diff options
Diffstat (limited to 'drivers/irqchip/irq-mxs.c')
-rw-r--r-- | drivers/irqchip/irq-mxs.c | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c new file mode 100644 index 000000000..e8b31f52e --- /dev/null +++ b/drivers/irqchip/irq-mxs.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de> + * Add Alphascale ASM9260 support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/stmp_device.h> +#include <asm/exception.h> + +#include "alphascale_asm9260-icoll.h" + +/* + * this device provide 4 offsets for each register: + * 0x0 - plain read write mode + * 0x4 - set mode, OR logic. + * 0x8 - clr mode, XOR logic. + * 0xc - togle mode. + */ +#define SET_REG 4 +#define CLR_REG 8 + +#define HW_ICOLL_VECTOR 0x0000 +#define HW_ICOLL_LEVELACK 0x0010 +#define HW_ICOLL_CTRL 0x0020 +#define HW_ICOLL_STAT_OFFSET 0x0070 +#define HW_ICOLL_INTERRUPT0 0x0120 +#define HW_ICOLL_INTERRUPTn(n) ((n) * 0x10) +#define BM_ICOLL_INTR_ENABLE BIT(2) +#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1 + +#define ICOLL_NUM_IRQS 128 + +enum icoll_type { + ICOLL, + ASM9260_ICOLL, +}; + +struct icoll_priv { + void __iomem *vector; + void __iomem *levelack; + void __iomem *ctrl; + void __iomem *stat; + void __iomem *intr; + void __iomem *clear; + enum icoll_type type; +}; + +static struct icoll_priv icoll_priv; +static struct irq_domain *icoll_domain; + +/* calculate bit offset depending on number of intterupt per register */ +static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit) +{ + /* + * mask lower part of hwirq to convert it + * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3) + */ + return bit << ((d->hwirq & 3) << 3); +} + +/* calculate mem offset depending on number of intterupt per register */ +static void __iomem *icoll_intr_reg(struct irq_data *d) +{ + /* offset = hwirq / intr_per_reg * 0x10 */ + return icoll_priv.intr + ((d->hwirq >> 2) * 0x10); +} + +static void icoll_ack_irq(struct irq_data *d) +{ + /* + * The Interrupt Collector is able to prioritize irqs. + * Currently only level 0 is used. So acking can use + * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally. + */ + __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0, + icoll_priv.levelack); +} + +static void icoll_mask_irq(struct irq_data *d) +{ + __raw_writel(BM_ICOLL_INTR_ENABLE, + icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq)); +} + +static void icoll_unmask_irq(struct irq_data *d) +{ + __raw_writel(BM_ICOLL_INTR_ENABLE, + icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq)); +} + +static void asm9260_mask_irq(struct irq_data *d) +{ + __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE), + icoll_intr_reg(d) + CLR_REG); +} + +static void asm9260_unmask_irq(struct irq_data *d) +{ + __raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq), + icoll_priv.clear + + ASM9260_HW_ICOLL_CLEARn(d->hwirq)); + + __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE), + icoll_intr_reg(d) + SET_REG); +} + +static struct irq_chip mxs_icoll_chip = { + .irq_ack = icoll_ack_irq, + .irq_mask = icoll_mask_irq, + .irq_unmask = icoll_unmask_irq, + .flags = IRQCHIP_MASK_ON_SUSPEND | + IRQCHIP_SKIP_SET_WAKE, +}; + +static struct irq_chip asm9260_icoll_chip = { + .irq_ack = icoll_ack_irq, + .irq_mask = asm9260_mask_irq, + .irq_unmask = asm9260_unmask_irq, + .flags = IRQCHIP_MASK_ON_SUSPEND | + IRQCHIP_SKIP_SET_WAKE, +}; + +asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + + irqnr = __raw_readl(icoll_priv.stat); + __raw_writel(irqnr, icoll_priv.vector); + handle_domain_irq(icoll_domain, irqnr, regs); +} + +static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + struct irq_chip *chip; + + if (icoll_priv.type == ICOLL) + chip = &mxs_icoll_chip; + else + chip = &asm9260_icoll_chip; + + irq_set_chip_and_handler(virq, chip, handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops icoll_irq_domain_ops = { + .map = icoll_irq_domain_map, + .xlate = irq_domain_xlate_onecell, +}; + +static void __init icoll_add_domain(struct device_node *np, + int num) +{ + icoll_domain = irq_domain_add_linear(np, num, + &icoll_irq_domain_ops, NULL); + + if (!icoll_domain) + panic("%pOF: unable to create irq domain", np); +} + +static void __iomem * __init icoll_init_iobase(struct device_node *np) +{ + void __iomem *icoll_base; + + icoll_base = of_io_request_and_map(np, 0, np->name); + if (IS_ERR(icoll_base)) + panic("%pOF: unable to map resource", np); + return icoll_base; +} + +static int __init icoll_of_init(struct device_node *np, + struct device_node *interrupt_parent) +{ + void __iomem *icoll_base; + + icoll_priv.type = ICOLL; + + icoll_base = icoll_init_iobase(np); + icoll_priv.vector = icoll_base + HW_ICOLL_VECTOR; + icoll_priv.levelack = icoll_base + HW_ICOLL_LEVELACK; + icoll_priv.ctrl = icoll_base + HW_ICOLL_CTRL; + icoll_priv.stat = icoll_base + HW_ICOLL_STAT_OFFSET; + icoll_priv.intr = icoll_base + HW_ICOLL_INTERRUPT0; + icoll_priv.clear = NULL; + + /* + * Interrupt Collector reset, which initializes the priority + * for each irq to level 0. + */ + stmp_reset_block(icoll_priv.ctrl); + + icoll_add_domain(np, ICOLL_NUM_IRQS); + + return 0; +} +IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init); + +static int __init asm9260_of_init(struct device_node *np, + struct device_node *interrupt_parent) +{ + void __iomem *icoll_base; + int i; + + icoll_priv.type = ASM9260_ICOLL; + + icoll_base = icoll_init_iobase(np); + icoll_priv.vector = icoll_base + ASM9260_HW_ICOLL_VECTOR; + icoll_priv.levelack = icoll_base + ASM9260_HW_ICOLL_LEVELACK; + icoll_priv.ctrl = icoll_base + ASM9260_HW_ICOLL_CTRL; + icoll_priv.stat = icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET; + icoll_priv.intr = icoll_base + ASM9260_HW_ICOLL_INTERRUPT0; + icoll_priv.clear = icoll_base + ASM9260_HW_ICOLL_CLEAR0; + + writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE, + icoll_priv.ctrl); + /* + * ASM9260 don't provide reset bit. So, we need to set level 0 + * manually. + */ + for (i = 0; i < 16 * 0x10; i += 0x10) + writel(0, icoll_priv.intr + i); + + icoll_add_domain(np, ASM9260_NUM_IRQS); + set_handle_irq(icoll_handle_irq); + + return 0; +} +IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init); |