summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/dvb-usb/dib0700_devices.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/dvb-usb/dib0700_devices.c')
-rw-r--r--drivers/media/usb/dvb-usb/dib0700_devices.c5163
1 files changed, 5163 insertions, 0 deletions
diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
new file mode 100644
index 000000000..c8d795028
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -0,0 +1,5163 @@
+/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * Copyright (C) 2005-9 DiBcom, SA et al
+ */
+#include "dib0700.h"
+
+#include "dib3000mc.h"
+#include "dib7000m.h"
+#include "dib7000p.h"
+#include "dib8000.h"
+#include "dib9000.h"
+#include "mt2060.h"
+#include "mt2266.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+#include "xc4000.h"
+#include "s5h1411.h"
+#include "dib0070.h"
+#include "dib0090.h"
+#include "lgdt3305.h"
+#include "mxl5007t.h"
+#include "mn88472.h"
+#include "tda18250.h"
+
+
+static int force_lna_activation;
+module_param(force_lna_activation, int, 0644);
+MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), if applicable for the device (default: 0=automatic/off).");
+
+struct dib0700_adapter_state {
+ int (*set_param_save) (struct dvb_frontend *);
+ const struct firmware *frontend_firmware;
+ struct dib7000p_ops dib7000p_ops;
+ struct dib8000_ops dib8000_ops;
+};
+
+/* Hauppauge Nova-T 500 (aka Bristol)
+ * has a LNA on GPIO0 which is enabled by setting 1 */
+static struct mt2060_config bristol_mt2060_config[2] = {
+ {
+ .i2c_address = 0x60,
+ .clock_out = 3,
+ }, {
+ .i2c_address = 0x61,
+ }
+};
+
+
+static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
+ .band_caps = BAND_VHF | BAND_UHF,
+ .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
+
+ .agc1_max = 42598,
+ .agc1_min = 17694,
+ .agc2_max = 45875,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 59,
+
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 69,
+
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 59,
+
+ .agc2_slope1 = 111,
+ .agc2_slope2 = 28,
+};
+
+static struct dib3000mc_config bristol_dib3000mc_config[2] = {
+ { .agc = &bristol_dib3000p_mt2060_agc_config,
+ .max_time = 0x196,
+ .ln_adc_level = 0x1cc7,
+ .output_mpeg2_in_188_bytes = 1,
+ },
+ { .agc = &bristol_dib3000p_mt2060_agc_config,
+ .max_time = 0x196,
+ .ln_adc_level = 0x1cc7,
+ .output_mpeg2_in_188_bytes = 1,
+ }
+};
+
+static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ if (adap->id == 0) {
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
+
+ if (force_lna_activation)
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+ else
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+
+ if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
+ return -ENODEV;
+ }
+ }
+ st->mt2060_if1[adap->id] = 1220;
+ return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
+ (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
+}
+
+static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
+ { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
+ };
+ if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
+ return 0;
+}
+
+static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
+ struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
+ s8 a;
+ int if1=1220;
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
+ if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
+ }
+ return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
+ &bristol_mt2060_config[adap->id], if1) == NULL ?
+ -ENODEV : 0;
+}
+
+/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
+
+/* MT226x */
+static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
+ {
+ BAND_UHF,
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+ | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+ 1130,
+ 21,
+
+ 0,
+ 118,
+
+ 0,
+ 3530,
+ 1,
+ 0,
+
+ 65535,
+ 33770,
+ 65535,
+ 23592,
+
+ 0,
+ 62,
+ 255,
+ 64,
+ 64,
+ 132,
+ 192,
+ 80,
+ 80,
+
+ 17,
+ 27,
+ 23,
+ 51,
+
+ 1,
+ }, {
+ BAND_VHF | BAND_LBAND,
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+ | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+ 2372,
+ 21,
+
+ 0,
+ 118,
+
+ 0,
+ 3530,
+ 1,
+ 0,
+
+ 65535,
+ 0,
+ 65535,
+ 23592,
+
+ 0,
+ 128,
+ 128,
+ 128,
+ 0,
+ 128,
+ 253,
+ 81,
+ 0,
+
+ 17,
+ 27,
+ 23,
+ 51,
+
+ 1,
+ }
+};
+
+static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
+ .internal = 60000,
+ .sampling = 30000,
+ .pll_prediv = 1,
+ .pll_ratio = 8,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 2,
+ .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+ .ifreq = 0,
+ .timf = 20452225,
+};
+
+static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
+ { .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+
+ .agc_config_count = 2,
+ .agc = stk7700d_7000p_mt2266_agc_config,
+ .bw = &stk7700d_mt2266_pll_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+ },
+ { .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+
+ .agc_config_count = 2,
+ .agc = stk7700d_7000p_mt2266_agc_config,
+ .bw = &stk7700d_mt2266_pll_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+ }
+};
+
+static struct mt2266_config stk7700d_mt2266_config[2] = {
+ { .i2c_address = 0x60
+ },
+ { .i2c_address = 0x60
+ }
+};
+
+static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ if (adap->id == 0) {
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ stk7700d_dib7000p_mt2266_config)
+ != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
+ 0x80 + (adap->id << 1),
+ &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ if (adap->id == 0) {
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
+ stk7700d_dib7000p_mt2266_config)
+ != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
+ 0x80 + (adap->id << 1),
+ &stk7700d_dib7000p_mt2266_config[adap->id]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *tun_i2c;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+ DIBX000_I2C_INTERFACE_TUNER, 1);
+ return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
+ &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
+}
+
+/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
+static struct dibx000_agc_config xc3028_agc_config = {
+ .band_caps = BAND_VHF | BAND_UHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+ * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+ .inv_gain = 712,
+ .time_stabiliz = 21,
+ .alpha_level = 0,
+ .thlock = 118,
+ .wbd_inv = 0,
+ .wbd_ref = 2867,
+ .wbd_sel = 0,
+ .wbd_alpha = 2,
+ .agc1_max = 0,
+ .agc1_min = 0,
+ .agc2_max = 39718,
+ .agc2_min = 9930,
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 0,
+ .agc1_pt3 = 0,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 0,
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 128,
+ .agc2_slope1 = 29,
+ .agc2_slope2 = 29,
+ .alpha_mant = 17,
+ .alpha_exp = 27,
+ .beta_mant = 23,
+ .beta_exp = 51,
+ .perform_agc_softsplit = 1,
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
+static struct dibx000_bandwidth_config xc3028_bw_config = {
+ .internal = 60000,
+ .sampling = 30000,
+ .pll_prediv = 1,
+ .pll_ratio = 8,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 0,
+ .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+ .ifreq = (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+ .timf = 20452225,
+ .xtal_hz = 30000000,
+};
+
+static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .tuner_is_baseband = 1,
+
+ .agc_config_count = 1,
+ .agc = &xc3028_agc_config,
+ .bw = &xc3028_bw_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+};
+
+static int stk7700ph_xc3028_callback(void *ptr, int component,
+ int command, int arg)
+{
+ struct dvb_usb_adapter *adap = ptr;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ /* Send the tuner in then out of reset */
+ state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
+ msleep(10);
+ state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+ break;
+ case XC2028_RESET_CLK:
+ case XC2028_I2C_FLUSH:
+ break;
+ default:
+ err("%s: unknown command %d, arg %d\n", __func__,
+ command, arg);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_DIBCOM52,
+};
+
+static struct xc2028_config stk7700ph_xc3028_config = {
+ .i2c_addr = 0x61,
+ .ctrl = &stk7700ph_xc3028_ctrl,
+};
+
+static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ else
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+ msleep(10);
+
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &stk7700ph_dib7700_xc3028_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
+ &stk7700ph_dib7700_xc3028_config);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *tun_i2c;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+ DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ stk7700ph_xc3028_config.i2c_adap = tun_i2c;
+
+ /* FIXME: generalize & move to common area */
+ adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
+
+ return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
+ == NULL ? -ENODEV : 0;
+}
+
+#define DEFAULT_RC_INTERVAL 50
+
+/*
+ * This function is used only when firmware is < 1.20 version. Newer
+ * firmwares use bulk mode, with functions implemented at dib0700_core,
+ * at dib0700_rc_urb_completion()
+ */
+static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
+{
+ enum rc_proto protocol;
+ u32 scancode;
+ u8 toggle;
+ int i;
+ struct dib0700_state *st = d->priv;
+
+ if (st->fw_version >= 0x10200) {
+ /* For 1.20 firmware , We need to keep the RC polling
+ callback so we can reuse the input device setup in
+ dvb-usb-remote.c. However, the actual work is being done
+ in the bulk URB completion handler. */
+ return 0;
+ }
+
+ st->buf[0] = REQUEST_POLL_RC;
+ st->buf[1] = 0;
+
+ i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4);
+ if (i <= 0) {
+ err("RC Query Failed");
+ return -EIO;
+ }
+
+ /* losing half of KEY_0 events from Philipps rc5 remotes.. */
+ if (st->buf[0] == 0 && st->buf[1] == 0
+ && st->buf[2] == 0 && st->buf[3] == 0)
+ return 0;
+
+ /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]); */
+
+ dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
+
+ switch (d->props.rc.core.protocol) {
+ case RC_PROTO_BIT_NEC:
+ /* NEC protocol sends repeat code as 0 0 0 FF */
+ if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) &&
+ (st->buf[3] == 0xff)) {
+ rc_repeat(d->rc_dev);
+ return 0;
+ }
+
+ protocol = RC_PROTO_NEC;
+ scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]);
+ toggle = 0;
+ break;
+
+ default:
+ /* RC-5 protocol changes toggle bit on new keypress */
+ protocol = RC_PROTO_RC5;
+ scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]);
+ toggle = st->buf[3 - 1];
+ break;
+ }
+
+ rc_keydown(d->rc_dev, protocol, scancode, toggle);
+ return 0;
+}
+
+/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
+static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
+ BAND_UHF | BAND_VHF,
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+ | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+ 712,
+ 41,
+
+ 0,
+ 118,
+
+ 0,
+ 4095,
+ 0,
+ 0,
+
+ 42598,
+ 17694,
+ 45875,
+ 2621,
+ 0,
+ 76,
+ 139,
+ 52,
+ 59,
+ 107,
+ 172,
+ 57,
+ 70,
+
+ 21,
+ 25,
+ 28,
+ 48,
+
+ 1,
+ { 0,
+ 107,
+ 51800,
+ 24700
+ },
+};
+
+static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
+ .band_caps = BAND_UHF | BAND_VHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+ .inv_gain = 712,
