diff options
Diffstat (limited to 'drivers/net/ethernet/atheros/atlx/atl2.c')
| -rw-r--r-- | drivers/net/ethernet/atheros/atlx/atl2.c | 3082 |
1 files changed, 3082 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c new file mode 100644 index 000000000..31ff1e0d1 --- /dev/null +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -0,0 +1,3082 @@ +/* + * Copyright(c) 2006 - 2007 Atheros Corporation. All rights reserved. + * Copyright(c) 2007 - 2008 Chris Snook <csnook@redhat.com> + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/atomic.h> +#include <linux/crc32.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/hardirq.h> +#include <linux/if_vlan.h> +#include <linux/in.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <linux/irqflags.h> +#include <linux/irqreturn.h> +#include <linux/mii.h> +#include <linux/net.h> +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/pm.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/tcp.h> +#include <linux/timer.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#include "atl2.h" + +#define ATL2_DRV_VERSION "2.2.3" + +static const char atl2_driver_name[] = "atl2"; +static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver"; +static const char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation."; +static const char atl2_driver_version[] = ATL2_DRV_VERSION; +static const struct ethtool_ops atl2_ethtool_ops; + +MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>"); +MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATL2_DRV_VERSION); + +/* + * atl2_pci_tbl - PCI Device ID Table + */ +static const struct pci_device_id atl2_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)}, + /* required last entry */ + {0,} +}; +MODULE_DEVICE_TABLE(pci, atl2_pci_tbl); + +static void atl2_check_options(struct atl2_adapter *adapter); + +/** + * atl2_sw_init - Initialize general software structures (struct atl2_adapter) + * @adapter: board private structure to initialize + * + * atl2_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int atl2_sw_init(struct atl2_adapter *adapter) +{ + struct atl2_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_id = pdev->subsystem_device; + hw->revision_id = pdev->revision; + + pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); + + adapter->wol = 0; + adapter->ict = 50000; /* ~100ms */ + adapter->link_speed = SPEED_0; /* hardware init */ + adapter->link_duplex = FULL_DUPLEX; + + hw->phy_configured = false; + hw->preamble_len = 7; + hw->ipgt = 0x60; + hw->min_ifg = 0x50; + hw->ipgr1 = 0x40; + hw->ipgr2 = 0x60; + hw->retry_buf = 2; + hw->max_retry = 0xf; + hw->lcol = 0x37; + hw->jam_ipg = 7; + hw->fc_rxd_hi = 0; + hw->fc_rxd_lo = 0; + hw->max_frame_size = adapter->netdev->mtu; + + spin_lock_init(&adapter->stats_lock); + + set_bit(__ATL2_DOWN, &adapter->flags); + + return 0; +} + +/** + * atl2_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + */ +static void atl2_set_multi(struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + struct netdev_hw_addr *ha; + u32 rctl; + u32 hash_value; + + /* Check for Promiscuous and All Multicast modes */ + rctl = ATL2_READ_REG(hw, REG_MAC_CTRL); + + if (netdev->flags & IFF_PROMISC) { + rctl |= MAC_CTRL_PROMIS_EN; + } else if (netdev->flags & IFF_ALLMULTI) { + rctl |= MAC_CTRL_MC_ALL_EN; + rctl &= ~MAC_CTRL_PROMIS_EN; + } else + rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); + + ATL2_WRITE_REG(hw, REG_MAC_CTRL, rctl); + + /* clear the old settings from the multicast hash table */ + ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); + ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); + + /* comoute mc addresses' hash value ,and put it into hash table */ + netdev_for_each_mc_addr(ha, netdev) { + hash_value = atl2_hash_mc_addr(hw, ha->addr); + atl2_hash_set(hw, hash_value); + } +} + +static void init_ring_ptrs(struct atl2_adapter *adapter) +{ + /* Read / Write Ptr Initialize: */ + adapter->txd_write_ptr = 0; + atomic_set(&adapter->txd_read_ptr, 0); + + adapter->rxd_read_ptr = 0; + adapter->rxd_write_ptr = 0; + + atomic_set(&adapter->txs_write_ptr, 0); + adapter->txs_next_clear = 0; +} + +/** + * atl2_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static int atl2_configure(struct atl2_adapter *adapter) +{ + struct atl2_hw *hw = &adapter->hw; + u32 value; + + /* clear interrupt status */ + ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0xffffffff); + + /* set MAC Address */ + value = (((u32)hw->mac_addr[2]) << 24) | + (((u32)hw->mac_addr[3]) << 16) | + (((u32)hw->mac_addr[4]) << 8) | + (((u32)hw->mac_addr[5])); + ATL2_WRITE_REG(hw, REG_MAC_STA_ADDR, value); + value = (((u32)hw->mac_addr[0]) << 8) | + (((u32)hw->mac_addr[1])); + ATL2_WRITE_REG(hw, (REG_MAC_STA_ADDR+4), value); + + /* HI base address */ + ATL2_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI, + (u32)((adapter->ring_dma & 0xffffffff00000000ULL) >> 32)); + + /* LO base address */ + ATL2_WRITE_REG(hw, REG_TXD_BASE_ADDR_LO, + (u32)(adapter->txd_dma & 0x00000000ffffffffULL)); + ATL2_WRITE_REG(hw, REG_TXS_BASE_ADDR_LO, + (u32)(adapter->txs_dma & 0x00000000ffffffffULL)); + ATL2_WRITE_REG(hw, REG_RXD_BASE_ADDR_LO, + (u32)(adapter->rxd_dma & 0x00000000ffffffffULL)); + + /* element count */ + ATL2_WRITE_REGW(hw, REG_TXD_MEM_SIZE, (u16)(adapter->txd_ring_size/4)); + ATL2_WRITE_REGW(hw, REG_TXS_MEM_SIZE, (u16)adapter->txs_ring_size); + ATL2_WRITE_REGW(hw, REG_RXD_BUF_NUM, (u16)adapter->rxd_ring_size); + + /* config Internal SRAM */ +/* + ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_tx_end); + ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_rx_end); +*/ + + /* config IPG/IFG */ + value = (((u32)hw->ipgt & MAC_IPG_IFG_IPGT_MASK) << + MAC_IPG_IFG_IPGT_SHIFT) | + (((u32)hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) << + MAC_IPG_IFG_MIFG_SHIFT) | + (((u32)hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) << + MAC_IPG_IFG_IPGR1_SHIFT)| + (((u32)hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) << + MAC_IPG_IFG_IPGR2_SHIFT); + ATL2_WRITE_REG(hw, REG_MAC_IPG_IFG, value); + + /* config Half-Duplex Control */ + value = ((u32)hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | + (((u32)hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) << + MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | + MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | + (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | + (((u32)hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) << + MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); + ATL2_WRITE_REG(hw, REG_MAC_HALF_DUPLX_CTRL, value); + + /* set Interrupt Moderator Timer */ + ATL2_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, adapter->imt); + ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_ITIMER_EN); + + /* set Interrupt Clear Timer */ + ATL2_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, adapter->ict); + + /* set MTU */ + ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu + + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN); + + /* 1590 */ + ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177); + + /* flow control */ + ATL2_WRITE_REGW(hw, REG_PAUSE_ON_TH, hw->fc_rxd_hi); + ATL2_WRITE_REGW(hw, REG_PAUSE_OFF_TH, hw->fc_rxd_lo); + + /* Init mailbox */ + ATL2_WRITE_REGW(hw, REG_MB_TXD_WR_IDX, (u16)adapter->txd_write_ptr); + ATL2_WRITE_REGW(hw, REG_MB_RXD_RD_IDX, (u16)adapter->rxd_read_ptr); + + /* enable DMA read/write */ + ATL2_WRITE_REGB(hw, REG_DMAR, DMAR_EN); + ATL2_WRITE_REGB(hw, REG_DMAW, DMAW_EN); + + value = ATL2_READ_REG(&adapter->hw, REG_ISR); + if ((value & ISR_PHY_LINKDOWN) != 0) + value = 1; /* config failed */ + else + value = 0; + + /* clear all interrupt status */ + ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0x3fffffff); + ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0); + return value; +} + +/** + * atl2_setup_ring_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int size; + u8 offset = 0; + + /* real ring DMA buffer */ + adapter->ring_size = size = + adapter->txd_ring_size * 1 + 7 + /* dword align */ + adapter->txs_ring_size * 4 + 7 + /* dword align */ + adapter->rxd_ring_size * 1536 + 127; /* 128bytes align */ + + adapter->ring_vir_addr = pci_alloc_consistent(pdev, size, + &adapter->ring_dma); + if (!adapter->ring_vir_addr) + return -ENOMEM; + memset(adapter->ring_vir_addr, 0, adapter->ring_size); + + /* Init TXD Ring */ + adapter->txd_dma = adapter->ring_dma ; + offset = (adapter->txd_dma & 0x7) ? (8 - (adapter->txd_dma & 0x7)) : 0; + adapter->txd_dma += offset; + adapter->txd_ring = adapter->ring_vir_addr + offset; + + /* Init TXS Ring */ + adapter->txs_dma = adapter->txd_dma + adapter->txd_ring_size; + offset = (adapter->txs_dma & 0x7) ? (8 - (adapter->txs_dma & 0x7)) : 0; + adapter->txs_dma += offset; + adapter->txs_ring = (struct tx_pkt_status *) + (((u8 *)adapter->txd_ring) + (adapter->txd_ring_size + offset)); + + /* Init RXD Ring */ + adapter->rxd_dma = adapter->txs_dma + adapter->txs_ring_size * 4; + offset = (adapter->rxd_dma & 127) ? + (128 - (adapter->rxd_dma & 127)) : 0; + if (offset > 7) + offset -= 8; + else + offset += (128 - 8); + + adapter->rxd_dma += offset; + adapter->rxd_ring = (struct rx_desc *) (((u8 *)adapter->txs_ring) + + (adapter->txs_ring_size * 4 + offset)); + +/* + * Read / Write Ptr Initialize: + * init_ring_ptrs(adapter); + */ + return 0; +} + +/** + * atl2_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + */ +static inline void atl2_irq_enable(struct atl2_adapter *adapter) +{ + ATL2_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK); + ATL2_WRITE_FLUSH(&adapter->hw); +} + +/** + * atl2_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + */ +static inline void atl2_irq_disable(struct atl2_adapter *adapter) +{ + ATL2_WRITE_REG(&adapter->hw, REG_IMR, 0); + ATL2_WRITE_FLUSH(&adapter->hw); + synchronize_irq(adapter->pdev->irq); +} + +static void __atl2_vlan_mode(netdev_features_t features, u32 *ctrl) +{ + if (features & NETIF_F_HW_VLAN_CTAG_RX) { + /* enable VLAN tag insert/strip */ + *ctrl |= MAC_CTRL_RMV_VLAN; + } else { + /* disable VLAN tag insert/strip */ + *ctrl &= ~MAC_CTRL_RMV_VLAN; + } +} + +static void atl2_vlan_mode(struct net_device *netdev, + netdev_features_t features) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + u32 ctrl; + + atl2_irq_disable(adapter); + + ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL); + __atl2_vlan_mode(features, &ctrl); + ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl); + + atl2_irq_enable(adapter); +} + +static void atl2_restore_vlan(struct atl2_adapter *adapter) +{ + atl2_vlan_mode(adapter->netdev, adapter->netdev->features); +} + +static netdev_features_t atl2_fix_features(struct net_device *netdev, + netdev_features_t features) +{ + /* + * Since there is no support for separate rx/tx vlan accel + * enable/disable make sure tx flag is always in same state as rx. + */ + if (features & NETIF_F_HW_VLAN_CTAG_RX) + features |= NETIF_F_HW_VLAN_CTAG_TX; + else + features &= ~NETIF_F_HW_VLAN_CTAG_TX; + + return features; +} + +static int atl2_set_features(struct net_device *netdev, + netdev_features_t features) +{ + netdev_features_t changed = netdev->features ^ features; + + if (changed & NETIF_F_HW_VLAN_CTAG_RX) + atl2_vlan_mode(netdev, features); + + return 0; +} + +static void atl2_intr_rx(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct rx_desc *rxd; + struct sk_buff *skb; + + do { + rxd = adapter->rxd_ring+adapter->rxd_write_ptr; + if (!rxd->status.update) + break; /* end of tx */ + + /* clear this flag at once */ + rxd->status.update = 0; + + if (rxd->status.ok && rxd->status.pkt_size >= 60) { + int rx_size = (int)(rxd->status.pkt_size - 4); + /* alloc new buffer */ + skb = netdev_alloc_skb_ip_align(netdev, rx_size); + if (NULL == skb) { + /* + * Check that some rx space is free. If not, + * free one and mark stats->rx_dropped++. + */ + netdev->stats.rx_dropped++; + break; + } + memcpy(skb->data, rxd->packet, rx_size); + skb_put(skb, rx_size); + skb->protocol = eth_type_trans(skb, netdev); + if (rxd->status.vlan) { + u16 vlan_tag = (rxd->status.vtag>>4) | + ((rxd->status.vtag&7) << 13) | + ((rxd->status.vtag&8) << 9); + + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); + } + netif_rx(skb); + netdev->stats.rx_bytes += rx_size; + netdev->stats.rx_packets++; + } else { + netdev->stats.rx_errors++; + + if (rxd->status.ok && rxd->status.pkt_size <= 60) + netdev->stats.rx_length_errors++; + if (rxd->status.mcast) + netdev->stats.multicast++; + if (rxd->status.crc) + netdev->stats.rx_crc_errors++; + if (rxd->status.align) + netdev->stats.rx_frame_errors++; + } + + /* advance write ptr */ + if (++adapter->rxd_write_ptr == adapter->rxd_ring_size) + adapter->rxd_write_ptr = 0; + } while (1); + + /* update mailbox? */ + adapter->rxd_read_ptr = adapter->rxd_write_ptr; + ATL2_WRITE_REGW(&adapter->hw, REG_MB_RXD_RD_IDX, adapter->rxd_read_ptr); +} + +static void atl2_intr_tx(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u32 txd_read_ptr; + u32 txs_write_ptr; + struct tx_pkt_status *txs; + struct tx_pkt_header *txph; + int free_hole = 0; + + do { + txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr); + txs = adapter->txs_ring + txs_write_ptr; + if (!txs->update) + break; /* tx stop here */ + + free_hole = 1; + txs->update = 0; + + if (++txs_write_ptr == adapter->txs_ring_size) + txs_write_ptr = 0; + atomic_set(&adapter->txs_write_ptr, (int)txs_write_ptr); + + txd_read_ptr = (u32) atomic_read(&adapter->txd_read_ptr); + txph = (struct tx_pkt_header *) + (((u8 *)adapter->txd_ring) + txd_read_ptr); + + if (txph->pkt_size != txs->pkt_size) { + struct tx_pkt_status *old_txs = txs; + printk(KERN_WARNING + "%s: txs packet size not consistent with txd" + " txd_:0x%08x, txs_:0x%08x!\n", + adapter->netdev->name, + *(u32 *)txph, *(u32 *)txs); + printk(KERN_WARNING + "txd read ptr: 0x%x\n", + txd_read_ptr); + txs = adapter->txs_ring + txs_write_ptr; + printk(KERN_WARNING + "txs-behind:0x%08x\n", + *(u32 *)txs); + if (txs_write_ptr < 2) { + txs = adapter->txs_ring + + (adapter->txs_ring_size + + txs_write_ptr - 2); + } else { + txs = adapter->txs_ring + (txs_write_ptr - 2); + } + printk(KERN_WARNING + "txs-before:0x%08x\n", + *(u32 *)txs); + txs = old_txs; + } + + /* 4for TPH */ + txd_read_ptr += (((u32)(txph->pkt_size) + 7) & ~3); + if (txd_read_ptr >= adapter->txd_ring_size) + txd_read_ptr -= adapter->txd_ring_size; + + atomic_set(&adapter->txd_read_ptr, (int)txd_read_ptr); + + /* tx statistics: */ + if (txs->ok) { + netdev->stats.tx_bytes += txs->pkt_size; + netdev->stats.tx_packets++; + } + else + netdev->stats.tx_errors++; + + if (txs->defer) + netdev->stats.collisions++; + if (txs->abort_col) + netdev->stats.tx_aborted_errors++; + if (txs->late_col) + netdev->stats.tx_window_errors++; + if (txs->underun) + netdev->stats.tx_fifo_errors++; + } while (1); + + if (free_hole) { + if (netif_queue_stopped(adapter->netdev) && + netif_carrier_ok(adapter->netdev)) + netif_wake_queue(adapter->netdev); + } +} + +static void atl2_check_for_link(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u16 phy_data = 0; + + spin_lock(&adapter->stats_lock); + atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + spin_unlock(&adapter->stats_lock); + + /* notify upper layer link down ASAP */ + if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ + if (netif_carrier_ok(netdev)) { /* old link state: Up */ + printk(KERN_INFO "%s: %s NIC Link is Down\n", + atl2_driver_name, netdev->name); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + } + schedule_work(&adapter->link_chg_task); +} + +static inline void atl2_clear_phy_int(struct atl2_adapter *adapter) +{ + u16 phy_data; + spin_lock(&adapter->stats_lock); + atl2_read_phy_reg(&adapter->hw, 19, &phy_data); + spin_unlock(&adapter->stats_lock); +} + +/** + * atl2_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + */ +static irqreturn_t atl2_intr(int irq, void *data) +{ + struct atl2_adapter *adapter = netdev_priv(data); + struct atl2_hw *hw = &adapter->hw; + u32 status; + + status = ATL2_READ_REG(hw, REG_ISR); + if (0 == status) + return IRQ_NONE; + + /* link event */ + if (status & ISR_PHY) + atl2_clear_phy_int(adapter); + + /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ + ATL2_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); + + /* check if PCIE PHY Link down */ + if (status & ISR_PHY_LINKDOWN) { + if (netif_running(adapter->netdev)) { /* reset MAC */ + ATL2_WRITE_REG(hw, REG_ISR, 0); + ATL2_WRITE_REG(hw, REG_IMR, 0); + ATL2_WRITE_FLUSH(hw); + schedule_work(&adapter->reset_task); + return IRQ_HANDLED; + } + } + + /* check if DMA read/write error? */ + if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { + ATL2_WRITE_REG(hw, REG_ISR, 0); + ATL2_WRITE_REG(hw, REG_IMR, 0); + ATL2_WRITE_FLUSH(hw); + schedule_work(&adapter->reset_task); + return IRQ_HANDLED; + } + + /* link event */ + if (status & (ISR_PHY | ISR_MANUAL)) { + adapter->netdev->stats.tx_carrier_errors++; + atl2_check_for_link(adapter); + } + + /* transmit event */ + if (status & ISR_TX_EVENT) + atl2_intr_tx(adapter); + + /* rx exception */ + if (status & ISR_RX_EVENT) + atl2_intr_rx(adapter); + + /* re-enable Interrupt */ + ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0); + return IRQ_HANDLED; +} + +static int atl2_request_irq(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int flags, err = 0; + + flags = IRQF_SHARED; + adapter->have_msi = true; + err = pci_enable_msi(adapter->pdev); + if (err) + adapter->have_msi = false; + + if (adapter->have_msi) + flags &= ~IRQF_SHARED; + + return request_irq(adapter->pdev->irq, atl2_intr, flags, netdev->name, + netdev); +} + +/** + * atl2_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +static void atl2_free_ring_resources(struct