diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x')
26 files changed, 81334 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile new file mode 100644 index 000000000..116762daa --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for Broadcom 10-Gigabit ethernet driver +# + +obj-$(CONFIG_BNX2X) += bnx2x.o + +bnx2x-y := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o +bnx2x-$(CONFIG_BNX2X_SRIOV) += bnx2x_vfpf.o bnx2x_sriov.o diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h new file mode 100644 index 000000000..3db54b664 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -0,0 +1,2533 @@ +/* bnx2x.h: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + */ + +#ifndef BNX2X_H +#define BNX2X_H + +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/dma-mapping.h> +#include <linux/types.h> +#include <linux/pci_regs.h> + +#include <linux/ptp_clock_kernel.h> +#include <linux/net_tstamp.h> +#include <linux/timecounter.h> + +/* compilation time flags */ + +/* define this to make the driver freeze on error to allow getting debug info + * (you will need to reboot afterwards) */ +/* #define BNX2X_STOP_ON_ERROR */ + +#define DRV_MODULE_VERSION "1.712.30-0" +#define DRV_MODULE_RELDATE "2014/02/10" +#define BNX2X_BC_VER 0x040200 + +#if defined(CONFIG_DCB) +#define BCM_DCBNL +#endif + +#include "bnx2x_hsi.h" + +#include "../cnic_if.h" + +#define BNX2X_MIN_MSIX_VEC_CNT(bp) ((bp)->min_msix_vec_cnt) + +#include <linux/mdio.h> + +#include "bnx2x_reg.h" +#include "bnx2x_fw_defs.h" +#include "bnx2x_mfw_req.h" +#include "bnx2x_link.h" +#include "bnx2x_sp.h" +#include "bnx2x_dcb.h" +#include "bnx2x_stats.h" +#include "bnx2x_vfpf.h" + +enum bnx2x_int_mode { + BNX2X_INT_MODE_MSIX, + BNX2X_INT_MODE_INTX, + BNX2X_INT_MODE_MSI +}; + +/* error/debug prints */ + +#define DRV_MODULE_NAME "bnx2x" + +/* for messages that are currently off */ +#define BNX2X_MSG_OFF 0x0 +#define BNX2X_MSG_MCP 0x0010000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_STATS 0x0020000 /* was: NETIF_MSG_TIMER */ +#define BNX2X_MSG_NVM 0x0040000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_DMAE 0x0080000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_SP 0x0100000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_FP 0x0200000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_IOV 0x0800000 +#define BNX2X_MSG_PTP 0x1000000 +#define BNX2X_MSG_IDLE 0x2000000 /* used for idle check*/ +#define BNX2X_MSG_ETHTOOL 0x4000000 +#define BNX2X_MSG_DCB 0x8000000 + +/* regular debug print */ +#define DP_INNER(fmt, ...) \ + pr_notice("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__VA_ARGS__); + +#define DP(__mask, fmt, ...) \ +do { \ + if (unlikely(bp->msg_enable & (__mask))) \ + DP_INNER(fmt, ##__VA_ARGS__); \ +} while (0) + +#define DP_AND(__mask, fmt, ...) \ +do { \ + if (unlikely((bp->msg_enable & (__mask)) == __mask)) \ + DP_INNER(fmt, ##__VA_ARGS__); \ +} while (0) + +#define DP_CONT(__mask, fmt, ...) \ +do { \ + if (unlikely(bp->msg_enable & (__mask))) \ + pr_cont(fmt, ##__VA_ARGS__); \ +} while (0) + +/* errors debug print */ +#define BNX2X_DBG_ERR(fmt, ...) \ +do { \ + if (unlikely(netif_msg_probe(bp))) \ + pr_err("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__VA_ARGS__); \ +} while (0) + +/* for errors (never masked) */ +#define BNX2X_ERR(fmt, ...) \ +do { \ + pr_err("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__VA_ARGS__); \ +} while (0) + +#define BNX2X_ERROR(fmt, ...) \ + pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__) + +/* before we have a dev->name use dev_info() */ +#define BNX2X_DEV_INFO(fmt, ...) \ +do { \ + if (unlikely(netif_msg_probe(bp))) \ + dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__); \ +} while (0) + +/* Error handling */ +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int); +#ifdef BNX2X_STOP_ON_ERROR +#define bnx2x_panic() \ +do { \ + bp->panic = 1; \ + BNX2X_ERR("driver assert\n"); \ + bnx2x_panic_dump(bp, true); \ +} while (0) +#else +#define bnx2x_panic() \ +do { \ + bp->panic = 1; \ + BNX2X_ERR("driver assert\n"); \ + bnx2x_panic_dump(bp, false); \ +} while (0) +#endif + +#define bnx2x_mc_addr(ha) ((ha)->addr) +#define bnx2x_uc_addr(ha) ((ha)->addr) + +#define U64_LO(x) ((u32)(((u64)(x)) & 0xffffffff)) +#define U64_HI(x) ((u32)(((u64)(x)) >> 32)) +#define HILO_U64(hi, lo) ((((u64)(hi)) << 32) + (lo)) + +#define REG_ADDR(bp, offset) ((bp->regview) + (offset)) + +#define REG_RD(bp, offset) readl(REG_ADDR(bp, offset)) +#define REG_RD8(bp, offset) readb(REG_ADDR(bp, offset)) +#define REG_RD16(bp, offset) readw(REG_ADDR(bp, offset)) + +#define REG_WR_RELAXED(bp, offset, val) \ + writel_relaxed((u32)val, REG_ADDR(bp, offset)) + +#define REG_WR16_RELAXED(bp, offset, val) \ + writew_relaxed((u16)val, REG_ADDR(bp, offset)) + +#define REG_WR(bp, offset, val) writel((u32)val, REG_ADDR(bp, offset)) +#define REG_WR8(bp, offset, val) writeb((u8)val, REG_ADDR(bp, offset)) +#define REG_WR16(bp, offset, val) writew((u16)val, REG_ADDR(bp, offset)) + +#define REG_RD_IND(bp, offset) bnx2x_reg_rd_ind(bp, offset) +#define REG_WR_IND(bp, offset, val) bnx2x_reg_wr_ind(bp, offset, val) + +#define REG_RD_DMAE(bp, offset, valp, len32) \ + do { \ + bnx2x_read_dmae(bp, offset, len32);\ + memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \ + } while (0) + +#define REG_WR_DMAE(bp, offset, valp, len32) \ + do { \ + memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \ + bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \ + offset, len32); \ + } while (0) + +#define REG_WR_DMAE_LEN(bp, offset, valp, len32) \ + REG_WR_DMAE(bp, offset, valp, len32) + +#define VIRT_WR_DMAE_LEN(bp, data, addr, len32, le32_swap) \ + do { \ + memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \ + bnx2x_write_big_buf_wb(bp, addr, len32); \ + } while (0) + +#define SHMEM_ADDR(bp, field) (bp->common.shmem_base + \ + offsetof(struct shmem_region, field)) +#define SHMEM_RD(bp, field) REG_RD(bp, SHMEM_ADDR(bp, field)) +#define SHMEM_WR(bp, field, val) REG_WR(bp, SHMEM_ADDR(bp, field), val) + +#define SHMEM2_ADDR(bp, field) (bp->common.shmem2_base + \ + offsetof(struct shmem2_region, field)) +#define SHMEM2_RD(bp, field) REG_RD(bp, SHMEM2_ADDR(bp, field)) +#define SHMEM2_WR(bp, field, val) REG_WR(bp, SHMEM2_ADDR(bp, field), val) +#define MF_CFG_ADDR(bp, field) (bp->common.mf_cfg_base + \ + offsetof(struct mf_cfg, field)) +#define MF2_CFG_ADDR(bp, field) (bp->common.mf2_cfg_base + \ + offsetof(struct mf2_cfg, field)) + +#define MF_CFG_RD(bp, field) REG_RD(bp, MF_CFG_ADDR(bp, field)) +#define MF_CFG_WR(bp, field, val) REG_WR(bp,\ + MF_CFG_ADDR(bp, field), (val)) +#define MF2_CFG_RD(bp, field) REG_RD(bp, MF2_CFG_ADDR(bp, field)) + +#define SHMEM2_HAS(bp, field) ((bp)->common.shmem2_base && \ + (SHMEM2_RD((bp), size) > \ + offsetof(struct shmem2_region, field))) + +#define EMAC_RD(bp, reg) REG_RD(bp, emac_base + reg) +#define EMAC_WR(bp, reg, val) REG_WR(bp, emac_base + reg, val) + +/* SP SB indices */ + +/* General SP events - stats query, cfc delete, etc */ +#define HC_SP_INDEX_ETH_DEF_CONS 3 + +/* EQ completions */ +#define HC_SP_INDEX_EQ_CONS 7 + +/* FCoE L2 connection completions */ +#define HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS 6 +#define HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS 4 +/* iSCSI L2 */ +#define HC_SP_INDEX_ETH_ISCSI_CQ_CONS 5 +#define HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS 1 + +/* Special clients parameters */ + +/* SB indices */ +/* FCoE L2 */ +#define BNX2X_FCOE_L2_RX_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS]) + +#define BNX2X_FCOE_L2_TX_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS]) + +/** + * CIDs and CLIDs: + * CLIDs below is a CLID for func 0, then the CLID for other + * functions will be calculated by the formula: + * + * FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X + * + */ +enum { + BNX2X_ISCSI_ETH_CL_ID_IDX, + BNX2X_FCOE_ETH_CL_ID_IDX, + BNX2X_MAX_CNIC_ETH_CL_ID_IDX, +}; + +/* use a value high enough to be above all the PFs, which has least significant + * nibble as 8, so when cnic needs to come up with a CID for UIO to use to + * calculate doorbell address according to old doorbell configuration scheme + * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number + * We must avoid coming up with cid 8 for iscsi since according to this method + * the designated UIO cid will come out 0 and it has a special handling for that + * case which doesn't suit us. Therefore will will cieling to closes cid which + * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18. + */ + +#define BNX2X_1st_NON_L2_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * \ + (bp)->max_cos) +/* amount of cids traversed by UIO's DPM addition to doorbell */ +#define UIO_DPM 8 +/* roundup to DPM offset */ +#define UIO_ROUNDUP(bp) (roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \ + UIO_DPM)) +/* offset to nearest value which has lsb nibble matching DPM */ +#define UIO_CID_OFFSET(bp) ((UIO_ROUNDUP(bp) + UIO_DPM) % \ + (UIO_DPM * 2)) +/* add offset to rounded-up cid to get a value which could be used with UIO */ +#define UIO_DPM_ALIGN(bp) (UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp)) +/* but wait - avoid UIO special case for cid 0 */ +#define UIO_DPM_CID0_OFFSET(bp) ((UIO_DPM * 2) * \ + (UIO_DPM_ALIGN(bp) == UIO_DPM)) +/* Properly DPM aligned CID dajusted to cid 0 secal case */ +#define BNX2X_CNIC_START_ETH_CID(bp) (UIO_DPM_ALIGN(bp) + \ + (UIO_DPM_CID0_OFFSET(bp))) +/* how many cids were wasted - need this value for cid allocation */ +#define UIO_CID_PAD(bp) (BNX2X_CNIC_START_ETH_CID(bp) - \ + BNX2X_1st_NON_L2_ETH_CID(bp)) + /* iSCSI L2 */ +#define BNX2X_ISCSI_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp)) + /* FCoE L2 */ +#define BNX2X_FCOE_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp) + 1) + +#define CNIC_SUPPORT(bp) ((bp)->cnic_support) +#define CNIC_ENABLED(bp) ((bp)->cnic_enabled) +#define CNIC_LOADED(bp) ((bp)->cnic_loaded) +#define FCOE_INIT(bp) ((bp)->fcoe_init) + +#define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \ + AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR + +#define SM_RX_ID 0 +#define SM_TX_ID 1 + +/* defines for multiple tx priority indices */ +#define FIRST_TX_ONLY_COS_INDEX 1 +#define FIRST_TX_COS_INDEX 0 + +/* rules for calculating the cids of tx-only connections */ +#define CID_TO_FP(cid, bp) ((cid) % BNX2X_NUM_NON_CNIC_QUEUES(bp)) +#define CID_COS_TO_TX_ONLY_CID(cid, cos, bp) \ + (cid + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp)) + +/* fp index inside class of service range */ +#define FP_COS_TO_TXQ(fp, cos, bp) \ + ((fp)->index + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp)) + +/* Indexes for transmission queues array: + * txdata for RSS i CoS j is at location i + (j * num of RSS) + * txdata for FCoE (if exist) is at location max cos * num of RSS + * txdata for FWD (if exist) is one location after FCoE + * txdata for OOO (if exist) is one location after FWD + */ +enum { + FCOE_TXQ_IDX_OFFSET, + FWD_TXQ_IDX_OFFSET, + OOO_TXQ_IDX_OFFSET, +}; +#define MAX_ETH_TXQ_IDX(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * (bp)->max_cos) +#define FCOE_TXQ_IDX(bp) (MAX_ETH_TXQ_IDX(bp) + FCOE_TXQ_IDX_OFFSET) + +/* fast path */ +/* + * This driver uses new build_skb() API : + * RX ring buffer contains pointer to kmalloc() data only, + * skb are built only after Hardware filled the frame. + */ +struct sw_rx_bd { + u8 *data; + DEFINE_DMA_UNMAP_ADDR(mapping); +}; + +struct sw_tx_bd { + struct sk_buff *skb; + u16 first_bd; + u8 flags; +/* Set on the first BD descriptor when there is a split BD */ +#define BNX2X_TSO_SPLIT_BD (1<<0) +#define BNX2X_HAS_SECOND_PBD (1<<1) +}; + +struct sw_rx_page { + struct page *page; + DEFINE_DMA_UNMAP_ADDR(mapping); + unsigned int offset; +}; + +union db_prod { + struct doorbell_set_prod data; + u32 raw; +}; + +/* dropless fc FW/HW related params */ +#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512) +#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \ + ETH_MAX_AGGREGATION_QUEUES_E1 :\ + ETH_MAX_AGGREGATION_QUEUES_E1H_E2) +#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp)) +#define FW_PREFETCH_CNT 16 +#define DROPLESS_FC_HEADROOM 100 + +/* MC hsi */ +#define BCM_PAGE_SHIFT 12 +#define BCM_PAGE_SIZE (1 << BCM_PAGE_SHIFT) +#define BCM_PAGE_MASK (~(BCM_PAGE_SIZE - 1)) +#define BCM_PAGE_ALIGN(addr) (((addr) + BCM_PAGE_SIZE - 1) & BCM_PAGE_MASK) + +#define PAGES_PER_SGE_SHIFT 0 +#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT) +#define SGE_PAGE_SHIFT 12 +#define SGE_PAGE_SIZE (1 << SGE_PAGE_SHIFT) +#define SGE_PAGE_MASK (~(SGE_PAGE_SIZE - 1)) +#define SGE_PAGE_ALIGN(addr) (((addr) + SGE_PAGE_SIZE - 1) & SGE_PAGE_MASK) +#define SGE_PAGES (SGE_PAGE_SIZE * PAGES_PER_SGE) +#define TPA_AGG_SIZE min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \ + SGE_PAGES), 0xffff) + +/* SGE ring related macros */ +#define NUM_RX_SGE_PAGES 2 +#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) +#define NEXT_PAGE_SGE_DESC_CNT 2 +#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT) +/* RX_SGE_CNT is promised to be a power of 2 */ +#define RX_SGE_MASK (RX_SGE_CNT - 1) +#define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES) +#define MAX_RX_SGE (NUM_RX_SGE - 1) +#define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \ + (MAX_RX_SGE_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \ + (x) + 1) +#define RX_SGE(x) ((x) & MAX_RX_SGE) + +/* + * Number of required SGEs is the sum of two: + * 1. Number of possible opened aggregations (next packet for + * these aggregations will probably consume SGE immediately) + * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only + * after placement on BD for new TPA aggregation) + * + * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page + */ +#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \ + (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2) +#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \ + MAX_RX_SGE_CNT) +#define SGE_TH_LO(bp) (NUM_SGE_REQ + \ + NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT) +#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +/* Manipulate a bit vector defined as an array of u64 */ + +/* Number of bits in one sge_mask array element */ +#define BIT_VEC64_ELEM_SZ 64 +#define BIT_VEC64_ELEM_SHIFT 6 +#define BIT_VEC64_ELEM_MASK ((u64)BIT_VEC64_ELEM_SZ - 1) + +#define __BIT_VEC64_SET_BIT(el, bit) \ + do { \ + el = ((el) | ((u64)0x1 << (bit))); \ + } while (0) + +#define __BIT_VEC64_CLEAR_BIT(el, bit) \ + do { \ + el = ((el) & (~((u64)0x1 << (bit)))); \ + } while (0) + +#define BIT_VEC64_SET_BIT(vec64, idx) \ + __BIT_VEC64_SET_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \ + (idx) & BIT_VEC64_ELEM_MASK) + +#define BIT_VEC64_CLEAR_BIT(vec64, idx) \ + __BIT_VEC64_CLEAR_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \ + (idx) & BIT_VEC64_ELEM_MASK) + +#define BIT_VEC64_TEST_BIT(vec64, idx) \ + (((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT] >> \ + ((idx) & BIT_VEC64_ELEM_MASK)) & 0x1) + +/* Creates a bitmask of all ones in less significant bits. + idx - index of the most significant bit in the created mask */ +#define BIT_VEC64_ONES_MASK(idx) \ + (((u64)0x1 << (((idx) & BIT_VEC64_ELEM_MASK) + 1)) - 1) +#define BIT_VEC64_ELEM_ONE_MASK ((u64)(~0)) + +/*******************************************************/ + +/* Number of u64 elements in SGE mask array */ +#define RX_SGE_MASK_LEN (NUM_RX_SGE / BIT_VEC64_ELEM_SZ) +#define RX_SGE_MASK_LEN_MASK (RX_SGE_MASK_LEN - 1) +#define NEXT_SGE_MASK_ELEM(el) (((el) + 1) & RX_SGE_MASK_LEN_MASK) + +union host_hc_status_block { + /* pointer to fp status block e1x */ + struct host_hc_status_block_e1x *e1x_sb; + /* pointer to fp status block e2 */ + struct host_hc_status_block_e2 *e2_sb; +}; + +struct bnx2x_agg_info { + /* + * First aggregation buffer is a data buffer, the following - are pages. + * We will preallocate the data buffer for each aggregation when + * we open the interface and will replace the BD at the consumer + * with this one when we receive the TPA_START CQE in order to + * keep the Rx BD ring consistent. + */ + struct sw_rx_bd first_buf; + u8 tpa_state; +#define BNX2X_TPA_START 1 +#define BNX2X_TPA_STOP 2 +#define BNX2X_TPA_ERROR 3 + u8 placement_offset; + u16 parsing_flags; + u16 vlan_tag; + u16 len_on_bd; + u32 rxhash; + enum pkt_hash_types rxhash_type; + u16 gro_size; + u16 full_page; +}; + +#define Q_STATS_OFFSET32(stat_name) \ + (offsetof(struct bnx2x_eth_q_stats, stat_name) / 4) + +struct bnx2x_fp_txdata { + + struct sw_tx_bd *tx_buf_ring; + + union eth_tx_bd_types *tx_desc_ring; + dma_addr_t tx_desc_mapping; + + u32 cid; + + union db_prod tx_db; + + u16 tx_pkt_prod; + u16 tx_pkt_cons; + u16 tx_bd_prod; + u16 tx_bd_cons; + + unsigned long tx_pkt; + + __le16 *tx_cons_sb; + + int txq_index; + struct bnx2x_fastpath *parent_fp; + int tx_ring_size; +}; + +enum bnx2x_tpa_mode_t { + TPA_MODE_DISABLED, + TPA_MODE_LRO, + TPA_MODE_GRO +}; + +struct bnx2x_alloc_pool { + struct page *page; + unsigned int offset; +}; + +struct bnx2x_fastpath { + struct bnx2x *bp; /* parent */ + + struct napi_struct napi; + + union host_hc_status_block status_blk; + /* chip independent shortcuts into sb structure */ + __le16 *sb_index_values; + __le16 *sb_running_index; + /* chip independent shortcut into rx_prods_offset memory */ + u32 ustorm_rx_prods_offset; + + u32 rx_buf_size; + u32 rx_frag_size; /* 0 if kmalloced(), or rx_buf_size + NET_SKB_PAD */ + dma_addr_t status_blk_mapping; + + enum bnx2x_tpa_mode_t mode; + + u8 max_cos; /* actual number of active tx coses */ + struct bnx2x_fp_txdata *txdata_ptr[BNX2X_MULTI_TX_COS]; + + struct sw_rx_bd *rx_buf_ring; /* BDs mappings ring */ + struct sw_rx_page *rx_page_ring; /* SGE pages mappings ring */ + + struct eth_rx_bd *rx_desc_ring; + dma_addr_t rx_desc_mapping; + + union eth_rx_cqe *rx_comp_ring; + dma_addr_t rx_comp_mapping; + + /* SGE ring */ + struct eth_rx_sge *rx_sge_ring; + dma_addr_t rx_sge_mapping; + + u64 sge_mask[RX_SGE_MASK_LEN]; + + u32 cid; + + __le16 fp_hc_idx; + + u8 index; /* number in fp array */ + u8 rx_queue; /* index for skb_record */ + u8 cl_id; /* eth client id */ + u8 cl_qzone_id; + u8 fw_sb_id; /* status block number in FW */ + u8 igu_sb_id; /* status block number in HW */ + + u16 rx_bd_prod; + u16 rx_bd_cons; + u16 rx_comp_prod; + u16 rx_comp_cons; + u16 rx_sge_prod; + /* The last maximal completed SGE */ + u16 last_max_sge; + __le16 *rx_cons_sb; + + /* TPA related */ + struct bnx2x_agg_info *tpa_info; +#ifdef BNX2X_STOP_ON_ERROR + u64 tpa_queue_used; +#endif + /* The size is calculated using the following: + sizeof name field from netdev structure + + 4 ('-Xx-' string) + + 4 (for the digits and to make it DWORD aligned) */ +#define FP_NAME_SIZE (sizeof(((struct net_device *)0)->name) + 8) + char name[FP_NAME_SIZE]; + + struct bnx2x_alloc_pool page_pool; +}; + +#define bnx2x_fp(bp, nr, var) ((bp)->fp[(nr)].var) +#define bnx2x_sp_obj(bp, fp) ((bp)->sp_objs[(fp)->index]) +#define bnx2x_fp_stats(bp, fp) (&((bp)->fp_stats[(fp)->index])) +#define bnx2x_fp_qstats(bp, fp) (&((bp)->fp_stats[(fp)->index].eth_q_stats)) + +/* Use 2500 as a mini-jumbo MTU for FCoE */ +#define BNX2X_FCOE_MINI_JUMBO_MTU 2500 + +#define FCOE_IDX_OFFSET 0 + +#define FCOE_IDX(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) + \ + FCOE_IDX_OFFSET) +#define bnx2x_fcoe_fp(bp) (&bp->fp[FCOE_IDX(bp)]) +#define bnx2x_fcoe(bp, var) (bnx2x_fcoe_fp(bp)->var) +#define bnx2x_fcoe_inner_sp_obj(bp) (&bp->sp_objs[FCOE_IDX(bp)]) +#define bnx2x_fcoe_sp_obj(bp, var) (bnx2x_fcoe_inner_sp_obj(bp)->var) +#define bnx2x_fcoe_tx(bp, var) (bnx2x_fcoe_fp(bp)-> \ + txdata_ptr[FIRST_TX_COS_INDEX] \ + ->var) + +#define IS_ETH_FP(fp) ((fp)->index < BNX2X_NUM_ETH_QUEUES((fp)->bp)) +#define IS_FCOE_FP(fp) ((fp)->index == FCOE_IDX((fp)->bp)) +#define IS_FCOE_IDX(idx) ((idx) == FCOE_IDX(bp)) + +/* MC hsi */ +#define MAX_FETCH_BD 13 /* HW max BDs per packet */ +#define RX_COPY_THRESH 92 + +#define NUM_TX_RINGS 16 +#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types)) +#define NEXT_PAGE_TX_DESC_CNT 1 +#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT) +#define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS) +#define MAX_TX_BD (NUM_TX_BD - 1) +#define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2) +#define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \ + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \ + (x) + 1) +#define TX_BD(x) ((x) & MAX_TX_BD) +#define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT) + +/* number of NEXT_PAGE descriptors may be required during placement */ +#define NEXT_CNT_PER_TX_PKT(bds) \ + (((bds) + MAX_TX_DESC_CNT - 1) / \ + MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT) +/* max BDs per tx packet w/o next_pages: + * START_BD - describes packed + * START_BD(splitted) - includes unpaged data segment for GSO + * PARSING_BD - for TSO and CSUM data + * PARSING_BD2 - for encapsulation data + * Frag BDs - describes pages for frags + */ +#define BDS_PER_TX_PKT 4 +#define MAX_BDS_PER_TX_PKT (MAX_SKB_FRAGS + BDS_PER_TX_PKT) +/* max BDs per tx packet including next pages */ +#define MAX_DESC_PER_TX_PKT (MAX_BDS_PER_TX_PKT + \ + NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT)) + +/* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */ +#define NUM_RX_RINGS 8 +#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd)) +#define NEXT_PAGE_RX_DESC_CNT 2 +#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT) +#define RX_DESC_MASK (RX_DESC_CNT - 1) +#define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS) +#define MAX_RX_BD (NUM_RX_BD - 1) +#define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2) + +/* dropless fc calculations for BDs + * + * Number of BDs should as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT + * "next" elements on each page + */ +#define NUM_BD_REQ BRB_SIZE(bp) +#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \ + MAX_RX_DESC_CNT) +#define BD_TH_LO(bp) (NUM_BD_REQ + \ + NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128) + +#define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \ + ETH_MIN_RX_CQES_WITH_TPA_E1 : \ + ETH_MIN_RX_CQES_WITH_TPA_E1H_E2) +#define MIN_RX_SIZE_NONTPA_HW ETH_MIN_RX_CQES_WITHOUT_TPA +#define MIN_RX_SIZE_TPA (max_t(u32, MIN_RX_SIZE_TPA_HW, MIN_RX_AVAIL)) +#define MIN_RX_SIZE_NONTPA (max_t(u32, MIN_RX_SIZE_NONTPA_HW,\ + MIN_RX_AVAIL)) + +#define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \ + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \ + (x) + 1) +#define RX_BD(x) ((x) & MAX_RX_BD) + +/* + * As long as CQE is X times bigger than BD entry we have to allocate X times + * more pages for CQ ring in order to keep it balanced with BD ring + */ +#define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd)) +#define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL) +#define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe)) +#define NEXT_PAGE_RCQ_DESC_CNT 1 +#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT) +#define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS) +#define MAX_RCQ_BD (NUM_RCQ_BD - 1) +#define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2) +#define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \ + (MAX_RCQ_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \ + (x) + 1) +#define RCQ_BD(x) ((x) & MAX_RCQ_BD) + +/* dropless fc calculations for RCQs + * + * Number of RCQs should be as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT + * "next" elements on each page + */ +#define NUM_RCQ_REQ BRB_SIZE(bp) +#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \ + MAX_RCQ_DESC_CNT) +#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \ + NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +/* This is needed for determining of last_max */ +#define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b)) +#define SUB_S32(a, b) (s32)((s32)(a) - (s32)(b)) + +#define BNX2X_SWCID_SHIFT 17 +#define BNX2X_SWCID_MASK ((0x1 << BNX2X_SWCID_SHIFT) - 1) + +/* used on a CID received from the HW */ +#define SW_CID(x) (le32_to_cpu(x) & BNX2X_SWCID_MASK) +#define CQE_CMD(x) (le32_to_cpu(x) >> \ + COMMON_RAMROD_ETH_RX_CQE_CMD_ID_SHIFT) + +#define BD_UNMAP_ADDR(bd) HILO_U64(le32_to_cpu((bd)->addr_hi), \ + le32_to_cpu((bd)->addr_lo)) +#define BD_UNMAP_LEN(bd) (le16_to_cpu((bd)->nbytes)) + +#define BNX2X_DB_MIN_SHIFT 3 /* 8 bytes */ +#define BNX2X_DB_SHIFT 3 /* 8 bytes*/ +#if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT) +#error "Min DB doorbell stride is 8" +#endif +#define DOORBELL_RELAXED(bp, cid, val) \ + writel_relaxed((u32)(val), (bp)->doorbells + ((bp)->db_size * (cid))) + +/* TX CSUM helpers */ +#define SKB_CS_OFF(skb) (offsetof(struct tcphdr, check) - \ + skb->csum_offset) +#define SKB_CS(skb) (*(u16 *)(skb_transport_header(skb) + \ + skb->csum_offset)) + +#define pbd_tcp_flags(tcp_hdr) (ntohl(tcp_flag_word(tcp_hdr))>>16 & 0xff) + +#define XMIT_PLAIN 0 +#define XMIT_CSUM_V4 (1 << 0) +#define XMIT_CSUM_V6 (1 << 1) +#define XMIT_CSUM_TCP (1 << 2) +#define XMIT_GSO_V4 (1 << 3) +#define XMIT_GSO_V6 (1 << 4) +#define XMIT_CSUM_ENC_V4 (1 << 5) +#define XMIT_CSUM_ENC_V6 (1 << 6) +#define XMIT_GSO_ENC_V4 (1 << 7) +#define XMIT_GSO_ENC_V6 (1 << 8) + +#define XMIT_CSUM_ENC (XMIT_CSUM_ENC_V4 | XMIT_CSUM_ENC_V6) +#define XMIT_GSO_ENC (XMIT_GSO_ENC_V4 | XMIT_GSO_ENC_V6) + +#define XMIT_CSUM (XMIT_CSUM_V4 | XMIT_CSUM_V6 | XMIT_CSUM_ENC) +#define XMIT_GSO (XMIT_GSO_V4 | XMIT_GSO_V6 | XMIT_GSO_ENC) + +/* stuff added to make the code fit 80Col */ +#define CQE_TYPE(cqe_fp_flags) ((cqe_fp_flags) & ETH_FAST_PATH_RX_CQE_TYPE) +#define CQE_TYPE_START(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_START_AGG) +#define CQE_TYPE_STOP(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_STOP_AGG) +#define CQE_TYPE_SLOW(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_RAMROD) +#define CQE_TYPE_FAST(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_FASTPATH) + +#define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG + +#define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \ + (((le16_to_cpu(flags) & \ + PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \ + PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT) \ + == PRS_FLAG_OVERETH_IPV4) +#define BNX2X_RX_SUM_FIX(cqe) \ + BNX2X_PRS_FLAG_OVERETH_IPV4(cqe->fast_path_cqe.pars_flags.flags) + +#define FP_USB_FUNC_OFF \ + offsetof(struct cstorm_status_block_u, func) +#define FP_CSB_FUNC_OFF \ + offsetof(struct cstorm_status_block_c, func) + +#define HC_INDEX_ETH_RX_CQ_CONS 1 + +#define HC_INDEX_OOO_TX_CQ_CONS 4 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 + +#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0 + +#define BNX2X_RX_SB_INDEX \ + (&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS]) + +#define BNX2X_TX_SB_INDEX_BASE BNX2X_TX_SB_INDEX_COS0 + +#define BNX2X_TX_SB_INDEX_COS0 \ + (&fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0]) + +/* end of fast path */ + +/* common */ + +struct bnx2x_common { + + u32 chip_id; +/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ +#define CHIP_ID(bp) (bp->common.chip_id & 0xfffffff0) + +#define CHIP_NUM(bp) (bp->common.chip_id >> 16) +#define CHIP_NUM_57710 0x164e +#define CHIP_NUM_57711 0x164f +#define CHIP_NUM_57711E 0x1650 +#define CHIP_NUM_57712 0x1662 +#define CHIP_NUM_57712_MF 0x1663 +#define CHIP_NUM_57712_VF 0x166f +#define CHIP_NUM_57713 0x1651 +#define CHIP_NUM_57713E 0x1652 +#define CHIP_NUM_57800 0x168a +#define CHIP_NUM_57800_MF 0x16a5 +#define CHIP_NUM_57800_VF 0x16a9 +#define CHIP_NUM_57810 0x168e +#define CHIP_NUM_57810_MF 0x16ae +#define CHIP_NUM_57810_VF 0x16af +#define CHIP_NUM_57811 0x163d +#define CHIP_NUM_57811_MF 0x163e +#define CHIP_NUM_57811_VF 0x163f +#define CHIP_NUM_57840_OBSOLETE 0x168d +#define CHIP_NUM_57840_MF_OBSOLETE 0x16ab +#define CHIP_NUM_57840_4_10 0x16a1 +#define CHIP_NUM_57840_2_20 0x16a2 +#define CHIP_NUM_57840_MF 0x16a4 +#define CHIP_NUM_57840_VF 0x16ad +#define CHIP_IS_E1(bp) (CHIP_NUM(bp) == CHIP_NUM_57710) +#define CHIP_IS_57711(bp) (CHIP_NUM(bp) == CHIP_NUM_57711) +#define CHIP_IS_57711E(bp) (CHIP_NUM(bp) == CHIP_NUM_57711E) +#define CHIP_IS_57712(bp) (CHIP_NUM(bp) == CHIP_NUM_57712) +#define CHIP_IS_57712_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_VF) +#define CHIP_IS_57712_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_MF) +#define CHIP_IS_57800(bp) (CHIP_NUM(bp) == CHIP_NUM_57800) +#define CHIP_IS_57800_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_MF) +#define CHIP_IS_57800_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_VF) +#define CHIP_IS_57810(bp) (CHIP_NUM(bp) == CHIP_NUM_57810) +#define CHIP_IS_57810_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_MF) +#define CHIP_IS_57810_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_VF) +#define CHIP_IS_57811(bp) (CHIP_NUM(bp) == CHIP_NUM_57811) +#define CHIP_IS_57811_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_MF) +#define CHIP_IS_57811_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_VF) +#define CHIP_IS_57840(bp) \ + ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || \ + (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || \ + (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) +#define CHIP_IS_57840_MF(bp) ((CHIP_NUM(bp) == CHIP_NUM_57840_MF) || \ + (CHIP_NUM(bp) == CHIP_NUM_57840_MF_OBSOLETE)) +#define CHIP_IS_57840_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57840_VF) +#define CHIP_IS_E1H(bp) (CHIP_IS_57711(bp) || \ + CHIP_IS_57711E(bp)) +#define CHIP_IS_57811xx(bp) (CHIP_IS_57811(bp) || \ + CHIP_IS_57811_MF(bp) || \ + CHIP_IS_57811_VF(bp)) +#define CHIP_IS_E2(bp) (CHIP_IS_57712(bp) || \ + CHIP_IS_57712_MF(bp) || \ + CHIP_IS_57712_VF(bp)) +#define CHIP_IS_E3(bp) (CHIP_IS_57800(bp) || \ + CHIP_IS_57800_MF(bp) || \ + CHIP_IS_57800_VF(bp) || \ + CHIP_IS_57810(bp) || \ + CHIP_IS_57810_MF(bp) || \ + CHIP_IS_57810_VF(bp) || \ + CHIP_IS_57811xx(bp) || \ + CHIP_IS_57840(bp) || \ + CHIP_IS_57840_MF(bp) || \ + CHIP_IS_57840_VF(bp)) +#define CHIP_IS_E1x(bp) (CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp))) +#define USES_WARPCORE(bp) (CHIP_IS_E3(bp)) +#define IS_E1H_OFFSET (!CHIP_IS_E1(bp)) + +#define CHIP_REV_SHIFT 12 +#define CHIP_REV_MASK (0xF << CHIP_REV_SHIFT) +#define CHIP_REV_VAL(bp) (bp->common.chip_id & CHIP_REV_MASK) +#define CHIP_REV_Ax (0x0 << CHIP_REV_SHIFT) +#define CHIP_REV_Bx (0x1 << CHIP_REV_SHIFT) +/* assume maximum 5 revisions */ +#define CHIP_REV_IS_SLOW(bp) (CHIP_REV_VAL(bp) > 0x00005000) +/* Emul versions are A=>0xe, B=>0xc, C=>0xa, D=>8, E=>6 */ +#define CHIP_REV_IS_EMUL(bp) ((CHIP_REV_IS_SLOW(bp)) && \ + !(CHIP_REV_VAL(bp) & 0x00001000)) +/* FPGA versions are A=>0xf, B=>0xd, C=>0xb, D=>9, E=>7 */ +#define CHIP_REV_IS_FPGA(bp) ((CHIP_REV_IS_SLOW(bp)) && \ + (CHIP_REV_VAL(bp) & 0x00001000)) + +#define CHIP_TIME(bp) ((CHIP_REV_IS_EMUL(bp)) ? 2000 : \ + ((CHIP_REV_IS_FPGA(bp)) ? 200 : 1)) + +#define CHIP_METAL(bp) (bp->common.chip_id & 0x00000ff0) +#define CHIP_BOND_ID(bp) (bp->common.chip_id & 0x0000000f) +#define CHIP_REV_SIM(bp) (((CHIP_REV_MASK - CHIP_REV_VAL(bp)) >>\ + (CHIP_REV_SHIFT + 1)) \ + << CHIP_REV_SHIFT) +#define CHIP_REV(bp) (CHIP_REV_IS_SLOW(bp) ? \ + CHIP_REV_SIM(bp) :\ + CHIP_REV_VAL(bp)) +#define CHIP_IS_E3B0(bp) (CHIP_IS_E3(bp) && \ + (CHIP_REV(bp) == CHIP_REV_Bx)) +#define CHIP_IS_E3A0(bp) (CHIP_IS_E3(bp) && \ + (CHIP_REV(bp) == CHIP_REV_Ax)) +/* This define is used in two main places: + * 1. In the early stages of nic_load, to know if to configure Parser / Searcher + * to nic-only mode or to offload mode. Offload mode is configured if either the + * chip is E1x (where MIC_MODE register is not applicable), or if cnic already + * registered for this port (which means that the user wants storage services). + * 2. During cnic-related load, to know if offload mode is already configured in + * the HW or needs to be configured. + * Since the transition from nic-mode to offload-mode in HW causes traffic + * corruption, nic-mode is configured only in ports on which storage services + * where never requested. + */ +#define CONFIGURE_NIC_MODE(bp) (!CHIP_IS_E1x(bp) && !CNIC_ENABLED(bp)) + + int flash_size; +#define BNX2X_NVRAM_1MB_SIZE 0x20000 /* 1M bit in bytes */ +#define BNX2X_NVRAM_TIMEOUT_COUNT 30000 +#define BNX2X_NVRAM_PAGE_SIZE 256 + + u32 shmem_base; + u32 shmem2_base; + u32 mf_cfg_base; + u32 mf2_cfg_base; + + u32 hw_config; + + u32 bc_ver; + + u8 int_block; +#define INT_BLOCK_HC 0 +#define INT_BLOCK_IGU 1 +#define INT_BLOCK_MODE_NORMAL 0 +#define INT_BLOCK_MODE_BW_COMP 2 +#define CHIP_INT_MODE_IS_NBC(bp) \ + (!CHIP_IS_E1x(bp) && \ + !((bp)->common.int_block & INT_BLOCK_MODE_BW_COMP)) +#define CHIP_INT_MODE_IS_BC(bp) (!CHIP_INT_MODE_IS_NBC(bp)) + + u8 chip_port_mode; +#define CHIP_4_PORT_MODE 0x0 +#define CHIP_2_PORT_MODE 0x1 +#define CHIP_PORT_MODE_NONE 0x2 +#define CHIP_MODE(bp) (bp->common.chip_port_mode) +#define CHIP_MODE_IS_4_PORT(bp) (CHIP_MODE(bp) == CHIP_4_PORT_MODE) + + u32 boot_mode; +}; + +/* IGU MSIX STATISTICS on 57712: 64 for VFs; 4 for PFs; 4 for Attentions */ +#define BNX2X_IGU_STAS_MSG_VF_CNT 64 +#define BNX2X_IGU_STAS_MSG_PF_CNT 4 + +#define MAX_IGU_ATTN_ACK_TO 100 +/* end of common */ + +/* port */ + +struct bnx2x_port { + u32 pmf; + + u32 link_config[LINK_CONFIG_SIZE]; + + u32 supported[LINK_CONFIG_SIZE]; + + u32 advertising[LINK_CONFIG_SIZE]; + + u32 phy_addr; + + /* used to synchronize phy accesses */ + struct mutex phy_mutex; + + u32 port_stx; + + struct nig_stats old_nig_stats; +}; + +/* end of port */ + +#define STATS_OFFSET32(stat_name) \ + (offsetof(struct bnx2x_eth_stats, stat_name) / 4) + +/* slow path */ +#define BNX2X_MAX_NUM_OF_VFS 64 +#define BNX2X_VF_CID_WND 4 /* log num of queues per VF. HW config. */ +#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) + +/* We need to reserve doorbell addresses for all VF and queue combinations */ +#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) + +/* The doorbell is configured to have the same number of CIDs for PFs and for + * VFs. For this reason the PF CID zone is as large as the VF zone. + */ +#define BNX2X_FIRST_VF_CID BNX2X_VF_CIDS +#define BNX2X_MAX_NUM_VF_QUEUES 64 +#define BNX2X_VF_ID_INVALID 0xFF + +/* the number of VF CIDS multiplied by the amount of bytes reserved for each + * cid must not exceed the size of the VF doorbell + */ +#define BNX2X_VF_BAR_SIZE 512 +#if (BNX2X_VF_BAR_SIZE < BNX2X_CIDS_PER_VF * (1 << BNX2X_DB_SHIFT)) +#error "VF doorbell bar size is 512" +#endif + +/* + * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is + * control by the number of fast-path status blocks supported by the + * device (HW/FW). Each fast-path status block (FP-SB) aka non-default + * status block represents an independent interrupts context that can + * serve a regular L2 networking queue. However special L2 queues such + * as the FCoE queue do not require a FP-SB and other components like + * the CNIC may consume FP-SB reducing the number of possible L2 queues + * + * If the maximum number of FP-SB available is X then: + * a. If CNIC is supported it consumes 1 FP-SB thus the max number of + * regular L2 queues is Y=X-1 + * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) + * c. If the FCoE L2 queue is supported the actual number of L2 queues + * is Y+1 + * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for + * slow-path interrupts) or Y+2 if CNIC is supported (one additional + * FP interrupt context for the CNIC). + * e. The number of HW context (CID count) is always X or X+1 if FCoE + * L2 queue is supported. The cid for the FCoE L2 queue is always X. + */ + +/* fast-path interrupt contexts E1x */ +#define FP_SB_MAX_E1x 16 +/* fast-path interrupt contexts E2 */ +#define FP_SB_MAX_E2 HC_SB_MAX_SB_E2 + +union cdu_context { + struct eth_context eth; + char pad[1024]; +}; + +/* CDU host DB constants */ +#define CDU_ILT_PAGE_SZ_HW 2 +#define CDU_ILT_PAGE_SZ (8192 << CDU_ILT_PAGE_SZ_HW) /* 32K */ +#define ILT_PAGE_CIDS (CDU_ILT_PAGE_SZ / sizeof(union cdu_context)) + +#define CNIC_ISCSI_CID_MAX 256 +#define CNIC_FCOE_CID_MAX 2048 +#define CNIC_CID_MAX (CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX) +#define CNIC_ILT_LINES DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS) + +#define QM_ILT_PAGE_SZ_HW 0 +#define QM_ILT_PAGE_SZ (4096 << QM_ILT_PAGE_SZ_HW) /* 4K */ +#define QM_CID_ROUND 1024 + +/* TM (timers) host DB constants */ +#define TM_ILT_PAGE_SZ_HW 0 +#define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */ +#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \ + BNX2X_VF_CIDS + \ + CNIC_ISCSI_CID_MAX) +#define TM_ILT_SZ (8 * TM_CONN_NUM) +#define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ) + +/* SRC (Searcher) host DB constants */ +#define SRC_ILT_PAGE_SZ_HW 0 +#define SRC_ILT_PAGE_SZ (4096 << SRC_ILT_PAGE_SZ_HW) /* 4K */ +#define SRC_HASH_BITS 10 +#define SRC_CONN_NUM (1 << SRC_HASH_BITS) /* 1024 */ +#define SRC_ILT_SZ (sizeof(struct src_ent) * SRC_CONN_NUM) +#define SRC_T2_SZ SRC_ILT_SZ +#define SRC_ILT_LINES DIV_ROUND_UP(SRC_ILT_SZ, SRC_ILT_PAGE_SZ) + +#define MAX_DMAE_C 8 + +/* DMA memory not used in fastpath */ +struct bnx2x_slowpath { + union { + struct mac_configuration_cmd e1x; + struct eth_classify_rules_ramrod_data e2; + } mac_rdata; + + union { + struct eth_classify_rules_ramrod_data e2; + } vlan_rdata; + + union { + struct tstorm_eth_mac_filter_config e1x; + struct eth_filter_rules_ramrod_data e2; + } rx_mode_rdata; + + union { + struct mac_configuration_cmd e1; + struct eth_multicast_rules_ramrod_data e2; + } mcast_rdata; + + struct eth_rss_update_ramrod_data rss_rdata; + + /* Queue State related ramrods are always sent under rtnl_lock */ + union { + struct client_init_ramrod_data init_data; + struct client_update_ramrod_data update_data; + struct tpa_update_ramrod_data tpa_data; + } q_rdata; + + union { + struct function_start_data func_start; + /* pfc configuration for DCBX ramrod */ + struct flow_control_configuration pfc_config; + } func_rdata; + + /* afex ramrod can not be a part of func_rdata union because these + * events might arrive in parallel to other events from func_rdata. + * Therefore, if they would have been defined in the same union, + * data can get corrupted. + */ + union { + struct afex_vif_list_ramrod_data viflist_data; + struct function_update_data func_update; + } func_afex_rdata; + + /* used by dmae command executer */ + struct dmae_command dmae[MAX_DMAE_C]; + + u32 stats_comp; + union mac_stats mac_stats; + struct nig_stats nig_stats; + struct host_port_stats port_stats; + struct host_func_stats func_stats; + + u32 wb_comp; + u32 wb_data[4]; + + union drv_info_to_mcp drv_info_to_mcp; +}; + +#define bnx2x_sp(bp, var) (&bp->slowpath->var) +#define bnx2x_sp_mapping(bp, var) \ + (bp->slowpath_mapping + offsetof(struct bnx2x_slowpath, var)) + +/* attn group wiring */ +#define MAX_DYNAMIC_ATTN_GRPS 8 + +struct attn_route { + u32 sig[5]; +}; + +struct iro { + u32 base; + u16 m1; + u16 m2; + u16 m3; + u16 size; +}; + +struct hw_context { + union cdu_context *vcxt; + dma_addr_t cxt_mapping; + size_t size; +}; + +/* forward */ +struct bnx2x_ilt; + +struct bnx2x_vfdb; + +enum bnx2x_recovery_state { + BNX2X_RECOVERY_DONE, + BNX2X_RECOVERY_INIT, + BNX2X_RECOVERY_WAIT, + BNX2X_RECOVERY_FAILED, + BNX2X_RECOVERY_NIC_LOADING +}; + +/* + * Event queue (EQ or event ring) MC hsi + * NUM_EQ_PAGES and EQ_DESC_CNT_PAGE must be power of 2 + */ +#define NUM_EQ_PAGES 1 +#define EQ_DESC_CNT_PAGE (BCM_PAGE_SIZE / sizeof(union event_ring_elem)) +#define EQ_DESC_MAX_PAGE (EQ_DESC_CNT_PAGE - 1) +#define NUM_EQ_DESC (EQ_DESC_CNT_PAGE * NUM_EQ_PAGES) +#define EQ_DESC_MASK (NUM_EQ_DESC - 1) +#define MAX_EQ_AVAIL (EQ_DESC_MAX_PAGE * NUM_EQ_PAGES - 2) + +/* depends on EQ_DESC_CNT_PAGE being a power of 2 */ +#define NEXT_EQ_IDX(x) ((((x) & EQ_DESC_MAX_PAGE) == \ + (EQ_DESC_MAX_PAGE - 1)) ? (x) + 2 : (x) + 1) + +/* depends on the above and on NUM_EQ_PAGES being a power of 2 */ +#define EQ_DESC(x) ((x) & EQ_DESC_MASK) + +#define BNX2X_EQ_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_EQ_CONS]) + +/* This is a data that will be used to create a link report message. + * We will keep the data used for the last link report in order + * to prevent reporting the same link parameters twice. + */ +struct bnx2x_link_report_data { + u16 line_speed; /* Effective line speed */ + unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */ +}; + +enum { + BNX2X_LINK_REPORT_FD, /* Full DUPLEX */ + BNX2X_LINK_REPORT_LINK_DOWN, + BNX2X_LINK_REPORT_RX_FC_ON, + BNX2X_LINK_REPORT_TX_FC_ON, +}; + +enum { + BNX2X_PORT_QUERY_IDX, + BNX2X_PF_QUERY_IDX, + BNX2X_FCOE_QUERY_IDX, + BNX2X_FIRST_QUEUE_QUERY_IDX, +}; + +struct bnx2x_fw_stats_req { + struct stats_query_header hdr; + struct stats_query_entry query[FP_SB_MAX_E1x+ + BNX2X_FIRST_QUEUE_QUERY_IDX]; +}; + +struct bnx2x_fw_stats_data { + struct stats_counter storm_counters; + struct per_port_stats port; + struct per_pf_stats pf; + struct fcoe_statistics_params fcoe; + struct per_queue_stats queue_stats[1]; +}; + +/* Public slow path states */ +enum sp_rtnl_flag { + BNX2X_SP_RTNL_SETUP_TC, + BNX2X_SP_RTNL_TX_TIMEOUT, + BNX2X_SP_RTNL_FAN_FAILURE, + BNX2X_SP_RTNL_AFEX_F_UPDATE, + BNX2X_SP_RTNL_ENABLE_SRIOV, + BNX2X_SP_RTNL_VFPF_MCAST, + BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, + BNX2X_SP_RTNL_RX_MODE, + BNX2X_SP_RTNL_HYPERVISOR_VLAN, + BNX2X_SP_RTNL_TX_STOP, + BNX2X_SP_RTNL_GET_DRV_VERSION, + BNX2X_SP_RTNL_CHANGE_UDP_PORT, + BNX2X_SP_RTNL_UPDATE_SVID, +}; + +enum bnx2x_iov_flag { + BNX2X_IOV_HANDLE_VF_MSG, + BNX2X_IOV_HANDLE_FLR, +}; + +struct bnx2x_prev_path_list { + struct list_head list; + u8 bus; + u8 slot; + u8 path; + u8 aer; + u8 undi; +}; + +struct bnx2x_sp_objs { + /* MACs object */ + struct bnx2x_vlan_mac_obj mac_obj; + + /* Queue State object */ + struct bnx2x_queue_sp_obj q_obj; + + /* VLANs object */ + struct bnx2x_vlan_mac_obj vlan_obj; +}; + +struct bnx2x_fp_stats { + struct tstorm_per_queue_stats old_tclient; + struct ustorm_per_queue_stats old_uclient; + struct xstorm_per_queue_stats old_xclient; + struct bnx2x_eth_q_stats eth_q_stats; + struct bnx2x_eth_q_stats_old eth_q_stats_old; +}; + +enum { + SUB_MF_MODE_UNKNOWN = 0, + SUB_MF_MODE_UFP, + SUB_MF_MODE_NPAR1_DOT_5, + SUB_MF_MODE_BD, +}; + +struct bnx2x_vlan_entry { + struct list_head link; + u16 vid; + bool hw; +}; + +enum bnx2x_udp_port_type { + BNX2X_UDP_PORT_VXLAN, + BNX2X_UDP_PORT_GENEVE, + BNX2X_UDP_PORT_MAX, +}; + +struct bnx2x_udp_tunnel { + u16 dst_port; + u8 count; +}; + +struct bnx2x { + /* Fields used in the tx and intr/napi performance paths + * are grouped together in the beginning of the structure + */ + struct bnx2x_fastpath *fp; + struct bnx2x_sp_objs *sp_objs; + struct bnx2x_fp_stats *fp_stats; + struct bnx2x_fp_txdata *bnx2x_txq; + void __iomem *regview; + void __iomem *doorbells; + u16 db_size; + + u8 pf_num; /* absolute PF number */ + u8 pfid; /* per-path PF number */ + int base_fw_ndsb; /**/ +#define BP_PATH(bp) (CHIP_IS_E1x(bp) ? 0 : (bp->pf_num & 1)) +#define BP_PORT(bp) (bp->pfid & 1) +#define BP_FUNC(bp) (bp->pfid) +#define BP_ABS_FUNC(bp) (bp->pf_num) +#define BP_VN(bp) ((bp)->pfid >> 1) +#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4) +#define BP_L_ID(bp) (BP_VN(bp) << 2) +#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\ + (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) +#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) + +#ifdef CONFIG_BNX2X_SRIOV + /* protects vf2pf mailbox from simultaneous access */ + struct mutex vf2pf_mutex; + /* vf pf channel mailbox contains request and response buffers */ + struct bnx2x_vf_mbx_msg *vf2pf_mbox; + dma_addr_t vf2pf_mbox_mapping; + + /* we set aside a copy of the acquire response */ + struct pfvf_acquire_resp_tlv acquire_resp; + + /* bulletin board for messages from pf to vf */ + union pf_vf_bulletin *pf2vf_bulletin; + dma_addr_t pf2vf_bulletin_mapping; + + union pf_vf_bulletin shadow_bulletin; + struct pf_vf_bulletin_content old_bulletin; + + u16 requested_nr_virtfn; +#endif /* CONFIG_BNX2X_SRIOV */ + + struct net_device *dev; + struct pci_dev *pdev; + + const struct iro *iro_arr; +#define IRO (bp->iro_arr) + + enum bnx2x_recovery_state recovery_state; + int is_leader; + struct msix_entry *msix_table; + + int tx_ring_size; + +/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ +#define ETH_OVERHEAD (ETH_HLEN + 8 + 8) +#define ETH_MIN_PACKET_SIZE (ETH_ZLEN - ETH_HLEN) +#define ETH_MAX_PACKET_SIZE ETH_DATA_LEN +#define ETH_MAX_JUMBO_PACKET_SIZE 9600 +/* TCP with Timestamp Option (32) + IPv6 (40) */ +#define ETH_MAX_TPA_HEADER_SIZE 72 + + /* Max supported alignment is 256 (8 shift) + * minimal alignment shift 6 is optimal for 57xxx HW performance + */ +#define BNX2X_RX_ALIGN_SHIFT max(6, min(8, L1_CACHE_SHIFT)) + + /* FW uses 2 Cache lines Alignment for start packet and size + * + * We assume skb_build() uses sizeof(struct skb_shared_info) bytes + * at the end of skb->data, to avoid wasting a full cache line. + * This reduces memory use (skb->truesize). + */ +#define BNX2X_FW_RX_ALIGN_START (1UL << BNX2X_RX_ALIGN_SHIFT) + +#define BNX2X_FW_RX_ALIGN_END \ + max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT, \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) + +#define BNX2X_PXP_DRAM_ALIGN (BNX2X_RX_ALIGN_SHIFT - 5) + + struct host_sp_status_block *def_status_blk; +#define DEF_SB_IGU_ID 16 +#define DEF_SB_ID HC_SP_SB_ID + __le16 def_idx; + __le16 def_att_idx; + u32 attn_state; + struct attn_route attn_group[MAX_DYNAMIC_ATTN_GRPS]; + + /* slow path ring */ + struct eth_spe *spq; + dma_addr_t spq_mapping; + u16 spq_prod_idx; + struct eth_spe *spq_prod_bd; + struct eth_spe *spq_last_bd; + __le16 *dsb_sp_prod; + atomic_t cq_spq_left; /* ETH_XXX ramrods credit */ + /* used to synchronize spq accesses */ + spinlock_t spq_lock; + + /* event queue */ + union event_ring_elem *eq_ring; + dma_addr_t eq_mapping; + u16 eq_prod; + u16 eq_cons; + __le16 *eq_cons_sb; + atomic_t eq_spq_left; /* COMMON_XXX ramrods credit */ + + /* Counter for marking that there is a STAT_QUERY ramrod pending */ + u16 stats_pending; + /* Counter for completed statistics ramrods */ + u16 stats_comp; + + /* End of fields used in the performance code paths */ + + int panic; + int msg_enable; + + u32 flags; +#define PCIX_FLAG (1 << 0) +#define PCI_32BIT_FLAG (1 << 1) +#define ONE_PORT_FLAG (1 << 2) +#define NO_WOL_FLAG (1 << 3) +#define USING_MSIX_FLAG (1 << 5) +#define USING_MSI_FLAG (1 << 6) +#define DISABLE_MSI_FLAG (1 << 7) +#define NO_MCP_FLAG (1 << 9) +#define MF_FUNC_DIS (1 << 11) +#define OWN_CNIC_IRQ (1 << 12) +#define NO_ISCSI_OOO_FLAG (1 << 13) +#define NO_ISCSI_FLAG (1 << 14) +#define NO_FCOE_FLAG (1 << 15) +#define BC_SUPPORTS_PFC_STATS (1 << 17) +#define TX_SWITCHING (1 << 18) +#define BC_SUPPORTS_FCOE_FEATURES (1 << 19) +#define USING_SINGLE_MSIX_FLAG (1 << 20) +#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21) +#define IS_VF_FLAG (1 << 22) +#define BC_SUPPORTS_RMMOD_CMD (1 << 23) +#define HAS_PHYS_PORT_ID (1 << 24) +#define AER_ENABLED (1 << 25) +#define PTP_SUPPORTED (1 << 26) +#define TX_TIMESTAMPING_EN (1 << 27) + +#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) + +#ifdef CONFIG_BNX2X_SRIOV +#define IS_VF(bp) ((bp)->flags & IS_VF_FLAG) +#define IS_PF(bp) (!((bp)->flags & IS_VF_FLAG)) +#else +#define IS_VF(bp) false +#define IS_PF(bp) true +#endif + +#define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG) +#define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG) +#define NO_FCOE(bp) ((bp)->flags & NO_FCOE_FLAG) + + u8 cnic_support; + bool cnic_enabled; + bool cnic_loaded; + struct cnic_eth_dev *(*cnic_probe)(struct net_device *); + + /* Flag that indicates that we can start looking for FCoE L2 queue + * completions in the default status block. + */ + bool fcoe_init; + + int mrrs; + + struct delayed_work sp_task; + struct delayed_work iov_task; + + atomic_t interrupt_occurred; + struct delayed_work sp_rtnl_task; + + struct delayed_work period_task; + struct timer_list timer; + int current_interval; + + u16 fw_seq; + u16 fw_drv_pulse_wr_seq; + u32 func_stx; + + struct link_params link_params; + struct link_vars link_vars; + u32 link_cnt; + struct bnx2x_link_report_data last_reported_link; + bool force_link_down; + + struct mdio_if_info mdio; + + struct bnx2x_common common; + struct bnx2x_port port; + + struct cmng_init cmng; + + u32 mf_config[E1HVN_MAX]; + u32 mf_ext_config; + u32 path_has_ovlan; /* E3 */ + u16 mf_ov; + u8 mf_mode; +#define IS_MF(bp) (bp->mf_mode != 0) +#define IS_MF_SI(bp) (bp->mf_mode == MULTI_FUNCTION_SI) +#define IS_MF_SD(bp) (bp->mf_mode == MULTI_FUNCTION_SD) +#define IS_MF_AFEX(bp) (bp->mf_mode == MULTI_FUNCTION_AFEX) + u8 mf_sub_mode; +#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \ + bp->mf_sub_mode == SUB_MF_MODE_UFP) +#define IS_MF_BD(bp) (IS_MF_SD(bp) && \ + bp->mf_sub_mode == SUB_MF_MODE_BD) + + u8 wol; + + int rx_ring_size; + + u16 tx_quick_cons_trip_int; + u16 tx_quick_cons_trip; + u16 tx_ticks_int; + u16 tx_ticks; + + u16 rx_quick_cons_trip_int; + u16 rx_quick_cons_trip; + u16 rx_ticks_int; + u16 rx_ticks; +/* Maximal coalescing timeout in us */ +#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR) + + u32 lin_cnt; + + u16 state; +#define BNX2X_STATE_CLOSED 0 +#define BNX2X_STATE_OPENING_WAIT4_LOAD 0x1000 +#define BNX2X_STATE_OPENING_WAIT4_PORT 0x2000 +#define BNX2X_STATE_OPEN 0x3000 +#define BNX2X_STATE_CLOSING_WAIT4_HALT 0x4000 +#define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000 + +#define BNX2X_STATE_DIAG 0xe000 +#define BNX2X_STATE_ERROR 0xf000 + +#define BNX2X_MAX_PRIORITY 8 + int num_queues; + uint num_ethernet_queues; + uint num_cnic_queues; + int disable_tpa; + + u32 rx_mode; +#define BNX2X_RX_MODE_NONE 0 +#define BNX2X_RX_MODE_NORMAL 1 +#define BNX2X_RX_MODE_ALLMULTI 2 +#define BNX2X_RX_MODE_PROMISC 3 +#define BNX2X_MAX_MULTICAST 64 + + u8 igu_dsb_id; + u8 igu_base_sb; + u8 igu_sb_cnt; + u8 min_msix_vec_cnt; + + u32 igu_base_addr; + dma_addr_t def_status_blk_mapping; + + struct bnx2x_slowpath *slowpath; + dma_addr_t slowpath_mapping; + + /* Mechanism protecting the drv_info_to_mcp */ + struct mutex drv_info_mutex; + bool drv_info_mng_owner; + + /* Total number of FW statistics requests */ + u8 fw_stats_num; + + /* + * This is a memory buffer that will contain both statistics + * ramrod request and data. + */ + void *fw_stats; + dma_addr_t fw_stats_mapping; + + /* + * FW statistics request shortcut (points at the + * beginning of fw_stats buffer). + */ + struct bnx2x_fw_stats_req *fw_stats_req; + dma_addr_t fw_stats_req_mapping; + int fw_stats_req_sz; + + /* + * FW statistics data shortcut (points at the beginning of + * fw_stats buffer + fw_stats_req_sz). + */ + struct bnx2x_fw_stats_data *fw_stats_data; + dma_addr_t fw_stats_data_mapping; + int fw_stats_data_sz; + + /* For max 1024 cids (VF RSS), 32KB ILT page size and 1KB + * context size we need 8 ILT entries. + */ +#define ILT_MAX_L2_LINES 32 + struct hw_context context[ILT_MAX_L2_LINES]; + + struct bnx2x_ilt *ilt; +#define BP_ILT(bp) ((bp)->ilt) +#define ILT_MAX_LINES 256 +/* + * Maximum supported number of RSS queues: number of IGU SBs minus one that goes + * to CNIC. + */ +#define BNX2X_MAX_RSS_COUNT(bp) ((bp)->igu_sb_cnt - CNIC_SUPPORT(bp)) + +/* + * Maximum CID count that might be required by the bnx2x: + * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI + */ + +#define BNX2X_L2_CID_COUNT(bp) (BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \ + + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp))) +#define BNX2X_L2_MAX_CID(bp) (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \ + + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp))) +#define L2_ILT_LINES(bp) (DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\ + ILT_PAGE_CIDS)) + + int qm_cid_count; + + bool dropless_fc; + + void *t2; + dma_addr_t t2_mapping; + struct cnic_ops __rcu *cnic_ops; + void *cnic_data; + u32 cnic_tag; + struct cnic_eth_dev cnic_eth_dev; + union host_hc_status_block cnic_sb; + dma_addr_t cnic_sb_mapping; + struct eth_spe *cnic_kwq; + struct eth_spe *cnic_kwq_prod; + struct eth_spe *cnic_kwq_cons; + struct eth_spe *cnic_kwq_last; + u16 cnic_kwq_pending; + u16 cnic_spq_pending; + u8 fip_mac[ETH_ALEN]; + struct mutex cnic_mutex; + struct bnx2x_vlan_mac_obj iscsi_l2_mac_obj; + + /* Start index of the "special" (CNIC related) L2 clients */ + u8 cnic_base_cl_id; + + int dmae_ready; + /* used to synchronize dmae accesses */ + spinlock_t dmae_lock; + + /* used to protect the FW mail box */ + struct mutex fw_mb_mutex; + + /* used to synchronize stats collecting */ + int stats_state; + + /* used for synchronization of concurrent threads statistics handling */ + struct semaphore stats_lock; + + /* used by dmae command loader */ + struct dmae_command stats_dmae; + int executer_idx; + + u16 stats_counter; + struct bnx2x_eth_stats eth_stats; + struct host_func_stats func_stats; + struct bnx2x_eth_stats_old eth_stats_old; + struct bnx2x_net_stats_old net_stats_old; + struct bnx2x_fw_port_stats_old fw_stats_old; + bool stats_init; + + struct z_stream_s *strm; + void *gunzip_buf; + dma_addr_t gunzip_mapping; + int gunzip_outlen; +#define FW_BUF_SIZE 0x8000 +#define GUNZIP_BUF(bp) (bp->gunzip_buf) +#define GUNZIP_PHYS(bp) (bp->gunzip_mapping) +#define GUNZIP_OUTLEN(bp) (bp->gunzip_outlen) + + struct raw_op *init_ops; + /* Init blocks offsets inside init_ops */ + u16 *init_ops_offsets; + /* Data blob - has 32 bit granularity */ + u32 *init_data; + u32 init_mode_flags; +#define INIT_MODE_FLAGS(bp) (bp->init_mode_flags) + /* Zipped PRAM blobs - raw data */ + const u8 *tsem_int_table_data; + const u8 *tsem_pram_data; + const u8 *usem_int_table_data; + const u8 *usem_pram_data; + const u8 *xsem_int_table_data; + const u8 *xsem_pram_data; + const u8 *csem_int_table_data; + const u8 *csem_pram_data; +#define INIT_OPS(bp) (bp->init_ops) +#define INIT_OPS_OFFSETS(bp) (bp->init_ops_offsets) +#define INIT_DATA(bp) (bp->init_data) +#define INIT_TSEM_INT_TABLE_DATA(bp) (bp->tsem_int_table_data) +#define INIT_TSEM_PRAM_DATA(bp) (bp->tsem_pram_data) +#define INIT_USEM_INT_TABLE_DATA(bp) (bp->usem_int_table_data) +#define INIT_USEM_PRAM_DATA(bp) (bp->usem_pram_data) +#define INIT_XSEM_INT_TABLE_DATA(bp) (bp->xsem_int_table_data) +#define INIT_XSEM_PRAM_DATA(bp) (bp->xsem_pram_data) +#define INIT_CSEM_INT_TABLE_DATA(bp) (bp->csem_int_table_data) +#define INIT_CSEM_PRAM_DATA(bp) (bp->csem_pram_data) + +#define PHY_FW_VER_LEN 20 + char fw_ver[32]; + const struct firmware *firmware; + + struct bnx2x_vfdb *vfdb; +#define IS_SRIOV(bp) ((bp)->vfdb) + + /* DCB support on/off */ + u16 dcb_state; +#define BNX2X_DCB_STATE_OFF 0 +#define BNX2X_DCB_STATE_ON 1 + + /* DCBX engine mode */ + int dcbx_enabled; +#define BNX2X_DCBX_ENABLED_OFF 0 +#define BNX2X_DCBX_ENABLED_ON_NEG_OFF 1 +#define BNX2X_DCBX_ENABLED_ON_NEG_ON 2 +#define BNX2X_DCBX_ENABLED_INVALID (-1) + + bool dcbx_mode_uset; + + struct bnx2x_config_dcbx_params dcbx_config_params; + struct bnx2x_dcbx_port_params dcbx_port_params; + int dcb_version; + + /* CAM credit pools */ + struct bnx2x_credit_pool_obj vlans_pool; + + struct bnx2x_credit_pool_obj macs_pool; + + /* RX_MODE object */ + struct bnx2x_rx_mode_obj rx_mode_obj; + + /* MCAST object */ + struct bnx2x_mcast_obj mcast_obj; + + /* RSS configuration object */ + struct bnx2x_rss_config_obj rss_conf_obj; + + /* Function State controlling object */ + struct bnx2x_func_sp_obj func_obj; + + unsigned long sp_state; + + /* operation indication for the sp_rtnl task */ + unsigned long sp_rtnl_state; + + /* Indication of the IOV tasks */ + unsigned long iov_task_state; + + /* DCBX Negotiation results */ + struct dcbx_features dcbx_local_feat; + u32 dcbx_error; + +#ifdef BCM_DCBNL + struct dcbx_features dcbx_remote_feat; + u32 dcbx_remote_flags; +#endif + /* AFEX: store default vlan used */ + int afex_def_vlan_tag; + enum mf_cfg_afex_vlan_mode afex_vlan_mode; + u32 pending_max; + + /* multiple tx classes of service */ + u8 max_cos; + + /* priority to cos mapping */ + u8 prio_to_cos[8]; + + int fp_array_size; + u32 dump_preset_idx; + + u8 phys_port_id[ETH_ALEN]; + + /* PTP related context */ + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_info; + struct work_struct ptp_task; + struct cyclecounter cyclecounter; + struct timecounter timecounter; + bool timecounter_init_done; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; + bool hwtstamp_ioctl_called; + u16 tx_type; + u16 rx_filter; + + struct bnx2x_link_report_data vf_link_vars; + struct list_head vlan_reg; + u16 vlan_cnt; + u16 vlan_credit; + bool accept_any_vlan; + + /* Vxlan/Geneve related information */ + struct bnx2x_udp_tunnel udp_tunnel_ports[BNX2X_UDP_PORT_MAX]; +}; + +/* Tx queues may be less or equal to Rx queues */ +extern int num_queues; +#define BNX2X_NUM_QUEUES(bp) (bp->num_queues) +#define BNX2X_NUM_ETH_QUEUES(bp) ((bp)->num_ethernet_queues) +#define BNX2X_NUM_NON_CNIC_QUEUES(bp) (BNX2X_NUM_QUEUES(bp) - \ + (bp)->num_cnic_queues) +#define BNX2X_NUM_RX_QUEUES(bp) BNX2X_NUM_QUEUES(bp) + +#define is_multi(bp) (BNX2X_NUM_QUEUES(bp) > 1) + +#define BNX2X_MAX_QUEUES(bp) BNX2X_MAX_RSS_COUNT(bp) +/* #define is_eth_multi(bp) (BNX2X_NUM_ETH_QUEUES(bp) > 1) */ + +#define RSS_IPV4_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY + +#define RSS_IPV4_TCP_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY + +#define RSS_IPV6_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY + +#define RSS_IPV6_TCP_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY + +struct bnx2x_func_init_params { + /* dma */ + bool spq_active; + dma_addr_t spq_map; + u16 spq_prod; + + u16 func_id; /* abs fid */ + u16 pf_id; +}; + +#define for_each_cnic_queue(bp, var) \ + for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \ + (var)++) \ + if (skip_queue(bp, var)) \ + continue; \ + else + +#define for_each_eth_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++) + +#define for_each_nondefault_eth_queue(bp, var) \ + for ((var) = 1; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++) + +#define for_each_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_queue(bp, var)) \ + continue; \ + else + +/* Skip forwarding FP */ +#define for_each_valid_rx_queue(bp, var) \ + for ((var) = 0; \ + (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) : \ + BNX2X_NUM_ETH_QUEUES(bp)); \ + (var)++) \ + if (skip_rx_queue(bp, var)) \ + continue; \ + else + +#define for_each_rx_queue_cnic(bp, var) \ + for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \ + (var)++) \ + if (skip_rx_queue(bp, var)) \ + continue; \ + else + +#define for_each_rx_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_rx_queue(bp, var)) \ + continue; \ + else + +/* Skip OOO FP */ +#define for_each_valid_tx_queue(bp, var) \ + for ((var) = 0; \ + (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) : \ + BNX2X_NUM_ETH_QUEUES(bp)); \ + (var)++) \ + if (skip_tx_queue(bp, var)) \ + continue; \ + else + +#define for_each_tx_queue_cnic(bp, var) \ + for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \ + (var)++) \ + if (skip_tx_queue(bp, var)) \ + continue; \ + else + +#define for_each_tx_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_tx_queue(bp, var)) \ + continue; \ + else + +#define for_each_nondefault_queue(bp, var) \ + for ((var) = 1; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_queue(bp, var)) \ + continue; \ + else + +#define for_each_cos_in_tx_queue(fp, var) \ + for ((var) = 0; (var) < (fp)->max_cos; (var)++) + +/* skip rx queue + * if FCOE l2 support is disabled and this is the fcoe L2 queue + */ +#define skip_rx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx)) + +/* skip tx queue + * if FCOE l2 support is disabled and this is the fcoe L2 queue + */ +#define skip_tx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx)) + +#define skip_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx)) + +/** + * bnx2x_set_mac_one - configure a single MAC address + * + * @bp: driver handle + * @mac: MAC to configure + * @obj: MAC object handle + * @set: if 'true' add a new MAC, otherwise - delete + * @mac_type: the type of the MAC to configure (e.g. ETH, UC list) + * @ramrod_flags: RAMROD_XXX flags (e.g. RAMROD_CONT, RAMROD_COMP_WAIT) + * + * Configures one MAC according to provided parameters or continues the + * execution of previously scheduled commands if RAMROD_CONT is set in + * ramrod_flags. + * + * Returns zero if operation has successfully completed, a positive value if the + * operation has been successfully scheduled and a negative - if a requested + * operations has failed. + */ +int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, + struct bnx2x_vlan_mac_obj *obj, bool set, + int mac_type, unsigned long *ramrod_flags); + +int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, + struct bnx2x_vlan_mac_obj *obj, bool set, + unsigned long *ramrod_flags); + +/** + * bnx2x_del_all_macs - delete all MACs configured for the specific MAC object + * + * @bp: driver handle + * @mac_obj: MAC object handle + * @mac_type: type of the MACs to clear (BNX2X_XXX_MAC) + * @wait_for_comp: if 'true' block until completion + * + * Deletes all MACs of the specific type (e.g. ETH, UC list). + * + * Returns zero if operation has successfully completed, a positive value if the + * operation has been successfully scheduled and a negative - if a requested + * operations has failed. + */ +int bnx2x_del_all_macs(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + int mac_type, bool wait_for_comp); + +/* Init Function API */ +void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p); +void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, + u8 vf_valid, int fw_sb_id, int igu_sb_id); +int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port); +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); +int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode); +int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); +void bnx2x_read_mf_cfg(struct bnx2x *bp); + +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val); + +/* dmae */ +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32); +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, + u32 len32); +void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx); +u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type); +u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode); +u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, + bool with_comp, u8 comp_type); + +void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u8 src_type, u8 dst_type); +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp); + +/* FLR related routines */ +u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp); +void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count); +int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt); +u8 bnx2x_is_pcie_pending(struct pci_dev *dev); +int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt); + +void bnx2x_calc_fc_adv(struct bnx2x *bp); +int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, + u32 data_hi, u32 data_lo, int cmd_type); +void bnx2x_update_coalesce(struct bnx2x *bp); +int bnx2x_get_cur_phy_idx(struct bnx2x *bp); + +bool bnx2x_port_after_undi(struct bnx2x *bp); + +static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, + int wait) +{ + u32 val; + + do { + val = REG_RD(bp, reg); + if (val == expected) + break; + ms -= wait; + msleep(wait); + + } while (ms > 0); + + return val; +} + +void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, + bool is_pf); + +#define BNX2X_ILT_ZALLOC(x, y, size) \ + x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL) + +#define BNX2X_ILT_FREE(x, y, size) \ + do { \ + if (x) { \ + dma_free_coherent(&bp->pdev->dev, size, x, y); \ + x = NULL; \ + y = 0; \ + } \ + } while (0) + +#define ILOG2(x) (ilog2((x))) + +#define ILT_NUM_PAGE_ENTRIES (3072) +/* In 57710/11 we use whole table since we have 8 func + * In 57712 we have only 4 func, but use same size per func, then only half of + * the table in use + */ +#define ILT_PER_FUNC (ILT_NUM_PAGE_ENTRIES/8) + +#define FUNC_ILT_BASE(func) (func * ILT_PER_FUNC) +/* + * the phys address is shifted right 12 bits and has an added + * 1=valid bit added to the 53rd bit + * then since this is a wide register(TM) + * we split it into two 32 bit writes + */ +#define ONCHIP_ADDR1(x) ((u32)(((u64)x >> 12) & 0xFFFFFFFF)) +#define ONCHIP_ADDR2(x) ((u32)((1 << 20) | ((u64)x >> 44))) + +/* load/unload mode */ +#define LOAD_NORMAL 0 +#define LOAD_OPEN 1 +#define LOAD_DIAG 2 +#define LOAD_LOOPBACK_EXT 3 +#define UNLOAD_NORMAL 0 +#define UNLOAD_CLOSE 1 +#define UNLOAD_RECOVERY 2 + +/* DMAE command defines */ +#define DMAE_TIMEOUT -1 +#define DMAE_PCI_ERROR -2 /* E2 and onward */ +#define DMAE_NOT_RDY -3 +#define DMAE_PCI_ERR_FLAG 0x80000000 + +#define DMAE_SRC_PCI 0 +#define DMAE_SRC_GRC 1 + +#define DMAE_DST_NONE 0 +#define DMAE_DST_PCI 1 +#define DMAE_DST_GRC 2 + +#define DMAE_COMP_PCI 0 +#define DMAE_COMP_GRC 1 + +/* E2 and onward - PCI error handling in the completion */ + +#define DMAE_COMP_REGULAR 0 +#define DMAE_COM_SET_ERR 1 + +#define DMAE_CMD_SRC_PCI (DMAE_SRC_PCI << \ + DMAE_COMMAND_SRC_SHIFT) +#define DMAE_CMD_SRC_GRC (DMAE_SRC_GRC << \ + DMAE_COMMAND_SRC_SHIFT) + +#define DMAE_CMD_DST_PCI (DMAE_DST_PCI << \ + DMAE_COMMAND_DST_SHIFT) +#define DMAE_CMD_DST_GRC (DMAE_DST_GRC << \ + DMAE_COMMAND_DST_SHIFT) + +#define DMAE_CMD_C_DST_PCI (DMAE_COMP_PCI << \ + DMAE_COMMAND_C_DST_SHIFT) +#define DMAE_CMD_C_DST_GRC (DMAE_COMP_GRC << \ + DMAE_COMMAND_C_DST_SHIFT) + +#define DMAE_CMD_C_ENABLE DMAE_COMMAND_C_TYPE_ENABLE + +#define DMAE_CMD_ENDIANITY_NO_SWAP (0 << DMAE_COMMAND_ENDIANITY_SHIFT) +#define DMAE_CMD_ENDIANITY_B_SWAP (1 << DMAE_COMMAND_ENDIANITY_SHIFT) +#define DMAE_CMD_ENDIANITY_DW_SWAP (2 << DMAE_COMMAND_ENDIANITY_SHIFT) +#define DMAE_CMD_ENDIANITY_B_DW_SWAP (3 << DMAE_COMMAND_ENDIANITY_SHIFT) + +#define DMAE_CMD_PORT_0 0 +#define DMAE_CMD_PORT_1 DMAE_COMMAND_PORT + +#define DMAE_CMD_SRC_RESET DMAE_COMMAND_SRC_RESET +#define DMAE_CMD_DST_RESET DMAE_COMMAND_DST_RESET +#define DMAE_CMD_E1HVN_SHIFT DMAE_COMMAND_E1HVN_SHIFT + +#define DMAE_SRC_PF 0 +#define DMAE_SRC_VF 1 + +#define DMAE_DST_PF 0 +#define DMAE_DST_VF 1 + +#define DMAE_C_SRC 0 +#define DMAE_C_DST 1 + +#define DMAE_LEN32_RD_MAX 0x80 +#define DMAE_LEN32_WR_MAX(bp) (CHIP_IS_E1(bp) ? 0x400 : 0x2000) + +#define DMAE_COMP_VAL 0x60d0d0ae /* E2 and on - upper bit + * indicates error + */ + +#define MAX_DMAE_C_PER_PORT 8 +#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ + BP_VN(bp)) +#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ + E1HVN_MAX) + +/* Following is the DMAE channel number allocation for the clients. + * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively. + * Driver: 0-3 and 8-11 (for PF dmae operations) + * 4 and 12 (for stats requests) + */ +#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */ + +/* PCIE link and speed */ +#define PCICFG_LINK_WIDTH 0x1f00000 +#define PCICFG_LINK_WIDTH_SHIFT 20 +#define PCICFG_LINK_SPEED 0xf0000 +#define PCICFG_LINK_SPEED_SHIFT 16 + +#define BNX2X_NUM_TESTS_SF 7 +#define BNX2X_NUM_TESTS_MF 3 +#define BNX2X_NUM_TESTS(bp) (IS_MF(bp) ? BNX2X_NUM_TESTS_MF : \ + IS_VF(bp) ? 0 : BNX2X_NUM_TESTS_SF) + +#define BNX2X_PHY_LOOPBACK 0 +#define BNX2X_MAC_LOOPBACK 1 +#define BNX2X_EXT_LOOPBACK 2 +#define BNX2X_PHY_LOOPBACK_FAILED 1 +#define BNX2X_MAC_LOOPBACK_FAILED 2 +#define BNX2X_EXT_LOOPBACK_FAILED 3 +#define BNX2X_LOOPBACK_FAILED (BNX2X_MAC_LOOPBACK_FAILED | \ + BNX2X_PHY_LOOPBACK_FAILED) + +#define STROM_ASSERT_ARRAY_SIZE 50 + +/* must be used on a CID before placing it on a HW ring */ +#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \ + (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \ + (x)) + +#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe)) +#define MAX_SP_DESC_CNT (SP_DESC_CNT - 1) + +#define BNX2X_BTR 4 +#define MAX_SPQ_PENDING 8 + +/* CMNG constants, as derived from system spec calculations */ +/* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */ +#define DEF_MIN_RATE 100 +/* resolution of the rate shaping timer - 400 usec */ +#define RS_PERIODIC_TIMEOUT_USEC 400 +/* number of bytes in single QM arbitration cycle - + * coefficient for calculating the fairness timer */ +#define QM_ARB_BYTES 160000 +/* resolution of Min algorithm 1:100 */ +#define MIN_RES 100 +/* how many bytes above threshold for the minimal credit of Min algorithm*/ +#define MIN_ABOVE_THRESH 32768 +/* Fairness algorithm integration time coefficient - + * for calculating the actual Tfair */ +#define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES) +/* Memory of fairness algorithm . 2 cycles */ +#define FAIR_MEM 2 + +#define ATTN_NIG_FOR_FUNC (1L << 8) +#define ATTN_SW_TIMER_4_FUNC (1L << 9) +#define GPIO_2_FUNC (1L << 10) +#define GPIO_3_FUNC (1L << 11) +#define GPIO_4_FUNC (1L << 12) +#define ATTN_GENERAL_ATTN_1 (1L << 13) +#define ATTN_GENERAL_ATTN_2 (1L << 14) +#define ATTN_GENERAL_ATTN_3 (1L << 15) +#define ATTN_GENERAL_ATTN_4 (1L << 13) +#define ATTN_GENERAL_ATTN_5 (1L << 14) +#define ATTN_GENERAL_ATTN_6 (1L << 15) + +#define ATTN_HARD_WIRED_MASK 0xff00 +#define ATTENTION_ID 4 + +#define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_PERSONALITY_ONLY(bp) || \ + IS_MF_FCOE_AFEX(bp)) + +/* stuff added to make the code fit 80Col */ + +#define BNX2X_PMF_LINK_ASSERT \ + GENERAL_ATTEN_OFFSET(LINK_SYNC_ATTENTION_BIT_FUNC_0 + BP_FUNC(bp)) + +#define BNX2X_MC_ASSERT_BITS \ + (GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \ + GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \ + GENERAL_ATTEN_OFFSET(CSTORM_FATAL_ASSERT_ATTENTION_BIT) | \ + GENERAL_ATTEN_OFFSET(XSTORM_FATAL_ASSERT_ATTENTION_BIT)) + +#define BNX2X_MCP_ASSERT \ + GENERAL_ATTEN_OFFSET(MCP_FATAL_ASSERT_ATTENTION_BIT) + +#define BNX2X_GRC_TIMEOUT GENERAL_ATTEN_OFFSET(LATCHED_ATTN_TIMEOUT_GRC) +#define BNX2X_GRC_RSV (GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCR) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCT) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCN) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCU) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC)) + +#define HW_INTERRUPT_ASSERT_SET_0 \ + (AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT) +#define HW_PRTY_ASSERT_SET_0 (AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR) +#define HW_INTERRUPT_ASSERT_SET_1 \ + (AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT) +#define HW_PRTY_ASSERT_SET_1 (AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR) +#define HW_INTERRUPT_ASSERT_SET_2 \ + (AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT |\ + AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT) +#define HW_PRTY_ASSERT_SET_2 (AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR) + +#define HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD \ + (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY) + +#define HW_PRTY_ASSERT_SET_3 (HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) + +#define HW_PRTY_ASSERT_SET_4 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR) + +#define MULTI_MASK 0x7f + +#define DEF_USB_FUNC_OFF offsetof(struct cstorm_def_status_block_u, func) +#define DEF_CSB_FUNC_OFF offsetof(struct cstorm_def_status_block_c, func) +#define DEF_XSB_FUNC_OFF offsetof(struct xstorm_def_status_block, func) +#define DEF_TSB_FUNC_OFF offsetof(struct tstorm_def_status_block, func) + +#define DEF_USB_IGU_INDEX_OFF \ + offsetof(struct cstorm_def_status_block_u, igu_index) +#define DEF_CSB_IGU_INDEX_OFF \ + offsetof(struct cstorm_def_status_block_c, igu_index) +#define DEF_XSB_IGU_INDEX_OFF \ + offsetof(struct xstorm_def_status_block, igu_index) +#define DEF_TSB_IGU_INDEX_OFF \ + offsetof(struct tstorm_def_status_block, igu_index) + +#define DEF_USB_SEGMENT_OFF \ + offsetof(struct cstorm_def_status_block_u, segment) +#define DEF_CSB_SEGMENT_OFF \ + offsetof(struct cstorm_def_status_block_c, segment) +#define DEF_XSB_SEGMENT_OFF \ + offsetof(struct xstorm_def_status_block, segment) +#define DEF_TSB_SEGMENT_OFF \ + offsetof(struct tstorm_def_status_block, segment) + +#define BNX2X_SP_DSB_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_ETH_DEF_CONS]) + +#define CAM_IS_INVALID(x) \ + (GET_FLAG(x.flags, \ + MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \ + (T_ETH_MAC_COMMAND_INVALIDATE)) + +/* Number of u32 elements in MC hash array */ +#define MC_HASH_SIZE 8 +#define MC_HASH_OFFSET(bp, i) (BAR_TSTRORM_INTMEM + \ + TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(BP_FUNC(bp)) + i*4) + +#ifndef PXP2_REG_PXP2_INT_STS +#define PXP2_REG_PXP2_INT_STS PXP2_REG_PXP2_INT_STS_0 +#endif + +#ifndef ETH_MAX_RX_CLIENTS_E2 +#define ETH_MAX_RX_CLIENTS_E2 ETH_MAX_RX_CLIENTS_E1H +#endif + +#define BNX2X_VPD_LEN 128 +#define VENDOR_ID_LEN 4 + +#define VF_ACQUIRE_THRESH 3 +#define VF_ACQUIRE_MAC_FILTERS 1 +#define VF_ACQUIRE_MC_FILTERS 10 +#define VF_ACQUIRE_VLAN_FILTERS 2 /* VLAN0 + 'real' VLAN */ + +#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \ + (!((me_reg) & ME_REG_VF_ERR))) +int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err); + +/* Congestion management fairness mode */ +#define CMNG_FNS_NONE 0 +#define CMNG_FNS_MINMAX 1 + +#define HC_SEG_ACCESS_DEF 0 /*Driver decision 0-3*/ +#define HC_SEG_ACCESS_ATTN 4 +#define HC_SEG_ACCESS_NORM 0 /*Driver decision 0-1*/ + +static const u32 dmae_reg_go_c[] = { + DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3, + DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7, + DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11, + DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15 +}; + +void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev); +void bnx2x_notify_link_changed(struct bnx2x *bp); + +#define BNX2X_MF_SD_PROTOCOL(bp) \ + ((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK) + +#define BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) \ + (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_ISCSI) + +#define BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) \ + (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_FCOE) + +#define IS_MF_ISCSI_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) +#define IS_MF_FCOE_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) +#define IS_MF_ISCSI_SI(bp) (IS_MF_SI(bp) && BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp)) + +#define IS_MF_ISCSI_ONLY(bp) (IS_MF_ISCSI_SD(bp) || IS_MF_ISCSI_SI(bp)) + +#define BNX2X_MF_EXT_PROTOCOL_MASK \ + (MACP_FUNC_CFG_FLAGS_ETHERNET | \ + MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD | \ + MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + +#define BNX2X_MF_EXT_PROT(bp) ((bp)->mf_ext_config & \ + BNX2X_MF_EXT_PROTOCOL_MASK) + +#define BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp) \ + (BNX2X_MF_EXT_PROT(bp) & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + +#define BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp) \ + (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + +#define BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) \ + (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) + +#define IS_MF_FCOE_AFEX(bp) \ + (IS_MF_AFEX(bp) && BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)) + +#define IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) \ + (IS_MF_SD(bp) && \ + (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \ + BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) + +#define IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp) \ + (IS_MF_SI(bp) && \ + (BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) || \ + BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp))) + +#define IS_MF_STORAGE_PERSONALITY_ONLY(bp) \ + (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) || \ + IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp)) + +/* Determines whether BW configuration arrives in 100Mb units or in + * percentages from actual physical link speed. + */ +#define IS_MF_PERCENT_BW(bp) (IS_MF_SI(bp) || IS_MF_UFP(bp) || IS_MF_BD(bp)) + +#define SET_FLAG(value, mask, flag) \ + do {\ + (value) &= ~(mask);\ + (value) |= ((flag) << (mask##_SHIFT));\ + } while (0) + +#define GET_FLAG(value, mask) \ + (((value) & (mask)) >> (mask##_SHIFT)) + +#define GET_FIELD(value, fname) \ + (((value) & (fname##_MASK)) >> (fname##_SHIFT)) + +enum { + SWITCH_UPDATE, + AFEX_UPDATE, +}; + +#define NUM_MACS 8 + +void bnx2x_set_local_cmng(struct bnx2x *bp); + +void bnx2x_update_mng_version(struct bnx2x *bp); + +void bnx2x_update_mfw_dump(struct bnx2x *bp); + +#define MCPR_SCRATCH_BASE(bp) \ + (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) + +#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX)) + +void bnx2x_init_ptp(struct bnx2x *bp); +int bnx2x_configure_ptp_filters(struct bnx2x *bp); +void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb); + +#define BNX2X_MAX_PHC_DRIFT 31000000 +#define BNX2X_PTP_TX_TIMEOUT + +/* Re-configure all previously configured vlan filters. + * Meant for implicit re-load flows. + */ +int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp); + +#endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c new file mode 100644 index 000000000..2610acf9a --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -0,0 +1,5129 @@ +/* bnx2x_cmn.c: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <linux/crash_dump.h> +#include <net/tcp.h> +#include <net/ipv6.h> +#include <net/ip6_checksum.h> +#include <net/busy_poll.h> +#include <linux/prefetch.h> +#include "bnx2x_cmn.h" +#include "bnx2x_init.h" +#include "bnx2x_sp.h" + +static void bnx2x_free_fp_mem_cnic(struct bnx2x *bp); +static int bnx2x_alloc_fp_mem_cnic(struct bnx2x *bp); +static int bnx2x_alloc_fp_mem(struct bnx2x *bp); +static int bnx2x_poll(struct napi_struct *napi, int budget); + +static void bnx2x_add_all_napi_cnic(struct bnx2x *bp) +{ + int i; + + /* Add NAPI objects */ + for_each_rx_queue_cnic(bp, i) { + netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), + bnx2x_poll, NAPI_POLL_WEIGHT); + } +} + +static void bnx2x_add_all_napi(struct bnx2x *bp) +{ + int i; + + /* Add NAPI objects */ + for_each_eth_queue(bp, i) { + netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), + bnx2x_poll, NAPI_POLL_WEIGHT); + } +} + +static int bnx2x_calc_num_queues(struct bnx2x *bp) +{ + int nq = bnx2x_num_queues ? : netif_get_num_default_rss_queues(); + + /* Reduce memory usage in kdump environment by using only one queue */ + if (is_kdump_kernel()) + nq = 1; + + nq = clamp(nq, 1, BNX2X_MAX_QUEUES(bp)); + return nq; +} + +/** + * bnx2x_move_fp - move content of the fastpath structure. + * + * @bp: driver handle + * @from: source FP index + * @to: destination FP index + * + * Makes sure the contents of the bp->fp[to].napi is kept + * intact. This is done by first copying the napi struct from + * the target to the source, and then mem copying the entire + * source onto the target. Update txdata pointers and related + * content. + */ +static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to) +{ + struct bnx2x_fastpath *from_fp = &bp->fp[from]; + struct bnx2x_fastpath *to_fp = &bp->fp[to]; + struct bnx2x_sp_objs *from_sp_objs = &bp->sp_objs[from]; + struct bnx2x_sp_objs *to_sp_objs = &bp->sp_objs[to]; + struct bnx2x_fp_stats *from_fp_stats = &bp->fp_stats[from]; + struct bnx2x_fp_stats *to_fp_stats = &bp->fp_stats[to]; + int old_max_eth_txqs, new_max_eth_txqs; + int old_txdata_index = 0, new_txdata_index = 0; + struct bnx2x_agg_info *old_tpa_info = to_fp->tpa_info; + + /* Copy the NAPI object as it has been already initialized */ + from_fp->napi = to_fp->napi; + + /* Move bnx2x_fastpath contents */ + memcpy(to_fp, from_fp, sizeof(*to_fp)); + to_fp->index = to; + + /* Retain the tpa_info of the original `to' version as we don't want + * 2 FPs to contain the same tpa_info pointer. + */ + to_fp->tpa_info = old_tpa_info; + + /* move sp_objs contents as well, as their indices match fp ones */ + memcpy(to_sp_objs, from_sp_objs, sizeof(*to_sp_objs)); + + /* move fp_stats contents as well, as their indices match fp ones */ + memcpy(to_fp_stats, from_fp_stats, sizeof(*to_fp_stats)); + + /* Update txdata pointers in fp and move txdata content accordingly: + * Each fp consumes 'max_cos' txdata structures, so the index should be + * decremented by max_cos x delta. + */ + + old_max_eth_txqs = BNX2X_NUM_ETH_QUEUES(bp) * (bp)->max_cos; + new_max_eth_txqs = (BNX2X_NUM_ETH_QUEUES(bp) - from + to) * + (bp)->max_cos; + if (from == FCOE_IDX(bp)) { + old_txdata_index = old_max_eth_txqs + FCOE_TXQ_IDX_OFFSET; + new_txdata_index = new_max_eth_txqs + FCOE_TXQ_IDX_OFFSET; + } + + memcpy(&bp->bnx2x_txq[new_txdata_index], + &bp->bnx2x_txq[old_txdata_index], + sizeof(struct bnx2x_fp_txdata)); + to_fp->txdata_ptr[0] = &bp->bnx2x_txq[new_txdata_index]; +} + +/** + * bnx2x_fill_fw_str - Fill buffer with FW version string. + * + * @bp: driver handle + * @buf: character buffer to fill with the fw name + * @buf_len: length of the above buffer + * + */ +void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len) +{ + if (IS_PF(bp)) { + u8 phy_fw_ver[PHY_FW_VER_LEN]; + + phy_fw_ver[0] = '\0'; + bnx2x_get_ext_phy_fw_version(&bp->link_params, + phy_fw_ver, PHY_FW_VER_LEN); + strlcpy(buf, bp->fw_ver, buf_len); + snprintf(buf + strlen(bp->fw_ver), 32 - strlen(bp->fw_ver), + "bc %d.%d.%d%s%s", + (bp->common.bc_ver & 0xff0000) >> 16, + (bp->common.bc_ver & 0xff00) >> 8, + (bp->common.bc_ver & 0xff), + ((phy_fw_ver[0] != '\0') ? " phy " : ""), phy_fw_ver); + } else { + bnx2x_vf_fill_fw_str(bp, buf, buf_len); + } +} + +/** + * bnx2x_shrink_eth_fp - guarantees fastpath structures stay intact + * + * @bp: driver handle + * @delta: number of eth queues which were not allocated + */ +static void bnx2x_shrink_eth_fp(struct bnx2x *bp, int delta) +{ + int i, cos, old_eth_num = BNX2X_NUM_ETH_QUEUES(bp); + + /* Queue pointer cannot be re-set on an fp-basis, as moving pointer + * backward along the array could cause memory to be overridden + */ + for (cos = 1; cos < bp->max_cos; cos++) { + for (i = 0; i < old_eth_num - delta; i++) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int new_idx = cos * (old_eth_num - delta) + i; + + memcpy(&bp->bnx2x_txq[new_idx], fp->txdata_ptr[cos], + sizeof(struct bnx2x_fp_txdata)); + fp->txdata_ptr[cos] = &bp->bnx2x_txq[new_idx]; + } + } +} + +int bnx2x_load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */ + +/* free skb in the packet ring at pos idx + * return idx of last bd freed + */ +static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, + u16 idx, unsigned int *pkts_compl, + unsigned int *bytes_compl) +{ + struct sw_tx_bd *tx_buf = &txdata->tx_buf_ring[idx]; + struct eth_tx_start_bd *tx_start_bd; + struct eth_tx_bd *tx_data_bd; + struct sk_buff *skb = tx_buf->skb; + u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons; + int nbd; + u16 split_bd_len = 0; + + /* prefetch skb end pointer to speedup dev_kfree_skb() */ + prefetch(&skb->end); + + DP(NETIF_MSG_TX_DONE, "fp[%d]: pkt_idx %d buff @(%p)->skb %p\n", + txdata->txq_index, idx, tx_buf, skb); + + tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd; + + nbd = le16_to_cpu(tx_start_bd->nbd) - 1; +#ifdef BNX2X_STOP_ON_ERROR + if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) { + BNX2X_ERR("BAD nbd!\n"); + bnx2x_panic(); + } +#endif + new_cons = nbd + tx_buf->first_bd; + + /* Get the next bd */ + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + + /* Skip a parse bd... */ + --nbd; + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + + if (tx_buf->flags & BNX2X_HAS_SECOND_PBD) { + /* Skip second parse bd... */ + --nbd; + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + } + + /* TSO headers+data bds share a common mapping. See bnx2x_tx_split() */ + if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) { + tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd; + split_bd_len = BD_UNMAP_LEN(tx_data_bd); + --nbd; + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + } + + /* unmap first bd */ + dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd), + BD_UNMAP_LEN(tx_start_bd) + split_bd_len, + DMA_TO_DEVICE); + + /* now free frags */ + while (nbd > 0) { + + tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd; + dma_unmap_page(&bp->pdev->dev, BD_UNMAP_ADDR(tx_data_bd), + BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE); + if (--nbd) + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + } + + /* release skb */ + WARN_ON(!skb); + if (likely(skb)) { + (*pkts_compl)++; + (*bytes_compl) += skb->len; + dev_kfree_skb_any(skb); + } + + tx_buf->first_bd = 0; + tx_buf->skb = NULL; + + return new_cons; +} + +int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata) +{ + struct netdev_queue *txq; + u16 hw_cons, sw_cons, bd_cons = txdata->tx_bd_cons; + unsigned int pkts_compl = 0, bytes_compl = 0; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return -1; +#endif + + txq = netdev_get_tx_queue(bp->dev, txdata->txq_index); + hw_cons = le16_to_cpu(*txdata->tx_cons_sb); + sw_cons = txdata->tx_pkt_cons; + + /* Ensure subsequent loads occur after hw_cons */ + smp_rmb(); + + while (sw_cons != hw_cons) { + u16 pkt_cons; + + pkt_cons = TX_BD(sw_cons); + + DP(NETIF_MSG_TX_DONE, + "queue[%d]: hw_cons %u sw_cons %u pkt_cons %u\n", + txdata->txq_index, hw_cons, sw_cons, pkt_cons); + + bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons, + &pkts_compl, &bytes_compl); + + sw_cons++; + } + + netdev_tx_completed_queue(txq, pkts_compl, bytes_compl); + + txdata->tx_pkt_cons = sw_cons; + txdata->tx_bd_cons = bd_cons; + + /* Need to make the tx_bd_cons update visible to start_xmit() + * before checking for netif_tx_queue_stopped(). Without the + * memory barrier, there is a small possibility that + * start_xmit() will miss it and cause the queue to be stopped + * forever. + * On the other hand we need an rmb() here to ensure the proper + * ordering of bit testing in the following + * netif_tx_queue_stopped(txq) call. + */ + smp_mb(); + + if (unlikely(netif_tx_queue_stopped(txq))) { + /* Taking tx_lock() is needed to prevent re-enabling the queue + * while it's empty. This could have happen if rx_action() gets + * suspended in bnx2x_tx_int() after the condition before + * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()): + * + * stops the queue->sees fresh tx_bd_cons->releases the queue-> + * sends some packets consuming the whole queue again-> + * stops the queue + */ + + __netif_tx_lock(txq, smp_processor_id()); + + if ((netif_tx_queue_stopped(txq)) && + (bp->state == BNX2X_STATE_OPEN) && + (bnx2x_tx_avail(bp, txdata) >= MAX_DESC_PER_TX_PKT)) + netif_tx_wake_queue(txq); + + __netif_tx_unlock(txq); + } + return 0; +} + +static inline void bnx2x_update_last_max_sge(struct bnx2x_fastpath *fp, + u16 idx) +{ + u16 last_max = fp->last_max_sge; + + if (SUB_S16(idx, last_max) > 0) + fp->last_max_sge = idx; +} + +static inline void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp, + u16 sge_len, + struct eth_end_agg_rx_cqe *cqe) +{ + struct bnx2x *bp = fp->bp; + u16 last_max, last_elem, first_elem; + u16 delta = 0; + u16 i; + + if (!sge_len) + return; + + /* First mark all used pages */ + for (i = 0; i < sge_len; i++) + BIT_VEC64_CLEAR_BIT(fp->sge_mask, + RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[i]))); + + DP(NETIF_MSG_RX_STATUS, "fp_cqe->sgl[%d] = %d\n", + sge_len - 1, le16_to_cpu(cqe->sgl_or_raw_data.sgl[sge_len - 1])); + + /* Here we assume that the last SGE index is the biggest */ + prefetch((void *)(fp->sge_mask)); + bnx2x_update_last_max_sge(fp, + le16_to_cpu(cqe->sgl_or_raw_data.sgl[sge_len - 1])); + + last_max = RX_SGE(fp->last_max_sge); + last_elem = last_max >> BIT_VEC64_ELEM_SHIFT; + first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT; + + /* If ring is not full */ + if (last_elem + 1 != first_elem) + last_elem++; + + /* Now update the prod */ + for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) { + if (likely(fp->sge_mask[i])) + break; + + fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK; + delta += BIT_VEC64_ELEM_SZ; + } + + if (delta > 0) { + fp->rx_sge_prod += delta; + /* clear page-end entries */ + bnx2x_clear_sge_mask_next_elems(fp); + } + + DP(NETIF_MSG_RX_STATUS, + "fp->last_max_sge = %d fp->rx_sge_prod = %d\n", + fp->last_max_sge, fp->rx_sge_prod); +} + +/* Get Toeplitz hash value in the skb using the value from the + * CQE (calculated by HW). + */ +static u32 bnx2x_get_rxhash(const struct bnx2x *bp, + const struct eth_fast_path_rx_cqe *cqe, + enum pkt_hash_types *rxhash_type) +{ + /* Get Toeplitz hash from CQE */ + if ((bp->dev->features & NETIF_F_RXHASH) && + (cqe->status_flags & ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG)) { + enum eth_rss_hash_type htype; + + htype = cqe->status_flags & ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE; + *rxhash_type = ((htype == TCP_IPV4_HASH_TYPE) || + (htype == TCP_IPV6_HASH_TYPE)) ? + PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3; + + return le32_to_cpu(cqe->rss_hash_result); + } + *rxhash_type = PKT_HASH_TYPE_NONE; + return 0; +} + +static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, + u16 cons, u16 prod, + struct eth_fast_path_rx_cqe *cqe) +{ + struct bnx2x *bp = fp->bp; + struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons]; + struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod]; + struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod]; + dma_addr_t mapping; + struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue]; + struct sw_rx_bd *first_buf = &tpa_info->first_buf; + + /* print error if current state != stop */ + if (tpa_info->tpa_state != BNX2X_TPA_STOP) + BNX2X_ERR("start of bin not in stop [%d]\n", queue); + + /* Try to map an empty data buffer from the aggregation info */ + mapping = dma_map_single(&bp->pdev->dev, + first_buf->data + NET_SKB_PAD, + fp->rx_buf_size, DMA_FROM_DEVICE); + /* + * ...if it fails - move the skb from the consumer to the producer + * and set the current aggregation state as ERROR to drop it + * when TPA_STOP arrives. + */ + + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + /* Move the BD from the consumer to the producer */ + bnx2x_reuse_rx_data(fp, cons, prod); + tpa_info->tpa_state = BNX2X_TPA_ERROR; + return; + } + + /* move empty data from pool to prod */ + prod_rx_buf->data = first_buf->data; + dma_unmap_addr_set(prod_rx_buf, mapping, mapping); + /* point prod_bd to new data */ + prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + + /* move partial skb from cons to pool (don't unmap yet) */ + *first_buf = *cons_rx_buf; + + /* mark bin state as START */ + tpa_info->parsing_flags = + le16_to_cpu(cqe->pars_flags.flags); + tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag); + tpa_info->tpa_state = BNX2X_TPA_START; + tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd); + tpa_info->placement_offset = cqe->placement_offset; + tpa_info->rxhash = bnx2x_get_rxhash(bp, cqe, &tpa_info->rxhash_type); + if (fp->mode == TPA_MODE_GRO) { + u16 gro_size = le16_to_cpu(cqe->pkt_len_or_gro_seg_len); + tpa_info->full_page = SGE_PAGES / gro_size * gro_size; + tpa_info->gro_size = gro_size; + } + +#ifdef BNX2X_STOP_ON_ERROR + fp->tpa_queue_used |= (1 << queue); + DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n", + fp->tpa_queue_used); +#endif +} + +/* Timestamp option length allowed for TPA aggregation: + * + * nop nop kind length echo val + */ +#define TPA_TSTAMP_OPT_LEN 12 +/** + * bnx2x_set_gro_params - compute GRO values + * + * @skb: packet skb + * @parsing_flags: parsing flags from the START CQE + * @len_on_bd: total length of the first packet for the + * aggregation. + * @pkt_len: length of all segments + * + * Approximate value of the MSS for this aggregation calculated using + * the first packet of it. + * Compute number of aggregated segments, and gso_type. + */ +static void bnx2x_set_gro_params(struct sk_buff *skb, u16 parsing_flags, + u16 len_on_bd, unsigned int pkt_len, + u16 num_of_coalesced_segs) +{ + /* TPA aggregation won't have either IP options or TCP options + * other than timestamp or IPv6 extension headers. + */ + u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr); + + if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == + PRS_FLAG_OVERETH_IPV6) { + hdrs_len += sizeof(struct ipv6hdr); + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + } else { + hdrs_len += sizeof(struct iphdr); + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + } + + /* Check if there was a TCP timestamp, if there is it's will + * always be 12 bytes length: nop nop kind length echo val. + * + * Otherwise FW would close the aggregation. + */ + if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG) + hdrs_len += TPA_TSTAMP_OPT_LEN; + + skb_shinfo(skb)->gso_size = len_on_bd - hdrs_len; + + /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count + * to skb_shinfo(skb)->gso_segs + */ + NAPI_GRO_CB(skb)->count = num_of_coalesced_segs; +} + +static int bnx2x_alloc_rx_sge(struct bnx2x *bp, struct bnx2x_fastpath *fp, + u16 index, gfp_t gfp_mask) +{ + struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; + struct eth_rx_sge *sge = &fp->rx_sge_ring[index]; + struct bnx2x_alloc_pool *pool = &fp->page_pool; + dma_addr_t mapping; + + if (!pool->page) { + pool->page = alloc_pages(gfp_mask, PAGES_PER_SGE_SHIFT); + if (unlikely(!pool->page)) + return -ENOMEM; + + pool->offset = 0; + } + + mapping = dma_map_page(&bp->pdev->dev, pool->page, + pool->offset, SGE_PAGE_SIZE, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + BNX2X_ERR("Can't map sge\n"); + return -ENOMEM; + } + + sw_buf->page = pool->page; + sw_buf->offset = pool->offset; + + dma_unmap_addr_set(sw_buf, mapping, mapping); + + sge->addr_hi = cpu_to_le32(U64_HI(mapping)); + sge->addr_lo = cpu_to_le32(U64_LO(mapping)); + + pool->offset += SGE_PAGE_SIZE; + if (PAGE_SIZE - pool->offset >= SGE_PAGE_SIZE) + get_page(pool->page); + else + pool->page = NULL; + return 0; +} + +static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct bnx2x_agg_info *tpa_info, + u16 pages, + struct sk_buff *skb, + struct eth_end_agg_rx_cqe *cqe, + u16 cqe_idx) +{ + struct sw_rx_page *rx_pg, old_rx_pg; + u32 i, frag_len, frag_size; + int err, j, frag_id = 0; + u16 len_on_bd = tpa_info->len_on_bd; + u16 full_page = 0, gro_size = 0; + + frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd; + + if (fp->mode == TPA_MODE_GRO) { + gro_size = tpa_info->gro_size; + full_page = tpa_info->full_page; + } + + /* This is needed in order to enable forwarding support */ + if (frag_size) + bnx2x_set_gro_params(skb, tpa_info->parsing_flags, len_on_bd, + le16_to_cpu(cqe->pkt_len), + le16_to_cpu(cqe->num_of_coalesced_segs)); + +#ifdef BNX2X_STOP_ON_ERROR + if (pages > min_t(u32, 8, MAX_SKB_FRAGS) * SGE_PAGES) { + BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n", + pages, cqe_idx); + BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len); + bnx2x_panic(); + return -EINVAL; + } +#endif + + /* Run through the SGL and compose the fragmented skb */ + for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) { + u16 sge_idx = RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[j])); + + /* FW gives the indices of the SGE as if the ring is an array + (meaning that "next" element will consume 2 indices) */ + if (fp->mode == TPA_MODE_GRO) + frag_len = min_t(u32, frag_size, (u32)full_page); + else /* LRO */ + frag_len = min_t(u32, frag_size, (u32)SGE_PAGES); + + rx_pg = &fp->rx_page_ring[sge_idx]; + old_rx_pg = *rx_pg; + + /* If we fail to allocate a substitute page, we simply stop + where we are and drop the whole packet */ + err = bnx2x_alloc_rx_sge(bp, fp, sge_idx, GFP_ATOMIC); + if (unlikely(err)) { + bnx2x_fp_qstats(bp, fp)->rx_skb_alloc_failed++; + return err; + } + + dma_unmap_page(&bp->pdev->dev, + dma_unmap_addr(&old_rx_pg, mapping), + SGE_PAGE_SIZE, DMA_FROM_DEVICE); + /* Add one frag and update the appropriate fields in the skb */ + if (fp->mode == TPA_MODE_LRO) + skb_fill_page_desc(skb, j, old_rx_pg.page, + old_rx_pg.offset, frag_len); + else { /* GRO */ + int rem; + int offset = 0; + for (rem = frag_len; rem > 0; rem -= gro_size) { + int len = rem > gro_size ? gro_size : rem; + skb_fill_page_desc(skb, frag_id++, + old_rx_pg.page, + old_rx_pg.offset + offset, + len); + if (offset) + get_page(old_rx_pg.page); + offset += len; + } + } + + skb->data_len += frag_len; + skb->truesize += SGE_PAGES; + skb->len += frag_len; + + frag_size -= frag_len; + } + + return 0; +} + +static void bnx2x_frag_free(const struct bnx2x_fastpath *fp, void *data) +{ + if (fp->rx_frag_size) + skb_free_frag(data); + else + kfree(data); +} + +static void *bnx2x_frag_alloc(const struct bnx2x_fastpath *fp, gfp_t gfp_mask) +{ + if (fp->rx_frag_size) { + /* GFP_KERNEL allocations are used only during initialization */ + if (unlikely(gfpflags_allow_blocking(gfp_mask))) + return (void *)__get_free_page(gfp_mask); + + return netdev_alloc_frag(fp->rx_frag_size); + } + + return kmalloc(fp->rx_buf_size + NET_SKB_PAD, gfp_mask); +} + +#ifdef CONFIG_INET +static void bnx2x_gro_ip_csum(struct bnx2x *bp, struct sk_buff *skb) +{ + const struct iphdr *iph = ip_hdr(skb); + struct tcphdr *th; + + skb_set_transport_header(skb, sizeof(struct iphdr)); + th = tcp_hdr(skb); + + th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb), + iph->saddr, iph->daddr, 0); +} + +static void bnx2x_gro_ipv6_csum(struct bnx2x *bp, struct sk_buff *skb) +{ + struct ipv6hdr *iph = ipv6_hdr(skb); + struct tcphdr *th; + + skb_set_transport_header(skb, sizeof(struct ipv6hdr)); + th = tcp_hdr(skb); + + th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb), + &iph->saddr, &iph->daddr, 0); +} + +static void bnx2x_gro_csum(struct bnx2x *bp, struct sk_buff *skb, + void (*gro_func)(struct bnx2x*, struct sk_buff*)) +{ + skb_reset_network_header(skb); + gro_func(bp, skb); + tcp_gro_complete(skb); +} +#endif + +static void bnx2x_gro_receive(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct sk_buff *skb) +{ +#ifdef CONFIG_INET + if (skb_shinfo(skb)->gso_size) { + switch (be16_to_cpu(skb->protocol)) { + case ETH_P_IP: + bnx2x_gro_csum(bp, skb, bnx2x_gro_ip_csum); + break; + case ETH_P_IPV6: + bnx2x_gro_csum(bp, skb, bnx2x_gro_ipv6_csum); + break; + default: + netdev_WARN_ONCE(bp->dev, + "Error: FW GRO supports only IPv4/IPv6, not 0x%04x\n", + be16_to_cpu(skb->protocol)); + } + } +#endif + skb_record_rx_queue(skb, fp->rx_queue); + napi_gro_receive(&fp->napi, skb); +} + +static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct bnx2x_agg_info *tpa_info, + u16 pages, + struct eth_end_agg_rx_cqe *cqe, + u16 cqe_idx) +{ + struct sw_rx_bd *rx_buf = &tpa_info->first_buf; + u8 pad = tpa_info->placement_offset; + u16 len = tpa_info->len_on_bd; + struct sk_buff *skb = NULL; + u8 *new_data, *data = rx_buf->data; + u8 old_tpa_state = tpa_info->tpa_state; + + tpa_info->tpa_state = BNX2X_TPA_STOP; + + /* If we there was an error during the handling of the TPA_START - + * drop this aggregation. + */ + if (old_tpa_state == BNX2X_TPA_ERROR) + goto drop; + + /* Try to allocate the new data */ + new_data = bnx2x_frag_alloc(fp, GFP_ATOMIC); + /* Unmap skb in the pool anyway, as we are going to change + pool entry status to BNX2X_TPA_STOP even if new skb allocation + fails. */ + dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping), + fp->rx_buf_size, DMA_FROM_DEVICE); + if (likely(new_data)) + skb = build_skb(data, fp->rx_frag_size); + + if (likely(skb)) { +#ifdef BNX2X_STOP_ON_ERROR + if (pad + len > fp->rx_buf_size) { + BNX2X_ERR("skb_put is about to fail... pad %d len %d rx_buf_size %d\n", + pad, len, fp->rx_buf_size); + bnx2x_panic(); + return; + } +#endif + + skb_reserve(skb, pad + NET_SKB_PAD); + skb_put(skb, len); + skb_set_hash(skb, tpa_info->rxhash, tpa_info->rxhash_type); + + skb->protocol = eth_type_trans(skb, bp->dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + if (!bnx2x_fill_frag_skb(bp, fp, tpa_info, pages, + skb, cqe, cqe_idx)) { + if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tpa_info->vlan_tag); + bnx2x_gro_receive(bp, fp, skb); + } else { + DP(NETIF_MSG_RX_STATUS, + "Failed to allocate new pages - dropping packet!\n"); + dev_kfree_skb_any(skb); + } + + /* put new data in bin */ + rx_buf->data = new_data; + + return; + } + if (new_data) + bnx2x_frag_free(fp, new_data); +drop: + /* drop the packet and keep the buffer in the bin */ + DP(NETIF_MSG_RX_STATUS, + "Failed to allocate or map a new skb - dropping packet!\n"); + bnx2x_fp_stats(bp, fp)->eth_q_stats.rx_skb_alloc_failed++; +} + +static int bnx2x_alloc_rx_data(struct bnx2x *bp, struct bnx2x_fastpath *fp, + u16 index, gfp_t gfp_mask) +{ + u8 *data; + struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[index]; + struct eth_rx_bd *rx_bd = &fp->rx_desc_ring[index]; + dma_addr_t mapping; + + data = bnx2x_frag_alloc(fp, gfp_mask); + if (unlikely(data == NULL)) + return -ENOMEM; + + mapping = dma_map_single(&bp->pdev->dev, data + NET_SKB_PAD, + fp->rx_buf_size, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + bnx2x_frag_free(fp, data); + BNX2X_ERR("Can't map rx data\n"); + return -ENOMEM; + } + + rx_buf->data = data; + dma_unmap_addr_set(rx_buf, mapping, mapping); + + rx_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + rx_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + + return 0; +} + +static +void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe, + struct bnx2x_fastpath *fp, + struct bnx2x_eth_q_stats *qstats) +{ + /* Do nothing if no L4 csum validation was done. + * We do not check whether IP csum was validated. For IPv4 we assume + * that if the card got as far as validating the L4 csum, it also + * validated the IP csum. IPv6 has no IP csum. + */ + if (cqe->fast_path_cqe.status_flags & + ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) + return; + + /* If L4 validation was done, check if an error was found. */ + + if (cqe->fast_path_cqe.type_error_flags & + (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | + ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) + qstats->hw_csum_err++; + else + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget) +{ + struct bnx2x *bp = fp->bp; + u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons; + u16 sw_comp_cons, sw_comp_prod; + int rx_pkt = 0; + union eth_rx_cqe *cqe; + struct eth_fast_path_rx_cqe *cqe_fp; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return 0; +#endif + if (budget <= 0) + return rx_pkt; + + bd_cons = fp->rx_bd_cons; + bd_prod = fp->rx_bd_prod; + bd_prod_fw = bd_prod; + sw_comp_cons = fp->rx_comp_cons; + sw_comp_prod = fp->rx_comp_prod; + + comp_ring_cons = RCQ_BD(sw_comp_cons); + cqe = &fp->rx_comp_ring[comp_ring_cons]; + cqe_fp = &cqe->fast_path_cqe; + + DP(NETIF_MSG_RX_STATUS, + "queue[%d]: sw_comp_cons %u\n", fp->index, sw_comp_cons); + + while (BNX2X_IS_CQE_COMPLETED(cqe_fp)) { + struct sw_rx_bd *rx_buf = NULL; + struct sk_buff *skb; + u8 cqe_fp_flags; + enum eth_rx_cqe_type cqe_fp_type; + u16 len, pad, queue; + u8 *data; + u32 rxhash; + enum pkt_hash_types rxhash_type; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return 0; +#endif + + bd_prod = RX_BD(bd_prod); + bd_cons = RX_BD(bd_cons); + + /* A rmb() is required to ensure that the CQE is not read + * before it is written by the adapter DMA. PCI ordering + * rules will make sure the other fields are written before + * the marker at the end of struct eth_fast_path_rx_cqe + * but without rmb() a weakly ordered processor can process + * stale data. Without the barrier TPA state-machine might + * enter inconsistent state and kernel stack might be + * provided with incorrect packet description - these lead + * to various kernel crashed. + */ + rmb(); + + cqe_fp_flags = cqe_fp->type_error_flags; + cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE; + + DP(NETIF_MSG_RX_STATUS, + "CQE type %x err %x status %x queue %x vlan %x len %u\n", + CQE_TYPE(cqe_fp_flags), + cqe_fp_flags, cqe_fp->status_flags, + le32_to_cpu(cqe_fp->rss_hash_result), + le16_to_cpu(cqe_fp->vlan_tag), + le16_to_cpu(cqe_fp->pkt_len_or_gro_seg_len)); + + /* is this a slowpath msg? */ + if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) { + bnx2x_sp_event(fp, cqe); + goto next_cqe; + } + + rx_buf = &fp->rx_buf_ring[bd_cons]; + data = rx_buf->data; + + if (!CQE_TYPE_FAST(cqe_fp_type)) { + struct bnx2x_agg_info *tpa_info; + u16 frag_size, pages; +#ifdef BNX2X_STOP_ON_ERROR + /* sanity check */ + if (fp->mode == TPA_MODE_DISABLED && + (CQE_TYPE_START(cqe_fp_type) || + CQE_TYPE_STOP(cqe_fp_type))) + BNX2X_ERR("START/STOP packet while TPA disabled, type %x\n", + CQE_TYPE(cqe_fp_type)); +#endif + + if (CQE_TYPE_START(cqe_fp_type)) { + u16 queue = cqe_fp->queue_index; + DP(NETIF_MSG_RX_STATUS, + "calling tpa_start on queue %d\n", + queue); + + bnx2x_tpa_start(fp, queue, + bd_cons, bd_prod, + cqe_fp); + + goto next_rx; + } + queue = cqe->end_agg_cqe.queue_index; + tpa_info = &fp->tpa_info[queue]; + DP(NETIF_MSG_RX_STATUS, + "calling tpa_stop on queue %d\n", + queue); + + frag_size = le16_to_cpu(cqe->end_agg_cqe.pkt_len) - + tpa_info->len_on_bd; + + if (fp->mode == TPA_MODE_GRO) + pages = (frag_size + tpa_info->full_page - 1) / + tpa_info->full_page; + else + pages = SGE_PAGE_ALIGN(frag_size) >> + SGE_PAGE_SHIFT; + + bnx2x_tpa_stop(bp, fp, tpa_info, pages, + &cqe->end_agg_cqe, comp_ring_cons); +#ifdef BNX2X_STOP_ON_ERROR + if (bp->panic) + return 0; +#endif + + bnx2x_update_sge_prod(fp, pages, &cqe->end_agg_cqe); + goto next_cqe; + } + /* non TPA */ + len = le16_to_cpu(cqe_fp->pkt_len_or_gro_seg_len); + pad = cqe_fp->placement_offset; + dma_sync_single_for_cpu(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + pad + RX_COPY_THRESH, + DMA_FROM_DEVICE); + pad += NET_SKB_PAD; + prefetch(data + pad); /* speedup eth_type_trans() */ + /* is this an error packet? */ + if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) { + DP(NETIF_MSG_RX_ERR | NETIF_MSG_RX_STATUS, + "ERROR flags %x rx packet %u\n", + cqe_fp_flags, sw_comp_cons); + bnx2x_fp_qstats(bp, fp)->rx_err_discard_pkt++; + goto reuse_rx; + } + + /* Since we don't have a jumbo ring + * copy small packets if mtu > 1500 + */ + if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) && + (len <= RX_COPY_THRESH)) { + skb = napi_alloc_skb(&fp->napi, len); + if (skb == NULL) { + DP(NETIF_MSG_RX_ERR | NETIF_MSG_RX_STATUS, + "ERROR packet dropped because of alloc failure\n"); + bnx2x_fp_qstats(bp, fp)->rx_skb_alloc_failed++; + goto reuse_rx; + } + memcpy(skb->data, data + pad, len); + bnx2x_reuse_rx_data(fp, bd_cons, bd_prod); + } else { + if (likely(bnx2x_alloc_rx_data(bp, fp, bd_prod, + GFP_ATOMIC) == 0)) { + dma_unmap_single(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + fp->rx_buf_size, + DMA_FROM_DEVICE); + skb = build_skb(data, fp->rx_frag_size); + if (unlikely(!skb)) { + bnx2x_frag_free(fp, data); + bnx2x_fp_qstats(bp, fp)-> + rx_skb_alloc_failed++; + goto next_rx; + } + skb_reserve(skb, pad); + } else { + DP(NETIF_MSG_RX_ERR | NETIF_MSG_RX_STATUS, + "ERROR packet dropped because of alloc failure\n"); + bnx2x_fp_qstats(bp, fp)->rx_skb_alloc_failed++; +reuse_rx: + bnx2x_reuse_rx_data(fp, bd_cons, bd_prod); + goto next_rx; + } + } + + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, bp->dev); + + /* Set Toeplitz hash for a none-LRO skb */ + rxhash = bnx2x_get_rxhash(bp, cqe_fp, &rxhash_type); + skb_set_hash(skb, rxhash, rxhash_type); + + skb_checksum_none_assert(skb); + + if (bp->dev->features & NETIF_F_RXCSUM) + bnx2x_csum_validate(skb, cqe, fp, + bnx2x_fp_qstats(bp, fp)); + + skb_record_rx_queue(skb, fp->rx_queue); + + /* Check if this packet was timestamped */ + if (unlikely(cqe->fast_path_cqe.type_error_flags & + (1 << ETH_FAST_PATH_RX_CQE_PTP_PKT_SHIFT))) + bnx2x_set_rx_ts(bp, skb); + + if (le16_to_cpu(cqe_fp->pars_flags.flags) & + PARSING_FLAGS_VLAN) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + le16_to_cpu(cqe_fp->vlan_tag)); + + napi_gro_receive(&fp->napi, skb); +next_rx: + rx_buf->data = NULL; + + bd_cons = NEXT_RX_IDX(bd_cons); + bd_prod = NEXT_RX_IDX(bd_prod); + bd_prod_fw = NEXT_RX_IDX(bd_prod_fw); + rx_pkt++; +next_cqe: + sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod); + sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons); + + /* mark CQE as free */ + BNX2X_SEED_CQE(cqe_fp); + + if (rx_pkt == budget) + break; + + comp_ring_cons = RCQ_BD(sw_comp_cons); + cqe = &fp->rx_comp_ring[comp_ring_cons]; + cqe_fp = &cqe->fast_path_cqe; + } /* while */ + + fp->rx_bd_cons = bd_cons; + fp->rx_bd_prod = bd_prod_fw; + fp->rx_comp_cons = sw_comp_cons; + fp->rx_comp_prod = sw_comp_prod; + + /* Update producers */ + bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod, + fp->rx_sge_prod); + + return rx_pkt; +} + +static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie) +{ + struct bnx2x_fastpath *fp = fp_cookie; + struct bnx2x *bp = fp->bp; + u8 cos; + + DP(NETIF_MSG_INTR, + "got an MSI-X interrupt on IDX:SB [fp %d fw_sd %d igusb %d]\n", + fp->index, fp->fw_sb_id, fp->igu_sb_id); + + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + /* Handle Rx and Tx according to MSI-X vector */ + for_each_cos_in_tx_queue(fp, cos) + prefetch(fp->txdata_ptr[cos]->tx_cons_sb); + + prefetch(&fp->sb_running_index[SM_RX_ID]); + napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi)); + + return IRQ_HANDLED; +} + +/* HW Lock for shared dual port PHYs */ +void bnx2x_acquire_phy_lock(struct bnx2x *bp) +{ + mutex_lock(&bp->port.phy_mutex); + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO); +} + +void bnx2x_release_phy_lock(struct bnx2x *bp) +{ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO); + + mutex_unlock(&bp->port.phy_mutex); +} + +/* calculates MF speed according to current linespeed and MF configuration */ +u16 bnx2x_get_mf_speed(struct bnx2x *bp) +{ + u16 line_speed = bp->link_vars.line_speed; + if (IS_MF(bp)) { + u16 maxCfg = bnx2x_extract_max_cfg(bp, + bp->mf_config[BP_VN(bp)]); + + /* Calculate the current MAX line speed limit for the MF + * devices + */ + if (IS_MF_PERCENT_BW(bp)) + line_speed = (line_speed * maxCfg) / 100; + else { /* SD mode */ + u16 vn_max_rate = maxCfg * 100; + + if (vn_max_rate < line_speed) + line_speed = vn_max_rate; + } + } + + return line_speed; +} + +/** + * bnx2x_fill_report_data - fill link report data to report + * + * @bp: driver handle + * @data: link state to update + * + * It uses a none-atomic bit operations because is called under the mutex. + */ +static void bnx2x_fill_report_data(struct bnx2x *bp, + struct bnx2x_link_report_data *data) +{ + memset(data, 0, sizeof(*data)); + + if (IS_PF(bp)) { + /* Fill the report data: effective line speed */ + data->line_speed = bnx2x_get_mf_speed(bp); + + /* Link is down */ + if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS)) + __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &data->link_report_flags); + + if (!BNX2X_NUM_ETH_QUEUES(bp)) + __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &data->link_report_flags); + + /* Full DUPLEX */ + if (bp->link_vars.duplex == DUPLEX_FULL) + __set_bit(BNX2X_LINK_REPORT_FD, + &data->link_report_flags); + + /* Rx Flow Control is ON */ + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) + __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, + &data->link_report_flags); + + /* Tx Flow Control is ON */ + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) + __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, + &data->link_report_flags); + } else { /* VF */ + *data = bp->vf_link_vars; + } +} + +/** + * bnx2x_link_report - report link status to OS. + * + * @bp: driver handle + * + * Calls the __bnx2x_link_report() under the same locking scheme + * as a link/PHY state managing code to ensure a consistent link + * reporting. + */ + +void bnx2x_link_report(struct bnx2x *bp) +{ + bnx2x_acquire_phy_lock(bp); + __bnx2x_link_report(bp); + bnx2x_release_phy_lock(bp); +} + +/** + * __bnx2x_link_report - report link status to OS. + * + * @bp: driver handle + * + * None atomic implementation. + * Should be called under the phy_lock. + */ +void __bnx2x_link_report(struct bnx2x *bp) +{ + struct bnx2x_link_report_data cur_data; + + if (bp->force_link_down) { + bp->link_vars.link_up = 0; + return; + } + + /* reread mf_cfg */ + if (IS_PF(bp) && !CHIP_IS_E1(bp)) + bnx2x_read_mf_cfg(bp); + + /* Read the current link report info */ + bnx2x_fill_report_data(bp, &cur_data); + + /* Don't report link down or exactly the same link status twice */ + if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) || + (test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &bp->last_reported_link.link_report_flags) && + test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &cur_data.link_report_flags))) + return; + + bp->link_cnt++; + + /* We are going to report a new link parameters now - + * remember the current data for the next time. + */ + memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data)); + + /* propagate status to VFs */ + if (IS_PF(bp)) + bnx2x_iov_link_update(bp); + + if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &cur_data.link_report_flags)) { + netif_carrier_off(bp->dev); + netdev_err(bp->dev, "NIC Link is Down\n"); + return; + } else { + const char *duplex; + const char *flow; + + netif_carrier_on(bp->dev); + + if (test_and_clear_bit(BNX2X_LINK_REPORT_FD, + &cur_data.link_report_flags)) + duplex = "full"; + else + duplex = "half"; + + /* Handle the FC at the end so that only these flags would be + * possibly set. This way we may easily check if there is no FC + * enabled. + */ + if (cur_data.link_report_flags) { + if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON, + &cur_data.link_report_flags)) { + if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON, + &cur_data.link_report_flags)) + flow = "ON - receive & transmit"; + else + flow = "ON - receive"; + } else { + flow = "ON - transmit"; + } + } else { + flow = "none"; + } + netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n", + cur_data.line_speed, duplex, flow); + } +} + +static void bnx2x_set_next_page_sgl(struct bnx2x_fastpath *fp) +{ + int i; + + for (i = 1; i <= NUM_RX_SGE_PAGES; i++) { + struct eth_rx_sge *sge; + + sge = &fp->rx_sge_ring[RX_SGE_CNT * i - 2]; + sge->addr_hi = + cpu_to_le32(U64_HI(fp->rx_sge_mapping + + BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES))); + + sge->addr_lo = + cpu_to_le32(U64_LO(fp->rx_sge_mapping + + BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES))); + } +} + +static void bnx2x_free_tpa_pool(struct bnx2x *bp, + struct bnx2x_fastpath *fp, int last) +{ + int i; + + for (i = 0; i < last; i++) { + struct bnx2x_agg_info *tpa_info = &fp->tpa_info[i]; + struct sw_rx_bd *first_buf = &tpa_info->first_buf; + u8 *data = first_buf->data; + + if (data == NULL) { + DP(NETIF_MSG_IFDOWN, "tpa bin %d empty on free\n", i); + continue; + } + if (tpa_info->tpa_state == BNX2X_TPA_START) + dma_unmap_single(&bp->pdev->dev, + dma_unmap_addr(first_buf, mapping), + fp->rx_buf_size, DMA_FROM_DEVICE); + bnx2x_frag_free(fp, data); + first_buf->data = NULL; + } +} + +void bnx2x_init_rx_rings_cnic(struct bnx2x *bp) +{ + int j; + + for_each_rx_queue_cnic(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + fp->rx_bd_cons = 0; + + /* Activate BD ring */ + /* Warning! + * this will generate an interrupt (to the TSTORM) + * must only be done after chip is initialized + */ + bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod, + fp->rx_sge_prod); + } +} + +void bnx2x_init_rx_rings(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + u16 ring_prod; + int i, j; + + /* Allocate TPA resources */ + for_each_eth_queue(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + DP(NETIF_MSG_IFUP, + "mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size); + + if (fp->mode != TPA_MODE_DISABLED) { + /* Fill the per-aggregation pool */ + for (i = 0; i < MAX_AGG_QS(bp); i++) { + struct bnx2x_agg_info *tpa_info = + &fp->tpa_info[i]; + struct sw_rx_bd *first_buf = + &tpa_info->first_buf; + + first_buf->data = + bnx2x_frag_alloc(fp, GFP_KERNEL); + if (!first_buf->data) { + BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n", + j); + bnx2x_free_tpa_pool(bp, fp, i); + fp->mode = TPA_MODE_DISABLED; + break; + } + dma_unmap_addr_set(first_buf, mapping, 0); + tpa_info->tpa_state = BNX2X_TPA_STOP; + } + + /* "next page" elements initialization */ + bnx2x_set_next_page_sgl(fp); + + /* set SGEs bit mask */ + bnx2x_init_sge_ring_bit_mask(fp); + + /* Allocate SGEs and initialize the ring elements */ + for (i = 0, ring_prod = 0; + i < MAX_RX_SGE_CNT*NUM_RX_SGE_PAGES; i++) { + + if (bnx2x_alloc_rx_sge(bp, fp, ring_prod, + GFP_KERNEL) < 0) { + BNX2X_ERR("was only able to allocate %d rx sges\n", + i); + BNX2X_ERR("disabling TPA for queue[%d]\n", + j); + /* Cleanup already allocated elements */ + bnx2x_free_rx_sge_range(bp, fp, + ring_prod); + bnx2x_free_tpa_pool(bp, fp, + MAX_AGG_QS(bp)); + fp->mode = TPA_MODE_DISABLED; + ring_prod = 0; + break; + } + ring_prod = NEXT_SGE_IDX(ring_prod); + } + + fp->rx_sge_prod = ring_prod; + } + } + + for_each_eth_queue(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + fp->rx_bd_cons = 0; + + /* Activate BD ring */ + /* Warning! + * this will generate an interrupt (to the TSTORM) + * must only be done after chip is initialized + */ + bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod, + fp->rx_sge_prod); + + if (j != 0) + continue; + + if (CHIP_IS_E1(bp)) { + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func), + U64_LO(fp->rx_comp_mapping)); + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4, + U64_HI(fp->rx_comp_mapping)); + } + } +} + +static void bnx2x_free_tx_skbs_queue(struct bnx2x_fastpath *fp) +{ + u8 cos; + struct bnx2x *bp = fp->bp; + + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; + unsigned pkts_compl = 0, bytes_compl = 0; + + u16 sw_prod = txdata->tx_pkt_prod; + u16 sw_cons = txdata->tx_pkt_cons; + + while (sw_cons != sw_prod) { + bnx2x_free_tx_pkt(bp, txdata, TX_BD(sw_cons), + &pkts_compl, &bytes_compl); + sw_cons++; + } + + netdev_tx_reset_queue( + netdev_get_tx_queue(bp->dev, + txdata->txq_index)); + } +} + +static void bnx2x_free_tx_skbs_cnic(struct bnx2x *bp) +{ + int i; + + for_each_tx_queue_cnic(bp, i) { + bnx2x_free_tx_skbs_queue(&bp->fp[i]); + } +} + +static void bnx2x_free_tx_skbs(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) { + bnx2x_free_tx_skbs_queue(&bp->fp[i]); + } +} + +static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp) +{ + struct bnx2x *bp = fp->bp; + int i; + + /* ring wasn't allocated */ + if (fp->rx_buf_ring == NULL) + return; + + for (i = 0; i < NUM_RX_BD; i++) { + struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i]; + u8 *data = rx_buf->data; + + if (data == NULL) + continue; + dma_unmap_single(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + fp->rx_buf_size, DMA_FROM_DEVICE); + + rx_buf->data = NULL; + bnx2x_frag_free(fp, data); + } +} + +static void bnx2x_free_rx_skbs_cnic(struct bnx2x *bp) +{ + int j; + + for_each_rx_queue_cnic(bp, j) { + bnx2x_free_rx_bds(&bp->fp[j]); + } +} + +static void bnx2x_free_rx_skbs(struct bnx2x *bp) +{ + int j; + + for_each_eth_queue(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + bnx2x_free_rx_bds(fp); + + if (fp->mode != TPA_MODE_DISABLED) + bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp)); + } +} + +static void bnx2x_free_skbs_cnic(struct bnx2x *bp) +{ + bnx2x_free_tx_skbs_cnic(bp); + bnx2x_free_rx_skbs_cnic(bp); +} + +void bnx2x_free_skbs(struct bnx2x *bp) +{ + bnx2x_free_tx_skbs(bp); + bnx2x_free_rx_skbs(bp); +} + +void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value) +{ + /* load old values */ + u32 mf_cfg = bp->mf_config[BP_VN(bp)]; + + if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) { + /* leave all but MAX value */ + mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK; + + /* set new MAX value */ + mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT) + & FUNC_MF_CFG_MAX_BW_MASK; + + bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg); + } +} + +/** + * bnx2x_free_msix_irqs - free previously requested MSI-X IRQ vectors + * + * @bp: driver handle + * @nvecs: number of vectors to be released + */ +static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs) +{ + int i, offset = 0; + + if (nvecs == offset) + return; + + /* VFs don't have a default SB */ + if (IS_PF(bp)) { + free_irq(bp->msix_table[offset].vector, bp->dev); + DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", + bp->msix_table[offset].vector); + offset++; + } + + if (CNIC_SUPPORT(bp)) { + if (nvecs == offset) + return; + offset++; + } + + for_each_eth_queue(bp, i) { + if (nvecs == offset) + return; + DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq\n", + i, bp->msix_table[offset].vector); + + free_irq(bp->msix_table[offset++].vector, &bp->fp[i]); + } +} + +void bnx2x_free_irq(struct bnx2x *bp) +{ + if (bp->flags & USING_MSIX_FLAG && + !