diff options
Diffstat (limited to 'drivers/media/i2c/saa711x_regs.h')
| -rw-r--r-- | drivers/media/i2c/saa711x_regs.h | 560 |
1 files changed, 560 insertions, 0 deletions
diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h new file mode 100644 index 000000000..44fabe082 --- /dev/null +++ b/drivers/media/i2c/saa711x_regs.h @@ -0,0 +1,560 @@ +/* + * SPDX-License-Identifier: GPL-2.0+ + * saa711x - Philips SAA711x video decoder register specifications + * + * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org> + */ + +#define R_00_CHIP_VERSION 0x00 +/* Video Decoder */ + /* Video Decoder - Frontend part */ +#define R_01_INC_DELAY 0x01 +#define R_02_INPUT_CNTL_1 0x02 +#define R_03_INPUT_CNTL_2 0x03 +#define R_04_INPUT_CNTL_3 0x04 +#define R_05_INPUT_CNTL_4 0x05 + /* Video Decoder - Decoder part */ +#define R_06_H_SYNC_START 0x06 +#define R_07_H_SYNC_STOP 0x07 +#define R_08_SYNC_CNTL 0x08 +#define R_09_LUMA_CNTL 0x09 +#define R_0A_LUMA_BRIGHT_CNTL 0x0a +#define R_0B_LUMA_CONTRAST_CNTL 0x0b +#define R_0C_CHROMA_SAT_CNTL 0x0c +#define R_0D_CHROMA_HUE_CNTL 0x0d +#define R_0E_CHROMA_CNTL_1 0x0e +#define R_0F_CHROMA_GAIN_CNTL 0x0f +#define R_10_CHROMA_CNTL_2 0x10 +#define R_11_MODE_DELAY_CNTL 0x11 +#define R_12_RT_SIGNAL_CNTL 0x12 +#define R_13_RT_X_PORT_OUT_CNTL 0x13 +#define R_14_ANAL_ADC_COMPAT_CNTL 0x14 +#define R_15_VGATE_START_FID_CHG 0x15 +#define R_16_VGATE_STOP 0x16 +#define R_17_MISC_VGATE_CONF_AND_MSB 0x17 +#define R_18_RAW_DATA_GAIN_CNTL 0x18 +#define R_19_RAW_DATA_OFF_CNTL 0x19 +#define R_1A_COLOR_KILL_LVL_CNTL 0x1a +#define R_1B_MISC_TVVCRDET 0x1b +#define R_1C_ENHAN_COMB_CTRL1 0x1c +#define R_1D_ENHAN_COMB_CTRL2 0x1d +#define R_1E_STATUS_BYTE_1_VD_DEC 0x1e +#define R_1F_STATUS_BYTE_2_VD_DEC 0x1f + +/* Component processing and interrupt masking part */ +#define R_23_INPUT_CNTL_5 0x23 +#define R_24_INPUT_CNTL_6 0x24 +#define R_25_INPUT_CNTL_7 0x25 +#define R_29_COMP_DELAY 0x29 +#define R_2A_COMP_BRIGHT_CNTL 0x2a +#define R_2B_COMP_CONTRAST_CNTL 0x2b +#define R_2C_COMP_SAT_CNTL 0x2c +#define R_2D_INTERRUPT_MASK_1 0x2d +#define R_2E_INTERRUPT_MASK_2 0x2e +#define R_2F_INTERRUPT_MASK_3 0x2f + +/* Audio clock generator part */ +#define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30 +#define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34 +#define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38 +#define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39 +#define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a + +/* General purpose VBI data slicer part */ +#define R_40_SLICER_CNTL_1 0x40 +#define R_41_LCR_BASE 0x41 +#define R_58_PROGRAM_FRAMING_CODE 0x58 +#define R_59_H_OFF_FOR_SLICER 0x59 +#define R_5A_V_OFF_FOR_SLICER 0x5a +#define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b +#define R_5D_DID 0x5d +#define R_5E_SDID 0x5e +#define R_60_SLICER_STATUS_BYTE_0 0x60 +#define R_61_SLICER_STATUS_BYTE_1 0x61 +#define R_62_SLICER_STATUS_BYTE_2 0x62 + +/* X port, I port and the scaler part */ + /* Task independent global settings */ +#define R_80_GLOBAL_CNTL_1 0x80 +#define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81 +#define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83 +#define R_84_I_PORT_SIGNAL_DEF 0x84 +#define R_85_I_PORT_SIGNAL_POLAR 0x85 +#define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86 +#define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87 +#define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88 +#define R_8F_STATUS_INFO_SCALER 0x8f + /* Task A definition */ + /* Basic settings and acquisition window definition */ +#define R_90_A_TASK_HANDLING_CNTL 0x90 +#define R_91_A_X_PORT_FORMATS_AND_CONF 0x91 +#define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92 +#define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93 +#define R_94_A_HORIZ_INPUT_WINDOW_START 0x94 +#define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95 +#define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96 +#define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97 +#define R_98_A_VERT_INPUT_WINDOW_START 0x98 +#define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99 +#define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a +#define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b +#define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c +#define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d +#define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e +#define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f + /* FIR filtering and prescaling */ +#define R_A0_A_HORIZ_PRESCALING 0xa0 +#define R_A1_A_ACCUMULATION_LENGTH 0xa1 +#define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2 +#define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4 +#define R_A5_A_LUMA_CONTRAST_CNTL 0xa5 +#define R_A6_A_CHROMA_SATURATION_CNTL 0xa6 + /* Horizontal phase scaling */ +#define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8 +#define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9 +#define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa +#define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac +#define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad +#define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae +#define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf + /* Vertical scaling */ +#define R_B0_A_VERT_LUMA_SCALING_INC 0xb0 +#define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1 +#define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2 +#define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3 +#define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4 +#define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8 +#define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9 +#define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba +#define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb +#define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc +#define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd +#define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe +#define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf + /* Task B definition */ + /* Basic settings and acquisition window definition */ +#define R_C0_B_TASK_HANDLING_CNTL 0xc0 +#define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1 +#define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2 +#define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3 +#define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4 +#define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5 +#define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6 +#define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7 +#define R_C8_B_VERT_INPUT_WINDOW_START 0xc8 +#define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9 +#define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca +#define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb +#define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc +#define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd +#define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce +#define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf + /* FIR filtering and prescaling */ +#define R_D0_B_HORIZ_PRESCALING 0xd0 +#define R_D1_B_ACCUMULATION_LENGTH 0xd1 +#define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2 +#define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4 +#define