+ .time_stabiliz = 41,
+ .alpha_level = 0,
+ .thlock = 118,
+ .wbd_inv = 0,
+ .wbd_ref = 4095,
+ .wbd_sel = 0,
+ .wbd_alpha = 0,
+ .agc1_max = 42598,
+ .agc1_min = 16384,
+ .agc2_max = 42598,
+ .agc2_min = 0,
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 137,
+ .agc1_pt3 = 255,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 255,
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 0,
+ .agc2_slope1 = 0,
+ .agc2_slope2 = 41,
+ .alpha_mant = 15,
+ .alpha_exp = 25,
+ .beta_mant = 28,
+ .beta_exp = 48,
+ .perform_agc_softsplit = 0,
+};
+
+static struct dibx000_bandwidth_config stk7700p_pll_config = {
+ .internal = 60000,
+ .sampling = 30000,
+ .pll_prediv = 1,
+ .pll_ratio = 8,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 0,
+ .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+ .ifreq = 60258167,
+ .timf = 20452225,
+ .xtal_hz = 30000000,
+};
+
+static struct dib7000m_config stk7700p_dib7000m_config = {
+ .dvbt_mode = 1,
+ .output_mpeg2_in_188_bytes = 1,
+ .quartz_direct = 1,
+
+ .agc_config_count = 1,
+ .agc = &stk7700p_7000m_mt2060_agc_config,
+ .bw = &stk7700p_pll_config,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static struct dib7000p_config stk7700p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &stk7700p_7000p_mt2060_agc_config,
+ .bw = &stk7700p_pll_config,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ /* unless there is no real power management in DVB - we leave the device on GPIO6 */
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
+
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ st->mt2060_if1[0] = 1220;
+
+ if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap)) {
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+ st->is_dib7000pc = 1;
+ } else {
+ memset(&state->dib7000p_ops, 0, sizeof(state->dib7000p_ops));
+ adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
+ }
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static struct mt2060_config stk7700p_mt2060_config = {
+ 0x60
+};
+
+static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
+ struct dib0700_state *st = adap->dev->priv;
+ struct i2c_adapter *tun_i2c;
+ struct dib0700_adapter_state *state = adap->priv;
+ s8 a;
+ int if1=1220;
+
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
+ if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
+ }
+ if (st->is_dib7000pc)
+ tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ else
+ tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
+ if1) == NULL ? -ENODEV : 0;
+}
+
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+ .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+ .inv_gain = 600,
+ .time_stabiliz = 10,
+ .alpha_level = 0,
+ .thlock = 118,
+ .wbd_inv = 0,
+ .wbd_ref = 3530,
+ .wbd_sel = 1,
+ .wbd_alpha = 5,
+ .agc1_max = 65535,
+ .agc1_min = 0,
+ .agc2_max = 65535,
+ .agc2_min = 0,
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 40,
+ .agc1_pt3 = 183,
+ .agc1_slope1 = 206,
+ .agc1_slope2 = 255,
+ .agc2_pt1 = 72,
+ .agc2_pt2 = 152,
+ .agc2_slope1 = 88,
+ .agc2_slope2 = 90,
+ .alpha_mant = 17,
+ .alpha_exp = 27,
+ .beta_mant = 23,
+ .beta_exp = 51,
+ .perform_agc_softsplit = 0,
+};
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ deb_info("reset: %d", onoff);
+ return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ deb_info("sleep: %d", onoff);
+ return state->dib7000p_ops.set_gpio(fe, 9, 0, onoff);
+}
+
+static struct dib0070_config dib7070p_dib0070_config[2] = {
+ {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070_tuner_reset,
+ .sleep = dib7070_tuner_sleep,
+ .clock_khz = 12000,
+ .clock_pad_drive = 4,
+ .charge_pump = 2,
+ }, {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070_tuner_reset,
+ .sleep = dib7070_tuner_sleep,
+ .clock_khz = 12000,
+ .charge_pump = 2,
+ }
+};
+
+static struct dib0070_config dib7770p_dib0070_config = {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070_tuner_reset,
+ .sleep = dib7070_tuner_sleep,
+ .clock_khz = 12000,
+ .clock_pad_drive = 0,
+ .flip_chip = 1,
+ .charge_pump = 2,
+};
+
+static int dib7070_set_param_override(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ u16 offset;
+ u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+ switch (band) {
+ case BAND_VHF: offset = 950; break;
+ case BAND_UHF:
+ default: offset = 550; break;
+ }
+ deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+ state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+ return state->set_param_save(fe);
+}
+
+static int dib7770_set_param_override(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ u16 offset;
+ u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+ switch (band) {
+ case BAND_VHF:
+ state->dib7000p_ops.set_gpio(fe, 0, 0, 1);
+ offset = 850;
+ break;
+ case BAND_UHF:
+ default:
+ state->dib7000p_ops.set_gpio(fe, 0, 0, 0);
+ offset = 250;
+ break;
+ }
+ deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+ state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+ return state->set_param_save(fe);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+ DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+ &dib7770p_dib0070_config) == NULL)
+ return -ENODEV;
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+ return 0;
+}
+
+static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ if (adap->id == 0) {
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
+ return -ENODEV;
+ } else {
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
+ return -ENODEV;
+ }
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+ return 0;
+}
+
+static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
+ u16 pid, int onoff)
+{
+ struct dib0700_adapter_state *state = adapter->priv;
+ struct dib0700_state *st = adapter->dev->priv;
+
+ if (st->is_dib7000pc)
+ return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+ return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+ struct dib0700_state *st = adapter->dev->priv;
+ struct dib0700_adapter_state *state = adapter->priv;
+ if (st->is_dib7000pc)
+ return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+ return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+ struct dib0700_adapter_state *state = adapter->priv;
+ return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+ struct dib0700_adapter_state *state = adapter->priv;
+ return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+ .internal = 60000,
+ .sampling = 15000,
+ .pll_prediv = 1,
+ .pll_ratio = 20,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 2,
+ .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+ .ifreq = (0 << 25) | 0,
+ .timf = 20452225,
+ .xtal_hz = 12000000,
+};
+
+static struct dib7000p_config dib7070p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+};
+
+/* STK7070P */
+static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ else
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &dib7070p_dib7000p_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
+ &dib7070p_dib7000p_config);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .enable_current_mirror = 1,
+ .disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ else
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &dib7770p_dib7000p_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
+ &dib7770p_dib7000p_config);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+ {
+ BAND_VHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+ * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+ * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+ * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+ * P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+ (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+ (0 << 0), /* setup*/
+
+ 600, /* inv_gain*/
+ 10, /* time_stabiliz*/
+
+ 0, /* alpha_level*/
+ 118, /* thlock*/
+
+ 0, /* wbd_inv*/
+ 3530, /* wbd_ref*/
+ 1, /* wbd_sel*/
+ 5, /* wbd_alpha*/
+
+ 65535, /* agc1_max*/
+ 0, /* agc1_min*/
+
+ 65535, /* agc2_max*/
+ 0, /* agc2_min*/
+
+ 0, /* agc1_pt1*/
+ 40, /* agc1_pt2*/
+ 183, /* agc1_pt3*/
+ 206, /* agc1_slope1*/
+ 255, /* agc1_slope2*/
+ 72, /* agc2_pt1*/
+ 152, /* agc2_pt2*/
+ 88, /* agc2_slope1*/
+ 90, /* agc2_slope2*/
+
+ 17, /* alpha_mant*/
+ 27, /* alpha_exp*/
+ 23, /* beta_mant*/
+ 51, /* beta_exp*/
+
+ 0, /* perform_agc_softsplit*/
+ }, {
+ BAND_UHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+ * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+ * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+ * P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+ (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+ (0 << 0), /* setup */
+
+ 600, /* inv_gain*/
+ 10, /* time_stabiliz*/
+
+ 0, /* alpha_level*/
+ 118, /* thlock*/
+
+ 0, /* wbd_inv*/
+ 3530, /* wbd_ref*/
+ 1, /* wbd_sel*/
+ 5, /* wbd_alpha*/
+
+ 65535, /* agc1_max*/
+ 0, /* agc1_min*/
+
+ 65535, /* agc2_max*/
+ 0, /* agc2_min*/
+
+ 0, /* agc1_pt1*/
+ 40, /* agc1_pt2*/
+ 183, /* agc1_pt3*/
+ 206, /* agc1_slope1*/
+ 255, /* agc1_slope2*/
+ 72, /* agc2_pt1*/
+ 152, /* agc2_pt2*/
+ 88, /* agc2_slope1*/
+ 90, /* agc2_slope2*/
+
+ 17, /* alpha_mant*/
+ 27, /* alpha_exp*/
+ 23, /* beta_mant*/
+ 51, /* beta_exp*/
+
+ 0, /* perform_agc_softsplit*/
+ }
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+ .internal = 60000,
+ .sampling = 15000,
+ .pll_prediv = 1,
+ .pll_ratio = 20,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 2,
+ .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
+ .ifreq = (0 << 25) | 0, /* ifreq = 0.000000 MHz*/
+ .timf = 18179755,
+ .xtal_hz = 12000000,
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 2,
+ .agc = dib807x_agc_config,
+ .pll = &dib807x_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+
+ .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .div_cfg = 1,
+ .agc_control = &dib0070_ctrl_agc_filter,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .drives = 0x2d98,
+ }, {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 2,
+ .agc = dib807x_agc_config,
+ .pll = &dib807x_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+
+ .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .agc_control = &dib0070_ctrl_agc_filter,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .drives = 0x2d98,
+ }
+};
+
+static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ return state->dib8000_ops.set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ return state->dib8000_ops.set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+ { 240, 7},
+ { 0xffff, 6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+ {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib80xx_tuner_reset,
+ .sleep = dib80xx_tuner_sleep,
+ .clock_khz = 12000,
+ .clock_pad_drive = 4,
+ .vga_filter = 1,
+ .force_crystal_mode = 1,
+ .enable_third_order_filter = 1,
+ .charge_pump = 0,
+ .wbd_gain = dib8070_wbd_gain_cfg,
+ .osc_buffer_state = 0,
+ .freq_offset_khz_uhf = -100,
+ .freq_offset_khz_vhf = -100,
+ }, {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib80xx_tuner_reset,
+ .sleep = dib80xx_tuner_sleep,
+ .clock_khz = 12000,
+ .clock_pad_drive = 2,
+ .vga_filter = 1,
+ .force_crystal_mode = 1,
+ .enable_third_order_filter = 1,
+ .charge_pump = 0,
+ .wbd_gain = dib8070_wbd_gain_cfg,
