3 files changed, 11 insertions, 3 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index e340791a8..6937f39fe 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1461,7 +1461,13 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		mmc_power_cycle(host, ocr);
 	} else {
 		bit = fls(ocr) - 1;
-		ocr &= 3 << bit;
+		/*
+		 * The bit variable represents the highest voltage bit set in
+		 * the OCR register.
+		 * To keep a range of 2 values (e.g. 3.2V/3.3V and 3.3V/3.4V),
+		 * we must shift the mask '3' with (bit - 1).
+		 */
+		ocr &= 3 << (bit - 1);
 		if (bit != host->ios.vdd)
 			dev_warn(mmc_dev(host), "exceeding card's volts\n");
 	}
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c179c4984..fc775c440 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -787,7 +787,8 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+	if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) &&
+	    rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index b6d8203e4..8aebdc4ff 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -264,7 +264,8 @@ static void sdio_release_func(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
 
-	sdio_free_func_cis(func);
+	if (!(func->card->quirks & MMC_QUIRK_NONSTD_SDIO))
+		sdio_free_func_cis(func);
 
 	kfree(func->info);
 	kfree(func->tmpbuf);