(bp->flags & USING_SINGLE_MSIX_FLAG)) { + int nvecs = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp); + + /* vfs don't have a default status block */ + if (IS_PF(bp)) + nvecs++; + + bnx2x_free_msix_irqs(bp, nvecs); + } else { + free_irq(bp->dev->irq, bp->dev); + } +} + +int bnx2x_enable_msix(struct bnx2x *bp) +{ + int msix_vec = 0, i, rc; + + /* VFs don't have a default status block */ + if (IS_PF(bp)) { + bp->msix_table[msix_vec].entry = msix_vec; + BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n", + bp->msix_table[0].entry); + msix_vec++; + } + + /* Cnic requires an msix vector for itself */ + if (CNIC_SUPPORT(bp)) { + bp->msix_table[msix_vec].entry = msix_vec; + BNX2X_DEV_INFO("msix_table[%d].entry = %d (CNIC)\n", + msix_vec, bp->msix_table[msix_vec].entry); + msix_vec++; + } + + /* We need separate vectors for ETH queues only (not FCoE) */ + for_each_eth_queue(bp, i) { + bp->msix_table[msix_vec].entry = msix_vec; + BNX2X_DEV_INFO("msix_table[%d].entry = %d (fastpath #%u)\n", + msix_vec, msix_vec, i); + msix_vec++; + } + + DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors\n", + msix_vec); + + rc = pci_enable_msix_range(bp->pdev, &bp->msix_table[0], + BNX2X_MIN_MSIX_VEC_CNT(bp), msix_vec); + /* + * reconfigure number of tx/rx queues according to available + * MSI-X vectors + */ + if (rc == -ENOSPC) { + /* Get by with single vector */ + rc = pci_enable_msix_range(bp->pdev, &bp->msix_table[0], 1, 1); + if (rc < 0) { + BNX2X_DEV_INFO("Single MSI-X is not attainable rc %d\n", + rc); + goto no_msix; + } + + BNX2X_DEV_INFO("Using single MSI-X vector\n"); + bp->flags |= USING_SINGLE_MSIX_FLAG; + + BNX2X_DEV_INFO("set number of queues to 1\n"); + bp->num_ethernet_queues = 1; + bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; + } else if (rc < 0) { + BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc); + goto no_msix; + } else if (rc < msix_vec) { + /* how less vectors we will have? */ + int diff = msix_vec - rc; + + BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc); + + /* + * decrease number of queues by number of unallocated entries + */ + bp->num_ethernet_queues -= diff; + bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; + + BNX2X_DEV_INFO("New queue configuration set: %d\n", + bp->num_queues); + } + + bp->flags |= USING_MSIX_FLAG; + + return 0; + +no_msix: + /* fall to INTx if not enough memory */ + if (rc == -ENOMEM) + bp->flags |= DISABLE_MSI_FLAG; + + return rc; +} + +static int bnx2x_req_msix_irqs(struct bnx2x *bp) +{ + int i, rc, offset = 0; + + /* no default status block for vf */ + if (IS_PF(bp)) { + rc = request_irq(bp->msix_table[offset++].vector, + bnx2x_msix_sp_int, 0, + bp->dev->name, bp->dev); + if (rc) { + BNX2X_ERR("request sp irq failed\n"); + return -EBUSY; + } + } + + if (CNIC_SUPPORT(bp)) + offset++; + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + snprintf(fp->name, sizeof(fp->name), "%s-fp-%d", + bp->dev->name, i); + + rc = request_irq(bp->msix_table[offset].vector, + bnx2x_msix_fp_int, 0, fp->name, fp); + if (rc) { + BNX2X_ERR("request fp #%d irq (%d) failed rc %d\n", i, + bp->msix_table[offset].vector, rc); + bnx2x_free_msix_irqs(bp, offset); + return -EBUSY; + } + + offset++; + } + + i = BNX2X_NUM_ETH_QUEUES(bp); + if (IS_PF(bp)) { + offset = 1 + CNIC_SUPPORT(bp); + netdev_info(bp->dev, + "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n", + bp->msix_table[0].vector, + 0, bp->msix_table[offset].vector, + i - 1, bp->msix_table[offset + i - 1].vector); + } else { + offset = CNIC_SUPPORT(bp); + netdev_info(bp->dev, + "using MSI-X IRQs: fp[%d] %d ... fp[%d] %d\n", + 0, bp->msix_table[offset].vector, + i - 1, bp->msix_table[offset + i - 1].vector); + } + return 0; +} + +int bnx2x_enable_msi(struct bnx2x *bp) +{ + int rc; + + rc = pci_enable_msi(bp->pdev); + if (rc) { + BNX2X_DEV_INFO("MSI is not attainable\n"); + return -1; + } + bp->flags |= USING_MSI_FLAG; + + return 0; +} + +static int bnx2x_req_irq(struct bnx2x *bp) +{ + unsigned long flags; + unsigned int irq; + + if (bp->flags & (USING_MSI_FLAG | USING_MSIX_FLAG)) + flags = 0; + else + flags = IRQF_SHARED; + + if (bp->flags & USING_MSIX_FLAG) + irq = bp->msix_table[0].vector; + else + irq = bp->pdev->irq; + + return request_irq(irq, bnx2x_interrupt, flags, bp->dev->name, bp->dev); +} + +static int bnx2x_setup_irqs(struct bnx2x *bp) +{ + int rc = 0; + if (bp->flags & USING_MSIX_FLAG && + !(bp->flags & USING_SINGLE_MSIX_FLAG)) { + rc = bnx2x_req_msix_irqs(bp); + if (rc) + return rc; + } else { + rc = bnx2x_req_irq(bp); + if (rc) { + BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc); + return rc; + } + if (bp->flags & USING_MSI_FLAG) { + bp->dev->irq = bp->pdev->irq; + netdev_info(bp->dev, "using MSI IRQ %d\n", + bp->dev->irq); + } + if (bp->flags & USING_MSIX_FLAG) { + bp->dev->irq = bp->msix_table[0].vector; + netdev_info(bp->dev, "using MSIX IRQ %d\n", + bp->dev->irq); + } + } + + return 0; +} + +static void bnx2x_napi_enable_cnic(struct bnx2x *bp) +{ + int i; + + for_each_rx_queue_cnic(bp, i) { + napi_enable(&bnx2x_fp(bp, i, napi)); + } +} + +static void bnx2x_napi_enable(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) { + napi_enable(&bnx2x_fp(bp, i, napi)); + } +} + +static void bnx2x_napi_disable_cnic(struct bnx2x *bp) +{ + int i; + + for_each_rx_queue_cnic(bp, i) { + napi_disable(&bnx2x_fp(bp, i, napi)); + } +} + +static void bnx2x_napi_disable(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) { + napi_disable(&bnx2x_fp(bp, i, napi)); + } +} + +void bnx2x_netif_start(struct bnx2x *bp) +{ + if (netif_running(bp->dev)) { + bnx2x_napi_enable(bp); + if (CNIC_LOADED(bp)) + bnx2x_napi_enable_cnic(bp); + bnx2x_int_enable(bp); + if (bp->state == BNX2X_STATE_OPEN) + netif_tx_wake_all_queues(bp->dev); + } +} + +void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) +{ + bnx2x_int_disable_sync(bp, disable_hw); + bnx2x_napi_disable(bp); + if (CNIC_LOADED(bp)) + bnx2x_napi_disable_cnic(bp); +} + +u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, + struct net_device *sb_dev, + select_queue_fallback_t fallback) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (CNIC_LOADED(bp) && !NO_FCOE(bp)) { + struct ethhdr *hdr = (struct ethhdr *)skb->data; + u16 ether_type = ntohs(hdr->h_proto); + + /* Skip VLAN tag if present */ + if (ether_type == ETH_P_8021Q) { + struct vlan_ethhdr *vhdr = + (struct vlan_ethhdr *)skb->data; + + ether_type = ntohs(vhdr->h_vlan_encapsulated_proto); + } + + /* If ethertype is FCoE or FIP - use FCoE ring */ + if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP)) + return bnx2x_fcoe_tx(bp, txq_index); + } + + /* select a non-FCoE queue */ + return fallback(dev, skb, NULL) % (BNX2X_NUM_ETH_QUEUES(bp)); +} + +void bnx2x_set_num_queues(struct bnx2x *bp) +{ + /* RSS queues */ + bp->num_ethernet_queues = bnx2x_calc_num_queues(bp); + + /* override in STORAGE SD modes */ + if (IS_MF_STORAGE_ONLY(bp)) + bp->num_ethernet_queues = 1; + + /* Add special queues */ + bp->num_cnic_queues = CNIC_SUPPORT(bp); /* For FCOE */ + bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; + + BNX2X_DEV_INFO("set number of queues to %d\n", bp->num_queues); +} + +/** + * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues + * + * @bp: Driver handle + * + * We currently support for at most 16 Tx queues for each CoS thus we will + * allocate a multiple of 16 for ETH L2 rings according to the value of the + * bp->max_cos. + * + * If there is an FCoE L2 queue the appropriate Tx queue will have the next + * index after all ETH L2 indices. + * + * If the actual number of Tx queues (for each CoS) is less than 16 then there + * will be the holes at the end of each group of 16 ETh L2 indices (0..15, + * 16..31,...) with indices that are not coupled with any real Tx queue. + * + * The proper configuration of skb->queue_mapping is handled by + * bnx2x_select_queue() and __skb_tx_hash(). + * + * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash() + * will return a proper Tx index if TC is enabled (netdev->num_tc > 0). + */ +static int bnx2x_set_real_num_queues(struct bnx2x *bp, int include_cnic) +{ + int rc, tx, rx; + + tx = BNX2X_NUM_ETH_QUEUES(bp) * bp->max_cos; + rx = BNX2X_NUM_ETH_QUEUES(bp); + +/* account for fcoe queue */ + if (include_cnic && !NO_FCOE(bp)) { + rx++; + tx++; + } + + rc = netif_set_real_num_tx_queues(bp->dev, tx); + if (rc) { + BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc); + return rc; + } + rc = netif_set_real_num_rx_queues(bp->dev, rx); + if (rc) { + BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc); + return rc; + } + + DP(NETIF_MSG_IFUP, "Setting real num queues to (tx, rx) (%d, %d)\n", + tx, rx); + + return rc; +} + +static void bnx2x_set_rx_buf_size(struct bnx2x *bp) +{ + int i; + + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + u32 mtu; + + /* Always use a mini-jumbo MTU for the FCoE L2 ring */ + if (IS_FCOE_IDX(i)) + /* + * Although there are no IP frames expected to arrive to + * this ring we still want to add an + * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer + * overrun attack. + */ + mtu = BNX2X_FCOE_MINI_JUMBO_MTU; + else + mtu = bp->dev->mtu; + fp->rx_buf_size = BNX2X_FW_RX_ALIGN_START + + IP_HEADER_ALIGNMENT_PADDING + + ETH_OVERHEAD + + mtu + + BNX2X_FW_RX_ALIGN_END; + fp->rx_buf_size = SKB_DATA_ALIGN(fp->rx_buf_size); + /* Note : rx_buf_size doesn't take into account NET_SKB_PAD */ + if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE) + fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD; + else + fp->rx_frag_size = 0; + } +} + +static int bnx2x_init_rss(struct bnx2x *bp) +{ + int i; + u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp); + + /* Prepare the initial contents for the indirection table if RSS is + * enabled + */ + for (i = 0; i < sizeof(bp->rss_conf_obj.ind_table); i++) + bp->rss_conf_obj.ind_table[i] = + bp->fp->cl_id + + ethtool_rxfh_indir_default(i, num_eth_queues); + + /* + * For 57710 and 57711 SEARCHER configuration (rss_keys) is + * per-port, so if explicit configuration is needed , do it only + * for a PMF. + * + * For 57712 and newer on the other hand it's a per-function + * configuration. + */ + return bnx2x_config_rss_eth(bp, bp->port.pmf || !CHIP_IS_E1x(bp)); +} + +int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj, + bool config_hash, bool enable) +{ + struct bnx2x_config_rss_params params = {NULL}; + + /* Although RSS is meaningless when there is a single HW queue we + * still need it enabled in order to have HW Rx hash generated. + * + * if (!is_eth_multi(bp)) + * bp->multi_mode = ETH_RSS_MODE_DISABLED; + */ + + params.rss_obj = rss_obj; + + __set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags); + + if (enable) { + __set_bit(BNX2X_RSS_MODE_REGULAR, ¶ms.rss_flags); + + /* RSS configuration */ + __set_bit(BNX2X_RSS_IPV4, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV4_TCP, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV6, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV6_TCP, ¶ms.rss_flags); + if (rss_obj->udp_rss_v4) + __set_bit(BNX2X_RSS_IPV4_UDP, ¶ms.rss_flags); + if (rss_obj->udp_rss_v6) + __set_bit(BNX2X_RSS_IPV6_UDP, ¶ms.rss_flags); + + if (!CHIP_IS_E1x(bp)) { + /* valid only for TUNN_MODE_VXLAN tunnel mode */ + __set_bit(BNX2X_RSS_IPV4_VXLAN, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV6_VXLAN, ¶ms.rss_flags); + + /* valid only for TUNN_MODE_GRE tunnel mode */ + __set_bit(BNX2X_RSS_TUNN_INNER_HDRS, ¶ms.rss_flags); + } + } else { + __set_bit(BNX2X_RSS_MODE_DISABLED, ¶ms.rss_flags); + } + + /* Hash bits */ + params.rss_result_mask = MULTI_MASK; + + memcpy(params.ind_table, rss_obj->ind_table, sizeof(params.ind_table)); + + if (config_hash) { + /* RSS keys */ + netdev_rss_key_fill(params.rss_key, T_ETH_RSS_KEY * 4); + __set_bit(BNX2X_RSS_SET_SRCH, ¶ms.rss_flags); + } + + if (IS_PF(bp)) + return bnx2x_config_rss(bp, ¶ms); + else + return bnx2x_vfpf_config_rss(bp, ¶ms); +} + +static int bnx2x_init_hw(struct bnx2x *bp, u32 load_code) +{ + struct bnx2x_func_state_params func_params = {NULL}; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_HW_INIT; + + func_params.params.hw_init.load_phase = load_code; + + return bnx2x_func_state_change(bp, &func_params); +} + +/* + * Cleans the object that have internal lists without sending + * ramrods. Should be run when interrupts are disabled. + */ +void bnx2x_squeeze_objects(struct bnx2x *bp) +{ + int rc; + unsigned long ramrod_flags = 0, vlan_mac_flags = 0; + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj; + + /***************** Cleanup MACs' object first *************************/ + + /* Wait for completion of requested */ + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + /* Perform a dry cleanup */ + __set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags); + + /* Clean ETH primary MAC */ + __set_bit(BNX2X_ETH_MAC, &vlan_mac_flags); + rc = mac_obj->delete_all(bp, &bp->sp_objs->mac_obj, &vlan_mac_flags, + &ramrod_flags); + if (rc != 0) + BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc); + + /* Cleanup UC list */ + vlan_mac_flags = 0; + __set_bit(BNX2X_UC_LIST_MAC, &vlan_mac_flags); + rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, + &ramrod_flags); + if (rc != 0) + BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc); + + /***************** Now clean mcast object *****************************/ + rparam.mcast_obj = &bp->mcast_obj; + __set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags); + + /* Add a DEL command... - Since we're doing a driver cleanup only, + * we take a lock surrounding both the initial send and the CONTs, + * as we don't want a true completion to disrupt us in the middle. + */ + netif_addr_lock_bh(bp->dev); + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) + BNX2X_ERR("Failed to add a new DEL command to a multi-cast object: %d\n", + rc); + + /* ...and wait until all pending commands are cleared */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + while (rc != 0) { + if (rc < 0) { + BNX2X_ERR("Failed to clean multi-cast object: %d\n", + rc); + netif_addr_unlock_bh(bp->dev); + return; + } + + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + } + netif_addr_unlock_bh(bp->dev); +} + +#ifndef BNX2X_STOP_ON_ERROR +#define LOAD_ERROR_EXIT(bp, label) \ + do { \ + (bp)->state = BNX2X_STATE_ERROR; \ + goto label; \ + } while (0) + +#define LOAD_ERROR_EXIT_CNIC(bp, label) \ + do { \ + bp->cnic_loaded = false; \ + goto label; \ + } while (0) +#else /*BNX2X_STOP_ON_ERROR*/ +#define LOAD_ERROR_EXIT(bp, label) \ + do { \ + (bp)->state = BNX2X_STATE_ERROR; \ + (bp)->panic = 1; \ + return -EBUSY; \ + } while (0) +#define LOAD_ERROR_EXIT_CNIC(bp, label) \ + do { \ + bp->cnic_loaded = false; \ + (bp)->panic = 1; \ + return -EBUSY; \ + } while (0) +#endif /*BNX2X_STOP_ON_ERROR*/ + +static void bnx2x_free_fw_stats_mem(struct bnx2x *bp) +{ + BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + return; +} + +static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) +{ + int num_groups, vf_headroom = 0; + int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1; + + /* number of queues for statistics is number of eth queues + FCoE */ + u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe_stats; + + /* Total number of FW statistics requests = + * 1 for port stats + 1 for PF stats + potential 2 for FCoE (fcoe proper + * and fcoe l2 queue) stats + num of queues (which includes another 1 + * for fcoe l2 queue if applicable) + */ + bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats; + + /* vf stats appear in the request list, but their data is allocated by + * the VFs themselves. We don't include them in the bp->fw_stats_num as + * it is used to determine where to place the vf stats queries in the + * request struct + */ + if (IS_SRIOV(bp)) + vf_headroom = bnx2x_vf_headroom(bp); + + /* Request is built from stats_query_header and an array of + * stats_query_cmd_group each of which contains + * STATS_QUERY_CMD_COUNT rules. The real number or requests is + * configured in the stats_query_header. + */ + num_groups = + (((bp->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT) + + (((bp->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT) ? + 1 : 0)); + + DP(BNX2X_MSG_SP, "stats fw_stats_num %d, vf headroom %d, num_groups %d\n", + bp->fw_stats_num, vf_headroom, num_groups); + bp->fw_stats_req_sz = sizeof(struct stats_query_header) + + num_groups * sizeof(struct stats_query_cmd_group); + + /* Data for statistics requests + stats_counter + * stats_counter holds per-STORM counters that are incremented + * when STORM has finished with the current request. + * memory for FCoE offloaded statistics are counted anyway, + * even if they will not be sent. + * VF stats are not accounted for here as the data of VF stats is stored + * in memory allocated by the VF, not here. + */ + bp->fw_stats_data_sz = sizeof(struct per_port_stats) + + sizeof(struct per_pf_stats) + + sizeof(struct fcoe_statistics_params) + + sizeof(struct per_queue_stats) * num_queue_stats + + sizeof(struct stats_counter); + + bp->fw_stats = BNX2X_PCI_ALLOC(&bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + if (!bp->fw_stats) + goto alloc_mem_err; + + /* Set shortcuts */ + bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats; + bp->fw_stats_req_mapping = bp->fw_stats_mapping; + bp->fw_stats_data = (struct bnx2x_fw_stats_data *) + ((u8 *)bp->fw_stats + bp->fw_stats_req_sz); + bp->fw_stats_data_mapping = bp->fw_stats_mapping + + bp->fw_stats_req_sz; + + DP(BNX2X_MSG_SP, "statistics request base address set to %x %x\n", + U64_HI(bp->fw_stats_req_mapping), + U64_LO(bp->fw_stats_req_mapping)); + DP(BNX2X_MSG_SP, "statistics data base address set to %x %x\n", + U64_HI(bp->fw_stats_data_mapping), + U64_LO(bp->fw_stats_data_mapping)); + return 0; + +alloc_mem_err: + bnx2x_free_fw_stats_mem(bp); + BNX2X_ERR("Can't allocate FW stats memory\n"); + return -ENOMEM; +} + +/* send load request to mcp and analyze response */ +static int bnx2x_nic_load_request(struct bnx2x *bp, u32 *load_code) +{ + u32 param; + + /* init fw_seq */ + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + + /* Get current FW pulse sequence */ + bp->fw_drv_pulse_wr_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) & + DRV_PULSE_SEQ_MASK); + BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq); + + param = DRV_MSG_CODE_LOAD_REQ_WITH_LFA; + + if (IS_MF_SD(bp) && bnx2x_port_after_undi(bp)) + param |= DRV_MSG_CODE_LOAD_REQ_FORCE_LFA; + + /* load request */ + (*load_code) = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, param); + + /* if mcp fails to respond we must abort */ + if (!(*load_code)) { + BNX2X_ERR("MCP response failure, aborting\n"); + return -EBUSY; + } + + /* If mcp refused (e.g. other port is in diagnostic mode) we + * must abort + */ + if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) { + BNX2X_ERR("MCP refused load request, aborting\n"); + return -EBUSY; + } + return 0; +} + +/* check whether another PF has already loaded FW to chip. In + * virtualized environments a pf from another VM may have already + * initialized the device including loading FW + */ +int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err) +{ + /* is another pf loaded on this engine? */ + if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP && + load_code != FW_MSG_CODE_DRV_LOAD_COMMON) { + /* build my FW version dword */ + u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) + + (BCM_5710_FW_MINOR_VERSION << 8) + + (BCM_5710_FW_REVISION_VERSION << 16) + + (BCM_5710_FW_ENGINEERING_VERSION << 24); + + /* read loaded FW from chip */ + u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); + + DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n", + loaded_fw, my_fw); + + /* abort nic load if version mismatch */ + if (my_fw != loaded_fw) { + if (print_err) + BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n", + loaded_fw, my_fw); + else + BNX2X_DEV_INFO("bnx2x with FW %x was already loaded which mismatches my %x FW, possibly due to MF UNDI\n", + loaded_fw, my_fw); + return -EBUSY; + } + } + return 0; +} + +/* returns the "mcp load_code" according to global load_count array */ +static int bnx2x_nic_load_no_mcp(struct bnx2x *bp, int port) +{ + int path = BP_PATH(bp); + + DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n", + path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], + bnx2x_load_count[path][2]); + bnx2x_load_count[path][0]++; + bnx2x_load_count[path][1 + port]++; + DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n", + path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], + bnx2x_load_count[path][2]); + if (bnx2x_load_count[path][0] == 1) + return FW_MSG_CODE_DRV_LOAD_COMMON; + else if (bnx2x_load_count[path][1 + port] == 1) + return FW_MSG_CODE_DRV_LOAD_PORT; + else + return FW_MSG_CODE_DRV_LOAD_FUNCTION; +} + +/* mark PMF if applicable */ +static void bnx2x_nic_load_pmf(struct bnx2x *bp, u32 load_code) +{ + if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) || + (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) { + bp->port.pmf = 1; + /* We need the barrier to ensure the ordering between the + * writing to bp->port.pmf here and reading it from the + * bnx2x_periodic_task(). + */ + smp_mb(); + } else { + bp->port.pmf = 0; + } + + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); +} + +static void bnx2x_nic_load_afex_dcc(struct bnx2x *bp, int load_code) +{ + if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) && + (bp->common.shmem2_base)) { + if (SHMEM2_HAS(bp, dcc_support)) + SHMEM2_WR(bp, dcc_support, + (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV | + SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV)); + if (SHMEM2_HAS(bp, afex_driver_support)) + SHMEM2_WR(bp, afex_driver_support, + SHMEM_AFEX_SUPPORTED_VERSION_ONE); + } + + /* Set AFEX default VLAN tag to an invalid value */ + bp->afex_def_vlan_tag = -1; +} + +/** + * bnx2x_bz_fp - zero content of the fastpath structure. + * + * @bp: driver handle + * @index: fastpath index to be zeroed + * + * Makes sure the contents of the bp->fp[index].napi is kept + * intact. + */ +static void bnx2x_bz_fp(struct bnx2x *bp, int index) +{ + struct bnx2x_fastpath *fp = &bp->fp[index]; + int cos; + struct napi_struct orig_napi = fp->napi; + struct bnx2x_agg_info *orig_tpa_info = fp->tpa_info; + + /* bzero bnx2x_fastpath contents */ + if (fp->tpa_info) + memset(fp->tpa_info, 0, ETH_MAX_AGGREGATION_QUEUES_E1H_E2 * + sizeof(struct bnx2x_agg_info)); + memset(fp, 0, sizeof(*fp)); + + /* Restore the NAPI object as it has been already initialized */ + fp->napi = orig_napi; + fp->tpa_info = orig_tpa_info; + fp->bp = bp; + fp->index = index; + if (IS_ETH_FP(fp)) + fp->max_cos = bp->max_cos; + else + /* Special queues support only one CoS */ + fp->max_cos = 1; + + /* Init txdata pointers */ + if (IS_FCOE_FP(fp)) + fp->txdata_ptr[0] = &bp->bnx2x_txq[FCOE_TXQ_IDX(bp)]; + if (IS_ETH_FP(fp)) + for_each_cos_in_tx_queue(fp, cos) + fp->txdata_ptr[cos] = &bp->bnx2x_txq[cos * + BNX2X_NUM_ETH_QUEUES(bp) + index]; + + /* set the tpa flag for each queue. The tpa flag determines the queue + * minimal size so it must be set prior to queue memory allocation + */ + if (bp->dev->features & NETIF_F_LRO) + fp->mode = TPA_MODE_LRO; + else if (bp->dev->features & NETIF_F_GRO_HW) + fp->mode = TPA_MODE_GRO; + else + fp->mode = TPA_MODE_DISABLED; + + /* We don't want TPA if it's disabled in bp + * or if this is an FCoE L2 ring. + */ + if (bp->disable_tpa || IS_FCOE_FP(fp)) + fp->mode = TPA_MODE_DISABLED; +} + +void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state) +{ + u32 cur; + + if (!IS_MF_BD(bp) || !SHMEM2_HAS(bp, os_driver_state) || IS_VF(bp)) + return; + + cur = SHMEM2_RD(bp, os_driver_state[BP_FW_MB_IDX(bp)]); + DP(NETIF_MSG_IFUP, "Driver state %08x-->%08x\n", + cur, state); + + SHMEM2_WR(bp, os_driver_state[BP_FW_MB_IDX(bp)], state); +} + +int bnx2x_load_cnic(struct bnx2x *bp) +{ + int i, rc, port = BP_PORT(bp); + + DP(NETIF_MSG_IFUP, "Starting CNIC-related load\n"); + + mutex_init(&bp->cnic_mutex); + + if (IS_PF(bp)) { + rc = bnx2x_alloc_mem_cnic(bp); + if (rc) { + BNX2X_ERR("Unable to allocate bp memory for cnic\n"); + LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0); + } + } + + rc = bnx2x_alloc_fp_mem_cnic(bp); + if (rc) { + BNX2X_ERR("Unable to allocate memory for cnic fps\n"); + LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0); + } + + /* Update the number of queues with the cnic queues */ + rc = bnx2x_set_real_num_queues(bp, 1); + if (rc) { + BNX2X_ERR("Unable to set real_num_queues including cnic\n"); + LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0); + } + + /* Add all CNIC NAPI objects */ + bnx2x_add_all_napi_cnic(bp); + DP(NETIF_MSG_IFUP, "cnic napi added\n"); + bnx2x_napi_enable_cnic(bp); + + rc = bnx2x_init_hw_func_cnic(bp); + if (rc) + LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic1); + + bnx2x_nic_init_cnic(bp); + + if (IS_PF(bp)) { + /* Enable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1); + + /* setup cnic queues */ + for_each_cnic_queue(bp, i) { + rc = bnx2x_setup_queue(bp, &bp->fp[i], 0); + if (rc) { + BNX2X_ERR("Queue setup failed\n"); + LOAD_ERROR_EXIT(bp, load_error_cnic2); + } + } + } + + /* Initialize Rx filter. */ + bnx2x_set_rx_mode_inner(bp); + + /* re-read iscsi info */ + bnx2x_get_iscsi_info(bp); + bnx2x_setup_cnic_irq_info(bp); + bnx2x_setup_cnic_info(bp); + bp->cnic_loaded = true; + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD); + + DP(NETIF_MSG_IFUP, "Ending successfully CNIC-related load\n"); + + return 0; + +#ifndef BNX2X_STOP_ON_ERROR +load_error_cnic2: + /* Disable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); + +load_error_cnic1: + bnx2x_napi_disable_cnic(bp); + /* Update the number of queues without the cnic queues */ + if (bnx2x_set_real_num_queues(bp, 0)) + BNX2X_ERR("Unable to set real_num_queues not including cnic\n"); +load_error_cnic0: + BNX2X_ERR("CNIC-related load failed\n"); + bnx2x_free_fp_mem_cnic(bp); + bnx2x_free_mem_cnic(bp); + return rc; +#endif /* ! BNX2X_STOP_ON_ERROR */ +} + +/* must be called with rtnl_lock */ +int bnx2x_nic_load(struct bnx2x *bp, int load_mode) +{ + int port = BP_PORT(bp); + int i, rc = 0, load_code = 0; + + DP(NETIF_MSG_IFUP, "Starting NIC load\n"); + DP(NETIF_MSG_IFUP, + "CNIC is %s\n", CNIC_ENABLED(bp) ? "enabled" : "disabled"); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + BNX2X_ERR("Can't load NIC when there is panic\n"); + return -EPERM; + } +#endif + + bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; + + /* zero the structure w/o any lock, before SP handler is initialized */ + memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link)); + __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &bp->last_reported_link.link_report_flags); + + if (IS_PF(bp)) + /* must be called before memory allocation and HW init */ + bnx2x_ilt_set_info(bp); + + /* + * Zero fastpath structures preserving invariants like napi, which are + * allocated only once, fp index, max_cos, bp pointer. + * Also set fp->mode and txdata_ptr. + */ + DP(NETIF_MSG_IFUP, "num queues: %d", bp->num_queues); + for_each_queue(bp, i) + bnx2x_bz_fp(bp, i); + memset(bp->bnx2x_txq, 0, (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS + + bp->num_cnic_queues) * + sizeof(struct bnx2x_fp_txdata)); + + bp->fcoe_init = false; + + /* Set the receive queues buffer size */ + bnx2x_set_rx_buf_size(bp); + + if (IS_PF(bp)) { + rc = bnx2x_alloc_mem(bp); + if (rc) { + BNX2X_ERR("Unable to allocate bp memory\n"); + return rc; + } + } + + /* need to be done after alloc mem, since it's self adjusting to amount + * of memory available for RSS queues + */ + rc = bnx2x_alloc_fp_mem(bp); + if (rc) { + BNX2X_ERR("Unable to allocate memory for fps\n"); + LOAD_ERROR_EXIT(bp, load_error0); + } + + /* Allocated memory for FW statistics */ + rc = bnx2x_alloc_fw_stats_mem(bp); + if (rc) + LOAD_ERROR_EXIT(bp, load_error0); + + /* request pf to initialize status blocks */ + if (IS_VF(bp)) { + rc = bnx2x_vfpf_init(bp); + if (rc) + LOAD_ERROR_EXIT(bp, load_error0); + } + + /* As long as bnx2x_alloc_mem() may possibly update + * bp->num_queues, bnx2x_set_real_num_queues() should always + * come after it. At this stage cnic queues are not counted. + */ + rc = bnx2x_set_real_num_queues(bp, 0); + if (rc) { + BNX2X_ERR("Unable to set real_num_queues\n"); + LOAD_ERROR_EXIT(bp, load_error0); + } + + /* configure multi cos mappings in kernel. + * this configuration may be overridden by a multi class queue + * discipline or by a dcbx negotiation result. + */ + bnx2x_setup_tc(bp->dev, bp->max_cos); + + /* Add all NAPI objects */ + bnx2x_add_all_napi(bp); + DP(NETIF_MSG_IFUP, "napi added\n"); + bnx2x_napi_enable(bp); + + if (IS_PF(bp)) { + /* set pf load just before approaching the MCP */ + bnx2x_set_pf_load(bp); + + /* if mcp exists send load request and analyze response */ + if (!BP_NOMCP(bp)) { + /* attempt to load pf */ + rc = bnx2x_nic_load_request(bp, &load_code); + if (rc) + LOAD_ERROR_EXIT(bp, load_error1); + + /* what did mcp say? */ + rc = bnx2x_compare_fw_ver(bp, load_code, true); + if (rc) { + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error2); + } + } else { + load_code = bnx2x_nic_load_no_mcp(bp, port); + } + + /* mark pmf if applicable */ + bnx2x_nic_load_pmf(bp, load_code); + + /* Init Function state controlling object */ + bnx2x__init_func_obj(bp); + + /* Initialize HW */ + rc = bnx2x_init_hw(bp, load_code); + if (rc) { + BNX2X_ERR("HW init failed, aborting\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error2); + } + } + + bnx2x_pre_irq_nic_init(bp); + + /* Connect to IRQs */ + rc = bnx2x_setup_irqs(bp); + if (rc) { + BNX2X_ERR("setup irqs failed\n"); + if (IS_PF(bp)) + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error2); + } + + /* Init per-function objects */ + if (IS_PF(bp)) { + /* Setup NIC internals and enable interrupts */ + bnx2x_post_irq_nic_init(bp, load_code); + + bnx2x_init_bp_objs(bp); + bnx2x_iov_nic_init(bp); + + /* Set AFEX default VLAN tag to an invalid value */ + bp->afex_def_vlan_tag = -1; + bnx2x_nic_load_afex_dcc(bp, load_code); + bp->state = BNX2X_STATE_OPENING_WAIT4_PORT; + rc = bnx2x_func_start(bp); + if (rc) { + BNX2X_ERR("Function start failed!\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + + LOAD_ERROR_EXIT(bp, load_error3); + } + + /* Send LOAD_DONE command to MCP */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, + DRV_MSG_CODE_LOAD_DONE, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + LOAD_ERROR_EXIT(bp, load_error3); + } + } + + /* initialize FW coalescing state machines in RAM */ + bnx2x_update_coalesce(bp); + } + + /* setup the leading queue */ + rc = bnx2x_setup_leading(bp); + if (rc) { + BNX2X_ERR("Setup leading failed!\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } + + /* set up the rest of the queues */ + for_each_nondefault_eth_queue(bp, i) { + if (IS_PF(bp)) + rc = bnx2x_setup_queue(bp, &bp->fp[i], false); + else /* VF */ + rc = bnx2x_vfpf_setup_q(bp, &bp->fp[i], false); + if (rc) { + BNX2X_ERR("Queue %d setup failed\n", i); + LOAD_ERROR_EXIT(bp, load_error3); + } + } + + /* setup rss */ + rc = bnx2x_init_rss(bp); + if (rc) { + BNX2X_ERR("PF RSS init failed\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } + + /* Now when Clients are configured we are ready to work */ + bp->state = BNX2X_STATE_OPEN; + + /* Configure a ucast MAC */ + if (IS_PF(bp)) + rc = bnx2x_set_eth_mac(bp, true); + else /* vf */ + rc = bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, bp->fp->index, + true); + if (rc) { + BNX2X_ERR("Setting Ethernet MAC failed\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } + + if (IS_PF(bp) && bp->pending_max) { + bnx2x_update_max_mf_config(bp, bp->pending_max); + bp->pending_max = 0; + } + + bp->force_link_down = false; + if (bp->port.pmf) { + rc = bnx2x_initial_phy_init(bp, load_mode); + if (rc) + LOAD_ERROR_EXIT(bp, load_error3); + } + bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_BOOT_FROM_SAN; + + /* Start fast path */ + + /* Re-configure vlan filters */ + rc = bnx2x_vlan_reconfigure_vid(bp); + if (rc) + LOAD_ERROR_EXIT(bp, load_error3); + + /* Initialize Rx filter. */ + bnx2x_set_rx_mode_inner(bp); + + if (bp->flags & PTP_SUPPORTED) { + bnx2x_init_ptp(bp); + bnx2x_configure_ptp_filters(bp); + } + /* Start Tx */ + switch (load_mode) { + case LOAD_NORMAL: + /* Tx queue should be only re-enabled */ + netif_tx_wake_all_queues(bp->dev); + break; + + case LOAD_OPEN: + netif_tx_start_all_queues(bp->dev); + smp_mb__after_atomic(); + break; + + case LOAD_DIAG: + case LOAD_LOOPBACK_EXT: + bp->state = BNX2X_STATE_DIAG; + break; + + default: + break; + } + + if (bp->port.pmf) + bnx2x_update_drv_flags(bp, 1 << DRV_FLAGS_PORT_MASK, 0); + else + bnx2x__link_status_update(bp); + + /* start the timer */ + mod_timer(&bp->timer, jiffies + bp->current_interval); + + if (CNIC_ENABLED(bp)) + bnx2x_load_cnic(bp); + + if (IS_PF(bp)) + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + + if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { + /* mark driver is loaded in shmem2 */ + u32 val; + val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]); + val &= ~DRV_FLAGS_MTU_MASK; + val |= (bp->dev->mtu << DRV_FLAGS_MTU_SHIFT); + SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], + val | DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED | + DRV_FLAGS_CAPABILITIES_LOADED_L2); + } + + /* Wait for all pending SP commands to complete */ + if (IS_PF(bp) && !bnx2x_wait_sp_comp(bp, ~0x0UL)) { + BNX2X_ERR("Timeout waiting for SP elements to complete\n"); + bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); + return -EBUSY; + } + + /* Update driver data for On-Chip MFW dump. */ + if (IS_PF(bp)) + bnx2x_update_mfw_dump(bp); + + /* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */ + if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG)) + bnx2x_dcbx_init(bp, false); + + if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) + bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_ACTIVE); + + DP(NETIF_MSG_IFUP, "Ending successfully NIC load\n"); + + return 0; + +#ifndef BNX2X_STOP_ON_ERROR +load_error3: + if (IS_PF(bp)) { + bnx2x_int_disable_sync(bp, 1); + + /* Clean queueable objects */ + bnx2x_squeeze_objects(bp); + } + + /* Free SKBs, SGEs, TPA pool and driver internals */ + bnx2x_free_skbs(bp); + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + + /* Release IRQs */ + bnx2x_free_irq(bp); +load_error2: + if (IS_PF(bp) && !BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + } + + bp->port.pmf = 0; +load_error1: + bnx2x_napi_disable(bp); + bnx2x_del_all_napi(bp); + + /* clear pf_load status, as it was already set */ + if (IS_PF(bp)) + bnx2x_clear_pf_load(bp); +load_error0: + bnx2x_free_fw_stats_mem(bp); + bnx2x_free_fp_mem(bp); + bnx2x_free_mem(bp); + + return rc; +#endif /* ! BNX2X_STOP_ON_ERROR */ +} + +int bnx2x_drain_tx_queues(struct bnx2x *bp) +{ + u8 rc = 0, cos, i; + + /* Wait until tx fastpath tasks complete */ + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + for_each_cos_in_tx_queue(fp, cos) + rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]); + if (rc) + return rc; + } + return 0; +} + +/* must be called with rtnl_lock */ +int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link) +{ + int i; + bool global = false; + + DP(NETIF_MSG_IFUP, "Starting NIC unload\n"); + + if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) + bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED); + + /* mark driver is unloaded in shmem2 */ + if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { + u32 val; + val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]); + SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], + val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); + } + + if (IS_PF(bp) && bp->recovery_state != BNX2X_RECOVERY_DONE && + (bp->state == BNX2X_STATE_CLOSED || + bp->state == BNX2X_STATE_ERROR)) { + /* We can get here if the driver has been unloaded + * during parity error recovery and is either waiting for a + * leader to complete or for other functions to unload and + * then ifdown has been issued. In this case we want to + * unload and let other functions to complete a recovery + * process. + */ + bp->recovery_state = BNX2X_RECOVERY_DONE; + bp->is_leader = 0; + bnx2x_release_leader_lock(bp); + smp_mb(); + + DP(NETIF_MSG_IFDOWN, "Releasing a leadership...\n"); + BNX2X_ERR("Can't unload in closed or error state\n"); + return -EINVAL; + } + + /* Nothing to do during unload if previous bnx2x_nic_load() + * have not completed successfully - all resources are released. + * + * we can get here only after unsuccessful ndo_* callback, during which + * dev->IFF_UP flag is still on. + */ + if (bp->state == BNX2X_STATE_CLOSED || bp->state == BNX2X_STATE_ERROR) + return 0; + + /* It's important to set the bp->state to the value different from + * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int() + * may restart the Tx from the NAPI context (see bnx2x_tx_int()). + */ + bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; + smp_mb(); + + /* indicate to VFs that the PF is going down */ + bnx2x_iov_channel_down(bp); + + if (CNIC_LOADED(bp)) + bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); + + /* Stop Tx */ + bnx2x_tx_disable(bp); + netdev_reset_tc(bp->dev); + + bp->rx_mode = BNX2X_RX_MODE_NONE; + + del_timer_sync(&bp->timer); + + if (IS_PF(bp) && !BP_NOMCP(bp)) { + /* Set ALWAYS_ALIVE bit in shmem */ + bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; + bnx2x_drv_pulse(bp); + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_save_statistics(bp); + } + + /* wait till consumers catch up with producers in all queues. + * If we're recovering, FW can't write to host so no reason + * to wait for the queues to complete all Tx. + */ + if (unload_mode != UNLOAD_RECOVERY) + bnx2x_drain_tx_queues(bp); + + /* if VF indicate to PF this function is going down (PF will delete sp + * elements and clear initializations + */ + if (IS_VF(bp)) { + bnx2x_clear_vlan_info(bp); + bnx2x_vfpf_close_vf(bp); + } else if (unload_mode != UNLOAD_RECOVERY) { + /* if this is a normal/close unload need to clean up chip*/ + bnx2x_chip_cleanup(bp, unload_mode, keep_link); + } else { + /* Send the UNLOAD_REQUEST to the MCP */ + bnx2x_send_unload_req(bp, unload_mode); + + /* Prevent transactions to host from the functions on the + * engine that doesn't reset global blocks in case of global + * attention once global blocks are reset and gates are opened + * (the engine which leader will perform the recovery + * last). + */ + if (!CHIP_IS_E1x(bp)) + bnx2x_pf_disable(bp); + + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + if (CNIC_LOADED(bp)) + bnx2x_del_all_napi_cnic(bp); + /* Release IRQs */ + bnx2x_free_irq(bp); + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp, false); + } + + /* + * At this stage no more interrupts will arrive so we may safely clean + * the queueable objects here in case they failed to get cleaned so far. + */ + if (IS_PF(bp)) + bnx2x_squeeze_objects(bp); + + /* There should be no more pending SP commands at this stage */ + bp->sp_state = 0; + + bp->port.pmf = 0; + + /* clear pending work in rtnl task */ + bp->sp_rtnl_state = 0; + smp_mb(); + + /* Free SKBs, SGEs, TPA pool and driver internals */ + bnx2x_free_skbs(bp); + if (CNIC_LOADED(bp)) + bnx2x_free_skbs_cnic(bp); + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + + bnx2x_free_fp_mem(bp); + if (CNIC_LOADED(bp)) + bnx2x_free_fp_mem_cnic(bp); + + if (IS_PF(bp)) { + if (CNIC_LOADED(bp)) + bnx2x_free_mem_cnic(bp); + } + bnx2x_free_mem(bp); + + bp->state = BNX2X_STATE_CLOSED; + bp->cnic_loaded = false; + + /* Clear driver version indication in shmem */ + if (IS_PF(bp) && !BP_NOMCP(bp)) + bnx2x_update_mng_version(bp); + + /* Check if there are pending parity attentions. If there are - set + * RECOVERY_IN_PROGRESS. + */ + if (IS_PF(bp) && bnx2x_chk_parity_attn(bp, &global, false)) { + bnx2x_set_reset_in_progress(bp); + + /* Set RESET_IS_GLOBAL if needed */ + if (global) + bnx2x_set_reset_global(bp); + } + + /* The last driver must disable a "close the gate" if there is no + * parity attention or "process kill" pending. + */ + if (IS_PF(bp) && + !bnx2x_clear_pf_load(bp) && + bnx2x_reset_is_done(bp, BP_PATH(bp))) + bnx2x_disable_close_the_gate(bp); + + DP(NETIF_MSG_IFUP, "Ending NIC unload\n"); + + return 0; +} + +int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) +{ + u16 pmcsr; + + /* If there is no power capability, silently succeed */ + if (!bp->pdev->pm_cap) { + BNX2X_DEV_INFO("No power capability. Breaking.\n"); + return 0; + } + + pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_CTRL, &pmcsr); + + switch (state) { + case PCI_D0: + pci_write_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_CTRL, + ((pmcsr & ~PCI_PM_CTRL_STATE_MASK) | + PCI_PM_CTRL_PME_STATUS)); + + if (pmcsr & PCI_PM_CTRL_STATE_MASK) + /* delay required during transition out of D3hot */ + msleep(20); + break; + + case PCI_D3hot: + /* If there are other clients above don't + shut down the power */ + if (atomic_read(&bp->pdev->enable_cnt) != 1) + return 0; + /* Don't shut down the power for emulation and FPGA */ + if (CHIP_REV_IS_SLOW(bp)) + return 0; + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= 3; + + if (bp->wol) + pmcsr |= PCI_PM_CTRL_PME_ENABLE; + + pci_write_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_CTRL, + pmcsr); + + /* No more memory access after this point until + * device is brought back to D0. + */ + break; + + default: + dev_err(&bp->pdev->dev, "Can't support state = %d\n", state); + return -EINVAL; + } + return 0; +} + +/* + * net_device service functions + */ +static int bnx2x_poll(struct napi_struct *napi, int budget) +{ + struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath, + napi); + struct bnx2x *bp = fp->bp; + int rx_work_done; + u8 cos; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + napi_complete(napi); + return 0; + } +#endif + for_each_cos_in_tx_queue(fp, cos) + if (bnx2x_tx_queue_has_work(fp->txdata_ptr[cos])) + bnx2x_tx_int(bp, fp->txdata_ptr[cos]); + + rx_work_done = (bnx2x_has_rx_work(fp)) ? bnx2x_rx_int(fp, budget) : 0; + + if (rx_work_done < budget) { + /* No need to update SB for FCoE L2 ring as long as + * it's connected to the default SB and the SB + * has been updated when NAPI was scheduled. + */ + if (IS_FCOE_FP(fp)) { + napi_complete_done(napi, rx_work_done); + } else { + bnx2x_update_fpsb_idx(fp); + /* bnx2x_has_rx_work() reads the status block, + * thus we need to ensure that status block indices + * have been actually read (bnx2x_update_fpsb_idx) + * prior to this check (bnx2x_has_rx_work) so that + * we won't write the "newer" value of the status block + * to IGU (if there was a DMA right after + * bnx2x_has_rx_work and if there is no rmb, the memory + * reading (bnx2x_update_fpsb_idx) may be postponed + * to right before bnx2x_ack_sb). In this case there + * will never be another interrupt until there is + * another update of the status block, while there + * is still unhandled work. + */ + rmb(); + + if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { + if (napi_complete_done(napi, rx_work_done)) { + /* Re-enable interrupts */ + DP(NETIF_MSG_RX_STATUS, + "Update index to %d\n", fp->fp_hc_idx); + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, + le16_to_cpu(fp->fp_hc_idx), + IGU_INT_ENABLE, 1); + } + } else { + rx_work_done = budget; + } + } + } + + return rx_work_done; +} + +/* we split the first BD into headers and data BDs + * to ease the pain of our fellow microcode engineers + * we use one mapping for both BDs + */ +static u16 bnx2x_tx_split(struct bnx2x *bp, + struct bnx2x_fp_txdata *txdata, + struct sw_tx_bd *tx_buf, + struct eth_tx_start_bd **tx_bd, u16 hlen, + u16 bd_prod) +{ + struct eth_tx_start_bd *h_tx_bd = *tx_bd; + struct eth_tx_bd *d_tx_bd; + dma_addr_t mapping; + int old_len = le16_to_cpu(h_tx_bd->nbytes); + + /* first fix first BD */ + h_tx_bd->nbytes = cpu_to_le16(hlen); + + DP(NETIF_MSG_TX_QUEUED, "TSO split header size is %d (%x:%x)\n", + h_tx_bd->nbytes, h_tx_bd->addr_hi, h_tx_bd->addr_lo); + + /* now get a new data BD + * (after the pbd) and fill it */ + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + d_tx_bd = &txdata->tx_desc_ring[bd_prod].reg_bd; + + mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi), + le32_to_cpu(h_tx_bd->addr_lo)) + hlen; + + d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + d_tx_bd->nbytes = cpu_to_le16(old_len - hlen); + + /* this marks the BD as one that has no individual mapping */ + tx_buf->flags |= BNX2X_TSO_SPLIT_BD; + + DP(NETIF_MSG_TX_QUEUED, + "TSO split data size is %d (%x:%x)\n", + d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo); + + /* update tx_bd */ + *tx_bd = (struct eth_tx_start_bd *)d_tx_bd; + + return bd_prod; +} + +#define bswab32(b32) ((__force __le32) swab32((__force __u32) (b32))) +#define bswab16(b16) ((__force __le16) swab16((__force __u16) (b16))) +static __le16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix) +{ + __sum16 tsum = (__force __sum16) csum; + + if (fix > 0) + tsum = ~csum_fold(csum_sub((__force __wsum) csum, + csum_partial(t_header - fix, fix, 0))); + + else if (fix < 0) + tsum = ~csum_fold(csum_add((__force __wsum) csum, + csum_partial(t_header, -fix, 0))); + + return bswab16(tsum); +} + +static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) +{ + u32 rc; + __u8 prot = 0; + __be16 protocol; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return XMIT_PLAIN; + + protocol = vlan_get_protocol(skb); + if (protocol == htons(ETH_P_IPV6)) { + rc = XMIT_CSUM_V6; + prot = ipv6_hdr(skb)->nexthdr; + } else { + rc = XMIT_CSUM_V4; + prot = ip_hdr(skb)->protocol; + } + + if (!CHIP_IS_E1x(bp) && skb->encapsulation) { + if (inner_ip_hdr(skb)->version == 6) { + rc |= XMIT_CSUM_ENC_V6; + if (inner_ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + rc |= XMIT_CSUM_TCP; + } else { + rc |= XMIT_CSUM_ENC_V4; + if (inner_ip_hdr(skb)->protocol == IPPROTO_TCP) + rc |= XMIT_CSUM_TCP; + } + } + if (prot == IPPROTO_TCP) + rc |= XMIT_CSUM_TCP; + + if (skb_is_gso(skb)) { + if (skb_is_gso_v6(skb)) { + rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP); + if (rc & XMIT_CSUM_ENC) + rc |= XMIT_GSO_ENC_V6; + } else { + rc |= (XMIT_GSO_V4 | XMIT_CSUM_TCP); + if (rc & XMIT_CSUM_ENC) + rc |= XMIT_GSO_ENC_V4; + } + } + + return rc; +} + +/* VXLAN: 4 = 1 (for linear data BD) + 3 (2 for PBD and last BD) */ +#define BNX2X_NUM_VXLAN_TSO_WIN_SUB_BDS 4 + +/* Regular: 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */ +#define BNX2X_NUM_TSO_WIN_SUB_BDS 3 + +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - BDS_PER_TX_PKT) +/* check if packet requires linearization (packet is too fragmented) + no need to check fragmentation if page size > 8K (there will be no + violation to FW restrictions) */ +static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, + u32 xmit_type) +{ + int first_bd_sz = 0, num_tso_win_sub = BNX2X_NUM_TSO_WIN_SUB_BDS; + int to_copy = 0, hlen = 0; + + if (xmit_type & XMIT_GSO_ENC) + num_tso_win_sub = BNX2X_NUM_VXLAN_TSO_WIN_SUB_BDS; + + if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - num_tso_win_sub)) { + if (xmit_type & XMIT_GSO) { + unsigned short lso_mss = skb_shinfo(skb)->gso_size; + int wnd_size = MAX_FETCH_BD - num_tso_win_sub; + /* Number of windows to check */ + int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size; + int wnd_idx = 0; + int frag_idx = 0; + u32 wnd_sum = 0; + + /* Headers length */ + if (xmit_type & XMIT_GSO_ENC) + hlen = (int)(skb_inner_transport_header(skb) - + skb->data) + + inner_tcp_hdrlen(skb); + else + hlen = (int)(skb_transport_header(skb) - + skb->data) + tcp_hdrlen(skb); + + /* Amount of data (w/o headers) on linear part of SKB*/ + first_bd_sz = skb_headlen(skb) - hlen; + + wnd_sum = first_bd_sz; + + /* Calculate the first sum - it's special */ + for (frag_idx = 0; frag_idx < wnd_size - 1; frag_idx++) + wnd_sum += + skb_frag_size(&skb_shinfo(skb)->frags[frag_idx]); + + /* If there was data on linear skb data - check it */ + if (first_bd_sz > 0) { + if (unlikely(wnd_sum < lso_mss)) { + to_copy = 1; + goto exit_lbl; + } + + wnd_sum -= first_bd_sz; + } + + /* Others are easier: run through the frag list and + check all windows */ + for (wnd_idx = 0; wnd_idx <= num_wnds; wnd_idx++) { + wnd_sum += + skb_frag_size(&skb_shinfo(skb)->frags[wnd_idx + wnd_size - 1]); + + if (unlikely(wnd_sum < lso_mss)) { + to_copy = 1; + break; + } + wnd_sum -= + skb_frag_size(&skb_shinfo(skb)->frags[wnd_idx]); + } + } else { + /* in non-LSO too fragmented packet should always + be linearized */ + to_copy = 1; + } + } + +exit_lbl: + if (unlikely(to_copy)) + DP(NETIF_MSG_TX_QUEUED, + "Linearization IS REQUIRED for %s packet. num_frags %d hlen %d first_bd_sz %d\n", + (xmit_type & XMIT_GSO) ? "LSO" : "non-LSO", + skb_shinfo(skb)->nr_frags, hlen, first_bd_sz); + + return to_copy; +} +#endif + +/** + * bnx2x_set_pbd_gso - update PBD in GSO case. + * + * @skb: packet skb + * @pbd: parse BD + * @xmit_type: xmit flags + */ +static void bnx2x_set_pbd_gso(struct sk_buff *skb, + struct eth_tx_parse_bd_e1x *pbd, + u32 xmit_type) +{ + pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size); + pbd->tcp_send_seq = bswab32(tcp_hdr(skb)->seq); + pbd->tcp_flags = pbd_tcp_flags(tcp_hdr(skb)); + + if (xmit_type & XMIT_GSO_V4) { + pbd->ip_id = bswab16(ip_hdr(skb)->id); + pbd->tcp_pseudo_csum = + bswab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); + } else { + pbd->tcp_pseudo_csum = + bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); + } + + pbd->global_data |= + cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN); +} + +/** + * bnx2x_set_pbd_csum_enc - update PBD with checksum and return header length + * + * @bp: driver handle + * @skb: packet skb + * @parsing_data: data to be updated + * @xmit_type: xmit flags + * + * 57712/578xx related, when skb has encapsulation + */ +static u8 bnx2x_set_pbd_csum_enc(struct bnx2x *bp, struct sk_buff *skb, + u32 *parsing_data, u32 xmit_type) +{ + *parsing_data |= + ((((u8 *)skb_inner_transport_header(skb) - skb->data) >> 1) << + ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W_SHIFT) & + ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W; + + if (xmit_type & XMIT_CSUM_TCP) { + *parsing_data |= ((inner_tcp_hdrlen(skb) / 4) << + ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) & + ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW; + + return skb_inner_transport_header(skb) + + inner_tcp_hdrlen(skb) - skb->data; + } + + /* We support checksum offload for TCP and UDP only. + * No need to pass the UDP header length - it's a constant. + */ + return skb_inner_transport_header(skb) + + sizeof(struct udphdr) - skb->data; +} + +/** + * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length + * + * @bp: driver handle + * @skb: packet skb + * @parsing_data: data to be updated + * @xmit_type: xmit flags + * + * 57712/578xx related + */ +static u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb, + u32 *parsing_data, u32 xmit_type) +{ + *parsing_data |= + ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) << + ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W_SHIFT) & + ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W; + + if (xmit_type & XMIT_CSUM_TCP) { + *parsing_data |= ((tcp_hdrlen(skb) / 4) << + ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) & + ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW; + + return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data; + } + /* We support checksum offload for TCP and UDP only. + * No need to pass the UDP header length - it's a constant. + */ + return skb_transport_header(skb) + sizeof(struct udphdr) - skb->data; +} + +/* set FW indication according to inner or outer protocols if tunneled */ +static void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb, + struct eth_tx_start_bd *tx_start_bd, + u32 xmit_type) +{ + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM; + + if (xmit_type & (XMIT_CSUM_ENC_V6 | XMIT_CSUM_V6)) + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IPV6; + + if (!(xmit_type & XMIT_CSUM_TCP)) + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IS_UDP; +} + +/** + * bnx2x_set_pbd_csum - update PBD with checksum and return header length + * + * @bp: driver handle + * @skb: packet skb + * @pbd: parse BD to be updated + * @xmit_type: xmit flags + */ +static u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb, + struct eth_tx_parse_bd_e1x *pbd, + u32 xmit_type) +{ + u8 hlen = (skb_network_header(skb) - skb->data) >> 1; + + /* for now NS flag is not used in Linux */ + pbd->global_data = + cpu_to_le16(hlen | + ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) << + ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT)); + + pbd->ip_hlen_w = (skb_transport_header(skb) - + skb_network_header(skb)) >> 1; + + hlen += pbd->ip_hlen_w; + + /* We support checksum offload for TCP and UDP only */ + if (xmit_type & XMIT_CSUM_TCP) + hlen += tcp_hdrlen(skb) / 2; + else + hlen += sizeof(struct udphdr) / 2; + + pbd->total_hlen_w = cpu_to_le16(hlen); + hlen = hlen*2; + + if (xmit_type & XMIT_CSUM_TCP) { + pbd->tcp_pseudo_csum = bswab16(tcp_hdr(skb)->check); + + } else { + s8 fix = SKB_CS_OFF(skb); /* signed! */ + + DP(NETIF_MSG_TX_QUEUED, + "hlen %d fix %d csum before fix %x\n", + le16_to_cpu(pbd->total_hlen_w), fix, SKB_CS(skb)); + + /* HW bug: fixup the CSUM */ + pbd->tcp_pseudo_csum = + bnx2x_csum_fix(skb_transport_header(skb), + SKB_CS(skb), fix); + + DP(NETIF_MSG_TX_QUEUED, "csum after fix %x\n", + pbd->tcp_pseudo_csum); + } + + return hlen; +} + +static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb, + struct eth_tx_parse_bd_e2 *pbd_e2, + struct eth_tx_parse_2nd_bd *pbd2, + u16 *global_data, + u32 xmit_type) +{ + u16 hlen_w = 0; + u8 outerip_off, outerip_len = 0; + + /* from outer IP to transport */ + hlen_w = (skb_inner_transport_header(skb) - + skb_network_header(skb)) >> 1; + + /* transport len */ + hlen_w += inner_tcp_hdrlen(skb) >> 1; + + pbd2->fw_ip_hdr_to_payload_w = hlen_w; + + /* outer IP header info */ + if (xmit_type & XMIT_CSUM_V4) { + struct iphdr *iph = ip_hdr(skb); + u32 csum = (__force u32)(~iph->check) - + (__force u32)iph->tot_len - + (__force u32)iph->frag_off; + + outerip_len = iph->ihl << 1; + + pbd2->fw_ip_csum_wo_len_flags_frag = + bswab16(csum_fold((__force __wsum)csum)); + } else { + pbd2->fw_ip_hdr_to_payload_w = + hlen_w - ((sizeof(struct ipv6hdr)) >> 1); + pbd_e2->data.tunnel_data.flags |= + ETH_TUNNEL_DATA_IPV6_OUTER; + } + + pbd2->tcp_send_seq = bswab32(inner_tcp_hdr(skb)->seq); + + pbd2->tcp_flags = pbd_tcp_flags(inner_tcp_hdr(skb)); + + /* inner IP header info */ + if (xmit_type & XMIT_CSUM_ENC_V4) { + pbd2->hw_ip_id = bswab16(inner_ip_hdr(skb)->id); + + pbd_e2->data.tunnel_data.pseudo_csum = + bswab16(~csum_tcpudp_magic( + inner_ip_hdr(skb)->saddr, + inner_ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); + } else { + pbd_e2->data.tunnel_data.pseudo_csum = + bswab16(~csum_ipv6_magic( + &inner_ipv6_hdr(skb)->saddr, + &inner_ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); + } + + outerip_off = (skb_network_header(skb) - skb->data) >> 1; + + *global_data |= + outerip_off | + (outerip_len << + ETH_TX_PARSE_2ND_BD_IP_HDR_LEN_OUTER_W_SHIFT) | + ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) << + ETH_TX_PARSE_2ND_BD_LLC_SNAP_EN_SHIFT); + + if (ip_hdr(skb)->protocol == IPPROTO_UDP) { + SET_FLAG(*global_data, ETH_TX_PARSE_2ND_BD_TUNNEL_UDP_EXIST, 1); + pbd2->tunnel_udp_hdr_start_w = skb_transport_offset(skb) >> 1; + } +} + +static inline void bnx2x_set_ipv6_ext_e2(struct sk_buff *skb, u32 *parsing_data, + u32 xmit_type) +{ + struct ipv6hdr *ipv6; + + if (!(xmit_type & (XMIT_GSO_ENC_V6 | XMIT_GSO_V6))) + return; + + if (xmit_type & XMIT_GSO_ENC_V6) + ipv6 = inner_ipv6_hdr(skb); + else /* XMIT_GSO_V6 */ + ipv6 = ipv6_hdr(skb); + + if (ipv6->nexthdr == NEXTHDR_IPV6) + *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR; +} + +/* called with netif_tx_lock + * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call + * netif_wake_queue() + */ +netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + struct netdev_queue *txq; + struct bnx2x_fp_txdata *txdata; + struct sw_tx_bd *tx_buf; + struct eth_tx_start_bd *tx_start_bd, *first_bd; + struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL; + struct eth_tx_parse_bd_e1x *pbd_e1x = NULL; + struct eth_tx_parse_bd_e2 *pbd_e2 = NULL; + struct eth_tx_parse_2nd_bd *pbd2 = NULL; + u32 pbd_e2_parsing_data = 0; + u16 pkt_prod, bd_prod; + int nbd, txq_index; + dma_addr_t mapping; + u32 xmit_type = bnx2x_xmit_type(bp, skb); + int i; + u8 hlen = 0; + __le16 pkt_size = 0; + struct ethhdr *eth; + u8 mac_type = UNICAST_ADDRESS; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return NETDEV_TX_BUSY; +#endif + + txq_index = skb_get_queue_mapping(skb); + txq = netdev_get_tx_queue(dev, txq_index); + + BUG_ON(txq_index >= MAX_ETH_TXQ_IDX(bp) + (CNIC_LOADED(bp) ? 1 : 0)); + + txdata = &bp->bnx2x_txq[txq_index]; + + /* enable this debug print to view the transmission queue being used + DP(NETIF_MSG_TX_QUEUED, "indices: txq %d, fp %d, txdata %d\n", + txq_index, fp_index, txdata_index); */ + + /* enable this debug print to view the transmission details + DP(NETIF_MSG_TX_QUEUED, + "transmitting packet cid %d fp index %d txdata_index %d tx_data ptr %p fp pointer %p\n", + txdata->cid, fp_index, txdata_index, txdata, fp); */ + + if (unlikely(bnx2x_tx_avail(bp, txdata) < + skb_shinfo(skb)->nr_frags + + BDS_PER_TX_PKT + + NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))) { + /* Handle special storage cases separately */ + if (txdata->tx_ring_size == 0) { + struct bnx2x_eth_q_stats *q_stats = + bnx2x_fp_qstats(bp, txdata->parent_fp); + q_stats->driver_filtered_tx_pkt++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; + netif_tx_stop_queue(txq); + BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); + + return NETDEV_TX_BUSY; + } + + DP(NETIF_MSG_TX_QUEUED, + "queue[%d]: SKB: summed %x protocol %x protocol(%x,%x) gso type %x xmit_type %x len %d\n", + txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, + ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type, + skb->len); + + eth = (struct ethhdr *)skb->data; + + /* set flag according to packet type (UNICAST_ADDRESS is default)*/ + if (unlikely(is_multicast_ether_addr(eth->h_dest))) { + if (is_broadcast_ether_addr(eth->h_dest)) + mac_type = BROADCAST_ADDRESS; + else + mac_type = MULTICAST_ADDRESS; + } + +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - BDS_PER_TX_PKT) + /* First, check if we need to linearize the skb (due to FW + restrictions). No need to check fragmentation if page size > 8K + (there will be no violation to FW restrictions) */ + if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { + /* Statistics of linearization */ + bp->lin_cnt++; + if (skb_linearize(skb) != 0) { + DP(NETIF_MSG_TX_QUEUED, + "SKB linearization failed - silently dropping this SKB\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } +#endif + /* Map skb linear data for DMA */ + mapping = dma_map_single(&bp->pdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + DP(NETIF_MSG_TX_QUEUED, + "SKB mapping failed - silently dropping this SKB\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* + Please read carefully. First we use one BD which we mark as start, + then we have a parsing info BD (used for TSO or xsum), + and only then we have the rest of the TSO BDs. + (don't forget to mark the last one as last, + and to unmap only AFTER you write to the BD ...) + And above all, all pdb sizes are in words - NOT DWORDS! + */ + + /* get current pkt produced now - advance it just before sending packet + * since mapping of pages may fail and cause packet to be dropped + */ + pkt_prod = txdata->tx_pkt_prod; + bd_prod = TX_BD(txdata->tx_bd_prod); + + /* get a tx_buf and first BD + * tx_start_bd may be changed during SPLIT, + * but first_bd will always stay first + */ + tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)]; + tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd; + first_bd = tx_start_bd; + + tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD; + + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { + if (!(bp->flags & TX_TIMESTAMPING_EN)) { + bp->eth_stats.ptp_skip_tx_ts++; + BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n"); + } else if (bp->ptp_tx_skb) { + bp->eth_stats.ptp_skip_tx_ts++; + netdev_err_once(bp->dev, + "Device supports only a single outstanding packet to timestamp, this packet won't be timestamped\n"); + } else { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + /* schedule check for Tx timestamp */ + bp->ptp_tx_skb = skb_get(skb); + bp->ptp_tx_start = jiffies; + schedule_work(&bp->ptp_task); + } + } + + /* header nbd: indirectly zero other flags! */ + tx_start_bd->general_data = 1 << ETH_TX_START_BD_HDR_NBDS_SHIFT; + + /* remember the first BD of the packet */ + tx_buf->first_bd = txdata->tx_bd_prod; + tx_buf->skb = skb; + tx_buf->flags = 0; + + DP(NETIF_MSG_TX_QUEUED, + "sending pkt %u @%p next_idx %u bd %u @%p\n", + pkt_prod, tx_buf, txdata->tx_pkt_prod, bd_prod, tx_start_bd); + + if (skb_vlan_tag_present(skb)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(skb_vlan_tag_get(skb)); + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + } else { + /* when transmitting in a vf, start bd must hold the ethertype + * for fw to enforce it + */ + u16 vlan_tci = 0; +#ifndef BNX2X_STOP_ON_ERROR + if (IS_VF(bp)) { +#endif + /* Still need to consider inband vlan for enforced */ + if (__vlan_get_tag(skb, &vlan_tci)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_INBAND_VLAN << + ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tci); + } +#ifndef BNX2X_STOP_ON_ERROR + } else { + /* used by FW for packet accounting */ + tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } +#endif + } + + nbd = 2; /* start_bd + pbd + frags (updated when pages are mapped) */ + + /* turn on parsing and get a BD */ + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + + if (xmit_type & XMIT_CSUM) + bnx2x_set_sbd_csum(bp, skb, tx_start_bd, xmit_type); + + if (!CHIP_IS_E1x(bp)) { + pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2; + memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2)); + + if (xmit_type & XMIT_CSUM_ENC) { + u16 global_data = 0; + + /* Set PBD in enc checksum offload case */ + hlen = bnx2x_set_pbd_csum_enc(bp, skb, + &pbd_e2_parsing_data, + xmit_type); + + /* turn on 2nd parsing and get a BD */ + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + + pbd2 = &txdata->tx_desc_ring[bd_prod].parse_2nd_bd; + + memset(pbd2, 0, sizeof(*pbd2)); + + pbd_e2->data.tunnel_data.ip_hdr_start_inner_w = + (skb_inner_network_header(skb) - + skb->data) >> 1; + + if (xmit_type & XMIT_GSO_ENC) + bnx2x_update_pbds_gso_enc(skb, pbd_e2, pbd2, + &global_data, + xmit_type); + + pbd2->global_data = cpu_to_le16(global_data); + + /* add addition parse BD indication to start BD */ + SET_FLAG(tx_start_bd->general_data, + ETH_TX_START_BD_PARSE_NBDS, 1); + /* set encapsulation flag in start BD */ + SET_FLAG(tx_start_bd->general_data, + ETH_TX_START_BD_TUNNEL_EXIST, 1); + + tx_buf->flags |= BNX2X_HAS_SECOND_PBD; + + nbd++; + } else if (xmit_type & XMIT_CSUM) { + /* Set PBD in checksum offload case w/o encapsulation */ + hlen = bnx2x_set_pbd_csum_e2(bp, skb, + &pbd_e2_parsing_data, + xmit_type); + } + + bnx2x_set_ipv6_ext_e2(skb, &pbd_e2_parsing_data, xmit_type); + /* Add the macs to the parsing BD if this is a vf or if + * Tx Switching is enabled. + */ + if (IS_VF(bp)) { + /* override GRE parameters in BD */ + bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.src_hi, + &pbd_e2->data.mac_addr.src_mid, + &pbd_e2->data.mac_addr.src_lo, + eth->h_source); + + bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.dst_hi, + &pbd_e2->data.mac_addr.dst_mid, + &pbd_e2->data.mac_addr.dst_lo, + eth->h_dest); + } else { + if (bp->flags & TX_SWITCHING) + bnx2x_set_fw_mac_addr( + &pbd_e2->data.mac_addr.dst_hi, + &pbd_e2->data.mac_addr.dst_mid, + &pbd_e2->data.mac_addr.dst_lo, + eth->h_dest); +#ifdef BNX2X_STOP_ON_ERROR + /* Enforce security is always set in Stop on Error - + * source mac should be present in the parsing BD + */ + bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.src_hi, + &pbd_e2->data.mac_addr.src_mid, + &pbd_e2->data.mac_addr.src_lo, + eth->h_source); +#endif + } + + SET_FLAG(pbd_e2_parsing_data, + ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE, mac_type); + } else { + u16 global_data = 0; + pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x; + memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x)); + /* Set PBD in checksum offload case */ + if (xmit_type & XMIT_CSUM) + hlen = bnx2x_set_pbd_csum(bp, skb, pbd_e1x, xmit_type); + + SET_FLAG(global_data, + ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE, mac_type); + pbd_e1x->global_data |= cpu_to_le16(global_data); + } + + /* Setup the data pointer of the first BD of the packet */ + tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb)); + pkt_size = tx_start_bd->nbytes; + + DP(NETIF_MSG_TX_QUEUED, + "first bd @%p addr (%x:%x) nbytes %d flags %x vlan %x\n", + tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo, + le16_to_cpu(tx_start_bd->nbytes), + tx_start_bd->bd_flags.as_bitfield, + le16_to_cpu(tx_start_bd->vlan_or_ethertype)); + + if (xmit_type & XMIT_GSO) { + + DP(NETIF_MSG_TX_QUEUED, + "TSO packet len %d hlen %d total len %d tso size %d\n", + skb->len, hlen, skb_headlen(skb), + skb_shinfo(skb)->gso_size); + + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO; + + if (unlikely(skb_headlen(skb) > hlen)) { + nbd++; + bd_prod = bnx2x_tx_split(bp, txdata, tx_buf, + &tx_start_bd, hlen, + bd_prod); + } + if (!CHIP_IS_E1x(bp)) + pbd_e2_parsing_data |= + (skb_shinfo(skb)->gso_size << + ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) & + ETH_TX_PARSE_BD_E2_LSO_MSS; + else + bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type); + } + + /* Set the PBD's parsing_data field if not zero + * (for the chips newer than 57711). + */ + if (pbd_e2_parsing_data) + pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data); + + tx_data_bd = (struct eth_tx_bd *)tx_start_bd; + + /* Handle fragmented skb */ + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + mapping = skb_frag_dma_map(&bp->pdev->dev, frag, 0, + skb_frag_size(frag), DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + unsigned int pkts_compl = 0, bytes_compl = 0; + + DP(NETIF_MSG_TX_QUEUED, + "Unable to map page - dropping packet...\n"); + + /* we need unmap all buffers already mapped + * for this SKB; + * first_bd->nbd need to be properly updated + * before call to bnx2x_free_tx_pkt + */ + first_bd->nbd = cpu_to_le16(nbd); + bnx2x_free_tx_pkt(bp, txdata, + TX_BD(txdata->tx_pkt_prod), + &pkts_compl, &bytes_compl); + return NETDEV_TX_OK; + } + + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + tx_data_bd = &txdata->tx_desc_ring[bd_prod].reg_bd; + if (total_pkt_bd == NULL) + total_pkt_bd = &txdata->tx_desc_ring[bd_prod].reg_bd; + + tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + tx_data_bd->nbytes = cpu_to_le16(skb_frag_size(frag)); + le16_add_cpu(&pkt_size, skb_frag_size(frag)); + nbd++; + + DP(NETIF_MSG_TX_QUEUED, + "frag %d bd @%p addr (%x:%x) nbytes %d\n", + i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo, + le16_to_cpu(tx_data_bd->nbytes)); + } + + DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd); + + /* update with actual num BDs */ + first_bd->nbd = cpu_to_le16(nbd); + + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + + /* now send a tx doorbell, counting the next BD + * if the packet contains or ends with it + */ + if (TX_BD_POFF(bd_prod) < nbd) + nbd++; + + /* total_pkt_bytes should be set on the first data BD if + * it's not an LSO packet and there is more than one + * data BD. In this case pkt_size is limited by an MTU value. + * However we prefer to set it for an LSO packet (while we don't + * have to) in order to save some CPU cycles in a none-LSO + * case, when we much more care about them. + */ + if (total_pkt_bd != NULL) + total_pkt_bd->total_pkt_bytes = pkt_size; + + if (pbd_e1x) + DP(NETIF_MSG_TX_QUEUED, + "PBD (E1X) @%p ip_data %x ip_hlen %u ip_id %u lso_mss %u tcp_flags %x xsum %x seq %u hlen %u\n", + pbd_e1x, pbd_e1x->global_data, pbd_e1x->ip_hlen_w, + pbd_e1x->ip_id, pbd_e1x->lso_mss, pbd_e1x->tcp_flags, + pbd_e1x->tcp_pseudo_csum, pbd_e1x->tcp_send_seq, + le16_to_cpu(pbd_e1x->total_hlen_w)); + if (pbd_e2) + DP(NETIF_MSG_TX_QUEUED, + "PBD (E2) @%p dst %x %x %x src %x %x %x parsing_data %x\n", + pbd_e2, + pbd_e2->data.mac_addr.dst_hi, + pbd_e2->data.mac_addr.dst_mid, + pbd_e2->data.mac_addr.dst_lo, + pbd_e2->data.mac_addr.src_hi, + pbd_e2->data.mac_addr.src_mid, + pbd_e2->data.mac_addr.src_lo, + pbd_e2->parsing_data); + DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d bd %u\n", nbd, bd_prod); + + netdev_tx_sent_queue(txq, skb->len); + + skb_tx_timestamp(skb); + + txdata->tx_pkt_prod++; + /* + * Make sure that the BD data is updated before updating the producer + * since FW might read the BD right after the producer is updated. + * This is only applicable for weak-ordered memory model archs such + * as IA-64. The following barrier is also mandatory since FW will + * assumes packets must have BDs. + */ + wmb(); + + txdata->tx_db.data.prod += nbd; + /* make sure descriptor update is observed by HW */ + wmb(); + + DOORBELL_RELAXED(bp, txdata->cid, txdata->tx_db.raw); + + mmiowb(); + + txdata->tx_bd_prod += nbd; + + if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_DESC_PER_TX_PKT)) { + netif_tx_stop_queue(txq); + + /* paired memory barrier is in bnx2x_tx_int(), we have to keep + * ordering of set_bit() in netif_tx_stop_queue() and read of + * fp->bd_tx_cons */ + smp_mb(); + + bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; + if (bnx2x_tx_avail(bp, txdata) >= MAX_DESC_PER_TX_PKT) + netif_tx_wake_queue(txq); + } + txdata->tx_pkt++; + + return NETDEV_TX_OK; +} + +void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default) +{ + int mfw_vn = BP_FW_MB_IDX(bp); + u32 tmp; + + /* If the shmem shouldn't affect configuration, reflect */ + if (!IS_MF_BD(bp)) { + int i; + + for (i = 0; i < BNX2X_MAX_PRIORITY; i++) + c2s_map[i] = i; + *c2s_default = 0; + + return; + } + + tmp = SHMEM2_RD(bp, c2s_pcp_map_lower[mfw_vn]); + tmp = (__force u32)be32_to_cpu((__force __be32)tmp); + c2s_map[0] = tmp & 0xff; + c2s_map[1] = (tmp >> 8) & 0xff; + c2s_map[2] = (tmp >> 16) & 0xff; + c2s_map[3] = (tmp >> 24) & 0xff; + + tmp = SHMEM2_RD(bp, c2s_pcp_map_upper[mfw_vn]); + tmp = (__force u32)be32_to_cpu((__force __be32)tmp); + c2s_map[4] = tmp & 0xff; + c2s_map[5] = (tmp >> 8) & 0xff; + c2s_map[6] = (tmp >> 16) & 0xff; + c2s_map[7] = (tmp >> 24) & 0xff; + + tmp = SHMEM2_RD(bp, c2s_pcp_map_default[mfw_vn]); + tmp = (__force u32)be32_to_cpu((__force __be32)tmp); + *c2s_default = (tmp >> (8 * mfw_vn)) & 0xff; +} + +/** + * bnx2x_setup_tc - routine to configure net_device for multi tc + * + * @netdev: net device to configure + * @tc: number of traffic classes to enable + * + * callback connected to the ndo_setup_tc function pointer + */ +int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) +{ + struct bnx2x *bp = netdev_priv(dev); + u8 c2s_map[BNX2X_MAX_PRIORITY], c2s_def; + int cos, prio, count, offset; + + /* setup tc must be called under rtnl lock */ + ASSERT_RTNL(); + + /* no traffic classes requested. Aborting */ + if (!num_tc) { + netdev_reset_tc(dev); + return 0; + } + + /* requested to support too many traffic classes */ + if (num_tc > bp->max_cos) { + BNX2X_ERR("support for too many traffic classes requested: %d. Max supported is %d\n", + num_tc, bp->max_cos); + return -EINVAL; + } + + /* declare amount of supported traffic classes */ + if (netdev_set_num_tc(dev, num_tc)) { + BNX2X_ERR("failed to declare %d traffic classes\n", num_tc); + return -EINVAL; + } + + bnx2x_get_c2s_mapping(bp, c2s_map, &c2s_def); + + /* configure priority to traffic class mapping */ + for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) { + int outer_prio = c2s_map[prio]; + + netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[outer_prio]); + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "mapping priority %d to tc %d\n", + outer_prio, bp->prio_to_cos[outer_prio]); + } + + /* Use this configuration to differentiate tc0 from other COSes + This can be used for ets or pfc, and save the effort of setting + up a multio class queue disc or negotiating DCBX with a switch + netdev_set_prio_tc_map(dev, 0, 0); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0); + for (prio = 1; prio < 16; prio++) { + netdev_set_prio_tc_map(dev, prio, 1); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1); + } */ + + /* configure traffic class to transmission queue mapping */ + for (cos = 0; cos < bp->max_cos; cos++) { + count = BNX2X_NUM_ETH_QUEUES(bp); + offset = cos * BNX2X_NUM_NON_CNIC_QUEUES(bp); + netdev_set_tc_queue(dev, cos, count, offset); + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "mapping tc %d to offset %d count %d\n", + cos, offset, count); + } + + return 0; +} + +int __bnx2x_setup_tc(struct net_device *dev, enum tc_setup_type type, + void *type_data) +{ + struct tc_mqprio_qopt *mqprio = type_data; + + if (type != TC_SETUP_QDISC_MQPRIO) + return -EOPNOTSUPP; + + mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS; + + return bnx2x_setup_tc(dev, mqprio->num_tc); +} + +/* called with rtnl_lock */ +int bnx2x_change_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct bnx2x *bp = netdev_priv(dev); + int rc = 0; + + if (!is_valid_ether_addr(addr->sa_data)) { + BNX2X_ERR("Requested MAC address is not valid\n"); + return -EINVAL; + } + + if (IS_MF_STORAGE_ONLY(bp)) { + BNX2X_ERR("Can't change address on STORAGE ONLY function\n"); + return -EINVAL; + } + + if (netif_running(dev)) { + rc = bnx2x_set_eth_mac(bp, false); + if (rc) + return rc; + } + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + if (netif_running(dev)) + rc = bnx2x_set_eth_mac(bp, true); + + if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg)) + SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS); + + return rc; +} + +static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index) +{ + union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk); + struct bnx2x_fastpath *fp = &bp->fp[fp_index]; + u8 cos; + + /* Common */ + + if (IS_FCOE_IDX(fp_index)) { + memset(sb, 0, sizeof(union host_hc_status_block)); + fp->status_blk_mapping = 0; + } else { + /* status blocks */ + if (!CHIP_IS_E1x(bp)) + BNX2X_PCI_FREE(sb->e2_sb, + bnx2x_fp(bp, fp_index, + status_blk_mapping), + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_FREE(sb->e1x_sb, + bnx2x_fp(bp, fp_index, + status_blk_mapping), + sizeof(struct host_hc_status_block_e1x)); + } + + /* Rx */ + if (!skip_rx_queue(bp, fp_index)) { + bnx2x_free_rx_bds(fp); + + /* fastpath rx rings: rx_buf rx_desc rx_comp */ + BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring)); + BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring), + bnx2x_fp(bp, fp_index, rx_desc_mapping), + sizeof(struct eth_rx_bd) * NUM_RX_BD); + + BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring), + bnx2x_fp(bp, fp_index, rx_comp_mapping), + sizeof(struct eth_fast_path_rx_cqe) * + NUM_RCQ_BD); + + /* SGE ring */ + BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring)); + BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring), + bnx2x_fp(bp, fp_index, rx_sge_mapping), + BCM_PAGE_SIZE * NUM_RX_SGE_PAGES); + } + + /* Tx */ + if (!skip_tx_queue(bp, fp_index)) { + /* fastpath tx rings: tx_buf tx_desc */ + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; + + DP(NETIF_MSG_IFDOWN, + "freeing tx memory of fp %d cos %d cid %d\n", + fp_index, cos, txdata->cid); + + BNX2X_FREE(txdata->tx_buf_ring); + BNX2X_PCI_FREE(txdata->tx_desc_ring, + txdata->tx_desc_mapping, + sizeof(union eth_tx_bd_types) * NUM_TX_BD); + } + } + /* end of fastpath */ +} + +static void bnx2x_free_fp_mem_cnic(struct bnx2x *bp) +{ + int i; + for_each_cnic_queue(bp, i) + bnx2x_free_fp_mem_at(bp, i); +} + +void bnx2x_free_fp_mem(struct bnx2x *bp) +{ + int i; + for_each_eth_queue(bp, i) + bnx2x_free_fp_mem_at(bp, i); +} + +static void set_sb_shortcuts(struct bnx2x *bp, int index) +{ + union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk); + if (!CHIP_IS_E1x(bp)) { + bnx2x_fp(bp, index, sb_index_values) = + (__le16 *)status_blk.e2_sb->sb.index_values; + bnx2x_fp(bp, index, sb_running_index) = + (__le16 *)status_blk.e2_sb->sb.running_index; + } else { + bnx2x_fp(bp, index, sb_index_values) = + (__le16 *)status_blk.e1x_sb->sb.index_values; + bnx2x_fp(bp, index, sb_running_index) = + (__le16 *)status_blk.e1x_sb->sb.running_index; + } +} + +/* Returns the number of actually allocated BDs */ +static int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp, + int rx_ring_size) +{ + struct bnx2x *bp = fp->bp; + u16 ring_prod, cqe_ring_prod; + int i, failure_cnt = 0; + + fp->rx_comp_cons = 0; + cqe_ring_prod = ring_prod = 0; + + /* This routine is called only during fo init so + * fp->eth_q_stats.rx_skb_alloc_failed = 0 + */ + for (i = 0; i < rx_ring_size; i++) { + if (bnx2x_alloc_rx_data(bp, fp, ring_prod, GFP_KERNEL) < 0) { + failure_cnt++; + continue; + } + ring_prod = NEXT_RX_IDX(ring_prod); + cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod); + WARN_ON(ring_prod <= (i - failure_cnt)); + } + + if (failure_cnt) + BNX2X_ERR("was only able to allocate %d rx skbs on queue[%d]\n", + i - failure_cnt, fp->index); + + fp->rx_bd_prod = ring_prod; + /* Limit the CQE producer by the CQE ring size */ + fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT, + cqe_ring_prod); + + bnx2x_fp_stats(bp, fp)->eth_q_stats.rx_skb_alloc_failed += failure_cnt; + + return i - failure_cnt; +} + +static void bnx2x_set_next_page_rx_cq(struct bnx2x_fastpath *fp) +{ + int i; + + for (i = 1; i <= NUM_RCQ_RINGS; i++) { + struct eth_rx_cqe_next_page *nextpg; + + nextpg = (struct eth_rx_cqe_next_page *) + &fp->rx_comp_ring[RCQ_DESC_CNT * i - 1]; + nextpg->addr_hi = + cpu_to_le32(U64_HI(fp->rx_comp_mapping + + BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS))); + nextpg->addr_lo = + cpu_to_le32(U64_LO(fp->rx_comp_mapping + + BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS))); + } +} + +static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) +{ + union host_hc_status_block *sb; + struct bnx2x_fastpath *fp = &bp->fp[index]; + int ring_size = 0; + u8 cos; + int rx_ring_size = 0; + + if (!bp->rx_ring_size && IS_MF_STORAGE_ONLY(bp)) { + rx_ring_size = MIN_RX_SIZE_NONTPA; + bp->rx_ring_size = rx_ring_size; + } else if (!bp->rx_ring_size) { + rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp); + + if (CHIP_IS_E3(bp)) { + u32 cfg = SHMEM_RD(bp, + dev_info.port_hw_config[BP_PORT(bp)]. + default_cfg); + + /* Decrease ring size for 1G functions */ + if ((cfg & PORT_HW_CFG_NET_SERDES_IF_MASK) == + PORT_HW_CFG_NET_SERDES_IF_SGMII) + rx_ring_size /= 10; + } + + /* allocate at least number of buffers required by FW */ + rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA : + MIN_RX_SIZE_TPA, rx_ring_size); + + bp->rx_ring_size = rx_ring_size; + } else /* if rx_ring_size specified - use it */ + rx_ring_size = bp->rx_ring_size; + + DP(BNX2X_MSG_SP, "calculated rx_ring_size %d\n", rx_ring_size); + + /* Common */ + sb = &bnx2x_fp(bp, index, status_blk); + + if (!IS_FCOE_IDX(index)) { + /* status blocks */ + if (!CHIP_IS_E1x(bp)) { + sb->e2_sb = BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, status_blk_mapping), + sizeof(struct host_hc_status_block_e2)); + if (!sb->e2_sb) + goto alloc_mem_err; + } else { + sb->e1x_sb = BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, status_blk_mapping), + sizeof(struct host_hc_status_block_e1x)); + if (!sb->e1x_sb) + goto alloc_mem_err; + } + } + + /* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to + * set shortcuts for it. + */ + if (!IS_FCOE_IDX(index)) + set_sb_shortcuts(bp, index); + + /* Tx */ + if (!skip_tx_queue(bp, index)) { + /* fastpath tx rings: tx_buf tx_desc */ + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; + + DP(NETIF_MSG_IFUP, + "allocating tx memory of fp %d cos %d\n", + index, cos); + + txdata->tx_buf_ring = kcalloc(NUM_TX_BD, + sizeof(struct sw_tx_bd), + GFP_KERNEL); + if (!txdata->tx_buf_ring) + goto alloc_mem_err; + txdata->tx_desc_ring = BNX2X_PCI_ALLOC(&txdata->tx_desc_mapping, + sizeof(union eth_tx_bd_types) * NUM_TX_BD); + if (!txdata->tx_desc_ring) + goto alloc_mem_err; + } + } + + /* Rx */ + if (!skip_rx_queue(bp, index)) { + /* fastpath rx rings: rx_buf rx_desc rx_comp */ + bnx2x_fp(bp, index, rx_buf_ring) = + kcalloc(NUM_RX_BD, sizeof(struct sw_rx_bd), GFP_KERNEL); + if (!bnx2x_fp(bp, index, rx_buf_ring)) + goto alloc_mem_err; + bnx2x_fp(bp, index, rx_desc_ring) = + BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, rx_desc_mapping), + sizeof(struct eth_rx_bd) * NUM_RX_BD); + if (!bnx2x_fp(bp, index, rx_desc_ring)) + goto alloc_mem_err; + + /* Seed all CQEs by 1s */ + bnx2x_fp(bp, index, rx_comp_ring) = + BNX2X_PCI_FALLOC(&bnx2x_fp(bp, index, rx_comp_mapping), + sizeof(struct eth_fast_path_rx_cqe) * NUM_RCQ_BD); + if (!bnx2x_fp(bp, index, rx_comp_ring)) + goto alloc_mem_err; + + /* SGE ring */ + bnx2x_fp(bp, index, rx_page_ring) = + kcalloc(NUM_RX_SGE, sizeof(struct sw_rx_page), + GFP_KERNEL); + if (!bnx2x_fp(bp, index, rx_page_ring)) + goto alloc_mem_err; + bnx2x_fp(bp, index, rx_sge_ring) = + BNX2X_PCI_ALLOC(&bnx2x_fp(bp, index, rx_sge_mapping), + BCM_PAGE_SIZE * NUM_RX_SGE_PAGES); + if (!bnx2x_fp(bp, index, rx_sge_ring)) + goto alloc_mem_err; + /* RX BD ring */ + bnx2x_set_next_page_rx_bd(fp); + + /* CQ ring */ + bnx2x_set_next_page_rx_cq(fp); + + /* BDs */ + ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size); + if (ring_size < rx_ring_size) + goto alloc_mem_err; + } + + return 0; + +/* handles low memory cases */ +alloc_mem_err: + BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n", + index, ring_size); + /* FW will drop all packets if queue is not big enough, + * In these cases we disable the queue + * Min size is different for OOO, TPA and non-TPA queues + */ + if (ring_size < (fp->mode == TPA_MODE_DISABLED ? + MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) { + /* release memory allocated for this queue */ + bnx2x_free_fp_mem_at(bp, index); + return -ENOMEM; + } + return 0; +} + +static int bnx2x_alloc_fp_mem_cnic(struct bnx2x *bp) +{ + if (!NO_FCOE(bp)) + /* FCoE */ + if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX(bp))) + /* we will fail load process instead of mark + * NO_FCOE_FLAG + */ + return -ENOMEM; + + return 0; +} + +static int bnx2x_alloc_fp_mem(struct bnx2x *bp) +{ + int i; + + /* 1. Allocate FP for leading - fatal if error + * 2. Allocate RSS - fix number of queues if error + */ + + /* leading */ + if (bnx2x_alloc_fp_mem_at(bp, 0)) + return -ENOMEM; + + /* RSS */ + for_each_nondefault_eth_queue(bp, i) + if (bnx2x_alloc_fp_mem_at(bp, i)) + break; + + /* handle memory failures */ + if (i != BNX2X_NUM_ETH_QUEUES(bp)) { + int delta = BNX2X_NUM_ETH_QUEUES(bp) - i; + + WARN_ON(delta < 0); + bnx2x_shrink_eth_fp(bp, delta); + if (CNIC_SUPPORT(bp)) + /* move non eth FPs next to last eth FP + * must be done in that order + * FCOE_IDX < FWD_IDX < OOO_IDX + */ + + /* move FCoE fp even NO_FCOE_FLAG is on */ + bnx2x_move_fp(bp, FCOE_IDX(bp), FCOE_IDX(bp) - delta); + bp->num_ethernet_queues -= delta; + bp->num_queues = bp->num_ethernet_queues + + bp->num_cnic_queues; + BNX2X_ERR("Adjusted num of queues from %d to %d\n", + bp->num_queues + delta, bp->num_queues); + } + + return 0; +} + +void bnx2x_free_mem_bp(struct bnx2x *bp) +{ + int i; + + for (i = 0; i < bp->fp_array_size; i++) + kfree(bp->fp[i].tpa_info); + kfree(bp->fp); + kfree(bp->sp_objs); + kfree(bp->fp_stats); + kfree(bp->bnx2x_txq); + kfree(bp->msix_table); + kfree(bp->ilt); +} + +int bnx2x_alloc_mem_bp(struct bnx2x *bp) +{ + struct bnx2x_fastpath *fp; + struct msix_entry *tbl; + struct bnx2x_ilt *ilt; + int msix_table_size = 0; + int fp_array_size, txq_array_size; + int i; + + /* + * The biggest MSI-X table we might need is as a maximum number of fast + * path IGU SBs plus default SB (for PF only). + */ + msix_table_size = bp->igu_sb_cnt; + if (IS_PF(bp)) + msix_table_size++; + BNX2X_DEV_INFO("msix_table_size %d\n", msix_table_size); + + /* fp array: RSS plus CNIC related L2 queues */ + fp_array_size = BNX2X_MAX_RSS_COUNT(bp) + CNIC_SUPPORT(bp); + bp->fp_array_size = fp_array_size; + BNX2X_DEV_INFO("fp_array_size %d\n", bp->fp_array_size); + + fp = kcalloc(bp->fp_array_size, sizeof(*fp), GFP_KERNEL); + if (!fp) + goto alloc_err; + for (i = 0; i < bp->fp_array_size; i++) { + fp[i].tpa_info = + kcalloc(ETH_MAX_AGGREGATION_QUEUES_E1H_E2, + sizeof(struct bnx2x_agg_info), GFP_KERNEL); + if (!(fp[i].tpa_info)) + goto alloc_err; + } + + bp->fp = fp; + + /* allocate sp objs */ + bp->sp_objs = kcalloc(bp->fp_array_size, sizeof(struct bnx2x_sp_objs), + GFP_KERNEL); + if (!bp->sp_objs) + goto alloc_err; + + /* allocate fp_stats */ + bp->fp_stats = kcalloc(bp->fp_array_size, sizeof(struct bnx2x_fp_stats), + GFP_KERNEL); + if (!bp->fp_stats) + goto alloc_err; + + /* Allocate memory for the transmission queues array */ + txq_array_size = + BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS + CNIC_SUPPORT(bp); + BNX2X_DEV_INFO("txq_array_size %d", txq_array_size); + + bp->bnx2x_txq = kcalloc(txq_array_size, sizeof(struct bnx2x_fp_txdata), + GFP_KERNEL); + if (!bp->bnx2x_txq) + goto alloc_err; + + /* msix table */ + tbl = kcalloc(msix_table_size, sizeof(*tbl), GFP_KERNEL); + if (!tbl) + goto alloc_err; + bp->msix_table = tbl; + + /* ilt */ + ilt = kzalloc(sizeof(*ilt), GFP_KERNEL); + if (!ilt) + goto alloc_err; + bp->ilt = ilt; + + return 0; +alloc_err: + bnx2x_free_mem_bp(bp); + return -ENOMEM; +} + +int bnx2x_reload_if_running(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (unlikely(!netif_running(dev))) + return 0; + + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); + return bnx2x_nic_load(bp, LOAD_NORMAL); +} + +int bnx2x_get_cur_phy_idx(struct bnx2x *bp) +{ + u32 sel_phy_idx = 0; + if (bp->link_params.num_phys <= 1) + return INT_PHY; + + if (bp->link_vars.link_up) { + sel_phy_idx = EXT_PHY1; + /* In case link is SERDES, check if the EXT_PHY2 is the one */ + if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) && + (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE)) + sel_phy_idx = EXT_PHY2; + } else { + + switch (bnx2x_phy_selection(&bp->link_params)) { + case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + sel_phy_idx = EXT_PHY1; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + sel_phy_idx = EXT_PHY2; + break; + } + } + + return sel_phy_idx; +} +int bnx2x_get_link_cfg_idx(struct bnx2x *bp) +{ + u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp); + /* + * The selected activated PHY is always after swapping (in case PHY + * swapping is enabled). So when swapping is enabled, we need to reverse + * the configuration + */ + + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) { + if (sel_phy_idx == EXT_PHY1) + sel_phy_idx = EXT_PHY2; + else if (sel_phy_idx == EXT_PHY2) + sel_phy_idx = EXT_PHY1; + } + return LINK_CONFIG_IDX(sel_phy_idx); +} + +#ifdef NETDEV_FCOE_WWNN +int bnx2x_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + switch (type) { + case NETDEV_FCOE_WWNN: + *wwn = HILO_U64(cp->fcoe_wwn_node_name_hi, + cp->fcoe_wwn_node_name_lo); + break; + case NETDEV_FCOE_WWPN: + *wwn = HILO_U64(cp->fcoe_wwn_port_name_hi, + cp->fcoe_wwn_port_name_lo); + break; + default: + BNX2X_ERR("Wrong WWN type requested - %d\n", type); + return -EINVAL; + } + + return 0; +} +#endif + +/* called with rtnl_lock */ +int bnx2x_change_mtu(struct net_device *dev, int new_mtu) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); + return -EPERM; + } + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + BNX2X_ERR("Can't perform change MTU during parity recovery\n"); + return -EAGAIN; + } + + /* This does not race with packet allocation + * because the actual alloc size is + * only updated as part of load + */ + dev->mtu = new_mtu; + + if (!bnx2x_mtu_allows_gro(new_mtu)) + dev->features &= ~NETIF_F_GRO_HW; + + if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg)) + SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS); + + return bnx2x_reload_if_running(dev); +} + +netdev_features_t bnx2x_fix_features(struct net_device *dev, + netdev_features_t features) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (pci_num_vf(bp->pdev)) { + netdev_features_t changed = dev->features ^ features; + + /* Revert the requested changes in features if they + * would require internal reload of PF in bnx2x_set_features(). + */ + if (!(features & NETIF_F_RXCSUM) && !bp->disable_tpa) { + features &= ~NETIF_F_RXCSUM; + features |= dev->features & NETIF_F_RXCSUM; + } + + if (changed & NETIF_F_LOOPBACK) { + features &= ~NETIF_F_LOOPBACK; + features |= dev->features & NETIF_F_LOOPBACK; + } + } + + /* TPA requires Rx CSUM offloading */ + if (!(features & NETIF_F_RXCSUM)) + features &= ~NETIF_F_LRO; + + if (!(features & NETIF_F_GRO) || !bnx2x_mtu_allows_gro(dev->mtu)) + features &= ~NETIF_F_GRO_HW; + if (features & NETIF_F_GRO_HW) + features &= ~NETIF_F_LRO; + + return features; +} + +int bnx2x_set_features(struct net_device *dev, netdev_features_t features) +{ + struct bnx2x *bp = netdev_priv(dev); + netdev_features_t changes = features ^ dev->features; + bool bnx2x_reload = false; + int rc; + + /* VFs or non SRIOV PFs should be able to change loopback feature */ + if (!pci_num_vf(bp->pdev)) { + if (features & NETIF_F_LOOPBACK) { + if (bp->link_params.loopback_mode != LOOPBACK_BMAC) { + bp->link_params.loopback_mode = LOOPBACK_BMAC; + bnx2x_reload = true; + } + } else { + if (bp->link_params.loopback_mode != LOOPBACK_NONE) { + bp->link_params.loopback_mode = LOOPBACK_NONE; + bnx2x_reload = true; + } + } + } + + /* Don't care about GRO changes */ + changes &= ~NETIF_F_GRO; + + if (changes) + bnx2x_reload = true; + + if (bnx2x_reload) { + if (bp->recovery_state == BNX2X_RECOVERY_DONE) { + dev->features = features; + rc = bnx2x_reload_if_running(dev); + return rc ? rc : 1; + } + /* else: bnx2x_nic_load() will be called at end of recovery */ + } + + return 0; +} + +void bnx2x_tx_timeout(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* We want the information of the dump logged, + * but calling bnx2x_panic() would kill all chances of recovery. + */ + if (!bp->panic) +#ifndef BNX2X_STOP_ON_ERROR + bnx2x_panic_dump(bp, false); +#else + bnx2x_panic(); +#endif + + /* This allows the netif to be shutdown gracefully before resetting */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_TX_TIMEOUT, 0); +} + +int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + bp = netdev_priv(dev); + + rtnl_lock(); + + pci_save_state(pdev); + + if (!netif_running(dev)) { + rtnl_unlock(); + return 0; + } + + netif_device_detach(dev); + + bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); + + bnx2x_set_power_state(bp, pci_choose_state(pdev, state)); + + rtnl_unlock(); + + return 0; +} + +int bnx2x_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + int rc; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + bp = netdev_priv(dev); + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + BNX2X_ERR("Handling parity error recovery. Try again later\n"); + return -EAGAIN; + } + + rtnl_lock(); + + pci_restore_state(pdev); + + if (!netif_running(dev)) { + rtnl_unlock(); + return 0; + } + + bnx2x_set_power_state(bp, PCI_D0); + netif_device_attach(dev); + + rc = bnx2x_nic_load(bp, LOAD_OPEN); + + rtnl_unlock(); + + return rc; +} + +void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt, + u32 cid) +{ + if (!cxt) { + BNX2X_ERR("bad context pointer %p\n", cxt); + return; + } + + /* ustorm cxt validation */ + cxt->ustorm_ag_context.cdu_usage = + CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid), + CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE); + /* xcontext validation */ + cxt->xstorm_ag_context.cdu_reserved = + CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid), + CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE); +} + +static void storm_memset_hc_timeout(struct bnx2x *bp, u8 port, + u8 fw_sb_id, u8 sb_index, + u8 ticks) +{ + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index); + REG_WR8(bp, addr, ticks); + DP(NETIF_MSG_IFUP, + "port %x fw_sb_id %d sb_index %d ticks %d\n", + port, fw_sb_id, sb_index, ticks); +} + +static void storm_memset_hc_disable(struct bnx2x *bp, u8 port, + u16 fw_sb_id, u8 sb_index, + u8 disable) +{ + u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT); + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index); + u8 flags = REG_RD8(bp, addr); + /* clear and set */ + flags &= ~HC_INDEX_DATA_HC_ENABLED; + flags |= enable_flag; + REG_WR8(bp, addr, flags); + DP(NETIF_MSG_IFUP, + "port %x fw_sb_id %d sb_index %d disable %d\n", + port, fw_sb_id, sb_index, disable); +} + +void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id, + u8 sb_index, u8 disable, u16 usec) +{ + int port = BP_PORT(bp); + u8 ticks = usec / BNX2X_BTR; + + storm_memset_hc_timeout(bp, port, fw_sb_id, sb_index, ticks); + + disable = disable ? 1 : (usec ? 0 : 1); + storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable); +} + +void bnx2x_schedule_sp_rtnl(struct bnx2x *bp, enum sp_rtnl_flag flag, + u32 verbose) +{ + smp_mb__before_atomic(); + set_bit(flag, &bp->sp_rtnl_state); + smp_mb__after_atomic(); + DP((BNX2X_MSG_SP | verbose), "Scheduling sp_rtnl task [Flag: %d]\n", + flag); + schedule_delayed_work(&bp->sp_rtnl_task, 0); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h new file mode 100644 index 000000000..df5e8c2e8 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -0,0 +1,1409 @@ +/* bnx2x_cmn.h: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ +#ifndef BNX2X_CMN_H +#define BNX2X_CMN_H + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/irq.h> + +#include "bnx2x.h" +#include "bnx2x_sriov.h" + +/* This is used as a replacement for an MCP if it's not present */ +extern int bnx2x_load_count[2][3]; /* per-path: 0-common, 1-port0, 2-port1 */ +extern int bnx2x_num_queues; + +/************************ Macros ********************************/ +#define BNX2X_PCI_FREE(x, y, size) \ + do { \ + if (x) { \ + dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \ + x = NULL; \ + y = 0; \ + } \ + } while (0) + +#define BNX2X_FREE(x) \ + do { \ + if (x) { \ + kfree((void *)x); \ + x = NULL; \ + } \ + } while (0) + +#define BNX2X_PCI_ALLOC(y, size) \ +({ \ + void *x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ + if (x) \ + DP(NETIF_MSG_HW, \ + "BNX2X_PCI_ALLOC: Physical %Lx Virtual %p\n", \ + (unsigned long long)(*y), x); \ + x; \ +}) +#define BNX2X_PCI_FALLOC(y, size) \ +({ \ + void *x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ + if (x) { \ + memset(x, 0xff, size); \ + DP(NETIF_MSG_HW, \ + "BNX2X_PCI_FALLOC: Physical %Lx Virtual %p\n", \ + (unsigned long long)(*y), x); \ + } \ + x; \ +}) + +/*********************** Interfaces **************************** + * Functions that need to be implemented by each driver version + */ +/* Init */ + +/** + * bnx2x_send_unload_req - request unload mode from the MCP. + * + * @bp: driver handle + * @unload_mode: requested function's unload mode + * + * Return unload mode returned by the MCP: COMMON, PORT or FUNC. + */ +u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode); + +/** + * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. + * + * @bp: driver handle + * @keep_link: true iff link should be kept up + */ +void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link); + +/** + * bnx2x_config_rss_pf - configure RSS parameters in a PF. + * + * @bp: driver handle + * @rss_obj: RSS object to use + * @ind_table: indirection table to configure + * @config_hash: re-configure RSS hash keys configuration + * @enable: enabled or disabled configuration + */ +int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj, + bool config_hash, bool enable); + +/** + * bnx2x__init_func_obj - init function object + * + * @bp: driver handle + * + * Initializes the Function Object with the appropriate + * parameters which include a function slow path driver + * interface. + */ +void bnx2x__init_func_obj(struct bnx2x *bp); + +/** + * bnx2x_setup_queue - setup eth queue. + * + * @bp: driver handle + * @fp: pointer to the fastpath structure + * @leading: boolean + * + */ +int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, + bool leading); + +/** + * bnx2x_setup_leading - bring up a leading eth queue. + * + * @bp: driver handle + */ +int bnx2x_setup_leading(struct bnx2x *bp); + +/** + * bnx2x_fw_command - send the MCP a request + * + * @bp: driver handle + * @command: request + * @param: request's parameter + * + * block until there is a reply + */ +u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param); + +/** + * bnx2x_initial_phy_init - initialize link parameters structure variables. + * + * @bp: driver handle + * @load_mode: current mode + */ +int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode); + +/** + * bnx2x_link_set - configure hw according to link parameters structure. + * + * @bp: driver handle + */ +void bnx2x_link_set(struct bnx2x *bp); + +/** + * bnx2x_force_link_reset - Forces link reset, and put the PHY + * in reset as well. + * + * @bp: driver handle + */ +void bnx2x_force_link_reset(struct bnx2x *bp); + +/** + * bnx2x_link_test - query link status. + * + * @bp: driver handle + * @is_serdes: bool + * + * Returns 0 if link is UP. + */ +u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes); + +/** + * bnx2x_drv_pulse - write driver pulse to shmem + * + * @bp: driver handle + * + * writes the value in bp->fw_drv_pulse_wr_seq to drv_pulse mbox + * in the shmem. + */ +void bnx2x_drv_pulse(struct bnx2x *bp); + +/** + * bnx2x_igu_ack_sb - update IGU with current SB value + * + * @bp: driver handle + * @igu_sb_id: SB id + * @segment: SB segment + * @index: SB index + * @op: SB operation + * @update: is HW update required + */ +void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, + u16 index, u8 op, u8 update); + +/* Disable transactions from chip to host */ +void bnx2x_pf_disable(struct bnx2x *bp); +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val); + +/** + * bnx2x__link_status_update - handles link status change. + * + * @bp: driver handle + */ +void bnx2x__link_status_update(struct bnx2x *bp); + +/** + * bnx2x_link_report - report link status to upper layer. + * + * @bp: driver handle + */ +void bnx2x_link_report(struct bnx2x *bp); + +/* None-atomic version of bnx2x_link_report() */ +void __bnx2x_link_report(struct bnx2x *bp); + +/** + * bnx2x_get_mf_speed - calculate MF speed. + * + * @bp: driver handle + * + * Takes into account current linespeed and MF configuration. + */ +u16 bnx2x_get_mf_speed(struct bnx2x *bp); + +/** + * bnx2x_msix_sp_int - MSI-X slowpath interrupt handler + * + * @irq: irq number + * @dev_instance: private instance + */ +irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance); + +/** + * bnx2x_interrupt - non MSI-X interrupt handler + * + * @irq: irq number + * @dev_instance: private instance + */ +irqreturn_t bnx2x_interrupt(int irq, void *dev_instance); + +/** + * bnx2x_cnic_notify - send command to cnic driver + * + * @bp: driver handle + * @cmd: command + */ +int bnx2x_cnic_notify(struct bnx2x *bp, int cmd); + +/** + * bnx2x_setup_cnic_irq_info - provides cnic with IRQ information + * + * @bp: driver handle + */ +void bnx2x_setup_cnic_irq_info(struct bnx2x *bp); + +/** + * bnx2x_setup_cnic_info - provides cnic with updated info + * + * @bp: driver handle + */ +void bnx2x_setup_cnic_info(struct bnx2x *bp); + +/** + * bnx2x_int_enable - enable HW interrupts. + * + * @bp: driver handle + */ +void bnx2x_int_enable(struct bnx2x *bp); + +/** + * bnx2x_int_disable_sync - disable interrupts. + * + * @bp: driver handle + * @disable_hw: true, disable HW interrupts. + * + * This function ensures that there are no + * ISRs or SP DPCs (sp_task) are running after it returns. + */ +void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw); + +/** + * bnx2x_nic_init_cnic - init driver internals for cnic. + * + * @bp: driver handle + * @load_code: COMMON, PORT or FUNCTION + * + * Initializes: + * - rings + * - status blocks + * - etc. + */ +void bnx2x_nic_init_cnic(struct bnx2x *bp); + +/** + * bnx2x_preirq_nic_init - init driver internals. + * + * @bp: driver handle + * + * Initializes: + * - fastpath object + * - fastpath rings + * etc. + */ +void bnx2x_pre_irq_nic_init(struct bnx2x *bp); + +/** + * bnx2x_postirq_nic_init - init driver internals. + * + * @bp: driver handle + * @load_code: COMMON, PORT or FUNCTION + * + * Initializes: + * - status blocks + * - slowpath rings + * - etc. + */ +void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code); +/** + * bnx2x_alloc_mem_cnic - allocate driver's memory for cnic. + * + * @bp: driver handle + */ +int bnx2x_alloc_mem_cnic(struct bnx2x *bp); +/** + * bnx2x_alloc_mem - allocate driver's memory. + * + * @bp: driver handle + */ +int bnx2x_alloc_mem(struct bnx2x *bp); + +/** + * bnx2x_free_mem_cnic - release driver's memory for cnic. + * + * @bp: driver handle + */ +void bnx2x_free_mem_cnic(struct bnx2x *bp); +/** + * bnx2x_free_mem - release driver's memory. + * + * @bp: driver handle + */ +void bnx2x_free_mem(struct bnx2x *bp); + +/** + * bnx2x_set_num_queues - set number of queues according to mode. + * + * @bp: driver handle + */ +void bnx2x_set_num_queues(struct bnx2x *bp); + +/** + * bnx2x_chip_cleanup - cleanup chip internals. + * + * @bp: driver handle + * @unload_mode: COMMON, PORT, FUNCTION + * @keep_link: true iff link should be kept up. + * + * - Cleanup MAC configuration. + * - Closes clients. + * - etc. + */ +void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link); + +/** + * bnx2x_acquire_hw_lock - acquire HW lock. + * + * @bp: driver handle + * @resource: resource bit which was locked + */ +int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource); + +/** + * bnx2x_release_hw_lock - release HW lock. + * + * @bp: driver handle + * @resource: resource bit which was locked + */ +int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource); + +/** + * bnx2x_release_leader_lock - release recovery leader lock + * + * @bp: driver handle + */ +int bnx2x_release_leader_lock(struct bnx2x *bp); + +/** + * bnx2x_set_eth_mac - configure eth MAC address in the HW + * + * @bp: driver handle + * @set: set or clear + * + * Configures according to the value in netdev->dev_addr. + */ +int bnx2x_set_eth_mac(struct bnx2x *bp, bool set); + +/** + * bnx2x_set_rx_mode - set MAC filtering configurations. + * + * @dev: netdevice + * + * called with netif_tx_lock from dev_mcast.c + * If bp->state is OPEN, should be called with + * netif_addr_lock_bh() + */ +void bnx2x_set_rx_mode_inner(struct bnx2x *bp); + +/* Parity errors related */ +void bnx2x_set_pf_load(struct bnx2x *bp); +bool bnx2x_clear_pf_load(struct bnx2x *bp); +bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print); +bool bnx2x_reset_is_done(struct bnx2x *bp, int engine); +void bnx2x_set_reset_in_progress(struct bnx2x *bp); +void bnx2x_set_reset_global(struct bnx2x *bp); +void bnx2x_disable_close_the_gate(struct bnx2x *bp); +int bnx2x_init_hw_func_cnic(struct bnx2x *bp); + +void bnx2x_clear_vlan_info(struct bnx2x *bp); + +/** + * bnx2x_sp_event - handle ramrods completion. + * + * @fp: fastpath handle for the event + * @rr_cqe: eth_rx_cqe + */ +void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe); + +/** + * bnx2x_ilt_set_info - prepare ILT configurations. + * + * @bp: driver handle + */ +void bnx2x_ilt_set_info(struct bnx2x *bp); + +/** + * bnx2x_ilt_set_cnic_info - prepare ILT configurations for SRC + * and TM. + * + * @bp: driver handle + */ +void bnx2x_ilt_set_info_cnic(struct bnx2x *bp); + +/** + * bnx2x_dcbx_init - initialize dcbx protocol. + * + * @bp: driver handle + */ +void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem); + +/** + * bnx2x_set_power_state - set power state to the requested value. + * + * @bp: driver handle + * @state: required state D0 or D3hot + * + * Currently only D0 and D3hot are supported. + */ +int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state); + +/** + * bnx2x_update_max_mf_config - update MAX part of MF configuration in HW. + * + * @bp: driver handle + * @value: new value + */ +void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value); +/* Error handling */ +void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl); + +/* dev_close main block */ +int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link); + +/* dev_open main block */ +int bnx2x_nic_load(struct bnx2x *bp, int load_mode); + +/* hard_xmit callback */ +netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev); + +/* setup_tc callback */ +int bnx2x_setup_tc(struct net_device *dev, u8 num_tc); +int __bnx2x_setup_tc(struct net_device *dev, enum tc_setup_type type, + void *type_data); + +int bnx2x_get_vf_config(struct net_device *dev, int vf, + struct ifla_vf_info *ivi); +int bnx2x_set_vf_mac(struct net_device *dev, int queue, u8 *mac); +int bnx2x_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos, + __be16 vlan_proto); + +/* select_queue callback */ +u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, + struct net_device *sb_dev, + select_queue_fallback_t fallback); + +static inline void bnx2x_update_rx_prod(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + u16 bd_prod, u16 rx_comp_prod, + u16 rx_sge_prod) +{ + struct ustorm_eth_rx_producers rx_prods = {0}; + u32 i; + + /* Update producers */ + rx_prods.bd_prod = bd_prod; + rx_prods.cqe_prod = rx_comp_prod; + rx_prods.sge_prod = rx_sge_prod; + + /* Make sure that the BD and SGE data is updated before updating the + * producers since FW might read the BD/SGE right after the producer + * is updated. + * This is only applicable for weak-ordered memory model archs such + * as IA-64. The following barrier is also mandatory since FW will + * assumes BDs must have buffers. + */ + wmb(); + + for (i = 0; i < sizeof(rx_prods)/4; i++) + REG_WR_RELAXED(bp, fp->ustorm_rx_prods_offset + i * 4, + ((u32 *)&rx_prods)[i]); + + mmiowb(); /* keep prod updates ordered */ + + DP(NETIF_MSG_RX_STATUS, + "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n", + fp->index, bd_prod, rx_comp_prod, rx_sge_prod); +} + +/* reload helper */ +int bnx2x_reload_if_running(struct net_device *dev); + +int bnx2x_change_mac_addr(struct net_device *dev, void *p); + +/* NAPI poll Tx part */ +int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata); + +/* suspend/resume callbacks */ +int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state); +int bnx2x_resume(struct pci_dev *pdev); + +/* Release IRQ vectors */ +void bnx2x_free_irq(struct bnx2x *bp); + +void bnx2x_free_fp_mem(struct bnx2x *bp); +void bnx2x_init_rx_rings(struct bnx2x *bp); +void bnx2x_init_rx_rings_cnic(struct bnx2x *bp); +void bnx2x_free_skbs(struct bnx2x *bp); +void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw); +void bnx2x_netif_start(struct bnx2x *bp); +int bnx2x_load_cnic(struct bnx2x *bp); + +/** + * bnx2x_enable_msix - set msix configuration. + * + * @bp: driver handle + * + * fills msix_table, requests vectors, updates num_queues + * according to number of available vectors. + */ +int bnx2x_enable_msix(struct bnx2x *bp); + +/** + * bnx2x_enable_msi - request msi mode from OS, updated internals accordingly + * + * @bp: driver handle + */ +int bnx2x_enable_msi(struct bnx2x *bp); + +/** + * bnx2x_alloc_mem_bp - allocate memories outsize main driver structure + * + * @bp: driver handle + */ +int bnx2x_alloc_mem_bp(struct bnx2x *bp); + +/** + * bnx2x_free_mem_bp - release memories outsize main driver structure + * + * @bp: driver handle + */ +void bnx2x_free_mem_bp(struct bnx2x *bp); + +/** + * bnx2x_change_mtu - change mtu netdev callback + * + * @dev: net device + * @new_mtu: requested mtu + * + */ +int bnx2x_change_mtu(struct net_device *dev, int new_mtu); + +#ifdef NETDEV_FCOE_WWNN +/** + * bnx2x_fcoe_get_wwn - return the requested WWN value for this port + * + * @dev: net_device + * @wwn: output buffer + * @type: WWN type: NETDEV_FCOE_WWNN (node) or NETDEV_FCOE_WWPN (port) + * + */ +int bnx2x_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type); +#endif + +netdev_features_t bnx2x_fix_features(struct net_device *dev, + netdev_features_t features); +int bnx2x_set_features(struct net_device *dev, netdev_features_t features); + +/** + * bnx2x_tx_timeout - tx timeout netdev callback + * + * @dev: net device + */ +void bnx2x_tx_timeout(struct net_device *dev); + +/** bnx2x_get_c2s_mapping - read inner-to-outer vlan configuration + * c2s_map should have BNX2X_MAX_PRIORITY entries. + * @bp: driver handle + * @c2s_map: should have BNX2X_MAX_PRIORITY entries for mapping + * @c2s_default: entry for non-tagged configuration + */ +void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default); + +/*********************** Inlines **********************************/ +/*********************** Fast path ********************************/ +static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp) +{ + barrier(); /* status block is written to by the chip */ + fp->fp_hc_idx = fp->sb_running_index[SM_RX_ID]; +} + +static inline void bnx2x_igu_ack_sb_gen(struct bnx2x *bp, u8 igu_sb_id, + u8 segment, u16 index, u8 op, + u8 update, u32 igu_addr) +{ + struct igu_regular cmd_data = {0}; + + cmd_data.sb_id_and_flags = + ((index << IGU_REGULAR_SB_INDEX_SHIFT) | + (segment << IGU_REGULAR_SEGMENT_ACCESS_SHIFT) | + (update << IGU_REGULAR_BUPDATE_SHIFT) | + (op << IGU_REGULAR_ENABLE_INT_SHIFT)); + + DP(NETIF_MSG_INTR, "write 0x%08x to IGU addr 0x%x\n", + cmd_data.sb_id_and_flags, igu_addr); + REG_WR(bp, igu_addr, cmd_data.sb_id_and_flags); + + /* Make sure that ACK is written */ + mmiowb(); + barrier(); +} + +static inline void bnx2x_hc_ack_sb(struct bnx2x *bp, u8 sb_id, + u8 storm, u16 index, u8 op, u8 update) +{ + u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 + + COMMAND_REG_INT_ACK); + struct igu_ack_register igu_ack; + + igu_ack.status_block_index = index; + igu_ack.sb_id_and_flags = + ((sb_id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) | + (storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) | + (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) | + (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT)); + + REG_WR(bp, hc_addr, (*(u32 *)&igu_ack)); + + /* Make sure that ACK is written */ + mmiowb(); + barrier(); +} + +static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 storm, + u16 index, u8 op, u8 update) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_ack_sb(bp, igu_sb_id, storm, index, op, update); + else { + u8 segment; + + if (CHIP_INT_MODE_IS_BC(bp)) + segment = storm; + else if (igu_sb_id != bp->igu_dsb_id) + segment = IGU_SEG_ACCESS_DEF; + else if (storm == ATTENTION_ID) + segment = IGU_SEG_ACCESS_ATTN; + else + segment = IGU_SEG_ACCESS_DEF; + bnx2x_igu_ack_sb(bp, igu_sb_id, segment, index, op, update); + } +} + +static inline u16 bnx2x_hc_ack_int(struct bnx2x *bp) +{ + u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 + + COMMAND_REG_SIMD_MASK); + u32 result = REG_RD(bp, hc_addr); + + barrier(); + return result; +} + +static inline u16 bnx2x_igu_ack_int(struct bnx2x *bp) +{ + u32 igu_addr = (BAR_IGU_INTMEM + IGU_REG_SISR_MDPC_WMASK_LSB_UPPER*8); + u32 result = REG_RD(bp, igu_addr); + + DP(NETIF_MSG_INTR, "read 0x%08x from IGU addr 0x%x\n", + result, igu_addr); + + barrier(); + return result; +} + +static inline u16 bnx2x_ack_int(struct bnx2x *bp) +{ + barrier(); + if (bp->common.int_block == INT_BLOCK_HC) + return bnx2x_hc_ack_int(bp); + else + return bnx2x_igu_ack_int(bp); +} + +static inline int bnx2x_has_tx_work_unload(struct bnx2x_fp_txdata *txdata) +{ + /* Tell compiler that consumer and producer can change */ + barrier(); + return txdata->tx_pkt_prod != txdata->tx_pkt_cons; +} + +static inline u16 bnx2x_tx_avail(struct bnx2x *bp, + struct bnx2x_fp_txdata *txdata) +{ + s16 used; + u16 prod; + u16 cons; + + prod = txdata->tx_bd_prod; + cons = txdata->tx_bd_cons; + + used = SUB_S16(prod, cons); + +#ifdef BNX2X_STOP_ON_ERROR + WARN_ON(used < 0); + WARN_ON(used > txdata->tx_ring_size); + WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL); +#endif + + return (s16)(txdata->tx_ring_size) - used; +} + +static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata) +{ + u16 hw_cons; + + /* Tell compiler that status block fields can change */ + barrier(); + hw_cons = le16_to_cpu(*txdata->tx_cons_sb); + return hw_cons != txdata->tx_pkt_cons; +} + +static inline bool bnx2x_has_tx_work(struct bnx2x_fastpath *fp) +{ + u8 cos; + for_each_cos_in_tx_queue(fp, cos) + if (bnx2x_tx_queue_has_work(fp->txdata_ptr[cos])) + return true; + return false; +} + +#define BNX2X_IS_CQE_COMPLETED(cqe_fp) (cqe_fp->marker == 0x0) +#define BNX2X_SEED_CQE(cqe_fp) (cqe_fp->marker = 0xFFFFFFFF) +static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) +{ + u16 cons; + union eth_rx_cqe *cqe; + struct eth_fast_path_rx_cqe *cqe_fp; + + cons = RCQ_BD(fp->rx_comp_cons); + cqe = &fp->rx_comp_ring[cons]; + cqe_fp = &cqe->fast_path_cqe; + return BNX2X_IS_CQE_COMPLETED(cqe_fp); +} + +/** + * bnx2x_tx_disable - disables tx from stack point of view + * + * @bp: driver handle + */ +static inline void bnx2x_tx_disable(struct bnx2x *bp) +{ + netif_tx_disable(bp->dev); + netif_carrier_off(bp->dev); +} + +static inline void bnx2x_free_rx_sge(struct bnx2x *bp, + struct bnx2x_fastpath *fp, u16 index) +{ + struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; + struct page *page = sw_buf->page; + struct eth_rx_sge *sge = &fp->rx_sge_ring[index]; + + /* Skip "next page" elements */ + if (!page) + return; + + /* Since many fragments can share the same page, make sure to + * only unmap and free the page once. + */ + dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(sw_buf, mapping), + SGE_PAGE_SIZE, DMA_FROM_DEVICE); + + put_page(page); + + sw_buf->page = NULL; + sge->addr_hi = 0; + sge->addr_lo = 0; +} + +static inline void bnx2x_del_all_napi_cnic(struct bnx2x *bp) +{ + int i; + + for_each_rx_queue_cnic(bp, i) { + napi_hash_del(&bnx2x_fp(bp, i, napi)); + netif_napi_del(&bnx2x_fp(bp, i, napi)); + } +} + +static inline void bnx2x_del_all_napi(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) { + napi_hash_del(&bnx2x_fp(bp, i, napi)); + netif_napi_del(&bnx2x_fp(bp, i, napi)); + } +} + +int bnx2x_set_int_mode(struct bnx2x *bp); + +static inline void bnx2x_disable_msi(struct bnx2x *bp) +{ + if (bp->flags & USING_MSIX_FLAG) { + pci_disable_msix(bp->pdev); + bp->flags &= ~(USING_MSIX_FLAG | USING_SINGLE_MSIX_FLAG); + } else if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } +} + +static inline void bnx2x_clear_sge_mask_next_elems(struct bnx2x_fastpath *fp) +{ + int i, j; + + for (i = 1; i <= NUM_RX_SGE_PAGES; i++) { + int idx = RX_SGE_CNT * i - 1; + + for (j = 0; j < 2; j++) { + BIT_VEC64_CLEAR_BIT(fp->sge_mask, idx); + idx--; + } + } +} + +static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp) +{ + /* Set the mask to all 1-s: it's faster to compare to 0 than to 0xf-s */ + memset(fp->sge_mask, 0xff, sizeof(fp->sge_mask)); + + /* Clear the two last indices in the page to 1: + these are the indices that correspond to the "next" element, + hence will never be indicated and should be removed from + the calculations. */ + bnx2x_clear_sge_mask_next_elems(fp); +} + +/* note that we are not allocating a new buffer, + * we are just moving one from cons to prod + * we are not creating a new mapping, + * so there is no need to check for dma_mapping_error(). + */ +static inline void bnx2x_reuse_rx_data(struct bnx2x_fastpath *fp, + u16 cons, u16 prod) +{ + struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons]; + struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod]; + struct eth_rx_bd *cons_bd = &fp->rx_desc_ring[cons]; + struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod]; + + dma_unmap_addr_set(prod_rx_buf, mapping, + dma_unmap_addr(cons_rx_buf, mapping)); + prod_rx_buf->data = cons_rx_buf->data; + *prod_bd = *cons_bd; +} + +/************************* Init ******************************************/ + +/* returns func by VN for current port */ +static inline int func_by_vn(struct bnx2x *bp, int vn) +{ + return 2 * vn + BP_PORT(bp); +} + +static inline int bnx2x_config_rss_eth(struct bnx2x *bp, bool config_hash) +{ + return bnx2x_rss(bp, &bp->rss_conf_obj, config_hash, true); +} + +/** + * bnx2x_func_start - init function + * + * @bp: driver handle + * + * Must be called before sending CLIENT_SETUP for the first client. + */ +static inline int bnx2x_func_start(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_start_params *start_params = + &func_params.params.start; + u16 port; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_START; + + /* Function parameters */ + start_params->mf_mode = bp->mf_mode; + start_params->sd_vlan_tag = bp->mf_ov; + + /* Configure Ethertype for BD mode */ + if (IS_MF_BD(bp)) { + DP(NETIF_MSG_IFUP, "Configuring ethertype 0x88a8 for BD\n"); + start_params->sd_vlan_eth_type = ETH_P_8021AD; + REG_WR(bp, PRS_REG_VLAN_TYPE_0, ETH_P_8021AD); + REG_WR(bp, PBF_REG_VLAN_TYPE_0, ETH_P_8021AD); + REG_WR(bp, NIG_REG_LLH_E1HOV_TYPE_1, ETH_P_8021AD); + + bnx2x_get_c2s_mapping(bp, start_params->c2s_pri, + &start_params->c2s_pri_default); + start_params->c2s_pri_valid = 1; + + DP(NETIF_MSG_IFUP, + "Inner-to-Outer priority: %02x %02x %02x %02x %02x %02x %02x %02x [Default %02x]\n", + start_params->c2s_pri[0], start_params->c2s_pri[1], + start_params->c2s_pri[2], start_params->c2s_pri[3], + start_params->c2s_pri[4], start_params->c2s_pri[5], + start_params->c2s_pri[6], start_params->c2s_pri[7], + start_params->c2s_pri_default); + } + + if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp)) + start_params->network_cos_mode = STATIC_COS; + else /* CHIP_IS_E1X */ + start_params->network_cos_mode = FW_WRR; + if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count) { + port = bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].dst_port; + start_params->vxlan_dst_port = port; + } + if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) { + port = bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].dst_port; + start_params->geneve_dst_port = port; + } + + start_params->inner_rss = 1; + + if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) { + start_params->class_fail_ethtype = ETH_P_FIP; + start_params->class_fail = 1; + start_params->no_added_tags = 1; + } + + return bnx2x_func_state_change(bp, &func_params); +} + +/** + * bnx2x_set_fw_mac_addr - fill in a MAC address in FW format + * + * @fw_hi: pointer to upper part + * @fw_mid: pointer to middle part + * @fw_lo: pointer to lower part + * @mac: pointer to MAC address + */ +static inline void bnx2x_set_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid, + __le16 *fw_lo, u8 *mac) +{ + ((u8 *)fw_hi)[0] = mac[1]; + ((u8 *)fw_hi)[1] = mac[0]; + ((u8 *)fw_mid)[0] = mac[3]; + ((u8 *)fw_mid)[1] = mac[2]; + ((u8 *)fw_lo)[0] = mac[5]; + ((u8 *)fw_lo)[1] = mac[4]; +} + +static inline void bnx2x_free_rx_mem_pool(struct bnx2x *bp, + struct bnx2x_alloc_pool *pool) +{ + if (!pool->page) + return; + + put_page(pool->page); + + pool->page = NULL; +} + +static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp, + struct bnx2x_fastpath *fp, int last) +{ + int i; + + if (fp->mode == TPA_MODE_DISABLED) + return; + + for (i = 0; i < last; i++) + bnx2x_free_rx_sge(bp, fp, i); + + bnx2x_free_rx_mem_pool(bp, &fp->page_pool); +} + +static inline void bnx2x_set_next_page_rx_bd(struct bnx2x_fastpath *fp) +{ + int i; + + for (i = 1; i <= NUM_RX_RINGS; i++) { + struct eth_rx_bd *rx_bd; + + rx_bd = &fp->rx_desc_ring[RX_DESC_CNT * i - 2]; + rx_bd->addr_hi = + cpu_to_le32(U64_HI(fp->rx_desc_mapping + + BCM_PAGE_SIZE*(i % NUM_RX_RINGS))); + rx_bd->addr_lo = + cpu_to_le32(U64_LO(fp->rx_desc_mapping + + BCM_PAGE_SIZE*(i % NUM_RX_RINGS))); + } +} + +/* Statistics ID are global per chip/path, while Client IDs for E1x are per + * port. + */ +static inline u8 bnx2x_stats_id(struct bnx2x_fastpath *fp) +{ + struct bnx2x *bp = fp->bp; + if (!CHIP_IS_E1x(bp)) { + /* there are special statistics counters for FCoE 136..140 */ + if (IS_FCOE_FP(fp)) + return bp->cnic_base_cl_id + (bp->pf_num >> 1); + return fp->cl_id; + } + return fp->cl_id + BP_PORT(bp) * FP_SB_MAX_E1x; +} + +static inline void bnx2x_init_vlan_mac_fp_objs(struct bnx2x_fastpath *fp, + bnx2x_obj_type obj_type) +{ + struct bnx2x *bp = fp->bp; + + /* Configure classification DBs */ + bnx2x_init_mac_obj(bp, &bnx2x_sp_obj(bp, fp).mac_obj, fp->cl_id, + fp->cid, BP_FUNC(bp), bnx2x_sp(bp, mac_rdata), + bnx2x_sp_mapping(bp, mac_rdata), + BNX2X_FILTER_MAC_PENDING, + &bp->sp_state, obj_type, + &bp->macs_pool); + + if (!CHIP_IS_E1x(bp)) + bnx2x_init_vlan_obj(bp, &bnx2x_sp_obj(bp, fp).vlan_obj, + fp->cl_id, fp->cid, BP_FUNC(bp), + bnx2x_sp(bp, vlan_rdata), + bnx2x_sp_mapping(bp, vlan_rdata), + BNX2X_FILTER_VLAN_PENDING, + &bp->sp_state, obj_type, + &bp->vlans_pool); +} + +/** + * bnx2x_get_path_func_num - get number of active functions + * + * @bp: driver handle + * + * Calculates the number of active (not hidden) functions on the + * current path. + */ +static inline u8 bnx2x_get_path_func_num(struct bnx2x *bp) +{ + u8 func_num = 0, i; + + /* 57710 has only one function per-port */ + if (CHIP_IS_E1(bp)) + return 1; + + /* Calculate a number of functions enabled on the current + * PATH/PORT. + */ + if (CHIP_REV_IS_SLOW(bp)) { + if (IS_MF(bp)) + func_num = 4; + else + func_num = 2; + } else { + for (i = 0; i < E1H_FUNC_MAX / 2; i++) { + u32 func_config = + MF_CFG_RD(bp, + func_mf_config[BP_PATH(bp) + 2 * i]. + config); + func_num += + ((func_config & FUNC_MF_CFG_FUNC_HIDE) ? 