diff options
Diffstat (limited to 'drivers/media/cec/cec-adap.c')
| -rw-r--r-- | drivers/media/cec/cec-adap.c | 2130 |
1 files changed, 2130 insertions, 0 deletions
diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c new file mode 100644 index 000000000..a42043379 --- /dev/null +++ b/drivers/media/cec/cec-adap.c @@ -0,0 +1,2130 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cec-adap.c - HDMI Consumer Electronics Control framework - CEC adapter + * + * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/kmod.h> +#include <linux/ktime.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/types.h> + +#include <drm/drm_edid.h> + +#include "cec-priv.h" + +static void cec_fill_msg_report_features(struct cec_adapter *adap, + struct cec_msg *msg, + unsigned int la_idx); + +/* + * 400 ms is the time it takes for one 16 byte message to be + * transferred and 5 is the maximum number of retries. Add + * another 100 ms as a margin. So if the transmit doesn't + * finish before that time something is really wrong and we + * have to time out. + * + * This is a sign that something it really wrong and a warning + * will be issued. + */ +#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100) + +#define call_op(adap, op, arg...) \ + (adap->ops->op ? adap->ops->op(adap, ## arg) : 0) + +#define call_void_op(adap, op, arg...) \ + do { \ + if (adap->ops->op) \ + adap->ops->op(adap, ## arg); \ + } while (0) + +static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr) +{ + int i; + + for (i = 0; i < adap->log_addrs.num_log_addrs; i++) + if (adap->log_addrs.log_addr[i] == log_addr) + return i; + return -1; +} + +static unsigned int cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr) +{ + int i = cec_log_addr2idx(adap, log_addr); + + return adap->log_addrs.primary_device_type[i < 0 ? 0 : i]; +} + +u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, + unsigned int *offset) +{ + unsigned int loc = cec_get_edid_spa_location(edid, size); + + if (offset) + *offset = loc; + if (loc == 0) + return CEC_PHYS_ADDR_INVALID; + return (edid[loc] << 8) | edid[loc + 1]; +} +EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr); + +/* + * Queue a new event for this filehandle. If ts == 0, then set it + * to the current time. + * + * We keep a queue of at most max_event events where max_event differs + * per event. If the queue becomes full, then drop the oldest event and + * keep track of how many events we've dropped. + */ +void cec_queue_event_fh(struct cec_fh *fh, + const struct cec_event *new_ev, u64 ts) +{ + static const u16 max_events[CEC_NUM_EVENTS] = { + 1, 1, 800, 800, 8, 8, 8, 8 + }; + struct cec_event_entry *entry; + unsigned int ev_idx = new_ev->event - 1; + + if (WARN_ON(ev_idx >= ARRAY_SIZE(fh->events))) + return; + + if (ts == 0) + ts = ktime_get_ns(); + + mutex_lock(&fh->lock); + if (ev_idx < CEC_NUM_CORE_EVENTS) + entry = &fh->core_events[ev_idx]; + else + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (entry) { + if (new_ev->event == CEC_EVENT_LOST_MSGS && + fh->queued_events[ev_idx]) { + entry->ev.lost_msgs.lost_msgs += + new_ev->lost_msgs.lost_msgs; + goto unlock; + } + entry->ev = *new_ev; + entry->ev.ts = ts; + + if (fh->queued_events[ev_idx] < max_events[ev_idx]) { + /* Add new msg at the end of the queue */ + list_add_tail(&entry->list, &fh->events[ev_idx]); + fh->queued_events[ev_idx]++; + fh->total_queued_events++; + goto unlock; + } + + if (ev_idx >= CEC_NUM_CORE_EVENTS) { + list_add_tail(&entry->list, &fh->events[ev_idx]); + /* drop the oldest event */ + entry = list_first_entry(&fh->events[ev_idx], + struct cec_event_entry, list); + list_del(&entry->list); + kfree(entry); + } + } + /* Mark that events were lost */ + entry = list_first_entry_or_null(&fh->events[ev_idx], + struct cec_event_entry, list); + if (entry) + entry->ev.flags |= CEC_EVENT_FL_DROPPED_EVENTS; + +unlock: + mutex_unlock(&fh->lock); + wake_up_interruptible(&fh->wait); +} + +/* Queue a new event for all open filehandles. */ +static void cec_queue_event(struct cec_adapter *adap, + const struct cec_event *ev) +{ + u64 ts = ktime_get_ns(); + struct cec_fh *fh; + + mutex_lock(&adap->devnode.lock); + list_for_each_entry(fh, &adap->devnode.fhs, list) + cec_queue_event_fh(fh, ev, ts); + mutex_unlock(&adap->devnode.lock); +} + +/* Notify userspace that the CEC pin changed state at the given time. */ +void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high, + bool dropped_events, ktime_t ts) +{ + struct cec_event ev = { + .event = is_high ? CEC_EVENT_PIN_CEC_HIGH : + CEC_EVENT_PIN_CEC_LOW, + .flags = dropped_events ? CEC_EVENT_FL_DROPPED_EVENTS : 0, + }; + struct cec_fh *fh; + + mutex_lock(&adap->devnode.lock); + list_for_each_entry(fh, &adap->devnode.fhs, list) + if (fh->mode_follower == CEC_MODE_MONITOR_PIN) + cec_queue_event_fh(fh, &ev, ktime_to_ns(ts)); + mutex_unlock(&adap->devnode.lock); +} +EXPORT_SYMBOL_GPL(cec_queue_pin_cec_event); + +/* Notify userspace that the HPD pin changed state at the given time. */ +void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts) +{ + struct cec_event ev = { + .event = is_high ? CEC_EVENT_PIN_HPD_HIGH : + CEC_EVENT_PIN_HPD_LOW, + }; + struct cec_fh *fh; + + mutex_lock(&adap->devnode.lock); + list_for_each_entry(fh, &adap->devnode.fhs, list) + cec_queue_event_fh(fh, &ev, ktime_to_ns(ts)); + mutex_unlock(&adap->devnode.lock); +} +EXPORT_SYMBOL_GPL(cec_queue_pin_hpd_event); + +/* Notify userspace that the 5V pin changed state at the given time. */ +void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts) +{ + struct cec_event ev = { + .event = is_high ? CEC_EVENT_PIN_5V_HIGH : + CEC_EVENT_PIN_5V_LOW, + }; + struct cec_fh *fh; + + mutex_lock(&adap->devnode.lock); + list_for_each_entry(fh, &adap->devnode.fhs, list) + cec_queue_event_fh(fh, &ev, ktime_to_ns(ts)); + mutex_unlock(&adap->devnode.lock); +} +EXPORT_SYMBOL_GPL(cec_queue_pin_5v_event); + +/* + * Queue a new message for this filehandle. + * + * We keep a queue of at most CEC_MAX_MSG_RX_QUEUE_SZ messages. If the + * queue becomes full, then drop the oldest message and keep track + * of how many messages we've dropped. + */ +static void cec_queue_msg_fh(struct cec_fh *fh, const struct cec_msg *msg) +{ + static const struct cec_event ev_lost_msgs = { + .event = CEC_EVENT_LOST_MSGS, + .flags = 0, + { + .lost_msgs = { 1 }, + }, + }; + struct cec_msg_entry *entry; + + mutex_lock(&fh->lock); + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (entry) { + entry->msg = *msg; + /* Add new msg at the end of the queue */ + list_add_tail(&entry->list, &fh->msgs); + + if (fh->queued_msgs < CEC_MAX_MSG_RX_QUEUE_SZ) { + /* All is fine if there is enough room */ + fh->queued_msgs++; + mutex_unlock(&fh->lock); + wake_up_interruptible(&fh->wait); + return; + } + + /* + * if the message queue is full, then drop the oldest one and + * send a lost message event. + */ + entry = list_first_entry(&fh->msgs, struct cec_msg_entry, list); + list_del(&entry->list); + kfree(entry); + } + mutex_unlock(&fh->lock); + + /* + * We lost a message, either because kmalloc failed or the queue + * was full. + */ + cec_queue_event_fh(fh, &ev_lost_msgs, ktime_get_ns()); +} + +/* + * Queue the message for those filehandles that are in monitor mode. + * If valid_la is true (this message is for us or was sent by us), + * then pass it on to any monitoring filehandle. If this message + * isn't for us or from us, then only give it to filehandles that + * are in MONITOR_ALL mode. + * + * This can only happen if the CEC_CAP_MONITOR_ALL capability is + * set and the CEC adapter was placed in 'monitor all' mode. + */ +static void cec_queue_msg_monitor(struct cec_adapter *adap, + const struct cec_msg *msg, + bool valid_la) +{ + struct cec_fh *fh; + u32 monitor_mode = valid_la ? CEC_MODE_MONITOR : + CEC_MODE_MONITOR_ALL; + + mutex_lock(&adap->devnode.lock); + list_for_each_entry(fh, &adap->devnode.fhs, list) { + if (fh->mode_follower >= monitor_mode) + cec_queue_msg_fh(fh, msg); + } + mutex_unlock(&adap->devnode.lock); +} + +/* + * Queue the message for follower filehandles. + */ +static void cec_queue_msg_followers(struct cec_adapter *adap, + const struct cec_msg *msg) +{ + struct cec_fh *fh; + + mutex_lock(&adap->devnode.lock); + list_for_each_entry(fh, &adap->devnode.fhs, list) { + if (fh->mode_follower == CEC_MODE_FOLLOWER) + cec_queue_msg_fh(fh, msg); + } + mutex_unlock(&adap->devnode.lock); +} + +/* Notify userspace of an adapter state change. */ +static void cec_post_state_event(struct cec_adapter *adap) +{ + struct cec_event ev = { + .event = CEC_EVENT_STATE_CHANGE, + }; + + ev.state_change.phys_addr = adap->phys_addr; + ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask; + cec_queue_event(adap, &ev); +} + +/* + * A CEC transmit (and a possible wait for reply) completed. + * If this was in blocking mode, then complete it, otherwise + * queue the message for userspace to dequeue later. + * + * This function is called with adap->lock held. + */ +static void cec_data_completed(struct cec_data *data) +{ + /* + * Delete this transmit from the filehandle's xfer_list since + * we're done with it. + * + * Note that if the filehandle is closed before this transmit + * finished, then the release() function will set data->fh to NULL. + * Without that we would be referring to a closed filehandle. + */ + if (data->fh) + list_del(&data->xfer_list); + + if (data->blocking) { + /* + * Someone is blocking so mark the message as completed + * and call complete. + */ + data->completed = true; + complete(&data->c); + } else { + /* + * No blocking, so just queue the message if needed and + * free the memory. + */ + if (data->fh) + cec_queue_msg_fh(data->fh, &data->msg); + kfree(data); + } +} + +/* + * A pending CEC transmit needs to be cancelled, either because the CEC + * adapter is disabled or the transmit takes an impossibly long time to + * finish. + * + * This function is called with adap->lock held. + */ +static void cec_data_cancel(struct cec_data *data, u8 tx_status) +{ + /* + * It's either the current transmit, or it is a pending + * transmit. Take the appropriate action to clear it. + */ + if (data->adap->transmitting == data) { + data->adap->transmitting = NULL; + } else { + list_del_init(&data->list); + if (!(data->msg.tx_status & CEC_TX_STATUS_OK)) + if (!WARN_ON(!data->adap->transmit_queue_sz)) + data->adap->transmit_queue_sz--; + } + + if (data->msg.tx_status & CEC_TX_STATUS_OK) { + data->msg.rx_ts = ktime_get_ns(); + data->msg.rx_status = CEC_RX_STATUS_ABORTED; + } else { + data->msg.tx_ts = ktime_get_ns(); + data->msg.tx_status |= tx_status | + CEC_TX_STATUS_MAX_RETRIES; + data->msg.tx_error_cnt++; + data->attempts = 0; + } + + /* Queue transmitted message for monitoring purposes */ + cec_queue_msg_monitor(data->adap, &data->msg, 1); + + cec_data_completed(data); +} + +/* + * Flush all pending transmits and cancel any pending timeout work. + * + * This function is called with adap->lock held. + */ +static void cec_flush(struct cec_adapter *adap) +{ + struct cec_data *data, *n; + + /* + * If the adapter is disabled, or we're asked to stop, + * then cancel any pending transmits. + */ + while (!list_empty(&adap->transmit_queue)) { + data = list_first_entry(&adap->transmit_queue, + struct cec_data, list); + cec_data_cancel(data, CEC_TX_STATUS_ABORTED); + } + if (adap->transmitting) + cec_data_cancel(adap->transmitting, CEC_TX_STATUS_ABORTED); + + /* Cancel the pending timeout work. */ + list_for_each_entry_safe(data, n, &adap->wait_queue, list) { + if (cancel_delayed_work(&data->work)) + cec_data_cancel(data, CEC_TX_STATUS_OK); + /* + * If cancel_delayed_work returned false, then + * the cec_wait_timeout function is running, + * which will call cec_data_completed. So no + * need to do anything special in that case. + */ + } + /* + * If something went wrong and this counter isn't what it should + * be, then this will reset it back to 0. Warn if it is not 0, + * since it indicates a bug, either in this framework or in a + * CEC driver. + */ + if (WARN_ON(adap->transmit_queue_sz)) + adap->transmit_queue_sz = 0; +} + +/* + * Main CEC state machine + * + * Wait until the thread should be stopped, or we are not transmitting and + * a new transmit message is queued up, in which case we start transmitting + * that message. When the adapter finished transmitting the message it will + * call cec_transmit_done(). + * + * If the adapter is disabled, then remove all queued messages instead. + * + * If the current transmit times out, then cancel that transmit. + */ +int cec_thread_func(void *_adap) +{ + struct cec_adapter *adap = _adap; + + for (;;) { + unsigned int signal_free_time; + struct cec_data *data; + bool timeout = false; + u8 attempts; + + if (adap->transmit_in_progress) { + int err; + + /* + * We are transmitting a message, so add a timeout + * to prevent the state machine to get stuck waiting + * for this message to finalize and add a check to + * see if the adapter is disabled in which case the + * transmit should be canceled. + */ + err = wait_event_interruptible_timeout(adap->kthread_waitq, + (adap->needs_hpd && + (!adap->is_configured && !adap->is_configuring)) || + kthread_should_stop() || + (!adap->transmit_in_progress && + !list_empty(&adap->transmit_queue)), + msecs_to_jiffies(CEC_XFER_TIMEOUT_MS)); + timeout = err == 0; + } else { + /* Otherwise we just wait for something to happen. */ + wait_event_interruptible(adap->kthread_waitq, + kthread_should_stop() || + (!adap->transmit_in_progress && + !list_empty(&adap->transmit_queue))); + } + + mutex_lock(&adap->lock); + + if ((adap->needs_hpd && + (!adap->is_configured && !adap->is_configuring)) || + kthread_should_stop()) { + cec_flush(adap); + goto unlock; + } + + if (adap->transmit_in_progress && timeout) { + /* + * If we timeout, then log that. Normally this does + * not happen and it is an indication of a faulty CEC + * adapter driver, or the CEC bus is in some weird + * state. On rare occasions it can happen if there is + * so much traffic on the bus that the adapter was + * unable to transmit for CEC_XFER_TIMEOUT_MS (2.1s). + */ + if (adap->transmitting) { + pr_warn("cec-%s: message %*ph timed out\n", adap->name, + adap->transmitting->msg.len, + adap->transmitting->msg.msg); + /* Just give up on this. */ + cec_data_cancel(adap->transmitting, + CEC_TX_STATUS_TIMEOUT); + } else { + pr_warn("cec-%s: transmit timed out\n", adap->name); + } + adap->transmit_in_progress = false; + adap->tx_timeouts++; + goto unlock; + } + + /* + * If we are still transmitting, or there is nothing new to + * transmit, then just continue waiting. + */ + if (adap->transmit_in_progress || list_empty(&adap->transmit_queue)) + goto unlock; + + /* Get a new message to transmit */ + data = list_first_entry(&adap->transmit_queue, + struct cec_data, list); + list_del_init(&data->list); + if (!WARN_ON(!data->adap->transmit_queue_sz)) + adap->transmit_queue_sz--; + + /* Make this the current transmitting message */ + adap->transmitting = data; + + /* + * Suggested number of attempts as per the CEC 2.0 spec: + * 4 attempts is the default, except for 'secondary poll + * messages', i.e. poll messages not sent during the adapter + * configuration phase when it allocates logical addresses. + */ + if (data->msg.len == 1 && adap->is_configured) + attempts = 2; + else + attempts = 4; + + /* Set the suggested signal free time */ + if (data->attempts) { + /* should be >= 3 data bit periods for a retry */ + signal_free_time = CEC_SIGNAL_FREE_TIME_RETRY; + } else if (adap->last_initiator != + cec_msg_initiator(&data->msg)) { + /* should be >= 5 data bit periods for new initiator */ + signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR; + adap->last_initiator = cec_msg_initiator(&data->msg); + } else { + /* + * should be >= 7 data bit periods for sending another + * frame immediately after another. + */ + signal_free_time = CEC_SIGNAL_FREE_TIME_NEXT_XFER; + } + if (data->attempts == 0) + data->attempts = attempts; + + /* Tell the adapter to transmit, cancel on error */ + if (adap->ops->adap_transmit(adap, data->attempts, + signal_free_time, &data->msg)) + cec_data_cancel(data, CEC_TX_STATUS_ABORTED); + else + adap->transmit_in_progress = true; + +unlock: + mutex_unlock(&adap->lock); + + if (kthread_should_stop()) + break; + } + return 0; +} + +/* + * Called by the CEC adapter if a transmit finished. + */ +void cec_transmit_done_ts(struct cec_adapter *adap, u8 status, + u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt, + u8 error_cnt, ktime_t ts) +{ + struct cec_data *data; + struct cec_msg *msg; + unsigned int attempts_made = arb_lost_cnt + nack_cnt + + low_drive_cnt + error_cnt; + + dprintk(2, "%s: status 0x%02x\n", __func__, status); + if (attempts_made < 1) + attempts_made = 1; + + mutex_lock(&adap->lock); + data = adap->transmitting; + if (!data) { + /* + * This might happen if a transmit was issued and the cable is + * unplugged while the transmit is ongoing. Ignore this + * transmit in that case. + */ + if (!adap->transmit_in_progress) + dprintk(1, "%s was called without an ongoing transmit!\n", + __func__); + adap->transmit_in_progress = false; + goto wake_thread; + } + adap->transmit_in_progress = false; + + msg = &data->msg; + + /* Drivers must fill in the status! */ + WARN_ON(status == 0); + msg->tx_ts = ktime_to_ns(ts); + msg->tx_status |= status; + msg->tx_arb_lost_cnt += arb_lost_cnt; + msg->tx_nack_cnt += nack_cnt; + msg->tx_low_drive_cnt += low_drive_cnt; + msg->tx_error_cnt += error_cnt; + + /* Mark that we're done with this transmit */ + adap->transmitting = NULL; + + /* + * If there are still retry attempts left and there was an error and + * the hardware didn't signal that it retried itself (by setting + * CEC_TX_STATUS_MAX_RETRIES), then we will retry ourselves. + */ + if (data->attempts > attempts_made && + !(status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK))) { + /* Retry this message */ + data->attempts -= attempts_made; + if (msg->timeout) + dprintk(2, "retransmit: %*ph (attempts: %d, wait for 0x%02x)\n", + msg->len, msg->msg, data->attempts, msg->reply); + else + dprintk(2, "retransmit: %*ph (attempts: %d)\n", + msg->len, msg->msg, data->attempts); + /* Add the message in front of the transmit queue */ + list_add(&data->list, &adap->transmit_queue); + adap->transmit_queue_sz++; + goto wake_thread; + } + + data->attempts = 0; + + /* Always set CEC_TX_STATUS_MAX_RETRIES on error */ + if (!(status & CEC_TX_STATUS_OK)) + msg->tx_status |= CEC_TX_STATUS_MAX_RETRIES; + + /* Queue transmitted message for monitoring purposes */ + cec_queue_msg_monitor(adap, msg, 1); + + if ((status & CEC_TX_STATUS_OK) && adap->is_configured && + msg->timeout) { + /* + * Queue the message into the wait queue if we want to wait + * for a reply. + */ + list_add_tail(&data->list, &adap->wait_queue); + schedule_delayed_work(&data->work, + msecs_to_jiffies(msg->timeout)); + } else { + /* Otherwise we're done */ + cec_data_completed(data); + } + +wake_thread: + /* + * Wake up the main thread to see if another message is ready + * for transmitting or to retry the current message. + */ + wake_up_interruptible(&adap->kthread_waitq); + mutex_unlock(&adap->lock); +} +EXPORT_SYMBOL_GPL(cec_transmit_done_ts); + +void cec_transmit_attempt_done_ts(struct cec_adapter *adap, + u8 status, ktime_t ts) +{ + switch (status & ~CEC_TX_STATUS_MAX_RETRIES) { + case CEC_TX_STATUS_OK: + cec_transmit_done_ts(adap, status, 0, 0, 0, 0, ts); + return; + case CEC_TX_STATUS_ARB_LOST: + cec_transmit_done_ts(adap, status, 1, 0, 0, 0, ts); + return; + case CEC_TX_STATUS_NACK: + cec_transmit_done_ts(adap, status, 0, 1, 0, 0, ts); + return; + case CEC_TX_STATUS_LOW_DRIVE: + cec_transmit_done_ts(adap, status, 0, 0, 1, 0, ts); + return; + case CEC_TX_STATUS_ERROR: + cec_transmit_done_ts(adap, status, 0, 0, 0, 1, ts); + return; + default: + /* Should never happen */ + WARN(1, "cec-%s: invalid status 0x%02x\n", adap->name, status); + return; + } +} +EXPORT_SYMBOL_GPL(cec_transmit_attempt_done_ts); + +/* + * Called when waiting for a reply times out. + */ +static void cec_wait_timeout(struct work_struct *work) +{ + struct cec_data *data = container_of(work, struct cec_data, work.work); + struct cec_adapter *adap = data->adap; + + mutex_lock(&adap->lock); + /* + * Sanity check in case the timeout and the arrival of the message + * happened at the same time. + */ + if (list_empty(&data->list)) + goto unlock; + + /* Mark the message as timed out */ + list_del_init(&data->list); + data->msg.rx_ts = ktime_get_ns(); + data->msg.rx_status = CEC_RX_STATUS_TIMEOUT; + cec_data_completed(data); +unlock: + mutex_unlock(&adap->lock); +} + +/* + * Transmit a message. The fh argument may be NULL if the transmit is not + * associated with a specific filehandle. + * + * This function is called with adap->lock held. + */ +int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, + struct cec_fh *fh, bool block) +{ + struct cec_data *data; + + msg->rx_ts = 0; + msg->tx_ts = 0; + msg->rx_status = 0; + msg->tx_status = 0; + msg->tx_arb_lost_cnt = 0; + msg->tx_nack_cnt = 0; + msg->tx_low_drive_cnt = 0; + msg->tx_error_cnt = 0; + msg->sequence = 0; + + if (msg->reply && msg->timeout == 0) { + /* Make sure the timeout isn't 0. */ + msg->timeout = 1000; + } + if (msg->timeout) + msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS; + else + msg->flags = 0; + + if (msg->len > 1 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) { + msg->msg[2] = adap->phys_addr >> 8; + msg->msg[3] = adap->phys_addr & 0xff; + } + + /* Sanity checks */ + if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) { + dprintk(1, "%s: invalid length %d\n", __func__, msg->len); + return -EINVAL; + } + + memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len); + + if (msg->timeout) + dprintk(2, "%s: %*ph (wait for 0x%02x%s)\n", + __func__, msg->len, msg->msg, msg->reply, + !block ? ", nb" : ""); + else + dprintk(2, "%s: %*ph%s\n", + __func__, msg->len, msg->msg, !block ? " (nb)" : ""); + + if (msg->timeout && msg->len == 1) { + dprintk(1, "%s: can't reply to poll msg\n", __func__); + return -EINVAL; + } + if (msg->len == 1) { + if (cec_msg_destination(msg) == 0xf) { + dprintk(1, "%s: invalid poll message\n", __func__); + return -EINVAL; + } + if (cec_has_log_addr(adap, cec_msg_destination(msg))) { + /* + * If the destination is a logical address our adapter + * has already claimed, then just NACK this. + * It depends on the hardware what it will do with a + * POLL to itself (some OK this), so it is just as + * easy to handle it here so the behavior will be + * consistent. + */ + msg->tx_ts = ktime_get_ns(); + msg->tx_status = CEC_TX_STATUS_NACK | + CEC_TX_STATUS_MAX_RETRIES; + msg->tx_nack_cnt = 1; + msg->sequence = ++adap->sequence; + if (!msg->sequence) + msg->sequence = ++adap->sequence; + return 0; + } + } + if (msg->len > 1 && !cec_msg_is_broadcast(msg) && + cec_has_log_addr(adap, cec_msg_destination(msg))) { + dprintk(1, "%s: destination is the adapter itself\n", __func__); + return -EINVAL; + } + if (msg->len > 1 && adap->is_configured && + !cec_has_log_addr(adap, cec_msg_initiator(msg))) { + dprintk(1, "%s: initiator has unknown logical address %d\n", + __func__, cec_msg_initiator(msg)); + return -EINVAL; + } + if (!adap->is_configured && !adap->is_configuring) { + if (adap->needs_hpd || msg->msg[0] != 0xf0) { + dprintk(1, "%s: adapter is unconfigured\n", __func__); + return -ENONET; + } + if (msg->reply) { + dprintk(1, "%s: invalid msg->reply\n", __func__); + return -EINVAL; + } + } + + if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) { + dprintk(1, "%s: transmit queue full\n", __func__); + return -EBUSY; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + msg->sequence = ++adap->sequence; + if (!msg->sequence) + msg->sequence = ++adap->sequence; + + data->msg = *msg; + data->fh = fh; + data->adap = adap; + data->blocking = block; + + init_completion(&data->c); + INIT_DELAYED_WORK(&data->work, cec_wait_timeout); + + if (fh) + list_add_tail(&data->xfer_list, &fh->xfer_list); + + list_add_tail(&data->list, &adap->transmit_queue); + adap->transmit_queue_sz++; + if (!adap->transmitting) + wake_up_interruptible(&adap->kthread_waitq); + + /* All done if we don't need to block waiting for completion */ + if (!block) + return 0; + + /* + * Release the lock and wait, retake the lock afterwards. + */ + mutex_unlock(&adap->lock); + wait_for_completion_killable(&data->c); + if (!data->completed) + cancel_delayed_work_sync(&data->work); + mutex_lock(&adap->lock); + + /* Cancel the transmit if it was interrupted */ + if (!data->completed) + cec_data_cancel(data, CEC_TX_STATUS_ABORTED); + + /* The transmit completed (possibly with an error) */ + *msg = data->msg; + kfree(data); + return 0; +} + +/* Helper function to be used by drivers and this framework. */ +int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, + bool block) +{ + int ret; + + mutex_lock(&adap->lock); + ret = cec_transmit_msg_fh(adap, msg, NULL, block); + mutex_unlock(&adap->lock); + return ret; +} +EXPORT_SYMBOL_GPL(cec_transmit_msg); + +/* + * I don't like forward references but without this the low-level + * cec_received_msg() function would come after a bunch of high-level + * CEC protocol handling functions. That was very confusing. + */ +static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, + bool is_reply); + +#define DIRECTED 0x80 +#define BCAST1_4 0x40 +#define BCAST2_0 0x20 /* broadcast only allowed for >= 2.0 */ +#define BCAST (BCAST1_4 | BCAST2_0) +#define BOTH (BCAST | DIRECTED) + +/* + * Specify minimum length and whether the message is directed, broadcast + * or both. Messages that do not match the criteria are ignored as per + * the CEC specification. + */ +static const u8 cec_msg_size[256] = { + [CEC_MSG_ACTIVE_SOURCE] = 4 | BCAST, + [CEC_MSG_IMAGE_VIEW_ON] = 2 | DIRECTED, + [CEC_MSG_TEXT_VIEW_ON] = 2 | DIRECTED, + [CEC_MSG_INACTIVE_SOURCE] = 4 | DIRECTED, + [CEC_MSG_REQUEST_ACTIVE_SOURCE] = 2 | BCAST, + [CEC_MSG_ROUTING_CHANGE] = 6 | BCAST, + [CEC_MSG_ROUTING_INFORMATION] = 4 | BCAST, + [CEC_MSG_SET_STREAM_PATH] = 4 | BCAST, + [CEC_MSG_STANDBY] = 2 | BOTH, + [CEC_MSG_RECORD_OFF] = 2 | DIRECTED, + [CEC_MSG_RECORD_ON] = 3 | DIRECTED, + [CEC_MSG_RECORD_STATUS] = 3 | DIRECTED, + [CEC_MSG_RECORD_TV_SCREEN] = 2 | DIRECTED, + [CEC_MSG_CLEAR_ANALOGUE_TIMER] = 13 | DIRECTED, + [CEC_MSG_CLEAR_DIGITAL_TIMER] = 16 | DIRECTED, + [CEC_MSG_CLEAR_EXT_TIMER] = 13 | DIRECTED, + [CEC_MSG_SET_ANALOGUE_TIMER] = 13 | DIRECTED, + [CEC_MSG_SET_DIGITAL_TIMER] = 16 | DIRECTED, + [CEC_MSG_SET_EXT_TIMER] = 13 | DIRECTED, + [CEC_MSG_SET_TIMER_PROGRAM_TITLE] = 2 | DIRECTED, + [CEC_MSG_TIMER_CLEARED_STATUS] = 3 | DIRECTED, + [CEC_MSG_TIMER_STATUS] = 3 | DIRECTED, + [CEC_MSG_CEC_VERSION] = 3 | DIRECTED, + [CEC_MSG_GET_CEC_VERSION] = 2 | DIRECTED, + [CEC_MSG_GIVE_PHYSICAL_ADDR] = 2 | DIRECTED, + [CEC_MSG_GET_MENU_LANGUAGE] = 2 | DIRECTED, + [CEC_MSG_REPORT_PHYSICAL_ADDR] = 5 | BCAST, + [CEC_MSG_SET_MENU_LANGUAGE] = 5 | BCAST, + [CEC_MSG_REPORT_FEATURES] = 6 | BCAST, + [CEC_MSG_GIVE_FEATURES] = 2 | DIRECTED, + [CEC_MSG_DECK_CONTROL] = 3 | DIRECTED, + [CEC_MSG_DECK_STATUS] = 3 | DIRECTED, + [CEC_MSG_GIVE_DECK_STATUS] = 3 | DIRECTED, + [CEC_MSG_PLAY] = 3 | DIRECTED, + [CEC_MSG_GIVE_TUNER_DEVICE_STATUS] = 3 | DIRECTED, + [CEC_MSG_SELECT_ANALOGUE_SERVICE] = 6 | DIRECTED, + [CEC_MSG_SELECT_DIGITAL_SERVICE] = 9 | DIRECTED, + [CEC_MSG_TUNER_DEVICE_STATUS] = 7 | DIRECTED, + [CEC_MSG_TUNER_STEP_DECREMENT] = 2 | DIRECTED, + [CEC_MSG_TUNER_STEP_INCREMENT] = 2 | DIRECTED, + [CEC_MSG_DEVICE_VENDOR_ID] = 5 | BCAST, + [CEC_MSG_GIVE_DEVICE_VENDOR_ID] = 2 | DIRECTED, + [CEC_MSG_VENDOR_COMMAND] = 2 | DIRECTED, + [CEC_MSG_VENDOR_COMMAND_WITH_ID] = 5 | BOTH, + [CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN] = 2 | BOTH, + [CEC_MSG_VENDOR_REMOTE_BUTTON_UP] = 2 | BOTH, + [CEC_MSG_SET_OSD_STRING] = 3 | DIRECTED, + [CEC_MSG_GIVE_OSD_NAME] = 2 | DIRECTED, + [CEC_MSG_SET_OSD_NAME] = 2 | DIRECTED, + [CEC_MSG_MENU_REQUEST] = 3 | DIRECTED, + [CEC_MSG_MENU_STATUS] = 3 | DIRECTED, + [CEC_MSG_USER_CONTROL_PRESSED] = 3 | DIRECTED, + [CEC_MSG_USER_CONTROL_RELEASED] = 2 | DIRECTED, + [CEC_MSG_GIVE_DEVICE_POWER_STATUS] = 2 | DIRECTED, + [CEC_MSG_REPORT_POWER_STATUS] = 3 | DIRECTED | BCAST2_0, + [CEC_MSG_FEATURE_ABORT] = 4 | DIRECTED, + [CEC_MSG_ABORT] = 2 | DIRECTED, + [CEC_MSG_GIVE_AUDIO_STATUS] = 2 | DIRECTED, + [CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS] = 2 | DIRECTED, + [CEC_MSG_REPORT_AUDIO_STATUS] = 3 | DIRECTED, + [CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED, + [CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED, + [CEC_MSG_SET_SYSTEM_AUDIO_MODE] = 3 | BOTH, + [CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST] = 2 | DIRECTED, + [CEC_MSG_SYSTEM_AUDIO_MODE_STATUS] = 3 | DIRECTED, + [CEC_MSG_SET_AUDIO_RATE] = 3 | DIRECTED, + [CEC_MSG_INITIATE_ARC] = 2 | DIRECTED, + [CEC_MSG_REPORT_ARC_INITIATED] = 2 | DIRECTED, + [CEC_MSG_REPORT_ARC_TERMINATED] = 2 | DIRECTED, + [CEC_MSG_REQUEST_ARC_INITIATION] = 2 | DIRECTED, + [CEC_MSG_REQUEST_ARC_TERMINATION] = 2 | DIRECTED, + [CEC_MSG_TERMINATE_ARC] = 2 | DIRECTED, + [CEC_MSG_REQUEST_CURRENT_LATENCY] = 4 | BCAST, + [CEC_MSG_REPORT_CURRENT_LATENCY] = 6 | BCAST, + [CEC_MSG_CDC_MESSAGE] = 2 | BCAST, +}; + +/* Called by the CEC adapter if a message is received */ +void cec_received_msg_ts(struct cec_adapter *adap, + struct cec_msg *msg, ktime_t ts) +{ + struct cec_data *data; + u8 msg_init = cec_msg_initiator(msg); + u8 msg_dest = cec_msg_destination(msg); + u8 cmd = msg->msg[1]; + bool is_reply = false; + bool valid_la = true; + u8 min_len = 0; + + if (WARN_ON(!msg->len || msg->len > CEC_MAX_MSG_SIZE)) + return; + + /* + * Some CEC adapters will receive the messages that they transmitted. + * This test filters out those messages by checking if we are the + * initiator, and just returning in that case. + * + * Note that this won't work if this is an Unregistered device. + * + * It is bad practice if the hardware receives the message that it + * transmitted and luckily most CEC adapters behave correctly in this + * respect. + */ + if (msg_init != CEC_LOG_ADDR_UNREGISTERED && + cec_has_log_addr(adap, msg_init)) + return; + + msg->rx_ts = ktime_to_ns(ts); + msg->rx_status = CEC_RX_STATUS_OK; + msg->sequence = msg->reply = msg->timeout = 0; + msg->tx_status = 0; + msg->tx_ts = 0; + msg->tx_arb_lost_cnt = 0; + msg->tx_nack_cnt = 0; + msg->tx_low_drive_cnt = 0; + msg->tx_error_cnt = 0; + msg->flags = 0; + memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len); + + mutex_lock(&adap->lock); + dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg); + + adap->last_initiator = 0xff; + + /* Check if this message was for us (directed or broadcast). */ + if (!cec_msg_is_broadcast(msg)) + valid_la = cec_has_log_addr(adap, msg_dest); + + /* + * Check if the length is not too short or if the message is a + * broadcast message where a directed message was expected or + * vice versa. If so, then the message has to be ignored (according + * to section CEC 7.3 and CEC 12.2). + */ + if (valid_la && msg->len > 1 && cec_msg_size[cmd]) { + u8 dir_fl = cec_msg_size[cmd] & BOTH; + + min_len = cec_msg_size[cmd] & 0x1f; + if (msg->len < min_len) + valid_la = false; + else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED)) + valid_la = false; + else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST)) + valid_la = false; + else if (cec_msg_is_broadcast(msg) && + adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0 && + !