.framing_err++;
+ flag = TTY_FRAME;
+ }
+ if (sr & SR_RECEIVED_BREAK) {
+ channel->stats.rcv_break++;
+ flag = TTY_BREAK;
+ }
+ }
+ tty_insert_flip_char(port, value, flag);
+
+ /* Check if there are more characters in RX FIFO
+ * If there are more, the isr register for this channel
+ * has enabled the RxRDY|FFULL bit.
+ */
+ isr = ioread8(&channel->block_regs->r.isr);
+ sr = ioread8(&channel->regs->r.sr);
+ } while (isr & channel->isr_rx_rdy_mask);
+
+ tty_flip_buffer_push(port);
+}
+
+static void ipoctal_irq_tx(struct ipoctal_channel *channel)
+{
+ unsigned char value;
+ unsigned int *pointer_write = &channel->pointer_write;
+
+ if (channel->nb_bytes == 0)
+ return;
+
+ spin_lock(&channel->lock);
+ value = channel->tty_port.xmit_buf[*pointer_write];
+ iowrite8(value, &channel->regs->w.thr);
+ channel->stats.tx++;
+ (*pointer_write)++;
+ *pointer_write = *pointer_write % PAGE_SIZE;
+ channel->nb_bytes--;
+ spin_unlock(&channel->lock);
+}
+
+static void ipoctal_irq_channel(struct ipoctal_channel *channel)
+{
+ u8 isr, sr;
+
+ /* The HW is organized in pair of channels. See which register we need
+ * to read from */
+ isr = ioread8(&channel->block_regs->r.isr);
+ sr = ioread8(&channel->regs->r.sr);
+
+ if (isr & (IMR_DELTA_BREAK_A | IMR_DELTA_BREAK_B))
+ iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
+
+ if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
+ iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
+ /* In case of RS-485, change from TX to RX when finishing TX.
+ * Half-duplex. */
+ if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+ iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
+ iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+ channel->rx_enable = 1;
+ }
+ }
+
+ /* RX data */
+ if ((isr & channel->isr_rx_rdy_mask) && (sr & SR_RX_READY))
+ ipoctal_irq_rx(channel, sr);
+
+ /* TX of each character */
+ if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
+ ipoctal_irq_tx(channel);
+}
+
+static irqreturn_t ipoctal_irq_handler(void *arg)
+{
+ unsigned int i;
+ struct ipoctal *ipoctal = (struct ipoctal *) arg;
+
+ /* Clear the IPack device interrupt */
+ readw(ipoctal->int_space + ACK_INT_REQ0);
+ readw(ipoctal->int_space + ACK_INT_REQ1);
+
+ /* Check all channels */
+ for (i = 0; i < NR_CHANNELS; i++)
+ ipoctal_irq_channel(&ipoctal->channel[i]);
+
+ return IRQ_HANDLED;
+}
+
+static const struct tty_port_operations ipoctal_tty_port_ops = {
+ .dtr_rts = NULL,
+ .activate = ipoctal_port_activate,
+};
+
+static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
+ unsigned int slot)
+{
+ int res;
+ int i;
+ struct tty_driver *tty;
+ struct ipoctal_channel *channel;
+ struct ipack_region *region;
+ void __iomem *addr;
+ union scc2698_channel __iomem *chan_regs;
+ union scc2698_block __iomem *block_regs;
+
+ ipoctal->board_id = ipoctal->dev->id_device;
+
+ region = &ipoctal->dev->region[IPACK_IO_SPACE];
+ addr = devm_ioremap_nocache(&ipoctal->dev->dev,
+ region->start, region->size);
+ if (!addr) {
+ dev_err(&ipoctal->dev->dev,
+ "Unable to map slot [%d:%d] IO space!\n",
+ bus_nr, slot);
+ return -EADDRNOTAVAIL;
+ }
+ /* Save the virtual address to access the registers easily */
+ chan_regs =
+ (union scc2698_channel __iomem *) addr;
+ block_regs =
+ (union scc2698_block __iomem *) addr;
+
+ region = &ipoctal->dev->region[IPACK_INT_SPACE];
+ ipoctal->int_space =
+ devm_ioremap_nocache(&ipoctal->dev->dev,
+ region->start, region->size);
+ if (!ipoctal->int_space) {
+ dev_err(&ipoctal->dev->dev,
+ "Unable to map slot [%d:%d] INT space!\n",
+ bus_nr, slot);
+ return -EADDRNOTAVAIL;
+ }
+
+ region = &ipoctal->dev->region[IPACK_MEM8_SPACE];
+ ipoctal->mem8_space =
+ devm_ioremap_nocache(&ipoctal->dev->dev,
+ region->start, 0x8000);
+ if (!ipoctal->mem8_space) {
+ dev_err(&ipoctal->dev->dev,
+ "Unable to map slot [%d:%d] MEM8 space!\n",
+ bus_nr, slot);
+ return -EADDRNOTAVAIL;
+ }
+
+
+ /* Disable RX and TX before touching anything */
+ for (i = 0; i < NR_CHANNELS ; i++) {
+ struct ipoctal_channel *channel = &ipoctal->channel[i];
+ channel->regs = chan_regs + i;
+ channel->block_regs = block_regs + (i >> 1);
+ channel->board_id = ipoctal->board_id;
+ if (i & 1) {
+ channel->isr_tx_rdy_mask = ISR_TxRDY_B;
+ channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_B;