0 : 1); + } + } + + WARN_ON(!func_num); + + return func_num; +} + +static inline void bnx2x_init_bp_objs(struct bnx2x *bp) +{ + /* RX_MODE controlling object */ + bnx2x_init_rx_mode_obj(bp, &bp->rx_mode_obj); + + /* multicast configuration controlling object */ + bnx2x_init_mcast_obj(bp, &bp->mcast_obj, bp->fp->cl_id, bp->fp->cid, + BP_FUNC(bp), BP_FUNC(bp), + bnx2x_sp(bp, mcast_rdata), + bnx2x_sp_mapping(bp, mcast_rdata), + BNX2X_FILTER_MCAST_PENDING, &bp->sp_state, + BNX2X_OBJ_TYPE_RX); + + /* Setup CAM credit pools */ + bnx2x_init_mac_credit_pool(bp, &bp->macs_pool, BP_FUNC(bp), + bnx2x_get_path_func_num(bp)); + + bnx2x_init_vlan_credit_pool(bp, &bp->vlans_pool, BP_FUNC(bp), + bnx2x_get_path_func_num(bp)); + + /* RSS configuration object */ + bnx2x_init_rss_config_obj(bp, &bp->rss_conf_obj, bp->fp->cl_id, + bp->fp->cid, BP_FUNC(bp), BP_FUNC(bp), + bnx2x_sp(bp, rss_rdata), + bnx2x_sp_mapping(bp, rss_rdata), + BNX2X_FILTER_RSS_CONF_PENDING, &bp->sp_state, + BNX2X_OBJ_TYPE_RX); + + bp->vlan_credit = PF_VLAN_CREDIT_E2(bp, bnx2x_get_path_func_num(bp)); +} + +static inline u8 bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp) +{ + if (CHIP_IS_E1x(fp->bp)) + return fp->cl_id + BP_PORT(fp->bp) * ETH_MAX_RX_CLIENTS_E1H; + else + return fp->cl_id; +} + +static inline void bnx2x_init_txdata(struct bnx2x *bp, + struct bnx2x_fp_txdata *txdata, u32 cid, + int txq_index, __le16 *tx_cons_sb, + struct bnx2x_fastpath *fp) +{ + txdata->cid = cid; + txdata->txq_index = txq_index; + txdata->tx_cons_sb = tx_cons_sb; + txdata->parent_fp = fp; + txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size; + + DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n", + txdata->cid, txdata->txq_index); +} + +static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx) +{ + return bp->cnic_base_cl_id + cl_idx + + (bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX; +} + +static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp) +{ + /* the 'first' id is allocated for the cnic */ + return bp->base_fw_ndsb; +} + +static inline u8 bnx2x_cnic_igu_sb_id(struct bnx2x *bp) +{ + return bp->igu_base_sb; +} + +static inline int bnx2x_clean_tx_queue(struct bnx2x *bp, + struct bnx2x_fp_txdata *txdata) +{ + int cnt = 1000; + + while (bnx2x_has_tx_work_unload(txdata)) { + if (!cnt) { + BNX2X_ERR("timeout waiting for queue[%d]: txdata->tx_pkt_prod(%d) != txdata->tx_pkt_cons(%d)\n", + txdata->txq_index, txdata->tx_pkt_prod, + txdata->tx_pkt_cons); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); + return -EBUSY; +#else + break; +#endif + } + cnt--; + usleep_range(1000, 2000); + } + + return 0; +} + +int bnx2x_get_link_cfg_idx(struct bnx2x *bp); + +static inline void __storm_memset_struct(struct bnx2x *bp, + u32 addr, size_t size, u32 *data) +{ + int i; + for (i = 0; i < size/4; i++) + REG_WR(bp, addr + (i * 4), data[i]); +} + +/** + * bnx2x_wait_sp_comp - wait for the outstanding SP commands. + * + * @bp: driver handle + * @mask: bits that need to be cleared + */ +static inline bool bnx2x_wait_sp_comp(struct bnx2x *bp, unsigned long mask) +{ + int tout = 5000; /* Wait for 5 secs tops */ + + while (tout--) { + smp_mb(); + netif_addr_lock_bh(bp->dev); + if (!(bp->sp_state & mask)) { + netif_addr_unlock_bh(bp->dev); + return true; + } + netif_addr_unlock_bh(bp->dev); + + usleep_range(1000, 2000); + } + + smp_mb(); + + netif_addr_lock_bh(bp->dev); + if (bp->sp_state & mask) { + BNX2X_ERR("Filtering completion timed out. sp_state 0x%lx, mask 0x%lx\n", + bp->sp_state, mask); + netif_addr_unlock_bh(bp->dev); + return false; + } + netif_addr_unlock_bh(bp->dev); + + return true; +} + +/** + * bnx2x_set_ctx_validation - set CDU context validation values + * + * @bp: driver handle + * @cxt: context of the connection on the host memory + * @cid: SW CID of the connection to be configured + */ +void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt, + u32 cid); + +void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id, + u8 sb_index, u8 disable, u16 usec); +void bnx2x_acquire_phy_lock(struct bnx2x *bp); +void bnx2x_release_phy_lock(struct bnx2x *bp); + +/** + * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration. + * + * @bp: driver handle + * @mf_cfg: MF configuration + * + */ +static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg) +{ + u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >> + FUNC_MF_CFG_MAX_BW_SHIFT; + if (!max_cfg) { + DP(NETIF_MSG_IFUP | BNX2X_MSG_ETHTOOL, + "Max BW configured to 0 - using 100 instead\n"); + max_cfg = 100; + } + return max_cfg; +} + +/* checks if HW supports GRO for given MTU */ +static inline bool bnx2x_mtu_allows_gro(int mtu) +{ + /* gro frags per page */ + int fpp = SGE_PAGE_SIZE / (mtu - ETH_MAX_TPA_HEADER_SIZE); + + /* + * 1. Number of frags should not grow above MAX_SKB_FRAGS + * 2. Frag must fit the page + */ + return mtu <= SGE_PAGE_SIZE && (U_ETH_SGL_SIZE * fpp) <= MAX_SKB_FRAGS; +} + +/** + * bnx2x_get_iscsi_info - update iSCSI params according to licensing info. + * + * @bp: driver handle + * + */ +void bnx2x_get_iscsi_info(struct bnx2x *bp); + +/** + * bnx2x_link_sync_notify - send notification to other functions. + * + * @bp: driver handle + * + */ +static inline void bnx2x_link_sync_notify(struct bnx2x *bp) +{ + int func; + int vn; + + /* Set the attention towards other drivers on the same port */ + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + if (vn == BP_VN(bp)) + continue; + + func = func_by_vn(bp, vn); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 + + (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1); + } +} + +/** + * bnx2x_update_drv_flags - update flags in shmem + * + * @bp: driver handle + * @flags: flags to update + * @set: set or clear + * + */ +static inline void bnx2x_update_drv_flags(struct bnx2x *bp, u32 flags, u32 set) +{ + if (SHMEM2_HAS(bp, drv_flags)) { + u32 drv_flags; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_DRV_FLAGS); + drv_flags = SHMEM2_RD(bp, drv_flags); + + if (set) + SET_FLAGS(drv_flags, flags); + else + RESET_FLAGS(drv_flags, flags); + + SHMEM2_WR(bp, drv_flags, drv_flags); + DP(NETIF_MSG_IFUP, "drv_flags 0x%08x\n", drv_flags); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_DRV_FLAGS); + } +} + + + +/** + * bnx2x_fill_fw_str - Fill buffer with FW version string + * + * @bp: driver handle + * @buf: character buffer to fill with the fw name + * @buf_len: length of the above buffer + * + */ +void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len); + +int bnx2x_drain_tx_queues(struct bnx2x *bp); +void bnx2x_squeeze_objects(struct bnx2x *bp); + +void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag, + u32 verbose); + +/** + * bnx2x_set_os_driver_state - write driver state for management FW usage + * + * @bp: driver handle + * @state: OS_DRIVER_STATE_* value reflecting current driver state + */ +void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state); + +/** + * bnx2x_nvram_read - reads data from nvram [might sleep] + * + * @bp: driver handle + * @offset: byte offset in nvram + * @ret_buf: pointer to buffer where data is to be stored + * @buf_size: Length of 'ret_buf' in bytes + */ +int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf, + int buf_size); + +#endif /* BNX2X_CMN_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c new file mode 100644 index 000000000..2c6ba046d --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -0,0 +1,2585 @@ +/* bnx2x_dcb.c: QLogic Everest network driver. + * + * Copyright 2009-2013 Broadcom Corporation + * Copyright 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other QLogic software provided under a + * license other than the GPL, without QLogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Dmitry Kravkov + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/netdevice.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/rtnetlink.h> +#include <net/dcbnl.h> + +#include "bnx2x.h" +#include "bnx2x_cmn.h" +#include "bnx2x_dcb.h" + +/* forward declarations of dcbx related functions */ +static void bnx2x_pfc_set_pfc(struct bnx2x *bp); +static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp); +static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp, + u32 *set_configuration_ets_pg, + u32 *pri_pg_tbl); +static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp, + u32 *pg_pri_orginal_spread, + struct pg_help_data *help_data); +static void bnx2x_dcbx_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + u32 *pg_pri_orginal_spread); +static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + struct dcbx_ets_feature *ets); +static void bnx2x_dcbx_fw_struct(struct bnx2x *bp, + struct bnx2x_func_tx_start_params*); + +/* helpers: read/write len bytes from addr into buff by REG_RD/REG_WR */ +static void bnx2x_read_data(struct bnx2x *bp, u32 *buff, + u32 addr, u32 len) +{ + int i; + for (i = 0; i < len; i += 4, buff++) + *buff = REG_RD(bp, addr + i); +} + +static void bnx2x_write_data(struct bnx2x *bp, u32 *buff, + u32 addr, u32 len) +{ + int i; + for (i = 0; i < len; i += 4, buff++) + REG_WR(bp, addr + i, *buff); +} + +static void bnx2x_pfc_set(struct bnx2x *bp) +{ + struct bnx2x_nig_brb_pfc_port_params pfc_params = {0}; + u32 pri_bit, val = 0; + int i; + + pfc_params.num_of_rx_cos_priority_mask = + bp->dcbx_port_params.ets.num_of_cos; + + /* Tx COS configuration */ + for (i = 0; i < bp->dcbx_port_params.ets.num_of_cos; i++) + /* + * We configure only the pauseable bits (non pauseable aren't + * configured at all) it's done to avoid false pauses from + * network + */ + pfc_params.rx_cos_priority_mask[i] = + bp->dcbx_port_params.ets.cos_params[i].pri_bitmask + & DCBX_PFC_PRI_PAUSE_MASK(bp); + + /* + * Rx COS configuration + * Changing PFC RX configuration . + * In RX COS0 will always be configured to lossless and COS1 to lossy + */ + for (i = 0 ; i < MAX_PFC_PRIORITIES ; i++) { + pri_bit = 1 << i; + + if (!(pri_bit & DCBX_PFC_PRI_PAUSE_MASK(bp))) + val |= 1 << (i * 4); + } + + pfc_params.pkt_priority_to_cos = val; + + /* RX COS0 */ + pfc_params.llfc_low_priority_classes = DCBX_PFC_PRI_PAUSE_MASK(bp); + /* RX COS1 */ + pfc_params.llfc_high_priority_classes = 0; + + bnx2x_acquire_phy_lock(bp); + bp->link_params.feature_config_flags |= FEATURE_CONFIG_PFC_ENABLED; + bnx2x_update_pfc(&bp->link_params, &bp->link_vars, &pfc_params); + bnx2x_release_phy_lock(bp); +} + +static void bnx2x_pfc_clear(struct bnx2x *bp) +{ + struct bnx2x_nig_brb_pfc_port_params nig_params = {0}; + nig_params.pause_enable = 1; + bnx2x_acquire_phy_lock(bp); + bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_PFC_ENABLED; + bnx2x_update_pfc(&bp->link_params, &bp->link_vars, &nig_params); + bnx2x_release_phy_lock(bp); +} + +static void bnx2x_dump_dcbx_drv_param(struct bnx2x *bp, + struct dcbx_features *features, + u32 error) +{ + u8 i = 0; + DP(NETIF_MSG_LINK, "local_mib.error %x\n", error); + + /* PG */ + DP(NETIF_MSG_LINK, + "local_mib.features.ets.enabled %x\n", features->ets.enabled); + for (i = 0; i < DCBX_MAX_NUM_PG_BW_ENTRIES; i++) + DP(NETIF_MSG_LINK, + "local_mib.features.ets.pg_bw_tbl[%d] %d\n", i, + DCBX_PG_BW_GET(features->ets.pg_bw_tbl, i)); + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) + DP(NETIF_MSG_LINK, + "local_mib.features.ets.pri_pg_tbl[%d] %d\n", i, + DCBX_PRI_PG_GET(features->ets.pri_pg_tbl, i)); + + /* pfc */ + DP(BNX2X_MSG_DCB, "dcbx_features.pfc.pri_en_bitmap %x\n", + features->pfc.pri_en_bitmap); + DP(BNX2X_MSG_DCB, "dcbx_features.pfc.pfc_caps %x\n", + features->pfc.pfc_caps); + DP(BNX2X_MSG_DCB, "dcbx_features.pfc.enabled %x\n", + features->pfc.enabled); + + DP(BNX2X_MSG_DCB, "dcbx_features.app.default_pri %x\n", + features->app.default_pri); + DP(BNX2X_MSG_DCB, "dcbx_features.app.tc_supported %x\n", + features->app.tc_supported); + DP(BNX2X_MSG_DCB, "dcbx_features.app.enabled %x\n", + features->app.enabled); + for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { + DP(BNX2X_MSG_DCB, + "dcbx_features.app.app_pri_tbl[%x].app_id %x\n", + i, features->app.app_pri_tbl[i].app_id); + DP(BNX2X_MSG_DCB, + "dcbx_features.app.app_pri_tbl[%x].pri_bitmap %x\n", + i, features->app.app_pri_tbl[i].pri_bitmap); + DP(BNX2X_MSG_DCB, + "dcbx_features.app.app_pri_tbl[%x].appBitfield %x\n", + i, features->app.app_pri_tbl[i].appBitfield); + } +} + +static void bnx2x_dcbx_get_ap_priority(struct bnx2x *bp, + u8 pri_bitmap, + u8 llfc_traf_type) +{ + u32 pri = MAX_PFC_PRIORITIES; + u32 index = MAX_PFC_PRIORITIES - 1; + u32 pri_mask; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + + /* Choose the highest priority */ + while ((MAX_PFC_PRIORITIES == pri) && (0 != index)) { + pri_mask = 1 << index; + if (GET_FLAGS(pri_bitmap, pri_mask)) + pri = index ; + index--; + } + + if (pri < MAX_PFC_PRIORITIES) + ttp[llfc_traf_type] = max_t(u32, ttp[llfc_traf_type], pri); +} + +static void bnx2x_dcbx_get_ap_feature(struct bnx2x *bp, + struct dcbx_app_priority_feature *app, + u32 error) { + u8 index; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + u8 iscsi_pri_found = 0, fcoe_pri_found = 0; + + if (GET_FLAGS(error, DCBX_LOCAL_APP_ERROR)) + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_APP_ERROR\n"); + + if (GET_FLAGS(error, DCBX_LOCAL_APP_MISMATCH)) + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_APP_MISMATCH\n"); + + if (GET_FLAGS(error, DCBX_REMOTE_APP_TLV_NOT_FOUND)) + DP(BNX2X_MSG_DCB, "DCBX_REMOTE_APP_TLV_NOT_FOUND\n"); + if (app->enabled && + !GET_FLAGS(error, DCBX_LOCAL_APP_ERROR | DCBX_LOCAL_APP_MISMATCH | + DCBX_REMOTE_APP_TLV_NOT_FOUND)) { + + bp->dcbx_port_params.app.enabled = true; + + /* Use 0 as the default application priority for all. */ + for (index = 0 ; index < LLFC_DRIVER_TRAFFIC_TYPE_MAX; index++) + ttp[index] = 0; + + for (index = 0 ; index < DCBX_MAX_APP_PROTOCOL; index++) { + struct dcbx_app_priority_entry *entry = + app->app_pri_tbl; + enum traffic_type type = MAX_TRAFFIC_TYPE; + + if (GET_FLAGS(entry[index].appBitfield, + DCBX_APP_SF_DEFAULT) && + GET_FLAGS(entry[index].appBitfield, + DCBX_APP_SF_ETH_TYPE)) { + type = LLFC_TRAFFIC_TYPE_NW; + } else if (GET_FLAGS(entry[index].appBitfield, + DCBX_APP_SF_PORT) && + TCP_PORT_ISCSI == entry[index].app_id) { + type = LLFC_TRAFFIC_TYPE_ISCSI; + iscsi_pri_found = 1; + } else if (GET_FLAGS(entry[index].appBitfield, + DCBX_APP_SF_ETH_TYPE) && + ETH_TYPE_FCOE == entry[index].app_id) { + type = LLFC_TRAFFIC_TYPE_FCOE; + fcoe_pri_found = 1; + } + + if (type == MAX_TRAFFIC_TYPE) + continue; + + bnx2x_dcbx_get_ap_priority(bp, + entry[index].pri_bitmap, + type); + } + + /* If we have received a non-zero default application + * priority, then use that for applications which are + * not configured with any priority. + */ + if (ttp[LLFC_TRAFFIC_TYPE_NW] != 0) { + if (!iscsi_pri_found) { + ttp[LLFC_TRAFFIC_TYPE_ISCSI] = + ttp[LLFC_TRAFFIC_TYPE_NW]; + DP(BNX2X_MSG_DCB, + "ISCSI is using default priority.\n"); + } + if (!fcoe_pri_found) { + ttp[LLFC_TRAFFIC_TYPE_FCOE] = + ttp[LLFC_TRAFFIC_TYPE_NW]; + DP(BNX2X_MSG_DCB, + "FCoE is using default priority.\n"); + } + } + } else { + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_APP_DISABLED\n"); + bp->dcbx_port_params.app.enabled = false; + for (index = 0 ; index < LLFC_DRIVER_TRAFFIC_TYPE_MAX; index++) + ttp[index] = INVALID_TRAFFIC_TYPE_PRIORITY; + } +} + +static void bnx2x_dcbx_get_ets_feature(struct bnx2x *bp, + struct dcbx_ets_feature *ets, + u32 error) { + int i = 0; + u32 pg_pri_orginal_spread[DCBX_MAX_NUM_PG_BW_ENTRIES] = {0}; + struct pg_help_data pg_help_data; + struct bnx2x_dcbx_cos_params *cos_params = + bp->dcbx_port_params.ets.cos_params; + + memset(&pg_help_data, 0, sizeof(struct pg_help_data)); + + if (GET_FLAGS(error, DCBX_LOCAL_ETS_ERROR)) + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_ETS_ERROR\n"); + + if (GET_FLAGS(error, DCBX_REMOTE_ETS_TLV_NOT_FOUND)) + DP(BNX2X_MSG_DCB, "DCBX_REMOTE_ETS_TLV_NOT_FOUND\n"); + + /* Clean up old settings of ets on COS */ + for (i = 0; i < ARRAY_SIZE(bp->dcbx_port_params.ets.cos_params) ; i++) { + cos_params[i].pauseable = false; + cos_params[i].strict = BNX2X_DCBX_STRICT_INVALID; + cos_params[i].bw_tbl = DCBX_INVALID_COS_BW; + cos_params[i].pri_bitmask = 0; + } + + if (bp->dcbx_port_params.app.enabled && ets->enabled && + !GET_FLAGS(error, + DCBX_LOCAL_ETS_ERROR | DCBX_REMOTE_ETS_TLV_NOT_FOUND)) { + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_ETS_ENABLE\n"); + bp->dcbx_port_params.ets.enabled = true; + + bnx2x_dcbx_get_ets_pri_pg_tbl(bp, + pg_pri_orginal_spread, + ets->pri_pg_tbl); + + bnx2x_dcbx_get_num_pg_traf_type(bp, + pg_pri_orginal_spread, + &pg_help_data); + + bnx2x_dcbx_fill_cos_params(bp, &pg_help_data, + ets, pg_pri_orginal_spread); + + } else { + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_ETS_DISABLED\n"); + bp->dcbx_port_params.ets.enabled = false; + ets->pri_pg_tbl[0] = 0; + + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES ; i++) + DCBX_PG_BW_SET(ets->pg_bw_tbl, i, 1); + } +} + +static void bnx2x_dcbx_get_pfc_feature(struct bnx2x *bp, + struct dcbx_pfc_feature *pfc, u32 error) +{ + if (GET_FLAGS(error, DCBX_LOCAL_PFC_ERROR)) + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_PFC_ERROR\n"); + + if (GET_FLAGS(error, DCBX_REMOTE_PFC_TLV_NOT_FOUND)) + DP(BNX2X_MSG_DCB, "DCBX_REMOTE_PFC_TLV_NOT_FOUND\n"); + if (bp->dcbx_port_params.app.enabled && pfc->enabled && + !GET_FLAGS(error, DCBX_LOCAL_PFC_ERROR | DCBX_LOCAL_PFC_MISMATCH | + DCBX_REMOTE_PFC_TLV_NOT_FOUND)) { + bp->dcbx_port_params.pfc.enabled = true; + bp->dcbx_port_params.pfc.priority_non_pauseable_mask = + ~(pfc->pri_en_bitmap); + } else { + DP(BNX2X_MSG_DCB, "DCBX_LOCAL_PFC_DISABLED\n"); + bp->dcbx_port_params.pfc.enabled = false; + bp->dcbx_port_params.pfc.priority_non_pauseable_mask = 0; + } +} + +/* maps unmapped priorities to to the same COS as L2 */ +static void bnx2x_dcbx_map_nw(struct bnx2x *bp) +{ + int i; + u32 unmapped = (1 << MAX_PFC_PRIORITIES) - 1; /* all ones */ + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + u32 nw_prio = 1 << ttp[LLFC_TRAFFIC_TYPE_NW]; + struct bnx2x_dcbx_cos_params *cos_params = + bp->dcbx_port_params.ets.cos_params; + + /* get unmapped priorities by clearing mapped bits */ + for (i = 0; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) + unmapped &= ~(1 << ttp[i]); + + /* find cos for nw prio and extend it with unmapped */ + for (i = 0; i < ARRAY_SIZE(bp->dcbx_port_params.ets.cos_params); i++) { + if (cos_params[i].pri_bitmask & nw_prio) { + /* extend the bitmask with unmapped */ + DP(BNX2X_MSG_DCB, + "cos %d extended with 0x%08x\n", i, unmapped); + cos_params[i].pri_bitmask |= unmapped; + break; + } + } +} + +static void bnx2x_get_dcbx_drv_param(struct bnx2x *bp, + struct dcbx_features *features, + u32 error) +{ + bnx2x_dcbx_get_ap_feature(bp, &features->app, error); + + bnx2x_dcbx_get_pfc_feature(bp, &features->pfc, error); + + bnx2x_dcbx_get_ets_feature(bp, &features->ets, error); + + bnx2x_dcbx_map_nw(bp); +} + +#define DCBX_LOCAL_MIB_MAX_TRY_READ (100) +static int bnx2x_dcbx_read_mib(struct bnx2x *bp, + u32 *base_mib_addr, + u32 offset, + int read_mib_type) +{ + int max_try_read = 0; + u32 mib_size, prefix_seq_num, suffix_seq_num; + struct lldp_remote_mib *remote_mib ; + struct lldp_local_mib *local_mib; + + switch (read_mib_type) { + case DCBX_READ_LOCAL_MIB: + mib_size = sizeof(struct lldp_local_mib); + break; + case DCBX_READ_REMOTE_MIB: + mib_size = sizeof(struct lldp_remote_mib); + break; + default: + return 1; /*error*/ + } + + offset += BP_PORT(bp) * mib_size; + + do { + bnx2x_read_data(bp, base_mib_addr, offset, mib_size); + + max_try_read++; + + switch (read_mib_type) { + case DCBX_READ_LOCAL_MIB: + local_mib = (struct lldp_local_mib *) base_mib_addr; + prefix_seq_num = local_mib->prefix_seq_num; + suffix_seq_num = local_mib->suffix_seq_num; + break; + case DCBX_READ_REMOTE_MIB: + remote_mib = (struct lldp_remote_mib *) base_mib_addr; + prefix_seq_num = remote_mib->prefix_seq_num; + suffix_seq_num = remote_mib->suffix_seq_num; + break; + default: + return 1; /*error*/ + } + } while ((prefix_seq_num != suffix_seq_num) && + (max_try_read < DCBX_LOCAL_MIB_MAX_TRY_READ)); + + if (max_try_read >= DCBX_LOCAL_MIB_MAX_TRY_READ) { + BNX2X_ERR("MIB could not be read\n"); + return 1; + } + + return 0; +} + +static void bnx2x_pfc_set_pfc(struct bnx2x *bp) +{ + int mfw_configured = SHMEM2_HAS(bp, drv_flags) && + GET_FLAGS(SHMEM2_RD(bp, drv_flags), + 1 << DRV_FLAGS_DCB_MFW_CONFIGURED); + + if (bp->dcbx_port_params.pfc.enabled && + (!(bp->dcbx_error & DCBX_REMOTE_MIB_ERROR) || mfw_configured)) + /* + * 1. Fills up common PFC structures if required + * 2. Configure NIG, MAC and BRB via the elink + */ + bnx2x_pfc_set(bp); + else + bnx2x_pfc_clear(bp); +} + +int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + int rc; + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_TX_STOP; + + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + DP(BNX2X_MSG_DCB, "STOP TRAFFIC\n"); + + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { + BNX2X_ERR("Unable to hold traffic for HW configuration\n"); + bnx2x_panic(); + } + + return rc; +} + +int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_tx_start_params *tx_params = + &func_params.params.tx_start; + int rc; + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_TX_START; + + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + bnx2x_dcbx_fw_struct(bp, tx_params); + + DP(BNX2X_MSG_DCB, "START TRAFFIC\n"); + + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { + BNX2X_ERR("Unable to resume traffic after HW configuration\n"); + bnx2x_panic(); + } + + return rc; +} + +static void bnx2x_dcbx_2cos_limit_update_ets_config(struct bnx2x *bp) +{ + struct bnx2x_dcbx_pg_params *ets = &(bp->dcbx_port_params.ets); + int rc = 0; + + if (ets->num_of_cos == 0 || ets->num_of_cos > DCBX_COS_MAX_NUM_E2) { + BNX2X_ERR("Illegal number of COSes %d\n", ets->num_of_cos); + return; + } + + /* valid COS entries */ + if (ets->num_of_cos == 1) /* no ETS */ + return; + + /* sanity */ + if (((BNX2X_DCBX_STRICT_INVALID == ets->cos_params[0].strict) && + (DCBX_INVALID_COS_BW == ets->cos_params[0].bw_tbl)) || + ((BNX2X_DCBX_STRICT_INVALID == ets->cos_params[1].strict) && + (DCBX_INVALID_COS_BW == ets->cos_params[1].bw_tbl))) { + BNX2X_ERR("all COS should have at least bw_limit or strict" + "ets->cos_params[0].strict= %x" + "ets->cos_params[0].bw_tbl= %x" + "ets->cos_params[1].strict= %x" + "ets->cos_params[1].bw_tbl= %x", + ets->cos_params[0].strict, + ets->cos_params[0].bw_tbl, + ets->cos_params[1].strict, + ets->cos_params[1].bw_tbl); + return; + } + /* If we join a group and there is bw_tbl and strict then bw rules */ + if ((DCBX_INVALID_COS_BW != ets->cos_params[0].bw_tbl) && + (DCBX_INVALID_COS_BW != ets->cos_params[1].bw_tbl)) { + u32 bw_tbl_0 = ets->cos_params[0].bw_tbl; + u32 bw_tbl_1 = ets->cos_params[1].bw_tbl; + /* Do not allow 0-100 configuration + * since PBF does not support it + * force 1-99 instead + */ + if (bw_tbl_0 == 0) { + bw_tbl_0 = 1; + bw_tbl_1 = 99; + } else if (bw_tbl_1 == 0) { + bw_tbl_1 = 1; + bw_tbl_0 = 99; + } + + bnx2x_ets_bw_limit(&bp->link_params, bw_tbl_0, bw_tbl_1); + } else { + if (ets->cos_params[0].strict == BNX2X_DCBX_STRICT_COS_HIGHEST) + rc = bnx2x_ets_strict(&bp->link_params, 0); + else if (ets->cos_params[1].strict + == BNX2X_DCBX_STRICT_COS_HIGHEST) + rc = bnx2x_ets_strict(&bp->link_params, 1); + if (rc) + BNX2X_ERR("update_ets_params failed\n"); + } +} + +/* + * In E3B0 the configuration may have more than 2 COS. + */ +static void bnx2x_dcbx_update_ets_config(struct bnx2x *bp) +{ + struct bnx2x_dcbx_pg_params *ets = &(bp->dcbx_port_params.ets); + struct bnx2x_ets_params ets_params = { 0 }; + u8 i; + + ets_params.num_of_cos = ets->num_of_cos; + + for (i = 0; i < ets->num_of_cos; i++) { + /* COS is SP */ + if (ets->cos_params[i].strict != BNX2X_DCBX_STRICT_INVALID) { + if (ets->cos_params[i].bw_tbl != DCBX_INVALID_COS_BW) { + BNX2X_ERR("COS can't be not BW and not SP\n"); + return; + } + + ets_params.cos[i].state = bnx2x_cos_state_strict; + ets_params.cos[i].params.sp_params.pri = + ets->cos_params[i].strict; + } else { /* COS is BW */ + if (ets->cos_params[i].bw_tbl == DCBX_INVALID_COS_BW) { + BNX2X_ERR("COS can't be not BW and not SP\n"); + return; + } + ets_params.cos[i].state = bnx2x_cos_state_bw; + ets_params.cos[i].params.bw_params.bw = + (u8)ets->cos_params[i].bw_tbl; + } + } + + /* Configure the ETS in HW */ + if (bnx2x_ets_e3b0_config(&bp->link_params, &bp->link_vars, + &ets_params)) { + BNX2X_ERR("bnx2x_ets_e3b0_config failed\n"); + bnx2x_ets_disabled(&bp->link_params, &bp->link_vars); + } +} + +static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp) +{ + int mfw_configured = SHMEM2_HAS(bp, drv_flags) && + GET_FLAGS(SHMEM2_RD(bp, drv_flags), + 1 << DRV_FLAGS_DCB_MFW_CONFIGURED); + + bnx2x_ets_disabled(&bp->link_params, &bp->link_vars); + + if (!bp->dcbx_port_params.ets.enabled || + ((bp->dcbx_error & DCBX_REMOTE_MIB_ERROR) && !mfw_configured)) + return; + + if (CHIP_IS_E3B0(bp)) + bnx2x_dcbx_update_ets_config(bp); + else + bnx2x_dcbx_2cos_limit_update_ets_config(bp); +} + +#ifdef BCM_DCBNL +static int bnx2x_dcbx_read_shmem_remote_mib(struct bnx2x *bp) +{ + struct lldp_remote_mib remote_mib = {0}; + u32 dcbx_remote_mib_offset = SHMEM2_RD(bp, dcbx_remote_mib_offset); + int rc; + + DP(BNX2X_MSG_DCB, "dcbx_remote_mib_offset 0x%x\n", + dcbx_remote_mib_offset); + + if (SHMEM_DCBX_REMOTE_MIB_NONE == dcbx_remote_mib_offset) { + BNX2X_ERR("FW doesn't support dcbx_remote_mib_offset\n"); + return -EINVAL; + } + + rc = bnx2x_dcbx_read_mib(bp, (u32 *)&remote_mib, dcbx_remote_mib_offset, + DCBX_READ_REMOTE_MIB); + + if (rc) { + BNX2X_ERR("Failed to read remote mib from FW\n"); + return rc; + } + + /* save features and flags */ + bp->dcbx_remote_feat = remote_mib.features; + bp->dcbx_remote_flags = remote_mib.flags; + return 0; +} +#endif + +static int bnx2x_dcbx_read_shmem_neg_results(struct bnx2x *bp) +{ + struct lldp_local_mib local_mib = {0}; + u32 dcbx_neg_res_offset = SHMEM2_RD(bp, dcbx_neg_res_offset); + int rc; + + DP(BNX2X_MSG_DCB, "dcbx_neg_res_offset 0x%x\n", dcbx_neg_res_offset); + + if (SHMEM_DCBX_NEG_RES_NONE == dcbx_neg_res_offset) { + BNX2X_ERR("FW doesn't support dcbx_neg_res_offset\n"); + return -EINVAL; + } + + rc = bnx2x_dcbx_read_mib(bp, (u32 *)&local_mib, dcbx_neg_res_offset, + DCBX_READ_LOCAL_MIB); + + if (rc) { + BNX2X_ERR("Failed to read local mib from FW\n"); + return rc; + } + + /* save features and error */ + bp->dcbx_local_feat = local_mib.features; + bp->dcbx_error = local_mib.error; + return 0; +} + +#ifdef BCM_DCBNL +static inline +u8 bnx2x_dcbx_dcbnl_app_up(struct dcbx_app_priority_entry *ent) +{ + u8 pri; + + /* Choose the highest priority */ + for (pri = MAX_PFC_PRIORITIES - 1; pri > 0; pri--) + if (ent->pri_bitmap & (1 << pri)) + break; + return pri; +} + +static inline +u8 bnx2x_dcbx_dcbnl_app_idtype(struct dcbx_app_priority_entry *ent) +{ + return ((ent->appBitfield & DCBX_APP_ENTRY_SF_MASK) == + DCBX_APP_SF_PORT) ? DCB_APP_IDTYPE_PORTNUM : + DCB_APP_IDTYPE_ETHTYPE; +} + +int bnx2x_dcbnl_update_applist(struct bnx2x *bp, bool delall) +{ + int i, err = 0; + + for (i = 0; i < DCBX_MAX_APP_PROTOCOL && err == 0; i++) { + struct dcbx_app_priority_entry *ent = + &bp->dcbx_local_feat.app.app_pri_tbl[i]; + + if (ent->appBitfield & DCBX_APP_ENTRY_VALID) { + u8 up = bnx2x_dcbx_dcbnl_app_up(ent); + + /* avoid invalid user-priority */ + if (up) { + struct dcb_app app; + app.selector = bnx2x_dcbx_dcbnl_app_idtype(ent); + app.protocol = ent->app_id; + app.priority = delall ? 0 : up; + err = dcb_setapp(bp->dev, &app); + } + } + } + return err; +} +#endif + +static inline void bnx2x_dcbx_update_tc_mapping(struct bnx2x *bp) +{ + u8 prio, cos; + for (cos = 0; cos < bp->dcbx_port_params.ets.num_of_cos; cos++) { + for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) { + if (bp->dcbx_port_params.ets.cos_params[cos].pri_bitmask + & (1 << prio)) { + bp->prio_to_cos[prio] = cos; + DP(BNX2X_MSG_DCB, + "tx_mapping %d --> %d\n", prio, cos); + } + } + } + + /* setup tc must be called under rtnl lock, but we can't take it here + * as we are handling an attention on a work queue which must be + * flushed at some rtnl-locked contexts (e.g. if down) + */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_SETUP_TC, 0); +} + +void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state) +{ + switch (state) { + case BNX2X_DCBX_STATE_NEG_RECEIVED: + { + DP(BNX2X_MSG_DCB, "BNX2X_DCBX_STATE_NEG_RECEIVED\n"); +#ifdef BCM_DCBNL + /** + * Delete app tlvs from dcbnl before reading new + * negotiation results + */ + bnx2x_dcbnl_update_applist(bp, true); + + /* Read remote mib if dcbx is in the FW */ + if (bnx2x_dcbx_read_shmem_remote_mib(bp)) + return; +#endif + /* Read neg results if dcbx is in the FW */ + if (bnx2x_dcbx_read_shmem_neg_results(bp)) + return; + + bnx2x_dump_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + + bnx2x_get_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + + /* mark DCBX result for PMF migration */ + bnx2x_update_drv_flags(bp, + 1 << DRV_FLAGS_DCB_CONFIGURED, + 1); +#ifdef BCM_DCBNL + /* + * Add new app tlvs to dcbnl + */ + bnx2x_dcbnl_update_applist(bp, false); +#endif + /* + * reconfigure the netdevice with the results of the new + * dcbx negotiation. + */ + bnx2x_dcbx_update_tc_mapping(bp); + + /* + * allow other functions to update their netdevices + * accordingly + */ + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); + + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_TX_STOP, 0); + return; + } + case BNX2X_DCBX_STATE_TX_PAUSED: + DP(BNX2X_MSG_DCB, "BNX2X_DCBX_STATE_TX_PAUSED\n"); + bnx2x_pfc_set_pfc(bp); + + bnx2x_dcbx_update_ets_params(bp); + + /* ets may affect cmng configuration: reinit it in hw */ + bnx2x_set_local_cmng(bp); + return; + case BNX2X_DCBX_STATE_TX_RELEASED: + DP(BNX2X_MSG_DCB, "BNX2X_DCBX_STATE_TX_RELEASED\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_DCBX_PMF_DRV_OK, 0); +#ifdef BCM_DCBNL + /* + * Send a notification for the new negotiated parameters + */ + dcbnl_cee_notify(bp->dev, RTM_GETDCB, DCB_CMD_CEE_GET, 0, 0); +#endif + return; + default: + BNX2X_ERR("Unknown DCBX_STATE\n"); + } +} + +#define LLDP_ADMIN_MIB_OFFSET(bp) (PORT_MAX*sizeof(struct lldp_params) + \ + BP_PORT(bp)*sizeof(struct lldp_admin_mib)) + +static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp, + u32 dcbx_lldp_params_offset) +{ + struct lldp_admin_mib admin_mib; + u32 i, other_traf_type = PREDEFINED_APP_IDX_MAX, traf_type = 0; + u32 offset = dcbx_lldp_params_offset + LLDP_ADMIN_MIB_OFFSET(bp); + + /*shortcuts*/ + struct dcbx_features *af = &admin_mib.features; + struct bnx2x_config_dcbx_params *dp = &bp->dcbx_config_params; + + memset(&admin_mib, 0, sizeof(struct lldp_admin_mib)); + + /* Read the data first */ + bnx2x_read_data(bp, (u32 *)&admin_mib, offset, + sizeof(struct lldp_admin_mib)); + + if (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_ON) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_DCBX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_DCBX_ENABLED); + + if (dp->overwrite_settings == BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE) { + + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_CEE_VERSION_MASK); + admin_mib.ver_cfg_flags |= + (dp->admin_dcbx_version << DCBX_CEE_VERSION_SHIFT) & + DCBX_CEE_VERSION_MASK; + + af->ets.enabled = (u8)dp->admin_ets_enable; + + af->pfc.enabled = (u8)dp->admin_pfc_enable; + + /* FOR IEEE dp->admin_tc_supported_tx_enable */ + if (dp->admin_ets_configuration_tx_enable) + SET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_ETS_CONFIG_TX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_ETS_CONFIG_TX_ENABLED); + /* For IEEE admin_ets_recommendation_tx_enable */ + if (dp->admin_pfc_tx_enable) + SET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_PFC_CONFIG_TX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_PFC_CONFIG_TX_ENABLED); + + if (dp->admin_application_priority_tx_enable) + SET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_APP_CONFIG_TX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_APP_CONFIG_TX_ENABLED); + + if (dp->admin_ets_willing) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_ETS_WILLING); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_ETS_WILLING); + /* For IEEE admin_ets_reco_valid */ + if (dp->admin_pfc_willing) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_PFC_WILLING); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_PFC_WILLING); + + if (dp->admin_app_priority_willing) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_APP_WILLING); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_APP_WILLING); + + for (i = 0 ; i < DCBX_MAX_NUM_PG_BW_ENTRIES; i++) { + DCBX_PG_BW_SET(af->ets.pg_bw_tbl, i, + (u8)dp->admin_configuration_bw_precentage[i]); + + DP(BNX2X_MSG_DCB, "pg_bw_tbl[%d] = %02x\n", + i, DCBX_PG_BW_GET(af->ets.pg_bw_tbl, i)); + } + + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) { + DCBX_PRI_PG_SET(af->ets.pri_pg_tbl, i, + (u8)dp->admin_configuration_ets_pg[i]); + + DP(BNX2X_MSG_DCB, "pri_pg_tbl[%d] = %02x\n", + i, DCBX_PRI_PG_GET(af->ets.pri_pg_tbl, i)); + } + + /*For IEEE admin_recommendation_bw_percentage + *For IEEE admin_recommendation_ets_pg */ + af->pfc.pri_en_bitmap = (u8)dp->admin_pfc_bitmap; + for (i = 0; i < DCBX_CONFIG_MAX_APP_PROTOCOL; i++) { + if (dp->admin_priority_app_table[i].valid) { + struct bnx2x_admin_priority_app_table *table = + dp->admin_priority_app_table; + if ((ETH_TYPE_FCOE == table[i].app_id) && + (TRAFFIC_TYPE_ETH == table[i].traffic_type)) + traf_type = FCOE_APP_IDX; + else if ((TCP_PORT_ISCSI == table[i].app_id) && + (TRAFFIC_TYPE_PORT == table[i].traffic_type)) + traf_type = ISCSI_APP_IDX; + else + traf_type = other_traf_type++; + + af->app.app_pri_tbl[traf_type].app_id = + table[i].app_id; + + af->app.app_pri_tbl[traf_type].pri_bitmap = + (u8)(1 << table[i].priority); + + af->app.app_pri_tbl[traf_type].appBitfield = + (DCBX_APP_ENTRY_VALID); + + af->app.app_pri_tbl[traf_type].appBitfield |= + (TRAFFIC_TYPE_ETH == table[i].traffic_type) ? + DCBX_APP_SF_ETH_TYPE : DCBX_APP_SF_PORT; + } + } + + af->app.default_pri = (u8)dp->admin_default_priority; + } + + /* Write the data. */ + bnx2x_write_data(bp, (u32 *)&admin_mib, offset, + sizeof(struct lldp_admin_mib)); +} + +void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled) +{ + if (!CHIP_IS_E1x(bp)) { + bp->dcb_state = dcb_on; + bp->dcbx_enabled = dcbx_enabled; + } else { + bp->dcb_state = false; + bp->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID; + } + DP(BNX2X_MSG_DCB, "DCB state [%s:%s]\n", + dcb_on ? "ON" : "OFF", + dcbx_enabled == BNX2X_DCBX_ENABLED_OFF ? "user-mode" : + dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_OFF ? "on-chip static" : + dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_ON ? + "on-chip with negotiation" : "invalid"); +} + +void bnx2x_dcbx_init_params(struct bnx2x *bp) +{ + bp->dcbx_config_params.admin_dcbx_version = 0x0; /* 0 - CEE; 1 - IEEE */ + bp->dcbx_config_params.admin_ets_willing = 1; + bp->dcbx_config_params.admin_pfc_willing = 1; + bp->dcbx_config_params.overwrite_settings = 1; + bp->dcbx_config_params.admin_ets_enable = 1; + bp->dcbx_config_params.admin_pfc_enable = 1; + bp->dcbx_config_params.admin_tc_supported_tx_enable = 1; + bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1; + bp->dcbx_config_params.admin_pfc_tx_enable = 1; + bp->dcbx_config_params.admin_application_priority_tx_enable = 1; + bp->dcbx_config_params.admin_ets_reco_valid = 1; + bp->dcbx_config_params.admin_app_priority_willing = 1; + bp->dcbx_config_params.admin_configuration_bw_precentage[0] = 100; + bp->dcbx_config_params.admin_configuration_bw_precentage[1] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[2] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[3] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[4] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[5] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[6] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[7] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[0] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[1] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[2] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[3] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[4] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[5] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[6] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[7] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[0] = 100; + bp->dcbx_config_params.admin_recommendation_bw_precentage[1] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[2] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[3] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[4] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[5] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[6] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[7] = 0; + bp->dcbx_config_params.admin_recommendation_ets_pg[0] = 0; + bp->dcbx_config_params.admin_recommendation_ets_pg[1] = 1; + bp->dcbx_config_params.admin_recommendation_ets_pg[2] = 2; + bp->dcbx_config_params.admin_recommendation_ets_pg[3] = 3; + bp->dcbx_config_params.admin_recommendation_ets_pg[4] = 4; + bp->dcbx_config_params.admin_recommendation_ets_pg[5] = 5; + bp->dcbx_config_params.admin_recommendation_ets_pg[6] = 6; + bp->dcbx_config_params.admin_recommendation_ets_pg[7] = 7; + bp->dcbx_config_params.admin_pfc_bitmap = 0x0; + bp->dcbx_config_params.admin_priority_app_table[0].valid = 0; + bp->dcbx_config_params.admin_priority_app_table[1].valid = 0; + bp->dcbx_config_params.admin_priority_app_table[2].valid = 0; + bp->dcbx_config_params.admin_priority_app_table[3].valid = 0; + bp->dcbx_config_params.admin_default_priority = 0; +} + +void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem) +{ + u32 dcbx_lldp_params_offset = SHMEM_LLDP_DCBX_PARAMS_NONE; + + /* only PMF can send ADMIN msg to MFW in old MFW versions */ + if ((!bp->port.pmf) && (!(bp->flags & BC_SUPPORTS_DCBX_MSG_NON_PMF))) + return; + + if (bp->dcbx_enabled <= 0) + return; + + /* validate: + * chip of good for dcbx version, + * dcb is wanted + * shmem2 contains DCBX support fields + */ + DP(BNX2X_MSG_DCB, "dcb_state %d bp->port.pmf %d\n", + bp->dcb_state, bp->port.pmf); + + if (bp->dcb_state == BNX2X_DCB_STATE_ON && + SHMEM2_HAS(bp, dcbx_lldp_params_offset)) { + dcbx_lldp_params_offset = + SHMEM2_RD(bp, dcbx_lldp_params_offset); + + DP(BNX2X_MSG_DCB, "dcbx_lldp_params_offset 0x%x\n", + dcbx_lldp_params_offset); + + bnx2x_update_drv_flags(bp, 1 << DRV_FLAGS_DCB_CONFIGURED, 0); + + if (SHMEM_LLDP_DCBX_PARAMS_NONE != dcbx_lldp_params_offset) { + /* need HW lock to avoid scenario of two drivers + * writing in parallel to shmem + */ + bnx2x_acquire_hw_lock(bp, + HW_LOCK_RESOURCE_DCBX_ADMIN_MIB); + if (update_shmem) + bnx2x_dcbx_admin_mib_updated_params(bp, + dcbx_lldp_params_offset); + + /* Let HW start negotiation */ + bnx2x_fw_command(bp, + DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG, 0); + /* release HW lock only after MFW acks that it finished + * reading values from shmem + */ + bnx2x_release_hw_lock(bp, + HW_LOCK_RESOURCE_DCBX_ADMIN_MIB); + } + } +} +static void +bnx2x_dcbx_print_cos_params(struct bnx2x *bp, + struct bnx2x_func_tx_start_params *pfc_fw_cfg) +{ + u8 pri = 0; + u8 cos = 0; + + DP(BNX2X_MSG_DCB, + "pfc_fw_cfg->dcb_version %x\n", pfc_fw_cfg->dcb_version); + DP(BNX2X_MSG_DCB, + "pdev->params.dcbx_port_params.pfc.priority_non_pauseable_mask %x\n", + bp->dcbx_port_params.pfc.priority_non_pauseable_mask); + + for (cos = 0 ; cos < bp->dcbx_port_params.ets.num_of_cos ; cos++) { + DP(BNX2X_MSG_DCB, + "pdev->params.dcbx_port_params.ets.cos_params[%d].pri_bitmask %x\n", + cos, bp->dcbx_port_params.ets.cos_params[cos].pri_bitmask); + + DP(BNX2X_MSG_DCB, + "pdev->params.dcbx_port_params.ets.cos_params[%d].bw_tbl %x\n", + cos, bp->dcbx_port_params.ets.cos_params[cos].bw_tbl); + + DP(BNX2X_MSG_DCB, + "pdev->params.dcbx_port_params.ets.cos_params[%d].strict %x\n", + cos, bp->dcbx_port_params.ets.cos_params[cos].strict); + + DP(BNX2X_MSG_DCB, + "pdev->params.dcbx_port_params.ets.cos_params[%d].pauseable %x\n", + cos, bp->dcbx_port_params.ets.cos_params[cos].pauseable); + } + + for (pri = 0; pri < LLFC_DRIVER_TRAFFIC_TYPE_MAX; pri++) { + DP(BNX2X_MSG_DCB, + "pfc_fw_cfg->traffic_type_to_priority_cos[%d].priority %x\n", + pri, pfc_fw_cfg->traffic_type_to_priority_cos[pri].priority); + + DP(BNX2X_MSG_DCB, + "pfc_fw_cfg->traffic_type_to_priority_cos[%d].cos %x\n", + pri, pfc_fw_cfg->traffic_type_to_priority_cos[pri].cos); + } +} + +/* fills help_data according to pg_info */ +static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp, + u32 *pg_pri_orginal_spread, + struct pg_help_data *help_data) +{ + bool pg_found = false; + u32 i, traf_type, add_traf_type, add_pg; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + struct pg_entry_help_data *data = help_data->data; /*shortcut*/ + + /* Set to invalid */ + for (i = 0; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) + data[i].pg = DCBX_ILLEGAL_PG; + + for (add_traf_type = 0; + add_traf_type < LLFC_DRIVER_TRAFFIC_TYPE_MAX; add_traf_type++) { + pg_found = false; + if (ttp[add_traf_type] < MAX_PFC_PRIORITIES) { + add_pg = (u8)pg_pri_orginal_spread[ttp[add_traf_type]]; + for (traf_type = 0; + traf_type < LLFC_DRIVER_TRAFFIC_TYPE_MAX; + traf_type++) { + if (data[traf_type].pg == add_pg) { + if (!(data[traf_type].pg_priority & + (1 << ttp[add_traf_type]))) + data[traf_type]. + num_of_dif_pri++; + data[traf_type].pg_priority |= + (1 << ttp[add_traf_type]); + pg_found = true; + break; + } + } + if (false == pg_found) { + data[help_data->num_of_pg].pg = add_pg; + data[help_data->num_of_pg].pg_priority = + (1 << ttp[add_traf_type]); + data[help_data->num_of_pg].num_of_dif_pri = 1; + help_data->num_of_pg++; + } + } + DP(BNX2X_MSG_DCB, + "add_traf_type %d pg_found %s num_of_pg %d\n", + add_traf_type, (false == pg_found) ? "NO" : "YES", + help_data->num_of_pg); + } +} + +static void bnx2x_dcbx_ets_disabled_entry_data(struct bnx2x *bp, + struct cos_help_data *cos_data, + u32 pri_join_mask) +{ + /* Only one priority than only one COS */ + cos_data->data[0].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + cos_data->data[0].pri_join_mask = pri_join_mask; + cos_data->data[0].cos_bw = 100; + cos_data->num_of_cos = 1; +} + +static inline void bnx2x_dcbx_add_to_cos_bw(struct bnx2x *bp, + struct cos_entry_help_data *data, + u8 pg_bw) +{ + if (data->cos_bw == DCBX_INVALID_COS_BW) + data->cos_bw = pg_bw; + else + data->cos_bw += pg_bw; +} + +static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + struct dcbx_ets_feature *ets) +{ + u32 pri_tested = 0; + u8 i = 0; + u8 entry = 0; + u8 pg_entry = 0; + u8 num_of_pri = LLFC_DRIVER_TRAFFIC_TYPE_MAX; + + cos_data->data[0].pausable = true; + cos_data->data[1].pausable = false; + cos_data->data[0].pri_join_mask = cos_data->data[1].pri_join_mask = 0; + + for (i = 0 ; i < num_of_pri ; i++) { + pri_tested = 1 << bp->dcbx_port_params. + app.traffic_type_priority[i]; + + if (pri_tested & DCBX_PFC_PRI_NON_PAUSE_MASK(bp)) { + cos_data->data[1].pri_join_mask |= pri_tested; + entry = 1; + } else { + cos_data->data[0].pri_join_mask |= pri_tested; + entry = 0; + } + pg_entry = (u8)pg_pri_orginal_spread[bp->dcbx_port_params. + app.traffic_type_priority[i]]; + /* There can be only one strict pg */ + if (pg_entry < DCBX_MAX_NUM_PG_BW_ENTRIES) + bnx2x_dcbx_add_to_cos_bw(bp, &cos_data->data[entry], + DCBX_PG_BW_GET(ets->pg_bw_tbl, pg_entry)); + else + /* If we join a group and one is strict + * than the bw rules + */ + cos_data->data[entry].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + if ((0 == cos_data->data[0].pri_join_mask) && + (0 == cos_data->data[1].pri_join_mask)) + BNX2X_ERR("dcbx error: Both groups must have priorities\n"); +} + +#ifndef POWER_OF_2 +#define POWER_OF_2(x) ((0 != x) && (0 == (x & (x-1)))) +#endif + +static void bnx2x_dcbx_2cos_limit_cee_single_pg_to_cos_params(struct bnx2x *bp, + struct pg_help_data *pg_help_data, + struct cos_help_data *cos_data, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + u8 i = 0; + u32 pri_tested = 0; + u32 pri_mask_without_pri = 0; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + /*debug*/ + if (num_of_dif_pri == 1) { + bnx2x_dcbx_ets_disabled_entry_data(bp, cos_data, pri_join_mask); + return; + } + /* single priority group */ + if (pg_help_data->data[0].pg < DCBX_MAX_NUM_PG_BW_ENTRIES) { + /* If there are both pauseable and non-pauseable priorities, + * the pauseable priorities go to the first queue and + * the non-pauseable priorities go to the second queue. + */ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) { + /* Pauseable */ + cos_data->data[0].pausable = true; + /* Non pauseable.*/ + cos_data->data[1].pausable = false; + + if (2 == num_of_dif_pri) { + cos_data->data[0].cos_bw = 50; + cos_data->data[1].cos_bw = 50; + } + + if (3 == num_of_dif_pri) { + if (POWER_OF_2(DCBX_PFC_PRI_GET_PAUSE(bp, + pri_join_mask))) { + cos_data->data[0].cos_bw = 33; + cos_data->data[1].cos_bw = 67; + } else { + cos_data->data[0].cos_bw = 67; + cos_data->data[1].cos_bw = 33; + } + } + + } else if (IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask)) { + /* If there are only pauseable priorities, + * then one/two priorities go to the first queue + * and one priority goes to the second queue. + */ + if (2 == num_of_dif_pri) { + cos_data->data[0].cos_bw = 50; + cos_data->data[1].cos_bw = 50; + } else { + cos_data->data[0].cos_bw = 67; + cos_data->data[1].cos_bw = 33; + } + cos_data->data[1].pausable = true; + cos_data->data[0].pausable = true; + /* All priorities except FCOE */ + cos_data->data[0].pri_join_mask = (pri_join_mask & + ((u8)~(1 << ttp[LLFC_TRAFFIC_TYPE_FCOE]))); + /* Only FCOE priority.*/ + cos_data->data[1].pri_join_mask = + (1 << ttp[LLFC_TRAFFIC_TYPE_FCOE]); + } else + /* If there are only non-pauseable priorities, + * they will all go to the same queue. + */ + bnx2x_dcbx_ets_disabled_entry_data(bp, + cos_data, pri_join_mask); + } else { + /* priority group which is not BW limited (PG#15):*/ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) { + /* If there are both pauseable and non-pauseable + * priorities, the pauseable priorities go to the first + * queue and the non-pauseable priorities + * go to the second queue. + */ + if (DCBX_PFC_PRI_GET_PAUSE(bp, pri_join_mask) > + DCBX_PFC_PRI_GET_NON_PAUSE(bp, pri_join_mask)) { + cos_data->data[0].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI( + BNX2X_DCBX_STRICT_COS_HIGHEST); + } else { + cos_data->data[0].strict = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI( + BNX2X_DCBX_STRICT_COS_HIGHEST); + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + /* Pauseable */ + cos_data->data[0].pausable = true; + /* Non pause-able.*/ + cos_data->data[1].pausable = false; + } else { + /* If there are only pauseable priorities or + * only non-pauseable,* the lower priorities go + * to the first queue and the higher priorities go + * to the second queue. + */ + cos_data->data[0].pausable = + cos_data->data[1].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + + for (i = 0 ; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) { + pri_tested = 1 << bp->dcbx_port_params. + app.traffic_type_priority[i]; + /* Remove priority tested */ + pri_mask_without_pri = + (pri_join_mask & ((u8)(~pri_tested))); + if (pri_mask_without_pri < pri_tested) + break; + } + + if (i == LLFC_DRIVER_TRAFFIC_TYPE_MAX) + BNX2X_ERR("Invalid value for pri_join_mask - could not find a priority\n"); + + cos_data->data[0].pri_join_mask = pri_mask_without_pri; + cos_data->data[1].pri_join_mask = pri_tested; + /* Both queues are strict priority, + * and that with the highest priority + * gets the highest strict priority in the arbiter. + */ + cos_data->data[0].strict = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI( + BNX2X_DCBX_STRICT_COS_HIGHEST); + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + } +} + +static void bnx2x_dcbx_2cos_limit_cee_two_pg_to_cos_params( + struct bnx2x *bp, + struct pg_help_data *pg_help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + u8 i = 0; + u8 pg[DCBX_COS_MAX_NUM_E2] = { 0 }; + + /* If there are both pauseable and non-pauseable priorities, + * the pauseable priorities go to the first queue and + * the non-pauseable priorities go to the second queue. + */ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) { + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, + pg_help_data->data[0].pg_priority) || + IS_DCBX_PFC_PRI_MIX_PAUSE(bp, + pg_help_data->data[1].pg_priority)) { + /* If one PG contains both pauseable and + * non-pauseable priorities then ETS is disabled. + */ + bnx2x_dcbx_separate_pauseable_from_non(bp, cos_data, + pg_pri_orginal_spread, ets); + bp->dcbx_port_params.ets.enabled = false; + return; + } + + /* Pauseable */ + cos_data->data[0].pausable = true; + /* Non pauseable. */ + cos_data->data[1].pausable = false; + if (IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, + pg_help_data->data[0].pg_priority)) { + /* 0 is pauseable */ + cos_data->data[0].pri_join_mask = + pg_help_data->data[0].pg_priority; + pg[0] = pg_help_data->data[0].pg; + cos_data->data[1].pri_join_mask = + pg_help_data->data[1].pg_priority; + pg[1] = pg_help_data->data[1].pg; + } else {/* 1 is pauseable */ + cos_data->data[0].pri_join_mask = + pg_help_data->data[1].pg_priority; + pg[0] = pg_help_data->data[1].pg; + cos_data->data[1].pri_join_mask = + pg_help_data->data[0].pg_priority; + pg[1] = pg_help_data->data[0].pg; + } + } else { + /* If there are only pauseable priorities or + * only non-pauseable, each PG goes to a queue. + */ + cos_data->data[0].pausable = cos_data->data[1].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + cos_data->data[0].pri_join_mask = + pg_help_data->data[0].pg_priority; + pg[0] = pg_help_data->data[0].pg; + cos_data->data[1].pri_join_mask = + pg_help_data->data[1].pg_priority; + pg[1] = pg_help_data->data[1].pg; + } + + /* There can be only one strict pg */ + for (i = 0 ; i < ARRAY_SIZE(pg); i++) { + if (pg[i] < DCBX_MAX_NUM_PG_BW_ENTRIES) + cos_data->data[i].cos_bw = + DCBX_PG_BW_GET(ets->pg_bw_tbl, pg[i]); + else + cos_data->data[i].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } +} + +static int bnx2x_dcbx_join_pgs( + struct bnx2x *bp, + struct dcbx_ets_feature *ets, + struct pg_help_data *pg_help_data, + u8 required_num_of_pg) +{ + u8 entry_joined = pg_help_data->num_of_pg - 1; + u8 entry_removed = entry_joined + 1; + u8 pg_joined = 0; + + if (required_num_of_pg == 0 || ARRAY_SIZE(pg_help_data->data) + <= pg_help_data->num_of_pg) { + + BNX2X_ERR("required_num_of_pg can't be zero\n"); + return -EINVAL; + } + + while (required_num_of_pg < pg_help_data->num_of_pg) { + entry_joined = pg_help_data->num_of_pg - 2; + entry_removed = entry_joined + 1; + /* protect index */ + entry_removed %= ARRAY_SIZE(pg_help_data->data); + + pg_help_data->data[entry_joined].pg_priority |= + pg_help_data->data[entry_removed].pg_priority; + + pg_help_data->data[entry_joined].num_of_dif_pri += + pg_help_data->data[entry_removed].num_of_dif_pri; + + if (pg_help_data->data[entry_joined].pg == DCBX_STRICT_PRI_PG || + pg_help_data->data[entry_removed].pg == DCBX_STRICT_PRI_PG) + /* Entries joined strict priority rules */ + pg_help_data->data[entry_joined].pg = + DCBX_STRICT_PRI_PG; + else { + /* Entries can be joined join BW */ + pg_joined = DCBX_PG_BW_GET(ets->pg_bw_tbl, + pg_help_data->data[entry_joined].pg) + + DCBX_PG_BW_GET(ets->pg_bw_tbl, + pg_help_data->data[entry_removed].pg); + + DCBX_PG_BW_SET(ets->pg_bw_tbl, + pg_help_data->data[entry_joined].pg, pg_joined); + } + /* Joined the entries */ + pg_help_data->num_of_pg--; + } + + return 0; +} + +static void bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params( + struct bnx2x *bp, + struct pg_help_data *pg_help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + u8 i = 0; + u32 pri_tested = 0; + u8 entry = 0; + u8 pg_entry = 0; + bool b_found_strict = false; + u8 num_of_pri = LLFC_DRIVER_TRAFFIC_TYPE_MAX; + + cos_data->data[0].pri_join_mask = cos_data->data[1].pri_join_mask = 0; + /* If there are both pauseable and non-pauseable priorities, + * the pauseable priorities go to the first queue and the + * non-pauseable priorities go to the second queue. + */ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) + bnx2x_dcbx_separate_pauseable_from_non(bp, + cos_data, pg_pri_orginal_spread, ets); + else { + /* If two BW-limited PG-s were combined to one queue, + * the BW is their sum. + * + * If there are only pauseable priorities or only non-pauseable, + * and there are both BW-limited and non-BW-limited PG-s, + * the BW-limited PG/s go to one queue and the non-BW-limited + * PG/s go to the second queue. + * + * If there are only pauseable priorities or only non-pauseable + * and all are BW limited, then two priorities go to the first + * queue and one priority goes to the second queue. + * + * We will join this two cases: + * if one is BW limited it will go to the second queue + * otherwise the last priority will get it + */ + + cos_data->data[0].pausable = cos_data->data[1].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + + for (i = 0 ; i < num_of_pri; i++) { + pri_tested = 1 << bp->dcbx_port_params. + app.traffic_type_priority[i]; + pg_entry = (u8)pg_pri_orginal_spread[bp-> + dcbx_port_params.app.traffic_type_priority[i]]; + + if (pg_entry < DCBX_MAX_NUM_PG_BW_ENTRIES) { + entry = 0; + + if (i == (num_of_pri-1) && + false == b_found_strict) + /* last entry will be handled separately + * If no priority is strict than last + * entry goes to last queue. + */ + entry = 1; + cos_data->data[entry].pri_join_mask |= + pri_tested; + bnx2x_dcbx_add_to_cos_bw(bp, + &cos_data->data[entry], + DCBX_PG_BW_GET(ets->pg_bw_tbl, + pg_entry)); + } else { + b_found_strict = true; + cos_data->data[1].pri_join_mask |= pri_tested; + /* If we join a group and one is strict + * than the bw rules + */ + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + } + } +} + +static void bnx2x_dcbx_2cos_limit_cee_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + /* default E2 settings */ + cos_data->num_of_cos = DCBX_COS_MAX_NUM_E2; + + switch (help_data->num_of_pg) { + case 1: + bnx2x_dcbx_2cos_limit_cee_single_pg_to_cos_params( + bp, + help_data, + cos_data, + pri_join_mask, + num_of_dif_pri); + break; + case 2: + bnx2x_dcbx_2cos_limit_cee_two_pg_to_cos_params( + bp, + help_data, + ets, + cos_data, + pg_pri_orginal_spread, + pri_join_mask, + num_of_dif_pri); + break; + + case 3: + bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params( + bp, + help_data, + ets, + cos_data, + pg_pri_orginal_spread, + pri_join_mask, + num_of_dif_pri); + break; + default: + BNX2X_ERR("Wrong pg_help_data.num_of_pg\n"); + bnx2x_dcbx_ets_disabled_entry_data(bp, + cos_data, pri_join_mask); + } +} + +static int bnx2x_dcbx_spread_strict_pri(struct bnx2x *bp, + struct cos_help_data *cos_data, + u8 entry, + u8 num_spread_of_entries, + u8 strict_app_pris) +{ + u8 strict_pri = BNX2X_DCBX_STRICT_COS_HIGHEST; + u8 num_of_app_pri = MAX_PFC_PRIORITIES; + u8 app_pri_bit = 0; + + while (num_spread_of_entries && num_of_app_pri > 0) { + app_pri_bit = 1 << (num_of_app_pri - 1); + if (app_pri_bit & strict_app_pris) { + struct cos_entry_help_data *data = &cos_data-> + data[entry]; + num_spread_of_entries--; + if (num_spread_of_entries == 0) { + /* last entry needed put all the entries left */ + data->cos_bw = DCBX_INVALID_COS_BW; + data->strict = strict_pri; + data->pri_join_mask = strict_app_pris; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + } else { + strict_app_pris &= ~app_pri_bit; + + data->cos_bw = DCBX_INVALID_COS_BW; + data->strict = strict_pri; + data->pri_join_mask = app_pri_bit; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + } + + strict_pri = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI(strict_pri); + entry++; + } + + num_of_app_pri--; + } + + if (num_spread_of_entries) { + BNX2X_ERR("Didn't succeed to spread strict priorities\n"); + return -EINVAL; + } + + return 0; +} + +static u8 bnx2x_dcbx_cee_fill_strict_pri(struct bnx2x *bp, + struct cos_help_data *cos_data, + u8 entry, + u8 num_spread_of_entries, + u8 strict_app_pris) +{ + if (bnx2x_dcbx_spread_strict_pri(bp, cos_data, entry, + num_spread_of_entries, + strict_app_pris)) { + struct cos_entry_help_data *data = &cos_data-> + data[entry]; + /* Fill BW entry */ + data->cos_bw = DCBX_INVALID_COS_BW; + data->strict = BNX2X_DCBX_STRICT_COS_HIGHEST; + data->pri_join_mask = strict_app_pris; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + return 1; + } + + return num_spread_of_entries; +} + +static void bnx2x_dcbx_cee_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 pri_join_mask) + +{ + u8 need_num_of_entries = 0; + u8 i = 0; + u8 entry = 0; + + /* + * if the number of requested PG-s in CEE is greater than 3 + * then the results are not determined since this is a violation + * of the standard. + */ + if (help_data->num_of_pg > DCBX_COS_MAX_NUM_E3B0) { + if (bnx2x_dcbx_join_pgs(bp, ets, help_data, + DCBX_COS_MAX_NUM_E3B0)) { + BNX2X_ERR("Unable to reduce the number of PGs - we will disables ETS\n"); + bnx2x_dcbx_ets_disabled_entry_data(bp, cos_data, + pri_join_mask); + return; + } + } + + for (i = 0 ; i < help_data->num_of_pg; i++) { + struct pg_entry_help_data *pg = &help_data->data[i]; + if (pg->pg < DCBX_MAX_NUM_PG_BW_ENTRIES) { + struct cos_entry_help_data *data = &cos_data-> + data[entry]; + /* Fill BW entry */ + data->cos_bw = DCBX_PG_BW_GET(ets->pg_bw_tbl, pg->pg); + data->strict = BNX2X_DCBX_STRICT_INVALID; + data->pri_join_mask = pg->pg_priority; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + + entry++; + } else { + need_num_of_entries = min_t(u8, + (u8)pg->num_of_dif_pri, + (u8)DCBX_COS_MAX_NUM_E3B0 - + help_data->num_of_pg + 1); + /* + * If there are still VOQ-s which have no associated PG, + * then associate these VOQ-s to PG15. These PG-s will + * be used for SP between priorities on PG15. + */ + entry += bnx2x_dcbx_cee_fill_strict_pri(bp, cos_data, + entry, need_num_of_entries, pg->pg_priority); + } + } + + /* the entry will represent the number of COSes used */ + cos_data->num_of_cos = entry; +} +static void bnx2x_dcbx_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + u32 *pg_pri_orginal_spread) +{ + struct cos_help_data cos_data; + u8 i = 0; + u32 pri_join_mask = 0; + u8 num_of_dif_pri = 0; + + memset(&cos_data, 0, sizeof(cos_data)); + + /* Validate the pg value */ + for (i = 0; i < help_data->num_of_pg ; i++) { + if (DCBX_STRICT_PRIORITY != help_data->data[i].pg && + DCBX_MAX_NUM_PG_BW_ENTRIES <= help_data->data[i].pg) + BNX2X_ERR("Invalid pg[%d] data %x\n", i, + help_data->data[i].pg); + pri_join_mask |= help_data->data[i].pg_priority; + num_of_dif_pri += help_data->data[i].num_of_dif_pri; + } + + /* defaults */ + cos_data.num_of_cos = 1; + for (i = 0; i < ARRAY_SIZE(cos_data.data); i++) { + cos_data.data[i].pri_join_mask = 0; + cos_data.data[i].pausable = false; + cos_data.data[i].strict = BNX2X_DCBX_STRICT_INVALID; + cos_data.data[i].cos_bw = DCBX_INVALID_COS_BW; + } + + if (CHIP_IS_E3B0(bp)) + bnx2x_dcbx_cee_fill_cos_params(bp, help_data, ets, + &cos_data, pri_join_mask); + else /* E2 + E3A0 */ + bnx2x_dcbx_2cos_limit_cee_fill_cos_params(bp, + help_data, ets, + &cos_data, + pg_pri_orginal_spread, + pri_join_mask, + num_of_dif_pri); + + for (i = 0; i < cos_data.num_of_cos ; i++) { + struct bnx2x_dcbx_cos_params *p = + &bp->dcbx_port_params.ets.cos_params[i]; + + p->strict = cos_data.data[i].strict; + p->bw_tbl = cos_data.data[i].cos_bw; + p->pri_bitmask = cos_data.data[i].pri_join_mask; + p->pauseable = cos_data.data[i].pausable; + + /* sanity */ + if (p->bw_tbl != DCBX_INVALID_COS_BW || + p->strict != BNX2X_DCBX_STRICT_INVALID) { + if (p->pri_bitmask == 0) + BNX2X_ERR("Invalid pri_bitmask for %d\n", i); + + if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) { + + if (p->pauseable && + DCBX_PFC_PRI_GET_NON_PAUSE(bp, + p->pri_bitmask) != 0) + BNX2X_ERR("Inconsistent config for pausable COS %d\n", + i); + + if (!p->pauseable && + DCBX_PFC_PRI_GET_PAUSE(bp, + p->pri_bitmask) != 0) + BNX2X_ERR("Inconsistent config for nonpausable COS %d\n", + i); + } + } + + if (p->pauseable) + DP(BNX2X_MSG_DCB, "COS %d PAUSABLE prijoinmask 0x%x\n", + i, cos_data.data[i].pri_join_mask); + else + DP(BNX2X_MSG_DCB, + "COS %d NONPAUSABLE prijoinmask 0x%x\n", + i, cos_data.data[i].pri_join_mask); + } + + bp->dcbx_port_params.ets.num_of_cos = cos_data.num_of_cos ; +} + +static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp, + u32 *set_configuration_ets_pg, + u32 *pri_pg_tbl) +{ + int i; + + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) { + set_configuration_ets_pg[i] = DCBX_PRI_PG_GET(pri_pg_tbl, i); + + DP(BNX2X_MSG_DCB, "set_configuration_ets_pg[%d] = 0x%x\n", + i, set_configuration_ets_pg[i]); + } +} + +static void bnx2x_dcbx_fw_struct(struct bnx2x *bp, + struct bnx2x_func_tx_start_params *pfc_fw_cfg) +{ + u16 pri_bit = 0; + u8 cos = 0, pri = 0; + struct priority_cos *tt2cos; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + int mfw_configured = SHMEM2_HAS(bp, drv_flags) && + GET_FLAGS(SHMEM2_RD(bp, drv_flags), + 1 << DRV_FLAGS_DCB_MFW_CONFIGURED); + + memset(pfc_fw_cfg, 0, sizeof(*pfc_fw_cfg)); + + /* to disable DCB - the structure must be zeroed */ + if ((bp->dcbx_error & DCBX_REMOTE_MIB_ERROR) && !mfw_configured) + return; + + /*shortcut*/ + tt2cos = pfc_fw_cfg->traffic_type_to_priority_cos; + + /* Fw version should be incremented each update */ + pfc_fw_cfg->dcb_version = ++bp->dcb_version; + pfc_fw_cfg->dcb_enabled = 1; + + /* Fill priority parameters */ + for (pri = 0; pri < LLFC_DRIVER_TRAFFIC_TYPE_MAX; pri++) { + tt2cos[pri].priority = ttp[pri]; + pri_bit = 1 << tt2cos[pri].priority; + + /* Fill COS parameters based on COS calculated to + * make it more general for future use */ + for (cos = 0; cos < bp->dcbx_port_params.ets.num_of_cos; cos++) + if (bp->dcbx_port_params.ets.cos_params[cos]. + pri_bitmask & pri_bit) + tt2cos[pri].cos = cos; + + pfc_fw_cfg->dcb_outer_pri[pri] = ttp[pri]; + } + + /* we never want the FW to add a 0 vlan tag */ + pfc_fw_cfg->dont_add_pri_0_en = 1; + + bnx2x_dcbx_print_cos_params(bp, pfc_fw_cfg); +} + +void bnx2x_dcbx_pmf_update(struct bnx2x *bp) +{ + /* if we need to synchronize DCBX result from prev PMF + * read it from shmem and update bp and netdev accordingly + */ + if (SHMEM2_HAS(bp, drv_flags) && + GET_FLAGS(SHMEM2_RD(bp, drv_flags), 1 << DRV_FLAGS_DCB_CONFIGURED)) { + /* Read neg results if dcbx is in the FW */ + if (bnx2x_dcbx_read_shmem_neg_results(bp)) + return; + + bnx2x_dump_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + bnx2x_get_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); +#ifdef BCM_DCBNL + /* + * Add new app tlvs to dcbnl + */ + bnx2x_dcbnl_update_applist(bp, false); + /* + * Send a notification for the new negotiated parameters + */ + dcbnl_cee_notify(bp->dev, RTM_GETDCB, DCB_CMD_CEE_GET, 0, 0); +#endif + /* + * reconfigure the netdevice with the results of the new + * dcbx negotiation. + */ + bnx2x_dcbx_update_tc_mapping(bp); + } +} + +/* DCB netlink */ +#ifdef BCM_DCBNL + +#define BNX2X_DCBX_CAPS (DCB_CAP_DCBX_LLD_MANAGED | \ + DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_STATIC) + +static inline bool bnx2x_dcbnl_set_valid(struct bnx2x *bp) +{ + /* validate dcbnl call that may change HW state: + * DCB is on and DCBX mode was SUCCESSFULLY set by the user. + */ + return bp->dcb_state && bp->dcbx_mode_uset; +} + +static u8 bnx2x_dcbnl_get_state(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcb_state); + return bp->dcb_state; +} + +static u8 bnx2x_dcbnl_set_state(struct net_device *netdev, u8 state) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "state = %s\n", state ? "on" : "off"); + + /* Fail to set state to "enabled" if dcbx is disabled in nvram */ + if (state && ((bp->dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) || + (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_INVALID))) { + DP(BNX2X_MSG_DCB, "Can not set dcbx to enabled while it is disabled in nvm\n"); + return 1; + } + + bnx2x_dcbx_set_state(bp, (state ? true : false), bp->dcbx_enabled); + return 0; +} + +static void bnx2x_dcbnl_get_perm_hw_addr(struct net_device *netdev, + u8 *perm_addr) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "GET-PERM-ADDR\n"); + + /* first the HW mac address */ + memcpy(perm_addr, netdev->dev_addr, netdev->addr_len); + + if (CNIC_LOADED(bp)) + /* second SAN address */ + memcpy(perm_addr+netdev->addr_len, bp->fip_mac, + netdev->addr_len); +} + +static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio, + u8 prio_type, u8 pgid, u8 bw_pct, + u8 up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + + DP(BNX2X_MSG_DCB, "prio[%d] = %d\n", prio, pgid); + if (!bnx2x_dcbnl_set_valid(bp) || prio >= DCBX_MAX_NUM_PRI_PG_ENTRIES) + return; + + /** + * bw_pct ignored - band-width percentage devision between user + * priorities within the same group is not + * standard and hence not supported + * + * prio_type ignored - priority levels within the same group are not + * standard and hence are not supported. According + * to the standard pgid 15 is dedicated to strict + * priority traffic (on the port level). + * + * up_map ignored + */ + + bp->dcbx_config_params.admin_configuration_ets_pg[prio] = pgid; + bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1; +} + +static void bnx2x_dcbnl_set_pg_bwgcfg_tx(struct net_device *netdev, + int pgid, u8 bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "pgid[%d] = %d\n", pgid, bw_pct); + + if (!bnx2x_dcbnl_set_valid(bp) || pgid >= DCBX_MAX_NUM_PG_BW_ENTRIES) + return; + + bp->dcbx_config_params.admin_configuration_bw_precentage[pgid] = bw_pct; + bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1; +} + +static void bnx2x_dcbnl_set_pg_tccfg_rx(struct net_device *netdev, int prio, + u8 prio_type, u8 pgid, u8 bw_pct, + u8 up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "Nothing to set; No RX support\n"); +} + +static void bnx2x_dcbnl_set_pg_bwgcfg_rx(struct net_device *netdev, + int pgid, u8 bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "Nothing to set; No RX support\n"); +} + +static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio, + u8 *prio_type, u8 *pgid, u8 *bw_pct, + u8 *up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "prio = %d\n", prio); + + /** + * bw_pct ignored - band-width percentage devision between user + * priorities within the same group is not + * standard and hence not supported + * + * prio_type ignored - priority levels within the same group are not + * standard and hence are not supported. According + * to the standard pgid 15 is dedicated to strict + * priority traffic (on the port level). + * + * up_map ignored + */ + *up_map = *bw_pct = *prio_type = *pgid = 0; + + if (!bp->dcb_state || prio >= DCBX_MAX_NUM_PRI_PG_ENTRIES) + return; + + *pgid = DCBX_PRI_PG_GET(bp->dcbx_local_feat.ets.pri_pg_tbl, prio); +} + +static void bnx2x_dcbnl_get_pg_bwgcfg_tx(struct net_device *netdev, + int pgid, u8 *bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "pgid = %d\n", pgid); + + *bw_pct = 0; + + if (!bp->dcb_state || pgid >= DCBX_MAX_NUM_PG_BW_ENTRIES) + return; + + *bw_pct = DCBX_PG_BW_GET(bp->dcbx_local_feat.ets.pg_bw_tbl, pgid); +} + +static void bnx2x_dcbnl_get_pg_tccfg_rx(struct net_device *netdev, int prio, + u8 *prio_type, u8 *pgid, u8 *bw_pct, + u8 *up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "Nothing to get; No RX support\n"); + + *prio_type = *pgid = *bw_pct = *up_map = 0; +} + +static void bnx2x_dcbnl_get_pg_bwgcfg_rx(struct net_device *netdev, + int pgid, u8 *bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "Nothing to get; No RX support\n"); + + *bw_pct = 0; +} + +static void bnx2x_dcbnl_set_pfc_cfg(struct net_device *netdev, int prio, + u8 setting) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "prio[%d] = %d\n", prio, setting); + + if (!bnx2x_dcbnl_set_valid(bp) || prio >= MAX_PFC_PRIORITIES) + return; + + if (setting) { + bp->dcbx_config_params.admin_pfc_bitmap |= (1 << prio); + bp->dcbx_config_params.admin_pfc_tx_enable = 1; + } else { + bp->dcbx_config_params.admin_pfc_bitmap &= ~(1 << prio); + } +} + +static void bnx2x_dcbnl_get_pfc_cfg(struct net_device *netdev, int prio, + u8 *setting) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "prio = %d\n", prio); + + *setting = 0; + + if (!bp->dcb_state || prio >= MAX_PFC_PRIORITIES) + return; + + *setting = (bp->dcbx_local_feat.pfc.pri_en_bitmap >> prio) & 0x1; +} + +static u8 bnx2x_dcbnl_set_all(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + + DP(BNX2X_MSG_DCB, "SET-ALL\n"); + + if (!bnx2x_dcbnl_set_valid(bp)) + return 1; + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + netdev_err(bp->dev, + "Handling parity error recovery. Try again later\n"); + return 1; + } + if (netif_running(bp->dev)) { + bnx2x_update_drv_flags(bp, + 1 << DRV_FLAGS_DCB_MFW_CONFIGURED, + 1); + bnx2x_dcbx_init(bp, true); + } + DP(BNX2X_MSG_DCB, "set_dcbx_params done\n"); + + return 0; +} + +static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + if (bp->dcb_state) { + switch (capid) { + case DCB_CAP_ATTR_PG: + *cap = true; + break; + case DCB_CAP_ATTR_PFC: + *cap = true; + break; + case DCB_CAP_ATTR_UP2TC: + *cap = false; + break; + case DCB_CAP_ATTR_PG_TCS: + *cap = 0x80; /* 8 priorities for PGs */ + break; + case DCB_CAP_ATTR_PFC_TCS: + *cap = 0x80; /* 8 priorities for PFC */ + break; + case DCB_CAP_ATTR_GSP: + *cap = true; + break; + case DCB_CAP_ATTR_BCN: + *cap = false; + break; + case DCB_CAP_ATTR_DCBX: + *cap = BNX2X_DCBX_CAPS; + break; + default: + BNX2X_ERR("Non valid capability ID\n"); + rval = 1; + break; + } + } else { + DP(BNX2X_MSG_DCB, "DCB disabled\n"); + rval = 1; + } + + DP(BNX2X_MSG_DCB, "capid %d:%x\n", capid, *cap); + return rval; +} + +static int bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + DP(BNX2X_MSG_DCB, "tcid %d\n", tcid); + + if (bp->dcb_state) { + switch (tcid) { + case DCB_NUMTCS_ATTR_PG: + *num = CHIP_IS_E3B0(bp) ? DCBX_COS_MAX_NUM_E3B0 : + DCBX_COS_MAX_NUM_E2; + break; + case DCB_NUMTCS_ATTR_PFC: + *num = CHIP_IS_E3B0(bp) ? DCBX_COS_MAX_NUM_E3B0 : + DCBX_COS_MAX_NUM_E2; + break; + default: + BNX2X_ERR("Non valid TC-ID\n"); + rval = 1; + break; + } + } else { + DP(BNX2X_MSG_DCB, "DCB disabled\n"); + rval = 1; + } + + return rval; +} + +static int bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "num tcs = %d; Not supported\n", num); + return -EINVAL; +} + +static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcbx_local_feat.pfc.enabled); + + if (!bp->dcb_state) + return 0; + + return bp->dcbx_local_feat.pfc.enabled; +} + +static void bnx2x_dcbnl_set_pfc_state(struct net_device *netdev, u8 state) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "state = %s\n", state ? "on" : "off"); + + if (!bnx2x_dcbnl_set_valid(bp)) + return; + + bp->dcbx_config_params.admin_pfc_tx_enable = + bp->dcbx_config_params.admin_pfc_enable = (state ? 1 : 0); +} + +static void bnx2x_admin_app_set_ent( + struct bnx2x_admin_priority_app_table *app_ent, + u8 idtype, u16 idval, u8 up) +{ + app_ent->valid = 1; + + switch (idtype) { + case DCB_APP_IDTYPE_ETHTYPE: + app_ent->traffic_type = TRAFFIC_TYPE_ETH; + break; + case DCB_APP_IDTYPE_PORTNUM: + app_ent->traffic_type = TRAFFIC_TYPE_PORT; + break; + default: + break; /* never gets here */ + } + app_ent->app_id = idval; + app_ent->priority = up; +} + +static bool bnx2x_admin_app_is_equal( + struct bnx2x_admin_priority_app_table *app_ent, + u8 idtype, u16 idval) +{ + if (!app_ent->valid) + return false; + + switch (idtype) { + case DCB_APP_IDTYPE_ETHTYPE: + if (app_ent->traffic_type != TRAFFIC_TYPE_ETH) + return false; + break; + case DCB_APP_IDTYPE_PORTNUM: + if (app_ent->traffic_type != TRAFFIC_TYPE_PORT) + return false; + break; + default: + return false; + } + if (app_ent->app_id != idval) + return false; + + return true; +} + +static int bnx2x_set_admin_app_up(struct bnx2x *bp, u8 idtype, u16 idval, u8 up) +{ + int i, ff; + + /* iterate over the app entries looking for idtype and idval */ + for (i = 0, ff = -1; i < DCBX_CONFIG_MAX_APP_PROTOCOL; i++) { + struct bnx2x_admin_priority_app_table *app_ent = + &bp->dcbx_config_params.admin_priority_app_table[i]; + if (bnx2x_admin_app_is_equal(app_ent, idtype, idval)) + break; + + if (ff < 0 && !app_ent->valid) + ff = i; + } + if (i < DCBX_CONFIG_MAX_APP_PROTOCOL) + /* if found overwrite up */ + bp->dcbx_config_params. + admin_priority_app_table[i].priority = up; + else if (ff >= 0) + /* not found use first-free */ + bnx2x_admin_app_set_ent( + &bp->dcbx_config_params.admin_priority_app_table[ff], + idtype, idval, up); + else { + /* app table is full */ + BNX2X_ERR("Application table is too large\n"); + return -EBUSY; + } + + /* up configured, if not 0 make sure feature is enabled */ + if (up) + bp->dcbx_config_params.admin_application_priority_tx_enable = 1; + + return 0; +} + +static int bnx2x_dcbnl_set_app_up(struct net_device *netdev, u8 idtype, + u16 idval, u8 up) +{ + struct bnx2x *bp = netdev_priv(netdev); + + DP(BNX2X_MSG_DCB, "app_type %d, app_id %x, prio bitmap %d\n", + idtype, idval, up); + + if (!bnx2x_dcbnl_set_valid(bp)) { + DP(BNX2X_MSG_DCB, "dcbnl call not valid\n"); + return -EINVAL; + } + + /* verify idtype */ + switch (idtype) { + case DCB_APP_IDTYPE_ETHTYPE: + case DCB_APP_IDTYPE_PORTNUM: + break; + default: + DP(BNX2X_MSG_DCB, "Wrong ID type\n"); + return -EINVAL; + } + return bnx2x_set_admin_app_up(bp, idtype, idval, up); +} + +static u8 bnx2x_dcbnl_get_dcbx(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 state; + + state = DCB_CAP_DCBX_LLD_MANAGED | DCB_CAP_DCBX_VER_CEE; + + if (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_OFF) + state |= DCB_CAP_DCBX_STATIC; + + return state; +} + +static u8 bnx2x_dcbnl_set_dcbx(struct net_device *netdev, u8 state) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(BNX2X_MSG_DCB, "state = %02x\n", state); + + /* set dcbx mode */ + + if ((state & BNX2X_DCBX_CAPS) != state) { + BNX2X_ERR("Requested DCBX mode %x is beyond advertised capabilities\n", + state); + return 1; + } + + if (bp->dcb_state != BNX2X_DCB_STATE_ON) { + BNX2X_ERR("DCB turned off, DCBX configuration is invalid\n"); + return 1; + } + + if (state & DCB_CAP_DCBX_STATIC) + bp->dcbx_enabled = BNX2X_DCBX_ENABLED_ON_NEG_OFF; + else + bp->dcbx_enabled = BNX2X_DCBX_ENABLED_ON_NEG_ON; + + bp->dcbx_mode_uset = true; + return 0; +} + +static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid, + u8 *flags) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + DP(BNX2X_MSG_DCB, "featid %d\n", featid); + + if (bp->dcb_state) { + *flags = 0; + switch (featid) { + case DCB_FEATCFG_ATTR_PG: + if (bp->dcbx_local_feat.ets.enabled) + *flags |= DCB_FEATCFG_ENABLE; + if (bp->dcbx_error & (DCBX_LOCAL_ETS_ERROR | + DCBX_REMOTE_MIB_ERROR)) + *flags |= DCB_FEATCFG_ERROR; + break; + case DCB_FEATCFG_ATTR_PFC: + if (bp->dcbx_local_feat.pfc.enabled) + *flags |= DCB_FEATCFG_ENABLE; + if (bp->dcbx_error & (DCBX_LOCAL_PFC_ERROR | + DCBX_LOCAL_PFC_MISMATCH | + DCBX_REMOTE_MIB_ERROR)) + *flags |= DCB_FEATCFG_ERROR; + break; + case DCB_FEATCFG_ATTR_APP: + if (bp->dcbx_local_feat.app.enabled) + *flags |= DCB_FEATCFG_ENABLE; + if (bp->dcbx_error & (DCBX_LOCAL_APP_ERROR | + DCBX_LOCAL_APP_MISMATCH | + DCBX_REMOTE_MIB_ERROR)) + *flags |= DCB_FEATCFG_ERROR; + break; + default: + BNX2X_ERR("Non valid feature-ID\n"); + rval = 1; + break; + } + } else { + DP(BNX2X_MSG_DCB, "DCB disabled\n"); + rval = 1; + } + + return rval; +} + +static u8 bnx2x_dcbnl_set_featcfg(struct net_device *netdev, int featid, + u8 flags) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + DP(BNX2X_MSG_DCB, "featid = %d flags = %02x\n", featid, flags); + + /* ignore the 'advertise' flag */ + if (bnx2x_dcbnl_set_valid(bp)) { + switch (featid) { + case DCB_FEATCFG_ATTR_PG: + bp->dcbx_config_params.admin_ets_enable = + flags & DCB_FEATCFG_ENABLE ? 1 : 0; + bp->dcbx_config_params.admin_ets_willing = + flags & DCB_FEATCFG_WILLING ? 1 : 0; + break; + case DCB_FEATCFG_ATTR_PFC: + bp->dcbx_config_params.admin_pfc_enable = + flags & DCB_FEATCFG_ENABLE ? 1 : 0; + bp->dcbx_config_params.admin_pfc_willing = + flags & DCB_FEATCFG_WILLING ? 1 : 0; + break; + case DCB_FEATCFG_ATTR_APP: + /* ignore enable, always enabled */ + bp->dcbx_config_params.admin_app_priority_willing = + flags & DCB_FEATCFG_WILLING ? 1 : 0; + break; + default: + BNX2X_ERR("Non valid feature-ID\n"); + rval = 1; + break; + } + } else { + DP(BNX2X_MSG_DCB, "dcbnl call not valid\n"); + rval = 1; + } + + return rval; +} + +static int bnx2x_peer_appinfo(struct net_device *netdev, + struct dcb_peer_app_info *info, u16* app_count) +{ + int i; + struct bnx2x *bp = netdev_priv(netdev); + + DP(BNX2X_MSG_DCB, "APP-INFO\n"); + + info->willing = (bp->dcbx_remote_flags & DCBX_APP_REM_WILLING) ?: 0; + info->error = (bp->dcbx_remote_flags & DCBX_APP_RX_ERROR) ?: 0; + *app_count = 0; + + for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) + if (bp->dcbx_remote_feat.app.app_pri_tbl[i].appBitfield & + DCBX_APP_ENTRY_VALID) + (*app_count)++; + return 0; +} + +static int bnx2x_peer_apptable(struct net_device *netdev, + struct dcb_app *table) +{ + int i, j; + struct bnx2x *bp = netdev_priv(netdev); + + DP(BNX2X_MSG_DCB, "APP-TABLE\n"); + + for (i = 0, j = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { + struct dcbx_app_priority_entry *ent = + &bp->dcbx_remote_feat.app.app_pri_tbl[i]; + + if (ent->appBitfield & DCBX_APP_ENTRY_VALID) { + table[j].selector = bnx2x_dcbx_dcbnl_app_idtype(ent); + table[j].priority = bnx2x_dcbx_dcbnl_app_up(ent); + table[j++].protocol = ent->app_id; + } + } + return 0; +} + +static int bnx2x_cee_peer_getpg(struct net_device *netdev, struct cee_pg *pg) +{ + int i; + struct bnx2x *bp = netdev_priv(netdev); + + pg->willing = (bp->dcbx_remote_flags & DCBX_ETS_REM_WILLING) ?: 0; + + for (i = 0; i < CEE_DCBX_MAX_PGS; i++) { + pg->pg_bw[i] = + DCBX_PG_BW_GET(bp->dcbx_remote_feat.ets.pg_bw_tbl, i); + pg->prio_pg[i] = + DCBX_PRI_PG_GET(bp->dcbx_remote_feat.ets.pri_pg_tbl, i); + } + return 0; +} + +static int bnx2x_cee_peer_getpfc(struct net_device *netdev, + struct cee_pfc *pfc) +{ + struct bnx2x *bp = netdev_priv(netdev); + pfc->tcs_supported = bp->dcbx_remote_feat.pfc.pfc_caps; + pfc->pfc_en = bp->dcbx_remote_feat.pfc.pri_en_bitmap; + return 0; +} + +const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops = { + .getstate = bnx2x_dcbnl_get_state, + .setstate = bnx2x_dcbnl_set_state, + .getpermhwaddr = bnx2x_dcbnl_get_perm_hw_addr, + .setpgtccfgtx = bnx2x_dcbnl_set_pg_tccfg_tx, + .setpgbwgcfgtx = bnx2x_dcbnl_set_pg_bwgcfg_tx, + .setpgtccfgrx = bnx2x_dcbnl_set_pg_tccfg_rx, + .setpgbwgcfgrx = bnx2x_dcbnl_set_pg_bwgcfg_rx, + .getpgtccfgtx = bnx2x_dcbnl_get_pg_tccfg_tx, + .getpgbwgcfgtx = bnx2x_dcbnl_get_pg_bwgcfg_tx, + .getpgtccfgrx = bnx2x_dcbnl_get_pg_tccfg_rx, + .getpgbwgcfgrx = bnx2x_dcbnl_get_pg_bwgcfg_rx, + .setpfccfg = bnx2x_dcbnl_set_pfc_cfg, + .getpfccfg = bnx2x_dcbnl_get_pfc_cfg, + .setall = bnx2x_dcbnl_set_all, + .getcap = bnx2x_dcbnl_get_cap, + .getnumtcs = bnx2x_dcbnl_get_numtcs, + .setnumtcs = bnx2x_dcbnl_set_numtcs, + .getpfcstate = bnx2x_dcbnl_get_pfc_state, + .setpfcstate = bnx2x_dcbnl_set_pfc_state, + .setapp = bnx2x_dcbnl_set_app_up, + .getdcbx = bnx2x_dcbnl_get_dcbx, + .setdcbx = bnx2x_dcbnl_set_dcbx, + .getfeatcfg = bnx2x_dcbnl_get_featcfg, + .setfeatcfg = bnx2x_dcbnl_set_featcfg, + .peer_getappinfo = bnx2x_peer_appinfo, + .peer_getapptable = bnx2x_peer_apptable, + .cee_peer_getpg = bnx2x_cee_peer_getpg, + .cee_peer_getpfc = bnx2x_cee_peer_getpfc, +}; + +#endif /* BCM_DCBNL */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h new file mode 100644 index 000000000..9a9517c0f --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h @@ -0,0 +1,207 @@ +/* bnx2x_dcb.h: QLogic Everest network driver. + * + * Copyright 2009-2013 Broadcom Corporation + * Copyright 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other QLogic software provided under a + * license other than the GPL, without QLogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Dmitry Kravkov + * + */ +#ifndef BNX2X_DCB_H +#define BNX2X_DCB_H + +#include "bnx2x_hsi.h" + +#define LLFC_DRIVER_TRAFFIC_TYPE_MAX 3 /* NW, iSCSI, FCoE */ +struct bnx2x_dcbx_app_params { + u32 enabled; + u32 traffic_type_priority[LLFC_DRIVER_TRAFFIC_TYPE_MAX]; +}; + +#define DCBX_COS_MAX_NUM_E2 DCBX_E2E3_MAX_NUM_COS +/* bnx2x currently limits numbers of supported COSes to 3 to be extended to 6 */ +#define BNX2X_MAX_COS_SUPPORT 3 +#define DCBX_COS_MAX_NUM_E3B0 BNX2X_MAX_COS_SUPPORT +#define DCBX_COS_MAX_NUM BNX2X_MAX_COS_SUPPORT + +struct bnx2x_dcbx_cos_params { + u32 bw_tbl; + u32 pri_bitmask; + /* + * strict priority: valid values are 0..5; 0 is highest priority. + * There can't be two COSes with the same priority. + */ + u8 strict; +#define BNX2X_DCBX_STRICT_INVALID DCBX_COS_MAX_NUM +#define BNX2X_DCBX_STRICT_COS_HIGHEST 0 +#define BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI(sp) ((sp) + 1) + u8 pauseable; +}; + +struct bnx2x_dcbx_pg_params { + u32 enabled; + u8 num_of_cos; /* valid COS entries */ + struct bnx2x_dcbx_cos_params cos_params[DCBX_COS_MAX_NUM]; +}; + +struct bnx2x_dcbx_pfc_params { + u32 enabled; + u32 priority_non_pauseable_mask; +}; + +struct bnx2x_dcbx_port_params { + struct bnx2x_dcbx_pfc_params pfc; + struct bnx2x_dcbx_pg_params ets; + struct bnx2x_dcbx_app_params app; +}; + +#define BNX2X_DCBX_CONFIG_INV_VALUE (0xFFFFFFFF) +#define BNX2X_DCBX_OVERWRITE_SETTINGS_DISABLE 0 +#define BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE 1 +#define BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID (BNX2X_DCBX_CONFIG_INV_VALUE) +#define BNX2X_IS_ETS_ENABLED(bp) ((bp)->dcb_state == BNX2X_DCB_STATE_ON &&\ + (bp)->dcbx_port_params.ets.enabled) + +struct bnx2x_config_lldp_params { + u32 overwrite_settings; + u32 msg_tx_hold; + u32 msg_fast_tx; + u32 tx_credit_max; + u32 msg_tx_interval; + u32 tx_fast; +}; + +struct bnx2x_admin_priority_app_table { + u32 valid; + u32 priority; +#define INVALID_TRAFFIC_TYPE_PRIORITY (0xFFFFFFFF) + u32 traffic_type; +#define TRAFFIC_TYPE_ETH 0 +#define TRAFFIC_TYPE_PORT 1 + u32 app_id; +}; + +#define DCBX_CONFIG_MAX_APP_PROTOCOL 4 +struct bnx2x_config_dcbx_params { + u32 overwrite_settings; + u32 admin_dcbx_version; + u32 admin_ets_enable; + u32 admin_pfc_enable; + u32 admin_tc_supported_tx_enable; + u32 admin_ets_configuration_tx_enable; + u32 admin_ets_recommendation_tx_enable; + u32 admin_pfc_tx_enable; + u32 admin_application_priority_tx_enable; + u32 admin_ets_willing; + u32 admin_ets_reco_valid; + u32 admin_pfc_willing; + u32 admin_app_priority_willing; + u32 admin_configuration_bw_precentage[8]; + u32 admin_configuration_ets_pg[8]; + u32 admin_recommendation_bw_precentage[8]; + u32 admin_recommendation_ets_pg[8]; + u32 admin_pfc_bitmap; + struct bnx2x_admin_priority_app_table + admin_priority_app_table[DCBX_CONFIG_MAX_APP_PROTOCOL]; + u32 admin_default_priority; +}; + +#define GET_FLAGS(flags, bits) ((flags) & (bits)) +#define SET_FLAGS(flags, bits) ((flags) |= (bits)) +#define RESET_FLAGS(flags, bits) ((flags) &= ~(bits)) + +enum { + DCBX_READ_LOCAL_MIB, + DCBX_READ_REMOTE_MIB +}; + +#define ETH_TYPE_FCOE (0x8906) +#define TCP_PORT_ISCSI (0xCBC) + +#define PFC_VALUE_FRAME_SIZE (512) +#define PFC_QUANTA_IN_NANOSEC_FROM_SPEED_MEGA(mega_speed) \ + ((1000 * PFC_VALUE_FRAME_SIZE)/(mega_speed)) + +#define PFC_BRB1_REG_HIGH_LLFC_LOW_THRESHOLD 130 +#define PFC_BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD 170 + +struct cos_entry_help_data { + u32 pri_join_mask; + u32 cos_bw; + u8 strict; + bool pausable; +}; + +struct cos_help_data { + struct cos_entry_help_data data[DCBX_COS_MAX_NUM]; + u8 num_of_cos; +}; + +#define DCBX_ILLEGAL_PG (0xFF) +#define DCBX_PFC_PRI_MASK (0xFF) +#define DCBX_STRICT_PRIORITY (15) +#define DCBX_INVALID_COS_BW (0xFFFFFFFF) +#define DCBX_PFC_PRI_NON_PAUSE_MASK(bp) \ + ((bp)->dcbx_port_params.pfc.priority_non_pauseable_mask) +#define DCBX_PFC_PRI_PAUSE_MASK(bp) \ + ((u8)~DCBX_PFC_PRI_NON_PAUSE_MASK(bp)) +#define DCBX_PFC_PRI_GET_PAUSE(bp, pg_pri) \ + ((pg_pri) & (DCBX_PFC_PRI_PAUSE_MASK(bp))) +#define DCBX_PFC_PRI_GET_NON_PAUSE(bp, pg_pri) \ + (DCBX_PFC_PRI_NON_PAUSE_MASK(bp) & (pg_pri)) +#define DCBX_IS_PFC_PRI_SOME_PAUSE(bp, pg_pri) \ + (0 != DCBX_PFC_PRI_GET_PAUSE(bp, pg_pri)) +#define IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pg_pri) \ + (pg_pri == DCBX_PFC_PRI_GET_PAUSE((bp), (pg_pri))) +#define IS_DCBX_PFC_PRI_ONLY_NON_PAUSE(bp, pg_pri)\ + ((pg_pri) == DCBX_PFC_PRI_GET_NON_PAUSE((bp), (pg_pri))) +#define IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pg_pri) \ + (!(IS_DCBX_PFC_PRI_ONLY_NON_PAUSE((bp), (pg_pri)) || \ + IS_DCBX_PFC_PRI_ONLY_PAUSE((bp), (pg_pri)))) + +struct pg_entry_help_data { + u8 num_of_dif_pri; + u8 pg; + u32 pg_priority; +}; + +struct pg_help_data { + struct pg_entry_help_data data[LLFC_DRIVER_TRAFFIC_TYPE_MAX]; + u8 num_of_pg; +}; + +/* forward DCB/PFC related declarations */ +struct bnx2x; +void bnx2x_dcbx_update(struct work_struct *work); +void bnx2x_dcbx_init_params(struct bnx2x *bp); +void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled); + +enum { + BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1, + BNX2X_DCBX_STATE_TX_PAUSED, + BNX2X_DCBX_STATE_TX_RELEASED +}; + +void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state); +void bnx2x_dcbx_pmf_update(struct bnx2x *bp); +/* DCB netlink */ +#ifdef BCM_DCBNL +extern const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops; +int bnx2x_dcbnl_update_applist(struct bnx2x *bp, bool delall); +#endif /* BCM_DCBNL */ + +int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp); +int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp); + +#endif /* BNX2X_DCB_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h new file mode 100644 index 000000000..eccfa13b0 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h @@ -0,0 +1,2218 @@ +/* bnx2x_dump.h: QLogic Everest network driver. + * + * Copyright (c) 2012-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other QLogic software provided under a + * license other than the GPL, without QLogic's express prior written + * consent. + */ + +#ifndef BNX2X_DUMP_H +#define BNX2X_DUMP_H + +/* WaitP Definitions */ +#define DRV_DUMP_XSTORM_WAITP_ADDRESS 0x2b8a80 +#define DRV_DUMP_TSTORM_WAITP_ADDRESS 0x1b8a80 +#define DRV_DUMP_USTORM_WAITP_ADDRESS 0x338a80 +#define DRV_DUMP_CSTORM_WAITP_ADDRESS 0x238a80 + +/* Possible Chips */ +#define DUMP_CHIP_E1 1 +#define DUMP_CHIP_E1H 2 +#define DUMP_CHIP_E2 4 +#define DUMP_CHIP_E3A0 8 +#define DUMP_CHIP_E3B0 16 +#define DUMP_PATH_0 512 +#define DUMP_PATH_1 1024 +#define NUM_PRESETS 13 +#define NUM_CHIPS 5 + +struct dump_header { + u32 header_size; /* Size in DWORDs excluding this field */ + u32 version; + u32 preset; + u32 dump_meta_data; /* OR of CHIP and PATH. */ +}; + +#define BNX2X_DUMP_VERSION 0x61111111 +struct reg_addr { + u32 addr; + u32 size; + u32 chips; + u32 presets; +}; + +struct wreg_addr { + u32 addr; + u32 size; + u32 read_regs_count; + const u32 *read_regs; + u32 chips; + u32 presets; +}; + +#define PAGE_MODE_VALUES_E2 2 +#define PAGE_READ_REGS_E2 1 +#define PAGE_WRITE_REGS_E2 1 +static const u32 page_vals_e2[] = {0, 128}; +static const u32 page_write_regs_e2[] = {328476}; +static const struct reg_addr page_read_regs_e2[] = { + {0x58000, 4608, DUMP_CHIP_E2, 0x30} +}; + +#define PAGE_MODE_VALUES_E3 2 +#define PAGE_READ_REGS_E3 1 +#define PAGE_WRITE_REGS_E3 1 +static const u32 page_vals_e3[] = {0, 128}; +static const u32 page_write_regs_e3[] = {328476}; +static const struct reg_addr page_read_regs_e3[] = { + {0x58000, 4608, DUMP_CHIP_E3A0 | DUMP_CHIP_E3B0, 0x30} +}; + +static const struct reg_addr reg_addrs[] = { + { 0x2000, 1, 0x1f, 0xfff}, + { 0x2004, 1, 0x1f, 0x1fff}, + { 0x2008, 25, 0x1f, 0xfff}, + { 0x206c, 1, 0x1f, 0x1fff}, + { 0x2070, 313, 0x1f, 0xfff}, + { 0x2800, 103, 0x1f, 0xfff}, + { 0x3000, 287, 0x1f, 0xfff}, + { 0x3800, 331, 0x1f, 0xfff}, + { 0x8800, 6, 0x1f, 0x924}, + { 0x8818, 1, 0x1e, 0x924}, + { 0x9000, 4, 0x1c, 0x924}, + { 0x9010, 7, 0x1c, 0xfff}, + { 0x902c, 1, 0x1c, 0x924}, + { 0x9030, 1, 0x1c, 0xfff}, + { 0x9034, 13, 0x1c, 0x924}, + { 0x9068, 16, 0x1c, 0xfff}, + { 0x90a8, 98, 0x1c, 0x924}, + { 0x9230, 2, 0x1c, 0xfff}, + { 0x9238, 3, 0x1c, 0x924}, + { 0x9244, 1, 0x1c, 0xfff}, + { 0x9248, 1, 0x1c, 0x924}, + { 0x924c, 1, 0x4, 0x924}, + { 0x9250, 16, 0x1c, 0x924}, + { 0x92a8, 2, 0x1c, 0x1fff}, + { 0x92b4, 1, 0x1c, 0x1fff}, + { 0x9400, 33, 0x1c, 0x924}, + { 0x9484, 5, 0x18, 0x924}, + { 0xa000, 27, 0x1f, 0x924}, + { 0xa06c, 1, 0x3, 0x924}, + { 0xa070, 2, 0x1f, 0x924}, + { 0xa078, 1, 0x1f, 0x1fff}, + { 0xa07c, 31, 0x1f, 0x924}, + { 0xa0f8, 1, 0x1f, 0x1fff}, + { 0xa0fc, 3, 0x1f, 0x924}, + { 0xa108, 1, 0x1f, 0x1fff}, + { 0xa10c, 3, 0x1f, 0x924}, + { 0xa118, 1, 0x1f, 0x1fff}, + { 0xa11c, 28, 0x1f, 0x924}, + { 0xa18c, 4, 0x3, 0x924}, + { 0xa19c, 3, 0x1f, 0x924}, + { 0xa1a8, 1, 0x1f, 0x1fff}, + { 0xa1ac, 3, 0x1f, 0x924}, + { 0xa1b8, 1, 0x1f, 0x1fff}, + { 0xa1bc, 54, 0x1f, 0x924}, + { 0xa294, 2, 0x3, 0x924}, + { 0xa29c, 2, 0x1f, 0x924}, + { 0xa2a4, 2, 0x7, 0x924}, + { 0xa2ac, 2, 0x1f, 0x924}, + { 0xa2b4, 1, 0x1f, 0x1fff}, + { 0xa2b8, 49, 0x1f, 0x924}, + { 0xa38c, 2, 0x1f, 0x1fff}, + { 0xa398, 1, 0x1f, 0x1fff}, + { 0xa39c, 7, 0x1e, 0x924}, + { 0xa3b8, 2, 0x18, 0x924}, + { 0xa3c0, 1, 0x1e, 0x924}, + { 0xa3c4, 1, 0x1e, 0xfff}, + { 0xa3c8, 1, 0x1e, 0x924}, + { 0xa3d0, 1, 0x1e, 0x924}, + { 0xa3d8, 1, 0x1e, 0x924}, + { 0xa3e0, 1, 0x1e, 0x924}, + { 0xa3e8, 1, 0x1e, 0x924}, + { 0xa3f0, 1, 0x1e, 0x924}, + { 0xa3f8, 1, 0x1e, 0x924}, + { 0xa400, 1, 0x1f, 0x924}, + { 0xa404, 1, 0x1f, 0xfff}, + { 0xa408, 2, 0x1f, 0x1fff}, + { 0xa410, 7, 0x1f, 0x924}, + { 0xa42c, 12, 0x1f, 0xfff}, + { 0xa45c, 1, 0x1f, 0x924}, + { 0xa460, 1, 0x1f, 0x1924}, + { 0xa464, 15, 0x1f, 0x924}, + { 0xa4a0, 1, 0x7, 0x924}, + { 0xa4a4, 2, 0x1f, 0x924}, + { 0xa4ac, 2, 0x3, 0x924}, + { 0xa4b4, 1, 0x7, 0x924}, + { 0xa4b8, 2, 0x3, 0x924}, + { 0xa4c0, 3, 0x1f, 0x924}, + { 0xa4cc, 5, 0x3, 0x924}, + { 0xa4e0, 3, 0x1f, 0x924}, + { 0xa4fc, 2, 0x1f, 0x924}, + { 0xa504, 1, 0x3, 0x924}, + { 0xa508, 3, 0x1f, 0x924}, + { 0xa518, 1, 0x1f, 0x924}, + { 0xa520, 1, 0x1f, 0x924}, + { 0xa528, 1, 0x1f, 0x924}, + { 0xa530, 1, 0x1f, 0x924}, + { 0xa538, 1, 0x1f, 0x924}, + { 0xa540, 1, 0x1f, 0x924}, + { 0xa548, 1, 0x3, 0x924}, + { 0xa550, 1, 0x3, 0x924}, + { 0xa558, 1, 0x3, 0x924}, + { 0xa560, 1, 0x3, 0x924}, + { 0xa568, 1, 0x3, 0x924}, + { 0xa570, 1, 0x1f, 0x924}, + { 0xa580, 1, 0x1f, 0x1fff}, + { 0xa590, 1, 0x1f, 0x1fff}, + { 0xa5a0, 1, 0x7, 0x924}, + { 0xa5c0, 1, 0x1f, 0x924}, + { 0xa5e0, 1, 0x1e, 0x924}, + { 0xa5e8, 1, 0x1e, 0x924}, + { 0xa5f0, 1, 0x1e, 0x924}, + { 0xa5f8, 1, 0x6, 0x924}, + { 0xa5fc, 1, 0x1e, 0x924}, + { 0xa600, 5, 0x1e, 0xfff}, + { 0xa614, 1, 0x1e, 0x924}, + { 0xa618, 1, 0x1e, 0xfff}, + { 0xa61c, 1, 0x1e, 0x924}, + { 0xa620, 6, 0x1c, 0x924}, + { 0xa638, 20, 0x4, 0x924}, + { 0xa688, 35, 0x1c, 0x924}, + { 0xa714, 1, 0x1c, 0xfff}, + { 0xa718, 2, 0x1c, 0x924}, + { 0xa720, 1, 0x1c, 0xfff}, + { 0xa724, 3, 0x1c, 0x924}, + { 0xa730, 1, 0x4, 0x924}, + { 0xa734, 2, 0x1c, 0x924}, + { 0xa73c, 4, 0x4, 0x924}, + { 0xa74c, 1, 0x1c, 0x924}, + { 0xa750, 1, 0x1c, 0xfff}, + { 0xa754, 3, 0x1c, 0x924}, + { 0xa760, 5, 0x4, 0x924}, + { 0xa774, 7, 0x1c, 0x924}, + { 0xa790, 15, 0x4, 0x924}, + { 0xa7cc, 4, 0x1c, 0x924}, + { 0xa7e0, 6, 0x18, 0x924}, + { 0xa800, 18, 0x4, 0x924}, + { 0xa848, 33, 0x1c, 0x924}, + { 0xa8cc, 2, 0x18, 0x924}, + { 0xa8d4, 4, 0x1c, 0x924}, + { 0xa8e4, 1, 0x18, 0x924}, + { 0xa8e8, 1, 0x1c, 0x924}, + { 0xa8f0, 1, 0x1c, 0x924}, + { 0xa8f8, 30, 0x18, 0x924}, + { 0xa974, 73, 0x18, 0x924}, + { 0xac30, 1, 0x18, 0x924}, + { 0xac40, 1, 0x18, 0x924}, + { 0xac50, 1, 0x18, 0x924}, + { 0xac60, 1, 0x10, 0x924}, + { 0x10000, 9, 0x1f, 0x924}, + { 0x10024, 1, 0x7, 0x924}, + { 0x10028, 5, 0x1f, 0x924}, + { 0x1003c, 6, 0x7, 0x924}, + { 0x10054, 20, 0x1f, 0x924}, + { 0x100a4, 4, 0x7, 0x924}, + { 0x100b4, 11, 0x1f, 0x924}, + { 0x100e0, 4, 0x7, 0x924}, + { 0x100f0, 8, 0x1f, 0x924}, + { 0x10110, 6, 0x7, 0x924}, + { 0x10128, 110, 0x1f, 0x924}, + { 0x102e0, 4, 0x7, 0x924}, + { 0x102f0, 18, 0x1f, 0x924}, + { 0x10338, 20, 0x7, 0x924}, + { 0x10388, 10, 0x1f, 0x924}, + { 0x103d0, 2, 0x3, 0x1fff}, + { 0x103dc, 1, 0x3, 0x1fff}, + { 0x10400, 6, 0x7, 0x924}, + { 0x10418, 1, 0x1f, 0xfff}, + { 0x1041c, 1, 0x1f, 0x924}, + { 0x10420, 1, 0x1f, 0xfff}, + { 0x10424, 1, 0x1f, 0x924}, + { 0x10428, 1, 0x1f, 0xfff}, + { 0x1042c, 1, 0x1f, 0x924}, + { 0x10430, 10, 0x7, 0x924}, + { 0x10458, 2, 0x1f, 0x924}, + { 0x10460, 1, 0x1f, 0xfff}, + { 0x10464, 4, 0x1f, 0x924}, + { 0x10474, 1, 0x1f, 0xfff}, + { 0x10478, 14, 0x1f, 0x924}, + { 0x104b0, 12, 0x7, 0x924}, + { 0x104e0, 1, 0x1f, 0xfff}, + { 0x104e8, 1, 0x1f, 0x924}, + { 0x104ec, 1, 0x1f, 0xfff}, + { 0x104f4, 1, 0x1f, 0x924}, + { 0x104f8, 1, 0x1f, 0xfff}, + { 0x10500, 2, 0x1f, 0x924}, + { 0x10508, 1, 0x1f, 0xfff}, + { 0x1050c, 9, 0x1f, 0x924}, + { 0x10530, 1, 0x1f, 0xfff}, + { 0x10534, 1, 0x1f, 0x924}, + { 0x10538, 1, 0x1f, 0xfff}, + { 0x1053c, 3, 0x1f, 0x924}, + { 0x10548, 1, 0x1f, 0xfff}, + { 0x1054c, 3, 0x1f, 0x924}, + { 0x10558, 1, 0x1f, 0xfff}, + { 0x1055c, 123, 0x1f, 0x924}, + { 0x10750, 2, 0x7, 0x924}, + { 0x10760, 2, 0x7, 0x924}, + { 0x10770, 2, 0x7, 0x924}, + { 0x10780, 2, 0x7, 0x924}, + { 0x10790, 2, 0x1f, 0x924}, + { 0x107a0, 2, 0x7, 0x924}, + { 0x107b0, 2, 0x7, 0x924}, + { 0x107c0, 2, 0x7, 0x924}, + { 0x107d0, 2, 0x7, 0x924}, + { 0x107e0, 2, 0x1f, 0x924}, + { 0x10880, 2, 0x1f, 0x924}, + { 0x10900, 2, 0x1f, 0x924}, + { 0x16000, 1, 0x6, 0x924}, + { 0x16004, 25, 0x1e, 0x924}, + { 0x16070, 8, 0x1e, 0x924}, + { 0x16090, 4, 0xe, 0x924}, + { 0x160a0, 6, 0x1e, 0x924}, + { 0x160c0, 7, 0x1e, 0x924}, + { 0x160dc, 2, 0x6, 0x924}, + { 0x160e4, 6, 0x1e, 0x924}, + { 0x160fc, 4, 0x1e, 0x1fff}, + { 0x1610c, 2, 0x6, 0x924}, + { 0x16114, 6, 0x1e, 0x924}, + { 0x16140, 48, 0x1e, 0x1fff}, + { 0x16204, 5, 0x1e, 0x924}, + { 0x18000, 1, 0x1e, 0x924}, + { 0x18008, 1, 0x1e, 0x924}, + { 0x18010, 35, 0x1c, 0x924}, + { 0x180a4, 2, 0x1c, 0x924}, + { 0x180c0, 9, 0x1c, 0x924}, + { 0x180e4, 1, 0xc, 0x924}, + { 0x180e8, 2, 0x1c, 0x924}, + { 0x180f0, 1, 0xc, 0x924}, + { 0x180f4, 79, 0x1c, 0x924}, + { 0x18230, 1, 0xc, 0x924}, + { 0x18234, 2, 0x1c, 0x924}, + { 0x1823c, 1, 0xc, 0x924}, + { 0x18240, 13, 0x1c, 0x924}, + { 0x18274, 1, 0x4, 0x924}, + { 0x18278, 12, 0x1c, 0x924}, + { 0x182a8, 1, 0x1c, 0xfff}, + { 0x182ac, 3, 0x1c, 0x924}, + { 0x182b8, 1, 0x1c, 0xfff}, + { 0x182bc, 19, 0x1c, 0x924}, + { 0x18308, 1, 0x1c, 0xfff}, + { 0x1830c, 3, 0x1c, 0x924}, + { 0x18318, 1, 0x1c, 0xfff}, + { 0x1831c, 7, 0x1c, 0x924}, + { 0x18338, 1, 0x1c, 0xfff}, + { 0x1833c, 3, 0x1c, 0x924}, + { 0x18348, 1, 0x1c, 0xfff}, + { 0x1834c, 28, 0x1c, 0x924}, + { 0x183bc, 2, 0x1c, 0x1fff}, + { 0x183c8, 3, 0x1c, 0x1fff}, + { 0x183d8, 1, 0x1c, 0x1fff}, + { 0x18440, 48, 0x1c, 0x1fff}, + { 0x18500, 15, 0x1c, 0x924}, + { 0x18570, 1, 0x18, 0xfff}, + { 0x18574, 1, 0x18, 0x924}, + { 0x18578, 1, 0x18, 0xfff}, + { 0x1857c, 4, 0x18, 0x924}, + { 0x1858c, 1, 0x18, 0xfff}, + { 0x18590, 1, 0x18, 0x924}, + { 0x18594, 1, 0x18, 0xfff}, + { 0x18598, 32, 0x18, 0x924}, + { 0x18618, 5, 0x10, 0x924}, + { 0x1862c, 4, 0x10, 0xfff}, + { 0x1863c, 16, 0x10, 0x924}, + { 0x18680, 44, 0x10, 0x924}, + { 0x18748, 12, 0x10, 0x924}, + { 0x18788, 1, 0x10, 0x924}, + { 0x1879c, 6, 0x10, 0x924}, + { 0x187c4, 51, 0x10, 0x924}, + { 0x18a00, 48, 0x10, 0x924}, + { 0x20000, 24, 0x1f, 0x924}, + { 0x20060, 8, 0x1f, 0x9e4}, + { 0x20080, 94, 0x1f, 0x924}, + { 0x201f8, 1, 0x3, 0x924}, + { 0x201fc, 1, 0x1f, 0x924}, + { 0x20200, 1, 0x3, 0x924}, + { 0x20204, 1, 0x1f, 0x924}, + { 0x20208, 1, 0x3, 0x924}, + { 0x2020c, 4, 0x1f, 0x924}, + { 0x2021c, 11, 0x1f, 0xfff}, + { 0x20248, 24, 0x1f, 0x924}, + { 0x202b8, 2, 0x1f, 0x1fff}, + { 0x202c4, 1, 0x1f, 0x1fff}, + { 0x202c8, 1, 0x1c, 0x924}, + { 0x202d8, 4, 0x1c, 0x924}, + { 0x202f0, 1, 0x10, 0x924}, + { 0x20400, 1, 0x1f, 0x924}, + { 0x20404, 1, 0x1f, 0xfff}, + { 0x2040c, 2, 0x1f, 0xfff}, + { 0x20414, 2, 0x1f, 0x924}, + { 0x2041c, 2, 0x1f, 0xfff}, + { 0x20424, 2, 0x1f, 0x924}, + { 0x2042c, 18, 0x1e, 0x924}, + { 0x20480, 1, 0x1f, 0x924}, + { 0x20500, 1, 0x1f, 0x924}, + { 0x20600, 1, 0x1f, 0x924}, + { 0x28000, 1, 0x1f, 0x9e4}, + { 0x28004, 255, 0x1f, 0x180}, + { 0x28400, 1, 0x1f, 0x1c0}, + { 0x28404, 255, 0x1f, 0x180}, + { 0x28800, 1, 0x1f, 0x1c0}, + { 0x28804, 255, 0x1f, 0x180}, + { 0x28c00, 1, 0x1f, 0x1c0}, + { 0x28c04, 255, 0x1f, 0x180}, + { 0x29000, 1, 0x1f, 0x1c0}, + { 0x29004, 255, 0x1f, 0x180}, + { 0x29400, 1, 0x1f, 0x1c0}, + { 0x29404, 255, 0x1f, 0x180}, + { 0x29800, 1, 0x1f, 0x1c0}, + { 0x29804, 255, 0x1f, 0x180}, + { 0x29c00, 1, 0x1f, 0x1c0}, + { 0x29c04, 255, 0x1f, 0x180}, + { 0x2a000, 1, 0x1f, 0x1c0}, + { 0x2a004, 255, 0x1f, 0x180}, + { 0x2a400, 1, 0x1f, 0x1c0}, + { 0x2a404, 255, 0x1f, 0x180}, + { 0x2a800, 1, 0x1f, 0x1c0}, + { 0x2a804, 255, 0x1f, 0x180}, + { 0x2ac00, 1, 0x1f, 0x1c0}, + { 0x2ac04, 255, 0x1f, 0x180}, + { 0x2b000, 1, 0x1f, 0x1c0}, + { 0x2b004, 255, 0x1f, 0x180}, + { 0x2b400, 1, 0x1f, 0x1c0}, + { 0x2b404, 255, 0x1f, 0x180}, + { 0x2b800, 1, 0x1f, 0x1c0}, + { 0x2b804, 255, 0x1f, 0x180}, + { 0x2bc00, 1, 0x1f, 0x1c0}, + { 0x2bc04, 255, 0x1f, 0x180}, + { 0x2c000, 1, 0x1f, 0x1c0}, + { 0x2c004, 255, 0x1f, 0x180}, + { 0x2c400, 1, 0x1f, 0x1c0}, + { 0x2c404, 255, 0x1f, 0x180}, + { 0x2c800, 1, 0x1f, 0x1c0}, + { 0x2c804, 255, 0x1f, 0x180}, + { 0x2cc00, 1, 0x1f, 0x1c0}, + { 0x2cc04, 255, 0x1f, 0x180}, + { 0x2d000, 1, 0x1f, 0x1c0}, + { 0x2d004, 255, 0x1f, 0x180}, + { 0x2d400, 1, 0x1f, 0x1c0}, + { 0x2d404, 255, 0x1f, 0x180}, + { 0x2d800, 1, 0x1f, 0x1c0}, + { 0x2d804, 255, 0x1f, 0x180}, + { 0x2dc00, 1, 0x1f, 0x1c0}, + { 0x2dc04, 255, 0x1f, 0x180}, + { 0x2e000, 1, 0x1f, 0x1c0}, + { 0x2e004, 255, 0x1f, 0x180}, + { 0x2e400, 1, 0x1f, 0x1c0}, + { 0x2e404, 255, 0x1f, 0x180}, + { 0x2e800, 1, 0x1f, 0x1c0}, + { 0x2e804, 255, 0x1f, 0x180}, + { 0x2ec00, 1, 0x1f, 0x1c0}, + { 0x2ec04, 255, 0x1f, 0x180}, + { 0x2f000, 1, 0x1f, 0x1c0}, + { 0x2f004, 255, 0x1f, 0x180}, + { 0x2f400, 1, 0x1f, 0x1c0}, + { 0x2f404, 255, 0x1f, 0x180}, + { 0x2f800, 1, 0x1f, 0x1c0}, + { 0x2f804, 255, 0x1f, 0x180}, + { 0x2fc00, 1, 0x1f, 0x1c0}, + { 0x2fc04, 255, 0x1f, 0x180}, + { 0x30000, 1, 0x1f, 0x9e4}, + { 0x30004, 255, 0x1f, 0x180}, + { 0x30400, 1, 0x1f, 0x1c0}, + { 0x30404, 255, 0x1f, 0x180}, + { 0x30800, 1, 0x1f, 0x1c0}, + { 0x30804, 255, 0x1f, 0x180}, + { 0x30c00, 1, 0x1f, 0x1c0}, + { 0x30c04, 255, 0x1f, 0x180}, + { 0x31000, 1, 0x1f, 0x1c0}, + { 0x31004, 255, 0x1f, 0x180}, + { 0x31400, 1, 0x1f, 0x1c0}, + { 0x31404, 255, 0x1f, 0x180}, + { 0x31800, 1, 0x1f, 0x1c0}, + { 0x31804, 255, 0x1f, 0x180}, + { 0x31c00, 1, 0x1f, 0x1c0}, + { 0x31c04, 255, 0x1f, 0x180}, + { 0x32000, 1, 0x1f, 0x1c0}, + { 0x32004, 255, 0x1f, 0x180}, + { 0x32400, 1, 0x1f, 0x1c0}, + { 0x32404, 255, 0x1f, 0x180}, + { 0x32800, 1, 0x1f, 0x1c0}, + { 0x32804, 255, 0x1f, 0x180}, + { 0x32c00, 1, 0x1f, 0x1c0}, + { 0x32c04, 255, 0x1f, 0x180}, + { 0x33000, 1, 0x1f, 0x1c0}, + { 0x33004, 255, 0x1f, 0x180}, + { 0x33400, 1, 0x1f, 0x1c0}, + { 0x33404, 255, 0x1f, 0x180}, + { 0x33800, 1, 0x1f, 0x1c0}, + { 0x33804, 255, 0x1f, 0x180}, + { 0x33c00, 1, 0x1f, 0x1c0}, + { 0x33c04, 255, 0x1f, 0x180}, + { 0x34000, 1, 0x1f, 0x1c0}, + { 0x34004, 255, 0x1f, 0x180}, + { 0x34400, 1, 0x1f, 0x1c0}, + { 0x34404, 255, 0x1f, 0x180}, + { 0x34800, 1, 0x1f, 0x1c0}, + { 0x34804, 255, 0x1f, 0x180}, + { 0x34c00, 1, 0x1f, 0x1c0}, + { 0x34c04, 255, 0x1f, 0x180}, + { 0x35000, 1, 0x1f, 0x1c0}, + { 0x35004, 255, 0x1f, 0x180}, + { 0x35400, 1, 0x1f, 0x1c0}, + { 0x35404, 255, 0x1f, 0x180}, + { 0x35800, 1, 0x1f, 0x1c0}, + { 0x35804, 255, 0x1f, 0x180}, + { 0x35c00, 1, 0x1f, 0x1c0}, + { 0x35c04, 255, 0x1f, 0x180}, + { 0x36000, 1, 0x1f, 0x1c0}, + { 0x36004, 255, 0x1f, 0x180}, + { 0x36400, 1, 0x1f, 0x1c0}, + { 0x36404, 255, 0x1f, 0x180}, + { 0x36800, 1, 0x1f, 0x1c0}, + { 0x36804, 255, 0x1f, 0x180}, + { 0x36c00, 1, 0x1f, 0x1c0}, + { 0x36c04, 255, 0x1f, 0x180}, + { 0x37000, 1, 0x1f, 0x1c0}, + { 0x37004, 255, 0x1f, 0x180}, + { 0x37400, 1, 0x1f, 0x1c0}, + { 0x37404, 255, 0x1f, 0x180}, + { 0x37800, 1, 0x1f, 0x1c0}, + { 0x37804, 255, 0x1f, 0x180}, + { 0x37c00, 1, 0x1f, 0x1c0}, + { 0x37c04, 255, 0x1f, 0x180}, + { 0x38000, 1, 0x1f, 0x1c0}, + { 0x38004, 255, 0x1f, 0x180}, + { 0x38400, 1, 0x1f, 0x1c0}, + { 0x38404, 255, 0x1f, 0x180}, + { 0x38800, 1, 0x1f, 0x1c0}, + { 0x38804, 255, 0x1f, 0x180}, + { 0x38c00, 1, 0x1f, 0x1c0}, + { 0x38c04, 255, 0x1f, 0x180}, + { 0x39000, 1, 0x1f, 0x1c0}, + { 0x39004, 255, 0x1f, 0x180}, + { 0x39400, 1, 0x1f, 0x1c0}, + { 0x39404, 255, 0x1f, 0x180}, + { 0x39800, 1, 0x1f, 0x1c0}, + { 0x39804, 255, 0x1f, 0x180}, + { 0x39c00, 1, 0x1f, 0x1c0}, + { 0x39c04, 255, 0x1f, 0x180}, + { 0x3a000, 1, 0x1f, 0x1c0}, + { 0x3a004, 255, 0x1f, 0x180}, + { 0x3a400, 1, 0x1f, 0x1c0}, + { 0x3a404, 255, 0x1f, 0x180}, + { 0x3a800, 1, 0x1f, 0x1c0}, + { 0x3a804, 255, 0x1f, 0x180}, + { 0x3ac00, 1, 0x1f, 0x1c0}, + { 0x3ac04, 255, 0x1f, 0x180}, + { 0x3b000, 1, 0x1f, 0x1c0}, + { 0x3b004, 255, 0x1f, 0x180}, + { 0x3b400, 1, 0x1f, 0x1c0}, + { 0x3b404, 255, 0x1f, 0x180}, + { 0x3b800, 1, 0x1f, 0x1c0}, + { 0x3b804, 255, 0x1f, 0x180}, + { 0x3bc00, 1, 0x1f, 0x1c0}, + { 0x3bc04, 255, 0x1f, 0x180}, + { 0x3c000, 1, 0x1f, 0x1c0}, + { 0x3c004, 255, 0x1f, 0x180}, + { 0x3c400, 1, 0x1f, 0x1c0}, + { 0x3c404, 255, 0x1f, 0x180}, + { 0x3c800, 1, 0x1f, 0x1c0}, + { 0x3c804, 255, 0x1f, 0x180}, + { 0x3cc00, 1, 0x1f, 0x1c0}, + { 0x3cc04, 255, 0x1f, 0x180}, + { 0x3d000, 1, 0x1f, 0x1c0}, + { 0x3d004, 255, 0x1f, 0x180}, + { 0x3d400, 1, 0x1f, 0x1c0}, + { 0x3d404, 255, 0x1f, 0x180}, + { 0x3d800, 1, 0x1f, 0x1c0}, + { 0x3d804, 255, 0x1f, 0x180}, + { 0x3dc00, 1, 0x1f, 0x1c0}, + { 0x3dc04, 255, 0x1f, 0x180}, + { 0x3e000, 1, 0x1f, 0x1c0}, + { 0x3e004, 255, 0x1f, 0x180}, + { 0x3e400, 1, 0x1f, 0x1c0}, + { 0x3e404, 255, 0x1f, 0x180}, + { 0x3e800, 1, 0x1f, 0x1c0}, + { 0x3e804, 255, 0x1f, 0x180}, + { 0x3ec00, 1, 0x1f, 0x1c0}, + { 0x3ec04, 255, 0x1f, 0x180}, + { 0x3f000, 1, 0x1f, 0x1c0}, + { 0x3f004, 255, 0x1f, 0x180}, + { 0x3f400, 1, 0x1f, 0x1c0}, + { 0x3f404, 255, 0x1f, 0x180}, + { 0x3f800, 1, 0x1f, 0x1c0}, + { 0x3f804, 255, 0x1f, 0x180}, + { 0x3fc00, 1, 0x1f, 0x1c0}, + { 0x3fc04, 255, 0x1f, 0x180}, + { 0x40000, 85, 0x1f, 0x924}, + { 0x40154, 13, 0x1f, 0xfff}, + { 0x40198, 2, 0x1f, 0x1fff}, + { 0x401a4, 1, 0x1f, 0x1fff}, + { 0x401a8, 8, 0x1e, 0x924}, + { 0x401c8, 1, 0x2, 0x924}, + { 0x401cc, 2, 0x1e, 0x924}, + { 0x401d4, 2, 0x1c, 0x924}, + { 0x40200, 4, 0x1f, 0x924}, + { 0x40220, 6, 0x1c, 0x924}, + { 0x40238, 8, 0xc, 0x924}, + { 0x40258, 4, 0x1c, 0x924}, + { 0x40268, 2, 0x18, 0x924}, + { 0x40270, 17, 0x10, 0x924}, + { 0x40400, 43, 0x1f, 0x924}, + { 0x404bc, 2, 0x1f, 0x1fff}, + { 0x404c8, 1, 0x1f, 0x1fff}, + { 0x404cc, 3, 0x1e, 0x924}, + { 0x404e0, 1, 0x1c, 0x924}, + { 0x40500, 2, 0x1f, 0x924}, + { 0x40510, 2, 0x1f, 0x924}, + { 0x40520, 2, 0x1f, 0x924}, + { 0x40530, 2, 0x1f, 0x924}, + { 0x40540, 2, 0x1f, 0x924}, + { 0x40550, 10, 0x1c, 0x924}, + { 0x40610, 2, 0x1c, 0x924}, + { 0x42000, 164, 0x1f, 0x924}, + { 0x422b0, 2, 0x1f, 0x1fff}, + { 0x422bc, 1, 0x1f, 0x1fff}, + { 0x422c0, 4, 0x1c, 0x924}, + { 0x422d4, 5, 0x1e, 0x924}, + { 0x422e8, 1, 0x1c, 0x924}, + { 0x42400, 49, 0x1f, 0x924}, + { 0x424c8, 32, 0x1f, 0x924}, + { 0x42548, 1, 0x1f, 0xfff}, + { 0x4254c, 1, 0x1f, 0x924}, + { 0x42550, 1, 0x1f, 0xfff}, + { 0x42554, 1, 0x1f, 0x924}, + { 0x42558, 1, 0x1f, 0xfff}, + { 0x4255c, 1, 0x1f, 0x924}, + { 0x42568, 2, 0x1f, 0x924}, + { 0x42640, 5, 0x1c, 0x924}, + { 0x42800, 1, 0x1f, 0x924}, + { 0x50000, 1, 0x1f, 0x1fff}, + { 0x50004, 19, 0x1f, 0x924}, + { 0x50050, 8, 0x1f, 0x93c}, + { 0x50070, 60, 0x1f, 0x924}, + { 0x50160, 8, 0x1f, 0xfff}, + { 0x50180, 20, 0x1f, 0x924}, + { 0x501e0, 2, 0x1f, 0x1fff}, + { 0x501ec, 1, 0x1f, 0x1fff}, + { 0x501f0, 4, 0x1e, 0x924}, + { 0x50200, 1, 0x1f, 0x924}, + { 0x50204, 1, 0x1f, 0xfff}, + { 0x5020c, 2, 0x1f, 0xfff}, + { 0x50214, 2, 0x1f, 0x924}, + { 0x5021c, 1, 0x1f, 0xfff}, + { 0x50220, 2, 0x1f, 0x924}, + { 0x50228, 6, 0x1e, 0x924}, + { 0x50240, 1, 0x1f, 0x924}, + { 0x50280, 1, 0x1f, 0x924}, + { 0x50300, 1, 0x1c, 0x924}, + { 0x5030c, 1, 0x1c, 0x924}, + { 0x50318, 1, 0x1c, 0x934}, + { 0x5031c, 1, 0x1c, 0x924}, + { 0x50320, 2, 0x1c, 0x934}, + { 0x50330, 1, 0x10, 0x924}, + { 0x52000, 1, 0x1f, 0x924}, + { 0x54000, 1, 0x1f, 0x93c}, + { 0x54004, 255, 0x1f, 0x30}, + { 0x54400, 1, 0x1f, 0x38}, + { 0x54404, 255, 0x1f, 0x30}, + { 0x54800, 1, 0x1f, 0x38}, + { 0x54804, 255, 0x1f, 0x30}, + { 0x54c00, 1, 0x1f, 0x38}, + { 0x54c04, 255, 0x1f, 0x30}, + { 0x55000, 1, 0x1f, 0x38}, + { 0x55004, 255, 0x1f, 0x30}, + { 0x55400, 1, 0x1f, 0x38}, + { 0x55404, 255, 0x1f, 0x30}, + { 0x55800, 1, 0x1f, 0x38}, + { 0x55804, 255, 0x1f, 0x30}, + { 0x55c00, 1, 0x1f, 0x38}, + { 0x55c04, 255, 0x1f, 0x30}, + { 0x56000, 1, 0x1f, 0x38}, + { 0x56004, 255, 0x1f, 0x30}, + { 0x56400, 1, 0x1f, 0x38}, + { 0x56404, 255, 0x1f, 0x30}, + { 0x56800, 1, 0x1f, 0x38}, + { 0x56804, 255, 0x1f, 0x30}, + { 0x56c00, 1, 0x1f, 0x38}, + { 0x56c04, 255, 0x1f, 0x30}, + { 0x57000, 1, 0x1f, 0x38}, + { 0x57004, 255, 0x1f, 0x30}, + { 0x58000, 1, 0x1f, 0x934}, + { 0x58004, 8191, 0x3, 0x30}, + { 0x60000, 26, 0x1f, 0x924}, + { 0x60068, 8, 0x3, 0x924}, + { 0x60088, 2, 0x1f, 0x924}, + { 0x60090, 1, 0x1f, 0xfff}, + { 0x60094, 9, 0x1f, 0x924}, + { 0x600b8, 9, 0x3, 0x924}, + { 0x600dc, 1, 0x1f, 0x924}, + { 0x600e0, 5, 0x3, 0x924}, + { 0x600f4, 1, 0x7, 0x924}, + { 0x600f8, 1, 0x3, 0x924}, + { 0x600fc, 8, 0x1f, 0x924}, + { 0x6012c, 2, 0x1f, 0x1fff}, + { 0x60138, 1, 0x1f, 0x1fff}, + { 0x6013c, 24, 0x2, 0x924}, + { 0x6019c, 2, 0x1c, 0x924}, + { 0x601ac, 18, 0x1c, 0x924}, + { 0x60200, 1, 0x1f, 0xb6d}, + { 0x60204, 2, 0x1f, 0x249}, + { 0x60210, 13, 0x1c, 0x924}, + { 0x60244, 16, 0x10, 0x924}, + { 0x61000, 1, 0x1f, 0xb6d}, + { 0x61004, 511, 0x1f, 0x249}, + { 0x61800, 512, 0x18, 0x249}, + { 0x70000, 8, 0x1f, 0xb6d}, + { 0x70020, 8184, 0x1f, 0x249}, + { 0x78000, 8192, 0x18, 0x249}, + { 0x85000, 3, 0x1f, 0x1000}, + { 0x8501c, 7, 0x1f, 0x1000}, + { 0x85048, 1, 0x1f, 0x1000}, + { 0x85200, 32, 0x1f, 0x1000}, + { 0xa0000, 16384, 0x3, 0x1000}, + { 0xb0000, 16384, 0x2, 0x1000}, + { 0xc1000, 7, 0x1f, 0x924}, + { 0xc102c, 2, 0x1f, 0x1fff}, + { 0xc1038, 1, 0x1f, 0x1fff}, + { 0xc103c, 2, 0x1c, 0x924}, + { 0xc1800, 2, 0x1f, 0x924}, + { 0xc2000, 164, 0x1f, 0x924}, + { 0xc22b0, 2, 0x1f, 0x1fff}, + { 0xc22bc, 1, 0x1f, 0x1fff}, + { 0xc22c0, 5, 0x1c, 0x924}, + { 0xc22d8, 4, 0x1c, 0x924}, + { 0xc2400, 49, 0x1f, 0x924}, + { 0xc24c8, 32, 0x1f, 0x924}, + { 0xc2548, 1, 0x1f, 0xfff}, + { 0xc254c, 1, 0x1f, 0x924}, + { 0xc2550, 1, 0x1f, 0xfff}, + { 0xc2554, 1, 0x1f, 0x924}, + { 0xc2558, 1, 0x1f, 0xfff}, + { 0xc255c, 1, 0x1f, 0x924}, + { 0xc2568, 2, 0x1f, 0x924}, + { 0xc2600, 1, 0x1f, 0x924}, + { 0xc4000, 165, 0x1f, 0x924}, + { 0xc42b4, 2, 0x1f, 0x1fff}, + { 0xc42c0, 1, 0x1f, 0x1fff}, + { 0xc42d8, 2, 0x1c, 0x924}, + { 0xc42e0, 7, 0x1e, 0x924}, + { 0xc42fc, 1, 0x1c, 0x924}, + { 0xc4400, 51, 0x1f, 0x924}, + { 0xc44d0, 32, 0x1f, 0x924}, + { 0xc4550, 1, 0x1f, 0xfff}, + { 0xc4554, 1, 0x1f, 0x924}, + { 0xc4558, 1, 0x1f, 0xfff}, + { 0xc455c, 1, 0x1f, 0x924}, + { 0xc4560, 1, 0x1f, 0xfff}, + { 0xc4564, 1, 0x1f, 0x924}, + { 0xc4570, 2, 0x1f, 0x924}, + { 0xc4578, 5, 0x1c, 0x924}, + { 0xc4600, 1, 0x1f, 0x924}, + { 0xd0000, 19, 0x1f, 0x924}, + { 0xd004c, 8, 0x1f, 0x1927}, + { 0xd006c, 64, 0x1f, 0x924}, + { 0xd016c, 8, 0x1f, 0xfff}, + { 0xd018c, 19, 0x1f, 0x924}, + { 0xd01e8, 2, 0x1f, 0x1fff}, + { 0xd01f4, 1, 0x1f, 0x1fff}, + { 0xd01fc, 1, 0x1c, 0x924}, + { 0xd0200, 1, 0x1f, 0x924}, + { 0xd0204, 1, 0x1f, 0xfff}, + { 0xd020c, 3, 0x1f, 0xfff}, + { 0xd0218, 4, 0x1f, 0x924}, + { 0xd0228, 18, 0x1e, 0x924}, + { 0xd0280, 1, 0x1f, 0x924}, + { 0xd0300, 1, 0x1f, 0x924}, + { 0xd0400, 1, 0x1f, 0x924}, + { 0xd0818, 1, 0x10, 0x924}, + { 0xd4000, 1, 0x1f, 0x1927}, + { 0xd4004, 255, 0x1f, 0x6}, + { 0xd4400, 1, 0x1f, 0x1007}, + { 0xd4404, 255, 0x1f, 0x6}, + { 0xd4800, 1, 0x1f, 0x1007}, + { 0xd4804, 255, 0x1f, 0x6}, + { 0xd4c00, 1, 0x1f, 0x1007}, + { 0xd4c04, 255, 0x1f, 0x6}, + { 0xd5000, 1, 0x1f, 0x1007}, + { 0xd5004, 255, 0x1f, 0x6}, + { 0xd5400, 1, 0x1f, 0x1007}, + { 0xd5404, 255, 0x1f, 0x6}, + { 0xd5800, 1, 0x1f, 0x1007}, + { 0xd5804, 255, 0x1f, 0x6}, + { 0xd5c00, 1, 0x1f, 0x1007}, + { 0xd5c04, 255, 0x1f, 0x6}, + { 0xd6000, 1, 0x1f, 0x1007}, + { 0xd6004, 255, 0x1f, 0x6}, + { 0xd6400, 1, 0x1f, 0x1007}, + { 0xd6404, 255, 0x1f, 0x6}, + { 0xd8000, 1, 0x1f, 0x1927}, + { 0xd8004, 255, 0x1f, 0x6}, + { 0xd8400, 1, 0x1f, 0x1007}, + { 0xd8404, 255, 0x1f, 0x6}, + { 0xd8800, 1, 0x1f, 0x1007}, + { 0xd8804, 255, 0x1f, 0x6}, + { 0xd8c00, 1, 0x1f, 0x1007}, + { 0xd8c04, 255, 0x1f, 0x6}, + { 0xd9000, 1, 0x1f, 0x1007}, + { 0xd9004, 255, 0x1f, 0x6}, + { 0xd9400, 1, 0x1f, 0x1007}, + { 0xd9404, 255, 0x1f, 0x6}, + { 0xd9800, 1, 0x1f, 0x1007}, + { 0xd9804, 255, 0x1f, 0x6}, + { 0xd9c00, 1, 0x1f, 0x1007}, + { 0xd9c04, 255, 0x1f, 0x6}, + { 0xda000, 1, 0x1f, 0x1007}, + { 0xda004, 255, 0x1f, 0x6}, + { 0xda400, 1, 0x1f, 0x1007}, + { 0xda404, 255, 0x1f, 0x6}, + { 0xda800, 1, 0x1f, 0x1007}, + { 0xda804, 255, 0x1f, 0x6}, + { 0xdac00, 1, 0x1f, 0x1007}, + { 0xdac04, 255, 0x1f, 0x6}, + { 0xdb000, 1, 0x1f, 0x1007}, + { 0xdb004, 255, 0x1f, 0x6}, + { 0xdb400, 1, 0x1f, 0x1007}, + { 0xdb404, 255, 0x1f, 0x6}, + { 0xdb800, 1, 0x1f, 0x1007}, + { 0xdb804, 255, 0x1f, 0x6}, + { 0xdbc00, 1, 0x1f, 0x1007}, + { 0xdbc04, 255, 0x1f, 0x6}, + { 0xdc000, 1, 0x1f, 0x1007}, + { 0xdc004, 255, 0x1f, 0x6}, + { 0xdc400, 1, 0x1f, 0x1007}, + { 0xdc404, 255, 0x1f, 0x6}, + { 0xdc800, 1, 0x1f, 0x1007}, + { 0xdc804, 255, 0x1f, 0x6}, + { 0xdcc00, 1, 0x1f, 0x1007}, + { 0xdcc04, 255, 0x1f, 0x6}, + { 0xdd000, 1, 0x1f, 0x1007}, + { 0xdd004, 255, 0x1f, 0x6}, + { 0xdd400, 1, 0x1f, 0x1007}, + { 0xdd404, 255, 0x1f, 0x6}, + { 0xdd800, 1, 0x1f, 0x1007}, + { 0xdd804, 255, 0x1f, 0x6}, + { 0xddc00, 1, 0x1f, 0x1007}, + { 0xddc04, 255, 0x1f, 0x6}, + { 0xde000, 1, 0x1f, 0x1007}, + { 0xde004, 255, 0x1f, 0x6}, + { 0xde400, 1, 0x1f, 0x1007}, + { 0xde404, 255, 0x1f, 0x6}, + { 0xde800, 1, 0x1f, 0x1007}, + { 0xde804, 255, 0x1f, 0x6}, + { 0xdec00, 1, 0x1f, 0x1007}, + { 0xdec04, 255, 0x1f, 0x6}, + { 0xdf000, 1, 0x1f, 0x1007}, + { 0xdf004, 255, 0x1f, 0x6}, + { 0xdf400, 1, 0x1f, 0x1007}, + { 0xdf404, 255, 0x1f, 0x6}, + { 0xdf800, 1, 0x1f, 0x1007}, + { 0xdf804, 255, 0x1f, 0x6}, + { 0xdfc00, 1, 0x1f, 0x1007}, + { 0xdfc04, 255, 0x1f, 0x6}, + { 0xe0000, 21, 0x1f, 0x924}, + { 0xe0054, 8, 0x1f, 0xf24}, + { 0xe0074, 49, 0x1f, 0x924}, + { 0xe0138, 1, 0x3, 0x924}, + { 0xe013c, 6, 0x1f, 0x924}, + { 0xe0154, 8, 0x1f, 0xfff}, + { 0xe0174, 21, 0x1f, 0x924}, + { 0xe01d8, 2, 0x1f, 0x1fff}, + { 0xe01e4, 1, 0x1f, 0x1fff}, + { 0xe01f4, 1, 0x4, 0x924}, + { 0xe01f8, 1, 0x1c, 0x924}, + { 0xe0200, 1, 0x1f, 0x924}, + { 0xe0204, 1, 0x1f, 0xfff}, + { 0xe020c, 2, 0x1f, 0xfff}, + { 0xe0214, 2, 0x1f, 0x924}, + { 0xe021c, 2, 0x1f, 0xfff}, + { 0xe0224, 2, 0x1f, 0x924}, + { 0xe022c, 18, 0x1e, 0x924}, + { 0xe0280, 1, 0x1f, 0x924}, + { 0xe0300, 1, 0x1f, 0x924}, + { 0xe0400, 1, 0x10, 0x924}, + { 0xe1000, 1, 0x1f, 0x924}, + { 0xe2000, 1, 0x1f, 0xf24}, + { 0xe2004, 255, 0x1f, 0xc00}, + { 0xe2400, 1, 0x1f, 0xe00}, + { 0xe2404, 255, 0x1f, 0xc00}, + { 0xe2800, 1, 0x1f, 0xe00}, + { 0xe2804, 255, 0x1f, 0xc00}, + { 0xe2c00, 1, 0x1f, 0xe00}, + { 0xe2c04, 255, 0x1f, 0xc00}, + { 0xe3000, 1, 0x1f, 0xe00}, + { 0xe3004, 255, 0x1f, 0xc00}, + { 0xe3400, 1, 0x1f, 0xe00}, + { 0xe3404, 255, 0x1f, 0xc00}, + { 0xe3800, 1, 0x1f, 0xe00}, + { 0xe3804, 255, 0x1f, 0xc00}, + { 0xe3c00, 1, 0x1f, 0xe00}, + { 0xe3c04, 255, 0x1f, 0xc00}, + { 0xf0000, 1, 0x1f, 0xf24}, + { 0xf0004, 255, 0x1f, 0xc00}, + { 0xf0400, 1, 0x1f, 0xe00}, + { 0xf0404, 255, 0x1f, 0xc00}, + { 0xf0800, 1, 0x1f, 0xe00}, + { 0xf0804, 255, 0x1f, 0xc00}, + { 0xf0c00, 1, 0x1f, 0xe00}, + { 0xf0c04, 255, 0x1f, 0xc00}, + { 0xf1000, 1, 0x1f, 0xe00}, + { 0xf1004, 255, 0x1f, 0xc00}, + { 0xf1400, 1, 0x1f, 0xe00}, + { 0xf1404, 255, 0x1f, 0xc00}, + { 0xf1800, 1, 0x1f, 0xe00}, + { 0xf1804, 255, 0x1f, 0xc00}, + { 0xf1c00, 1, 0x1f, 0xe00}, + { 0xf1c04, 255, 0x1f, 0xc00}, + { 0xf2000, 1, 0x1f, 0xe00}, + { 0xf2004, 255, 0x1f, 0xc00}, + { 0xf2400, 1, 0x1f, 0xe00}, + { 0xf2404, 255, 0x1f, 0xc00}, + { 0xf2800, 1, 0x1f, 0xe00}, + { 0xf2804, 255, 0x1f, 0xc00}, + { 0xf2c00, 1, 0x1f, 0xe00}, + { 0xf2c04, 255, 0x1f, 0xc00}, + { 0xf3000, 1, 0x1f, 0xe00}, + { 0xf3004, 255, 0x1f, 0xc00}, + { 0xf3400, 1, 0x1f, 0xe00}, + { 0xf3404, 255, 0x1f, 0xc00}, + { 0xf3800, 1, 0x1f, 0xe00}, + { 0xf3804, 255, 0x1f, 0xc00}, + { 0xf3c00, 1, 0x1f, 0xe00}, + { 0xf3c04, 255, 0x1f, 0xc00}, + { 0xf4000, 1, 0x1f, 0xe00}, + { 0xf4004, 255, 0x1f, 0xc00}, + { 0xf4400, 1, 0x1f, 0xe00}, + { 0xf4404, 255, 0x1f, 0xc00}, + { 0xf4800, 1, 0x1f, 0xe00}, + { 0xf4804, 255, 0x1f, 0xc00}, + { 0xf4c00, 1, 0x1f, 0xe00}, + { 0xf4c04, 255, 0x1f, 0xc00}, + { 0xf5000, 1, 0x1f, 0xe00}, + { 0xf5004, 255, 0x1f, 0xc00}, + { 0xf5400, 1, 0x1f, 0xe00}, + { 0xf5404, 255, 0x1f, 0xc00}, + { 0xf5800, 1, 0x1f, 0xe00}, + { 0xf5804, 255, 0x1f, 0xc00}, + { 0xf5c00, 1, 0x1f, 0xe00}, + { 0xf5c04, 255, 0x1f, 0xc00}, + { 0xf6000, 1, 0x1f, 0xe00}, + { 0xf6004, 255, 0x1f, 0xc00}, + { 0xf6400, 1, 0x1f, 0xe00}, + { 0xf6404, 255, 0x1f, 0xc00}, + { 0xf6800, 1, 0x1f, 0xe00}, + { 0xf6804, 255, 0x1f, 0xc00}, + { 0xf6c00, 1, 0x1f, 0xe00}, + { 0xf6c04, 255, 0x1f, 0xc00}, + { 0xf7000, 1, 0x1f, 0xe00}, + { 0xf7004, 255, 0x1f, 0xc00}, + { 0xf7400, 1, 0x1f, 0xe00}, + { 0xf7404, 255, 0x1f, 0xc00}, + { 0xf7800, 1, 0x1f, 0xe00}, + { 0xf7804, 255, 0x1f, 0xc00}, + { 0xf7c00, 1, 0x1f, 0xe00}, + { 0xf7c04, 255, 0x1f, 0xc00}, + { 0xf8000, 1, 0x1f, 0xe00}, + { 0xf8004, 255, 0x1f, 0xc00}, + { 0xf8400, 1, 0x1f, 0xe00}, + { 0xf8404, 255, 0x1f, 0xc00}, + { 0xf8800, 1, 0x1f, 0xe00}, + { 0xf8804, 255, 0x1f, 0xc00}, + { 0xf8c00, 1, 0x1f, 0xe00}, + { 0xf8c04, 255, 0x1f, 0xc00}, + { 0xf9000, 1, 0x1f, 0xe00}, + { 0xf9004, 255, 0x1f, 0xc00}, + { 0xf9400, 1, 0x1f, 0xe00}, + { 0xf9404, 255, 0x1f, 0xc00}, + { 0xf9800, 1, 0x1f, 0xe00}, + { 0xf9804, 255, 0x1f, 0xc00}, + { 0xf9c00, 1, 0x1f, 0xe00}, + { 0xf9c04, 255, 0x1f, 0xc00}, + { 0xfa000, 1, 0x1f, 0xe00}, + { 0xfa004, 255, 0x1f, 0xc00}, + { 0xfa400, 1, 0x1f, 0xe00}, + { 0xfa404, 255, 0x1f, 0xc00}, + { 0xfa800, 1, 0x1f, 0xe00}, + { 0xfa804, 255, 0x1f, 0xc00}, + { 0xfac00, 1, 0x1f, 0xe00}, + { 0xfac04, 255, 0x1f, 0xc00}, + { 0xfb000, 1, 0x1f, 0xe00}, + { 0xfb004, 255, 0x1f, 0xc00}, + { 0xfb400, 1, 0x1f, 0xe00}, + { 0xfb404, 255, 0x1f, 0xc00}, + { 0xfb800, 1, 0x1f, 0xe00}, + { 0xfb804, 255, 0x1f, 0xc00}, + { 0xfbc00, 1, 0x1f, 0xe00}, + { 0xfbc04, 255, 0x1f, 0xc00}, + { 0xfc000, 1, 0x1f, 0xe00}, + { 0xfc004, 255, 0x1f, 0xc00}, + { 0xfc400, 1, 0x1f, 0xe00}, + { 0xfc404, 255, 0x1f, 0xc00}, + { 0xfc800, 1, 0x1f, 0xe00}, + { 0xfc804, 255, 0x1f, 0xc00}, + { 0xfcc00, 1, 0x1f, 0xe00}, + { 0xfcc04, 255, 0x1f, 0xc00}, + { 0xfd000, 1, 0x1f, 0xe00}, + { 0xfd004, 255, 0x1f, 0xc00}, + { 0xfd400, 1, 0x1f, 0xe00}, + { 0xfd404, 255, 0x1f, 0xc00}, + { 0xfd800, 1, 0x1f, 0xe00}, + { 0xfd804, 255, 0x1f, 0xc00}, + { 0xfdc00, 1, 0x1f, 0xe00}, + { 0xfdc04, 255, 0x1f, 0xc00}, + { 0xfe000, 1, 0x1f, 0xe00}, + { 0xfe004, 255, 0x1f, 0xc00}, + { 0xfe400, 1, 0x1f, 0xe00}, + { 0xfe404, 255, 0x1f, 0xc00}, + { 0xfe800, 1, 0x1f, 0xe00}, + { 0xfe804, 255, 0x1f, 0xc00}, + { 0xfec00, 1, 0x1f, 0xe00}, + { 0xfec04, 255, 0x1f, 0xc00}, + { 0xff000, 1, 0x1f, 0xe00}, + { 0xff004, 255, 0x1f, 0xc00}, + { 0xff400, 1, 0x1f, 0xe00}, + { 0xff404, 255, 0x1f, 0xc00}, + { 0xff800, 1, 0x1f, 0xe00}, + { 0xff804, 255, 0x1f, 0xc00}, + { 0xffc00, 1, 0x1f, 0xe00}, + { 0xffc04, 255, 0x1f, 0xc00}, + { 0x101000, 5, 0x1f, 0x924}, + { 0x101014, 1, 0x1f, 0xfff}, + { 0x101018, 6, 0x1f, 0x924}, + { 0x101040, 2, 0x1f, 0x1fff}, + { 0x10104c, 1, 0x1f, 0x1fff}, + { 0x101050, 1, 0x1e, 0x924}, + { 0x101054, 3, 0x1c, 0x924}, + { 0x101100, 1, 0x1f, 0x924}, + { 0x101800, 8, 0x1f, 0x924}, + { 0x102000, 18, 0x1f, 0x924}, + { 0x102058, 2, 0x1f, 0x1fff}, + { 0x102064, 1, 0x1f, 0x1fff}, + { 0x102068, 6, 0x1c, 0x924}, + { 0x102080, 16, 0x1f, 0xfff}, + { 0x1020c0, 1, 0x1f, 0x924}, + { 0x1020c8, 8, 0x2, 0x924}, + { 0x1020e8, 9, 0x1c, 0x924}, + { 0x102400, 1, 0x1f, 0x924}, + { 0x103000, 1, 0x1f, 0x924}, + { 0x103004, 2, 0x1f, 0xfff}, + { 0x10300c, 23, 0x1f, 0x924}, + { 0x103088, 2, 0x1f, 0x1fff}, + { 0x103094, 1, 0x1f, 0x1fff}, + { 0x103098, 1, 0x1e, 0x924}, + { 0x10309c, 2, 0x1e, 0xfff}, + { 0x1030a4, 2, 0x1e, 0x924}, + { 0x1030ac, 2, 0x1c, 0x924}, + { 0x1030b4, 1, 0x4, 0x924}, + { 0x1030b8, 2, 0x1c, 0xfff}, + { 0x1030c0, 3, 0x1c, 0x924}, + { 0x1030cc, 1, 0x1c, 0xfff}, + { 0x1030d0, 1, 0x1c, 0x924}, + { 0x1030d8, 2, 0x1c, 0x924}, + { 0x1030e0, 1, 0x1c, 0xfff}, + { 0x1030e4, 5, 0x1c, 0x924}, + { 0x103400, 136, 0x1c, 0x1fff}, + { 0x103800, 8, 0x1f, 0x924}, + { 0x104000, 1, 0x1f, 0x924}, + { 0x104004, 1, 0x1f, 0xfff}, + { 0x104008, 4, 0x1f, 0x924}, + { 0x104018, 1, 0x1f, 0xfff}, + { 0x10401c, 1, 0x1f, 0x924}, + { 0x104020, 1, 0x1f, 0xfff}, + { 0x104024, 6, 0x1f, 0x924}, + { 0x10403c, 1, 0x1f, 0xfff}, + { 0x104040, 47, 0x1f, 0x924}, + { 0x10410c, 2, 0x1f, 0x1fff}, + { 0x104118, 1, 0x1f, 0x1fff}, + { 0x10411c, 16, 0x1c, 0x924}, + { 0x104200, 17, 0x1f, 0x924}, + { 0x104400, 1, 0x1f, 0x1fff}, + { 0x104404, 63, 0x1f, 0xfff}, + { 0x104500, 192, 0x1f, 0xdb6}, + { 0x104800, 1, 0x1f, 0x1fff}, + { 0x104804, 63, 0x1f, 0xfff}, + { 0x104900, 192, 0x1f, 0xdb6}, + { 0x105000, 4, 0x1f, 