R_D5_B_LUMA_CONTRAST_CNTL 0xd5 +#define R_D6_B_CHROMA_SATURATION_CNTL 0xd6 + /* Horizontal phase scaling */ +#define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8 +#define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9 +#define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda +#define R_DC_B_HORIZ_CHROMA_SCALING 0xdc +#define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd +#define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde + /* Vertical scaling */ +#define R_E0_B_VERT_LUMA_SCALING_INC 0xe0 +#define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1 +#define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2 +#define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3 +#define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4 +#define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8 +#define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9 +#define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea +#define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb +#define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec +#define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed +#define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee +#define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef + +/* second PLL (PLL2) and Pulsegenerator Programming */ +#define R_F0_LFCO_PER_LINE 0xf0 +#define R_F1_P_I_PARAM_SELECT 0xf1 +#define R_F2_NOMINAL_PLL2_DTO 0xf2 +#define R_F3_PLL_INCREMENT 0xf3 +#define R_F4_PLL2_STATUS 0xf4 +#define R_F5_PULSGEN_LINE_LENGTH 0xf5 +#define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6 +#define R_F7_PULSE_A_POS_MSB 0xf7 +#define R_F8_PULSE_B_POS 0xf8 +#define R_F9_PULSE_B_POS_MSB 0xf9 +#define R_FA_PULSE_C_POS 0xfa +#define R_FB_PULSE_C_POS_MSB 0xfb +#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff + +/* SAA7113 bit-masks */ +#define SAA7113_R_08_HTC_OFFSET 3 +#define SAA7113_R_08_HTC_MASK (0x3 << SAA7113_R_08_HTC_OFFSET) +#define SAA7113_R_08_FSEL 0x40 +#define SAA7113_R_08_AUFD 0x80 + +#define SAA7113_R_10_VRLN_OFFSET 3 +#define SAA7113_R_10_VRLN_MASK (0x1 << SAA7113_R_10_VRLN_OFFSET) +#define SAA7113_R_10_OFTS_OFFSET 6 +#define SAA7113_R_10_OFTS_MASK (0x3 << SAA7113_R_10_OFTS_OFFSET) + +#define SAA7113_R_12_RTS0_OFFSET 0 +#define SAA7113_R_12_RTS0_MASK (0xf << SAA7113_R_12_RTS0_OFFSET) +#define SAA7113_R_12_RTS1_OFFSET 4 +#define SAA7113_R_12_RTS1_MASK (0xf << SAA7113_R_12_RTS1_OFFSET) + +#define SAA7113_R_13_ADLSB_OFFSET 7 +#define SAA7113_R_13_ADLSB_MASK (0x1 << SAA7113_R_13_ADLSB_OFFSET) + +#if 0 +/* Those structs will be used in the future for debug purposes */ +struct saa711x_reg_descr { + u8 reg; + int count; + char *name; +}; + +struct saa711x_reg_descr saa711x_regs[] = { + /* REG COUNT NAME */ + {R_00_CHIP_VERSION,1, + "Chip version"}, + + /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */ + + /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */ + {R_01_INC_DELAY,1, + "Increment delay"}, + {R_02_INPUT_CNTL_1,1, + "Analog input control 1"}, + {R_03_INPUT_CNTL_2,1, + "Analog input control 2"}, + {R_04_INPUT_CNTL_3,1, + "Analog input control 3"}, + {R_05_INPUT_CNTL_4,1, + "Analog input control 4"}, + + /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */ + {R_06_H_SYNC_START,1, + "Horizontal sync start"}, + {R_07_H_SYNC_STOP,1, + "Horizontal sync stop"}, + {R_08_SYNC_CNTL,1, + "Sync control"}, + {R_09_LUMA_CNTL,1, + "Luminance control"}, + {R_0A_LUMA_BRIGHT_CNTL,1, + "Luminance brightness control"}, + {R_0B_LUMA_CONTRAST_CNTL,1, + "Luminance contrast control"}, + {R_0C_CHROMA_SAT_CNTL,1, + "Chrominance saturation control"}, + {R_0D_CHROMA_HUE_CNTL,1, + "Chrominance hue control"}, + {R_0E_CHROMA_CNTL_1,1, + "Chrominance control 