+ } else {
+ channel->isr_tx_rdy_mask = ISR_TxRDY_A;
+ channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_A;
+ }
+
+ ipoctal_reset_channel(channel);
+ iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY,
+ &channel->regs->w.mr); /* mr1 */
+ iowrite8(0, &channel->regs->w.mr); /* mr2 */
+ iowrite8(TX_CLK_9600 | RX_CLK_9600, &channel->regs->w.csr);
+ }
+
+ for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) {
+ iowrite8(ACR_BRG_SET2, &block_regs[i].w.acr);
+ iowrite8(OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | OPCR_MPOb_RTSN,
+ &block_regs[i].w.opcr);
+ iowrite8(IMR_TxRDY_A | IMR_RxRDY_FFULL_A | IMR_DELTA_BREAK_A |
+ IMR_TxRDY_B | IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B,
+ &block_regs[i].w.imr);
+ }
+
+ /* Dummy write */
+ iowrite8(1, ipoctal->mem8_space + 1);
+
+ /* Register the TTY device */
+
+ /* Each IP-OCTAL channel is a TTY port */
+ tty = alloc_tty_driver(NR_CHANNELS);
+
+ if (!tty)
+ return -ENOMEM;
+
+ /* Fill struct tty_driver with ipoctal data */
+ tty->owner = THIS_MODULE;
+ tty->driver_name = KBUILD_MODNAME;
+ tty->name = kasprintf(GFP_KERNEL, KBUILD_MODNAME ".%d.%d.", bus_nr, slot);
+ if (!tty->name) {
+ res = -ENOMEM;
+ goto err_put_driver;
+ }
+ tty->major = 0;
+
+ tty->minor_start = 0;
+ tty->type = TTY_DRIVER_TYPE_SERIAL;
+ tty->subtype = SERIAL_TYPE_NORMAL;
+ tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty->init_termios = tty_std_termios;
+ tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->init_termios.c_ispeed = 9600;
+ tty->init_termios.c_ospeed = 9600;
+
+ tty_set_operations(tty, &ipoctal_fops);
+ res = tty_register_driver(tty);
+ if (res) {
+ dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n");
+ goto err_free_name;
+ }
+
+ /* Save struct tty_driver for use it when uninstalling the device */
+ ipoctal->tty_drv = tty;
+
+ for (i = 0; i < NR_CHANNELS; i++) {
+ struct device *tty_dev;
+
+ channel = &ipoctal->channel[i];
+ tty_port_init(&channel->tty_port);
+ res = tty_port_alloc_xmit_buf(&channel->tty_port);
+ if (res)
+ continue;
+ channel->tty_port.ops = &ipoctal_tty_port_ops;
+
+ ipoctal_reset_stats(&channel->stats);
+ channel->nb_bytes = 0;
+ spin_lock_init(&channel->lock);
+ channel->pointer_read = 0;
+ channel->pointer_write = 0;
+ tty_dev = tty_port_register_device_attr(&channel->tty_port, tty,
+ i, NULL, channel, NULL);
+ if (IS_ERR(tty_dev)) {
+ dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
+ tty_port_free_xmit_buf(&channel->tty_port);
+ tty_port_destroy(&channel->tty_port);
+ continue;
+ }
+ channel->tty_registered = true;
+ }
+
+ /*
+ * IP-OCTAL has different addresses to copy its IRQ vector.
+ * Depending of the carrier these addresses are accesible or not.
+ * More info in the datasheet.
+ */
+ ipoctal->dev->bus->ops->request_irq(ipoctal->dev,
+ ipoctal_irq_handler, ipoctal);
+
+ return 0;
+
+err_free_name:
+ kfree(tty->name);
+err_put_driver:
+ put_tty_driver(tty);
+
+ return res;
+}
+
+static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel,
+ const unsigned char *buf,
+ int count)
+{
+ unsigned long flags;
+ int i;
+ unsigned int *pointer_read = &channel->pointer_read;
+
+ /* Copy the bytes from the user buffer to the internal one */
+ for (i = 0; i < count; i++) {
+ if (i <= (PAGE_SIZE - channel->nb_bytes)) {
+ spin_lock_irqsave(&channel->lock, flags);
+ channel->tty_port.xmit_buf[*pointer_read] = buf[i];
+ *pointer_read = (*pointer_read + 1) % PAGE_SIZE;
+ channel->nb_bytes++;
+ spin_unlock_irqrestore(&channel->lock, flags);
+ } else {
+ break;
+ }
+ }
+ return i;
+}
+
+static int ipoctal_write_tty(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+ unsigned int char_copied;
+
+ char_copied = ipoctal_copy_write_buffer(channel, buf, count);
+
+ /* As the IP-OCTAL 485 only supports half duplex, do it manually */
+ if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+ iowrite8(CR_DISABLE_RX, &channel->regs->w.cr);
+ channel->rx_enable = 0;
+ iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr);
+ }
+
+ /*
+ * Send a packet and then disable TX to avoid failure after several send
+ * operations
+ */
+ iowrite8(CR_ENABLE_TX, &channel->regs->w.cr);
+ return char_copied;
+}
+
+static int ipoctal_write_room(struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ return PAGE_SIZE - channel->nb_bytes;
