diff options
Diffstat (limited to 'drivers/media/rc/ene_ir.c')
| -rw-r--r-- | drivers/media/rc/ene_ir.c | 1211 |
1 files changed, 1211 insertions, 0 deletions
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c new file mode 100644 index 000000000..71b8c9bbf --- /dev/null +++ b/drivers/media/rc/ene_ir.c @@ -0,0 +1,1211 @@ +/* + * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX) + * + * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * Special thanks to: + * Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore + * bringing to life support for transmission & learning mode. + * + * Charlie Andrews <charliethepilot@googlemail.com> for lots of help in + * bringing up the support of new firmware buffer that is popular + * on latest notebooks + * + * ENE for partial device documentation + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pnp.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <media/rc-core.h> +#include "ene_ir.h" + +static int sample_period; +static bool learning_mode_force; +static int debug; +static bool txsim; + +static void ene_set_reg_addr(struct ene_device *dev, u16 reg) +{ + outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); + outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); +} + +/* read a hardware register */ +static u8 ene_read_reg(struct ene_device *dev, u16 reg) +{ + u8 retval; + ene_set_reg_addr(dev, reg); + retval = inb(dev->hw_io + ENE_IO); + dbg_regs("reg %04x == %02x", reg, retval); + return retval; +} + +/* write a hardware register */ +static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value) +{ + dbg_regs("reg %04x <- %02x", reg, value); + ene_set_reg_addr(dev, reg); + outb(value, dev->hw_io + ENE_IO); +} + +/* Set bits in hardware register */ +static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask) +{ + dbg_regs("reg %04x |= %02x", reg, mask); + ene_set_reg_addr(dev, reg); + outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO); +} + +/* Clear bits in hardware register */ +static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask) +{ + dbg_regs("reg %04x &= ~%02x ", reg, mask); + ene_set_reg_addr(dev, reg); + outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO); +} + +/* A helper to set/clear a bit in register according to boolean variable */ +static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask, + bool set) +{ + if (set) + ene_set_reg_mask(dev, reg, mask); + else + ene_clear_reg_mask(dev, reg, mask); +} + +/* detect hardware features */ +static int ene_hw_detect(struct ene_device *dev) +{ + u8 chip_major, chip_minor; + u8 hw_revision, old_ver; + u8 fw_reg2, fw_reg1; + + ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD); + chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR); + chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR); + ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD); + + hw_revision = ene_read_reg(dev, ENE_ECHV); + old_ver = ene_read_reg(dev, ENE_HW_VER_OLD); + + dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) + + (ene_read_reg(dev, ENE_PLLFRL) >> 4); + + if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD) + dev->rx_period_adjust = + dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4; + + if (hw_revision == 0xFF) { + pr_warn("device seems to be disabled\n"); + pr_warn("send a mail to lirc-list@lists.sourceforge.net\n"); + pr_warn("please attach output of acpidump and dmidecode\n"); + return -ENODEV; + } + + pr_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n", + chip_major, chip_minor, old_ver, hw_revision); + + pr_notice("PLL freq = %d\n", dev->pll_freq); + + if (chip_major == 0x33) { + pr_warn("chips 0x33xx aren't supported\n"); + return -ENODEV; + } + + if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) { + dev->hw_revision = ENE_HW_C; + pr_notice("KB3926C detected\n"); + } else if (old_ver == 0x24 && hw_revision == 0xC0) { + dev->hw_revision = ENE_HW_B; + pr_notice("KB3926B detected\n"); + } else { + dev->hw_revision = ENE_HW_D; + pr_notice("KB3926D or higher detected\n"); + } + + /* detect features hardware supports */ + if (dev->hw_revision < ENE_HW_C) + return 0; + + fw_reg1 = ene_read_reg(dev, ENE_FW1); + fw_reg2 = ene_read_reg(dev, ENE_FW2); + + pr_notice("Firmware regs: %02x %02x\n", fw_reg1, fw_reg2); + + dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A); + dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING); + dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF); + + if (dev->hw_learning_and_tx_capable) + dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT); + + pr_notice("Hardware features:\n"); + + if (dev->hw_learning_and_tx_capable) { + pr_notice("* Supports transmitting & learning mode\n"); + pr_notice(" This feature is rare and therefore,\n"); + pr_notice(" you are welcome to test it,\n"); + pr_notice(" and/or contact the author via:\n"); + pr_notice(" lirc-list@lists.sourceforge.net\n"); + pr_notice(" or maximlevitsky@gmail.com\n"); + + pr_notice("* Uses GPIO %s for IR raw input\n", + dev->hw_use_gpio_0a ? "40" : "0A"); + + if (dev->hw_fan_input) + pr_notice("* Uses unused fan feedback input as source of demodulated IR data\n"); + } + + if (!dev->hw_fan_input) + pr_notice("* Uses GPIO %s for IR demodulated input\n", + dev->hw_use_gpio_0a ? "0A" : "40"); + + if (dev->hw_extra_buffer) + pr_notice("* Uses new style input buffer\n"); + return 0; +} + +/* Read properities of hw sample buffer */ +static void ene_rx_setup_hw_buffer(struct ene_device *dev) +{ + u16 tmp; + + ene_rx_read_hw_pointer(dev); + dev->r_pointer = dev->w_pointer; + + if (!dev->hw_extra_buffer) { + dev->buffer_len = ENE_FW_PACKET_SIZE * 2; + return; + } + + tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER); + tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8; + dev->extra_buf1_address = tmp; + + dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2); + + tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3); + tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8; + dev->extra_buf2_address = tmp; + + dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5); + + dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8; + + pr_notice("Hardware uses 2 extended buffers:\n"); + pr_notice(" 0x%04x - len : %d\n", + dev->extra_buf1_address, dev->extra_buf1_len); + pr_notice(" 0x%04x - len : %d\n", + dev->extra_buf2_address, dev->extra_buf2_len); + + pr_notice("Total buffer len = %d\n", dev->buffer_len); + + if (dev->buffer_len > 64 || dev->buffer_len < 16) + goto error; + + if (dev->extra_buf1_address > 0xFBFC || + dev->extra_buf1_address < 0xEC00) + goto error; + + if (dev->extra_buf2_address > 0xFBFC || + dev->extra_buf2_address < 0xEC00) + goto error; + + if (dev->r_pointer > dev->buffer_len) + goto error; + + ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); + return; +error: + pr_warn("Error validating extra buffers, device probably won't work\n"); + dev->hw_extra_buffer = false; + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); +} + + +/* Restore the pointers to extra buffers - to make module reload work*/ +static void ene_rx_restore_hw_buffer(struct ene_device *dev) +{ + if (!dev->hw_extra_buffer) + return; + + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0, + dev->extra_buf1_address & 0xFF); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1, + dev->extra_buf1_address >> 8); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len); + + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3, + dev->extra_buf2_address & 0xFF); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4, + dev->extra_buf2_address >> 8); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5, + dev->extra_buf2_len); + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); +} + +/* Read hardware write pointer */ +static void ene_rx_read_hw_pointer(struct ene_device *dev) +{ + if (dev->hw_extra_buffer) + dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER); + else + dev->w_pointer = ene_read_reg(dev, ENE_FW2) + & ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE; + + dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x", + dev->w_pointer, dev->r_pointer); +} + +/* Gets address of next sample from HW ring buffer */ +static int ene_rx_get_sample_reg(struct ene_device *dev) +{ + int r_pointer; + + if (dev->r_pointer == dev->w_pointer) { + dbg_verbose("RB: hit end, try update w_pointer"); + ene_rx_read_hw_pointer(dev); + } + + if (dev->r_pointer == dev->w_pointer) { + dbg_verbose("RB: end of data at %d", dev->r_pointer); + return 0; + } + + dbg_verbose("RB: reading at offset %d", dev->r_pointer); + r_pointer = dev->r_pointer; + + dev->r_pointer++; + if (dev->r_pointer == dev->buffer_len) + dev->r_pointer = 0; + + dbg_verbose("RB: next read will be from offset %d", dev->r_pointer); + + if (r_pointer < 8) { + dbg_verbose("RB: read at main buffer at %d", r_pointer); + return ENE_FW_SAMPLE_BUFFER + r_pointer; + } + + r_pointer -= 8; + + if (r_pointer < dev->extra_buf1_len) { + dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer); + return dev->extra_buf1_address + r_pointer; + } + + r_pointer -= dev->extra_buf1_len; + + if (r_pointer < dev->extra_buf2_len) { + dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer); + return dev->extra_buf2_address + r_pointer; + } + + dbg("attempt to read beyond ring buffer end"); + return 0; +} + +/* Sense current received carrier */ +static void ene_rx_sense_carrier(struct ene_device *dev) +{ + DEFINE_IR_RAW_EVENT(ev); + + int carrier, duty_cycle; + int period = ene_read_reg(dev, ENE_CIRCAR_PRD); + int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD); + + if (!(period & ENE_CIRCAR_PRD_VALID)) + return; + + period &= ~ENE_CIRCAR_PRD_VALID; + + if (!period) + return; + + dbg("RX: hardware carrier period = %02x", period); + dbg("RX: hardware carrier pulse period = %02x", hperiod); + + carrier = 2000000 / period; + duty_cycle = (hperiod * 100) / period; + dbg("RX: sensed carrier = %d Hz, duty cycle %d%%", + carrier, duty_cycle); + if (dev->carrier_detect_enabled) { + ev.carrier_report = true; + ev.carrier = carrier; + ev.duty_cycle = duty_cycle; + ir_raw_event_store(dev->rdev, &ev); + } +} + +/* this enables/disables the CIR RX engine */ +static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable) +{ + ene_set_clear_reg_mask(dev, ENE_CIRCFG, + ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable); +} + +/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/ +static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a) +{ + ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a); +} + +/* + * this enables alternative input via fan tachometer sensor and bypasses + * the hw CIR engine + */ +static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable) +{ + if (!dev->hw_fan_input) + return; + + if (!enable) + ene_write_reg(dev, ENE_FAN_AS_IN1, 0); + else { + ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN); + ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN); + } +} + +/* setup the receiver for RX*/ +static void ene_rx_setup(struct ene_device *dev) +{ + bool learning_mode = dev->learning_mode_enabled || + dev->carrier_detect_enabled; + int sample_period_adjust = 0; + + dbg("RX: setup receiver, learning mode = %d", learning_mode); + + + /* This selects RLC input and clears CFG2 settings */ + ene_write_reg(dev, ENE_CIRCFG2, 0x00); + + /* set sample period*/ + if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD) + sample_period_adjust = + dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2; + + ene_write_reg(dev, ENE_CIRRLC_CFG, + (sample_period + sample_period_adjust) | + ENE_CIRRLC_CFG_OVERFLOW); + /* revB doesn't support inputs */ + if (dev->hw_revision < ENE_HW_C) + goto select_timeout; + + if (learning_mode) { + + WARN_ON(!dev->hw_learning_and_tx_capable); + + /* Enable the opposite of the normal input + That means that if GPIO40 is normally used, use GPIO0A + and vice versa. + This input will carry non demodulated + signal, and we will tell the hw to demodulate it itself */ + ene_rx_select_input(dev, !dev->hw_use_gpio_0a); + dev->rx_fan_input_inuse = false; + + /* Enable carrier demodulation */ + ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD); + + /* Enable carrier detection */ + ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63); + ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT, + dev->carrier_detect_enabled || debug); + } else { + if (dev->hw_fan_input) + dev->rx_fan_input_inuse = true; + else + ene_rx_select_input(dev, dev->hw_use_gpio_0a); + + /* Disable carrier detection & demodulation */ + ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD); + ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT); + } + +select_timeout: + if (dev->rx_fan_input_inuse) { + dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); + + /* Fan input doesn't support timeouts, it just ends the + input with a maximum sample */ + dev->rdev->min_timeout = dev->rdev->max_timeout = + US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + ENE_FW_SAMPLE_PERIOD_FAN); + } else { + dev->rdev->rx_resolution = US_TO_NS(sample_period); + + /* Theoreticly timeout is unlimited, but we cap it + * because it was seen that on one device, it + * would stop sending spaces after around 250 msec. + * Besides, this is close to 2^32 anyway and timeout is u32. + */ + dev->rdev->min_timeout = US_TO_NS(127 * sample_period); + dev->rdev->max_timeout = US_TO_NS(200000); + } + + if (dev->hw_learning_and_tx_capable) + dev->rdev->tx_resolution = US_TO_NS(sample_period); + + if (dev->rdev->timeout > dev->rdev->max_timeout) + dev->rdev->timeout = dev->rdev->max_timeout; + if (dev->rdev->timeout < dev->rdev->min_timeout) + dev->rdev->timeout = dev->rdev->min_timeout; +} + +/* Enable the device for receive */ +static void ene_rx_enable_hw(struct ene_device *dev) +{ + u8 reg_value; + + /* Enable system interrupt */ + if (dev->hw_revision < ENE_HW_C) { + ene_write_reg(dev, ENEB_IRQ, dev->irq << 1); + ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01); + } else { + reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0; + reg_value |= ENE_IRQ_UNK_EN; + reg_value &= ~ENE_IRQ_STATUS; + reg_value |= (dev->irq & ENE_IRQ_MASK); + ene_write_reg(dev, ENE_IRQ, reg_value); + } + + /* Enable inputs */ + ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse); + ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse); + + /* ack any pending irqs - just in case */ + ene_irq_status(dev); + + /* enable firmware bits */ + ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ); + + /* enter idle mode */ + ir_raw_event_set_idle(dev->rdev, true); +} + +/* Enable the device for receive - wrapper to track the state*/ +static void ene_rx_enable(struct ene_device *dev) +{ + ene_rx_enable_hw(dev); + dev->rx_enabled = true; +} + +/* Disable the device receiver */ +static void ene_rx_disable_hw(struct ene_device *dev) +{ + /* disable inputs */ + ene_rx_enable_cir_engine(dev, false); + ene_rx_enable_fan_input(dev, false); + + /* disable hardware IRQ and firmware flag */ + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ); + ir_raw_event_set_idle(dev->rdev, true); +} + +/* Disable the device receiver - wrapper to track the state */ +static void ene_rx_disable(struct ene_device *dev) +{ + ene_rx_disable_hw(dev); + dev->rx_enabled = false; +} + +/* This resets the receiver. Useful to stop stream of spaces at end of + * transmission + */ +static void ene_rx_reset(struct ene_device *dev) +{ + ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN); + ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN); +} + +/* Set up the TX carrier frequency and duty cycle */ +static void ene_tx_set_carrier(struct ene_device *dev) +{ + u8 tx_puls_width; + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + + ene_set_clear_reg_mask(dev, ENE_CIRCFG, + ENE_CIRCFG_TX_CARR, dev->tx_period > 0); + + if (!dev->tx_period) + goto unlock; + + BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0); + + tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle); + + if (!tx_puls_width) + tx_puls_width = 1; + + dbg("TX: pulse distance = %d * 500 ns", dev->tx_period); + dbg("TX: pulse width = %d * 500 ns", tx_puls_width); + + ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL); + ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width); +unlock: + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + +/* Enable/disable transmitters */ +static void ene_tx_set_transmitters(struct ene_device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41, + !!(dev->transmitter_mask & 0x01)); + ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D, + !!(dev->transmitter_mask & 0x02)); + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + +/* prepare transmission */ +static void ene_tx_enable(struct ene_device *dev) +{ + u8 conf1 = ene_read_reg(dev, ENE_CIRCFG); + u8 fwreg2 = ene_read_reg(dev, ENE_FW2); + + dev->saved_conf1 = conf1; + + /* Show information about currently connected transmitter jacks */ + if (fwreg2 & ENE_FW2_EMMITER1_CONN) + dbg("TX: Transmitter #1 is connected"); + + if (fwreg2 & ENE_FW2_EMMITER2_CONN) + dbg("TX: Transmitter #2 is connected"); + + if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN))) + pr_warn("TX: transmitter cable isn't connected!\n"); + + /* disable receive on revc */ + if (dev->hw_revision == ENE_HW_C) + conf1 &= ~ENE_CIRCFG_RX_EN; + + /* Enable TX engine */ + conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ; + ene_write_reg(dev, ENE_CIRCFG, conf1); +} + +/* end transmission */ +static void ene_tx_disable(struct ene_device *dev) +{ + ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1); + dev->tx_buffer = NULL; +} + + +/* TX one sample - must be called with dev->hw_lock*/ +static void ene_tx_sample(struct ene_device *dev) +{ + u8 raw_tx; + u32 sample; + bool pulse = dev->tx_sample_pulse; + + if (!dev->tx_buffer) { + pr_warn("TX: BUG: attempt to transmit NULL buffer\n"); + return; + } + + /* Grab next TX sample */ + if (!dev->tx_sample) { + + if (dev->tx_pos == dev->tx_len) { + if (!dev->tx_done) { + dbg("TX: no more data to send"); + dev->tx_done = true; + goto exit; + } else { + dbg("TX: last sample sent by hardware"); + ene_tx_disable(dev); + complete(&dev->tx_complete); + return; + } + } + + sample = dev->tx_buffer[dev->tx_pos++]; + dev->tx_sample_pulse = !dev->tx_sample_pulse; + + dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period); + + if (!dev->tx_sample) + dev->tx_sample = 1; + } + + raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK); + dev->tx_sample -= raw_tx; + + dbg("TX: sample %8d (%s)", raw_tx * sample_period, + pulse ? "pulse" : "space"); + if (pulse) + raw_tx |= ENE_CIRRLC_OUT_PULSE; + + ene_write_reg(dev, + dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx); + + dev->tx_reg = !dev->tx_reg; +exit: + /* simulate TX done interrupt */ + if (txsim) + mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500); +} + +/* timer to simulate tx done interrupt */ +static void ene_tx_irqsim(struct timer_list *t) +{ + struct ene_device *dev = from_timer(dev, t, tx_sim_timer); + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_tx_sample(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + + +/* read irq status and ack it */ +static int ene_irq_status(struct ene_device *dev) +{ + u8 irq_status; + u8 fw_flags1, fw_flags2; + int retval = 0; + + fw_flags2 = ene_read_reg(dev, ENE_FW2); + + if (dev->hw_revision < ENE_HW_C) { + irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS); + + if (!(irq_status & ENEB_IRQ_STATUS_IR)) + return 0; + + ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR); + return ENE_IRQ_RX; + } + + irq_status = ene_read_reg(dev, ENE_IRQ); + if (!