(dir_fl & BCAST1_4)) + valid_la = false; + } + if (valid_la && min_len) { + /* These messages have special length requirements */ + switch (cmd) { + case CEC_MSG_TIMER_STATUS: + if (msg->msg[2] & 0x10) { + switch (msg->msg[2] & 0xf) { + case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE: + case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE: + if (msg->len < 5) + valid_la = false; + break; + } + } else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) { + if (msg->len < 5) + valid_la = false; + } + break; + case CEC_MSG_RECORD_ON: + switch (msg->msg[2]) { + case CEC_OP_RECORD_SRC_OWN: + break; + case CEC_OP_RECORD_SRC_DIGITAL: + if (msg->len < 10) + valid_la = false; + break; + case CEC_OP_RECORD_SRC_ANALOG: + if (msg->len < 7) + valid_la = false; + break; + case CEC_OP_RECORD_SRC_EXT_PLUG: + if (msg->len < 4) + valid_la = false; + break; + case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR: + if (msg->len < 5) + valid_la = false; + break; + } + break; + } + } + + /* It's a valid message and not a poll or CDC message */ + if (valid_la && msg->len > 1 && cmd != CEC_MSG_CDC_MESSAGE) { + bool abort = cmd == CEC_MSG_FEATURE_ABORT; + + /* The aborted command is in msg[2] */ + if (abort) + cmd = msg->msg[2]; + + /* + * Walk over all transmitted messages that are waiting for a + * reply. + */ + list_for_each_entry(data, &adap->wait_queue, list) { + struct cec_msg *dst = &data->msg; + + /* + * The *only* CEC message that has two possible replies + * is CEC_MSG_INITIATE_ARC. + * In this case allow either of the two replies. + */ + if (!abort && dst->msg[1] == CEC_MSG_INITIATE_ARC && + (cmd == CEC_MSG_REPORT_ARC_INITIATED || + cmd == CEC_MSG_REPORT_ARC_TERMINATED) && + (dst->reply == CEC_MSG_REPORT_ARC_INITIATED || + dst->reply == CEC_MSG_REPORT_ARC_TERMINATED)) + dst->reply = cmd; + + /* Does the command match? */ + if ((abort && cmd != dst->msg[1]) || + (!abort && cmd != dst->reply)) + continue; + + /* Does the addressing match? */ + if (msg_init != cec_msg_destination(dst) && + !cec_msg_is_broadcast(dst)) + continue; + + /* We got a reply */ + memcpy(dst->msg, msg->msg, msg->len); + dst->len = msg->len; + dst->rx_ts = msg->rx_ts; + dst->rx_status = msg->rx_status; + if (abort) + dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT; + msg->flags = dst->flags; + msg->sequence = dst->sequence; + /* Remove it from the wait_queue */ + list_del_init(&data->list); + + /* Cancel the pending timeout work */ + if (!cancel_delayed_work(&data->work)) { + mutex_unlock(&adap->lock); + flush_scheduled_work(); + mutex_lock(&adap->lock); + } + /* + * Mark this as a reply, provided someone is still + * waiting for the answer. + */ + if (data->fh) + is_reply = true; + cec_data_completed(data); + break; + } + } + mutex_unlock(&adap->lock); + + /* Pass the message on to any monitoring filehandles */ + cec_queue_msg_monitor(adap, msg, valid_la); + + /* We're done if it is not for us or a poll message */ + if (!valid_la || msg->len <= 1) + return; + + if (adap->log_addrs.log_addr_mask == 0) + return; + + /* + * Process the message on the protocol level. If is_reply is true, + * then cec_receive_notify() won't pass on the reply to the listener(s) + * since that was already done by cec_data_completed() above. + */ + cec_receive_notify(adap, msg, is_reply); +} +EXPORT_SYMBOL_GPL(cec_received_msg_ts); + +/* Logical Address Handling */ + +/* + * Attempt to claim a specific logical address. + * + * This function is called with adap->lock held. + */ +static int cec_config_log_addr(struct cec_adapter *adap, + unsigned int idx, + unsigned int log_addr) +{ + struct cec_log_addrs *las = &adap->log_addrs; + struct cec_msg msg = { }; + const unsigned int max_retries = 2; + unsigned int i; + int err; + + if (cec_has_log_addr(adap, log_addr)) + return 0; + + /* Send poll message */ + msg.len = 1; + msg.msg[0] = (log_addr << 4) | log_addr; + + for (i = 0; i < max_retries; i++) { + err = cec_transmit_msg_fh(adap, &msg, NULL, true); + + /* + * While trying to poll the physical address was reset + * and the adapter was unconfigured, so bail out. + */ + if (adap->phys_addr == CEC_PHYS_ADDR_INVALID) + return -EINTR; + + if (err) + return err; + + /* + * The message was aborted due to a disconnect or + * unconfigure, just bail out. + */ + if (msg.tx_status & CEC_TX_STATUS_ABORTED) + return -EINTR; + if (msg.tx_status & CEC_TX_STATUS_OK) + return 0; + if (msg.tx_status & CEC_TX_STATUS_NACK) + break; + /* + * Retry up to max_retries times if the message was neither + * OKed or NACKed. This can happen due to e.g. a Lost + * Arbitration condition. + */ + } + + /* + * If we are unable to get an OK or a NACK after max_retries attempts + * (and note that each attempt already consists of four polls), then + * then we assume that something is really weird and that it is not a + * good idea to try and claim this logical address. + */ + if (i == max_retries) + return 0; + + /* + * Message not acknowledged, so this logical + * address is free to use. + */ + err = adap->ops->adap_log_addr(adap, log_addr); + if (err) + return err; + + las->log_addr[idx] = log_addr; + las->log_addr_mask |= 1 << log_addr; + adap->phys_addrs[log_addr] = adap->phys_addr; + return 1; +} + +/* + * Unconfigure the adapter: clear all logical addresses and send + * the state changed event. + * + * This function is called with adap->lock held. + */ +static void cec_adap_unconfigure(struct cec_adapter *adap) +{ + if (!adap->needs_hpd || + adap->phys_addr != CEC_PHYS_ADDR_INVALID) + WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID)); + adap->log_addrs.log_addr_mask = 0; + adap->is_configured = false; + memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs)); + cec_flush(adap); + wake_up_interruptible(&adap->kthread_waitq); + cec_post_state_event(adap); +} + +/* + * Attempt to claim the required logical addresses. + */ +static int cec_config_thread_func(void *arg) +{ + /* The various LAs for each type of device */ + static const u8 tv_log_addrs[] = { + CEC_LOG_ADDR_TV, CEC_LOG_ADDR_SPECIFIC, + CEC_LOG_ADDR_INVALID + }; + static const u8 record_log_addrs[] = { + CEC_LOG_ADDR_RECORD_1, CEC_LOG_ADDR_RECORD_2, + CEC_LOG_ADDR_RECORD_3, + CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2, + CEC_LOG_ADDR_INVALID + }; + static const u8 tuner_log_addrs[] = { + CEC_LOG_ADDR_TUNER_1, CEC_LOG_ADDR_TUNER_2, + CEC_LOG_ADDR_TUNER_3, CEC_LOG_ADDR_TUNER_4, + CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2, + CEC_LOG_ADDR_INVALID + }; + static const u8 playback_log_addrs[] = { + CEC_LOG_ADDR_PLAYBACK_1, CEC_LOG_ADDR_PLAYBACK_2, + CEC_LOG_ADDR_PLAYBACK_3, + CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2, + CEC_LOG_ADDR_INVALID + }; + static const u8 audiosystem_log_addrs[] = { + CEC_LOG_ADDR_AUDIOSYSTEM, + CEC_LOG_ADDR_INVALID + }; + static const u8 specific_use_log_addrs[] = { + CEC_LOG_ADDR_SPECIFIC, + CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2, + CEC_LOG_ADDR_INVALID + }; + static const u8 *type2addrs[6] = { + [CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs, + [CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs, + [CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs, + [CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs, + [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs, + [CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs, + }; + static const u16 type2mask[] = { + [CEC_LOG_ADDR_TYPE_TV] = CEC_LOG_ADDR_MASK_TV, + [CEC_LOG_ADDR_TYPE_RECORD] = CEC_LOG_ADDR_MASK_RECORD, + [CEC_LOG_ADDR_TYPE_TUNER] = CEC_LOG_ADDR_MASK_TUNER, + [CEC_LOG_ADDR_TYPE_PLAYBACK] = CEC_LOG_ADDR_MASK_PLAYBACK, + [CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = CEC_LOG_ADDR_MASK_AUDIOSYSTEM, + [CEC_LOG_ADDR_TYPE_SPECIFIC] = CEC_LOG_ADDR_MASK_SPECIFIC, + }; + struct cec_adapter *adap = arg; + struct cec_log_addrs *las = &adap->log_addrs; + int err; + int i, j; + + mutex_lock(&adap->lock); + dprintk(1, "physical address: %x.