+}
+
+static int ipoctal_chars_in_buffer(struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ return channel->nb_bytes;
+}
+
+static void ipoctal_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
+{
+ unsigned int cflag;
+ unsigned char mr1 = 0;
+ unsigned char mr2 = 0;
+ unsigned char csr = 0;
+ struct ipoctal_channel *channel = tty->driver_data;
+ speed_t baud;
+
+ cflag = tty->termios.c_cflag;
+
+ /* Disable and reset everything before change the setup */
+ ipoctal_reset_channel(channel);
+
+ /* Set Bits per chars */
+ switch (cflag & CSIZE) {
+ case CS6:
+ mr1 |= MR1_CHRL_6_BITS;
+ break;
+ case CS7:
+ mr1 |= MR1_CHRL_7_BITS;
+ break;
+ case CS8:
+ default:
+ mr1 |= MR1_CHRL_8_BITS;
+ /* By default, select CS8 */
+ tty->termios.c_cflag = (cflag & ~CSIZE) | CS8;
+ break;
+ }
+
+ /* Set Parity */
+ if (cflag & PARENB)
+ if (cflag & PARODD)
+ mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD;
+ else
+ mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN;
+ else
+ mr1 |= MR1_PARITY_OFF;
+
+ /* Mark or space parity is not supported */
+ tty->termios.c_cflag &= ~CMSPAR;
+
+ /* Set stop bits */
+ if (cflag & CSTOPB)
+ mr2 |= MR2_STOP_BITS_LENGTH_2;
+ else
+ mr2 |= MR2_STOP_BITS_LENGTH_1;
+
+ /* Set the flow control */
+ switch (channel->board_id) {
+ case IPACK1_DEVICE_ID_SBS_OCTAL_232:
+ if (cflag & CRTSCTS) {
+ mr1 |= MR1_RxRTS_CONTROL_ON;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
+ } else {
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+ }
+ break;
+ case IPACK1_DEVICE_ID_SBS_OCTAL_422:
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+ break;
+ case IPACK1_DEVICE_ID_SBS_OCTAL_485:
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
+ break;
+ default:
+ return;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
+
+ /* Set baud rate */
+ switch (baud) {
+ case 75:
+ csr |= TX_CLK_75 | RX_CLK_75;
+ break;
+ case 110:
+ csr |= TX_CLK_110 | RX_CLK_110;
+ break;
+ case 150:
+ csr |= TX_CLK_150 | RX_CLK_150;
+ break;
+ case 300:
+ csr |= TX_CLK_300 | RX_CLK_300;
+ break;
+ case 600:
+ csr |= TX_CLK_600 | RX_CLK_600;
+ break;
+ case 1200:
+ csr |= TX_CLK_1200 | RX_CLK_1200;
+ break;
+ case 1800:
+ csr |= TX_CLK_1800 | RX_CLK_1800;
+ break;
+ case 2000:
+ csr |= TX_CLK_2000 | RX_CLK_2000;
+ break;
+ case 2400:
+ csr |= TX_CLK_2400 | RX_CLK_2400;
+ break;
+ case 4800:
+ csr |= TX_CLK_4800 | RX_CLK_4800;
+ break;
+ case 9600:
+ csr |= TX_CLK_9600 | RX_CLK_9600;
+ break;
+ case 19200:
+ csr |= TX_CLK_19200 | RX_CLK_19200;
+ break;
+ case 38400:
+ default:
+ csr |= TX_CLK_38400 | RX_CLK_38400;
+ /* In case of default, we establish 38400 bps */
+ tty_termios_encode_baud_rate(&tty->termios, 38400, 38400);
+ break;
+ }
+
+ mr1 |= MR1_ERROR_CHAR;
+ mr1 |= MR1_RxINT_RxRDY;
+
+ /* Write the control registers */
+ iowrite8(mr1, &channel->regs->w.mr);
+ iowrite8(mr2, &channel->regs->w.mr);
+ iowrite8(csr, &channel->regs->w.csr);
+
+ /* Enable again the RX, if it was before */
+ if (channel->rx_enable)
+ iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+}
+
+static void ipoctal_hangup(struct tty_struct *tty)
+{
+ unsigned long flags;
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ if (channel == NULL)
+ return;
+
+ spin_lock_irqsave(&channel->lock, flags);
+ channel->nb_bytes = 0;
+ channel->pointer_read = 0;
+ channel->pointer_write = 0;
+ spin_unlock_irqrestore(&channel->lock, flags);
+
+ tty_port_hangup(&channel->tty_port);
+
+ ipoctal_reset_channel(channel);
+ tty_port_set_initialized(&channel->tty_port, 0);
+ wake_up_interruptible(&channel->tty_port.open_wait);
+}
+
+static void ipoctal_shutdown(struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+
+ if (channel == NULL)
+ return;
+
+ ipoctal_reset_channel(channel);
+ tty_port_set_initialized(&channel->tty_port, 0);
+}
+
+static void ipoctal_cleanup(struct tty_struct *tty)
+{
+ struct ipoctal_channel *channel = tty->driver_data;
+ struct ipoctal *ipoctal = chan_to_ipoctal(channel, tty->index);
+
+ /* release the carrier driver */
+ ipack_put_carrier(ipoctal->dev);
+}
+
+static const struct tty_operations ipoctal_fops = {
+ .ioctl = NULL,
+ .install = ipoctal_install,
+ .open = ipoctal_open,
+ .close = ipoctal_close,
+ .write = ipoctal_write_tty,