(irq_status & ENE_IRQ_STATUS)) + return 0; + + /* original driver does that twice - a workaround ? */ + ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS); + ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS); + + /* check RX interrupt */ + if (fw_flags2 & ENE_FW2_RXIRQ) { + retval |= ENE_IRQ_RX; + ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ); + } + + /* check TX interrupt */ + fw_flags1 = ene_read_reg(dev, ENE_FW1); + if (fw_flags1 & ENE_FW1_TXIRQ) { + ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ); + retval |= ENE_IRQ_TX; + } + + return retval; +} + +/* interrupt handler */ +static irqreturn_t ene_isr(int irq, void *data) +{ + u16 hw_value, reg; + int hw_sample, irq_status; + bool pulse; + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct ene_device *dev = (struct ene_device *)data; + DEFINE_IR_RAW_EVENT(ev); + + spin_lock_irqsave(&dev->hw_lock, flags); + + dbg_verbose("ISR called"); + ene_rx_read_hw_pointer(dev); + irq_status = ene_irq_status(dev); + + if (!irq_status) + goto unlock; + + retval = IRQ_HANDLED; + + if (irq_status & ENE_IRQ_TX) { + dbg_verbose("TX interrupt"); + if (!dev->hw_learning_and_tx_capable) { + dbg("TX interrupt on unsupported device!"); + goto unlock; + } + ene_tx_sample(dev); + } + + if (!(irq_status & ENE_IRQ_RX)) + goto unlock; + + dbg_verbose("RX interrupt"); + + if (dev->hw_learning_and_tx_capable) + ene_rx_sense_carrier(dev); + + /* On hardware that don't support extra buffer we need to trust + the interrupt and not track the read pointer */ + if (!dev->hw_extra_buffer) + dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0; + + while (1) { + + reg = ene_rx_get_sample_reg(dev); + + dbg_verbose("next sample to read at: %04x", reg); + if (!reg) + break; + + hw_value = ene_read_reg(dev, reg); + + if (dev->rx_fan_input_inuse) { + + int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER; + + /* read high part of the sample */ + hw_value |= ene_read_reg(dev, reg + offset) << 8; + pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS; + + /* clear space bit, and other unused bits */ + hw_value &= ENE_FW_SMPL_BUF_FAN_MSK; + hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN; + + } else { + pulse = !(hw_value & ENE_FW_SAMPLE_SPACE); + hw_value &= ~ENE_FW_SAMPLE_SPACE; + hw_sample = hw_value * sample_period; + + if (dev->rx_period_adjust) { + hw_sample *= 100; + hw_sample /= (100 + dev->rx_period_adjust); + } + } + + if (!dev->hw_extra_buffer && !hw_sample) { + dev->r_pointer = dev->w_pointer; + continue; + } + + dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); + + ev.duration = US_TO_NS(hw_sample); + ev.pulse = pulse; + ir_raw_event_store_with_filter(dev->rdev, &ev); + } + + ir_raw_event_handle(dev->rdev); +unlock: + spin_unlock_irqrestore(&dev->hw_lock, flags); + return retval; +} + +/* Initialize default settings */ +static void ene_setup_default_settings(struct ene_device *dev) +{ + dev->tx_period = 32; + dev->tx_duty_cycle = 50; /*%*/ + dev->transmitter_mask = 0x03; + dev->learning_mode_enabled = learning_mode_force; + + /* Set reasonable default timeout */ + dev->rdev->timeout = US_TO_NS(150000); +} + +/* Upload all hardware settings at once. Used at load and resume time */ +static void ene_setup_hw_settings(struct ene_device *dev) +{ + if (dev->hw_learning_and_tx_capable) { + ene_tx_set_carrier(dev); + ene_tx_set_transmitters(dev); + } + + ene_rx_setup(dev); +} + +/* outside interface: called on first open*/ +static int ene_open(struct rc_dev *rdev) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_rx_enable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} + +/* outside interface: called on device close*/ +static void ene_close(struct rc_dev *rdev) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + spin_lock_irqsave(&dev->hw_lock, flags); + + ene_rx_disable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + +/* outside interface: set transmitter mask */ +static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask) +{ + struct ene_device *dev = rdev->priv; + dbg("TX: attempt to set transmitter mask %02x", tx_mask); + + /* invalid txmask */ + if (!tx_mask || tx_mask & ~0x03) { + dbg("TX: invalid mask"); + /* return count of