diff options
Diffstat (limited to 'drivers/media/dvb-frontends/m88ds3103.h')
| -rw-r--r-- | drivers/media/dvb-frontends/m88ds3103.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/m88ds3103.h b/drivers/media/dvb-frontends/m88ds3103.h new file mode 100644 index 000000000..1a8964a22 --- /dev/null +++ b/drivers/media/dvb-frontends/m88ds3103.h @@ -0,0 +1,167 @@ +/* + * Montage Technology M88DS3103/M88RS6000 demodulator driver + * + * Copyright (C) 2013 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef M88DS3103_H +#define M88DS3103_H + +#include <linux/dvb/frontend.h> + +/* + * I2C address + * 0x68, + */ + +/** + * enum m88ds3103_ts_mode - TS connection mode + * @M88DS3103_TS_SERIAL: TS output pin D0, normal + * @M88DS3103_TS_SERIAL_D7: TS output pin D7 + * @M88DS3103_TS_PARALLEL: TS Parallel mode + * @M88DS3103_TS_CI: TS CI Mode + */ +enum m88ds3103_ts_mode { + M88DS3103_TS_SERIAL, + M88DS3103_TS_SERIAL_D7, + M88DS3103_TS_PARALLEL, + M88DS3103_TS_CI +}; + +/** + * enum m88ds3103_clock_out + * @M88DS3103_CLOCK_OUT_DISABLED: Clock output is disabled + * @M88DS3103_CLOCK_OUT_ENABLED: Clock output is enabled with crystal + * clock. + * @M88DS3103_CLOCK_OUT_ENABLED_DIV2: Clock output is enabled with half + * crystal clock. + */ +enum m88ds3103_clock_out { + M88DS3103_CLOCK_OUT_DISABLED, + M88DS3103_CLOCK_OUT_ENABLED, + M88DS3103_CLOCK_OUT_ENABLED_DIV2 +}; + +/** + * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver + * @clk: Clock frequency. + * @i2c_wr_max: Max bytes I2C adapter can write at once. + * @ts_mode: TS mode. + * @ts_clk: TS clock (KHz). + * @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising + * edge. + * @spec_inv: Input spectrum inversion. + * @agc: AGC configuration. + * @agc_inv: AGC polarity. + * @clk_out: Clock output. + * @envelope_mode: DiSEqC envelope mode. + * @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to + * set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18. + * @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to + * enable. 1: pin high to enable, pin low to disable. + * @get_dvb_frontend: Get DVB frontend. + * @get_i2c_adapter: Get I2C adapter. + */ +struct m88ds3103_platform_data { + u32 clk; + u16 i2c_wr_max; + enum m88ds3103_ts_mode ts_mode; + u32 ts_clk; + enum m88ds3103_clock_out clk_out; + u8 ts_clk_pol:1; + u8 spec_inv:1; + u8 agc; + u8 agc_inv:1; + u8 envelope_mode:1; + u8 lnb_hv_pol:1; + u8 lnb_en_pol:1; + + struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *); + struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *); + +/* private: For legacy media attach wrapper. Do not set value. */ + u8 attach_in_use:1; +}; + +/** + * struct m88ds3103_config - m88ds3102 configuration + * + * @i2c_addr: I2C address. Default: none, must set. Example: 0x68, ... + * @clock: Device's clock. Default: none, must set. Example: 27000000 + * @i2c_wr_max: Max bytes I2C provider is asked to write at once. + * Default: none, must set. Example: 33, 65, ... + * @ts_mode: TS output mode, as defined by &enum m88ds3103_ts_mode. + * Default: M88DS3103_TS_SERIAL. + * @ts_clk: TS clk in KHz. Default: 0. + * @ts_clk_pol: TS clk polarity.Default: 0. + * 1-active at falling edge; 0-active at rising edge. + * @spec_inv: Spectrum inversion. Default: 0. + * @agc_inv: AGC polarity. Default: 0. + * @clock_out: Clock output, as defined by &enum m88ds3103_clock_out. + * Default: M88DS3103_CLOCK_OUT_DISABLED. + * @envelope_mode: DiSEqC envelope mode. Default: 0. + * @agc: AGC configuration. Default: none, must set. + * @lnb_hv_pol: LNB H/V pin polarity. Default: 0. Values: + * 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18; + * 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13. + * @lnb_en_pol: LNB enable pin polarity. Default: 0. Values: + * 1: pin high to enable, pin low to disable; + * 0: pin high to disable, pin low to enable. + */ +struct m88ds3103_config { + u8 i2c_addr; + u32 clock; + u16 i2c_wr_max; + u8 ts_mode; + u32 ts_clk; + u8 ts_clk_pol:1; + u8 spec_inv:1; + u8 agc_inv:1; + u8 clock_out; + u8 envelope_mode:1; + u8 agc; + u8 lnb_hv_pol:1; + u8 lnb_en_pol:1; +}; + +#if defined(CONFIG_DVB_M88DS3103) || \ + (defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE)) +/** + * Attach a m88ds3103 demod + * + * @config: pointer to &struct m88ds3103_config with demod configuration. + * @i2c: i2c adapter to use. + * @tuner_i2c: on success, returns the I2C adapter associated with + * m88ds3103 tuner. + * + * return: FE pointer on success, NULL on failure. + * Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead. + */ +extern struct dvb_frontend *m88ds3103_attach( + const struct m88ds3103_config *config, + struct i2c_adapter *i2c, + struct i2c_adapter **tuner_i2c); +extern int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm); +#else +static inline struct dvb_frontend *m88ds3103_attach( + const struct m88ds3103_config *config, + struct i2c_adapter *i2c, + struct i2c_adapter **tuner_i2c) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#define m88ds3103_get_agc_pwm NULL +#endif + +#endif |