+ .set_termios = ipoctal_set_termios,
+ .write_room = ipoctal_write_room,
+ .chars_in_buffer = ipoctal_chars_in_buffer,
+ .get_icount = ipoctal_get_icount,
+ .hangup = ipoctal_hangup,
+ .shutdown = ipoctal_shutdown,
+ .cleanup = ipoctal_cleanup,
+};
+
+static int ipoctal_probe(struct ipack_device *dev)
+{
+ int res;
+ struct ipoctal *ipoctal;
+
+ ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL);
+ if (ipoctal == NULL)
+ return -ENOMEM;
+
+ ipoctal->dev = dev;
+ res = ipoctal_inst_slot(ipoctal, dev->bus->bus_nr, dev->slot);
+ if (res)
+ goto out_uninst;
+
+ dev_set_drvdata(&dev->dev, ipoctal);
+ return 0;
+
+out_uninst:
+ kfree(ipoctal);
+ return res;
+}
+
+static void __ipoctal_remove(struct ipoctal *ipoctal)
+{
+ int i;
+
+ ipoctal->dev->bus->ops->free_irq(ipoctal->dev);
+
+ for (i = 0; i < NR_CHANNELS; i++) {
+ struct ipoctal_channel *channel = &ipoctal->channel[i];
+
+ if (!channel->tty_registered)
+ continue;
+
+ tty_unregister_device(ipoctal->tty_drv, i);
+ tty_port_free_xmit_buf(&channel->tty_port);
+ tty_port_destroy(&channel->tty_port);
+ }
+
+ tty_unregister_driver(ipoctal->tty_drv);
+ kfree(ipoctal->tty_drv->name);
+ put_tty_driver(ipoctal->tty_drv);
+ kfree(ipoctal);
+}
+
+static void ipoctal_remove(struct ipack_device *idev)
+{
+ __ipoctal_remove(dev_get_drvdata(&idev->dev));
+}
+
+static DEFINE_IPACK_DEVICE_TABLE(ipoctal_ids) = {
+ { IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+ IPACK1_DEVICE_ID_SBS_OCTAL_232) },
+ { IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+ IPACK1_DEVICE_ID_SBS_OCTAL_422) },
+ { IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+ IPACK1_DEVICE_ID_SBS_OCTAL_485) },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(ipack, ipoctal_ids);
+
+static const struct ipack_driver_ops ipoctal_drv_ops = {
+ .probe = ipoctal_probe,
+ .remove = ipoctal_remove,
+};
+
+static struct ipack_driver driver = {
+ .ops = &ipoctal_drv_ops,
+ .id_table = ipoctal_ids,
+};
+
+static int __init ipoctal_init(void)
+{
+ return ipack_driver_register(&driver, THIS_MODULE, KBUILD_MODNAME);
+}
+
+static void __exit ipoctal_exit(void)
+{
+ ipack_driver_unregister(&driver);
+}
+
+MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver");
+MODULE_LICENSE("GPL");
+
+module_init(ipoctal_init);
+module_exit(ipoctal_exit);
diff --git a/drivers/ipack/devices/ipoctal.h b/drivers/ipack/devices/ipoctal.h
new file mode 100644
index 000000000..7fede0eb6
--- /dev/null
+++ b/drivers/ipack/devices/ipoctal.h
@@ -0,0 +1,42 @@
+/**
+ * ipoctal.h
+ *
+ * driver for the IPOCTAL boards
+
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef _IPOCTAL_H_
+#define _IPOCTAL_H_
+
+#define NR_CHANNELS 8
+#define IPOCTAL_MAX_BOARDS 16
+#define MAX_DEVICES (NR_CHANNELS * IPOCTAL_MAX_BOARDS)
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * struct ipoctal_stats -- Stats since last reset
+ *
+ * @tx: Number of transmitted bytes
+ * @rx: Number of received bytes
+ * @overrun: Number of overrun errors
+ * @parity_err: Number of parity errors
+ * @framing_err: Number of framing errors
+ * @rcv_break: Number of break received
+ */
+struct ipoctal_stats {
+ unsigned long tx;
+ unsigned long rx;
+ unsigned long overrun_err;
+ unsigned long parity_err;
+ unsigned long framing_err;
+ unsigned long rcv_break;
+};
+
+#endif /* _IPOCTAL_H_ */
diff --git a/drivers/ipack/devices/scc2698.h b/drivers/ipack/devices/scc2698.h
new file mode 100644
index 000000000..2ad6acd51
--- /dev/null
+++ b/drivers/ipack/devices/scc2698.h
@@ -0,0 +1,228 @@
+/*
+ * scc2698.h
+ *
+ * driver for the IPOCTAL boards
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef SCC2698_H_
+#define SCC2698_H_
+
+/*
+ * union scc2698_channel - Channel access to scc2698 IO
+ *
+ * dn value are only spacer.
+ *
+ */
+union scc2698_channel {
+ struct {
+ u8 d0, mr; /* Mode register 1/2*/
+ u8 d1, sr; /* Status register */
+ u8 d2, r1; /* reserved */
+ u8 d3, rhr; /* Receive holding register (R) */
+ u8 junk[8]; /* other crap for block control */
+ } __packed r; /* Read access */
+ struct {
+ u8 d0, mr; /* Mode register 1/2 */
+ u8 d1, csr; /* Clock select register */
+ u8 d2, cr; /* Command register */
+ u8 d3, thr; /* Transmit holding register */
+ u8 junk[8]; /* other crap for block control */
+ } __packed w; /* Write access */
+};