transmitters */ + return 2; + } + + dev->transmitter_mask = tx_mask; + ene_tx_set_transmitters(dev); + return 0; +} + +/* outside interface : set tx carrier */ +static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier) +{ + struct ene_device *dev = rdev->priv; + u32 period; + + dbg("TX: attempt to set tx carrier to %d kHz", carrier); + if (carrier == 0) + return -EINVAL; + + period = 2000000 / carrier; + if (period && (period > ENE_CIRMOD_PRD_MAX || + period < ENE_CIRMOD_PRD_MIN)) { + + dbg("TX: out of range %d-%d kHz carrier", + 2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX); + return -EINVAL; + } + + dev->tx_period = period; + ene_tx_set_carrier(dev); + return 0; +} + +/*outside interface : set tx duty cycle */ +static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle) +{ + struct ene_device *dev = rdev->priv; + dbg("TX: setting duty cycle to %d%%", duty_cycle); + dev->tx_duty_cycle = duty_cycle; + ene_tx_set_carrier(dev); + return 0; +} + +/* outside interface: enable learning mode */ +static int ene_set_learning_mode(struct rc_dev *rdev, int enable) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + if (enable == dev->learning_mode_enabled) + return 0; + + spin_lock_irqsave(&dev->hw_lock, flags); + dev->learning_mode_enabled = enable; + ene_rx_disable(dev); + ene_rx_setup(dev); + ene_rx_enable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} + +static int ene_set_carrier_report(struct rc_dev *rdev, int enable) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + + if (enable == dev->carrier_detect_enabled) + return 0; + + spin_lock_irqsave(&dev->hw_lock, flags); + dev->carrier_detect_enabled = enable; + ene_rx_disable(dev); + ene_rx_setup(dev); + ene_rx_enable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} + +/* outside interface: enable or disable idle mode */ +static void ene_set_idle(struct rc_dev *rdev, bool idle) +{ + struct ene_device *dev = rdev->priv; + + if (idle) { + ene_rx_reset(dev); + dbg("RX: end of data"); + } +} + +/* outside interface: transmit */ +static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + + dev->tx_buffer = buf; + dev->tx_len = n; + dev->tx_pos = 0; + dev->tx_reg = 0; + dev->tx_done = 0; + dev->tx_sample = 0; + dev->tx_sample_pulse = false; + + dbg("TX: %d samples", dev->tx_len); + + spin_lock_irqsave(&dev->hw_lock, flags); + + ene_tx_enable(dev); + + /* Transmit first two samples */ + ene_tx_sample(dev); + ene_tx_sample(dev); + + spin_unlock_irqrestore(&dev->hw_lock, flags); + + if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) { + dbg("TX: timeout"); + spin_lock_irqsave(&dev->hw_lock, flags); + ene_tx_disable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + } else + dbg("TX: done"); + return n; +} + +/* probe entry */ +static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) +{ + int error = -ENOMEM; + struct rc_dev *rdev; + struct ene_device *dev; + + /* allocate memory */ + dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL); + rdev = rc_allocate_device(RC_DRIVER_IR_RAW); + if (!dev || !rdev) + goto exit_free_dev_rdev; + + /* validate resources */ + error = -ENODEV; + + /* init these to -1, as 0 is valid for both */ + dev->hw_io = -1; + dev->irq = -1; + + if (!pnp_port_valid(pnp_dev, 0) || + pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE) + goto exit_free_dev_rdev; + + if (!pnp_irq_valid(pnp_dev, 0)) + goto exit_free_dev_rdev; + + spin_lock_init(&dev->hw_lock); + + dev->hw_io = pnp_port_start(pnp_dev, 0); + dev->irq = pnp_irq(pnp_dev, 0); + + + pnp_set_drvdata(pnp_dev, dev); + dev->pnp_dev = pnp_dev; + + /* don't allow too short/long sample periods */ + if (sample_period < 5 || sample_period > 0x7F) + sample_period = ENE_DEFAULT_SAMPLE_PERIOD; + + /* detect hardware version and features */ + error = ene_hw_detect(dev); + if (error) + goto exit_free_dev_rdev; + + if (!dev->hw_learning_and_tx_capable && txsim) { + dev->hw_learning_and_tx_capable = true; + timer_setup(&dev->tx_sim_timer, ene_tx_irqsim, 