diff options
Diffstat (limited to 'drivers/mtd/nand/raw/jz4780_nand.c')
-rw-r--r-- | drivers/mtd/nand/raw/jz4780_nand.c | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c new file mode 100644 index 000000000..b072bd5dd --- /dev/null +++ b/drivers/mtd/nand/raw/jz4780_nand.c @@ -0,0 +1,415 @@ +/* + * JZ4780 NAND driver + * + * Copyright (c) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/rawnand.h> +#include <linux/mtd/partitions.h> + +#include <linux/jz4780-nemc.h> + +#include "jz4780_bch.h" + +#define DRV_NAME "jz4780-nand" + +#define OFFSET_DATA 0x00000000 +#define OFFSET_CMD 0x00400000 +#define OFFSET_ADDR 0x00800000 + +/* Command delay when there is no R/B pin. */ +#define RB_DELAY_US 100 + +struct jz4780_nand_cs { + unsigned int bank; + void __iomem *base; +}; + +struct jz4780_nand_controller { + struct device *dev; + struct jz4780_bch *bch; + struct nand_controller controller; + unsigned int num_banks; + struct list_head chips; + int selected; + struct jz4780_nand_cs cs[]; +}; + +struct jz4780_nand_chip { + struct nand_chip chip; + struct list_head chip_list; + + struct gpio_desc *busy_gpio; + struct gpio_desc *wp_gpio; + unsigned int reading: 1; +}; + +static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd) +{ + return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip); +} + +static inline struct jz4780_nand_controller +*to_jz4780_nand_controller(struct nand_controller *ctrl) +{ + return container_of(ctrl, struct jz4780_nand_controller, controller); +} + +static void jz4780_nand_select_chip(struct mtd_info *mtd, int chipnr) +{ + struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd); + struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller); + struct jz4780_nand_cs *cs; + + /* Ensure the currently selected chip is deasserted. */ + if (chipnr == -1 && nfc->selected >= 0) { + cs = &nfc->cs[nfc->selected]; + jz4780_nemc_assert(nfc->dev, cs->bank, false); + } + + nfc->selected = chipnr; +} + +static void jz4780_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd); + struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller); + struct jz4780_nand_cs *cs; + + if (WARN_ON(nfc->selected < 0)) + return; + + cs = &nfc->cs[nfc->selected]; + + jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE); + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_ALE) + writeb(cmd, cs->base + OFFSET_ADDR); + else if (ctrl & NAND_CLE) + writeb(cmd, cs->base + OFFSET_CMD); +} + +static int jz4780_nand_dev_ready(struct mtd_info *mtd) +{ + struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd); + + return !gpiod_get_value_cansleep(nand->busy_gpio); +} + +static void jz4780_nand_ecc_hwctl(struct mtd_info *mtd, int mode) +{ + struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd); + + nand->reading = (mode == NAND_ECC_READ); +} + +static int jz4780_nand_ecc_calculate(struct mtd_info *mtd, const u8 *dat, + u8 *ecc_code) +{ + struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd); + struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller); + struct jz4780_bch_params params; + + /* + * Don't need to generate the ECC when reading, BCH does it for us as + * part of decoding/correction. + */ + if (nand->reading) + return 0; + + params.size = nand->chip.ecc.size; + params.bytes = nand->chip.ecc.bytes; + params.strength = nand->chip.ecc.strength; + + return jz4780_bch_calculate(nfc->bch, ¶ms, dat, ecc_code); +} + +static int jz4780_nand_ecc_correct(struct mtd_info *mtd, u8 *dat, + u8 *read_ecc, u8 *calc_ecc) +{ + struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd); + struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller); + struct jz4780_bch_params params; + + params.size = nand->chip.ecc.size; + params.bytes = nand->chip.ecc.bytes; + params.strength = nand->chip.ecc.strength; + + return jz4780_bch_correct(nfc->bch, ¶ms, dat, read_ecc); +} + +static int jz4780_nand_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller); + int eccbytes; + + chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) * + (chip->ecc.strength / 8); + + switch (chip->ecc.mode) { + case NAND_ECC_HW: + if (!nfc->bch) { + dev_err(nfc->dev, + "HW BCH selected, but BCH controller not found\n"); + return -ENODEV; + } + + chip->ecc.hwctl = jz4780_nand_ecc_hwctl; + chip->ecc.calculate = jz4780_nand_ecc_calculate; + chip->ecc.correct = jz4780_nand_ecc_correct; + /* fall through */ + case NAND_ECC_SOFT: + dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n", + (nfc->bch) ? "hardware BCH" : "software ECC", + chip->ecc.strength, chip->ecc.size, chip->ecc.bytes); + break; + case NAND_ECC_NONE: + dev_info(nfc->dev, "not using ECC\n"); + break; + default: + dev_err(nfc->dev, "ECC mode %d not supported\n", + chip->ecc.mode); + return -EINVAL; + } + + /* The NAND core will generate the ECC layout for SW ECC */ + if (chip->ecc.mode != NAND_ECC_HW) + return 0; + + /* Generate ECC layout. ECC codes are right aligned in the OOB area. */ + eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes; + + if (eccbytes > mtd->oobsize - 2) { + dev_err(nfc->dev, + "invalid ECC config: required %d ECC bytes, but only %d are available", + eccbytes, mtd->oobsize - 2); + return -EINVAL; + } + + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + + return 0; +} + +static const struct nand_controller_ops jz4780_nand_controller_ops = { + .attach_chip = jz4780_nand_attach_chip, +}; + +static int jz4780_nand_init_chip(struct platform_device *pdev, + struct jz4780_nand_controller *nfc, + struct device_node *np, + unsigned int chipnr) +{ + struct device *dev = &pdev->dev; + struct jz4780_nand_chip *nand; + struct jz4780_nand_cs *cs; + struct resource *res; + struct nand_chip *chip; + struct mtd_info *mtd; + const __be32 *reg; + int ret = 0; + + cs = &nfc->cs[chipnr]; + + reg = of_get_property(np, "reg", NULL); + if (!reg) + return -EINVAL; + + cs->bank = be32_to_cpu(*reg); + + jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND); + + res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr); + cs->base = devm_ioremap_resource(dev, res); + if (IS_ERR(cs->base)) + return PTR_ERR(cs->base); + + nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL); + if (!nand) + return -ENOMEM; + + nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN); + + if (IS_ERR(nand->busy_gpio)) { + ret = PTR_ERR(nand->busy_gpio); + dev_err(dev, "failed to request busy GPIO: %d\n", ret); + return ret; + } else if (nand->busy_gpio) { + nand->chip.dev_ready = jz4780_nand_dev_ready; + } + + nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW); + + if (IS_ERR(nand->wp_gpio)) { + ret = PTR_ERR(nand->wp_gpio); + dev_err(dev, "failed to request WP GPIO: %d\n", ret); + return ret; + } + + chip = &nand->chip; + mtd = nand_to_mtd(chip); + mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev), + cs->bank); + if (!mtd->name) + return -ENOMEM; + mtd->dev.parent = dev; + + chip->IO_ADDR_R = cs->base + OFFSET_DATA; + chip->IO_ADDR_W = cs->base + OFFSET_DATA; + chip->chip_delay = RB_DELAY_US; + chip->options = NAND_NO_SUBPAGE_WRITE; + chip->select_chip = jz4780_nand_select_chip; + chip->cmd_ctrl = jz4780_nand_cmd_ctrl; + chip->ecc.mode = NAND_ECC_HW; + chip->controller = &nfc->controller; + nand_set_flash_node(chip, np); + + chip->controller->ops = &jz4780_nand_controller_ops; + ret = nand_scan(chip, 1); + if (ret) + return ret; + + ret = mtd_device_register(mtd, NULL, 0); + if (ret) { + nand_release(chip); + return ret; + } + + list_add_tail(&nand->chip_list, &nfc->chips); + + return 0; +} + +static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc) +{ + struct jz4780_nand_chip *chip; + + while (!list_empty(&nfc->chips)) { + chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list); + nand_release(&chip->chip); + list_del(&chip->chip_list); + } +} + +static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np; + int i = 0; + int ret; + int num_chips = of_get_child_count(dev->of_node); + + if (num_chips > nfc->num_banks) { + dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks); + return -EINVAL; + } + + for_each_child_of_node(dev->of_node, np) { + ret = jz4780_nand_init_chip(pdev, nfc, np, i); + if (ret) { + jz4780_nand_cleanup_chips(nfc); + return ret; + } + + i++; + } + + return 0; +} + +static int jz4780_nand_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + unsigned int num_banks; + struct jz4780_nand_controller *nfc; + int ret; + + num_banks = jz4780_nemc_num_banks(dev); + if (num_banks == 0) { + dev_err(dev, "no banks found\n"); + return -ENODEV; + } + + nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL); + if (!nfc) + return -ENOMEM; + + /* + * Check for BCH HW before we call nand_scan_ident, to prevent us from + * having to call it again if the BCH driver returns -EPROBE_DEFER. + */ + nfc->bch = of_jz4780_bch_get(dev->of_node); + if (IS_ERR(nfc->bch)) + return PTR_ERR(nfc->bch); + + nfc->dev = dev; + nfc->num_banks = num_banks; + + nand_controller_init(&nfc->controller); + INIT_LIST_HEAD(&nfc->chips); + + ret = jz4780_nand_init_chips(nfc, pdev); + if (ret) { + if (nfc->bch) + jz4780_bch_release(nfc->bch); + return ret; + } + + platform_set_drvdata(pdev, nfc); + return 0; +} + +static int jz4780_nand_remove(struct platform_device *pdev) +{ + struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev); + + if (nfc->bch) + jz4780_bch_release(nfc->bch); + + jz4780_nand_cleanup_chips(nfc); + + return 0; +} + +static const struct of_device_id jz4780_nand_dt_match[] = { + { .compatible = "ingenic,jz4780-nand" }, + {}, +}; +MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match); + +static struct platform_driver jz4780_nand_driver = { + .probe = jz4780_nand_probe, + .remove = jz4780_nand_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(jz4780_nand_dt_match), + }, +}; +module_platform_driver(jz4780_nand_driver); + +MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>"); +MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>"); +MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver"); +MODULE_LICENSE("GPL v2"); |