+
+/*
+ * union scc2698_block - Block access to scc2698 IO
+ *
+ * The scc2698 contain 4 block.
+ * Each block containt two channel a and b.
+ * dn value are only spacer.
+ *
+ */
+union scc2698_block {
+ struct {
+ u8 d0, mra; /* Mode register 1/2 (a) */
+ u8 d1, sra; /* Status register (a) */
+ u8 d2, r1; /* reserved */
+ u8 d3, rhra; /* Receive holding register (a) */
+ u8 d4, ipcr; /* Input port change register of block */
+ u8 d5, isr; /* Interrupt status register of block */
+ u8 d6, ctur; /* Counter timer upper register of block */
+ u8 d7, ctlr; /* Counter timer lower register of block */
+ u8 d8, mrb; /* Mode register 1/2 (b) */
+ u8 d9, srb; /* Status register (b) */
+ u8 da, r2; /* reserved */
+ u8 db, rhrb; /* Receive holding register (b) */
+ u8 dc, r3; /* reserved */
+ u8 dd, ip; /* Input port register of block */
+ u8 de, ctg; /* Start counter timer of block */
+ u8 df, cts; /* Stop counter timer of block */
+ } __packed r; /* Read access */
+ struct {
+ u8 d0, mra; /* Mode register 1/2 (a) */
+ u8 d1, csra; /* Clock select register (a) */
+ u8 d2, cra; /* Command register (a) */
+ u8 d3, thra; /* Transmit holding register (a) */
+ u8 d4, acr; /* Auxiliary control register of block */
+ u8 d5, imr; /* Interrupt mask register of block */
+ u8 d6, ctu; /* Counter timer upper register of block */
+ u8 d7, ctl; /* Counter timer lower register of block */
+ u8 d8, mrb; /* Mode register 1/2 (b) */
+ u8 d9, csrb; /* Clock select register (a) */
+ u8 da, crb; /* Command register (b) */
+ u8 db, thrb; /* Transmit holding register (b) */
+ u8 dc, r1; /* reserved */
+ u8 dd, opcr; /* Output port configuration register of block */
+ u8 de, r2; /* reserved */
+ u8 df, r3; /* reserved */
+ } __packed w; /* Write access */
+};
+
+#define MR1_CHRL_5_BITS (0x0 << 0)
+#define MR1_CHRL_6_BITS (0x1 << 0)
+#define MR1_CHRL_7_BITS (0x2 << 0)
+#define MR1_CHRL_8_BITS (0x3 << 0)
+#define MR1_PARITY_EVEN (0x1 << 2)
+#define MR1_PARITY_ODD (0x0 << 2)
+#define MR1_PARITY_ON (0x0 << 3)
+#define MR1_PARITY_FORCE (0x1 << 3)
+#define MR1_PARITY_OFF (0x2 << 3)
+#define MR1_PARITY_SPECIAL (0x3 << 3)
+#define MR1_ERROR_CHAR (0x0 << 5)
+#define MR1_ERROR_BLOCK (0x1 << 5)
+#define MR1_RxINT_RxRDY (0x0 << 6)
+#define MR1_RxINT_FFULL (0x1 << 6)
+#define MR1_RxRTS_CONTROL_ON (0x1 << 7)
+#define MR1_RxRTS_CONTROL_OFF (0x0 << 7)
+
+#define MR2_STOP_BITS_LENGTH_1 (0x7 << 0)
+#define MR2_STOP_BITS_LENGTH_2 (0xF << 0)
+#define MR2_CTS_ENABLE_TX_ON (0x1 << 4)
+#define MR2_CTS_ENABLE_TX_OFF (0x0 << 4)
+#define MR2_TxRTS_CONTROL_ON (0x1 << 5)
+#define MR2_TxRTS_CONTROL_OFF (0x0 << 5)
+#define MR2_CH_MODE_NORMAL (0x0 << 6)
+#define MR2_CH_MODE_ECHO (0x1 << 6)
+#define MR2_CH_MODE_LOCAL (0x2 << 6)
+#define MR2_CH_MODE_REMOTE (0x3 << 6)
+
+#define CR_ENABLE_RX (0x1 << 0)
+#define CR_DISABLE_RX (0x1 << 1)
+#define CR_ENABLE_TX (0x1 << 2)
+#define CR_DISABLE_TX (0x1 << 3)
+#define CR_CMD_RESET_MR (0x1 << 4)
+#define CR_CMD_RESET_RX (0x2 << 4)
+#define CR_CMD_RESET_TX (0x3 << 4)
+#define CR_CMD_RESET_ERR_STATUS (0x4 << 4)
+#define CR_CMD_RESET_BREAK_CHANGE (0x5 << 4)
+#define CR_CMD_START_BREAK (0x6 << 4)
+#define CR_CMD_STOP_BREAK (0x7 << 4)
+#define CR_CMD_ASSERT_RTSN (0x8 << 4)
+#define CR_CMD_NEGATE_RTSN (0x9 << 4)
+#define CR_CMD_SET_TIMEOUT_MODE (0xA << 4)
+#define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4)
+
+#define SR_RX_READY (0x1 << 0)
+#define SR_FIFO_FULL (0x1 << 1)
+#define SR_TX_READY (0x1 << 2)
+#define SR_TX_EMPTY (0x1 << 3)
+#define SR_OVERRUN_ERROR (0x1 << 4)
+#define SR_PARITY_ERROR (0x1 << 5)
+#define SR_FRAMING_ERROR (0x1 << 6)
+#define SR_RECEIVED_BREAK (0x1 << 7)
+
+#define SR_ERROR (0xF0)
+
+#define ACR_DELTA_IP0_IRQ_EN (0x1 << 0)
+#define ACR_DELTA_IP1_IRQ_EN (0x1 << 1)
+#define ACR_DELTA_IP2_IRQ_EN (0x1 << 2)
+#define ACR_DELTA_IP3_IRQ_EN (0x1 << 3)
+#define ACR_CT_Mask (0x7 << 4)
+#define ACR_CExt (0x0 << 4)
+#define ACR_CTxCA (0x1 << 4)
+#define ACR_CTxCB (0x2 << 4)
+#define ACR_CClk16 (0x3 << 4)
+#define ACR_TExt (0x4 << 4)
+#define ACR_TExt16 (0x5 << 4)
+#define ACR_TClk (0x6 << 4)
+#define ACR_TClk16 (0x7 << 4)
+#define ACR_BRG_SET1 (0x0 << 7)
+#define ACR_BRG_SET2 (0x1 << 7)
+
+#define TX_CLK_75 (0x0 << 0)
+#define TX_CLK_110 (0x1 << 0)
+#define TX_CLK_38400 (0x2 << 0)