atl2_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr, + adapter->ring_dma); +} + +/** + * atl2_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl2_open(struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + int err; + u32 val; + + /* disallow open during test */ + if (test_bit(__ATL2_TESTING, &adapter->flags)) + return -EBUSY; + + /* allocate transmit descriptors */ + err = atl2_setup_ring_resources(adapter); + if (err) + return err; + + err = atl2_init_hw(&adapter->hw); + if (err) { + err = -EIO; + goto err_init_hw; + } + + /* hardware has been reset, we need to reload some things */ + atl2_set_multi(netdev); + init_ring_ptrs(adapter); + + atl2_restore_vlan(adapter); + + if (atl2_configure(adapter)) { + err = -EIO; + goto err_config; + } + + err = atl2_request_irq(adapter); + if (err) + goto err_req_irq; + + clear_bit(__ATL2_DOWN, &adapter->flags); + + mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 4*HZ)); + + val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL); + ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, + val | MASTER_CTRL_MANUAL_INT); + + atl2_irq_enable(adapter); + + return 0; + +err_init_hw: +err_req_irq: +err_config: + atl2_free_ring_resources(adapter); + atl2_reset_hw(&adapter->hw); + + return err; +} + +static void atl2_down(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__ATL2_DOWN, &adapter->flags); + + netif_tx_disable(netdev); + + /* reset MAC to disable all RX/TX */ + atl2_reset_hw(&adapter->hw); + msleep(1); + + atl2_irq_disable(adapter); + + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_config_timer); + clear_bit(0, &adapter->cfg_phy); + + netif_carrier_off(netdev); + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; +} + +static void atl2_free_irq(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + free_irq(adapter->pdev->irq, netdev); + +#ifdef CONFIG_PCI_MSI + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); +#endif +} + +/** + * atl2_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl2_close(struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + + WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags)); + + atl2_down(adapter); + atl2_free_irq(adapter); + atl2_free_ring_resources(adapter); + + return 0; +} + +static inline int TxsFreeUnit(struct atl2_adapter *adapter) +{ + u32 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr); + + return (adapter->txs_next_clear >= txs_write_ptr) ? + (int) (adapter->txs_ring_size - adapter->txs_next_clear + + txs_write_ptr - 1) : + (int) (txs_write_ptr - adapter->txs_next_clear - 1); +} + +static inline int TxdFreeBytes(struct atl2_adapter *adapter) +{ + u32 txd_read_ptr = (u32)atomic_read(&adapter->txd_read_ptr); + + return (adapter->txd_write_ptr >= txd_read_ptr) ? + (int) (adapter->txd_ring_size - adapter->txd_write_ptr + + txd_read_ptr - 1) : + (int) (txd_read_ptr - adapter->txd_write_ptr - 1); +} + +static netdev_tx_t atl2_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct tx_pkt_header *txph; + u32 offset, copy_len; + int txs_unused; + int txbuf_unused; + + if (test_bit(__ATL2_DOWN, &adapter->flags)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (unlikely(skb->len <= 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + txs_unused = TxsFreeUnit(adapter); + txbuf_unused = TxdFreeBytes(adapter); + + if (skb->len + sizeof(struct tx_pkt_header) + 4 > txbuf_unused || + txs_unused < 1) { + /* not enough resources */ + netif_stop_queue(netdev); + return NETDEV_TX_BUSY; + } + + offset = adapter->txd_write_ptr; + + txph = (struct tx_pkt_header *) (((u8 *)adapter->txd_ring) + offset); + + *(u32 *)txph = 0; + txph->pkt_size = skb->len; + + offset += 4; + if (offset >= adapter->txd_ring_size) + offset -= adapter->txd_ring_size; + copy_len = adapter->txd_ring_size - offset; + if (copy_len >= skb->len) { + memcpy(((u8 *)adapter->txd_ring) + offset, skb->data, skb->len); + offset += ((u32)(skb->len + 3) & ~3); + } else { + memcpy(((u8 *)adapter->txd_ring)+offset, skb->data, copy_len); + memcpy((u8 *)adapter->txd_ring, skb->data+copy_len, + skb->len-copy_len); + offset = ((u32)(skb->len-copy_len + 3) & ~3); + } +#ifdef NETIF_F_HW_VLAN_CTAG_TX + if (skb_vlan_tag_present(skb)) { + u16 vlan_tag = skb_vlan_tag_get(skb); + vlan_tag = (vlan_tag << 4) | + (vlan_tag >> 13) | + ((vlan_tag >> 9) & 0x8); + txph->ins_vlan = 1; + txph->vlan = vlan_tag; + } +#endif + if (offset >= adapter->txd_ring_size) + offset -= adapter->txd_ring_size; + adapter->txd_write_ptr = offset; + + /* clear txs before send */ + adapter->txs_ring[adapter->txs_next_clear].update = 0; + if (++adapter->txs_next_clear == adapter->txs_ring_size) + adapter->txs_next_clear = 0; + + ATL2_WRITE_REGW(&adapter->hw, REG_MB_TXD_WR_IDX, + (adapter->txd_write_ptr >> 2)); + + mmiowb(); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +/** + * atl2_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl2_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + + /* set MTU */ + netdev->mtu = new_mtu; + hw->max_frame_size = new_mtu; + ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN); + + return 0; +} + +/** + * atl2_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + */ +static int atl2_set_mac(struct net_device *netdev, void *p) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (netif_running(netdev)) + return -EBUSY; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); + + atl2_set_mac_addr(&adapter->hw); + + return 0; +} + +static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct mii_ioctl_data *data = if_mii(ifr); + unsigned long flags; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = 0; + break; + case SIOCGMIIREG: + spin_lock_irqsave(&adapter->stats_lock, flags); + if (atl2_read_phy_reg(&adapter->hw, + data->reg_num & 0x1F, &data->val_out)) { + spin_unlock_irqrestore(&adapter->stats_lock, flags); + return -EIO; + } + spin_unlock_irqrestore(&adapter->stats_lock, flags); + break; + case SIOCSMIIREG: + if (data->reg_num & ~(0x1F)) + return -EFAULT; + spin_lock_irqsave(&adapter->stats_lock, flags); + if (atl2_write_phy_reg(&adapter->hw, data->reg_num, + data->val_in)) { + spin_unlock_irqrestore(&adapter->stats_lock, flags); + return -EIO; + } + spin_unlock_irqrestore(&adapter->stats_lock, flags); + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return atl2_mii_ioctl(netdev, ifr, cmd); +#ifdef ETHTOOL_OPS_COMPAT + case SIOCETHTOOL: + return ethtool_ioctl(ifr); +#endif + default: + return -EOPNOTSUPP; + } +} + +/** + * atl2_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + */ +static void atl2_tx_timeout(struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); +} + +/** + * atl2_watchdog - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl2_watchdog(struct timer_list *t) +{ + struct atl2_adapter *adapter = from_timer(adapter, t, watchdog_timer); + + if (!test_bit(__ATL2_DOWN, &adapter->flags)) { + u32 drop_rxd, drop_rxs; + unsigned long flags; + + spin_lock_irqsave(&adapter->stats_lock, flags); + drop_rxd = ATL2_READ_REG(&adapter->hw, REG_STS_RXD_OV); + drop_rxs = ATL2_READ_REG(&adapter->hw, REG_STS_RXS_OV); + spin_unlock_irqrestore(&adapter->stats_lock, flags); + + adapter->netdev->stats.rx_over_errors += drop_rxd + drop_rxs; + + /* Reset the timer */ + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 4 * HZ)); + } +} + +/** + * atl2_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl2_phy_config(struct timer_list *t) +{ + struct atl2_adapter *adapter = from_timer(adapter, t, + phy_config_timer); + struct atl2_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->stats_lock, flags); + atl2_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); + atl2_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN | + MII_CR_RESTART_AUTO_NEG); + spin_unlock_irqrestore(&adapter->stats_lock, flags); + clear_bit(0, &adapter->cfg_phy); +} + +static int atl2_up(struct atl2_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err = 0; + u32 val; + + /* hardware has been reset, we need to reload some things */ + + err = atl2_init_hw(&adapter->hw); + if (err) { + err = -EIO; + return err; + } + + atl2_set_multi(netdev); + init_ring_ptrs(adapter); + + atl2_restore_vlan(adapter); + + if (atl2_configure(adapter)) { + err = -EIO; + goto err_up; + } + + clear_bit(__ATL2_DOWN, &adapter->flags); + + val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL); + ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, val | + MASTER_CTRL_MANUAL_INT); + + atl2_irq_enable(adapter); + +err_up: + return err; +} + +static void atl2_reinit_locked(struct atl2_adapter *adapter) +{ + WARN_ON(in_interrupt()); + while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags)) + msleep(1); + atl2_down(adapter); + atl2_up(adapter); + clear_bit(__ATL2_RESETTING, &adapter->flags); +} + +static void atl2_reset_task(struct work_struct *work) +{ + struct atl2_adapter *adapter; + adapter = container_of(work, struct atl2_adapter, reset_task); + + atl2_reinit_locked(adapter); +} + +static void