+ .osc_buffer_state = 0,
+ .freq_offset_khz_uhf = -25,
+ .freq_offset_khz_vhf = -25,
+ }
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ u16 offset = dib0070_wbd_offset(fe);
+ u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
+ switch (band) {
+ case BAND_VHF:
+ offset += 750;
+ break;
+ case BAND_UHF: /* fall-thru wanted */
+ default:
+ offset += 250; break;
+ }
+ deb_info("WBD for DiB8000: %d\n", offset);
+ state->dib8000_ops.set_wbd_ref(fe, offset);
+
+ return state->set_param_save(fe);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe,
+ DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ if (adap->id == 0) {
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+ &dib807x_dib0070_config[0]) == NULL)
+ return -ENODEV;
+ } else {
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+ &dib807x_dib0070_config[1]) == NULL)
+ return -ENODEV;
+ }
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+ return 0;
+}
+
+static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
+ u16 pid, int onoff)
+{
+ struct dib0700_adapter_state *state = adapter->priv;
+
+ return state->dib8000_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
+ int onoff)
+{
+ struct dib0700_adapter_state *state = adapter->priv;
+
+ return state->dib8000_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ 0x80, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
+ &dib807x_dib8000_config[0]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(500);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ /* initialize IC 0 */
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
+ &dib807x_dib8000_config[0]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ /* initialize IC 1 */
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82,
+ &dib807x_dib8000_config[1]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+/* STK8096GP */
+static struct dibx000_agc_config dib8090_agc_config[2] = {
+ {
+ .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+ * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+ | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 787,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 3530,
+ .wbd_sel = 1,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 0,
+
+ .agc2_max = 65535,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 32,
+ .agc1_pt3 = 114,
+ .agc1_slope1 = 143,
+ .agc1_slope2 = 144,
+ .agc2_pt1 = 114,
+ .agc2_pt2 = 227,
+ .agc2_slope1 = 116,
+ .agc2_slope2 = 117,
+
+ .alpha_mant = 28,
+ .alpha_exp = 26,
+ .beta_mant = 31,
+ .beta_exp = 51,
+
+ .perform_agc_softsplit = 0,
+ },
+ {
+ .band_caps = BAND_CBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+ * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+ | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 787,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 3530,
+ .wbd_sel = 1,
+ .wbd_alpha = 5,
+
+ .agc1_max = 0,
+ .agc1_min = 0,
+
+ .agc2_max = 65535,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 32,
+ .agc1_pt3 = 114,
+ .agc1_slope1 = 143,
+ .agc1_slope2 = 144,
+ .agc2_pt1 = 114,
+ .agc2_pt2 = 227,
+ .agc2_slope1 = 116,
+ .agc2_slope2 = 117,
+
+ .alpha_mant = 28,
+ .alpha_exp = 26,
+ .beta_mant = 31,
+ .beta_exp = 51,
+
+ .perform_agc_softsplit = 0,
+ }
+};
+
+static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
+ .internal = 54000,
+ .sampling = 13500,
+
+ .pll_prediv = 1,
+ .pll_ratio = 18,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 2,
+
+ .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0),
+
+ .ifreq = (0 << 25) | 0,
+ .timf = 20199727,
+
+ .xtal_hz = 12000000,
+};
+
+static int dib8090_get_adc_power(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ return state->dib8000_ops.get_adc_power(fe, 1);
+}
+
+static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart)
+{
+ deb_info("AGC control callback: %i\n", restart);
+ dib0090_dcc_freq(fe, restart);
+
+ if (restart == 0) /* before AGC startup */
+ dib0090_set_dc_servo(fe, 1);
+}
+
+static struct dib8000_config dib809x_dib8000_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 2,
+ .agc = dib8090_agc_config,
+ .agc_control = dib8090_agc_control,
+ .pll = &dib8090_pll_config_12mhz,
+ .tuner_is_baseband = 1,
+
+ .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .div_cfg = 0x31,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .drives = 0x2d98,
+ .diversity_delay = 48,
+ .refclksel = 3,
+ }, {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 2,
+ .agc = dib8090_agc_config,
+ .agc_control = dib8090_agc_control,
+ .pll = &dib8090_pll_config_12mhz,
+ .tuner_is_baseband = 1,
+
+ .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .div_cfg = 0x31,
+ .output_mode = OUTMODE_DIVERSITY,
+ .drives = 0x2d08,
+ .diversity_delay = 1,
+ .refclksel = 3,
+ }
+};
+
+static struct dib0090_wbd_slope dib8090_wbd_table[] = {
+ /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
+ { 120, 0, 500, 0, 500, 4 }, /* CBAND */
+ { 170, 0, 450, 0, 450, 4 }, /* CBAND */
+ { 380, 48, 373, 28, 259, 6 }, /* VHF */
+ { 860, 34, 700, 36, 616, 6 }, /* high UHF */
+ { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */
+};
+
+static struct dib0090_config dib809x_dib0090_config = {
+ .io.pll_bypass = 1,
+ .io.pll_range = 1,
+ .io.pll_prediv = 1,
+ .io.pll_loopdiv = 20,
+ .io.adc_clock_ratio = 8,
+ .io.pll_int_loop_filt = 0,
+ .io.clock_khz = 12000,
+ .reset = dib80xx_tuner_reset,
+ .sleep = dib80xx_tuner_sleep,
+ .clkouttobamse = 1,
+ .analog_output = 1,
+ .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 1,
+ .get_adc_power = dib8090_get_adc_power,
+ .freq_offset_khz_uhf = -63,
+ .freq_offset_khz_vhf = -143,
+ .wbd = dib8090_wbd_table,
+ .fref_clock_ratio = 6,
+};
+
+static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe)
+{
+ u8 optimal_pll_ratio = 20;
+ u32 freq_adc, ratio, rest, max = 0;
+ u8 pll_ratio;
+
+ for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) {
+ freq_adc = 12 * pll_ratio * (1 << 8) / 16;
+ ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc;
+ rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc;
+
+ if (rest > freq_adc / 2)
+ rest = freq_adc - rest;
+ deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest);
+ if ((rest > max) && (rest > 717)) {
+ optimal_pll_ratio = pll_ratio;
+ max = rest;
+ }
+ }
+ deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio);
+
+ return optimal_pll_ratio;
+}
+
+static int dib8096_set_param_override(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+ u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
+ u16 target, ltgain, rf_gain_limit;
+ u32 timf;
+ int ret = 0;
+ enum frontend_tune_state tune_state = CT_SHUTDOWN;
+
+ switch (band) {
+ default:
+ deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
+ /* fall through */
+ case BAND_VHF:
+ state->dib8000_ops.set_gpio(fe, 3, 0, 1);
+ break;
+ case BAND_UHF:
+ state->dib8000_ops.set_gpio(fe, 3, 0, 0);
+ break;
+ }
+
+ ret = state->set_param_save(fe);
+ if (ret < 0)
+ return ret;
+
+ if (fe->dtv_property_cache.bandwidth_hz != 6000000) {
+ deb_info("only 6MHz bandwidth is supported\n");
+ return -EINVAL;
+ }
+
+ /* Update PLL if needed ratio */
+ state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
+
+ /* Get optimize PLL ratio to remove spurious */
+ pll_ratio = dib8090_compute_pll_parameters(fe);
+ if (pll_ratio == 17)
+ timf = 21387946;
+ else if (pll_ratio == 18)
+ timf = 20199727;
+ else if (pll_ratio == 19)
+ timf = 19136583;
+ else
+ timf = 18179756;
+
+ /* Update ratio */
+ state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
+
+ state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
+
+ if (band != BAND_CBAND) {
+ /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */
+ target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
+ state->dib8000_ops.set_wbd_ref(fe, target);
+ }
+
+ if (band == BAND_CBAND) {
+ deb_info("tuning in CBAND - soft-AGC startup\n");
+ dib0090_set_tune_state(fe, CT_AGC_START);
+
+ do {
+ ret = dib0090_gain_control(fe);
+ msleep(ret);
+ tune_state = dib0090_get_tune_state(fe);
+ if (tune_state == CT_AGC_STEP_0)
+ state->dib8000_ops.set_gpio(fe, 6, 0, 1);
+ else if (tune_state == CT_AGC_STEP_1) {
+ dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
+ if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */
+ state->dib8000_ops.set_gpio(fe, 6, 0, 0);
+ }
+ } while (tune_state < CT_AGC_STOP);
+
+ deb_info("switching to PWM AGC\n");
+ dib0090_pwm_gain_reset(fe);
+ state->dib8000_ops.pwm_agc_reset(fe);
+ state->dib8000_ops.set_tune_state(fe, CT_DEMOD_START);
+ } else {
+ /* for everything else than CBAND we are using standard AGC */
+ deb_info("not tuning in CBAND - standard AGC startup\n");
+ dib0090_pwm_gain_reset(fe);
+ }
+
+ return 0;
+}
+
+static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ if (adap->id == 0) {
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ return -ENODEV;
+ } else {
+ /* FIXME: check if it is fe_adap[1] */
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ return -ENODEV;
+ }
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+ return 0;
+}
+
+static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk809x_frontend1_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x82, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c;
+ struct dvb_frontend *fe_slave = st->dib8000_ops.get_slave_frontend(adap->fe_adap[0].fe, 1);
+
+ if (fe_slave) {
+ tun_i2c = st->dib8000_ops.get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
+ if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
+ return -ENODEV;
+ fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+ fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
+ }
+ tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ return -ENODEV;
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+
+ return 0;
+}
+
+static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_frontend *fe_slave;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(1000);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+ if (adap->fe_adap[0].fe == NULL)
+ return -ENODEV;
+
+ /* Needed to increment refcount */
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ fe_slave = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
+ state->dib8000_ops.set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
+
+ return fe_slave == NULL ? -ENODEV : 0;
+}
+
+/* TFE8096P */
+static struct dibx000_agc_config dib8096p_agc_config[2] = {
+ {
+ .band_caps = BAND_UHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+ P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+ P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+ P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11)
+ | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+ | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 684,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 1200,
+ .wbd_sel = 3,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 0,
+
+ .agc2_max = 32767,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 0,
+ .agc1_pt3 = 105,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 156,
+ .agc2_pt1 = 105,
+ .agc2_pt2 = 255,
+ .agc2_slope1 = 54,
+ .agc2_slope2 = 0,
+
+ .alpha_mant = 28,
+ .alpha_exp = 26,
+ .beta_mant = 31,
+ .beta_exp = 51,
+
+ .perform_agc_softsplit = 0,
