diff options
Diffstat (limited to 'drivers/mfd/twl6030-irq.c')
-rw-r--r-- | drivers/mfd/twl6030-irq.c | 471 |
1 files changed, 471 insertions, 0 deletions
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c new file mode 100644 index 000000000..e939431ed --- /dev/null +++ b/drivers/mfd/twl6030-irq.c @@ -0,0 +1,471 @@ +/* + * twl6030-irq.c - TWL6030 irq support + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim <x0khasim@ti.com> + * + * TWL6030 specific code and IRQ handling changes by + * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com> + * Balaji T K <balajitk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kthread.h> +#include <linux/mfd/twl.h> +#include <linux/platform_device.h> +#include <linux/suspend.h> +#include <linux/of.h> +#include <linux/irqdomain.h> +#include <linux/of_device.h> + +#include "twl-core.h" + +/* + * TWL6030 (unlike its predecessors, which had two level interrupt handling) + * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C. + * It exposes status bits saying who has raised an interrupt. There are + * three mask registers that corresponds to these status registers, that + * enables/disables these interrupts. + * + * We set up IRQs starting at a platform-specified base. An interrupt map table, + * specifies mapping between interrupt number and the associated module. + */ +#define TWL6030_NR_IRQS 20 + +static int twl6030_interrupt_mapping[24] = { + PWR_INTR_OFFSET, /* Bit 0 PWRON */ + PWR_INTR_OFFSET, /* Bit 1 RPWRON */ + PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */ + RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ + RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ + HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ + SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ + SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */ + + SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */ + BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ + SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ + MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ + RSV_INTR_OFFSET, /* Bit 12 Reserved */ + MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */ + MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */ + GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ + + USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ + USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ + USBOTG_INTR_OFFSET, /* Bit 18 ID */ + USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */ + CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ + CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */ + CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */ + RSV_INTR_OFFSET, /* Bit 23 Reserved */ +}; + +static int twl6032_interrupt_mapping[24] = { + PWR_INTR_OFFSET, /* Bit 0 PWRON */ + PWR_INTR_OFFSET, /* Bit 1 RPWRON */ + PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */ + RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ + RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ + HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ + SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ + PWR_INTR_OFFSET, /* Bit 7 SPDURATION */ + + PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */ + BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ + SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ + MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ + MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */ + MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */ + GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */ + GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ + + USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ + USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ + USBOTG_INTR_OFFSET, /* Bit 18 ID */ + USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */ + CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ + CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */ + CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */ + RSV_INTR_OFFSET, /* Bit 23 Reserved */ +}; + +/*----------------------------------------------------------------------*/ + +struct twl6030_irq { + unsigned int irq_base; + int twl_irq; + bool irq_wake_enabled; + atomic_t wakeirqs; + struct notifier_block pm_nb; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; + const int *irq_mapping_tbl; +}; + +static struct twl6030_irq *twl6030_irq; + +static int twl6030_irq_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, void *unused) +{ + int chained_wakeups; + struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq, + pm_nb); + + switch (pm_event) { + case PM_SUSPEND_PREPARE: + chained_wakeups = atomic_read(&pdata->wakeirqs); + + if (chained_wakeups && !pdata->irq_wake_enabled) { + if (enable_irq_wake(pdata->twl_irq)) + pr_err("twl6030 IRQ wake enable failed\n"); + else + pdata->irq_wake_enabled = true; + } else if (!chained_wakeups && pdata->irq_wake_enabled) { + disable_irq_wake(pdata->twl_irq); + pdata->irq_wake_enabled = false; + } + + disable_irq(pdata->twl_irq); + break; + + case PM_POST_SUSPEND: + enable_irq(pdata->twl_irq); + break; + + default: + break; + } + + return NOTIFY_DONE; +} + +/* +* Threaded irq handler for the twl6030 interrupt. +* We query the interrupt controller in the twl6030 to determine +* which module is generating the interrupt request and call +* handle_nested_irq for that module. +*/ +static irqreturn_t twl6030_irq_thread(int irq, void *data) +{ + int i, ret; + union { + u8 bytes[4]; + __le32 int_sts; + } sts; + u32 int_sts; /* sts.int_sts converted to CPU endianness */ + struct twl6030_irq *pdata = data; + + /* read INT_STS_A, B and C in one shot using a burst read */ + ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3); + if (ret) { + pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret); + return IRQ_HANDLED; + } + + sts.bytes[3] = 0; /* Only 24 bits are valid*/ + + /* + * Since VBUS status bit is not reliable for VBUS disconnect + * use CHARGER VBUS detection status bit instead. + */ + if (sts.bytes[2] & 0x10) + sts.bytes[2] |= 0x08; + + int_sts = le32_to_cpu(sts.int_sts); + for (i = 0; int_sts; int_sts >>= 1, i++) + if (int_sts & 0x1) { + int module_irq = + irq_find_mapping(pdata->irq_domain, + pdata->irq_mapping_tbl[i]); + if (module_irq) + handle_nested_irq(module_irq); + else + pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n", + i); + pr_debug("twl6030_irq: PIH ISR %u, virq%u\n", + i, module_irq); + } + + /* + * NOTE: + * Simulation confirms that documentation is wrong w.r.t the + * interrupt status clear operation. A single *byte* write to + * any one of STS_A to STS_C register results in all three + * STS registers being reset. Since it does not matter which + * value is written, all three registers are cleared on a + * single byte write, so we just use 0x0 to clear. + */ + ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A); + if (ret) + pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n"); + + return IRQ_HANDLED; +} + +/*----------------------------------------------------------------------*/ + +static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) +{ + struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d); + + if (on) + atomic_inc(&pdata->wakeirqs); + else + atomic_dec(&pdata->wakeirqs); + + return 0; +} + +int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) +{ + int ret; + u8 unmask_value; + + ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value, + REG_INT_STS_A + offset); + unmask_value &= (~(bit_mask)); + ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value, + REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */ + return ret; +} +EXPORT_SYMBOL(twl6030_interrupt_unmask); + +int twl6030_interrupt_mask(u8 bit_mask, u8 offset) +{ + int ret; + u8 mask_value; + + ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value, + REG_INT_STS_A + offset); + mask_value |= (bit_mask); + ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value, + REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */ + return ret; +} +EXPORT_SYMBOL(twl6030_interrupt_mask); + +int twl6030_mmc_card_detect_config(void) +{ + int ret; + u8 reg_val = 0; + + /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */ + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, + REG_INT_MSK_LINE_B); + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, + REG_INT_MSK_STS_B); + /* + * Initially Configuring MMC_CTRL for receiving interrupts & + * Card status on TWL6030 for MMC1 + */ + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL); + if (ret < 0) { + pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret); + return ret; + } + reg_val &= ~VMMC_AUTO_OFF; + reg_val |= SW_FC; + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL); + if (ret < 0) { + pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret); + return ret; + } + + /* Configuring PullUp-PullDown register */ + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, + TWL6030_CFG_INPUT_PUPD3); + if (ret < 0) { + pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n", + ret); + return ret; + } + reg_val &= ~(MMC_PU | MMC_PD); + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, + TWL6030_CFG_INPUT_PUPD3); + if (ret < 0) { + pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n", + ret); + return ret; + } + + return irq_find_mapping(twl6030_irq->irq_domain, + MMCDETECT_INTR_OFFSET); +} +EXPORT_SYMBOL(twl6030_mmc_card_detect_config); + +int twl6030_mmc_card_detect(struct device *dev, int slot) +{ + int ret = -EIO; + u8 read_reg = 0; + struct platform_device *pdev = to_platform_device(dev); + + if (pdev->id) { + /* TWL6030 provide's Card detect support for + * only MMC1 controller. + */ + pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__); + return ret; + } + /* + * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1 + * 0 - Card not present ,1 - Card present + */ + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg, + TWL6030_MMCCTRL); + if (ret >= 0) + ret = read_reg & STS_MMC; + return ret; +} +EXPORT_SYMBOL(twl6030_mmc_card_detect); + +static int twl6030_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + struct twl6030_irq *pdata = d->host_data; + + irq_set_chip_data(virq, pdata); + irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq); + irq_set_nested_thread(virq, true); + irq_set_parent(virq, pdata->twl_irq); + irq_set_noprobe(virq); + + return 0; +} + +static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static const struct irq_domain_ops twl6030_irq_domain_ops = { + .map = twl6030_irq_map, + .unmap = twl6030_irq_unmap, + .xlate = irq_domain_xlate_onetwocell, +}; + +static const struct of_device_id twl6030_of_match[] = { + {.compatible = "ti,twl6030", &twl6030_interrupt_mapping}, + {.compatible = "ti,twl6032", &twl6032_interrupt_mapping}, + { }, +}; + +int twl6030_init_irq(struct device *dev, int irq_num) +{ + struct device_node *node = dev->of_node; + int nr_irqs; + int status; + u8 mask[3]; + const struct of_device_id *of_id; + + of_id = of_match_device(twl6030_of_match, dev); + if (!of_id || !of_id->data) { + dev_err(dev, "Unknown TWL device model\n"); + return -EINVAL; + } + + nr_irqs = TWL6030_NR_IRQS; + + twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL); + if (!twl6030_irq) + return -ENOMEM; + + mask[0] = 0xFF; + mask[1] = 0xFF; + mask[2] = 0xFF; + + /* mask all int lines */ + status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); + /* mask all int sts */ + status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); + /* clear INT_STS_A,B,C */ + status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); + + if (status < 0) { + dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status); + return status; + } + + /* + * install an irq handler for each of the modules; + * clone dummy irq_chip since PIH can't *do* anything + */ + twl6030_irq->irq_chip = dummy_irq_chip; + twl6030_irq->irq_chip.name = "twl6030"; + twl6030_irq->irq_chip.irq_set_type = NULL; + twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake; + + twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier; + atomic_set(&twl6030_irq->wakeirqs, 0); + twl6030_irq->irq_mapping_tbl = of_id->data; + + twl6030_irq->irq_domain = + irq_domain_add_linear(node, nr_irqs, + &twl6030_irq_domain_ops, twl6030_irq); + if (!twl6030_irq->irq_domain) { + dev_err(dev, "Can't add irq_domain\n"); + return -ENOMEM; + } + + dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num); + + /* install an irq handler to demultiplex the TWL6030 interrupt */ + status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread, + IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq); + if (status < 0) { + dev_err(dev, "could not claim irq %d: %d\n", irq_num, status); + goto fail_irq; + } + + twl6030_irq->twl_irq = irq_num; + register_pm_notifier(&twl6030_irq->pm_nb); + return 0; + +fail_irq: + irq_domain_remove(twl6030_irq->irq_domain); + return status; +} + +int twl6030_exit_irq(void) +{ + if (twl6030_irq && twl6030_irq->twl_irq) { + unregister_pm_notifier(&twl6030_irq->pm_nb); + free_irq(twl6030_irq->twl_irq, NULL); + /* + * TODO: IRQ domain and allocated nested IRQ descriptors + * should be freed somehow here. Now It can't be done, because + * child devices will not be deleted during removing of + * TWL Core driver and they will still contain allocated + * virt IRQs in their Resources tables. + * The same prevents us from using devm_request_threaded_irq() + * in this module. + */ + } + return 0; +} + |