+#define TX_CLK_150 (0x3 << 0)
+#define TX_CLK_300 (0x4 << 0)
+#define TX_CLK_600 (0x5 << 0)
+#define TX_CLK_1200 (0x6 << 0)
+#define TX_CLK_2000 (0x7 << 0)
+#define TX_CLK_2400 (0x8 << 0)
+#define TX_CLK_4800 (0x9 << 0)
+#define TX_CLK_1800 (0xA << 0)
+#define TX_CLK_9600 (0xB << 0)
+#define TX_CLK_19200 (0xC << 0)
+#define RX_CLK_75 (0x0 << 4)
+#define RX_CLK_110 (0x1 << 4)
+#define RX_CLK_38400 (0x2 << 4)
+#define RX_CLK_150 (0x3 << 4)
+#define RX_CLK_300 (0x4 << 4)
+#define RX_CLK_600 (0x5 << 4)
+#define RX_CLK_1200 (0x6 << 4)
+#define RX_CLK_2000 (0x7 << 4)
+#define RX_CLK_2400 (0x8 << 4)
+#define RX_CLK_4800 (0x9 << 4)
+#define RX_CLK_1800 (0xA << 4)
+#define RX_CLK_9600 (0xB << 4)
+#define RX_CLK_19200 (0xC << 4)
+
+#define OPCR_MPOa_RTSN (0x0 << 0)
+#define OPCR_MPOa_C_TO (0x1 << 0)
+#define OPCR_MPOa_TxC1X (0x2 << 0)
+#define OPCR_MPOa_TxC16X (0x3 << 0)
+#define OPCR_MPOa_RxC1X (0x4 << 0)
+#define OPCR_MPOa_RxC16X (0x5 << 0)
+#define OPCR_MPOa_TxRDY (0x6 << 0)
+#define OPCR_MPOa_RxRDY_FF (0x7 << 0)
+
+#define OPCR_MPOb_RTSN (0x0 << 4)
+#define OPCR_MPOb_C_TO (0x1 << 4)
+#define OPCR_MPOb_TxC1X (0x2 << 4)
+#define OPCR_MPOb_TxC16X (0x3 << 4)
+#define OPCR_MPOb_RxC1X (0x4 << 4)
+#define OPCR_MPOb_RxC16X (0x5 << 4)
+#define OPCR_MPOb_TxRDY (0x6 << 4)
+#define OPCR_MPOb_RxRDY_FF (0x7 << 4)
+
+#define OPCR_MPP_INPUT (0x0 << 7)
+#define OPCR_MPP_OUTPUT (0x1 << 7)
+
+#define IMR_TxRDY_A (0x1 << 0)
+#define IMR_RxRDY_FFULL_A (0x1 << 1)
+#define IMR_DELTA_BREAK_A (0x1 << 2)
+#define IMR_COUNTER_READY (0x1 << 3)
+#define IMR_TxRDY_B (0x1 << 4)
+#define IMR_RxRDY_FFULL_B (0x1 << 5)
+#define IMR_DELTA_BREAK_B (0x1 << 6)
+#define IMR_INPUT_PORT_CHANGE (0x1 << 7)
+
+#define ISR_TxRDY_A (0x1 << 0)
+#define ISR_RxRDY_FFULL_A (0x1 << 1)
+#define ISR_DELTA_BREAK_A (0x1 << 2)
+#define ISR_COUNTER_READY (0x1 << 3)
+#define ISR_TxRDY_B (0x1 << 4)
+#define ISR_RxRDY_FFULL_B (0x1 << 5)
+#define ISR_DELTA_BREAK_B (0x1 << 6)
+#define ISR_INPUT_PORT_CHANGE (0x1 << 7)
+
+#define ACK_INT_REQ0 0
+#define ACK_INT_REQ1 2
+
+#endif /* SCC2698_H_ */
diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c
new file mode 100644
index 000000000..a1e07a77d
--- /dev/null
+++ b/drivers/ipack/ipack.c
@@ -0,0 +1,506 @@
+/*
+ * Industry-pack bus support functions.
+ *
+ * Copyright (C) 2011-2012 CERN (www.cern.ch)
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/io.h>
+#include <linux/ipack.h>
+
+#define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
+#define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
+
+static DEFINE_IDA(ipack_ida);
+
+static void ipack_device_release(struct device *dev)
+{
+ struct ipack_device *device = to_ipack_dev(dev);
+ kfree(device->id);
+ device->release(device);
+}
+
+static inline const struct ipack_device_id *
+ipack_match_one_device(const struct ipack_device_id *id,
+ const struct ipack_device *device)
+{
+ if ((id->format == IPACK_ANY_FORMAT ||
+ id->format == device->id_format) &&
+ (id->vendor == IPACK_ANY_ID || id->vendor == device->id_vendor) &&
+ (id->device == IPACK_ANY_ID || id->device == device->id_device))
+ return id;
+ return NULL;
+}
+
+static const struct ipack_device_id *
+ipack_match_id(const struct ipack_device_id *ids, struct ipack_device *idev)
+{
+ if (ids) {
+ while (ids->vendor || ids->device) {
+ if (ipack_match_one_device(ids, idev))
+ return ids;
+ ids++;
+ }
+ }
+ return NULL;
+}
+
+static int ipack_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct ipack_device *idev = to_ipack_dev(dev);
+ struct ipack_driver *idrv = to_ipack_driver(drv);
+ const struct ipack_device_id *found_id;
+
+ found_id = ipack_match_id(idrv->id_table, idev);
+ return found_id ? 1 : 0;
+}
+
+static int ipack_bus_probe(struct device *device)
+{
+ struct ipack_device *dev = to_ipack_dev(device);
+ struct ipack_driver *drv = to_ipack_driver(device->driver);
+
+ if (!drv->ops->probe)
+ return -EINVAL;
+
+ return drv->ops->probe(dev);
+}
+
+static int ipack_bus_remove(struct device *device)
+{
+ struct ipack_device *dev = to_ipack_dev(device);
+ struct ipack_driver *drv = to_ipack_driver(device->driver);
+
+ if (!drv->ops->remove)
+ return -EINVAL;
+
+ drv->ops->remove(dev);
+ return 0;
+}
+
+static int ipack_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct ipack_device *idev;