+ } , {
+ .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+ P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+ P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+ P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11)
+ | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+ | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 732,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 1200,
+ .wbd_sel = 3,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 0,
+
+ .agc2_max = 32767,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 0,
+ .agc1_pt3 = 98,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 167,
+ .agc2_pt1 = 98,
+ .agc2_pt2 = 255,
+ .agc2_slope1 = 52,
+ .agc2_slope2 = 0,
+
+ .alpha_mant = 28,
+ .alpha_exp = 26,
+ .beta_mant = 31,
+ .beta_exp = 51,
+
+ .perform_agc_softsplit = 0,
+ }
+};
+
+static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
+ .internal = 108000,
+ .sampling = 13500,
+ .pll_prediv = 1,
+ .pll_ratio = 9,
+ .pll_range = 1,
+ .pll_reset = 0,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 0,
+ .ADClkSrc = 0,
+ .modulo = 2,
+ .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+ .ifreq = (0 << 25) | 0,
+ .timf = 20199729,
+ .xtal_hz = 12000000,
+};
+
+static struct dib8000_config tfe8096p_dib8000_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .update_lna = NULL,
+
+ .agc_config_count = 2,
+ .agc = dib8096p_agc_config,
+ .pll = &dib8096p_clock_config_12_mhz,
+
+ .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+ .agc_control = NULL,
+ .diversity_delay = 48,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .enMpegOutput = 1,
+};
+
+static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
+ { 380, 81, 850, 64, 540, 4},
+ { 860, 51, 866, 21, 375, 4},
+ {1700, 0, 250, 0, 100, 6},
+ {2600, 0, 250, 0, 100, 6},
+ { 0xFFFF, 0, 0, 0, 0, 0},
+};
+
+static struct dib0090_config tfe8096p_dib0090_config = {
+ .io.clock_khz = 12000,
+ .io.pll_bypass = 0,
+ .io.pll_range = 0,
+ .io.pll_prediv = 3,
+ .io.pll_loopdiv = 6,
+ .io.adc_clock_ratio = 0,
+ .io.pll_int_loop_filt = 0,
+
+ .freq_offset_khz_uhf = -143,
+ .freq_offset_khz_vhf = -143,
+
+ .get_adc_power = dib8090_get_adc_power,
+
+ .clkouttobamse = 1,
+ .analog_output = 0,
+
+ .wbd_vhf_offset = 0,
+ .wbd_cband_offset = 0,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 0,
+
+ .fref_clock_ratio = 1,
+
+ .ls_cfg_pad_drv = 0,
+ .data_tx_drv = 0,
+ .low_if = NULL,
+ .in_soc = 1,
+ .force_cband_input = 0,
+};
+
+struct dibx090p_adc {
+ u32 freq; /* RF freq MHz */
+ u32 timf; /* New Timf */
+ u32 pll_loopdiv; /* New prediv */
+ u32 pll_prediv; /* New loopdiv */
+};
+
+struct dibx090p_best_adc {
+ u32 timf;
+ u32 pll_loopdiv;
+ u32 pll_prediv;
+};
+
+static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc)
+{
+ u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
+ u16 xtal = 12000;
+ u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */
+ u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */
+ u32 fmem_max = 140000; /* 140MHz max SDRAM freq */
+ u32 fdem_min = 66000;
+ u32 fcp = 0, fs = 0, fdem = 0, fmem = 0;
+ u32 harmonic_id = 0;
+
+ adc->timf = 0;
+ adc->pll_loopdiv = loopdiv;
+ adc->pll_prediv = prediv;
+
+ deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz);
+
+ /* Find Min and Max prediv */
+ while ((xtal / max_prediv) >= fcp_min)
+ max_prediv++;
+
+ max_prediv--;
+ min_prediv = max_prediv;
+ while ((xtal / min_prediv) <= fcp_max) {
+ min_prediv--;
+ if (min_prediv == 1)
+ break;
+ }
+ deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
+
+ min_prediv = 1;
+
+ for (prediv = min_prediv; prediv < max_prediv; prediv++) {
+ fcp = xtal / prediv;
+ if (fcp > fcp_min && fcp < fcp_max) {
+ for (loopdiv = 1; loopdiv < 64; loopdiv++) {
+ fmem = ((xtal/prediv) * loopdiv);
+ fdem = fmem / 2;
+ fs = fdem / 4;
+
+ /* test min/max system restrictions */
+ if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) {
+ spur = 0;
+ /* test fs harmonics positions */
+ for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) {
+ if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) {
+ spur = 1;
+ break;
+ }
+ }
+
+ if (!spur) {
+ adc->pll_loopdiv = loopdiv;
+ adc->pll_prediv = prediv;
+ adc->timf = (4260880253U / fdem) * (1 << 8);
+ adc->timf += ((4260880253U % fdem) << 8) / fdem;
+
+ deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf);
+ break;
+ }
+ }
+ }
+ }
+ if (!spur)
+ break;
+ }
+
+ if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
+ return -EINVAL;
+ return 0;
+}
+
+static int dib8096p_agc_startup(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+ struct dibx000_bandwidth_config pll;
+ struct dibx090p_best_adc adc;
+ u16 target;
+ int ret;
+
+ ret = state->set_param_save(fe);
+ if (ret < 0)
+ return ret;
+ memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+
+ dib0090_pwm_gain_reset(fe);
+ /* dib0090_get_wbd_target is returning any possible
+ temperature compensated wbd-target */
+ target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
+ state->dib8000_ops.set_wbd_ref(fe, target);
+
+ if (dib8096p_get_best_sampling(fe, &adc) == 0) {
+ pll.pll_ratio = adc.pll_loopdiv;
+ pll.pll_prediv = adc.pll_prediv;
+
+ dib0700_set_i2c_speed(adap->dev, 200);
+ state->dib8000_ops.update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
+ state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
+ dib0700_set_i2c_speed(adap->dev, 1000);
+ }
+ return 0;
+}
+
+static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ u32 fw_version;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+ if (fw_version >= 0x10200)
+ st->fw_use_new_i2c_api = 1;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap,
+ 0x80, &tfe8096p_dib8000_config);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+ tfe8096p_dib0090_config.reset = st->dib8000_ops.tuner_sleep;
+ tfe8096p_dib0090_config.sleep = st->dib8000_ops.tuner_sleep;
+ tfe8096p_dib0090_config.wbd = dib8096p_wbd_table;
+
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+ &tfe8096p_dib0090_config) == NULL)
+ return -ENODEV;
+
+ st->dib8000_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
+ return 0;
+}
+
+/* STK9090M */
+static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+ return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+}
+
+static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+ return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+}
+
+static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+ return dib9000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+ return dib9000_set_gpio(fe, 0, 0, onoff);
+}
+
+static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
+{
+ u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
+ u8 rb[2];
+ struct i2c_msg msg[2] = {
+ {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
+ {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
+ };
+ u8 index_data;
+
+ dibx000_i2c_set_speed(i2c, 250);
+
+ if (i2c_transfer(i2c, msg, 2) != 2)
+ return -EIO;
+
+ switch (rb[0] << 8 | rb[1]) {
+ case 0:
+ deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
+ return -EIO;
+ case 1:
+ deb_info("Found DiB0170 rev2");
+ break;
+ case 2:
+ deb_info("Found DiB0190 rev2");
+ break;
+ default:
+ deb_info("DiB01x0 not found");
+ return -EIO;
+ }
+
+ for (index_data = 0; index_data < len; index_data += 2) {
+ wb[2] = (data[index_data + 1] >> 8) & 0xff;
+ wb[3] = (data[index_data + 1]) & 0xff;
+
+ if (data[index_data] == 0) {
+ wb[0] = (data[index_data] >> 8) & 0xff;
+ wb[1] = (data[index_data]) & 0xff;
+ msg[0].len = 2;
+ if (i2c_transfer(i2c, msg, 2) != 2)
+ return -EIO;
+ wb[2] |= rb[0];
+ wb[3] |= rb[1] & ~(3 << 4);
+ }
+
+ wb[0] = (data[index_data] >> 8)&0xff;
+ wb[1] = (data[index_data])&0xff;
+ msg[0].len = 4;
+ if (i2c_transfer(i2c, &msg[0], 1) != 1)
+ return -EIO;
+ }
+ return 0;
+}
+
+static struct dib9000_config stk9090m_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .vcxo_timer = 279620,
+ .timing_frequency = 20452225,
+ .demod_clock_khz = 60000,
+ .xtal_clock_khz = 30000,
+ .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+ .subband = {
+ 2,
+ {
+ { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
+ { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
+ { 0 },
+ },
+ },
+ .gpio_function = {
+ { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
+ { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
+ },
+};
+
+static struct dib9000_config nim9090md_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .vcxo_timer = 279620,
+ .timing_frequency = 20452225,
+ .demod_clock_khz = 60000,
+ .xtal_clock_khz = 30000,
+ .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+ }, {
+ .output_mpeg2_in_188_bytes = 1,
+ .output_mode = OUTMODE_DIVERSITY,
+ .vcxo_timer = 279620,
+ .timing_frequency = 20452225,
+ .demod_clock_khz = 60000,
+ .xtal_clock_khz = 30000,
+ .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
+ .subband = {
+ 2,
+ {
+ { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
+ { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
+ { 0 },
+ },
+ },
+ .gpio_function = {
+ { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
+ { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
+ },
+ }
+};
+
+static struct dib0090_config dib9090_dib0090_config = {
+ .io.pll_bypass = 0,
+ .io.pll_range = 1,
+ .io.pll_prediv = 1,
+ .io.pll_loopdiv = 8,
+ .io.adc_clock_ratio = 8,
+ .io.pll_int_loop_filt = 0,
+ .io.clock_khz = 30000,
+ .reset = dib90x0_tuner_reset,
+ .sleep = dib90x0_tuner_sleep,
+ .clkouttobamse = 0,
+ .analog_output = 0,
+ .use_pwm_agc = 0,
+ .clkoutdrive = 0,
+ .freq_offset_khz_uhf = 0,
+ .freq_offset_khz_vhf = 0,
+};
+
+static struct dib0090_config nim9090md_dib0090_config[2] = {
+ {
+ .io.pll_bypass = 0,
+ .io.pll_range = 1,
+ .io.pll_prediv = 1,
+ .io.pll_loopdiv = 8,
+ .io.adc_clock_ratio = 8,
+ .io.pll_int_loop_filt = 0,
+ .io.clock_khz = 30000,
+ .reset = dib90x0_tuner_reset,
+ .sleep = dib90x0_tuner_sleep,
+ .clkouttobamse = 1,
+ .analog_output = 0,
+ .use_pwm_agc = 0,
+ .clkoutdrive = 0,
+ .freq_offset_khz_uhf = 0,
+ .freq_offset_khz_vhf = 0,
+ }, {
+ .io.pll_bypass = 0,
+ .io.pll_range = 1,
+ .io.pll_prediv = 1,
+ .io.pll_loopdiv = 8,
+ .io.adc_clock_ratio = 8,
+ .io.pll_int_loop_filt = 0,
+ .io.clock_khz = 30000,
+ .reset = dib90x0_tuner_reset,
+ .sleep = dib90x0_tuner_sleep,
+ .clkouttobamse = 0,
+ .analog_output = 0,
+ .use_pwm_agc = 0,
+ .clkoutdrive = 0,
+ .freq_offset_khz_uhf = 0,
+ .freq_offset_khz_vhf = 0,
+ }
+};
+
+
+static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+ struct dib0700_state *st = adap->dev->priv;
+ u32 fw_version;
+
+ /* Make use of the new i2c functions from FW 1.20 */
+ dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+ if (fw_version >= 0x10200)
+ st->fw_use_new_i2c_api = 1;
+ dib0700_set_i2c_speed(adap->dev, 340);
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
+
+ if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
+ deb_info("%s: Upload failed. (file not found?)\n", __func__);
+ return -ENODEV;
+ } else {
+ deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size);
+ }
+ stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
+ stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
+
+ adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+ struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+ u16 data_dib190[10] = {
+ 1, 0x1374,
+ 2, 0x01a2,
+ 7, 0x0020,
+ 0, 0x00ef,
+ 8, 0x0486,
+ };
+
+ if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+ return -ENODEV;
+ if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
+ return -ENODEV;
+ i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+ if (!i2c)
+ return -ENODEV;
+ if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
+ return -ENODEV;
+ dib0700_set_i2c_speed(adap->dev, 1500);
+ if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
+ return -ENODEV;
+ release_firmware(state->frontend_firmware);
+ return 0;
+}
+
+static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+ struct dib0700_state *st = adap->dev->priv;
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe_slave;
+ u32 fw_version;
+
+ /* Make use of the new i2c functions from FW 1.20 */
+ dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+ if (fw_version >= 0x10200)
+ st->fw_use_new_i2c_api = 1;
+ dib0700_set_i2c_speed(adap->dev, 340);
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
+ deb_info("%s: Upload failed. (file not found?)\n", __func__);
+ return -EIO;
+ } else {
+ deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size);
+ }
+ nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
+ nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
+ nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
+ nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
+
+ dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
+ adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
+
+ if (adap->fe_adap[0].fe == NULL)
+ return -ENODEV;
+
+ i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
+ dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
+
+ fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
+ dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
+
+ return fe_slave == NULL ? -ENODEV : 0;
+}
+
+static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe_slave;
+ u16 data_dib190[10] = {
+ 1, 0x5374,
+ 2, 0x01ae,
+ 7, 0x0020,
+ 0, 0x00ef,
+ 8, 0x0406,
+ };
+ if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+ return -ENODEV;
+ i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+ if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
+ return -ENODEV;
+ i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+ if (!i2c)
+ return -ENODEV;
+ if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
+ return -ENODEV;
+
+ dib0700_set_i2c_speed(adap->dev, 1500);
+ if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
+ return -ENODEV;
+
+ fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
+ if (fe_slave != NULL) {
+ i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
+ dib9000_set_i2c_adapter(fe_slave, i2c);
+
+ i2c = dib9000_get_tuner_interface(fe_slave);
+ if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
+ return -ENODEV;
+ fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+ dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
+ if (dib9000_firmware_post_pll_init(fe_slave) < 0)
+ return -ENODEV;
+ }
+ release_firmware(state->frontend_firmware);
+
+ return 0;
+}
+
+/* NIM7090 */
+static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc)
+{
+ u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
+
+ u16 xtal = 12000;
+ u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */
+ u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
+ u32 fdem_max = 76000;
+ u32 fdem_min = 69500;
+ u32 fcp = 0, fs = 0, fdem = 0;
+ u32 harmonic_id = 0;
+
+ adc->pll_loopdiv = loopdiv;
+ adc->pll_prediv = prediv;
+ adc->timf = 0;
+
+ deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
+
+ /* Find Min and Max prediv */
+ while ((xtal/max_prediv) >= fcp_min)
+ max_prediv++;
+
+ max_prediv--;
+ min_prediv = max_prediv;
+ while ((xtal/min_prediv) <= fcp_max) {
+ min_prediv--;
+ if (min_prediv == 1)
+ break;
+ }
+ deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
+
+ min_prediv = 2;
+
+ for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
+ fcp = xtal / prediv;
+ if (fcp > fcp_min && fcp < fcp_max) {
+ for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
+ fdem = ((xtal/prediv) * loopdiv);
+ fs = fdem / 4;
+ /* test min/max system restrictions */
+
+ if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
+ spur = 0;
+ /* test fs harmonics positions */
+ for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
+ if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
+ spur = 1;
+ break;
+ }
+ }
+
+ if (!spur) {
+ adc->pll_loopdiv = loopdiv;
+ adc->pll_prediv = prediv;
+ adc->timf = 2396745143UL/fdem*(1 << 9);
+ adc->timf += ((2396745143UL%fdem) << 9)/fdem;
+ deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
+ break;
+ }
+ }
+ }
+ }
+ if (!spur)
+ break;
+ }
+
+
+ if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
+ return -EINVAL;
+ else
+ return 0;
+}
+
+static int dib7090_agc_startup(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+ struct dibx000_bandwidth_config pll;
+ u16 target;
+ struct dibx090p_best_adc adc;
+ int ret;
+
+ ret = state->set_param_save(fe);
+ if (ret < 0)
+ return ret;
+
+ memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+ dib0090_pwm_gain_reset(fe);
+ target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
+ state->dib7000p_ops.set_wbd_ref(fe, target);
+
+ if (dib7090p_get_best_sampling(fe, &adc) == 0) {
+ pll.pll_ratio = adc.pll_loopdiv;
+ pll.pll_prediv = adc.pll_prediv;
+
+ state->dib7000p_ops.update_pll(fe, &pll);
+ state->dib7000p_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
+ }
+ return 0;
+}
+
+static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
+{
+ deb_info("AGC restart callback: %d", restart);
+ if (restart == 0) /* before AGC startup */
+ dib0090_set_dc_servo(fe, 1);
+ return 0;
+}
+
+static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ deb_info("update LNA: agc global=%i", agc_global);
+
+ if (agc_global < 25000) {
+ state->dib7000p_ops.set_gpio(fe, 8, 0, 0);
+ state->dib7000p_ops.set_agc1_min(fe, 0);
+ } else {
+ state->dib7000p_ops.set_gpio(fe, 8, 0, 1);
+ state->dib7000p_ops.set_agc1_min(fe, 32768);
+ }
+
+ return 0;
+}
+
+static struct dib0090_wbd_slope dib7090_wbd_table[] = {
+ { 380, 81, 850, 64, 540, 4},
+ { 860, 51, 866, 21, 375, 4},
+ {1700, 0, 250, 0, 100, 6},
+ {2600, 0, 250, 0, 100, 6},
+ { 0xFFFF, 0, 0, 0, 0, 0},
+};
+
+static struct dibx000_agc_config dib7090_agc_config[2] = {
+ {
+ .band_caps = BAND_UHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 687,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 1200,
+ .wbd_sel = 3,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 32768,
+
+ .agc2_max = 65535,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 32,
+ .agc1_pt3 = 114,
+ .agc1_slope1 = 143,
+ .agc1_slope2 = 144,
+ .agc2_pt1 = 114,
+ .agc2_pt2 = 227,
+ .agc2_slope1 = 116,
+ .agc2_slope2 = 117,
+
+ .alpha_mant = 18,
+ .alpha_exp = 0,
+ .beta_mant = 20,
+ .beta_exp = 59,
+
+ .perform_agc_softsplit = 0,
+ } , {
+ .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 732,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 1200,
+ .wbd_sel = 3,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 0,
+
+ .agc2_max = 65535,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 0,
+ .agc1_pt3 = 98,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 167,
+ .agc2_pt1 = 98,
+ .agc2_pt2 = 255,
+ .agc2_slope1 = 104,
+ .agc2_slope2 = 0,
+
+ .alpha_mant = 18,
+ .alpha_exp = 0,
+ .beta_mant = 20,
+ .beta_exp = 59,
+
+ .perform_agc_softsplit = 0,
+ }
+};
+
+static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
+ .internal = 60000,
+ .sampling = 15000,
+ .pll_prediv = 1,
+ .pll_ratio = 5,
+ .pll_range = 0,
+ .pll_reset = 0,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 2,
+ .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),
+ .ifreq = (0 << 25) | 0,
+ .timf = 20452225,
+ .xtal_hz = 15000000,
+};
+
+static struct dib7000p_config nim7090_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+ .update_lna = tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */
+
+ .agc_config_count = 2,
+ .agc = dib7090_agc_config,
+
+ .bw = &dib7090_clock_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .pwm_freq_div = 0,
+
+ .agc_control = dib7090_agc_restart,
+
+ .spur_protect = 0,
+ .disable_sample_and_hold = 0,
+ .enable_current_mirror = 0,
+ .diversity_delay = 0,
+
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .enMpegOutput = 1,
+};
+
+static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global);
+ if (agc_global < 25000) {
+ state->dib7000p_ops.set_gpio(fe, 5, 0, 0);
+ state->dib7000p_ops.set_agc1_min(fe, 0);
+ } else {
+ state->dib7000p_ops.set_gpio(fe, 5, 0, 1);
+ state->dib7000p_ops.set_agc1_min(fe, 32768);
+ }
+
+ return 0;
+}
+
+static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+ .update_lna = tfe7090p_pvr_update_lna,
+
+ .agc_config_count = 2,
+ .agc = dib7090_agc_config,
+
+ .bw = &dib7090_clock_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .pwm_freq_div = 0,
+
+ .agc_control = dib7090_agc_restart,
+
+ .spur_protect = 0,
+ .disable_sample_and_hold = 0,
+ .enable_current_mirror = 0,
+ .diversity_delay = 0,
+
+ .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
+ .default_i2c_addr = 0x90,
+ .enMpegOutput = 1,
+ }, {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+ .update_lna = tfe7090p_pvr_update_lna,
+
+ .agc_config_count = 2,
+ .agc = dib7090_agc_config,
+
+ .bw = &dib7090_clock_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .pwm_freq_div = 0,
+
+ .agc_control = dib7090_agc_restart,
+
+ .spur_protect = 0,
+ .disable_sample_and_hold = 0,
+ .enable_current_mirror = 0,
+ .diversity_delay = 0,
+
+ .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
+ .default_i2c_addr = 0x92,
+ .enMpegOutput = 0,
+ }
+};
+
+static struct dib0090_config nim7090_dib0090_config = {
+ .io.clock_khz = 12000,
+ .io.pll_bypass = 0,
+ .io.pll_range = 0,
+ .io.pll_prediv = 3,
+ .io.pll_loopdiv = 6,
+ .io.adc_clock_ratio = 0,
+ .io.pll_int_loop_filt = 0,
+
+ .freq_offset_khz_uhf = 0,
+ .freq_offset_khz_vhf = 0,
+
+ .clkouttobamse = 1,
+ .analog_output = 0,
+
+ .wbd_vhf_offset = 0,
+ .wbd_cband_offset = 0,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 0,
+
+ .fref_clock_ratio = 0,
+
+ .wbd = dib7090_wbd_table,
+
+ .ls_cfg_pad_drv = 0,
+ .data_tx_drv = 0,
+ .low_if = NULL,
+ .in_soc = 1,
+};
+
+static struct dib7000p_config tfe7790p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 1,
+ .update_lna = tfe7790p_update_lna,
+
+ .agc_config_count = 2,
+ .agc = dib7090_agc_config,
+
+ .bw = &dib7090_clock_config_12_mhz,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .pwm_freq_div = 0,
+
+ .agc_control = dib7090_agc_restart,
+
+ .spur_protect = 0,
+ .disable_sample_and_hold = 0,
+ .enable_current_mirror = 0,
+ .diversity_delay = 0,
+
+ .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
+ .enMpegOutput = 1,
+};
+
+static struct dib0090_config tfe7790p_dib0090_config = {
+ .io.clock_khz = 12000,
+ .io.pll_bypass = 0,
+ .io.pll_range = 0,
+ .io.pll_prediv = 3,
+ .io.pll_loopdiv = 6,
+ .io.adc_clock_ratio = 0,
+ .io.pll_int_loop_filt = 0,
+
+ .freq_offset_khz_uhf = 0,
