diff options
Diffstat (limited to 'drivers/mmc/host/pxamci.c')
| -rw-r--r-- | drivers/mmc/host/pxamci.c | 839 |
1 files changed, 839 insertions, 0 deletions
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c new file mode 100644 index 000000000..00b5465df --- /dev/null +++ b/drivers/mmc/host/pxamci.c @@ -0,0 +1,839 @@ +/* + * linux/drivers/mmc/host/pxa.c - PXA MMCI driver + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This hardware is really sick: + * - No way to clear interrupts. + * - Have to turn off the clock whenever we touch the device. + * - Doesn't tell you how many data blocks were transferred. + * Yuck! + * + * 1 and 3 byte data transfers not supported + * max block length up to 1023 + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/io.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio.h> +#include <linux/gfp.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> + +#include <asm/sizes.h> + +#include <mach/hardware.h> +#include <linux/platform_data/mmc-pxamci.h> + +#include "pxamci.h" + +#define DRIVER_NAME "pxa2xx-mci" + +#define NR_SG 1 +#define CLKRT_OFF (~0) + +#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \ + || cpu_is_pxa935()) + +struct pxamci_host { + struct mmc_host *mmc; + spinlock_t lock; + struct resource *res; + void __iomem *base; + struct clk *clk; + unsigned long clkrate; + unsigned int clkrt; + unsigned int cmdat; + unsigned int imask; + unsigned int power_mode; + unsigned long detect_delay_ms; + struct pxamci_platform_data *pdata; + + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + struct dma_chan *dma_chan_rx; + struct dma_chan *dma_chan_tx; + dma_cookie_t dma_cookie; + unsigned int dma_len; + unsigned int dma_dir; +}; + +static int pxamci_init_ocr(struct pxamci_host *host) +{ + struct mmc_host *mmc = host->mmc; + int ret; + + ret = mmc_regulator_get_supply(mmc); + if (ret < 0) + return ret; + + if (IS_ERR(mmc->supply.vmmc)) { + /* fall-back to platform data */ + mmc->ocr_avail = host->pdata ? + host->pdata->ocr_mask : + MMC_VDD_32_33 | MMC_VDD_33_34; + } + + return 0; +} + +static inline int pxamci_set_power(struct pxamci_host *host, + unsigned char power_mode, + unsigned int vdd) +{ + struct mmc_host *mmc = host->mmc; + struct regulator *supply = mmc->supply.vmmc; + int on; + + if (!IS_ERR(supply)) + return mmc_regulator_set_ocr(mmc, supply, vdd); + + if (host->pdata && + gpio_is_valid(host->pdata->gpio_power)) { + on = ((1 << vdd) & host->pdata->ocr_mask); + gpio_set_value(host->pdata->gpio_power, + !!on ^ host->pdata->gpio_power_invert); + } + + if (host->pdata && host->pdata->setpower) + return host->pdata->setpower(mmc_dev(host->mmc), vdd); + + return 0; +} + +static void pxamci_stop_clock(struct pxamci_host *host) +{ + if (readl(host->base + MMC_STAT) & STAT_CLK_EN) { + unsigned long timeout = 10000; + unsigned int v; + + writel(STOP_CLOCK, host->base + MMC_STRPCL); + + do { + v = readl(host->base + MMC_STAT); + if (!(v & STAT_CLK_EN)) + break; + udelay(1); + } while (timeout--); + + if (v & STAT_CLK_EN) + dev_err(mmc_dev(host->mmc), "unable to stop clock\n"); + } +} + +static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->imask &= ~mask; + writel(host->imask, host->base + MMC_I_MASK); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->imask |= mask; + writel(host->imask, host->base + MMC_I_MASK); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void pxamci_dma_irq(void *param); + +static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) +{ + struct dma_async_tx_descriptor *tx; + enum dma_transfer_direction direction; + struct dma_slave_config config; + struct dma_chan *chan; + unsigned int nob = data->blocks; + unsigned long long clks; + unsigned int timeout; + int ret; + + host->data = data; + + writel(nob, host->base + MMC_NOB); + writel(data->blksz, host->base + MMC_BLKLEN); + + clks = (unsigned long long)data->timeout_ns * host->clkrate; + do_div(clks, 1000000000UL); + timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt); + writel((timeout + 255) / 256, host->base + MMC_RDTO); + + memset(&config, 0, sizeof(config)); + config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + config.src_addr = host->res->start + MMC_RXFIFO; + config.dst_addr = host->res->start + MMC_TXFIFO; + config.src_maxburst = 32; + config.dst_maxburst = 32; + + if (data->flags & MMC_DATA_READ) { + host->dma_dir = DMA_FROM_DEVICE; + direction = DMA_DEV_TO_MEM; + chan = host->dma_chan_rx; + } else { + host->dma_dir = DMA_TO_DEVICE; + direction = DMA_MEM_TO_DEV; + chan = host->dma_chan_tx; + } + + config.direction = direction; + + ret = dmaengine_slave_config(chan, &config); + if (ret < 0) { + dev_err(mmc_dev(host->mmc), "dma slave config failed\n"); + return; + } + + host->dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len, + host->dma_dir); + + tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, + DMA_PREP_INTERRUPT); + if (!tx) { + dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n"); + return; + } + + if (!(data->flags & MMC_DATA_READ)) { + tx->callback = pxamci_dma_irq; + tx->callback_param = host; + } + + host->dma_cookie = dmaengine_submit(tx); + + /* + * workaround for erratum #91: + * only start DMA now if we are doing a read, + * otherwise we wait until CMD/RESP has finished + * before starting DMA. + */ + if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ) + dma_async_issue_pending(chan); +} + +static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat) +{ + WARN_ON(host->cmd != NULL); + host->cmd = cmd; + + if (cmd->flags & MMC_RSP_BUSY) + cmdat |= CMDAT_BUSY; + +#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE)) + switch (RSP_TYPE(mmc_resp_type(cmd))) { + case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */ + cmdat |= CMDAT_RESP_SHORT; + break; + case RSP_TYPE(MMC_RSP_R3): + cmdat |= CMDAT_RESP_R3; + break; + case RSP_TYPE(MMC_RSP_R2): + cmdat |= CMDAT_RESP_R2; + break; + default: + break; + } + + writel(cmd->opcode, host->base + MMC_CMD); + writel(cmd->arg >> 16, host->base + MMC_ARGH); + writel(cmd->arg & 0xffff, host->base + MMC_ARGL); + writel(cmdat, host->base + MMC_CMDAT); + writel(host->clkrt, host->base + MMC_CLKRT); + + writel(START_CLOCK, host->base + MMC_STRPCL); + + pxamci_enable_irq(host, END_CMD_RES); +} + +static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq) +{ + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + mmc_request_done(host->mmc, mrq); +} + +static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i; + u32 v; + + if (!cmd) + return 0; + + host->cmd = NULL; + + /* + * Did I mention this is Sick. We always need to + * discard the upper 8 bits of the first 16-bit word. + */ + v = readl(host->base + MMC_RES) & 0xffff; + for (i = 0; i < 4; i++) { + u32 w1 = readl(host->base + MMC_RES) & 0xffff; + u32 w2 = readl(host->base + MMC_RES) & 0xffff; + cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8; + v = w2; + } + + if (stat & STAT_TIME_OUT_RESPONSE) { + cmd->error = -ETIMEDOUT; + } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) { + /* + * workaround for erratum #42: + * Intel PXA27x Family Processor Specification Update Rev 001 + * A bogus CRC error can appear if the msb of a 136 bit + * response is a one. + */ + if (cpu_is_pxa27x() && + (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000)) + pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode); + else + cmd->error = -EILSEQ; + } + + pxamci_disable_irq(host, END_CMD_RES); + if (host->data && !cmd->error) { + pxamci_enable_irq(host, DATA_TRAN_DONE); + /* + * workaround