0x1fff}, + { 0x105010, 252, 0x1f, 0xfff}, + { 0x105400, 768, 0x1f, 0xdb6}, + { 0x107000, 7, 0x1c, 0x924}, + { 0x10701c, 1, 0x18, 0x924}, + { 0x108000, 33, 0x3, 0x924}, + { 0x1080ac, 5, 0x2, 0x924}, + { 0x108100, 5, 0x3, 0x924}, + { 0x108120, 5, 0x3, 0x924}, + { 0x108200, 74, 0x3, 0x924}, + { 0x108400, 74, 0x3, 0x924}, + { 0x108800, 152, 0x3, 0x924}, + { 0x110000, 111, 0x1c, 0x924}, + { 0x1101cc, 2, 0x1c, 0x1fff}, + { 0x1101d8, 1, 0x1c, 0x1fff}, + { 0x1101dc, 1, 0x18, 0x924}, + { 0x110200, 4, 0x1c, 0x924}, + { 0x120000, 92, 0x1f, 0x924}, + { 0x120170, 2, 0x3, 0x924}, + { 0x120178, 14, 0x1f, 0x924}, + { 0x1201b0, 2, 0x1f, 0xfff}, + { 0x1201b8, 93, 0x1f, 0x924}, + { 0x12032c, 1, 0x1f, 0xfff}, + { 0x120330, 15, 0x1f, 0x924}, + { 0x12036c, 3, 0x1f, 0xfff}, + { 0x120378, 36, 0x1f, 0x924}, + { 0x120408, 2, 0x1f, 0xfff}, + { 0x120410, 1, 0x1f, 0x924}, + { 0x120414, 15, 0x1f, 0xfff}, + { 0x120450, 10, 0x1f, 0x924}, + { 0x120478, 2, 0x1f, 0xfff}, + { 0x120480, 43, 0x1f, 0x924}, + { 0x12052c, 1, 0x1f, 0xfff}, + { 0x120530, 5, 0x1f, 0x924}, + { 0x120544, 4, 0x3, 0x924}, + { 0x120554, 4, 0x1f, 0x924}, + { 0x120564, 2, 0x1f, 0xfff}, + { 0x12057c, 2, 0x1f, 0x1fff}, + { 0x120588, 3, 0x1f, 0x1fff}, + { 0x120598, 1, 0x1f, 0x1fff}, + { 0x12059c, 22, 0x1e, 0x924}, + { 0x1205f4, 1, 0x6, 0x924}, + { 0x1205f8, 4, 0x1c, 0x924}, + { 0x120618, 1, 0x1c, 0x924}, + { 0x12061c, 31, 0x1e, 0x924}, + { 0x120698, 3, 0x1c, 0x924}, + { 0x1206a4, 1, 0x4, 0x924}, + { 0x1206a8, 1, 0x1c, 0x924}, + { 0x1206b0, 38, 0x1c, 0x924}, + { 0x120748, 1, 0x1c, 0xfff}, + { 0x12074c, 11, 0x1c, 0x924}, + { 0x120778, 2, 0x1c, 0xfff}, + { 0x120780, 23, 0x1c, 0x924}, + { 0x1207dc, 1, 0x4, 0x924}, + { 0x1207fc, 1, 0x1c, 0x924}, + { 0x12080c, 2, 0x1f, 0xfff}, + { 0x120814, 1, 0x1f, 0x924}, + { 0x120818, 1, 0x1f, 0xfff}, + { 0x12081c, 1, 0x1f, 0x924}, + { 0x120820, 1, 0x1f, 0xfff}, + { 0x120824, 1, 0x1f, 0x924}, + { 0x120828, 1, 0x1f, 0xfff}, + { 0x12082c, 1, 0x1f, 0x924}, + { 0x120830, 1, 0x1f, 0xfff}, + { 0x120834, 1, 0x1f, 0x924}, + { 0x120838, 1, 0x1f, 0xfff}, + { 0x12083c, 1, 0x1f, 0x924}, + { 0x120840, 1, 0x1f, 0xfff}, + { 0x120844, 1, 0x1f, 0x924}, + { 0x120848, 1, 0x1f, 0xfff}, + { 0x12084c, 1, 0x1f, 0x924}, + { 0x120850, 1, 0x1f, 0xfff}, + { 0x120854, 1, 0x1f, 0x924}, + { 0x120858, 1, 0x1f, 0xfff}, + { 0x12085c, 1, 0x1f, 0x924}, + { 0x120860, 1, 0x1f, 0xfff}, + { 0x120864, 1, 0x1f, 0x924}, + { 0x120868, 1, 0x1f, 0xfff}, + { 0x12086c, 1, 0x1f, 0x924}, + { 0x120870, 1, 0x1f, 0xfff}, + { 0x120874, 1, 0x1f, 0x924}, + { 0x120878, 1, 0x1f, 0xfff}, + { 0x12087c, 1, 0x1f, 0x924}, + { 0x120880, 1, 0x1f, 0xfff}, + { 0x120884, 1, 0x1f, 0x924}, + { 0x120888, 1, 0x1f, 0xfff}, + { 0x12088c, 1, 0x1f, 0x924}, + { 0x120890, 1, 0x1f, 0xfff}, + { 0x120894, 1, 0x1f, 0x924}, + { 0x120898, 1, 0x1f, 0xfff}, + { 0x12089c, 1, 0x1f, 0x924}, + { 0x1208a0, 1, 0x1f, 0xfff}, + { 0x1208a4, 1, 0x1f, 0x924}, + { 0x1208a8, 1, 0x1f, 0xfff}, + { 0x1208ac, 1, 0x1f, 0x924}, + { 0x1208b0, 1, 0x1f, 0xfff}, + { 0x1208b4, 1, 0x1f, 0x924}, + { 0x1208b8, 1, 0x1f, 0xfff}, + { 0x1208bc, 1, 0x1f, 0x924}, + { 0x1208c0, 1, 0x1f, 0xfff}, + { 0x1208c4, 1, 0x1f, 0x924}, + { 0x1208c8, 1, 0x1f, 0xfff}, + { 0x1208cc, 1, 0x1f, 0x924}, + { 0x1208d0, 1, 0x1f, 0xfff}, + { 0x1208d4, 1, 0x1f, 0x924}, + { 0x1208d8, 1, 0x1f, 0xfff}, + { 0x1208dc, 1, 0x1f, 0x924}, + { 0x1208e0, 1, 0x1f, 0xfff}, + { 0x1208e4, 1, 0x1f, 0x924}, + { 0x1208e8, 1, 0x1f, 0xfff}, + { 0x1208ec, 1, 0x1f, 0x924}, + { 0x1208f0, 1, 0x1f, 0xfff}, + { 0x1208f4, 1, 0x1f, 0x924}, + { 0x1208f8, 1, 0x1f, 0xfff}, + { 0x1208fc, 1, 0x1f, 0x924}, + { 0x120900, 1, 0x1f, 0xfff}, + { 0x120904, 1, 0x1f, 0x924}, + { 0x120908, 1, 0x1f, 0xfff}, + { 0x12090c, 1, 0x1f, 0x924}, + { 0x120910, 7, 0x1c, 0x924}, + { 0x120930, 9, 0x1c, 0x924}, + { 0x12095c, 37, 0x18, 0x924}, + { 0x120a00, 2, 0x7, 0x924}, + { 0x120b00, 1, 0x18, 0x924}, + { 0x122000, 2, 0x1f, 0x924}, + { 0x122008, 2046, 0x1, 0x924}, + { 0x128000, 6144, 0x1e, 0x924}, + { 0x130000, 1, 0x1c, 0x1fff}, + { 0x130004, 11, 0x1c, 0x924}, + { 0x130030, 1, 0x1c, 0xfff}, + { 0x130034, 6, 0x1c, 0x924}, + { 0x13004c, 3, 0x1c, 0xfff}, + { 0x130058, 3, 0x1c, 0x924}, + { 0x130064, 2, 0x1c, 0xfff}, + { 0x13006c, 8, 0x1c, 0x924}, + { 0x13009c, 2, 0x1c, 0x1fff}, + { 0x1300a8, 1, 0x1c, 0x1fff}, + { 0x130100, 12, 0x1c, 0x924}, + { 0x130130, 1, 0x1c, 0xfff}, + { 0x130134, 14, 0x1c, 0x924}, + { 0x13016c, 1, 0x1c, 0xfff}, + { 0x130170, 1, 0x1c, 0x924}, + { 0x130180, 1, 0x1c, 0x924}, + { 0x130200, 1, 0x1c, 0x924}, + { 0x130280, 1, 0x1c, 0x924}, + { 0x130300, 1, 0x1c, 0xfff}, + { 0x130304, 4, 0x1c, 0x924}, + { 0x130380, 1, 0x1c, 0x924}, + { 0x130400, 1, 0x1c, 0x924}, + { 0x130480, 1, 0x1c, 0xfff}, + { 0x130484, 4, 0x1c, 0x924}, + { 0x130800, 72, 0x1c, 0x924}, + { 0x131000, 136, 0x1c, 0x924}, + { 0x132000, 148, 0x1c, 0x924}, + { 0x134000, 544, 0x1c, 0x924}, + { 0x140000, 1, 0x1f, 0x924}, + { 0x140004, 9, 0xf, 0x924}, + { 0x140028, 8, 0x1f, 0x924}, + { 0x140048, 5, 0xf, 0x924}, + { 0x14005c, 2, 0xf, 0xfff}, + { 0x140064, 3, 0xf, 0x924}, + { 0x140070, 1, 0x1f, 0x924}, + { 0x140074, 10, 0xf, 0x924}, + { 0x14009c, 1, 0x1f, 0x924}, + { 0x1400a0, 5, 0xf, 0x924}, + { 0x1400b4, 7, 0x1f, 0x924}, + { 0x1400d0, 2, 0xf, 0xfff}, + { 0x1400d8, 2, 0xf, 0x924}, + { 0x1400e0, 1, 0xf, 0xfff}, + { 0x1400e4, 5, 0xf, 0x924}, + { 0x1400f8, 2, 0x1f, 0x924}, + { 0x140100, 5, 0x3, 0x924}, + { 0x140114, 5, 0xf, 0x924}, + { 0x140128, 7, 0x1f, 0x924}, + { 0x140144, 9, 0xf, 0x924}, + { 0x140168, 8, 0x1f, 0x924}, + { 0x140188, 3, 0xf, 0x924}, + { 0x140194, 13, 0x1f, 0x924}, + { 0x1401d8, 2, 0x1f, 0x1fff}, + { 0x1401e4, 1, 0x1f, 0x1fff}, + { 0x140200, 6, 0xf, 0xfff}, + { 0x1402e0, 2, 0xc, 0x924}, + { 0x1402e8, 2, 0x1c, 0x924}, + { 0x1402f0, 9, 0xc, 0x924}, + { 0x140314, 9, 0x10, 0x924}, + { 0x140338, 7, 0x10, 0xfff}, + { 0x140354, 7, 0x10, 0x924}, + { 0x140370, 7, 0x10, 0xfff}, + { 0x14038c, 14, 0x10, 0x924}, + { 0x1404b0, 14, 0x10, 0x924}, + { 0x15c000, 2, 0x1e, 0x924}, + { 0x15c008, 5, 0x2, 0x924}, + { 0x15c020, 8, 0x1c, 0x924}, + { 0x15c040, 1, 0xc, 0x924}, + { 0x15c044, 2, 0x1c, 0x924}, + { 0x15c04c, 8, 0xc, 0x924}, + { 0x15c06c, 8, 0x1c, 0x924}, + { 0x15c090, 13, 0x1c, 0x924}, + { 0x15c0c8, 24, 0x1c, 0x924}, + { 0x15c128, 2, 0xc, 0x924}, + { 0x15c130, 1, 0x1c, 0x924}, + { 0x15c138, 6, 0x1c, 0x924}, + { 0x15c150, 2, 0x18, 0x924}, + { 0x15c158, 2, 0x8, 0x924}, + { 0x15c160, 23, 0x10, 0x924}, + { 0x15c1bc, 6, 0x10, 0xfff}, + { 0x15c1d4, 23, 0x10, 0x924}, + { 0x15c230, 7, 0x10, 0xfff}, + { 0x15c24c, 90, 0x10, 0x924}, + { 0x160004, 6, 0x18, 0x924}, + { 0x16003c, 1, 0x10, 0x924}, + { 0x160040, 6, 0x18, 0x924}, + { 0x16005c, 6, 0x18, 0x924}, + { 0x160074, 1, 0x10, 0x924}, + { 0x160078, 2, 0x18, 0x924}, + { 0x160300, 8, 0x18, 0x924}, + { 0x160330, 6, 0x18, 0x924}, + { 0x160404, 6, 0x18, 0x924}, + { 0x16043c, 1, 0x10, 0x924}, + { 0x160440, 6, 0x18, 0x924}, + { 0x16045c, 6, 0x18, 0x924}, + { 0x160474, 1, 0x10, 0x924}, + { 0x160478, 2, 0x18, 0x924}, + { 0x160700, 8, 0x18, 0x924}, + { 0x160730, 6, 0x18, 0x924}, + { 0x161000, 7, 0x1f, 0x924}, + { 0x16102c, 2, 0x1f, 0x1fff}, + { 0x161038, 1, 0x1f, 0x1fff}, + { 0x16103c, 2, 0x1c, 0x924}, + { 0x161800, 2, 0x1f, 0x924}, + { 0x162000, 54, 0x18, 0x924}, + { 0x162200, 60, 0x18, 0x924}, + { 0x162400, 54, 0x18, 0x924}, + { 0x162600, 60, 0x18, 0x924}, + { 0x162800, 54, 0x18, 0x924}, + { 0x162a00, 60, 0x18, 0x924}, + { 0x162c00, 54, 0x18, 0x924}, + { 0x162e00, 60, 0x18, 0x924}, + { 0x163000, 1, 0x18, 0x924}, + { 0x163008, 1, 0x18, 0x924}, + { 0x163010, 1, 0x18, 0x924}, + { 0x163018, 1, 0x18, 0x924}, + { 0x163020, 5, 0x18, 0x924}, + { 0x163038, 3, 0x18, 0x924}, + { 0x163048, 3, 0x18, 0x924}, + { 0x163058, 1, 0x18, 0x924}, + { 0x163060, 1, 0x18, 0x924}, + { 0x163068, 1, 0x18, 0x924}, + { 0x163070, 3, 0x18, 0x924}, + { 0x163080, 1, 0x18, 0x924}, + { 0x163088, 3, 0x18, 0x924}, + { 0x163098, 1, 0x18, 0x924}, + { 0x1630a0, 1, 0x18, 0x924}, + { 0x1630a8, 1, 0x18, 0x924}, + { 0x1630b0, 2, 0x10, 0x924}, + { 0x1630c0, 1, 0x18, 0x924}, + { 0x1630c8, 1, 0x18, 0x924}, + { 0x1630d0, 1, 0x18, 0x924}, + { 0x1630d8, 1, 0x18, 0x924}, + { 0x1630e0, 2, 0x18, 0x924}, + { 0x163110, 1, 0x18, 0x924}, + { 0x163120, 2, 0x18, 0x924}, + { 0x163420, 4, 0x18, 0x924}, + { 0x163438, 2, 0x18, 0x924}, + { 0x163488, 2, 0x18, 0x924}, + { 0x163520, 2, 0x18, 0x924}, + { 0x163800, 1, 0x18, 0x924}, + { 0x163808, 1, 0x18, 0x924}, + { 0x163810, 1, 0x18, 0x924}, + { 0x163818, 1, 0x18, 0x924}, + { 0x163820, 5, 0x18, 0x924}, + { 0x163838, 3, 0x18, 0x924}, + { 0x163848, 3, 0x18, 0x924}, + { 0x163858, 1, 0x18, 0x924}, + { 0x163860, 1, 0x18, 0x924}, + { 0x163868, 1, 0x18, 0x924}, + { 0x163870, 3, 0x18, 0x924}, + { 0x163880, 1, 0x18, 0x924}, + { 0x163888, 3, 0x18, 0x924}, + { 0x163898, 1, 0x18, 0x924}, + { 0x1638a0, 1, 0x18, 0x924}, + { 0x1638a8, 1, 0x18, 0x924}, + { 0x1638b0, 2, 0x10, 0x924}, + { 0x1638c0, 1, 0x18, 0x924}, + { 0x1638c8, 1, 0x18, 0x924}, + { 0x1638d0, 1, 0x18, 0x924}, + { 0x1638d8, 1, 0x18, 0x924}, + { 0x1638e0, 2, 0x18, 0x924}, + { 0x163910, 1, 0x18, 0x924}, + { 0x163920, 2, 0x18, 0x924}, + { 0x163c20, 4, 0x18, 0x924}, + { 0x163c38, 2, 0x18, 0x924}, + { 0x163c88, 2, 0x18, 0x924}, + { 0x163d20, 2, 0x18, 0x924}, + { 0x164000, 5, 0x1f, 0x924}, + { 0x164014, 2, 0x1f, 0xfff}, + { 0x16401c, 53, 0x1f, 0x924}, + { 0x164100, 2, 0x1f, 0x1fff}, + { 0x16410c, 1, 0x1f, 0x1fff}, + { 0x164110, 2, 0x1e, 0x924}, + { 0x164118, 15, 0x1c, 0x924}, + { 0x164200, 1, 0x1f, 0x924}, + { 0x164208, 1, 0x1f, 0x924}, + { 0x164210, 1, 0x1f, 0x924}, + { 0x164218, 1, 0x1f, 0x924}, + { 0x164220, 1, 0x1f, 0x924}, + { 0x164228, 1, 0x1f, 0x924}, + { 0x164230, 1, 0x1f, 0x924}, + { 0x164238, 1, 0x1f, 0x924}, + { 0x164240, 1, 0x1f, 0x924}, + { 0x164248, 1, 0x1f, 0x924}, + { 0x164250, 1, 0x1f, 0x924}, + { 0x164258, 1, 0x1f, 0x924}, + { 0x164260, 1, 0x1f, 0x924}, + { 0x164270, 2, 0x1f, 0x924}, + { 0x164280, 2, 0x1f, 0x924}, + { 0x164800, 2, 0x1f, 0x924}, + { 0x165000, 2, 0x1f, 0x924}, + { 0x166000, 164, 0x1f, 0x924}, + { 0x1662b0, 2, 0x1f, 0x1fff}, + { 0x1662bc, 1, 0x1f, 0x1fff}, + { 0x1662cc, 7, 0x1c, 0x924}, + { 0x166400, 49, 0x1f, 0x924}, + { 0x1664c8, 32, 0x1f, 0x924}, + { 0x166548, 1, 0x1f, 0xfff}, + { 0x16654c, 1, 0x1f, 0x924}, + { 0x166550, 1, 0x1f, 0xfff}, + { 0x166554, 1, 0x1f, 0x924}, + { 0x166558, 1, 0x1f, 0xfff}, + { 0x16655c, 1, 0x1f, 0x924}, + { 0x166568, 2, 0x1f, 0x924}, + { 0x166570, 5, 0x1c, 0x924}, + { 0x166800, 1, 0x1f, 0x924}, + { 0x168000, 1, 0x1f, 0xfff}, + { 0x168004, 1, 0x1f, 0x924}, + { 0x168008, 1, 0x1f, 0xfff}, + { 0x16800c, 1, 0x1f, 0x924}, + { 0x168010, 1, 0x1f, 0xfff}, + { 0x168014, 1, 0x1f, 0x924}, + { 0x168018, 1, 0x1f, 0xfff}, + { 0x16801c, 3, 0x1f, 0x924}, + { 0x168028, 2, 0x1f, 0xfff}, + { 0x168030, 10, 0x1f, 0x924}, + { 0x168058, 9, 0x1f, 0xfff}, + { 0x16807c, 106, 0x1f, 0x924}, + { 0x168224, 2, 0x3, 0x924}, + { 0x16822c, 3, 0x1f, 0x924}, + { 0x168238, 1, 0x1f, 0xfff}, + { 0x16823c, 25, 0x1f, 0x924}, + { 0x1682a0, 12, 0x3, 0x924}, + { 0x1682d0, 7, 0x1f, 0xfff}, + { 0x1682ec, 5, 0x1f, 0x924}, + { 0x168300, 2, 0x3, 0xfff}, + { 0x168308, 65, 0x1f, 0xfff}, + { 0x16840c, 1, 0x1f, 0x924}, + { 0x168410, 2, 0x1f, 0xfff}, + { 0x168418, 2, 0x3, 0x924}, + { 0x168420, 6, 0x1f, 0x924}, + { 0x168448, 2, 0x1f, 0x1fff}, + { 0x168454, 1, 0x1f, 0x1fff}, + { 0x168800, 19, 0x1f, 0x924}, + { 0x168900, 1, 0x1f, 0x924}, + { 0x168a00, 128, 0x1f, 0xfff}, + { 0x16a000, 1536, 0x1f, 0x924}, + { 0x16c000, 1536, 0x1f, 0x924}, + { 0x16e000, 16, 0x2, 0x924}, + { 0x16e040, 8, 0x1c, 0x924}, + { 0x16e100, 1, 0x2, 0x924}, + { 0x16e200, 2, 0x2, 0xfff}, + { 0x16e400, 1, 0x2, 0x924}, + { 0x16e404, 2, 0x2, 0xfff}, + { 0x16e40c, 94, 0x2, 0x924}, + { 0x16e584, 64, 0x2, 0xfff}, + { 0x16e684, 2, 0x1e, 0xfff}, + { 0x16e68c, 4, 0x2, 0xfff}, + { 0x16e69c, 8, 0x2, 0x924}, + { 0x16e6bc, 4, 0x1e, 0x924}, + { 0x16e6cc, 4, 0x2, 0x924}, + { 0x16e6e0, 2, 0x1c, 0x924}, + { 0x16e6e8, 5, 0xc, 0x924}, + { 0x16e6fc, 4, 0x1c, 0xfff}, + { 0x16e70c, 1, 0x1c, 0x924}, + { 0x16e768, 17, 0x1c, 0x924}, + { 0x16e7ac, 12, 0x10, 0xfff}, + { 0x170000, 24, 0x1f, 0x924}, + { 0x170060, 4, 0x3, 0x924}, + { 0x170070, 13, 0x1f, 0x924}, + { 0x1700a4, 1, 0x1f, 0xfff}, + { 0x1700a8, 1, 0x1f, 0x924}, + { 0x1700ac, 2, 0x1f, 0xfff}, + { 0x1700b4, 3, 0x1f, 0x924}, + { 0x1700c0, 1, 0x1f, 0xfff}, + { 0x1700c4, 44, 0x1f, 0x924}, + { 0x170184, 2, 0x1f, 0x1fff}, + { 0x170190, 1, 0x1f, 0x1fff}, + { 0x170194, 11, 0x1c, 0x924}, + { 0x1701c4, 1, 0x1c, 0x924}, + { 0x1701cc, 7, 0x1c, 0x924}, + { 0x1701e8, 1, 0x18, 0x924}, + { 0x1701ec, 1, 0x1c, 0x924}, + { 0x1701f4, 1, 0x1c, 0x924}, + { 0x170200, 4, 0x1f, 0x924}, + { 0x170214, 1, 0x1f, 0x924}, + { 0x170218, 77, 0x1c, 0x924}, + { 0x170400, 64, 0x1c, 0x924}, + { 0x178000, 1, 0x1f, 0x924}, + { 0x180000, 61, 0x1f, 0x924}, + { 0x180114, 2, 0x1f, 0x1fff}, + { 0x180120, 3, 0x1f, 0x1fff}, + { 0x180130, 1, 0x1f, 0x1fff}, + { 0x18013c, 2, 0x1e, 0x924}, + { 0x180200, 27, 0x1f, 0x924}, + { 0x18026c, 1, 0x1f, 0xfff}, + { 0x180270, 12, 0x1f, 0x924}, + { 0x1802a0, 1, 0x1f, 0xfff}, + { 0x1802a4, 17, 0x1f, 0x924}, + { 0x180340, 4, 0x1f, 0x924}, + { 0x180380, 1, 0x1c, 0x924}, + { 0x180388, 1, 0x1c, 0x924}, + { 0x180390, 1, 0x1c, 0x924}, + { 0x180398, 1, 0x1c, 0x924}, + { 0x1803a0, 5, 0x1c, 0x924}, + { 0x1803b4, 2, 0x18, 0x924}, + { 0x181000, 4, 0x1f, 0x93c}, + { 0x181010, 1020, 0x1f, 0x38}, + { 0x182000, 4, 0x18, 0x924}, + { 0x1a0000, 1, 0x1f, 0x92c}, + { 0x1a0004, 5631, 0x1f, 0x8}, + { 0x1a5800, 2560, 0x1e, 0x8}, + { 0x1a8000, 1, 0x1f, 0x92c}, + { 0x1a8004, 8191, 0x1e, 0x8}, + { 0x1b0000, 1, 0x1f, 0x92c}, + { 0x1b0004, 15, 0x2, 0x8}, + { 0x1b0040, 1, 0x1e, 0x92c}, + { 0x1b0044, 239, 0x2, 0x8}, + { 0x1b0400, 1, 0x1f, 0x92c}, + { 0x1b0404, 255, 0x2, 0x8}, + { 0x1b0800, 1, 0x1f, 0x924}, + { 0x1b0840, 1, 0x1e, 0x924}, + { 0x1b0c00, 1, 0x1f, 0x1fff}, + { 0x1b1000, 1, 0x1f, 0x1fff}, + { 0x1b1040, 1, 0x1e, 0x1fff}, + { 0x1b1400, 1, 0x1f, 0x924}, + { 0x1b1440, 1, 0x1e, 0x924}, + { 0x1b1480, 1, 0x1e, 0x924}, + { 0x1b14c0, 1, 0x1e, 0x924}, + { 0x1b1800, 128, 0x1f, 0x10}, + { 0x1b1c00, 128, 0x1f, 0x10}, + { 0x1b2000, 1, 0x1f, 0xdb6}, + { 0x1b2400, 1, 0x1e, 0x92c}, + { 0x1b2404, 5631, 0x1c, 0x8}, + { 0x1b8000, 1, 0x1f, 0xfff}, + { 0x1b8040, 1, 0x1f, 0xfff}, + { 0x1b8080, 1, 0x1f, 0xfff}, + { 0x1b80c0, 1, 0x1f, 0xfff}, + { 0x1b8100, 1, 0x1f, 0x924}, + { 0x1b8140, 1, 0x1f, 0x924}, + { 0x1b8180, 1, 0x1f, 0x924}, + { 0x1b81c0, 1, 0x1f, 0x924}, + { 0x1b8200, 1, 0x1f, 0x924}, + { 0x1b8240, 1, 0x1f, 0x924}, + { 0x1b8280, 1, 0x1f, 0x924}, + { 0x1b82c0, 1, 0x1f, 0x924}, + { 0x1b8300, 1, 0x1f, 0x924}, + { 0x1b8340, 1, 0x1f, 0x924}, + { 0x1b8380, 1, 0x1f, 0x924}, + { 0x1b83c0, 1, 0x1f, 0x924}, + { 0x1b8400, 1, 0x1f, 0x924}, + { 0x1b8440, 1, 0x1f, 0x924}, + { 0x1b8480, 1, 0x1f, 0x924}, + { 0x1b84c0, 1, 0x1f, 0x924}, + { 0x1b8500, 1, 0x1f, 0x924}, + { 0x1b8540, 1, 0x1f, 0x924}, + { 0x1b8580, 1, 0x1f, 0x924}, + { 0x1b85c0, 19, 0x1c, 0x924}, + { 0x1b8800, 1, 0x1f, 0x924}, + { 0x1b8840, 1, 0x1f, 0x924}, + { 0x1b8880, 1, 0x1f, 0x924}, + { 0x1b88c0, 1, 0x1f, 0x924}, + { 0x1b8900, 1, 0x1f, 0x924}, + { 0x1b8940, 1, 0x1f, 0x924}, + { 0x1b8980, 1, 0x1f, 0x924}, + { 0x1b89c0, 1, 0x1f, 0x924}, + { 0x1b8a00, 1, 0x1f, 0x934}, + { 0x1b8a40, 1, 0x1f, 0x924}, + { 0x1b8a80, 1, 0x1f, 0x492}, + { 0x1b8ac0, 1, 0x1f, 0x924}, + { 0x1b8b00, 1, 0x1f, 0x924}, + { 0x1b8b40, 1, 0x1f, 0x924}, + { 0x1b8b80, 1, 0x1f, 0x924}, + { 0x1b8bc0, 1, 0x1f, 0x924}, + { 0x1b8c00, 1, 0x1f, 0x924}, + { 0x1b8c40, 1, 0x1f, 0x924}, + { 0x1b8c80, 1, 0x1f, 0x924}, + { 0x1b8cc0, 1, 0x1f, 0x924}, + { 0x1b8cc4, 1, 0x1c, 0x924}, + { 0x1b8d00, 1, 0x1f, 0x924}, + { 0x1b8d40, 1, 0x1f, 0x924}, + { 0x1b8d80, 1, 0x1f, 0x924}, + { 0x1b8dc0, 1, 0x1f, 0x924}, + { 0x1b8e00, 1, 0x1f, 0x924}, + { 0x1b8e40, 1, 0x1f, 0x924}, + { 0x1b8e80, 1, 0x1f, 0x924}, + { 0x1b8e84, 1, 0x1c, 0x924}, + { 0x1b8ec0, 1, 0x1e, 0x924}, + { 0x1b8f00, 1, 0x1e, 0x924}, + { 0x1b8f40, 1, 0x1e, 0x924}, + { 0x1b8f80, 1, 0x1e, 0x924}, + { 0x1b8fc0, 1, 0x1e, 0x924}, + { 0x1b8fd4, 5, 0x1c, 0x924}, + { 0x1b8fe8, 2, 0x18, 0x924}, + { 0x1b9000, 1, 0x1c, 0x924}, + { 0x1b9040, 3, 0x1c, 0x924}, + { 0x1b905c, 1, 0x18, 0x924}, + { 0x1b9064, 1, 0x10, 0x924}, + { 0x1b9080, 10, 0x10, 0x924}, + { 0x1c0000, 2, 0x1f, 0x924}, + { 0x200000, 65, 0x1f, 0x924}, + { 0x200124, 2, 0x1f, 0x1fff}, + { 0x200130, 3, 0x1f, 0x1fff}, + { 0x200140, 1, 0x1f, 0x1fff}, + { 0x20014c, 2, 0x1e, 0x924}, + { 0x200200, 27, 0x1f, 0x924}, + { 0x20026c, 1, 0x1f, 0xfff}, + { 0x200270, 12, 0x1f, 0x924}, + { 0x2002a0, 1, 0x1f, 0xfff}, + { 0x2002a4, 17, 0x1f, 0x924}, + { 0x200340, 4, 0x1f, 0x924}, + { 0x200380, 1, 0x1c, 0x924}, + { 0x200388, 1, 0x1c, 0x924}, + { 0x200390, 1, 0x1c, 0x924}, + { 0x200398, 1, 0x1c, 0x924}, + { 0x2003a0, 1, 0x1c, 0x924}, + { 0x2003a8, 2, 0x1c, 0x924}, + { 0x202000, 4, 0x1f, 0x1927}, + { 0x202010, 2044, 0x1f, 0x1007}, + { 0x204000, 4, 0x18, 0x924}, + { 0x220000, 1, 0x1f, 0x925}, + { 0x220004, 5631, 0x1f, 0x1}, + { 0x225800, 2560, 0x1e, 0x1}, + { 0x228000, 1, 0x1f, 0x925}, + { 0x228004, 8191, 0x1e, 0x1}, + { 0x230000, 1, 0x1f, 0x925}, + { 0x230004, 15, 0x2, 0x1}, + { 0x230040, 1, 0x1e, 0x925}, + { 0x230044, 239, 0x2, 0x1}, + { 0x230400, 1, 0x1f, 0x925}, + { 0x230404, 255, 0x2, 0x1}, + { 0x230800, 1, 0x1f, 0x924}, + { 0x230840, 1, 0x1e, 0x924}, + { 0x230c00, 1, 0x1f, 0x924}, + { 0x231000, 1, 0x1f, 0x924}, + { 0x231040, 1, 0x1e, 0x924}, + { 0x231400, 1, 0x1f, 0x924}, + { 0x231440, 1, 0x1e, 0x924}, + { 0x231480, 1, 0x1e, 0x924}, + { 0x2314c0, 1, 0x1e, 0x924}, + { 0x231800, 128, 0x1f, 0x2}, + { 0x231c00, 128, 0x1f, 0x2}, + { 0x232000, 1, 0x1f, 0xdb6}, + { 0x232400, 1, 0x1e, 0x925}, + { 0x232404, 5631, 0x1c, 0x1}, + { 0x238000, 1, 0x1f, 0xfff}, + { 0x238040, 1, 0x1f, 0xfff}, + { 0x238080, 1, 0x1f, 0xfff}, + { 0x2380c0, 1, 0x1f, 0xfff}, + { 0x238100, 1, 0x1f, 0x924}, + { 0x238140, 1, 0x1f, 0x924}, + { 0x238180, 1, 0x1f, 0x924}, + { 0x2381c0, 1, 0x1f, 0x924}, + { 0x238200, 1, 0x1f, 0x924}, + { 0x238240, 1, 0x1f, 0x924}, + { 0x238280, 1, 0x1f, 0x924}, + { 0x2382c0, 1, 0x1f, 0x924}, + { 0x238300, 1, 0x1f, 0x924}, + { 0x238340, 1, 0x1f, 0x924}, + { 0x238380, 1, 0x1f, 0x924}, + { 0x2383c0, 1, 0x1f, 0x924}, + { 0x238400, 1, 0x1f, 0x924}, + { 0x238440, 1, 0x1f, 0x924}, + { 0x238480, 1, 0x1f, 0x924}, + { 0x2384c0, 1, 0x1f, 0x924}, + { 0x238500, 1, 0x1f, 0x924}, + { 0x238540, 1, 0x1f, 0x924}, + { 0x238580, 1, 0x1f, 0x924}, + { 0x2385c0, 19, 0x1c, 0x924}, + { 0x238800, 1, 0x1f, 0x924}, + { 0x238840, 1, 0x1f, 0x924}, + { 0x238880, 1, 0x1f, 0x924}, + { 0x2388c0, 1, 0x1f, 0x924}, + { 0x238900, 1, 0x1f, 0x924}, + { 0x238940, 1, 0x1f, 0x924}, + { 0x238980, 1, 0x1f, 0x924}, + { 0x2389c0, 1, 0x1f, 0x924}, + { 0x238a00, 1, 0x1f, 0x926}, + { 0x238a40, 1, 0x1f, 0x924}, + { 0x238a80, 1, 0x1f, 0x492}, + { 0x238ac0, 1, 0x1f, 0x924}, + { 0x238b00, 1, 0x1f, 0x924}, + { 0x238b40, 1, 0x1f, 0x924}, + { 0x238b80, 1, 0x1f, 0x924}, + { 0x238bc0, 1, 0x1f, 0x924}, + { 0x238c00, 1, 0x1f, 0x924}, + { 0x238c40, 1, 0x1f, 0x924}, + { 0x238c80, 1, 0x1f, 0x924}, + { 0x238cc0, 1, 0x1f, 0x924}, + { 0x238cc4, 1, 0x1c, 0x924}, + { 0x238d00, 1, 0x1f, 0x924}, + { 0x238d40, 1, 0x1f, 0x924}, + { 0x238d80, 1, 0x1f, 0x924}, + { 0x238dc0, 1, 0x1f, 0x924}, + { 0x238e00, 1, 0x1f, 0x924}, + { 0x238e40, 1, 0x1f, 0x924}, + { 0x238e80, 1, 0x1f, 0x924}, + { 0x238e84, 1, 0x1c, 0x924}, + { 0x238ec0, 1, 0x1e, 0x924}, + { 0x238f00, 1, 0x1e, 0x924}, + { 0x238f40, 1, 0x1e, 0x924}, + { 0x238f80, 1, 0x1e, 0x924}, + { 0x238fc0, 1, 0x1e, 0x924}, + { 0x238fd4, 5, 0x1c, 0x924}, + { 0x238fe8, 2, 0x18, 0x924}, + { 0x239000, 1, 0x1c, 0x924}, + { 0x239040, 3, 0x1c, 0x924}, + { 0x23905c, 1, 0x18, 0x924}, + { 0x239064, 1, 0x10, 0x924}, + { 0x239080, 10, 0x10, 0x924}, + { 0x240000, 2, 0x1f, 0x924}, + { 0x280000, 65, 0x1f, 0x924}, + { 0x280124, 2, 0x1f, 0x1fff}, + { 0x280130, 3, 0x1f, 0x1fff}, + { 0x280140, 1, 0x1f, 0x1fff}, + { 0x28014c, 2, 0x1e, 0x924}, + { 0x280200, 27, 0x1f, 0x924}, + { 0x28026c, 1, 0x1f, 0xfff}, + { 0x280270, 12, 0x1f, 0x924}, + { 0x2802a0, 1, 0x1f, 0xfff}, + { 0x2802a4, 17, 0x1f, 0x924}, + { 0x280340, 4, 0x1f, 0x924}, + { 0x280380, 1, 0x1c, 0x924}, + { 0x280388, 1, 0x1c, 0x924}, + { 0x280390, 1, 0x1c, 0x924}, + { 0x280398, 1, 0x1c, 0x924}, + { 0x2803a0, 1, 0x1c, 0x924}, + { 0x2803a8, 2, 0x1c, 0x924}, + { 0x282000, 4, 0x1f, 0x9e4}, + { 0x282010, 2044, 0x1f, 0x1c0}, + { 0x284000, 4, 0x18, 0x924}, + { 0x2a0000, 1, 0x1f, 0x964}, + { 0x2a0004, 5631, 0x1f, 0x40}, + { 0x2a5800, 2560, 0x1e, 0x40}, + { 0x2a8000, 1, 0x1f, 0x964}, + { 0x2a8004, 8191, 0x1e, 0x40}, + { 0x2b0000, 1, 0x1f, 0x964}, + { 0x2b0004, 15, 0x2, 0x40}, + { 0x2b0040, 1, 0x1e, 0x964}, + { 0x2b0044, 239, 0x2, 0x40}, + { 0x2b0400, 1, 0x1f, 0x964}, + { 0x2b0404, 255, 0x2, 0x40}, + { 0x2b0800, 1, 0x1f, 0x924}, + { 0x2b0840, 1, 0x1e, 0x924}, + { 0x2b0c00, 1, 0x1f, 0x924}, + { 0x2b1000, 1, 0x1f, 0x924}, + { 0x2b1040, 1, 0x1e, 0x924}, + { 0x2b1400, 1, 0x1f, 0x924}, + { 0x2b1440, 1, 0x1e, 0x924}, + { 0x2b1480, 1, 0x1e, 0x924}, + { 0x2b14c0, 1, 0x1e, 0x924}, + { 0x2b1800, 128, 0x1f, 0x80}, + { 0x2b1c00, 128, 0x1f, 0x80}, + { 0x2b2000, 1, 0x1f, 0xdb6}, + { 0x2b2400, 1, 0x1e, 0x964}, + { 0x2b2404, 5631, 0x1c, 0x40}, + { 0x2b8000, 1, 0x1f, 0xfff}, + { 0x2b8040, 1, 0x1f, 0xfff}, + { 0x2b8080, 1, 0x1f, 0xfff}, + { 0x2b80c0, 1, 0x1f, 0x924}, + { 0x2b8100, 1, 0x1f, 0x924}, + { 0x2b8140, 1, 0x1f, 0x924}, + { 0x2b8180, 1, 0x1f, 0x924}, + { 0x2b81c0, 1, 0x1f, 0x924}, + { 0x2b8200, 1, 0x1f, 0x924}, + { 0x2b8240, 1, 0x1f, 0x924}, + { 0x2b8280, 1, 0x1f, 0x924}, + { 0x2b82c0, 1, 0x1f, 0x924}, + { 0x2b8300, 1, 0x1f, 0x924}, + { 0x2b8340, 1, 0x1f, 0x924}, + { 0x2b8380, 1, 0x1f, 0x924}, + { 0x2b83c0, 1, 0x1f, 0x924}, + { 0x2b8400, 1, 0x1f, 0x924}, + { 0x2b8440, 1, 0x1f, 0x924}, + { 0x2b8480, 1, 0x1f, 0x924}, + { 0x2b84c0, 1, 0x1f, 0x924}, + { 0x2b8500, 1, 0x1f, 0x924}, + { 0x2b8540, 1, 0x1f, 0x924}, + { 0x2b8580, 1, 0x1f, 0x924}, + { 0x2b85c0, 19, 0x1c, 0x924}, + { 0x2b8800, 1, 0x1f, 0x924}, + { 0x2b8840, 1, 0x1f, 0x924}, + { 0x2b8880, 1, 0x1f, 0x924}, + { 0x2b88c0, 1, 0x1f, 0x924}, + { 0x2b8900, 1, 0x1f, 0x924}, + { 0x2b8940, 1, 0x1f, 0x924}, + { 0x2b8980, 1, 0x1f, 0x924}, + { 0x2b89c0, 1, 0x1f, 0x924}, + { 0x2b8a00, 1, 0x1f, 0x9a4}, + { 0x2b8a40, 1, 0x1f, 0x924}, + { 0x2b8a80, 1, 0x1f, 0x492}, + { 0x2b8ac0, 1, 0x1f, 0x924}, + { 0x2b8b00, 1, 0x1f, 0x924}, + { 0x2b8b40, 1, 0x1f, 0x924}, + { 0x2b8b80, 1, 0x1f, 0x924}, + { 0x2b8bc0, 1, 0x1f, 0x924}, + { 0x2b8c00, 1, 0x1f, 0x924}, + { 0x2b8c40, 1, 0x1f, 0x924}, + { 0x2b8c80, 1, 0x1f, 0x924}, + { 0x2b8cc0, 1, 0x1f, 0x924}, + { 0x2b8cc4, 1, 0x1c, 0x924}, + { 0x2b8d00, 1, 0x1f, 0x924}, + { 0x2b8d40, 1, 0x1f, 0x924}, + { 0x2b8d80, 1, 0x1f, 0x924}, + { 0x2b8dc0, 1, 0x1f, 0x924}, + { 0x2b8e00, 1, 0x1f, 0x924}, + { 0x2b8e40, 1, 0x1f, 0x924}, + { 0x2b8e80, 1, 0x1f, 0x924}, + { 0x2b8e84, 1, 0x1c, 0x924}, + { 0x2b8ec0, 1, 0x1e, 0x924}, + { 0x2b8f00, 1, 0x1e, 0x924}, + { 0x2b8f40, 1, 0x1e, 0x924}, + { 0x2b8f80, 1, 0x1e, 0x924}, + { 0x2b8fc0, 1, 0x1e, 0x924}, + { 0x2b8fd4, 5, 0x1c, 0x924}, + { 0x2b8fe8, 2, 0x18, 0x924}, + { 0x2b9000, 1, 0x1c, 0x924}, + { 0x2b9040, 3, 0x1c, 0x924}, + { 0x2b905c, 1, 0x18, 0x924}, + { 0x2b9064, 1, 0x10, 0x924}, + { 0x2b9080, 10, 0x10, 0x924}, + { 0x2c0000, 2, 0x1f, 0x1fff}, + { 0x300000, 65, 0x1f, 0x924}, + { 0x300124, 2, 0x1f, 0x1fff}, + { 0x300130, 3, 0x1f, 0x1fff}, + { 0x300140, 1, 0x1f, 0x1fff}, + { 0x30014c, 2, 0x1e, 0x924}, + { 0x300200, 27, 0x1f, 0x924}, + { 0x30026c, 1, 0x1f, 0xfff}, + { 0x300270, 12, 0x1f, 0x924}, + { 0x3002a0, 1, 0x1f, 0xfff}, + { 0x3002a4, 17, 0x1f, 0x924}, + { 0x300340, 4, 0x1f, 0x924}, + { 0x300380, 1, 0x1c, 0x924}, + { 0x300388, 1, 0x1c, 0x924}, + { 0x300390, 1, 0x1c, 0x924}, + { 0x300398, 1, 0x1c, 0x924}, + { 0x3003a0, 1, 0x1c, 0x924}, + { 0x3003a8, 2, 0x1c, 0x924}, + { 0x302000, 4, 0x1f, 0xf24}, + { 0x302010, 2044, 0x1f, 0xe00}, + { 0x304000, 4, 0x18, 0x924}, + { 0x320000, 1, 0x1f, 0xb24}, + { 0x320004, 5631, 0x1f, 0x200}, + { 0x325800, 2560, 0x1e, 0x200}, + { 0x328000, 1, 0x1f, 0xb24}, + { 0x328004, 8191, 0x1e, 0x200}, + { 0x330000, 1, 0x1f, 0xb24}, + { 0x330004, 15, 0x2, 0x200}, + { 0x330040, 1, 0x1e, 0xb24}, + { 0x330044, 239, 0x2, 0x200}, + { 0x330400, 1, 0x1f, 0xb24}, + { 0x330404, 255, 0x2, 0x200}, + { 0x330800, 1, 0x1f, 0x924}, + { 0x330840, 1, 0x1e, 0x924}, + { 0x330c00, 1, 0x1f, 0x924}, + { 0x331000, 1, 0x1f, 0x924}, + { 0x331040, 1, 0x1e, 0x924}, + { 0x331400, 1, 0x1f, 0x924}, + { 0x331440, 1, 0x1e, 0x924}, + { 0x331480, 1, 0x1e, 0x924}, + { 0x3314c0, 1, 0x1e, 0x924}, + { 0x331800, 128, 0x1f, 0x400}, + { 0x331c00, 128, 0x1f, 0x400}, + { 0x332000, 1, 0x1f, 0xdb6}, + { 0x332400, 1, 0x1e, 0xb24}, + { 0x332404, 5631, 0x1c, 0x200}, + { 0x338000, 1, 0x1f, 0xfff}, + { 0x338040, 1, 0x1f, 0xfff}, + { 0x338080, 1, 0x1f, 0xfff}, + { 0x3380c0, 1, 0x1f, 0xfff}, + { 0x338100, 1, 0x1f, 0x924}, + { 0x338140, 1, 0x1f, 0x924}, + { 0x338180, 1, 0x1f, 0x924}, + { 0x3381c0, 1, 0x1f, 0x924}, + { 0x338200, 1, 0x1f, 0x924}, + { 0x338240, 1, 0x1f, 0x924}, + { 0x338280, 1, 0x1f, 0x924}, + { 0x3382c0, 1, 0x1f, 0x924}, + { 0x338300, 1, 0x1f, 0x924}, + { 0x338340, 1, 0x1f, 0x924}, + { 0x338380, 1, 0x1f, 0x924}, + { 0x3383c0, 1, 0x1f, 0x924}, + { 0x338400, 1, 0x1f, 0x924}, + { 0x338440, 1, 0x1f, 0x924}, + { 0x338480, 1, 0x1f, 0x924}, + { 0x3384c0, 1, 0x1f, 0x924}, + { 0x338500, 1, 0x1f, 0x924}, + { 0x338540, 1, 0x1f, 0x924}, + { 0x338580, 1, 0x1f, 0x924}, + { 0x3385c0, 19, 0x1c, 0x924}, + { 0x338800, 1, 0x1f, 0x924}, + { 0x338840, 1, 0x1f, 0x924}, + { 0x338880, 1, 0x1f, 0x924}, + { 0x3388c0, 1, 0x1f, 0x924}, + { 0x338900, 1, 0x1f, 0x924}, + { 0x338940, 1, 0x1f, 0x924}, + { 0x338980, 1, 0x1f, 0x924}, + { 0x3389c0, 1, 0x1f, 0x924}, + { 0x338a00, 1, 0x1f, 0xd24}, + { 0x338a40, 1, 0x1f, 0x924}, + { 0x338a80, 1, 0x1f, 0x492}, + { 0x338ac0, 1, 0x1f, 0x924}, + { 0x338b00, 1, 0x1f, 0x924}, + { 0x338b40, 1, 0x1f, 0x924}, + { 0x338b80, 1, 0x1f, 0x924}, + { 0x338bc0, 1, 0x1f, 0x924}, + { 0x338c00, 1, 0x1f, 0x924}, + { 0x338c40, 1, 0x1f, 0x924}, + { 0x338c80, 1, 0x1f, 0x924}, + { 0x338cc0, 1, 0x1f, 0x924}, + { 0x338cc4, 1, 0x1c, 0x924}, + { 0x338d00, 1, 0x1f, 0x924}, + { 0x338d40, 1, 0x1f, 0x924}, + { 0x338d80, 1, 0x1f, 0x924}, + { 0x338dc0, 1, 0x1f, 0x924}, + { 0x338e00, 1, 0x1f, 0x924}, + { 0x338e40, 1, 0x1f, 0x924}, + { 0x338e80, 1, 0x1f, 0x924}, + { 0x338e84, 1, 0x1c, 0x924}, + { 0x338ec0, 1, 0x1e, 0x924}, + { 0x338f00, 1, 0x1e, 0x924}, + { 0x338f40, 1, 0x1e, 0x924}, + { 0x338f80, 1, 0x1e, 0x924}, + { 0x338fc0, 1, 0x1e, 0x924}, + { 0x338fd4, 5, 0x1c, 0x924}, + { 0x338fe8, 2, 0x18, 0x924}, + { 0x339000, 1, 0x1c, 0x924}, + { 0x339040, 3, 0x1c, 0x924}, + { 0x33905c, 1, 0x18, 0x924}, + { 0x339064, 1, 0x10, 0x924}, + { 0x339080, 10, 0x10, 0x924}, + { 0x340000, 2, 0x1f, 0x924}, + { 0x3a0000, 40960, 0x1c, 0x1000} +}; + +#define REGS_COUNT ARRAY_SIZE(reg_addrs) + +static const struct reg_addr idle_reg_addrs[] = { + { 0x2104, 1, 0x1f, 0xfff}, + { 0x2110, 2, 0x1f, 0xfff}, + { 0x211c, 8, 0x1f, 0xfff}, + { 0x2814, 1, 0x1f, 0xfff}, + { 0x281c, 2, 0x1f, 0xfff}, + { 0x2854, 1, 0x1f, 0xfff}, + { 0x285c, 1, 0x1f, 0xfff}, + { 0x3040, 1, 0x1f, 0xfff}, + { 0x9010, 7, 0x1c, 0xfff}, + { 0x9030, 1, 0x1c, 0xfff}, + { 0x9068, 16, 0x1c, 0xfff}, + { 0x9230, 2, 0x1c, 0xfff}, + { 0x9244, 1, 0x1c, 0xfff}, + { 0x9298, 1, 0x1c, 0xfff}, + { 0x92a8, 1, 0x1c, 0x1fff}, + { 0xa38c, 1, 0x1f, 0x1fff}, + { 0xa3c4, 1, 0x1e, 0xfff}, + { 0xa404, 1, 0x1f, 0xfff}, + { 0xa408, 2, 0x1f, 0x1fff}, + { 0xa42c, 12, 0x1f, 0xfff}, + { 0xa580, 1, 0x1f, 0x1fff}, + { 0xa590, 1, 0x1f, 0x1fff}, + { 0xa600, 5, 0x1e, 0xfff}, + { 0xa618, 1, 0x1e, 0xfff}, + { 0xa714, 1, 0x1c, 0xfff}, + { 0xa720, 1, 0x1c, 0xfff}, + { 0xa750, 1, 0x1c, 0xfff}, + { 0xc09c, 1, 0x3, 0xfff}, + { 0x103b0, 1, 0x1f, 0xfff}, + { 0x103c0, 1, 0x1f, 0xfff}, + { 0x103d0, 1, 0x3, 0x1fff}, + { 0x10418, 1, 0x1f, 0xfff}, + { 0x10420, 1, 0x1f, 0xfff}, + { 0x10428, 1, 0x1f, 0xfff}, + { 0x10460, 1, 0x1f, 0xfff}, + { 0x10474, 1, 0x1f, 0xfff}, + { 0x104e0, 1, 0x1f, 0xfff}, + { 0x104ec, 1, 0x1f, 0xfff}, + { 0x104f8, 1, 0x1f, 0xfff}, + { 0x10508, 1, 0x1f, 0xfff}, + { 0x10530, 1, 0x1f, 0xfff}, + { 0x10538, 1, 0x1f, 0xfff}, + { 0x10548, 1, 0x1f, 0xfff}, + { 0x10558, 1, 0x1f, 0xfff}, + { 0x182a8, 1, 0x1c, 0xfff}, + { 0x182b8, 1, 0x1c, 0xfff}, + { 0x18308, 1, 0x1c, 0xfff}, + { 0x18318, 1, 0x1c, 0xfff}, + { 0x18338, 1, 0x1c, 0xfff}, + { 0x18348, 1, 0x1c, 0xfff}, + { 0x183bc, 1, 0x1c, 0x1fff}, + { 0x183cc, 1, 0x1c, 0x1fff}, + { 0x18570, 1, 0x18, 0xfff}, + { 0x18578, 1, 0x18, 0xfff}, + { 0x1858c, 1, 0x18, 0xfff}, + { 0x18594, 1, 0x18, 0xfff}, + { 0x1862c, 4, 0x10, 0xfff}, + { 0x2021c, 11, 0x1f, 0xfff}, + { 0x202a8, 1, 0x1f, 0xfff}, + { 0x202b8, 1, 0x1f, 0x1fff}, + { 0x20404, 1, 0x1f, 0xfff}, + { 0x2040c, 2, 0x1f, 0xfff}, + { 0x2041c, 2, 0x1f, 0xfff}, + { 0x40154, 14, 0x1f, 0xfff}, + { 0x40198, 1, 0x1f, 0x1fff}, + { 0x404ac, 1, 0x1f, 0xfff}, + { 0x404bc, 1, 0x1f, 0x1fff}, + { 0x42290, 1, 0x1f, 0xfff}, + { 0x422a0, 1, 0x1f, 0xfff}, + { 0x422b0, 1, 0x1f, 0x1fff}, + { 0x42548, 1, 0x1f, 0xfff}, + { 0x42550, 1, 0x1f, 0xfff}, + { 0x42558, 1, 0x1f, 0xfff}, + { 0x50160, 8, 0x1f, 0xfff}, + { 0x501d0, 1, 0x1f, 0xfff}, + { 0x501e0, 1, 0x1f, 0x1fff}, + { 0x50204, 1, 0x1f, 0xfff}, + { 0x5020c, 2, 0x1f, 0xfff}, + { 0x5021c, 1, 0x1f, 0xfff}, + { 0x60090, 1, 0x1f, 0xfff}, + { 0x6011c, 1, 0x1f, 0xfff}, + { 0x6012c, 1, 0x1f, 0x1fff}, + { 0xc101c, 1, 0x1f, 0xfff}, + { 0xc102c, 1, 0x1f, 0x1fff}, + { 0xc2290, 1, 0x1f, 0xfff}, + { 0xc22a0, 1, 0x1f, 0xfff}, + { 0xc22b0, 1, 0x1f, 0x1fff}, + { 0xc2548, 1, 0x1f, 0xfff}, + { 0xc2550, 1, 0x1f, 0xfff}, + { 0xc2558, 1, 0x1f, 0xfff}, + { 0xc4294, 1, 0x1f, 0xfff}, + { 0xc42a4, 1, 0x1f, 0xfff}, + { 0xc42b4, 1, 0x1f, 0x1fff}, + { 0xc4550, 1, 0x1f, 0xfff}, + { 0xc4558, 1, 0x1f, 0xfff}, + { 0xc4560, 1, 0x1f, 0xfff}, + { 0xd016c, 8, 0x1f, 0xfff}, + { 0xd01d8, 1, 0x1f, 0xfff}, + { 0xd01e8, 1, 0x1f, 0x1fff}, + { 0xd0204, 1, 0x1f, 0xfff}, + { 0xd020c, 3, 0x1f, 0xfff}, + { 0xe0154, 8, 0x1f, 0xfff}, + { 0xe01c8, 1, 0x1f, 0xfff}, + { 0xe01d8, 1, 0x1f, 0x1fff}, + { 0xe0204, 1, 0x1f, 0xfff}, + { 0xe020c, 2, 0x1f, 0xfff}, + { 0xe021c, 2, 0x1f, 0xfff}, + { 0x101014, 1, 0x1f, 0xfff}, + { 0x101030, 1, 0x1f, 0xfff}, + { 0x101040, 1, 0x1f, 0x1fff}, + { 0x102058, 1, 0x1f, 0x1fff}, + { 0x102080, 16, 0x1f, 0xfff}, + { 0x103004, 2, 0x1f, 0xfff}, + { 0x103068, 1, 0x1f, 0xfff}, + { 0x103078, 1, 0x1f, 0xfff}, + { 0x103088, 1, 0x1f, 0x1fff}, + { 0x10309c, 2, 0x1e, 0xfff}, + { 0x1030b8, 2, 0x1c, 0xfff}, + { 0x1030cc, 1, 0x1c, 0xfff}, + { 0x1030e0, 1, 0x1c, 0xfff}, + { 0x104004, 1, 0x1f, 0xfff}, + { 0x104018, 1, 0x1f, 0xfff}, + { 0x104020, 1, 0x1f, 0xfff}, + { 0x10403c, 1, 0x1f, 0xfff}, + { 0x1040fc, 1, 0x1f, 0xfff}, + { 0x10410c, 1, 0x1f, 0x1fff}, + { 0x104400, 1, 0x1f, 0x1fff}, + { 0x104404, 63, 0x1f, 0xfff}, + { 0x104800, 1, 0x1f, 0x1fff}, + { 0x104804, 63, 0x1f, 0xfff}, + { 0x105000, 4, 0x1f, 0x1fff}, + { 0x105010, 252, 0x1f, 0xfff}, + { 0x108094, 1, 0x3, 0xfff}, + { 0x1201b0, 2, 0x1f, 0xfff}, + { 0x12032c, 1, 0x1f, 0xfff}, + { 0x12036c, 3, 0x1f, 0xfff}, + { 0x120408, 2, 0x1f, 0xfff}, + { 0x120414, 15, 0x1f, 0xfff}, + { 0x120478, 2, 0x1f, 0xfff}, + { 0x12052c, 1, 0x1f, 0xfff}, + { 0x120564, 3, 0x1f, 0xfff}, + { 0x12057c, 1, 0x1f, 0x1fff}, + { 0x12058c, 1, 0x1f, 0x1fff}, + { 0x120608, 1, 0x1e, 0xfff}, + { 0x120748, 1, 0x1c, 0xfff}, + { 0x120778, 2, 0x1c, 0xfff}, + { 0x120808, 3, 0x1f, 0xfff}, + { 0x120818, 1, 0x1f, 0xfff}, + { 0x120820, 1, 0x1f, 0xfff}, + { 0x120828, 1, 0x1f, 0xfff}, + { 0x120830, 1, 0x1f, 0xfff}, + { 0x120838, 1, 0x1f, 0xfff}, + { 0x120840, 1, 0x1f, 0xfff}, + { 0x120848, 1, 0x1f, 0xfff}, + { 0x120850, 1, 0x1f, 0xfff}, + { 0x120858, 1, 0x1f, 0xfff}, + { 0x120860, 1, 0x1f, 0xfff}, + { 0x120868, 1, 0x1f, 0xfff}, + { 0x120870, 1, 0x1f, 0xfff}, + { 0x120878, 1, 0x1f, 0xfff}, + { 0x120880, 1, 0x1f, 0xfff}, + { 0x120888, 1, 0x1f, 0xfff}, + { 0x120890, 1, 0x1f, 0xfff}, + { 0x120898, 1, 0x1f, 0xfff}, + { 0x1208a0, 1, 0x1f, 0xfff}, + { 0x1208a8, 1, 0x1f, 0xfff}, + { 0x1208b0, 1, 0x1f, 0xfff}, + { 0x1208b8, 1, 0x1f, 0xfff}, + { 0x1208c0, 1, 0x1f, 0xfff}, + { 0x1208c8, 1, 0x1f, 0xfff}, + { 0x1208d0, 1, 0x1f, 0xfff}, + { 0x1208d8, 1, 0x1f, 0xfff}, + { 0x1208e0, 1, 0x1f, 0xfff}, + { 0x1208e8, 1, 0x1f, 0xfff}, + { 0x1208f0, 1, 0x1f, 0xfff}, + { 0x1208f8, 1, 0x1f, 0xfff}, + { 0x120900, 1, 0x1f, 0xfff}, + { 0x120908, 1, 0x1f, 0xfff}, + { 0x130030, 1, 0x1c, 0xfff}, + { 0x13004c, 3, 0x1c, 0xfff}, + { 0x130064, 2, 0x1c, 0xfff}, + { 0x13009c, 1, 0x1c, 0x1fff}, + { 0x130130, 1, 0x1c, 0xfff}, + { 0x13016c, 1, 0x1c, 0xfff}, + { 0x130300, 1, 0x1c, 0xfff}, + { 0x130480, 1, 0x1c, 0xfff}, + { 0x14005c, 2, 0xf, 0xfff}, + { 0x1400d0, 2, 0xf, 0xfff}, + { 0x1400e0, 1, 0xf, 0xfff}, + { 0x1401c8, 1, 0xf, 0xfff}, + { 0x140200, 6, 0xf, 0xfff}, + { 0x140338, 7, 0x10, 0xfff}, + { 0x140370, 7, 0x10, 0xfff}, + { 0x15c1bc, 6, 0x10, 0xfff}, + { 0x15c230, 7, 0x10, 0xfff}, + { 0x16101c, 1, 0x1f, 0xfff}, + { 0x16102c, 1, 0x1f, 0x1fff}, + { 0x164014, 2, 0x1f, 0xfff}, + { 0x1640f0, 1, 0x1f, 0xfff}, + { 0x166290, 1, 0x1f, 0xfff}, + { 0x1662a0, 1, 0x1f, 0xfff}, + { 0x1662b0, 1, 0x1f, 0x1fff}, + { 0x166548, 1, 0x1f, 0xfff}, + { 0x166550, 1, 0x1f, 0xfff}, + { 0x166558, 1, 0x1f, 0xfff}, + { 0x168000, 1, 0x1f, 0xfff}, + { 0x168008, 1, 0x1f, 0xfff}, + { 0x168010, 1, 0x1f, 0xfff}, + { 0x168018, 1, 0x1f, 0xfff}, + { 0x168028, 2, 0x1f, 0xfff}, + { 0x168058, 9, 0x1f, 0xfff}, + { 0x168238, 1, 0x1f, 0xfff}, + { 0x1682d0, 7, 0x1f, 0xfff}, + { 0x168300, 2, 0x3, 0xfff}, + { 0x168308, 65, 0x1f, 0xfff}, + { 0x168410, 2, 0x1f, 0xfff}, + { 0x168438, 1, 0x1f, 0xfff}, + { 0x168448, 1, 0x1f, 0x1fff}, + { 0x168a00, 128, 0x1f, 0xfff}, + { 0x16e200, 128, 0x2, 0xfff}, + { 0x16e404, 2, 0x2, 0xfff}, + { 0x16e584, 64, 0x2, 0xfff}, + { 0x16e684, 2, 0x1e, 0xfff}, + { 0x16e68c, 4, 0x2, 0xfff}, + { 0x16e6fc, 4, 0x1c, 0xfff}, + { 0x16e7ac, 12, 0x10, 0xfff}, + { 0x1700a4, 1, 0x1f, 0xfff}, + { 0x1700ac, 2, 0x1f, 0xfff}, + { 0x1700c0, 1, 0x1f, 0xfff}, + { 0x170174, 1, 0x1f, 0xfff}, + { 0x170184, 1, 0x1f, 0x1fff}, + { 0x1800f4, 1, 0x1f, 0xfff}, + { 0x180104, 1, 0x1f, 0xfff}, + { 0x180114, 1, 0x1f, 0x1fff}, + { 0x180124, 1, 0x1f, 0x1fff}, + { 0x18026c, 1, 0x1f, 0xfff}, + { 0x1802a0, 1, 0x1f, 0xfff}, + { 0x1b8000, 1, 0x1f, 0xfff}, + { 0x1b8040, 1, 0x1f, 0xfff}, + { 0x1b8080, 1, 0x1f, 0xfff}, + { 0x1b80c0, 1, 0x1f, 0xfff}, + { 0x200104, 1, 0x1f, 0xfff}, + { 0x200114, 1, 0x1f, 0xfff}, + { 0x200124, 1, 0x1f, 0x1fff}, + { 0x200134, 1, 0x1f, 0x1fff}, + { 0x20026c, 1, 0x1f, 0xfff}, + { 0x2002a0, 1, 0x1f, 0xfff}, + { 0x238000, 1, 0x1f, 0xfff}, + { 0x238040, 1, 0x1f, 0xfff}, + { 0x238080, 1, 0x1f, 0xfff}, + { 0x2380c0, 1, 0x1f, 0xfff}, + { 0x280104, 1, 0x1f, 0xfff}, + { 0x280114, 1, 0x1f, 0xfff}, + { 0x280124, 1, 0x1f, 0x1fff}, + { 0x280134, 1, 0x1f, 0x1fff}, + { 0x28026c, 1, 0x1f, 0xfff}, + { 0x2802a0, 1, 0x1f, 0xfff}, + { 0x2b8000, 1, 0x1f, 0xfff}, + { 0x2b8040, 1, 0x1f, 0xfff}, + { 0x2b8080, 1, 0x1f, 0xfff}, + { 0x300104, 1, 0x1f, 0xfff}, + { 0x300114, 1, 0x1f, 0xfff}, + { 0x300124, 1, 0x1f, 0x1fff}, + { 0x300134, 1, 0x1f, 0x1fff}, + { 0x30026c, 1, 0x1f, 0xfff}, + { 0x3002a0, 1, 0x1f, 0xfff}, + { 0x338000, 1, 0x1f, 0xfff}, + { 0x338040, 1, 0x1f, 0xfff}, + { 0x338080, 1, 0x1f, 0xfff}, + { 0x3380c0, 1, 0x1f, 0xfff} +}; + +#define IDLE_REGS_COUNT ARRAY_SIZE(idle_reg_addrs) + +static const u32 read_reg_e1[] = { + 0x1b1000}; + +static const struct wreg_addr wreg_addr_e1 = { + 0x1b0c00, 192, 1, read_reg_e1, 0x1f, 0x1fff}; + +static const u32 read_reg_e1h[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e1h = { + 0x1b0c00, 256, 2, read_reg_e1h, 0x1f, 0x1fff}; + +static const u32 read_reg_e2[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e2 = { + 0x1b0c00, 128, 2, read_reg_e2, 0x1f, 0x1fff}; + +static const u32 read_reg_e3[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e3 = { + 0x1b0c00, 128, 2, read_reg_e3, 0x1f, 0x1fff}; + +static const u32 read_reg_e3b0[] = { + 0x1b1040, 0x1b1000}; + +static const struct wreg_addr wreg_addr_e3b0 = { + 0x1b0c00, 128, 2, read_reg_e3b0, 0x1f, 0x1fff}; + +static const unsigned int dump_num_registers[NUM_CHIPS][NUM_PRESETS] = { + {19758, 17543, 26951, 18705, 17287, 26695, 19812, 31367, 40775, 19788, + 25223, 34631, 19074}, + {31750, 18273, 32253, 30697, 18017, 31997, 31804, 32097, 46077, 31780, + 25953, 39933, 35895}, + {36527, 17928, 33697, 35474, 18700, 34466, 36581, 31752, 47521, 36557, + 25608, 41377, 43903}, + {45239, 17936, 34387, 44186, 18708, 35156, 45293, 31760, 48211, 45269, + 25616, 42067, 43903}, + {45302, 17999, 34802, 44249, 18771, 35571, 45356, 31823, 48626, 45332, + 25679, 42482, 43903} +}; +#endif diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c new file mode 100644 index 000000000..00f9ed933 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -0,0 +1,3707 @@ +/* bnx2x_ethtool.c: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/ethtool.h> +#include <linux/netdevice.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/crc32.h> +#include "bnx2x.h" +#include "bnx2x_cmn.h" +#include "bnx2x_dump.h" +#include "bnx2x_init.h" + +/* Note: in the format strings below %s is replaced by the queue-name which is + * either its index or 'fcoe' for the fcoe queue. Make sure the format string + * length does not exceed ETH_GSTRING_LEN - MAX_QUEUE_NAME_LEN + 2 + */ +#define MAX_QUEUE_NAME_LEN 4 +static const struct { + long offset; + int size; + char string[ETH_GSTRING_LEN]; +} bnx2x_q_stats_arr[] = { +/* 1 */ { Q_STATS_OFFSET32(total_bytes_received_hi), 8, "[%s]: rx_bytes" }, + { Q_STATS_OFFSET32(total_unicast_packets_received_hi), + 8, "[%s]: rx_ucast_packets" }, + { Q_STATS_OFFSET32(total_multicast_packets_received_hi), + 8, "[%s]: rx_mcast_packets" }, + { Q_STATS_OFFSET32(total_broadcast_packets_received_hi), + 8, "[%s]: rx_bcast_packets" }, + { Q_STATS_OFFSET32(no_buff_discard_hi), 8, "[%s]: rx_discards" }, + { Q_STATS_OFFSET32(rx_err_discard_pkt), + 4, "[%s]: rx_phy_ip_err_discards"}, + { Q_STATS_OFFSET32(rx_skb_alloc_failed), + 4, "[%s]: rx_skb_alloc_discard" }, + { Q_STATS_OFFSET32(hw_csum_err), 4, "[%s]: rx_csum_offload_errors" }, + { Q_STATS_OFFSET32(driver_xoff), 4, "[%s]: tx_exhaustion_events" }, + { Q_STATS_OFFSET32(total_bytes_transmitted_hi), 8, "[%s]: tx_bytes" }, +/* 10 */{ Q_STATS_OFFSET32(total_unicast_packets_transmitted_hi), + 8, "[%s]: tx_ucast_packets" }, + { Q_STATS_OFFSET32(total_multicast_packets_transmitted_hi), + 8, "[%s]: tx_mcast_packets" }, + { Q_STATS_OFFSET32(total_broadcast_packets_transmitted_hi), + 8, "[%s]: tx_bcast_packets" }, + { Q_STATS_OFFSET32(total_tpa_aggregations_hi), + 8, "[%s]: tpa_aggregations" }, + { Q_STATS_OFFSET32(total_tpa_aggregated_frames_hi), + 8, "[%s]: tpa_aggregated_frames"}, + { Q_STATS_OFFSET32(total_tpa_bytes_hi), 8, "[%s]: tpa_bytes"}, + { Q_STATS_OFFSET32(driver_filtered_tx_pkt), + 4, "[%s]: driver_filtered_tx_pkt" } +}; + +#define BNX2X_NUM_Q_STATS ARRAY_SIZE(bnx2x_q_stats_arr) + +static const struct { + long offset; + int size; + bool is_port_stat; + char string[ETH_GSTRING_LEN]; +} bnx2x_stats_arr[] = { +/* 1 */ { STATS_OFFSET32(total_bytes_received_hi), + 8, false, "rx_bytes" }, + { STATS_OFFSET32(error_bytes_received_hi), + 8, false, "rx_error_bytes" }, + { STATS_OFFSET32(total_unicast_packets_received_hi), + 8, false, "rx_ucast_packets" }, + { STATS_OFFSET32(total_multicast_packets_received_hi), + 8, false, "rx_mcast_packets" }, + { STATS_OFFSET32(total_broadcast_packets_received_hi), + 8, false, "rx_bcast_packets" }, + { STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi), + 8, true, "rx_crc_errors" }, + { STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi), + 8, true, "rx_align_errors" }, + { STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi), + 8, true, "rx_undersize_packets" }, + { STATS_OFFSET32(etherstatsoverrsizepkts_hi), + 8, true, "rx_oversize_packets" }, +/* 10 */{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi), + 8, true, "rx_fragments" }, + { STATS_OFFSET32(rx_stat_etherstatsjabbers_hi), + 8, true, "rx_jabbers" }, + { STATS_OFFSET32(no_buff_discard_hi), + 8, false, "rx_discards" }, + { STATS_OFFSET32(mac_filter_discard), + 4, true, "rx_filtered_packets" }, + { STATS_OFFSET32(mf_tag_discard), + 4, true, "rx_mf_tag_discard" }, + { STATS_OFFSET32(pfc_frames_received_hi), + 8, true, "pfc_frames_received" }, + { STATS_OFFSET32(pfc_frames_sent_hi), + 8, true, "pfc_frames_sent" }, + { STATS_OFFSET32(brb_drop_hi), + 8, true, "rx_brb_discard" }, + { STATS_OFFSET32(brb_truncate_hi), + 8, true, "rx_brb_truncate" }, + { STATS_OFFSET32(pause_frames_received_hi), + 8, true, "rx_pause_frames" }, + { STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi), + 8, true, "rx_mac_ctrl_frames" }, + { STATS_OFFSET32(nig_timer_max), + 4, true, "rx_constant_pause_events" }, +/* 20 */{ STATS_OFFSET32(rx_err_discard_pkt), + 4, false, "rx_phy_ip_err_discards"}, + { STATS_OFFSET32(rx_skb_alloc_failed), + 4, false, "rx_skb_alloc_discard" }, + { STATS_OFFSET32(hw_csum_err), + 4, false, "rx_csum_offload_errors" }, + { STATS_OFFSET32(driver_xoff), + 4, false, "tx_exhaustion_events" }, + { STATS_OFFSET32(total_bytes_transmitted_hi), + 8, false, "tx_bytes" }, + { STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi), + 8, true, "tx_error_bytes" }, + { STATS_OFFSET32(total_unicast_packets_transmitted_hi), + 8, false, "tx_ucast_packets" }, + { STATS_OFFSET32(total_multicast_packets_transmitted_hi), + 8, false, "tx_mcast_packets" }, + { STATS_OFFSET32(total_broadcast_packets_transmitted_hi), + 8, false, "tx_bcast_packets" }, + { STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi), + 8, true, "tx_mac_errors" }, + { STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi), + 8, true, "tx_carrier_errors" }, +/* 30 */{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi), + 8, true, "tx_single_collisions" }, + { STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi), + 8, true, "tx_multi_collisions" }, + { STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi), + 8, true, "tx_deferred" }, + { STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi), + 8, true, "tx_excess_collisions" }, + { STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi), + 8, true, "tx_late_collisions" }, + { STATS_OFFSET32(tx_stat_etherstatscollisions_hi), + 8, true, "tx_total_collisions" }, + { STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi), + 8, true, "tx_64_byte_packets" }, + { STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi), + 8, true, "tx_65_to_127_byte_packets" }, + { STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi), + 8, true, "tx_128_to_255_byte_packets" }, + { STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi), + 8, true, "tx_256_to_511_byte_packets" }, +/* 40 */{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi), + 8, true, "tx_512_to_1023_byte_packets" }, + { STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi), + 8, true, "tx_1024_to_1522_byte_packets" }, + { STATS_OFFSET32(etherstatspktsover1522octets_hi), + 8, true, "tx_1523_to_9022_byte_packets" }, + { STATS_OFFSET32(pause_frames_sent_hi), + 8, true, "tx_pause_frames" }, + { STATS_OFFSET32(total_tpa_aggregations_hi), + 8, false, "tpa_aggregations" }, + { STATS_OFFSET32(total_tpa_aggregated_frames_hi), + 8, false, "tpa_aggregated_frames"}, + { STATS_OFFSET32(total_tpa_bytes_hi), + 8, false, "tpa_bytes"}, + { STATS_OFFSET32(recoverable_error), + 4, false, "recoverable_errors" }, + { STATS_OFFSET32(unrecoverable_error), + 4, false, "unrecoverable_errors" }, + { STATS_OFFSET32(driver_filtered_tx_pkt), + 4, false, "driver_filtered_tx_pkt" }, + { STATS_OFFSET32(eee_tx_lpi), + 4, true, "Tx LPI entry count"}, + { STATS_OFFSET32(ptp_skip_tx_ts), + 4, false, "ptp_skipped_tx_tstamp" }, +}; + +#define BNX2X_NUM_STATS ARRAY_SIZE(bnx2x_stats_arr) + +static int bnx2x_get_port_type(struct bnx2x *bp) +{ + int port_type; + u32 phy_idx = bnx2x_get_cur_phy_idx(bp); + switch (bp->link_params.phy[phy_idx].media_type) { + case ETH_PHY_SFPP_10G_FIBER: + case ETH_PHY_SFP_1G_FIBER: + case ETH_PHY_XFP_FIBER: + case ETH_PHY_KR: + case ETH_PHY_CX4: + port_type = PORT_FIBRE; + break; + case ETH_PHY_DA_TWINAX: + port_type = PORT_DA; + break; + case ETH_PHY_BASE_T: + port_type = PORT_TP; + break; + case ETH_PHY_NOT_PRESENT: + port_type = PORT_NONE; + break; + case ETH_PHY_UNSPECIFIED: + default: + port_type = PORT_OTHER; + break; + } + return port_type; +} + +static int bnx2x_get_vf_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 supported, advertising; + + ethtool_convert_link_mode_to_legacy_u32(&supported, + cmd->link_modes.supported); + ethtool_convert_link_mode_to_legacy_u32(&advertising, + cmd->link_modes.advertising); + + if (bp->state == BNX2X_STATE_OPEN) { + if (test_bit(BNX2X_LINK_REPORT_FD, + &bp->vf_link_vars.link_report_flags)) + cmd->base.duplex = DUPLEX_FULL; + else + cmd->base.duplex = DUPLEX_HALF; + + cmd->base.speed = bp->vf_link_vars.line_speed; + } else { + cmd->base.duplex = DUPLEX_UNKNOWN; + cmd->base.speed = SPEED_UNKNOWN; + } + + cmd->base.port = PORT_OTHER; + cmd->base.phy_address = 0; + cmd->base.autoneg = AUTONEG_DISABLE; + + DP(BNX2X_MSG_ETHTOOL, "ethtool_cmd: cmd %d\n" + " supported 0x%x advertising 0x%x speed %u\n" + " duplex %d port %d phy_address %d\n" + " autoneg %d\n", + cmd->base.cmd, supported, advertising, + cmd->base.speed, + cmd->base.duplex, cmd->base.port, cmd->base.phy_address, + cmd->base.autoneg); + + return 0; +} + +static int bnx2x_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct bnx2x *bp = netdev_priv(dev); + int cfg_idx = bnx2x_get_link_cfg_idx(bp); + u32 media_type; + u32 supported, advertising, lp_advertising; + + ethtool_convert_link_mode_to_legacy_u32(&lp_advertising, + cmd->link_modes.lp_advertising); + + /* Dual Media boards present all available port types */ + supported = bp->port.supported[cfg_idx] | + (bp->port.supported[cfg_idx ^ 1] & + (SUPPORTED_TP | SUPPORTED_FIBRE)); + advertising = bp->port.advertising[cfg_idx]; + media_type = bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type; + if (media_type == ETH_PHY_SFP_1G_FIBER) { + supported &= ~(SUPPORTED_10000baseT_Full); + advertising &= ~(ADVERTISED_10000baseT_Full); + } + + if ((bp->state == BNX2X_STATE_OPEN) && bp->link_vars.link_up && + !(bp->flags & MF_FUNC_DIS)) { + cmd->base.duplex = bp->link_vars.duplex; + + if (IS_MF(bp) && !BP_NOMCP(bp)) + cmd->base.speed = bnx2x_get_mf_speed(bp); + else + cmd->base.speed = bp->link_vars.line_speed; + } else { + cmd->base.duplex = DUPLEX_UNKNOWN; + cmd->base.speed = SPEED_UNKNOWN; + } + + cmd->base.port = bnx2x_get_port_type(bp); + + cmd->base.phy_address = bp->mdio.prtad; + + if (bp->link_params.req_line_speed[cfg_idx] == SPEED_AUTO_NEG) + cmd->base.autoneg = AUTONEG_ENABLE; + else + cmd->base.autoneg = AUTONEG_DISABLE; + + /* Publish LP advertised speeds and FC */ + if (bp->link_vars.link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + u32 status = bp->link_vars.link_status; + + lp_advertising |= ADVERTISED_Autoneg; + if (status & LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE) + lp_advertising |= ADVERTISED_Pause; + if (status & LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE) + lp_advertising |= ADVERTISED_Asym_Pause; + + if (status & LINK_STATUS_LINK_PARTNER_10THD_CAPABLE) + lp_advertising |= ADVERTISED_10baseT_Half; + if (status & LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE) + lp_advertising |= ADVERTISED_10baseT_Full; + if (status & LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE) + lp_advertising |= ADVERTISED_100baseT_Half; + if (status & LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE) + lp_advertising |= ADVERTISED_100baseT_Full; + if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE) + lp_advertising |= ADVERTISED_1000baseT_Half; + if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE) { + if (media_type == ETH_PHY_KR) { + lp_advertising |= + ADVERTISED_1000baseKX_Full; + } else { + lp_advertising |= + ADVERTISED_1000baseT_Full; + } + } + if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE) + lp_advertising |= ADVERTISED_2500baseX_Full; + if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE) { + if (media_type == ETH_PHY_KR) { + lp_advertising |= + ADVERTISED_10000baseKR_Full; + } else { + lp_advertising |= + ADVERTISED_10000baseT_Full; + } + } + if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE) + lp_advertising |= ADVERTISED_20000baseKR2_Full; + } + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, + advertising); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising, + lp_advertising); + + DP(BNX2X_MSG_ETHTOOL, "ethtool_cmd: cmd %d\n" + " supported 0x%x advertising 0x%x speed %u\n" + " duplex %d port %d phy_address %d\n" + " autoneg %d\n", + cmd->base.cmd, supported, advertising, + cmd->base.speed, + cmd->base.duplex, cmd->base.port, cmd->base.phy_address, + cmd->base.autoneg); + + return 0; +} + +static int bnx2x_set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 advertising, cfg_idx, old_multi_phy_config, new_multi_phy_config; + u32 speed, phy_idx; + u32 supported; + u8 duplex = cmd->base.duplex; + + ethtool_convert_link_mode_to_legacy_u32(&supported, + cmd->link_modes.supported); + ethtool_convert_link_mode_to_legacy_u32(&advertising, + cmd->link_modes.advertising); + + if (IS_MF_SD(bp)) + return 0; + + DP(BNX2X_MSG_ETHTOOL, "ethtool_cmd: cmd %d\n" + " supported 0x%x advertising 0x%x speed %u\n" + " duplex %d port %d phy_address %d\n" + " autoneg %d\n", + cmd->base.cmd, supported, advertising, + cmd->base.speed, + cmd->base.duplex, cmd->base.port, cmd->base.phy_address, + cmd->base.autoneg); + + speed = cmd->base.speed; + + /* If received a request for an unknown duplex, assume full*/ + if (duplex == DUPLEX_UNKNOWN) + duplex = DUPLEX_FULL; + + if (IS_MF_SI(bp)) { + u32 part; + u32 line_speed = bp->link_vars.line_speed; + + /* use 10G if no link detected */ + if (!line_speed) + line_speed = 10000; + + if (bp->common.bc_ver < REQ_BC_VER_4_SET_MF_BW) { + DP(BNX2X_MSG_ETHTOOL, + "To set speed BC %X or higher is required, please upgrade BC\n", + REQ_BC_VER_4_SET_MF_BW); + return -EINVAL; + } + + part = (speed * 100) / line_speed; + + if (line_speed < speed || !part) { + DP(BNX2X_MSG_ETHTOOL, + "Speed setting should be in a range from 1%% to 100%% of actual line speed\n"); + return -EINVAL; + } + + if (bp->state != BNX2X_STATE_OPEN) + /* store value for following "load" */ + bp->pending_max = part; + else + bnx2x_update_max_mf_config(bp, part); + + return 0; + } + + cfg_idx = bnx2x_get_link_cfg_idx(bp); + old_multi_phy_config = bp->link_params.multi_phy_config; + if (cmd->base.port != bnx2x_get_port_type(bp)) { + switch (cmd->base.port) { + case PORT_TP: + if (!(bp->port.supported[0] & SUPPORTED_TP || + bp->port.supported[1] & SUPPORTED_TP)) { + DP(BNX2X_MSG_ETHTOOL, + "Unsupported port type\n"); + return -EINVAL; + } + bp->link_params.multi_phy_config &= + ~PORT_HW_CFG_PHY_SELECTION_MASK; + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) + bp->link_params.multi_phy_config |= + PORT_HW_CFG_PHY_SELECTION_SECOND_PHY; + else + bp->link_params.multi_phy_config |= + PORT_HW_CFG_PHY_SELECTION_FIRST_PHY; + break; + case PORT_FIBRE: + case PORT_DA: + case PORT_NONE: + if (!(bp->port.supported[0] & SUPPORTED_FIBRE || + bp->port.supported[1] & SUPPORTED_FIBRE)) { + DP(BNX2X_MSG_ETHTOOL, + "Unsupported port type\n"); + return -EINVAL; + } + bp->link_params.multi_phy_config &= + ~PORT_HW_CFG_PHY_SELECTION_MASK; + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) + bp->link_params.multi_phy_config |= + PORT_HW_CFG_PHY_SELECTION_FIRST_PHY; + else + bp->link_params.multi_phy_config |= + PORT_HW_CFG_PHY_SELECTION_SECOND_PHY; + break; + default: + DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n"); + return -EINVAL; + } + } + /* Save new config in case command complete successfully */ + new_multi_phy_config = bp->link_params.multi_phy_config; + /* Get the new cfg_idx */ + cfg_idx = bnx2x_get_link_cfg_idx(bp); + /* Restore old config in case command failed */ + bp->link_params.multi_phy_config = old_multi_phy_config; + DP(BNX2X_MSG_ETHTOOL, "cfg_idx = %x\n", cfg_idx); + + if (cmd->base.autoneg == AUTONEG_ENABLE) { + u32 an_supported_speed = bp->port.supported[cfg_idx]; + if (bp->link_params.phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + an_supported_speed |= (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); + if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) { + DP(BNX2X_MSG_ETHTOOL, "Autoneg not supported\n"); + return -EINVAL; + } + + /* advertise the requested speed and duplex if supported */ + if (advertising & ~an_supported_speed) { + DP(BNX2X_MSG_ETHTOOL, + "Advertisement parameters are not supported\n"); + return -EINVAL; + } + + bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG; + bp->link_params.req_duplex[cfg_idx] = duplex; + bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg | + advertising); + if (advertising) { + + bp->link_params.speed_cap_mask[cfg_idx] = 0; + if (advertising & ADVERTISED_10baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF; + } + if (advertising & ADVERTISED_10baseT_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL; + + if (advertising & ADVERTISED_100baseT_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL; + + if (advertising & ADVERTISED_100baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF; + } + if (advertising & ADVERTISED_1000baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G; + } + if (advertising & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseKX_Full)) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G; + + if (advertising & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G; + + if (advertising & ADVERTISED_20000baseKR2_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_20G; + } + } else { /* forced speed */ + /* advertise the requested speed and duplex if supported */ + switch (speed) { + case SPEED_10: + if (duplex == DUPLEX_FULL) { + if (!(bp->port.supported[cfg_idx] & + SUPPORTED_10baseT_Full)) { + DP(BNX2X_MSG_ETHTOOL, + "10M full not supported\n"); + return -EINVAL; + } + + advertising = (ADVERTISED_10baseT_Full | + ADVERTISED_TP); + } else { + if (!(bp->port.supported[cfg_idx] & + SUPPORTED_10baseT_Half)) { + DP(BNX2X_MSG_ETHTOOL, + "10M half not supported\n"); + return -EINVAL; + } + + advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_TP); + } + break; + + case SPEED_100: + if (duplex == DUPLEX_FULL) { + if (!(bp->port.supported[cfg_idx] & + SUPPORTED_100baseT_Full)) { + DP(BNX2X_MSG_ETHTOOL, + "100M full not supported\n"); + return -EINVAL; + } + + advertising = (ADVERTISED_100baseT_Full | + ADVERTISED_TP); + } else { + if (!(bp->port.supported[cfg_idx] & + SUPPORTED_100baseT_Half)) { + DP(BNX2X_MSG_ETHTOOL, + "100M half not supported\n"); + return -EINVAL; + } + + advertising = (ADVERTISED_100baseT_Half | + ADVERTISED_TP); + } + break; + + case SPEED_1000: + if (duplex != DUPLEX_FULL) { + DP(BNX2X_MSG_ETHTOOL, + "1G half not supported\n"); + return -EINVAL; + } + + if (bp->port.supported[cfg_idx] & + SUPPORTED_1000baseT_Full) { + advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + + } else if (bp->port.supported[cfg_idx] & + SUPPORTED_1000baseKX_Full) { + advertising = ADVERTISED_1000baseKX_Full; + } else { + DP(BNX2X_MSG_ETHTOOL, + "1G full not supported\n"); + return -EINVAL; + } + + break; + + case SPEED_2500: + if (duplex != DUPLEX_FULL) { + DP(BNX2X_MSG_ETHTOOL, + "2.5G half not supported\n"); + return -EINVAL; + } + + if (!(bp->port.supported[cfg_idx] + & SUPPORTED_2500baseX_Full)) { + DP(BNX2X_MSG_ETHTOOL, + "2.5G full not supported\n"); + return -EINVAL; + } + + advertising = (ADVERTISED_2500baseX_Full | + ADVERTISED_TP); + break; + + case SPEED_10000: + if (duplex != DUPLEX_FULL) { + DP(BNX2X_MSG_ETHTOOL, + "10G half not supported\n"); + return -EINVAL; + } + phy_idx = bnx2x_get_cur_phy_idx(bp); + if ((bp->port.supported[cfg_idx] & + SUPPORTED_10000baseT_Full) && + (bp->link_params.phy[phy_idx].media_type != + ETH_PHY_SFP_1G_FIBER)) { + advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + } else if (bp->port.supported[cfg_idx] & + SUPPORTED_10000baseKR_Full) { + advertising = (ADVERTISED_10000baseKR_Full | + ADVERTISED_FIBRE); + } else { + DP(BNX2X_MSG_ETHTOOL, + "10G full not supported\n"); + return -EINVAL; + } + + break; + + default: + DP(BNX2X_MSG_ETHTOOL, "Unsupported speed %u\n", speed); + return -EINVAL; + } + + bp->link_params.req_line_speed[cfg_idx] = speed; + bp->link_params.req_duplex[cfg_idx] = duplex; + bp->port.advertising[cfg_idx] = advertising; + } + + DP(BNX2X_MSG_ETHTOOL, "req_line_speed %d\n" + " req_duplex %d advertising 0x%x\n", + bp->link_params.req_line_speed[cfg_idx], + bp->link_params.req_duplex[cfg_idx], + bp->port.advertising[cfg_idx]); + + /* Set new config */ + bp->link_params.multi_phy_config = new_multi_phy_config; + if (netif_running(dev)) { + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_force_link_reset(bp); + bnx2x_link_set(bp); + } + + return 0; +} + +#define DUMP_ALL_PRESETS 0x1FFF +#define DUMP_MAX_PRESETS 13 + +static int __bnx2x_get_preset_regs_len(struct bnx2x *bp, u32 preset) +{ + if (CHIP_IS_E1(bp)) + return dump_num_registers[0][preset-1]; + else if (CHIP_IS_E1H(bp)) + return dump_num_registers[1][preset-1]; + else if (CHIP_IS_E2(bp)) + return dump_num_registers[2][preset-1]; + else if (CHIP_IS_E3A0(bp)) + return dump_num_registers[3][preset-1]; + else if (CHIP_IS_E3B0(bp)) + return dump_num_registers[4][preset-1]; + else + return 0; +} + +static int __bnx2x_get_regs_len(struct bnx2x *bp) +{ + u32 preset_idx; + int regdump_len = 0; + + /* Calculate the total preset regs length */ + for (preset_idx = 1; preset_idx <= DUMP_MAX_PRESETS; preset_idx++) + regdump_len += __bnx2x_get_preset_regs_len(bp, preset_idx); + + return regdump_len; +} + +static int bnx2x_get_regs_len(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + int regdump_len = 0; + + if (IS_VF(bp)) + return 0; + + regdump_len = __bnx2x_get_regs_len(bp); + regdump_len *= 4; + regdump_len += sizeof(struct dump_header); + + return regdump_len; +} + +#define IS_E1_REG(chips) ((chips & DUMP_CHIP_E1) == DUMP_CHIP_E1) +#define IS_E1H_REG(chips) ((chips & DUMP_CHIP_E1H) == DUMP_CHIP_E1H) +#define IS_E2_REG(chips) ((chips & DUMP_CHIP_E2) == DUMP_CHIP_E2) +#define IS_E3A0_REG(chips) ((chips & DUMP_CHIP_E3A0) == DUMP_CHIP_E3A0) +#define IS_E3B0_REG(chips) ((chips & DUMP_CHIP_E3B0) == DUMP_CHIP_E3B0) + +#define IS_REG_IN_PRESET(presets, idx) \ + ((presets & (1 << (idx-1))) == (1 << (idx-1))) + +/******* Paged registers info selectors ********/ +static const u32 *__bnx2x_get_page_addr_ar(struct bnx2x *bp) +{ + if (CHIP_IS_E2(bp)) + return page_vals_e2; + else if (CHIP_IS_E3(bp)) + return page_vals_e3; + else + return NULL; +} + +static u32 __bnx2x_get_page_reg_num(struct bnx2x *bp) +{ + if (CHIP_IS_E2(bp)) + return PAGE_MODE_VALUES_E2; + else if (CHIP_IS_E3(bp)) + return PAGE_MODE_VALUES_E3; + else + return 0; +} + +static const u32 *__bnx2x_get_page_write_ar(struct bnx2x *bp) +{ + if (CHIP_IS_E2(bp)) + return page_write_regs_e2; + else if (CHIP_IS_E3(bp)) + return page_write_regs_e3; + else + return NULL; +} + +static u32 __bnx2x_get_page_write_num(struct bnx2x *bp) +{ + if (CHIP_IS_E2(bp)) + return PAGE_WRITE_REGS_E2; + else if (CHIP_IS_E3(bp)) + return PAGE_WRITE_REGS_E3; + else + return 0; +} + +static const struct reg_addr *__bnx2x_get_page_read_ar(struct bnx2x *bp) +{ + if (CHIP_IS_E2(bp)) + return page_read_regs_e2; + else if (CHIP_IS_E3(bp)) + return page_read_regs_e3; + else + return NULL; +} + +static u32 __bnx2x_get_page_read_num(struct bnx2x *bp) +{ + if (CHIP_IS_E2(bp)) + return PAGE_READ_REGS_E2; + else if (CHIP_IS_E3(bp)) + return PAGE_READ_REGS_E3; + else + return 0; +} + +static bool bnx2x_is_reg_in_chip(struct bnx2x *bp, + const struct reg_addr *reg_info) +{ + if (CHIP_IS_E1(bp)) + return IS_E1_REG(reg_info->chips); + else if (CHIP_IS_E1H(bp)) + return IS_E1H_REG(reg_info->chips); + else if (CHIP_IS_E2(bp)) + return IS_E2_REG(reg_info->chips); + else if (CHIP_IS_E3A0(bp)) + return IS_E3A0_REG(reg_info->chips); + else if (CHIP_IS_E3B0(bp)) + return IS_E3B0_REG(reg_info->chips); + else + return false; +} + +static bool bnx2x_is_wreg_in_chip(struct bnx2x *bp, + const struct wreg_addr *wreg_info) +{ + if (CHIP_IS_E1(bp)) + return IS_E1_REG(wreg_info->chips); + else if (CHIP_IS_E1H(bp)) + return IS_E1H_REG(wreg_info->chips); + else if (CHIP_IS_E2(bp)) + return IS_E2_REG(wreg_info->chips); + else if (CHIP_IS_E3A0(bp)) + return IS_E3A0_REG(wreg_info->chips); + else if (CHIP_IS_E3B0(bp)) + return IS_E3B0_REG(wreg_info->chips); + else + return false; +} + +/** + * bnx2x_read_pages_regs - read "paged" registers + * + * @bp device handle + * @p output buffer + * + * Reads "paged" memories: memories that may only be read by first writing to a + * specific address ("write address") and then reading from a specific address + * ("read address"). There may be more than one write address per "page" and + * more than one read address per write address. + */ +static void bnx2x_read_pages_regs(struct bnx2x *bp, u32 *p, u32 preset) +{ + u32 i, j, k, n; + + /* addresses of the paged registers */ + const u32 *page_addr = __bnx2x_get_page_addr_ar(bp); + /* number of paged registers */ + int num_pages = __bnx2x_get_page_reg_num(bp); + /* write addresses */ + const u32 *write_addr = __bnx2x_get_page_write_ar(bp); + /* number of write addresses */ + int write_num = __bnx2x_get_page_write_num(bp); + /* read addresses info */ + const struct reg_addr *read_addr = __bnx2x_get_page_read_ar(bp); + /* number of read addresses */ + int read_num = __bnx2x_get_page_read_num(bp); + u32 addr, size; + + for (i = 0; i < num_pages; i++) { + for (j = 0; j < write_num; j++) { + REG_WR(bp, write_addr[j], page_addr[i]); + + for (k = 0; k < read_num; k++) { + if (IS_REG_IN_PRESET(read_addr[k].presets, + preset)) { + size = read_addr[k].size; + for (n = 0; n < size; n++) { + addr = read_addr[k].addr + n*4; + *p++ = REG_RD(bp, addr); + } + } + } + } + } +} + +static int __bnx2x_get_preset_regs(struct bnx2x *bp, u32 *p, u32 preset) +{ + u32 i, j, addr; + const struct wreg_addr *wreg_addr_p = NULL; + + if (CHIP_IS_E1(bp)) + wreg_addr_p = &wreg_addr_e1; + else if (CHIP_IS_E1H(bp)) + wreg_addr_p = &wreg_addr_e1h; + else if (CHIP_IS_E2(bp)) + wreg_addr_p = &wreg_addr_e2; + else if (CHIP_IS_E3A0(bp)) + wreg_addr_p = &wreg_addr_e3; + else if (CHIP_IS_E3B0(bp)) + wreg_addr_p = &wreg_addr_e3b0; + + /* Read the idle_chk registers */ + for (i = 0; i < IDLE_REGS_COUNT; i++) { + if (bnx2x_is_reg_in_chip(bp, &idle_reg_addrs[i]) && + IS_REG_IN_PRESET(idle_reg_addrs[i].presets, preset)) { + for (j = 0; j < idle_reg_addrs[i].size; j++) + *p++ = REG_RD(bp, idle_reg_addrs[i].addr + j*4); + } + } + + /* Read the regular registers */ + for (i = 0; i < REGS_COUNT; i++) { + if (bnx2x_is_reg_in_chip(bp, ®_addrs[i]) && + IS_REG_IN_PRESET(reg_addrs[i].presets, preset)) { + for (j = 0; j < reg_addrs[i].size; j++) + *p++ = REG_RD(bp, reg_addrs[i].addr + j*4); + } + } + + /* Read the CAM registers */ + if (bnx2x_is_wreg_in_chip(bp, wreg_addr_p) && + IS_REG_IN_PRESET(wreg_addr_p->presets, preset)) { + for (i = 0; i < wreg_addr_p->size; i++) { + *p++ = REG_RD(bp, wreg_addr_p->addr + i*4); + + /* In case of wreg_addr register, read additional + registers from read_regs array + */ + for (j = 0; j < wreg_addr_p->read_regs_count; j++) { + addr = *(wreg_addr_p->read_regs); + *p++ = REG_RD(bp, addr + j*4); + } + } + } + + /* Paged registers are supported in E2 & E3 only */ + if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp)) { + /* Read "paged" registers */ + bnx2x_read_pages_regs(bp, p, preset); + } + + return 0; +} + +static void __bnx2x_get_regs(struct bnx2x *bp, u32 *p) +{ + u32 preset_idx; + + /* Read all registers, by reading all preset registers */ + for (preset_idx = 1; preset_idx <= DUMP_MAX_PRESETS; preset_idx++) { + /* Skip presets with IOR */ + if ((preset_idx == 2) || + (preset_idx == 5) || + (preset_idx == 8) || + (preset_idx == 11)) + continue; + __bnx2x_get_preset_regs(bp, p, preset_idx); + p += __bnx2x_get_preset_regs_len(bp, preset_idx); + } +} + +static void bnx2x_get_regs(struct net_device *dev, + struct ethtool_regs *regs, void *_p) +{ + u32 *p = _p; + struct bnx2x *bp = netdev_priv(dev); + struct dump_header dump_hdr = {0}; + + regs->version = 2; + memset(p, 0, regs->len); + + if (!netif_running(bp->dev)) + return; + + /* Disable parity attentions as long as following dump may + * cause false alarms by reading never written registers. We + * will re-enable parity attentions right after the dump. + */ + + bnx2x_disable_blocks_parity(bp); + + dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; + dump_hdr.preset = DUMP_ALL_PRESETS; + dump_hdr.version = BNX2X_DUMP_VERSION; + + /* dump_meta_data presents OR of CHIP and PATH. */ + if (CHIP_IS_E1(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1; + } else if (CHIP_IS_E1H(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1H; + } else if (CHIP_IS_E2(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E2 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3A0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3A0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3B0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3B0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } + + memcpy(p, &dump_hdr, sizeof(struct dump_header)); + p += dump_hdr.header_size + 1; + + /* This isn't really an error, but since attention handling is going + * to print the GRC timeouts using this macro, we use the same. + */ + BNX2X_ERR("Generating register dump. Might trigger harmless GRC timeouts\n"); + + /* Actually read the registers */ + __bnx2x_get_regs(bp, p); + + /* Re-enable parity attentions */ + bnx2x_clear_blocks_parity(bp); + bnx2x_enable_blocks_parity(bp); +} + +static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset) +{ + struct bnx2x *bp = netdev_priv(dev); + int regdump_len = 0; + + regdump_len = __bnx2x_get_preset_regs_len(bp, preset); + regdump_len *= 4; + regdump_len += sizeof(struct dump_header); + + return regdump_len; +} + +static int bnx2x_set_dump(struct net_device *dev, struct ethtool_dump *val) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* Use the ethtool_dump "flag" field as the dump preset index */ + if (val->flag < 1 || val->flag > DUMP_MAX_PRESETS) + return -EINVAL; + + bp->dump_preset_idx = val->flag; + return 0; +} + +static int bnx2x_get_dump_flag(struct net_device *dev, + struct ethtool_dump *dump) +{ + struct bnx2x *bp = netdev_priv(dev); + + dump->version = BNX2X_DUMP_VERSION; + dump->flag = bp->dump_preset_idx; + /* Calculate the requested preset idx length */ + dump->len = bnx2x_get_preset_regs_len(dev, bp->dump_preset_idx); + DP(BNX2X_MSG_ETHTOOL, "Get dump preset %d length=%d\n", + bp->dump_preset_idx, dump->len); + return 0; +} + +static int bnx2x_get_dump_data(struct net_device *dev, + struct ethtool_dump *dump, + void *buffer) +{ + u32 *p = buffer; + struct bnx2x *bp = netdev_priv(dev); + struct dump_header dump_hdr = {0}; + + /* Disable parity attentions as long as following dump may + * cause false alarms by reading never written registers. We + * will re-enable parity attentions right after the dump. + */ + + bnx2x_disable_blocks_parity(bp); + + dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; + dump_hdr.preset = bp->dump_preset_idx; + dump_hdr.version = BNX2X_DUMP_VERSION; + + DP(BNX2X_MSG_ETHTOOL, "Get dump data of preset %d\n", dump_hdr.preset); + + /* dump_meta_data presents OR of CHIP and PATH. */ + if (CHIP_IS_E1(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1; + } else if (CHIP_IS_E1H(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E1H; + } else if (CHIP_IS_E2(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E2 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3A0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3A0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } else if (CHIP_IS_E3B0(bp)) { + dump_hdr.dump_meta_data = DUMP_CHIP_E3B0 | + (BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0); + } + + memcpy(p, &dump_hdr, sizeof(struct dump_header)); + p += dump_hdr.header_size + 1; + + /* Actually read the registers */ + __bnx2x_get_preset_regs(bp, p, dump_hdr.preset); + + /* Re-enable parity attentions */ + bnx2x_clear_blocks_parity(bp); + bnx2x_enable_blocks_parity(bp); + + return 0; +} + +static void bnx2x_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct bnx2x *bp = netdev_priv(dev); + + strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); + + bnx2x_fill_fw_str(bp, info->fw_version, sizeof(info->fw_version)); + + strlcpy(info->bus_info, pci_name(bp->pdev), sizeof(info->bus_info)); +} + +static void bnx2x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->flags & NO_WOL_FLAG) { + wol->supported = 0; + wol->wolopts = 0; + } else { + wol->supported = WAKE_MAGIC; + if (bp->wol) + wol->wolopts = WAKE_MAGIC; + else + wol->wolopts = 0; + } + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static int bnx2x_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (wol->wolopts & ~WAKE_MAGIC) { + DP(BNX2X_MSG_ETHTOOL, "WOL not supported\n"); + return -EINVAL; + } + + if (wol->wolopts & WAKE_MAGIC) { + if (bp->flags & NO_WOL_FLAG) { + DP(BNX2X_MSG_ETHTOOL, "WOL not supported\n"); + return -EINVAL; + } + bp->wol = 1; + } else + bp->wol = 0; + + if (SHMEM2_HAS(bp, curr_cfg)) + SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS); + + return 0; +} + +static u32 bnx2x_get_msglevel(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + return bp->msg_enable; +} + +static void bnx2x_set_msglevel(struct net_device *dev, u32 level) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (capable(CAP_NET_ADMIN)) { + /* dump MCP trace */ + if (IS_PF(bp) && (level & BNX2X_MSG_MCP)) + bnx2x_fw_dump_lvl(bp, KERN_INFO); + bp->msg_enable = level; + } +} + +static int bnx2x_nway_reset(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (!bp->port.pmf) + return 0; + + if (netif_running(dev)) { + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_force_link_reset(bp); + bnx2x_link_set(bp); + } + + return 0; +} + +static u32 bnx2x_get_link(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->flags & MF_FUNC_DIS || (bp->state != BNX2X_STATE_OPEN)) + return 0; + + if (IS_VF(bp)) + return !test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &bp->vf_link_vars.link_report_flags); + + return bp->link_vars.link_up; +} + +static int bnx2x_get_eeprom_len(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + return bp->common.flash_size; +} + +/* Per pf misc lock must be acquired before the per port mcp lock. Otherwise, + * had we done things the other way around, if two pfs from the same port would + * attempt to access nvram at the same time, we could run into a scenario such + * as: + * pf A takes the port lock. + * pf B succeeds in taking the same lock since they are from the same port. + * pf A takes the per pf misc lock. Performs eeprom access. + * pf A finishes. Unlocks the per pf misc lock. + * Pf B takes the lock and proceeds to perform it's own access. + * pf A unlocks the per port lock, while pf B is still working (!). + * mcp takes the per port lock and corrupts pf B's access (and/or has it's own + * access corrupted by pf B) + */ +static int bnx2x_acquire_nvram_lock(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int count, i; + u32 val; + + /* acquire HW lock: protect against other PFs in PF Direct Assignment */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM); + + /* adjust timeout for emulation/FPGA */ + count = BNX2X_NVRAM_TIMEOUT_COUNT; + if (CHIP_REV_IS_SLOW(bp)) + count *= 100; + + /* request access to nvram interface */ + REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, + (MCPR_NVM_SW_ARB_ARB_REQ_SET1 << port)); + + for (i = 0; i < count*10; i++) { + val = REG_RD(bp, MCP_REG_MCPR_NVM_SW_ARB); + if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) + break; + + udelay(5); + } + + if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot get access to nvram interface\n"); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM); + return -EBUSY; + } + + return 0; +} + +static int bnx2x_release_nvram_lock(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int count, i; + u32 val; + + /* adjust timeout for emulation/FPGA */ + count = BNX2X_NVRAM_TIMEOUT_COUNT; + if (CHIP_REV_IS_SLOW(bp)) + count *= 100; + + /* relinquish nvram interface */ + REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, + (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << port)); + + for (i = 0; i < count*10; i++) { + val = REG_RD(bp, MCP_REG_MCPR_NVM_SW_ARB); + if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) + break; + + udelay(5); + } + + if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot free access to nvram interface\n"); + return -EBUSY; + } + + /* release HW lock: protect against other PFs in PF Direct Assignment */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM); + return 0; +} + +static void bnx2x_enable_nvram_access(struct bnx2x *bp) +{ + u32 val; + + val = REG_RD(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE); + + /* enable both bits, even on read */ + REG_WR(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE, + (val | MCPR_NVM_ACCESS_ENABLE_EN | + MCPR_NVM_ACCESS_ENABLE_WR_EN)); +} + +static void bnx2x_disable_nvram_access(struct bnx2x *bp) +{ + u32 val; + + val = REG_RD(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE); + + /* disable both bits, even after read */ + REG_WR(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE, + (val & ~(MCPR_NVM_ACCESS_ENABLE_EN | + MCPR_NVM_ACCESS_ENABLE_WR_EN))); +} + +static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, __be32 *ret_val, + u32 cmd_flags) +{ + int count, i, rc; + u32 val; + + /* build the command word */ + cmd_flags |= MCPR_NVM_COMMAND_DOIT; + + /* need to clear DONE bit separately */ + REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE); + + /* address of the NVRAM to read from */ + REG_WR(bp, MCP_REG_MCPR_NVM_ADDR, + (offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE)); + + /* issue a read command */ + REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, cmd_flags); + + /* adjust timeout for emulation/FPGA */ + count = BNX2X_NVRAM_TIMEOUT_COUNT; + if (CHIP_REV_IS_SLOW(bp)) + count *= 100; + + /* wait for completion */ + *ret_val = 0; + rc = -EBUSY; + for (i = 0; i < count; i++) { + udelay(5); + val = REG_RD(bp, MCP_REG_MCPR_NVM_COMMAND); + + if (val & MCPR_NVM_COMMAND_DONE) { + val = REG_RD(bp, MCP_REG_MCPR_NVM_READ); + /* we read nvram data in cpu order + * but ethtool sees it as an array of bytes + * converting to big-endian will do the work + */ + *ret_val = cpu_to_be32(val); + rc = 0; + break; + } + } + if (rc == -EBUSY) + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "nvram read timeout expired\n"); + return rc; +} + +int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf, + int buf_size) +{ + int rc; + u32 cmd_flags; + __be32 val; + + if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Invalid parameter: offset 0x%x buf_size 0x%x\n", + offset, buf_size); + return -EINVAL; + } + + if (offset + buf_size > bp->common.flash_size) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Invalid parameter: offset (0x%x) + buf_size (0x%x) > flash_size (0x%x)\n", + offset, buf_size, bp->common.flash_size); + return -EINVAL; + } + + /* request access to nvram interface */ + rc = bnx2x_acquire_nvram_lock(bp); + if (rc) + return rc; + + /* enable access to nvram interface */ + bnx2x_enable_nvram_access(bp); + + /* read the first word(s) */ + cmd_flags = MCPR_NVM_COMMAND_FIRST; + while ((buf_size > sizeof(u32)) && (rc == 0)) { + rc = bnx2x_nvram_read_dword(bp, offset, &val, cmd_flags); + memcpy(ret_buf, &val, 4); + + /* advance to the next dword */ + offset += sizeof(u32); + ret_buf += sizeof(u32); + buf_size -= sizeof(u32); + cmd_flags = 0; + } + + if (rc == 0) { + cmd_flags |= MCPR_NVM_COMMAND_LAST; + rc = bnx2x_nvram_read_dword(bp, offset, &val, cmd_flags); + memcpy(ret_buf, &val, 4); + } + + /* disable access to nvram interface */ + bnx2x_disable_nvram_access(bp); + bnx2x_release_nvram_lock(bp); + + return rc; +} + +static int bnx2x_nvram_read32(struct bnx2x *bp, u32 offset, u32 *buf, + int buf_size) +{ + int rc; + + rc = bnx2x_nvram_read(bp, offset, (u8 *)buf, buf_size); + + if (!rc) { + __be32 *be = (__be32 *)buf; + + while ((buf_size -= 4) >= 0) + *buf++ = be32_to_cpu(*be++); + } + + return rc; +} + +static bool bnx2x_is_nvm_accessible(struct bnx2x *bp) +{ + int rc = 1; + u16 pm = 0; + struct net_device *dev = pci_get_drvdata(bp->pdev); + + if (bp->pdev->pm_cap) + rc = pci_read_config_word(bp->pdev, + bp->pdev->pm_cap + PCI_PM_CTRL, &pm); + + if ((rc && !netif_running(dev)) || + (!rc && ((pm & PCI_PM_CTRL_STATE_MASK) != (__force u16)PCI_D0))) + return false; + + return true; +} + +static int bnx2x_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *eebuf) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return -EAGAIN; + } + + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" + " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", + eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset, + eeprom->len, eeprom->len); + + /* parameters already validated in ethtool_get_eeprom */ + + return bnx2x_nvram_read(bp, eeprom->offset, eebuf, eeprom->len); +} + +static int bnx2x_get_module_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, + u8 *data) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc = -EINVAL, phy_idx; + u8 *user_data = data; + unsigned int start_addr = ee->offset, xfer_size = 0; + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return -EAGAIN; + } + + phy_idx = bnx2x_get_cur_phy_idx(bp); + + /* Read A0 section */ + if (start_addr < ETH_MODULE_SFF_8079_LEN) { + /* Limit transfer size to the A0 section boundary */ + if (start_addr + ee->len > ETH_MODULE_SFF_8079_LEN) + xfer_size = ETH_MODULE_SFF_8079_LEN - start_addr; + else + xfer_size = ee->len; + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A0, + start_addr, + xfer_size, + user_data); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading A0 section\n"); + + return -EINVAL; + } + user_data += xfer_size; + start_addr += xfer_size; + } + + /* Read A2 section */ + if ((start_addr >= ETH_MODULE_SFF_8079_LEN) && + (start_addr < ETH_MODULE_SFF_8472_LEN)) { + xfer_size = ee->len - xfer_size; + /* Limit transfer size to the A2 section boundary */ + if (start_addr + xfer_size > ETH_MODULE_SFF_8472_LEN) + xfer_size = ETH_MODULE_SFF_8472_LEN - start_addr; + start_addr -= ETH_MODULE_SFF_8079_LEN; + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A2, + start_addr, + xfer_size, + user_data); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading A2 section\n"); + return -EINVAL; + } + } + return rc; +} + +static int bnx2x_get_module_info(struct net_device *dev, + struct ethtool_modinfo *modinfo) +{ + struct bnx2x *bp = netdev_priv(dev); + int phy_idx, rc; + u8 sff8472_comp, diag_type; + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return -EAGAIN; + } + phy_idx = bnx2x_get_cur_phy_idx(bp); + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_SFF_8472_COMP_ADDR, + SFP_EEPROM_SFF_8472_COMP_SIZE, + &sff8472_comp); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading SFF-8472 comp field\n"); + return -EINVAL; + } + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_DIAG_TYPE_ADDR, + SFP_EEPROM_DIAG_TYPE_SIZE, + &diag_type); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading Diag Type field\n"); + return -EINVAL; + } + + if (!sff8472_comp || + (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ) || + !(diag_type & SFP_EEPROM_DDM_IMPLEMENTED)) { + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } else { + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } + return 0; +} + +static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, + u32 cmd_flags) +{ + int count, i, rc; + + /* build the command word */ + cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR; + + /* need to clear DONE bit separately */ + REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE); + + /* write the data */ + REG_WR(bp, MCP_REG_MCPR_NVM_WRITE, val); + + /* address of the NVRAM to write to */ + REG_WR(bp, MCP_REG_MCPR_NVM_ADDR, + (offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE)); + + /* issue the write command */ + REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, cmd_flags); + + /* adjust timeout for emulation/FPGA */ + count = BNX2X_NVRAM_TIMEOUT_COUNT; + if (CHIP_REV_IS_SLOW(bp)) + count *= 100; + + /* wait for completion */ + rc = -EBUSY; + for (i = 0; i < count; i++) { + udelay(5); + val = REG_RD(bp, MCP_REG_MCPR_NVM_COMMAND); + if (val & MCPR_NVM_COMMAND_DONE) { + rc = 0; + break; + } + } + + if (rc == -EBUSY) + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "nvram write timeout expired\n"); + return rc; +} + +#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) + +static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, + int buf_size) +{ + int rc; + u32 cmd_flags, align_offset, val; + __be32 val_be; + + if (offset + buf_size > bp->common.flash_size) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Invalid parameter: offset (0x%x) + buf_size (0x%x) > flash_size (0x%x)\n", + offset, buf_size, bp->common.flash_size); + return -EINVAL; + } + + /* request access to nvram interface */ + rc = bnx2x_acquire_nvram_lock(bp); + if (rc) + return rc; + + /* enable access to nvram interface */ + bnx2x_enable_nvram_access(bp); + + cmd_flags = (MCPR_NVM_COMMAND_FIRST | MCPR_NVM_COMMAND_LAST); + align_offset = (offset & ~0x03); + rc = bnx2x_nvram_read_dword(bp, align_offset, &val_be, cmd_flags); + + if (rc == 0) { + /* nvram data is returned as an array of bytes + * convert it back to cpu order + */ + val = be32_to_cpu(val_be); + + val &= ~le32_to_cpu((__force __le32) + (0xff << BYTE_OFFSET(offset))); + val |= le32_to_cpu((__force __le32) + (*data_buf << BYTE_OFFSET(offset))); + + rc = bnx2x_nvram_write_dword(bp, align_offset, val, + cmd_flags); + } + + /* disable access to nvram interface */ + bnx2x_disable_nvram_access(bp); + bnx2x_release_nvram_lock(bp); + + return rc; +} + +static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf, + int buf_size) +{ + int rc; + u32 cmd_flags; + u32 val; + u32 written_so_far; + + if (buf_size == 1) /* ethtool */ + return bnx2x_nvram_write1(bp, offset, data_buf, buf_size); + + if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Invalid parameter: offset 0x%x buf_size 0x%x\n", + offset, buf_size); + return -EINVAL; + } + + if (offset + buf_size > bp->common.flash_size) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Invalid parameter: offset (0x%x) + buf_size (0x%x) > flash_size (0x%x)\n", + offset, buf_size, bp->common.flash_size); + return -EINVAL; + } + + /* request access to nvram interface */ + rc = bnx2x_acquire_nvram_lock(bp); + if (rc) + return rc; + + /* enable access to nvram interface */ + bnx2x_enable_nvram_access(bp); + + written_so_far = 0; + cmd_flags = MCPR_NVM_COMMAND_FIRST; + while ((written_so_far < buf_size) && (rc == 0)) { + if (written_so_far == (buf_size - sizeof(u32))) + cmd_flags |= MCPR_NVM_COMMAND_LAST; + else if (((offset + 4) % BNX2X_NVRAM_PAGE_SIZE) == 0) + cmd_flags |= MCPR_NVM_COMMAND_LAST; + else if ((offset % BNX2X_NVRAM_PAGE_SIZE) == 0) + cmd_flags |= MCPR_NVM_COMMAND_FIRST; + + memcpy(&val, data_buf, 4); + + /* Notice unlike bnx2x_nvram_read_dword() this will not + * change val using be32_to_cpu(), which causes data to flip + * if the eeprom is read and then written back. This is due + * to tools utilizing this functionality that would break + * if this would be resolved. + */ + rc = bnx2x_nvram_write_dword(bp, offset, val, cmd_flags); + + /* advance to the next dword */ + offset += sizeof(u32); + data_buf += sizeof(u32); + written_so_far += sizeof(u32); + + /* At end of each 4Kb page, release nvram lock to allow MFW + * chance to take it for its own use. + */ + if ((cmd_flags & MCPR_NVM_COMMAND_LAST) && + (written_so_far < buf_size)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Releasing NVM lock after offset 0x%x\n", + (u32)(offset - sizeof(u32))); + bnx2x_release_nvram_lock(bp); + usleep_range(1000, 2000); + rc = bnx2x_acquire_nvram_lock(bp); + if (rc) + return rc; + } + + cmd_flags = 0; + } + + /* disable access to nvram interface */ + bnx2x_disable_nvram_access(bp); + bnx2x_release_nvram_lock(bp); + + return rc; +} + +static int bnx2x_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *eebuf) +{ + struct bnx2x *bp = netdev_priv(dev); + int port = BP_PORT(bp); + int rc = 0; + u32 ext_phy_config; + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return -EAGAIN; + } + + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" + " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", + eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset, + eeprom->len, eeprom->len); + + /* parameters already validated in ethtool_set_eeprom */ + + /* PHY eeprom can be accessed only by the PMF */ + if ((eeprom->magic >= 0x50485900) && (eeprom->magic <= 0x504859FF) && + !bp->port.pmf) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "wrong magic or interface is not pmf\n"); + return -EINVAL; + } + + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + + if (eeprom->magic == 0x50485950) { + /* 'PHYP' (0x50485950): prepare phy for FW upgrade */ + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + bnx2x_acquire_phy_lock(bp); + rc |= bnx2x_link_reset(&bp->link_params, + &bp->link_vars, 0); + if (XGXS_EXT_PHY_TYPE(ext_phy_config) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_HIGH, port); + bnx2x_release_phy_lock(bp); + bnx2x_link_report(bp); + + } else if (eeprom->magic == 0x50485952) { + /* 'PHYR' (0x50485952): re-init link after FW upgrade */ + if (bp->state == BNX2X_STATE_OPEN) { + bnx2x_acquire_phy_lock(bp); + rc |= bnx2x_link_reset(&bp->link_params, + &bp->link_vars, 1); + + rc |= bnx2x_phy_init(&bp->link_params, + &bp->link_vars); + bnx2x_release_phy_lock(bp); + bnx2x_calc_fc_adv(bp); + } + } else if (eeprom->magic == 0x53985943) { + /* 'PHYC' (0x53985943): PHY FW upgrade completed */ + if (XGXS_EXT_PHY_TYPE(ext_phy_config) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) { + + /* DSP Remove Download Mode */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_LOW, port); + + bnx2x_acquire_phy_lock(bp); + + bnx2x_sfx7101_sp_sw_reset(bp, + &bp->link_params.phy[EXT_PHY1]); + + /* wait 0.5 sec to allow it to run */ + msleep(500); + bnx2x_ext_phy_hw_reset(bp, port); + msleep(500); + bnx2x_release_phy_lock(bp); + } + } else + rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int bnx2x_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *coal) +{ + struct bnx2x *bp = netdev_priv(dev); + + memset(coal, 0, sizeof(struct ethtool_coalesce)); + + coal->rx_coalesce_usecs = bp->rx_ticks; + coal->tx_coalesce_usecs = bp->tx_ticks; + + return 0; +} + +static int bnx2x_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coal) +{ + struct bnx2x *bp = netdev_priv(dev); + + bp->rx_ticks = (u16)coal->rx_coalesce_usecs; + if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT) + bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT; + + bp->tx_ticks = (u16)coal->tx_coalesce_usecs; + if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT) + bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT; + + if (netif_running(dev)) + bnx2x_update_coalesce(bp); + + return 0; +} + +static void bnx2x_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *ering) +{ + struct bnx2x *bp = netdev_priv(dev); + + ering->rx_max_pending = MAX_RX_AVAIL; + + /* If size isn't already set, we give an estimation of the number + * of buffers we'll have. We're neglecting some possible conditions + * [we couldn't know for certain at this point if number of queues + * might shrink] but the number would be correct for the likely + * scenario. + */ + if (bp->rx_ring_size) + ering->rx_pending = bp->rx_ring_size; + else if (BNX2X_NUM_RX_QUEUES(bp)) + ering->rx_pending = MAX_RX_AVAIL / BNX2X_NUM_RX_QUEUES(bp); + else + ering->rx_pending = MAX_RX_AVAIL; + + ering->tx_max_pending = IS_MF_FCOE_AFEX(bp) ? 0 : MAX_TX_AVAIL; + ering->tx_pending = bp->tx_ring_size; +} + +static int bnx2x_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *ering) +{ + struct bnx2x *bp = netdev_priv(dev); + + DP(BNX2X_MSG_ETHTOOL, + "set ring params command parameters: rx_pending = %d, tx_pending = %d\n", + ering->rx_pending, ering->tx_pending); + + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, + "VFs are enabled, can not change ring parameters\n"); + return -EPERM; + } + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + DP(BNX2X_MSG_ETHTOOL, + "Handling parity error recovery. Try again later\n"); + return -EAGAIN; + } + + if ((ering->rx_pending > MAX_RX_AVAIL) || + (ering->rx_pending < (bp->disable_tpa ? MIN_RX_SIZE_NONTPA : + MIN_RX_SIZE_TPA)) || + (ering->tx_pending > (IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL)) || + (ering->tx_pending <= MAX_SKB_FRAGS + 4)) { + DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); + return -EINVAL; + } + + bp->rx_ring_size = ering->rx_pending; + bp->tx_ring_size = ering->tx_pending; + + return bnx2x_reload_if_running(dev); +} + +static void bnx2x_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct bnx2x *bp = netdev_priv(dev); + int cfg_idx = bnx2x_get_link_cfg_idx(bp); + int cfg_reg; + + epause->autoneg = (bp->link_params.req_flow_ctrl[cfg_idx] == + BNX2X_FLOW_CTRL_AUTO); + + if (!epause->autoneg) + cfg_reg = bp->link_params.req_flow_ctrl[cfg_idx]; + else + cfg_reg = bp->link_params.req_fc_auto_adv; + + epause->rx_pause = ((cfg_reg & BNX2X_FLOW_CTRL_RX) == + BNX2X_FLOW_CTRL_RX); + epause->tx_pause = ((cfg_reg & BNX2X_FLOW_CTRL_TX) == + BNX2X_FLOW_CTRL_TX); + + DP(BNX2X_MSG_ETHTOOL, "ethtool_pauseparam: cmd %d\n" + " autoneg %d rx_pause %d tx_pause %d\n", + epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); +} + +static int bnx2x_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 cfg_idx = bnx2x_get_link_cfg_idx(bp); + if (IS_MF(bp)) + return 0; + + DP(BNX2X_MSG_ETHTOOL, "ethtool_pauseparam: cmd %d\n" + " autoneg %d rx_pause %d tx_pause %d\n", + epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); + + bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO; + + if (epause->rx_pause) + bp->link_params.req_flow_ctrl[cfg_idx] |= BNX2X_FLOW_CTRL_RX; + + if (epause->tx_pause) + bp->link_params.req_flow_ctrl[cfg_idx] |= BNX2X_FLOW_CTRL_TX; + + if (bp->link_params.req_flow_ctrl[cfg_idx] == BNX2X_FLOW_CTRL_AUTO) + bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_NONE; + + if (epause->autoneg) { + if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) { + DP(BNX2X_MSG_ETHTOOL, "autoneg not supported\n"); + return -EINVAL; + } + + if (bp->link_params.req_line_speed[cfg_idx] == SPEED_AUTO_NEG) { + bp->link_params.req_flow_ctrl[cfg_idx] = + BNX2X_FLOW_CTRL_AUTO; + } + bp->link_params.req_fc_auto_adv = 0; + if (epause->rx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX; + + if (epause->tx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX; + + if (!bp->link_params.req_fc_auto_adv) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_NONE; + } + + DP(BNX2X_MSG_ETHTOOL, + "req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl[cfg_idx]); + + if (netif_running(dev)) { + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_force_link_reset(bp); + bnx2x_link_set(bp); + } + + return 0; +} + +static const char bnx2x_tests_str_arr[BNX2X_NUM_TESTS_SF][ETH_GSTRING_LEN] = { + "register_test (offline) ", + "memory_test (offline) ", + "int_loopback_test (offline)", + "ext_loopback_test (offline)", + "nvram_test (online) ", + "interrupt_test (online) ", + "link_test (online) " +}; + +enum { + BNX2X_PRI_FLAG_ISCSI, + BNX2X_PRI_FLAG_FCOE, + BNX2X_PRI_FLAG_STORAGE, + BNX2X_PRI_FLAG_LEN, +}; + +static const char bnx2x_private_arr[BNX2X_PRI_FLAG_LEN][ETH_GSTRING_LEN] = { + "iSCSI offload support", + "FCoE offload support", + "Storage only interface" +}; + +static u32 bnx2x_eee_to_adv(u32 eee_adv) +{ + u32 modes = 0; + + if (eee_adv & SHMEM_EEE_100M_ADV) + modes |= ADVERTISED_100baseT_Full; + if (eee_adv & SHMEM_EEE_1G_ADV) + modes |= ADVERTISED_1000baseT_Full; + if (eee_adv & SHMEM_EEE_10G_ADV) + modes |= ADVERTISED_10000baseT_Full; + + return modes; +} + +static u32 bnx2x_adv_to_eee(u32 modes, u32 shift) +{ + u32 eee_adv = 0; + if (modes & ADVERTISED_100baseT_Full) + eee_adv |= SHMEM_EEE_100M_ADV; + if (modes & ADVERTISED_1000baseT_Full) + eee_adv |= SHMEM_EEE_1G_ADV; + if (modes & ADVERTISED_10000baseT_Full) + eee_adv |= SHMEM_EEE_10G_ADV; + + return eee_adv << shift; +} + +static int bnx2x_get_eee(struct net_device *dev, struct ethtool_eee *edata) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 eee_cfg; + + if (!SHMEM2_HAS(bp, eee_status[BP_PORT(bp)])) { + DP(BNX2X_MSG_ETHTOOL, "BC Version does not support EEE\n"); + return -EOPNOTSUPP; + } + + eee_cfg = bp->link_vars.eee_status; + + edata->supported = + bnx2x_eee_to_adv((eee_cfg & SHMEM_EEE_SUPPORTED_MASK) >> + SHMEM_EEE_SUPPORTED_SHIFT); + + edata->advertised = + bnx2x_eee_to_adv((eee_cfg & SHMEM_EEE_ADV_STATUS_MASK) >> + SHMEM_EEE_ADV_STATUS_SHIFT); + edata->lp_advertised = + bnx2x_eee_to_adv((eee_cfg & SHMEM_EEE_LP_ADV_STATUS_MASK) >> + SHMEM_EEE_LP_ADV_STATUS_SHIFT); + + /* SHMEM value is in 16u units --> Convert to 1u units. */ + edata->tx_lpi_timer = (eee_cfg & SHMEM_EEE_TIMER_MASK) << 4; + + edata->eee_enabled = (eee_cfg & SHMEM_EEE_REQUESTED_BIT) ? 1 : 0; + edata->eee_active = (eee_cfg & SHMEM_EEE_ACTIVE_BIT) ? 1 : 0; + edata->tx_lpi_enabled = (eee_cfg & SHMEM_EEE_LPI_REQUESTED_BIT) ? 1 : 0; + + return 0; +} + +static int bnx2x_set_eee(struct net_device *dev, struct ethtool_eee *edata) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 eee_cfg; + u32 advertised; + + if (IS_MF(bp)) + return 0; + + if (!SHMEM2_HAS(bp, eee_status[BP_PORT(bp)])) { + DP(BNX2X_MSG_ETHTOOL, "BC Version does not support EEE\n"); + return -EOPNOTSUPP; + } + + eee_cfg = bp->link_vars.eee_status; + + if (!(eee_cfg & SHMEM_EEE_SUPPORTED_MASK)) { + DP(BNX2X_MSG_ETHTOOL, "Board does not support EEE!\n"); + return -EOPNOTSUPP; + } + + advertised = bnx2x_adv_to_eee(edata->advertised, + SHMEM_EEE_ADV_STATUS_SHIFT); + if ((advertised != (eee_cfg & SHMEM_EEE_ADV_STATUS_MASK))) { + DP(BNX2X_MSG_ETHTOOL, + "Direct manipulation of EEE advertisement is not supported\n"); + return -EINVAL; + } + + if (edata->tx_lpi_timer > EEE_MODE_TIMER_MASK) { + DP(BNX2X_MSG_ETHTOOL, + "Maximal Tx Lpi timer supported is %x(u)\n", + EEE_MODE_TIMER_MASK); + return -EINVAL; + } + if (edata->tx_lpi_enabled && + (edata->tx_lpi_timer < EEE_MODE_NVRAM_AGGRESSIVE_TIME)) { + DP(BNX2X_MSG_ETHTOOL, + "Minimal Tx Lpi timer supported is %d(u)\n", + EEE_MODE_NVRAM_AGGRESSIVE_TIME); + return -EINVAL; + } + + /* All is well; Apply changes*/ + if (edata->eee_enabled) + bp->link_params.eee_mode |= EEE_MODE_ADV_LPI; + else + bp->link_params.eee_mode &= ~EEE_MODE_ADV_LPI; + + if (edata->tx_lpi_enabled) + bp->link_params.eee_mode |= EEE_MODE_ENABLE_LPI; + else + bp->link_params.eee_mode &= ~EEE_MODE_ENABLE_LPI; + + bp->link_params.eee_mode &= ~EEE_MODE_TIMER_MASK; + bp->link_params.eee_mode |= (edata->tx_lpi_timer & + EEE_MODE_TIMER_MASK) | + EEE_MODE_OVERRIDE_NVRAM | + EEE_MODE_OUTPUT_TIME; + + /* Restart link to propagate changes */ + if (netif_running(dev)) { + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_force_link_reset(bp); + bnx2x_link_set(bp); + } + + return 0; +} + +enum { + BNX2X_CHIP_E1_OFST = 0, + BNX2X_CHIP_E1H_OFST, + BNX2X_CHIP_E2_OFST, + BNX2X_CHIP_E3_OFST, + BNX2X_CHIP_E3B0_OFST, + BNX2X_CHIP_MAX_OFST +}; + +#define BNX2X_CHIP_MASK_E1 (1 << BNX2X_CHIP_E1_OFST) +#define BNX2X_CHIP_MASK_E1H (1 << BNX2X_CHIP_E1H_OFST) +#define BNX2X_CHIP_MASK_E2 (1 << BNX2X_CHIP_E2_OFST) +#define BNX2X_CHIP_MASK_E3 (1 << BNX2X_CHIP_E3_OFST) +#define BNX2X_CHIP_MASK_E3B0 (1 << BNX2X_CHIP_E3B0_OFST) + +#define BNX2X_CHIP_MASK_ALL ((1 << BNX2X_CHIP_MAX_OFST) - 1) +#define BNX2X_CHIP_MASK_E1X (BNX2X_CHIP_MASK_E1 | BNX2X_CHIP_MASK_E1H) + +static int bnx2x_test_registers(struct bnx2x *bp) +{ + int idx, i, rc = -ENODEV; + u32 wr_val = 0, hw; + int port = BP_PORT(bp); + static const struct { + u32 hw; + u32 offset0; + u32 offset1; + u32 mask; + } reg_tbl[] = { +/* 0 */ { BNX2X_CHIP_MASK_ALL, + BRB1_REG_PAUSE_LOW_THRESHOLD_0, 4, 0x000003ff }, + { BNX2X_CHIP_MASK_ALL, + DORQ_REG_DB_ADDR0, 4, 0xffffffff }, + { BNX2X_CHIP_MASK_E1X, + HC_REG_AGG_INT_0, 4, 0x000003ff }, + { BNX2X_CHIP_MASK_ALL, + PBF_REG_MAC_IF0_ENABLE, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2 | BNX2X_CHIP_MASK_E3, + PBF_REG_P0_INIT_CRD, 4, 0x000007ff }, + { BNX2X_CHIP_MASK_E3B0, + PBF_REG_INIT_CRD_Q0, 4, 0x000007ff }, + { BNX2X_CHIP_MASK_ALL, + PRS_REG_CID_PORT_0, 4, 0x00ffffff }, + { BNX2X_CHIP_MASK_ALL, + PXP2_REG_PSWRQ_CDU0_L2P, 4, 0x000fffff }, + { BNX2X_CHIP_MASK_ALL, + PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR, 8, 0x0003ffff }, + { BNX2X_CHIP_MASK_ALL, + PXP2_REG_PSWRQ_TM0_L2P, 4, 0x000fffff }, +/* 10 */ { BNX2X_CHIP_MASK_ALL, + PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR, 8, 0x0003ffff }, + { BNX2X_CHIP_MASK_ALL, + PXP2_REG_PSWRQ_TSDM0_L2P, 4, 0x000fffff }, + { BNX2X_CHIP_MASK_ALL, + QM_REG_CONNNUM_0, 4, 0x000fffff }, + { BNX2X_CHIP_MASK_ALL, + TM_REG_LIN0_MAX_ACTIVE_CID, 4, 0x0003ffff }, + { BNX2X_CHIP_MASK_ALL, + SRC_REG_KEYRSS0_0, 40, 0xffffffff }, + { BNX2X_CHIP_MASK_ALL, + SRC_REG_KEYRSS0_7, 40, 0xffffffff }, + { BNX2X_CHIP_MASK_ALL, + XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_ALL, + XCM_REG_WU_DA_CNT_CMD00, 4, 0x00000003 }, + { BNX2X_CHIP_MASK_ALL, + XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 4, 0x000000ff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_T_BIT, 4, 0x00000001 }, +/* 20 */ { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2, + NIG_REG_EMAC0_IN_EN, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2, + NIG_REG_BMAC0_IN_EN, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_XCM0_OUT_EN, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_BRB0_OUT_EN, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_XCM_MASK, 4, 0x00000007 }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_ACPI_PAT_6_LEN, 68, 0x000000ff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_ACPI_PAT_0_CRC, 68, 0xffffffff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_DEST_MAC_0_0, 160, 0xffffffff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_DEST_IP_0_1, 160, 0xffffffff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_IPV4_IPV6_0, 160, 0x00000001 }, +/* 30 */ { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_DEST_UDP_0, 160, 0x0000ffff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_DEST_TCP_0, 160, 0x0000ffff }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LLH0_VLAN_ID_0, 160, 0x00000fff }, + { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2, + NIG_REG_XGXS_SERDES0_MODE_SEL, 4, 0x00000001 }, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0, 4, 0x00000001}, + { BNX2X_CHIP_MASK_ALL, + NIG_REG_STATUS_INTERRUPT_PORT0, 4, 0x07ffffff }, + { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2, + NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST, 24, 0x00000001 }, + { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2, + NIG_REG_SERDES0_CTRL_PHY_ADDR, 16, 0x0000001f }, + + { BNX2X_CHIP_MASK_ALL, 0xffffffff, 0, 0x00000000 } + }; + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return rc; + } + + if (CHIP_IS_E1(bp)) + hw = BNX2X_CHIP_MASK_E1; + else if (CHIP_IS_E1H(bp)) + hw = BNX2X_CHIP_MASK_E1H; + else if (CHIP_IS_E2(bp)) + hw = BNX2X_CHIP_MASK_E2; + else if (CHIP_IS_E3B0(bp)) + hw = BNX2X_CHIP_MASK_E3B0; + else /* e3 A0 */ + hw = BNX2X_CHIP_MASK_E3; + + /* Repeat the test twice: + * First by writing 0x00000000, second by writing 0xffffffff + */ + for (idx = 0; idx < 2; idx++) { + + switch (idx) { + case 0: + wr_val = 0; + break; + case 1: + wr_val = 0xffffffff; + break; + } + + for (i = 0; reg_tbl[i].offset0 != 0xffffffff; i++) { + u32 offset, mask, save_val, val; + if (!(hw & reg_tbl[i].hw)) + continue; + + offset = reg_tbl[i].offset0 + port*reg_tbl[i].offset1; + mask = reg_tbl[i].mask; + + save_val = REG_RD(bp, offset); + + REG_WR(bp, offset, wr_val & mask); + + val = REG_RD(bp, offset); + + /* Restore the original register's value */ + REG_WR(bp, offset, save_val); + + /* verify value is as expected */ + if ((val & mask) != (wr_val & mask)) { + DP(BNX2X_MSG_ETHTOOL, + "offset 0x%x: val 0x%x != 0x%x mask 0x%x\n", + offset, val, wr_val, mask); + goto test_reg_exit; + } + } + } + + rc = 0; + +test_reg_exit: + return rc; +} + +static int bnx2x_test_memory(struct bnx2x *bp) +{ + int i, j, rc = -ENODEV; + u32 val, index; + static const struct { + u32 offset; + int size; + } mem_tbl[] = { + { CCM_REG_XX_DESCR_TABLE, CCM_REG_XX_DESCR_TABLE_SIZE }, + { CFC_REG_ACTIVITY_COUNTER, CFC_REG_ACTIVITY_COUNTER_SIZE }, + { CFC_REG_LINK_LIST, CFC_REG_LINK_LIST_SIZE }, + { DMAE_REG_CMD_MEM, DMAE_REG_CMD_MEM_SIZE }, + { TCM_REG_XX_DESCR_TABLE, TCM_REG_XX_DESCR_TABLE_SIZE }, + { UCM_REG_XX_DESCR_TABLE, UCM_REG_XX_DESCR_TABLE_SIZE }, + { XCM_REG_XX_DESCR_TABLE, XCM_REG_XX_DESCR_TABLE_SIZE }, + + { 0xffffffff, 0 } + }; + + static const struct { + char *name; + u32 offset; + u32 hw_mask[BNX2X_CHIP_MAX_OFST]; + } prty_tbl[] = { + { "CCM_PRTY_STS", CCM_REG_CCM_PRTY_STS, + {0x3ffc0, 0, 0, 0} }, + { "CFC_PRTY_STS", CFC_REG_CFC_PRTY_STS, + {0x2, 0x2, 0, 0} }, + { "DMAE_PRTY_STS", DMAE_REG_DMAE_PRTY_STS, + {0, 0, 0, 0} }, + { "TCM_PRTY_STS", TCM_REG_TCM_PRTY_STS, + {0x3ffc0, 0, 0, 0} }, + { "UCM_PRTY_STS", UCM_REG_UCM_PRTY_STS, + {0x3ffc0, 0, 0, 0} }, + { "XCM_PRTY_STS", XCM_REG_XCM_PRTY_STS, + {0x3ffc1, 0, 0, 0} }, + + { NULL, 0xffffffff, {0, 0, 0, 0} } + }; + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return rc; + } + + if (CHIP_IS_E1(bp)) + index = BNX2X_CHIP_E1_OFST; + else if (CHIP_IS_E1H(bp)) + index = BNX2X_CHIP_E1H_OFST; + else if (CHIP_IS_E2(bp)) + index = BNX2X_CHIP_E2_OFST; + else /* e3 */ + index = BNX2X_CHIP_E3_OFST; + + /* pre-Check the parity status */ + for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) { + val = REG_RD(bp, prty_tbl[i].offset); + if (val & ~(prty_tbl[i].hw_mask[index])) { + DP(BNX2X_MSG_ETHTOOL, + "%s is 0x%x\n", prty_tbl[i].name, val); + goto test_mem_exit; + } + } + + /* Go through all the memories */ + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) + for (j = 0; j < mem_tbl[i].size; j++) + REG_RD(bp, mem_tbl[i].offset + j*4); + + /* Check the parity status */ + for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) { + val = REG_RD(bp, prty_tbl[i].offset); + if (val & ~(prty_tbl[i].hw_mask[index])) { + DP(BNX2X_MSG_ETHTOOL, + "%s is 0x%x\n", prty_tbl[i].name, val); + goto test_mem_exit; + } + } + + rc = 0; + +test_mem_exit: + return rc; +} + +static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up, u8 is_serdes) +{ + int cnt = 1400; + + if (link_up) { + while (bnx2x_link_test(bp, is_serdes) && cnt--) + msleep(20); + + if (cnt <= 0 && bnx2x_link_test(bp, is_serdes)) + DP(BNX2X_MSG_ETHTOOL, "Timeout waiting for link up\n"); + + cnt = 1400; + while (!bp->link_vars.link_up && cnt--) + msleep(20); + + if (cnt <= 0 && !bp->link_vars.link_up) + DP(BNX2X_MSG_ETHTOOL, + "Timeout waiting for link init\n"); + } +} + +static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode) +{ + unsigned int pkt_size, num_pkts, i; + struct sk_buff *skb; + unsigned char *packet; + struct bnx2x_fastpath *fp_rx = &bp->fp[0]; + struct bnx2x_fastpath *fp_tx = &bp->fp[0]; + struct bnx2x_fp_txdata *txdata = fp_tx->txdata_ptr[0]; + u16 tx_start_idx, tx_idx; + u16 rx_start_idx, rx_idx; + u16 pkt_prod, bd_prod; + struct sw_tx_bd *tx_buf; + struct eth_tx_start_bd *tx_start_bd; + dma_addr_t mapping; + union eth_rx_cqe *cqe; + u8 cqe_fp_flags, cqe_fp_type; + struct sw_rx_bd *rx_buf; + u16 len; + int rc = -ENODEV; + u8 *data; + struct netdev_queue *txq = netdev_get_tx_queue(bp->dev, + txdata->txq_index); + + /* check the loopback mode */ + switch (loopback_mode) { + case BNX2X_PHY_LOOPBACK: + if (bp->link_params.loopback_mode != LOOPBACK_XGXS) { + DP(BNX2X_MSG_ETHTOOL, "PHY loopback not supported\n"); + return -EINVAL; + } + break; + case BNX2X_MAC_LOOPBACK: + if (CHIP_IS_E3(bp)) { + int cfg_idx = bnx2x_get_link_cfg_idx(bp); + if (bp->port.supported[cfg_idx] & + (SUPPORTED_10000baseT_Full | + SUPPORTED_20000baseMLD2_Full | + SUPPORTED_20000baseKR2_Full)) + bp->link_params.loopback_mode = LOOPBACK_XMAC; + else + bp->link_params.loopback_mode = LOOPBACK_UMAC; + } else + bp->link_params.loopback_mode = LOOPBACK_BMAC; + + bnx2x_phy_init(&bp->link_params, &bp->link_vars); + break; + case BNX2X_EXT_LOOPBACK: + if (bp->link_params.loopback_mode != LOOPBACK_EXT) { + DP(BNX2X_MSG_ETHTOOL, + "Can't configure external loopback\n"); + return -EINVAL; + } + break; + default: + DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); + return -EINVAL; + } + + /* prepare the loopback packet */ + pkt_size = (((bp->dev->mtu < ETH_MAX_PACKET_SIZE) ? + bp->dev->mtu : ETH_MAX_PACKET_SIZE) + ETH_HLEN); + skb = netdev_alloc_skb(bp->dev, fp_rx->rx_buf_size); + if (!skb) { + DP(BNX2X_MSG_ETHTOOL, "Can't allocate skb\n"); + rc = -ENOMEM; + goto test_loopback_exit; + } + packet = skb_put(skb, pkt_size); + memcpy(packet, bp->dev->dev_addr, ETH_ALEN); + eth_zero_addr(packet + ETH_ALEN); + memset(packet + 2*ETH_ALEN, 0x77, (ETH_HLEN - 2*ETH_ALEN)); + for (i = ETH_HLEN; i < pkt_size; i++) + packet[i] = (unsigned char) (i & 0xff); + mapping = dma_map_single(&bp->pdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + rc = -ENOMEM; + dev_kfree_skb(skb); + DP(BNX2X_MSG_ETHTOOL, "Unable to map SKB\n"); + goto test_loopback_exit; + } + + /* send the loopback packet */ + num_pkts = 0; + tx_start_idx = le16_to_cpu(*txdata->tx_cons_sb); + rx_start_idx = le16_to_cpu(*fp_rx->rx_cons_sb); + + netdev_tx_sent_queue(txq, skb->len); + + pkt_prod = txdata->tx_pkt_prod++; + tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)]; + tx_buf->first_bd = txdata->tx_bd_prod; + tx_buf->skb = skb; + tx_buf->flags = 0; + + bd_prod = TX_BD(txdata->tx_bd_prod); + tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd; + tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + tx_start_bd->nbd = cpu_to_le16(2); /* start + pbd */ + tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb)); + tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD; + SET_FLAG(tx_start_bd->general_data, + ETH_TX_START_BD_HDR_NBDS, + 1); + SET_FLAG(tx_start_bd->general_data, + ETH_TX_START_BD_PARSE_NBDS, + 0); + + /* turn on parsing and get a BD */ + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + + if (CHIP_IS_E1x(bp)) { + u16 global_data = 0; + struct eth_tx_parse_bd_e1x *pbd_e1x = + &txdata->tx_desc_ring[bd_prod].parse_bd_e1x; + memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x)); + SET_FLAG(global_data, + ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE, UNICAST_ADDRESS); + pbd_e1x->global_data = cpu_to_le16(global_data); + } else { + u32 parsing_data = 0; + struct eth_tx_parse_bd_e2 *pbd_e2 = + &txdata->tx_desc_ring[bd_prod].parse_bd_e2; + memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2)); + SET_FLAG(parsing_data, + ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE, UNICAST_ADDRESS); + pbd_e2->parsing_data = cpu_to_le32(parsing_data); + } + wmb(); + + txdata->tx_db.data.prod += 2; + /* make sure descriptor update is observed by the HW */ + wmb(); + DOORBELL_RELAXED(bp, txdata->cid, txdata->tx_db.raw); + + mmiowb(); + barrier(); + + num_pkts++; + txdata->tx_bd_prod += 2; /* start + pbd */ + + udelay(100); + + tx_idx = le16_to_cpu(*txdata->tx_cons_sb); + if (tx_idx != tx_start_idx + num_pkts) + goto test_loopback_exit; + + /* Unlike HC IGU won't generate an interrupt for status block + * updates that have been performed while interrupts were + * disabled. + */ + if (bp->common.int_block == INT_BLOCK_IGU) { + /* Disable local BHes to prevent a dead-lock situation between + * sch_direct_xmit() and bnx2x_run_loopback() (calling + * bnx2x_tx_int()), as both are taking netif_tx_lock(). + */ + local_bh_disable(); + bnx2x_tx_int(bp, txdata); + local_bh_enable(); + } + + rx_idx = le16_to_cpu(*fp_rx->rx_cons_sb); + if (rx_idx != rx_start_idx + num_pkts) + goto test_loopback_exit; + + cqe = &fp_rx->rx_comp_ring[RCQ_BD(fp_rx->rx_comp_cons)]; + cqe_fp_flags = cqe->fast_path_cqe.type_error_flags; + cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE; + if (!CQE_TYPE_FAST(cqe_fp_type) || (cqe_fp_flags & ETH_RX_ERROR_FALGS)) + goto test_loopback_rx_exit; + + len = le16_to_cpu(cqe->fast_path_cqe.pkt_len_or_gro_seg_len); + if (len != pkt_size) + goto test_loopback_rx_exit; + + rx_buf = &fp_rx->rx_buf_ring[RX_BD(fp_rx->rx_bd_cons)]; + dma_sync_single_for_cpu(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + fp_rx->rx_buf_size, DMA_FROM_DEVICE); + data = rx_buf->data + NET_SKB_PAD + cqe->fast_path_cqe.placement_offset; + for (i = ETH_HLEN; i < pkt_size; i++) + if (*(data + i) != (unsigned char) (i & 0xff)) + goto test_loopback_rx_exit; + + rc = 0; + +test_loopback_rx_exit: + + fp_rx->rx_bd_cons = NEXT_RX_IDX(fp_rx->rx_bd_cons); + fp_rx->rx_bd_prod = NEXT_RX_IDX(fp_rx->rx_bd_prod); + fp_rx->rx_comp_cons = NEXT_RCQ_IDX(fp_rx->rx_comp_cons); + fp_rx->rx_comp_prod = NEXT_RCQ_IDX(fp_rx->rx_comp_prod); + + /* Update producers */ + bnx2x_update_rx_prod(bp, fp_rx, fp_rx->rx_bd_prod, fp_rx->rx_comp_prod, + fp_rx->rx_sge_prod); + +test_loopback_exit: + bp->link_params.loopback_mode = LOOPBACK_NONE; + + return rc; +} + +static int bnx2x_test_loopback(struct bnx2x *bp) +{ + int rc = 0, res; + + if (BP_NOMCP(bp)) + return rc; + + if (!netif_running(bp->dev)) + return BNX2X_LOOPBACK_FAILED; + + bnx2x_netif_stop(bp, 1); + bnx2x_acquire_phy_lock(bp); + + res = bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK); + if (res) { + DP(BNX2X_MSG_ETHTOOL, " PHY loopback failed (res %d)\n", res); + rc |= BNX2X_PHY_LOOPBACK_FAILED; + } + + res = bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK); + if (res) { + DP(BNX2X_MSG_ETHTOOL, " MAC loopback failed (res %d)\n", res); + rc |= BNX2X_MAC_LOOPBACK_FAILED; + } + + bnx2x_release_phy_lock(bp); + bnx2x_netif_start(bp); + + return rc; +} + +static int bnx2x_test_ext_loopback(struct bnx2x *bp) +{ + int rc; + u8 is_serdes = + (bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0; + + if (BP_NOMCP(bp)) + return -ENODEV; + + if (!netif_running(bp->dev)) + return BNX2X_EXT_LOOPBACK_FAILED; + + bnx2x_nic_unload(bp, UNLOAD_NORMAL, false); + rc = bnx2x_nic_load(bp, LOAD_LOOPBACK_EXT); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, + "Can't perform self-test, nic_load (for external lb) failed\n"); + return -ENODEV; + } + bnx2x_wait_for_link(bp, 1, is_serdes); + + bnx2x_netif_stop(bp, 1); + + rc = bnx2x_run_loopback(bp, BNX2X_EXT_LOOPBACK); + if (rc) + DP(BNX2X_MSG_ETHTOOL, "EXT loopback failed (res %d)\n", rc); + + bnx2x_netif_start(bp); + + return rc; +} + +struct code_entry { + u32 sram_start_addr; + u32 code_attribute; +#define CODE_IMAGE_TYPE_MASK 0xf0800003 +#define CODE_IMAGE_VNTAG_PROFILES_DATA 0xd0000003 +#define CODE_IMAGE_LENGTH_MASK 0x007ffffc +#define CODE_IMAGE_TYPE_EXTENDED_DIR 0xe0000000 + u32 nvm_start_addr; +}; + +#define CODE_ENTRY_MAX 16 +#define CODE_ENTRY_EXTENDED_DIR_IDX 15 +#define MAX_IMAGES_IN_EXTENDED_DIR 64 +#define NVRAM_DIR_OFFSET 0x14 + +#define EXTENDED_DIR_EXISTS(code) \ + ((code & CODE_IMAGE_TYPE_MASK) == CODE_IMAGE_TYPE_EXTENDED_DIR && \ + (code & CODE_IMAGE_LENGTH_MASK) != 0) + +#define CRC32_RESIDUAL 0xdebb20e3 +#define CRC_BUFF_SIZE 256 + +static int bnx2x_nvram_crc(struct bnx2x *bp, + int offset, + int size, + u8 *buff) +{ + u32 crc = ~0; + int rc = 0, done = 0; + + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "NVRAM CRC from 0x%08x to 0x%08x\n", offset, offset + size); + + while (done < size) { + int count = min_t(int, size - done, CRC_BUFF_SIZE); + + rc = bnx2x_nvram_read(bp, offset + done, buff, count); + + if (rc) + return rc; + + crc = crc32_le(crc, buff, count); + done += count; + } + + if (crc != CRC32_RESIDUAL) + rc = -EINVAL; + + return rc; +} + +static int bnx2x_test_nvram_dir(struct bnx2x *bp, + struct code_entry *entry, + u8 *buff) +{ + size_t size = entry->code_attribute & CODE_IMAGE_LENGTH_MASK; + u32 type = entry->code_attribute & CODE_IMAGE_TYPE_MASK; + int rc; + + /* Zero-length images and AFEX profiles do not have CRC */ + if (size == 0 || type == CODE_IMAGE_VNTAG_PROFILES_DATA) + return 0; + + rc = bnx2x_nvram_crc(bp, entry->nvm_start_addr, size, buff); + if (rc) + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "image %x has failed crc test (rc %d)\n", type, rc); + + return rc; +} + +static int bnx2x_test_dir_entry(struct bnx2x *bp, u32 addr, u8 *buff) +{ + int rc; + struct code_entry entry; + + rc = bnx2x_nvram_read32(bp, addr, (u32 *)&entry, sizeof(entry)); + if (rc) + return rc; + + return bnx2x_test_nvram_dir(bp, &entry, buff); +} + +static int bnx2x_test_nvram_ext_dirs(struct bnx2x *bp, u8 *buff) +{ + u32 rc, cnt, dir_offset = NVRAM_DIR_OFFSET; + struct code_entry entry; + int i; + + rc = bnx2x_nvram_read32(bp, + dir_offset + + sizeof(entry) * CODE_ENTRY_EXTENDED_DIR_IDX, + (u32 *)&entry, sizeof(entry)); + if (rc) + return rc; + + if (!EXTENDED_DIR_EXISTS(entry.code_attribute)) + return 0; + + rc = bnx2x_nvram_read32(bp, entry.nvm_start_addr, + &cnt, sizeof(u32)); + if (rc) + return rc; + + dir_offset = entry.nvm_start_addr + 8; + + for (i = 0; i < cnt && i < MAX_IMAGES_IN_EXTENDED_DIR; i++) { + rc = bnx2x_test_dir_entry(bp, dir_offset + + sizeof(struct code_entry) * i, + buff); + if (rc) + return rc; + } + + return 0; +} + +static int bnx2x_test_nvram_dirs(struct bnx2x *bp, u8 *buff) +{ + u32 rc, dir_offset = NVRAM_DIR_OFFSET; + int i; + + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "NVRAM DIRS CRC test-set\n"); + + for (i = 0; i < CODE_ENTRY_EXTENDED_DIR_IDX; i++) { + rc = bnx2x_test_dir_entry(bp, dir_offset + + sizeof(struct code_entry) * i, + buff); + if (rc) + return rc; + } + + return bnx2x_test_nvram_ext_dirs(bp, buff); +} + +struct crc_pair { + int offset; + int size; +}; + +static int bnx2x_test_nvram_tbl(struct bnx2x *bp, + const struct crc_pair *nvram_tbl, u8 *buf) +{ + int i; + + for (i = 0; nvram_tbl[i].size; i++) { + int rc = bnx2x_nvram_crc(bp, nvram_tbl[i].offset, + nvram_tbl[i].size, buf); + if (rc) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "nvram_tbl[%d] has failed crc test (rc %d)\n", + i, rc); + return rc; + } + } + + return 0; +} + +static int bnx2x_test_nvram(struct bnx2x *bp) +{ + static const struct crc_pair nvram_tbl[] = { + { 0, 0x14 }, /* bootstrap */ + { 0x14, 0xec }, /* dir */ + { 0x100, 0x350 }, /* manuf_info */ + { 0x450, 0xf0 }, /* feature_info */ + { 0x640, 0x64 }, /* upgrade_key_info */ + { 0x708, 0x70 }, /* manuf_key_info */ + { 0, 0 } + }; + static const struct crc_pair nvram_tbl2[] = { + { 0x7e8, 0x350 }, /* manuf_info2 */ + { 0xb38, 0xf0 }, /* feature_info */ + { 0, 0 } + }; + + u8 *buf; + int rc; + u32 magic; + + if (BP_NOMCP(bp)) + return 0; + + buf = kmalloc(CRC_BUFF_SIZE, GFP_KERNEL); + if (!buf) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "kmalloc failed\n"); + rc = -ENOMEM; + goto test_nvram_exit; + } + + rc = bnx2x_nvram_read32(bp, 0, &magic, sizeof(magic)); + if (rc) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "magic value read (rc %d)\n", rc); + goto test_nvram_exit; + } + + if (magic != 0x669955aa) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "wrong magic value (0x%08x)\n", magic); + rc = -ENODEV; + goto test_nvram_exit; + } + + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "Port 0 CRC test-set\n"); + rc = bnx2x_test_nvram_tbl(bp, nvram_tbl, buf); + if (rc) + goto test_nvram_exit; + + if (!CHIP_IS_E1x(bp) && !CHIP_IS_57811xx(bp)) { + u32 hide = SHMEM_RD(bp, dev_info.shared_hw_config.config2) & + SHARED_HW_CFG_HIDE_PORT1; + + if (!hide) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "Port 1 CRC test-set\n"); + rc = bnx2x_test_nvram_tbl(bp, nvram_tbl2, buf); + if (rc) + goto test_nvram_exit; + } + } + + rc = bnx2x_test_nvram_dirs(bp, buf); + +test_nvram_exit: + kfree(buf); + return rc; +} + +/* Send an EMPTY ramrod on the first queue */ +static int bnx2x_test_intr(struct bnx2x *bp) +{ + struct bnx2x_queue_state_params params = {NULL}; + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return -ENODEV; + } + + params.q_obj = &bp->sp_objs->q_obj; + params.cmd = BNX2X_Q_CMD_EMPTY; + + __set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags); + + return bnx2x_queue_state_change(bp, ¶ms); +} + +static void bnx2x_self_test(struct net_device *dev, + struct ethtool_test *etest, u64 *buf) +{ + struct bnx2x *bp = netdev_priv(dev); + u8 is_serdes, link_up; + int rc, cnt = 0; + + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, + "VFs are enabled, can not perform self test\n"); + return; + } + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + netdev_err(bp->dev, + "Handling parity error recovery. Try again later\n"); + etest->flags |= ETH_TEST_FL_FAILED; + return; + } + + DP(BNX2X_MSG_ETHTOOL, + "Self-test command parameters: offline = %d, external_lb = %d\n", + (etest->flags & ETH_TEST_FL_OFFLINE), + (etest->flags & ETH_TEST_FL_EXTERNAL_LB)>>2); + + memset(buf, 0, sizeof(u64) * BNX2X_NUM_TESTS(bp)); + + if (bnx2x_test_nvram(bp) != 0) { + if (!IS_MF(bp)) + buf[4] = 1; + else + buf[0] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (!netif_running(dev)) { + DP(BNX2X_MSG_ETHTOOL, "Interface is down\n"); + return; + } + + is_serdes = (bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0; + link_up = bp->link_vars.link_up; + /* offline tests are not supported in MF mode */ + if ((etest->flags & ETH_TEST_FL_OFFLINE) && !IS_MF(bp)) { + int port = BP_PORT(bp); + u32 val; + + /* save current value of input enable for TX port IF */ + val = REG_RD(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4); + /* disable input for TX port IF */ + REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0); + + bnx2x_nic_unload(bp, UNLOAD_NORMAL, false); + rc = bnx2x_nic_load(bp, LOAD_DIAG); + if (rc) { + etest->flags |= ETH_TEST_FL_FAILED; + DP(BNX2X_MSG_ETHTOOL, + "Can't perform self-test, nic_load (for offline) failed\n"); + return; + } + + /* wait until link state is restored */ + bnx2x_wait_for_link(bp, 1, is_serdes); + + if (bnx2x_test_registers(bp) != 0) { + buf[0] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2x_test_memory(bp) != 0) { + buf[1] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + buf[2] = bnx2x_test_loopback(bp); /* internal LB */ + if (buf[2] != 0) + etest->flags |= ETH_TEST_FL_FAILED; + + if (etest->flags & ETH_TEST_FL_EXTERNAL_LB) { + buf[3] = bnx2x_test_ext_loopback(bp); /* external LB */ + if (buf[3] != 0) + etest->flags |= ETH_TEST_FL_FAILED; + etest->flags |= ETH_TEST_FL_EXTERNAL_LB_DONE; + } + + bnx2x_nic_unload(bp, UNLOAD_NORMAL, false); + + /* restore input for TX port IF */ + REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, val); + rc = bnx2x_nic_load(bp, LOAD_NORMAL); + if (rc) { + etest->flags |= ETH_TEST_FL_FAILED; + DP(BNX2X_MSG_ETHTOOL, + "Can't perform self-test, nic_load (for online) failed\n"); + return; + } + /* wait until link state is restored */ + bnx2x_wait_for_link(bp, link_up, is_serdes); + } + + if (bnx2x_test_intr(bp) != 0) { + if (!IS_MF(bp)) + buf[5] = 1; + else + buf[1] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (link_up) { + cnt = 100; + while (bnx2x_link_test(bp, is_serdes) && --cnt) + msleep(20); + } + + if (!cnt) { + if (!IS_MF(bp)) + buf[6] = 1; + else + buf[2] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } +} + +#define IS_PORT_STAT(i) (bnx2x_stats_arr[i].is_port_stat) +#define HIDE_PORT_STAT(bp) IS_VF(bp) + +/* ethtool statistics are displayed for all regular ethernet queues and the + * fcoe L2 queue if not disabled + */ +static int bnx2x_num_stat_queues(struct bnx2x *bp) +{ + return BNX2X_NUM_ETH_QUEUES(bp); +} + +static int bnx2x_get_sset_count(struct net_device *dev, int stringset) +{ + struct bnx2x *bp = netdev_priv(dev); + int i, num_strings = 0; + + switch (stringset) { + case ETH_SS_STATS: + if (is_multi(bp)) { + num_strings = bnx2x_num_stat_queues(bp) * + BNX2X_NUM_Q_STATS; + } else + num_strings = 0; + if (HIDE_PORT_STAT(bp)) { + for (i = 0; i < BNX2X_NUM_STATS; i++) + if (!IS_PORT_STAT(i)) + num_strings++; + } else + num_strings += BNX2X_NUM_STATS; + + return num_strings; + + case ETH_SS_TEST: + return BNX2X_NUM_TESTS(bp); + + case ETH_SS_PRIV_FLAGS: + return BNX2X_PRI_FLAG_LEN; + + default: + return -EINVAL; + } +} + +static u32 bnx2x_get_private_flags(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 flags = 0; + + flags |= (!