+ .freq_offset_khz_vhf = 0,
+
+ .clkouttobamse = 1,
+ .analog_output = 0,
+
+ .wbd_vhf_offset = 0,
+ .wbd_cband_offset = 0,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 0,
+
+ .fref_clock_ratio = 0,
+
+ .wbd = dib7090_wbd_table,
+
+ .ls_cfg_pad_drv = 0,
+ .data_tx_drv = 0,
+ .low_if = NULL,
+ .in_soc = 1,
+ .force_cband_input = 0,
+ .is_dib7090e = 0,
+ .force_crystal_mode = 1,
+};
+
+static struct dib0090_config tfe7090pvr_dib0090_config[2] = {
+ {
+ .io.clock_khz = 12000,
+ .io.pll_bypass = 0,
+ .io.pll_range = 0,
+ .io.pll_prediv = 3,
+ .io.pll_loopdiv = 6,
+ .io.adc_clock_ratio = 0,
+ .io.pll_int_loop_filt = 0,
+
+ .freq_offset_khz_uhf = 50,
+ .freq_offset_khz_vhf = 70,
+
+ .clkouttobamse = 1,
+ .analog_output = 0,
+
+ .wbd_vhf_offset = 0,
+ .wbd_cband_offset = 0,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 0,
+
+ .fref_clock_ratio = 0,
+
+ .wbd = dib7090_wbd_table,
+
+ .ls_cfg_pad_drv = 0,
+ .data_tx_drv = 0,
+ .low_if = NULL,
+ .in_soc = 1,
+ }, {
+ .io.clock_khz = 12000,
+ .io.pll_bypass = 0,
+ .io.pll_range = 0,
+ .io.pll_prediv = 3,
+ .io.pll_loopdiv = 6,
+ .io.adc_clock_ratio = 0,
+ .io.pll_int_loop_filt = 0,
+
+ .freq_offset_khz_uhf = -50,
+ .freq_offset_khz_vhf = -70,
+
+ .clkouttobamse = 1,
+ .analog_output = 0,
+
+ .wbd_vhf_offset = 0,
+ .wbd_cband_offset = 0,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 0,
+
+ .fref_clock_ratio = 0,
+
+ .wbd = dib7090_wbd_table,
+
+ .ls_cfg_pad_drv = 0,
+ .data_tx_drv = 0,
+ .low_if = NULL,
+ .in_soc = 1,
+ }
+};
+
+static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+ nim7090_dib0090_config.reset = st->dib7000p_ops.tuner_sleep,
+ nim7090_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep,
+ nim7090_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
+
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
+ return -ENODEV;
+
+ st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ return 0;
+}
+
+static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ /* The TFE7090 requires the dib0700 to not be in master mode */
+ st->disable_streaming_master_mode = 1;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ /* initialize IC 0 */
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ dib0700_set_i2c_speed(adap->dev, 340);
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
+ if (adap->fe_adap[0].fe == NULL)
+ return -ENODEV;
+
+ state->dib7000p_ops.slave_reset(adap->fe_adap[0].fe);
+
+ return 0;
+}
+
+static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *i2c;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
+ err("the master dib7090 has to be initialized first");
+ return -ENODEV; /* the master device has not been initialized */
+ }
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
+ if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
+ dib0700_set_i2c_speed(adap->dev, 200);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+ tfe7090pvr_dib0090_config[0].reset = st->dib7000p_ops.tuner_sleep;
+ tfe7090pvr_dib0090_config[0].sleep = st->dib7000p_ops.tuner_sleep;
+ tfe7090pvr_dib0090_config[0].get_adc_power = st->dib7000p_ops.get_adc_power;
+
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
+ return -ENODEV;
+
+ st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ return 0;
+}
+
+static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+ tfe7090pvr_dib0090_config[1].reset = st->dib7000p_ops.tuner_sleep;
+ tfe7090pvr_dib0090_config[1].sleep = st->dib7000p_ops.tuner_sleep;
+ tfe7090pvr_dib0090_config[1].get_adc_power = st->dib7000p_ops.get_adc_power;
+
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
+ return -ENODEV;
+
+ st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ return 0;
+}
+
+static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ /* The TFE7790P requires the dib0700 to not be in master mode */
+ st->disable_streaming_master_mode = 1;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(20);
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap,
+ 1, 0x10, &tfe7790p_dib7000p_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
+ 0x80, &tfe7790p_dib7000p_config);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c =
+ st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
+
+
+ tfe7790p_dib0090_config.reset = st->dib7000p_ops.tuner_sleep;
+ tfe7790p_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep;
+ tfe7790p_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
+
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+ &tfe7790p_dib0090_config) == NULL)
+ return -ENODEV;
+
+ st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ return 0;
+}
+
+/* STK7070PD */
+static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ }, {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ }
+};
+
+static void stk7070pd_init(struct dvb_usb_device *dev)
+{
+ dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
+}
+
+static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ stk7070pd_init(adap->dev);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
+ stk7070pd_dib7000p_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int novatd_read_status_override(struct dvb_frontend *fe,
+ enum fe_status *stat)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *dev = adap->dev;
+ struct dib0700_state *state = dev->priv;
+ int ret;
+
+ ret = state->read_status(fe, stat);
+
+ if (!ret)
+ dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
+ !!(*stat & FE_HAS_LOCK));
+
+ return ret;
+}
+
+static int novatd_sleep_override(struct dvb_frontend* fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *dev = adap->dev;
+ struct dib0700_state *state = dev->priv;
+
+ /* turn off LED */
+ dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
+
+ return state->sleep(fe);
+}
+
+/*
+ * novatd_frontend_attach - Nova-TD specific attach
+ *
+ * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
+ * information purposes.
+ */
+static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *dev = adap->dev;
+ struct dib0700_state *st = dev->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ if (adap->id == 0) {
+ stk7070pd_init(dev);
+
+ /* turn the power LED on, the other two off (just in case) */
+ dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
+ dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
+ dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
+
+ if (state->dib7000p_ops.i2c_enumeration(&dev->i2c_adap, 2, 18,
+ stk7070pd_dib7000p_config) != 0) {
+ err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&dev->i2c_adap,
+ adap->id == 0 ? 0x80 : 0x82,
+ &stk7070pd_dib7000p_config[adap->id]);
+
+ if (adap->fe_adap[0].fe == NULL)
+ return -ENODEV;
+
+ st->read_status = adap->fe_adap[0].fe->ops.read_status;
+ adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
+ st->sleep = adap->fe_adap[0].fe->ops.sleep;
+ adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
+
+ return 0;
+}
+
+/* S5H1411 */
+static struct s5h1411_config pinnacle_801e_config = {
+ .output_mode = S5H1411_PARALLEL_OUTPUT,
+ .gpio = S5H1411_GPIO_OFF,
+ .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINUOUS_NONINVERTING_CLOCK,
+ .qam_if = S5H1411_IF_44000,
+ .vsb_if = S5H1411_IF_44000,
+ .inversion = S5H1411_INVERSION_OFF,
+ .status_mode = S5H1411_DEMODLOCKING
+};
+
+/* Pinnacle PCTV HD Pro 801e GPIOs map:
+ GPIO0 - currently unknown
+ GPIO1 - xc5000 tuner reset
+ GPIO2 - CX25843 sleep
+ GPIO3 - currently unknown
+ GPIO4 - currently unknown
+ GPIO6 - currently unknown
+ GPIO7 - currently unknown
+ GPIO9 - currently unknown
+ GPIO10 - CX25843 reset
+ */
+static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+
+ /* Make use of the new i2c functions from FW 1.20 */
+ st->fw_use_new_i2c_api = 1;
+
+ /* The s5h1411 requires the dib0700 to not be in master mode */
+ st->disable_streaming_master_mode = 1;
+
+ /* All msleep values taken from Windows USB trace */
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+ dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(400);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(60);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
+ msleep(30);
+
+ /* Put the CX25843 to sleep for now since we're in digital mode */
+ dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+ /* GPIOs are initialized, do the attach */
+ adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
+ &adap->dev->i2c_adap);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int dib0700_xc5000_tuner_callback(void *priv, int component,
+ int command, int arg)
+{
+ struct dvb_usb_adapter *adap = priv;
+
+ if (command == XC5000_TUNER_RESET) {
+ /* Reset the tuner */
+ dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
+ msleep(10);
+ } else {
+ err("xc5000: unknown tuner callback command: %d\n", command);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct xc5000_config s5h1411_xc5000_tunerconfig = {
+ .i2c_address = 0x64,
+ .if_khz = 5380,
+};
+
+static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ /* FIXME: generalize & move to common area */
+ adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
+
+ return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
+ &s5h1411_xc5000_tunerconfig)
+ == NULL ? -ENODEV : 0;
+}
+
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+ int command, int arg)
+{
+ struct dvb_usb_adapter *adap = priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (command == XC4000_TUNER_RESET) {
+ /* Reset the tuner */
+ state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
+ msleep(10);
+ state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+ } else {
+ err("xc4000: unknown tuner callback command: %d\n", command);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+ .band_caps = BAND_UHF | BAND_VHF,
+ .setup = 0x64,
+ .inv_gain = 0x02c8,
+ .time_stabiliz = 0x15,
+ .alpha_level = 0x00,
+ .thlock = 0x76,
+ .wbd_inv = 0x01,
+ .wbd_ref = 0x0b33,
+ .wbd_sel = 0x00,
+ .wbd_alpha = 0x02,
+ .agc1_max = 0x00,
+ .agc1_min = 0x00,
+ .agc2_max = 0x9b26,
+ .agc2_min = 0x26ca,
+ .agc1_pt1 = 0x00,
+ .agc1_pt2 = 0x00,
+ .agc1_pt3 = 0x00,
+ .agc1_slope1 = 0x00,
+ .agc1_slope2 = 0x00,
+ .agc2_pt1 = 0x00,
+ .agc2_pt2 = 0x80,
+ .agc2_slope1 = 0x1d,
+ .agc2_slope2 = 0x1d,
+ .alpha_mant = 0x11,
+ .alpha_exp = 0x1b,
+ .beta_mant = 0x17,
+ .beta_exp = 0x33,
+ .perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+ .internal = 60000,
+ .sampling = 30000,
+ .pll_prediv = 1,
+ .pll_ratio = 8,
+ .pll_range = 3,
+ .pll_reset = 1,
+ .pll_bypass = 0,
+ .enable_refdiv = 0,
+ .bypclk_div = 0,
+ .IO_CLK_en_core = 1,
+ .ADClkSrc = 1,
+ .modulo = 0,
+ .sad_cfg = (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */
+ .ifreq = 39370534,
+ .timf = 20452225,
+ .xtal_hz = 30000000
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &stk7700p_7000p_xc4000_agc_config,
+ .bw = &stk7700p_xc4000_pll_config,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+ dib0700:
+ GPIO2 - CX25843 sleep
+ GPIO3 - CS5340 reset
+ GPIO5 - IRD
+ GPIO6 - Power Supply
+ GPIO8 - LNA (1=off 0=on)
+ GPIO10 - CX25843 reset
+ dib7000:
+ GPIO8 - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
+ return -ENODEV;
+
+ /* Power Supply on */
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ msleep(50);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(100); /* Allow power supply to settle before probing */