for erratum #91, if doing write + * enable DMA late + */ + if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE) + dma_async_issue_pending(host->dma_chan_tx); + } else { + pxamci_finish_request(host, host->mrq); + } + + return 1; +} + +static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + struct dma_chan *chan; + + if (!data) + return 0; + + if (data->flags & MMC_DATA_READ) + chan = host->dma_chan_rx; + else + chan = host->dma_chan_tx; + dma_unmap_sg(chan->device->dev, + data->sg, data->sg_len, host->dma_dir); + + if (stat & STAT_READ_TIME_OUT) + data->error = -ETIMEDOUT; + else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR)) + data->error = -EILSEQ; + + /* + * There appears to be a hardware design bug here. There seems to + * be no way to find out how much data was transferred to the card. + * This means that if there was an error on any block, we mark all + * data blocks as being in error. + */ + if (!data->error) + data->bytes_xfered = data->blocks * data->blksz; + else + data->bytes_xfered = 0; + + pxamci_disable_irq(host, DATA_TRAN_DONE); + + host->data = NULL; + if (host->mrq->stop) { + pxamci_stop_clock(host); + pxamci_start_cmd(host, host->mrq->stop, host->cmdat); + } else { + pxamci_finish_request(host, host->mrq); + } + + return 1; +} + +static irqreturn_t pxamci_irq(int irq, void *devid) +{ + struct pxamci_host *host = devid; + unsigned int ireg; + int handled = 0; + + ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK); + + if (ireg) { + unsigned stat = readl(host->base + MMC_STAT); + + pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat); + + if (ireg & END_CMD_RES) + handled |= pxamci_cmd_done(host, stat); + if (ireg & DATA_TRAN_DONE) + handled |= pxamci_data_done(host, stat); + if (ireg & SDIO_INT) { + mmc_signal_sdio_irq(host->mmc); + handled = 1; + } + } + + return IRQ_RETVAL(handled); +} + +static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct pxamci_host *host = mmc_priv(mmc); + unsigned int cmdat; + + WARN_ON(host->mrq != NULL); + + host->mrq = mrq; + + pxamci_stop_clock(host); + + cmdat = host->cmdat; + host->cmdat &= ~CMDAT_INIT; + + if (mrq->data) { + pxamci_setup_data(host, mrq->data); + + cmdat &= ~CMDAT_BUSY; + cmdat |= CMDAT_DATAEN | CMDAT_DMAEN; + if (mrq->data->flags & MMC_DATA_WRITE) + cmdat |= CMDAT_WRITE; + } + + pxamci_start_cmd(host, mrq->cmd, cmdat); +} + +static int pxamci_get_ro(struct mmc_host *mmc) +{ + struct pxamci_host *host = mmc_priv(mmc); + + if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) + return mmc_gpio_get_ro(mmc); + if (host->pdata && host->pdata->get_ro) + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; +} + +static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct pxamci_host *host = mmc_priv(mmc); + + if (ios->clock) { + unsigned long rate = host->clkrate; + unsigned int clk = rate / ios->clock; + + if (host->clkrt == CLKRT_OFF) + clk_prepare_enable(host->clk); + + if (ios->clock == 26000000) { + /* to support 26MHz */ + host->clkrt = 7; + } else { + /* to handle (19.5MHz, 26MHz) */ + if (!clk) + clk = 1; + + /* + * clk might result in a lower divisor than we + * desire. check for that condition and adjust + * as appropriate. + */ + if (rate / clk > ios->clock) + clk <<= 1; + host->clkrt = fls(clk) - 1; + } + + /* + * we write clkrt on the next command + */ + } else { + pxamci_stop_clock(host); + if (host->clkrt != CLKRT_OFF) { + host->clkrt = CLKRT_OFF; + clk_disable_unprepare(host->clk); + } + } + + if (host->power_mode != ios->power_mode) { + int ret; + + host->power_mode = ios->power_mode; + + ret = pxamci_set_power(host, ios->power_mode, ios->vdd); + if (ret) { + dev_err(mmc_dev(mmc), "unable to set power\n"); + /* + * The .set_ios() function in the mmc_host_ops + * struct return void, and failing to set the + * power should be rare so we print an error and + * return here. + */ + return; + } + + if (ios->power_mode == MMC_POWER_ON) + host->cmdat |= CMDAT_INIT; + } + + if (ios->bus_width == MMC_BUS_WIDTH_4) + host->cmdat |= CMDAT_SD_4DAT; + else + host->cmdat &= ~CMDAT_SD_4DAT; + + dev_dbg(mmc_dev(mmc), "PXAMCI: clkrt = %x cmdat = %x\n", + host->clkrt, host->cmdat); +} + +static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable) +{ + struct pxamci_host *pxa_host = mmc_priv(host); + + if (enable) + pxamci_enable_irq(pxa_host, SDIO_INT); + else + pxamci_disable_irq(pxa_host, SDIO_INT); +} + +static const struct mmc_host_ops pxamci_ops = { + .request = pxamci_request, + .get_cd = mmc_gpio_get_cd, + .get_ro = pxamci_get_ro, + .set_ios = pxamci_set_ios, + .enable_sdio_irq = pxamci_enable_sdio_irq, +}; + +static void pxamci_dma_irq(void *param) +{ + struct pxamci_host *host = param; + struct dma_tx_state state; + enum dma_status status; + struct dma_chan *chan; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (!host->data) + goto out_unlock; + + if (host->data->flags & MMC_DATA_READ) + chan = host->dma_chan_rx; + else + chan = host->dma_chan_tx; + + status = dmaengine_tx_status(chan, host->dma_cookie, &state); + + if (likely(status == DMA_COMPLETE)) { + writel(BUF_PART_FULL, host->base + MMC_PRTBUF); + } else { + pr_err("%s: DMA error on %s channel\n", mmc_hostname(host->mmc), + host->data->flags & MMC_DATA_READ ? "rx" : "tx"); + host->data->error = -EIO; + pxamci_data_done(host, 0); + } + +out_unlock: + spin_unlock_irqrestore(&host->lock, flags); +} + +static irqreturn_t pxamci_detect_irq(int irq, void *devid) +{ + struct pxamci_host *host = mmc_priv(devid); + + mmc_detect_change(devid, msecs_to_jiffies(host->detect_delay_ms)); + return IRQ_HANDLED; +} + +#ifdef CONFIG_OF +static const struct of_device_id pxa_mmc_dt_ids[] = { + { .compatible = "marvell,pxa-mmc" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids); + +static int pxamci_of_init(struct platform_device *pdev, + struct mmc_host *mmc) +{ + struct device_node *np = pdev->dev.of_node; + struct pxamci_host *host = mmc_priv(mmc); + u32 tmp; + int ret; + + if (!np) + return 0; + + /* pxa-mmc specific */ + if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0) + host->detect_delay_ms = tmp; + + ret = mmc_of_parse(mmc); + if (ret < 0) + return ret; + + return 0; +} +#else +static int pxamci_of_init(struct platform_device *pdev, + struct mmc_host *mmc) +{ + return 0; +} +#endif + +static int pxamci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct pxamci_host *host = NULL; + struct device *dev = &pdev->dev; + struct resource *r; + int ret, irq; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + mmc = mmc_alloc_host(sizeof(struct pxamci_host), dev); + if (!mmc) { + ret = -ENOMEM; + goto out; + } + + mmc->ops = &pxamci_ops; + + /* + * We can do SG-DMA, but we don't because we never know how much + * data we successfully wrote to the card. + */ + mmc->max_segs = NR_SG; + + /* + * Our hardware DMA can handle a maximum of one page per SG entry. + */ + mmc->max_seg_size = PAGE_SIZE; + + /* + * Block length register is only 10 bits before PXA27x. + */ + mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048; + + /* + * Block count register is 16 bits. + */ + mmc->max_blk_count = 65535; + + ret = pxamci_of_init(pdev, mmc); + if (ret) + return ret; + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdata = pdev->dev.platform_data; + host->clkrt = CLKRT_OFF; + + host->clk = devm_clk_get(dev, NULL); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + host->clk = NULL; + goto out; + } + + host->clkrate = clk_get_rate(host->clk); + + /* + * Calculate minimum clock rate, rounding