atl2_setup_mac_ctrl(struct atl2_adapter *adapter) +{ + u32 value; + struct atl2_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + + /* Config MAC CTRL Register */ + value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY; + + /* duplex */ + if (FULL_DUPLEX == adapter->link_duplex) + value |= MAC_CTRL_DUPLX; + + /* flow control */ + value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + + /* PAD & CRC */ + value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + + /* preamble length */ + value |= (((u32)adapter->hw.preamble_len & MAC_CTRL_PRMLEN_MASK) << + MAC_CTRL_PRMLEN_SHIFT); + + /* vlan */ + __atl2_vlan_mode(netdev->features, &value); + + /* filter mode */ + value |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + value |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) + value |= MAC_CTRL_MC_ALL_EN; + + /* half retry buffer */ + value |= (((u32)(adapter->hw.retry_buf & + MAC_CTRL_HALF_LEFT_BUF_MASK)) << MAC_CTRL_HALF_LEFT_BUF_SHIFT); + + ATL2_WRITE_REG(hw, REG_MAC_CTRL, value); +} + +static int atl2_check_link(struct atl2_adapter *adapter) +{ + struct atl2_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + int ret_val; + u16 speed, duplex, phy_data; + int reconfig = 0; + + /* MII_BMSR must read twise */ + atl2_read_phy_reg(hw, MII_BMSR, &phy_data); + atl2_read_phy_reg(hw, MII_BMSR, &phy_data); + if (!(phy_data&BMSR_LSTATUS)) { /* link down */ + if (netif_carrier_ok(netdev)) { /* old link state: Up */ + u32 value; + /* disable rx */ + value = ATL2_READ_REG(hw, REG_MAC_CTRL); + value &= ~MAC_CTRL_RX_EN; + ATL2_WRITE_REG(hw, REG_MAC_CTRL, value); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + return 0; + } + + /* Link Up */ + ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) + return ret_val; + switch (hw->MediaType) { + case MEDIA_TYPE_100M_FULL: + if (speed != SPEED_100 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_HALF: + if (speed != SPEED_100 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_FULL: + if (speed != SPEED_10 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_HALF: + if (speed != SPEED_10 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + } + /* link result is our setting */ + if (reconfig == 0) { + if (adapter->link_speed != speed || + adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl2_setup_mac_ctrl(adapter); + printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n", + atl2_driver_name, netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex"); + } + + if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } + return 0; + } + + /* change original link status */ + if (netif_carrier_ok(netdev)) { + u32 value; + /* disable rx */ + value = ATL2_READ_REG(hw, REG_MAC_CTRL); + value &= ~MAC_CTRL_RX_EN; + ATL2_WRITE_REG(hw, REG_MAC_CTRL, value); + + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + + /* auto-neg, insert timer to re-config phy + * (if interval smaller than 5 seconds, something strange) */ + if (!test_bit(__ATL2_DOWN, &adapter->flags)) { + if (!test_and_set_bit(0, &adapter->cfg_phy)) + mod_timer(&adapter->phy_config_timer, + round_jiffies(jiffies + 5 * HZ)); + } + + return 0; +} + +/** + * atl2_link_chg_task - deal with link change event Out of interrupt context + */ +static void atl2_link_chg_task(struct work_struct *work) +{ + struct atl2_adapter *adapter; + unsigned long flags; + + adapter = container_of(work, struct atl2_adapter, link_chg_task); + + spin_lock_irqsave(&adapter->stats_lock, flags); + atl2_check_link(adapter); + spin_unlock_irqrestore(&adapter->stats_lock, flags); +} + +static void atl2_setup_pcicmd(struct pci_dev *pdev) +{ + u16 cmd; + + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + + if (cmd & PCI_COMMAND_INTX_DISABLE) + cmd &= ~PCI_COMMAND_INTX_DISABLE; + if (cmd & PCI_COMMAND_IO) + cmd &= ~PCI_COMMAND_IO; + if (0 == (cmd & PCI_COMMAND_MEMORY)) + cmd |= PCI_COMMAND_MEMORY; + if (0 == (cmd & PCI_COMMAND_MASTER)) + cmd |= PCI_COMMAND_MASTER; + pci_write_config_word(pdev, PCI_COMMAND, cmd); + + /* + * some motherboards BIOS(PXE/EFI) driver may set PME + * while they transfer control to OS (Windows/Linux) + * so we should clear this bit before NIC work normally + */ + pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void atl2_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + atl2_intr(netdev->irq, netdev); + enable_irq(netdev->irq); +} +#endif + + +static const struct net_device_ops atl2_netdev_ops = { + .ndo_open = atl2_open, + .ndo_stop = atl2_close, + .ndo_start_xmit = atl2_xmit_frame, + .ndo_set_rx_mode = atl2_set_multi, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = atl2_set_mac, + .ndo_change_mtu = atl2_change_mtu, + .ndo_fix_features = atl2_fix_features, + .ndo_set_features = atl2_set_features, + .ndo_do_ioctl = atl2_ioctl, + .ndo_tx_timeout = atl2_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = atl2_poll_controller, +#endif +}; + +/** + * atl2_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl2_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl2_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl2_adapter *adapter; + static int cards_found = 0; + unsigned long mmio_start; + int mmio_len; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + /* + * atl2 is a shared-high-32-bit device, so we're stuck with 32-bit DMA + * until the kernel has the proper infrastructure to support 64-bit DMA + * on these devices. + */ + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) && + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n"); + err = -EIO; + goto err_dma; + } + + /* Mark all PCI regions associated with PCI device + * pdev as being reserved by owner atl2_driver_name */ + err = pci_request_regions(pdev, atl2_driver_name); + if (err) + goto err_pci_reg; + + /* Enables bus-mastering on the device and calls + * pcibios_set_master to do the needed arch specific settings */ + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl2_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + + mmio_start = pci_resource_start(pdev, 0x0); + mmio_len = pci_resource_len(pdev, 0x0); + + adapter->hw.mem_rang = (u32)mmio_len; + adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); + if (!adapter->hw.hw_addr) { + err = -EIO; + goto err_ioremap; + } + + atl2_setup_pcicmd(pdev); + + netdev->netdev_ops = &atl2_netdev_ops; + netdev->ethtool_ops = &atl2_ethtool_ops; + netdev->watchdog_timeo = 5 * HZ; + netdev->min_mtu = 40; + netdev->max_mtu = ETH_DATA_LEN + VLAN_HLEN; + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len; + adapter->bd_number = cards_found; + adapter->pci_using_64 = false; + + /* setup the private structure */ + err = atl2_sw_init(adapter); + if (err) + goto err_sw_init; + + netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX; + netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX); + + /* Init PHY as early as possible due to power saving issue */ + atl2_phy_init(&adapter->hw); + + /* reset the controller to + * put the device in a known good starting state */ + + if (atl2_reset_hw(&adapter->hw)) { + err = -EIO; + goto err_reset; + } + + /* copy the MAC address out of the EEPROM */ + atl2_read_mac_addr(&adapter->hw); + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + if (!is_valid_ether_addr(netdev->dev_addr)) { + err = -EIO; + goto err_eeprom; + } + + atl2_check_options(adapter); + + timer_setup(&adapter->watchdog_timer, atl2_watchdog, 0); + + timer_setup(&adapter->phy_config_timer, atl2_phy_config, 0); + + INIT_WORK(&adapter->reset_task, atl2_reset_task); + INIT_WORK(&adapter->link_chg_task, atl2_link_chg_task); + + strcpy(netdev->name, "eth%d"); /* ?? */ + err = register_netdev(netdev); + if (err) + goto err_register; + + /* assume we have no link for now */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + cards_found++; + + return 0; + +err_reset: +err_register: +err_sw_init: +err_eeprom: + iounmap(adapter->hw.hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * atl2_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl2_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +/* FIXME: write the original MAC address back in case it was changed from a + * BIOS-set value, as in atl1 -- CHS */ +static void atl2_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl2_adapter *adapter = netdev_priv(netdev); + + /* flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled */ + set_bit(__ATL2_DOWN, &adapter->flags); + + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_config_timer); + cancel_work_sync(&adapter->reset_task); + cancel_work_sync(&adapter->link_chg_task); + + unregister_netdev(netdev); + + atl2_force_ps(&adapter->hw); + + iounmap(adapter->hw.hw_addr); + pci_release_regions(pdev); + + free_netdev(netdev); + + pci_disable_device(pdev); +} + +static int atl2_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + u16 speed, duplex; + u32 ctrl = 0; + u32 wufc = adapter->wol; + +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + if (netif_running(netdev)) { + WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags)); + atl2_down(adapter); + } + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl); + atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl); + if (ctrl & BMSR_LSTATUS) + wufc &= ~ATLX_WUFC_LNKC; + + if (0 != (ctrl & BMSR_LSTATUS) && 0 != wufc) { + u32 ret_val; + /* get current link speed & duplex */ + ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) { + printk(KERN_DEBUG + "%s: get speed&duplex error while suspend\n", + atl2_driver_name); + goto wol_dis; + } + + ctrl = 0; + + /* turn on magic packet wol */ + if (wufc & ATLX_WUFC_MAG) + ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN); + + /* ignore Link Chg event when Link is up */ + ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl); + + /* Config MAC CTRL Register */ + ctrl = MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY; + if (FULL_DUPLEX == adapter->link_duplex) + ctrl |= MAC_CTRL_DUPLX; + ctrl |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + ctrl |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + ctrl |= (((u32)(adapter->hw.retry_buf & + MAC_CTRL_HALF_LEFT_BUF_MASK)) << + MAC_CTRL_HALF_LEFT_BUF_SHIFT); + if (wufc & ATLX_WUFC_MAG) { + /* magic packet maybe Broadcast&multicast&Unicast */ + ctrl |= MAC_CTRL_BC_EN; + } + + ATL2_WRITE_REG(hw, REG_MAC_CTRL, ctrl); + + /* pcie patch */ + ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1); + ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK; + ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl); + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + goto suspend_exit; + } + + if (0 == (ctrl&BMSR_LSTATUS) && 0 != (wufc&ATLX_WUFC_LNKC)) { + /* link is down, so only LINK CHG WOL event enable */ + ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl); + ATL2_WRITE_REG(hw, REG_MAC_CTRL, 0); + + /* pcie patch */ + ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1); + ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK; + ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl); + + hw->phy_configured = false; /* re-init PHY when resume */ + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + + goto suspend_exit; + } + +wol_dis: + /* WOL disabled */ + ATL2_WRITE_REG(hw, REG_WOL_CTRL, 0); + + /* pcie patch */ + ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1); + ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK; + ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl); + + atl2_force_ps(hw); + hw->phy_configured = false; /* re-init PHY when resume */ + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + +suspend_exit: + if (netif_running(netdev)) + atl2_free_irq(adapter); + + pci_disable_device(pdev); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +#ifdef CONFIG_PM +static int atl2_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl2_adapter *adapter = netdev_priv(netdev); + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR + "atl2: Cannot enable PCI device from suspend\n"); + return err; + } + + pci_set_master(pdev); + + ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */ + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); + + if (netif_running(netdev)) { + err = atl2_request_irq(adapter); + if (err) + return err; + } + + atl2_reset_hw(&adapter->hw); + + if (netif_running(netdev)) + atl2_up(adapter); + + netif_device_attach(netdev); + + return 0; +} +#endif + +static void atl2_shutdown(struct pci_dev *pdev) +{ + atl2_suspend(pdev, PMSG_SUSPEND); +} + +static struct pci_driver atl2_driver = { + .name = atl2_driver_name, + .id_table = atl2_pci_tbl, + .probe = atl2_probe, + .remove = atl2_remove, + /* Power Management Hooks */ + .suspend = atl2_suspend, +#ifdef CONFIG_PM + .resume = atl2_resume, +#endif + .shutdown = atl2_shutdown, +}; + +/** + * atl2_init_module - Driver Registration Routine + * + * atl2_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + */ +static int __init atl2_init_module(void) +{ + printk(KERN_INFO "%s - version %s\n", atl2_driver_string, + atl2_driver_version); + printk(KERN_INFO "%s\n", atl2_copyright); + return pci_register_driver(&atl2_driver); +} +module_init(atl2_init_module); + +/** + * atl2_exit_module - Driver Exit Cleanup Routine + * + * atl2_exit_module is called just before the driver is removed + * from memory. + */ +static void __exit atl2_exit_module(void) +{ + pci_unregister_driver(&atl2_driver); +} +module_exit(atl2_exit_module); + +static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value) +{ + struct atl2_adapter *adapter = hw->back; + pci_read_config_word(adapter->pdev, reg, value); +} + +static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value) +{ + struct atl2_adapter *adapter = hw->back; + pci_write_config_word(adapter->pdev, reg, *value); +} + +static int atl2_get_link_ksettings(struct net_device *netdev, + struct ethtool_link_ksettings *cmd) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + u32 supported, advertising; + + supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP); + advertising = ADVERTISED_TP; + + advertising |= ADVERTISED_Autoneg; + advertising |= hw->autoneg_advertised; + + cmd->base.port = PORT_TP; + cmd->base.phy_address = 0; + + if (adapter->link_speed != SPEED_0) { + cmd->base.speed = adapter->link_speed; + if (adapter->link_duplex == FULL_DUPLEX) + cmd->base.duplex = DUPLEX_FULL; + else + cmd->base.duplex = DUPLEX_HALF; + } else { + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; + } + + cmd->base.autoneg = AUTONEG_ENABLE; + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, + advertising); + + return 0; +} + +static int atl2_set_link_ksettings(struct net_device *netdev, + const struct ethtool_link_ksettings *cmd) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + u32 advertising; + + ethtool_convert_link_mode_to_legacy_u32(&advertising, + cmd->link_modes.advertising); + + while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags)) + msleep(1); + + if (cmd->base.autoneg == AUTONEG_ENABLE) { +#define MY_ADV_MASK (ADVERTISE_10_HALF | \ + ADVERTISE_10_FULL | \ + ADVERTISE_100_HALF| \ + ADVERTISE_100_FULL) + + if ((advertising & MY_ADV_MASK) == MY_ADV_MASK) { + hw->MediaType = MEDIA_TYPE_AUTO_SENSOR; + hw->autoneg_advertised = MY_ADV_MASK; + } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_FULL) { + hw->MediaType = MEDIA_TYPE_100M_FULL; + hw->autoneg_advertised = ADVERTISE_100_FULL; + } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_HALF) { + hw->MediaType = MEDIA_TYPE_100M_HALF; + hw->autoneg_advertised = ADVERTISE_100_HALF; + } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_FULL) { + hw->MediaType = MEDIA_TYPE_10M_FULL; + hw->autoneg_advertised = ADVERTISE_10_FULL; + } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_HALF) { + hw->MediaType = MEDIA_TYPE_10M_HALF; + hw->autoneg_advertised = ADVERTISE_10_HALF; + } else { + clear_bit(__ATL2_RESETTING, &adapter->flags); + return -EINVAL; + } + advertising = hw->autoneg_advertised | + ADVERTISED_TP | ADVERTISED_Autoneg; + } else { + clear_bit(__ATL2_RESETTING, &adapter->flags); + return -EINVAL; + } + + /* reset the link */ + if (netif_running(adapter->netdev)) { + atl2_down(adapter); + atl2_up(adapter); + } else + atl2_reset_hw(&adapter->hw); + + clear_bit(__ATL2_RESETTING, &adapter->flags); + return 0; +} + +static u32 atl2_get_msglevel(struct net_device *netdev) +{ + return 0; +} + +/* + * It's sane for this to be empty, but we might want to take advantage of this. + */ +static void atl2_set_msglevel(struct net_device *netdev, u32 data) +{ +} + +static int atl2_get_regs_len(struct net_device *netdev) +{ +#define ATL2_REGS_LEN 42 + return sizeof(u32) * ATL2_REGS_LEN; +} + +static void atl2_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u16 phy_data; + + memset(p, 0, sizeof(u32) * ATL2_REGS_LEN); + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + regs_buff[0] = ATL2_READ_REG(hw, REG_VPD_CAP); + regs_buff[1] = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL); + regs_buff[2] = ATL2_READ_REG(hw, REG_SPI_FLASH_CONFIG); + regs_buff[3] = ATL2_READ_REG(hw, REG_TWSI_CTRL); + regs_buff[4] = ATL2_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL); + regs_buff[5] = ATL2_READ_REG(hw, REG_MASTER_CTRL); + regs_buff[6] = ATL2_READ_REG(hw, REG_MANUAL_TIMER_INIT); + regs_buff[7] = ATL2_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT); + regs_buff[8] = ATL2_READ_REG(hw, REG_PHY_ENABLE); + regs_buff[9] = ATL2_READ_REG(hw, REG_CMBDISDMA_TIMER); + regs_buff[10] = ATL2_READ_REG(hw, REG_IDLE_STATUS); + regs_buff[11] = ATL2_READ_REG(hw, REG_MDIO_CTRL); + regs_buff[12] = ATL2_READ_REG(hw, REG_SERDES_LOCK); + regs_buff[13] = ATL2_READ_REG(hw, REG_MAC_CTRL); + regs_buff[14] = ATL2_READ_REG(hw, REG_MAC_IPG_IFG); + regs_buff[15] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR); + regs_buff[16] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR+4); + regs_buff[17] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE); + regs_buff[18] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE+4); + regs_buff[19] = ATL2_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL); + regs_buff[20] = ATL2_READ_REG(hw, REG_MTU); + regs_buff[21] = ATL2_READ_REG(hw, REG_WOL_CTRL); + regs_buff[22] = ATL2_READ_REG(hw, REG_SRAM_TXRAM_END); + regs_buff[23] = ATL2_READ_REG(hw, REG_DESC_BASE_ADDR_HI); + regs_buff[24] = ATL2_READ_REG(hw, REG_TXD_BASE_ADDR_LO); + regs_buff[25] = ATL2_READ_REG(hw, REG_TXD_MEM_SIZE); + regs_buff[26] = ATL2_READ_REG(hw, REG_TXS_BASE_ADDR_LO); + regs_buff[27] = ATL2_READ_REG(hw, REG_TXS_MEM_SIZE); + regs_buff[28] = ATL2_READ_REG(hw, REG_RXD_BASE_ADDR_LO); + regs_buff[29] = ATL2_READ_REG(hw, REG_RXD_BUF_NUM); + regs_buff[30] = ATL2_READ_REG(hw, REG_DMAR); + regs_buff[31] = ATL2_READ_REG(hw, REG_TX_CUT_THRESH); + regs_buff[32] = ATL2_READ_REG(hw, REG_DMAW); + regs_buff[33] = ATL2_READ_REG(hw, REG_PAUSE_ON_TH); + regs_buff[34] = ATL2_READ_REG(hw, REG_PAUSE_OFF_TH); + regs_buff[35] = ATL2_READ_REG(hw, REG_MB_TXD_WR_IDX); + regs_buff[36] = ATL2_READ_REG(hw, REG_MB_RXD_RD_IDX); + regs_buff[38] = ATL2_READ_REG(hw, REG_ISR); + regs_buff[39] = ATL2_READ_REG(hw, REG_IMR); + + atl2_read_phy_reg(hw, MII_BMCR, &phy_data); + regs_buff[40] = (u32)phy_data; + atl2_read_phy_reg(hw, MII_BMSR, &phy_data); + regs_buff[41] = (u32)phy_data; +} + +static int atl2_get_eeprom_len(struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + + if (!atl2_check_eeprom_exist(&adapter->hw)) + return 512; + else + return 0; +} + +static int atl2_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + u32 *eeprom_buff; + int first_dword, last_dword; + int ret_val = 0; + int i; + + if (eeprom->len == 0) + return -EINVAL; + + if (atl2_check_eeprom_exist(hw)) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_dword = eeprom->offset >> 2; + last_dword = (eeprom->offset + eeprom->len - 1) >> 2; + + eeprom_buff = kmalloc_array(last_dword - first_dword + 1, sizeof(u32), + GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + for (i = first_dword; i < last_dword; i++) { + if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) { + ret_val = -EIO; + goto free; + } + } + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3), + eeprom->len); +free: + kfree(eeprom_buff); + + return ret_val; +} + +static int atl2_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + struct atl2_hw *hw = &adapter->hw; + u32 *eeprom_buff; + u32 *ptr; + int max_len, first_dword, last_dword, ret_val = 0; + int i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EFAULT; + + max_len = 512; + + first_dword = eeprom->offset >> 2; + last_dword = (eeprom->offset + eeprom->len - 1) >> 2; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = eeprom_buff; + + if (eeprom->offset & 3) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0]))) { + ret_val = -EIO; + goto out; + } + ptr++; + } + if (((eeprom->offset + eeprom->len) & 3)) { + /* + * need read/modify/write of last changed EEPROM word + * only the first byte of the word is being modified + */ + if (!atl2_read_eeprom(hw, last_dword * 4, + &(eeprom_buff[last_dword - first_dword]))) { + ret_val = -EIO; + goto out; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_dword - first_dword + 1; i++) { + if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i])) { + ret_val = -EIO; + goto out; + } + } + out: + kfree(eeprom_buff); + return ret_val; +} + +static void atl2_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + + strlcpy(drvinfo->driver, atl2_driver_name, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, atl2_driver_version, + sizeof(drvinfo->version)); + strlcpy(drvinfo->fw_version, "L2", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); +} + +static void atl2_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_MAGIC; + wol->wolopts = 0; + + if (adapter->wol & ATLX_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & ATLX_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & ATLX_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & ATLX_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + if (adapter->wol & ATLX_WUFC_LNKC) + wol->wolopts |= WAKE_PHY; +} + +static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)) + return -EOPNOTSUPP; + + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= ATLX_WUFC_MAG; + if (wol->wolopts & WAKE_PHY) + adapter->wol |= ATLX_WUFC_LNKC; + + return 0; +} + +static int atl2_nway_reset(struct net_device *netdev) +{ + struct atl2_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + atl2_reinit_locked(adapter); + return 0; +} + +static const struct ethtool_ops atl2_ethtool_ops = { + .get_drvinfo = atl2_get_drvinfo, + .get_regs_len = atl2_get_regs_len, + .get_regs = atl2_get_regs, + .get_wol = atl2_get_wol, + .set_wol = atl2_set_wol, + .get_msglevel = atl2_get_msglevel, + .set_msglevel = atl2_set_msglevel, + .nway_reset = atl2_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = atl2_get_eeprom_len, + .get_eeprom = atl2_get_eeprom, + .set_eeprom = atl2_set_eeprom, + .get_link_ksettings = atl2_get_link_ksettings, + .set_link_ksettings = atl2_set_link_ksettings, +}; + +#define LBYTESWAP(a) ((((a) & 0x00ff00ff) << 8) | \ + (((a) & 0xff00ff00) >> 8)) +#define LONGSWAP(a) ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16)) +#define SHORTSWAP(a) (((a) << 8) | ((a) >> 8)) + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static s32 atl2_reset_hw(struct atl2_hw *hw) +{ + u32 icr; + u16 pci_cfg_cmd_word; + int i; + + /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */ + atl2_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word); + if ((pci_cfg_cmd_word & + (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) != + (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) { + pci_cfg_cmd_word |= + (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER); + atl2_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word); + } + + /* Clear Interrupt mask to stop board from generating + * interrupts & Clear any pending interrupt events + */ + /* FIXME */ + /* ATL2_WRITE_REG(hw, REG_IMR, 0); */ + /* ATL2_WRITE_REG(hw, REG_ISR, 0xffffffff); */ + + /* Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST); + wmb(); + msleep(1); /* delay about 1ms */ + + /* Wait at least 10ms for All module to be Idle */ + for (i = 0; i < 10; i++) { + icr = ATL2_READ_REG(hw, REG_IDLE_STATUS); + if (!icr) + break; + msleep(1); /* delay 1 ms */ + cpu_relax(); + } + + if (icr) + return icr; + + return 0; +} + +#define CUSTOM_SPI_CS_SETUP 2 +#define CUSTOM_SPI_CLK_HI 2 +#define CUSTOM_SPI_CLK_LO 2 +#define CUSTOM_SPI_CS_HOLD 2 +#define CUSTOM_SPI_CS_HI 3 + +static struct atl2_spi_flash_dev flash_table[] = +{ +/* MFR WRSR READ PROGRAM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ +{"Atmel", 0x0, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62 }, +{"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60 }, +{"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7 }, +}; + +static bool atl2_spi_read(struct atl2_hw *hw, u32 addr, u32 *buf) +{ + int i; + u32 value; + + ATL2_WRITE_REG(hw, REG_SPI_DATA, 0); + ATL2_WRITE_REG(hw, REG_SPI_ADDR, addr); + + value = SPI_FLASH_CTRL_WAIT_READY | + (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << + SPI_FLASH_CTRL_CS_SETUP_SHIFT | + (CUSTOM_SPI_CLK_HI & SPI_FLASH_CTRL_CLK_HI_MASK) << + SPI_FLASH_CTRL_CLK_HI_SHIFT | + (CUSTOM_SPI_CLK_LO & SPI_FLASH_CTRL_CLK_LO_MASK) << + SPI_FLASH_CTRL_CLK_LO_SHIFT | + (CUSTOM_SPI_CS_HOLD & SPI_FLASH_CTRL_CS_HOLD_MASK) << + SPI_FLASH_CTRL_CS_HOLD_SHIFT | + (CUSTOM_SPI_CS_HI & SPI_FLASH_CTRL_CS_HI_MASK) << + SPI_FLASH_CTRL_CS_HI_SHIFT | + (0x1 & SPI_FLASH_CTRL_INS_MASK) << SPI_FLASH_CTRL_INS_SHIFT; + + ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value); + + value |= SPI_FLASH_CTRL_START; + + ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value); + + for (i = 0; i < 10; i++) { + msleep(1); + value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL); + if (!