+
+ /* cx25843 reset */
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(1); /* cx25843 datasheet say 350us required */
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+
+ /* LNA off for now */
+ dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1);
+
+ /* Put the CX25843 to sleep for now since we're in digital mode */
+ dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+ /* FIXME: not verified yet */
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(500);
+
+ if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+ /* Demodulator not found for some reason? */
+ dvb_detach(state->dib7000p_ops.set_wbd_ref);
+ return -ENODEV;
+ }
+
+ adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x12,
+ &pctv_340e_config);
+ st->is_dib7000pc = 1;
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+ .i2c_address = 0x61,
+ .default_pm = 1,
+ .dvb_amplitude = 0,
+ .set_smoothedcvbs = 0,
+ .if_khz = 5400
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *tun_i2c;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ /* The xc4000 is not on the main i2c bus */
+ tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
+ DIBX000_I2C_INTERFACE_TUNER, 1);
+ if (tun_i2c == NULL) {
+ printk(KERN_ERR "Could not reach tuner i2c bus\n");
+ return 0;
+ }
+
+ /* Setup the reset callback */
+ adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
+
+ return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
+ &dib7000p_xc4000_tunerconfig)
+ == NULL ? -ENODEV : 0;
+}
+
+static struct lgdt3305_config hcw_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_PARALLEL,
+ .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
+ .deny_i2c_rptr = 0,
+ .spectral_inversion = 1,
+ .qam_if_khz = 6000,
+ .vsb_if_khz = 6000,
+ .usref_8vsb = 0x0500,
+};
+
+static struct mxl5007t_config hcw_mxl5007t_config = {
+ .xtal_freq_hz = MxL_XTAL_25_MHZ,
+ .if_freq_hz = MxL_IF_6_MHZ,
+ .invert_if = 1,
+};
+
+/* TIGER-ATSC map:
+ GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
+ GPIO1 - ANT_SEL (H: VPA, L: MCX)
+ GPIO4 - SCL2
+ GPIO6 - EN_TUNER
+ GPIO7 - SDA2
+ GPIO10 - DEM_RST
+
+ MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
+ */
+static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+
+ /* Make use of the new i2c functions from FW 1.20 */
+ st->fw_use_new_i2c_api = 1;
+
+ st->disable_streaming_master_mode = 1;
+
+ /* fe power enable */
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(30);
+
+ /* demod reset */
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(30);
+
+ adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
+ &hcw_lgdt3305_config,
+ &adap->dev->i2c_adap);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
+ &adap->dev->i2c_adap, 0x60,
+ &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
+}
+
+static int xbox_one_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+ struct i2c_client *client_demod, *client_tuner;
+ struct dvb_usb_device *d = adap->dev;
+ struct mn88472_config mn88472_config = { };
+ struct tda18250_config tda18250_config;
+ struct i2c_board_info info;
+
+ st->fw_use_new_i2c_api = 1;
+ st->disable_streaming_master_mode = 1;
+
+ /* fe power enable */
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(30);
+
+ /* demod reset */
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(30);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(30);
+
+ /* attach demod */
+ mn88472_config.fe = &adap->fe_adap[0].fe;
+ mn88472_config.i2c_wr_max = 22;
+ mn88472_config.xtal = 20500000;
+ mn88472_config.ts_mode = PARALLEL_TS_MODE;
+ mn88472_config.ts_clock = FIXED_TS_CLOCK;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "mn88472", I2C_NAME_SIZE);
+ info.addr = 0x18;
+ info.platform_data = &mn88472_config;
+ request_module(info.type);
+ client_demod = i2c_new_device(&d->i2c_adap, &info);
+ if (client_demod == NULL || client_demod->dev.driver == NULL)
+ goto fail_demod_device;
+ if (!try_module_get(client_demod->dev.driver->owner))
+ goto fail_demod_module;
+
+ st->i2c_client_demod = client_demod;
+
+ adap->fe_adap[0].fe = mn88472_config.get_dvb_frontend(client_demod);
+
+ /* attach tuner */
+ memset(&tda18250_config, 0, sizeof(tda18250_config));
+ tda18250_config.if_dvbt_6 = 3950;
+ tda18250_config.if_dvbt_7 = 4450;
+ tda18250_config.if_dvbt_8 = 4950;
+ tda18250_config.if_dvbc_6 = 4950;
+ tda18250_config.if_dvbc_8 = 4950;
+ tda18250_config.if_atsc = 4079;
+ tda18250_config.loopthrough = true;
+ tda18250_config.xtal_freq = TDA18250_XTAL_FREQ_27MHZ;
+ tda18250_config.fe = adap->fe_adap[0].fe;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "tda18250", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &tda18250_config;
+
+ request_module(info.type);
+ client_tuner = i2c_new_device(&adap->dev->i2c_adap, &info);
+ if (client_tuner == NULL || client_tuner->dev.driver == NULL)
+ goto fail_tuner_device;
+ if (!try_module_get(client_tuner->dev.driver->owner))
+ goto fail_tuner_module;
+
+ st->i2c_client_tuner = client_tuner;
+ return 0;
+
+fail_tuner_module:
+ i2c_unregister_device(client_tuner);
+fail_tuner_device:
+ module_put(client_demod->dev.driver->owner);
+fail_demod_module:
+ i2c_unregister_device(client_demod);
+fail_demod_device:
+ return -ENODEV;
+}
+
+
+/* DVB-USB and USB stuff follows */
+struct usb_device_id dib0700_usb_id_table[] = {
+/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
+/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
+ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
+ { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
+ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
+/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
+ { USB_DEVICE(USB_VID_TERRATEC,
+ USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
+/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
+ { USB_DEVICE(USB_VID_PINNACLE,
+ USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
+ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
+/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
+ { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
+ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
+ { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
+ { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
+/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
+/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
+ { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
+ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
+ { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
+ { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
+ { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
+/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
+ { USB_DEVICE(USB_VID_TERRATEC,
+ USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
+ { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
+/* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
+ { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
+ { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
+/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
+ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
+ { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
+/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
+ { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
+ { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
+/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
+ { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
+ { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
+/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
+ { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) },
+/* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) },
+ { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
+/* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790P) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) },
+/* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) },
+ { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E) },
+ { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E_SE) },
+ { USB_DEVICE(USB_VID_PCTV, USB_PID_DIBCOM_STK8096PVR) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096PVR) },
+/* 85 */{ USB_DEVICE(USB_VID_HAMA, USB_PID_HAMA_DVBT_HYBRID) },
+ { USB_DEVICE(USB_VID_MICROSOFT, USB_PID_XBOX_ONE_TUNER) },
+ { 0 } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
+
+#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
+ .usb_ctrl = DEVICE_SPECIFIC, \
+ .firmware = "dvb-usb-dib0700-1.20.fw", \
+ .download_firmware = dib0700_download_firmware, \
+ .no_reconnect = 1, \
+ .size_of_priv = sizeof(struct dib0700_state), \
+ .i2c_algo = &dib0700_i2c_algo, \
+ .identify_state = dib0700_identify_state
+
+#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
+ .streaming_ctrl = dib0700_streaming_ctrl, \
+ .stream = { \
+ .type = USB_BULK, \
+ .count = 4, \
+ .endpoint = ep, \
+ .u = { \
+ .bulk = { \
+ .buffersize = 39480, \
+ } \
+ } \
+ }
+
+#define DIB0700_NUM_FRONTENDS(n) \
+ .num_frontends = n, \
+ .size_of_priv = sizeof(struct dib0700_adapter_state)
+
+struct dvb_usb_device_properties dib0700_devices[] = {
+ {
+ DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk7700p_pid_filter,
+ .pid_filter_ctrl = stk7700p_pid_filter_ctrl,
+ .frontend_attach = stk7700p_frontend_attach,
+ .tuner_attach = stk7700p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 8,
+ .devices = {
+ { "DiBcom STK7700P reference design",
+ { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
+ { NULL },
+ },
+ { "Hauppauge Nova-T Stick",
+ { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
+ { NULL },
+ },
+ { "AVerMedia AVerTV DVB-T Volar",
+ { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
+ { NULL },
+ },
+ { "Compro Videomate U500",
+ { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
+ { NULL },
+ },
+ { "Uniwill STK7700P based (Hama and others)",
+ { &dib0700_usb_id_table[7], NULL },
+ { NULL },
+ },
+ { "Leadtek Winfast DTV Dongle (STK7700P based)",
+ { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
+ { NULL },
+ },
+ { "AVerMedia AVerTV DVB-T Express",
+ { &dib0700_usb_id_table[20] },
+ { NULL },
+ },
+ { "Gigabyte U7000",
+ { &dib0700_usb_id_table[21], NULL },
+ { NULL },
+ }
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .frontend_attach = bristol_frontend_attach,
+ .tuner_attach = bristol_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ }, {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .frontend_attach = bristol_frontend_attach,
+ .tuner_attach = bristol_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ }
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Hauppauge Nova-T 500 Dual DVB-T",
+ { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7700d_frontend_attach,
+ .tuner_attach = stk7700d_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ }, {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7700d_frontend_attach,
+ .tuner_attach = stk7700d_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ }
+ },
+
+ .num_device_descs = 5,
+ .devices = {
+ { "Pinnacle PCTV 2000e",
+ { &dib0700_usb_id_table[11], NULL },
+ { NULL },
+ },
+ { "Terratec Cinergy DT XS Diversity",