%x.%x.%x, claim %d logical addresses\n", + cec_phys_addr_exp(adap->phys_addr), las->num_log_addrs); + las->log_addr_mask = 0; + + if (las->log_addr_type[0] == CEC_LOG_ADDR_TYPE_UNREGISTERED) + goto configured; + + for (i = 0; i < las->num_log_addrs; i++) { + unsigned int type = las->log_addr_type[i]; + const u8 *la_list; + u8 last_la; + + /* + * The TV functionality can only map to physical address 0. + * For any other address, try the Specific functionality + * instead as per the spec. + */ + if (adap->phys_addr && type == CEC_LOG_ADDR_TYPE_TV) + type = CEC_LOG_ADDR_TYPE_SPECIFIC; + + la_list = type2addrs[type]; + last_la = las->log_addr[i]; + las->log_addr[i] = CEC_LOG_ADDR_INVALID; + if (last_la == CEC_LOG_ADDR_INVALID || + last_la == CEC_LOG_ADDR_UNREGISTERED || + !((1 << last_la) & type2mask[type])) + last_la = la_list[0]; + + err = cec_config_log_addr(adap, i, last_la); + if (err > 0) /* Reused last LA */ + continue; + + if (err < 0) + goto unconfigure; + + for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) { + /* Tried this one already, skip it */ + if (la_list[j] == last_la) + continue; + /* The backup addresses are CEC 2.0 specific */ + if ((la_list[j] == CEC_LOG_ADDR_BACKUP_1 || + la_list[j] == CEC_LOG_ADDR_BACKUP_2) && + las->cec_version < CEC_OP_CEC_VERSION_2_0) + continue; + + err = cec_config_log_addr(adap, i, la_list[j]); + if (err == 0) /* LA is in use */ + continue; + if (err < 0) + goto unconfigure; + /* Done, claimed an LA */ + break; + } + + if (la_list[j] == CEC_LOG_ADDR_INVALID) + dprintk(1, "could not claim LA %d\n", i); + } + + if (adap->log_addrs.log_addr_mask == 0 && + !(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK)) + goto unconfigure; + +configured: + if (adap->log_addrs.log_addr_mask == 0) { + /* Fall back to unregistered */ + las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED; + las->log_addr_mask = 1 << las->log_addr[0]; + for (i = 1; i < las->num_log_addrs; i++) + las->log_addr[i] = CEC_LOG_ADDR_INVALID; + } + for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) + las->log_addr[i] = CEC_LOG_ADDR_INVALID; + adap->is_configured = true; + adap->is_configuring = false; + cec_post_state_event(adap); + + /* + * Now post the Report Features and Report Physical Address broadcast + * messages. Note that these are non-blocking transmits, meaning that + * they are just queued up and once adap->lock is unlocked the main + * thread will kick in and start transmitting these. + * + * If after this function is done (but before one or more of these + * messages are actually transmitted) the CEC adapter is unconfigured, + * then any remaining messages will be dropped by the main thread. + */ + for (i = 0; i < las->num_log_addrs; i++) { + struct cec_msg msg = {}; + + if (las->log_addr[i] == CEC_LOG_ADDR_INVALID || + (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY)) + continue; + + msg.msg[0] = (las->log_addr[i] << 4) | 0x0f; + + /* Report Features must come first according to CEC 2.0 */ + if (las->log_addr[i] != CEC_LOG_ADDR_UNREGISTERED && + adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0) { + cec_fill_msg_report_features(adap, &msg, i); + cec_transmit_msg_fh(adap, &msg, NULL, false); + } + + /* Report Physical Address */ + cec_msg_report_physical_addr(&msg, adap->phys_addr, + las->primary_device_type[i]); + dprintk(1, "config: la %d pa %x.%x.%x.%x\n", + las->log_addr[i], + cec_phys_addr_exp(adap->phys_addr)); + cec_transmit_msg_fh(adap, &msg, NULL, false); + + /* Report Vendor ID */ + if (adap->log_addrs.vendor_id != CEC_VENDOR_ID_NONE) { + cec_msg_device_vendor_id(&msg, + adap->log_addrs.vendor_id); + cec_transmit_msg_fh(adap, &msg, NULL, false); + } + } + adap->kthread_config = NULL; + complete(&adap->config_completion); + mutex_unlock(&adap->lock); + return 0; + +unconfigure: + for (i = 0; i < las->num_log_addrs; i++) + las->log_addr[i] = CEC_LOG_ADDR_INVALID; + cec_adap_unconfigure(adap); + adap->is_configuring = false; + adap->kthread_config = NULL; + complete(&adap->config_completion); + mutex_unlock(&adap->lock); + return 0; +} + +/* + * Called from either __cec_s_phys_addr or __cec_s_log_addrs to claim the + * logical addresses. + * + * This function is called with adap->lock held. + */ +static void cec_claim_log_addrs(struct cec_adapter *adap, bool block) +{ + if (WARN_ON(adap->is_configuring || adap->is_configured)) + return; + + init_completion(&adap->config_completion); + + /* Ready to kick off the thread */ + adap->is_configuring = true; + adap->kthread_config = kthread_run(cec_config_thread_func, adap, + "ceccfg-%s", adap->name); + if (IS_ERR(adap->kthread_config)) { + adap->kthread_config = NULL; + } else if (block) { + mutex_unlock(&adap->lock); + wait_for_completion(&adap->config_completion); + mutex_lock(&adap->lock); + } +} + +/* Set a new physical address and send an event notifying userspace of this. + * + * This function is called with adap->lock held. + */ +void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block) +{ + if (phys_addr == adap->phys_addr) + return; + if (phys_addr != CEC_PHYS_ADDR_INVALID && adap->devnode.unregistered) + return; + + dprintk(1, "new physical address %x.%x.%x.%x\n", + cec_phys_addr_exp(phys_addr)); + if (phys_addr == CEC_PHYS_ADDR_INVALID || + adap->phys_addr != CEC_PHYS_ADDR_INVALID) { + adap->phys_addr = CEC_PHYS_ADDR_INVALID; + cec_post_state_event(adap); + cec_adap_unconfigure(adap); + /* Disabling monitor all mode should always succeed */ + if (adap->monitor_all_cnt) + WARN_ON(call_op(adap, adap_monitor_all_enable, false)); + mutex_lock(&adap->devnode.lock); + if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) { + WARN_ON(adap->ops->adap_enable(adap, false)); + adap->transmit_in_progress = false; + wake_up_interruptible(&adap->kthread_waitq); + } + mutex_unlock(&adap->devnode.lock); + if (phys_addr == CEC_PHYS_ADDR_INVALID) + return; + } + + mutex_lock(&adap->devnode.lock); + adap->last_initiator = 0xff; + adap->transmit_in_progress = false; + + if ((adap->needs_hpd || list_empty(&adap->devnode.fhs)) && + adap->ops->adap_enable(adap, true)) { + mutex_unlock(&adap->devnode.lock); + return; + } + + if (adap->monitor_all_cnt && + call_op(adap, adap_monitor_all_enable, true)) { + if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) + WARN_ON(adap->ops->adap_enable(adap, false)); + mutex_unlock(&adap->devnode.lock); + return; + } + mutex_unlock(&adap->devnode.lock); + + adap->phys_addr = phys_addr; + cec_post_state_event(adap); + if (adap->log_addrs.num_log_addrs) + cec_claim_log_addrs(adap, block); +} + +void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block) +{ + if (IS_ERR_OR_NULL(adap)) + return; + + mutex_lock(&adap->lock); + __cec_s_phys_addr(adap, phys_addr, block); + mutex_unlock(&adap->lock); +} +EXPORT_SYMBOL_GPL(cec_s_phys_addr); + +void cec_s_phys_addr_from_edid(struct cec_adapter *adap, + const struct edid *edid) +{ + u16 pa = CEC_PHYS_ADDR_INVALID; + + if (edid && edid->extensions) + pa = cec_get_edid_phys_addr((const u8 *)edid, + EDID_LENGTH * (edid->extensions + 1), NULL); + cec_s_phys_addr(adap, pa, false); +} +EXPORT_SYMBOL_GPL(cec_s_phys_addr_from_edid); + +/* + * Called from either the ioctl or a driver to set the logical addresses. + * + * This function is called with adap->lock held. + */ +int __cec_s_log_addrs(struct cec_adapter *adap, + struct cec_log_addrs *log_addrs, bool block) +{ + u16 type_mask = 0; + int i; + + if (adap->devnode.unregistered) + return -ENODEV; + + if (!log_addrs || log_addrs->num_log_addrs == 0) { + cec_adap_unconfigure(adap); + adap->log_addrs.num_log_addrs = 0; + for (i = 0; i < CEC_MAX_LOG_ADDRS; i++) + adap->log_addrs.log_addr[i] = CEC_LOG_ADDR_INVALID; + adap->log_addrs.osd_name[0] = '\0'; + adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE; + adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0; + return 0; + } + + if (log_addrs->flags & CEC_LOG_ADDRS_FL_CDC_ONLY) { + /* + * Sanitize log_addrs fields if a CDC-Only device is + * requested. + */ + log_addrs->num_log_addrs = 1; + log_addrs->osd_name[0] = '\0'; + log_addrs->vendor_id = CEC_VENDOR_ID_NONE; + log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED; + /* + * This is just an internal convention since a CDC-Only device + * doesn't have to be a switch. But switches already use + * unregistered, so it makes some kind of sense to pick this + * as the primary device. Since a CDC-Only device never sends + * any 'normal' CEC messages this primary device type is never + * sent over the CEC bus. + */ + log_addrs->primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_SWITCH; + log_addrs->all_device_types[0] = 0; + log_addrs->features[0][0] = 0; + log_addrs->features[0][1] = 0; + } + + /* Ensure the osd name is 0-terminated */ + log_addrs->osd_name[sizeof(log_addrs->osd_name) - 1] = '\0'; + + /* Sanity checks */ + if (log_addrs->num_log_addrs > adap->available_log_addrs) { + dprintk(1, "num_log_addrs > %d\n", adap->available_log_addrs); + return -EINVAL; + } + + /* + * Vendor ID is a 24 bit number, so check if the value is + * within the correct range. + */ + if (log_addrs->vendor_id != CEC_VENDOR_ID_NONE && + (log_addrs->vendor_id & 0xff000000) != 0) { + dprintk(1, "invalid vendor ID\n"); + return -EINVAL; + } + + if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 && + log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) { + dprintk(1, "invalid CEC version\n"); + return -EINVAL; + } + + if (log_addrs->num_log_addrs > 1) + for (i = 0; i < log_addrs->num_log_addrs; i++) + if (log_addrs->log_addr_type[i] == + CEC_LOG_ADDR_TYPE_UNREGISTERED) { + dprintk(1, "num_log_addrs > 1 can't be combined with unregistered LA\n"); + return -EINVAL; + } + + for (i = 0; i < log_addrs->num_log_addrs; i++) { + const u8 feature_sz = ARRAY_SIZE(log_addrs->features[0]); + u8 *features = log_addrs->features[i]; + bool op_is_dev_features = false; + unsigned j; + + log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID; + if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) { + dprintk(1, "unknown logical address type\n"); + return -EINVAL; + } + if (type_mask & (1 << log_addrs->log_addr_type[i])) { + dprintk(1, "duplicate logical address type\n"); + return -EINVAL; + } + type_mask |= 1 << log_addrs->log_addr_type[i]; + if ((type_mask & (1 << CEC_LOG_ADDR_TYPE_RECORD)) && + (type_mask & (1 << CEC_LOG_ADDR_TYPE_PLAYBACK))) { + /* Record already contains the playback functionality */ + dprintk(1, "invalid record + playback combination\n"); + return -EINVAL; + } + if (log_addrs->primary_device_type[i] > + CEC_OP_PRIM_DEVTYPE_PROCESSOR) { + dprintk(1, "unknown primary device type\n"); + return -EINVAL; + } + if (log_addrs->primary_device_type[i] == 2) { + dprintk(1, "invalid primary device type\n"); + return -EINVAL; + } + for (j = 0; j < feature_sz; j++) { + if ((features[j] & 0x80) == 0) { + if (op_is_dev_features) + break; + op_is_dev_features = true; + } + } + if (!op_is_dev_features || j == feature_sz) { + dprintk(1, "malformed features\n"); + return -EINVAL; + } + /* Zero unused part of the feature array */ + memset(features + j + 1, 0, feature_sz - j - 1); + } + + if (log_addrs->cec_version >= CEC_OP_CEC_VERSION_2_0) { + if (log_addrs->num_log_addrs > 2) { + dprintk(1, "CEC 2.0 allows no more than 2 logical addresses\n"); + return -EINVAL; + } + if (log_addrs->num_log_addrs == 2) { + if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) | + (1 << CEC_LOG_ADDR_TYPE_TV)))) { + dprintk(1, "two LAs is only allowed for audiosystem and TV\n"); + return -EINVAL; + } + if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) | + (1 << CEC_LOG_ADDR_TYPE_RECORD)))) { + dprintk(1, "an audiosystem/TV can only be combined with record or playback\n"); + return -EINVAL; + } + } + } + + /* Zero unused LAs */ + for (i = log_addrs->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) { + log_addrs->primary_device_type[i] = 0; + log_addrs->log_addr_type[i] = 0; + log_addrs->all_device_types[i] = 0; + memset(log_addrs->features[i], 0, + sizeof(log_addrs->features[i])); + } + + log_addrs->log_addr_mask = adap->log_addrs.log_addr_mask; + adap->log_addrs = *log_addrs; + if (adap->phys_addr != CEC_PHYS_ADDR_INVALID) + cec_claim_log_addrs(adap, block); + return 0; +} + +int cec_s_log_addrs(struct cec_adapter *adap, + struct cec_log_addrs *log_addrs, bool block) +{ + int err; + + mutex_lock(&adap->lock); + err = __cec_s_log_addrs(adap, log_addrs, block); + mutex_unlock(&adap->lock); + return err; +} +EXPORT_SYMBOL_GPL(cec_s_log_addrs); + +/* High-level core CEC message handling */ + +/* Fill in the Report Features message */ +static void cec_fill_msg_report_features(struct cec_adapter *adap, + struct cec_msg *msg, + unsigned int la_idx) +{ + const struct cec_log_addrs *las = &adap->log_addrs; + const u8 *features = las->features[la_idx]; + bool op_is_dev_features = false; + unsigned int idx; + + /* Report Features */ + msg->msg[0] = (las->log_addr[la_idx] << 4) | 0x0f; + msg->len = 4; + msg->msg[1] = CEC_MSG_REPORT_FEATURES; + msg->msg[2] = adap->log_addrs.cec_version; + msg->msg[3] = las->all_device_types[la_idx]; + + /* Write RC Profiles first, then Device Features */ + for (idx = 0; idx < ARRAY_SIZE(las->features[0]); idx++) { + msg->msg[msg->len++] = features[idx]; + if ((features[idx] & CEC_OP_FEAT_EXT) == 0) { + if (op_is_dev_features) + break; + op_is_dev_features = true; + } + } +} + +/* Transmit the Feature Abort message */ +static int cec_feature_abort_reason(struct cec_adapter *adap, + struct cec_msg *msg, u8 reason) +{ + struct cec_msg tx_msg = { }; + + /* + * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT + * message! + */ + if (msg->msg[1] == CEC_MSG_FEATURE_ABORT) + return 0; + /* Don't Feature Abort messages from 'Unregistered' */ + if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED) + return 0; + cec_msg_set_reply_to(&tx_msg, msg); + cec_msg_feature_abort(&tx_msg, msg->msg[1], reason); + return cec_transmit_msg(adap, &tx_msg, false); +} + +static int cec_feature_abort(struct cec_adapter *adap, struct cec_msg *msg) +{ + return cec_feature_abort_reason(adap, msg, + CEC_OP_ABORT_UNRECOGNIZED_OP); +} + +static int cec_feature_refused(struct cec_adapter *adap, struct cec_msg *msg) +{ + return cec_feature_abort_reason(adap, msg, + CEC_OP_ABORT_REFUSED); +} + +/* + * Called when a CEC message is received. This function will do any + * necessary core processing. The is_reply bool is true if this message + * is a reply to an earlier transmit. + * + * The message is either a broadcast message or a valid directed message. + */ +static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, + bool is_reply) +{ + bool is_broadcast = cec_msg_is_broadcast(msg); + u8 dest_laddr = cec_msg_destination(msg); + u8 init_laddr = cec_msg_initiator(msg); + u8 devtype = cec_log_addr2dev(adap, dest_laddr); + int la_idx = cec_log_addr2idx(adap, dest_laddr); + bool from_unregistered = init_laddr == 0xf; + struct cec_msg tx_cec_msg = { }; + + dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg); + + /* If this is a CDC-Only device, then ignore any non-CDC messages */ + if (cec_is_cdc_only(&adap->log_addrs) && + msg->msg[1] != CEC_MSG_CDC_MESSAGE) + return 0; + + if (adap->ops->received) { + /* Allow drivers to process the message first */ + if (adap->ops->received(adap, msg) != -ENOMSG) + return 0; + } + + /* + * REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and + * CEC_MSG_USER_CONTROL_RELEASED messages always have to be + * handled by the CEC core, even if the passthrough mode is on. + * The others are just ignored if passthrough mode is on. + */ + switch (msg->msg[1]) { + case CEC_MSG_GET_CEC_VERSION: + case CEC_MSG_ABORT: + case CEC_MSG_GIVE_DEVICE_POWER_STATUS: + case CEC_MSG_GIVE_OSD_NAME: + /* + * These messages reply with a directed message, so ignore if + * the initiator is Unregistered. + */ + if (!adap->passthrough && from_unregistered) + return 0; + /* Fall through */ + case CEC_MSG_GIVE_DEVICE_VENDOR_ID: + case CEC_MSG_GIVE_FEATURES: + case CEC_MSG_GIVE_PHYSICAL_ADDR: + /* + * Skip processing these messages if the passthrough mode + * is on. + */ + if (adap->passthrough) + goto skip_processing; + /* Ignore if addressing is wrong */ + if (is_broadcast) + return 0; + break; + + case CEC_MSG_USER_CONTROL_PRESSED: + case CEC_MSG_USER_CONTROL_RELEASED: + /* Wrong addressing mode: don't process */ + if (is_broadcast || from_unregistered) + goto skip_processing; + break; + + case CEC_MSG_REPORT_PHYSICAL_ADDR: + /* + * This message is always processed, regardless of the + * passthrough setting. + * + * Exception: don't process if wrong addressing mode. + */ + if (!is_broadcast) + goto skip_processing; + break; + + default: + break; + } + + cec_msg_set_reply_to(&tx_cec_msg, msg); + + switch (msg->msg[1]) { + /* The following messages are processed but still passed through */ + case CEC_MSG_REPORT_PHYSICAL_ADDR: { + u16 pa = (msg->msg[2] << 8) | msg->msg[3]; + + if (!from_unregistered) + adap->phys_addrs[init_laddr] = pa; + dprintk(1, "reported physical address %x.%x.%x.%x for logical address %d\n", + cec_phys_addr_exp(pa), init_laddr); + break; + } + + case CEC_MSG_USER_CONTROL_PRESSED: + if (!(adap->capabilities & CEC_CAP_RC) || + !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU)) + break; + +#ifdef CONFIG_MEDIA_CEC_RC + switch (msg->msg[2]) { + /* + * Play function, this message can have variable length + * depending on the specific play function that is used. + */ + case 0x60: + if (msg->len == 2) + rc_keydown(adap->rc, RC_PROTO_CEC, + msg->msg[2], 0); + else + rc_keydown(adap->rc, RC_PROTO_CEC, + msg->msg[2] << 8 | msg->msg[3], 0); + break; + /* + * Other function messages that are not handled. + * Currently the RC framework does not allow to supply an + * additional parameter to a keypress. These "keys" contain + * other information such as channel number, an input number + * etc. + * For the time being these messages are not processed by the + * framework and are simply forwarded to the user space. + */ + case 0x56: case 0x57: + case 0x67: case 0x68: case 0x69: case 0x6a: + break; + default: + rc_keydown(adap->rc, RC_PROTO_CEC, msg->msg[2], 0); + break; + } +#endif + break; + + case CEC_MSG_USER_CONTROL_RELEASED: + if (!(adap->capabilities & CEC_CAP_RC) || + !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU)) + break; +#ifdef CONFIG_MEDIA_CEC_RC + rc_keyup(adap->rc); +#endif + break; + + /* + * The remaining messages are only processed if the passthrough mode + * is off. + */ + case CEC_MSG_GET_CEC_VERSION: + cec_msg_cec_version(&tx_cec_msg, adap->log_addrs.cec_version); + return cec_transmit_msg(adap, &tx_cec_msg, false); + + case CEC_MSG_GIVE_PHYSICAL_ADDR: + /* Do nothing for CEC switches using addr 15 */ + if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH && dest_laddr == 15) + return 0; + cec_msg_report_physical_addr(&tx_cec_msg, adap->phys_addr, devtype); + return cec_transmit_msg(adap, &tx_cec_msg, false); + + case CEC_MSG_GIVE_DEVICE_VENDOR_ID: + if (adap->log_addrs.vendor_id == CEC_VENDOR_ID_NONE) + return cec_feature_abort(adap, msg); + cec_msg_device_vendor_id(&tx_cec_msg, adap->log_addrs.vendor_id); + return cec_transmit_msg(adap, &tx_cec_msg, false); + + case CEC_MSG_ABORT: + /* Do nothing for CEC switches */ + if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH) + return 0; + return cec_feature_refused(adap, msg); + + case CEC_MSG_GIVE_OSD_NAME: { + if (adap->log_addrs.osd_name[0] == 0) + return cec_feature_abort(adap, msg); + cec_msg_set_osd_name(&tx_cec_msg, adap->log_addrs.osd_name); + return cec_transmit_msg(adap, &tx_cec_msg, false); + } + + case CEC_MSG_GIVE_FEATURES: + if (adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0) + return cec_feature_abort(adap, msg); + cec_fill_msg_report_features(adap, &tx_cec_msg, la_idx); + return cec_transmit_msg(adap, &tx_cec_msg, false); + + default: + /* + * Unprocessed messages are aborted if userspace isn't doing + * any processing either. + */ + if (!is_broadcast && !is_reply && !adap->follower_cnt && + !adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT) + return cec_feature_abort(adap, msg); + break; + } + +skip_processing: + /* If this was a reply, then we're done, unless otherwise specified */ + if (is_reply && !(msg->flags & CEC_MSG_FL_REPLY_TO_FOLLOWERS)) + return 0; + + /* + * Send to the exclusive follower if there is one, otherwise send + * to all followers. + */ + if (adap->cec_follower) + cec_queue_msg_fh(adap->cec_follower, msg); + else + cec_queue_msg_followers(adap, msg); + return 0; +} + +/* + * Helper functions to keep track of the 'monitor all' use count. + * + * These functions are called with adap->lock held. + */ +int cec_monitor_all_cnt_inc(struct cec_adapter *adap) +{ + int ret = 0; + + if (adap->monitor_all_cnt == 0) + ret = call_op(adap, adap_monitor_all_enable, 1); + if (ret == 0) + adap->monitor_all_cnt++; + return ret; +} + +void cec_monitor_all_cnt_dec(struct cec_adapter *adap) +{ + adap->monitor_all_cnt--; + if (adap->monitor_all_cnt == 0) + WARN_ON(call_op(adap, adap_monitor_all_enable, 0)); +} + +/* + * Helper functions to keep track of the 'monitor pin' use count. + * + * These functions are called with adap->lock held. + */ +int cec_monitor_pin_cnt_inc(struct cec_adapter *adap) +{ + int ret = 0; + + if (adap->monitor_pin_cnt == 0) + ret = call_op(adap, adap_monitor_pin_enable, 1); + if (ret == 0) + adap->monitor_pin_cnt++; + return ret; +} + +void cec_monitor_pin_cnt_dec(struct cec_adapter *adap) +{ + adap->monitor_pin_cnt--; + if (adap->monitor_pin_cnt == 0) + WARN_ON(call_op(adap, adap_monitor_pin_enable, 0)); +} + +#ifdef CONFIG_DEBUG_FS +/* + * Log the current state of the CEC adapter. + * Very useful for debugging. + */ +int cec_adap_status(struct seq_file *file, void *priv) +{ + struct cec_adapter *adap = dev_get_drvdata(file->private); + struct cec_data *data; + + mutex_lock(&adap->lock); + seq_printf(file, "configured: %d\n", adap->is_configured); + seq_printf(file, "configuring: %d\n", adap->is_configuring); + seq_printf(file, "phys_addr: %x.%x.%x.%x\n", + cec_phys_addr_exp(adap->phys_addr)); + seq_printf(file, "number of LAs: %d\n", adap->log_addrs.num_log_addrs); + seq_printf(file, "LA mask: 0x%04x\n", adap->log_addrs.log_addr_mask); + if (adap->cec_follower) + seq_printf(file, "has CEC follower%s\n", + adap->passthrough ? " (in passthrough mode)" : ""); + if (adap->cec_initiator) + seq_puts(file, "has CEC initiator\n"); + if (adap->monitor_all_cnt) + seq_printf(file, "file handles in Monitor All mode: %u\n", + adap->monitor_all_cnt); + if (adap->tx_timeouts) { + seq_printf(file, "transmit timeouts: %u\n", + adap->tx_timeouts); + adap->tx_timeouts = 0; + } + data = adap->transmitting; + if (data) + seq_printf(file, "transmitting message: %*ph (reply: %02x, timeout: %ums)\n", + data->msg.len, data->msg.msg, data->msg.reply, + data->msg.timeout); + seq_printf(file, "pending transmits: %u\n", adap->transmit_queue_sz); + list_for_each_entry(data, &adap->transmit_queue, list) { + seq_printf(file, "queued tx message: %*ph (reply: %02x, timeout: %ums)\n", + data->msg.len, data->msg.msg, data->msg.reply, + data->msg.timeout); + } + list_for_each_entry(data, &adap->wait_queue, list) { + seq_printf(file, "message waiting for reply: %*ph (reply: %02x, timeout: %ums)\n", + data->msg.len, data->msg.msg, data->msg.reply, + data->msg.timeout); + } + + call_void_op(adap, adap_status, file); + mutex_unlock(&adap->lock); + return 0; +} +#endif |