up. + */ + mmc->f_min = (host->clkrate + 63) / 64; + mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate; + + ret = pxamci_init_ocr(host); + if (ret < 0) + return ret; + + mmc->caps = 0; + host->cmdat = 0; + if (!cpu_is_pxa25x()) { + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + host->cmdat |= CMDAT_SDIO_INT_EN; + if (mmc_has_26MHz()) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED; + } + + spin_lock_init(&host->lock); + host->res = r; + host->imask = MMC_I_MASK_ALL; + + host->base = devm_ioremap_resource(dev, r); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto out; + } + + /* + * Ensure that the host controller is shut down, and setup + * with our defaults. + */ + pxamci_stop_clock(host); + writel(0, host->base + MMC_SPI); + writel(64, host->base + MMC_RESTO); + writel(host->imask, host->base + MMC_I_MASK); + + ret = devm_request_irq(dev, irq, pxamci_irq, 0, + DRIVER_NAME, host); + if (ret) + goto out; + + platform_set_drvdata(pdev, mmc); + + host->dma_chan_rx = dma_request_slave_channel(dev, "rx"); + if (host->dma_chan_rx == NULL) { + dev_err(dev, "unable to request rx dma channel\n"); + ret = -ENODEV; + goto out; + } + + host->dma_chan_tx = dma_request_slave_channel(dev, "tx"); + if (host->dma_chan_tx == NULL) { + dev_err(dev, "unable to request tx dma channel\n"); + ret = -ENODEV; + goto out; + } + + if (host->pdata) { + int gpio_cd = host->pdata->gpio_card_detect; + int gpio_ro = host->pdata->gpio_card_ro; + int gpio_power = host->pdata->gpio_power; + + host->detect_delay_ms = host->pdata->detect_delay_ms; + + if (gpio_is_valid(gpio_power)) { + ret = devm_gpio_request(dev, gpio_power, + "mmc card power"); + if (ret) { + dev_err(dev, + "Failed requesting gpio_power %d\n", + gpio_power); + goto out; + } + gpio_direction_output(gpio_power, + host->pdata->gpio_power_invert); + } + + if (gpio_is_valid(gpio_ro)) { + ret = mmc_gpio_request_ro(mmc, gpio_ro); + if (ret) { + dev_err(dev, + "Failed requesting gpio_ro %d\n", + gpio_ro); + goto out; + } else { + mmc->caps2 |= host->pdata->gpio_card_ro_invert ? + 0 : MMC_CAP2_RO_ACTIVE_HIGH; + } + } + + if (gpio_is_valid(gpio_cd)) + ret = mmc_gpio_request_cd(mmc, gpio_cd, 0); + if (ret) { + dev_err(dev, "Failed requesting gpio_cd %d\n", + gpio_cd); + goto out; + } + + if (host->pdata->init) + host->pdata->init(dev, pxamci_detect_irq, mmc); + + if (gpio_is_valid(gpio_power) && host->pdata->setpower) + dev_warn(dev, "gpio_power and setpower() both defined\n"); + if (gpio_is_valid(gpio_ro) && host->pdata->get_ro) + dev_warn(dev, "gpio_ro and get_ro() both defined\n"); + } + + mmc_add_host(mmc); + + return 0; + +out: + if (host) { + if (host->dma_chan_rx) + dma_release_channel(host->dma_chan_rx); + if (host->dma_chan_tx) + dma_release_channel(host->dma_chan_tx); + } + if (mmc) + mmc_free_host(mmc); + return ret; +} + +static int pxamci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + + if (mmc) { + struct pxamci_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + + if (host->pdata && host->pdata->exit) + host->pdata->exit(&pdev->dev, mmc); + + pxamci_stop_clock(host); + writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD| + END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, + host->base + MMC_I_MASK); + + dmaengine_terminate_all(host->dma_chan_rx); + dmaengine_terminate_all(host->dma_chan_tx); + dma_release_channel(host->dma_chan_rx); + dma_release_channel(host->dma_chan_tx); + + mmc_free_host(mmc); + } + + return 0; +} + +static struct platform_driver pxamci_driver = { + .probe = pxamci_probe, + .remove = pxamci_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(pxa_mmc_dt_ids), + }, +}; + +module_platform_driver(pxamci_driver); + +MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-mci"); |