+ { &dib0700_usb_id_table[12], NULL },
+ { NULL },
+ },
+ { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
+ { &dib0700_usb_id_table[13], NULL },
+ { NULL },
+ },
+ { "DiBcom STK7700D reference design",
+ { &dib0700_usb_id_table[14], NULL },
+ { NULL },
+ },
+ { "YUAN High-Tech DiBcom STK7700D",
+ { &dib0700_usb_id_table[55], NULL },
+ { NULL },
+ },
+
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7700P2_frontend_attach,
+ .tuner_attach = stk7700d_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 3,
+ .devices = {
+ { "ASUS My Cinema U3000 Mini DVBT Tuner",
+ { &dib0700_usb_id_table[23], NULL },
+ { NULL },
+ },
+ { "Yuan EC372S",
+ { &dib0700_usb_id_table[31], NULL },
+ { NULL },
+ },
+ { "Terratec Cinergy T Express",
+ { &dib0700_usb_id_table[42], NULL },
+ { NULL },
+ }
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7070p_frontend_attach,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 12,
+ .devices = {
+ { "DiBcom STK7070P reference design",
+ { &dib0700_usb_id_table[15], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV DVB-T Flash Stick",
+ { &dib0700_usb_id_table[16], NULL },
+ { NULL },
+ },
+ { "Artec T14BR DVB-T",
+ { &dib0700_usb_id_table[22], NULL },
+ { NULL },
+ },
+ { "ASUS My Cinema U3100 Mini DVBT Tuner",
+ { &dib0700_usb_id_table[24], NULL },
+ { NULL },
+ },
+ { "Hauppauge Nova-T Stick",
+ { &dib0700_usb_id_table[25], NULL },
+ { NULL },
+ },
+ { "Hauppauge Nova-T MyTV.t",
+ { &dib0700_usb_id_table[26], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV 72e",
+ { &dib0700_usb_id_table[29], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV 73e",
+ { &dib0700_usb_id_table[30], NULL },
+ { NULL },
+ },
+ { "Elgato EyeTV DTT",
+ { &dib0700_usb_id_table[49], NULL },
+ { NULL },
+ },
+ { "Yuan PD378S",
+ { &dib0700_usb_id_table[45], NULL },
+ { NULL },
+ },
+ { "Elgato EyeTV Dtt Dlx PD378S",
+ { &dib0700_usb_id_table[50], NULL },
+ { NULL },
+ },
+ { "Elgato EyeTV DTT rev. 2",
+ { &dib0700_usb_id_table[80], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7070p_frontend_attach,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 3,
+ .devices = {
+ { "Pinnacle PCTV 73A",
+ { &dib0700_usb_id_table[56], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV 73e SE",
+ { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV 282e",
+ { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = novatd_frontend_attach,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ }, {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = novatd_frontend_attach,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ }
+ },
+
+ .num_device_descs = 3,
+ .devices = {
+ { "Hauppauge Nova-TD Stick (52009)",
+ { &dib0700_usb_id_table[35], NULL },
+ { NULL },
+ },
+ { "PCTV 2002e",
+ { &dib0700_usb_id_table[81], NULL },
+ { NULL },
+ },
+ { "PCTV 2002e SE",
+ { &dib0700_usb_id_table[82], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7070pd_frontend_attach0,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ }, {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7070pd_frontend_attach1,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ }
+ },
+
+ .num_device_descs = 5,
+ .devices = {
+ { "DiBcom STK7070PD reference design",
+ { &dib0700_usb_id_table[17], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV Dual DVB-T Diversity Stick",
+ { &dib0700_usb_id_table[18], NULL },
+ { NULL },
+ },
+ { "Hauppauge Nova-TD-500 (84xxx)",
+ { &dib0700_usb_id_table[36], NULL },
+ { NULL },
+ },
+ { "Terratec Cinergy DT USB XS Diversity/ T5",
+ { &dib0700_usb_id_table[43],
+ &dib0700_usb_id_table[53], NULL},
+ { NULL },
+ },
+ { "Sony PlayTV",
+ { &dib0700_usb_id_table[44], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7070pd_frontend_attach0,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ }, {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7070pd_frontend_attach1,
+ .tuner_attach = dib7070p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ }
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Elgato EyeTV Diversity",
+ { &dib0700_usb_id_table[68], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7700ph_frontend_attach,
+ .tuner_attach = stk7700ph_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 10,
+ .devices = {
+ { "Terratec Cinergy HT USB XE",
+ { &dib0700_usb_id_table[27], NULL },
+ { NULL },
+ },
+ { "Pinnacle Expresscard 320cx",
+ { &dib0700_usb_id_table[28], NULL },
+ { NULL },
+ },
+ { "Terratec Cinergy HT Express",
+ { &dib0700_usb_id_table[32], NULL },
+ { NULL },
+ },
+ { "Gigabyte U8000-RH",
+ { &dib0700_usb_id_table[37], NULL },
+ { NULL },
+ },
+ { "YUAN High-Tech STK7700PH",
+ { &dib0700_usb_id_table[38], NULL },
+ { NULL },
+ },
+ { "Asus My Cinema-U3000Hybrid",
+ { &dib0700_usb_id_table[39], NULL },
+ { NULL },
+ },
+ { "YUAN High-Tech MC770",
+ { &dib0700_usb_id_table[48], NULL },
+ { NULL },
+ },
+ { "Leadtek WinFast DTV Dongle H",
+ { &dib0700_usb_id_table[51], NULL },
+ { NULL },
+ },
+ { "YUAN High-Tech STK7700D",
+ { &dib0700_usb_id_table[54], NULL },
+ { NULL },
+ },
+ { "Hama DVB=T Hybrid USB Stick",
+ { &dib0700_usb_id_table[85], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .frontend_attach = s5h1411_frontend_attach,
+ .tuner_attach = xc5000_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 2,
+ .devices = {
+ { "Pinnacle PCTV HD Pro USB Stick",
+ { &dib0700_usb_id_table[40], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV HD USB Stick",
+ { &dib0700_usb_id_table[41], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .frontend_attach = lgdt3305_frontend_attach,
+ .tuner_attach = mxl5007t_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 2,
+ .devices = {
+ { "Hauppauge ATSC MiniCard (B200)",
+ { &dib0700_usb_id_table[46], NULL },
+ { NULL },
+ },
+ { "Hauppauge ATSC MiniCard (B210)",
+ { &dib0700_usb_id_table[47], NULL },
+ { NULL },
+ },
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = stk7770p_frontend_attach,
+ .tuner_attach = dib7770p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 4,
+ .devices = {
+ { "DiBcom STK7770P reference design",
+ { &dib0700_usb_id_table[59], NULL },
+ { NULL },
+ },
+ { "Terratec Cinergy T USB XXS (HD)/ T3",
+ { &dib0700_usb_id_table[33],
+ &dib0700_usb_id_table[52],
+ &dib0700_usb_id_table[60], NULL},
+ { NULL },
+ },
+ { "TechniSat AirStar TeleStick 2",
+ { &dib0700_usb_id_table[74], NULL },
+ { NULL },
+ },
+ { "Medion CTX1921 DVB-T USB",
+ { &dib0700_usb_id_table[75], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk807x_frontend_attach,
+ .tuner_attach = dib807x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 3,
+ .devices = {
+ { "DiBcom STK807xP reference design",
+ { &dib0700_usb_id_table[62], NULL },
+ { NULL },
+ },
+ { "Prolink Pixelview SBTVD",
+ { &dib0700_usb_id_table[63], NULL },
+ { NULL },
+ },
+ { "EvolutePC TVWay+",
+ { &dib0700_usb_id_table[64], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk807xpvr_frontend_attach0,
+ .tuner_attach = dib807x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk807xpvr_frontend_attach1,
+ .tuner_attach = dib807x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom STK807xPVR reference design",
+ { &dib0700_usb_id_table[61], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk809x_frontend_attach,
+ .tuner_attach = dib809x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom STK8096GP reference design",
+ { &dib0700_usb_id_table[67], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = dib90x0_pid_filter,
+ .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
+ .frontend_attach = stk9090m_frontend_attach,
+ .tuner_attach = dib9090_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom STK9090M reference design",
+ { &dib0700_usb_id_table[69], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = nim8096md_frontend_attach,
+ .tuner_attach = nim8096md_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom NIM8096MD reference design",
+ { &dib0700_usb_id_table[70], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = dib90x0_pid_filter,
+ .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
+ .frontend_attach = nim9090md_frontend_attach,
+ .tuner_attach = nim9090md_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom NIM9090MD reference design",
+ { &dib0700_usb_id_table[71], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = nim7090_frontend_attach,
+ .tuner_attach = nim7090_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom NIM7090 reference design",
+ { &dib0700_usb_id_table[72], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 2,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = tfe7090pvr_frontend0_attach,
+ .tuner_attach = tfe7090pvr_tuner0_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
+ },
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = tfe7090pvr_frontend1_attach,
+ .tuner_attach = tfe7090pvr_tuner1_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom TFE7090PVR reference design",
+ { &dib0700_usb_id_table[73], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .frontend_attach = pctv340e_frontend_attach,
+ .tuner_attach = xc4000_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
+ },
+ },
+
+ .num_device_descs = 2,
+ .devices = {
+ { "Pinnacle PCTV 340e HD Pro USB Stick",
+ { &dib0700_usb_id_table[76], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV Hybrid Stick Solo",
+ { &dib0700_usb_id_table[77], NULL },
+ { NULL },
+ },
+ },
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .frontend_attach = tfe7790p_frontend_attach,
+ .tuner_attach = tfe7790p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ } },
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom TFE7790P reference design",
+ { &dib0700_usb_id_table[78], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = tfe8096p_frontend_attach,
+ .tuner_attach = tfe8096p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+ } },
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom TFE8096P reference design",
+ { &dib0700_usb_id_table[79], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 2,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk809x_frontend_attach,
+ .tuner_attach = dib809x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ } },
+ .size_of_priv =
+ sizeof(struct dib0700_adapter_state),
+ }, {
+ .num_frontends = 1,
+ .fe = { {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk809x_frontend1_attach,
+ .tuner_attach = dib809x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ } },
+ .size_of_priv =
+ sizeof(struct dib0700_adapter_state),
+ },
+ },
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom STK8096-PVR reference design",
+ { &dib0700_usb_id_table[83],
+ &dib0700_usb_id_table[84], NULL},
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_PROTO_BIT_RC5 |
+ RC_PROTO_BIT_RC6_MCE |
+ RC_PROTO_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ DIB0700_NUM_FRONTENDS(1),
+ .fe = {{
+ .frontend_attach = xbox_one_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x82),
+ } },
+ },
+ },
+ .num_device_descs = 1,
+ .devices = {
+ { "Microsoft Xbox One Digital TV Tuner",
+ { &dib0700_usb_id_table[86], NULL },
+ { NULL },
+ },
+ },
+ },
+};
+
+int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 13:24:33 +0000