1 files changed, 261 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
new file mode 100644
index 000000000..767cdd3f7
--- /dev/null
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 SiFive
+ * Copyright (C) 2018 Christoph Hellwig
+ */
+#define pr_fmt(fmt) "plic: " fmt
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/*
+ * This driver implements a version of the RISC-V PLIC with the actual layout
+ * specified in chapter 8 of the SiFive U5 Coreplex Series Manual:
+ *
+ *     https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
+ *
+ * The largest number supported by devices marked as 'sifive,plic-1.0.0', is
+ * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
+ * Spec.
+ */
+
+#define MAX_DEVICES			1024
+#define MAX_CONTEXTS			15872
+
+/*
+ * Each interrupt source has a priority register associated with it.
+ * We always hardwire it to one in Linux.
+ */
+#define PRIORITY_BASE			0
+#define     PRIORITY_PER_ID		4
+
+/*
+ * Each hart context has a vector of interrupt enable bits associated with it.
+ * There's one bit for each interrupt source.
+ */
+#define ENABLE_BASE			0x2000
+#define     ENABLE_PER_HART		0x80
+
+/*
+ * Each hart context has a set of control registers associated with it.  Right
+ * now there's only two: a source priority threshold over which the hart will
+ * take an interrupt, and a register to claim interrupts.
+ */
+#define CONTEXT_BASE			0x200000
+#define     CONTEXT_PER_HART		0x1000
+#define     CONTEXT_THRESHOLD		0x00
+#define     CONTEXT_CLAIM		0x04
+
+static void __iomem *plic_regs;
+
+struct plic_handler {
+	bool			present;
+	int			ctxid;
+};
+static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
+
+static inline void __iomem *plic_hart_offset(int ctxid)
+{
+	return plic_regs + CONTEXT_BASE + ctxid * CONTEXT_PER_HART;
+}
+
+static inline u32 __iomem *plic_enable_base(int ctxid)
+{
+	return plic_regs + ENABLE_BASE + ctxid * ENABLE_PER_HART;
+}
+
+/*
+ * Protect mask operations on the registers given that we can't assume that
+ * atomic memory operations work on them.
+ */
+static DEFINE_RAW_SPINLOCK(plic_toggle_lock);
+
+static inline void plic_toggle(int ctxid, int hwirq, int enable)
+{
+	u32 __iomem *reg = plic_enable_base(ctxid) + (hwirq / 32);
+	u32 hwirq_mask = 1 << (hwirq % 32);
+
+	raw_spin_lock(&plic_toggle_lock);
+	if (enable)
+		writel(readl(reg) | hwirq_mask, reg);
+	else
+		writel(readl(reg) & ~hwirq_mask, reg);
+	raw_spin_unlock(&plic_toggle_lock);
+}
+
+static inline void plic_irq_toggle(struct irq_data *d, int enable)
+{
+	int cpu;
+
+	writel(enable, plic_regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
+	for_each_cpu(cpu, irq_data_get_affinity_mask(d)) {
+		struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
+
+		if (handler->present)
+			plic_toggle(handler->ctxid, d->hwirq, enable);
+	}
+}
+
+static void plic_irq_enable(struct irq_data *d)
+{
+	plic_irq_toggle(d, 1);
+}
+
+static void plic_irq_disable(struct irq_data *d)
+{
+	plic_irq_toggle(d, 0);
+}
+
+static struct irq_chip plic_chip = {
+	.name		= "SiFive PLIC",
+	/*
+	 * There is no need to mask/unmask PLIC interrupts.  They are "masked"
+	 * by reading claim and "unmasked" when writing it back.