(value & SPI_FLASH_CTRL_START)) + break; + } + + if (value & SPI_FLASH_CTRL_START) + return false; + + *buf = ATL2_READ_REG(hw, REG_SPI_DATA); + + return true; +} + +/* + * get_permanent_address + * return 0 if get valid mac address, + */ +static int get_permanent_address(struct atl2_hw *hw) +{ + u32 Addr[2]; + u32 i, Control; + u16 Register; + u8 EthAddr[ETH_ALEN]; + bool KeyValid; + + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + Addr[0] = 0; + Addr[1] = 0; + + if (!atl2_check_eeprom_exist(hw)) { /* eeprom exists */ + Register = 0; + KeyValid = false; + + /* Read out all EEPROM content */ + i = 0; + while (1) { + if (atl2_read_eeprom(hw, i + 0x100, &Control)) { + if (KeyValid) { + if (Register == REG_MAC_STA_ADDR) + Addr[0] = Control; + else if (Register == + (REG_MAC_STA_ADDR + 4)) + Addr[1] = Control; + KeyValid = false; + } else if ((Control & 0xff) == 0x5A) { + KeyValid = true; + Register = (u16) (Control >> 16); + } else { + /* assume data end while encount an invalid KEYWORD */ + break; + } + } else { + break; /* read error */ + } + i += 4; + } + + *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]); + *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]); + + if (is_valid_ether_addr(EthAddr)) { + memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN); + return 0; + } + return 1; + } + + /* see if SPI flash exists? */ + Addr[0] = 0; + Addr[1] = 0; + Register = 0; + KeyValid = false; + i = 0; + while (1) { + if (atl2_spi_read(hw, i + 0x1f000, &Control)) { + if (KeyValid) { + if (Register == REG_MAC_STA_ADDR) + Addr[0] = Control; + else if (Register == (REG_MAC_STA_ADDR + 4)) + Addr[1] = Control; + KeyValid = false; + } else if ((Control & 0xff) == 0x5A) { + KeyValid = true; + Register = (u16) (Control >> 16); + } else { + break; /* data end */ + } + } else { + break; /* read error */ + } + i += 4; + } + + *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]); + *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]); + if (is_valid_ether_addr(EthAddr)) { + memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN); + return 0; + } + /* maybe MAC-address is from BIOS */ + Addr[0] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR); + Addr[1] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR + 4); + *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]); + *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]); + + if (is_valid_ether_addr(EthAddr)) { + memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN); + return 0; + } + + return 1; +} + +/* + * Reads the adapter's MAC address from the EEPROM + * + * hw - Struct containing variables accessed by shared code + */ +static s32 atl2_read_mac_addr(struct atl2_hw *hw) +{ + if (get_permanent_address(hw)) { + /* for test */ + /* FIXME: shouldn't we use eth_random_addr() here? */ + hw->perm_mac_addr[0] = 0x00; + hw->perm_mac_addr[1] = 0x13; + hw->perm_mac_addr[2] = 0x74; + hw->perm_mac_addr[3] = 0x00; + hw->perm_mac_addr[4] = 0x5c; + hw->perm_mac_addr[5] = 0x38; + } + + memcpy(hw->mac_addr, hw->perm_mac_addr, ETH_ALEN); + + return 0; +} + +/* + * Hashes an address to determine its location in the multicast table + * + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash + * + * atl2_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr) +{ + u32 crc32, value; + int i; + + value = 0; + crc32 = ether_crc_le(6, mc_addr); + + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + + mta = ATL2_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); + + mta |= (1 << hash_bit); + + ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); +} + +/* + * atl2_init_pcie - init PCIE module + */ +static void atl2_init_pcie(struct atl2_hw *hw) +{ + u32 value; + value = LTSSM_TEST_MODE_DEF; + ATL2_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value); + + value = PCIE_DLL_TX_CTRL1_DEF; + ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, value); +} + +static void atl2_init_flash_opcode(struct atl2_hw *hw) +{ + if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) + hw->flash_vendor = 0; /* ATMEL */ + + /* Init OP table */ + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_PROGRAM, + flash_table[hw->flash_vendor].cmdPROGRAM); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_SC_ERASE, + flash_table[hw->flash_vendor].cmdSECTOR_ERASE); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_CHIP_ERASE, + flash_table[hw->flash_vendor].cmdCHIP_ERASE); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDID, + flash_table[hw->flash_vendor].cmdRDID); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WREN, + flash_table[hw->flash_vendor].cmdWREN); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDSR, + flash_table[hw->flash_vendor].cmdRDSR); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WRSR, + flash_table[hw->flash_vendor].cmdWRSR); + ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_READ, + flash_table[hw->flash_vendor].cmdREAD); +} + +/******************************************************************** +* Performs basic configuration of the adapter. +* +* hw - Struct containing variables accessed by shared code +* Assumes that the controller has previously been reset and is in a +* post-reset uninitialized state. Initializes multicast table, +* and Calls routines to setup link +* Leaves the transmit and receive units disabled and uninitialized. +********************************************************************/ +static s32 atl2_init_hw(struct atl2_hw *hw) +{ + u32 ret_val = 0; + + atl2_init_pcie(hw); + + /* Zero out the Multicast HASH table */ + /* clear the old settings from the multicast hash table */ + ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); + ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); + + atl2_init_flash_opcode(hw); + + ret_val = atl2_phy_init(hw); + + return ret_val; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + u16 phy_data; + + /* Read PHY Specific Status Register (17) */ + ret_val = atl2_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) + return ATLX_ERR_PHY_RES; + + switch (phy_data & MII_ATLX_PSSR_SPEED) { + case MII_ATLX_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_ATLX_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + return ATLX_ERR_PHY_SPEED; + } + + if (phy_data & MII_ATLX_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | + MDIO_SUP_PREAMBLE | + MDIO_RW | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val); + + wmb(); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ATL2_READ_REG(hw, REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + wmb(); + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16)val; + return 0; + } + + return ATLX_ERR_PHY; +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val); + + wmb(); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ATL2_READ_REG(hw, REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + + wmb(); + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return ATLX_ERR_PHY; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * + * hw - Struct containing variables accessed by shared code + */ +static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw) +{ + s32 ret_val; + s16 mii_autoneg_adv_reg; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; + + /* Need to parse autoneg_advertised and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + + /* Need to parse MediaType and setup the + * appropriate PHY registers. */ + switch (hw->MediaType) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= + (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS| + MII_AR_100TX_FD_CAPS); + hw->autoneg_advertised = + ADVERTISE_10_HALF | + ADVERTISE_10_FULL | + ADVERTISE_100_HALF| + ADVERTISE_100_FULL; + break; + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + hw->autoneg_advertised = ADVERTISE_100_FULL; + break; + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + hw->autoneg_advertised = ADVERTISE_100_HALF; + break; + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + hw->autoneg_advertised = ADVERTISE_10_FULL; + break; + default: + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + hw->autoneg_advertised = ADVERTISE_10_HALF; + break; + } + + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + + ret_val = atl2_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + + if (ret_val) + return ret_val; + + return 0; +} + +/* + * Resets the PHY and make all config validate + * + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + */ +static s32 atl2_phy_commit(struct atl2_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG; + ret_val = atl2_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /* pcie serdes link may be down ! */ + for (i = 0; i < 25; i++) { + msleep(1); + val = ATL2_READ_REG(hw, REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (0 != (val & (MDIO_START | MDIO_BUSY))) { + printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n"); + return ret_val; + } + } + return 0; +} + +static s32 atl2_phy_init(struct atl2_hw *hw) +{ + s32 ret_val; + u16 phy_val; + + if (hw->phy_configured) + return 0; + + /* Enable PHY */ + ATL2_WRITE_REGW(hw, REG_PHY_ENABLE, 1); + ATL2_WRITE_FLUSH(hw); + msleep(1); + + /* check if the PHY is in powersaving mode */ + atl2_write_phy_reg(hw, MII_DBG_ADDR, 0); + atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val); + + /* 024E / 124E 0r 0274 / 1274 ? */ + if (phy_val & 0x1000) { + phy_val &= ~0x1000; + atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val); + } + + msleep(1); + + /*Enable PHY LinkChange Interrupt */ + ret_val = atl2_write_phy_reg(hw, 18, 0xC00); + if (ret_val) + return ret_val; + + /* setup AutoNeg parameters */ + ret_val = atl2_phy_setup_autoneg_adv(hw); + if (ret_val) + return ret_val; + + /* SW.Reset & En-Auto-Neg to restart Auto-Neg */ + ret_val = atl2_phy_commit(hw); + if (ret_val) + return