+
+ if (!dev)
+ return -ENODEV;
+
+ idev = to_ipack_dev(dev);
+
+ if (add_uevent_var(env,
+ "MODALIAS=ipack:f%02Xv%08Xd%08X", idev->id_format,
+ idev->id_vendor, idev->id_device))
+ return -ENOMEM;
+
+ return 0;
+}
+
+#define ipack_device_attr(field, format_string) \
+static ssize_t \
+field##_show(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct ipack_device *idev = to_ipack_dev(dev); \
+ return sprintf(buf, format_string, idev->field); \
+}
+
+static ssize_t id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned int i, c, l, s;
+ struct ipack_device *idev = to_ipack_dev(dev);
+
+
+ switch (idev->id_format) {
+ case IPACK_ID_VERSION_1:
+ l = 0x7; s = 1; break;
+ case IPACK_ID_VERSION_2:
+ l = 0xf; s = 2; break;
+ default:
+ return -EIO;
+ }
+ c = 0;
+ for (i = 0; i < idev->id_avail; i++) {
+ if (i > 0) {
+ if ((i & l) == 0)
+ buf[c++] = '\n';
+ else if ((i & s) == 0)
+ buf[c++] = ' ';
+ }
+ sprintf(&buf[c], "%02x", idev->id[i]);
+ c += 2;
+ }
+ buf[c++] = '\n';
+ return c;
+}
+
+static ssize_t
+id_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct ipack_device *idev = to_ipack_dev(dev);
+ switch (idev->id_format) {
+ case IPACK_ID_VERSION_1:
+ return sprintf(buf, "0x%02x\n", idev->id_vendor);
+ case IPACK_ID_VERSION_2:
+ return sprintf(buf, "0x%06x\n", idev->id_vendor);
+ default:
+ return -EIO;
+ }
+}
+
+static ssize_t
+id_device_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct ipack_device *idev = to_ipack_dev(dev);
+ switch (idev->id_format) {
+ case IPACK_ID_VERSION_1:
+ return sprintf(buf, "0x%02x\n", idev->id_device);
+ case IPACK_ID_VERSION_2:
+ return sprintf(buf, "0x%04x\n", idev->id_device);
+ default:
+ return -EIO;
+ }
+}
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ipack_device *idev = to_ipack_dev(dev);
+
+ return sprintf(buf, "ipac:f%02Xv%08Xd%08X", idev->id_format,
+ idev->id_vendor, idev->id_device);
+}
+
+ipack_device_attr(id_format, "0x%hhx\n");
+
+static DEVICE_ATTR_RO(id);
+static DEVICE_ATTR_RO(id_device);
+static DEVICE_ATTR_RO(id_format);
+static DEVICE_ATTR_RO(id_vendor);
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ipack_attrs[] = {
+ &dev_attr_id.attr,
+ &dev_attr_id_device.attr,
+ &dev_attr_id_format.attr,
+ &dev_attr_id_vendor.attr,
+ &dev_attr_modalias.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ipack);
+
+static struct bus_type ipack_bus_type = {
+ .name = "ipack",
+ .probe = ipack_bus_probe,
+ .match = ipack_bus_match,
+ .remove = ipack_bus_remove,
+ .dev_groups = ipack_groups,
+ .uevent = ipack_uevent,
+};
+
+struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
+ const struct ipack_bus_ops *ops,
+ struct module *owner)
+{
+ int bus_nr;
+ struct ipack_bus_device *bus;
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return NULL;
+
+ bus_nr = ida_simple_get(&ipack_ida, 0, 0, GFP_KERNEL);
+ if (bus_nr < 0) {
+ kfree(bus);
+ return NULL;
+ }
+
+ bus->bus_nr = bus_nr;
+ bus->parent = parent;
+ bus->slots = slots;
+ bus->ops = ops;
+ bus->owner = owner;
+ return bus;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_register);
+
+static int ipack_unregister_bus_member(struct device *dev, void *data)
+{
+ struct ipack_device *idev = to_ipack_dev(dev);
+ struct ipack_bus_device *bus = data;
+
+ if (idev->bus == bus)
+ ipack_device_del(idev);
+
+ return 1;
+}
+
+int ipack_bus_unregister(struct ipack_bus_device *bus)
+{
+ bus_for_each_dev(&ipack_bus_type, NULL, bus,
+ ipack_unregister_bus_member);
+ ida_simple_remove(&ipack_ida, bus->bus_nr);
+ kfree(bus);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_unregister);
+
+int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
+ const char *name)
+{
+ edrv->driver.owner = owner;
+ edrv->driver.name = name;
+ edrv->driver.bus = &ipack_bus_type;
+ return driver_register(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_register);
+
+void ipack_driver_unregister(struct ipack_driver *edrv)
+{
+ driver_unregister(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_unregister);
+
+static u16 ipack_crc_byte(u16 crc, u8 c)
+{
+ int i;
+
+ crc ^= c << 8;
+ for (i = 0; i < 8; i++)
+ crc = (crc << 1) ^ ((crc & 0x8000) ? 0x1021 : 0);
+ return crc;
+}
+
+/*
+ * The algorithm in lib/crc-ccitt.c does not seem to apply since it uses the
+ * opposite bit ordering.