1"}, + {R_0F_CHROMA_GAIN_CNTL,1, + "Chrominance gain control"}, + {R_10_CHROMA_CNTL_2,1, + "Chrominance control 2"}, + {R_11_MODE_DELAY_CNTL,1, + "Mode/delay control"}, + {R_12_RT_SIGNAL_CNTL,1, + "RT signal control"}, + {R_13_RT_X_PORT_OUT_CNTL,1, + "RT/X port output control"}, + {R_14_ANAL_ADC_COMPAT_CNTL,1, + "Analog/ADC/compatibility control"}, + {R_15_VGATE_START_FID_CHG, 1, + "VGATE start FID change"}, + {R_16_VGATE_STOP,1, + "VGATE stop"}, + {R_17_MISC_VGATE_CONF_AND_MSB, 1, + "Miscellaneous VGATE configuration and MSBs"}, + {R_18_RAW_DATA_GAIN_CNTL,1, + "Raw data gain control",}, + {R_19_RAW_DATA_OFF_CNTL,1, + "Raw data offset control",}, + {R_1A_COLOR_KILL_LVL_CNTL,1, + "Color Killer Level Control"}, + { R_1B_MISC_TVVCRDET, 1, + "MISC /TVVCRDET"}, + { R_1C_ENHAN_COMB_CTRL1, 1, + "Enhanced comb ctrl1"}, + { R_1D_ENHAN_COMB_CTRL2, 1, + "Enhanced comb ctrl1"}, + {R_1E_STATUS_BYTE_1_VD_DEC,1, + "Status byte 1 video decoder"}, + {R_1F_STATUS_BYTE_2_VD_DEC,1, + "Status byte 2 video decoder"}, + + /* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */ + /* 0x20 to 0x22 - Reserved */ + {R_23_INPUT_CNTL_5,1, + "Analog input control 5"}, + {R_24_INPUT_CNTL_6,1, + "Analog input control 6"}, + {R_25_INPUT_CNTL_7,1, + "Analog input control 7"}, + /* 0x26 to 0x28 - Reserved */ + {R_29_COMP_DELAY,1, + "Component delay"}, + {R_2A_COMP_BRIGHT_CNTL,1, + "Component brightness control"}, + {R_2B_COMP_CONTRAST_CNTL,1, + "Component contrast control"}, + {R_2C_COMP_SAT_CNTL,1, + "Component saturation control"}, + {R_2D_INTERRUPT_MASK_1,1, + "Interrupt mask 1"}, + {R_2E_INTERRUPT_MASK_2,1, + "Interrupt mask 2"}, + {R_2F_INTERRUPT_MASK_3,1, + "Interrupt mask 3"}, + + /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */ + {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3, + "Audio master clock cycles per field"}, + /* 0x33 - Reserved */ + {R_34_AUD_MAST_CLK_NOMINAL_INC,3, + "Audio master clock nominal increment"}, + /* 0x37 - Reserved */ + {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1, + "Clock ratio AMXCLK to ASCLK"}, + {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1, + "Clock ratio ASCLK to ALRCLK"}, + {R_3A_AUD_CLK_GEN_BASIC_SETUP,1, + "Audio clock generator basic setup"}, + /* 0x3b-0x3f - Reserved */ + + /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */ + {R_40_SLICER_CNTL_1,1, + "Slicer control 1"}, + {R_41_LCR,23, + "R_41_LCR"}, + {R_58_PROGRAM_FRAMING_CODE,1, + "Programmable framing code"}, + {R_59_H_OFF_FOR_SLICER,1, + "Horizontal offset for slicer"}, + {R_5A_V_OFF_FOR_SLICER,1, + "Vertical offset for slicer"}, + {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1, + "Field offset and MSBs for horizontal and vertical offset"}, + {R_5D_DID,1, + "Header and data identification (R_5D_DID)"}, + {R_5E_SDID,1, + "Sliced data identification (R_5E_SDID) code"}, + {R_60_SLICER_STATUS_BYTE_0,1, + "Slicer status byte 0"}, + {R_61_SLICER_STATUS_BYTE_1,1, + "Slicer status byte 1"}, + {R_62_SLICER_STATUS_BYTE_2,1, + "Slicer status byte 2"}, + /* 0x63-0x7f - Reserved */ + + /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ + /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */ + {R_80_GLOBAL_CNTL_1,1, + "Global control 1"}, + {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1, + "Vertical sync and Field ID source selection, retimed V and F signals"}, + /* 0x82 - Reserved */ + {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1, + "X port I/O enable and output clock"}, + {R_84_I_PORT_SIGNAL_DEF,1, + "I port signal definitions"}, + {R_85_I_PORT_SIGNAL_POLAR,1, + "I port signal polarities"}, + {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1, + "I port FIFO flag control and arbitration"}, + {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1, + "I