0); + pr_warn("Simulation of TX activated\n"); + } + + if (!dev->hw_learning_and_tx_capable) + learning_mode_force = false; + + rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; + rdev->priv = dev; + rdev->open = ene_open; + rdev->close = ene_close; + rdev->s_idle = ene_set_idle; + rdev->driver_name = ENE_DRIVER_NAME; + rdev->map_name = RC_MAP_RC6_MCE; + rdev->device_name = "ENE eHome Infrared Remote Receiver"; + + if (dev->hw_learning_and_tx_capable) { + rdev->s_learning_mode = ene_set_learning_mode; + init_completion(&dev->tx_complete); + rdev->tx_ir = ene_transmit; + rdev->s_tx_mask = ene_set_tx_mask; + rdev->s_tx_carrier = ene_set_tx_carrier; + rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle; + rdev->s_carrier_report = ene_set_carrier_report; + rdev->device_name = "ENE eHome Infrared Remote Transceiver"; + } + + dev->rdev = rdev; + + ene_rx_setup_hw_buffer(dev); + ene_setup_default_settings(dev); + ene_setup_hw_settings(dev); + + device_set_wakeup_capable(&pnp_dev->dev, true); + device_set_wakeup_enable(&pnp_dev->dev, true); + + error = rc_register_device(rdev); + if (error < 0) + goto exit_free_dev_rdev; + + /* claim the resources */ + error = -EBUSY; + if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) { + goto exit_unregister_device; + } + + if (request_irq(dev->irq, ene_isr, + IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) { + goto exit_release_hw_io; + } + + pr_notice("driver has been successfully loaded\n"); + return 0; + +exit_release_hw_io: + release_region(dev->hw_io, ENE_IO_SIZE); +exit_unregister_device: + rc_unregister_device(rdev); + rdev = NULL; +exit_free_dev_rdev: + rc_free_device(rdev); + kfree(dev); + return error; +} + +/* main unload function */ +static void ene_remove(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_rx_disable(dev); + ene_rx_restore_hw_buffer(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + + free_irq(dev->irq, dev); + release_region(dev->hw_io, ENE_IO_SIZE); + rc_unregister_device(dev->rdev); + kfree(dev); +} + +/* enable wake on IR (wakes on specific button on original remote) */ +static void ene_enable_wake(struct ene_device *dev, bool enable) +{ + dbg("wake on IR %s", enable ? "enabled" : "disabled"); + ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable); +} + +#ifdef CONFIG_PM +static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + bool wake = device_may_wakeup(&dev->pnp_dev->dev); + + if (!wake && dev->rx_enabled) + ene_rx_disable_hw(dev); + + ene_enable_wake(dev, wake); + return 0; +} + +static int ene_resume(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_setup_hw_settings(dev); + + if (dev->rx_enabled) + ene_rx_enable(dev); + + ene_enable_wake(dev, false); + return 0; +} +#endif + +static void ene_shutdown(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_enable_wake(dev, true); +} + +static const struct pnp_device_id ene_ids[] = { + {.id = "ENE0100",}, + {.id = "ENE0200",}, + {.id = "ENE0201",}, + {.id = "ENE0202",}, + {}, +}; + +static struct pnp_driver ene_driver = { + .name = ENE_DRIVER_NAME, + .id_table = ene_ids, + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + + .probe = ene_probe, + .remove = ene_remove, +#ifdef CONFIG_PM + .suspend = ene_suspend, + .resume = ene_resume, +#endif + .shutdown = ene_shutdown, +}; + +module_param(sample_period, int, S_IRUGO); +MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)"); + +module_param(learning_mode_force, bool, S_IRUGO); +MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default"); + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level"); + +module_param(txsim, bool, S_IRUGO); +MODULE_PARM_DESC(txsim, + "Simulate TX features on unsupported hardware (dangerous)"); + +MODULE_DEVICE_TABLE(pnp, ene_ids); +MODULE_DESCRIPTION + ("Infrared input driver for KB3926B/C/D/E/F (aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); + +MODULE_AUTHOR("Maxim Levitsky"); +MODULE_LICENSE("GPL"); + +module_pnp_driver(ene_driver); |