+ */
+static u8 ipack_calc_crc1(struct ipack_device *dev)
+{
+ u8 c;
+ u16 crc;
+ unsigned int i;
+
+ crc = 0xffff;
+ for (i = 0; i < dev->id_avail; i++) {
+ c = (i != 11) ? dev->id[i] : 0;
+ crc = ipack_crc_byte(crc, c);
+ }
+ crc = ~crc;
+ return crc & 0xff;
+}
+
+static u16 ipack_calc_crc2(struct ipack_device *dev)
+{
+ u8 c;
+ u16 crc;
+ unsigned int i;
+
+ crc = 0xffff;
+ for (i = 0; i < dev->id_avail; i++) {
+ c = ((i != 0x18) && (i != 0x19)) ? dev->id[i] : 0;
+ crc = ipack_crc_byte(crc, c);
+ }
+ crc = ~crc;
+ return crc;
+}
+
+static void ipack_parse_id1(struct ipack_device *dev)
+{
+ u8 *id = dev->id;
+ u8 crc;
+
+ dev->id_vendor = id[4];
+ dev->id_device = id[5];
+ dev->speed_8mhz = 1;
+ dev->speed_32mhz = (id[7] == 'H');
+ crc = ipack_calc_crc1(dev);
+ dev->id_crc_correct = (crc == id[11]);
+ if (!dev->id_crc_correct) {
+ dev_warn(&dev->dev, "ID CRC invalid found 0x%x, expected 0x%x.\n",
+ id[11], crc);
+ }
+}
+
+static void ipack_parse_id2(struct ipack_device *dev)
+{
+ __be16 *id = (__be16 *) dev->id;
+ u16 flags, crc;
+
+ dev->id_vendor = ((be16_to_cpu(id[3]) & 0xff) << 16)
+ + be16_to_cpu(id[4]);
+ dev->id_device = be16_to_cpu(id[5]);
+ flags = be16_to_cpu(id[10]);
+ dev->speed_8mhz = !!(flags & 2);
+ dev->speed_32mhz = !!(flags & 4);
+ crc = ipack_calc_crc2(dev);
+ dev->id_crc_correct = (crc == be16_to_cpu(id[12]));
+ if (!dev->id_crc_correct) {
+ dev_warn(&dev->dev, "ID CRC invalid found 0x%x, expected 0x%x.\n",
+ id[11], crc);
+ }
+}
+
+static int ipack_device_read_id(struct ipack_device *dev)
+{
+ u8 __iomem *idmem;
+ int i;
+ int ret = 0;
+
+ idmem = ioremap(dev->region[IPACK_ID_SPACE].start,
+ dev->region[IPACK_ID_SPACE].size);
+ if (!idmem) {
+ dev_err(&dev->dev, "error mapping memory\n");
+ return -ENOMEM;
+ }
+
+ /* Determine ID PROM Data Format. If we find the ids "IPAC" or "IPAH"
+ * we are dealing with a IndustryPack format 1 device. If we detect
+ * "VITA4 " (16 bit big endian formatted) we are dealing with a
+ * IndustryPack format 2 device */
+ if ((ioread8(idmem + 1) == 'I') &&
+ (ioread8(idmem + 3) == 'P') &&
+ (ioread8(idmem + 5) == 'A') &&
+ ((ioread8(idmem + 7) == 'C') ||
+ (ioread8(idmem + 7) == 'H'))) {
+ dev->id_format = IPACK_ID_VERSION_1;
+ dev->id_avail = ioread8(idmem + 0x15);
+ if ((dev->id_avail < 0x0c) || (dev->id_avail > 0x40)) {
+ dev_warn(&dev->dev, "invalid id size");
+ dev->id_avail = 0x0c;
+ }
+ } else if ((ioread8(idmem + 0) == 'I') &&
+ (ioread8(idmem + 1) == 'V') &&
+ (ioread8(idmem + 2) == 'A') &&
+ (ioread8(idmem + 3) == 'T') &&
+ (ioread8(idmem + 4) == ' ') &&
+ (ioread8(idmem + 5) == '4')) {
+ dev->id_format = IPACK_ID_VERSION_2;
+ dev->id_avail = ioread16be(idmem + 0x16);
+ if ((dev->id_avail < 0x1a) || (dev->id_avail > 0x40)) {
+ dev_warn(&dev->dev, "invalid id size");
+ dev->id_avail = 0x1a;
+ }
+ } else {
+ dev->id_format = IPACK_ID_VERSION_INVALID;
+ dev->id_avail = 0;
+ }
+
+ if (!dev->id_avail) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Obtain the amount of memory required to store a copy of the complete
+ * ID ROM contents */
+ dev->id = kmalloc(dev->id_avail, GFP_KERNEL);
+ if (!dev->id) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ for (i = 0; i < dev->id_avail; i++) {
+ if (dev->id_format == IPACK_ID_VERSION_1)
+ dev->id[i] = ioread8(idmem + (i << 1) + 1);
+ else
+ dev->id[i] = ioread8(idmem + i);
+ }
+
+ /* now we can finally work with the copy */
+ switch (dev->id_format) {
+ case IPACK_ID_VERSION_1:
+ ipack_parse_id1(dev);
+ break;
+ case IPACK_ID_VERSION_2:
+ ipack_parse_id2(dev);
+ break;
+ }
+
+out:
+ iounmap(idmem);
+
+ return ret;
+}
+
+int ipack_device_init(struct ipack_device *dev)
+{
+ int ret;
+
+ dev->dev.bus = &ipack_bus_type;
+ dev->dev.release = ipack_device_release;
+ dev->dev.parent = dev->bus->parent;
+ dev_set_name(&dev->dev,
+ "ipack-dev.%u.%u", dev->bus->bus_nr, dev->slot);
+ device_initialize(&dev->dev);
+
+ if (dev->bus->ops->set_clockrate(dev, 8))
+ dev_warn(&dev->dev, "failed to switch to 8 MHz operation for reading of device ID.\n");
+ if (dev->bus->ops->reset_timeout(dev))
+ dev_warn(&dev->dev, "failed to reset potential timeout.");
+
+ ret = ipack_device_read_id(dev);
+ if (ret < 0) {
+ dev_err(&dev->dev, "error reading device id section.\n");
+ return ret;
+ }
+
+ /* if the device supports 32 MHz operation, use it. */
+ if (dev->speed_32mhz) {
+ ret = dev->bus->ops->set_clockrate(dev, 32);
+ if (ret < 0)
+ dev_err(&dev->dev, "failed to switch to 32 MHz operation.\n");
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ipack_device_init);
+
+int ipack_device_add(struct ipack_device *dev)
+{
+ return device_add(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(ipack_device_add);
+
+void ipack_device_del(struct ipack_device *dev)
+{
+ device_del(&dev->dev);
+ ipack_put_device(dev);
+}
+EXPORT_SYMBOL_GPL(ipack_device_del);
+
+void ipack_get_device(struct ipack_device *dev)
+{
+ get_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(ipack_get_device);
+
+void ipack_put_device(struct ipack_device *dev)
+{
+ put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(ipack_put_device);
+
+static int __init ipack_init(void)
+{
+ ida_init(&ipack_ida);
+ return bus_register(&ipack_bus_type);
+}
+
+static void __exit ipack_exit(void)
+{
+ bus_unregister(&ipack_bus_type);
+ ida_destroy(&ipack_ida);
+}
+
+module_init(ipack_init);
+module_exit(ipack_exit);
+
+MODULE_AUTHOR("Samuel Iglesias Gonsalvez <siglesias@igalia.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Industry-pack bus core");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 13:15:52 +0000