(bp->flags & NO_ISCSI_FLAG) ? 1 : 0) << BNX2X_PRI_FLAG_ISCSI; + flags |= (!(bp->flags & NO_FCOE_FLAG) ? 1 : 0) << BNX2X_PRI_FLAG_FCOE; + flags |= (!!IS_MF_STORAGE_ONLY(bp)) << BNX2X_PRI_FLAG_STORAGE; + + return flags; +} + +static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + struct bnx2x *bp = netdev_priv(dev); + int i, j, k, start; + char queue_name[MAX_QUEUE_NAME_LEN+1]; + + switch (stringset) { + case ETH_SS_STATS: + k = 0; + if (is_multi(bp)) { + for_each_eth_queue(bp, i) { + memset(queue_name, 0, sizeof(queue_name)); + snprintf(queue_name, sizeof(queue_name), + "%d", i); + for (j = 0; j < BNX2X_NUM_Q_STATS; j++) + snprintf(buf + (k + j)*ETH_GSTRING_LEN, + ETH_GSTRING_LEN, + bnx2x_q_stats_arr[j].string, + queue_name); + k += BNX2X_NUM_Q_STATS; + } + } + + for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) { + if (HIDE_PORT_STAT(bp) && IS_PORT_STAT(i)) + continue; + strcpy(buf + (k + j)*ETH_GSTRING_LEN, + bnx2x_stats_arr[i].string); + j++; + } + + break; + + case ETH_SS_TEST: + /* First 4 tests cannot be done in MF mode */ + if (!IS_MF(bp)) + start = 0; + else + start = 4; + memcpy(buf, bnx2x_tests_str_arr + start, + ETH_GSTRING_LEN * BNX2X_NUM_TESTS(bp)); + break; + + case ETH_SS_PRIV_FLAGS: + memcpy(buf, bnx2x_private_arr, + ETH_GSTRING_LEN * BNX2X_PRI_FLAG_LEN); + break; + } +} + +static void bnx2x_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *buf) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 *hw_stats, *offset; + int i, j, k = 0; + + if (is_multi(bp)) { + for_each_eth_queue(bp, i) { + hw_stats = (u32 *)&bp->fp_stats[i].eth_q_stats; + for (j = 0; j < BNX2X_NUM_Q_STATS; j++) { + if (bnx2x_q_stats_arr[j].size == 0) { + /* skip this counter */ + buf[k + j] = 0; + continue; + } + offset = (hw_stats + + bnx2x_q_stats_arr[j].offset); + if (bnx2x_q_stats_arr[j].size == 4) { + /* 4-byte counter */ + buf[k + j] = (u64) *offset; + continue; + } + /* 8-byte counter */ + buf[k + j] = HILO_U64(*offset, *(offset + 1)); + } + k += BNX2X_NUM_Q_STATS; + } + } + + hw_stats = (u32 *)&bp->eth_stats; + for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) { + if (HIDE_PORT_STAT(bp) && IS_PORT_STAT(i)) + continue; + if (bnx2x_stats_arr[i].size == 0) { + /* skip this counter */ + buf[k + j] = 0; + j++; + continue; + } + offset = (hw_stats + bnx2x_stats_arr[i].offset); + if (bnx2x_stats_arr[i].size == 4) { + /* 4-byte counter */ + buf[k + j] = (u64) *offset; + j++; + continue; + } + /* 8-byte counter */ + buf[k + j] = HILO_U64(*offset, *(offset + 1)); + j++; + } +} + +static int bnx2x_set_phys_id(struct net_device *dev, + enum ethtool_phys_id_state state) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (!bnx2x_is_nvm_accessible(bp)) { + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + "cannot access eeprom when the interface is down\n"); + return -EAGAIN; + } + + switch (state) { + case ETHTOOL_ID_ACTIVE: + return 1; /* cycle on/off once per second */ + + case ETHTOOL_ID_ON: + bnx2x_acquire_phy_lock(bp); + bnx2x_set_led(&bp->link_params, &bp->link_vars, + LED_MODE_ON, SPEED_1000); + bnx2x_release_phy_lock(bp); + break; + + case ETHTOOL_ID_OFF: + bnx2x_acquire_phy_lock(bp); + bnx2x_set_led(&bp->link_params, &bp->link_vars, + LED_MODE_FRONT_PANEL_OFF, 0); + bnx2x_release_phy_lock(bp); + break; + + case ETHTOOL_ID_INACTIVE: + bnx2x_acquire_phy_lock(bp); + bnx2x_set_led(&bp->link_params, &bp->link_vars, + LED_MODE_OPER, + bp->link_vars.line_speed); + bnx2x_release_phy_lock(bp); + } + + return 0; +} + +static int bnx2x_get_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) +{ + switch (info->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + break; + case UDP_V4_FLOW: + if (bp->rss_conf_obj.udp_rss_v4) + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + else + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case UDP_V6_FLOW: + if (bp->rss_conf_obj.udp_rss_v6) + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + else + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case IPV4_FLOW: + case IPV6_FLOW: + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + default: + info->data = 0; + break; + } + + return 0; +} + +static int bnx2x_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, + u32 *rules __always_unused) +{ + struct bnx2x *bp = netdev_priv(dev); + + switch (info->cmd) { + case ETHTOOL_GRXRINGS: + info->data = BNX2X_NUM_ETH_QUEUES(bp); + return 0; + case ETHTOOL_GRXFH: + return bnx2x_get_rss_flags(bp, info); + default: + DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); + return -EOPNOTSUPP; + } +} + +static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) +{ + int udp_rss_requested; + + DP(BNX2X_MSG_ETHTOOL, + "Set rss flags command parameters: flow type = %d, data = %llu\n", + info->flow_type, info->data); + + switch (info->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + /* For TCP only 4-tupple hash is supported */ + if (info->data ^ (RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + DP(BNX2X_MSG_ETHTOOL, + "Command parameters not supported\n"); + return -EINVAL; + } + return 0; + + case UDP_V4_FLOW: + case UDP_V6_FLOW: + /* For UDP either 2-tupple hash or 4-tupple hash is supported */ + if (info->data == (RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3)) + udp_rss_requested = 1; + else if (info->data == (RXH_IP_SRC | RXH_IP_DST)) + udp_rss_requested = 0; + else + return -EINVAL; + + if (CHIP_IS_E1x(bp) && udp_rss_requested) { + DP(BNX2X_MSG_ETHTOOL, + "57710, 57711 boards don't support RSS according to UDP 4-tuple\n"); + return -EINVAL; + } + + if ((info->flow_type == UDP_V4_FLOW) && + (bp->rss_conf_obj.udp_rss_v4 != udp_rss_requested)) { + bp->rss_conf_obj.udp_rss_v4 = udp_rss_requested; + DP(BNX2X_MSG_ETHTOOL, + "rss re-configured, UDP 4-tupple %s\n", + udp_rss_requested ? "enabled" : "disabled"); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_rss(bp, &bp->rss_conf_obj, false, + true); + } else if ((info->flow_type == UDP_V6_FLOW) && + (bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) { + bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested; + DP(BNX2X_MSG_ETHTOOL, + "rss re-configured, UDP 4-tupple %s\n", + udp_rss_requested ? "enabled" : "disabled"); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_rss(bp, &bp->rss_conf_obj, false, + true); + } + return 0; + + case IPV4_FLOW: + case IPV6_FLOW: + /* For IP only 2-tupple hash is supported */ + if (info->data ^ (RXH_IP_SRC | RXH_IP_DST)) { + DP(BNX2X_MSG_ETHTOOL, + "Command parameters not supported\n"); + return -EINVAL; + } + return 0; + + case SCTP_V4_FLOW: + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case SCTP_V6_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case IP_USER_FLOW: + case ETHER_FLOW: + /* RSS is not supported for these protocols */ + if (info->data) { + DP(BNX2X_MSG_ETHTOOL, + "Command parameters not supported\n"); + return -EINVAL; + } + return 0; + + default: + return -EINVAL; + } +} + +static int bnx2x_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info) +{ + struct bnx2x *bp = netdev_priv(dev); + + switch (info->cmd) { + case ETHTOOL_SRXFH: + return bnx2x_set_rss_flags(bp, info); + default: + DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n"); + return -EOPNOTSUPP; + } +} + +static u32 bnx2x_get_rxfh_indir_size(struct net_device *dev) +{ + return T_ETH_INDIRECTION_TABLE_SIZE; +} + +static int bnx2x_get_rxfh(struct net_device *dev, u32 *indir, u8 *key, + u8 *hfunc) +{ + struct bnx2x *bp = netdev_priv(dev); + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0}; + size_t i; + + if (hfunc) + *hfunc = ETH_RSS_HASH_TOP; + if (!indir) + return 0; + + /* Get the current configuration of the RSS indirection table */ + bnx2x_get_rss_ind_table(&bp->rss_conf_obj, ind_table); + + /* + * We can't use a memcpy() as an internal storage of an + * indirection table is a u8 array while indir->ring_index + * points to an array of u32. + * + * Indirection table contains the FW Client IDs, so we need to + * align the returned table to the Client ID of the leading RSS + * queue. + */ + for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++) + indir[i] = ind_table[i] - bp->fp->cl_id; + + return 0; +} + +static int bnx2x_set_rxfh(struct net_device *dev, const u32 *indir, + const u8 *key, const u8 hfunc) +{ + struct bnx2x *bp = netdev_priv(dev); + size_t i; + + /* We require at least one supported parameter to be changed and no + * change in any of the unsupported parameters + */ + if (key || + (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)) + return -EOPNOTSUPP; + + if (!indir) + return 0; + + for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++) { + /* + * The same as in bnx2x_get_rxfh: we can't use a memcpy() + * as an internal storage of an indirection table is a u8 array + * while indir->ring_index points to an array of u32. + * + * Indirection table contains the FW Client IDs, so we need to + * align the received table to the Client ID of the leading RSS + * queue + */ + bp->rss_conf_obj.ind_table[i] = indir[i] + bp->fp->cl_id; + } + + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_config_rss_eth(bp, false); + + return 0; +} + +/** + * bnx2x_get_channels - gets the number of RSS queues. + * + * @dev: net device + * @channels: returns the number of max / current queues + */ +static void bnx2x_get_channels(struct net_device *dev, + struct ethtool_channels *channels) +{ + struct bnx2x *bp = netdev_priv(dev); + + channels->max_combined = BNX2X_MAX_RSS_COUNT(bp); + channels->combined_count = BNX2X_NUM_ETH_QUEUES(bp); +} + +/** + * bnx2x_change_num_queues - change the number of RSS queues. + * + * @bp: bnx2x private structure + * + * Re-configure interrupt mode to get the new number of MSI-X + * vectors and re-add NAPI objects. + */ +static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss) +{ + bnx2x_disable_msi(bp); + bp->num_ethernet_queues = num_rss; + bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; + BNX2X_DEV_INFO("set number of queues to %d\n", bp->num_queues); + bnx2x_set_int_mode(bp); +} + +/** + * bnx2x_set_channels - sets the number of RSS queues. + * + * @dev: net device + * @channels: includes the number of queues requested + */ +static int bnx2x_set_channels(struct net_device *dev, + struct ethtool_channels *channels) +{ + struct bnx2x *bp = netdev_priv(dev); + + DP(BNX2X_MSG_ETHTOOL, + "set-channels command parameters: rx = %d, tx = %d, other = %d, combined = %d\n", + channels->rx_count, channels->tx_count, channels->other_count, + channels->combined_count); + + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, "VFs are enabled, can not set channels\n"); + return -EPERM; + } + + /* We don't support separate rx / tx channels. + * We don't allow setting 'other' channels. + */ + if (channels->rx_count || channels->tx_count || channels->other_count + || (channels->combined_count == 0) || + (channels->combined_count > BNX2X_MAX_RSS_COUNT(bp))) { + DP(BNX2X_MSG_ETHTOOL, "command parameters not supported\n"); + return -EINVAL; + } + + /* Check if there was a change in the active parameters */ + if (channels->combined_count == BNX2X_NUM_ETH_QUEUES(bp)) { + DP(BNX2X_MSG_ETHTOOL, "No change in active parameters\n"); + return 0; + } + + /* Set the requested number of queues in bp context. + * Note that the actual number of queues created during load may be + * less than requested if memory is low. + */ + if (unlikely(!netif_running(dev))) { + bnx2x_change_num_queues(bp, channels->combined_count); + return 0; + } + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); + bnx2x_change_num_queues(bp, channels->combined_count); + return bnx2x_nic_load(bp, LOAD_NORMAL); +} + +static int bnx2x_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->flags & PTP_SUPPORTED) { + info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (bp->ptp_clock) + info->phc_index = ptp_clock_index(bp->ptp_clock); + else + info->phc_index = -1; + + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); + + info->tx_types = (1 << HWTSTAMP_TX_OFF)|(1 << HWTSTAMP_TX_ON); + + return 0; + } + + return ethtool_op_get_ts_info(dev, info); +} + +static const struct ethtool_ops bnx2x_ethtool_ops = { + .get_drvinfo = bnx2x_get_drvinfo, + .get_regs_len = bnx2x_get_regs_len, + .get_regs = bnx2x_get_regs, + .get_dump_flag = bnx2x_get_dump_flag, + .get_dump_data = bnx2x_get_dump_data, + .set_dump = bnx2x_set_dump, + .get_wol = bnx2x_get_wol, + .set_wol = bnx2x_set_wol, + .get_msglevel = bnx2x_get_msglevel, + .set_msglevel = bnx2x_set_msglevel, + .nway_reset = bnx2x_nway_reset, + .get_link = bnx2x_get_link, + .get_eeprom_len = bnx2x_get_eeprom_len, + .get_eeprom = bnx2x_get_eeprom, + .set_eeprom = bnx2x_set_eeprom, + .get_coalesce = bnx2x_get_coalesce, + .set_coalesce = bnx2x_set_coalesce, + .get_ringparam = bnx2x_get_ringparam, + .set_ringparam = bnx2x_set_ringparam, + .get_pauseparam = bnx2x_get_pauseparam, + .set_pauseparam = bnx2x_set_pauseparam, + .self_test = bnx2x_self_test, + .get_sset_count = bnx2x_get_sset_count, + .get_priv_flags = bnx2x_get_private_flags, + .get_strings = bnx2x_get_strings, + .set_phys_id = bnx2x_set_phys_id, + .get_ethtool_stats = bnx2x_get_ethtool_stats, + .get_rxnfc = bnx2x_get_rxnfc, + .set_rxnfc = bnx2x_set_rxnfc, + .get_rxfh_indir_size = bnx2x_get_rxfh_indir_size, + .get_rxfh = bnx2x_get_rxfh, + .set_rxfh = bnx2x_set_rxfh, + .get_channels = bnx2x_get_channels, + .set_channels = bnx2x_set_channels, + .get_module_info = bnx2x_get_module_info, + .get_module_eeprom = bnx2x_get_module_eeprom, + .get_eee = bnx2x_get_eee, + .set_eee = bnx2x_set_eee, + .get_ts_info = bnx2x_get_ts_info, + .get_link_ksettings = bnx2x_get_link_ksettings, + .set_link_ksettings = bnx2x_set_link_ksettings, +}; + +static const struct ethtool_ops bnx2x_vf_ethtool_ops = { + .get_drvinfo = bnx2x_get_drvinfo, + .get_msglevel = bnx2x_get_msglevel, + .set_msglevel = bnx2x_set_msglevel, + .get_link = bnx2x_get_link, + .get_coalesce = bnx2x_get_coalesce, + .get_ringparam = bnx2x_get_ringparam, + .set_ringparam = bnx2x_set_ringparam, + .get_sset_count = bnx2x_get_sset_count, + .get_strings = bnx2x_get_strings, + .get_ethtool_stats = bnx2x_get_ethtool_stats, + .get_rxnfc = bnx2x_get_rxnfc, + .set_rxnfc = bnx2x_set_rxnfc, + .get_rxfh_indir_size = bnx2x_get_rxfh_indir_size, + .get_rxfh = bnx2x_get_rxfh, + .set_rxfh = bnx2x_set_rxfh, + .get_channels = bnx2x_get_channels, + .set_channels = bnx2x_set_channels, + .get_link_ksettings = bnx2x_get_vf_link_ksettings, +}; + +void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev) +{ + netdev->ethtool_ops = (IS_PF(bp)) ? + &bnx2x_ethtool_ops : &bnx2x_vf_ethtool_ops; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h new file mode 100644 index 000000000..226ab29f4 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -0,0 +1,398 @@ +/* bnx2x_fw_defs.h: Qlogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef BNX2X_FW_DEFS_H +#define BNX2X_FW_DEFS_H + +#define CSTORM_ASSERT_LIST_INDEX_OFFSET (IRO[152].base) +#define CSTORM_ASSERT_LIST_OFFSET(assertListEntry) \ + (IRO[151].base + ((assertListEntry) * IRO[151].m1)) +#define CSTORM_EVENT_RING_DATA_OFFSET(pfId) \ + (IRO[157].base + (((pfId)>>1) * IRO[157].m1) + (((pfId)&1) * \ + IRO[157].m2)) +#define CSTORM_EVENT_RING_PROD_OFFSET(pfId) \ + (IRO[158].base + (((pfId)>>1) * IRO[158].m1) + (((pfId)&1) * \ + IRO[158].m2)) +#define CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(funcId) \ + (IRO[163].base + ((funcId) * IRO[163].m1)) +#define CSTORM_FUNC_EN_OFFSET(funcId) \ + (IRO[153].base + ((funcId) * IRO[153].m1)) +#define CSTORM_HC_SYNC_LINE_INDEX_E1X_OFFSET(hcIndex, sbId) \ + (IRO[143].base + ((hcIndex) * IRO[143].m1) + ((sbId) * IRO[143].m2)) +#define CSTORM_HC_SYNC_LINE_INDEX_E2_OFFSET(hcIndex, sbId) \ + (IRO[142].base + (((hcIndex)>>2) * IRO[142].m1) + (((hcIndex)&3) \ + * IRO[142].m2) + ((sbId) * IRO[142].m3)) +#define CSTORM_IGU_MODE_OFFSET (IRO[161].base) +#define CSTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \ + (IRO[323].base + ((pfId) * IRO[323].m1)) +#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ + (IRO[324].base + ((pfId) * IRO[324].m1)) +#define CSTORM_ISCSI_EQ_CONS_OFFSET(pfId, iscsiEqId) \ + (IRO[316].base + ((pfId) * IRO[316].m1) + ((iscsiEqId) * IRO[316].m2)) +#define CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(pfId, iscsiEqId) \ + (IRO[318].base + ((pfId) * IRO[318].m1) + ((iscsiEqId) * IRO[318].m2)) +#define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(pfId, iscsiEqId) \ + (IRO[317].base + ((pfId) * IRO[317].m1) + ((iscsiEqId) * IRO[317].m2)) +#define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_VALID_OFFSET(pfId, iscsiEqId) \ + (IRO[319].base + ((pfId) * IRO[319].m1) + ((iscsiEqId) * IRO[319].m2)) +#define CSTORM_ISCSI_EQ_PROD_OFFSET(pfId, iscsiEqId) \ + (IRO[315].base + ((pfId) * IRO[315].m1) + ((iscsiEqId) * IRO[315].m2)) +#define CSTORM_ISCSI_EQ_SB_INDEX_OFFSET(pfId, iscsiEqId) \ + (IRO[321].base + ((pfId) * IRO[321].m1) + ((iscsiEqId) * IRO[321].m2)) +#define CSTORM_ISCSI_EQ_SB_NUM_OFFSET(pfId, iscsiEqId) \ + (IRO[320].base + ((pfId) * IRO[320].m1) + ((iscsiEqId) * IRO[320].m2)) +#define CSTORM_ISCSI_HQ_SIZE_OFFSET(pfId) \ + (IRO[322].base + ((pfId) * IRO[322].m1)) +#define CSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ + (IRO[314].base + ((pfId) * IRO[314].m1)) +#define CSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ + (IRO[313].base + ((pfId) * IRO[313].m1)) +#define CSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ + (IRO[312].base + ((pfId) * IRO[312].m1)) +#define CSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ + (IRO[155].base + ((funcId) * IRO[155].m1)) +#define CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(pfId) \ + (IRO[146].base + ((pfId) * IRO[146].m1)) +#define CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(pfId) \ + (IRO[147].base + ((pfId) * IRO[147].m1)) +#define CSTORM_SP_STATUS_BLOCK_OFFSET(pfId) \ + (IRO[145].base + ((pfId) * IRO[145].m1)) +#define CSTORM_SP_STATUS_BLOCK_SIZE (IRO[145].size) +#define CSTORM_SP_SYNC_BLOCK_OFFSET(pfId) \ + (IRO[148].base + ((pfId) * IRO[148].m1)) +#define CSTORM_SP_SYNC_BLOCK_SIZE (IRO[148].size) +#define CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(sbId, hcIndex) \ + (IRO[140].base + ((sbId) * IRO[140].m1) + ((hcIndex) * IRO[140].m2)) +#define CSTORM_STATUS_BLOCK_DATA_OFFSET(sbId) \ + (IRO[137].base + ((sbId) * IRO[137].m1)) +#define CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(sbId) \ + (IRO[138].base + ((sbId) * IRO[138].m1)) +#define CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(sbId, hcIndex) \ + (IRO[139].base + ((sbId) * IRO[139].m1) + ((hcIndex) * IRO[139].m2)) +#define CSTORM_STATUS_BLOCK_OFFSET(sbId) \ + (IRO[136].base + ((sbId) * IRO[136].m1)) +#define CSTORM_STATUS_BLOCK_SIZE (IRO[136].size) +#define CSTORM_SYNC_BLOCK_OFFSET(sbId) \ + (IRO[141].base + ((sbId) * IRO[141].m1)) +#define CSTORM_SYNC_BLOCK_SIZE (IRO[141].size) +#define CSTORM_VF_PF_CHANNEL_STATE_OFFSET(vfId) \ + (IRO[159].base + ((vfId) * IRO[159].m1)) +#define CSTORM_VF_PF_CHANNEL_VALID_OFFSET(vfId) \ + (IRO[160].base + ((vfId) * IRO[160].m1)) +#define CSTORM_VF_TO_PF_OFFSET(funcId) \ + (IRO[154].base + ((funcId) * IRO[154].m1)) +#define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(pfId) \ + (IRO[207].base + ((pfId) * IRO[207].m1)) +#define TSTORM_ASSERT_LIST_INDEX_OFFSET (IRO[102].base) +#define TSTORM_ASSERT_LIST_OFFSET(assertListEntry) \ + (IRO[101].base + ((assertListEntry) * IRO[101].m1)) +#define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(pfId) \ + (IRO[205].base + ((pfId) * IRO[205].m1)) +#define TSTORM_FUNC_EN_OFFSET(funcId) \ + (IRO[107].base + ((funcId) * IRO[107].m1)) +#define TSTORM_ISCSI_ERROR_BITMAP_OFFSET(pfId) \ + (IRO[278].base + ((pfId) * IRO[278].m1)) +#define TSTORM_ISCSI_L2_ISCSI_OOO_CID_TABLE_OFFSET(pfId) \ + (IRO[279].base + ((pfId) * IRO[279].m1)) +#define TSTORM_ISCSI_L2_ISCSI_OOO_CLIENT_ID_TABLE_OFFSET(pfId) \ + (IRO[280].base + ((pfId) * IRO[280].m1)) +#define TSTORM_ISCSI_L2_ISCSI_OOO_PROD_OFFSET(pfId) \ + (IRO[281].base + ((pfId) * IRO[281].m1)) +#define TSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ + (IRO[277].base + ((pfId) * IRO[277].m1)) +#define TSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ + (IRO[276].base + ((pfId) * IRO[276].m1)) +#define TSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ + (IRO[275].base + ((pfId) * IRO[275].m1)) +#define TSTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ + (IRO[274].base + ((pfId) * IRO[274].m1)) +#define TSTORM_ISCSI_TCP_LOCAL_ADV_WND_OFFSET(pfId) \ + (IRO[284].base + ((pfId) * IRO[284].m1)) +#define TSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(pfId) \ + (IRO[270].base + ((pfId) * IRO[270].m1)) +#define TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ + (IRO[271].base + ((pfId) * IRO[271].m1)) +#define TSTORM_ISCSI_TCP_VARS_MID_LOCAL_MAC_ADDR_OFFSET(pfId) \ + (IRO[272].base + ((pfId) * IRO[272].m1)) +#define TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ + (IRO[273].base + ((pfId) * IRO[273].m1)) +#define TSTORM_MAC_FILTER_CONFIG_OFFSET(pfId) \ + (IRO[206].base + ((pfId) * IRO[206].m1)) +#define TSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ + (IRO[109].base + ((funcId) * IRO[109].m1)) +#define TSTORM_TCP_MAX_CWND_OFFSET(pfId) \ + (IRO[223].base + ((pfId) * IRO[223].m1)) +#define TSTORM_VF_TO_PF_OFFSET(funcId) \ + (IRO[108].base + ((funcId) * IRO[108].m1)) +#define USTORM_AGG_DATA_OFFSET (IRO[212].base) +#define USTORM_AGG_DATA_SIZE (IRO[212].size) +#define USTORM_ASSERT_LIST_INDEX_OFFSET (IRO[181].base) +#define USTORM_ASSERT_LIST_OFFSET(assertListEntry) \ + (IRO[180].base + ((assertListEntry) * IRO[180].m1)) +#define USTORM_ETH_PAUSE_ENABLED_OFFSET(portId) \ + (IRO[187].base + ((portId) * IRO[187].m1)) +#define USTORM_FCOE_EQ_PROD_OFFSET(pfId) \ + (IRO[325].base + ((pfId) * IRO[325].m1)) +#define USTORM_FUNC_EN_OFFSET(funcId) \ + (IRO[182].base + ((funcId) * IRO[182].m1)) +#define USTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \ + (IRO[289].base + ((pfId) * IRO[289].m1)) +#define USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ + (IRO[290].base + ((pfId) * IRO[290].m1)) +#define USTORM_ISCSI_ERROR_BITMAP_OFFSET(pfId) \ + (IRO[294].base + ((pfId) * IRO[294].m1)) +#define USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(pfId) \ + (IRO[291].base + ((pfId) * IRO[291].m1)) +#define USTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ + (IRO[287].base + ((pfId) * IRO[287].m1)) +#define USTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ + (IRO[286].base + ((pfId) * IRO[286].m1)) +#define USTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ + (IRO[285].base + ((pfId) * IRO[285].m1)) +#define USTORM_ISCSI_R2TQ_SIZE_OFFSET(pfId) \ + (IRO[288].base + ((pfId) * IRO[288].m1)) +#define USTORM_ISCSI_RQ_BUFFER_SIZE_OFFSET(pfId) \ + (IRO[292].base + ((pfId) * IRO[292].m1)) +#define USTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ + (IRO[293].base + ((pfId) * IRO[293].m1)) +#define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(pfId) \ + (IRO[186].base + ((pfId) * IRO[186].m1)) +#define USTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ + (IRO[184].base + ((funcId) * IRO[184].m1)) +#define USTORM_RX_PRODS_E1X_OFFSET(portId, clientId) \ + (IRO[215].base + ((portId) * IRO[215].m1) + ((clientId) * \ + IRO[215].m2)) +#define USTORM_RX_PRODS_E2_OFFSET(qzoneId) \ + (IRO[216].base + ((qzoneId) * IRO[216].m1)) +#define USTORM_TPA_BTR_OFFSET (IRO[213].base) +#define USTORM_TPA_BTR_SIZE (IRO[213].size) +#define USTORM_VF_TO_PF_OFFSET(funcId) \ + (IRO[183].base + ((funcId) * IRO[183].m1)) +#define XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE (IRO[67].base) +#define XSTORM_AGG_INT_FINAL_CLEANUP_INDEX (IRO[66].base) +#define XSTORM_ASSERT_LIST_INDEX_OFFSET (IRO[51].base) +#define XSTORM_ASSERT_LIST_OFFSET(assertListEntry) \ + (IRO[50].base + ((assertListEntry) * IRO[50].m1)) +#define XSTORM_CMNG_PER_PORT_VARS_OFFSET(portId) \ + (IRO[43].base + ((portId) * IRO[43].m1)) +#define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(pfId) \ + (IRO[45].base + ((pfId) * IRO[45].m1)) +#define XSTORM_FUNC_EN_OFFSET(funcId) \ + (IRO[47].base + ((funcId) * IRO[47].m1)) +#define XSTORM_ISCSI_HQ_SIZE_OFFSET(pfId) \ + (IRO[302].base + ((pfId) * IRO[302].m1)) +#define XSTORM_ISCSI_LOCAL_MAC_ADDR0_OFFSET(pfId) \ + (IRO[305].base + ((pfId) * IRO[305].m1)) +#define XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(pfId) \ + (IRO[306].base + ((pfId) * IRO[306].m1)) +#define XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(pfId) \ + (IRO[307].base + ((pfId) * IRO[307].m1)) +#define XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(pfId) \ + (IRO[308].base + ((pfId) * IRO[308].m1)) +#define XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(pfId) \ + (IRO[309].base + ((pfId) * IRO[309].m1)) +#define XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(pfId) \ + (IRO[310].base + ((pfId) * IRO[310].m1)) +#define XSTORM_ISCSI_LOCAL_VLAN_OFFSET(pfId) \ + (IRO[311].base + ((pfId) * IRO[311].m1)) +#define XSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ + (IRO[301].base + ((pfId) * IRO[301].m1)) +#define XSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ + (IRO[300].base + ((pfId) * IRO[300].m1)) +#define XSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ + (IRO[299].base + ((pfId) * IRO[299].m1)) +#define XSTORM_ISCSI_R2TQ_SIZE_OFFSET(pfId) \ + (IRO[304].base + ((pfId) * IRO[304].m1)) +#define XSTORM_ISCSI_SQ_SIZE_OFFSET(pfId) \ + (IRO[303].base + ((pfId) * IRO[303].m1)) +#define XSTORM_ISCSI_TCP_VARS_ADV_WND_SCL_OFFSET(pfId) \ + (IRO[298].base + ((pfId) * IRO[298].m1)) +#define XSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(pfId) \ + (IRO[297].base + ((pfId) * IRO[297].m1)) +#define XSTORM_ISCSI_TCP_VARS_TOS_OFFSET(pfId) \ + (IRO[296].base + ((pfId) * IRO[296].m1)) +#define XSTORM_ISCSI_TCP_VARS_TTL_OFFSET(pfId) \ + (IRO[295].base + ((pfId) * IRO[295].m1)) +#define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(pfId) \ + (IRO[44].base + ((pfId) * IRO[44].m1)) +#define XSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ + (IRO[49].base + ((funcId) * IRO[49].m1)) +#define XSTORM_SPQ_DATA_OFFSET(funcId) \ + (IRO[32].base + ((funcId) * IRO[32].m1)) +#define XSTORM_SPQ_DATA_SIZE (IRO[32].size) +#define XSTORM_SPQ_PAGE_BASE_OFFSET(funcId) \ + (IRO[30].base + ((funcId) * IRO[30].m1)) +#define XSTORM_SPQ_PROD_OFFSET(funcId) \ + (IRO[31].base + ((funcId) * IRO[31].m1)) +#define XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_ENABLED_OFFSET(portId) \ + (IRO[217].base + ((portId) * IRO[217].m1)) +#define XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_MAX_COUNT_OFFSET(portId) \ + (IRO[218].base + ((portId) * IRO[218].m1)) +#define XSTORM_TCP_TX_SWS_TIMER_VAL_OFFSET(pfId) \ + (IRO[220].base + (((pfId)>>1) * IRO[220].m1) + (((pfId)&1) * \ + IRO[220].m2)) +#define XSTORM_VF_TO_PF_OFFSET(funcId) \ + (IRO[48].base + ((funcId) * IRO[48].m1)) +#define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0 + +/* eth hsi version */ +#define ETH_FP_HSI_VERSION (ETH_FP_HSI_VER_2) + +/* Ethernet Ring parameters */ +#define X_ETH_LOCAL_RING_SIZE 13 +#define FIRST_BD_IN_PKT 0 +#define PARSE_BD_INDEX 1 +#define NUM_OF_ETH_BDS_IN_PAGE ((PAGE_SIZE)/(STRUCT_SIZE(eth_tx_bd)/8)) +#define U_ETH_NUM_OF_SGES_TO_FETCH 8 +#define U_ETH_MAX_SGES_FOR_PACKET 3 + +/* Rx ring params */ +#define U_ETH_LOCAL_BD_RING_SIZE 8 +#define U_ETH_LOCAL_SGE_RING_SIZE 10 +#define U_ETH_SGL_SIZE 8 + /* The fw will padd the buffer with this value, so the IP header \ + will be align to 4 Byte */ +#define IP_HEADER_ALIGNMENT_PADDING 2 + +#define U_ETH_SGES_PER_PAGE_INVERSE_MASK \ + (0xFFFF - ((PAGE_SIZE/((STRUCT_SIZE(eth_rx_sge))/8))-1)) + +#define TU_ETH_CQES_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_cqe)/8)) +#define U_ETH_BDS_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_bd)/8)) +#define U_ETH_SGES_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_sge)/8)) + +#define U_ETH_BDS_PER_PAGE_MASK (U_ETH_BDS_PER_PAGE-1) +#define U_ETH_CQE_PER_PAGE_MASK (TU_ETH_CQES_PER_PAGE-1) +#define U_ETH_SGES_PER_PAGE_MASK (U_ETH_SGES_PER_PAGE-1) + +#define U_ETH_UNDEFINED_Q 0xFF + +#define T_ETH_INDIRECTION_TABLE_SIZE 128 +#define T_ETH_RSS_KEY 10 +#define ETH_NUM_OF_RSS_ENGINES_E2 72 + +#define FILTER_RULES_COUNT 16 +#define MULTICAST_RULES_COUNT 16 +#define CLASSIFY_RULES_COUNT 16 + +/*The CRC32 seed, that is used for the hash(reduction) multicast address */ +#define ETH_CRC32_HASH_SEED 0x00000000 + +#define ETH_CRC32_HASH_BIT_SIZE (8) +#define ETH_CRC32_HASH_MASK EVAL((1<<ETH_CRC32_HASH_BIT_SIZE)-1) + +/* Maximal L2 clients supported */ +#define ETH_MAX_RX_CLIENTS_E1 18 +#define ETH_MAX_RX_CLIENTS_E1H 28 +#define ETH_MAX_RX_CLIENTS_E2 152 + +/* Maximal statistics client Ids */ +#define MAX_STAT_COUNTER_ID_E1 36 +#define MAX_STAT_COUNTER_ID_E1H 56 +#define MAX_STAT_COUNTER_ID_E2 140 + +#define MAX_MAC_CREDIT_E1 192 /* Per Chip */ +#define MAX_MAC_CREDIT_E1H 256 /* Per Chip */ +#define MAX_MAC_CREDIT_E2 272 /* Per Path */ +#define MAX_VLAN_CREDIT_E1 0 /* Per Chip */ +#define MAX_VLAN_CREDIT_E1H 0 /* Per Chip */ +#define MAX_VLAN_CREDIT_E2 272 /* Per Path */ + +/* Maximal aggregation queues supported */ +#define ETH_MAX_AGGREGATION_QUEUES_E1 32 +#define ETH_MAX_AGGREGATION_QUEUES_E1H_E2 64 + +#define ETH_NUM_OF_MCAST_BINS 256 +#define ETH_NUM_OF_MCAST_ENGINES_E2 72 + +#define ETH_MIN_RX_CQES_WITHOUT_TPA (MAX_RAMRODS_PER_PORT + 3) +#define ETH_MIN_RX_CQES_WITH_TPA_E1 \ + (ETH_MAX_AGGREGATION_QUEUES_E1 + ETH_MIN_RX_CQES_WITHOUT_TPA) +#define ETH_MIN_RX_CQES_WITH_TPA_E1H_E2 \ + (ETH_MAX_AGGREGATION_QUEUES_E1H_E2 + ETH_MIN_RX_CQES_WITHOUT_TPA) + +#define DISABLE_STATISTIC_COUNTER_ID_VALUE 0 + + +/* This file defines HSI constants common to all microcode flows */ + +#define PROTOCOL_STATE_BIT_OFFSET 6 + +#define ETH_STATE (ETH_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET) +#define TOE_STATE (TOE_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET) +#define RDMA_STATE (RDMA_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET) + +/* microcode fixed page page size 4K (chains and ring segments) */ +#define MC_PAGE_SIZE 4096 + +/* Number of indices per slow-path SB */ +#define HC_SP_SB_MAX_INDICES 16 + +/* Number of indices per SB */ +#define HC_SB_MAX_INDICES_E1X 8 +#define HC_SB_MAX_INDICES_E2 8 + +#define HC_SB_MAX_SB_E1X 32 +#define HC_SB_MAX_SB_E2 136 + +#define HC_SP_SB_ID 0xde + +#define HC_SB_MAX_SM 2 + +#define HC_SB_MAX_DYNAMIC_INDICES 4 + +/* max number of slow path commands per port */ +#define MAX_RAMRODS_PER_PORT 8 + +/**** DEFINES FOR TIMERS/CLOCKS RESOLUTIONS ****/ + +#define TIMERS_TICK_SIZE_CHIP (1e-3) + +#define TSEMI_CLK1_RESUL_CHIP (1e-3) + +#define XSEMI_CLK1_RESUL_CHIP (1e-3) + +#define SDM_TIMER_TICK_RESUL_CHIP (4 * (1e-6)) +#define TSDM_TIMER_TICK_RESUL_CHIP (1 * (1e-6)) + +/**** END DEFINES FOR TIMERS/CLOCKS RESOLUTIONS ****/ + +#define XSTORM_IP_ID_ROLL_HALF 0x8000 +#define XSTORM_IP_ID_ROLL_ALL 0 + +#define FW_LOG_LIST_SIZE 50 + +#define NUM_OF_SAFC_BITS 16 +#define MAX_COS_NUMBER 4 +#define MAX_TRAFFIC_TYPES 8 +#define MAX_PFC_PRIORITIES 8 +#define MAX_VLAN_PRIORITIES 8 + /* used by array traffic_type_to_priority[] to mark traffic type \ + that is not mapped to priority*/ +#define LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED 0xFF + +#define C_ERES_PER_PAGE \ + (PAGE_SIZE / BITS_TO_BYTES(STRUCT_SIZE(event_ring_elem))) +#define C_ERE_PER_PAGE_MASK (C_ERES_PER_PAGE - 1) + +#define STATS_QUERY_CMD_COUNT 16 + +#define AFEX_LIST_TABLE_SIZE 4096 + +#define INVALID_VNIC_ID 0xFF + +#define UNDEF_IRO 0x80000000 + +/* used for defining the amount of FCoE tasks supported for PF */ +#define MAX_FCOE_FUNCS_PER_ENGINE 2 +#define MAX_NUM_FCOE_TASKS_PER_ENGINE 4096 + +#endif /* BNX2X_FW_DEFS_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h new file mode 100644 index 000000000..9e3b5a1e9 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h @@ -0,0 +1,40 @@ +/* bnx2x_fw_file_hdr.h: FW binary file header structure. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Vladislav Zolotarov + * Based on the original idea of John Wright <john.wright@hp.com>. + */ + +#ifndef BNX2X_INIT_FILE_HDR_H +#define BNX2X_INIT_FILE_HDR_H + +struct bnx2x_fw_file_section { + __be32 len; + __be32 offset; +}; + +struct bnx2x_fw_file_hdr { + struct bnx2x_fw_file_section init_ops; + struct bnx2x_fw_file_section init_ops_offsets; + struct bnx2x_fw_file_section init_data; + struct bnx2x_fw_file_section tsem_int_table_data; + struct bnx2x_fw_file_section tsem_pram_data; + struct bnx2x_fw_file_section usem_int_table_data; + struct bnx2x_fw_file_section usem_pram_data; + struct bnx2x_fw_file_section csem_int_table_data; + struct bnx2x_fw_file_section csem_pram_data; + struct bnx2x_fw_file_section xsem_int_table_data; + struct bnx2x_fw_file_section xsem_pram_data; + struct bnx2x_fw_file_section iro_arr; + struct bnx2x_fw_file_section fw_version; +}; + +#endif /* BNX2X_INIT_FILE_HDR_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h new file mode 100644 index 000000000..f8b810313 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -0,0 +1,6035 @@ +/* bnx2x_hsi.h: Qlogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ +#ifndef BNX2X_HSI_H +#define BNX2X_HSI_H + +#include "bnx2x_fw_defs.h" +#include "bnx2x_mfw_req.h" + +#define FW_ENCODE_32BIT_PATTERN 0x1e1e1e1e + +struct license_key { + u32 reserved[6]; + + u32 max_iscsi_conn; +#define BNX2X_MAX_ISCSI_TRGT_CONN_MASK 0xFFFF +#define BNX2X_MAX_ISCSI_TRGT_CONN_SHIFT 0 +#define BNX2X_MAX_ISCSI_INIT_CONN_MASK 0xFFFF0000 +#define BNX2X_MAX_ISCSI_INIT_CONN_SHIFT 16 + + u32 reserved_a; + + u32 max_fcoe_conn; +#define BNX2X_MAX_FCOE_TRGT_CONN_MASK 0xFFFF +#define BNX2X_MAX_FCOE_TRGT_CONN_SHIFT 0 +#define BNX2X_MAX_FCOE_INIT_CONN_MASK 0xFFFF0000 +#define BNX2X_MAX_FCOE_INIT_CONN_SHIFT 16 + + u32 reserved_b[4]; +}; + +/**************************************************************************** + * Shared HW configuration * + ****************************************************************************/ +#define PIN_CFG_NA 0x00000000 +#define PIN_CFG_GPIO0_P0 0x00000001 +#define PIN_CFG_GPIO1_P0 0x00000002 +#define PIN_CFG_GPIO2_P0 0x00000003 +#define PIN_CFG_GPIO3_P0 0x00000004 +#define PIN_CFG_GPIO0_P1 0x00000005 +#define PIN_CFG_GPIO1_P1 0x00000006 +#define PIN_CFG_GPIO2_P1 0x00000007 +#define PIN_CFG_GPIO3_P1 0x00000008 +#define PIN_CFG_EPIO0 0x00000009 +#define PIN_CFG_EPIO1 0x0000000a +#define PIN_CFG_EPIO2 0x0000000b +#define PIN_CFG_EPIO3 0x0000000c +#define PIN_CFG_EPIO4 0x0000000d +#define PIN_CFG_EPIO5 0x0000000e +#define PIN_CFG_EPIO6 0x0000000f +#define PIN_CFG_EPIO7 0x00000010 +#define PIN_CFG_EPIO8 0x00000011 +#define PIN_CFG_EPIO9 0x00000012 +#define PIN_CFG_EPIO10 0x00000013 +#define PIN_CFG_EPIO11 0x00000014 +#define PIN_CFG_EPIO12 0x00000015 +#define PIN_CFG_EPIO13 0x00000016 +#define PIN_CFG_EPIO14 0x00000017 +#define PIN_CFG_EPIO15 0x00000018 +#define PIN_CFG_EPIO16 0x00000019 +#define PIN_CFG_EPIO17 0x0000001a +#define PIN_CFG_EPIO18 0x0000001b +#define PIN_CFG_EPIO19 0x0000001c +#define PIN_CFG_EPIO20 0x0000001d +#define PIN_CFG_EPIO21 0x0000001e +#define PIN_CFG_EPIO22 0x0000001f +#define PIN_CFG_EPIO23 0x00000020 +#define PIN_CFG_EPIO24 0x00000021 +#define PIN_CFG_EPIO25 0x00000022 +#define PIN_CFG_EPIO26 0x00000023 +#define PIN_CFG_EPIO27 0x00000024 +#define PIN_CFG_EPIO28 0x00000025 +#define PIN_CFG_EPIO29 0x00000026 +#define PIN_CFG_EPIO30 0x00000027 +#define PIN_CFG_EPIO31 0x00000028 + +/* EPIO definition */ +#define EPIO_CFG_NA 0x00000000 +#define EPIO_CFG_EPIO0 0x00000001 +#define EPIO_CFG_EPIO1 0x00000002 +#define EPIO_CFG_EPIO2 0x00000003 +#define EPIO_CFG_EPIO3 0x00000004 +#define EPIO_CFG_EPIO4 0x00000005 +#define EPIO_CFG_EPIO5 0x00000006 +#define EPIO_CFG_EPIO6 0x00000007 +#define EPIO_CFG_EPIO7 0x00000008 +#define EPIO_CFG_EPIO8 0x00000009 +#define EPIO_CFG_EPIO9 0x0000000a +#define EPIO_CFG_EPIO10 0x0000000b +#define EPIO_CFG_EPIO11 0x0000000c +#define EPIO_CFG_EPIO12 0x0000000d +#define EPIO_CFG_EPIO13 0x0000000e +#define EPIO_CFG_EPIO14 0x0000000f +#define EPIO_CFG_EPIO15 0x00000010 +#define EPIO_CFG_EPIO16 0x00000011 +#define EPIO_CFG_EPIO17 0x00000012 +#define EPIO_CFG_EPIO18 0x00000013 +#define EPIO_CFG_EPIO19 0x00000014 +#define EPIO_CFG_EPIO20 0x00000015 +#define EPIO_CFG_EPIO21 0x00000016 +#define EPIO_CFG_EPIO22 0x00000017 +#define EPIO_CFG_EPIO23 0x00000018 +#define EPIO_CFG_EPIO24 0x00000019 +#define EPIO_CFG_EPIO25 0x0000001a +#define EPIO_CFG_EPIO26 0x0000001b +#define EPIO_CFG_EPIO27 0x0000001c +#define EPIO_CFG_EPIO28 0x0000001d +#define EPIO_CFG_EPIO29 0x0000001e +#define EPIO_CFG_EPIO30 0x0000001f +#define EPIO_CFG_EPIO31 0x00000020 + +struct mac_addr { + u32 upper; + u32 lower; +}; + +struct shared_hw_cfg { /* NVRAM Offset */ + /* Up to 16 bytes of NULL-terminated string */ + u8 part_num[16]; /* 0x104 */ + + u32 config; /* 0x114 */ + #define SHARED_HW_CFG_MDIO_VOLTAGE_MASK 0x00000001 + #define SHARED_HW_CFG_MDIO_VOLTAGE_SHIFT 0 + #define SHARED_HW_CFG_MDIO_VOLTAGE_1_2V 0x00000000 + #define SHARED_HW_CFG_MDIO_VOLTAGE_2_5V 0x00000001 + #define SHARED_HW_CFG_MCP_RST_ON_CORE_RST_EN 0x00000002 + + #define SHARED_HW_CFG_PORT_SWAP 0x00000004 + + #define SHARED_HW_CFG_BEACON_WOL_EN 0x00000008 + + #define SHARED_HW_CFG_PCIE_GEN3_DISABLED 0x00000000 + #define SHARED_HW_CFG_PCIE_GEN3_ENABLED 0x00000010 + + #define SHARED_HW_CFG_MFW_SELECT_MASK 0x00000700 + #define SHARED_HW_CFG_MFW_SELECT_SHIFT 8 + /* Whatever MFW found in NVM + (if multiple found, priority order is: NC-SI, UMP, IPMI) */ + #define SHARED_HW_CFG_MFW_SELECT_DEFAULT 0x00000000 + #define SHARED_HW_CFG_MFW_SELECT_NC_SI 0x00000100 + #define SHARED_HW_CFG_MFW_SELECT_UMP 0x00000200 + #define SHARED_HW_CFG_MFW_SELECT_IPMI 0x00000300 + /* Use SPIO4 as an arbiter between: 0-NC_SI, 1-IPMI + (can only be used when an add-in board, not BMC, pulls-down SPIO4) */ + #define SHARED_HW_CFG_MFW_SELECT_SPIO4_NC_SI_IPMI 0x00000400 + /* Use SPIO4 as an arbiter between: 0-UMP, 1-IPMI + (can only be used when an add-in board, not BMC, pulls-down SPIO4) */ + #define SHARED_HW_CFG_MFW_SELECT_SPIO4_UMP_IPMI 0x00000500 + /* Use SPIO4 as an arbiter between: 0-NC-SI, 1-UMP + (can only be used when an add-in board, not BMC, pulls-down SPIO4) */ + #define SHARED_HW_CFG_MFW_SELECT_SPIO4_NC_SI_UMP 0x00000600 + + #define SHARED_HW_CFG_LED_MODE_MASK 0x000f0000 + #define SHARED_HW_CFG_LED_MODE_SHIFT 16 + #define SHARED_HW_CFG_LED_MAC1 0x00000000 + #define SHARED_HW_CFG_LED_PHY1 0x00010000 + #define SHARED_HW_CFG_LED_PHY2 0x00020000 + #define SHARED_HW_CFG_LED_PHY3 0x00030000 + #define SHARED_HW_CFG_LED_MAC2 0x00040000 + #define SHARED_HW_CFG_LED_PHY4 0x00050000 + #define SHARED_HW_CFG_LED_PHY5 0x00060000 + #define SHARED_HW_CFG_LED_PHY6 0x00070000 + #define SHARED_HW_CFG_LED_MAC3 0x00080000 + #define SHARED_HW_CFG_LED_PHY7 0x00090000 + #define SHARED_HW_CFG_LED_PHY9 0x000a0000 + #define SHARED_HW_CFG_LED_PHY11 0x000b0000 + #define SHARED_HW_CFG_LED_MAC4 0x000c0000 + #define SHARED_HW_CFG_LED_PHY8 0x000d0000 + #define SHARED_HW_CFG_LED_EXTPHY1 0x000e0000 + #define SHARED_HW_CFG_LED_EXTPHY2 0x000f0000 + + + #define SHARED_HW_CFG_AN_ENABLE_MASK 0x3f000000 + #define SHARED_HW_CFG_AN_ENABLE_SHIFT 24 + #define SHARED_HW_CFG_AN_ENABLE_CL37 0x01000000 + #define SHARED_HW_CFG_AN_ENABLE_CL73 0x02000000 + #define SHARED_HW_CFG_AN_ENABLE_BAM 0x04000000 + #define SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION 0x08000000 + #define SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT 0x10000000 + #define SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY 0x20000000 + + #define SHARED_HW_CFG_SRIOV_MASK 0x40000000 + #define SHARED_HW_CFG_SRIOV_DISABLED 0x00000000 + #define SHARED_HW_CFG_SRIOV_ENABLED 0x40000000 + + #define SHARED_HW_CFG_ATC_MASK 0x80000000 + #define SHARED_HW_CFG_ATC_DISABLED 0x00000000 + #define SHARED_HW_CFG_ATC_ENABLED 0x80000000 + + u32 config2; /* 0x118 */ + /* one time auto detect grace period (in sec) */ + #define SHARED_HW_CFG_GRACE_PERIOD_MASK 0x000000ff + #define SHARED_HW_CFG_GRACE_PERIOD_SHIFT 0 + + #define SHARED_HW_CFG_PCIE_GEN2_ENABLED 0x00000100 + #define SHARED_HW_CFG_PCIE_GEN2_DISABLED 0x00000000 + + /* The default value for the core clock is 250MHz and it is + achieved by setting the clock change to 4 */ + #define SHARED_HW_CFG_CLOCK_CHANGE_MASK 0x00000e00 + #define SHARED_HW_CFG_CLOCK_CHANGE_SHIFT 9 + + #define SHARED_HW_CFG_SMBUS_TIMING_MASK 0x00001000 + #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000 + #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000 + + #define SHARED_HW_CFG_HIDE_PORT1 0x00002000 + + #define SHARED_HW_CFG_WOL_CAPABLE_MASK 0x00004000 + #define SHARED_HW_CFG_WOL_CAPABLE_DISABLED 0x00000000 + #define SHARED_HW_CFG_WOL_CAPABLE_ENABLED 0x00004000 + + /* Output low when PERST is asserted */ + #define SHARED_HW_CFG_SPIO4_FOLLOW_PERST_MASK 0x00008000 + #define SHARED_HW_CFG_SPIO4_FOLLOW_PERST_DISABLED 0x00000000 + #define SHARED_HW_CFG_SPIO4_FOLLOW_PERST_ENABLED 0x00008000 + + #define SHARED_HW_CFG_PCIE_GEN2_PREEMPHASIS_MASK 0x00070000 + #define SHARED_HW_CFG_PCIE_GEN2_PREEMPHASIS_SHIFT 16 + #define SHARED_HW_CFG_PCIE_GEN2_PREEMPHASIS_HW 0x00000000 + #define SHARED_HW_CFG_PCIE_GEN2_PREEMPHASIS_0DB 0x00010000 + #define SHARED_HW_CFG_PCIE_GEN2_PREEMPHASIS_3_5DB 0x00020000 + #define SHARED_HW_CFG_PCIE_GEN2_PREEMPHASIS_6_0DB 0x00030000 + + /* The fan failure mechanism is usually related to the PHY type + since the power consumption of the board is determined by the PHY. + Currently, fan is required for most designs with SFX7101, BCM8727 + and BCM8481. If a fan is not required for a board which uses one + of those PHYs, this field should be set to "Disabled". If a fan is + required for a different PHY type, this option should be set to + "Enabled". The fan failure indication is expected on SPIO5 */ + #define SHARED_HW_CFG_FAN_FAILURE_MASK 0x00180000 + #define SHARED_HW_CFG_FAN_FAILURE_SHIFT 19 + #define SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE 0x00000000 + #define SHARED_HW_CFG_FAN_FAILURE_DISABLED 0x00080000 + #define SHARED_HW_CFG_FAN_FAILURE_ENABLED 0x00100000 + + /* ASPM Power Management support */ + #define SHARED_HW_CFG_ASPM_SUPPORT_MASK 0x00600000 + #define SHARED_HW_CFG_ASPM_SUPPORT_SHIFT 21 + #define SHARED_HW_CFG_ASPM_SUPPORT_L0S_L1_ENABLED 0x00000000 + #define SHARED_HW_CFG_ASPM_SUPPORT_L0S_DISABLED 0x00200000 + #define SHARED_HW_CFG_ASPM_SUPPORT_L1_DISABLED 0x00400000 + #define SHARED_HW_CFG_ASPM_SUPPORT_L0S_L1_DISABLED 0x00600000 + + /* The value of PM_TL_IGNORE_REQS (bit0) in PCI register + tl_control_0 (register 0x2800) */ + #define SHARED_HW_CFG_PREVENT_L1_ENTRY_MASK 0x00800000 + #define SHARED_HW_CFG_PREVENT_L1_ENTRY_DISABLED 0x00000000 + #define SHARED_HW_CFG_PREVENT_L1_ENTRY_ENABLED 0x00800000 + + #define SHARED_HW_CFG_PORT_MODE_MASK 0x01000000 + #define SHARED_HW_CFG_PORT_MODE_2 0x00000000 + #define SHARED_HW_CFG_PORT_MODE_4 0x01000000 + + #define SHARED_HW_CFG_PATH_SWAP_MASK 0x02000000 + #define SHARED_HW_CFG_PATH_SWAP_DISABLED 0x00000000 + #define SHARED_HW_CFG_PATH_SWAP_ENABLED 0x02000000 + + /* Set the MDC/MDIO access for the first external phy */ + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK 0x1C000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT 26 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE 0x00000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0 0x04000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1 0x08000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH 0x0c000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED 0x10000000 + + /* Set the MDC/MDIO access for the second external phy */ + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK 0xE0000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT 29 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_PHY_TYPE 0x00000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_EMAC0 0x20000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_EMAC1 0x40000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_BOTH 0x60000000 + #define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SWAPPED 0x80000000 + + u32 config_3; /* 0x11C */ + #define SHARED_HW_CFG_EXTENDED_MF_MODE_MASK 0x00000F00 + #define SHARED_HW_CFG_EXTENDED_MF_MODE_SHIFT 8 + #define SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5 0x00000000 + #define SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR2_DOT_0 0x00000100 + + u32 ump_nc_si_config; /* 0x120 */ + #define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_MASK 0x00000003 + #define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_SHIFT 0 + #define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_MAC 0x00000000 + #define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_PHY 0x00000001 + #define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_MII 0x00000000 + #define SHARED_HW_CFG_UMP_NC_SI_MII_MODE_RMII 0x00000002 + + #define SHARED_HW_CFG_UMP_NC_SI_NUM_DEVS_MASK 0x00000f00 + #define SHARED_HW_CFG_UMP_NC_SI_NUM_DEVS_SHIFT 8 + + #define SHARED_HW_CFG_UMP_NC_SI_EXT_PHY_TYPE_MASK 0x00ff0000 + #define SHARED_HW_CFG_UMP_NC_SI_EXT_PHY_TYPE_SHIFT 16 + #define SHARED_HW_CFG_UMP_NC_SI_EXT_PHY_TYPE_NONE 0x00000000 + #define SHARED_HW_CFG_UMP_NC_SI_EXT_PHY_TYPE_BCM5221 0x00010000 + + u32 board; /* 0x124 */ + #define SHARED_HW_CFG_E3_I2C_MUX0_MASK 0x0000003F + #define SHARED_HW_CFG_E3_I2C_MUX0_SHIFT 0 + #define SHARED_HW_CFG_E3_I2C_MUX1_MASK 0x00000FC0 + #define SHARED_HW_CFG_E3_I2C_MUX1_SHIFT 6 + /* Use the PIN_CFG_XXX defines on top */ + #define SHARED_HW_CFG_BOARD_REV_MASK 0x00ff0000 + #define SHARED_HW_CFG_BOARD_REV_SHIFT 16 + + #define SHARED_HW_CFG_BOARD_MAJOR_VER_MASK 0x0f000000 + #define SHARED_HW_CFG_BOARD_MAJOR_VER_SHIFT 24 + + #define SHARED_HW_CFG_BOARD_MINOR_VER_MASK 0xf0000000 + #define SHARED_HW_CFG_BOARD_MINOR_VER_SHIFT 28 + + u32 wc_lane_config; /* 0x128 */ + #define SHARED_HW_CFG_LANE_SWAP_CFG_MASK 0x0000FFFF + #define SHARED_HW_CFG_LANE_SWAP_CFG_SHIFT 0 + #define SHARED_HW_CFG_LANE_SWAP_CFG_32103210 0x00001b1b + #define SHARED_HW_CFG_LANE_SWAP_CFG_32100123 0x00001be4 + #define SHARED_HW_CFG_LANE_SWAP_CFG_01233210 0x0000e41b + #define SHARED_HW_CFG_LANE_SWAP_CFG_01230123 0x0000e4e4 + #define SHARED_HW_CFG_LANE_SWAP_CFG_TX_MASK 0x000000FF + #define SHARED_HW_CFG_LANE_SWAP_CFG_TX_SHIFT 0 + #define SHARED_HW_CFG_LANE_SWAP_CFG_RX_MASK 0x0000FF00 + #define SHARED_HW_CFG_LANE_SWAP_CFG_RX_SHIFT 8 + + /* TX lane Polarity swap */ + #define SHARED_HW_CFG_TX_LANE0_POL_FLIP_ENABLED 0x00010000 + #define SHARED_HW_CFG_TX_LANE1_POL_FLIP_ENABLED 0x00020000 + #define SHARED_HW_CFG_TX_LANE2_POL_FLIP_ENABLED 0x00040000 + #define SHARED_HW_CFG_TX_LANE3_POL_FLIP_ENABLED 0x00080000 + /* TX lane Polarity swap */ + #define SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED 0x00100000 + #define SHARED_HW_CFG_RX_LANE1_POL_FLIP_ENABLED 0x00200000 + #define SHARED_HW_CFG_RX_LANE2_POL_FLIP_ENABLED 0x00400000 + #define SHARED_HW_CFG_RX_LANE3_POL_FLIP_ENABLED 0x00800000 + + /* Selects the port layout of the board */ + #define SHARED_HW_CFG_E3_PORT_LAYOUT_MASK 0x0F000000 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_SHIFT 24 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_2P_01 0x00000000 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_2P_10 0x01000000 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_4P_0123 0x02000000 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_4P_1032 0x03000000 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_4P_2301 0x04000000 + #define SHARED_HW_CFG_E3_PORT_LAYOUT_4P_3210 0x05000000 +}; + + +/**************************************************************************** + * Port HW configuration * + ****************************************************************************/ +struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ + + u32 pci_id; + #define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000 + #define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff + + u32 pci_sub_id; + #define PORT_HW_CFG_PCI_SUBSYS_DEVICE_ID_MASK 0xffff0000 + #define PORT_HW_CFG_PCI_SUBSYS_VENDOR_ID_MASK 0x0000ffff + + u32 power_dissipated; + #define PORT_HW_CFG_POWER_DIS_D0_MASK 0x000000ff + #define PORT_HW_CFG_POWER_DIS_D0_SHIFT 0 + #define PORT_HW_CFG_POWER_DIS_D1_MASK 0x0000ff00 + #define PORT_HW_CFG_POWER_DIS_D1_SHIFT 8 + #define PORT_HW_CFG_POWER_DIS_D2_MASK 0x00ff0000 + #define PORT_HW_CFG_POWER_DIS_D2_SHIFT 16 + #define PORT_HW_CFG_POWER_DIS_D3_MASK 0xff000000 + #define PORT_HW_CFG_POWER_DIS_D3_SHIFT 24 + + u32 power_consumed; + #define PORT_HW_CFG_POWER_CONS_D0_MASK 0x000000ff + #define PORT_HW_CFG_POWER_CONS_D0_SHIFT 0 + #define PORT_HW_CFG_POWER_CONS_D1_MASK 0x0000ff00 + #define PORT_HW_CFG_POWER_CONS_D1_SHIFT 8 + #define PORT_HW_CFG_POWER_CONS_D2_MASK 0x00ff0000 + #define PORT_HW_CFG_POWER_CONS_D2_SHIFT 16 + #define PORT_HW_CFG_POWER_CONS_D3_MASK 0xff000000 + #define PORT_HW_CFG_POWER_CONS_D3_SHIFT 24 + + u32 mac_upper; + #define PORT_HW_CFG_UPPERMAC_MASK 0x0000ffff + #define PORT_HW_CFG_UPPERMAC_SHIFT 0 + u32 mac_lower; + + u32 iscsi_mac_upper; /* Upper 16 bits are always zeroes */ + u32 iscsi_mac_lower; + + u32 rdma_mac_upper; /* Upper 16 bits are always zeroes */ + u32 rdma_mac_lower; + + u32 serdes_config; + #define PORT_HW_CFG_SERDES_TX_DRV_PRE_EMPHASIS_MASK 0x0000ffff + #define PORT_HW_CFG_SERDES_TX_DRV_PRE_EMPHASIS_SHIFT 0 + + #define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK 0xffff0000 + #define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT 16 + + + /* Default values: 2P-64, 4P-32 */ + u32 pf_config; /* 0x158 */ + #define PORT_HW_CFG_PF_NUM_VF_MASK 0x0000007F + #define PORT_HW_CFG_PF_NUM_VF_SHIFT 0 + + /* Default values: 17 */ + #define PORT_HW_CFG_PF_NUM_MSIX_VECTORS_MASK 0x00007F00 + #define PORT_HW_CFG_PF_NUM_MSIX_VECTORS_SHIFT 8 + + #define PORT_HW_CFG_ENABLE_FLR_MASK 0x00010000 + #define PORT_HW_CFG_FLR_ENABLED 0x00010000 + + u32 vf_config; /* 0x15C */ + #define PORT_HW_CFG_VF_NUM_MSIX_VECTORS_MASK 0x0000007F + #define PORT_HW_CFG_VF_NUM_MSIX_VECTORS_SHIFT 0 + + #define PORT_HW_CFG_VF_PCI_DEVICE_ID_MASK 0xFFFF0000 + #define PORT_HW_CFG_VF_PCI_DEVICE_ID_SHIFT 16 + + u32 mf_pci_id; /* 0x160 */ + #define PORT_HW_CFG_MF_PCI_DEVICE_ID_MASK 0x0000FFFF + #define PORT_HW_CFG_MF_PCI_DEVICE_ID_SHIFT 0 + + /* Controls the TX laser of the SFP+ module */ + u32 sfp_ctrl; /* 0x164 */ + #define PORT_HW_CFG_TX_LASER_MASK 0x000000FF + #define PORT_HW_CFG_TX_LASER_SHIFT 0 + #define PORT_HW_CFG_TX_LASER_MDIO 0x00000000 + #define PORT_HW_CFG_TX_LASER_GPIO0 0x00000001 + #define PORT_HW_CFG_TX_LASER_GPIO1 0x00000002 + #define PORT_HW_CFG_TX_LASER_GPIO2 0x00000003 + #define PORT_HW_CFG_TX_LASER_GPIO3 0x00000004 + + /* Controls the fault module LED of the SFP+ */ + #define PORT_HW_CFG_FAULT_MODULE_LED_MASK 0x0000FF00 + #define PORT_HW_CFG_FAULT_MODULE_LED_SHIFT 8 + #define PORT_HW_CFG_FAULT_MODULE_LED_GPIO0 0x00000000 + #define PORT_HW_CFG_FAULT_MODULE_LED_GPIO1 0x00000100 + #define PORT_HW_CFG_FAULT_MODULE_LED_GPIO2 0x00000200 + #define PORT_HW_CFG_FAULT_MODULE_LED_GPIO3 0x00000300 + #define PORT_HW_CFG_FAULT_MODULE_LED_DISABLED 0x00000400 + + /* The output pin TX_DIS that controls the TX laser of the SFP+ + module. Use the PIN_CFG_XXX defines on top */ + u32 e3_sfp_ctrl; /* 0x168 */ + #define PORT_HW_CFG_E3_TX_LASER_MASK 0x000000FF + #define PORT_HW_CFG_E3_TX_LASER_SHIFT 0 + + /* The output pin for SFPP_TYPE which turns on the Fault module LED */ + #define PORT_HW_CFG_E3_FAULT_MDL_LED_MASK 0x0000FF00 + #define PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT 8 + + /* The input pin MOD_ABS that indicates whether SFP+ module is + present or not. Use the PIN_CFG_XXX defines on top */ + #define PORT_HW_CFG_E3_MOD_ABS_MASK 0x00FF0000 + #define PORT_HW_CFG_E3_MOD_ABS_SHIFT 16 + + /* The output pin PWRDIS_SFP_X which disable the power of the SFP+ + module. Use the PIN_CFG_XXX defines on top */ + #define PORT_HW_CFG_E3_PWR_DIS_MASK 0xFF000000 + #define PORT_HW_CFG_E3_PWR_DIS_SHIFT 24 + + /* + * The input pin which signals module transmit fault. Use the + * PIN_CFG_XXX defines on top + */ + u32 e3_cmn_pin_cfg; /* 0x16C */ + #define PORT_HW_CFG_E3_TX_FAULT_MASK 0x000000FF + #define PORT_HW_CFG_E3_TX_FAULT_SHIFT 0 + + /* The output pin which reset the PHY. Use the PIN_CFG_XXX defines on + top */ + #define PORT_HW_CFG_E3_PHY_RESET_MASK 0x0000FF00 + #define PORT_HW_CFG_E3_PHY_RESET_SHIFT 8 + + /* + * The output pin which powers down the PHY. Use the PIN_CFG_XXX + * defines on top + */ + #define PORT_HW_CFG_E3_PWR_DOWN_MASK 0x00FF0000 + #define PORT_HW_CFG_E3_PWR_DOWN_SHIFT 16 + + /* The output pin values BSC_SEL which selects the I2C for this port + in the I2C Mux */ + #define PORT_HW_CFG_E3_I2C_MUX0_MASK 0x01000000 + #define PORT_HW_CFG_E3_I2C_MUX1_MASK 0x02000000 + + + /* + * The input pin I_FAULT which indicate over-current has occurred. + * Use the PIN_CFG_XXX defines on top + */ + u32 e3_cmn_pin_cfg1; /* 0x170 */ + #define PORT_HW_CFG_E3_OVER_CURRENT_MASK 0x000000FF + #define PORT_HW_CFG_E3_OVER_CURRENT_SHIFT 0 + + /* pause on host ring */ + u32 generic_features; /* 0x174 */ + #define PORT_HW_CFG_PAUSE_ON_HOST_RING_MASK 0x00000001 + #define PORT_HW_CFG_PAUSE_ON_HOST_RING_SHIFT 0 + #define PORT_HW_CFG_PAUSE_ON_HOST_RING_DISABLED 0x00000000 + #define PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED 0x00000001 + + /* SFP+ Tx Equalization: NIC recommended and tested value is 0xBEB2 + * LOM recommended and tested value is 0xBEB2. Using a different + * value means using a value not tested by BRCM + */ + u32 sfi_tap_values; /* 0x178 */ + #define PORT_HW_CFG_TX_EQUALIZATION_MASK 0x0000FFFF + #define PORT_HW_CFG_TX_EQUALIZATION_SHIFT 0 + + /* SFP+ Tx driver broadcast IDRIVER: NIC recommended and tested + * value is 0x2. LOM recommended and tested value is 0x2. Using a + * different value means using a value not tested by BRCM + */ + #define PORT_HW_CFG_TX_DRV_BROADCAST_MASK 0x000F0000 + #define PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT 16 + /* Set non-default values for TXFIR in SFP mode. */ + #define PORT_HW_CFG_TX_DRV_IFIR_MASK 0x00F00000 + #define PORT_HW_CFG_TX_DRV_IFIR_SHIFT 20 + + /* Set non-default values for IPREDRIVER in SFP mode. */ + #define PORT_HW_CFG_TX_DRV_IPREDRIVER_MASK 0x0F000000 + #define PORT_HW_CFG_TX_DRV_IPREDRIVER_SHIFT 24 + + /* Set non-default values for POST2 in SFP mode. */ + #define PORT_HW_CFG_TX_DRV_POST2_MASK 0xF0000000 + #define PORT_HW_CFG_TX_DRV_POST2_SHIFT 28 + + u32 reserved0[5]; /* 0x17c */ + + u32 aeu_int_mask; /* 0x190 */ + + u32 media_type; /* 0x194 */ + #define PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK 0x000000FF + #define PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT 0 + + #define PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK 0x0000FF00 + #define PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT 8 + + #define PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK 0x00FF0000 + #define PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT 16 + + /* 4 times 16 bits for all 4 lanes. In case external PHY is present + (not direct mode), those values will not take effect on the 4 XGXS + lanes. For some external PHYs (such as 8706 and 8726) the values + will be used to configure the external PHY in those cases, not + all 4 values are needed. */ + u16 xgxs_config_rx[4]; /* 0x198 */ + u16 xgxs_config_tx[4]; /* 0x1A0 */ + + /* For storing FCOE mac on shared memory */ + u32 fcoe_fip_mac_upper; + #define PORT_HW_CFG_FCOE_UPPERMAC_MASK 0x0000ffff + #define PORT_HW_CFG_FCOE_UPPERMAC_SHIFT 0 + u32 fcoe_fip_mac_lower; + + u32 fcoe_wwn_port_name_upper; + u32 fcoe_wwn_port_name_lower; + + u32 fcoe_wwn_node_name_upper; + u32 fcoe_wwn_node_name_lower; + + u32 Reserved1[49]; /* 0x1C0 */ + + /* Enable RJ45 magjack pair swapping on 10GBase-T PHY (0=default), + 84833 only */ + u32 xgbt_phy_cfg; /* 0x284 */ + #define PORT_HW_CFG_RJ45_PAIR_SWAP_MASK 0x000000FF + #define PORT_HW_CFG_RJ45_PAIR_SWAP_SHIFT 0 + + u32 default_cfg; /* 0x288 */ + #define PORT_HW_CFG_GPIO0_CONFIG_MASK 0x00000003 + #define PORT_HW_CFG_GPIO0_CONFIG_SHIFT 0 + #define PORT_HW_CFG_GPIO0_CONFIG_NA 0x00000000 + #define PORT_HW_CFG_GPIO0_CONFIG_LOW 0x00000001 + #define PORT_HW_CFG_GPIO0_CONFIG_HIGH 0x00000002 + #define PORT_HW_CFG_GPIO0_CONFIG_INPUT 0x00000003 + + #define PORT_HW_CFG_GPIO1_CONFIG_MASK 0x0000000C + #define PORT_HW_CFG_GPIO1_CONFIG_SHIFT 2 + #define PORT_HW_CFG_GPIO1_CONFIG_NA 0x00000000 + #define PORT_HW_CFG_GPIO1_CONFIG_LOW 0x00000004 + #define PORT_HW_CFG_GPIO1_CONFIG_HIGH 0x00000008 + #define PORT_HW_CFG_GPIO1_CONFIG_INPUT 0x0000000c + + #define PORT_HW_CFG_GPIO2_CONFIG_MASK 0x00000030 + #define PORT_HW_CFG_GPIO2_CONFIG_SHIFT 4 + #define PORT_HW_CFG_GPIO2_CONFIG_NA 0x00000000 + #define PORT_HW_CFG_GPIO2_CONFIG_LOW 0x00000010 + #define PORT_HW_CFG_GPIO2_CONFIG_HIGH 0x00000020 + #define PORT_HW_CFG_GPIO2_CONFIG_INPUT 0x00000030 + + #define PORT_HW_CFG_GPIO3_CONFIG_MASK 0x000000C0 + #define PORT_HW_CFG_GPIO3_CONFIG_SHIFT 6 + #define PORT_HW_CFG_GPIO3_CONFIG_NA 0x00000000 + #define PORT_HW_CFG_GPIO3_CONFIG_LOW 0x00000040 + #define PORT_HW_CFG_GPIO3_CONFIG_HIGH 0x00000080 + #define PORT_HW_CFG_GPIO3_CONFIG_INPUT 0x000000c0 + + /* When KR link is required to be set to force which is not + KR-compliant, this parameter determine what is the trigger for it. + When GPIO is selected, low input will force the speed. Currently + default speed is 1G. In the future, it may be widen to select the + forced speed in with another parameter. Note when force-1G is + enabled, it override option 56: Link Speed option. */ + #define PORT_HW_CFG_FORCE_KR_ENABLER_MASK 0x00000F00 + #define PORT_HW_CFG_FORCE_KR_ENABLER_SHIFT 8 + #define PORT_HW_CFG_FORCE_KR_ENABLER_NOT_FORCED 0x00000000 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P0 0x00000100 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P0 0x00000200 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P0 0x00000300 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P0 0x00000400 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P1 0x00000500 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P1 0x00000600 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P1 0x00000700 + #define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P1 0x00000800 + #define PORT_HW_CFG_FORCE_KR_ENABLER_FORCED 0x00000900 + /* Enable to determine with which GPIO to reset the external phy */ + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK 0x000F0000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT 16 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_PHY_TYPE 0x00000000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0 0x00010000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0 0x00020000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0 0x00030000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0 0x00040000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1 0x00050000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1 0x00060000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1 0x00070000 + #define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1 0x00080000 + + /* Enable BAM on KR */ + #define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000 + #define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20 + #define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED 0x00000000 + #define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED 0x00100000 + + /* Enable Common Mode Sense */ + #define PORT_HW_CFG_ENABLE_CMS_MASK 0x00200000 + #define PORT_HW_CFG_ENABLE_CMS_SHIFT 21 + #define PORT_HW_CFG_ENABLE_CMS_DISABLED 0x00000000 + #define PORT_HW_CFG_ENABLE_CMS_ENABLED 0x00200000 + + /* Determine the Serdes electrical interface */ + #define PORT_HW_CFG_NET_SERDES_IF_MASK 0x0F000000 + #define PORT_HW_CFG_NET_SERDES_IF_SHIFT 24 + #define PORT_HW_CFG_NET_SERDES_IF_SGMII 0x00000000 + #define PORT_HW_CFG_NET_SERDES_IF_XFI 0x01000000 + #define PORT_HW_CFG_NET_SERDES_IF_SFI 0x02000000 + #define PORT_HW_CFG_NET_SERDES_IF_KR 0x03000000 + #define PORT_HW_CFG_NET_SERDES_IF_DXGXS 0x04000000 + #define PORT_HW_CFG_NET_SERDES_IF_KR2 0x05000000 + + + u32 speed_capability_mask2; /* 0x28C */ + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_10M_FULL 0x00000001 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3__ 0x00000002 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3___ 0x00000004 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_100M_FULL 0x00000008 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_1G 0x00000010 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_2_DOT_5G 0x00000020 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_10G 0x00000040 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_20G 0x00000080 + + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_MASK 0xFFFF0000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_SHIFT 16 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_10M_FULL 0x00010000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0__ 0x00020000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0___ 0x00040000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_100M_FULL 0x00080000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_1G 0x00100000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_2_DOT_5G 0x00200000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_10G 0x00400000 + #define PORT_HW_CFG_SPEED_CAPABILITY2_D0_20G 0x00800000 + + + /* In the case where two media types (e.g. copper and fiber) are + present and electrically active at the same time, PHY Selection + will determine which of the two PHYs will be designated as the + Active PHY and used for a connection to the network. */ + u32 multi_phy_config; /* 0x290 */ + #define PORT_HW_CFG_PHY_SELECTION_MASK 0x00000007 + #define PORT_HW_CFG_PHY_SELECTION_SHIFT 0 + #define PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT 0x00000000 + #define PORT_HW_CFG_PHY_SELECTION_FIRST_PHY 0x00000001 + #define PORT_HW_CFG_PHY_SELECTION_SECOND_PHY 0x00000002 + #define PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY 0x00000003 + #define PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY 0x00000004 + + /* When enabled, all second phy nvram parameters will be swapped + with the first phy parameters */ + #define PORT_HW_CFG_PHY_SWAPPED_MASK 0x00000008 + #define PORT_HW_CFG_PHY_SWAPPED_SHIFT 3 + #define PORT_HW_CFG_PHY_SWAPPED_DISABLED 0x00000000 + #define PORT_HW_CFG_PHY_SWAPPED_ENABLED 0x00000008 + + + /* Address of the second external phy */ + u32 external_phy_config2; /* 0x294 */ + #define PORT_HW_CFG_XGXS_EXT_PHY2_ADDR_MASK 0x000000FF + #define PORT_HW_CFG_XGXS_EXT_PHY2_ADDR_SHIFT 0 + + /* The second XGXS external PHY type */ + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_MASK 0x0000FF00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_SHIFT 8 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_DIRECT 0x00000000 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8071 0x00000100 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8072 0x00000200 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8073 0x00000300 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8705 0x00000400 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8706 0x00000500 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8726 0x00000600 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8481 0x00000700 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_SFX7101 0x00000800 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8727 0x00000900 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8727_NOC 0x00000a00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84823 0x00000b00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54640 0x00000c00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84833 0x00000d00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54618SE 0x00000e00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8722 0x00000f00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54616 0x00001000 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84834 0x00001100 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84858 0x00001200 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_FAILURE 0x0000fd00 + #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_NOT_CONN 0x0000ff00 + + + /* 4 times 16 bits for all 4 lanes. For some external PHYs (such as + 8706, 8726 and 8727) not all 4 values are needed. */ + u16 xgxs_config2_rx[4]; /* 0x296 */ + u16 xgxs_config2_tx[4]; /* 0x2A0 */ + + u32 lane_config; + #define PORT_HW_CFG_LANE_SWAP_CFG_MASK 0x0000ffff + #define PORT_HW_CFG_LANE_SWAP_CFG_SHIFT 0 + /* AN and forced */ + #define PORT_HW_CFG_LANE_SWAP_CFG_01230123 0x00001b1b + /* forced only */ + #define PORT_HW_CFG_LANE_SWAP_CFG_01233210 0x00001be4 + /* forced only */ + #define PORT_HW_CFG_LANE_SWAP_CFG_31203120 0x0000d8d8 + /* forced only */ + #define PORT_HW_CFG_LANE_SWAP_CFG_32103210 0x0000e4e4 + #define PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK 0x000000ff + #define PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT 0 + #define PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK 0x0000ff00 + #define PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT 8 + #define PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK 0x0000c000 + #define PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT 14 + + /* Indicate whether to swap the external phy polarity */ + #define PORT_HW_CFG_SWAP_PHY_POLARITY_MASK 0x00010000 + #define PORT_HW_CFG_SWAP_PHY_POLARITY_DISABLED 0x00000000 + #define PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED 0x00010000 + + + u32 external_phy_config; + #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff + #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT 0 + + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK 0x0000ff00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SHIFT 8 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT 0x00000000 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8071 0x00000100 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072 0x00000200 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073 0x00000300 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705 0x00000400 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726 0x00000600 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 0x00000900 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC 0x00000a00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823 0x00000b00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54640 0x00000c00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833 0x00000d00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE 0x00000e00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722 0x00000f00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616 0x00001000 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834 0x00001100 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858 0x00001200 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT_WC 0x0000fc00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 + #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 + + #define PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK 0x00ff0000 + #define PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT 16 + + #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK 0xff000000 + #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_SHIFT 24 + #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT 0x00000000 + #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482 0x01000000 + #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT_SD 0x02000000 + #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN 0xff000000 + + u32 speed_capability_mask; + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_MASK 0x0000ffff + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_SHIFT 0 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_10M_FULL 0x00000001 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_10M_HALF 0x00000002 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_100M_HALF 0x00000004 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_100M_FULL 0x00000008 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_1G 0x00000010 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_2_5G 0x00000020 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_10G 0x00000040 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_20G 0x00000080 + #define PORT_HW_CFG_SPEED_CAPABILITY_D3_RESERVED 0x0000f000 + + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK 0xffff0000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_SHIFT 16 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL 0x00010000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF 0x00020000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF 0x00040000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL 0x00080000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_1G 0x00100000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G 0x00200000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_10G 0x00400000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_20G 0x00800000 + #define PORT_HW_CFG_SPEED_CAPABILITY_D0_RESERVED 0xf0000000 + + /* A place to hold the original MAC address as a backup */ + u32 backup_mac_upper; /* 0x2B4 */ + u32 backup_mac_lower; /* 0x2B8 */ + +}; + + +/**************************************************************************** + * Shared Feature configuration * + ****************************************************************************/ +struct shared_feat_cfg { /* NVRAM Offset */ + + u32 config; /* 0x450 */ + #define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001 + + /* Use NVRAM values instead of HW default values */ + #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_MASK \ + 0x00000002 + #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_DISABLED \ + 0x00000000 + #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED \ + 0x00000002 + + #define SHARED_FEAT_CFG_NCSI_ID_METHOD_MASK 0x00000008 + #define SHARED_FEAT_CFG_NCSI_ID_METHOD_SPIO 0x00000000 + #define SHARED_FEAT_CFG_NCSI_ID_METHOD_NVRAM 0x00000008 + + #define SHARED_FEAT_CFG_NCSI_ID_MASK 0x00000030 + #define SHARED_FEAT_CFG_NCSI_ID_SHIFT 4 + + /* Override the OTP back to single function mode. When using GPIO, + high means only SF, 0 is according to CLP configuration */ + #define SHARED_FEAT_CFG_FORCE_SF_MODE_MASK 0x00000700 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_SHIFT 8 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED 0x00000000 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF 0x00000100 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4 0x00000200 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE 0x00000400 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE 0x00000500 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE 0x00000600 + #define SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE 0x00000700 + + /* The interval in seconds between sending LLDP packets. Set to zero + to disable the feature */ + #define SHARED_FEAT_CFG_LLDP_XMIT_INTERVAL_MASK 0x00ff0000 + #define SHARED_FEAT_CFG_LLDP_XMIT_INTERVAL_SHIFT 16 + + /* The assigned device type ID for LLDP usage */ + #define SHARED_FEAT_CFG_LLDP_DEVICE_TYPE_ID_MASK 0xff000000 + #define SHARED_FEAT_CFG_LLDP_DEVICE_TYPE_ID_SHIFT 24 + +}; + + +/**************************************************************************** + * Port Feature configuration * + ****************************************************************************/ +struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ + + u32 config; + #define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f + #define PORT_FEATURE_BAR1_SIZE_SHIFT 0 + #define PORT_FEATURE_BAR1_SIZE_DISABLED 0x00000000 + #define PORT_FEATURE_BAR1_SIZE_64K 0x00000001 + #define PORT_FEATURE_BAR1_SIZE_128K 0x00000002 + #define PORT_FEATURE_BAR1_SIZE_256K 0x00000003 + #define PORT_FEATURE_BAR1_SIZE_512K 0x00000004 + #define PORT_FEATURE_BAR1_SIZE_1M 0x00000005 + #define PORT_FEATURE_BAR1_SIZE_2M 0x00000006 + #define PORT_FEATURE_BAR1_SIZE_4M 0x00000007 + #define PORT_FEATURE_BAR1_SIZE_8M 0x00000008 + #define PORT_FEATURE_BAR1_SIZE_16M 0x00000009 + #define PORT_FEATURE_BAR1_SIZE_32M 0x0000000a + #define PORT_FEATURE_BAR1_SIZE_64M 0x0000000b + #define PORT_FEATURE_BAR1_SIZE_128M 0x0000000c + #define PORT_FEATURE_BAR1_SIZE_256M 0x0000000d + #define PORT_FEATURE_BAR1_SIZE_512M 0x0000000e + #define PORT_FEATURE_BAR1_SIZE_1G 0x0000000f + #define PORT_FEATURE_BAR2_SIZE_MASK 0x000000f0 + #define PORT_FEATURE_BAR2_SIZE_SHIFT 4 + #define PORT_FEATURE_BAR2_SIZE_DISABLED 0x00000000 + #define PORT_FEATURE_BAR2_SIZE_64K 0x00000010 + #define PORT_FEATURE_BAR2_SIZE_128K 0x00000020 + #define PORT_FEATURE_BAR2_SIZE_256K 0x00000030 + #define PORT_FEATURE_BAR2_SIZE_512K 0x00000040 + #define PORT_FEATURE_BAR2_SIZE_1M 0x00000050 + #define PORT_FEATURE_BAR2_SIZE_2M 0x00000060 + #define PORT_FEATURE_BAR2_SIZE_4M 0x00000070 + #define PORT_FEATURE_BAR2_SIZE_8M 0x00000080 + #define PORT_FEATURE_BAR2_SIZE_16M 0x00000090 + #define PORT_FEATURE_BAR2_SIZE_32M 0x000000a0 + #define PORT_FEATURE_BAR2_SIZE_64M 0x000000b0 + #define PORT_FEATURE_BAR2_SIZE_128M 0x000000c0 + #define PORT_FEATURE_BAR2_SIZE_256M 0x000000d0 + #define PORT_FEATURE_BAR2_SIZE_512M 0x000000e0 + #define PORT_FEATURE_BAR2_SIZE_1G 0x000000f0 + + #define PORT_FEAT_CFG_DCBX_MASK 0x00000100 + #define PORT_FEAT_CFG_DCBX_DISABLED 0x00000000 + #define PORT_FEAT_CFG_DCBX_ENABLED 0x00000100 + + #define PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK 0x00000C00 + #define PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE 0x00000400 + #define PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI 0x00000800 + + #define PORT_FEATURE_EN_SIZE_MASK 0x0f000000 + #define PORT_FEATURE_EN_SIZE_SHIFT 24 + #define PORT_FEATURE_WOL_ENABLED 0x01000000 + #define PORT_FEATURE_MBA_ENABLED 0x02000000 + #define PORT_FEATURE_MFW_ENABLED 0x04000000 + + /* Advertise expansion ROM even if MBA is disabled */ + #define PORT_FEAT_CFG_FORCE_EXP_ROM_ADV_MASK 0x08000000 + #define PORT_FEAT_CFG_FORCE_EXP_ROM_ADV_DISABLED 0x00000000 + #define PORT_FEAT_CFG_FORCE_EXP_ROM_ADV_ENABLED 0x08000000 + + /* Check the optic vendor via i2c against a list of approved modules + in a separate nvram image */ + #define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK 0xe0000000 + #define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_SHIFT 29 + #define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT \ + 0x00000000 + #define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER \ + 0x20000000 + #define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG 0x40000000 + #define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN 0x60000000 + + u32 wol_config; + /* Default is used when driver sets to "auto" mode */ + #define PORT_FEATURE_WOL_DEFAULT_MASK 0x00000003 + #define PORT_FEATURE_WOL_DEFAULT_SHIFT 0 + #define PORT_FEATURE_WOL_DEFAULT_DISABLE 0x00000000 + #define PORT_FEATURE_WOL_DEFAULT_MAGIC 0x00000001 + #define PORT_FEATURE_WOL_DEFAULT_ACPI 0x00000002 + #define PORT_FEATURE_WOL_DEFAULT_MAGIC_AND_ACPI 0x00000003 + #define PORT_FEATURE_WOL_RES_PAUSE_CAP 0x00000004 + #define PORT_FEATURE_WOL_RES_ASYM_PAUSE_CAP 0x00000008 + #define PORT_FEATURE_WOL_ACPI_UPON_MGMT 0x00000010 + + u32 mba_config; + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK 0x00000007 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_SHIFT 0 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE 0x00000000 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_RPL 0x00000001 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_BOOTP 0x00000002 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB 0x00000003 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT 0x00000004 + #define PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE 0x00000007 + + #define PORT_FEATURE_MBA_BOOT_RETRY_MASK 0x00000038 + #define PORT_FEATURE_MBA_BOOT_RETRY_SHIFT 3 + + #define PORT_FEATURE_MBA_RES_PAUSE_CAP 0x00000100 + #define PORT_FEATURE_MBA_RES_ASYM_PAUSE_CAP 0x00000200 + #define PORT_FEATURE_MBA_SETUP_PROMPT_ENABLE 0x00000400 + #define PORT_FEATURE_MBA_HOTKEY_MASK 0x00000800 + #define PORT_FEATURE_MBA_HOTKEY_CTRL_S 0x00000000 + #define PORT_FEATURE_MBA_HOTKEY_CTRL_B 0x00000800 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_MASK 0x000ff000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_SHIFT 12 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_DISABLED 0x00000000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_2K 0x00001000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_4K 0x00002000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_8K 0x00003000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_16K 0x00004000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_32K 0x00005000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_64K 0x00006000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_128K 0x00007000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_256K 0x00008000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_512K 0x00009000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_1M 0x0000a000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_2M 0x0000b000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_4M 0x0000c000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_8M 0x0000d000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_16M 0x0000e000 + #define PORT_FEATURE_MBA_EXP_ROM_SIZE_32M 0x0000f000 + #define PORT_FEATURE_MBA_MSG_TIMEOUT_MASK 0x00f00000 + #define PORT_FEATURE_MBA_MSG_TIMEOUT_SHIFT 20 + #define PORT_FEATURE_MBA_BIOS_BOOTSTRAP_MASK 0x03000000 + #define PORT_FEATURE_MBA_BIOS_BOOTSTRAP_SHIFT 24 + #define PORT_FEATURE_MBA_BIOS_BOOTSTRAP_AUTO 0x00000000 + #define PORT_FEATURE_MBA_BIOS_BOOTSTRAP_BBS 0x01000000 + #define PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT18H 0x02000000 + #define PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT19H 0x03000000 + #define PORT_FEATURE_MBA_LINK_SPEED_MASK 0x3c000000 + #define PORT_FEATURE_MBA_LINK_SPEED_SHIFT 26 + #define PORT_FEATURE_MBA_LINK_SPEED_AUTO 0x00000000 + #define PORT_FEATURE_MBA_LINK_SPEED_10HD 0x04000000 + #define PORT_FEATURE_MBA_LINK_SPEED_10FD 0x08000000 + #define PORT_FEATURE_MBA_LINK_SPEED_100HD 0x0c000000 + #define PORT_FEATURE_MBA_LINK_SPEED_100FD 0x10000000 + #define PORT_FEATURE_MBA_LINK_SPEED_1GBPS 0x14000000 + #define PORT_FEATURE_MBA_LINK_SPEED_2_5GBPS 0x18000000 + #define PORT_FEATURE_MBA_LINK_SPEED_10GBPS_CX4 0x1c000000 + #define PORT_FEATURE_MBA_LINK_SPEED_20GBPS 0x20000000 + u32 bmc_config; + #define PORT_FEATURE_BMC_LINK_OVERRIDE_MASK 0x00000001 + #define PORT_FEATURE_BMC_LINK_OVERRIDE_DEFAULT 0x00000000 + #define PORT_FEATURE_BMC_LINK_OVERRIDE_EN 0x00000001 + + u32 mba_vlan_cfg; + #define PORT_FEATURE_MBA_VLAN_TAG_MASK 0x0000ffff + #define PORT_FEATURE_MBA_VLAN_TAG_SHIFT 0 + #define PORT_FEATURE_MBA_VLAN_EN 0x00010000 + + u32 resource_cfg; + #define PORT_FEATURE_RESOURCE_CFG_VALID 0x00000001 + #define PORT_FEATURE_RESOURCE_CFG_DIAG 0x00000002 + #define PORT_FEATURE_RESOURCE_CFG_L2 0x00000004 + #define PORT_FEATURE_RESOURCE_CFG_ISCSI 0x00000008 + #define PORT_FEATURE_RESOURCE_CFG_RDMA 0x00000010 + + u32 smbus_config; + #define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe + #define PORT_FEATURE_SMBUS_ADDR_SHIFT 1 + + u32 vf_config; + #define PORT_FEAT_CFG_VF_BAR2_SIZE_MASK 0x0000000f + #define PORT_FEAT_CFG_VF_BAR2_SIZE_SHIFT 0 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_DISABLED 0x00000000 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_4K 0x00000001 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_8K 0x00000002 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_16K 0x00000003 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_32K 0x00000004 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_64K 0x00000005 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_128K 0x00000006 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_256K 0x00000007 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_512K 0x00000008 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_1M 0x00000009 + #define PORT_FEAT_CFG_VF_BAR2_SIZE_2M 0x0000000a + #define PORT_FEAT_CFG_VF_BAR2_SIZE_4M 0x0000000b + #define PORT_FEAT_CFG_VF_BAR2_SIZE_8M 0x0000000c + #define PORT_FEAT_CFG_VF_BAR2_SIZE_16M 0x0000000d + #define PORT_FEAT_CFG_VF_BAR2_SIZE_32M 0x0000000e + #define PORT_FEAT_CFG_VF_BAR2_SIZE_64M 0x0000000f + + u32 link_config; /* Used as HW defaults for the driver */ + #define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000 + #define PORT_FEATURE_CONNECTED_SWITCH_SHIFT 24 + /* (forced) low speed switch (< 10G) */ + #define PORT_FEATURE_CON_SWITCH_1G_SWITCH 0x00000000 + /* (forced) high speed switch (>= 10G) */ + #define PORT_FEATURE_CON_SWITCH_10G_SWITCH 0x01000000 + #define PORT_FEATURE_CON_SWITCH_AUTO_DETECT 0x02000000 + #define PORT_FEATURE_CON_SWITCH_ONE_TIME_DETECT 0x03000000 + + #define PORT_FEATURE_LINK_SPEED_MASK 0x000f0000 + #define PORT_FEATURE_LINK_SPEED_SHIFT 16 + #define PORT_FEATURE_LINK_SPEED_AUTO 0x00000000 + #define PORT_FEATURE_LINK_SPEED_10M_FULL 0x00010000 + #define PORT_FEATURE_LINK_SPEED_10M_HALF 0x00020000 + #define PORT_FEATURE_LINK_SPEED_100M_HALF 0x00030000 + #define PORT_FEATURE_LINK_SPEED_100M_FULL 0x00040000 + #define PORT_FEATURE_LINK_SPEED_1G 0x00050000 + #define PORT_FEATURE_LINK_SPEED_2_5G 0x00060000 + #define PORT_FEATURE_LINK_SPEED_10G_CX4 0x00070000 + #define PORT_FEATURE_LINK_SPEED_20G 0x00080000 + + #define PORT_FEATURE_FLOW_CONTROL_MASK 0x00000700 + #define PORT_FEATURE_FLOW_CONTROL_SHIFT 8 + #define PORT_FEATURE_FLOW_CONTROL_AUTO 0x00000000 + #define PORT_FEATURE_FLOW_CONTROL_TX 0x00000100 + #define PORT_FEATURE_FLOW_CONTROL_RX 0x00000200 + #define PORT_FEATURE_FLOW_CONTROL_BOTH 0x00000300 + #define PORT_FEATURE_FLOW_CONTROL_NONE 0x00000400 + + /* The default for MCP link configuration, + uses the same defines as link_config */ + u32 mfw_wol_link_cfg; + + /* The default for the driver of the second external phy, + uses the same defines as link_config */ + u32 link_config2; /* 0x47C */ + + /* The default for MCP of the second external phy, + uses the same defines as link_config */ + u32 mfw_wol_link_cfg2; /* 0x480 */ + + + /* EEE power saving mode */ + u32 eee_power_mode; /* 0x484 */ + #define PORT_FEAT_CFG_EEE_POWER_MODE_MASK 0x000000FF + #define PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT 0 + #define PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED 0x00000000 + #define PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED 0x00000001 + #define PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE 0x00000002 + #define PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY 0x00000003 + + + u32 Reserved2[16]; /* 0x488 */ +}; + + +/**************************************************************************** + * Device Information * + ****************************************************************************/ +struct shm_dev_info { /* size */ + + u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + + struct shared_hw_cfg shared_hw_config; /* 40 */ + + struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */ + + struct shared_feat_cfg shared_feature_config; /* 4 */ + + struct port_feat_cfg port_feature_config[PORT_MAX];/* 116*2=232 */ + +}; + + +#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN) + #error "Missing either LITTLE_ENDIAN or BIG_ENDIAN definition." +#endif + +#define FUNC_0 0 +#define FUNC_1 1 +#define FUNC_2 2 +#define FUNC_3 3 +#define FUNC_4 4 +#define FUNC_5 5 +#define FUNC_6 6 +#define FUNC_7 7 +#define E1_FUNC_MAX 2 +#define E1H_FUNC_MAX 8 +#define E2_FUNC_MAX 4 /* per path */ + +#define VN_0 0 +#define VN_1 1 +#define VN_2 2 +#define VN_3 3 +#define E1VN_MAX 1 +#define E1HVN_MAX 4 + +#define E2_VF_MAX 64 /* HC_REG_VF_CONFIGURATION_SIZE */ +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 5000 + +#define FW_ACK_POLL_TIME_MS 1 + +#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) + +#define MFW_TRACE_SIGNATURE 0x54524342 + +/**************************************************************************** + * Driver <-> FW Mailbox * + ****************************************************************************/ +struct drv_port_mb { + + u32 link_status; + /* Driver should update this field on any link change event */ + + #define LINK_STATUS_NONE (0<<0) + #define LINK_STATUS_LINK_FLAG_MASK 0x00000001 + #define LINK_STATUS_LINK_UP 0x00000001 + #define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E + #define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_20GTFD (11<<1) + #define LINK_STATUS_SPEED_AND_DUPLEX_20GXFD (11<<1) + + #define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 + #define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 + + #define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 + #define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 + #define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 + + #define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 + #define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 + #define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 + #define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 + #define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 + #define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 + #define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 + + #define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 + #define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 + + #define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 + #define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 + + #define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 + #define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) + #define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) + #define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) + #define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) + + #define LINK_STATUS_SERDES_LINK 0x00100000 + + #define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 + #define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 + #define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 + #define LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE 0x10000000 + + #define LINK_STATUS_PFC_ENABLED 0x20000000 + + #define LINK_STATUS_PHYSICAL_LINK_FLAG 0x40000000 + #define LINK_STATUS_SFP_TX_FAULT 0x80000000 + + u32 port_stx; + + u32 stat_nig_timer; + + /* MCP firmware does not use this field */ + u32 ext_phy_fw_version; + +}; + + +struct drv_func_mb { + + u32 drv_mb_header; + #define DRV_MSG_CODE_MASK 0xffff0000 + #define DRV_MSG_CODE_LOAD_REQ 0x10000000 + #define DRV_MSG_CODE_LOAD_DONE 0x11000000 + #define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 + #define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 + #define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 + #define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 + #define DRV_MSG_CODE_DCC_OK 0x30000000 + #define DRV_MSG_CODE_DCC_FAILURE 0x31000000 + #define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 + #define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 + #define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 + #define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 + #define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 + #define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 + #define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + #define DRV_MSG_CODE_OEM_OK 0x00010000 + #define DRV_MSG_CODE_OEM_FAILURE 0x00020000 + #define DRV_MSG_CODE_OEM_UPDATE_SVID_OK 0x00030000 + #define DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE 0x00040000 + /* + * The optic module verification command requires bootcode + * v5.0.6 or later, te specific optic module verification command + * requires bootcode v5.2.12 or later + */ + #define DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL 0xa0000000 + #define REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL 0x00050006 + #define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL 0xa1000000 + #define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL 0x00050234 + #define DRV_MSG_CODE_VRFY_AFEX_SUPPORTED 0xa2000000 + #define REQ_BC_VER_4_VRFY_AFEX_SUPPORTED 0x00070002 + #define REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED 0x00070014 + #define REQ_BC_VER_4_MT_SUPPORTED 0x00070201 + #define REQ_BC_VER_4_PFC_STATS_SUPPORTED 0x00070201 + #define REQ_BC_VER_4_FCOE_FEATURES 0x00070209 + + #define DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG 0xb0000000 + #define DRV_MSG_CODE_DCBX_PMF_DRV_OK 0xb2000000 + #define REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF 0x00070401 + + #define DRV_MSG_CODE_VF_DISABLED_DONE 0xc0000000 + + #define DRV_MSG_CODE_AFEX_DRIVER_SETMAC 0xd0000000 + #define DRV_MSG_CODE_AFEX_LISTGET_ACK 0xd1000000 + #define DRV_MSG_CODE_AFEX_LISTSET_ACK 0xd2000000 + #define DRV_MSG_CODE_AFEX_STATSGET_ACK 0xd3000000 + #define DRV_MSG_CODE_AFEX_VIFSET_ACK 0xd4000000 + + #define DRV_MSG_CODE_DRV_INFO_ACK 0xd8000000 + #define DRV_MSG_CODE_DRV_INFO_NACK 0xd9000000 + + #define DRV_MSG_CODE_EEE_RESULTS_ACK 0xda000000 + + #define DRV_MSG_CODE_RMMOD 0xdb000000 + #define REQ_BC_VER_4_RMMOD_CMD 0x0007080f + + #define DRV_MSG_CODE_SET_MF_BW 0xe0000000 + #define REQ_BC_VER_4_SET_MF_BW 0x00060202 + #define DRV_MSG_CODE_SET_MF_BW_ACK 0xe1000000 + + #define DRV_MSG_CODE_LINK_STATUS_CHANGED 0x01000000 + + #define DRV_MSG_CODE_INITIATE_FLR 0x02000000 + #define REQ_BC_VER_4_INITIATE_FLR 0x00070213 + + #define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000 + #define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000 + #define BIOS_MSG_CODE_VIRT_MAC_PRIM 0xff030000 + #define BIOS_MSG_CODE_VIRT_MAC_ISCSI 0xff040000 + + #define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 drv_mb_param; + #define DRV_MSG_CODE_SET_MF_BW_MIN_MASK 0x00ff0000 + #define DRV_MSG_CODE_SET_MF_BW_MAX_MASK 0xff000000 + + #define DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET 0x00000002 + + #define DRV_MSG_CODE_LOAD_REQ_WITH_LFA 0x0000100a + #define DRV_MSG_CODE_LOAD_REQ_FORCE_LFA 0x00002000 + + u32 fw_mb_header; + #define FW_MSG_CODE_MASK 0xffff0000 + #define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000 + #define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000 + #define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000 + /* Load common chip is supported from bc 6.0.0 */ + #define REQ_BC_VER_4_DRV_LOAD_COMMON_CHIP 0x00060000 + #define FW_MSG_CODE_DRV_LOAD_COMMON_CHIP 0x10130000 + + #define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000 + #define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000 + #define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000 + #define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000 + #define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000 + #define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000 + #define FW_MSG_CODE_DCC_DONE 0x30100000 + #define FW_MSG_CODE_LLDP_DONE 0x40100000 + #define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000 + #define FW_MSG_CODE_DIAG_REFUSE 0x50200000 + #define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000 + #define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000 + #define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000 + #define FW_MSG_CODE_GET_KEY_DONE 0x80100000 + #define FW_MSG_CODE_NO_KEY 0x80f00000 + #define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000 + #define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000 + #define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000 + #define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 + #define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 + #define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 + #define FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS 0xa0100000 + #define FW_MSG_CODE_VRFY_OPT_MDL_INVLD_IMG 0xa0200000 + #define FW_MSG_CODE_VRFY_OPT_MDL_UNAPPROVED 0xa0300000 + #define FW_MSG_CODE_VF_DISABLED_DONE 0xb0000000 + #define FW_MSG_CODE_HW_SET_INVALID_IMAGE 0xb0100000 + + #define FW_MSG_CODE_AFEX_DRIVER_SETMAC_DONE 0xd0100000 + #define FW_MSG_CODE_AFEX_LISTGET_ACK 0xd1100000 + #define FW_MSG_CODE_AFEX_LISTSET_ACK 0xd2100000 + #define FW_MSG_CODE_AFEX_STATSGET_ACK 0xd3100000 + #define FW_MSG_CODE_AFEX_VIFSET_ACK 0xd4100000 + + #define FW_MSG_CODE_DRV_INFO_ACK 0xd8100000 + #define FW_MSG_CODE_DRV_INFO_NACK 0xd9100000 + + #define FW_MSG_CODE_EEE_RESULS_ACK 0xda100000 + + #define FW_MSG_CODE_RMMOD_ACK 0xdb100000 + + #define FW_MSG_CODE_SET_MF_BW_SENT 0xe0000000 + #define FW_MSG_CODE_SET_MF_BW_DONE 0xe1000000 + + #define FW_MSG_CODE_LINK_CHANGED_ACK 0x01100000 + + #define FW_MSG_CODE_LIC_CHALLENGE 0xff010000 + #define FW_MSG_CODE_LIC_RESPONSE 0xff020000 + #define FW_MSG_CODE_VIRT_MAC_PRIM 0xff030000 + #define FW_MSG_CODE_VIRT_MAC_ISCSI 0xff040000 + + #define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 fw_mb_param; + + u32 drv_pulse_mb; + #define DRV_PULSE_SEQ_MASK 0x00007fff + #define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 + /* + * The system time is in the format of + * (year-2001)*12*32 + month*32 + day. + */ + #define DRV_PULSE_ALWAYS_ALIVE 0x00008000 + /* + * Indicate to the firmware not to go into the + * OS-absent when it is not getting driver pulse. + * This is used for debugging as well for PXE(MBA). + */ + + u32 mcp_pulse_mb; + #define MCP_PULSE_SEQ_MASK 0x00007fff + #define MCP_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicates to the driver not to assert due to lack + * of MCP response */ + #define MCP_EVENT_MASK 0xffff0000 + #define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 + + u32 iscsi_boot_signature; + u32 iscsi_boot_block_offset; + + u32 drv_status; + #define DRV_STATUS_PMF 0x00000001 + #define DRV_STATUS_VF_DISABLED 0x00000002 + #define DRV_STATUS_SET_MF_BW 0x00000004 + #define DRV_STATUS_LINK_EVENT 0x00000008 + + #define DRV_STATUS_OEM_EVENT_MASK 0x00000070 + #define DRV_STATUS_OEM_DISABLE_ENABLE_PF 0x00000010 + #define DRV_STATUS_OEM_BANDWIDTH_ALLOCATION 0x00000020 + + #define DRV_STATUS_OEM_UPDATE_SVID 0x00000080 + + #define DRV_STATUS_DCC_EVENT_MASK 0x0000ff00 + #define DRV_STATUS_DCC_DISABLE_ENABLE_PF 0x00000100 + #define DRV_STATUS_DCC_BANDWIDTH_ALLOCATION 0x00000200 + #define DRV_STATUS_DCC_CHANGE_MAC_ADDRESS 0x00000400 + #define DRV_STATUS_DCC_RESERVED1 0x00000800 + #define DRV_STATUS_DCC_SET_PROTOCOL 0x00001000 + #define DRV_STATUS_DCC_SET_PRIORITY 0x00002000 + + #define DRV_STATUS_DCBX_EVENT_MASK 0x000f0000 + #define DRV_STATUS_DCBX_NEGOTIATION_RESULTS 0x00010000 + #define DRV_STATUS_AFEX_EVENT_MASK 0x03f00000 + #define DRV_STATUS_AFEX_LISTGET_REQ 0x00100000 + #define DRV_STATUS_AFEX_LISTSET_REQ 0x00200000 + #define DRV_STATUS_AFEX_STATSGET_REQ 0x00400000 + #define DRV_STATUS_AFEX_VIFSET_REQ 0x00800000 + + #define DRV_STATUS_DRV_INFO_REQ 0x04000000 + + #define DRV_STATUS_EEE_NEGOTIATION_RESULTS 0x08000000 + + u32 virt_mac_upper; + #define VIRT_MAC_SIGN_MASK 0xffff0000 + #define VIRT_MAC_SIGNATURE 0x564d0000 + u32 virt_mac_lower; + +}; + + +/**************************************************************************** + * Management firmware state * + ****************************************************************************/ +/* Allocate 440 bytes for management firmware */ +#define MGMTFW_STATE_WORD_SIZE 110 + +struct mgmtfw_state { + u32 opaque[MGMTFW_STATE_WORD_SIZE]; +}; + + +/**************************************************************************** + * Multi-Function configuration * + ****************************************************************************/ +struct shared_mf_cfg { + + u32 clp_mb; + #define SHARED_MF_CLP_SET_DEFAULT 0x00000000 + /* set by CLP */ + #define SHARED_MF_CLP_EXIT 0x00000001 + /* set by MCP */ + #define SHARED_MF_CLP_EXIT_DONE 0x00010000 + +}; + +struct port_mf_cfg { + + u32 dynamic_cfg; /* device control channel */ + #define PORT_MF_CFG_E1HOV_TAG_MASK 0x0000ffff + #define PORT_MF_CFG_E1HOV_TAG_SHIFT 0 + #define PORT_MF_CFG_E1HOV_TAG_DEFAULT PORT_MF_CFG_E1HOV_TAG_MASK + + u32 reserved[1]; + +}; + +struct func_mf_cfg { + + u32 config; + /* E/R/I/D */ + /* function 0 of each port cannot be hidden */ + #define FUNC_MF_CFG_FUNC_HIDE 0x00000001 + + #define FUNC_MF_CFG_PROTOCOL_MASK 0x00000006 + #define FUNC_MF_CFG_PROTOCOL_FCOE 0x00000000 + #define FUNC_MF_CFG_PROTOCOL_ETHERNET 0x00000002 + #define FUNC_MF_CFG_PROTOCOL_ETHERNET_WITH_RDMA 0x00000004 + #define FUNC_MF_CFG_PROTOCOL_ISCSI 0x00000006 + #define FUNC_MF_CFG_PROTOCOL_DEFAULT \ + FUNC_MF_CFG_PROTOCOL_ETHERNET_WITH_RDMA + + #define FUNC_MF_CFG_FUNC_DISABLED 0x00000008 + #define FUNC_MF_CFG_FUNC_DELETED 0x00000010 + + /* PRI */ + /* 0 - low priority, 3 - high priority */ + #define FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK 0x00000300 + #define FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT 8 + #define FUNC_MF_CFG_TRANSMIT_PRIORITY_DEFAULT 0x00000000 + + /* MINBW, MAXBW */ + /* value range - 0..100, increments in 100Mbps */ + #define FUNC_MF_CFG_MIN_BW_MASK 0x00ff0000 + #define FUNC_MF_CFG_MIN_BW_SHIFT 16 + #define FUNC_MF_CFG_MIN_BW_DEFAULT 0x00000000 + #define FUNC_MF_CFG_MAX_BW_MASK 0xff000000 + #define FUNC_MF_CFG_MAX_BW_SHIFT 24 + #define FUNC_MF_CFG_MAX_BW_DEFAULT 0x64000000 + + u32 mac_upper; /* MAC */ + #define FUNC_MF_CFG_UPPERMAC_MASK 0x0000ffff + #define FUNC_MF_CFG_UPPERMAC_SHIFT 0 + #define FUNC_MF_CFG_UPPERMAC_DEFAULT FUNC_MF_CFG_UPPERMAC_MASK + u32 mac_lower; + #define FUNC_MF_CFG_LOWERMAC_DEFAULT 0xffffffff + + u32 e1hov_tag; /* VNI */ + #define FUNC_MF_CFG_E1HOV_TAG_MASK 0x0000ffff + #define FUNC_MF_CFG_E1HOV_TAG_SHIFT 0 + #define FUNC_MF_CFG_E1HOV_TAG_DEFAULT FUNC_MF_CFG_E1HOV_TAG_MASK + + /* afex default VLAN ID - 12 bits */ + #define FUNC_MF_CFG_AFEX_VLAN_MASK 0x0fff0000 + #define FUNC_MF_CFG_AFEX_VLAN_SHIFT 16 + + u32 afex_config; + #define FUNC_MF_CFG_AFEX_COS_FILTER_MASK 0x000000ff + #define FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT 0 + #define FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK 0x0000ff00 + #define FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT 8 + #define FUNC_MF_CFG_AFEX_MBA_ENABLED_VAL 0x00000100 + #define FUNC_MF_CFG_AFEX_VLAN_MODE_MASK 0x000f0000 + #define FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT 16 + + u32 reserved; +}; + +enum mf_cfg_afex_vlan_mode { + FUNC_MF_CFG_AFEX_VLAN_TRUNK_MODE = 0, + FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE, + FUNC_MF_CFG_AFEX_VLAN_TRUNK_TAG_NATIVE_MODE +}; + +/* This structure is not applicable and should not be accessed on 57711 */ +struct func_ext_cfg { + u32 func_cfg; + #define MACP_FUNC_CFG_FLAGS_MASK 0x0000007F + #define MACP_FUNC_CFG_FLAGS_SHIFT 0 + #define MACP_FUNC_CFG_FLAGS_ENABLED 0x00000001 + #define MACP_FUNC_CFG_FLAGS_ETHERNET 0x00000002 + #define MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD 0x00000004 + #define MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD 0x00000008 + #define MACP_FUNC_CFG_PAUSE_ON_HOST_RING 0x00000080 + + u32 iscsi_mac_addr_upper; + u32 iscsi_mac_addr_lower; + + u32 fcoe_mac_addr_upper; + u32 fcoe_mac_addr_lower; + + u32 fcoe_wwn_port_name_upper; + u32 fcoe_wwn_port_name_lower; + + u32 fcoe_wwn_node_name_upper; + u32 fcoe_wwn_node_name_lower; + + u32 preserve_data; + #define MF_FUNC_CFG_PRESERVE_L2_MAC (1<<0) + #define MF_FUNC_CFG_PRESERVE_ISCSI_MAC (1<<1) + #define MF_FUNC_CFG_PRESERVE_FCOE_MAC (1<<2) + #define MF_FUNC_CFG_PRESERVE_FCOE_WWN_P (1<<3) + #define MF_FUNC_CFG_PRESERVE_FCOE_WWN_N (1<<4) + #define MF_FUNC_CFG_PRESERVE_TX_BW (1<<5) +}; + +struct mf_cfg { + + struct shared_mf_cfg shared_mf_config; /* 0x4 */ + /* 0x8*2*2=0x20 */ + struct port_mf_cfg port_mf_config[NVM_PATH_MAX][PORT_MAX]; + /* for all chips, there are 8 mf functions */ + struct func_mf_cfg func_mf_config[E1H_FUNC_MAX]; /* 0x18 * 8 = 0xc0 */ + /* + * Extended configuration per function - this array does not exist and + * should not be accessed on 57711 + */ + struct func_ext_cfg func_ext_config[E1H_FUNC_MAX]; /* 0x28 * 8 = 0x140*/ +}; /* 0x224 */ + +/**************************************************************************** + * Shared Memory Region * + ****************************************************************************/ +struct shmem_region { /* SharedMem Offset (size) */ + + u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */ + #define SHR_MEM_FORMAT_REV_MASK 0xff000000 + #define SHR_MEM_FORMAT_REV_ID ('A'<<24) + /* validity bits */ + #define SHR_MEM_VALIDITY_PCI_CFG 0x00100000 + #define SHR_MEM_VALIDITY_MB 0x00200000 + #define SHR_MEM_VALIDITY_DEV_INFO 0x00400000 + #define SHR_MEM_VALIDITY_RESERVED 0x00000007 + /* One licensing bit should be set */ + #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038 + #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008 + #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010 + #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020 + /* Active MFW */ + #define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000 + #define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0 + #define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040 + #define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080 + #define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0 + #define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0 + + struct shm_dev_info dev_info; /* 0x8 (0x438) */ + + struct license_key drv_lic_key[PORT_MAX]; /* 0x440 (52*2=0x68) */ + + /* FW information (for internal FW use) */ + u32 fw_info_fio_offset; /* 0x4a8 (0x4) */ + struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */ + + struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */ + +#ifdef BMAPI + /* This is a variable length array */ + /* the number of function depends on the chip type */ + struct drv_func_mb func_mb[1]; /* 0x684 (44*2/4/8=0x58/0xb0/0x160) */ +#else + /* the number of function depends on the chip type */ + struct drv_func_mb func_mb[]; /* 0x684 (44*2/4/8=0x58/0xb0/0x160) */ +#endif /* BMAPI */ + +}; /* 57710 = 0x6dc | 57711 = 0x7E4 | 57712 = 0x734 */ + +/**************************************************************************** + * Shared Memory 2 Region * + ****************************************************************************/ +/* The fw_flr_ack is actually built in the following way: */ +/* 8 bit: PF ack */ +/* 64 bit: VF ack */ +/* 8 bit: ios_dis_ack */ +/* In order to maintain endianity in the mailbox hsi, we want to keep using */ +/* u32. The fw must have the VF right after the PF since this is how it */ +/* access arrays(it expects always the VF to reside after the PF, and that */ +/* makes the calculation much easier for it. ) */ +/* In order to answer both limitations, and keep the struct small, the code */ +/* will abuse the structure defined here to achieve the actual partition */ +/* above */ +/****************************************************************************/ +struct fw_flr_ack { + u32 pf_ack; + u32 vf_ack[1]; + u32 iov_dis_ack; +}; + +struct fw_flr_mb { + u32 aggint; + u32 opgen_addr; + struct fw_flr_ack ack; +}; + +struct eee_remote_vals { + u32 tx_tw; + u32 rx_tw; +}; + +/**** SUPPORT FOR SHMEM ARRRAYS *** + * The SHMEM HSI is aligned on 32 bit boundaries which makes it difficult to + * define arrays with storage types smaller then unsigned dwords. + * The macros below add generic support for SHMEM arrays with numeric elements + * that can span 2,4,8 or 16 bits. The array underlying type is a 32 bit dword + * array with individual bit-filed elements accessed using shifts and masks. + * + */ + +/* eb is the bitwidth of a single element */ +#define SHMEM_ARRAY_MASK(eb) ((1<<(eb))-1) +#define SHMEM_ARRAY_ENTRY(i, eb) ((i)/(32/(eb))) + +/* the bit-position macro allows the used to flip the order of the arrays + * elements on a per byte or word boundary. + * + * example: an array with 8 entries each 4 bit wide. This array will fit into + * a single dword. The diagrmas below show the array order of the nibbles. + * + * SHMEM_ARRAY_BITPOS(i, 4, 4) defines the stadard ordering: + * + * | | | | + * 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | | | | + * + * SHMEM_ARRAY_BITPOS(i, 4, 8) defines a flip ordering per byte: + * + * | | | | + * 1 | 0 | 3 | 2 | 5 | 4 | 7 | 6 | + * | | | | + * + * SHMEM_ARRAY_BITPOS(i, 4, 16) defines a flip ordering per word: + * + * | | | | + * 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | + * | | | | + */ +#define SHMEM_ARRAY_BITPOS(i, eb, fb) \ + ((((32/(fb)) - 1 - ((i)/((fb)/(eb))) % (32/(fb))) * (fb)) + \ + (((i)%((fb)/(eb))) * (eb))) + +#define SHMEM_ARRAY_GET(a, i, eb, fb) \ + ((a[SHMEM_ARRAY_ENTRY(i, eb)] >> SHMEM_ARRAY_BITPOS(i, eb, fb)) & \ + SHMEM_ARRAY_MASK(eb)) + +#define SHMEM_ARRAY_SET(a, i, eb, fb, val) \ +do { \ + a[SHMEM_ARRAY_ENTRY(i, eb)] &= ~(SHMEM_ARRAY_MASK(eb) << \ + SHMEM_ARRAY_BITPOS(i, eb, fb)); \ + a[SHMEM_ARRAY_ENTRY(i, eb)] |= (((val) & SHMEM_ARRAY_MASK(eb)) << \ + SHMEM_ARRAY_BITPOS(i, eb, fb)); \ +} while (0) + + +/****START OF DCBX STRUCTURES DECLARATIONS****/ +#define DCBX_MAX_NUM_PRI_PG_ENTRIES 8 +#define DCBX_PRI_PG_BITWIDTH 4 +#define DCBX_PRI_PG_FBITS 8 +#define DCBX_PRI_PG_GET(a, i) \ + SHMEM_ARRAY_GET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS) +#define DCBX_PRI_PG_SET(a, i, val) \ + SHMEM_ARRAY_SET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS, val) +#define DCBX_MAX_NUM_PG_BW_ENTRIES 8 +#define DCBX_BW_PG_BITWIDTH 8 +#define DCBX_PG_BW_GET(a, i) \ + SHMEM_ARRAY_GET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH) +#define DCBX_PG_BW_SET(a, i, val) \ + SHMEM_ARRAY_SET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH, val) +#define DCBX_STRICT_PRI_PG 15 +#define DCBX_MAX_APP_PROTOCOL 16 +#define FCOE_APP_IDX 0 +#define ISCSI_APP_IDX 1 +#define PREDEFINED_APP_IDX_MAX 2 + + +/* Big/Little endian have the same representation. */ +struct dcbx_ets_feature { + /* + * For Admin MIB - is this feature supported by the + * driver | For Local MIB - should this feature be enabled. + */ + u32 enabled; + u32 pg_bw_tbl[2]; + u32 pri_pg_tbl[1]; +}; + +/* Driver structure in LE */ +struct dcbx_pfc_feature { +#ifdef __BIG_ENDIAN + u8 pri_en_bitmap; + #define DCBX_PFC_PRI_0 0x01 + #define DCBX_PFC_PRI_1 0x02 + #define DCBX_PFC_PRI_2 0x04 + #define DCBX_PFC_PRI_3 0x08 + #define DCBX_PFC_PRI_4 0x10 + #define DCBX_PFC_PRI_5 0x20 + #define DCBX_PFC_PRI_6 0x40 + #define DCBX_PFC_PRI_7 0x80 + u8 pfc_caps; + u8 reserved; + u8 enabled; +#elif defined(__LITTLE_ENDIAN) + u8 enabled; + u8 reserved; + u8 pfc_caps; + u8 pri_en_bitmap; + #define DCBX_PFC_PRI_0 0x01 + #define DCBX_PFC_PRI_1 0x02 + #define DCBX_PFC_PRI_2 0x04 + #define DCBX_PFC_PRI_3 0x08 + #define DCBX_PFC_PRI_4 0x10 + #define DCBX_PFC_PRI_5 0x20 + #define DCBX_PFC_PRI_6 0x40 + #define DCBX_PFC_PRI_7 0x80 +#endif +}; + +struct dcbx_app_priority_entry { +#ifdef __BIG_ENDIAN + u16 app_id; + u8 pri_bitmap; + u8 appBitfield; + #define DCBX_APP_ENTRY_VALID 0x01 + #define DCBX_APP_ENTRY_SF_MASK 0xF0 + #define DCBX_APP_ENTRY_SF_SHIFT 4 + #define DCBX_APP_SF_ETH_TYPE 0x10 + #define DCBX_APP_SF_PORT 0x20 + #define DCBX_APP_SF_UDP 0x40 + #define DCBX_APP_SF_DEFAULT 0x80 +#elif defined(__LITTLE_ENDIAN) + u8 appBitfield; + #define DCBX_APP_ENTRY_VALID 0x01 + #define DCBX_APP_ENTRY_SF_MASK 0xF0 + #define DCBX_APP_ENTRY_SF_SHIFT 4 + #define DCBX_APP_ENTRY_VALID 0x01 + #define DCBX_APP_SF_ETH_TYPE 0x10 + #define DCBX_APP_SF_PORT 0x20 + #define DCBX_APP_SF_UDP 0x40 + #define DCBX_APP_SF_DEFAULT 0x80 + u8 pri_bitmap; + u16 app_id; +#endif +}; + + +/* FW structure in BE */ +struct dcbx_app_priority_feature { +#ifdef __BIG_ENDIAN + u8 reserved; + u8 default_pri; + u8 tc_supported; + u8 enabled; +#elif defined(__LITTLE_ENDIAN) + u8 enabled; + u8 tc_supported; + u8 default_pri; + u8 reserved; +#endif + struct dcbx_app_priority_entry app_pri_tbl[DCBX_MAX_APP_PROTOCOL]; +}; + +/* FW structure in BE */ +struct dcbx_features { + /* PG feature */ + struct dcbx_ets_feature ets; + /* PFC feature */ + struct dcbx_pfc_feature pfc; + /* APP feature */ + struct dcbx_app_priority_feature app; +}; + +/* LLDP protocol parameters */ +/* FW structure in BE */ +struct lldp_params { +#ifdef __BIG_ENDIAN + u8 msg_fast_tx_interval; + u8 msg_tx_hold; + u8 msg_tx_interval; + u8 admin_status; + #define LLDP_TX_ONLY 0x01 + #define LLDP_RX_ONLY 0x02 + #define LLDP_TX_RX 0x03 + #define LLDP_DISABLED 0x04 + u8 reserved1; + u8 tx_fast; + u8 tx_crd_max; + u8 tx_crd; +#elif defined(__LITTLE_ENDIAN) + u8 admin_status; + #define LLDP_TX_ONLY 0x01 + #define LLDP_RX_ONLY 0x02 + #define LLDP_TX_RX 0x03 + #define LLDP_DISABLED 0x04 + u8 msg_tx_interval; + u8 msg_tx_hold; + u8 msg_fast_tx_interval; + u8 tx_crd; + u8 tx_crd_max; + u8 tx_fast; + u8 reserved1; +#endif + #define REM_CHASSIS_ID_STAT_LEN 4 + #define REM_PORT_ID_STAT_LEN 4 + /* Holds remote Chassis ID TLV header, subtype and 9B of payload. */ + u32 peer_chassis_id[REM_CHASSIS_ID_STAT_LEN]; + /* Holds remote Port ID TLV header, subtype and 9B of payload. */ + u32 peer_port_id[REM_PORT_ID_STAT_LEN]; +}; + +struct lldp_dcbx_stat { + #define LOCAL_CHASSIS_ID_STAT_LEN 2 + #define LOCAL_PORT_ID_STAT_LEN 2 + /* Holds local Chassis ID 8B payload of constant subtype 4. */ + u32 local_chassis_id[LOCAL_CHASSIS_ID_STAT_LEN]; + /* Holds local Port ID 8B payload of constant subtype 3. */ + u32 local_port_id[LOCAL_PORT_ID_STAT_LEN]; + /* Number of DCBX frames transmitted. */ + u32 num_tx_dcbx_pkts; + /* Number of DCBX frames received. */ + u32 num_rx_dcbx_pkts; +}; + +/* ADMIN MIB - DCBX local machine default configuration. */ +struct lldp_admin_mib { + u32 ver_cfg_flags; + #define DCBX_ETS_CONFIG_TX_ENABLED 0x00000001 + #define DCBX_PFC_CONFIG_TX_ENABLED 0x00000002 + #define DCBX_APP_CONFIG_TX_ENABLED 0x00000004 + #define DCBX_ETS_RECO_TX_ENABLED 0x00000008 + #define DCBX_ETS_RECO_VALID 0x00000010 + #define DCBX_ETS_WILLING 0x00000020 + #define DCBX_PFC_WILLING 0x00000040 + #define DCBX_APP_WILLING 0x00000080 + #define DCBX_VERSION_CEE 0x00000100 + #define DCBX_VERSION_IEEE 0x00000200 + #define DCBX_DCBX_ENABLED 0x00000400 + #define DCBX_CEE_VERSION_MASK 0x0000f000 + #define DCBX_CEE_VERSION_SHIFT 12 + #define DCBX_CEE_MAX_VERSION_MASK 0x000f0000 + #define DCBX_CEE_MAX_VERSION_SHIFT 16 + struct dcbx_features features; +}; + +/* REMOTE MIB - remote machine DCBX configuration. */ +struct lldp_remote_mib { + u32 prefix_seq_num; + u32 flags; + #define DCBX_ETS_TLV_RX 0x00000001 + #define DCBX_PFC_TLV_RX 0x00000002 + #define DCBX_APP_TLV_RX 0x00000004 + #define DCBX_ETS_RX_ERROR 0x00000010 + #define DCBX_PFC_RX_ERROR 0x00000020 + #define DCBX_APP_RX_ERROR 0x00000040 + #define DCBX_ETS_REM_WILLING 0x00000100 + #define DCBX_PFC_REM_WILLING 0x00000200 + #define DCBX_APP_REM_WILLING 0x00000400 + #define DCBX_REMOTE_ETS_RECO_VALID 0x00001000 + #define DCBX_REMOTE_MIB_VALID 0x00002000 + struct dcbx_features features; + u32 suffix_seq_num; +}; + +/* LOCAL MIB - operational DCBX configuration - transmitted on Tx LLDPDU. */ +struct lldp_local_mib { + u32 prefix_seq_num; + /* Indicates if there is mismatch with negotiation results. */ + u32 error; + #define DCBX_LOCAL_ETS_ERROR 0x00000001 + #define DCBX_LOCAL_PFC_ERROR 0x00000002 + #define DCBX_LOCAL_APP_ERROR 0x00000004 + #define DCBX_LOCAL_PFC_MISMATCH 0x00000010 + #define DCBX_LOCAL_APP_MISMATCH 0x00000020 + #define DCBX_REMOTE_MIB_ERROR 0x00000040 + #define DCBX_REMOTE_ETS_TLV_NOT_FOUND 0x00000080 + #define DCBX_REMOTE_PFC_TLV_NOT_FOUND 0x00000100 + #define DCBX_REMOTE_APP_TLV_NOT_FOUND 0x00000200 + struct dcbx_features features; + u32 suffix_seq_num; +}; +/***END OF DCBX STRUCTURES DECLARATIONS***/ + +/***********************************************************/ +/* Elink section */ +/***********************************************************/ +#define SHMEM_LINK_CONFIG_SIZE 2 +struct shmem_lfa { + u32 req_duplex; + #define REQ_DUPLEX_PHY0_MASK 0x0000ffff + #define REQ_DUPLEX_PHY0_SHIFT 0 + #define REQ_DUPLEX_PHY1_MASK 0xffff0000 + #define REQ_DUPLEX_PHY1_SHIFT 16 + u32 req_flow_ctrl; + #define REQ_FLOW_CTRL_PHY0_MASK 0x0000ffff + #define REQ_FLOW_CTRL_PHY0_SHIFT 0 + #define REQ_FLOW_CTRL_PHY1_MASK 0xffff0000 + #define REQ_FLOW_CTRL_PHY1_SHIFT 16 + u32 req_line_speed; /* Also determine AutoNeg */ + #define REQ_LINE_SPD_PHY0_MASK 0x0000ffff + #define REQ_LINE_SPD_PHY0_SHIFT 0 + #define REQ_LINE_SPD_PHY1_MASK 0xffff0000 + #define REQ_LINE_SPD_PHY1_SHIFT 16 + u32 speed_cap_mask[SHMEM_LINK_CONFIG_SIZE]; + u32 additional_config; + #define REQ_FC_AUTO_ADV_MASK 0x0000ffff + #define REQ_FC_AUTO_ADV0_SHIFT 0 + #define NO_LFA_DUE_TO_DCC_MASK 0x00010000 + u32 lfa_sts; + #define LFA_LINK_FLAP_REASON_OFFSET 0 + #define LFA_LINK_FLAP_REASON_MASK 0x000000ff + #define LFA_LINK_DOWN 0x1 + #define LFA_LOOPBACK_ENABLED 0x2 + #define LFA_DUPLEX_MISMATCH 0x3 + #define LFA_MFW_IS_TOO_OLD 0x4 + #define LFA_LINK_SPEED_MISMATCH 0x5 + #define LFA_FLOW_CTRL_MISMATCH 0x6 + #define LFA_SPEED_CAP_MISMATCH 0x7 + #define LFA_DCC_LFA_DISABLED 0x8 + #define LFA_EEE_MISMATCH 0x9 + + #define LINK_FLAP_AVOIDANCE_COUNT_OFFSET 8 + #define LINK_FLAP_AVOIDANCE_COUNT_MASK 0x0000ff00 + + #define LINK_FLAP_COUNT_OFFSET 16 + #define LINK_FLAP_COUNT_MASK 0x00ff0000 + + #define LFA_FLAGS_MASK 0xff000000 + #define SHMEM_LFA_DONT_CLEAR_STAT (1<<24) +}; + +/* Used to support NSCI get OS driver version + * on driver load the version value will be set + * on driver unload driver value of 0x0 will be set. + */ +struct os_drv_ver { +#define DRV_VER_NOT_LOADED 0 + + /* personalties order is important */ +#define DRV_PERS_ETHERNET 0 +#define DRV_PERS_ISCSI 1 +#define DRV_PERS_FCOE 2 + + /* shmem2 struct is constant can't add more personalties here */ +#define MAX_DRV_PERS 3 + u32 versions[MAX_DRV_PERS]; +}; + +struct ncsi_oem_fcoe_features { + u32 fcoe_features1; + #define FCOE_FEATURES1_IOS_PER_CONNECTION_MASK 0x0000FFFF + #define FCOE_FEATURES1_IOS_PER_CONNECTION_OFFSET 0 + + #define FCOE_FEATURES1_LOGINS_PER_PORT_MASK 0xFFFF0000 + #define FCOE_FEATURES1_LOGINS_PER_PORT_OFFSET 16 + + u32 fcoe_features2; + #define FCOE_FEATURES2_EXCHANGES_MASK 0x0000FFFF + #define FCOE_FEATURES2_EXCHANGES_OFFSET 0 + + #define FCOE_FEATURES2_NPIV_WWN_PER_PORT_MASK 0xFFFF0000 + #define FCOE_FEATURES2_NPIV_WWN_PER_PORT_OFFSET 16 + + u32 fcoe_features3; + #define FCOE_FEATURES3_TARGETS_SUPPORTED_MASK 0x0000FFFF + #define FCOE_FEATURES3_TARGETS_SUPPORTED_OFFSET 0 + + #define FCOE_FEATURES3_OUTSTANDING_COMMANDS_MASK 0xFFFF0000 + #define FCOE_FEATURES3_OUTSTANDING_COMMANDS_OFFSET 16 + + u32 fcoe_features4; + #define FCOE_FEATURES4_FEATURE_SETTINGS_MASK 0x0000000F + #define FCOE_FEATURES4_FEATURE_SETTINGS_OFFSET 0 +}; + +enum curr_cfg_method_e { + CURR_CFG_MET_NONE = 0, /* default config */ + CURR_CFG_MET_OS = 1, + CURR_CFG_MET_VENDOR_SPEC = 2,/* e.g. Option ROM, NPAR, O/S Cfg Utils */ +}; + +#define FC_NPIV_WWPN_SIZE 8 +#define FC_NPIV_WWNN_SIZE 8 +struct bdn_npiv_settings { + u8 npiv_wwpn[FC_NPIV_WWPN_SIZE]; + u8 npiv_wwnn[FC_NPIV_WWNN_SIZE]; +}; + +struct bdn_fc_npiv_cfg { + /* hdr used internally by the MFW */ + u32 hdr; + u32 num_of_npiv; +}; + +#define MAX_NUMBER_NPIV 64 +struct bdn_fc_npiv_tbl { + struct bdn_fc_npiv_cfg fc_npiv_cfg; + struct bdn_npiv_settings settings[MAX_NUMBER_NPIV]; +}; + +struct mdump_driver_info { + u32 epoc; + u32 drv_ver; + u32 fw_ver; + + u32 valid_dump; + #define FIRST_DUMP_VALID (1 << 0) + #define SECOND_DUMP_VALID (1 << 1) + + u32 flags; + #define ENABLE_ALL_TRIGGERS (0x7fffffff) + #define TRIGGER_MDUMP_ONCE (1 << 31) +}; + +struct ncsi_oem_data { + u32 driver_version[4]; + struct ncsi_oem_fcoe_features ncsi_oem_fcoe_features; +}; + +struct shmem2_region { + + u32 size; /* 0x0000 */ + + u32 dcc_support; /* 0x0004 */ + #define SHMEM_DCC_SUPPORT_NONE 0x00000000 + #define SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV 0x00000001 + #define SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV 0x00000004 + #define SHMEM_DCC_SUPPORT_CHANGE_MAC_ADDRESS_TLV 0x00000008 + #define SHMEM_DCC_SUPPORT_SET_PROTOCOL_TLV 0x00000040 + #define SHMEM_DCC_SUPPORT_SET_PRIORITY_TLV 0x00000080 + + u32 ext_phy_fw_version2[PORT_MAX]; /* 0x0008 */ + /* + * For backwards compatibility, if the mf_cfg_addr does not exist + * (the size filed is smaller than 0xc) the mf_cfg resides at the + * end of struct shmem_region + */ + u32 mf_cfg_addr; /* 0x0010 */ + #define SHMEM_MF_CFG_ADDR_NONE 0x00000000 + + struct fw_flr_mb flr_mb; /* 0x0014 */ + u32 dcbx_lldp_params_offset; /* 0x0028 */ + #define SHMEM_LLDP_DCBX_PARAMS_NONE 0x00000000 + u32 dcbx_neg_res_offset; /* 0x002c */ + #define SHMEM_DCBX_NEG_RES_NONE 0x00000000 + u32 dcbx_remote_mib_offset; /* 0x0030 */ + #define SHMEM_DCBX_REMOTE_MIB_NONE 0x00000000 + /* + * The other shmemX_base_addr holds the other path's shmem address + * required for example in case of common phy init, or for path1 to know + * the address of mcp debug trace which is located in offset from shmem + * of path0 + */ + u32 other_shmem_base_addr; /* 0x0034 */ + u32 other_shmem2_base_addr; /* 0x0038 */ + /* + * mcp_vf_disabled is set by the MCP to indicate the driver about VFs + * which were disabled/flred + */ + u32 mcp_vf_disabled[E2_VF_MAX / 32]; /* 0x003c */ + + /* + * drv_ack_vf_disabled is set by the PF driver to ack handled disabled + * VFs + */ + u32 drv_ack_vf_disabled[E2_FUNC_MAX][E2_VF_MAX / 32]; /* 0x0044 */ + + u32 dcbx_lldp_dcbx_stat_offset; /* 0x0064 */ + #define SHMEM_LLDP_DCBX_STAT_NONE 0x00000000 + + /* + * edebug_driver_if field is used to transfer messages between edebug + * app to the driver through shmem2. + * + * message format: + * bits 0-2 - function number / instance of driver to perform request + * bits 3-5 - op code / is_ack? + * bits 6-63 - data + */ + u32 edebug_driver_if[2]; /* 0x0068 */ + #define EDEBUG_DRIVER_IF_OP_CODE_GET_PHYS_ADDR 1 + #define EDEBUG_DRIVER_IF_OP_CODE_GET_BUS_ADDR 2 + #define EDEBUG_DRIVER_IF_OP_CODE_DISABLE_STAT 3 + + u32 nvm_retain_bitmap_addr; /* 0x0070 */ + + /* afex support of that driver */ + u32 afex_driver_support; /* 0x0074 */ + #define SHMEM_AFEX_VERSION_MASK 0x100f + #define SHMEM_AFEX_SUPPORTED_VERSION_ONE 0x1001 + #define SHMEM_AFEX_REDUCED_DRV_LOADED 0x8000 + + /* driver receives addr in scratchpad to which it should respond */ + u32 afex_scratchpad_addr_to_write[E2_FUNC_MAX]; + + /* generic params from MCP to driver (value depends on the msg sent + * to driver + */ + u32 afex_param1_to_driver[E2_FUNC_MAX]; /* 0x0088 */ + u32 afex_param2_to_driver[E2_FUNC_MAX]; /* 0x0098 */ + + u32 swim_base_addr; /* 0x0108 */ + u32 swim_funcs; + u32 swim_main_cb; + + /* bitmap notifying which VIF profiles stored in nvram are enabled by + * switch + */ + u32 afex_profiles_enabled[2]; + + /* generic flags controlled by the driver */ + u32 drv_flags; + #define DRV_FLAGS_DCB_CONFIGURED 0x0 + #define DRV_FLAGS_DCB_CONFIGURATION_ABORTED 0x1 + #define DRV_FLAGS_DCB_MFW_CONFIGURED 0x2 + + #define DRV_FLAGS_PORT_MASK ((1 << DRV_FLAGS_DCB_CONFIGURED) | \ + (1 << DRV_FLAGS_DCB_CONFIGURATION_ABORTED) | \ + (1 << DRV_FLAGS_DCB_MFW_CONFIGURED)) + /* pointer to extended dev_info shared data copied from nvm image */ + u32 extended_dev_info_shared_addr; + u32 ncsi_oem_data_addr; + + u32 ocsd_host_addr; /* initialized by option ROM */ + u32 ocbb_host_addr; /* initialized by option ROM */ + u32 ocsd_req_update_interval; /* initialized by option ROM */ + u32 temperature_in_half_celsius; + u32 glob_struct_in_host; + + u32 dcbx_neg_res_ext_offset; +#define SHMEM_DCBX_NEG_RES_EXT_NONE 0x00000000 + + u32 drv_capabilities_flag[E2_FUNC_MAX]; +#define DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED 0x00000001 +#define DRV_FLAGS_CAPABILITIES_LOADED_L2 0x00000002 +#define DRV_FLAGS_CAPABILITIES_LOADED_FCOE 0x00000004 +#define DRV_FLAGS_CAPABILITIES_LOADED_ISCSI 0x00000008 +#define DRV_FLAGS_MTU_MASK 0xffff0000 +#define DRV_FLAGS_MTU_SHIFT 16 + + u32 extended_dev_info_shared_cfg_size; + + u32 dcbx_en[PORT_MAX]; + + /* The offset points to the multi threaded meta structure */ + u32 multi_thread_data_offset; + + /* address of DMAable host address holding values from the drivers */ + u32 drv_info_host_addr_lo; + u32 drv_info_host_addr_hi; + + /* general values written by the MFW (such as current version) */ + u32 drv_info_control; +#define DRV_INFO_CONTROL_VER_MASK 0x000000ff +#define DRV_INFO_CONTROL_VER_SHIFT 0 +#define DRV_INFO_CONTROL_OP_CODE_MASK 0x0000ff00 +#define DRV_INFO_CONTROL_OP_CODE_SHIFT 8 + u32 ibft_host_addr; /* initialized by option ROM */ + struct eee_remote_vals eee_remote_vals[PORT_MAX]; + u32 reserved[E2_FUNC_MAX]; + + + /* the status of EEE auto-negotiation + * bits 15:0 the configured tx-lpi entry timer value. Depends on bit 31. + * bits 19:16 the supported modes for EEE. + * bits 23:20 the speeds advertised for EEE. + * bits 27:24 the speeds the Link partner advertised for EEE. + * The supported/adv. modes in bits 27:19 originate from the + * SHMEM_EEE_XXX_ADV definitions (where XXX is replaced by speed). + * bit 28 when 1'b1 EEE was requested. + * bit 29 when 1'b1 tx lpi was requested. + * bit 30 when 1'b1 EEE was negotiated. Tx lpi will be asserted iff + * 30:29 are 2'b11. + * bit 31 when 1'b0 bits 15:0 contain a PORT_FEAT_CFG_EEE_ define as + * value. When 1'b1 those bits contains a value times 16 microseconds. + */ + u32 eee_status[PORT_MAX]; + #define SHMEM_EEE_TIMER_MASK 0x0000ffff + #define SHMEM_EEE_SUPPORTED_MASK 0x000f0000 + #define SHMEM_EEE_SUPPORTED_SHIFT 16 + #define SHMEM_EEE_ADV_STATUS_MASK 0x00f00000 + #define SHMEM_EEE_100M_ADV (1<<0) + #define SHMEM_EEE_1G_ADV (1<<1) + #define SHMEM_EEE_10G_ADV (1<<2) + #define SHMEM_EEE_ADV_STATUS_SHIFT 20 + #define SHMEM_EEE_LP_ADV_STATUS_MASK 0x0f000000 + #define SHMEM_EEE_LP_ADV_STATUS_SHIFT 24 + #define SHMEM_EEE_REQUESTED_BIT 0x10000000 + #define SHMEM_EEE_LPI_REQUESTED_BIT 0x20000000 + #define SHMEM_EEE_ACTIVE_BIT 0x40000000 + #define SHMEM_EEE_TIME_OUTPUT_BIT 0x80000000 + + u32 sizeof_port_stats; + + /* Link Flap Avoidance */ + u32 lfa_host_addr[PORT_MAX]; + u32 reserved1; + + u32 reserved2; /* Offset 0x148 */ + u32 reserved3; /* Offset 0x14C */ + u32 reserved4; /* Offset 0x150 */ + u32 link_attr_sync[PORT_MAX]; /* Offset 0x154 */ + #define LINK_ATTR_SYNC_KR2_ENABLE 0x00000001 + #define LINK_ATTR_84858 0x00000002 + #define LINK_SFP_EEPROM_COMP_CODE_MASK 0x0000ff00 + #define LINK_SFP_EEPROM_COMP_CODE_SHIFT 8 + #define LINK_SFP_EEPROM_COMP_CODE_SR 0x00001000 + #define LINK_SFP_EEPROM_COMP_CODE_LR 0x00002000 + #define LINK_SFP_EEPROM_COMP_CODE_LRM 0x00004000 + + u32 reserved5[2]; + u32 link_change_count[PORT_MAX]; /* Offset 0x160-0x164 */ + #define LINK_CHANGE_COUNT_MASK 0xff /* Offset 0x168 */ + /* driver version for each personality */ + struct os_drv_ver func_os_drv_ver[E2_FUNC_MAX]; /* Offset 0x16c */ + + /* Flag to the driver that PF's drv_info_host_addr buffer was read */ + u32 mfw_drv_indication; + + /* We use indication for each PF (0..3) */ +#define MFW_DRV_IND_READ_DONE_OFFSET(_pf_) (1 << (_pf_)) + union { /* For various OEMs */ /* Offset 0x1a0 */ + u8 storage_boot_prog[E2_FUNC_MAX]; + #define STORAGE_BOOT_PROG_MASK 0x000000FF + #define STORAGE_BOOT_PROG_NONE 0x00000000 + #define STORAGE_BOOT_PROG_ISCSI_IP_ACQUIRED 0x00000002 + #define STORAGE_BOOT_PROG_FCOE_FABRIC_LOGIN_SUCCESS 0x00000002 + #define STORAGE_BOOT_PROG_TARGET_FOUND 0x00000004 + #define STORAGE_BOOT_PROG_ISCSI_CHAP_SUCCESS 0x00000008 + #define STORAGE_BOOT_PROG_FCOE_LUN_FOUND 0x00000008 + #define STORAGE_BOOT_PROG_LOGGED_INTO_TGT 0x00000010 + #define STORAGE_BOOT_PROG_IMG_DOWNLOADED 0x00000020 + #define STORAGE_BOOT_PROG_OS_HANDOFF 0x00000040 + #define STORAGE_BOOT_PROG_COMPLETED 0x00000080 + + u32 oem_i2c_data_addr; + }; + + /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */ + /* For PCP values 0-3 use the map lower */ + /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1, + * 0x0000FF00 - PCP 2, 0x000000FF PCP 3 + */ + u32 c2s_pcp_map_lower[E2_FUNC_MAX]; /* 0x1a4 */ + + /* For PCP values 4-7 use the map upper */ + /* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5, + * 0x0000FF00 - PCP 6, 0x000000FF PCP 7 + */ + u32 c2s_pcp_map_upper[E2_FUNC_MAX]; /* 0x1b4 */ + + /* For PCP default value get the MSB byte of the map default */ + u32 c2s_pcp_map_default[E2_FUNC_MAX]; /* 0x1c4 */ + + /* FC_NPIV table offset in NVRAM */ + u32 fc_npiv_nvram_tbl_addr[PORT_MAX]; /* 0x1d4 */ + + /* Shows last method that changed configuration of this device */ + enum curr_cfg_method_e curr_cfg; /* 0x1dc */ + + /* Storm FW version, shold be kept in the format 0xMMmmbbdd: + * MM - Major, mm - Minor, bb - Build ,dd - Drop + */ + u32 netproc_fw_ver; /* 0x1e0 */ + + /* Option ROM SMASH CLP version */ + u32 clp_ver; /* 0x1e4 */ + + u32 pcie_bus_num; /* 0x1e8 */ + + u32 sriov_switch_mode; /* 0x1ec */ + #define SRIOV_SWITCH_MODE_NONE 0x0 + #define SRIOV_SWITCH_MODE_VEB 0x1 + #define SRIOV_SWITCH_MODE_VEPA 0x2 + + u8 rsrv2[E2_FUNC_MAX]; /* 0x1f0 */ + + u32 img_inv_table_addr; /* Address to INV_TABLE_P */ /* 0x1f4 */ + + u32 mtu_size[E2_FUNC_MAX]; /* 0x1f8 */ + + u32 os_driver_state[E2_FUNC_MAX]; /* 0x208 */ + #define OS_DRIVER_STATE_NOT_LOADED 0 /* not installed */ + #define OS_DRIVER_STATE_LOADING 1 /* transition state */ + #define OS_DRIVER_STATE_DISABLED 2 /* installed but disabled */ + #define OS_DRIVER_STATE_ACTIVE 3 /* installed and active */ + + /* mini dump driver info */ + struct mdump_driver_info drv_info; /* 0x218 */ +}; + + +struct emac_stats { + u32 rx_stat_ifhcinoctets; + u32 rx_stat_ifhcinbadoctets; + u32 rx_stat_etherstatsfragments; + u32 rx_stat_ifhcinucastpkts; + u32 rx_stat_ifhcinmulticastpkts; + u32 rx_stat_ifhcinbroadcastpkts; + u32 rx_stat_dot3statsfcserrors; + u32 rx_stat_dot3statsalignmenterrors; + u32 rx_stat_dot3statscarriersenseerrors; + u32 rx_stat_xonpauseframesreceived; + u32 rx_stat_xoffpauseframesreceived; + u32 rx_stat_maccontrolframesreceived; + u32 rx_stat_xoffstateentered; + u32 rx_stat_dot3statsframestoolong; + u32 rx_stat_etherstatsjabbers; + u32 rx_stat_etherstatsundersizepkts; + u32 rx_stat_etherstatspkts64octets; + u32 rx_stat_etherstatspkts65octetsto127octets; + u32 rx_stat_etherstatspkts128octetsto255octets; + u32 rx_stat_etherstatspkts256octetsto511octets; + u32 rx_stat_etherstatspkts512octetsto1023octets; + u32 rx_stat_etherstatspkts1024octetsto1522octets; + u32 rx_stat_etherstatspktsover1522octets; + + u32 rx_stat_falsecarriererrors; + + u32 tx_stat_ifhcoutoctets; + u32 tx_stat_ifhcoutbadoctets; + u32 tx_stat_etherstatscollisions; + u32 tx_stat_outxonsent; + u32 tx_stat_outxoffsent; + u32 tx_stat_flowcontroldone; + u32 tx_stat_dot3statssinglecollisionframes; + u32 tx_stat_dot3statsmultiplecollisionframes; + u32 tx_stat_dot3statsdeferredtransmissions; + u32 tx_stat_dot3statsexcessivecollisions; + u32 tx_stat_dot3statslatecollisions; + u32 tx_stat_ifhcoutucastpkts; + u32 tx_stat_ifhcoutmulticastpkts; + u32 tx_stat_ifhcoutbroadcastpkts; + u32 tx_stat_etherstatspkts64octets; + u32 tx_stat_etherstatspkts65octetsto127octets; + u32 tx_stat_etherstatspkts128octetsto255octets; + u32 tx_stat_etherstatspkts256octetsto511octets; + u32 tx_stat_etherstatspkts512octetsto1023octets; + u32 tx_stat_etherstatspkts1024octetsto1522octets; + u32 tx_stat_etherstatspktsover1522octets; + u32 tx_stat_dot3statsinternalmactransmiterrors; +}; + + +struct bmac1_stats { + u32 tx_stat_gtpkt_lo; + u32 tx_stat_gtpkt_hi; + u32 tx_stat_gtxpf_lo; + u32 tx_stat_gtxpf_hi; + u32 tx_stat_gtfcs_lo; + u32 tx_stat_gtfcs_hi; + u32 tx_stat_gtmca_lo; + u32 tx_stat_gtmca_hi; + u32 tx_stat_gtbca_lo; + u32 tx_stat_gtbca_hi; + u32 tx_stat_gtfrg_lo; + u32 tx_stat_gtfrg_hi; + u32 tx_stat_gtovr_lo; + u32 tx_stat_gtovr_hi; + u32 tx_stat_gt64_lo; + u32 tx_stat_gt64_hi; + u32 tx_stat_gt127_lo; + u32 tx_stat_gt127_hi; + u32 tx_stat_gt255_lo; + u32 tx_stat_gt255_hi; + u32 tx_stat_gt511_lo; + u32 tx_stat_gt511_hi; + u32 tx_stat_gt1023_lo; + u32 tx_stat_gt1023_hi; + u32 tx_stat_gt1518_lo; + u32 tx_stat_gt1518_hi; + u32 tx_stat_gt2047_lo; + u32 tx_stat_gt2047_hi; + u32 tx_stat_gt4095_lo; + u32 tx_stat_gt4095_hi; + u32 tx_stat_gt9216_lo; + u32 tx_stat_gt9216_hi; + u32 tx_stat_gt16383_lo; + u32 tx_stat_gt16383_hi; + u32 tx_stat_gtmax_lo; + u32 tx_stat_gtmax_hi; + u32 tx_stat_gtufl_lo; + u32 tx_stat_gtufl_hi; + u32 tx_stat_gterr_lo; + u32 tx_stat_gterr_hi; + u32 tx_stat_gtbyt_lo; + u32 tx_stat_gtbyt_hi; + + u32 rx_stat_gr64_lo; + u32 rx_stat_gr64_hi; + u32 rx_stat_gr127_lo; + u32 rx_stat_gr127_hi; + u32 rx_stat_gr255_lo; + u32 rx_stat_gr255_hi; + u32 rx_stat_gr511_lo; + u32 rx_stat_gr511_hi; + u32 rx_stat_gr1023_lo; + u32 rx_stat_gr1023_hi; + u32 rx_stat_gr1518_lo; + u32 rx_stat_gr1518_hi; + u32 rx_stat_gr2047_lo; + u32 rx_stat_gr2047_hi; + u32 rx_stat_gr4095_lo; + u32 rx_stat_gr4095_hi; + u32 rx_stat_gr9216_lo; + u32 rx_stat_gr9216_hi; + u32 rx_stat_gr16383_lo; + u32 rx_stat_gr16383_hi; + u32 rx_stat_grmax_lo; + u32 rx_stat_grmax_hi; + u32 rx_stat_grpkt_lo; + u32 rx_stat_grpkt_hi; + u32 rx_stat_grfcs_lo; + u32 rx_stat_grfcs_hi; + u32 rx_stat_grmca_lo; + u32 rx_stat_grmca_hi; + u32 rx_stat_grbca_lo; + u32 rx_stat_grbca_hi; + u32 rx_stat_grxcf_lo; + u32 rx_stat_grxcf_hi; + u32 rx_stat_grxpf_lo; + u32 rx_stat_grxpf_hi; + u32 rx_stat_grxuo_lo; + u32 rx_stat_grxuo_hi; + u32 rx_stat_grjbr_lo; + u32 rx_stat_grjbr_hi; + u32 rx_stat_grovr_lo; + u32 rx_stat_grovr_hi; + u32 rx_stat_grflr_lo; + u32 rx_stat_grflr_hi; + u32 rx_stat_grmeg_lo; + u32 rx_stat_grmeg_hi; + u32 rx_stat_grmeb_lo; + u32 rx_stat_grmeb_hi; + u32 rx_stat_grbyt_lo; + u32 rx_stat_grbyt_hi; + u32 rx_stat_grund_lo; + u32 rx_stat_grund_hi; + u32 rx_stat_grfrg_lo; + u32 rx_stat_grfrg_hi; + u32 rx_stat_grerb_lo; + u32 rx_stat_grerb_hi; + u32 rx_stat_grfre_lo; + u32 rx_stat_grfre_hi; + u32 rx_stat_gripj_lo; + u32 rx_stat_gripj_hi; +}; + +struct bmac2_stats { + u32 tx_stat_gtpk_lo; /* gtpok */ + u32 tx_stat_gtpk_hi; /* gtpok */ + u32 tx_stat_gtxpf_lo; /* gtpf */ + u32 tx_stat_gtxpf_hi; /* gtpf */ + u32 tx_stat_gtpp_lo; /* NEW BMAC2 */ + u32 tx_stat_gtpp_hi; /* NEW BMAC2 */ + u32 tx_stat_gtfcs_lo; + u32 tx_stat_gtfcs_hi; + u32 tx_stat_gtuca_lo; /* NEW BMAC2 */ + u32 tx_stat_gtuca_hi; /* NEW BMAC2 */ + u32 tx_stat_gtmca_lo; + u32 tx_stat_gtmca_hi; + u32 tx_stat_gtbca_lo; + u32 tx_stat_gtbca_hi; + u32 tx_stat_gtovr_lo; + u32 tx_stat_gtovr_hi; + u32 tx_stat_gtfrg_lo; + u32 tx_stat_gtfrg_hi; + u32 tx_stat_gtpkt1_lo; /* gtpkt */ + u32 tx_stat_gtpkt1_hi; /* gtpkt */ + u32 tx_stat_gt64_lo; + u32 tx_stat_gt64_hi; + u32 tx_stat_gt127_lo; + u32 tx_stat_gt127_hi; + u32 tx_stat_gt255_lo; + u32 tx_stat_gt255_hi; + u32 tx_stat_gt511_lo; + u32 tx_stat_gt511_hi; + u32 tx_stat_gt1023_lo; + u32 tx_stat_gt1023_hi; + u32 tx_stat_gt1518_lo; + u32 tx_stat_gt1518_hi; + u32 tx_stat_gt2047_lo; + u32 tx_stat_gt2047_hi; + u32 tx_stat_gt4095_lo; + u32 tx_stat_gt4095_hi; + u32 tx_stat_gt9216_lo; + u32 tx_stat_gt9216_hi; + u32 tx_stat_gt16383_lo; + u32 tx_stat_gt16383_hi; + u32 tx_stat_gtmax_lo; + u32 tx_stat_gtmax_hi; + u32 tx_stat_gtufl_lo; + u32 tx_stat_gtufl_hi; + u32 tx_stat_gterr_lo; + u32 tx_stat_gterr_hi; + u32 tx_stat_gtbyt_lo; + u32 tx_stat_gtbyt_hi; + + u32 rx_stat_gr64_lo; + u32 rx_stat_gr64_hi; + u32 rx_stat_gr127_lo; + u32 rx_stat_gr127_hi; + u32 rx_stat_gr255_lo; + u32 rx_stat_gr255_hi; + u32 rx_stat_gr511_lo; + u32 rx_stat_gr511_hi; + u32 rx_stat_gr1023_lo; + u32 rx_stat_gr1023_hi; + u32 rx_stat_gr1518_lo; + u32 rx_stat_gr1518_hi; + u32 rx_stat_gr2047_lo; + u32 rx_stat_gr2047_hi; + u32 rx_stat_gr4095_lo; + u32 rx_stat_gr4095_hi; + u32 rx_stat_gr9216_lo; + u32 rx_stat_gr9216_hi; + u32 rx_stat_gr16383_lo; + u32 rx_stat_gr16383_hi; + u32 rx_stat_grmax_lo; + u32 rx_stat_grmax_hi; + u32 rx_stat_grpkt_lo; + u32 rx_stat_grpkt_hi; + u32 rx_stat_grfcs_lo; + u32 rx_stat_grfcs_hi; + u32 rx_stat_gruca_lo; + u32 rx_stat_gruca_hi; + u32 rx_stat_grmca_lo; + u32 rx_stat_grmca_hi; + u32 rx_stat_grbca_lo; + u32 rx_stat_grbca_hi; + u32 rx_stat_grxpf_lo; /* grpf */ + u32 rx_stat_grxpf_hi; /* grpf */ + u32 rx_stat_grpp_lo; + u32 rx_stat_grpp_hi; + u32 rx_stat_grxuo_lo; /* gruo */ + u32 rx_stat_grxuo_hi; /* gruo */ + u32 rx_stat_grjbr_lo; + u32 rx_stat_grjbr_hi; + u32 rx_stat_grovr_lo; + u32 rx_stat_grovr_hi; + u32 rx_stat_grxcf_lo; /* grcf */ + u32 rx_stat_grxcf_hi; /* grcf */ + u32 rx_stat_grflr_lo; + u32 rx_stat_grflr_hi; + u32 rx_stat_grpok_lo; + u32 rx_stat_grpok_hi; + u32 rx_stat_grmeg_lo; + u32 rx_stat_grmeg_hi; + u32 rx_stat_grmeb_lo; + u32 rx_stat_grmeb_hi; + u32 rx_stat_grbyt_lo; + u32 rx_stat_grbyt_hi; + u32 rx_stat_grund_lo; + u32 rx_stat_grund_hi; + u32 rx_stat_grfrg_lo; + u32 rx_stat_grfrg_hi; + u32 rx_stat_grerb_lo; /* grerrbyt */ + u32 rx_stat_grerb_hi; /* grerrbyt */ + u32 rx_stat_grfre_lo; /* grfrerr */ + u32 rx_stat_grfre_hi; /* grfrerr */ + u32 rx_stat_gripj_lo; + u32 rx_stat_gripj_hi; +}; + +struct mstat_stats { + struct { + /* OTE MSTAT on E3 has a bug where this register's contents are + * actually tx_gtxpok + tx_gtxpf + (possibly)tx_gtxpp + */ + u32 tx_gtxpok_lo; + u32 tx_gtxpok_hi; + u32 tx_gtxpf_lo; + u32 tx_gtxpf_hi; + u32 tx_gtxpp_lo; + u32 tx_gtxpp_hi; + u32 tx_gtfcs_lo; + u32 tx_gtfcs_hi; + u32 tx_gtuca_lo; + u32 tx_gtuca_hi; + u32 tx_gtmca_lo; + u32 tx_gtmca_hi; + u32 tx_gtgca_lo; + u32 tx_gtgca_hi; + u32 tx_gtpkt_lo; + u32 tx_gtpkt_hi; + u32 tx_gt64_lo; + u32 tx_gt64_hi; + u32 tx_gt127_lo; + u32 tx_gt127_hi; + u32 tx_gt255_lo; + u32 tx_gt255_hi; + u32 tx_gt511_lo; + u32 tx_gt511_hi; + u32 tx_gt1023_lo; + u32 tx_gt1023_hi; + u32 tx_gt1518_lo; + u32 tx_gt1518_hi; + u32 tx_gt2047_lo; + u32 tx_gt2047_hi; + u32 tx_gt4095_lo; + u32 tx_gt4095_hi; + u32 tx_gt9216_lo; + u32 tx_gt9216_hi; + u32 tx_gt16383_lo; + u32 tx_gt16383_hi; + u32 tx_gtufl_lo; + u32 tx_gtufl_hi; + u32 tx_gterr_lo; + u32 tx_gterr_hi; + u32 tx_gtbyt_lo; + u32 tx_gtbyt_hi; + u32 tx_collisions_lo; + u32 tx_collisions_hi; + u32 tx_singlecollision_lo; + u32 tx_singlecollision_hi; + u32 tx_multiplecollisions_lo; + u32 tx_multiplecollisions_hi; + u32 tx_deferred_lo; + u32 tx_deferred_hi; + u32 tx_excessivecollisions_lo; + u32 tx_excessivecollisions_hi; + u32 tx_latecollisions_lo; + u32 tx_latecollisions_hi; + } stats_tx; + + struct { + u32 rx_gr64_lo; + u32 rx_gr64_hi; + u32 rx_gr127_lo; + u32 rx_gr127_hi; + u32 rx_gr255_lo; + u32 rx_gr255_hi; + u32 rx_gr511_lo; + u32 rx_gr511_hi; + u32 rx_gr1023_lo; + u32 rx_gr1023_hi; + u32 rx_gr1518_lo; + u32 rx_gr1518_hi; + u32 rx_gr2047_lo; + u32 rx_gr2047_hi; + u32 rx_gr4095_lo; + u32 rx_gr4095_hi; + u32 rx_gr9216_lo; + u32 rx_gr9216_hi; + u32 rx_gr16383_lo; + u32 rx_gr16383_hi; + u32 rx_grpkt_lo; + u32 rx_grpkt_hi; + u32 rx_grfcs_lo; + u32 rx_grfcs_hi; + u32 rx_gruca_lo; + u32 rx_gruca_hi; + u32 rx_grmca_lo; + u32 rx_grmca_hi; + u32 rx_grbca_lo; + u32 rx_grbca_hi; + u32 rx_grxpf_lo; + u32 rx_grxpf_hi; + u32 rx_grxpp_lo; + u32 rx_grxpp_hi; + u32 rx_grxuo_lo; + u32 rx_grxuo_hi; + u32 rx_grovr_lo; + u32 rx_grovr_hi; + u32 rx_grxcf_lo; + u32 rx_grxcf_hi; + u32 rx_grflr_lo; + u32 rx_grflr_hi; + u32 rx_grpok_lo; + u32 rx_grpok_hi; + u32 rx_grbyt_lo; + u32 rx_grbyt_hi; + u32 rx_grund_lo; + u32 rx_grund_hi; + u32 rx_grfrg_lo; + u32 rx_grfrg_hi; + u32 rx_grerb_lo; + u32 rx_grerb_hi; + u32 rx_grfre_lo; + u32 rx_grfre_hi; + + u32 rx_alignmenterrors_lo; + u32 rx_alignmenterrors_hi; + u32 rx_falsecarrier_lo; + u32 rx_falsecarrier_hi; + u32 rx_llfcmsgcnt_lo; + u32 rx_llfcmsgcnt_hi; + } stats_rx; +}; + +union mac_stats { + struct emac_stats emac_stats; + struct bmac1_stats bmac1_stats; + struct bmac2_stats bmac2_stats; + struct mstat_stats mstat_stats; +}; + + +struct mac_stx { + /* in_bad_octets */ + u32 rx_stat_ifhcinbadoctets_hi; + u32 rx_stat_ifhcinbadoctets_lo; + + /* out_bad_octets */ + u32 tx_stat_ifhcoutbadoctets_hi; + u32 tx_stat_ifhcoutbadoctets_lo; + + /* crc_receive_errors */ + u32 rx_stat_dot3statsfcserrors_hi; + u32 rx_stat_dot3statsfcserrors_lo; + /* alignment_errors */ + u32 rx_stat_dot3statsalignmenterrors_hi; + u32 rx_stat_dot3statsalignmenterrors_lo; + /* carrier_sense_errors */ + u32 rx_stat_dot3statscarriersenseerrors_hi; + u32 rx_stat_dot3statscarriersenseerrors_lo; + /* false_carrier_detections */ + u32 rx_stat_falsecarriererrors_hi; + u32 rx_stat_falsecarriererrors_lo; + + /* runt_packets_received */ + u32 rx_stat_etherstatsundersizepkts_hi; + u32 rx_stat_etherstatsundersizepkts_lo; + /* jabber_packets_received */ + u32 rx_stat_dot3statsframestoolong_hi; + u32 rx_stat_dot3statsframestoolong_lo; + + /* error_runt_packets_received */ + u32 rx_stat_etherstatsfragments_hi; + u32 rx_stat_etherstatsfragments_lo; + /* error_jabber_packets_received */ + u32 rx_stat_etherstatsjabbers_hi; + u32 rx_stat_etherstatsjabbers_lo; + + /* control_frames_received */ + u32 rx_stat_maccontrolframesreceived_hi; + u32 rx_stat_maccontrolframesreceived_lo; + u32 rx_stat_mac_xpf_hi; + u32 rx_stat_mac_xpf_lo; + u32 rx_stat_mac_xcf_hi; + u32 rx_stat_mac_xcf_lo; + + /* xoff_state_entered */ + u32 rx_stat_xoffstateentered_hi; + u32 rx_stat_xoffstateentered_lo; + /* pause_xon_frames_received */ + u32 rx_stat_xonpauseframesreceived_hi; + u32 rx_stat_xonpauseframesreceived_lo; + /* pause_xoff_frames_received */ + u32 rx_stat_xoffpauseframesreceived_hi; + u32 rx_stat_xoffpauseframesreceived_lo; + /* pause_xon_frames_transmitted */ + u32 tx_stat_outxonsent_hi; + u32 tx_stat_outxonsent_lo; + /* pause_xoff_frames_transmitted */ + u32 tx_stat_outxoffsent_hi; + u32 tx_stat_outxoffsent_lo; + /* flow_control_done */ + u32 tx_stat_flowcontroldone_hi; + u32 tx_stat_flowcontroldone_lo; + + /* ether_stats_collisions */ + u32 tx_stat_etherstatscollisions_hi; + u32 tx_stat_etherstatscollisions_lo; + /* single_collision_transmit_frames */ + u32 tx_stat_dot3statssinglecollisionframes_hi; + u32 tx_stat_dot3statssinglecollisionframes_lo; + /* multiple_collision_transmit_frames */ + u32 tx_stat_dot3statsmultiplecollisionframes_hi; + u32 tx_stat_dot3statsmultiplecollisionframes_lo; + /* deferred_transmissions */ + u32 tx_stat_dot3statsdeferredtransmissions_hi; + u32 tx_stat_dot3statsdeferredtransmissions_lo; + /* excessive_collision_frames */ + u32 tx_stat_dot3statsexcessivecollisions_hi; + u32 tx_stat_dot3statsexcessivecollisions_lo; + /* late_collision_frames */ + u32 tx_stat_dot3statslatecollisions_hi; + u32 tx_stat_dot3statslatecollisions_lo; + + /* frames_transmitted_64_bytes */ + u32 tx_stat_etherstatspkts64octets_hi; + u32 tx_stat_etherstatspkts64octets_lo; + /* frames_transmitted_65_127_bytes */ + u32 tx_stat_etherstatspkts65octetsto127octets_hi; + u32 tx_stat_etherstatspkts65octetsto127octets_lo; + /* frames_transmitted_128_255_bytes */ + u32 tx_stat_etherstatspkts128octetsto255octets_hi; + u32 tx_stat_etherstatspkts128octetsto255octets_lo; + /* frames_transmitted_256_511_bytes */ + u32 tx_stat_etherstatspkts256octetsto511octets_hi; + u32 tx_stat_etherstatspkts256octetsto511octets_lo; + /* frames_transmitted_512_1023_bytes */ + u32 tx_stat_etherstatspkts512octetsto1023octets_hi; + u32 tx_stat_etherstatspkts512octetsto1023octets_lo; + /* frames_transmitted_1024_1522_bytes */ + u32 tx_stat_etherstatspkts1024octetsto1522octets_hi; + u32 tx_stat_etherstatspkts1024octetsto1522octets_lo; + /* frames_transmitted_1523_9022_bytes */ + u32 tx_stat_etherstatspktsover1522octets_hi; + u32 tx_stat_etherstatspktsover1522octets_lo; + u32 tx_stat_mac_2047_hi; + u32 tx_stat_mac_2047_lo; + u32 tx_stat_mac_4095_hi; + u32 tx_stat_mac_4095_lo; + u32 tx_stat_mac_9216_hi; + u32 tx_stat_mac_9216_lo; + u32 tx_stat_mac_16383_hi; + u32 tx_stat_mac_16383_lo; + + /* internal_mac_transmit_errors */ + u32 tx_stat_dot3statsinternalmactransmiterrors_hi; + u32 tx_stat_dot3statsinternalmactransmiterrors_lo; + + /* if_out_discards */ + u32 tx_stat_mac_ufl_hi; + u32 tx_stat_mac_ufl_lo; +}; + + +#define MAC_STX_IDX_MAX 2 + +struct host_port_stats { + u32 host_port_stats_counter; + + struct mac_stx mac_stx[MAC_STX_IDX_MAX]; + + u32 brb_drop_hi; + u32 brb_drop_lo; + + u32 not_used; /* obsolete */ + u32 pfc_frames_tx_hi; + u32 pfc_frames_tx_lo; + u32 pfc_frames_rx_hi; + u32 pfc_frames_rx_lo; + + u32 eee_lpi_count_hi; + u32 eee_lpi_count_lo; +}; + + +struct host_func_stats { + u32 host_func_stats_start; + + u32 total_bytes_received_hi; + u32 total_bytes_received_lo; + + u32 total_bytes_transmitted_hi; + u32 total_bytes_transmitted_lo; + + u32 total_unicast_packets_received_hi; + u32 total_unicast_packets_received_lo; + + u32 total_multicast_packets_received_hi; + u32 total_multicast_packets_received_lo; + + u32 total_broadcast_packets_received_hi; + u32 total_broadcast_packets_received_lo; + + u32 total_unicast_packets_transmitted_hi; + u32 total_unicast_packets_transmitted_lo; + + u32 total_multicast_packets_transmitted_hi; + u32 total_multicast_packets_transmitted_lo; + + u32 total_broadcast_packets_transmitted_hi; + u32 total_broadcast_packets_transmitted_lo; + + u32 valid_bytes_received_hi; + u32 valid_bytes_received_lo; + + u32 host_func_stats_end; +}; + +/* VIC definitions */ +#define VICSTATST_UIF_INDEX 2 + + +/* stats collected for afex. + * NOTE: structure is exactly as expected to be received by the switch. + * order must remain exactly as is unless protocol changes ! + */ +struct afex_stats { + u32 tx_unicast_frames_hi; + u32 tx_unicast_frames_lo; + u32 tx_unicast_bytes_hi; + u32 tx_unicast_bytes_lo; + u32 tx_multicast_frames_hi; + u32 tx_multicast_frames_lo; + u32 tx_multicast_bytes_hi; + u32 tx_multicast_bytes_lo; + u32 tx_broadcast_frames_hi; + u32 tx_broadcast_frames_lo; + u32 tx_broadcast_bytes_hi; + u32 tx_broadcast_bytes_lo; + u32 tx_frames_discarded_hi; + u32 tx_frames_discarded_lo; + u32 tx_frames_dropped_hi; + u32 tx_frames_dropped_lo; + + u32 rx_unicast_frames_hi; + u32 rx_unicast_frames_lo; + u32 rx_unicast_bytes_hi; + u32 rx_unicast_bytes_lo; + u32 rx_multicast_frames_hi; + u32 rx_multicast_frames_lo; + u32 rx_multicast_bytes_hi; + u32 rx_multicast_bytes_lo; + u32 rx_broadcast_frames_hi; + u32 rx_broadcast_frames_lo; + u32 rx_broadcast_bytes_hi; + u32 rx_broadcast_bytes_lo; + u32 rx_frames_discarded_hi; + u32 rx_frames_discarded_lo; + u32 rx_frames_dropped_hi; + u32 rx_frames_dropped_lo; +}; + +#define BCM_5710_FW_MAJOR_VERSION 7 +#define BCM_5710_FW_MINOR_VERSION 13 +#define BCM_5710_FW_REVISION_VERSION 1 +#define BCM_5710_FW_ENGINEERING_VERSION 0 +#define BCM_5710_FW_COMPILE_FLAGS 1 + + +/* + * attention bits + */ +struct atten_sp_status_block { + __le32 attn_bits; + __le32 attn_bits_ack; + u8 status_block_id; + u8 reserved0; + __le16 attn_bits_index; + __le32 reserved1; +}; + + +/* + * The eth aggregative context of Cstorm + */ +struct cstorm_eth_ag_context { + u32 __reserved0[10]; +}; + + +/* + * dmae command structure + */ +struct dmae_command { + u32 opcode; +#define DMAE_COMMAND_SRC (0x1<<0) +#define DMAE_COMMAND_SRC_SHIFT 0 +#define DMAE_COMMAND_DST (0x3<<1) +#define DMAE_COMMAND_DST_SHIFT 1 +#define DMAE_COMMAND_C_DST (0x1<<3) +#define DMAE_COMMAND_C_DST_SHIFT 3 +#define DMAE_COMMAND_C_TYPE_ENABLE (0x1<<4) +#define DMAE_COMMAND_C_TYPE_ENABLE_SHIFT 4 +#define DMAE_COMMAND_C_TYPE_CRC_ENABLE (0x1<<5) +#define DMAE_COMMAND_C_TYPE_CRC_ENABLE_SHIFT 5 +#define DMAE_COMMAND_C_TYPE_CRC_OFFSET (0x7<<6) +#define DMAE_COMMAND_C_TYPE_CRC_OFFSET_SHIFT 6 +#define DMAE_COMMAND_ENDIANITY (0x3<<9) +#define DMAE_COMMAND_ENDIANITY_SHIFT 9 +#define DMAE_COMMAND_PORT (0x1<<11) +#define DMAE_COMMAND_PORT_SHIFT 11 +#define DMAE_COMMAND_CRC_RESET (0x1<<12) +#define DMAE_COMMAND_CRC_RESET_SHIFT 12 +#define DMAE_COMMAND_SRC_RESET (0x1<<13) +#define DMAE_COMMAND_SRC_RESET_SHIFT 13 +#define DMAE_COMMAND_DST_RESET (0x1<<14) +#define DMAE_COMMAND_DST_RESET_SHIFT 14 +#define DMAE_COMMAND_E1HVN (0x3<<15) +#define DMAE_COMMAND_E1HVN_SHIFT 15 +#define DMAE_COMMAND_DST_VN (0x3<<17) +#define DMAE_COMMAND_DST_VN_SHIFT 17 +#define DMAE_COMMAND_C_FUNC (0x1<<19) +#define DMAE_COMMAND_C_FUNC_SHIFT 19 +#define DMAE_COMMAND_ERR_POLICY (0x3<<20) +#define DMAE_COMMAND_ERR_POLICY_SHIFT 20 +#define DMAE_COMMAND_RESERVED0 (0x3FF<<22) +#define DMAE_COMMAND_RESERVED0_SHIFT 22 + u32 src_addr_lo; + u32 src_addr_hi; + u32 dst_addr_lo; + u32 dst_addr_hi; +#if defined(__BIG_ENDIAN) + u16 opcode_iov; +#define DMAE_COMMAND_SRC_VFID (0x3F<<0) +#define DMAE_COMMAND_SRC_VFID_SHIFT 0 +#define DMAE_COMMAND_SRC_VFPF (0x1<<6) +#define DMAE_COMMAND_SRC_VFPF_SHIFT 6 +#define DMAE_COMMAND_RESERVED1 (0x1<<7) +#define DMAE_COMMAND_RESERVED1_SHIFT 7 +#define DMAE_COMMAND_DST_VFID (0x3F<<8) +#define DMAE_COMMAND_DST_VFID_SHIFT 8 +#define DMAE_COMMAND_DST_VFPF (0x1<<14) +#define DMAE_COMMAND_DST_VFPF_SHIFT 14 +#define DMAE_COMMAND_RESERVED2 (0x1<<15) +#define DMAE_COMMAND_RESERVED2_SHIFT 15 + u16 len; +#elif defined(__LITTLE_ENDIAN) + u16 len; + u16 opcode_iov; +#define DMAE_COMMAND_SRC_VFID (0x3F<<0) +#define DMAE_COMMAND_SRC_VFID_SHIFT 0 +#define DMAE_COMMAND_SRC_VFPF (0x1<<6) +#define DMAE_COMMAND_SRC_VFPF_SHIFT 6 +#define DMAE_COMMAND_RESERVED1 (0x1<<7) +#define DMAE_COMMAND_RESERVED1_SHIFT 7 +#define DMAE_COMMAND_DST_VFID (0x3F<<8) +#define DMAE_COMMAND_DST_VFID_SHIFT 8 +#define DMAE_COMMAND_DST_VFPF (0x1<<14) +#define DMAE_COMMAND_DST_VFPF_SHIFT 14 +#define DMAE_COMMAND_RESERVED2 (0x1<<15) +#define DMAE_COMMAND_RESERVED2_SHIFT 15 +#endif + u32 comp_addr_lo; + u32 comp_addr_hi; + u32 comp_val; + u32 crc32; + u32 crc32_c; +#if defined(__BIG_ENDIAN) + u16 crc16_c; + u16 crc16; +#elif defined(__LITTLE_ENDIAN) + u16 crc16; + u16 crc16_c; +#endif +#if defined(__BIG_ENDIAN) + u16 reserved3; + u16 crc_t10; +#elif defined(__LITTLE_ENDIAN) + u16 crc_t10; + u16 reserved3; +#endif +#if defined(__BIG_ENDIAN) + u16 xsum8; + u16 xsum16; +#elif defined(__LITTLE_ENDIAN) + u16 xsum16; + u16 xsum8; +#endif +}; + + +/* + * common data for all protocols + */ +struct doorbell_hdr { + u8 header; +#define DOORBELL_HDR_RX (0x1<<0) +#define DOORBELL_HDR_RX_SHIFT 0 +#define DOORBELL_HDR_DB_TYPE (0x1<<1) +#define DOORBELL_HDR_DB_TYPE_SHIFT 1 +#define DOORBELL_HDR_DPM_SIZE (0x3<<2) +#define DOORBELL_HDR_DPM_SIZE_SHIFT 2 +#define DOORBELL_HDR_CONN_TYPE (0xF<<4) +#define DOORBELL_HDR_CONN_TYPE_SHIFT 4 +}; + +/* + * Ethernet doorbell + */ +struct eth_tx_doorbell { +#if defined(__BIG_ENDIAN) + u16 npackets; + u8 params; +#define ETH_TX_DOORBELL_NUM_BDS (0x3F<<0) +#define ETH_TX_DOORBELL_NUM_BDS_SHIFT 0 +#define ETH_TX_DOORBELL_RESERVED_TX_FIN_FLAG (0x1<<6) +#define ETH_TX_DOORBELL_RESERVED_TX_FIN_FLAG_SHIFT 6 +#define ETH_TX_DOORBELL_SPARE (0x1<<7) +#define ETH_TX_DOORBELL_SPARE_SHIFT 7 + struct doorbell_hdr hdr; +#elif defined(__LITTLE_ENDIAN) + struct doorbell_hdr hdr; + u8 params; +#define ETH_TX_DOORBELL_NUM_BDS (0x3F<<0) +#define ETH_TX_DOORBELL_NUM_BDS_SHIFT 0 +#define ETH_TX_DOORBELL_RESERVED_TX_FIN_FLAG (0x1<<6) +#define ETH_TX_DOORBELL_RESERVED_TX_FIN_FLAG_SHIFT 6 +#define ETH_TX_DOORBELL_SPARE (0x1<<7) +#define ETH_TX_DOORBELL_SPARE_SHIFT 7 + u16 npackets; +#endif +}; + + +/* + * 3 lines. status block + */ +struct hc_status_block_e1x { + __le16 index_values[HC_SB_MAX_INDICES_E1X]; + __le16 running_index[HC_SB_MAX_SM]; + __le32 rsrv[11]; +}; + +/* + * host status block + */ +struct host_hc_status_block_e1x { + struct hc_status_block_e1x sb; +}; + + +/* + * 3 lines. status block + */ +struct hc_status_block_e2 { + __le16 index_values[HC_SB_MAX_INDICES_E2]; + __le16 running_index[HC_SB_MAX_SM]; + __le32 reserved[11]; +}; + +/* + * host status block + */ +struct host_hc_status_block_e2 { + struct hc_status_block_e2 sb; +}; + + +/* + * 5 lines. slow-path status block + */ +struct hc_sp_status_block { + __le16 index_values[HC_SP_SB_MAX_INDICES]; + __le16 running_index; + __le16 rsrv; + u32 rsrv1; +}; + +/* + * host status block + */ +struct host_sp_status_block { + struct atten_sp_status_block atten_status_block; + struct hc_sp_status_block sp_sb; +}; + + +/* + * IGU driver acknowledgment register + */ +struct igu_ack_register { +#if defined(__BIG_ENDIAN) + u16 sb_id_and_flags; +#define IGU_ACK_REGISTER_STATUS_BLOCK_ID (0x1F<<0) +#define IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT 0 +#define IGU_ACK_REGISTER_STORM_ID (0x7<<5) +#define IGU_ACK_REGISTER_STORM_ID_SHIFT 5 +#define IGU_ACK_REGISTER_UPDATE_INDEX (0x1<<8) +#define IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT 8 +#define IGU_ACK_REGISTER_INTERRUPT_MODE (0x3<<9) +#define IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT 9 +#define IGU_ACK_REGISTER_RESERVED (0x1F<<11) +#define IGU_ACK_REGISTER_RESERVED_SHIFT 11 + u16 status_block_index; +#elif defined(__LITTLE_ENDIAN) + u16 status_block_index; + u16 sb_id_and_flags; +#define IGU_ACK_REGISTER_STATUS_BLOCK_ID (0x1F<<0) +#define IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT 0 +#define IGU_ACK_REGISTER_STORM_ID (0x7<<5) +#define IGU_ACK_REGISTER_STORM_ID_SHIFT 5 +#define IGU_ACK_REGISTER_UPDATE_INDEX (0x1<<8) +#define IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT 8 +#define IGU_ACK_REGISTER_INTERRUPT_MODE (0x3<<9) +#define IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT 9 +#define IGU_ACK_REGISTER_RESERVED (0x1F<<11) +#define IGU_ACK_REGISTER_RESERVED_SHIFT 11 +#endif +}; + + +/* + * IGU driver acknowledgement register + */ +struct igu_backward_compatible { + u32 sb_id_and_flags; +#define IGU_BACKWARD_COMPATIBLE_SB_INDEX (0xFFFF<<0) +#define IGU_BACKWARD_COMPATIBLE_SB_INDEX_SHIFT 0 +#define IGU_BACKWARD_COMPATIBLE_SB_SELECT (0x1F<<16) +#define IGU_BACKWARD_COMPATIBLE_SB_SELECT_SHIFT 16 +#define IGU_BACKWARD_COMPATIBLE_SEGMENT_ACCESS (0x7<<21) +#define IGU_BACKWARD_COMPATIBLE_SEGMENT_ACCESS_SHIFT 21 +#define IGU_BACKWARD_COMPATIBLE_BUPDATE (0x1<<24) +#define IGU_BACKWARD_COMPATIBLE_BUPDATE_SHIFT 24 +#define IGU_BACKWARD_COMPATIBLE_ENABLE_INT (0x3<<25) +#define IGU_BACKWARD_COMPATIBLE_ENABLE_INT_SHIFT 25 +#define IGU_BACKWARD_COMPATIBLE_RESERVED_0 (0x1F<<27) +#define IGU_BACKWARD_COMPATIBLE_RESERVED_0_SHIFT 27 + u32 reserved_2; +}; + + +/* + * IGU driver acknowledgement register + */ +struct igu_regular { + u32 sb_id_and_flags; +#define IGU_REGULAR_SB_INDEX (0xFFFFF<<0) +#define IGU_REGULAR_SB_INDEX_SHIFT 0 +#define IGU_REGULAR_RESERVED0 (0x1<<20) +#define IGU_REGULAR_RESERVED0_SHIFT 20 +#define IGU_REGULAR_SEGMENT_ACCESS (0x7<<21) +#define IGU_REGULAR_SEGMENT_ACCESS_SHIFT 21 +#define IGU_REGULAR_BUPDATE (0x1<<24) +#define IGU_REGULAR_BUPDATE_SHIFT 24 +#define IGU_REGULAR_ENABLE_INT (0x3<<25) +#define IGU_REGULAR_ENABLE_INT_SHIFT 25 +#define IGU_REGULAR_RESERVED_1 (0x1<<27) +#define IGU_REGULAR_RESERVED_1_SHIFT 27 +#define IGU_REGULAR_CLEANUP_TYPE (0x3<<28) +#define IGU_REGULAR_CLEANUP_TYPE_SHIFT 28 +#define IGU_REGULAR_CLEANUP_SET (0x1<<30) +#define IGU_REGULAR_CLEANUP_SET_SHIFT 30 +#define IGU_REGULAR_BCLEANUP (0x1<<31) +#define IGU_REGULAR_BCLEANUP_SHIFT 31 + u32 reserved_2; +}; + +/* + * IGU driver acknowledgement register + */ +union igu_consprod_reg { + struct igu_regular regular; + struct igu_backward_compatible backward_compatible; +}; + + +/* + * Igu control commands + */ +enum igu_ctrl_cmd { + IGU_CTRL_CMD_TYPE_RD, + IGU_CTRL_CMD_TYPE_WR, + MAX_IGU_CTRL_CMD +}; + + +/* + * Control register for the IGU command register + */ +struct igu_ctrl_reg { + u32 ctrl_data; +#define IGU_CTRL_REG_ADDRESS (0xFFF<<0) +#define IGU_CTRL_REG_ADDRESS_SHIFT 0 +#define IGU_CTRL_REG_FID (0x7F<<12) +#define IGU_CTRL_REG_FID_SHIFT 12 +#define IGU_CTRL_REG_RESERVED (0x1<<19) +#define IGU_CTRL_REG_RESERVED_SHIFT 19 +#define IGU_CTRL_REG_TYPE (0x1<<20) +#define IGU_CTRL_REG_TYPE_SHIFT 20 +#define IGU_CTRL_REG_UNUSED (0x7FF<<21) +#define IGU_CTRL_REG_UNUSED_SHIFT 21 +}; + + +/* + * Igu interrupt command + */ +enum igu_int_cmd { + IGU_INT_ENABLE, + IGU_INT_DISABLE, + IGU_INT_NOP, + IGU_INT_NOP2, + MAX_IGU_INT_CMD +}; + + +/* + * Igu segments + */ +enum igu_seg_access { + IGU_SEG_ACCESS_NORM, + IGU_SEG_ACCESS_DEF, + IGU_SEG_ACCESS_ATTN, + MAX_IGU_SEG_ACCESS +}; + + +/* + * Parser parsing flags field + */ +struct parsing_flags { + __le16 flags; +#define PARSING_FLAGS_ETHERNET_ADDRESS_TYPE (0x1<<0) +#define PARSING_FLAGS_ETHERNET_ADDRESS_TYPE_SHIFT 0 +#define PARSING_FLAGS_VLAN (0x1<<1) +#define PARSING_FLAGS_VLAN_SHIFT 1 +#define PARSING_FLAGS_EXTRA_VLAN (0x1<<2) +#define PARSING_FLAGS_EXTRA_VLAN_SHIFT 2 +#define PARSING_FLAGS_OVER_ETHERNET_PROTOCOL (0x3<<3) +#define PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT 3 +#define PARSING_FLAGS_IP_OPTIONS (0x1<<5) +#define PARSING_FLAGS_IP_OPTIONS_SHIFT 5 +#define PARSING_FLAGS_FRAGMENTATION_STATUS (0x1<<6) +#define PARSING_FLAGS_FRAGMENTATION_STATUS_SHIFT 6 +#define PARSING_FLAGS_OVER_IP_PROTOCOL (0x3<<7) +#define PARSING_FLAGS_OVER_IP_PROTOCOL_SHIFT 7 +#define PARSING_FLAGS_PURE_ACK_INDICATION (0x1<<9) +#define PARSING_FLAGS_PURE_ACK_INDICATION_SHIFT 9 +#define PARSING_FLAGS_TCP_OPTIONS_EXIST (0x1<<10) +#define PARSING_FLAGS_TCP_OPTIONS_EXIST_SHIFT 10 +#define PARSING_FLAGS_TIME_STAMP_EXIST_FLAG (0x1<<11) +#define PARSING_FLAGS_TIME_STAMP_EXIST_FLAG_SHIFT 11 +#define PARSING_FLAGS_CONNECTION_MATCH (0x1<<12) +#define PARSING_FLAGS_CONNECTION_MATCH_SHIFT 12 +#define PARSING_FLAGS_LLC_SNAP (0x1<<13) +#define PARSING_FLAGS_LLC_SNAP_SHIFT 13 +#define PARSING_FLAGS_RESERVED0 (0x3<<14) +#define PARSING_FLAGS_RESERVED0_SHIFT 14 +}; + + +/* + * Parsing flags for TCP ACK type + */ +enum prs_flags_ack_type { + PRS_FLAG_PUREACK_PIGGY, + PRS_FLAG_PUREACK_PURE, + MAX_PRS_FLAGS_ACK_TYPE +}; + + +/* + * Parsing flags for Ethernet address type + */ +enum prs_flags_eth_addr_type { + PRS_FLAG_ETHTYPE_NON_UNICAST, + PRS_FLAG_ETHTYPE_UNICAST, + MAX_PRS_FLAGS_ETH_ADDR_TYPE +}; + + +/* + * Parsing flags for over-ethernet protocol + */ +enum prs_flags_over_eth { + PRS_FLAG_OVERETH_UNKNOWN, + PRS_FLAG_OVERETH_IPV4, + PRS_FLAG_OVERETH_IPV6, + PRS_FLAG_OVERETH_LLCSNAP_UNKNOWN, + MAX_PRS_FLAGS_OVER_ETH +}; + + +/* + * Parsing flags for over-IP protocol + */ +enum prs_flags_over_ip { + PRS_FLAG_OVERIP_UNKNOWN, + PRS_FLAG_OVERIP_TCP, + PRS_FLAG_OVERIP_UDP, + MAX_PRS_FLAGS_OVER_IP +}; + + +/* + * SDM operation gen command (generate aggregative interrupt) + */ +struct sdm_op_gen { + __le32 command; +#define SDM_OP_GEN_COMP_PARAM (0x1F<<0) +#define SDM_OP_GEN_COMP_PARAM_SHIFT 0 +#define SDM_OP_GEN_COMP_TYPE (0x7<<5) +#define SDM_OP_GEN_COMP_TYPE_SHIFT 5 +#define SDM_OP_GEN_AGG_VECT_IDX (0xFF<<8) +#define SDM_OP_GEN_AGG_VECT_IDX_SHIFT 8 +#define SDM_OP_GEN_AGG_VECT_IDX_VALID (0x1<<16) +#define SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT 16 +#define SDM_OP_GEN_RESERVED (0x7FFF<<17) +#define SDM_OP_GEN_RESERVED_SHIFT 17 +}; + + +/* + * Timers connection context + */ +struct timers_block_context { + u32 __reserved_0; + u32 __reserved_1; + u32 __reserved_2; + u32 flags; +#define __TIMERS_BLOCK_CONTEXT_NUM_OF_ACTIVE_TIMERS (0x3<<0) +#define __TIMERS_BLOCK_CONTEXT_NUM_OF_ACTIVE_TIMERS_SHIFT 0 +#define TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG (0x1<<2) +#define TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG_SHIFT 2 +#define __TIMERS_BLOCK_CONTEXT_RESERVED0 (0x1FFFFFFF<<3) +#define __TIMERS_BLOCK_CONTEXT_RESERVED0_SHIFT 3 +}; + + +/* + * The eth aggregative context of Tstorm + */ +struct tstorm_eth_ag_context { + u32 __reserved0[14]; +}; + + +/* + * The eth aggregative context of Ustorm + */ +struct ustorm_eth_ag_context { + u32 __reserved0; +#if defined(__BIG_ENDIAN) + u8 cdu_usage; + u8 __reserved2; + u16 __reserved1; +#elif defined(__LITTLE_ENDIAN) + u16 __reserved1; + u8 __reserved2; + u8 cdu_usage; +#endif + u32 __reserved3[6]; +}; + + +/* + * The eth aggregative context of Xstorm + */ +struct xstorm_eth_ag_context { + u32 reserved0; +#if defined(__BIG_ENDIAN) + u8 cdu_reserved; + u8 reserved2; + u16 reserved1; +#elif defined(__LITTLE_ENDIAN) + u16 reserved1; + u8 reserved2; + u8 cdu_reserved; +#endif + u32 reserved3[30]; +}; + + +/* + * doorbell message sent to the chip + */ +struct doorbell { +#if defined(__BIG_ENDIAN) + u16 zero_fill2; + u8 zero_fill1; + struct doorbell_hdr header; +#elif defined(__LITTLE_ENDIAN) + struct doorbell_hdr header; + u8 zero_fill1; + u16 zero_fill2; +#endif +}; + + +/* + * doorbell message sent to the chip + */ +struct doorbell_set_prod { +#if defined(__BIG_ENDIAN) + u16 prod; + u8 zero_fill1; + struct doorbell_hdr header; +#elif defined(__LITTLE_ENDIAN) + struct doorbell_hdr header; + u8 zero_fill1; + u16 prod; +#endif +}; + + +struct regpair { + __le32 lo; + __le32 hi; +}; + +struct regpair_native { + u32 lo; + u32 hi; +}; + +/* + * Classify rule opcodes in E2/E3 + */ +enum classify_rule { + CLASSIFY_RULE_OPCODE_MAC, + CLASSIFY_RULE_OPCODE_VLAN, + CLASSIFY_RULE_OPCODE_PAIR, + CLASSIFY_RULE_OPCODE_IMAC_VNI, + MAX_CLASSIFY_RULE +}; + + +/* + * Classify rule types in E2/E3 + */ +enum classify_rule_action_type { + CLASSIFY_RULE_REMOVE, + CLASSIFY_RULE_ADD, + MAX_CLASSIFY_RULE_ACTION_TYPE +}; + + +/* + * client init ramrod data + */ +struct client_init_general_data { + u8 client_id; + u8 statistics_counter_id; + u8 statistics_en_flg; + u8 is_fcoe_flg; + u8 activate_flg; + u8 sp_client_id; + __le16 mtu; + u8 statistics_zero_flg; + u8 func_id; + u8 cos; + u8 traffic_type; + u8 fp_hsi_ver; + u8 reserved0[3]; +}; + + +/* + * client init rx data + */ +struct client_init_rx_data { + u8 tpa_en; +#define CLIENT_INIT_RX_DATA_TPA_EN_IPV4 (0x1<<0) +#define CLIENT_INIT_RX_DATA_TPA_EN_IPV4_SHIFT 0 +#define CLIENT_INIT_RX_DATA_TPA_EN_IPV6 (0x1<<1) +#define CLIENT_INIT_RX_DATA_TPA_EN_IPV6_SHIFT 1 +#define CLIENT_INIT_RX_DATA_TPA_MODE (0x1<<2) +#define CLIENT_INIT_RX_DATA_TPA_MODE_SHIFT 2 +#define CLIENT_INIT_RX_DATA_RESERVED5 (0x1F<<3) +#define CLIENT_INIT_RX_DATA_RESERVED5_SHIFT 3 + u8 vmqueue_mode_en_flg; + u8 extra_data_over_sgl_en_flg; + u8 cache_line_alignment_log_size; + u8 enable_dynamic_hc; + u8 max_sges_for_packet; + u8 client_qzone_id; + u8 drop_ip_cs_err_flg; + u8 drop_tcp_cs_err_flg; + u8 drop_ttl0_flg; + u8 drop_udp_cs_err_flg; + u8 inner_vlan_removal_enable_flg; + u8 outer_vlan_removal_enable_flg; + u8 status_block_id; + u8 rx_sb_index_number; + u8 dont_verify_rings_pause_thr_flg; + u8 max_tpa_queues; + u8 silent_vlan_removal_flg; + __le16 max_bytes_on_bd; + __le16 sge_buff_size; + u8 approx_mcast_engine_id; + u8 rss_engine_id; + struct regpair bd_page_base; + struct regpair sge_page_base; + struct regpair cqe_page_base; + u8 is_leading_rss; + u8 is_approx_mcast; + __le16 max_agg_size; + __le16 state; +#define CLIENT_INIT_RX_DATA_UCAST_DROP_ALL (0x1<<0) +#define CLIENT_INIT_RX_DATA_UCAST_DROP_ALL_SHIFT 0 +#define CLIENT_INIT_RX_DATA_UCAST_ACCEPT_ALL (0x1<<1) +#define CLIENT_INIT_RX_DATA_UCAST_ACCEPT_ALL_SHIFT 1 +#define CLIENT_INIT_RX_DATA_UCAST_ACCEPT_UNMATCHED (0x1<<2) +#define CLIENT_INIT_RX_DATA_UCAST_ACCEPT_UNMATCHED_SHIFT 2 +#define CLIENT_INIT_RX_DATA_MCAST_DROP_ALL (0x1<<3) +#define CLIENT_INIT_RX_DATA_MCAST_DROP_ALL_SHIFT 3 +#define CLIENT_INIT_RX_DATA_MCAST_ACCEPT_ALL (0x1<<4) +#define CLIENT_INIT_RX_DATA_MCAST_ACCEPT_ALL_SHIFT 4 +#define CLIENT_INIT_RX_DATA_BCAST_ACCEPT_ALL (0x1<<5) +#define CLIENT_INIT_RX_DATA_BCAST_ACCEPT_ALL_SHIFT 5 +#define CLIENT_INIT_RX_DATA_ACCEPT_ANY_VLAN (0x1<<6) +#define CLIENT_INIT_RX_DATA_ACCEPT_ANY_VLAN_SHIFT 6 +#define CLIENT_INIT_RX_DATA_RESERVED2 (0x1FF<<7) +#define CLIENT_INIT_RX_DATA_RESERVED2_SHIFT 7 + __le16 cqe_pause_thr_low; + __le16 cqe_pause_thr_high; + __le16 bd_pause_thr_low; + __le16 bd_pause_thr_high; + __le16 sge_pause_thr_low; + __le16 sge_pause_thr_high; + __le16 rx_cos_mask; + __le16 silent_vlan_value; + __le16 silent_vlan_mask; + u8 handle_ptp_pkts_flg; + u8 reserved6[3]; + __le32 reserved7; +}; + +/* + * client init tx data + */ +struct client_init_tx_data { + u8 enforce_security_flg; + u8 tx_status_block_id; + u8 tx_sb_index_number; + u8 tss_leading_client_id; + u8 tx_switching_flg; + u8 anti_spoofing_flg; + __le16 default_vlan; + struct regpair tx_bd_page_base; + __le16 state; +#define CLIENT_INIT_TX_DATA_UCAST_ACCEPT_ALL (0x1<<0) +#define CLIENT_INIT_TX_DATA_UCAST_ACCEPT_ALL_SHIFT 0 +#define CLIENT_INIT_TX_DATA_MCAST_ACCEPT_ALL (0x1<<1) +#define CLIENT_INIT_TX_DATA_MCAST_ACCEPT_ALL_SHIFT 1 +#define CLIENT_INIT_TX_DATA_BCAST_ACCEPT_ALL (0x1<<2) +#define CLIENT_INIT_TX_DATA_BCAST_ACCEPT_ALL_SHIFT 2 +#define CLIENT_INIT_TX_DATA_ACCEPT_ANY_VLAN (0x1<<3) +#define CLIENT_INIT_TX_DATA_ACCEPT_ANY_VLAN_SHIFT 3 +#define CLIENT_INIT_TX_DATA_RESERVED0 (0xFFF<<4) +#define CLIENT_INIT_TX_DATA_RESERVED0_SHIFT 4 + u8 default_vlan_flg; + u8 force_default_pri_flg; + u8 tunnel_lso_inc_ip_id; + u8 refuse_outband_vlan_flg; + u8 tunnel_non_lso_pcsum_location; + u8 tunnel_non_lso_outer_ip_csum_location; +}; + +/* + * client init ramrod data + */ +struct client_init_ramrod_data { + struct client_init_general_data general; + struct client_init_rx_data rx; + struct client_init_tx_data tx; +}; + + +/* + * client update ramrod data + */ +struct client_update_ramrod_data { + u8 client_id; + u8 func_id; + u8 inner_vlan_removal_enable_flg; + u8 inner_vlan_removal_change_flg; + u8 outer_vlan_removal_enable_flg; + u8 outer_vlan_removal_change_flg; + u8 anti_spoofing_enable_flg; + u8 anti_spoofing_change_flg; + u8 activate_flg; + u8 activate_change_flg; + __le16 default_vlan; + u8 default_vlan_enable_flg; + u8 default_vlan_change_flg; + __le16 silent_vlan_value; + __le16 silent_vlan_mask; + u8 silent_vlan_removal_flg; + u8 silent_vlan_change_flg; + u8 refuse_outband_vlan_flg; + u8 refuse_outband_vlan_change_flg; + u8 tx_switching_flg; + u8 tx_switching_change_flg; + u8 handle_ptp_pkts_flg; + u8 handle_ptp_pkts_change_flg; + __le16 reserved1; + __le32 echo; +}; + + +/* + * The eth storm context of Cstorm + */ +struct cstorm_eth_st_context { + u32 __reserved0[4]; +}; + + +struct double_regpair { + u32 regpair0_lo; + u32 regpair0_hi; + u32 regpair1_lo; + u32 regpair1_hi; +}; + +/* 2nd parse bd type used in ethernet tx BDs */ +enum eth_2nd_parse_bd_type { + ETH_2ND_PARSE_BD_TYPE_LSO_TUNNEL, + MAX_ETH_2ND_PARSE_BD_TYPE +}; + +/* + * Ethernet address typesm used in ethernet tx BDs + */ +enum eth_addr_type { + UNKNOWN_ADDRESS, + UNICAST_ADDRESS, + MULTICAST_ADDRESS, + BROADCAST_ADDRESS, + MAX_ETH_ADDR_TYPE +}; + + +/* + * + */ +struct eth_classify_cmd_header { + u8 cmd_general_data; +#define ETH_CLASSIFY_CMD_HEADER_RX_CMD (0x1<<0) +#define ETH_CLASSIFY_CMD_HEADER_RX_CMD_SHIFT 0 +#define ETH_CLASSIFY_CMD_HEADER_TX_CMD (0x1<<1) +#define ETH_CLASSIFY_CMD_HEADER_TX_CMD_SHIFT 1 +#define ETH_CLASSIFY_CMD_HEADER_OPCODE (0x3<<2) +#define ETH_CLASSIFY_CMD_HEADER_OPCODE_SHIFT 2 +#define ETH_CLASSIFY_CMD_HEADER_IS_ADD (0x1<<4) +#define ETH_CLASSIFY_CMD_HEADER_IS_ADD_SHIFT 4 +#define ETH_CLASSIFY_CMD_HEADER_RESERVED0 (0x7<<5) +#define ETH_CLASSIFY_CMD_HEADER_RESERVED0_SHIFT 5 + u8 func_id; + u8 client_id; + u8 reserved1; +}; + + +/* + * header for eth classification config ramrod + */ +struct eth_classify_header { + u8 rule_cnt; + u8 reserved0; + __le16 reserved1; + __le32 echo; +}; + +/* + * Command for adding/removing a Inner-MAC/VNI classification rule + */ +struct eth_classify_imac_vni_cmd { + struct eth_classify_cmd_header header; + __le32 vni; + __le16 imac_lsb; + __le16 imac_mid; + __le16 imac_msb; + __le16 reserved1; +}; + +/* + * Command for adding/removing a MAC classification rule + */ +struct eth_classify_mac_cmd { + struct eth_classify_cmd_header header; + __le16 reserved0; + __le16 inner_mac; + __le16 mac_lsb; + __le16 mac_mid; + __le16 mac_msb; + __le16 reserved1; +}; + + +/* + * Command for adding/removing a MAC-VLAN pair classification rule + */ +struct eth_classify_pair_cmd { + struct eth_classify_cmd_header header; + __le16 reserved0; + __le16 inner_mac; + __le16 mac_lsb; + __le16 mac_mid; + __le16 mac_msb; + __le16 vlan; +}; + + +/* + * Command for adding/removing a VLAN classification rule + */ +struct eth_classify_vlan_cmd { + struct eth_classify_cmd_header header; + __le32 reserved0; + __le32 reserved1; + __le16 reserved2; + __le16 vlan; +}; + +/* + * Command for adding/removing a VXLAN classification rule + */ + +/* + * union for eth classification rule + */ +union eth_classify_rule_cmd { + struct eth_classify_mac_cmd mac; + struct eth_classify_vlan_cmd vlan; + struct eth_classify_pair_cmd pair; + struct eth_classify_imac_vni_cmd imac_vni; +}; + +/* + * parameters for eth classification configuration ramrod + */ +struct eth_classify_rules_ramrod_data { + struct eth_classify_header header; + union eth_classify_rule_cmd rules[CLASSIFY_RULES_COUNT]; +}; + + +/* + * The data contain client ID need to the ramrod + */ +struct eth_common_ramrod_data { + __le32 client_id; + __le32 reserved1; +}; + + +/* + * The eth storm context of Ustorm + */ +struct ustorm_eth_st_context { + u32 reserved0[52]; +}; + +/* + * The eth storm context of Tstorm + */ +struct tstorm_eth_st_context { + u32 __reserved0[28]; +}; + +/* + * The eth storm context of Xstorm + */ +struct xstorm_eth_st_context { + u32 reserved0[60]; +}; + +/* + * Ethernet connection context + */ +struct eth_context { + struct ustorm_eth_st_context ustorm_st_context; + struct tstorm_eth_st_context tstorm_st_context; + struct xstorm_eth_ag_context xstorm_ag_context; + struct tstorm_eth_ag_context tstorm_ag_context; + struct cstorm_eth_ag_context cstorm_ag_context; + struct ustorm_eth_ag_context ustorm_ag_context; + struct timers_block_context timers_context; + struct xstorm_eth_st_context xstorm_st_context; + struct cstorm_eth_st_context cstorm_st_context; +}; + + +/* + * union for sgl and raw data. + */ +union eth_sgl_or_raw_data { + __le16 sgl[8]; + u32 raw_data[4]; +}; + +/* + * eth FP end aggregation CQE parameters struct + */ +struct eth_end_agg_rx_cqe { + u8 type_error_flags; +#define ETH_END_AGG_RX_CQE_TYPE (0x3<<0) +#define ETH_END_AGG_RX_CQE_TYPE_SHIFT 0 +#define ETH_END_AGG_RX_CQE_SGL_RAW_SEL (0x1<<2) +#define ETH_END_AGG_RX_CQE_SGL_RAW_SEL_SHIFT 2 +#define ETH_END_AGG_RX_CQE_RESERVED0 (0x1F<<3) +#define ETH_END_AGG_RX_CQE_RESERVED0_SHIFT 3 + u8 reserved1; + u8 queue_index; + u8 reserved2; + __le32 timestamp_delta; + __le16 num_of_coalesced_segs; + __le16 pkt_len; + u8 pure_ack_count; + u8 reserved3; + __le16 reserved4; + union eth_sgl_or_raw_data sgl_or_raw_data; + __le32 reserved5[8]; +}; + + +/* + * regular eth FP CQE parameters struct + */ +struct eth_fast_path_rx_cqe { + u8 type_error_flags; +#define ETH_FAST_PATH_RX_CQE_TYPE (0x3<<0) +#define ETH_FAST_PATH_RX_CQE_TYPE_SHIFT 0 +#define ETH_FAST_PATH_RX_CQE_SGL_RAW_SEL (0x1<<2) +#define ETH_FAST_PATH_RX_CQE_SGL_RAW_SEL_SHIFT 2 +#define ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG (0x1<<3) +#define ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG_SHIFT 3 +#define ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG (0x1<<4) +#define ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG_SHIFT 4 +#define ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG (0x1<<5) +#define ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG_SHIFT 5 +#define ETH_FAST_PATH_RX_CQE_PTP_PKT (0x1<<6) +#define ETH_FAST_PATH_RX_CQE_PTP_PKT_SHIFT 6 +#define ETH_FAST_PATH_RX_CQE_RESERVED0 (0x1<<7) +#define ETH_FAST_PATH_RX_CQE_RESERVED0_SHIFT 7 + u8 status_flags; +#define ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE (0x7<<0) +#define ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE_SHIFT 0 +#define ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG (0x1<<3) +#define ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG_SHIFT 3 +#define ETH_FAST_PATH_RX_CQE_BROADCAST_FLG (0x1<<4) +#define ETH_FAST_PATH_RX_CQE_BROADCAST_FLG_SHIFT 4 +#define ETH_FAST_PATH_RX_CQE_MAC_MATCH_FLG (0x1<<5) +#define ETH_FAST_PATH_RX_CQE_MAC_MATCH_FLG_SHIFT 5 +#define ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG (0x1<<6) +#define ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG_SHIFT 6 +#define ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG (0x1<<7) +#define ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG_SHIFT 7 + u8 queue_index; + u8 placement_offset; + __le32 rss_hash_result; + __le16 vlan_tag; + __le16 pkt_len_or_gro_seg_len; + __le16 len_on_bd; + struct parsing_flags pars_flags; + union eth_sgl_or_raw_data sgl_or_raw_data; + u8 tunn_type; + u8 tunn_inner_hdrs_offset; + __le16 reserved1; + __le32 tunn_tenant_id; + __le32 padding[5]; + u32 marker; +}; + + +/* + * Command for setting classification flags for a client + */ +struct eth_filter_rules_cmd { + u8 cmd_general_data; +#define ETH_FILTER_RULES_CMD_RX_CMD (0x1<<0) +#define ETH_FILTER_RULES_CMD_RX_CMD_SHIFT 0 +#define ETH_FILTER_RULES_CMD_TX_CMD (0x1<<1) +#define ETH_FILTER_RULES_CMD_TX_CMD_SHIFT 1 +#define ETH_FILTER_RULES_CMD_RESERVED0 (0x3F<<2) +#define ETH_FILTER_RULES_CMD_RESERVED0_SHIFT 2 + u8 func_id; + u8 client_id; + u8 reserved1; + __le16 state; +#define ETH_FILTER_RULES_CMD_UCAST_DROP_ALL (0x1<<0) +#define ETH_FILTER_RULES_CMD_UCAST_DROP_ALL_SHIFT 0 +#define ETH_FILTER_RULES_CMD_UCAST_ACCEPT_ALL (0x1<<1) +#define ETH_FILTER_RULES_CMD_UCAST_ACCEPT_ALL_SHIFT 1 +#define ETH_FILTER_RULES_CMD_UCAST_ACCEPT_UNMATCHED (0x1<<2) +#define ETH_FILTER_RULES_CMD_UCAST_ACCEPT_UNMATCHED_SHIFT 2 +#define ETH_FILTER_RULES_CMD_MCAST_DROP_ALL (0x1<<3) +#define ETH_FILTER_RULES_CMD_MCAST_DROP_ALL_SHIFT 3 +#define ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL (0x1<<4) +#define ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL_SHIFT 4 +#define ETH_FILTER_RULES_CMD_BCAST_ACCEPT_ALL (0x1<<5) +#define ETH_FILTER_RULES_CMD_BCAST_ACCEPT_ALL_SHIFT 5 +#define ETH_FILTER_RULES_CMD_ACCEPT_ANY_VLAN (0x1<<6) +#define ETH_FILTER_RULES_CMD_ACCEPT_ANY_VLAN_SHIFT 6 +#define ETH_FILTER_RULES_CMD_RESERVED2 (0x1FF<<7) +#define ETH_FILTER_RULES_CMD_RESERVED2_SHIFT 7 + __le16 reserved3; + struct regpair reserved4; +}; + + +/* + * parameters for eth classification filters ramrod + */ +struct eth_filter_rules_ramrod_data { + struct eth_classify_header header; + struct eth_filter_rules_cmd rules[FILTER_RULES_COUNT]; +}; + +/* Hsi version */ +enum eth_fp_hsi_ver { + ETH_FP_HSI_VER_0, + ETH_FP_HSI_VER_1, + ETH_FP_HSI_VER_2, + MAX_ETH_FP_HSI_VER +}; + +/* + * parameters for eth classification configuration ramrod + */ +struct eth_general_rules_ramrod_data { + struct eth_classify_header header; + union eth_classify_rule_cmd rules[CLASSIFY_RULES_COUNT]; +}; + + +/* + * The data for Halt ramrod + */ +struct eth_halt_ramrod_data { + __le32 client_id; + __le32 reserved0; +}; + + +/* + * destination and source mac address. + */ +struct eth_mac_addresses { +#if defined(__BIG_ENDIAN) + __le16 dst_mid; + __le16 dst_lo; +#elif defined(__LITTLE_ENDIAN) + __le16 dst_lo; + __le16 dst_mid; +#endif +#if defined(__BIG_ENDIAN) + __le16 src_lo; + __le16 dst_hi; +#elif defined(__LITTLE_ENDIAN) + __le16 dst_hi; + __le16 src_lo; +#endif +#if defined(__BIG_ENDIAN) + __le16 src_hi; + __le16 src_mid; +#elif defined(__LITTLE_ENDIAN) + __le16 src_mid; + __le16 src_hi; +#endif +}; + +/* tunneling related data */ +struct eth_tunnel_data { + __le16 dst_lo; + __le16 dst_mid; + __le16 dst_hi; + __le16 fw_ip_hdr_csum; + __le16 pseudo_csum; + u8 ip_hdr_start_inner_w; + u8 flags; +#define ETH_TUNNEL_DATA_IPV6_OUTER (0x1<<0) +#define ETH_TUNNEL_DATA_IPV6_OUTER_SHIFT 0 +#define ETH_TUNNEL_DATA_RESERVED (0x7F<<1) +#define ETH_TUNNEL_DATA_RESERVED_SHIFT 1 +}; + +/* union for mac addresses and for tunneling data. + * considered as tunneling data only if (tunnel_exist == 1). + */ +union eth_mac_addr_or_tunnel_data { + struct eth_mac_addresses mac_addr; + struct eth_tunnel_data tunnel_data; +}; + +/*Command for setting multicast classification for a client */ +struct eth_multicast_rules_cmd { + u8 cmd_general_data; +#define ETH_MULTICAST_RULES_CMD_RX_CMD (0x1<<0) +#define ETH_MULTICAST_RULES_CMD_RX_CMD_SHIFT 0 +#define ETH_MULTICAST_RULES_CMD_TX_CMD (0x1<<1) +#define ETH_MULTICAST_RULES_CMD_TX_CMD_SHIFT 1 +#define ETH_MULTICAST_RULES_CMD_IS_ADD (0x1<<2) +#define ETH_MULTICAST_RULES_CMD_IS_ADD_SHIFT 2 +#define ETH_MULTICAST_RULES_CMD_RESERVED0 (0x1F<<3) +#define ETH_MULTICAST_RULES_CMD_RESERVED0_SHIFT 3 + u8 func_id; + u8 bin_id; + u8 engine_id; + __le32 reserved2; + struct regpair reserved3; +}; + +/* + * parameters for multicast classification ramrod + */ +struct eth_multicast_rules_ramrod_data { + struct eth_classify_header header; + struct eth_multicast_rules_cmd rules[MULTICAST_RULES_COUNT]; +}; + +/* + * Place holder for ramrods protocol specific data + */ +struct ramrod_data { + __le32 data_lo; + __le32 data_hi; +}; + +/* + * union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits) + */ +union eth_ramrod_data { + struct ramrod_data general; +}; + + +/* + * RSS toeplitz hash type, as reported in CQE + */ +enum eth_rss_hash_type { + DEFAULT_HASH_TYPE, + IPV4_HASH_TYPE, + TCP_IPV4_HASH_TYPE, + IPV6_HASH_TYPE, + TCP_IPV6_HASH_TYPE, + VLAN_PRI_HASH_TYPE, + E1HOV_PRI_HASH_TYPE, + DSCP_HASH_TYPE, + MAX_ETH_RSS_HASH_TYPE +}; + + +/* + * Ethernet RSS mode + */ +enum eth_rss_mode { + ETH_RSS_MODE_DISABLED, + ETH_RSS_MODE_REGULAR, + ETH_RSS_MODE_VLAN_PRI, + ETH_RSS_MODE_E1HOV_PRI, + ETH_RSS_MODE_IP_DSCP, + MAX_ETH_RSS_MODE +}; + + +/* + * parameters for RSS update ramrod (E2) + */ +struct eth_rss_update_ramrod_data { + u8 rss_engine_id; + u8 rss_mode; + __le16 capabilities; +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_CAPABILITY (0x1<<0) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_CAPABILITY_SHIFT 0 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_TCP_CAPABILITY (0x1<<1) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_TCP_CAPABILITY_SHIFT 1 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_UDP_CAPABILITY (0x1<<2) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_UDP_CAPABILITY_SHIFT 2 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_VXLAN_CAPABILITY (0x1<<3) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV4_VXLAN_CAPABILITY_SHIFT 3 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_CAPABILITY (0x1<<4) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_CAPABILITY_SHIFT 4 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_TCP_CAPABILITY (0x1<<5) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_TCP_CAPABILITY_SHIFT 5 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY (0x1<<6) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY_SHIFT 6 +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY (0x1<<7) +#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY_SHIFT 7 +#define ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY (0x1<<8) +#define ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY_SHIFT 8 +#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY (0x1<<9) +#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY_SHIFT 9 +#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED (0x3F<<10) +#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED_SHIFT 10 + u8 rss_result_mask; + u8 reserved3; + __le16 reserved4; + u8 indirection_table[T_ETH_INDIRECTION_TABLE_SIZE]; + __le32 rss_key[T_ETH_RSS_KEY]; + __le32 echo; + __le32 reserved5; +}; + + +/* + * The eth Rx Buffer Descriptor + */ +struct eth_rx_bd { + __le32 addr_lo; + __le32 addr_hi; +}; + + +/* + * Eth Rx Cqe structure- general structure for ramrods + */ +struct common_ramrod_eth_rx_cqe { + u8 ramrod_type; +#define COMMON_RAMROD_ETH_RX_CQE_TYPE (0x3<<0) +#define COMMON_RAMROD_ETH_RX_CQE_TYPE_SHIFT 0 +#define COMMON_RAMROD_ETH_RX_CQE_ERROR (0x1<<2) +#define COMMON_RAMROD_ETH_RX_CQE_ERROR_SHIFT 2 +#define COMMON_RAMROD_ETH_RX_CQE_RESERVED0 (0x1F<<3) +#define COMMON_RAMROD_ETH_RX_CQE_RESERVED0_SHIFT 3 + u8 conn_type; + __le16 reserved1; + __le32 conn_and_cmd_data; +#define COMMON_RAMROD_ETH_RX_CQE_CID (0xFFFFFF<<0) +#define COMMON_RAMROD_ETH_RX_CQE_CID_SHIFT 0 +#define COMMON_RAMROD_ETH_RX_CQE_CMD_ID (0xFF<<24) +#define COMMON_RAMROD_ETH_RX_CQE_CMD_ID_SHIFT 24 + struct ramrod_data protocol_data; + __le32 echo; + __le32 reserved2[11]; +}; + +/* + * Rx Last CQE in page (in ETH) + */ +struct eth_rx_cqe_next_page { + __le32 addr_lo; + __le32 addr_hi; + __le32 reserved[14]; +}; + +/* + * union for all eth rx cqe types (fix their sizes) + */ +union eth_rx_cqe { + struct eth_fast_path_rx_cqe fast_path_cqe; + struct common_ramrod_eth_rx_cqe ramrod_cqe; + struct eth_rx_cqe_next_page next_page_cqe; + struct eth_end_agg_rx_cqe end_agg_cqe; +}; + + +/* + * Values for RX ETH CQE type field + */ +enum eth_rx_cqe_type { + RX_ETH_CQE_TYPE_ETH_FASTPATH, + RX_ETH_CQE_TYPE_ETH_RAMROD, + RX_ETH_CQE_TYPE_ETH_START_AGG, + RX_ETH_CQE_TYPE_ETH_STOP_AGG, + MAX_ETH_RX_CQE_TYPE +}; + + +/* + * Type of SGL/Raw field in ETH RX fast path CQE + */ +enum eth_rx_fp_sel { + ETH_FP_CQE_REGULAR, + ETH_FP_CQE_RAW, + MAX_ETH_RX_FP_SEL +}; + + +/* + * The eth Rx SGE Descriptor + */ +struct eth_rx_sge { + __le32 addr_lo; + __le32 addr_hi; +}; + + +/* + * common data for all protocols + */ +struct spe_hdr { + __le32 conn_and_cmd_data; +#define SPE_HDR_CID (0xFFFFFF<<0) +#define SPE_HDR_CID_SHIFT 0 +#define SPE_HDR_CMD_ID (0xFF<<24) +#define SPE_HDR_CMD_ID_SHIFT 24 + __le16 type; +#define SPE_HDR_CONN_TYPE (0xFF<<0) +#define SPE_HDR_CONN_TYPE_SHIFT 0 +#define SPE_HDR_FUNCTION_ID (0xFF<<8) +#define SPE_HDR_FUNCTION_ID_SHIFT 8 + __le16 reserved1; +}; + +/* + * specific data for ethernet slow path element + */ +union eth_specific_data { + u8 protocol_data[8]; + struct regpair client_update_ramrod_data; + struct regpair client_init_ramrod_init_data; + struct eth_halt_ramrod_data halt_ramrod_data; + struct regpair update_data_addr; + struct eth_common_ramrod_data common_ramrod_data; + struct regpair classify_cfg_addr; + struct regpair filter_cfg_addr; + struct regpair mcast_cfg_addr; +}; + +/* + * Ethernet slow path element + */ +struct eth_spe { + struct spe_hdr hdr; + union eth_specific_data data; +}; + + +/* + * Ethernet command ID for slow path elements + */ +enum eth_spqe_cmd_id { + RAMROD_CMD_ID_ETH_UNUSED, + RAMROD_CMD_ID_ETH_CLIENT_SETUP, + RAMROD_CMD_ID_ETH_HALT, + RAMROD_CMD_ID_ETH_FORWARD_SETUP, + RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP, + RAMROD_CMD_ID_ETH_CLIENT_UPDATE, + RAMROD_CMD_ID_ETH_EMPTY, + RAMROD_CMD_ID_ETH_TERMINATE, + RAMROD_CMD_ID_ETH_TPA_UPDATE, + RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES, + RAMROD_CMD_ID_ETH_FILTER_RULES, + RAMROD_CMD_ID_ETH_MULTICAST_RULES, + RAMROD_CMD_ID_ETH_RSS_UPDATE, + RAMROD_CMD_ID_ETH_SET_MAC, + MAX_ETH_SPQE_CMD_ID +}; + + +/* + * eth tpa update command + */ +enum eth_tpa_update_command { + TPA_UPDATE_NONE_COMMAND, + TPA_UPDATE_ENABLE_COMMAND, + TPA_UPDATE_DISABLE_COMMAND, + MAX_ETH_TPA_UPDATE_COMMAND +}; + +/* In case of LSO over IPv4 tunnel, whether to increment + * IP ID on external IP header or internal IP header + */ +enum eth_tunnel_lso_inc_ip_id { + EXT_HEADER, + INT_HEADER, + MAX_ETH_TUNNEL_LSO_INC_IP_ID +}; + +/* In case tunnel exist and L4 checksum offload, + * the pseudo checksum location, on packet or on BD. + */ +enum eth_tunnel_non_lso_csum_location { + CSUM_ON_PKT, + CSUM_ON_BD, + MAX_ETH_TUNNEL_NON_LSO_CSUM_LOCATION +}; + +enum eth_tunn_type { + TUNN_TYPE_NONE, + TUNN_TYPE_VXLAN, + TUNN_TYPE_L2_GRE, + TUNN_TYPE_IPV4_GRE, + TUNN_TYPE_IPV6_GRE, + TUNN_TYPE_L2_GENEVE, + TUNN_TYPE_IPV4_GENEVE, + TUNN_TYPE_IPV6_GENEVE, + MAX_ETH_TUNN_TYPE +}; + +/* + * Tx regular BD structure + */ +struct eth_tx_bd { + __le32 addr_lo; + __le32 addr_hi; + __le16 total_pkt_bytes; + __le16 nbytes; + u8 reserved[4]; +}; + + +/* + * structure for easy accessibility to assembler + */ +struct eth_tx_bd_flags { + u8 as_bitfield; +#define ETH_TX_BD_FLAGS_IP_CSUM (0x1<<0) +#define ETH_TX_BD_FLAGS_IP_CSUM_SHIFT 0 +#define ETH_TX_BD_FLAGS_L4_CSUM (0x1<<1) +#define ETH_TX_BD_FLAGS_L4_CSUM_SHIFT 1 +#define ETH_TX_BD_FLAGS_VLAN_MODE (0x3<<2) +#define ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT 2 +#define ETH_TX_BD_FLAGS_START_BD (0x1<<4) +#define ETH_TX_BD_FLAGS_START_BD_SHIFT 4 +#define ETH_TX_BD_FLAGS_IS_UDP (0x1<<5) +#define ETH_TX_BD_FLAGS_IS_UDP_SHIFT 5 +#define ETH_TX_BD_FLAGS_SW_LSO (0x1<<6) +#define ETH_TX_BD_FLAGS_SW_LSO_SHIFT 6 +#define ETH_TX_BD_FLAGS_IPV6 (0x1<<7) +#define ETH_TX_BD_FLAGS_IPV6_SHIFT 7 +}; + +/* + * The eth Tx Buffer Descriptor + */ +struct eth_tx_start_bd { + __le32 addr_lo; + __le32 addr_hi; + __le16 nbd; + __le16 nbytes; + __le16 vlan_or_ethertype; + struct eth_tx_bd_flags bd_flags; + u8 general_data; +#define ETH_TX_START_BD_HDR_NBDS (0x7<<0) +#define ETH_TX_START_BD_HDR_NBDS_SHIFT 0 +#define ETH_TX_START_BD_NO_ADDED_TAGS (0x1<<3) +#define ETH_TX_START_BD_NO_ADDED_TAGS_SHIFT 3 +#define ETH_TX_START_BD_FORCE_VLAN_MODE (0x1<<4) +#define ETH_TX_START_BD_FORCE_VLAN_MODE_SHIFT 4 +#define ETH_TX_START_BD_PARSE_NBDS (0x3<<5) +#define ETH_TX_START_BD_PARSE_NBDS_SHIFT 5 +#define ETH_TX_START_BD_TUNNEL_EXIST (0x1<<7) +#define ETH_TX_START_BD_TUNNEL_EXIST_SHIFT 7 +}; + +/* + * Tx parsing BD structure for ETH E1/E1h + */ +struct eth_tx_parse_bd_e1x { + __le16 global_data; +#define ETH_TX_PARSE_BD_E1X_IP_HDR_START_OFFSET_W (0xF<<0) +#define ETH_TX_PARSE_BD_E1X_IP_HDR_START_OFFSET_W_SHIFT 0 +#define ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE (0x3<<4) +#define ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE_SHIFT 4 +#define ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN (0x1<<6) +#define ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN_SHIFT 6 +#define ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN (0x1<<7) +#define ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT 7 +#define ETH_TX_PARSE_BD_E1X_NS_FLG (0x1<<8) +#define ETH_TX_PARSE_BD_E1X_NS_FLG_SHIFT 8 +#define ETH_TX_PARSE_BD_E1X_RESERVED0 (0x7F<<9) +#define ETH_TX_PARSE_BD_E1X_RESERVED0_SHIFT 9 + u8 tcp_flags; +#define ETH_TX_PARSE_BD_E1X_FIN_FLG (0x1<<0) +#define ETH_TX_PARSE_BD_E1X_FIN_FLG_SHIFT 0 +#define ETH_TX_PARSE_BD_E1X_SYN_FLG (0x1<<1) +#define ETH_TX_PARSE_BD_E1X_SYN_FLG_SHIFT 1 +#define ETH_TX_PARSE_BD_E1X_RST_FLG (0x1<<2) +#define ETH_TX_PARSE_BD_E1X_RST_FLG_SHIFT 2 +#define ETH_TX_PARSE_BD_E1X_PSH_FLG (0x1<<3) +#define ETH_TX_PARSE_BD_E1X_PSH_FLG_SHIFT 3 +#define ETH_TX_PARSE_BD_E1X_ACK_FLG (0x1<<4) +#define ETH_TX_PARSE_BD_E1X_ACK_FLG_SHIFT 4 +#define ETH_TX_PARSE_BD_E1X_URG_FLG (0x1<<5) +#define ETH_TX_PARSE_BD_E1X_URG_FLG_SHIFT 5 +#define ETH_TX_PARSE_BD_E1X_ECE_FLG (0x1<<6) +#define ETH_TX_PARSE_BD_E1X_ECE_FLG_SHIFT 6 +#define ETH_TX_PARSE_BD_E1X_CWR_FLG (0x1<<7) +#define ETH_TX_PARSE_BD_E1X_CWR_FLG_SHIFT 7 + u8 ip_hlen_w; + __le16 total_hlen_w; + __le16 tcp_pseudo_csum; + __le16 lso_mss; + __le16 ip_id; + __le32 tcp_send_seq; +}; + +/* + * Tx parsing BD structure for ETH E2 + */ +struct eth_tx_parse_bd_e2 { + union eth_mac_addr_or_tunnel_data data; + __le32 parsing_data; +#define ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W (0x7FF<<0) +#define ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W_SHIFT 0 +#define ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW (0xF<<11) +#define ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT 11 +#define ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR (0x1<<15) +#define ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR_SHIFT 15 +#define ETH_TX_PARSE_BD_E2_LSO_MSS (0x3FFF<<16) +#define ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT 16 +#define ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE (0x3<<30) +#define ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT 30 +}; + +/* + * Tx 2nd parsing BD structure for ETH packet + */ +struct eth_tx_parse_2nd_bd { + __le16 global_data; +#define ETH_TX_PARSE_2ND_BD_IP_HDR_START_OUTER_W (0xF<<0) +#define ETH_TX_PARSE_2ND_BD_IP_HDR_START_OUTER_W_SHIFT 0 +#define ETH_TX_PARSE_2ND_BD_RESERVED0 (0x1<<4) +#define ETH_TX_PARSE_2ND_BD_RESERVED0_SHIFT 4 +#define ETH_TX_PARSE_2ND_BD_LLC_SNAP_EN (0x1<<5) +#define ETH_TX_PARSE_2ND_BD_LLC_SNAP_EN_SHIFT 5 +#define ETH_TX_PARSE_2ND_BD_NS_FLG (0x1<<6) +#define ETH_TX_PARSE_2ND_BD_NS_FLG_SHIFT 6 +#define ETH_TX_PARSE_2ND_BD_TUNNEL_UDP_EXIST (0x1<<7) +#define ETH_TX_PARSE_2ND_BD_TUNNEL_UDP_EXIST_SHIFT 7 +#define ETH_TX_PARSE_2ND_BD_IP_HDR_LEN_OUTER_W (0x1F<<8) +#define ETH_TX_PARSE_2ND_BD_IP_HDR_LEN_OUTER_W_SHIFT 8 +#define ETH_TX_PARSE_2ND_BD_RESERVED1 (0x7<<13) +#define ETH_TX_PARSE_2ND_BD_RESERVED1_SHIFT 13 + u8 bd_type; +#define ETH_TX_PARSE_2ND_BD_TYPE (0xF<<0) +#define ETH_TX_PARSE_2ND_BD_TYPE_SHIFT 0 +#define ETH_TX_PARSE_2ND_BD_RESERVED2 (0xF<<4) +#define ETH_TX_PARSE_2ND_BD_RESERVED2_SHIFT 4 + u8 reserved3; + u8 tcp_flags; +#define ETH_TX_PARSE_2ND_BD_FIN_FLG (0x1<<0) +#define ETH_TX_PARSE_2ND_BD_FIN_FLG_SHIFT 0 +#define ETH_TX_PARSE_2ND_BD_SYN_FLG (0x1<<1) +#define ETH_TX_PARSE_2ND_BD_SYN_FLG_SHIFT 1 +#define ETH_TX_PARSE_2ND_BD_RST_FLG (0x1<<2) +#define ETH_TX_PARSE_2ND_BD_RST_FLG_SHIFT 2 +#define ETH_TX_PARSE_2ND_BD_PSH_FLG (0x1<<3) +#define ETH_TX_PARSE_2ND_BD_PSH_FLG_SHIFT 3 +#define ETH_TX_PARSE_2ND_BD_ACK_FLG (0x1<<4) +#define ETH_TX_PARSE_2ND_BD_ACK_FLG_SHIFT 4 +#define ETH_TX_PARSE_2ND_BD_URG_FLG (0x1<<5) +#define ETH_TX_PARSE_2ND_BD_URG_FLG_SHIFT 5 +#define ETH_TX_PARSE_2ND_BD_ECE_FLG (0x1<<6) +#define ETH_TX_PARSE_2ND_BD_ECE_FLG_SHIFT 6 +#define ETH_TX_PARSE_2ND_BD_CWR_FLG (0x1<<7) +#define ETH_TX_PARSE_2ND_BD_CWR_FLG_SHIFT 7 + u8 reserved4; + u8 tunnel_udp_hdr_start_w; + u8 fw_ip_hdr_to_payload_w; + __le16 fw_ip_csum_wo_len_flags_frag; + __le16 hw_ip_id; + __le32 tcp_send_seq; +}; + +/* The last BD in the BD memory will hold a pointer to the next BD memory */ +struct eth_tx_next_bd { + __le32 addr_lo; + __le32 addr_hi; + u8 reserved[8]; +}; + +/* + * union for 4 Bd types + */ +union eth_tx_bd_types { + struct eth_tx_start_bd start_bd; + struct eth_tx_bd reg_bd; + struct eth_tx_parse_bd_e1x parse_bd_e1x; + struct eth_tx_parse_bd_e2 parse_bd_e2; + struct eth_tx_parse_2nd_bd parse_2nd_bd; + struct eth_tx_next_bd next_bd; +}; + +/* + * array of 13 bds as appears in the eth xstorm context + */ +struct eth_tx_bds_array { + union eth_tx_bd_types bds[13]; +}; + + +/* + * VLAN mode on TX BDs + */ +enum eth_tx_vlan_type { + X_ETH_NO_VLAN, + X_ETH_OUTBAND_VLAN, + X_ETH_INBAND_VLAN, + X_ETH_FW_ADDED_VLAN, + MAX_ETH_TX_VLAN_TYPE +}; + + +/* + * Ethernet VLAN filtering mode in E1x + */ +enum eth_vlan_filter_mode { + ETH_VLAN_FILTER_ANY_VLAN, + ETH_VLAN_FILTER_SPECIFIC_VLAN, + ETH_VLAN_FILTER_CLASSIFY, + MAX_ETH_VLAN_FILTER_MODE +}; + + +/* + * MAC filtering configuration command header + */ +struct mac_configuration_hdr { + u8 length; + u8 offset; + __le16 client_id; + __le32 echo; +}; + +/* + * MAC address in list for ramrod + */ +struct mac_configuration_entry { + __le16 lsb_mac_addr; + __le16 middle_mac_addr; + __le16 msb_mac_addr; + __le16 vlan_id; + u8 pf_id; + u8 flags; +#define MAC_CONFIGURATION_ENTRY_ACTION_TYPE (0x1<<0) +#define MAC_CONFIGURATION_ENTRY_ACTION_TYPE_SHIFT 0 +#define MAC_CONFIGURATION_ENTRY_RDMA_MAC (0x1<<1) +#define MAC_CONFIGURATION_ENTRY_RDMA_MAC_SHIFT 1 +#define MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE (0x3<<2) +#define MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE_SHIFT 2 +#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL (0x1<<4) +#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL_SHIFT 4 +#define MAC_CONFIGURATION_ENTRY_BROADCAST (0x1<<5) +#define MAC_CONFIGURATION_ENTRY_BROADCAST_SHIFT 5 +#define MAC_CONFIGURATION_ENTRY_RESERVED1 (0x3<<6) +#define MAC_CONFIGURATION_ENTRY_RESERVED1_SHIFT 6 + __le16 reserved0; + __le32 clients_bit_vector; +}; + +/* + * MAC filtering configuration command + */ +struct mac_configuration_cmd { + struct mac_configuration_hdr hdr; + struct mac_configuration_entry config_table[64]; +}; + + +/* + * Set-MAC command type (in E1x) + */ +enum set_mac_action_type { + T_ETH_MAC_COMMAND_INVALIDATE, + T_ETH_MAC_COMMAND_SET, + MAX_SET_MAC_ACTION_TYPE +}; + + +/* + * Ethernet TPA Modes + */ +enum tpa_mode { + TPA_LRO, + TPA_GRO, + MAX_TPA_MODE}; + + +/* + * tpa update ramrod data + */ +struct tpa_update_ramrod_data { + u8 update_ipv4; + u8 update_ipv6; + u8 client_id; + u8 max_tpa_queues; + u8 max_sges_for_packet; + u8 complete_on_both_clients; + u8 dont_verify_rings_pause_thr_flg; + u8 tpa_mode; + __le16 sge_buff_size; + __le16 max_agg_size; + __le32 sge_page_base_lo; + __le32 sge_page_base_hi; + __le16 sge_pause_thr_low; + __le16 sge_pause_thr_high; +}; + + +/* + * approximate-match multicast filtering for E1H per function in Tstorm + */ +struct tstorm_eth_approximate_match_multicast_filtering { + u32 mcast_add_hash_bit_array[8]; +}; + + +/* + * Common configuration parameters per function in Tstorm + */ +struct tstorm_eth_function_common_config { + __le16 config_flags; +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY (0x1<<0) +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY_SHIFT 0 +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY (0x1<<1) +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY_SHIFT 1 +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY (0x1<<2) +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY_SHIFT 2 +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY (0x1<<3) +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY_SHIFT 3 +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE (0x7<<4) +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE_SHIFT 4 +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE (0x1<<7) +#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE_SHIFT 7 +#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0xFF<<8) +#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 8 + u8 rss_result_mask; + u8 reserved1; + __le16 vlan_id[2]; +}; + + +/* + * MAC filtering configuration parameters per port in Tstorm + */ +struct tstorm_eth_mac_filter_config { + u32 ucast_drop_all; + u32 ucast_accept_all; + u32 mcast_drop_all; + u32 mcast_accept_all; + u32 bcast_accept_all; + u32 vlan_filter[2]; + u32 unmatched_unicast; +}; + + +/* + * tx only queue init ramrod data + */ +struct tx_queue_init_ramrod_data { + struct client_init_general_data general; + struct client_init_tx_data tx; +}; + + +/* + * Three RX producers for ETH + */ +struct ustorm_eth_rx_producers { +#if defined(__BIG_ENDIAN) + u16 bd_prod; + u16 cqe_prod; +#elif defined(__LITTLE_ENDIAN) + u16 cqe_prod; + u16 bd_prod; +#endif +#if defined(__BIG_ENDIAN) + u16 reserved; + u16 sge_prod; +#elif defined(__LITTLE_ENDIAN) + u16 sge_prod; + u16 reserved; +#endif +}; + + +/* + * FCoE RX statistics parameters section#0 + */ +struct fcoe_rx_stat_params_section0 { + __le32 fcoe_rx_pkt_cnt; + __le32 fcoe_rx_byte_cnt; +}; + + +/* + * FCoE RX statistics parameters section#1 + */ +struct fcoe_rx_stat_params_section1 { + __le32 fcoe_ver_cnt; + __le32 fcoe_rx_drop_pkt_cnt; +}; + + +/* + * FCoE RX statistics parameters section#2 + */ +struct fcoe_rx_stat_params_section2 { + __le32 fc_crc_cnt; + __le32 eofa_del_cnt; + __le32 miss_frame_cnt; + __le32 seq_timeout_cnt; + __le32 drop_seq_cnt; + __le32 fcoe_rx_drop_pkt_cnt; + __le32 fcp_rx_pkt_cnt; + __le32 reserved0; +}; + + +/* + * FCoE TX statistics parameters + */ +struct fcoe_tx_stat_params { + __le32 fcoe_tx_pkt_cnt; + __le32 fcoe_tx_byte_cnt; + __le32 fcp_tx_pkt_cnt; + __le32 reserved0; +}; + +/* + * FCoE statistics parameters + */ +struct fcoe_statistics_params { + struct fcoe_tx_stat_params tx_stat; + struct fcoe_rx_stat_params_section0 rx_stat0; + struct fcoe_rx_stat_params_section1 rx_stat1; + struct fcoe_rx_stat_params_section2 rx_stat2; +}; + + +/* + * The data afex vif list ramrod need + */ +struct afex_vif_list_ramrod_data { + u8 afex_vif_list_command; + u8 func_bit_map; + __le16 vif_list_index; + u8 func_to_clear; + u8 echo; + __le16 reserved1; +}; + +struct c2s_pri_trans_table_entry { + u8 val[MAX_VLAN_PRIORITIES]; +}; + +/* + * cfc delete event data + */ +struct cfc_del_event_data { + __le32 cid; + __le32 reserved0; + __le32 reserved1; +}; + + +/* + * per-port SAFC demo variables + */ +struct cmng_flags_per_port { + u32 cmng_enables; +#define CMNG_FLAGS_PER_PORT_FAIRNESS_VN (0x1<<0) +#define CMNG_FLAGS_PER_PORT_FAIRNESS_VN_SHIFT 0 +#define CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN (0x1<<1) +#define CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN_SHIFT 1 +#define CMNG_FLAGS_PER_PORT_FAIRNESS_COS (0x1<<2) +#define CMNG_FLAGS_PER_PORT_FAIRNESS_COS_SHIFT 2 +#define CMNG_FLAGS_PER_PORT_FAIRNESS_COS_MODE (0x1<<3) +#define CMNG_FLAGS_PER_PORT_FAIRNESS_COS_MODE_SHIFT 3 +#define __CMNG_FLAGS_PER_PORT_RESERVED0 (0xFFFFFFF<<4) +#define __CMNG_FLAGS_PER_PORT_RESERVED0_SHIFT 4 + u32 __reserved1; +}; + + +/* + * per-port rate shaping variables + */ +struct rate_shaping_vars_per_port { + u32 rs_periodic_timeout; + u32 rs_threshold; +}; + +/* + * per-port fairness variables + */ +struct fairness_vars_per_port { + u32 upper_bound; + u32 fair_threshold; + u32 fairness_timeout; + u32 reserved0; +}; + +/* + * per-port SAFC variables + */ +struct safc_struct_per_port { +#if defined(__BIG_ENDIAN) + u16 __reserved1; + u8 __reserved0; + u8 safc_timeout_usec; +#elif defined(__LITTLE_ENDIAN) + u8 safc_timeout_usec; + u8 __reserved0; + u16 __reserved1; +#endif + u8 cos_to_traffic_types[MAX_COS_NUMBER]; + u16 cos_to_pause_mask[NUM_OF_SAFC_BITS]; +}; + +/* + * Per-port congestion management variables + */ +struct cmng_struct_per_port { + struct rate_shaping_vars_per_port rs_vars; + struct fairness_vars_per_port fair_vars; + struct safc_struct_per_port safc_vars; + struct cmng_flags_per_port flags; +}; + +/* + * a single rate shaping counter. can be used as protocol or vnic counter + */ +struct rate_shaping_counter { + u32 quota; +#if defined(__BIG_ENDIAN) + u16 __reserved0; + u16 rate; +#elif defined(__LITTLE_ENDIAN) + u16 rate; + u16 __reserved0; +#endif +}; + +/* + * per-vnic rate shaping variables + */ +struct rate_shaping_vars_per_vn { + struct rate_shaping_counter vn_counter; +}; + +/* + * per-vnic fairness variables + */ +struct fairness_vars_per_vn { + u32 cos_credit_delta[MAX_COS_NUMBER]; + u32 vn_credit_delta; + u32 __reserved0; +}; + +/* + * cmng port init state + */ +struct cmng_vnic { + struct rate_shaping_vars_per_vn vnic_max_rate[4]; + struct fairness_vars_per_vn vnic_min_rate[4]; +}; + +/* + * cmng port init state + */ +struct cmng_init { + struct cmng_struct_per_port port; + struct cmng_vnic vnic; +}; + + +/* + * driver parameters for congestion management init, all rates are in Mbps + */ +struct cmng_init_input { + u32 port_rate; + u16 vnic_min_rate[4]; + u16 vnic_max_rate[4]; + u16 cos_min_rate[MAX_COS_NUMBER]; + u16 cos_to_pause_mask[MAX_COS_NUMBER]; + struct cmng_flags_per_port flags; +}; + + +/* + * Protocol-common command ID for slow path elements + */ +enum common_spqe_cmd_id { + RAMROD_CMD_ID_COMMON_UNUSED, + RAMROD_CMD_ID_COMMON_FUNCTION_START, + RAMROD_CMD_ID_COMMON_FUNCTION_STOP, + RAMROD_CMD_ID_COMMON_FUNCTION_UPDATE, + RAMROD_CMD_ID_COMMON_CFC_DEL, + RAMROD_CMD_ID_COMMON_CFC_DEL_WB, + RAMROD_CMD_ID_COMMON_STAT_QUERY, + RAMROD_CMD_ID_COMMON_STOP_TRAFFIC, + RAMROD_CMD_ID_COMMON_START_TRAFFIC, + RAMROD_CMD_ID_COMMON_AFEX_VIF_LISTS, + RAMROD_CMD_ID_COMMON_SET_TIMESYNC, + MAX_COMMON_SPQE_CMD_ID +}; + +/* + * Per-protocol connection types + */ +enum connection_type { + ETH_CONNECTION_TYPE, + TOE_CONNECTION_TYPE, + RDMA_CONNECTION_TYPE, + ISCSI_CONNECTION_TYPE, + FCOE_CONNECTION_TYPE, + RESERVED_CONNECTION_TYPE_0, + RESERVED_CONNECTION_TYPE_1, + RESERVED_CONNECTION_TYPE_2, + NONE_CONNECTION_TYPE, + MAX_CONNECTION_TYPE +}; + + +/* + * Cos modes + */ +enum cos_mode { + OVERRIDE_COS, + STATIC_COS, + FW_WRR, + MAX_COS_MODE +}; + + +/* + * Dynamic HC counters set by the driver + */ +struct hc_dynamic_drv_counter { + u32 val[HC_SB_MAX_DYNAMIC_INDICES]; +}; + +/* + * zone A per-queue data + */ +struct cstorm_queue_zone_data { + struct hc_dynamic_drv_counter hc_dyn_drv_cnt; + struct regpair reserved[2]; +}; + + +/* + * Vf-PF channel data in cstorm ram (non-triggered zone) + */ +struct vf_pf_channel_zone_data { + u32 msg_addr_lo; + u32 msg_addr_hi; +}; + +/* + * zone for VF non-triggered data + */ +struct non_trigger_vf_zone { + struct vf_pf_channel_zone_data vf_pf_channel; +}; + +/* + * Vf-PF channel trigger zone in cstorm ram + */ +struct vf_pf_channel_zone_trigger { + u8 addr_valid; +}; + +/* + * zone that triggers the in-bound interrupt + */ +struct trigger_vf_zone { + struct vf_pf_channel_zone_trigger vf_pf_channel; + u8 reserved0; + u16 reserved1; + u32 reserved2; +}; + +/* + * zone B per-VF data + */ +struct cstorm_vf_zone_data { + struct non_trigger_vf_zone non_trigger; + struct trigger_vf_zone trigger; +}; + + +/* + * Dynamic host coalescing init parameters, per state machine + */ +struct dynamic_hc_sm_config { + u32 threshold[3]; + u8 shift_per_protocol[HC_SB_MAX_DYNAMIC_INDICES]; + u8 hc_timeout0[HC_SB_MAX_DYNAMIC_INDICES]; + u8 hc_timeout1[HC_SB_MAX_DYNAMIC_INDICES]; + u8 hc_timeout2[HC_SB_MAX_DYNAMIC_INDICES]; + u8 hc_timeout3[HC_SB_MAX_DYNAMIC_INDICES]; +}; + +/* + * Dynamic host coalescing init parameters + */ +struct dynamic_hc_config { + struct dynamic_hc_sm_config sm_config[HC_SB_MAX_SM]; +}; + + +struct e2_integ_data { +#if defined(__BIG_ENDIAN) + u8 flags; +#define E2_INTEG_DATA_TESTING_EN (0x1<<0) +#define E2_INTEG_DATA_TESTING_EN_SHIFT 0 +#define E2_INTEG_DATA_LB_TX (0x1<<1) +#define E2_INTEG_DATA_LB_TX_SHIFT 1 +#define E2_INTEG_DATA_COS_TX (0x1<<2) +#define E2_INTEG_DATA_COS_TX_SHIFT 2 +#define E2_INTEG_DATA_OPPORTUNISTICQM (0x1<<3) +#define E2_INTEG_DATA_OPPORTUNISTICQM_SHIFT 3 +#define E2_INTEG_DATA_DPMTESTRELEASEDQ (0x1<<4) +#define E2_INTEG_DATA_DPMTESTRELEASEDQ_SHIFT 4 +#define E2_INTEG_DATA_RESERVED (0x7<<5) +#define E2_INTEG_DATA_RESERVED_SHIFT 5 + u8 cos; + u8 voq; + u8 pbf_queue; +#elif defined(__LITTLE_ENDIAN) + u8 pbf_queue; + u8 voq; + u8 cos; + u8 flags; +#define E2_INTEG_DATA_TESTING_EN (0x1<<0) +#define E2_INTEG_DATA_TESTING_EN_SHIFT 0 +#define E2_INTEG_DATA_LB_TX (0x1<<1) +#define E2_INTEG_DATA_LB_TX_SHIFT 1 +#define E2_INTEG_DATA_COS_TX (0x1<<2) +#define E2_INTEG_DATA_COS_TX_SHIFT 2 +#define E2_INTEG_DATA_OPPORTUNISTICQM (0x1<<3) +#define E2_INTEG_DATA_OPPORTUNISTICQM_SHIFT 3 +#define E2_INTEG_DATA_DPMTESTRELEASEDQ (0x1<<4) +#define E2_INTEG_DATA_DPMTESTRELEASEDQ_SHIFT 4 +#define E2_INTEG_DATA_RESERVED (0x7<<5) +#define E2_INTEG_DATA_RESERVED_SHIFT 5 +#endif +#if defined(__BIG_ENDIAN) + u16 reserved3; + u8 reserved2; + u8 ramEn; +#elif defined(__LITTLE_ENDIAN) + u8 ramEn; + u8 reserved2; + u16 reserved3; +#endif +}; + + +/* + * set mac event data + */ +struct eth_event_data { + __le32 echo; + __le32 reserved0; + __le32 reserved1; +}; + + +/* + * pf-vf event data + */ +struct vf_pf_event_data { + u8 vf_id; + u8 reserved0; + __le16 reserved1; + __le32 msg_addr_lo; + __le32 msg_addr_hi; +}; + +/* + * VF FLR event data + */ +struct vf_flr_event_data { + u8 vf_id; + u8 reserved0; + __le16 reserved1; + __le32 reserved2; + __le32 reserved3; +}; + +/* + * malicious VF event data + */ +struct malicious_vf_event_data { + u8 vf_id; + u8 err_id; + __le16 reserved1; + __le32 reserved2; + __le32 reserved3; +}; + +/* + * vif list event data + */ +struct vif_list_event_data { + u8 func_bit_map; + u8 echo; + __le16 reserved0; + __le32 reserved1; + __le32 reserved2; +}; + +/* function update event data */ +struct function_update_event_data { + u8 echo; + u8 reserved; + __le16 reserved0; + __le32 reserved1; + __le32 reserved2; +}; + + +/* union for all event ring message types */ +union event_data { + struct vf_pf_event_data vf_pf_event; + struct eth_event_data eth_event; + struct cfc_del_event_data cfc_del_event; + struct vf_flr_event_data vf_flr_event; + struct malicious_vf_event_data malicious_vf_event; + struct vif_list_event_data vif_list_event; + struct function_update_event_data function_update_event; +}; + + +/* + * per PF event ring data + */ +struct event_ring_data { + struct regpair_native base_addr; +#if defined(__BIG_ENDIAN) + u8 index_id; + u8 sb_id; + u16 producer; +#elif defined(__LITTLE_ENDIAN) + u16 producer; + u8 sb_id; + u8 index_id; +#endif + u32 reserved0; +}; + + +/* + * event ring message element (each element is 128 bits) + */ +struct event_ring_msg { + u8 opcode; + u8 error; + u16 reserved1; + union event_data data; +}; + +/* + * event ring next page element (128 bits) + */ +struct event_ring_next { + struct regpair addr; + u32 reserved[2]; +}; + +/* + * union for event ring element types (each element is 128 bits) + */ +union event_ring_elem { + struct event_ring_msg message; + struct event_ring_next next_page; +}; + + +/* + * Common event ring opcodes + */ +enum event_ring_opcode { + EVENT_RING_OPCODE_VF_PF_CHANNEL, + EVENT_RING_OPCODE_FUNCTION_START, + EVENT_RING_OPCODE_FUNCTION_STOP, + EVENT_RING_OPCODE_CFC_DEL, + EVENT_RING_OPCODE_CFC_DEL_WB, + EVENT_RING_OPCODE_STAT_QUERY, + EVENT_RING_OPCODE_STOP_TRAFFIC, + EVENT_RING_OPCODE_START_TRAFFIC, + EVENT_RING_OPCODE_VF_FLR, + EVENT_RING_OPCODE_MALICIOUS_VF, + EVENT_RING_OPCODE_FORWARD_SETUP, + EVENT_RING_OPCODE_RSS_UPDATE_RULES, + EVENT_RING_OPCODE_FUNCTION_UPDATE, + EVENT_RING_OPCODE_AFEX_VIF_LISTS, + EVENT_RING_OPCODE_SET_MAC, + EVENT_RING_OPCODE_CLASSIFICATION_RULES, + EVENT_RING_OPCODE_FILTERS_RULES, + EVENT_RING_OPCODE_MULTICAST_RULES, + EVENT_RING_OPCODE_SET_TIMESYNC, + MAX_EVENT_RING_OPCODE +}; + +/* + * Modes for fairness algorithm + */ +enum fairness_mode { + FAIRNESS_COS_WRR_MODE, + FAIRNESS_COS_ETS_MODE, + MAX_FAIRNESS_MODE +}; + + +/* + * Priority and cos + */ +struct priority_cos { + u8 priority; + u8 cos; + __le16 reserved1; +}; + +/* + * The data for flow control configuration + */ +struct flow_control_configuration { + struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES]; + u8 dcb_enabled; + u8 dcb_version; + u8 dont_add_pri_0_en; + u8 reserved1; + __le32 reserved2; + u8 dcb_outer_pri[MAX_TRAFFIC_TYPES]; +}; + + +/* + * + */ +struct function_start_data { + u8 function_mode; + u8 allow_npar_tx_switching; + __le16 sd_vlan_tag; + __le16 vif_id; + u8 path_id; + u8 network_cos_mode; + u8 dmae_cmd_id; + u8 no_added_tags; + __le16 reserved0; + __le32 reserved1; + u8 inner_clss_vxlan; + u8 inner_clss_l2gre; + u8 inner_clss_l2geneve; + u8 inner_rss; + __le16 vxlan_dst_port; + __le16 geneve_dst_port; + u8 sd_accept_mf_clss_fail; + u8 sd_accept_mf_clss_fail_match_ethtype; + __le16 sd_accept_mf_clss_fail_ethtype; + __le16 sd_vlan_eth_type; + u8 sd_vlan_force_pri_flg; + u8 sd_vlan_force_pri_val; + u8 c2s_pri_tt_valid; + u8 c2s_pri_default; + u8 reserved2[6]; + struct c2s_pri_trans_table_entry c2s_pri_trans_table; +}; + +struct function_update_data { + u8 vif_id_change_flg; + u8 afex_default_vlan_change_flg; + u8 allowed_priorities_change_flg; + u8 network_cos_mode_change_flg; + __le16 vif_id; + __le16 afex_default_vlan; + u8 allowed_priorities; + u8 network_cos_mode; + u8 lb_mode_en_change_flg; + u8 lb_mode_en; + u8 tx_switch_suspend_change_flg; + u8 tx_switch_suspend; + u8 echo; + u8 update_tunn_cfg_flg; + u8 inner_clss_vxlan; + u8 inner_clss_l2gre; + u8 inner_clss_l2geneve; + u8 inner_rss; + __le16 vxlan_dst_port; + __le16 geneve_dst_port; + u8 sd_vlan_force_pri_change_flg; + u8 sd_vlan_force_pri_flg; + u8 sd_vlan_force_pri_val; + u8 sd_vlan_tag_change_flg; + u8 sd_vlan_eth_type_change_flg; + u8 reserved1; + __le16 sd_vlan_tag; + __le16 sd_vlan_eth_type; + __le16 reserved0; + __le32 reserved2; +}; + +/* + * FW version stored in the Xstorm RAM + */ +struct fw_version { +#if defined(__BIG_ENDIAN) + u8 engineering; + u8 revision; + u8 minor; + u8 major; +#elif defined(__LITTLE_ENDIAN) + u8 major; + u8 minor; + u8 revision; + u8 engineering; +#endif + u32 flags; +#define FW_VERSION_OPTIMIZED (0x1<<0) +#define FW_VERSION_OPTIMIZED_SHIFT 0 +#define FW_VERSION_BIG_ENDIEN (0x1<<1) +#define FW_VERSION_BIG_ENDIEN_SHIFT 1 +#define FW_VERSION_CHIP_VERSION (0x3<<2) +#define FW_VERSION_CHIP_VERSION_SHIFT 2 +#define __FW_VERSION_RESERVED (0xFFFFFFF<<4) +#define __FW_VERSION_RESERVED_SHIFT 4 +}; + +/* + * Dynamic Host-Coalescing - Driver(host) counters + */ +struct hc_dynamic_sb_drv_counters { + u32 dynamic_hc_drv_counter[HC_SB_MAX_DYNAMIC_INDICES]; +}; + + +/* + * 2 bytes. configuration/state parameters for a single protocol index + */ +struct hc_index_data { +#if defined(__BIG_ENDIAN) + u8 flags; +#define HC_INDEX_DATA_SM_ID (0x1<<0) +#define HC_INDEX_DATA_SM_ID_SHIFT 0 +#define HC_INDEX_DATA_HC_ENABLED (0x1<<1) +#define HC_INDEX_DATA_HC_ENABLED_SHIFT 1 +#define HC_INDEX_DATA_DYNAMIC_HC_ENABLED (0x1<<2) +#define HC_INDEX_DATA_DYNAMIC_HC_ENABLED_SHIFT 2 +#define HC_INDEX_DATA_RESERVE (0x1F<<3) +#define HC_INDEX_DATA_RESERVE_SHIFT 3 + u8 timeout; +#elif defined(__LITTLE_ENDIAN) + u8 timeout; + u8 flags; +#define HC_INDEX_DATA_SM_ID (0x1<<0) +#define HC_INDEX_DATA_SM_ID_SHIFT 0 +#define HC_INDEX_DATA_HC_ENABLED (0x1<<1) +#define HC_INDEX_DATA_HC_ENABLED_SHIFT 1 +#define HC_INDEX_DATA_DYNAMIC_HC_ENABLED (0x1<<2) +#define HC_INDEX_DATA_DYNAMIC_HC_ENABLED_SHIFT 2 +#define HC_INDEX_DATA_RESERVE (0x1F<<3) +#define HC_INDEX_DATA_RESERVE_SHIFT 3 +#endif +}; + + +/* + * HC state-machine + */ +struct hc_status_block_sm { +#if defined(__BIG_ENDIAN) + u8 igu_seg_id; + u8 igu_sb_id; + u8 timer_value; + u8 __flags; +#elif defined(__LITTLE_ENDIAN) + u8 __flags; + u8 timer_value; + u8 igu_sb_id; + u8 igu_seg_id; +#endif + u32 time_to_expire; +}; + +/* + * hold PCI identification variables- used in various places in firmware + */ +struct pci_entity { +#if defined(__BIG_ENDIAN) + u8 vf_valid; + u8 vf_id; + u8 vnic_id; + u8 pf_id; +#elif defined(__LITTLE_ENDIAN) + u8 pf_id; + u8 vnic_id; + u8 vf_id; + u8 vf_valid; +#endif +}; + +/* + * The fast-path status block meta-data, common to all chips + */ +struct hc_sb_data { + struct regpair_native host_sb_addr; + struct hc_status_block_sm state_machine[HC_SB_MAX_SM]; + struct pci_entity p_func; +#if defined(__BIG_ENDIAN) + u8 rsrv0; + u8 state; + u8 dhc_qzone_id; + u8 same_igu_sb_1b; +#elif defined(__LITTLE_ENDIAN) + u8 same_igu_sb_1b; + u8 dhc_qzone_id; + u8 state; + u8 rsrv0; +#endif + struct regpair_native rsrv1[2]; +}; + + +/* + * Segment types for host coaslescing + */ +enum hc_segment { + HC_REGULAR_SEGMENT, + HC_DEFAULT_SEGMENT, + MAX_HC_SEGMENT +}; + + +/* + * The fast-path status block meta-data + */ +struct hc_sp_status_block_data { + struct regpair_native host_sb_addr; +#if defined(__BIG_ENDIAN) + u8 rsrv1; + u8 state; + u8 igu_seg_id; + u8 igu_sb_id; +#elif defined(__LITTLE_ENDIAN) + u8 igu_sb_id; + u8 igu_seg_id; + u8 state; + u8 rsrv1; +#endif + struct pci_entity p_func; +}; + + +/* + * The fast-path status block meta-data + */ +struct hc_status_block_data_e1x { + struct hc_index_data index_data[HC_SB_MAX_INDICES_E1X]; + struct hc_sb_data common; +}; + + +/* + * The fast-path status block meta-data + */ +struct hc_status_block_data_e2 { + struct hc_index_data index_data[HC_SB_MAX_INDICES_E2]; + struct hc_sb_data common; +}; + + +/* + * IGU block operartion modes (in Everest2) + */ +enum igu_mode { + HC_IGU_BC_MODE, + HC_IGU_NBC_MODE, + MAX_IGU_MODE +}; + +/* + * Inner Headers Classification Type + */ +enum inner_clss_type { + INNER_CLSS_DISABLED, + INNER_CLSS_USE_VLAN, + INNER_CLSS_USE_VNI, + MAX_INNER_CLSS_TYPE}; + +/* + * IP versions + */ +enum ip_ver { + IP_V4, + IP_V6, + MAX_IP_VER +}; + +/* + * Malicious VF error ID + */ +enum malicious_vf_error_id { + MALICIOUS_VF_NO_ERROR, + VF_PF_CHANNEL_NOT_READY, + ETH_ILLEGAL_BD_LENGTHS, + ETH_PACKET_TOO_SHORT, + ETH_PAYLOAD_TOO_BIG, + ETH_ILLEGAL_ETH_TYPE, + ETH_ILLEGAL_LSO_HDR_LEN, + ETH_TOO_MANY_BDS, + ETH_ZERO_HDR_NBDS, + ETH_START_BD_NOT_SET, + ETH_ILLEGAL_PARSE_NBDS, + ETH_IPV6_AND_CHECKSUM, + ETH_VLAN_FLG_INCORRECT, + ETH_ILLEGAL_LSO_MSS, + ETH_TUNNEL_NOT_SUPPORTED, + MAX_MALICIOUS_VF_ERROR_ID +}; + +/* + * Multi-function modes + */ +enum mf_mode { + SINGLE_FUNCTION, + MULTI_FUNCTION_SD, + MULTI_FUNCTION_SI, + MULTI_FUNCTION_AFEX, + MAX_MF_MODE +}; + +/* + * Protocol-common statistics collected by the Tstorm (per pf) + */ +struct tstorm_per_pf_stats { + struct regpair rcv_error_bytes; +}; + +/* + * + */ +struct per_pf_stats { + struct tstorm_per_pf_stats tstorm_pf_statistics; +}; + + +/* + * Protocol-common statistics collected by the Tstorm (per port) + */ +struct tstorm_per_port_stats { + __le32 mac_discard; + __le32 mac_filter_discard; + __le32 brb_truncate_discard; + __le32 mf_tag_discard; + __le32 packet_drop; + __le32 reserved; +}; + +/* + * + */ +struct per_port_stats { + struct tstorm_per_port_stats tstorm_port_statistics; +}; + + +/* + * Protocol-common statistics collected by the Tstorm (per client) + */ +struct tstorm_per_queue_stats { + struct regpair rcv_ucast_bytes; + __le32 rcv_ucast_pkts; + __le32 checksum_discard; + struct regpair rcv_bcast_bytes; + __le32 rcv_bcast_pkts; + __le32 pkts_too_big_discard; + struct regpair rcv_mcast_bytes; + __le32 rcv_mcast_pkts; + __le32 ttl0_discard; + __le16 no_buff_discard; + __le16 reserved0; + __le32 reserved1; +}; + +/* + * Protocol-common statistics collected by the Ustorm (per client) + */ +struct ustorm_per_queue_stats { + struct regpair ucast_no_buff_bytes; + struct regpair mcast_no_buff_bytes; + struct regpair bcast_no_buff_bytes; + __le32 ucast_no_buff_pkts; + __le32 mcast_no_buff_pkts; + __le32 bcast_no_buff_pkts; + __le32 coalesced_pkts; + struct regpair coalesced_bytes; + __le32 coalesced_events; + __le32 coalesced_aborts; +}; + +/* + * Protocol-common statistics collected by the Xstorm (per client) + */ +struct xstorm_per_queue_stats { + struct regpair ucast_bytes_sent; + struct regpair mcast_bytes_sent; + struct regpair bcast_bytes_sent; + __le32 ucast_pkts_sent; + __le32 mcast_pkts_sent; + __le32 bcast_pkts_sent; + __le32 error_drop_pkts; +}; + +/* + * + */ +struct per_queue_stats { + struct tstorm_per_queue_stats tstorm_queue_statistics; + struct ustorm_per_queue_stats ustorm_queue_statistics; + struct xstorm_per_queue_stats xstorm_queue_statistics; +}; + + +/* + * FW version stored in first line of pram + */ +struct pram_fw_version { + u8 major; + u8 minor; + u8 revision; + u8 engineering; + u8 flags; +#define PRAM_FW_VERSION_OPTIMIZED (0x1<<0) +#define PRAM_FW_VERSION_OPTIMIZED_SHIFT 0 +#define PRAM_FW_VERSION_STORM_ID (0x3<<1) +#define PRAM_FW_VERSION_STORM_ID_SHIFT 1 +#define PRAM_FW_VERSION_BIG_ENDIEN (0x1<<3) +#define PRAM_FW_VERSION_BIG_ENDIEN_SHIFT 3 +#define PRAM_FW_VERSION_CHIP_VERSION (0x3<<4) +#define PRAM_FW_VERSION_CHIP_VERSION_SHIFT 4 +#define __PRAM_FW_VERSION_RESERVED0 (0x3<<6) +#define __PRAM_FW_VERSION_RESERVED0_SHIFT 6 +}; + + +/* + * Ethernet slow path element + */ +union protocol_common_specific_data { + u8 protocol_data[8]; + struct regpair phy_address; + struct regpair mac_config_addr; + struct afex_vif_list_ramrod_data afex_vif_list_data; +}; + +/* + * The send queue element + */ +struct protocol_common_spe { + struct spe_hdr hdr; + union protocol_common_specific_data data; +}; + +/* The data for the Set Timesync Ramrod */ +struct set_timesync_ramrod_data { + u8 drift_adjust_cmd; + u8 offset_cmd; + u8 add_sub_drift_adjust_value; + u8 drift_adjust_value; + u32 drift_adjust_period; + struct regpair offset_delta; +}; + +/* + * The send queue element + */ +struct slow_path_element { + struct spe_hdr hdr; + struct regpair protocol_data; +}; + + +/* + * Protocol-common statistics counter + */ +struct stats_counter { + __le16 xstats_counter; + __le16 reserved0; + __le32 reserved1; + __le16 tstats_counter; + __le16 reserved2; + __le32 reserved3; + __le16 ustats_counter; + __le16 reserved4; + __le32 reserved5; + __le16 cstats_counter; + __le16 reserved6; + __le32 reserved7; +}; + + +/* + * + */ +struct stats_query_entry { + u8 kind; + u8 index; + __le16 funcID; + __le32 reserved; + struct regpair address; +}; + +/* + * statistic command + */ +struct stats_query_cmd_group { + struct stats_query_entry query[STATS_QUERY_CMD_COUNT]; +}; + + +/* + * statistic command header + */ +struct stats_query_header { + u8 cmd_num; + u8 reserved0; + __le16 drv_stats_counter; + __le32 reserved1; + struct regpair stats_counters_addrs; +}; + + +/* + * Types of statistcis query entry + */ +enum stats_query_type { + STATS_TYPE_QUEUE, + STATS_TYPE_PORT, + STATS_TYPE_PF, + STATS_TYPE_TOE, + STATS_TYPE_FCOE, + MAX_STATS_QUERY_TYPE +}; + + +/* + * Indicate of the function status block state + */ +enum status_block_state { + SB_DISABLED, + SB_ENABLED, + SB_CLEANED, + MAX_STATUS_BLOCK_STATE +}; + + +/* + * Storm IDs (including attentions for IGU related enums) + */ +enum storm_id { + USTORM_ID, + CSTORM_ID, + XSTORM_ID, + TSTORM_ID, + ATTENTION_ID, + MAX_STORM_ID +}; + + +/* + * Taffic types used in ETS and flow control algorithms + */ +enum traffic_type { + LLFC_TRAFFIC_TYPE_NW, + LLFC_TRAFFIC_TYPE_FCOE, + LLFC_TRAFFIC_TYPE_ISCSI, + MAX_TRAFFIC_TYPE +}; + + +/* + * zone A per-queue data + */ +struct tstorm_queue_zone_data { + struct regpair reserved[4]; +}; + + +/* + * zone B per-VF data + */ +struct tstorm_vf_zone_data { + struct regpair reserved; +}; + +/* Add or Subtract Value for Set Timesync Ramrod */ +enum ts_add_sub_value { + TS_SUB_VALUE, + TS_ADD_VALUE, + MAX_TS_ADD_SUB_VALUE +}; + +/* Drift-Adjust Commands for Set Timesync Ramrod */ +enum ts_drift_adjust_cmd { + TS_DRIFT_ADJUST_KEEP, + TS_DRIFT_ADJUST_SET, + TS_DRIFT_ADJUST_RESET, + MAX_TS_DRIFT_ADJUST_CMD +}; + +/* Offset Commands for Set Timesync Ramrod */ +enum ts_offset_cmd { + TS_OFFSET_KEEP, + TS_OFFSET_INC, + TS_OFFSET_DEC, + MAX_TS_OFFSET_CMD +}; + + /* zone A per-queue data */ +struct ustorm_queue_zone_data { + struct ustorm_eth_rx_producers eth_rx_producers; + struct regpair reserved[3]; +}; + + +/* + * zone B per-VF data + */ +struct ustorm_vf_zone_data { + struct regpair reserved; +}; + + +/* + * data per VF-PF channel + */ +struct vf_pf_channel_data { +#if defined(__BIG_ENDIAN) + u16 reserved0; + u8 valid; + u8 state; +#elif defined(__LITTLE_ENDIAN) + u8 state; + u8 valid; + u16 reserved0; +#endif + u32 reserved1; +}; + + +/* + * State of VF-PF channel + */ +enum vf_pf_channel_state { + VF_PF_CHANNEL_STATE_READY, + VF_PF_CHANNEL_STATE_WAITING_FOR_ACK, + MAX_VF_PF_CHANNEL_STATE +}; + + +/* + * vif_list_rule_kind + */ +enum vif_list_rule_kind { + VIF_LIST_RULE_SET, + VIF_LIST_RULE_GET, + VIF_LIST_RULE_CLEAR_ALL, + VIF_LIST_RULE_CLEAR_FUNC, + MAX_VIF_LIST_RULE_KIND +}; + + +/* + * zone A per-queue data + */ +struct xstorm_queue_zone_data { + struct regpair reserved[4]; +}; + + +/* + * zone B per-VF data + */ +struct xstorm_vf_zone_data { + struct regpair reserved; +}; + +#endif /* BNX2X_HSI_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h new file mode 100644 index 000000000..46ee2c01f --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -0,0 +1,788 @@ +/* bnx2x_init.h: Qlogic Everest network driver. + * Structures and macroes needed during the initialization. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Modified by: Vladislav Zolotarov + */ + +#ifndef BNX2X_INIT_H +#define BNX2X_INIT_H + +/* Init operation types and structures */ +enum { + OP_RD = 0x1, /* read a single register */ + OP_WR, /* write a single register */ + OP_SW, /* copy a string to the device */ + OP_ZR, /* clear memory */ + OP_ZP, /* unzip then copy with DMAE */ + OP_WR_64, /* write 64 bit pattern */ + OP_WB, /* copy a string using DMAE */ + OP_WB_ZR, /* Clear a string using DMAE or indirect-wr */ + /* Skip the following ops if all of the init modes don't match */ + OP_IF_MODE_OR, + /* Skip the following ops if any of the init modes don't match */ + OP_IF_MODE_AND, + OP_MAX +}; + +enum { + STAGE_START, + STAGE_END, +}; + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + +/* structs for the various opcodes */ +struct raw_op { + u32 op:8; + u32 offset:24; + u32 raw_data; +}; + +struct op_read { + u32 op:8; + u32 offset:24; + u32 val; +}; + +struct op_write { + u32 op:8; + u32 offset:24; + u32 val; +}; + +struct op_arr_write { + u32 op:8; + u32 offset:24; +#ifdef __BIG_ENDIAN + u16 data_len; + u16 data_off; +#else /* __LITTLE_ENDIAN */ + u16 data_off; + u16 data_len; +#endif +}; + +struct op_zero { + u32 op:8; + u32 offset:24; + u32 len; +}; + +struct op_if_mode { + u32 op:8; + u32 cmd_offset:24; + u32 mode_bit_map; +}; + + +union init_op { + struct op_read read; + struct op_write write; + struct op_arr_write arr_wr; + struct op_zero zero; + struct raw_op raw; + struct op_if_mode if_mode; +}; + + +/* Init Phases */ +enum { + PHASE_COMMON, + PHASE_PORT0, + PHASE_PORT1, + PHASE_PF0, + PHASE_PF1, + PHASE_PF2, + PHASE_PF3, + PHASE_PF4, + PHASE_PF5, + PHASE_PF6, + PHASE_PF7, + NUM_OF_INIT_PHASES +}; + +/* Init Modes */ +enum { + MODE_ASIC = 0x00000001, + MODE_FPGA = 0x00000002, + MODE_EMUL = 0x00000004, + MODE_E2 = 0x00000008, + MODE_E3 = 0x00000010, + MODE_PORT2 = 0x00000020, + MODE_PORT4 = 0x00000040, + MODE_SF = 0x00000080, + MODE_MF = 0x00000100, + MODE_MF_SD = 0x00000200, + MODE_MF_SI = 0x00000400, + MODE_MF_AFEX = 0x00000800, + MODE_E3_A0 = 0x00001000, + MODE_E3_B0 = 0x00002000, + MODE_COS3 = 0x00004000, + MODE_COS6 = 0x00008000, + MODE_LITTLE_ENDIAN = 0x00010000, + MODE_BIG_ENDIAN = 0x00020000, +}; + +/* Init Blocks */ +enum { + BLOCK_ATC, + BLOCK_BRB1, + BLOCK_CCM, + BLOCK_CDU, + BLOCK_CFC, + BLOCK_CSDM, + BLOCK_CSEM, + BLOCK_DBG, + BLOCK_DMAE, + BLOCK_DORQ, + BLOCK_HC, + BLOCK_IGU, + BLOCK_MISC, + BLOCK_NIG, + BLOCK_PBF, + BLOCK_PGLUE_B, + BLOCK_PRS, + BLOCK_PXP2, + BLOCK_PXP, + BLOCK_QM, + BLOCK_SRC, + BLOCK_TCM, + BLOCK_TM, + BLOCK_TSDM, + BLOCK_TSEM, + BLOCK_UCM, + BLOCK_UPB, + BLOCK_USDM, + BLOCK_USEM, + BLOCK_XCM, + BLOCK_XPB, + BLOCK_XSDM, + BLOCK_XSEM, + BLOCK_MISC_AEU, + NUM_OF_INIT_BLOCKS +}; + +/* QM queue numbers */ +#define BNX2X_ETH_Q 0 +#define BNX2X_TOE_Q 3 +#define BNX2X_TOE_ACK_Q 6 +#define BNX2X_ISCSI_Q 9 +#define BNX2X_ISCSI_ACK_Q 11 +#define BNX2X_FCOE_Q 10 + +/* Vnics per mode */ +#define BNX2X_PORT2_MODE_NUM_VNICS 4 +#define BNX2X_PORT4_MODE_NUM_VNICS 2 + +/* COS offset for port1 in E3 B0 4port mode */ +#define BNX2X_E3B0_PORT1_COS_OFFSET 3 + +/* QM Register addresses */ +#define BNX2X_Q_VOQ_REG_ADDR(pf_q_num)\ + (QM_REG_QVOQIDX_0 + 4 * (pf_q_num)) +#define BNX2X_VOQ_Q_REG_ADDR(cos, pf_q_num)\ + (QM_REG_VOQQMASK_0_LSB + 4 * ((cos) * 2 + ((pf_q_num) >> 5))) +#define BNX2X_Q_CMDQ_REG_ADDR(pf_q_num)\ + (QM_REG_BYTECRDCMDQ_0 + 4 * ((pf_q_num) >> 4)) + +/* extracts the QM queue number for the specified port and vnic */ +#define BNX2X_PF_Q_NUM(q_num, port, vnic)\ + ((((port) << 1) | (vnic)) * 16 + (q_num)) + + +/* Maps the specified queue to the specified COS */ +static inline void bnx2x_map_q_cos(struct bnx2x *bp, u32 q_num, u32 new_cos) +{ + /* find current COS mapping */ + u32 curr_cos = REG_RD(bp, QM_REG_QVOQIDX_0 + q_num * 4); + + /* check if queue->COS mapping has changed */ + if (curr_cos != new_cos) { + u32 num_vnics = BNX2X_PORT2_MODE_NUM_VNICS; + u32 reg_addr, reg_bit_map, vnic; + + /* update parameters for 4port mode */ + if (INIT_MODE_FLAGS(bp) & MODE_PORT4) { + num_vnics = BNX2X_PORT4_MODE_NUM_VNICS; + if (BP_PORT(bp)) { + curr_cos += BNX2X_E3B0_PORT1_COS_OFFSET; + new_cos += BNX2X_E3B0_PORT1_COS_OFFSET; + } + } + + /* change queue mapping for each VNIC */ + for (vnic = 0; vnic < num_vnics; vnic++) { + u32 pf_q_num = + BNX2X_PF_Q_NUM(q_num, BP_PORT(bp), vnic); + u32 q_bit_map = 1 << (pf_q_num & 0x1f); + + /* overwrite queue->VOQ mapping */ + REG_WR(bp, BNX2X_Q_VOQ_REG_ADDR(pf_q_num), new_cos); + + /* clear queue bit from current COS bit map */ + reg_addr = BNX2X_VOQ_Q_REG_ADDR(curr_cos, pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + REG_WR(bp, reg_addr, reg_bit_map & (~q_bit_map)); + + /* set queue bit in new COS bit map */ + reg_addr = BNX2X_VOQ_Q_REG_ADDR(new_cos, pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + REG_WR(bp, reg_addr, reg_bit_map | q_bit_map); + + /* set/clear queue bit in command-queue bit map + * (E2/E3A0 only, valid COS values are 0/1) + */ + if (!(INIT_MODE_FLAGS(bp) & MODE_E3_B0)) { + reg_addr = BNX2X_Q_CMDQ_REG_ADDR(pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + q_bit_map = 1 << (2 * (pf_q_num & 0xf)); + reg_bit_map = new_cos ? + (reg_bit_map | q_bit_map) : + (reg_bit_map & (~q_bit_map)); + REG_WR(bp, reg_addr, reg_bit_map); + } + } + } +} + +/* Configures the QM according to the specified per-traffic-type COSes */ +static inline void bnx2x_dcb_config_qm(struct bnx2x *bp, enum cos_mode mode, + struct priority_cos *traffic_cos) +{ + bnx2x_map_q_cos(bp, BNX2X_FCOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_FCOE].cos); + bnx2x_map_q_cos(bp, BNX2X_ISCSI_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + bnx2x_map_q_cos(bp, BNX2X_ISCSI_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + if (mode != STATIC_COS) { + /* required only in backward compatible COS mode */ + bnx2x_map_q_cos(bp, BNX2X_ETH_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_TOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_TOE_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + } +} + + +/* congestion management port init api description + * the api works as follows: + * the driver should pass the cmng_init_input struct, the port_init function + * will prepare the required internal ram structure which will be passed back + * to the driver (cmng_init) that will write it into the internal ram. + * + * IMPORTANT REMARKS: + * 1. the cmng_init struct does not represent the contiguous internal ram + * structure. the driver should use the XSTORM_CMNG_PERPORT_VARS_OFFSET + * offset in order to write the port sub struct and the + * PFID_FROM_PORT_AND_VNIC offset for writing the vnic sub struct (in other + * words - don't use memcpy!). + * 2. although the cmng_init struct is filled for the maximal vnic number + * possible, the driver should only write the valid vnics into the internal + * ram according to the appropriate port mode. + */ +#define BITS_TO_BYTES(x) ((x)/8) + +/* CMNG constants, as derived from system spec calculations */ + +/* default MIN rate in case VNIC min rate is configured to zero- 100Mbps */ +#define DEF_MIN_RATE 100 + +/* resolution of the rate shaping timer - 400 usec */ +#define RS_PERIODIC_TIMEOUT_USEC 400 + +/* number of bytes in single QM arbitration cycle - + * coefficient for calculating the fairness timer + */ +#define QM_ARB_BYTES 160000 + +/* resolution of Min algorithm 1:100 */ +#define MIN_RES 100 + +/* how many bytes above threshold for + * the minimal credit of Min algorithm + */ +#define MIN_ABOVE_THRESH 32768 + +/* Fairness algorithm integration time coefficient - + * for calculating the actual Tfair + */ +#define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES) + +/* Memory of fairness algorithm - 2 cycles */ +#define FAIR_MEM 2 +#define SAFC_TIMEOUT_USEC 52 + +#define SDM_TICKS 4 + + +static inline void bnx2x_init_max(const struct cmng_init_input *input_data, + u32 r_param, struct cmng_init *ram_data) +{ + u32 vnic; + struct cmng_vnic *vdata = &ram_data->vnic; + struct cmng_struct_per_port *pdata = &ram_data->port; + /* rate shaping per-port variables + * 100 micro seconds in SDM ticks = 25 + * since each tick is 4 microSeconds + */ + + pdata->rs_vars.rs_periodic_timeout = + RS_PERIODIC_TIMEOUT_USEC / SDM_TICKS; + + /* this is the threshold below which no timer arming will occur. + * 1.25 coefficient is for the threshold to be a little bigger + * then the real time to compensate for timer in-accuracy + */ + pdata->rs_vars.rs_threshold = + (5 * RS_PERIODIC_TIMEOUT_USEC * r_param)/4; + + /* rate shaping per-vnic variables */ + for (vnic = 0; vnic < BNX2X_PORT2_MODE_NUM_VNICS; vnic++) { + /* global vnic counter */ + vdata->vnic_max_rate[vnic].vn_counter.rate = + input_data->vnic_max_rate[vnic]; + /* maximal Mbps for this vnic + * the quota in each timer period - number of bytes + * transmitted in this period + */ + vdata->vnic_max_rate[vnic].vn_counter.quota = + RS_PERIODIC_TIMEOUT_USEC * + (u32)vdata->vnic_max_rate[vnic].vn_counter.rate / 8; + } + +} + +static inline void bnx2x_init_min(const struct cmng_init_input *input_data, + u32 r_param, struct cmng_init *ram_data) +{ + u32 vnic, fair_periodic_timeout_usec, vnicWeightSum, tFair; + struct cmng_vnic *vdata = &ram_data->vnic; + struct cmng_struct_per_port *pdata = &ram_data->port; + + /* this is the resolution of the fairness timer */ + fair_periodic_timeout_usec = QM_ARB_BYTES / r_param; + + /* fairness per-port variables + * for 10G it is 1000usec. for 1G it is 10000usec. + */ + tFair = T_FAIR_COEF / input_data->port_rate; + + /* this is the threshold below which we won't arm the timer anymore */ + pdata->fair_vars.fair_threshold = QM_ARB_BYTES; + + /* we multiply by 1e3/8 to get bytes/msec. We don't want the credits + * to pass a credit of the T_FAIR*FAIR_MEM (algorithm resolution) + */ + pdata->fair_vars.upper_bound = r_param * tFair * FAIR_MEM; + + /* since each tick is 4 microSeconds */ + pdata->fair_vars.fairness_timeout = + fair_periodic_timeout_usec / SDM_TICKS; + + /* calculate sum of weights */ + vnicWeightSum = 0; + + for (vnic = 0; vnic < BNX2X_PORT2_MODE_NUM_VNICS; vnic++) + vnicWeightSum += input_data->vnic_min_rate[vnic]; + + /* global vnic counter */ + if (vnicWeightSum > 0) { + /* fairness per-vnic variables */ + for (vnic = 0; vnic < BNX2X_PORT2_MODE_NUM_VNICS; vnic++) { + /* this is the credit for each period of the fairness + * algorithm - number of bytes in T_FAIR (this vnic + * share of the port rate) + */ + vdata->vnic_min_rate[vnic].vn_credit_delta = + (u32)input_data->vnic_min_rate[vnic] * 100 * + (T_FAIR_COEF / (8 * 100 * vnicWeightSum)); + if (vdata->vnic_min_rate[vnic].vn_credit_delta < + pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH) { + vdata->vnic_min_rate[vnic].vn_credit_delta = + pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH; + } + } + } +} + +static inline void bnx2x_init_fw_wrr(const struct cmng_init_input *input_data, + u32 r_param, struct cmng_init *ram_data) +{ + u32 vnic, cos; + u32 cosWeightSum = 0; + struct cmng_vnic *vdata = &ram_data->vnic; + struct cmng_struct_per_port *pdata = &ram_data->port; + + for (cos = 0; cos < MAX_COS_NUMBER; cos++) + cosWeightSum += input_data->cos_min_rate[cos]; + + if (cosWeightSum > 0) { + + for (vnic = 0; vnic < BNX2X_PORT2_MODE_NUM_VNICS; vnic++) { + /* Since cos and vnic shouldn't work together the rate + * to divide between the coses is the port rate. + */ + u32 *ccd = vdata->vnic_min_rate[vnic].cos_credit_delta; + for (cos = 0; cos < MAX_COS_NUMBER; cos++) { + /* this is the credit for each period of + * the fairness algorithm - number of bytes + * in T_FAIR (this cos share of the vnic rate) + */ + ccd[cos] = + (u32)input_data->cos_min_rate[cos] * 100 * + (T_FAIR_COEF / (8 * 100 * cosWeightSum)); + if (ccd[cos] < pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH) { + ccd[cos] = + pdata->fair_vars.fair_threshold + + MIN_ABOVE_THRESH; + } + } + } + } +} + +static inline void bnx2x_init_safc(const struct cmng_init_input *input_data, + struct cmng_init *ram_data) +{ + /* in microSeconds */ + ram_data->port.safc_vars.safc_timeout_usec = SAFC_TIMEOUT_USEC; +} + +/* Congestion management port init */ +static inline void bnx2x_init_cmng(const struct cmng_init_input *input_data, + struct cmng_init *ram_data) +{ + u32 r_param; + memset(ram_data, 0, sizeof(struct cmng_init)); + + ram_data->port.flags = input_data->flags; + + /* number of bytes transmitted in a rate of 10Gbps + * in one usec = 1.25KB. + */ + r_param = BITS_TO_BYTES(input_data->port_rate); + bnx2x_init_max(input_data, r_param, ram_data); + bnx2x_init_min(input_data, r_param, ram_data); + bnx2x_init_fw_wrr(input_data, r_param, ram_data); + bnx2x_init_safc(input_data, ram_data); +} + + + +/* Returns the index of start or end of a specific block stage in ops array */ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + +#define INITOP_SET 0 /* set the HW directly */ +#define INITOP_CLEAR 1 /* clear the HW directly */ +#define INITOP_INIT 2 /* set the init-value array */ + +/**************************************************************************** +* ILT management +****************************************************************************/ +struct ilt_line { + dma_addr_t page_mapping; + void *page; + u32 size; +}; + +struct ilt_client_info { + u32 page_size; + u16 start; + u16 end; + u16 client_num; + u16 flags; +#define ILT_CLIENT_SKIP_INIT 0x1 +#define ILT_CLIENT_SKIP_MEM 0x2 +}; + +struct bnx2x_ilt { + u32 start_line; + struct ilt_line *lines; + struct ilt_client_info clients[4]; +#define ILT_CLIENT_CDU 0 +#define ILT_CLIENT_QM 1 +#define ILT_CLIENT_SRC 2 +#define ILT_CLIENT_TM 3 +}; + +/**************************************************************************** +* SRC configuration +****************************************************************************/ +struct src_ent { + u8 opaque[56]; + u64 next; +}; + +/**************************************************************************** +* Parity configuration +****************************************************************************/ +#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK, \ + block##_REG_##block##_PRTY_STS_CLR, \ + en_mask, {m1, m1h, m2, m3}, #block \ +} + +#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK_0, \ + block##_REG_##block##_PRTY_STS_CLR_0, \ + en_mask, {m1, m1h, m2, m3}, #block"_0" \ +} + +#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK_1, \ + block##_REG_##block##_PRTY_STS_CLR_1, \ + en_mask, {m1, m1h, m2, m3}, #block"_1" \ +} + +static const struct { + u32 mask_addr; + u32 sts_clr_addr; + u32 en_mask; /* Mask to enable parity attentions */ + struct { + u32 e1; /* 57710 */ + u32 e1h; /* 57711 */ + u32 e2; /* 57712 */ + u32 e3; /* 578xx */ + } reg_mask; /* Register mask (all valid bits) */ + char name[8]; /* Block's longest name is 7 characters long + * (name + suffix) + */ +} bnx2x_blocks_parity_data[] = { + /* bit 19 masked */ + /* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */ + /* bit 5,18,20-31 */ + /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */ + /* bit 5 */ + /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */ + /* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */ + /* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */ + + /* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't + * want to handle "system kill" flow at the moment. + */ + BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff, + 0x7ffffff), + BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(PXP2, 0x1ffffff, 0x7f, 0x7f, 0x7ff, 0x1ffffff), + BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0, 0), + BLOCK_PRTY_INFO(NIG, 0xffffffff, 0x3fffffff, 0xffffffff, 0, 0), + BLOCK_PRTY_INFO_0(NIG, 0xffffffff, 0, 0, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(NIG, 0xffff, 0, 0, 0xff, 0xffff), + BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1, 0x1), + BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff, 0xfff), + BLOCK_PRTY_INFO(ATC, 0x1f, 0, 0, 0x1f, 0x1f), + BLOCK_PRTY_INFO(PGLUE_B, 0x3, 0, 0, 0x3, 0x3), + BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3, 0x3), + {GRCBASE_UPB + PB_REG_PB_PRTY_MASK, + GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf, + {0xf, 0xf, 0xf, 0xf}, "UPB"}, + {GRCBASE_XPB + PB_REG_PB_PRTY_MASK, + GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0, + {0xf, 0xf, 0xf, 0xf}, "XPB"}, + BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7, 0x7), + BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf, 0x3f), + BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1, 0x1), + BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf, 0xf), + BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf, 0xf), + BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff, 0xff), + BLOCK_PRTY_INFO(PBF, 0, 0, 0x3ffff, 0xfffff, 0xfffffff), + BLOCK_PRTY_INFO(TM, 0, 0, 0x7f, 0x7f, 0x7f), + BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(TCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(CCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(UCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(XCM, 0, 0, 0x3fffffff, 0x3fffffff, 0x3fffffff), + BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f, 0x3f), + BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f, 0x3f), +}; + + +/* [28] MCP Latched rom_parity + * [29] MCP Latched ump_rx_parity + * [30] MCP Latched ump_tx_parity + * [31] MCP Latched scpad_parity + */ +#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS \ + (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY) + +#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ + (MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) + +/* Below registers control the MCP parity attention output. When + * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are + * enabled, when cleared - disabled. + */ +static const struct { + u32 addr; + u32 bits; +} mcp_attn_ctl_regs[] = { + { MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS } +}; + +static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) +{ + int i; + u32 reg_val; + + for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) { + reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr); + + if (enable) + reg_val |= mcp_attn_ctl_regs[i].bits; + else + reg_val &= ~mcp_attn_ctl_regs[i].bits; + + REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val); + } +} + +static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx) +{ + if (CHIP_IS_E1(bp)) + return bnx2x_blocks_parity_data[idx].reg_mask.e1; + else if (CHIP_IS_E1H(bp)) + return bnx2x_blocks_parity_data[idx].reg_mask.e1h; + else if (CHIP_IS_E2(bp)) + return bnx2x_blocks_parity_data[idx].reg_mask.e2; + else /* CHIP_IS_E3 */ + return bnx2x_blocks_parity_data[idx].reg_mask.e3; +} + +static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) { + u32 dis_mask = bnx2x_parity_reg_mask(bp, i); + + if (dis_mask) { + REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr, + dis_mask); + DP(NETIF_MSG_HW, "Setting parity mask " + "for %s to\t\t0x%x\n", + bnx2x_blocks_parity_data[i].name, dis_mask); + } + } + + /* Disable MCP parity attentions */ + bnx2x_set_mcp_parity(bp, false); +} + +/* Clear the parity error status registers. */ +static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp) +{ + int i; + u32 reg_val, mcp_aeu_bits = + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY; + + /* Clear SEM_FAST parities */ + REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + + for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) { + u32 reg_mask = bnx2x_parity_reg_mask(bp, i); + + if (reg_mask) { + reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i]. + sts_clr_addr); + if (reg_val & reg_mask) + DP(NETIF_MSG_HW, + "Parity errors in %s: 0x%x\n", + bnx2x_blocks_parity_data[i].name, + reg_val & reg_mask); + } + } + + /* Check if there were parity attentions in MCP */ + reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP); + if (reg_val & mcp_aeu_bits) + DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n", + reg_val & mcp_aeu_bits); + + /* Clear parity attentions in MCP: + * [7] clears Latched rom_parity + * [8] clears Latched ump_rx_parity + * [9] clears Latched ump_tx_parity + * [10] clears Latched scpad_parity (both ports) + */ + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780); +} + +static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) { + u32 reg_mask = bnx2x_parity_reg_mask(bp, i); + + if (reg_mask) + REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr, + bnx2x_blocks_parity_data[i].en_mask & reg_mask); + } + + /* Enable MCP parity attentions */ + bnx2x_set_mcp_parity(bp, true); +} + + +#endif /* BNX2X_INIT_H */ + diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h new file mode 100644 index 000000000..fc7fce642 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h @@ -0,0 +1,938 @@ +/* bnx2x_init_ops.h: Qlogic Everest network driver. + * Static functions needed during the initialization. + * This file is "included" in bnx2x_main.c. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Vladislav Zolotarov + */ + +#ifndef BNX2X_INIT_OPS_H +#define BNX2X_INIT_OPS_H + + +#ifndef BP_ILT +#define BP_ILT(bp) NULL +#endif + +#ifndef BP_FUNC +#define BP_FUNC(bp) 0 +#endif + +#ifndef BP_PORT +#define BP_PORT(bp) 0 +#endif + +#ifndef BNX2X_ILT_FREE +#define BNX2X_ILT_FREE(x, y, sz) +#endif + +#ifndef BNX2X_ILT_ZALLOC +#define BNX2X_ILT_ZALLOC(x, y, sz) +#endif + +#ifndef ILOG2 +#define ILOG2(x) x +#endif + +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len); +static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val); +static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, + dma_addr_t phys_addr, u32 addr, + u32 len); + +static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, + const u32 *data, u32 len) +{ + u32 i; + + for (i = 0; i < len; i++) + REG_WR(bp, addr + i*4, data[i]); +} + +static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, + const u32 *data, u32 len) +{ + u32 i; + + for (i = 0; i < len; i++) + bnx2x_reg_wr_ind(bp, addr + i*4, data[i]); +} + +static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len, + u8 wb) +{ + if (bp->dmae_ready) + bnx2x_write_dmae_phys_len(bp, GUNZIP_PHYS(bp), addr, len); + + /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ + else if (wb && CHIP_IS_E1(bp)) + bnx2x_init_ind_wr(bp, addr, GUNZIP_BUF(bp), len); + + /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ + else + bnx2x_init_str_wr(bp, addr, GUNZIP_BUF(bp), len); +} + +static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, + u32 len, u8 wb) +{ + u32 buf_len = (((len*4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len*4)); + u32 buf_len32 = buf_len/4; + u32 i; + + memset(GUNZIP_BUF(bp), (u8)fill, buf_len); + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf(bp, addr + i*4, cur_len, wb); + } +} + +static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len) +{ + if (bp->dmae_ready) + bnx2x_write_dmae_phys_len(bp, GUNZIP_PHYS(bp), addr, len); + + /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ + else if (CHIP_IS_E1(bp)) + bnx2x_init_ind_wr(bp, addr, GUNZIP_BUF(bp), len); + + /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ + else + bnx2x_init_str_wr(bp, addr, GUNZIP_BUF(bp), len); +} + +static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, + const u32 *data, u32 len64) +{ + u32 buf_len32 = FW_BUF_SIZE/4; + u32 len = len64*2; + u64 data64 = 0; + u32 i; + + /* 64 bit value is in a blob: first low DWORD, then high DWORD */ + data64 = HILO_U64((*(data + 1)), (*data)); + + len64 = min((u32)(FW_BUF_SIZE/8), len64); + for (i = 0; i < len64; i++) { + u64 *pdata = ((u64 *)(GUNZIP_BUF(bp))) + i; + + *pdata = data64; + } + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf_wb(bp, addr + i*4, cur_len); + } +} + +/********************************************************* + There are different blobs for each PRAM section. + In addition, each blob write operation is divided into a few operations + in order to decrease the amount of phys. contiguous buffer needed. + Thus, when we select a blob the address may be with some offset + from the beginning of PRAM section. + The same holds for the INT_TABLE sections. +**********************************************************/ +#define IF_IS_INT_TABLE_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) + +#define IF_IS_PRAM_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) + +static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, + const u8 *data) +{ + IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) + data = INIT_TSEM_INT_TABLE_DATA(bp); + else + IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) + data = INIT_CSEM_INT_TABLE_DATA(bp); + else + IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) + data = INIT_USEM_INT_TABLE_DATA(bp); + else + IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) + data = INIT_XSEM_INT_TABLE_DATA(bp); + else + IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) + data = INIT_TSEM_PRAM_DATA(bp); + else + IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) + data = INIT_CSEM_PRAM_DATA(bp); + else + IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) + data = INIT_USEM_PRAM_DATA(bp); + else + IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) + data = INIT_XSEM_PRAM_DATA(bp); + + return data; +} + +static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, + const u32 *data, u32 len) +{ + if (bp->dmae_ready) + VIRT_WR_DMAE_LEN(bp, data, addr, len, 0); + + /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ + else if (CHIP_IS_E1(bp)) + bnx2x_init_ind_wr(bp, addr, data, len); + + /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ + else + bnx2x_init_str_wr(bp, addr, data, len); +} + +static void bnx2x_wr_64(struct bnx2x *bp, u32 reg, u32 val_lo, + u32 val_hi) +{ + u32 wb_write[2]; + + wb_write[0] = val_lo; + wb_write[1] = val_hi; + REG_WR_DMAE_LEN(bp, reg, wb_write, 2); +} +static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr, u32 len, + u32 blob_off) +{ + const u8 *data = NULL; + int rc; + u32 i; + + data = bnx2x_sel_blob(bp, addr, data) + blob_off*4; + + rc = bnx2x_gunzip(bp, data, len); + if (rc) + return; + + /* gunzip_outlen is in dwords */ + len = GUNZIP_OUTLEN(bp); + for (i = 0; i < len; i++) + ((u32 *)GUNZIP_BUF(bp))[i] = (__force u32) + cpu_to_le32(((u32 *)GUNZIP_BUF(bp))[i]); + + bnx2x_write_big_buf_wb(bp, addr, len); +} + +static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage) +{ + u16 op_start = + INIT_OPS_OFFSETS(bp)[BLOCK_OPS_IDX(block, stage, + STAGE_START)]; + u16 op_end = + INIT_OPS_OFFSETS(bp)[BLOCK_OPS_IDX(block, stage, + STAGE_END)]; + const union init_op *op; + u32 op_idx, op_type, addr, len; + const u32 *data, *data_base; + + /* If empty block */ + if (op_start == op_end) + return; + + data_base = INIT_DATA(bp); + + for (op_idx = op_start; op_idx < op_end; op_idx++) { + + op = (const union init_op *)&(INIT_OPS(bp)[op_idx]); + /* Get generic data */ + op_type = op->raw.op; + addr = op->raw.offset; + /* Get data that's used for OP_SW, OP_WB, OP_FW, OP_ZP and + * OP_WR64 (we assume that op_arr_write and op_write have the + * same structure). + */ + len = op->arr_wr.data_len; + data = data_base + op->arr_wr.data_off; + + switch (op_type) { + case OP_RD: + REG_RD(bp, addr); + break; + case OP_WR: + REG_WR(bp, addr, op->write.val); + break; + case OP_SW: + bnx2x_init_str_wr(bp, addr, data, len); + break; + case OP_WB: + bnx2x_init_wr_wb(bp, addr, data, len); + break; + case OP_ZR: + bnx2x_init_fill(bp, addr, 0, op->zero.len, 0); + break; + case OP_WB_ZR: + bnx2x_init_fill(bp, addr, 0, op->zero.len, 1); + break; + case OP_ZP: + bnx2x_init_wr_zp(bp, addr, len, + op->arr_wr.data_off); + break; + case OP_WR_64: + bnx2x_init_wr_64(bp, addr, data, len); + break; + case OP_IF_MODE_AND: + /* if any of the flags doesn't match, skip the + * conditional block. + */ + if ((INIT_MODE_FLAGS(bp) & + op->if_mode.mode_bit_map) != + op->if_mode.mode_bit_map) + op_idx += op->if_mode.cmd_offset; + break; + case OP_IF_MODE_OR: + /* if all the flags don't match, skip the conditional + * block. + */ + if ((INIT_MODE_FLAGS(bp) & + op->if_mode.mode_bit_map) == 0) + op_idx += op->if_mode.cmd_offset; + break; + default: + /* Should never get here! */ + + break; + } + } +} + + +/**************************************************************************** +* PXP Arbiter +****************************************************************************/ +/* + * This code configures the PCI read/write arbiter + * which implements a weighted round robin + * between the virtual queues in the chip. + * + * The values were derived for each PCI max payload and max request size. + * since max payload and max request size are only known at run time, + * this is done as a separate init stage. + */ + +#define NUM_WR_Q 13 +#define NUM_RD_Q 29 +#define MAX_RD_ORD 3 +#define MAX_WR_ORD 2 + +/* configuration for one arbiter queue */ +struct arb_line { + int l; + int add; + int ubound; +}; + +/* derived configuration for each read queue for each max request size */ +static const struct arb_line read_arb_data[NUM_RD_Q][MAX_RD_ORD + 1] = { +/* 1 */ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} }, + { {4, 8, 4}, {4, 8, 4}, {4, 8, 4}, {4, 8, 4} }, + { {4, 3, 3}, {4, 3, 3}, {4, 3, 3}, {4, 3, 3} }, + { {8, 3, 6}, {16, 3, 11}, {16, 3, 11}, {16, 3, 11} }, + { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, +/* 10 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 64, 6}, {16, 64, 11}, {32, 64, 21}, {32, 64, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, +/* 20 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, + { {8, 64, 25}, {16, 64, 41}, {32, 64, 81}, {64, 64, 120} } +}; + +/* derived configuration for each write queue for each max request size */ +static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = { +/* 1 */ { {4, 6, 3}, {4, 6, 3}, {4, 6, 3} }, + { {4, 2, 3}, {4, 2, 3}, {4, 2, 3} }, + { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} }, + { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} }, + { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} }, + { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} }, + { {8, 64, 25}, {16, 64, 25}, {32, 64, 25} }, + { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} }, + { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} }, +/* 10 */{ {8, 9, 6}, {16, 9, 11}, {32, 9, 21} }, + { {8, 47, 19}, {16, 47, 19}, {32, 47, 21} }, + { {8, 9, 6}, {16, 9, 11}, {16, 9, 11} }, + { {8, 64, 25}, {16, 64, 41}, {32, 64, 81} } +}; + +/* register addresses for read queues */ +static const struct arb_line read_arb_addr[NUM_RD_Q-1] = { +/* 1 */ {PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0, + PXP2_REG_RQ_BW_RD_UBOUND0}, + {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1, + PXP2_REG_PSWRQ_BW_UB1}, + {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2, + PXP2_REG_PSWRQ_BW_UB2}, + {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3, + PXP2_REG_PSWRQ_BW_UB3}, + {PXP2_REG_RQ_BW_RD_L4, PXP2_REG_RQ_BW_RD_ADD4, + PXP2_REG_RQ_BW_RD_UBOUND4}, + {PXP2_REG_RQ_BW_RD_L5, PXP2_REG_RQ_BW_RD_ADD5, + PXP2_REG_RQ_BW_RD_UBOUND5}, + {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6, + PXP2_REG_PSWRQ_BW_UB6}, + {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7, + PXP2_REG_PSWRQ_BW_UB7}, + {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8, + PXP2_REG_PSWRQ_BW_UB8}, +/* 10 */{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9, + PXP2_REG_PSWRQ_BW_UB9}, + {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10, + PXP2_REG_PSWRQ_BW_UB10}, + {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11, + PXP2_REG_PSWRQ_BW_UB11}, + {PXP2_REG_RQ_BW_RD_L12, PXP2_REG_RQ_BW_RD_ADD12, + PXP2_REG_RQ_BW_RD_UBOUND12}, + {PXP2_REG_RQ_BW_RD_L13, PXP2_REG_RQ_BW_RD_ADD13, + PXP2_REG_RQ_BW_RD_UBOUND13}, + {PXP2_REG_RQ_BW_RD_L14, PXP2_REG_RQ_BW_RD_ADD14, + PXP2_REG_RQ_BW_RD_UBOUND14}, + {PXP2_REG_RQ_BW_RD_L15, PXP2_REG_RQ_BW_RD_ADD15, + PXP2_REG_RQ_BW_RD_UBOUND15}, + {PXP2_REG_RQ_BW_RD_L16, PXP2_REG_RQ_BW_RD_ADD16, + PXP2_REG_RQ_BW_RD_UBOUND16}, + {PXP2_REG_RQ_BW_RD_L17, PXP2_REG_RQ_BW_RD_ADD17, + PXP2_REG_RQ_BW_RD_UBOUND17}, + {PXP2_REG_RQ_BW_RD_L18, PXP2_REG_RQ_BW_RD_ADD18, + PXP2_REG_RQ_BW_RD_UBOUND18}, +/* 20 */{PXP2_REG_RQ_BW_RD_L19, PXP2_REG_RQ_BW_RD_ADD19, + PXP2_REG_RQ_BW_RD_UBOUND19}, + {PXP2_REG_RQ_BW_RD_L20, PXP2_REG_RQ_BW_RD_ADD20, + PXP2_REG_RQ_BW_RD_UBOUND20}, + {PXP2_REG_RQ_BW_RD_L22, PXP2_REG_RQ_BW_RD_ADD22, + PXP2_REG_RQ_BW_RD_UBOUND22}, + {PXP2_REG_RQ_BW_RD_L23, PXP2_REG_RQ_BW_RD_ADD23, + PXP2_REG_RQ_BW_RD_UBOUND23}, + {PXP2_REG_RQ_BW_RD_L24, PXP2_REG_RQ_BW_RD_ADD24, + PXP2_REG_RQ_BW_RD_UBOUND24}, + {PXP2_REG_RQ_BW_RD_L25, PXP2_REG_RQ_BW_RD_ADD25, + PXP2_REG_RQ_BW_RD_UBOUND25}, + {PXP2_REG_RQ_BW_RD_L26, PXP2_REG_RQ_BW_RD_ADD26, + PXP2_REG_RQ_BW_RD_UBOUND26}, + {PXP2_REG_RQ_BW_RD_L27, PXP2_REG_RQ_BW_RD_ADD27, + PXP2_REG_RQ_BW_RD_UBOUND27}, + {PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28, + PXP2_REG_PSWRQ_BW_UB28} +}; + +/* register addresses for write queues */ +static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { +/* 1 */ {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1, + PXP2_REG_PSWRQ_BW_UB1}, + {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2, + PXP2_REG_PSWRQ_BW_UB2}, + {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3, + PXP2_REG_PSWRQ_BW_UB3}, + {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6, + PXP2_REG_PSWRQ_BW_UB6}, + {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7, + PXP2_REG_PSWRQ_BW_UB7}, + {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8, + PXP2_REG_PSWRQ_BW_UB8}, + {PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9, + PXP2_REG_PSWRQ_BW_UB9}, + {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10, + PXP2_REG_PSWRQ_BW_UB10}, + {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11, + PXP2_REG_PSWRQ_BW_UB11}, +/* 10 */{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28, + PXP2_REG_PSWRQ_BW_UB28}, + {PXP2_REG_RQ_BW_WR_L29, PXP2_REG_RQ_BW_WR_ADD29, + PXP2_REG_RQ_BW_WR_UBOUND29}, + {PXP2_REG_RQ_BW_WR_L30, PXP2_REG_RQ_BW_WR_ADD30, + PXP2_REG_RQ_BW_WR_UBOUND30} +}; + +static void bnx2x_init_pxp_arb(struct bnx2x *bp, int r_order, + int w_order) +{ + u32 val, i; + + if (r_order > MAX_RD_ORD) { + DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", + r_order, MAX_RD_ORD); + r_order = MAX_RD_ORD; + } + if (w_order > MAX_WR_ORD) { + DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n", + w_order, MAX_WR_ORD); + w_order = MAX_WR_ORD; + } + if (CHIP_REV_IS_FPGA(bp)) { + DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n"); + w_order = 0; + } + DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order); + + for (i = 0; i < NUM_RD_Q-1; i++) { + REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l); + REG_WR(bp, read_arb_addr[i].add, + read_arb_data[i][r_order].add); + REG_WR(bp, read_arb_addr[i].ubound, + read_arb_data[i][r_order].ubound); + } + + for (i = 0; i < NUM_WR_Q-1; i++) { + if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) || + (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) { + + REG_WR(bp, write_arb_addr[i].l, + write_arb_data[i][w_order].l); + + REG_WR(bp, write_arb_addr[i].add, + write_arb_data[i][w_order].add); + + REG_WR(bp, write_arb_addr[i].ubound, + write_arb_data[i][w_order].ubound); + } else { + + val = REG_RD(bp, write_arb_addr[i].l); + REG_WR(bp, write_arb_addr[i].l, + val | (write_arb_data[i][w_order].l << 10)); + + val = REG_RD(bp, write_arb_addr[i].add); + REG_WR(bp, write_arb_addr[i].add, + val | (write_arb_data[i][w_order].add << 10)); + + val = REG_RD(bp, write_arb_addr[i].ubound); + REG_WR(bp, write_arb_addr[i].ubound, + val | (write_arb_data[i][w_order].ubound << 7)); + } + } + + val = write_arb_data[NUM_WR_Q-1][w_order].add; + val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10; + val += write_arb_data[NUM_WR_Q-1][w_order].l << 17; + REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val); + + val = read_arb_data[NUM_RD_Q-1][r_order].add; + val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10; + val += read_arb_data[NUM_RD_Q-1][r_order].l << 17; + REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); + + REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); + REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); + + if ((CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) && (r_order == MAX_RD_ORD)) + REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); + + if (CHIP_IS_E3(bp)) + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x4 << w_order)); + else if (CHIP_IS_E2(bp)) + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x8 << w_order)); + else + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); + + if (!CHIP_IS_E1(bp)) { + /* MPS w_order optimal TH presently TH + * 128 0 0 2 + * 256 1 1 3 + * >=512 2 2 3 + */ + /* DMAE is special */ + if (!CHIP_IS_E1H(bp)) { + /* E2 can use optimal TH */ + val = w_order; + REG_WR(bp, PXP2_REG_WR_DMAE_MPS, val); + } else { + val = ((w_order == 0) ? 2 : 3); + REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); + } + + REG_WR(bp, PXP2_REG_WR_HC_MPS, val); + REG_WR(bp, PXP2_REG_WR_USDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_QM_MPS, val); + REG_WR(bp, PXP2_REG_WR_TM_MPS, val); + REG_WR(bp, PXP2_REG_WR_SRC_MPS, val); + REG_WR(bp, PXP2_REG_WR_DBG_MPS, val); + REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); + } + + /* Validate number of tags suppoted by device */ +#define PCIE_REG_PCIER_TL_HDR_FC_ST 0x2980 + val = REG_RD(bp, PCIE_REG_PCIER_TL_HDR_FC_ST); + val &= 0xFF; + if (val <= 0x20) + REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x20); +} + +/**************************************************************************** +* ILT management +****************************************************************************/ +/* + * This codes hides the low level HW interaction for ILT management and + * configuration. The API consists of a shadow ILT table which is set by the + * driver and a set of routines to use it to configure the HW. + * + */ + +/* ILT HW init operations */ + +/* ILT memory management operations */ +#define ILT_MEMOP_ALLOC 0 +#define ILT_MEMOP_FREE 1 + +/* the phys address is shifted right 12 bits and has an added + * 1=valid bit added to the 53rd bit + * then since this is a wide register(TM) + * we split it into two 32 bit writes + */ +#define ILT_ADDR1(x) ((u32)(((u64)x >> 12) & 0xFFFFFFFF)) +#define ILT_ADDR2(x) ((u32)((1 << 20) | ((u64)x >> 44))) +#define ILT_RANGE(f, l) (((l) << 10) | f) + +static int bnx2x_ilt_line_mem_op(struct bnx2x *bp, + struct ilt_line *line, u32 size, u8 memop) +{ + if (memop == ILT_MEMOP_FREE) { + BNX2X_ILT_FREE(line->page, line->page_mapping, line->size); + return 0; + } + BNX2X_ILT_ZALLOC(line->page, &line->page_mapping, size); + if (!line->page) + return -1; + line->size = size; + return 0; +} + + +static int bnx2x_ilt_client_mem_op(struct bnx2x *bp, int cli_num, + u8 memop) +{ + int i, rc; + struct bnx2x_ilt *ilt = BP_ILT(bp); + struct ilt_client_info *ilt_cli; + + if (!ilt || !ilt->lines) + return -1; + + ilt_cli = &ilt->clients[cli_num]; + + if (ilt_cli->flags & (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM)) + return 0; + + for (rc = 0, i = ilt_cli->start; i <= ilt_cli->end && !rc; i++) { + rc = bnx2x_ilt_line_mem_op(bp, &ilt->lines[i], + ilt_cli->page_size, memop); + } + return rc; +} + +static int bnx2x_ilt_mem_op_cnic(struct bnx2x *bp, u8 memop) +{ + int rc = 0; + + if (CONFIGURE_NIC_MODE(bp)) + rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_SRC, memop); + if (!rc) + rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_TM, memop); + + return rc; +} + +static int bnx2x_ilt_mem_op(struct bnx2x *bp, u8 memop) +{ + int rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_CDU, memop); + if (!rc) + rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_QM, memop); + if (!rc && CNIC_SUPPORT(bp) && !CONFIGURE_NIC_MODE(bp)) + rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_SRC, memop); + + return rc; +} + +static void bnx2x_ilt_line_wr(struct bnx2x *bp, int abs_idx, + dma_addr_t page_mapping) +{ + u32 reg; + + if (CHIP_IS_E1(bp)) + reg = PXP2_REG_RQ_ONCHIP_AT + abs_idx*8; + else + reg = PXP2_REG_RQ_ONCHIP_AT_B0 + abs_idx*8; + + bnx2x_wr_64(bp, reg, ILT_ADDR1(page_mapping), ILT_ADDR2(page_mapping)); +} + +static void bnx2x_ilt_line_init_op(struct bnx2x *bp, + struct bnx2x_ilt *ilt, int idx, u8 initop) +{ + dma_addr_t null_mapping; + int abs_idx = ilt->start_line + idx; + + + switch (initop) { + case INITOP_INIT: + /* set in the init-value array */ + case INITOP_SET: + bnx2x_ilt_line_wr(bp, abs_idx, ilt->lines[idx].page_mapping); + break; + case INITOP_CLEAR: + null_mapping = 0; + bnx2x_ilt_line_wr(bp, abs_idx, null_mapping); + break; + } +} + +static void bnx2x_ilt_boundry_init_op(struct bnx2x *bp, + struct ilt_client_info *ilt_cli, + u32 ilt_start, u8 initop) +{ + u32 start_reg = 0; + u32 end_reg = 0; + + /* The boundary is either SET or INIT, + CLEAR => SET and for now SET ~~ INIT */ + + /* find the appropriate regs */ + if (CHIP_IS_E1(bp)) { + switch (ilt_cli->client_num) { + case ILT_CLIENT_CDU: + start_reg = PXP2_REG_PSWRQ_CDU0_L2P; + break; + case ILT_CLIENT_QM: + start_reg = PXP2_REG_PSWRQ_QM0_L2P; + break; + case ILT_CLIENT_SRC: + start_reg = PXP2_REG_PSWRQ_SRC0_L2P; + break; + case ILT_CLIENT_TM: + start_reg = PXP2_REG_PSWRQ_TM0_L2P; + break; + } + REG_WR(bp, start_reg + BP_FUNC(bp)*4, + ILT_RANGE((ilt_start + ilt_cli->start), + (ilt_start + ilt_cli->end))); + } else { + switch (ilt_cli->client_num) { + case ILT_CLIENT_CDU: + start_reg = PXP2_REG_RQ_CDU_FIRST_ILT; + end_reg = PXP2_REG_RQ_CDU_LAST_ILT; + break; + case ILT_CLIENT_QM: + start_reg = PXP2_REG_RQ_QM_FIRST_ILT; + end_reg = PXP2_REG_RQ_QM_LAST_ILT; + break; + case ILT_CLIENT_SRC: + start_reg = PXP2_REG_RQ_SRC_FIRST_ILT; + end_reg = PXP2_REG_RQ_SRC_LAST_ILT; + break; + case ILT_CLIENT_TM: + start_reg = PXP2_REG_RQ_TM_FIRST_ILT; + end_reg = PXP2_REG_RQ_TM_LAST_ILT; + break; + } + REG_WR(bp, start_reg, (ilt_start + ilt_cli->start)); + REG_WR(bp, end_reg, (ilt_start + ilt_cli->end)); + } +} + +static void bnx2x_ilt_client_init_op_ilt(struct bnx2x *bp, + struct bnx2x_ilt *ilt, + struct ilt_client_info *ilt_cli, + u8 initop) +{ + int i; + + if (ilt_cli->flags & ILT_CLIENT_SKIP_INIT) + return; + + for (i = ilt_cli->start; i <= ilt_cli->end; i++) + bnx2x_ilt_line_init_op(bp, ilt, i, initop); + + /* init/clear the ILT boundries */ + bnx2x_ilt_boundry_init_op(bp, ilt_cli, ilt->start_line, initop); +} + +static void bnx2x_ilt_client_init_op(struct bnx2x *bp, + struct ilt_client_info *ilt_cli, u8 initop) +{ + struct bnx2x_ilt *ilt = BP_ILT(bp); + + bnx2x_ilt_client_init_op_ilt(bp, ilt, ilt_cli, initop); +} + +static void bnx2x_ilt_client_id_init_op(struct bnx2x *bp, + int cli_num, u8 initop) +{ + struct bnx2x_ilt *ilt = BP_ILT(bp); + struct ilt_client_info *ilt_cli = &ilt->clients[cli_num]; + + bnx2x_ilt_client_init_op(bp, ilt_cli, initop); +} + +static void bnx2x_ilt_init_op_cnic(struct bnx2x *bp, u8 initop) +{ + if (CONFIGURE_NIC_MODE(bp)) + bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_SRC, initop); + bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_TM, initop); +} + +static void bnx2x_ilt_init_op(struct bnx2x *bp, u8 initop) +{ + bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_CDU, initop); + bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_QM, initop); + if (CNIC_SUPPORT(bp) && !CONFIGURE_NIC_MODE(bp)) + bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_SRC, initop); +} + +static void bnx2x_ilt_init_client_psz(struct bnx2x *bp, int cli_num, + u32 psz_reg, u8 initop) +{ + struct bnx2x_ilt *ilt = BP_ILT(bp); + struct ilt_client_info *ilt_cli = &ilt->clients[cli_num]; + + if (ilt_cli->flags & ILT_CLIENT_SKIP_INIT) + return; + + switch (initop) { + case INITOP_INIT: + /* set in the init-value array */ + case INITOP_SET: + REG_WR(bp, psz_reg, ILOG2(ilt_cli->page_size >> 12)); + break; + case INITOP_CLEAR: + break; + } +} + +/* + * called during init common stage, ilt clients should be initialized + * prioir to calling this function + */ +static void bnx2x_ilt_init_page_size(struct bnx2x *bp, u8 initop) +{ + bnx2x_ilt_init_client_psz(bp, ILT_CLIENT_CDU, + PXP2_REG_RQ_CDU_P_SIZE, initop); + bnx2x_ilt_init_client_psz(bp, ILT_CLIENT_QM, + PXP2_REG_RQ_QM_P_SIZE, initop); + bnx2x_ilt_init_client_psz(bp, ILT_CLIENT_SRC, + PXP2_REG_RQ_SRC_P_SIZE, initop); + bnx2x_ilt_init_client_psz(bp, ILT_CLIENT_TM, + PXP2_REG_RQ_TM_P_SIZE, initop); +} + +/**************************************************************************** +* QM initializations +****************************************************************************/ +#define QM_QUEUES_PER_FUNC 16 /* E1 has 32, but only 16 are used */ +#define QM_INIT_MIN_CID_COUNT 31 +#define QM_INIT(cid_cnt) (cid_cnt > QM_INIT_MIN_CID_COUNT) + +/* called during init port stage */ +static void bnx2x_qm_init_cid_count(struct bnx2x *bp, int qm_cid_count, + u8 initop) +{ + int port = BP_PORT(bp); + + if (QM_INIT(qm_cid_count)) { + switch (initop) { + case INITOP_INIT: + /* set in the init-value array */ + case INITOP_SET: + REG_WR(bp, QM_REG_CONNNUM_0 + port*4, + qm_cid_count/16 - 1); + break; + case INITOP_CLEAR: + break; + } + } +} + +static void bnx2x_qm_set_ptr_table(struct bnx2x *bp, int qm_cid_count, + u32 base_reg, u32 reg) +{ + int i; + u32 wb_data[2] = {0, 0}; + for (i = 0; i < 4 * QM_QUEUES_PER_FUNC; i++) { + REG_WR(bp, base_reg + i*4, + qm_cid_count * 4 * (i % QM_QUEUES_PER_FUNC)); + bnx2x_init_wr_wb(bp, reg + i*8, wb_data, 2); + } +} + +/* called during init common stage */ +static void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count, + u8 initop) +{ + if (!QM_INIT(qm_cid_count)) + return; + + switch (initop) { + case INITOP_INIT: + /* set in the init-value array */ + case INITOP_SET: + bnx2x_qm_set_ptr_table(bp, qm_cid_count, + QM_REG_BASEADDR, QM_REG_PTRTBL); + if (CHIP_IS_E1H(bp)) + bnx2x_qm_set_ptr_table(bp, qm_cid_count, + QM_REG_BASEADDR_EXT_A, + QM_REG_PTRTBL_EXT_A); + break; + case INITOP_CLEAR: + break; + } +} + +/**************************************************************************** +* SRC initializations +****************************************************************************/ +/* called during init func stage */ +static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2, + dma_addr_t t2_mapping, int src_cid_count) +{ + int i; + int port = BP_PORT(bp); + + /* Initialize T2 */ + for (i = 0; i < src_cid_count-1; i++) + t2[i].next = (u64)(t2_mapping + + (i+1)*sizeof(struct src_ent)); + + /* tell the searcher where the T2 table is */ + REG_WR(bp, SRC_REG_COUNTFREE0 + port*4, src_cid_count); + + bnx2x_wr_64(bp, SRC_REG_FIRSTFREE0 + port*16, + U64_LO(t2_mapping), U64_HI(t2_mapping)); + + bnx2x_wr_64(bp, SRC_REG_LASTFREE0 + port*16, + U64_LO((u64)t2_mapping + + (src_cid_count-1) * sizeof(struct src_ent)), + U64_HI((u64)t2_mapping + + (src_cid_count-1) * sizeof(struct src_ent))); +} +#endif /* BNX2X_INIT_OPS_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c new file mode 100644 index 000000000..98d4c5a3f --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -0,0 +1,14077 @@ +/* Copyright 2008-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Qlogic software provided under a + * license other than the GPL, without Qlogic's express prior written + * consent. + * + * Written by Yaniv Rosner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mutex.h> + +#include "bnx2x.h" +#include "bnx2x_cmn.h" + +typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, + struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8); +/********************************************************/ +#define MDIO_ACCESS_TIMEOUT 1000 +#define WC_LANE_MAX 4 +#define I2C_SWITCH_WIDTH 2 +#define I2C_BSC0 0 +#define I2C_BSC1 1 +#define I2C_WA_RETRY_CNT 3 +#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1) +#define MCPR_IMC_COMMAND_READ_OP 1 +#define MCPR_IMC_COMMAND_WRITE_OP 2 + +/* LED Blink rate that will achieve ~15.9Hz */ +#define LED_BLINK_RATE_VAL_E3 354 +#define LED_BLINK_RATE_VAL_E1X_E2 480 +/***********************************************************/ +/* Shortcut definitions */ +/***********************************************************/ + +#define NIG_LATCH_BC_ENABLE_MI_INT 0 + +#define NIG_STATUS_EMAC0_MI_INT \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT +#define NIG_STATUS_XGXS0_LINK10G \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G +#define NIG_STATUS_XGXS0_LINK_STATUS \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS +#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE +#define NIG_STATUS_SERDES0_LINK_STATUS \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS +#define NIG_MASK_MI_INT \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT +#define NIG_MASK_XGXS0_LINK10G \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G +#define NIG_MASK_XGXS0_LINK_STATUS \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS +#define NIG_MASK_SERDES0_LINK_STATUS \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS + +#define MDIO_AN_CL73_OR_37_COMPLETE \ + (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \ + MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE) + +#define XGXS_RESET_BITS \ + (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB) + +#define SERDES_RESET_BITS \ + (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD) + +#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37 +#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73 +#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM +#define AUTONEG_PARALLEL \ + SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION +#define AUTONEG_SGMII_FIBER_AUTODET \ + SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT +#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY + +#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \ + MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE +#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \ + MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE +#define GP_STATUS_SPEED_MASK \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK +#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M +#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M +#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G +#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G +#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G +#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G +#define GP_STATUS_10G_HIG \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG +#define GP_STATUS_10G_CX4 \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 +#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX +#define GP_STATUS_10G_KX4 \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 +#define GP_STATUS_10G_KR MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR +#define GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI +#define GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS +#define GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI +#define GP_STATUS_20G_KR2 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 +#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD +#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD +#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD +#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4 +#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD +#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD +#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD +#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD +#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD +#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD +#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD +#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD +#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD +#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD +#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD + +#define LINK_UPDATE_MASK \ + (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \ + LINK_STATUS_LINK_UP | \ + LINK_STATUS_PHYSICAL_LINK_FLAG | \ + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \ + LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \ + LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \ + LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE) + +#define SFP_EEPROM_CON_TYPE_ADDR 0x2 + #define SFP_EEPROM_CON_TYPE_VAL_UNKNOWN 0x0 + #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 + #define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21 + #define SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22 + + +#define SFP_EEPROM_10G_COMP_CODE_ADDR 0x3 + #define SFP_EEPROM_10G_COMP_CODE_SR_MASK (1<<4) + #define SFP_EEPROM_10G_COMP_CODE_LR_MASK (1<<5) + #define SFP_EEPROM_10G_COMP_CODE_LRM_MASK (1<<6) + +#define SFP_EEPROM_1G_COMP_CODE_ADDR 0x6 + #define SFP_EEPROM_1G_COMP_CODE_SX (1<<0) + #define SFP_EEPROM_1G_COMP_CODE_LX (1<<1) + #define SFP_EEPROM_1G_COMP_CODE_CX (1<<2) + #define SFP_EEPROM_1G_COMP_CODE_BASE_T (1<<3) + +#define SFP_EEPROM_FC_TX_TECH_ADDR 0x8 + #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4 + #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8 + +#define SFP_EEPROM_OPTIONS_ADDR 0x40 + #define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1 +#define SFP_EEPROM_OPTIONS_SIZE 2 + +#define EDC_MODE_LINEAR 0x0022 +#define EDC_MODE_LIMITING 0x0044 +#define EDC_MODE_PASSIVE_DAC 0x0055 +#define EDC_MODE_ACTIVE_DAC 0x0066 + +/* ETS defines*/ +#define DCBX_INVALID_COS (0xFF) + +#define ETS_BW_LIMIT_CREDIT_UPPER_BOUND (0x5000) +#define ETS_BW_LIMIT_CREDIT_WEIGHT (0x5000) +#define ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS (1360) +#define ETS_E3B0_NIG_MIN_W_VAL_20GBPS (2720) +#define ETS_E3B0_PBF_MIN_W_VAL (10000) + +#define MAX_PACKET_SIZE (9700) +#define MAX_KR_LINK_RETRY 4 +#define DEFAULT_TX_DRV_BRDCT 2 +#define DEFAULT_TX_DRV_IFIR 0 +#define DEFAULT_TX_DRV_POST2 3 +#define DEFAULT_TX_DRV_IPRE_DRIVER 6 + +/**********************************************************/ +/* INTERFACE */ +/**********************************************************/ + +#define CL22_WR_OVER_CL45(_bp, _phy, _bank, _addr, _val) \ + bnx2x_cl45_write(_bp, _phy, \ + (_phy)->def_md_devad, \ + (_bank + (_addr & 0xf)), \ + _val) + +#define CL22_RD_OVER_CL45(_bp, _phy, _bank, _addr, _val) \ + bnx2x_cl45_read(_bp, _phy, \ + (_phy)->def_md_devad, \ + (_bank + (_addr & 0xf)), \ + _val) + +static int bnx2x_check_half_open_conn(struct link_params *params, + struct link_vars *vars, u8 notify); +static int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params); + +static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) +{ + u32 val = REG_RD(bp, reg); + + val |= bits; + REG_WR(bp, reg, val); + return val; +} + +static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) +{ + u32 val = REG_RD(bp, reg); + + val &= ~bits; + REG_WR(bp, reg, val); + return val; +} + +/* + * bnx2x_check_lfa - This function checks if link reinitialization is required, + * or link flap can be avoided. + * + * @params: link parameters + * Returns 0 if Link Flap Avoidance conditions are met otherwise, the failed + * condition code. + */ +static int bnx2x_check_lfa(struct link_params *params) +{ + u32 link_status, cfg_idx, lfa_mask, cfg_size; + u32 cur_speed_cap_mask, cur_req_fc_auto_adv, additional_config; + u32 saved_val, req_val, eee_status; + struct bnx2x *bp = params->bp; + + additional_config = + REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, additional_config)); + + /* NOTE: must be first condition checked - + * to verify DCC bit is cleared in any case! + */ + if (additional_config & NO_LFA_DUE_TO_DCC_MASK) { + DP(NETIF_MSG_LINK, "No LFA due to DCC flap after clp exit\n"); + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, additional_config), + additional_config & ~NO_LFA_DUE_TO_DCC_MASK); + return LFA_DCC_LFA_DISABLED; + } + + /* Verify that link is up */ + link_status = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + port_mb[params->port].link_status)); + if (!(link_status & LINK_STATUS_LINK_UP)) + return LFA_LINK_DOWN; + + /* if loaded after BOOT from SAN, don't flap the link in any case and + * rely on link set by preboot driver + */ + if (params->feature_config_flags & FEATURE_CONFIG_BOOT_FROM_SAN) + return 0; + + /* Verify that loopback mode is not set */ + if (params->loopback_mode) + return LFA_LOOPBACK_ENABLED; + + /* Verify that MFW supports LFA */ + if (!params->lfa_base) + return LFA_MFW_IS_TOO_OLD; + + if (params->num_phys == 3) { + cfg_size = 2; + lfa_mask = 0xffffffff; + } else { + cfg_size = 1; + lfa_mask = 0xffff; + } + + /* Compare Duplex */ + saved_val = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, req_duplex)); + req_val = params->req_duplex[0] | (params->req_duplex[1] << 16); + if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { + DP(NETIF_MSG_LINK, "Duplex mismatch %x vs. %x\n", + (saved_val & lfa_mask), (req_val & lfa_mask)); + return LFA_DUPLEX_MISMATCH; + } + /* Compare Flow Control */ + saved_val = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, req_flow_ctrl)); + req_val = params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16); + if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { + DP(NETIF_MSG_LINK, "Flow control mismatch %x vs. %x\n", + (saved_val & lfa_mask), (req_val & lfa_mask)); + return LFA_FLOW_CTRL_MISMATCH; + } + /* Compare Link Speed */ + saved_val = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, req_line_speed)); + req_val = params->req_line_speed[0] | (params->req_line_speed[1] << 16); + if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { + DP(NETIF_MSG_LINK, "Link speed mismatch %x vs. %x\n", + (saved_val & lfa_mask), (req_val & lfa_mask)); + return LFA_LINK_SPEED_MISMATCH; + } + + for (cfg_idx = 0; cfg_idx < cfg_size; cfg_idx++) { + cur_speed_cap_mask = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, + speed_cap_mask[cfg_idx])); + + if (cur_speed_cap_mask != params->speed_cap_mask[cfg_idx]) { + DP(NETIF_MSG_LINK, "Speed Cap mismatch %x vs. %x\n", + cur_speed_cap_mask, + params->speed_cap_mask[cfg_idx]); + return LFA_SPEED_CAP_MISMATCH; + } + } + + cur_req_fc_auto_adv = + REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, additional_config)) & + REQ_FC_AUTO_ADV_MASK; + + if ((u16)cur_req_fc_auto_adv != params->req_fc_auto_adv) { + DP(NETIF_MSG_LINK, "Flow Ctrl AN mismatch %x vs. %x\n", + cur_req_fc_auto_adv, params->req_fc_auto_adv); + return LFA_FLOW_CTRL_MISMATCH; + } + + eee_status = REG_RD(bp, params->shmem2_base + + offsetof(struct shmem2_region, + eee_status[params->port])); + + if (((eee_status & SHMEM_EEE_LPI_REQUESTED_BIT) ^ + (params->eee_mode & EEE_MODE_ENABLE_LPI)) || + ((eee_status & SHMEM_EEE_REQUESTED_BIT) ^ + (params->eee_mode & EEE_MODE_ADV_LPI))) { + DP(NETIF_MSG_LINK, "EEE mismatch %x vs. %x\n", params->eee_mode, + eee_status); + return LFA_EEE_MISMATCH; + } + + /* LFA conditions are met */ + return 0; +} +/******************************************************************/ +/* EPIO/GPIO section */ +/******************************************************************/ +static void bnx2x_get_epio(struct bnx2x *bp, u32 epio_pin, u32 *en) +{ + u32 epio_mask, gp_oenable; + *en = 0; + /* Sanity check */ + if (epio_pin > 31) { + DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to get\n", epio_pin); + return; + } + + epio_mask = 1 << epio_pin; + /* Set this EPIO to output */ + gp_oenable = REG_RD(bp, MCP_REG_MCPR_GP_OENABLE); + REG_WR(bp, MCP_REG_MCPR_GP_OENABLE, gp_oenable & ~epio_mask); + + *en = (REG_RD(bp, MCP_REG_MCPR_GP_INPUTS) & epio_mask) >> epio_pin; +} +static void bnx2x_set_epio(struct bnx2x *bp, u32 epio_pin, u32 en) +{ + u32 epio_mask, gp_output, gp_oenable; + + /* Sanity check */ + if (epio_pin > 31) { + DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to set\n", epio_pin); + return; + } + DP(NETIF_MSG_LINK, "Setting EPIO pin %d to %d\n", epio_pin, en); + epio_mask = 1 << epio_pin; + /* Set this EPIO to output */ + gp_output = REG_RD(bp, MCP_REG_MCPR_GP_OUTPUTS); + if (en) + gp_output |= epio_mask; + else + gp_output &= ~epio_mask; + + REG_WR(bp, MCP_REG_MCPR_GP_OUTPUTS, gp_output); + + /* Set the value for this EPIO */ + gp_oenable = REG_RD(bp, MCP_REG_MCPR_GP_OENABLE); + REG_WR(bp, MCP_REG_MCPR_GP_OENABLE, gp_oenable | epio_mask); +} + +static void bnx2x_set_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 val) +{ + if (pin_cfg == PIN_CFG_NA) + return; + if (pin_cfg >= PIN_CFG_EPIO0) { + bnx2x_set_epio(bp, pin_cfg - PIN_CFG_EPIO0, val); + } else { + u8 gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; + u8 gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; + bnx2x_set_gpio(bp, gpio_num, (u8)val, gpio_port); + } +} + +static u32 bnx2x_get_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 *val) +{ + if (pin_cfg == PIN_CFG_NA) + return -EINVAL; + if (pin_cfg >= PIN_CFG_EPIO0) { + bnx2x_get_epio(bp, pin_cfg - PIN_CFG_EPIO0, val); + } else { + u8 gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; + u8 gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; + *val = bnx2x_get_gpio(bp, gpio_num, gpio_port); + } + return 0; + +} +/******************************************************************/ +/* ETS section */ +/******************************************************************/ +static void bnx2x_ets_e2e3a0_disabled(struct link_params *params) +{ + /* ETS disabled configuration*/ + struct bnx2x *bp = params->bp; + + DP(NETIF_MSG_LINK, "ETS E2E3 disabled configuration\n"); + + /* mapping between entry priority to client number (0,1,2 -debug and + * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST) + * 3bits client num. + * PRI4 | PRI3 | PRI2 | PRI1 | PRI0 + * cos1-100 cos0-011 dbg1-010 dbg0-001 MCP-000 + */ + + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, 0x4688); + /* Bitmap of 5bits length. Each bit specifies whether the entry behaves + * as strict. Bits 0,1,2 - debug and management entries, 3 - + * COS0 entry, 4 - COS1 entry. + * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT + * bit4 bit3 bit2 bit1 bit0 + * MCP and debug are strict + */ + + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7); + /* defines which entries (clients) are subjected to WFQ arbitration */ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0); + /* For strict priority entries defines the number of consecutive + * slots for the highest priority. + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); + /* mapping between the CREDIT_WEIGHT registers and actual client + * numbers + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0); + + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, 0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, 0); + REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, 0); + /* ETS mode disable */ + REG_WR(bp, PBF_REG_ETS_ENABLED, 0); + /* If ETS mode is enabled (there is no strict priority) defines a WFQ + * weight for COS0/COS1. + */ + REG_WR(bp, PBF_REG_COS0_WEIGHT, 0x2710); + REG_WR(bp, PBF_REG_COS1_WEIGHT, 0x2710); + /* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter */ + REG_WR(bp, PBF_REG_COS0_UPPER_BOUND, 0x989680); + REG_WR(bp, PBF_REG_COS1_UPPER_BOUND, 0x989680); + /* Defines the number of consecutive slots for the strict priority */ + REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0); +} +/****************************************************************************** +* Description: +* Getting min_w_val will be set according to line speed . +*. +******************************************************************************/ +static u32 bnx2x_ets_get_min_w_val_nig(const struct link_vars *vars) +{ + u32 min_w_val = 0; + /* Calculate min_w_val.*/ + if (vars->link_up) { + if (vars->line_speed == SPEED_20000) + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; + else + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS; + } else + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; + /* If the link isn't up (static configuration for example ) The + * link will be according to 20GBPS. + */ + return min_w_val; +} +/****************************************************************************** +* Description: +* Getting credit upper bound form min_w_val. +*. +******************************************************************************/ +static u32 bnx2x_ets_get_credit_upper_bound(const u32 min_w_val) +{ + const u32 credit_upper_bound = (u32)MAXVAL((150 * min_w_val), + MAX_PACKET_SIZE); + return credit_upper_bound; +} +/****************************************************************************** +* Description: +* Set credit upper bound for NIG. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_set_credit_upper_bound_nig( + const struct link_params *params, + const u32 min_w_val) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 credit_upper_bound = + bnx2x_ets_get_credit_upper_bound(min_w_val); + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5, credit_upper_bound); + + if (!port) { + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6, + credit_upper_bound); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7, + credit_upper_bound); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8, + credit_upper_bound); + } +} +/****************************************************************************** +* Description: +* Will return the NIG ETS registers to init values.Except +* credit_upper_bound. +* That isn't used in this configuration (No WFQ is enabled) and will be +* configured according to spec +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params, + const struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 min_w_val = bnx2x_ets_get_min_w_val_nig(vars); + /* Mapping between entry priority to client number (0,1,2 -debug and + * management clients, 3 - COS0 client, 4 - COS1, ... 8 - + * COS5)(HIGHEST) 4bits client num.TODO_ETS - Should be done by + * reset value or init tool + */ + if (port) { + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, 0x543210); + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB, 0x0); + } else { + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, 0x76543210); + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, 0x8); + } + /* For strict priority entries defines the number of consecutive + * slots for the highest priority. + */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS : + NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); + /* Mapping between the CREDIT_WEIGHT registers and actual client + * numbers + */ + if (port) { + /*Port 1 has 6 COS*/ + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB, 0x210543); + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x0); + } else { + /*Port 0 has 9 COS*/ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB, + 0x43210876); + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x5); + } + + /* Bitmap of 5bits length. Each bit specifies whether the entry behaves + * as strict. Bits 0,1,2 - debug and management entries, 3 - + * COS0 entry, 4 - COS1 entry. + * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT + * bit4 bit3 bit2 bit1 bit0 + * MCP and debug are strict + */ + if (port) + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT, 0x3f); + else + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1ff); + /* defines which entries (clients) are subjected to WFQ arbitration */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : + NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0); + + /* Please notice the register address are note continuous and a + * for here is note appropriate.In 2 port mode port0 only COS0-5 + * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4 + * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT + * are never used for WFQ + */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5, 0x0); + if (!port) { + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6, 0x0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7, 0x0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8, 0x0); + } + + bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val); +} +/****************************************************************************** +* Description: +* Set credit upper bound for PBF. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_set_credit_upper_bound_pbf( + const struct link_params *params, + const u32 min_w_val) +{ + struct bnx2x *bp = params->bp; + const u32 credit_upper_bound = + bnx2x_ets_get_credit_upper_bound(min_w_val); + const u8 port = params->port; + u32 base_upper_bound = 0; + u8 max_cos = 0; + u8 i = 0; + /* In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4 + * port mode port1 has COS0-2 that can be used for WFQ. + */ + if (!port) { + base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P0; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; + } else { + base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P1; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; + } + + for (i = 0; i < max_cos; i++) + REG_WR(bp, base_upper_bound + (i << 2), credit_upper_bound); +} + +/****************************************************************************** +* Description: +* Will return the PBF ETS registers to init values.Except +* credit_upper_bound. +* That isn't used in this configuration (No WFQ is enabled) and will be +* configured according to spec +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; + u8 i = 0; + u32 base_weight = 0; + u8 max_cos = 0; + + /* Mapping between entry priority to client number 0 - COS0 + * client, 2 - COS1, ... 5 - COS5)(HIGHEST) 4bits client num. + * TODO_ETS - Should be done by reset value or init tool + */ + if (port) + /* 0x688 (|011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , 0x688); + else + /* (10 1|100 |011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , 0x2C688); + + /* TODO_ETS - Should be done by reset value or init tool */ + if (port) + /* 0x688 (|011|0 10|00 1|000)*/ + REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1, 0x688); + else + /* 0x2C688 (10 1|100 |011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0, 0x2C688); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 : + PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 , 0x100); + + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , 0); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 , 0); + /* In 2 port mode port0 has COS0-5 that can be used for WFQ. + * In 4 port mode port1 has COS0-2 that can be used for WFQ. + */ + if (!port) { + base_weight = PBF_REG_COS0_WEIGHT_P0; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; + } else { + base_weight = PBF_REG_COS0_WEIGHT_P1; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; + } + + for (i = 0; i < max_cos; i++) + REG_WR(bp, base_weight + (0x4 * i), 0); + + bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); +} +/****************************************************************************** +* Description: +* E3B0 disable will return basically the values to init values. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_disabled(const struct link_params *params, + const struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + + if (!CHIP_IS_E3B0(bp)) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n"); + return -EINVAL; + } + + bnx2x_ets_e3b0_nig_disabled(params, vars); + + bnx2x_ets_e3b0_pbf_disabled(params); + + return 0; +} + +/****************************************************************************** +* Description: +* Disable will return basically the values to init values. +* +******************************************************************************/ +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + + if ((CHIP_IS_E2(bp)) || (CHIP_IS_E3A0(bp))) + bnx2x_ets_e2e3a0_disabled(params); + else if (CHIP_IS_E3B0(bp)) + bnx2x_status = bnx2x_ets_e3b0_disabled(params, vars); + else { + DP(NETIF_MSG_LINK, "bnx2x_ets_disabled - chip not supported\n"); + return -EINVAL; + } + + return bnx2x_status; +} + +/****************************************************************************** +* Description +* Set the COS mappimg to SP and BW until this point all the COS are not +* set as SP or BW. +******************************************************************************/ +static int bnx2x_ets_e3b0_cli_map(const struct link_params *params, + const struct bnx2x_ets_params *ets_params, + const u8 cos_sp_bitmap, + const u8 cos_bw_bitmap) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u8 nig_cli_sp_bitmap = 0x7 | (cos_sp_bitmap << 3); + const u8 pbf_cli_sp_bitmap = cos_sp_bitmap; + const u8 nig_cli_subject2wfq_bitmap = cos_bw_bitmap << 3; + const u8 pbf_cli_subject2wfq_bitmap = cos_bw_bitmap; + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT : + NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, nig_cli_sp_bitmap); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , pbf_cli_sp_bitmap); + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : + NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, + nig_cli_subject2wfq_bitmap); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0, + pbf_cli_subject2wfq_bitmap); + + return 0; +} + +/****************************************************************************** +* Description: +* This function is needed because NIG ARB_CREDIT_WEIGHT_X are +* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. +******************************************************************************/ +static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, + const u8 cos_entry, + const u32 min_w_val_nig, + const u32 min_w_val_pbf, + const u16 total_bw, + const u8 bw, + const u8 port) +{ + u32 nig_reg_adress_crd_weight = 0; + u32 pbf_reg_adress_crd_weight = 0; + /* Calculate and set BW for this COS - use 1 instead of 0 for BW */ + const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw; + const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw; + + switch (cos_entry) { + case 0: + nig_reg_adress_crd_weight = + (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0; + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS0_WEIGHT_P1 : PBF_REG_COS0_WEIGHT_P0; + break; + case 1: + nig_reg_adress_crd_weight = (port) ? + NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1; + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS1_WEIGHT_P1 : PBF_REG_COS1_WEIGHT_P0; + break; + case 2: + nig_reg_adress_crd_weight = (port) ? + NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2; + + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS2_WEIGHT_P1 : PBF_REG_COS2_WEIGHT_P0; + break; + case 3: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3; + pbf_reg_adress_crd_weight = + PBF_REG_COS3_WEIGHT_P0; + break; + case 4: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4; + pbf_reg_adress_crd_weight = PBF_REG_COS4_WEIGHT_P0; + break; + case 5: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5; + pbf_reg_adress_crd_weight = PBF_REG_COS5_WEIGHT_P0; + break; + } + + REG_WR(bp, nig_reg_adress_crd_weight, cos_bw_nig); + + REG_WR(bp, pbf_reg_adress_crd_weight, cos_bw_pbf); + + return 0; +} +/****************************************************************************** +* Description: +* Calculate the total BW.A value of 0 isn't legal. +* +******************************************************************************/ +static int bnx2x_ets_e3b0_get_total_bw( + const struct link_params *params, + struct bnx2x_ets_params *ets_params, + u16 *total_bw) +{ + struct bnx2x *bp = params->bp; + u8 cos_idx = 0; + u8 is_bw_cos_exist = 0; + + *total_bw = 0 ; + /* Calculate total BW requested */ + for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { + if (ets_params->cos[cos_idx].state == bnx2x_cos_state_bw) { + is_bw_cos_exist = 1; + if (!ets_params->cos[cos_idx].params.bw_params.bw) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" + "was set to 0\n"); + /* This is to prevent a state when ramrods + * can't be sent + */ + ets_params->cos[cos_idx].params.bw_params.bw + = 1; + } + *total_bw += + ets_params->cos[cos_idx].params.bw_params.bw; + } + } + + /* Check total BW is valid */ + if ((is_bw_cos_exist == 1) && (*total_bw != 100)) { + if (*total_bw == 0) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config total BW shouldn't be 0\n"); + return -EINVAL; + } + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config total BW should be 100\n"); + /* We can handle a case whre the BW isn't 100 this can happen + * if the TC are joined. + */ + } + return 0; +} + +/****************************************************************************** +* Description: +* Invalidate all the sp_pri_to_cos. +* +******************************************************************************/ +static void bnx2x_ets_e3b0_sp_pri_to_cos_init(u8 *sp_pri_to_cos) +{ + u8 pri = 0; + for (pri = 0; pri < DCBX_MAX_NUM_COS; pri++) + sp_pri_to_cos[pri] = DCBX_INVALID_COS; +} +/****************************************************************************** +* Description: +* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers +* according to sp_pri_to_cos. +* +******************************************************************************/ +static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, + u8 *sp_pri_to_cos, const u8 pri, + const u8 cos_entry) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + + if (pri >= max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " + "parameter Illegal strict priority\n"); + return -EINVAL; + } + + if (sp_pri_to_cos[pri] != DCBX_INVALID_COS) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " + "parameter There can't be two COS's with " + "the same strict pri\n"); + return -EINVAL; + } + + sp_pri_to_cos[pri] = cos_entry; + return 0; + +} + +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in +* the sp_pri_cli register. +* +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg(const u8 cos, const u8 cos_offset, + const u8 pri_set, + const u8 pri_offset, + const u8 entry_size) +{ + u64 pri_cli_nig = 0; + pri_cli_nig = ((u64)(cos + cos_offset)) << (entry_size * + (pri_set + pri_offset)); + + return pri_cli_nig; +} +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in the +* sp_pri_cli register for NIG. +* +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg_nig(const u8 cos, const u8 pri_set) +{ + /* MCP Dbg0 and dbg1 are always with higher strict pri*/ + const u8 nig_cos_offset = 3; + const u8 nig_pri_offset = 3; + + return bnx2x_e3b0_sp_get_pri_cli_reg(cos, nig_cos_offset, pri_set, + nig_pri_offset, 4); + +} +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in the +* sp_pri_cli register for PBF. +* +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg_pbf(const u8 cos, const u8 pri_set) +{ + const u8 pbf_cos_offset = 0; + const u8 pbf_pri_offset = 0; + + return bnx2x_e3b0_sp_get_pri_cli_reg(cos, pbf_cos_offset, pri_set, + pbf_pri_offset, 3); + +} + +/****************************************************************************** +* Description: +* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers +* according to sp_pri_to_cos.(which COS has higher priority) +* +******************************************************************************/ +static int bnx2x_ets_e3b0_sp_set_pri_cli_reg(const struct link_params *params, + u8 *sp_pri_to_cos) +{ + struct bnx2x *bp = params->bp; + u8 i = 0; + const u8 port = params->port; + /* MCP Dbg0 and dbg1 are always with higher strict pri*/ + u64 pri_cli_nig = 0x210; + u32 pri_cli_pbf = 0x0; + u8 pri_set = 0; + u8 pri_bitmask = 0; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + + u8 cos_bit_to_set = (1 << max_num_of_cos) - 1; + + /* Set all the strict priority first */ + for (i = 0; i < max_num_of_cos; i++) { + if (sp_pri_to_cos[i] != DCBX_INVALID_COS) { + if (sp_pri_to_cos[i] >= DCBX_MAX_NUM_COS) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_sp_set_pri_cli_reg " + "invalid cos entry\n"); + return -EINVAL; + } + + pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( + sp_pri_to_cos[i], pri_set); + + pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( + sp_pri_to_cos[i], pri_set); + pri_bitmask = 1 << sp_pri_to_cos[i]; + /* COS is used remove it from bitmap.*/ + if (!(pri_bitmask & cos_bit_to_set)) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_sp_set_pri_cli_reg " + "invalid There can't be two COS's with" + " the same strict pri\n"); + return -EINVAL; + } + cos_bit_to_set &= ~pri_bitmask; + pri_set++; + } + } + + /* Set all the Non strict priority i= COS*/ + for (i = 0; i < max_num_of_cos; i++) { + pri_bitmask = 1 << i; + /* Check if COS was already used for SP */ + if (pri_bitmask & cos_bit_to_set) { + /* COS wasn't used for SP */ + pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( + i, pri_set); + + pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( + i, pri_set); + /* COS is used remove it from bitmap.*/ + cos_bit_to_set &= ~pri_bitmask; + pri_set++; + } + } + + if (pri_set != max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_set_pri_cli_reg not all " + "entries were set\n"); + return -EINVAL; + } + + if (port) { + /* Only 6 usable clients*/ + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, + (u32)pri_cli_nig); + + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , pri_cli_pbf); + } else { + /* Only 9 usable clients*/ + const u32 pri_cli_nig_lsb = (u32) (pri_cli_nig); + const u32 pri_cli_nig_msb = (u32) ((pri_cli_nig >> 32) & 0xF); + + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, + pri_cli_nig_lsb); + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, + pri_cli_nig_msb); + + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , pri_cli_pbf); + } + return 0; +} + +/****************************************************************************** +* Description: +* Configure the COS to ETS according to BW and SP settings. +******************************************************************************/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + struct bnx2x_ets_params *ets_params) +{ + struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + const u8 port = params->port; + u16 total_bw = 0; + const u32 min_w_val_nig = bnx2x_ets_get_min_w_val_nig(vars); + const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; + u8 cos_bw_bitmap = 0; + u8 cos_sp_bitmap = 0; + u8 sp_pri_to_cos[DCBX_MAX_NUM_COS] = {0}; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + u8 cos_entry = 0; + + if (!CHIP_IS_E3B0(bp)) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n"); + return -EINVAL; + } + + if ((ets_params->num_of_cos > max_num_of_cos)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config the number of COS " + "isn't supported\n"); + return -EINVAL; + } + + /* Prepare sp strict priority parameters*/ + bnx2x_ets_e3b0_sp_pri_to_cos_init(sp_pri_to_cos); + + /* Prepare BW parameters*/ + bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params, + &total_bw); + if (bnx2x_status) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config get_total_bw failed\n"); + return -EINVAL; + } + + /* Upper bound is set according to current link speed (min_w_val + * should be the same for upper bound and COS credit val). + */ + bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val_nig); + bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); + + + for (cos_entry = 0; cos_entry < ets_params->num_of_cos; cos_entry++) { + if (bnx2x_cos_state_bw == ets_params->cos[cos_entry].state) { + cos_bw_bitmap |= (1 << cos_entry); + /* The function also sets the BW in HW(not the mappin + * yet) + */ + bnx2x_status = bnx2x_ets_e3b0_set_cos_bw( + bp, cos_entry, min_w_val_nig, min_w_val_pbf, + total_bw, + ets_params->cos[cos_entry].params.bw_params.bw, + port); + } else if (bnx2x_cos_state_strict == + ets_params->cos[cos_entry].state){ + cos_sp_bitmap |= (1 << cos_entry); + + bnx2x_status = bnx2x_ets_e3b0_sp_pri_to_cos_set( + params, + sp_pri_to_cos, + ets_params->cos[cos_entry].params.sp_params.pri, + cos_entry); + + } else { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_config cos state not valid\n"); + return -EINVAL; + } + if (bnx2x_status) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_config set cos bw failed\n"); + return bnx2x_status; + } + } + + /* Set SP register (which COS has higher priority) */ + bnx2x_status = bnx2x_ets_e3b0_sp_set_pri_cli_reg(params, + sp_pri_to_cos); + + if (bnx2x_status) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config set_pri_cli_reg failed\n"); + return bnx2x_status; + } + + /* Set client mapping of BW and strict */ + bnx2x_status = bnx2x_ets_e3b0_cli_map(params, ets_params, + cos_sp_bitmap, + cos_bw_bitmap); + + if (bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config SP failed\n"); + return bnx2x_status; + } + return 0; +} +static void bnx2x_ets_bw_limit_common(const struct link_params *params) +{ + /* ETS disabled configuration */ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n"); + /* Defines which entries (clients) are subjected to WFQ arbitration + * COS0 0x8 + * COS1 0x10 + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0x18); + /* Mapping between the ARB_CREDIT_WEIGHT registers and actual + * client numbers (WEIGHT_0 does not actually have to represent + * client 0) + * PRI4 | PRI3 | PRI2 | PRI1 | PRI0 + * cos1-001 cos0-000 dbg1-100 dbg0-011 MCP-010 + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0x111A); + + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, + ETS_BW_LIMIT_CREDIT_UPPER_BOUND); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, + ETS_BW_LIMIT_CREDIT_UPPER_BOUND); + + /* ETS mode enabled*/ + REG_WR(bp, PBF_REG_ETS_ENABLED, 1); + + /* Defines the number of consecutive slots for the strict priority */ + REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0); + /* Bitmap of 5bits length. Each bit specifies whether the entry behaves + * as strict. Bits 0,1,2 - debug and management entries, 3 - COS0 + * entry, 4 - COS1 entry. + * COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT + * bit4 bit3 bit2 bit1 bit0 + * MCP and debug are strict + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7); + + /* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter.*/ + REG_WR(bp, PBF_REG_COS0_UPPER_BOUND, + ETS_BW_LIMIT_CREDIT_UPPER_BOUND); + REG_WR(bp, PBF_REG_COS1_UPPER_BOUND, + ETS_BW_LIMIT_CREDIT_UPPER_BOUND); +} + +void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, + const u32 cos1_bw) +{ + /* ETS disabled configuration*/ + struct bnx2x *bp = params->bp; + const u32 total_bw = cos0_bw + cos1_bw; + u32 cos0_credit_weight = 0; + u32 cos1_credit_weight = 0; + + DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n"); + + if ((!total_bw) || + (!cos0_bw) || + (!cos1_bw)) { + DP(NETIF_MSG_LINK, "Total BW can't be zero\n"); + return; + } + + cos0_credit_weight = (cos0_bw * ETS_BW_LIMIT_CREDIT_WEIGHT)/ + total_bw; + cos1_credit_weight = (cos1_bw * ETS_BW_LIMIT_CREDIT_WEIGHT)/ + total_bw; + + bnx2x_ets_bw_limit_common(params); + + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, cos0_credit_weight); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, cos1_credit_weight); + + REG_WR(bp, PBF_REG_COS0_WEIGHT, cos0_credit_weight); + REG_WR(bp, PBF_REG_COS1_WEIGHT, cos1_credit_weight); +} + +int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos) +{ + /* ETS disabled configuration*/ + struct bnx2x *bp = params->bp; + u32 val = 0; + + DP(NETIF_MSG_LINK, "ETS enabled strict configuration\n"); + /* Bitmap of 5bits length. Each bit specifies whether the entry behaves + * as strict. Bits 0,1,2 - debug and management entries, + * 3 - COS0 entry, 4 - COS1 entry. + * COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT + * bit4 bit3 bit2 bit1 bit0 + * MCP and debug are strict + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1F); + /* For strict priority entries defines the number of consecutive slots + * for the highest priority. + */ + REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); + /* ETS mode disable */ + REG_WR(bp, PBF_REG_ETS_ENABLED, 0); + /* Defines the number of consecutive slots for the strict priority */ + REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0x100); + + /* Defines the number of consecutive slots for the strict priority */ + REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, strict_cos); + + /* Mapping between entry priority to client number (0,1,2 -debug and + * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST) + * 3bits client num. + * PRI4 | PRI3 | PRI2 | PRI1 | PRI0 + * dbg0-010 dbg1-001 cos1-100 cos0-011 MCP-000 + * dbg0-010 dbg1-001 cos0-011 cos1-100 MCP-000 + */ + val = (!strict_cos) ? 0x2318 : 0x22E0; + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, val); + + return 0; +} + +/******************************************************************/ +/* PFC section */ +/******************************************************************/ +static void bnx2x_update_pfc_xmac(struct link_params *params, + struct link_vars *vars, + u8 is_lb) +{ + struct bnx2x *bp = params->bp; + u32 xmac_base; + u32 pause_val, pfc0_val, pfc1_val; + + /* XMAC base adrr */ + xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + /* Initialize pause and pfc registers */ + pause_val = 0x18000; + pfc0_val = 0xFFFF8000; + pfc1_val = 0x2; + + /* No PFC support */ + if (!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED)) { + + /* RX flow control - Process pause frame in receive direction + */ + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) + pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN; + + /* TX flow control - Send pause packet when buffer is full */ + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) + pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN; + } else {/* PFC support */ + pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN | + XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN | + XMAC_PFC_CTRL_HI_REG_RX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_TX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + /* Write pause and PFC registers */ + REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + pfc1_val &= ~XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + + } + + /* Write pause and PFC registers */ + REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + + + /* Set MAC address for source TX Pause/PFC frames */ + REG_WR(bp, xmac_base + XMAC_REG_CTRL_SA_LO, + ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + (params->mac_addr[5]))); + REG_WR(bp, xmac_base + XMAC_REG_CTRL_SA_HI, + ((params->mac_addr[0] << 8) | + (params->mac_addr[1]))); + + udelay(30); +} + +/******************************************************************/ +/* MAC/PBF section */ +/******************************************************************/ +static void bnx2x_set_mdio_clk(struct bnx2x *bp, u32 chip_id, + u32 emac_base) +{ + u32 new_mode, cur_mode; + u32 clc_cnt; + /* Set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + cur_mode = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + + if (USES_WARPCORE(bp)) + clc_cnt = 74L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT; + else + clc_cnt = 49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT; + + if (((cur_mode & EMAC_MDIO_MODE_CLOCK_CNT) == clc_cnt) && + (cur_mode & (EMAC_MDIO_MODE_CLAUSE_45))) + return; + + new_mode = cur_mode & + ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + new_mode |= clc_cnt; + new_mode |= (EMAC_MDIO_MODE_CLAUSE_45); + + DP(NETIF_MSG_LINK, "Changing emac_mode from 0x%x to 0x%x\n", + cur_mode, new_mode); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE, new_mode); + udelay(40); +} + +static void bnx2x_set_mdio_emac_per_phy(struct bnx2x *bp, + struct link_params *params) +{ + u8 phy_index; + /* Set mdio clock per phy */ + for (phy_index = INT_PHY; phy_index < params->num_phys; + phy_index++) + bnx2x_set_mdio_clk(bp, params->chip_id, + params->phy[phy_index].mdio_ctrl); +} + +static u8 bnx2x_is_4_port_mode(struct bnx2x *bp) +{ + u32 port4mode_ovwr_val; + /* Check 4-port override enabled */ + port4mode_ovwr_val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); + if (port4mode_ovwr_val & (1<<0)) { + /* Return 4-port mode override value */ + return ((port4mode_ovwr_val & (1<<1)) == (1<<1)); + } + /* Return 4-port mode from input pin */ + return (u8)REG_RD(bp, MISC_REG_PORT4MODE_EN); +} + +static void bnx2x_emac_init(struct link_params *params, + struct link_vars *vars) +{ + /* reset and unreset the emac core */ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u32 val; + u16 timeout; + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); + udelay(5); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); + + /* init emac - use read-modify-write */ + /* self clear reset */ + val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); + EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET)); + + timeout = 200; + do { + val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); + DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val); + if (!timeout) { + DP(NETIF_MSG_LINK, "EMAC timeout!\n"); + return; + } + timeout--; + } while (val & EMAC_MODE_RESET); + + bnx2x_set_mdio_emac_per_phy(bp, params); + /* Set mac address */ + val = ((params->mac_addr[0] << 8) | + params->mac_addr[1]); + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val); + + val = ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + params->mac_addr[5]); + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val); +} + +static void bnx2x_set_xumac_nig(struct link_params *params, + u16 tx_pause_en, + u8 enable) +{ + struct bnx2x *bp = params->bp; + + REG_WR(bp, params->port ? NIG_REG_P1_MAC_IN_EN : NIG_REG_P0_MAC_IN_EN, + enable); + REG_WR(bp, params->port ? NIG_REG_P1_MAC_OUT_EN : NIG_REG_P0_MAC_OUT_EN, + enable); + REG_WR(bp, params->port ? NIG_REG_P1_MAC_PAUSE_OUT_EN : + NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en); +} + +static void bnx2x_set_umac_rxtx(struct link_params *params, u8 en) +{ + u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + u32 val; + struct bnx2x *bp = params->bp; + if (!(REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port))) + return; + val = REG_RD(bp, umac_base + UMAC_REG_COMMAND_CONFIG); + if (en) + val |= (UMAC_COMMAND_CONFIG_REG_TX_ENA | + UMAC_COMMAND_CONFIG_REG_RX_ENA); + else + val &= ~(UMAC_COMMAND_CONFIG_REG_TX_ENA | + UMAC_COMMAND_CONFIG_REG_RX_ENA); + /* Disable RX and TX */ + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); +} + +static void bnx2x_umac_enable(struct link_params *params, + struct link_vars *vars, u8 lb) +{ + u32 val; + u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + struct bnx2x *bp = params->bp; + /* Reset UMAC */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); + usleep_range(1000, 2000); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); + + DP(NETIF_MSG_LINK, "enabling UMAC\n"); + + /* This register opens the gate for the UMAC despite its name */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1); + + val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN | + UMAC_COMMAND_CONFIG_REG_PAD_EN | + UMAC_COMMAND_CONFIG_REG_SW_RESET | + UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK; + switch (vars->line_speed) { + case SPEED_10: + val |= (0<<2); + break; + case SPEED_100: + val |= (1<<2); + break; + case SPEED_1000: + val |= (2<<2); + break; + case SPEED_2500: + val |= (3<<2); + break; + default: + DP(NETIF_MSG_LINK, "Invalid speed for UMAC %d\n", + vars->line_speed); + break; + } + if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE; + + if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) + val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE; + + if (vars->duplex == DUPLEX_HALF) + val |= UMAC_COMMAND_CONFIG_REG_HD_ENA; + + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); + udelay(50); + + /* Configure UMAC for EEE */ + if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) { + DP(NETIF_MSG_LINK, "configured UMAC for EEE\n"); + REG_WR(bp, umac_base + UMAC_REG_UMAC_EEE_CTRL, + UMAC_UMAC_EEE_CTRL_REG_EEE_EN); + REG_WR(bp, umac_base + UMAC_REG_EEE_WAKE_TIMER, 0x11); + } else { + REG_WR(bp, umac_base + UMAC_REG_UMAC_EEE_CTRL, 0x0); + } + + /* Set MAC address for source TX Pause/PFC frames (under SW reset) */ + REG_WR(bp, umac_base + UMAC_REG_MAC_ADDR0, + ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + (params->mac_addr[5]))); + REG_WR(bp, umac_base + UMAC_REG_MAC_ADDR1, + ((params->mac_addr[0] << 8) | + (params->mac_addr[1]))); + + /* Enable RX and TX */ + val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN; + val |= UMAC_COMMAND_CONFIG_REG_TX_ENA | + UMAC_COMMAND_CONFIG_REG_RX_ENA; + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); + udelay(50); + + /* Remove SW Reset */ + val &= ~UMAC_COMMAND_CONFIG_REG_SW_RESET; + + /* Check loopback mode */ + if (lb) + val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA; + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); + + /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame + * length used by the MAC receive logic to check frames. + */ + REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710); + bnx2x_set_xumac_nig(params, + ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); + vars->mac_type = MAC_TYPE_UMAC; + +} + +/* Define the XMAC mode */ +static void bnx2x_xmac_init(struct link_params *params, u32 max_speed) +{ + struct bnx2x *bp = params->bp; + u32 is_port4mode = bnx2x_is_4_port_mode(bp); + + /* In 4-port mode, need to set the mode only once, so if XMAC is + * already out of reset, it means the mode has already been set, + * and it must not* reset the XMAC again, since it controls both + * ports of the path + */ + + if (((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || + (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || + (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) && + is_port4mode && + (REG_RD(bp, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC)) { + DP(NETIF_MSG_LINK, + "XMAC already out of reset in 4-port mode\n"); + return; + } + + /* Hard reset */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + MISC_REGISTERS_RESET_REG_2_XMAC); + usleep_range(1000, 2000); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + MISC_REGISTERS_RESET_REG_2_XMAC); + if (is_port4mode) { + DP(NETIF_MSG_LINK, "Init XMAC to 2 ports x 10G per path\n"); + + /* Set the number of ports on the system side to up to 2 */ + REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 1); + + /* Set the number of ports on the Warp Core to 10G */ + REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); + } else { + /* Set the number of ports on the system side to 1 */ + REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0); + if (max_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, + "Init XMAC to 10G x 1 port per path\n"); + /* Set the number of ports on the Warp Core to 10G */ + REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); + } else { + DP(NETIF_MSG_LINK, + "Init XMAC to 20G x 2 ports per path\n"); + /* Set the number of ports on the Warp Core to 20G */ + REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1); + } + } + /* Soft reset */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); + usleep_range(1000, 2000); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); + +} + +static void bnx2x_set_xmac_rxtx(struct link_params *params, u8 en) +{ + u8 port = params->port; + struct bnx2x *bp = params->bp; + u32 pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + u32 val; + + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC) { + /* Send an indication to change the state in the NIG back to XON + * Clearing this bit enables the next set of this bit to get + * rising edge + */ + pfc_ctrl = REG_RD(bp, xmac_base + XMAC_REG_PFC_CTRL_HI); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, + (pfc_ctrl & ~(1<<1))); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, + (pfc_ctrl | (1<<1))); + DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port); + val = REG_RD(bp, xmac_base + XMAC_REG_CTRL); + if (en) + val |= (XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN); + else + val &= ~(XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN); + REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); + } +} + +static int bnx2x_xmac_enable(struct link_params *params, + struct link_vars *vars, u8 lb) +{ + u32 val, xmac_base; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "enabling XMAC\n"); + + xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + bnx2x_xmac_init(params, vars->line_speed); + + /* This register determines on which events the MAC will assert + * error on the i/f to the NIG along w/ EOP. + */ + + /* This register tells the NIG whether to send traffic to UMAC + * or XMAC + */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0); + + /* When XMAC is in XLGMII mode, disable sending idles for fault + * detection. + */ + if (!(params->phy[INT_PHY].flags & FLAGS_TX_ERROR_CHECK)) { + REG_WR(bp, xmac_base + XMAC_REG_RX_LSS_CTRL, + (XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE | + XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE)); + REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); + REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); + } + /* Set Max packet size */ + REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710); + + /* CRC append for Tx packets */ + REG_WR(bp, xmac_base + XMAC_REG_TX_CTRL, 0xC800); + + /* update PFC */ + bnx2x_update_pfc_xmac(params, vars, 0); + + if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) { + DP(NETIF_MSG_LINK, "Setting XMAC for EEE\n"); + REG_WR(bp, xmac_base + XMAC_REG_EEE_TIMERS_HI, 0x1380008); + REG_WR(bp, xmac_base + XMAC_REG_EEE_CTRL, 0x1); + } else { + REG_WR(bp, xmac_base + XMAC_REG_EEE_CTRL, 0x0); + } + + /* Enable TX and RX */ + val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN; + + /* Set MAC in XLGMII mode for dual-mode */ + if ((vars->line_speed == SPEED_20000) && + (params->phy[INT_PHY].supported & + SUPPORTED_20000baseKR2_Full)) + val |= XMAC_CTRL_REG_XLGMII_ALIGN_ENB; + + /* Check loopback mode */ + if (lb) + val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK; + REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); + bnx2x_set_xumac_nig(params, + ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); + + vars->mac_type = MAC_TYPE_XMAC; + + return 0; +} + +static int bnx2x_emac_enable(struct link_params *params, + struct link_vars *vars, u8 lb) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u32 val; + + DP(NETIF_MSG_LINK, "enabling EMAC\n"); + + /* Disable BMAC */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + + /* enable emac and not bmac */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1); + + /* ASIC */ + if (vars->phy_flags & PHY_XGXS_FLAG) { + u32 ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + DP(NETIF_MSG_LINK, "XGXS\n"); + /* select the master lanes (out of 0-3) */ + REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, ser_lane); + /* select XGXS */ + REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); + + } else { /* SerDes */ + DP(NETIF_MSG_LINK, "SerDes\n"); + /* select SerDes */ + REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0); + } + + bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE, + EMAC_RX_MODE_RESET); + bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, + EMAC_TX_MODE_RESET); + + /* pause enable/disable */ + bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE, + EMAC_RX_MODE_FLOW_EN); + + bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE, + (EMAC_TX_MODE_EXT_PAUSE_EN | + EMAC_TX_MODE_FLOW_EN)); + if (!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED)) { + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) + bnx2x_bits_en(bp, emac_base + + EMAC_REG_EMAC_RX_MODE, + EMAC_RX_MODE_FLOW_EN); + + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) + bnx2x_bits_en(bp, emac_base + + EMAC_REG_EMAC_TX_MODE, + (EMAC_TX_MODE_EXT_PAUSE_EN | + EMAC_TX_MODE_FLOW_EN)); + } else + bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, + EMAC_TX_MODE_FLOW_EN); + + /* KEEP_VLAN_TAG, promiscuous */ + val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); + val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; + + /* Setting this bit causes MAC control frames (except for pause + * frames) to be passed on for processing. This setting has no + * affect on the operation of the pause frames. This bit effects + * all packets regardless of RX Parser packet sorting logic. + * Turn the PFC off to make sure we are in Xon state before + * enabling it. + */ + EMAC_WR(bp, EMAC_REG_RX_PFC_MODE, 0); + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) { + DP(NETIF_MSG_LINK, "PFC is enabled\n"); + /* Enable PFC again */ + EMAC_WR(bp, EMAC_REG_RX_PFC_MODE, + EMAC_REG_RX_PFC_MODE_RX_EN | + EMAC_REG_RX_PFC_MODE_TX_EN | + EMAC_REG_RX_PFC_MODE_PRIORITIES); + + EMAC_WR(bp, EMAC_REG_RX_PFC_PARAM, + ((0x0101 << + EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) | + (0x00ff << + EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT))); + val |= EMAC_RX_MODE_KEEP_MAC_CONTROL; + } + EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val); + + /* Set Loopback */ + val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE); + if (lb) + val |= 0x810; + else + val &= ~0x810; + EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); + + /* Enable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); + + /* Enable emac for jumbo packets */ + EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, + (EMAC_RX_MTU_SIZE_JUMBO_ENA | + (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD))); + + /* Strip CRC */ + REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1); + + /* Disable the NIG in/out to the bmac */ + REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0); + REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0); + REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0); + + /* Enable the NIG in/out to the emac */ + REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1); + val = 0; + if ((params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val = 1; + + REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1); + + REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0); + + vars->mac_type = MAC_TYPE_EMAC; + return 0; +} + +static void bnx2x_update_pfc_bmac1(struct link_params *params, + struct link_vars *vars) +{ + u32 wb_data[2]; + struct bnx2x *bp = params->bp; + u32 bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + + u32 val = 0x14; + if ((!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED)) && + (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) + /* Enable BigMAC to react on received Pause packets */ + val |= (1<<5); + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_data, 2); + + /* TX control */ + val = 0xc0; + if (!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED) && + (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val |= 0x800000; + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_data, 2); +} + +static void bnx2x_update_pfc_bmac2(struct link_params *params, + struct link_vars *vars, + u8 is_lb) +{ + /* Set rx control: Strip CRC and enable BigMAC to relay + * control packets to the system as well + */ + u32 wb_data[2]; + struct bnx2x *bp = params->bp; + u32 bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 val = 0x14; + + if ((!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED)) && + (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) + /* Enable BigMAC to react on received Pause packets */ + val |= (1<<5); + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_CONTROL, wb_data, 2); + udelay(30); + + /* Tx control */ + val = 0xc0; + if (!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED) && + (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val |= 0x800000; + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2); + + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) { + DP(NETIF_MSG_LINK, "PFC is enabled\n"); + /* Enable PFC RX & TX & STATS and set 8 COS */ + wb_data[0] = 0x0; + wb_data[0] |= (1<<0); /* RX */ + wb_data[0] |= (1<<1); /* TX */ + wb_data[0] |= (1<<2); /* Force initial Xon */ + wb_data[0] |= (1<<3); /* 8 cos */ + wb_data[0] |= (1<<5); /* STATS */ + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, + wb_data, 2); + /* Clear the force Xon */ + wb_data[0] &= ~(1<<2); + } else { + DP(NETIF_MSG_LINK, "PFC is disabled\n"); + /* Disable PFC RX & TX & STATS and set 8 COS */ + wb_data[0] = 0x8; + wb_data[1] = 0; + } + + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, wb_data, 2); + + /* Set Time (based unit is 512 bit time) between automatic + * re-sending of PP packets amd enable automatic re-send of + * Per-Priroity Packet as long as pp_gen is asserted and + * pp_disable is low. + */ + val = 0x8000; + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + val |= (1<<16); /* enable automatic re-send */ + + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_PAUSE_CONTROL, + wb_data, 2); + + /* mac control */ + val = 0x3; /* Enable RX and TX */ + if (is_lb) { + val |= 0x4; /* Local loopback */ + DP(NETIF_MSG_LINK, "enable bmac loopback\n"); + } + /* When PFC enabled, Pass pause frames towards the NIG. */ + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + val |= ((1<<6)|(1<<5)); + + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); +} + +/****************************************************************************** +* Description: +* This function is needed because NIG ARB_CREDIT_WEIGHT_X are +* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. +******************************************************************************/ +static int bnx2x_pfc_nig_rx_priority_mask(struct bnx2x *bp, + u8 cos_entry, + u32 priority_mask, u8 port) +{ + u32 nig_reg_rx_priority_mask_add = 0; + + switch (cos_entry) { + case 0: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS0_PRIORITY_MASK : + NIG_REG_P0_RX_COS0_PRIORITY_MASK; + break; + case 1: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS1_PRIORITY_MASK : + NIG_REG_P0_RX_COS1_PRIORITY_MASK; + break; + case 2: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS2_PRIORITY_MASK : + NIG_REG_P0_RX_COS2_PRIORITY_MASK; + break; + case 3: + if (port) + return -EINVAL; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK; + break; + case 4: + if (port) + return -EINVAL; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK; + break; + case 5: + if (port) + return -EINVAL; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK; + break; + } + + REG_WR(bp, nig_reg_rx_priority_mask_add, priority_mask); + + return 0; +} +static void bnx2x_update_mng(struct link_params *params, u32 link_status) +{ + struct bnx2x *bp = params->bp; + + REG_WR(bp, params->shmem_base + + offsetof(struct shmem_region, + port_mb[params->port].link_status), link_status); +} + +static void bnx2x_update_link_attr(struct link_params *params, u32 link_attr) +{ + struct bnx2x *bp = params->bp; + + if (SHMEM2_HAS(bp, link_attr_sync)) + REG_WR(bp, params->shmem2_base + + offsetof(struct shmem2_region, + link_attr_sync[params->port]), link_attr); +} + +static void bnx2x_update_pfc_nig(struct link_params *params, + struct link_vars *vars, + struct bnx2x_nig_brb_pfc_port_params *nig_params) +{ + u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0; + u32 llfc_enable = 0, xcm_out_en = 0, hwpfc_enable = 0; + u32 pkt_priority_to_cos = 0; + struct bnx2x *bp = params->bp; + u8 port = params->port; + + int set_pfc = params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED; + DP(NETIF_MSG_LINK, "updating pfc nig parameters\n"); + + /* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set + * MAC control frames (that are not pause packets) + * will be forwarded to the XCM. + */ + xcm_mask = REG_RD(bp, port ? NIG_REG_LLH1_XCM_MASK : + NIG_REG_LLH0_XCM_MASK); + /* NIG params will override non PFC params, since it's possible to + * do transition from PFC to SAFC + */ + if (set_pfc) { + pause_enable = 0; + llfc_out_en = 0; + llfc_enable = 0; + if (CHIP_IS_E3(bp)) + ppp_enable = 0; + else + ppp_enable = 1; + xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : + NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); + xcm_out_en = 0; + hwpfc_enable = 1; + } else { + if (nig_params) { + llfc_out_en = nig_params->llfc_out_en; + llfc_enable = nig_params->llfc_enable; + pause_enable = nig_params->pause_enable; + } else /* Default non PFC mode - PAUSE */ + pause_enable = 1; + + xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : + NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); + xcm_out_en = 1; + } + + if (CHIP_IS_E3(bp)) + REG_WR(bp, port ? NIG_REG_BRB1_PAUSE_IN_EN : + NIG_REG_BRB0_PAUSE_IN_EN, pause_enable); + REG_WR(bp, port ? NIG_REG_LLFC_OUT_EN_1 : + NIG_REG_LLFC_OUT_EN_0, llfc_out_en); + REG_WR(bp, port ? NIG_REG_LLFC_ENABLE_1 : + NIG_REG_LLFC_ENABLE_0, llfc_enable); + REG_WR(bp, port ? NIG_REG_PAUSE_ENABLE_1 : + NIG_REG_PAUSE_ENABLE_0, pause_enable); + + REG_WR(bp, port ? NIG_REG_PPP_ENABLE_1 : + NIG_REG_PPP_ENABLE_0, ppp_enable); + + REG_WR(bp, port ? NIG_REG_LLH1_XCM_MASK : + NIG_REG_LLH0_XCM_MASK, xcm_mask); + + REG_WR(bp, port ? NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 : + NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7); + + /* Output enable for RX_XCM # IF */ + REG_WR(bp, port ? NIG_REG_XCM1_OUT_EN : + NIG_REG_XCM0_OUT_EN, xcm_out_en); + + /* HW PFC TX enable */ + REG_WR(bp, port ? NIG_REG_P1_HWPFC_ENABLE : + NIG_REG_P0_HWPFC_ENABLE, hwpfc_enable); + + if (nig_params) { + u8 i = 0; + pkt_priority_to_cos = nig_params->pkt_priority_to_cos; + + for (i = 0; i < nig_params->num_of_rx_cos_priority_mask; i++) + bnx2x_pfc_nig_rx_priority_mask(bp, i, + nig_params->rx_cos_priority_mask[i], port); + + REG_WR(bp, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 : + NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0, + nig_params->llfc_high_priority_classes); + + REG_WR(bp, port ? NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 : + NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0, + nig_params->llfc_low_priority_classes); + } + REG_WR(bp, port ? NIG_REG_P1_PKT_PRIORITY_TO_COS : + NIG_REG_P0_PKT_PRIORITY_TO_COS, + pkt_priority_to_cos); +} + +int bnx2x_update_pfc(struct link_params *params, + struct link_vars *vars, + struct bnx2x_nig_brb_pfc_port_params *pfc_params) +{ + /* The PFC and pause are orthogonal to one another, meaning when + * PFC is enabled, the pause are disabled, and when PFC is + * disabled, pause are set according to the pause result. + */ + u32 val; + struct bnx2x *bp = params->bp; + u8 bmac_loopback = (params->loopback_mode == LOOPBACK_BMAC); + + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + + bnx2x_update_mng(params, vars->link_status); + + /* Update NIG params */ + bnx2x_update_pfc_nig(params, vars, pfc_params); + + if (!vars->link_up) + return 0; + + DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n"); + + if (CHIP_IS_E3(bp)) { + if (vars->mac_type == MAC_TYPE_XMAC) + bnx2x_update_pfc_xmac(params, vars, 0); + } else { + val = REG_RD(bp, MISC_REG_RESET_REG_2); + if ((val & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) + == 0) { + DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n"); + bnx2x_emac_enable(params, vars, 0); + return 0; + } + if (CHIP_IS_E2(bp)) + bnx2x_update_pfc_bmac2(params, vars, bmac_loopback); + else + bnx2x_update_pfc_bmac1(params, vars); + + val = 0; + if ((params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val = 1; + REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val); + } + return 0; +} + +static int bnx2x_bmac1_enable(struct link_params *params, + struct link_vars *vars, + u8 is_lb) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 wb_data[2]; + u32 val; + + DP(NETIF_MSG_LINK, "Enabling BigMAC1\n"); + + /* XGXS control */ + wb_data[0] = 0x3c; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL, + wb_data, 2); + + /* TX MAC SA */ + wb_data[0] = ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + params->mac_addr[5]); + wb_data[1] = ((params->mac_addr[0] << 8) | + params->mac_addr[1]); + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, wb_data, 2); + + /* MAC control */ + val = 0x3; + if (is_lb) { + val |= 0x4; + DP(NETIF_MSG_LINK, "enable bmac loopback\n"); + } + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2); + + /* Set rx mtu */ + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_data, 2); + + bnx2x_update_pfc_bmac1(params, vars); + + /* Set tx mtu */ + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_data, 2); + + /* Set cnt max size */ + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, wb_data, 2); + + /* Configure SAFC */ + wb_data[0] = 0x1000200; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, + wb_data, 2); + + return 0; +} + +static int bnx2x_bmac2_enable(struct link_params *params, + struct link_vars *vars, + u8 is_lb) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 wb_data[2]; + + DP(NETIF_MSG_LINK, "Enabling BigMAC2\n"); + + wb_data[0] = 0; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); + udelay(30); + + /* XGXS control: Reset phy HW, MDIO registers, PHY PLL and BMAC */ + wb_data[0] = 0x3c; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_XGXS_CONTROL, + wb_data, 2); + + udelay(30); + + /* TX MAC SA */ + wb_data[0] = ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + params->mac_addr[5]); + wb_data[1] = ((params->mac_addr[0] << 8) | + params->mac_addr[1]); + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_SOURCE_ADDR, + wb_data, 2); + + udelay(30); + + /* Configure SAFC */ + wb_data[0] = 0x1000200; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS, + wb_data, 2); + udelay(30); + + /* Set RX MTU */ + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_MAX_SIZE, wb_data, 2); + udelay(30); + + /* Set TX MTU */ + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_MAX_SIZE, wb_data, 2); + udelay(30); + /* Set cnt max size */ + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD - 2; + wb_data[1] = 0; + REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_CNT_MAX_SIZE, wb_data, 2); + udelay(30); + bnx2x_update_pfc_bmac2(params, vars, is_lb); + + return 0; +} + +static int bnx2x_bmac_enable(struct link_params *params, + struct link_vars *vars, + u8 is_lb, u8 reset_bmac) +{ + int rc = 0; + u8 port = params->port; + struct bnx2x *bp = params->bp; + u32 val; + /* Reset and unreset the BigMac */ + if (reset_bmac) { + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + usleep_range(1000, 2000); + } + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + + /* Enable access for bmac registers */ + REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); + + /* Enable BMAC according to BMAC type*/ + if (CHIP_IS_E2(bp)) + rc = bnx2x_bmac2_enable(params, vars, is_lb); + else + rc = bnx2x_bmac1_enable(params, vars, is_lb); + REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1); + REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0); + val = 0; + if ((params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val = 1; + REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0); + REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0); + REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0); + REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1); + REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1); + + vars->mac_type = MAC_TYPE_BMAC; + return rc; +} + +static void bnx2x_set_bmac_rx(struct bnx2x *bp, u32 chip_id, u8 port, u8 en) +{ + u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 wb_data[2]; + u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4); + + if (CHIP_IS_E2(bp)) + bmac_addr += BIGMAC2_REGISTER_BMAC_CONTROL; + else + bmac_addr += BIGMAC_REGISTER_BMAC_CONTROL; + /* Only if the bmac is out of reset */ + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) && + nig_bmac_enable) { + /* Clear Rx Enable bit in BMAC_CONTROL register */ + REG_RD_DMAE(bp, bmac_addr, wb_data, 2); + if (en) + wb_data[0] |= BMAC_CONTROL_RX_ENABLE; + else + wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR_DMAE(bp, bmac_addr, wb_data, 2); + usleep_range(1000, 2000); + } +} + +static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, + u32 line_speed) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 init_crd, crd; + u32 count = 1000; + + /* Disable port */ + REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); + + /* Wait for init credit */ + init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4); + crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); + DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd); + + while ((init_crd != crd) && count) { + usleep_range(5000, 10000); + crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); + count--; + } + crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8); + if (init_crd != crd) { + DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n", + init_crd, crd); + return -EINVAL; + } + + if (flow_ctrl & BNX2X_FLOW_CTRL_RX || + line_speed == SPEED_10 || + line_speed == SPEED_100 || + line_speed == SPEED_1000 || + line_speed == SPEED_2500) { + REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1); + /* Update threshold */ + REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0); + /* Update init credit */ + init_crd = 778; /* (800-18-4) */ + + } else { + u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + + ETH_OVERHEAD)/16; + REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); + /* Update threshold */ + REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh); + /* Update init credit */ + switch (line_speed) { + case SPEED_10000: + init_crd = thresh + 553 - 22; + break; + default: + DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", + line_speed); + return -EINVAL; + } + } + REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd); + DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n", + line_speed, init_crd); + + /* Probe the credit changes */ + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1); + usleep_range(5000, 10000); + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0); + + /* Enable port */ + REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0); + return 0; +} + +/** + * bnx2x_get_emac_base - retrive emac base address + * + * @bp: driver handle + * @mdc_mdio_access: access type + * @port: port id + * + * This function selects the MDC/MDIO access (through emac0 or + * emac1) depend on the mdc_mdio_access, port, port swapped. Each + * phy has a default access mode, which could also be overridden + * by nvram configuration. This parameter, whether this is the + * default phy configuration, or the nvram overrun + * configuration, is passed here as mdc_mdio_access and selects + * the emac_base for the CL45 read/writes operations + */ +static u32 bnx2x_get_emac_base(struct bnx2x *bp, + u32 mdc_mdio_access, u8 port) +{ + u32 emac_base = 0; + switch (mdc_mdio_access) { + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE: + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0: + if (REG_RD(bp, NIG_REG_PORT_SWAP)) + emac_base = GRCBASE_EMAC1; + else + emac_base = GRCBASE_EMAC0; + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1: + if (REG_RD(bp, NIG_REG_PORT_SWAP)) + emac_base = GRCBASE_EMAC0; + else + emac_base = GRCBASE_EMAC1; + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH: + emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED: + emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1; + break; + default: + break; + } + return emac_base; + +} + +/******************************************************************/ +/* CL22 access functions */ +/******************************************************************/ +static int bnx2x_cl22_write(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 reg, u16 val) +{ + u32 tmp, mode; + u8 i; + int rc = 0; + /* Switch to CL22 */ + mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, + mode & ~EMAC_MDIO_MODE_CLAUSE_45); + + /* Address */ + tmp = ((phy->addr << 21) | (reg << 16) | val | + EMAC_MDIO_COMM_COMMAND_WRITE_22 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + udelay(10); + + tmp = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "write phy register failed\n"); + rc = -EFAULT; + } + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); + return rc; +} + +static int bnx2x_cl22_read(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 reg, u16 *ret_val) +{ + u32 val, mode; + u16 i; + int rc = 0; + + /* Switch to CL22 */ + mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, + mode & ~EMAC_MDIO_MODE_CLAUSE_45); + + /* Address */ + val = ((phy->addr << 21) | (reg << 16) | + EMAC_MDIO_COMM_COMMAND_READ_22 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + udelay(10); + + val = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA); + udelay(5); + break; + } + } + if (val & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "read phy register failed\n"); + + *ret_val = 0; + rc = -EFAULT; + } + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); + return rc; +} + +/******************************************************************/ +/* CL45 access functions */ +/******************************************************************/ +static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 *ret_val) +{ + u32 val; + u16 i; + int rc = 0; + u32 chip_id; + if (phy->flags & FLAGS_MDC_MDIO_WA_G) { + chip_id = (REG_RD(bp, MISC_REG_CHIP_NUM) << 16) | + ((REG_RD(bp, MISC_REG_CHIP_REV) & 0xf) << 12); + bnx2x_set_mdio_clk(bp, chip_id, phy->mdio_ctrl); + } + + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + /* Address */ + val = ((phy->addr << 21) | (devad << 16) | reg | + EMAC_MDIO_COMM_COMMAND_ADDRESS | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + udelay(10); + + val = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + if (val & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "read phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); + *ret_val = 0; + rc = -EFAULT; + } else { + /* Data */ + val = ((phy->addr << 21) | (devad << 16) | + EMAC_MDIO_COMM_COMMAND_READ_45 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + udelay(10); + + val = REG_RD(bp, phy->mdio_ctrl + + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA); + break; + } + } + if (val & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "read phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); + *ret_val = 0; + rc = -EFAULT; + } + } + /* Work around for E3 A0 */ + if (phy->flags & FLAGS_MDC_MDIO_WA) { + phy->flags ^= FLAGS_DUMMY_READ; + if (phy->flags & FLAGS_DUMMY_READ) { + u16 temp_val; + bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); + } + } + + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + return rc; +} + +static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 val) +{ + u32 tmp; + u8 i; + int rc = 0; + u32 chip_id; + if (phy->flags & FLAGS_MDC_MDIO_WA_G) { + chip_id = (REG_RD(bp, MISC_REG_CHIP_NUM) << 16) | + ((REG_RD(bp, MISC_REG_CHIP_REV) & 0xf) << 12); + bnx2x_set_mdio_clk(bp, chip_id, phy->mdio_ctrl); + } + + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + + /* Address */ + tmp = ((phy->addr << 21) | (devad << 16) | reg | + EMAC_MDIO_COMM_COMMAND_ADDRESS | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + udelay(10); + + tmp = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "write phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); + rc = -EFAULT; + } else { + /* Data */ + tmp = ((phy->addr << 21) | (devad << 16) | val | + EMAC_MDIO_COMM_COMMAND_WRITE_45 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + udelay(10); + + tmp = REG_RD(bp, phy->mdio_ctrl + + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "write phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); + rc = -EFAULT; + } + } + /* Work around for E3 A0 */ + if (phy->flags & FLAGS_MDC_MDIO_WA) { + phy->flags ^= FLAGS_DUMMY_READ; + if (phy->flags & FLAGS_DUMMY_READ) { + u16 temp_val; + bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); + } + } + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + return rc; +} + +/******************************************************************/ +/* EEE section */ +/******************************************************************/ +static u8 bnx2x_eee_has_cap(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + + if (REG_RD(bp, params->shmem2_base) <= + offsetof(struct shmem2_region, eee_status[params->port])) + return 0; + + return 1; +} + +static int bnx2x_eee_nvram_to_time(u32 nvram_mode, u32 *idle_timer) +{ + switch (nvram_mode) { + case PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED: + *idle_timer = EEE_MODE_NVRAM_BALANCED_TIME; + break; + case PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE: + *idle_timer = EEE_MODE_NVRAM_AGGRESSIVE_TIME; + break; + case PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY: + *idle_timer = EEE_MODE_NVRAM_LATENCY_TIME; + break; + default: + *idle_timer = 0; + break; + } + + return 0; +} + +static int bnx2x_eee_time_to_nvram(u32 idle_timer, u32 *nvram_mode) +{ + switch (idle_timer) { + case EEE_MODE_NVRAM_BALANCED_TIME: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED; + break; + case EEE_MODE_NVRAM_AGGRESSIVE_TIME: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE; + break; + case EEE_MODE_NVRAM_LATENCY_TIME: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY; + break; + default: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED; + break; + } + + return 0; +} + +static u32 bnx2x_eee_calc_timer(struct link_params *params) +{ + u32 eee_mode, eee_idle; + struct bnx2x *bp = params->bp; + + if (params->eee_mode & EEE_MODE_OVERRIDE_NVRAM) { + if (params->eee_mode & EEE_MODE_OUTPUT_TIME) { + /* time value in eee_mode --> used directly*/ + eee_idle = params->eee_mode & EEE_MODE_TIMER_MASK; + } else { + /* hsi value in eee_mode --> time */ + if (bnx2x_eee_nvram_to_time(params->eee_mode & + EEE_MODE_NVRAM_MASK, + &eee_idle)) + return 0; + } + } else { + /* hsi values in nvram --> time*/ + eee_mode = ((REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port]. + eee_power_mode)) & + PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >> + PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT); + + if (bnx2x_eee_nvram_to_time(eee_mode, &eee_idle)) + return 0; + } + + return eee_idle; +} + +static int bnx2x_eee_set_timers(struct link_params *params, + struct link_vars *vars) +{ + u32 eee_idle = 0, eee_mode; + struct bnx2x *bp = params->bp; + + eee_idle = bnx2x_eee_calc_timer(params); + + if (eee_idle) { + REG_WR(bp, MISC_REG_CPMU_LP_IDLE_THR_P0 + (params->port << 2), + eee_idle); + } else if ((params->eee_mode & EEE_MODE_ENABLE_LPI) && + (params->eee_mode & EEE_MODE_OVERRIDE_NVRAM) && + (params->eee_mode & EEE_MODE_OUTPUT_TIME)) { + DP(NETIF_MSG_LINK, "Error: Tx LPI is enabled with timer 0\n"); + return -EINVAL; + } + + vars->eee_status &= ~(SHMEM_EEE_TIMER_MASK | SHMEM_EEE_TIME_OUTPUT_BIT); + if (params->eee_mode & EEE_MODE_OUTPUT_TIME) { + /* eee_idle in 1u --> eee_status in 16u */ + eee_idle >>= 4; + vars->eee_status |= (eee_idle & SHMEM_EEE_TIMER_MASK) | + SHMEM_EEE_TIME_OUTPUT_BIT; + } else { + if (bnx2x_eee_time_to_nvram(eee_idle, &eee_mode)) + return -EINVAL; + vars->eee_status |= eee_mode; + } + + return 0; +} + +static int bnx2x_eee_initial_config(struct link_params *params, + struct link_vars *vars, u8 mode) +{ + vars->eee_status |= ((u32) mode) << SHMEM_EEE_SUPPORTED_SHIFT; + + /* Propagate params' bits --> vars (for migration exposure) */ + if (params->eee_mode & EEE_MODE_ENABLE_LPI) + vars->eee_status |= SHMEM_EEE_LPI_REQUESTED_BIT; + else + vars->eee_status &= ~SHMEM_EEE_LPI_REQUESTED_BIT; + + if (params->eee_mode & EEE_MODE_ADV_LPI) + vars->eee_status |= SHMEM_EEE_REQUESTED_BIT; + else + vars->eee_status &= ~SHMEM_EEE_REQUESTED_BIT; + + return bnx2x_eee_set_timers(params, vars); +} + +static int bnx2x_eee_disable(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + + /* Make Certain LPI is disabled */ + REG_WR(bp, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2), 0); + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, 0x0); + + vars->eee_status &= ~SHMEM_EEE_ADV_STATUS_MASK; + + return 0; +} + +static int bnx2x_eee_advertise(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, u8 modes) +{ + struct bnx2x *bp = params->bp; + u16 val = 0; + + /* Mask events preventing LPI generation */ + REG_WR(bp, MISC_REG_CPMU_LP_MASK_EXT_P0 + (params->port << 2), 0xfc20); + + if (modes & SHMEM_EEE_10G_ADV) { + DP(NETIF_MSG_LINK, "Advertise 10GBase-T EEE\n"); + val |= 0x8; + } + if (modes & SHMEM_EEE_1G_ADV) { + DP(NETIF_MSG_LINK, "Advertise 1GBase-T EEE\n"); + val |= 0x4; + } + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, val); + + vars->eee_status &= ~SHMEM_EEE_ADV_STATUS_MASK; + vars->eee_status |= (modes << SHMEM_EEE_ADV_STATUS_SHIFT); + + return 0; +} + +static void bnx2x_update_mng_eee(struct link_params *params, u32 eee_status) +{ + struct bnx2x *bp = params->bp; + + if (bnx2x_eee_has_cap(params)) + REG_WR(bp, params->shmem2_base + + offsetof(struct shmem2_region, + eee_status[params->port]), eee_status); +} + +static void bnx2x_eee_an_resolve(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 adv = 0, lp = 0; + u32 lp_adv = 0; + u8 neg = 0; + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, &adv); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LP_EEE_ADV, &lp); + + if (lp & 0x2) { + lp_adv |= SHMEM_EEE_100M_ADV; + if (adv & 0x2) { + if (vars->line_speed == SPEED_100) + neg = 1; + DP(NETIF_MSG_LINK, "EEE negotiated - 100M\n"); + } + } + if (lp & 0x14) { + lp_adv |= SHMEM_EEE_1G_ADV; + if (adv & 0x14) { + if (vars->line_speed == SPEED_1000) + neg = 1; + DP(NETIF_MSG_LINK, "EEE negotiated - 1G\n"); + } + } + if (lp & 0x68) { + lp_adv |= SHMEM_EEE_10G_ADV; + if (adv & 0x68) { + if (vars->line_speed == SPEED_10000) + neg = 1; + DP(NETIF_MSG_LINK, "EEE negotiated - 10G\n"); + } + } + + vars->eee_status &= ~SHMEM_EEE_LP_ADV_STATUS_MASK; + vars->eee_status |= (lp_adv << SHMEM_EEE_LP_ADV_STATUS_SHIFT); + + if (neg) { + DP(NETIF_MSG_LINK, "EEE is active\n"); + vars->eee_status |= SHMEM_EEE_ACTIVE_BIT; + } + +} + +/******************************************************************/ +/* BSC access functions from E3 */ +/******************************************************************/ +static void bnx2x_bsc_module_sel(struct link_params *params) +{ + int idx; + u32 board_cfg, sfp_ctrl; + u32 i2c_pins[I2C_SWITCH_WIDTH], i2c_val[I2C_SWITCH_WIDTH]; + struct bnx2x *bp = params->bp; + u8 port = params->port; + /* Read I2C output PINs */ + board_cfg = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.shared_hw_config.board)); + i2c_pins[I2C_BSC0] = board_cfg & SHARED_HW_CFG_E3_I2C_MUX0_MASK; + i2c_pins[I2C_BSC1] = (board_cfg & SHARED_HW_CFG_E3_I2C_MUX1_MASK) >> + SHARED_HW_CFG_E3_I2C_MUX1_SHIFT; + + /* Read I2C output value */ + sfp_ctrl = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)); + i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0; + i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0; + DP(NETIF_MSG_LINK, "Setting BSC switch\n"); + for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++) + bnx2x_set_cfg_pin(bp, i2c_pins[idx], i2c_val[idx]); +} + +static int bnx2x_bsc_read(struct link_params *params, + struct bnx2x *bp, + u8 sl_devid, + u16 sl_addr, + u8 lc_addr, + u8 xfer_cnt, + u32 *data_array) +{ + u32 val, i; + int rc = 0; + + if (xfer_cnt > 16) { + DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n", + xfer_cnt); + return -EINVAL; + } + bnx2x_bsc_module_sel(params); + + xfer_cnt = 16 - lc_addr; + + /* Enable the engine */ + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + val |= MCPR_IMC_COMMAND_ENABLE; + REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); + + /* Program slave device ID */ + val = (sl_devid << 16) | sl_addr; + REG_WR(bp, MCP_REG_MCPR_IMC_SLAVE_CONTROL, val); + + /* Start xfer with 0 byte to update the address pointer ???