port I/O enable output clock and gated"}, + {R_88_POWER_SAVE_ADC_PORT_CNTL,1, + "Power save/ADC port control"}, + /* 089-0x8e - Reserved */ + {R_8F_STATUS_INFO_SCALER,1, + "Status information scaler part"}, + + /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */ + /* Task A: Basic settings and acquisition window definition */ + {R_90_A_TASK_HANDLING_CNTL,1, + "Task A: Task handling control"}, + {R_91_A_X_PORT_FORMATS_AND_CONF,1, + "Task A: X port formats and configuration"}, + {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1, + "Task A: X port input reference signal definition"}, + {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1, + "Task A: I port output formats and configuration"}, + {R_94_A_HORIZ_INPUT_WINDOW_START,2, + "Task A: Horizontal input window start"}, + {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2, + "Task A: Horizontal input window length"}, + {R_98_A_VERT_INPUT_WINDOW_START,2, + "Task A: Vertical input window start"}, + {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2, + "Task A: Vertical input window length"}, + {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2, + "Task A: Horizontal output window length"}, + {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2, + "Task A: Vertical output window length"}, + + /* Task A: FIR filtering and prescaling */ + {R_A0_A_HORIZ_PRESCALING,1, + "Task A: Horizontal prescaling"}, + {R_A1_A_ACCUMULATION_LENGTH,1, + "Task A: Accumulation length"}, + {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, + "Task A: Prescaler DC gain and FIR prefilter"}, + /* 0xa3 - Reserved */ + {R_A4_A_LUMA_BRIGHTNESS_CNTL,1, + "Task A: Luminance brightness control"}, + {R_A5_A_LUMA_CONTRAST_CNTL,1, + "Task A: Luminance contrast control"}, + {R_A6_A_CHROMA_SATURATION_CNTL,1, + "Task A: Chrominance saturation control"}, + /* 0xa7 - Reserved */ + + /* Task A: Horizontal phase scaling */ + {R_A8_A_HORIZ_LUMA_SCALING_INC,2, + "Task A: Horizontal luminance scaling increment"}, + {R_AA_A_HORIZ_LUMA_PHASE_OFF,1, + "Task A: Horizontal luminance phase offset"}, + /* 0xab - Reserved */ + {R_AC_A_HORIZ_CHROMA_SCALING_INC,2, + "Task A: Horizontal chrominance scaling increment"}, + {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1, + "Task A: Horizontal chrominance phase offset"}, + /* 0xaf - Reserved */ + + /* Task A: Vertical scaling */ + {R_B0_A_VERT_LUMA_SCALING_INC,2, + "Task A: Vertical luminance scaling increment"}, + {R_B2_A_VERT_CHROMA_SCALING_INC,2, + "Task A: Vertical chrominance scaling increment"}, + {R_B4_A_VERT_SCALING_MODE_CNTL,1, + "Task A: Vertical scaling mode control"}, + /* 0xb5-0xb7 - Reserved */ + {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1, + "Task A: Vertical chrominance phase offset '00'"}, + {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1, + "Task A: Vertical chrominance phase offset '01'"}, + {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1, + "Task A: Vertical chrominance phase offset '10'"}, + {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1, + "Task A: Vertical chrominance phase offset '11'"}, + {R_BC_A_VERT_LUMA_PHASE_OFF_00,1, + "Task A: Vertical luminance phase offset '00'"}, + {R_BD_A_VERT_LUMA_PHASE_OFF_01,1, + "Task A: Vertical luminance phase offset '01'"}, + {R_BE_A_VERT_LUMA_PHASE_OFF_10,1, + "Task A: Vertical luminance phase offset '10'"}, + {R_BF_A_VERT_LUMA_PHASE_OFF_11,1, + "Task A: Vertical luminance phase offset '11'"}, + + /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ + /* Task B: Basic settings and acquisition window definition */ + {R_C0_B_TASK_HANDLING_CNTL,1, + "Task B: Task handling control"}, + {R_C1_B_X_PORT_FORMATS_AND_CONF,1, + "Task B: X port formats and configuration"}, + {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1, + "Task B: Input reference signal definition"}, + {R_C3_B_I_PORT_FORMATS_AND_CONF,1, + "Task B: I port formats and configuration"}, + {R_C4_B_HORIZ_INPUT_WINDOW_START,2, + "Task B: Horizontal input window start"}, + {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2, + "Task B: Horizontal input window length"}, + {R_C8_B_VERT_INPUT_WINDOW_START,2, + "Task B: Vertical input window start"}, + {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2, + "Task B: Vertical input window length"}, + {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2, + "Task B: Horizontal output window length"}, + {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2, + "Task B: Vertical output window length"}, + + /* Task B: FIR filtering and prescaling */ + {R_D0_B_HORIZ_PRESCALING,1, + "Task B: Horizontal prescaling"}, + {R_D1_B_ACCUMULATION_LENGTH,1, + "Task B: Accumulation length"}, + {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, + "Task B: Prescaler DC gain and FIR prefilter"}, + /* 0xd3 - Reserved */ + {R_D4_B_LUMA_BRIGHTNESS_CNTL,1, + "Task B: Luminance brightness control"}, + {R_D5_B_LUMA_CONTRAST_CNTL,1, + "Task B: Luminance contrast control"}, + {R_D6_B_CHROMA_SATURATION_CNTL,1, + "Task B: Chrominance saturation control"}, + /* 0xd7 - Reserved */ + + /* Task B: Horizontal phase scaling */ + {R_D8_B_HORIZ_LUMA_SCALING_INC,2, + "Task B: Horizontal luminance scaling increment"}, + {R_DA_B_HORIZ_LUMA_PHASE_OFF,1, + "Task B: Horizontal luminance phase offset"}, + /* 0xdb - Reserved */ + {R_DC_B_HORIZ_CHROMA_SCALING,2, + "Task B: Horizontal chrominance scaling"}, + {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1, + "Task B: Horizontal Phase Offset Chroma"}, + /* 0xdf - Reserved */ + + /* Task B: Vertical scaling */ + {R_E0_B_VERT_LUMA_SCALING_INC,2, + "Task B: Vertical luminance scaling increment"}, + {R_E2_B_VERT_CHROMA_SCALING_INC,2, + "Task B: Vertical chrominance scaling increment"}, + {R_E4_B_VERT_SCALING_MODE_CNTL,1, + "Task B: Vertical scaling mode control"}, + /* 0xe5-0xe7 - Reserved */ + {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1, + "Task B: Vertical chrominance phase offset '00'"}, + {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1, + "Task B: Vertical chrominance phase offset '01'"}, + {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1, + "Task B: Vertical chrominance phase offset '10'"}, + {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1, + "Task B: Vertical chrominance phase offset '11'"}, + {R_EC_B_VERT_LUMA_PHASE_OFF_00,1, + "Task B: Vertical luminance phase offset '00'"}, + {R_ED_B_VERT_LUMA_PHASE_OFF_01,1, + "Task B: Vertical luminance phase offset '01'"}, + {R_EE_B_VERT_LUMA_PHASE_OFF_10,1, + "Task B: Vertical luminance phase offset '10'"}, + {R_EF_B_VERT_LUMA_PHASE_OFF_11,1, + "Task B: Vertical luminance phase offset '11'"}, + + /* second PLL (PLL2) and Pulsegenerator Programming */ + { R_F0_LFCO_PER_LINE, 1, + "LFCO's per line"}, + { R_F1_P_I_PARAM_SELECT,1, + "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"}, + { R_F2_NOMINAL_PLL2_DTO,1, + "Nominal PLL2 DTO"}, + {R_F3_PLL_INCREMENT,1, + "PLL2 Increment"}, + {R_F4_PLL2_STATUS,1, + "PLL2 Status"}, + {R_F5_PULSGEN_LINE_LENGTH,1, + "Pulsgen. line length"}, + {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1, + "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"}, + {R_F7_PULSE_A_POS_MSB,1, + "Pulse A Position"}, + {R_F8_PULSE_B_POS,2, + "Pulse B Position"}, + {R_FA_PULSE_C_POS,2, + "Pulse C Position"}, + /* 0xfc to 0xfe - Reserved */ + {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1, + "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"}, +}; +#endif |