ret_val; + + hw->phy_configured = true; + + return ret_val; +} + +static void atl2_set_mac_addr(struct atl2_hw *hw) +{ + u32 value; + /* 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword */ + value = (((u32)hw->mac_addr[2]) << 24) | + (((u32)hw->mac_addr[3]) << 16) | + (((u32)hw->mac_addr[4]) << 8) | + (((u32)hw->mac_addr[5])); + ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); + /* hight dword */ + value = (((u32)hw->mac_addr[0]) << 8) | + (((u32)hw->mac_addr[1])); + ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); +} + +/* + * check_eeprom_exist + * return 0 if eeprom exist + */ +static int atl2_check_eeprom_exist(struct atl2_hw *hw) +{ + u32 value; + + value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value); + } + value = ATL2_READ_REGW(hw, REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; +} + +/* FIXME: This doesn't look right. -- CHS */ +static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value) +{ + return true; +} + +static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue) +{ + int i; + u32 Control; + + if (Offset & 0x3) + return false; /* address do not align */ + + ATL2_WRITE_REG(hw, REG_VPD_DATA, 0); + Control = (Offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + ATL2_WRITE_REG(hw, REG_VPD_CAP, Control); + + for (i = 0; i < 10; i++) { + msleep(2); + Control = ATL2_READ_REG(hw, REG_VPD_CAP); + if (Control & VPD_CAP_VPD_FLAG) + break; + } + + if (Control & VPD_CAP_VPD_FLAG) { + *pValue = ATL2_READ_REG(hw, REG_VPD_DATA); + return true; + } + return false; /* timeout */ +} + +static void atl2_force_ps(struct atl2_hw *hw) +{ + u16 phy_val; + + atl2_write_phy_reg(hw, MII_DBG_ADDR, 0); + atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val); + atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val | 0x1000); + + atl2_write_phy_reg(hw, MII_DBG_ADDR, 2); + atl2_write_phy_reg(hw, MII_DBG_DATA, 0x3000); + atl2_write_phy_reg(hw, MII_DBG_ADDR, 3); + atl2_write_phy_reg(hw, MII_DBG_DATA, 0); +} + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ +#define ATL2_MAX_NIC 4 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ +#define ATL2_PARAM_INIT {[0 ... ATL2_MAX_NIC] = OPTION_UNSET} +#ifndef module_param_array +/* Module Parameters are always initialized to -1, so that the driver + * can tell the difference between no user specified value or the + * user asking for the default value. + * The true default values are loaded in when atl2_check_options is called. + * + * This is a GCC extension to ANSI C. + * See the item "Labeled Elements in Initializers" in the section + * "Extensions to the C Language Family" of the GCC documentation. + */ + +#define ATL2_PARAM(X, desc) \ + static const int X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \ + MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \ + MODULE_PARM_DESC(X, desc); +#else +#define ATL2_PARAM(X, desc) \ + static int X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \ + static unsigned int num_##X; \ + module_param_array_named(X, X, int, &num_##X, 0); \ + MODULE_PARM_DESC(X, desc); +#endif + +/* + * Transmit Memory Size + * Valid Range: 64-2048 + * Default Value: 128 + */ +#define ATL2_MIN_TX_MEMSIZE 4 /* 4KB */ +#define ATL2_MAX_TX_MEMSIZE 64 /* 64KB */ +#define ATL2_DEFAULT_TX_MEMSIZE 8 /* 8KB */ +ATL2_PARAM(TxMemSize, "Bytes of Transmit Memory"); + +/* + * Receive Memory Block Count + * Valid Range: 16-512 + * Default Value: 128 + */ +#define ATL2_MIN_RXD_COUNT 16 +#define ATL2_MAX_RXD_COUNT 512 +#define ATL2_DEFAULT_RXD_COUNT 64 +ATL2_PARAM(RxMemBlock, "Number of receive memory block"); + +/* + * User Specified MediaType Override + * + * Valid Range: 0-5 + * - 0 - auto-negotiate at all supported speeds + * - 1 - only link at 1000Mbps Full Duplex + * - 2 - only link at 100Mbps Full Duplex + * - 3 - only link at 100Mbps Half Duplex + * - 4 - only link at 10Mbps Full Duplex + * - 5 - only link at 10Mbps Half Duplex + * Default Value: 0 + */ +ATL2_PARAM(MediaType, "MediaType Select"); + +/* + * Interrupt Moderate Timer in units of 2048 ns (~2 us) + * Valid Range: 10-65535 + * Default Value: 45000(90ms) + */ +#define INT_MOD_DEFAULT_CNT 100 /* 200us */ +#define INT_MOD_MAX_CNT 65000 +#define INT_MOD_MIN_CNT 50 +ATL2_PARAM(IntModTimer, "Interrupt Moderator Timer"); + +/* + * FlashVendor + * Valid Range: 0-2 + * 0 - Atmel + * 1 - SST + * 2 - ST + */ +ATL2_PARAM(FlashVendor, "SPI Flash Vendor"); + +#define AUTONEG_ADV_DEFAULT 0x2F +#define AUTONEG_ADV_MASK 0x2F +#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL + +#define FLASH_VENDOR_DEFAULT 0 +#define FLASH_VENDOR_MIN 0 +#define FLASH_VENDOR_MAX 2 + +struct atl2_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct atl2_opt_list { int i; char *str; } *p; + } l; + } arg; +}; + +static int atl2_validate_option(int *value, struct atl2_option *opt) +{ + int i; + struct atl2_opt_list *ent; + + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + printk(KERN_INFO "%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + printk(KERN_INFO "%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + printk(KERN_INFO "%s set to %i\n", opt->name, *value); + return 0; + } + break; + case list_option: + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + printk(KERN_INFO "%s\n", ent->str); + return 0; + } + } + break; + default: + BUG(); + } + + printk(KERN_INFO "Invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * atl2_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + */ +static void atl2_check_options(struct atl2_adapter *adapter) +{ + int val; + struct atl2_option opt; + int bd = adapter->bd_number; + if (bd >= ATL2_MAX_NIC) { + printk(KERN_NOTICE "Warning: no configuration for board #%i\n", + bd); + printk(KERN_NOTICE "Using defaults for all values\n"); +#ifndef module_param_array + bd = ATL2_MAX_NIC; +#endif + } + + /* Bytes of Transmit Memory */ + opt.type = range_option; + opt.name = "Bytes of Transmit Memory"; + opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE); + opt.def = ATL2_DEFAULT_TX_MEMSIZE; + opt.arg.r.min = ATL2_MIN_TX_MEMSIZE; + opt.arg.r.max = ATL2_MAX_TX_MEMSIZE; +#ifdef module_param_array + if (num_TxMemSize > bd) { +#endif + val = TxMemSize[bd]; + atl2_validate_option(&val, &opt); + adapter->txd_ring_size = ((u32) val) * 1024; +#ifdef module_param_array + } else + adapter->txd_ring_size = ((u32)opt.def) * 1024; +#endif + /* txs ring size: */ + adapter->txs_ring_size = adapter->txd_ring_size / 128; + if (adapter->txs_ring_size > 160) + adapter->txs_ring_size = 160; + + /* Receive Memory Block Count */ + opt.type = range_option; + opt.name = "Number of receive memory block"; + opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT); + opt.def = ATL2_DEFAULT_RXD_COUNT; + opt.arg.r.min = ATL2_MIN_RXD_COUNT; + opt.arg.r.max = ATL2_MAX_RXD_COUNT; +#ifdef module_param_array + if (num_RxMemBlock > bd) { +#endif + val = RxMemBlock[bd]; + atl2_validate_option(&val, &opt); + adapter->rxd_ring_size = (u32)val; + /* FIXME */ + /* ((u16)val)&~1; */ /* even number */ +#ifdef module_param_array + } else + adapter->rxd_ring_size = (u32)opt.def; +#endif + /* init RXD Flow control value */ + adapter->hw.fc_rxd_hi = (adapter->rxd_ring_size / 8) * 7; + adapter->hw.fc_rxd_lo = (ATL2_MIN_RXD_COUNT / 8) > + (adapter->rxd_ring_size / 12) ? (ATL2_MIN_RXD_COUNT / 8) : + (adapter->rxd_ring_size / 12); + + /* Interrupt Moderate Timer */ + opt.type = range_option; + opt.name = "Interrupt Moderate Timer"; + opt.err = "using default of " __MODULE_STRING(INT_MOD_DEFAULT_CNT); + opt.def = INT_MOD_DEFAULT_CNT; + opt.arg.r.min = INT_MOD_MIN_CNT; + opt.arg.r.max = INT_MOD_MAX_CNT; +#ifdef module_param_array + if (num_IntModTimer > bd) { +#endif + val = IntModTimer[bd]; + atl2_validate_option(&val, &opt); + adapter->imt = (u16) val; +#ifdef module_param_array + } else + adapter->imt = (u16)(opt.def); +#endif + /* Flash Vendor */ + opt.type = range_option; + opt.name = "SPI Flash Vendor"; + opt.err = "using default of " __MODULE_STRING(FLASH_VENDOR_DEFAULT); + opt.def = FLASH_VENDOR_DEFAULT; + opt.arg.r.min = FLASH_VENDOR_MIN; + opt.arg.r.max = FLASH_VENDOR_MAX; +#ifdef module_param_array + if (num_FlashVendor > bd) { +#endif + val = FlashVendor[bd]; + atl2_validate_option(&val, &opt); + adapter->hw.flash_vendor = (u8) val; +#ifdef module_param_array + } else + adapter->hw.flash_vendor = (u8)(opt.def); +#endif + /* MediaType */ + opt.type = range_option; + opt.name = "Speed/Duplex Selection"; + opt.err = "using default of " __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR); + opt.def = MEDIA_TYPE_AUTO_SENSOR; + opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR; + opt.arg.r.max = MEDIA_TYPE_10M_HALF; +#ifdef module_param_array + if (num_MediaType > bd) { +#endif + val = MediaType[bd]; + atl2_validate_option(&val, &opt); + adapter->hw.MediaType = (u16) val; +#ifdef module_param_array + } else + adapter->hw.MediaType = (u16)(opt.def); +#endif +} |