+	 */
+	.irq_enable	= plic_irq_enable,
+	.irq_disable	= plic_irq_disable,
+};
+
+static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &plic_chip, handle_simple_irq);
+	irq_set_chip_data(irq, NULL);
+	irq_set_noprobe(irq);
+	return 0;
+}
+
+static const struct irq_domain_ops plic_irqdomain_ops = {
+	.map		= plic_irqdomain_map,
+	.xlate		= irq_domain_xlate_onecell,
+};
+
+static struct irq_domain *plic_irqdomain;
+
+/*
+ * Handling an interrupt is a two-step process: first you claim the interrupt
+ * by reading the claim register, then you complete the interrupt by writing
+ * that source ID back to the same claim register.  This automatically enables
+ * and disables the interrupt, so there's nothing else to do.
+ */
+static void plic_handle_irq(struct pt_regs *regs)
+{
+	struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
+	void __iomem *claim = plic_hart_offset(handler->ctxid) + CONTEXT_CLAIM;
+	irq_hw_number_t hwirq;
+
+	WARN_ON_ONCE(!handler->present);
+
+	csr_clear(sie, SIE_SEIE);
+	while ((hwirq = readl(claim))) {
+		int irq = irq_find_mapping(plic_irqdomain, hwirq);
+
+		if (unlikely(irq <= 0))
+			pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
+					hwirq);
+		else
+			generic_handle_irq(irq);
+		writel(hwirq, claim);
+	}
+	csr_set(sie, SIE_SEIE);
+}
+
+/*
+ * Walk up the DT tree until we find an active RISC-V core (HART) node and
+ * extract the cpuid from it.
+ */
+static int plic_find_hart_id(struct device_node *node)
+{
+	for (; node; node = node->parent) {
+		if (of_device_is_compatible(node, "riscv"))
+			return riscv_of_processor_hart(node);
+	}
+
+	return -1;
+}
+
+static int __init plic_init(struct device_node *node,
+		struct device_node *parent)
+{
+	int error = 0, nr_handlers, nr_mapped = 0, i;
+	u32 nr_irqs;
+
+	if (plic_regs) {
+		pr_warn("PLIC already present.\n");
+		return -ENXIO;
+	}
+
+	plic_regs = of_iomap(node, 0);
+	if (WARN_ON(!plic_regs))
+		return -EIO;
+
+	error = -EINVAL;
+	of_property_read_u32(node, "riscv,ndev", &nr_irqs);
+	if (WARN_ON(!nr_irqs))
+		goto out_iounmap;
+
+	nr_handlers = of_irq_count(node);
+	if (WARN_ON(!nr_handlers))
+		goto out_iounmap;
+	if (WARN_ON(nr_handlers < num_possible_cpus()))
+		goto out_iounmap;
+
+	error = -ENOMEM;
+	plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
+			&plic_irqdomain_ops, NULL);
+	if (WARN_ON(!plic_irqdomain))
+		goto out_iounmap;
+
+	for (i = 0; i < nr_handlers; i++) {
+		struct of_phandle_args parent;
+		struct plic_handler *handler;
+		irq_hw_number_t hwirq;
+		int cpu;
+
+		if (of_irq_parse_one(node, i, &parent)) {
+			pr_err("failed to parse parent for context %d.\n", i);
+			continue;
+		}
+
+		/* skip context holes */
+		if (parent.args[0] == -1)
+			continue;
+
+		cpu = plic_find_hart_id(parent.np);
+		if (cpu < 0) {
+			pr_warn("failed to parse hart ID for context %d.\n", i);
+			continue;
+		}
+
+		handler = per_cpu_ptr(&plic_handlers, cpu);
+		handler->present = true;
+		handler->ctxid = i;
+
+		/* priority must be > threshold to trigger an interrupt */
+		writel(0, plic_hart_offset(i) + CONTEXT_THRESHOLD);
+		for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
+			plic_toggle(i, hwirq, 0);
+		nr_mapped++;
+	}
+
+	pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
+		nr_irqs, nr_mapped, nr_handlers);
+	set_handle_irq(plic_handle_irq);
+	return 0;
+
+out_iounmap:
+	iounmap(plic_regs);
+	return error;
+}
+
+IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
+IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
+IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */