diff options
Diffstat (limited to 'drivers/media/i2c/lm3560.c')
-rw-r--r-- | drivers/media/i2c/lm3560.c | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c new file mode 100644 index 000000000..49c6644cb --- /dev/null +++ b/drivers/media/i2c/lm3560.c @@ -0,0 +1,490 @@ +/* + * drivers/media/i2c/lm3560.c + * General device driver for TI lm3559, lm3560, FLASH LED Driver + * + * Copyright (C) 2013 Texas Instruments + * + * Contact: Daniel Jeong <gshark.jeong@gmail.com> + * Ldd-Mlp <ldd-mlp@list.ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/videodev2.h> +#include <media/i2c/lm3560.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> + +/* registers definitions */ +#define REG_ENABLE 0x10 +#define REG_TORCH_BR 0xa0 +#define REG_FLASH_BR 0xb0 +#define REG_FLASH_TOUT 0xc0 +#define REG_FLAG 0xd0 +#define REG_CONFIG1 0xe0 + +/* fault mask */ +#define FAULT_TIMEOUT (1<<0) +#define FAULT_OVERTEMP (1<<1) +#define FAULT_SHORT_CIRCUIT (1<<2) + +enum led_enable { + MODE_SHDN = 0x0, + MODE_TORCH = 0x2, + MODE_FLASH = 0x3, +}; + +/** + * struct lm3560_flash + * + * @dev: pointer to &struct device + * @pdata: platform data + * @regmap: reg. map for i2c + * @lock: muxtex for serial access. + * @led_mode: V4L2 LED mode + * @ctrls_led: V4L2 contols + * @subdev_led: V4L2 subdev + */ +struct lm3560_flash { + struct device *dev; + struct lm3560_platform_data *pdata; + struct regmap *regmap; + struct mutex lock; + + enum v4l2_flash_led_mode led_mode; + struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX]; + struct v4l2_subdev subdev_led[LM3560_LED_MAX]; +}; + +#define to_lm3560_flash(_ctrl, _no) \ + container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no]) + +/* enable mode control */ +static int lm3560_mode_ctrl(struct lm3560_flash *flash) +{ + int rval = -EINVAL; + + switch (flash->led_mode) { + case V4L2_FLASH_LED_MODE_NONE: + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x03, MODE_SHDN); + break; + case V4L2_FLASH_LED_MODE_TORCH: + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x03, MODE_TORCH); + break; + case V4L2_FLASH_LED_MODE_FLASH: + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x03, MODE_FLASH); + break; + } + return rval; +} + +/* led1/2 enable/disable */ +static int lm3560_enable_ctrl(struct lm3560_flash *flash, + enum lm3560_led_id led_no, bool on) +{ + int rval; + + if (led_no == LM3560_LED0) { + if (on) + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x08, 0x08); + else + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x08, 0x00); + } else { + if (on) + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x10, 0x10); + else + rval = regmap_update_bits(flash->regmap, + REG_ENABLE, 0x10, 0x00); + } + return rval; +} + +/* torch1/2 brightness control */ +static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash, + enum lm3560_led_id led_no, unsigned int brt) +{ + int rval; + u8 br_bits; + + if (brt < LM3560_TORCH_BRT_MIN) + return lm3560_enable_ctrl(flash, led_no, false); + else + rval = lm3560_enable_ctrl(flash, led_no, true); + + br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt); + if (led_no == LM3560_LED0) + rval = regmap_update_bits(flash->regmap, + REG_TORCH_BR, 0x07, br_bits); + else + rval = regmap_update_bits(flash->regmap, + REG_TORCH_BR, 0x38, br_bits << 3); + + return rval; +} + +/* flash1/2 brightness control */ +static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash, + enum lm3560_led_id led_no, unsigned int brt) +{ + int rval; + u8 br_bits; + + if (brt < LM3560_FLASH_BRT_MIN) + return lm3560_enable_ctrl(flash, led_no, false); + else + rval = lm3560_enable_ctrl(flash, led_no, true); + + br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt); + if (led_no == LM3560_LED0) + rval = regmap_update_bits(flash->regmap, + REG_FLASH_BR, 0x0f, br_bits); + else + rval = regmap_update_bits(flash->regmap, + REG_FLASH_BR, 0xf0, br_bits << 4); + + return rval; +} + +/* v4l2 controls */ +static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no) +{ + struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no); + int rval = -EINVAL; + + mutex_lock(&flash->lock); + + if (ctrl->id == V4L2_CID_FLASH_FAULT) { + s32 fault = 0; + unsigned int reg_val; + rval = regmap_read(flash->regmap, REG_FLAG, ®_val); + if (rval < 0) + goto out; + if (reg_val & FAULT_SHORT_CIRCUIT) + fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (reg_val & FAULT_OVERTEMP) + fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (reg_val & FAULT_TIMEOUT) + fault |= V4L2_FLASH_FAULT_TIMEOUT; + ctrl->cur.val = fault; + } + +out: + mutex_unlock(&flash->lock); + return rval; +} + +static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no) +{ + struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no); + u8 tout_bits; + int rval = -EINVAL; + + mutex_lock(&flash->lock); + + switch (ctrl->id) { + case V4L2_CID_FLASH_LED_MODE: + flash->led_mode = ctrl->val; + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + rval = lm3560_mode_ctrl(flash); + break; + + case V4L2_CID_FLASH_STROBE_SOURCE: + rval = regmap_update_bits(flash->regmap, + REG_CONFIG1, 0x04, (ctrl->val) << 2); + if (rval < 0) + goto err_out; + break; + + case V4L2_CID_FLASH_STROBE: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { + rval = -EBUSY; + goto err_out; + } + flash->led_mode = V4L2_FLASH_LED_MODE_FLASH; + rval = lm3560_mode_ctrl(flash); + break; + + case V4L2_CID_FLASH_STROBE_STOP: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { + rval = -EBUSY; + goto err_out; + } + flash->led_mode = V4L2_FLASH_LED_MODE_NONE; + rval = lm3560_mode_ctrl(flash); + break; + + case V4L2_CID_FLASH_TIMEOUT: + tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val); + rval = regmap_update_bits(flash->regmap, + REG_FLASH_TOUT, 0x1f, tout_bits); + break; + + case V4L2_CID_FLASH_INTENSITY: + rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val); + break; + + case V4L2_CID_FLASH_TORCH_INTENSITY: + rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val); + break; + } + +err_out: + mutex_unlock(&flash->lock); + return rval; +} + +static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl) +{ + return lm3560_get_ctrl(ctrl, LM3560_LED1); +} + +static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl) +{ + return lm3560_set_ctrl(ctrl, LM3560_LED1); +} + +static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl) +{ + return lm3560_get_ctrl(ctrl, LM3560_LED0); +} + +static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl) +{ + return lm3560_set_ctrl(ctrl, LM3560_LED0); +} + +static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = { + [LM3560_LED0] = { + .g_volatile_ctrl = lm3560_led0_get_ctrl, + .s_ctrl = lm3560_led0_set_ctrl, + }, + [LM3560_LED1] = { + .g_volatile_ctrl = lm3560_led1_get_ctrl, + .s_ctrl = lm3560_led1_set_ctrl, + } +}; + +static int lm3560_init_controls(struct lm3560_flash *flash, + enum lm3560_led_id led_no) +{ + struct v4l2_ctrl *fault; + u32 max_flash_brt = flash->pdata->max_flash_brt[led_no]; + u32 max_torch_brt = flash->pdata->max_torch_brt[led_no]; + struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no]; + const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no]; + + v4l2_ctrl_handler_init(hdl, 8); + + /* flash mode */ + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE, + V4L2_FLASH_LED_MODE_TORCH, ~0x7, + V4L2_FLASH_LED_MODE_NONE); + flash->led_mode = V4L2_FLASH_LED_MODE_NONE; + + /* flash source */ + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE, + 0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE); + + /* flash strobe */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + + /* flash strobe stop */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + + /* flash strobe timeout */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT, + LM3560_FLASH_TOUT_MIN, + flash->pdata->max_flash_timeout, + LM3560_FLASH_TOUT_STEP, + flash->pdata->max_flash_timeout); + + /* flash brt */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY, + LM3560_FLASH_BRT_MIN, max_flash_brt, + LM3560_FLASH_BRT_STEP, max_flash_brt); + + /* torch brt */ + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY, + LM3560_TORCH_BRT_MIN, max_torch_brt, + LM3560_TORCH_BRT_STEP, max_torch_brt); + + /* fault */ + fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE + | V4L2_FLASH_FAULT_OVER_TEMPERATURE + | V4L2_FLASH_FAULT_SHORT_CIRCUIT + | V4L2_FLASH_FAULT_TIMEOUT, 0, 0); + if (fault != NULL) + fault->flags |= V4L2_CTRL_FLAG_VOLATILE; + + if (hdl->error) + return hdl->error; + + flash->subdev_led[led_no].ctrl_handler = hdl; + return 0; +} + +/* initialize device */ +static const struct v4l2_subdev_ops lm3560_ops = { + .core = NULL, +}; + +static const struct regmap_config lm3560_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xFF, +}; + +static int lm3560_subdev_init(struct lm3560_flash *flash, + enum lm3560_led_id led_no, char *led_name) +{ + struct i2c_client *client = to_i2c_client(flash->dev); + int rval; + + v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops); + flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + strcpy(flash->subdev_led[led_no].name, led_name); + rval = lm3560_init_controls(flash, led_no); + if (rval) + goto err_out; + rval = media_entity_pads_init(&flash->subdev_led[led_no].entity, 0, NULL); + if (rval < 0) + goto err_out; + flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH; + + return rval; + +err_out: + v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]); + return rval; +} + +static int lm3560_init_device(struct lm3560_flash *flash) +{ + int rval; + unsigned int reg_val; + + /* set peak current */ + rval = regmap_update_bits(flash->regmap, + REG_FLASH_TOUT, 0x60, flash->pdata->peak); + if (rval < 0) + return rval; + /* output disable */ + flash->led_mode = V4L2_FLASH_LED_MODE_NONE; + rval = lm3560_mode_ctrl(flash); + if (rval < 0) + return rval; + /* reset faults */ + rval = regmap_read(flash->regmap, REG_FLAG, ®_val); + return rval; +} + +static int lm3560_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct lm3560_flash *flash; + struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev); + int rval; + + flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap); + if (IS_ERR(flash->regmap)) { + rval = PTR_ERR(flash->regmap); + return rval; + } + + /* if there is no platform data, use chip default value */ + if (pdata == NULL) { + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (pdata == NULL) + return -ENODEV; + pdata->peak = LM3560_PEAK_3600mA; + pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX; + /* led 1 */ + pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX; + pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX; + /* led 2 */ + pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX; + pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX; + } + flash->pdata = pdata; + flash->dev = &client->dev; + mutex_init(&flash->lock); + + rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0"); + if (rval < 0) + return rval; + + rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1"); + if (rval < 0) + return rval; + + rval = lm3560_init_device(flash); + if (rval < 0) + return rval; + + i2c_set_clientdata(client, flash); + + return 0; +} + +static int lm3560_remove(struct i2c_client *client) +{ + struct lm3560_flash *flash = i2c_get_clientdata(client); + unsigned int i; + + for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) { + v4l2_device_unregister_subdev(&flash->subdev_led[i]); + v4l2_ctrl_handler_free(&flash->ctrls_led[i]); + media_entity_cleanup(&flash->subdev_led[i].entity); + } + + return 0; +} + +static const struct i2c_device_id lm3560_id_table[] = { + {LM3559_NAME, 0}, + {LM3560_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3560_id_table); + +static struct i2c_driver lm3560_i2c_driver = { + .driver = { + .name = LM3560_NAME, + .pm = NULL, + }, + .probe = lm3560_probe, + .remove = lm3560_remove, + .id_table = lm3560_id_table, +}; + +module_i2c_driver(lm3560_i2c_driver); + +MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); +MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>"); +MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver"); +MODULE_LICENSE("GPL"); |