diff options
Diffstat (limited to 'drivers/net/ethernet/8390/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/8390/Kconfig | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig new file mode 100644 index 000000000..443b34e27 --- /dev/null +++ b/drivers/net/ethernet/8390/Kconfig @@ -0,0 +1,208 @@ +# +# 8390 device configuration +# + +config NET_VENDOR_8390 + bool "National Semiconductor 8390 devices" + default y + depends on NET_VENDOR_NATSEMI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Western Digital cards. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_VENDOR_8390 + +config PCMCIA_AXNET + tristate "Asix AX88190 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach an Asix AX88190-based PCMCIA + (PC-card) Fast Ethernet card to your computer. These cards are + nearly NE2000 compatible but need a separate driver due to a few + misfeatures. + + To compile this driver as a module, choose M here: the module will be + called axnet_cs. If unsure, say N. + +config AX88796 + tristate "ASIX AX88796 NE2000 clone support" if !ZORRO + depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST) + select CRC32 + select PHYLIB + select MDIO_BITBANG + ---help--- + AX88796 driver, using platform bus to provide + chip detection and resources + +config AX88796_93CX6 + bool "ASIX AX88796 external 93CX6 eeprom support" + depends on AX88796 + select EEPROM_93CX6 + ---help--- + Select this if your platform comes with an external 93CX6 eeprom. + +config XSURF100 + tristate "Amiga XSurf 100 AX88796/NE2000 clone support" + depends on ZORRO + select AX88796 + select AX88796B_PHY + help + This driver is for the Individual Computers X-Surf 100 Ethernet + card (based on the Asix AX88796 chip). If you have such a card, + say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called xsurf100. + +config HYDRA + tristate "Hydra support" + depends on ZORRO + select CRC32 + ---help--- + If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called hydra. + +config ARM_ETHERH + tristate "I-cubed EtherH/ANT EtherM support" + depends on ARM && ARCH_ACORN + select CRC32 + ---help--- + If you have an Acorn system with one of these network cards, you + should say Y to this option if you wish to use it with Linux. + +config MAC8390 + tristate "Macintosh NS 8390 based ethernet cards" + depends on MAC + select CRC32 + ---help--- + If you want to include a driver to support Nubus or LC-PDS + Ethernet cards using an NS8390 chipset or its equivalent, say Y. + +config MCF8390 + tristate "ColdFire NS8390 based Ethernet support" + depends on COLDFIRE + select CRC32 + ---help--- + This driver is for Ethernet devices using an NS8390-compatible + chipset on many common ColdFire CPU based boards. Many of the older + Freescale dev boards use this, and some other common boards like + some SnapGear routers do as well. + + If you have one of these boards and want to use the network interface + on them then choose Y. To compile this driver as a module, choose M + here, the module will be called mcf8390. + +config NE2000 + tristate "NE2000/NE1000 support" + depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC) + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y here. + Many Ethernet cards without a specific driver are compatible with + the NE2000. + + If you have a PCI NE2000 card however, say N here and Y to "PCI + NE2000 and clone support" below. + + To compile this driver as a module, choose M here. The module + will be called ne. + +config NE2K_PCI + tristate "PCI NE2000 and clones support (see help)" + depends on PCI + select CRC32 + ---help--- + This driver is for NE2000 compatible PCI cards. It will not work + with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 + support" below). If you have a PCI NE2000 network (Ethernet) card, + say Y here. + + This driver also works for the following NE2000 clone cards: + RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 + NetVin NV5000SC Via 86C926 SureCom NE34 Winbond + Holtek HT80232 Holtek HT80229 + + To compile this driver as a module, choose M here. The module + will be called ne2k-pci. + +config APNE + tristate "PCMCIA NE2000 support" + depends on AMIGA_PCMCIA + select CRC32 + ---help--- + If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the module + will be called apne. + +config PCMCIA_PCNET + tristate "NE2000 compatible PCMCIA support" + depends on PCMCIA + select CRC32 + ---help--- + Say Y here if you intend to attach an NE2000 compatible PCMCIA + (PC-card) Ethernet or Fast Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called pcnet_cs. If unsure, say N. + +config STNIC + tristate "National DP83902AV support" + depends on SUPERH + select CRC32 + ---help--- + Support for cards based on the National Semiconductor DP83902AV + ST-NIC Serial Network Interface Controller for Twisted Pair. This + is a 10Mbit/sec Ethernet controller. Product overview and specs at + <http://www.national.com/pf/DP/DP83902A.html>. + + If unsure, say N. + +config ULTRA + tristate "SMC Ultra support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y here. + + Important: There have been many reports that, with some motherboards + mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, + such as some BusLogic models) causes corruption problems with many + operating systems. The Linux smc-ultra driver has a work-around for + this but keep it in mind if you have such a SCSI card and have + problems. + + To compile this driver as a module, choose M here. The module + will be called smc-ultra. + +config WD80x3 + tristate "WD80*3 support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y here. + + To compile this driver as a module, choose M here. The module + will be called wd. + +config ZORRO8390 + tristate "Zorro NS8390-based Ethernet support" + depends on ZORRO + select CRC32 + ---help--- + This driver is for Zorro Ethernet cards using an NS8390-compatible + chipset, like the Village Tronic Ariadne II and the Individual + Computers X-Surf Ethernet cards. If you have such a card, say Y. + Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called zorro8390. + +endif # NET_VENDOR_8390 |