*/ + val = (MCPR_IMC_COMMAND_ENABLE) | + (MCPR_IMC_COMMAND_WRITE_OP << + MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | + (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0); + REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); + + /* Poll for completion */ + i = 0; + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { + udelay(10); + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + if (i++ > 1000) { + DP(NETIF_MSG_LINK, "wr 0 byte timed out after %d try\n", + i); + rc = -EFAULT; + break; + } + } + if (rc == -EFAULT) + return rc; + + /* Start xfer with read op */ + val = (MCPR_IMC_COMMAND_ENABLE) | + (MCPR_IMC_COMMAND_READ_OP << + MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | + (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | + (xfer_cnt); + REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); + + /* Poll for completion */ + i = 0; + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { + udelay(10); + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + if (i++ > 1000) { + DP(NETIF_MSG_LINK, "rd op timed out after %d try\n", i); + rc = -EFAULT; + break; + } + } + if (rc == -EFAULT) + return rc; + + for (i = (lc_addr >> 2); i < 4; i++) { + data_array[i] = REG_RD(bp, (MCP_REG_MCPR_IMC_DATAREG0 + i*4)); +#ifdef __BIG_ENDIAN + data_array[i] = ((data_array[i] & 0x000000ff) << 24) | + ((data_array[i] & 0x0000ff00) << 8) | + ((data_array[i] & 0x00ff0000) >> 8) | + ((data_array[i] & 0xff000000) >> 24); +#endif + } + return rc; +} + +static void bnx2x_cl45_read_or_write(struct bnx2x *bp, struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 or_val) +{ + u16 val; + bnx2x_cl45_read(bp, phy, devad, reg, &val); + bnx2x_cl45_write(bp, phy, devad, reg, val | or_val); +} + +static void bnx2x_cl45_read_and_write(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 and_val) +{ + u16 val; + bnx2x_cl45_read(bp, phy, devad, reg, &val); + bnx2x_cl45_write(bp, phy, devad, reg, val & and_val); +} + +int bnx2x_phy_read(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 *ret_val) +{ + u8 phy_index; + /* Probe for the phy according to the given phy_addr, and execute + * the read request on it + */ + for (phy_index = 0; phy_index < params->num_phys; phy_index++) { + if (params->phy[phy_index].addr == phy_addr) { + return bnx2x_cl45_read(params->bp, + ¶ms->phy[phy_index], devad, + reg, ret_val); + } + } + return -EINVAL; +} + +int bnx2x_phy_write(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 val) +{ + u8 phy_index; + /* Probe for the phy according to the given phy_addr, and execute + * the write request on it + */ + for (phy_index = 0; phy_index < params->num_phys; phy_index++) { + if (params->phy[phy_index].addr == phy_addr) { + return bnx2x_cl45_write(params->bp, + ¶ms->phy[phy_index], devad, + reg, val); + } + } + return -EINVAL; +} +static u8 bnx2x_get_warpcore_lane(struct bnx2x_phy *phy, + struct link_params *params) +{ + u8 lane = 0; + struct bnx2x *bp = params->bp; + u32 path_swap, path_swap_ovr; + u8 path, port; + + path = BP_PATH(bp); + port = params->port; + + if (bnx2x_is_4_port_mode(bp)) { + u32 port_swap, port_swap_ovr; + + /* Figure out path swap value */ + path_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP_OVWR); + if (path_swap_ovr & 0x1) + path_swap = (path_swap_ovr & 0x2); + else + path_swap = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP); + + if (path_swap) + path = path ^ 1; + + /* Figure out port swap value */ + port_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP_OVWR); + if (port_swap_ovr & 0x1) + port_swap = (port_swap_ovr & 0x2); + else + port_swap = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP); + + if (port_swap) + port = port ^ 1; + + lane = (port<<1) + path; + } else { /* Two port mode - no port swap */ + + /* Figure out path swap value */ + path_swap_ovr = + REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP_OVWR); + if (path_swap_ovr & 0x1) { + path_swap = (path_swap_ovr & 0x2); + } else { + path_swap = + REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP); + } + if (path_swap) + path = path ^ 1; + + lane = path << 1 ; + } + return lane; +} + +static void bnx2x_set_aer_mmd(struct link_params *params, + struct bnx2x_phy *phy) +{ + u32 ser_lane; + u16 offset, aer_val; + struct bnx2x *bp = params->bp; + ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + offset = (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ? + (phy->addr + ser_lane) : 0; + + if (USES_WARPCORE(bp)) { + aer_val = bnx2x_get_warpcore_lane(phy, params); + /* In Dual-lane mode, two lanes are joined together, + * so in order to configure them, the AER broadcast method is + * used here. + * 0x200 is the broadcast address for lanes 0,1 + * 0x201 is the broadcast address for lanes 2,3 + */ + if (phy->flags & FLAGS_WC_DUAL_MODE) + aer_val = (aer_val >> 1) | 0x200; + } else if (CHIP_IS_E2(bp)) + aer_val = 0x3800 + offset - 1; + else + aer_val = 0x3800 + offset; + + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, aer_val); + +} + +/******************************************************************/ +/* Internal phy section */ +/******************************************************************/ + +static void bnx2x_set_serdes_access(struct bnx2x *bp, u8 port) +{ + u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + /* Set Clause 22 */ + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 1); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); + udelay(500); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); + udelay(500); + /* Set Clause 45 */ + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 0); +} + +static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) +{ + u32 val; + + DP(NETIF_MSG_LINK, "bnx2x_serdes_deassert\n"); + + val = SERDES_RESET_BITS << (port*16); + + /* Reset and unreset the SerDes/XGXS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); + udelay(500); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); + + bnx2x_set_serdes_access(bp, port); + + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD + port*0x10, + DEFAULT_PHY_DEV_ADDR); +} + +static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + switch (action) { + case PHY_INIT: + /* Set correct devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, + phy->def_md_devad); + break; + } +} + +static void bnx2x_xgxs_deassert(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 port; + u32 val; + DP(NETIF_MSG_LINK, "bnx2x_xgxs_deassert\n"); + port = params->port; + + val = XGXS_RESET_BITS << (port*16); + + /* Reset and unreset the SerDes/XGXS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); + udelay(500); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); + bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params, + PHY_INIT); +} + +static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, + struct link_params *params, u16 *ieee_fc) +{ + struct bnx2x *bp = params->bp; + *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + /* Resolve pause mode and advertisement Please refer to Table + * 28B-3 of the 802.3ab-1999 spec + */ + + switch (phy->req_flow_ctrl) { + case BNX2X_FLOW_CTRL_AUTO: + switch (params->req_fc_auto_adv) { + case BNX2X_FLOW_CTRL_BOTH: + case BNX2X_FLOW_CTRL_RX: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + break; + case BNX2X_FLOW_CTRL_TX: + *ieee_fc |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + default: + break; + } + break; + case BNX2X_FLOW_CTRL_TX: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + + case BNX2X_FLOW_CTRL_RX: + case BNX2X_FLOW_CTRL_BOTH: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + break; + + case BNX2X_FLOW_CTRL_NONE: + default: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + break; + } + DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc); +} + +static void set_phy_vars(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 actual_phy_idx, phy_index, link_cfg_idx; + u8 phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + for (phy_index = INT_PHY; phy_index < params->num_phys; + phy_index++) { + link_cfg_idx = LINK_CONFIG_IDX(phy_index); + actual_phy_idx = phy_index; + if (phy_config_swapped) { + if (phy_index == EXT_PHY1) + actual_phy_idx = EXT_PHY2; + else if (phy_index == EXT_PHY2) + actual_phy_idx = EXT_PHY1; + } + params->phy[actual_phy_idx].req_flow_ctrl = + params->req_flow_ctrl[link_cfg_idx]; + + params->phy[actual_phy_idx].req_line_speed = + params->req_line_speed[link_cfg_idx]; + + params->phy[actual_phy_idx].speed_cap_mask = + params->speed_cap_mask[link_cfg_idx]; + + params->phy[actual_phy_idx].req_duplex = + params->req_duplex[link_cfg_idx]; + + if (params->req_line_speed[link_cfg_idx] == + SPEED_AUTO_NEG) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; + + DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x," + " speed_cap_mask %x\n", + params->phy[actual_phy_idx].req_flow_ctrl, + params->phy[actual_phy_idx].req_line_speed, + params->phy[actual_phy_idx].speed_cap_mask); + } +} + +static void bnx2x_ext_phy_set_pause(struct link_params *params, + struct bnx2x_phy *phy, + struct link_vars *vars) +{ + u16 val; + struct bnx2x *bp = params->bp; + /* Read modify write pause advertizing */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); + + val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; + + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + } + DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); +} + +static void bnx2x_pause_resolve(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u32 pause_result) +{ + struct bnx2x *bp = params->bp; + /* LD LP */ + switch (pause_result) { /* ASYM P ASYM P */ + case 0xb: /* 1 0 1 1 */ + DP(NETIF_MSG_LINK, "Flow Control: TX only\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; + break; + + case 0xe: /* 1 1 1 0 */ + DP(NETIF_MSG_LINK, "Flow Control: RX only\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; + break; + + case 0x5: /* 0 1 0 1 */ + case 0x7: /* 0 1 1 1 */ + case 0xd: /* 1 1 0 1 */ + case 0xf: /* 1 1 1 1 */ + /* If the user selected to advertise RX ONLY, + * although we advertised both, need to enable + * RX only. + */ + if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) { + DP(NETIF_MSG_LINK, "Flow Control: RX & TX\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; + } else { + DP(NETIF_MSG_LINK, "Flow Control: RX only\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; + } + break; + + default: + DP(NETIF_MSG_LINK, "Flow Control: None\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + break; + } + if (pause_result & (1<<0)) + vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE; + if (pause_result & (1<<1)) + vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE; + +} + +static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + u16 pause_result; + struct bnx2x *bp = params->bp; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) { + bnx2x_cl22_read(bp, phy, 0x4, &ld_pause); + bnx2x_cl22_read(bp, phy, 0x5, &lp_pause); + } else if (CHIP_IS_E3(bp) && + SINGLE_MEDIA_DIRECT(params)) { + u8 lane = bnx2x_get_warpcore_lane(phy, params); + u16 gp_status, gp_mask; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status); + gp_mask = (MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL | + MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP) << + lane; + if ((gp_status & gp_mask) == gp_mask) { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } else { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + ld_pause = ((ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + lp_pause = ((lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + } + } else { + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } + pause_result = (ld_pause & + MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", pause_result); + bnx2x_pause_resolve(phy, params, vars, pause_result); + +} + +static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u8 ret = 0; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) { + /* Update the advertised flow-controled of LD/LP in AN */ + if (phy->req_line_speed == SPEED_AUTO_NEG) + bnx2x_ext_phy_update_adv_fc(phy, params, vars); + /* But set the flow-control result as the requested one */ + vars->flow_ctrl = phy->req_flow_ctrl; + } else if (phy->req_line_speed != SPEED_AUTO_NEG) + vars->flow_ctrl = params->req_fc_auto_adv; + else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + ret = 1; + bnx2x_ext_phy_update_adv_fc(phy, params, vars); + } + return ret; +} +/******************************************************************/ +/* Warpcore section */ +/******************************************************************/ +/* The init_internal_warpcore should mirror the xgxs, + * i.e. reset the lane (if needed), set aer for the + * init configuration, and set/clear SGMII flag. Internal + * phy init is done purely in phy_init stage. + */ +#define WC_TX_DRIVER(post2, idriver, ipre, ifir) \ + ((post2 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | \ + (idriver << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | \ + (ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET) | \ + (ifir << MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET)) + +#define WC_TX_FIR(post, main, pre) \ + ((post << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | \ + (main << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | \ + (pre << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)) + +static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0xa157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xcbe2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0x7537}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0xa157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xcbe2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0x7537}, + /* Step 2 - Configure the NP registers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000a}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6400}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0620}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x6464}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x3150}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x3150}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620} + }; + DP(NETIF_MSG_LINK, "Enabling 20G-KR2\n"); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL49_USERB0_CTRL, (3<<6)); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + /* Start KR2 work-around timer which handles BCM8073 link-parner */ + params->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, params->link_attr_sync); +} + +static void bnx2x_disable_kr2(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + int i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} + }; + DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + params->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, params->link_attr_sync); + + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; +} + +static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + + DP(NETIF_MSG_LINK, "Configure WC for LPI pass through\n"); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_EEE_COMBO_CONTROL0, 0x7c); + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC5, 0xc000); +} + +static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy, + struct link_params *params) +{ + /* Restart autoneg on the leading lane only */ + struct bnx2x *bp = params->bp; + u16 lane = bnx2x_get_warpcore_lane(phy, params); + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200); + + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); +} + +static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { + u16 lane, i, cl72_ctrl, an_adv = 0, val; + u32 wc_lane_config; + struct bnx2x *bp = params->bp; + static struct bnx2x_reg_set reg_set[] = { + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, + {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190}, + /* Disable Autoneg: re-enable it after adv is done. */ + {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0}, + {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0}, + }; + DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); + /* Set to default registers that may be overriden by 10G force */ + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl); + cl72_ctrl &= 0x08ff; + cl72_ctrl |= 0x3800; + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl); + + /* Check adding advertisement for 1G KX */ + if (((vars->line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (vars->line_speed == SPEED_1000)) { + u16 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; + an_adv |= (1<<5); + + /* Enable CL37 1G Parallel Detect */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1); + DP(NETIF_MSG_LINK, "Advertize 1G\n"); + } + if (((vars->line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (vars->line_speed == SPEED_10000)) { + /* Check adding advertisement for 10G KR */ + an_adv |= (1<<7); + /* Enable 10G Parallel Detect */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_PAR_DET_10G_CTRL, 1); + bnx2x_set_aer_mmd(params, phy); + DP(NETIF_MSG_LINK, "Advertize 10G\n"); + } + + /* Set Transmit PMD settings */ + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + WC_TX_DRIVER(0x02, 0x06, 0x09, 0)); + /* Configure the next lane if dual mode */ + if (phy->flags & FLAGS_WC_DUAL_MODE) + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*(lane+1), + WC_TX_DRIVER(0x02, 0x06, 0x09, 0)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, + 0x03f0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL, + 0x03f0); + + /* Advertised speeds */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv); + + /* Advertised and set FEC (Forward Error Correction) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2, + (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY | + MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ)); + + /* Enable CL37 BAM */ + if (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, + 1); + DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n"); + } + + /* Advertise pause */ + bnx2x_ext_phy_set_pause(params, phy, vars); + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC7, 0x100); + + /* Over 1G - AN local device user page 1 */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL3_UP1, 0x1f); + + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) || + (phy->req_line_speed == SPEED_20000)) { + + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX1_PCI_CTRL + (0x10*lane), + (1<<11)); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7); + bnx2x_set_aer_mmd(params, phy); + + bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + } else { + /* Enable Auto-Detect to support 1G over CL37 as well */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10); + wc_lane_config = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + shared_hw_config.wc_lane_config)); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), &val); + /* Force cl48 sync_status LOW to avoid getting stuck in CL73 + * parallel-detect loop when CL73 and CL37 are enabled. + */ + val |= 1 << 11; + + /* Restore Polarity settings in case it was run over by + * previous link owner + */ + if (wc_lane_config & + (SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED << lane)) + val |= 3 << 2; + else + val &= ~(3 << 2); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), + val); + + bnx2x_disable_kr2(params, vars, phy); + } + + /* Enable Autoneg: only on the main lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); +} + +static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val16, i, lane; + static struct bnx2x_reg_set reg_set[] = { + /* Disable Autoneg */ + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, + 0x3f00}, + {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0}, + {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1}, + {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa}, + /* Leave cl72 training enable, needed for KR */ + {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2} + }; + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + lane = bnx2x_get_warpcore_lane(phy, params); + /* Global registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 &= ~(0x0011 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 |= (0x0303 << (lane << 1)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); + /* Set speed via PMA/PMD register */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); + + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0xB); + + /* Enable encoded forced speed */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30); + + /* Turn TX scramble payload only the 64/66 scrambler */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX66_CONTROL, 0x9); + + /* Turn RX scramble payload only the 64/66 scrambler */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, 0xF9); + + /* Set and clear loopback to cause a reset to 64/66 decoder */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x4000); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0); + +} + +static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, + struct link_params *params, + u8 is_xfi) +{ + struct bnx2x *bp = params->bp; + u16 misc1_val, tap_val, tx_driver_val, lane, val; + u32 cfg_tap_val, tx_drv_brdct, tx_equal; + u32 ifir_val, ipost2_val, ipre_driver_val; + + /* Hold rxSeqStart */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x8000); + + /* Hold tx_fifo_reset */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, 0x1); + + /* Disable CL73 AN */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); + + /* Disable 100FX Enable and Auto-Detect */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL1, 0xFFFA); + + /* Disable 100FX Idle detect */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL3, 0x0080); + + /* Set Block address to Remote PHY & Clear forced_speed[5] */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0xFF7F); + + /* Turn off auto-detect & fiber mode */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + 0xFFEE); + + /* Set filter_force_link, disable_false_link and parallel_detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + ((val | 0x0006) & 0xFFFE)); + + /* Set XFI / SFI */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, &misc1_val); + + misc1_val &= ~(0x1f); + + if (is_xfi) { + misc1_val |= 0x5; + tap_val = WC_TX_FIR(0x08, 0x37, 0x00); + tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03, 0); + } else { + cfg_tap_val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port]. + sfi_tap_values)); + + tx_equal = cfg_tap_val & PORT_HW_CFG_TX_EQUALIZATION_MASK; + + misc1_val |= 0x9; + + /* TAP values are controlled by nvram, if value there isn't 0 */ + if (tx_equal) + tap_val = (u16)tx_equal; + else + tap_val = WC_TX_FIR(0x0f, 0x2b, 0x02); + + ifir_val = DEFAULT_TX_DRV_IFIR; + ipost2_val = DEFAULT_TX_DRV_POST2; + ipre_driver_val = DEFAULT_TX_DRV_IPRE_DRIVER; + tx_drv_brdct = DEFAULT_TX_DRV_BRDCT; + + /* If any of the IFIR/IPRE_DRIVER/POST@ is set, apply all + * configuration. + */ + if (cfg_tap_val & (PORT_HW_CFG_TX_DRV_IFIR_MASK | + PORT_HW_CFG_TX_DRV_IPREDRIVER_MASK | + PORT_HW_CFG_TX_DRV_POST2_MASK)) { + ifir_val = (cfg_tap_val & + PORT_HW_CFG_TX_DRV_IFIR_MASK) >> + PORT_HW_CFG_TX_DRV_IFIR_SHIFT; + ipre_driver_val = (cfg_tap_val & + PORT_HW_CFG_TX_DRV_IPREDRIVER_MASK) + >> PORT_HW_CFG_TX_DRV_IPREDRIVER_SHIFT; + ipost2_val = (cfg_tap_val & + PORT_HW_CFG_TX_DRV_POST2_MASK) >> + PORT_HW_CFG_TX_DRV_POST2_SHIFT; + } + + if (cfg_tap_val & PORT_HW_CFG_TX_DRV_BROADCAST_MASK) { + tx_drv_brdct = (cfg_tap_val & + PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >> + PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT; + } + + tx_driver_val = WC_TX_DRIVER(ipost2_val, tx_drv_brdct, + ipre_driver_val, ifir_val); + } + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); + + /* Set Transmit PMD settings */ + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, + tap_val | MDIO_WC_REG_TX_FIR_TAP_ENABLE); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + tx_driver_val); + + /* Enable fiber mode, enable and invert sig_det */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0xd); + + /* Set Block address to Remote PHY & Set forced_speed[5], 40bit mode */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0x8080); + + bnx2x_warpcore_set_lpi_passthrough(phy, params); + + /* 10G XFI Full Duplex */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x100); + + /* Release tx_fifo_reset */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, + 0xFFFE); + /* Release rxSeqStart */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x7FFF); +} + +static void bnx2x_warpcore_set_20G_force_KR2(struct bnx2x_phy *phy, + struct link_params *params) +{ + u16 val; + struct bnx2x *bp = params->bp; + /* Set global registers, so set AER lane to 0 */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + /* Disable sequencer */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~(1<<13)); + + bnx2x_set_aer_mmd(params, phy); + + bnx2x_cl45_read_and_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_PMD_KR_CONTROL, ~(1<<1)); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CTRL, 0); + /* Turn off CL73 */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL73_USERB0_CTRL, &val); + val &= ~(1<<5); + val |= (1<<6); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL73_USERB0_CTRL, val); + + /* Set 20G KR2 force speed */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x1f); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, (1<<7)); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &val); + val &= ~(3<<14); + val |= (1<<15); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0x835A); + + /* Enable sequencer (over lane 0) */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, (1<<13)); + + bnx2x_set_aer_mmd(params, phy); +} + +static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 lane) +{ + /* Rx0 anaRxControl1G */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_ANARXCONTROL1G, 0x90); + + /* Rx2 anaRxControl1G */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX2_ANARXCONTROL1G, 0x90); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW0, 0xE070); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW1, 0xC0D0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW2, 0xA0B0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW3, 0x8090); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW0_MASK, 0xF0F0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW1_MASK, 0xF0F0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW2_MASK, 0xF0F0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW3_MASK, 0xF0F0); + + /* Serdes Digital Misc1 */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6008); + + /* Serdes Digital4 Misc3 */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0x8088); + + /* Set Transmit PMD settings */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, + (WC_TX_FIR(0x12, 0x2d, 0x00) | + MDIO_WC_REG_TX_FIR_TAP_ENABLE)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + WC_TX_DRIVER(0x02, 0x02, 0x02, 0)); +} + +static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy, + struct link_params *params, + u8 fiber_mode, + u8 always_autoneg) +{ + struct bnx2x *bp = params->bp; + u16 val16, digctrl_kx1, digctrl_kx2; + + /* Clear XFI clock comp in non-10G single lane mode. */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, ~(3<<13)); + + bnx2x_warpcore_set_lpi_passthrough(phy, params); + + if (always_autoneg || phy->req_line_speed == SPEED_AUTO_NEG) { + /* SGMII Autoneg */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, + 0x1000); + DP(NETIF_MSG_LINK, "set SGMII AUTONEG\n"); + } else { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + val16 &= 0xcebf; + switch (phy->req_line_speed) { + case SPEED_10: + break; + case SPEED_100: + val16 |= 0x2000; + break; + case SPEED_1000: + val16 |= 0x0040; + break; + default: + DP(NETIF_MSG_LINK, + "Speed not supported: 0x%x\n", phy->req_line_speed); + return; + } + + if (phy->req_duplex == DUPLEX_FULL) + val16 |= 0x0100; + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16); + + DP(NETIF_MSG_LINK, "set SGMII force speed %d\n", + phy->req_line_speed); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + DP(NETIF_MSG_LINK, " (readback) %x\n", val16); + } + + /* SGMII Slave mode and disable signal detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &digctrl_kx1); + if (fiber_mode) + digctrl_kx1 = 1; + else + digctrl_kx1 &= 0xff4a; + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + digctrl_kx1); + + /* Turn off parallel detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &digctrl_kx2); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (digctrl_kx2 & ~(1<<2))); + + /* Re-enable parallel detect */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (digctrl_kx2 | (1<<2))); + + /* Enable autodet */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + (digctrl_kx1 | 0x10)); +} + +static void bnx2x_warpcore_reset_lane(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 reset) +{ + u16 val; + /* Take lane out of reset after configuration is finished */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, &val); + if (reset) + val |= 0xC000; + else + val &= 0x3FFF; + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, val); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, &val); +} +/* Clear SFI/XFI link settings registers */ +static void bnx2x_warpcore_clear_regs(struct bnx2x_phy *phy, + struct link_params *params, + u16 lane) +{ + struct bnx2x *bp = params->bp; + u16 i; + static struct bnx2x_reg_set wc_regs[] = { + {MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL1, 0x014a}, + {MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL3, 0x0800}, + {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL4_MISC3, 0x8008}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + 0x0195}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + 0x0007}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, + 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_TX_FIR_TAP, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040}, + {MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0x0140} + }; + /* Set XFI clock comp as default. */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, (3<<13)); + + for (i = 0; i < ARRAY_SIZE(wc_regs); i++) + bnx2x_cl45_write(bp, phy, wc_regs[i].devad, wc_regs[i].reg, + wc_regs[i].val); + + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, 0x0990); + +} + +static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp, + u32 chip_id, + u32 shmem_base, u8 port, + u8 *gpio_num, u8 *gpio_port) +{ + u32 cfg_pin; + *gpio_num = 0; + *gpio_port = 0; + if (CHIP_IS_E3(bp)) { + cfg_pin = (REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_MOD_ABS_MASK) >> + PORT_HW_CFG_E3_MOD_ABS_SHIFT; + + /* Should not happen. This function called upon interrupt + * triggered by GPIO ( since EPIO can only generate interrupts + * to MCP). + * So if this function was called and none of the GPIOs was set, + * it means the shit hit the fan. + */ + if ((cfg_pin < PIN_CFG_GPIO0_P0) || + (cfg_pin > PIN_CFG_GPIO3_P1)) { + DP(NETIF_MSG_LINK, + "No cfg pin %x for module detect indication\n", + cfg_pin); + return -EINVAL; + } + + *gpio_num = (cfg_pin - PIN_CFG_GPIO0_P0) & 0x3; + *gpio_port = (cfg_pin - PIN_CFG_GPIO0_P0) >> 2; + } else { + *gpio_num = MISC_REGISTERS_GPIO_3; + *gpio_port = port; + } + + return 0; +} + +static int bnx2x_is_sfp_module_plugged(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 gpio_num, gpio_port; + u32 gpio_val; + if (bnx2x_get_mod_abs_int_cfg(bp, params->chip_id, + params->shmem_base, params->port, + &gpio_num, &gpio_port) != 0) + return 0; + gpio_val = bnx2x_get_gpio(bp, gpio_num, gpio_port); + + /* Call the handling function in case module is detected */ + if (gpio_val == 0) + return 1; + else + return 0; +} +static int bnx2x_warpcore_get_sigdet(struct bnx2x_phy *phy, + struct link_params *params) +{ + u16 gp2_status_reg0, lane; + struct bnx2x *bp = params->bp; + + lane = bnx2x_get_warpcore_lane(phy, params); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_0, + &gp2_status_reg0); + + return (gp2_status_reg0 >> (8+lane)) & 0x1; +} + +static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 serdes_net_if; + u16 gp_status1 = 0, lnkup = 0, lnkup_kr = 0; + + vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1; + + if (!vars->turn_to_run_wc_rt) + return; + + if (vars->rx_tx_asic_rst) { + u16 lane = bnx2x_get_warpcore_lane(phy, params); + serdes_net_if = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_KR: + /* Do we get link yet? */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, 0x81d1, + &gp_status1); + lnkup = (gp_status1 >> (8+lane)) & 0x1;/* 1G */ + /*10G KR*/ + lnkup_kr = (gp_status1 >> (12+lane)) & 0x1; + + if (lnkup_kr || lnkup) { + vars->rx_tx_asic_rst = 0; + } else { + /* Reset the lane to see if link comes up.*/ + bnx2x_warpcore_reset_lane(bp, phy, 1); + bnx2x_warpcore_reset_lane(bp, phy, 0); + + /* Restart Autoneg */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200); + + vars->rx_tx_asic_rst--; + DP(NETIF_MSG_LINK, "0x%x retry left\n", + vars->rx_tx_asic_rst); + } + break; + + default: + break; + } + + } /*params->rx_tx_asic_rst*/ + +} +static void bnx2x_warpcore_config_sfi(struct bnx2x_phy *phy, + struct link_params *params) +{ + u16 lane = bnx2x_get_warpcore_lane(phy, params); + struct bnx2x *bp = params->bp; + bnx2x_warpcore_clear_regs(phy, params, lane); + if ((params->req_line_speed[LINK_CONFIG_IDX(INT_PHY)] == + SPEED_10000) && + (phy->media_type != ETH_PHY_SFP_1G_FIBER)) { + DP(NETIF_MSG_LINK, "Setting 10G SFI\n"); + bnx2x_warpcore_set_10G_XFI(phy, params, 0); + } else { + DP(NETIF_MSG_LINK, "Setting 1G Fiber\n"); + bnx2x_warpcore_set_sgmii_speed(phy, params, 1, 0); + } +} + +static void bnx2x_sfp_e3_set_transmitter(struct link_params *params, + struct bnx2x_phy *phy, + u8 tx_en) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin; + u8 port = params->port; + + cfg_pin = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_TX_LASER_MASK; + /* Set the !tx_en since this pin is DISABLE_TX_LASER */ + DP(NETIF_MSG_LINK, "Setting WC TX to %d\n", tx_en); + + /* For 20G, the expected pin to be used is 3 pins after the current */ + bnx2x_set_cfg_pin(bp, cfg_pin, tx_en ^ 1); + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G) + bnx2x_set_cfg_pin(bp, cfg_pin + 3, tx_en ^ 1); +} + +static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 serdes_net_if; + u8 fiber_mode; + u16 lane = bnx2x_get_warpcore_lane(phy, params); + serdes_net_if = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + DP(NETIF_MSG_LINK, "Begin Warpcore init, link_speed %d, " + "serdes_net_if = 0x%x\n", + vars->line_speed, serdes_net_if); + bnx2x_set_aer_mmd(params, phy); + bnx2x_warpcore_reset_lane(bp, phy, 1); + vars->phy_flags |= PHY_XGXS_FLAG; + if ((serdes_net_if == PORT_HW_CFG_NET_SERDES_IF_SGMII) || + (phy->req_line_speed && + ((phy->req_line_speed == SPEED_100) || + (phy->req_line_speed == SPEED_10)))) { + vars->phy_flags |= PHY_SGMII_FLAG; + DP(NETIF_MSG_LINK, "Setting SGMII mode\n"); + bnx2x_warpcore_clear_regs(phy, params, lane); + bnx2x_warpcore_set_sgmii_speed(phy, params, 0, 1); + } else { + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_KR: + /* Enable KR Auto Neg */ + if (params->loopback_mode != LOOPBACK_EXT) + bnx2x_warpcore_enable_AN_KR(phy, params, vars); + else { + DP(NETIF_MSG_LINK, "Setting KR 10G-Force\n"); + bnx2x_warpcore_set_10G_KR(phy, params, vars); + } + break; + + case PORT_HW_CFG_NET_SERDES_IF_XFI: + bnx2x_warpcore_clear_regs(phy, params, lane); + if (vars->line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, "Setting 10G XFI\n"); + bnx2x_warpcore_set_10G_XFI(phy, params, 1); + } else { + if (SINGLE_MEDIA_DIRECT(params)) { + DP(NETIF_MSG_LINK, "1G Fiber\n"); + fiber_mode = 1; + } else { + DP(NETIF_MSG_LINK, "10/100/1G SGMII\n"); + fiber_mode = 0; + } + bnx2x_warpcore_set_sgmii_speed(phy, + params, + fiber_mode, + 0); + } + + break; + + case PORT_HW_CFG_NET_SERDES_IF_SFI: + /* Issue Module detection if module is plugged, or + * enabled transmitter to avoid current leakage in case + * no module is connected + */ + if ((params->loopback_mode == LOOPBACK_NONE) || + (params->loopback_mode == LOOPBACK_EXT)) { + if (bnx2x_is_sfp_module_plugged(phy, params)) + bnx2x_sfp_module_detection(phy, params); + else + bnx2x_sfp_e3_set_transmitter(params, + phy, 1); + } + + bnx2x_warpcore_config_sfi(phy, params); + break; + + case PORT_HW_CFG_NET_SERDES_IF_DXGXS: + if (vars->line_speed != SPEED_20000) { + DP(NETIF_MSG_LINK, "Speed not supported yet\n"); + return; + } + DP(NETIF_MSG_LINK, "Setting 20G DXGXS\n"); + bnx2x_warpcore_set_20G_DXGXS(bp, phy, lane); + /* Issue Module detection */ + + bnx2x_sfp_module_detection(phy, params); + break; + case PORT_HW_CFG_NET_SERDES_IF_KR2: + if (!params->loopback_mode) { + bnx2x_warpcore_enable_AN_KR(phy, params, vars); + } else { + DP(NETIF_MSG_LINK, "Setting KR 20G-Force\n"); + bnx2x_warpcore_set_20G_force_KR2(phy, params); + } + break; + default: + DP(NETIF_MSG_LINK, + "Unsupported Serdes Net Interface 0x%x\n", + serdes_net_if); + return; + } + } + + /* Take lane out of reset after configuration is finished */ + bnx2x_warpcore_reset_lane(bp, phy, 0); + DP(NETIF_MSG_LINK, "Exit config init\n"); +} + +static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val16, lane; + bnx2x_sfp_e3_set_transmitter(params, phy, 0); + bnx2x_set_mdio_emac_per_phy(bp, params); + bnx2x_set_aer_mmd(params, phy); + /* Global register */ + bnx2x_warpcore_reset_lane(bp, phy, 1); + + /* Clear loopback settings (if any) */ + /* 10G & 20G */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0xBFFF); + + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0xfffe); + + /* Update those 1-copy registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Enable 1G MDIO (1-copy) */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + ~0x10); + + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, 0xff00); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 |= (0x11 << lane); + if (phy->flags & FLAGS_WC_DUAL_MODE) + val16 |= (0x22 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 &= ~(0x0303 << (lane << 1)); + val16 |= (0x0101 << (lane << 1)); + if (phy->flags & FLAGS_WC_DUAL_MODE) { + val16 &= ~(0x0c0c << (lane << 1)); + val16 |= (0x0404 << (lane << 1)); + } + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); + +} + +static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val16; + u32 lane; + DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n", + params->loopback_mode, phy->req_line_speed); + + if (phy->req_line_speed < SPEED_10000 || + phy->supported & SUPPORTED_20000baseKR2_Full) { + /* 10/100/1000/20G-KR2 */ + + /* Update those 1-copy registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Enable 1G MDIO (1-copy) */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + 0x10); + /* Set 1G loopback based on lane (1-copy) */ + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); + val16 |= (1<<lane); + if (phy->flags & FLAGS_WC_DUAL_MODE) + val16 |= (2<<lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, + val16); + + /* Switch back to 4-copy registers */ + bnx2x_set_aer_mmd(params, phy); + } else { + /* 10G / 20G-DXGXS */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, + 0x4000); + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1); + } +} + + + +static void bnx2x_sync_link(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 link_10g_plus; + if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) + vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; + vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); + if (vars->link_up) { + DP(NETIF_MSG_LINK, "phy link up\n"); + + vars->phy_link_up = 1; + vars->duplex = DUPLEX_FULL; + switch (vars->link_status & + LINK_STATUS_SPEED_AND_DUPLEX_MASK) { + case LINK_10THD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case LINK_10TFD: + vars->line_speed = SPEED_10; + break; + + case LINK_100TXHD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case LINK_100T4: + case LINK_100TXFD: + vars->line_speed = SPEED_100; + break; + + case LINK_1000THD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case LINK_1000TFD: + vars->line_speed = SPEED_1000; + break; + + case LINK_2500THD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case LINK_2500TFD: + vars->line_speed = SPEED_2500; + break; + + case LINK_10GTFD: + vars->line_speed = SPEED_10000; + break; + case LINK_20GTFD: + vars->line_speed = SPEED_20000; + break; + default: + break; + } + vars->flow_ctrl = 0; + if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) + vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; + + if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) + vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; + + if (!vars->flow_ctrl) + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + if (vars->line_speed && + ((vars->line_speed == SPEED_10) || + (vars->line_speed == SPEED_100))) { + vars->phy_flags |= PHY_SGMII_FLAG; + } else { + vars->phy_flags &= ~PHY_SGMII_FLAG; + } + if (vars->line_speed && + USES_WARPCORE(bp) && + (vars->line_speed == SPEED_1000)) + vars->phy_flags |= PHY_SGMII_FLAG; + /* Anything 10 and over uses the bmac */ + link_10g_plus = (vars->line_speed >= SPEED_10000); + + if (link_10g_plus) { + if (USES_WARPCORE(bp)) + vars->mac_type = MAC_TYPE_XMAC; + else + vars->mac_type = MAC_TYPE_BMAC; + } else { + if (USES_WARPCORE(bp)) + vars->mac_type = MAC_TYPE_UMAC; + else + vars->mac_type = MAC_TYPE_EMAC; + } + } else { /* Link down */ + DP(NETIF_MSG_LINK, "phy link down\n"); + + vars->phy_link_up = 0; + + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + /* Indicate no mac active */ + vars->mac_type = MAC_TYPE_NONE; + if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + if (vars->link_status & LINK_STATUS_SFP_TX_FAULT) + vars->phy_flags |= PHY_SFP_TX_FAULT_FLAG; + } +} + +void bnx2x_link_status_update(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 sync_offset, media_types; + /* Update PHY configuration */ + set_phy_vars(params, vars); + + vars->link_status = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + port_mb[port].link_status)); + + /* Force link UP in non LOOPBACK_EXT loopback mode(s) */ + if (params->loopback_mode != LOOPBACK_NONE && + params->loopback_mode != LOOPBACK_EXT) + vars->link_status |= LINK_STATUS_LINK_UP; + + if (bnx2x_eee_has_cap(params)) + vars->eee_status = REG_RD(bp, params->shmem2_base + + offsetof(struct shmem2_region, + eee_status[params->port])); + + vars->phy_flags = PHY_XGXS_FLAG; + bnx2x_sync_link(params, vars); + /* Sync media type */ + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].media_type); + media_types = REG_RD(bp, sync_offset); + + params->phy[INT_PHY].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT; + params->phy[EXT_PHY1].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT; + params->phy[EXT_PHY2].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT; + DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types); + + /* Sync AEU offset */ + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].aeu_int_mask); + + vars->aeu_int_mask = REG_RD(bp, sync_offset); + + /* Sync PFC status */ + if (vars->link_status & LINK_STATUS_PFC_ENABLED) + params->feature_config_flags |= + FEATURE_CONFIG_PFC_ENABLED; + else + params->feature_config_flags &= + ~FEATURE_CONFIG_PFC_ENABLED; + + if (SHMEM2_HAS(bp, link_attr_sync)) + params->link_attr_sync = SHMEM2_RD(bp, + link_attr_sync[params->port]); + + DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n", + vars->link_status, vars->phy_link_up, vars->aeu_int_mask); + DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", + vars->line_speed, vars->duplex, vars->flow_ctrl); +} + +static void bnx2x_set_master_ln(struct link_params *params, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + u16 new_master_ln, ser_lane; + ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + /* Set the master_ln for AN */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TEST_MODE_LANE, + &new_master_ln); + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2 , + MDIO_XGXS_BLOCK2_TEST_MODE_LANE, + (new_master_ln | ser_lane)); +} + +static int bnx2x_reset_unicore(struct link_params *params, + struct bnx2x_phy *phy, + u8 set_serdes) +{ + struct bnx2x *bp = params->bp; + u16 mii_control; + u16 i; + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); + + /* Reset the unicore */ + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + (mii_control | + MDIO_COMBO_IEEO_MII_CONTROL_RESET)); + if (set_serdes) + bnx2x_set_serdes_access(bp, params->port); + + /* Wait for the reset to self clear */ + for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) { + udelay(5); + + /* The reset erased the previous bank value */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + &mii_control); + + if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) { + udelay(5); + return 0; + } + } + + netdev_err(bp->dev, "Warning: PHY was not initialized," + " Port %d\n", + params->port); + DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n"); + return -EINVAL; + +} + +static void bnx2x_set_swap_lanes(struct link_params *params, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + /* Each two bits represents a lane number: + * No swap is 0123 => 0x1b no need to enable the swap + */ + u16 rx_lane_swap, tx_lane_swap; + + rx_lane_swap = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT); + tx_lane_swap = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT); + + if (rx_lane_swap != 0x1b) { + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_RX_LN_SWAP, + (rx_lane_swap | + MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE | + MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE)); + } else { + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0); + } + + if (tx_lane_swap != 0x1b) { + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TX_LN_SWAP, + (tx_lane_swap | + MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE)); + } else { + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0); + } +} + +static void bnx2x_set_parallel_detection(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 control2; + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, + &control2); + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; + else + control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; + DP(NETIF_MSG_LINK, "phy->speed_cap_mask = 0x%x, control2 = 0x%x\n", + phy->speed_cap_mask, control2); + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, + control2); + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { + DP(NETIF_MSG_LINK, "XGXS\n"); + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + &control2); + + + control2 |= + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + control2); + + /* Disable parallel detection of HiG */ + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); + } +} + +static void bnx2x_set_autoneg(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u8 enable_cl73) +{ + struct bnx2x *bp = params->bp; + u16 reg_val; + + /* CL37 Autoneg */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); + + /* CL37 Autoneg Enabled */ + if (vars->line_speed == SPEED_AUTO_NEG) + reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN; + else /* CL37 Autoneg Disabled */ + reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN); + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); + + /* Enable/Disable Autodetection */ + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val); + reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN | + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT); + reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE; + if (vars->line_speed == SPEED_AUTO_NEG) + reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; + else + reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val); + + /* Enable TetonII and BAM autoneg */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_BAM_NEXT_PAGE, + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, + ®_val); + if (vars->line_speed == SPEED_AUTO_NEG) { + /* Enable BAM aneg Mode and TetonII aneg Mode */ + reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); + } else { + /* TetonII and BAM Autoneg Disabled */ + reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); + } + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_BAM_NEXT_PAGE, + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, + reg_val); + + if (enable_cl73) { + /* Enable Cl73 FSM status bits */ + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_USERB0, + MDIO_CL73_USERB0_CL73_UCTRL, + 0xe); + + /* Enable BAM Station Manager*/ + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_USERB0, + MDIO_CL73_USERB0_CL73_BAM_CTRL1, + MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN | + MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN | + MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN); + + /* Advertise CL73 link speeds */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV2, + ®_val); + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4; + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV2, + reg_val); + + /* CL73 Autoneg Enabled */ + reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN; + + } else /* CL73 Autoneg Disabled */ + reg_val = 0; + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val); +} + +/* Program SerDes, forced speed */ +static void bnx2x_program_serdes(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 reg_val; + + /* Program duplex, disable autoneg and sgmii*/ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); + reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX | + MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK); + if (phy->req_duplex == DUPLEX_FULL) + reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); + + /* Program speed + * - needed only if the speed is greater than 1G (2.5G or 10G) + */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_MISC1, ®_val); + /* Clearing the speed value before setting the right speed */ + DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val); + + reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK | + MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); + + if (!((vars->line_speed == SPEED_1000) || + (vars->line_speed == SPEED_100) || + (vars->line_speed == SPEED_10))) { + + reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M | + MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); + if (vars->line_speed == SPEED_10000) + reg_val |= + MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4; + } + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_MISC1, reg_val); + +} + +static void bnx2x_set_brcm_cl37_advertisement(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val = 0; + + /* Set extended capabilities */ + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) + val |= MDIO_OVER_1G_UP1_2_5G; + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + val |= MDIO_OVER_1G_UP1_10G; + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_OVER_1G, + MDIO_OVER_1G_UP1, val); + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_OVER_1G, + MDIO_OVER_1G_UP3, 0x400); +} + +static void bnx2x_set_ieee_aneg_advertisement(struct bnx2x_phy *phy, + struct link_params *params, + u16 ieee_fc) +{ + struct bnx2x *bp = params->bp; + u16 val; + /* For AN, we are always publishing full duplex */ + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc); + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV1, &val); + val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH; + val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK); + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV1, val); +} + +static void bnx2x_restart_autoneg(struct bnx2x_phy *phy, + struct link_params *params, + u8 enable_cl73) +{ + struct bnx2x *bp = params->bp; + u16 mii_control; + + DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n"); + /* Enable and restart BAM/CL37 aneg */ + + if (enable_cl73) { + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + &mii_control); + + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + (mii_control | + MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN | + MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN)); + } else { + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + &mii_control); + DP(NETIF_MSG_LINK, + "bnx2x_restart_autoneg mii_control before = 0x%x\n", + mii_control); + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + (mii_control | + MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN)); + } +} + +static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 control1; + + /* In SGMII mode, the unicore is always slave */ + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, + &control1); + control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT; + /* Set sgmii mode (and not fiber) */ + control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE | + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET | + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE); + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, + control1); + + /* If forced speed */ + if (!(vars->line_speed == SPEED_AUTO_NEG)) { + /* Set speed, disable autoneg */ + u16 mii_control; + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + &mii_control); + mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK| + MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX); + + switch (vars->line_speed) { + case SPEED_100: + mii_control |= + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100; + break; + case SPEED_1000: + mii_control |= + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000; + break; + case SPEED_10: + /* There is nothing to set for 10M */ + break; + default: + /* Invalid speed for SGMII */ + DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", + vars->line_speed); + break; + } + + /* Setting the full duplex */ + if (phy->req_duplex == DUPLEX_FULL) + mii_control |= + MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + mii_control); + + } else { /* AN mode */ + /* Enable and restart AN */ + bnx2x_restart_autoneg(phy, params, 0); + } +} + +/* Link management + */ +static int bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 pd_10g, status2_1000x; + if (phy->req_line_speed != SPEED_AUTO_NEG) + return 0; + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_STATUS2, + &status2_1000x); + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_STATUS2, + &status2_1000x); + if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) { + DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n", + params->port); + return 1; + } + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, + &pd_10g); + + if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) { + DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n", + params->port); + return 1; + } + return 0; +} + +static void bnx2x_update_adv_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u32 gp_status) +{ + u16 ld_pause; /* local driver */ + u16 lp_pause; /* link partner */ + u16 pause_result; + struct bnx2x *bp = params->bp; + if ((gp_status & + (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | + MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) == + (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | + MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) { + + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV1, + &ld_pause); + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_LP_ADV1, + &lp_pause); + pause_result = (ld_pause & + MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n", pause_result); + } else { + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_AUTO_NEG_ADV, + &ld_pause); + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1, + &lp_pause); + pause_result = (ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5; + pause_result |= (lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; + DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n", pause_result); + } + bnx2x_pause_resolve(phy, params, vars, pause_result); + +} + +static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u32 gp_status) +{ + struct bnx2x *bp = params->bp; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + /* Resolve from gp_status in case of AN complete and not sgmii */ + if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) { + /* Update the advertised flow-controled of LD/LP in AN */ + if (phy->req_line_speed == SPEED_AUTO_NEG) + bnx2x_update_adv_fc(phy, params, vars, gp_status); + /* But set the flow-control result as the requested one */ + vars->flow_ctrl = phy->req_flow_ctrl; + } else if (phy->req_line_speed != SPEED_AUTO_NEG) + vars->flow_ctrl = params->req_fc_auto_adv; + else if ((gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && + (!(vars->phy_flags & PHY_SGMII_FLAG))) { + if (bnx2x_direct_parallel_detect_used(phy, params)) { + vars->flow_ctrl = params->req_fc_auto_adv; + return; + } + bnx2x_update_adv_fc(phy, params, vars, gp_status); + } + DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl); +} + +static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 rx_status, ustat_val, cl37_fsm_received; + DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n"); + /* Step 1: Make sure signal is detected */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_RX0, + MDIO_RX0_RX_STATUS, + &rx_status); + if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) != + (MDIO_RX0_RX_STATUS_SIGDET)) { + DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73." + "rx_status(0x80b0) = 0x%x\n", rx_status); + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN); + return; + } + /* Step 2: Check CL73 state machine */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_USERB0, + MDIO_CL73_USERB0_CL73_USTAT1, + &ustat_val); + if ((ustat_val & + (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | + MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) != + (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | + MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) { + DP(NETIF_MSG_LINK, "CL73 state-machine is not stable. " + "ustat_val(0x8371) = 0x%x\n", ustat_val); + return; + } + /* Step 3: Check CL37 Message Pages received to indicate LP + * supports only CL37 + */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_REMOTE_PHY, + MDIO_REMOTE_PHY_MISC_RX_STATUS, + &cl37_fsm_received); + if ((cl37_fsm_received & + (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | + MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) != + (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | + MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) { + DP(NETIF_MSG_LINK, "No CL37 FSM were received. " + "misc_rx_status(0x8330) = 0x%x\n", + cl37_fsm_received); + return; + } + /* The combined cl37/cl73 fsm state information indicating that + * we are connected to a device which does not support cl73, but + * does support cl37 BAM. In this case we disable cl73 and + * restart cl37 auto-neg + */ + + /* Disable CL73 */ + CL22_WR_OVER_CL45(bp, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + 0); + /* Restart CL37 autoneg */ + bnx2x_restart_autoneg(phy, params, 0); + DP(NETIF_MSG_LINK, "Disabling CL73, and restarting CL37 autoneg\n"); +} + +static void bnx2x_xgxs_an_resolve(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u32 gp_status) +{ + if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + + if (bnx2x_direct_parallel_detect_used(phy, params)) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; +} +static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u16 is_link_up, + u16 speed_mask, + u16 is_duplex) +{ + struct bnx2x *bp = params->bp; + if (phy->req_line_speed == SPEED_AUTO_NEG) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; + if (is_link_up) { + DP(NETIF_MSG_LINK, "phy link up\n"); + + vars->phy_link_up = 1; + vars->link_status |= LINK_STATUS_LINK_UP; + + switch (speed_mask) { + case GP_STATUS_10M: + vars->line_speed = SPEED_10; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= LINK_10TFD; + else + vars->link_status |= LINK_10THD; + break; + + case GP_STATUS_100M: + vars->line_speed = SPEED_100; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= LINK_100TXFD; + else + vars->link_status |= LINK_100TXHD; + break; + + case GP_STATUS_1G: + case GP_STATUS_1G_KX: + vars->line_speed = SPEED_1000; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= LINK_1000TFD; + else + vars->link_status |= LINK_1000THD; + break; + + case GP_STATUS_2_5G: + vars->line_speed = SPEED_2500; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= LINK_2500TFD; + else + vars->link_status |= LINK_2500THD; + break; + + case GP_STATUS_5G: + case GP_STATUS_6G: + DP(NETIF_MSG_LINK, + "link speed unsupported gp_status 0x%x\n", + speed_mask); + return -EINVAL; + + case GP_STATUS_10G_KX4: + case GP_STATUS_10G_HIG: + case GP_STATUS_10G_CX4: + case GP_STATUS_10G_KR: + case GP_STATUS_10G_SFI: + case GP_STATUS_10G_XFI: + vars->line_speed = SPEED_10000; + vars->link_status |= LINK_10GTFD; + break; + case GP_STATUS_20G_DXGXS: + case GP_STATUS_20G_KR2: + vars->line_speed = SPEED_20000; + vars->link_status |= LINK_20GTFD; + break; + default: + DP(NETIF_MSG_LINK, + "link speed unsupported gp_status 0x%x\n", + speed_mask); + return -EINVAL; + } + } else { /* link_down */ + DP(NETIF_MSG_LINK, "phy link down\n"); + + vars->phy_link_up = 0; + + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_NONE; + } + DP(NETIF_MSG_LINK, " phy_link_up %x line_speed %d\n", + vars->phy_link_up, vars->line_speed); + return 0; +} + +static int bnx2x_link_settings_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + + u16 gp_status, duplex = DUPLEX_HALF, link_up = 0, speed_mask; + int rc = 0; + + /* Read gp_status */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_GP_STATUS, + MDIO_GP_STATUS_TOP_AN_STATUS1, + &gp_status); + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) + duplex = DUPLEX_FULL; + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) + link_up = 1; + speed_mask = gp_status & GP_STATUS_SPEED_MASK; + DP(NETIF_MSG_LINK, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x\n", + gp_status, link_up, speed_mask); + rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, speed_mask, + duplex); + if (rc == -EINVAL) + return rc; + + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { + if (SINGLE_MEDIA_DIRECT(params)) { + vars->duplex = duplex; + bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status); + if (phy->req_line_speed == SPEED_AUTO_NEG) + bnx2x_xgxs_an_resolve(phy, params, vars, + gp_status); + } + } else { /* Link_down */ + if ((phy->req_line_speed == SPEED_AUTO_NEG) && + SINGLE_MEDIA_DIRECT(params)) { + /* Check signal is detected */ + bnx2x_check_fallback_to_cl37(phy, params); + } + } + + /* Read LP advertised speeds*/ + if (SINGLE_MEDIA_DIRECT(params) && + (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)) { + u16 val; + + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_LP_ADV2, &val); + + if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 | + MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_OVER_1G, + MDIO_OVER_1G_LP_UP1, &val); + + if (val & MDIO_OVER_1G_UP1_2_5G) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE; + if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + } + + DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", + vars->duplex, vars->flow_ctrl, vars->link_status); + return rc; +} + +static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 lane; + u16 gp_status1, gp_speed, link_up, duplex = DUPLEX_FULL; + int rc = 0; + lane = bnx2x_get_warpcore_lane(phy, params); + /* Read gp_status */ + if ((params->loopback_mode) && + (phy->flags & FLAGS_WC_DUAL_MODE)) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up); + link_up &= 0x1; + } else if ((phy->req_line_speed > SPEED_10000) && + (phy->supported & SUPPORTED_20000baseMLD2_Full)) { + u16 temp_link_up; + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + 1, &temp_link_up); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + 1, &link_up); + DP(NETIF_MSG_LINK, "PCS RX link status = 0x%x-->0x%x\n", + temp_link_up, link_up); + link_up &= (1<<2); + if (link_up) + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } else { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, + &gp_status1); + DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1); + /* Check for either KR, 1G, or AN up. */ + link_up = ((gp_status1 >> 8) | + (gp_status1 >> 12) | + (gp_status1)) & + (1 << lane); + if (phy->supported & SUPPORTED_20000baseKR2_Full) { + u16 an_link; + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &an_link); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &an_link); + link_up |= (an_link & (1<<2)); + } + if (link_up && SINGLE_MEDIA_DIRECT(params)) { + u16 pd, gp_status4; + if (phy->req_line_speed == SPEED_AUTO_NEG) { + /* Check Autoneg complete */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status4); + if (gp_status4 & ((1<<12)<<lane)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + + /* Check parallel detect used */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_PAR_DET_10G_STATUS, + &pd); + if (pd & (1<<15)) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + } + bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = duplex; + } + } + + if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) && + SINGLE_MEDIA_DIRECT(params)) { + u16 val; + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &val); + + if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 | + MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL3_LP_UP1, &val); + + if (val & MDIO_OVER_1G_UP1_2_5G) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE; + if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + } + + + if (lane < 2) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_2, &gp_speed); + } else { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed); + } + DP(NETIF_MSG_LINK, "lane %d gp_speed 0x%x\n", lane, gp_speed); + + if ((lane & 1) == 0) + gp_speed <<= 8; + gp_speed &= 0x3f00; + link_up = !!link_up; + + rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, + duplex); + + /* In case of KR link down, start up the recovering procedure */ + if ((!link_up) && (phy->media_type == ETH_PHY_KR) && + (!(phy->flags & FLAGS_WC_DUAL_MODE))) + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + + DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", + vars->duplex, vars->flow_ctrl, vars->link_status); + return rc; +} +static void bnx2x_set_gmii_tx_driver(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; + u16 lp_up2; + u16 tx_driver; + u16 bank; + + /* Read precomp */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_OVER_1G, + MDIO_OVER_1G_LP_UP2, &lp_up2); + + /* Bits [10:7] at lp_up2, positioned at [15:12] */ + lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >> + MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) << + MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT); + + if (lp_up2 == 0) + return; + + for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3; + bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) { + CL22_RD_OVER_CL45(bp, phy, + bank, + MDIO_TX0_TX_DRIVER, &tx_driver); + + /* Replace tx_driver bits [15:12] */ + if (lp_up2 != + (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) { + tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK; + tx_driver |= lp_up2; + CL22_WR_OVER_CL45(bp, phy, + bank, + MDIO_TX0_TX_DRIVER, tx_driver); + } + } +} + +static int bnx2x_emac_program(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u16 mode = 0; + + DP(NETIF_MSG_LINK, "setting link speed & duplex\n"); + bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 + + EMAC_REG_EMAC_MODE, + (EMAC_MODE_25G_MODE | + EMAC_MODE_PORT_MII_10M | + EMAC_MODE_HALF_DUPLEX)); + switch (vars->line_speed) { + case SPEED_10: + mode |= EMAC_MODE_PORT_MII_10M; + break; + + case SPEED_100: + mode |= EMAC_MODE_PORT_MII; + break; + + case SPEED_1000: + mode |= EMAC_MODE_PORT_GMII; + break; + + case SPEED_2500: + mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII); + break; + + default: + /* 10G not valid for EMAC */ + DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", + vars->line_speed); + return -EINVAL; + } + + if (vars->duplex == DUPLEX_HALF) + mode |= EMAC_MODE_HALF_DUPLEX; + bnx2x_bits_en(bp, + GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE, + mode); + + bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed); + return 0; +} + +static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, + struct link_params *params) +{ + + u16 bank, i = 0; + struct bnx2x *bp = params->bp; + + for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; + bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) { + CL22_WR_OVER_CL45(bp, phy, + bank, + MDIO_RX0_RX_EQ_BOOST, + phy->rx_preemphasis[i]); + } + + for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; + bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { + CL22_WR_OVER_CL45(bp, phy, + bank, + MDIO_TX0_TX_DRIVER, + phy->tx_preemphasis[i]); + } +} + +static void bnx2x_xgxs_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 enable_cl73 = (SINGLE_MEDIA_DIRECT(params) || + (params->loopback_mode == LOOPBACK_XGXS)); + if (!(vars->phy_flags & PHY_SGMII_FLAG)) { + if (SINGLE_MEDIA_DIRECT(params) && + (params->feature_config_flags & + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) + bnx2x_set_preemphasis(phy, params); + + /* Forced speed requested? */ + if (vars->line_speed != SPEED_AUTO_NEG || + (SINGLE_MEDIA_DIRECT(params) && + params->loopback_mode == LOOPBACK_EXT)) { + DP(NETIF_MSG_LINK, "not SGMII, no AN\n"); + + /* Disable autoneg */ + bnx2x_set_autoneg(phy, params, vars, 0); + + /* Program speed and duplex */ + bnx2x_program_serdes(phy, params, vars); + + } else { /* AN_mode */ + DP(NETIF_MSG_LINK, "not SGMII, AN\n"); + + /* AN enabled */ + bnx2x_set_brcm_cl37_advertisement(phy, params); + + /* Program duplex & pause advertisement (for aneg) */ + bnx2x_set_ieee_aneg_advertisement(phy, params, + vars->ieee_fc); + + /* Enable autoneg */ + bnx2x_set_autoneg(phy, params, vars, enable_cl73); + + /* Enable and restart AN */ + bnx2x_restart_autoneg(phy, params, enable_cl73); + } + + } else { /* SGMII mode */ + DP(NETIF_MSG_LINK, "SGMII\n"); + + bnx2x_initialize_sgmii_process(phy, params, vars); + } +} + +static int bnx2x_prepare_xgxs(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + int rc; + vars->phy_flags |= PHY_XGXS_FLAG; + if ((phy->req_line_speed && + ((phy->req_line_speed == SPEED_100) || + (phy->req_line_speed == SPEED_10))) || + (!phy->req_line_speed && + (phy->speed_cap_mask >= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->speed_cap_mask < + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->type == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT_SD)) + vars->phy_flags |= PHY_SGMII_FLAG; + else + vars->phy_flags &= ~PHY_SGMII_FLAG; + + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + bnx2x_set_aer_mmd(params, phy); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + bnx2x_set_master_ln(params, phy); + + rc = bnx2x_reset_unicore(params, phy, 0); + /* Reset the SerDes and wait for reset bit return low */ + if (rc) + return rc; + + bnx2x_set_aer_mmd(params, phy); + /* Setting the masterLn_def again after the reset */ + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) { + bnx2x_set_master_ln(params, phy); + bnx2x_set_swap_lanes(params, phy); + } + + return rc; +} + +static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, + struct bnx2x_phy *phy, + struct link_params *params) +{ + u16 cnt, ctrl; + /* Wait for soft reset to get cleared up to 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + bnx2x_cl22_read(bp, phy, + MDIO_PMA_REG_CTRL, &ctrl); + else + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, &ctrl); + if (!(ctrl & (1<<15))) + break; + usleep_range(1000, 2000); + } + + if (cnt == 1000) + netdev_err(bp->dev, "Warning: PHY was not initialized," + " Port %d\n", + params->port); + DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", ctrl, cnt); + return cnt; +} + +static void bnx2x_link_int_enable(struct link_params *params) +{ + u8 port = params->port; + u32 mask; + struct bnx2x *bp = params->bp; + + /* Setting the status to report on link up for either XGXS or SerDes */ + if (CHIP_IS_E3(bp)) { + mask = NIG_MASK_XGXS0_LINK_STATUS; + if (!(SINGLE_MEDIA_DIRECT(params))) + mask |= NIG_MASK_MI_INT; + } else if (params->switch_cfg == SWITCH_CFG_10G) { + mask = (NIG_MASK_XGXS0_LINK10G | + NIG_MASK_XGXS0_LINK_STATUS); + DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); + if (!(SINGLE_MEDIA_DIRECT(params)) && + params->phy[INT_PHY].type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } + + } else { /* SerDes */ + mask = NIG_MASK_SERDES0_LINK_STATUS; + DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); + if (!(SINGLE_MEDIA_DIRECT(params)) && + params->phy[INT_PHY].type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } + } + bnx2x_bits_en(bp, + NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + mask); + + DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, + (params->switch_cfg == SWITCH_CFG_10G), + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); + DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), + REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c)); + DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); +} + +static void bnx2x_rearm_latch_signal(struct bnx2x *bp, u8 port, + u8 exp_mi_int) +{ + u32 latch_status = 0; + + /* Disable the MI INT ( external phy int ) by writing 1 to the + * status register. Link down indication is high-active-signal, + * so in this case we need to write the status to clear the XOR + */ + /* Read Latched signals */ + latch_status = REG_RD(bp, + NIG_REG_LATCH_STATUS_0 + port*8); + DP(NETIF_MSG_LINK, "latch_status = 0x%x\n", latch_status); + /* Handle only those with latched-signal=up.*/ + if (exp_mi_int) + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port*4, + NIG_STATUS_EMAC0_MI_INT); + else + bnx2x_bits_dis(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port*4, + NIG_STATUS_EMAC0_MI_INT); + + if (latch_status & 1) { + + /* For all latched-signal=up : Re-Arm Latch signals */ + REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8, + (latch_status & 0xfffe) | (latch_status & 1)); + } + /* For all latched-signal=up,Write original_signal to status */ +} + +static void bnx2x_link_int_ack(struct link_params *params, + struct link_vars *vars, u8 is_10g_plus) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u32 mask; + /* First reset all status we assume only one line will be + * change at a time + */ + bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); + if (vars->phy_link_up) { + if (USES_WARPCORE(bp)) + mask = NIG_STATUS_XGXS0_LINK_STATUS; + else { + if (is_10g_plus) + mask = NIG_STATUS_XGXS0_LINK10G; + else if (params->switch_cfg == SWITCH_CFG_10G) { + /* Disable the link interrupt by writing 1 to + * the relevant lane in the status register + */ + u32 ser_lane = + ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + mask = ((1 << ser_lane) << + NIG_STATUS_XGXS0_LINK_STATUS_SIZE); + } else + mask = NIG_STATUS_SERDES0_LINK_STATUS; + } + DP(NETIF_MSG_LINK, "Ack link up interrupt with mask 0x%x\n", + mask); + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + mask); + } +} + +static int bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len) +{ + str[0] = '\0'; + (*len)--; + return 0; +} + +static int bnx2x_format_ver(u32 num, u8 *str, u16 *len) +{ + u16 ret; + + if (*len < 10) { + /* Need more than 10chars for this format */ + bnx2x_null_format_ver(num, str, len); + return -EINVAL; + } + + ret = scnprintf(str, *len, "%hx.%hx", num >> 16, num); + *len -= ret; + return 0; +} + +static int bnx2x_3_seq_format_ver(u32 num, u8 *str, u16 *len) +{ + u16 ret; + + if (*len < 10) { + /* Need more than 10chars for this format */ + bnx2x_null_format_ver(num, str, len); + return -EINVAL; + } + + ret = scnprintf(str, *len, "%hhx.%hhx.%hhx", num >> 16, num >> 8, num); + *len -= ret; + return 0; +} + +int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 *version, + u16 len) +{ + struct bnx2x *bp; + u32 spirom_ver = 0; + int status = 0; + u8 *ver_p = version; + u16 remain_len = len; + if (version == NULL || params == NULL) + return -EINVAL; + bp = params->bp; + + /* Extract first external phy*/ + version[0] = '\0'; + spirom_ver = REG_RD(bp, params->phy[EXT_PHY1].ver_addr); + + if (params->phy[EXT_PHY1].format_fw_ver) { + status |= params->phy[EXT_PHY1].format_fw_ver(spirom_ver, + ver_p, + &remain_len); + ver_p += (len - remain_len); + } + if ((params->num_phys == MAX_PHYS) && + (params->phy[EXT_PHY2].ver_addr != 0)) { + spirom_ver = REG_RD(bp, params->phy[EXT_PHY2].ver_addr); + if (params->phy[EXT_PHY2].format_fw_ver) { + *ver_p = '/'; + ver_p++; + remain_len--; + status |= params->phy[EXT_PHY2].format_fw_ver( + spirom_ver, + ver_p, + &remain_len); + ver_p = version + (len - remain_len); + } + } + *ver_p = '\0'; + return status; +} + +static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + u8 port = params->port; + struct bnx2x *bp = params->bp; + + if (phy->req_line_speed != SPEED_1000) { + u32 md_devad = 0; + + DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); + + if (!CHIP_IS_E3(bp)) { + /* Change the uni_phy_addr in the nig */ + md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + + port*0x18)); + + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, + 0x5); + } + + bnx2x_cl45_write(bp, phy, + 5, + (MDIO_REG_BANK_AER_BLOCK + + (MDIO_AER_BLOCK_AER_REG & 0xf)), + 0x2800); + + bnx2x_cl45_write(bp, phy, + 5, + (MDIO_REG_BANK_CL73_IEEEB0 + + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), + 0x6041); + msleep(200); + /* Set aer mmd back */ + bnx2x_set_aer_mmd(params, phy); + + if (!CHIP_IS_E3(bp)) { + /* And md_devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, + md_devad); + } + } else { + u16 mii_ctrl; + DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); + bnx2x_cl45_read(bp, phy, 5, + (MDIO_REG_BANK_COMBO_IEEE0 + + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), + &mii_ctrl); + bnx2x_cl45_write(bp, phy, 5, + (MDIO_REG_BANK_COMBO_IEEE0 + + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), + mii_ctrl | + MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK); + } +} + +int bnx2x_set_led(struct link_params *params, + struct link_vars *vars, u8 mode, u32 speed) +{ + u8 port = params->port; + u16 hw_led_mode = params->hw_led_mode; + int rc = 0; + u8 phy_idx; + u32 tmp; + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); + DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", + speed, hw_led_mode); + /* In case */ + for (phy_idx = EXT_PHY1; phy_idx < MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].set_link_led) { + params->phy[phy_idx].set_link_led( + ¶ms->phy[phy_idx], params, mode); + } + } + + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0); + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + SHARED_HW_CFG_LED_MAC1); + + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + if (params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + tmp &= ~(EMAC_LED_1000MB_OVERRIDE | + EMAC_LED_100MB_OVERRIDE | + EMAC_LED_10MB_OVERRIDE); + else + tmp |= EMAC_LED_OVERRIDE; + + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp); + break; + + case LED_MODE_OPER: + /* For all other phys, OPER mode is same as ON, so in case + * link is down, do nothing + */ + if (!vars->link_up) + break; + /* else: fall through */ + case LED_MODE_ON: + if (((params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) || + (params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722)) && + CHIP_IS_E2(bp) && params->num_phys == 2) { + /* This is a work-around for E2+8727 Configurations */ + if (mode == LED_MODE_ON || + speed == SPEED_10000){ + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp | EMAC_LED_OVERRIDE)); + /* Return here without enabling traffic + * LED blink and setting rate in ON mode. + * In oper mode, enabling LED blink + * and setting rate is needed. + */ + if (mode == LED_MODE_ON) + return rc; + } + } else if (SINGLE_MEDIA_DIRECT(params)) { + /* This is a work-around for HW issue found when link + * is up in CL73 + */ + if ((!CHIP_IS_E3(bp)) || + (CHIP_IS_E3(bp) && + mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + + if (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp) || + (mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + else + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + hw_led_mode); + } else if ((params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && + (mode == LED_MODE_ON)) { + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | + EMAC_LED_OVERRIDE | EMAC_LED_1000MB_OVERRIDE); + /* Break here; otherwise, it'll disable the + * intended override. + */ + break; + } else { + u32 nig_led_mode = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? + (SHARED_HW_CFG_LED_PHY1 >> + SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode; + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + nig_led_mode); + } + + REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); + /* Set blinking rate to ~15.9Hz */ + if (CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, + LED_BLINK_RATE_VAL_E3); + else + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, + LED_BLINK_RATE_VAL_E1X_E2); + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + + port*4, 1); + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp & (~EMAC_LED_OVERRIDE))); + + if (CHIP_IS_E1(bp) && + ((speed == SPEED_2500) || + (speed == SPEED_1000) || + (speed == SPEED_100) || + (speed == SPEED_10))) { + /* For speeds less than 10G LED scheme is different */ + REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + + port*4, 1); + REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + + port*4, 0); + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + + port*4, 1); + } + break; + + default: + rc = -EINVAL; + DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n", + mode); + break; + } + return rc; + +} + +/* This function comes to reflect the actual link state read DIRECTLY from the + * HW + */ +int bnx2x_test_link(struct link_params *params, struct link_vars *vars, + u8 is_serdes) +{ + struct bnx2x *bp = params->bp; + u16 gp_status = 0, phy_index = 0; + u8 ext_phy_link_up = 0, serdes_phy_type; + struct link_vars temp_vars; + struct bnx2x_phy *int_phy = ¶ms->phy[INT_PHY]; + + if (CHIP_IS_E3(bp)) { + u16 link_up; + if (params->req_line_speed[LINK_CONFIG_IDX(INT_PHY)] + > SPEED_10000) { + /* Check 20G link */ + bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, + 1, &link_up); + bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, + 1, &link_up); + link_up &= (1<<2); + } else { + /* Check 10G link and below*/ + u8 lane = bnx2x_get_warpcore_lane(int_phy, params); + bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, + &gp_status); + gp_status = ((gp_status >> 8) & 0xf) | + ((gp_status >> 12) & 0xf); + link_up = gp_status & (1 << lane); + } + if (!link_up) + return -ESRCH; + } else { + CL22_RD_OVER_CL45(bp, int_phy, + MDIO_REG_BANK_GP_STATUS, + MDIO_GP_STATUS_TOP_AN_STATUS1, + &gp_status); + /* Link is up only if both local phy and external phy are up */ + if (!(gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS)) + return -ESRCH; + } + /* In XGXS loopback mode, do not check external PHY */ + if (params->loopback_mode == LOOPBACK_XGXS) + return 0; + + switch (params->num_phys) { + case 1: + /* No external PHY */ + return 0; + case 2: + ext_phy_link_up = params->phy[EXT_PHY1].read_status( + ¶ms->phy[EXT_PHY1], + params, &temp_vars); + break; + case 3: /* Dual Media */ + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + serdes_phy_type = ((params->phy[phy_index].media_type == + ETH_PHY_SFPP_10G_FIBER) || + (params->phy[phy_index].media_type == + ETH_PHY_SFP_1G_FIBER) || + (params->phy[phy_index].media_type == + ETH_PHY_XFP_FIBER) || + (params->phy[phy_index].media_type == + ETH_PHY_DA_TWINAX)); + + if (is_serdes != serdes_phy_type) + continue; + if (params->phy[phy_index].read_status) { + ext_phy_link_up |= + params->phy[phy_index].read_status( + ¶ms->phy[phy_index], + params, &temp_vars); + } + } + break; + } + if (ext_phy_link_up) + return 0; + return -ESRCH; +} + +static int bnx2x_link_initialize(struct link_params *params, + struct link_vars *vars) +{ + u8 phy_index, non_ext_phy; + struct bnx2x *bp = params->bp; + /* In case of external phy existence, the line speed would be the + * line speed linked up by the external phy. In case it is direct + * only, then the line_speed during initialization will be + * equal to the req_line_speed + */ + vars->line_speed = params->phy[INT_PHY].req_line_speed; + + /* Initialize the internal phy in case this is a direct board + * (no external phys), or this board has external phy which requires + * to first. + */ + if (!USES_WARPCORE(bp)) + bnx2x_prepare_xgxs(¶ms->phy[INT_PHY], params, vars); + /* init ext phy and enable link state int */ + non_ext_phy = (SINGLE_MEDIA_DIRECT(params) || + (params->loopback_mode == LOOPBACK_XGXS)); + + if (non_ext_phy || + (params->phy[EXT_PHY1].flags & FLAGS_INIT_XGXS_FIRST) || + (params->loopback_mode == LOOPBACK_EXT_PHY)) { + struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; + if (vars->line_speed == SPEED_AUTO_NEG && + (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp))) + bnx2x_set_parallel_detection(phy, params); + if (params->phy[INT_PHY].config_init) + params->phy[INT_PHY].config_init(phy, params, vars); + } + + /* Re-read this value in case it was changed inside config_init due to + * limitations of optic module + */ + vars->line_speed = params->phy[INT_PHY].req_line_speed; + + /* Init external phy*/ + if (non_ext_phy) { + if (params->phy[INT_PHY].supported & + SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + } else { + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + /* No need to initialize second phy in case of first + * phy only selection. In case of second phy, we do + * need to initialize the first phy, since they are + * connected. + */ + if (params->phy[phy_index].supported & + SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + + if (phy_index == EXT_PHY2 && + (bnx2x_phy_selection(params) == + PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) { + DP(NETIF_MSG_LINK, + "Not initializing second phy\n"); + continue; + } + params->phy[phy_index].config_init( + ¶ms->phy[phy_index], + params, vars); + } + } + /* Reset the interrupt indication after phy was initialized */ + bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + + params->port*4, + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + return 0; +} + +static void bnx2x_int_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + /* Reset the SerDes/XGXS */ + REG_WR(params->bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, + (0x1ff << (params->port*16))); +} + +static void bnx2x_common_ext_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 gpio_port; + /* HW reset */ + if (CHIP_IS_E2(bp)) + gpio_port = BP_PATH(bp); + else + gpio_port = params->port; + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + gpio_port); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + gpio_port); + DP(NETIF_MSG_LINK, "reset external PHY\n"); +} + +static int bnx2x_update_link_down(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + + DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); + bnx2x_set_led(params, vars, LED_MODE_OFF, 0); + vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG; + /* Indicate no mac active */ + vars->mac_type = MAC_TYPE_NONE; + + /* Update shared memory */ + vars->link_status &= ~LINK_UPDATE_MASK; + vars->line_speed = 0; + bnx2x_update_mng(params, vars->link_status); + + /* Activate nig drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* Disable emac */ + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + usleep_range(10000, 20000); + /* Reset BigMac/Xmac */ + if (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp)) + bnx2x_set_bmac_rx(bp, params->chip_id, params->port, 0); + + if (CHIP_IS_E3(bp)) { + /* Prevent LPI Generation by chip */ + REG_WR(bp, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2), + 0); + REG_WR(bp, MISC_REG_CPMU_LP_MASK_ENT_P0 + (params->port << 2), + 0); + vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK | + SHMEM_EEE_ACTIVE_BIT); + + bnx2x_update_mng_eee(params, vars->eee_status); + bnx2x_set_xmac_rxtx(params, 0); + bnx2x_set_umac_rxtx(params, 0); + } + + return 0; +} + +static int bnx2x_update_link_up(struct link_params *params, + struct link_vars *vars, + u8 link_10g) +{ + struct bnx2x *bp = params->bp; + u8 phy_idx, port = params->port; + int rc = 0; + + vars->link_status |= (LINK_STATUS_LINK_UP | + LINK_STATUS_PHYSICAL_LINK_FLAG); + vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; + + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) + vars->link_status |= + LINK_STATUS_TX_FLOW_CONTROL_ENABLED; + + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) + vars->link_status |= + LINK_STATUS_RX_FLOW_CONTROL_ENABLED; + if (USES_WARPCORE(bp)) { + if (link_10g) { + if (bnx2x_xmac_enable(params, vars, 0) == + -ESRCH) { + DP(NETIF_MSG_LINK, "Found errors on XMAC\n"); + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_STATUS_LINK_UP; + } + } else + bnx2x_umac_enable(params, vars, 0); + bnx2x_set_led(params, vars, + LED_MODE_OPER, vars->line_speed); + + if ((vars->eee_status & SHMEM_EEE_ACTIVE_BIT) && + (vars->eee_status & SHMEM_EEE_LPI_REQUESTED_BIT)) { + DP(NETIF_MSG_LINK, "Enabling LPI assertion\n"); + REG_WR(bp, MISC_REG_CPMU_LP_FW_ENABLE_P0 + + (params->port << 2), 1); + REG_WR(bp, MISC_REG_CPMU_LP_DR_ENABLE, 1); + REG_WR(bp, MISC_REG_CPMU_LP_MASK_ENT_P0 + + (params->port << 2), 0xfc20); + } + } + if ((CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp))) { + if (link_10g) { + if (bnx2x_bmac_enable(params, vars, 0, 1) == + -ESRCH) { + DP(NETIF_MSG_LINK, "Found errors on BMAC\n"); + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_STATUS_LINK_UP; + } + + bnx2x_set_led(params, vars, + LED_MODE_OPER, SPEED_10000); + } else { + rc = bnx2x_emac_program(params, vars); + bnx2x_emac_enable(params, vars, 0); + + /* AN complete? */ + if ((vars->link_status & + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) + && (!(vars->phy_flags & PHY_SGMII_FLAG)) && + SINGLE_MEDIA_DIRECT(params)) + bnx2x_set_gmii_tx_driver(params); + } + } + + /* PBF - link up */ + if (CHIP_IS_E1x(bp)) + rc |= bnx2x_pbf_update(params, vars->flow_ctrl, + vars->line_speed); + + /* Disable drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0); + + /* Update shared memory */ + bnx2x_update_mng(params, vars->link_status); + bnx2x_update_mng_eee(params, vars->eee_status); + /* Check remote fault */ + for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) { + bnx2x_check_half_open_conn(params, vars, 0); + break; + } + } + msleep(20); + return rc; +} + +static void bnx2x_chng_link_count(struct link_params *params, bool clear) +{ + struct bnx2x *bp = params->bp; + u32 addr, val; + + /* Verify the link_change_count is supported by the MFW */ + if (!(SHMEM2_HAS(bp, link_change_count))) + return; + + addr = params->shmem2_base + + offsetof(struct shmem2_region, link_change_count[params->port]); + if (clear) + val = 0; + else + val = REG_RD(bp, addr) + 1; + REG_WR(bp, addr, val); +} + +/* The bnx2x_link_update function should be called upon link + * interrupt. + * Link is considered up as follows: + * - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs + * to be up + * - SINGLE_MEDIA - The link between the 577xx and the external + * phy (XGXS) need to up as well as the external link of the + * phy (PHY_EXT1) + * - DUAL_MEDIA - The link between the 577xx and the first + * external phy needs to be up, and at least one of the 2 + * external phy link must be up. + */ +int bnx2x_link_update(struct link_params *params, struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + struct link_vars phy_vars[MAX_PHYS]; + u8 port = params->port; + u8 link_10g_plus, phy_index; + u32 prev_link_status = vars->link_status; + u8 ext_phy_link_up = 0, cur_link_up; + int rc = 0; + u8 is_mi_int = 0; + u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; + u8 active_external_phy = INT_PHY; + vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_UPDATE_MASK; + for (phy_index = INT_PHY; phy_index < params->num_phys; + phy_index++) { + phy_vars[phy_index].flow_ctrl = 0; + phy_vars[phy_index].link_status = 0; + phy_vars[phy_index].line_speed = 0; + phy_vars[phy_index].duplex = DUPLEX_FULL; + phy_vars[phy_index].phy_link_up = 0; + phy_vars[phy_index].link_up = 0; + phy_vars[phy_index].fault_detected = 0; + /* different consideration, since vars holds inner state */ + phy_vars[phy_index].eee_status = vars->eee_status; + } + + if (USES_WARPCORE(bp)) + bnx2x_set_aer_mmd(params, ¶ms->phy[INT_PHY]); + + DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", + port, (vars->phy_flags & PHY_XGXS_FLAG), + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); + + is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + + port*0x18) > 0); + DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n", + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + is_mi_int, + REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); + + DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); + + /* Disable emac */ + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + /* Step 1: + * Check external link change only for external phys, and apply + * priority selection between them in case the link on both phys + * is up. Note that instead of the common vars, a temporary + * vars argument is used since each phy may have different link/ + * speed/duplex result + */ + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + struct bnx2x_phy *phy = ¶ms->phy[phy_index]; + if (!phy->read_status) + continue; + /* Read link status and params of this ext phy */ + cur_link_up = phy->read_status(phy, params, + &phy_vars[phy_index]); + if (cur_link_up) { + DP(NETIF_MSG_LINK, "phy in index %d link is up\n", + phy_index); + } else { + DP(NETIF_MSG_LINK, "phy in index %d link is down\n", + phy_index); + continue; + } + + if (!ext_phy_link_up) { + ext_phy_link_up = 1; + active_external_phy = phy_index; + } else { + switch (bnx2x_phy_selection(params)) { + case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + /* In this option, the first PHY makes sure to pass the + * traffic through itself only. + * Its not clear how to reset the link on the second phy + */ + active_external_phy = EXT_PHY1; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + /* In this option, the first PHY makes sure to pass the + * traffic through the second PHY. + */ + active_external_phy = EXT_PHY2; + break; + default: + /* Link indication on both PHYs with the following cases + * is invalid: + * - FIRST_PHY means that second phy wasn't initialized, + * hence its link is expected to be down + * - SECOND_PHY means that first phy should not be able + * to link up by itself (using configuration) + * - DEFAULT should be overridden during initialization + */ + DP(NETIF_MSG_LINK, "Invalid link indication" + "mpc=0x%x. DISABLING LINK !!!\n", + params->multi_phy_config); + ext_phy_link_up = 0; + break; + } + } + } + prev_line_speed = vars->line_speed; + /* Step 2: + * Read the status of the internal phy. In case of + * DIRECT_SINGLE_MEDIA board, this link is the external link, + * otherwise this is the link between the 577xx and the first + * external phy + */ + if (params->phy[INT_PHY].read_status) + params->phy[INT_PHY].read_status( + ¶ms->phy[INT_PHY], + params, vars); + /* The INT_PHY flow control reside in the vars. This include the + * case where the speed or flow control are not set to AUTO. + * Otherwise, the active external phy flow control result is set + * to the vars. The ext_phy_line_speed is needed to check if the + * speed is different between the internal phy and external phy. + * This case may be result of intermediate link speed change. + */ + if (active_external_phy > INT_PHY) { + vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl; + /* Link speed is taken from the XGXS. AN and FC result from + * the external phy. + */ + vars->link_status |= phy_vars[active_external_phy].link_status; + + /* if active_external_phy is first PHY and link is up - disable + * disable TX on second external PHY + */ + if (active_external_phy == EXT_PHY1) { + if (params->phy[EXT_PHY2].phy_specific_func) { + DP(NETIF_MSG_LINK, + "Disabling TX on EXT_PHY2\n"); + params->phy[EXT_PHY2].phy_specific_func( + ¶ms->phy[EXT_PHY2], + params, DISABLE_TX); + } + } + + ext_phy_line_speed = phy_vars[active_external_phy].line_speed; + vars->duplex = phy_vars[active_external_phy].duplex; + if (params->phy[active_external_phy].supported & + SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + else + vars->link_status &= ~LINK_STATUS_SERDES_LINK; + + vars->eee_status = phy_vars[active_external_phy].eee_status; + + DP(NETIF_MSG_LINK, "Active external phy selected: %x\n", + active_external_phy); + } + + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + if (params->phy[phy_index].flags & + FLAGS_REARM_LATCH_SIGNAL) { + bnx2x_rearm_latch_signal(bp, port, + phy_index == + active_external_phy); + break; + } + } + DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," + " ext_phy_line_speed = %d\n", vars->flow_ctrl, + vars->link_status, ext_phy_line_speed); + /* Upon link speed change set the NIG into drain mode. Comes to + * deals with possible FIFO glitch due to clk change when speed + * is decreased without link down indicator + */ + + if (vars->phy_link_up) { + if (!(SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up && + (ext_phy_line_speed != vars->line_speed)) { + DP(NETIF_MSG_LINK, "Internal link speed %d is" + " different than the external" + " link speed %d\n", vars->line_speed, + ext_phy_line_speed); + vars->phy_link_up = 0; + } else if (prev_line_speed != vars->line_speed) { + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, + 0); + usleep_range(1000, 2000); + } + } + + /* Anything 10 and over uses the bmac */ + link_10g_plus = (vars->line_speed >= SPEED_10000); + + bnx2x_link_int_ack(params, vars, link_10g_plus); + + /* In case external phy link is up, and internal link is down + * (not initialized yet probably after link initialization, it + * needs to be initialized. + * Note that after link down-up as result of cable plug, the xgxs + * link would probably become up again without the need + * initialize it + */ + if (!(SINGLE_MEDIA_DIRECT(params))) { + DP(NETIF_MSG_LINK, "ext_phy_link_up = %d, int_link_up = %d," + " init_preceding = %d\n", ext_phy_link_up, + vars->phy_link_up, + params->phy[EXT_PHY1].flags & + FLAGS_INIT_XGXS_FIRST); + if (!(params->phy[EXT_PHY1].flags & + FLAGS_INIT_XGXS_FIRST) + && ext_phy_link_up && !vars->phy_link_up) { + vars->line_speed = ext_phy_line_speed; + if (vars->line_speed < SPEED_1000) + vars->phy_flags |= PHY_SGMII_FLAG; + else + vars->phy_flags &= ~PHY_SGMII_FLAG; + + if (params->phy[INT_PHY].config_init) + params->phy[INT_PHY].config_init( + ¶ms->phy[INT_PHY], params, + vars); + } + } + /* Link is up only if both local phy and external phy (in case of + * non-direct board) are up and no fault detected on active PHY. + */ + vars->link_up = (vars->phy_link_up && + (ext_phy_link_up || + SINGLE_MEDIA_DIRECT(params)) && + (phy_vars[active_external_phy].fault_detected == 0)); + + /* Update the PFC configuration in case it was changed */ + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + + if (vars->link_up) + rc = bnx2x_update_link_up(params, vars, link_10g_plus); + else + rc = bnx2x_update_link_down(params, vars); + + if ((prev_link_status ^ vars->link_status) & LINK_STATUS_LINK_UP) + bnx2x_chng_link_count(params, false); + + /* Update MCP link status was changed */ + if (params->feature_config_flags & FEATURE_CONFIG_BC_SUPPORTS_AFEX) + bnx2x_fw_command(bp, DRV_MSG_CODE_LINK_STATUS_CHANGED, 0); + + return rc; +} + +/*****************************************************************************/ +/* External Phy section */ +/*****************************************************************************/ +void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port) +{ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + usleep_range(1000, 2000); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); +} + +static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port, + u32 spirom_ver, u32 ver_addr) +{ + DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n", + (u16)(spirom_ver>>16), (u16)spirom_ver, port); + + if (ver_addr) + REG_WR(bp, ver_addr, spirom_ver); +} + +static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 port) +{ + u16 fw_ver1, fw_ver2; + + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER1, &fw_ver1); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, &fw_ver2); + bnx2x_save_spirom_version(bp, port, (u32)(fw_ver1<<16 | fw_ver2), + phy->ver_addr); +} + +static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp, + struct bnx2x_phy *phy, + struct link_vars *vars) +{ + u16 val; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &val); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &val); + if (val & (1<<5)) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + if ((val & (1<<0)) == 0) + vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; +} + +/******************************************************************/ +/* common BCM8073/BCM8727 PHY SECTION */ +/******************************************************************/ +static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + if (phy->req_line_speed == SPEED_10 || + phy->req_line_speed == SPEED_100) { + vars->flow_ctrl = phy->req_flow_ctrl; + return; + } + + if (bnx2x_ext_phy_resolve_fc(phy, params, vars) && + (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE)) { + u16 pause_result; + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); + + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + pause_result = (ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5; + pause_result |= (lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; + + bnx2x_pause_resolve(phy, params, vars, pause_result); + DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n", + pause_result); + } +} +static int bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 port) +{ + u32 count = 0; + u16 fw_ver1, fw_msgout; + int rc = 0; + + /* Boot port from external ROM */ + /* EDC grst */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + 0x0001); + + /* Ucode reboot and rst */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + 0x008c); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0001); + + /* Reset internal microprocessor */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + + /* Release srst bit */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + + /* Delay 100ms per the PHY specifications */ + msleep(100); + + /* 8073 sometimes taking longer to download */ + do { + count++; + if (count > 300) { + DP(NETIF_MSG_LINK, + "bnx2x_8073_8727_external_rom_boot port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); + rc = -EINVAL; + break; + } + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER1, &fw_ver1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_M8051_MSGOUT_REG, &fw_msgout); + + usleep_range(1000, 2000); + } while (fw_ver1 == 0 || fw_ver1 == 0x4321 || + ((fw_msgout & 0xff) != 0x03 && (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))); + + /* Clear ser_boot_ctl bit */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0000); + bnx2x_save_bcm_spirom_ver(bp, phy, port); + + DP(NETIF_MSG_LINK, + "bnx2x_8073_8727_external_rom_boot port %x:" + "Download complete. fw version = 0x%x\n", + port, fw_ver1); + + return rc; +} + +/******************************************************************/ +/* BCM8073 PHY SECTION */ +/******************************************************************/ +static int bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) +{ + /* This is only required for 8073A1, version 102 only */ + u16 val; + + /* Read 8073 HW revision*/ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_CHIP_REV, &val); + + if (val != 1) { + /* No need to workaround in 8073 A1 */ + return 0; + } + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, &val); + + /* SNR should be applied only for version 0x102 */ + if (val != 0x102) + return 0; + + return 1; +} + +static int bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy) +{ + u16 val, cnt, cnt1 ; + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_CHIP_REV, &val); + + if (val > 0) { + /* No need to workaround in 8073 A1 */ + return 0; + } + /* XAUI workaround in 8073 A0: */ + + /* After loading the boot ROM and restarting Autoneg, poll + * Dev1, Reg $C820: + */ + + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_SPEED_LINK_STATUS, + &val); + /* If bit [14] = 0 or bit [13] = 0, continue on with + * system initialization (XAUI work-around not required, as + * these bits indicate 2.5G or 1G link up). + */ + if (!(val & (1<<14)) || !(val & (1<<13))) { + DP(NETIF_MSG_LINK, "XAUI work-around not required\n"); + return 0; + } else if (!(val & (1<<15))) { + DP(NETIF_MSG_LINK, "bit 15 went off\n"); + /* If bit 15 is 0, then poll Dev1, Reg $C841 until it's + * MSB (bit15) goes to 1 (indicating that the XAUI + * workaround has completed), then continue on with + * system initialization. + */ + for (cnt1 = 0; cnt1 < 1000; cnt1++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_XAUI_WA, &val); + if (val & (1<<15)) { + DP(NETIF_MSG_LINK, + "XAUI workaround has completed\n"); + return 0; + } + usleep_range(3000, 6000); + } + break; + } + usleep_range(3000, 6000); + } + DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n"); + return -EINVAL; +} + +static void bnx2x_807x_force_10G(struct bnx2x *bp, struct bnx2x_phy *phy) +{ + /* Force KR or KX */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0000); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); +} + +static void bnx2x_8073_set_pause_cl37(struct link_params *params, + struct bnx2x_phy *phy, + struct link_vars *vars) +{ + u16 cl37_val; + struct bnx2x *bp = params->bp; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &cl37_val); + + cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + } + DP(NETIF_MSG_LINK, + "Ext phy AN advertize cl37 0x%x\n", cl37_val); + + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val); + msleep(500); +} + +static void bnx2x_8073_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + switch (action) { + case PHY_INIT: + /* Enable LASI */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, (1<<2)); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004); + break; + } +} + +static int bnx2x_8073_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val = 0, tmp1; + u8 gpio_port; + DP(NETIF_MSG_LINK, "Init 8073\n"); + + if (CHIP_IS_E2(bp)) + gpio_port = BP_PATH(bp); + else + gpio_port = params->port; + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); + + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); + + bnx2x_8073_specific_func(phy, params, PHY_INIT); + bnx2x_8073_set_pause_cl37(params, phy, vars); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); + + DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); + + /* Swap polarity if required - Must be done only in non-1G mode */ + if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { + /* Configure the 8073 to swap _P and _N of the KR lines */ + DP(NETIF_MSG_LINK, "Swapping polarity for the 8073\n"); + /* 10G Rx/Tx and 1G Tx signal polarity swap */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, + (val | (3<<9))); + } + + + /* Enable CL37 BAM */ + if (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { + + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8073_BAM, &val); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8073_BAM, val | 1); + DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n"); + } + if (params->loopback_mode == LOOPBACK_EXT) { + bnx2x_807x_force_10G(bp, phy); + DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n"); + return 0; + } else { + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0002); + } + if (phy->req_line_speed != SPEED_AUTO_NEG) { + if (phy->req_line_speed == SPEED_10000) { + val = (1<<7); + } else if (phy->req_line_speed == SPEED_2500) { + val = (1<<5); + /* Note that 2.5G works only when used with 1G + * advertisement + */ + } else + val = (1<<5); + } else { + val = 0; + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + val |= (1<<7); + + /* Note that 2.5G works only when used with 1G advertisement */ + if (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + val |= (1<<5); + DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val); + } + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, &tmp1); + + if (((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) && + (phy->req_line_speed == SPEED_AUTO_NEG)) || + (phy->req_line_speed == SPEED_2500)) { + u16 phy_ver; + /* Allow 2.5G for A1 and above */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, + &phy_ver); + DP(NETIF_MSG_LINK, "Add 2.5G\n"); + if (phy_ver > 0) + tmp1 |= 1; + else + tmp1 &= 0xfffe; + } else { + DP(NETIF_MSG_LINK, "Disable 2.5G\n"); + tmp1 &= 0xfffe; + } + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, tmp1); + /* Add support for CL37 (passive mode) II */ + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &tmp1); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, + (tmp1 | ((phy->req_duplex == DUPLEX_FULL) ? + 0x20 : 0x40))); + + /* Add support for CL37 (passive mode) III */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + + /* The SNR will improve about 2db by changing BW and FEE main + * tap. Rest commands are executed after link is up + * Change FFE main cursor to 5 in EDC register + */ + if (bnx2x_8073_is_snr_needed(bp, phy)) + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_EDC_FFE_MAIN, + 0xFB0C); + + /* Enable FEC (Forware Error Correction) Request in the AN */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, &tmp1); + tmp1 |= (1<<15); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, tmp1); + + bnx2x_ext_phy_set_pause(params, phy, vars); + + /* Restart autoneg */ + msleep(500); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + DP(NETIF_MSG_LINK, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x\n", + ((val & (1<<5)) > 0), ((val & (1<<7)) > 0)); + return 0; +} + +static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 link_up = 0; + u16 val1, val2; + u16 link_status = 0; + u16 an1000_status = 0; + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + + DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1); + + /* Clear the interrupt LASI status register */ + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1); + DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n", val2, val1); + /* Clear MSG-OUT */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); + + /* Check the LASI */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); + + DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2); + + /* Check the link status */ + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); + DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + link_up = ((val1 & 4) == 4); + DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1); + + if (link_up && + ((phy->req_line_speed != SPEED_10000))) { + if (bnx2x_8073_xaui_wa(bp, phy) != 0) + return 0; + } + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + + /* Check the link status on 1.1.2 */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x," + "an_link_status=0x%x\n", val2, val1, an1000_status); + + link_up = (((val1 & 4) == 4) || (an1000_status & (1<<1))); + if (link_up && bnx2x_8073_is_snr_needed(bp, phy)) { + /* The SNR will improve about 2dbby changing the BW and FEE main + * tap. The 1st write to change FFE main tap is set before + * restart AN. Change PLL Bandwidth in EDC register + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PLL_BANDWIDTH, + 0x26BC); + + /* Change CDR Bandwidth in EDC register */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, + 0x0333); + } + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_SPEED_LINK_STATUS, + &link_status); + + /* Bits 0..2 --> speed detected, bits 13..15--> link is down */ + if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) { + link_up = 1; + vars->line_speed = SPEED_10000; + DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n", + params->port); + } else if ((link_status & (1<<1)) && (!(link_status & (1<<14)))) { + link_up = 1; + vars->line_speed = SPEED_2500; + DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n", + params->port); + } else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) { + link_up = 1; + vars->line_speed = SPEED_1000; + DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n", + params->port); + } else { + link_up = 0; + DP(NETIF_MSG_LINK, "port %x: External link is down\n", + params->port); + } + + if (link_up) { + /* Swap polarity if required */ + if (params->lane_config & + PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { + /* Configure the 8073 to swap P and N of the KR lines */ + bnx2x_cl45_read(bp, phy, + MDIO_XS_DEVAD, + MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1); + /* Set bit 3 to invert Rx in 1G mode and clear this bit + * when it`s in 10G mode. + */ + if (vars->line_speed == SPEED_1000) { + DP(NETIF_MSG_LINK, "Swapping 1G polarity for" + "the 8073\n"); + val1 |= (1<<3); + } else + val1 &= ~(1<<3); + + bnx2x_cl45_write(bp, phy, + MDIO_XS_DEVAD, + MDIO_XS_REG_8073_RX_CTRL_PCIE, + val1); + } + bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); + bnx2x_8073_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + } + + if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &val1); + + if (val1 & (1<<5)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + if (val1 & (1<<7)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + } + + return link_up; +} + +static void bnx2x_8073_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 gpio_port; + if (CHIP_IS_E2(bp)) + gpio_port = BP_PATH(bp); + else + gpio_port = params->port; + DP(NETIF_MSG_LINK, "Setting 8073 port %d into low power mode\n", + gpio_port); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + gpio_port); +} + +/******************************************************************/ +/* BCM8705 PHY SECTION */ +/******************************************************************/ +static int bnx2x_8705_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "init 8705\n"); + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); + bnx2x_wait_reset_complete(bp, phy, params); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100); + bnx2x_cl45_write(bp, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1); + /* BCM8705 doesn't have microcode, hence the 0 */ + bnx2x_save_spirom_version(bp, params->port, params->shmem_base, 0); + return 0; +} + +static u8 bnx2x_8705_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u8 link_up = 0; + u16 val1, rx_sd; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "read status 8705\n"); + bnx2x_cl45_read(bp, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_cl45_read(bp, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, 0xc809, &val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, 0xc809, &val1); + + DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1); + link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) && ((val1 & (1<<8)) == 0)); + if (link_up) { + vars->line_speed = SPEED_10000; + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } + return link_up; +} + +/******************************************************************/ +/* SFP+ module Section */ +/******************************************************************/ +static void bnx2x_set_disable_pmd_transmit(struct link_params *params, + struct bnx2x_phy *phy, + u8 pmd_dis) +{ + struct bnx2x *bp = params->bp; + /* Disable transmitter only for bootcodes which can enable it afterwards + * (for D3 link) + */ + if (pmd_dis) { + if (params->feature_config_flags & + FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) + DP(NETIF_MSG_LINK, "Disabling PMD transmitter\n"); + else { + DP(NETIF_MSG_LINK, "NOT disabling PMD transmitter\n"); + return; + } + } else + DP(NETIF_MSG_LINK, "Enabling PMD transmitter\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_DISABLE, pmd_dis); +} + +static u8 bnx2x_get_gpio_port(struct link_params *params) +{ + u8 gpio_port; + u32 swap_val, swap_override; + struct bnx2x *bp = params->bp; + if (CHIP_IS_E2(bp)) + gpio_port = BP_PATH(bp); + else + gpio_port = params->port; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + return gpio_port ^ (swap_val && swap_override); +} + +static void bnx2x_sfp_e1e2_set_transmitter(struct link_params *params, + struct bnx2x_phy *phy, + u8 tx_en) +{ + u16 val; + u8 port = params->port; + struct bnx2x *bp = params->bp; + u32 tx_en_mode; + + /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ + tx_en_mode = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].sfp_ctrl)) & + PORT_HW_CFG_TX_LASER_MASK; + DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x " + "mode = %x\n", tx_en, port, tx_en_mode); + switch (tx_en_mode) { + case PORT_HW_CFG_TX_LASER_MDIO: + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + &val); + + if (tx_en) + val &= ~(1<<15); + else + val |= (1<<15); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + val); + break; + case PORT_HW_CFG_TX_LASER_GPIO0: + case PORT_HW_CFG_TX_LASER_GPIO1: + case PORT_HW_CFG_TX_LASER_GPIO2: + case PORT_HW_CFG_TX_LASER_GPIO3: + { + u16 gpio_pin; + u8 gpio_port, gpio_mode; + if (tx_en) + gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH; + else + gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW; + + gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0; + gpio_port = bnx2x_get_gpio_port(params); + bnx2x_set_gpio(bp, gpio_pin, gpio_mode, gpio_port); + break; + } + default: + DP(NETIF_MSG_LINK, "Invalid TX_LASER_MDIO 0x%x\n", tx_en_mode); + break; + } +} + +static void bnx2x_sfp_set_transmitter(struct link_params *params, + struct bnx2x_phy *phy, + u8 tx_en) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting SFP+ transmitter to %d\n", tx_en); + if (CHIP_IS_E3(bp)) + bnx2x_sfp_e3_set_transmitter(params, phy, tx_en); + else + bnx2x_sfp_e1e2_set_transmitter(params, phy, tx_en); +} + +static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) +{ + struct bnx2x *bp = params->bp; + u16 val = 0; + u16 i; + if (byte_cnt > SFP_EEPROM_PAGE_SIZE) { + DP(NETIF_MSG_LINK, + "Reading from eeprom is limited to 0xf\n"); + return -EINVAL; + } + /* Set the read command byte count */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, + (byte_cnt | (dev_addr << 8))); + + /* Set the read command address */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, + addr); + + /* Activate read command */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, + 0x2c0f); + + /* Wait up to 500us for command complete status */ + for (i = 0; i < 100; i++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) + break; + udelay(5); + } + + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { + DP(NETIF_MSG_LINK, + "Got bad status 0x%x when reading from SFP+ EEPROM\n", + (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); + return -EINVAL; + } + + /* Read the buffer */ + for (i = 0; i < byte_cnt; i++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val); + o_buf[i] = (u8)(val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK); + } + + for (i = 0; i < 100; i++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) + return 0; + usleep_range(1000, 2000); + } + return -EINVAL; +} + +static void bnx2x_warpcore_power_module(struct link_params *params, + u8 power) +{ + u32 pin_cfg; + struct bnx2x *bp = params->bp; + + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_PWR_DIS_MASK) >> + PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", + power, pin_cfg); + /* Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); +} +static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, + u8 dev_addr, + u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) +{ + int rc = 0; + u8 i, j = 0, cnt = 0; + u32 data_array[4]; + u16 addr32; + struct bnx2x *bp = params->bp; + + if (byte_cnt > SFP_EEPROM_PAGE_SIZE) { + DP(NETIF_MSG_LINK, + "Reading from eeprom is limited to 16 bytes\n"); + return -EINVAL; + } + + /* 4 byte aligned address */ + addr32 = addr & (~0x3); + do { + if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) { + bnx2x_warpcore_power_module(params, 0); + /* Note that 100us are not enough here */ + usleep_range(1000, 2000); + bnx2x_warpcore_power_module(params, 1); + } + rc = bnx2x_bsc_read(params, bp, dev_addr, addr32, 0, byte_cnt, + data_array); + } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); + + if (rc == 0) { + for (i = (addr - addr32); i < byte_cnt + (addr - addr32); i++) { + o_buf[j] = *((u8 *)data_array + i); + j++; + } + } + + return rc; +} + +static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) +{ + struct bnx2x *bp = params->bp; + u16 val, i; + + if (byte_cnt > SFP_EEPROM_PAGE_SIZE) { + DP(NETIF_MSG_LINK, + "Reading from eeprom is limited to 0xf\n"); + return -EINVAL; + } + + /* Set 2-wire transfer rate of SFP+ module EEPROM + * to 100Khz since some DACs(direct attached cables) do + * not work at 400Khz. + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, + ((dev_addr << 8) | 1)); + + /* Need to read from 1.8000 to clear it */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, + &val); + + /* Set the read command byte count */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, + ((byte_cnt < 2) ? 2 : byte_cnt)); + + /* Set the read command address */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, + addr); + /* Set the destination address */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + 0x8004, + MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF); + + /* Activate read command */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, + 0x8002); + /* Wait appropriate time for two-wire command to finish before + * polling the status register + */ + usleep_range(1000, 2000); + + /* Wait up to 500us for command complete status */ + for (i = 0; i < 100; i++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) + break; + udelay(5); + } + + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { + DP(NETIF_MSG_LINK, + "Got bad status 0x%x when reading from SFP+ EEPROM\n", + (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); + return -EFAULT; + } + + /* Read the buffer */ + for (i = 0; i < byte_cnt; i++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val); + o_buf[i] = (u8)(val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK); + } + + for (i = 0; i < 100; i++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) + return 0; + usleep_range(1000, 2000); + } + + return -EINVAL; +} +int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u8 dev_addr, + u16 addr, u16 byte_cnt, u8 *o_buf) +{ + int rc = 0; + struct bnx2x *bp = params->bp; + u8 xfer_size; + u8 *user_data = o_buf; + read_sfp_module_eeprom_func_p read_func; + + if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) { + DP(NETIF_MSG_LINK, "invalid dev_addr 0x%x\n", dev_addr); + return -EINVAL; + } + + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + read_func = bnx2x_8726_read_sfp_module_eeprom; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + read_func = bnx2x_8727_read_sfp_module_eeprom; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + read_func = bnx2x_warpcore_read_sfp_module_eeprom; + break; + default: + return -EOPNOTSUPP; + } + + while (!rc && (byte_cnt > 0)) { + xfer_size = (byte_cnt > SFP_EEPROM_PAGE_SIZE) ? + SFP_EEPROM_PAGE_SIZE : byte_cnt; + rc = read_func(phy, params, dev_addr, addr, xfer_size, + user_data, 0); + byte_cnt -= xfer_size; + user_data += xfer_size; + addr += xfer_size; + } + return rc; +} + +static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, + struct link_params *params, + u16 *edc_mode) +{ + struct bnx2x *bp = params->bp; + u32 sync_offset = 0, phy_idx, media_types; + u8 val[SFP_EEPROM_FC_TX_TECH_ADDR + 1], check_limiting_mode = 0; + *edc_mode = EDC_MODE_LIMITING; + phy->media_type = ETH_PHY_UNSPECIFIED; + /* First check for copper cable */ + if (bnx2x_read_sfp_module_eeprom(phy, + params, + I2C_DEV_ADDR_A0, + 0, + SFP_EEPROM_FC_TX_TECH_ADDR + 1, + (u8 *)val) != 0) { + DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n"); + return -EINVAL; + } + params->link_attr_sync &= ~LINK_SFP_EEPROM_COMP_CODE_MASK; + params->link_attr_sync |= val[SFP_EEPROM_10G_COMP_CODE_ADDR] << + LINK_SFP_EEPROM_COMP_CODE_SHIFT; + bnx2x_update_link_attr(params, params->link_attr_sync); + switch (val[SFP_EEPROM_CON_TYPE_ADDR]) { + case SFP_EEPROM_CON_TYPE_VAL_COPPER: + { + u8 copper_module_type; + phy->media_type = ETH_PHY_DA_TWINAX; + /* Check if its active cable (includes SFP+ module) + * of passive cable + */ + copper_module_type = val[SFP_EEPROM_FC_TX_TECH_ADDR]; + + if (copper_module_type & + SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { + DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + *edc_mode = EDC_MODE_ACTIVE_DAC; + else + check_limiting_mode = 1; + } else { + *edc_mode = EDC_MODE_PASSIVE_DAC; + /* Even in case PASSIVE_DAC indication is not set, + * treat it as a passive DAC cable, since some cables + * don't have this indication. + */ + if (copper_module_type & + SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { + DP(NETIF_MSG_LINK, + "Passive Copper cable detected\n"); + } else { + DP(NETIF_MSG_LINK, + "Unknown copper-cable-type\n"); + } + } + break; + } + case SFP_EEPROM_CON_TYPE_VAL_UNKNOWN: + case SFP_EEPROM_CON_TYPE_VAL_LC: + case SFP_EEPROM_CON_TYPE_VAL_RJ45: + check_limiting_mode = 1; + if (((val[SFP_EEPROM_10G_COMP_CODE_ADDR] & + (SFP_EEPROM_10G_COMP_CODE_SR_MASK | + SFP_EEPROM_10G_COMP_CODE_LR_MASK | + SFP_EEPROM_10G_COMP_CODE_LRM_MASK)) == 0) && + (val[SFP_EEPROM_1G_COMP_CODE_ADDR] != 0)) { + DP(NETIF_MSG_LINK, "1G SFP module detected\n"); + phy->media_type = ETH_PHY_SFP_1G_FIBER; + if (phy->req_line_speed != SPEED_1000) { + u8 gport = params->port; + phy->req_line_speed = SPEED_1000; + if (!CHIP_IS_E1x(bp)) { + gport = BP_PATH(bp) + + (params->port << 1); + } + netdev_err(bp->dev, + "Warning: Link speed was forced to 1000Mbps. Current SFP module in port %d is not compliant with 10G Ethernet\n", + gport); + } + if (val[SFP_EEPROM_1G_COMP_CODE_ADDR] & + SFP_EEPROM_1G_COMP_CODE_BASE_T) { + bnx2x_sfp_set_transmitter(params, phy, 0); + msleep(40); + bnx2x_sfp_set_transmitter(params, phy, 1); + } + } else { + int idx, cfg_idx = 0; + DP(NETIF_MSG_LINK, "10G Optic module detected\n"); + for (idx = INT_PHY; idx < MAX_PHYS; idx++) { + if (params->phy[idx].type == phy->type) { + cfg_idx = LINK_CONFIG_IDX(idx); + break; + } + } + phy->media_type = ETH_PHY_SFPP_10G_FIBER; + phy->req_line_speed = params->req_line_speed[cfg_idx]; + } + break; + default: + DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n", + val[SFP_EEPROM_CON_TYPE_ADDR]); + return -EINVAL; + } + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].media_type); + media_types = REG_RD(bp, sync_offset); + /* Update media type for non-PMF sync */ + for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { + if (&(params->phy[phy_idx]) == phy) { + media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); + media_types |= ((phy->media_type & + PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); + break; + } + } + REG_WR(bp, sync_offset, media_types); + if (check_limiting_mode) { + u8 options[SFP_EEPROM_OPTIONS_SIZE]; + if (bnx2x_read_sfp_module_eeprom(phy, + params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_OPTIONS_ADDR, + SFP_EEPROM_OPTIONS_SIZE, + options) != 0) { + DP(NETIF_MSG_LINK, + "Failed to read Option field from module EEPROM\n"); + return -EINVAL; + } + if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK)) + *edc_mode = EDC_MODE_LINEAR; + else + *edc_mode = EDC_MODE_LIMITING; + } + DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode); + return 0; +} +/* This function read the relevant field from the module (SFP+), and verify it + * is compliant with this board + */ +static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u32 val, cmd; + u32 fw_resp, fw_cmd_param; + char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1]; + char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1]; + phy->flags &= ~FLAGS_SFP_NOT_APPROVED; + val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port].config)); + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) { + DP(NETIF_MSG_LINK, "NOT enforcing module verification\n"); + return 0; + } + + if (params->feature_config_flags & + FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY) { + /* Use specific phy request */ + cmd = DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL; + } else if (params->feature_config_flags & + FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) { + /* Use first phy request only in case of non-dual media*/ + if (DUAL_MEDIA(params)) { + DP(NETIF_MSG_LINK, + "FW does not support OPT MDL verification\n"); + return -EINVAL; + } + cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL; + } else { + /* No support in OPT MDL detection */ + DP(NETIF_MSG_LINK, + "FW does not support OPT MDL verification\n"); + return -EINVAL; + } + + fw_cmd_param = FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl); + fw_resp = bnx2x_fw_command(bp, cmd, fw_cmd_param); + if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) { + DP(NETIF_MSG_LINK, "Approved module\n"); + return 0; + } + + /* Format the warning message */ + if (bnx2x_read_sfp_module_eeprom(phy, + params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_VENDOR_NAME_ADDR, + SFP_EEPROM_VENDOR_NAME_SIZE, + (u8 *)vendor_name)) + vendor_name[0] = '\0'; + else + vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; + if (bnx2x_read_sfp_module_eeprom(phy, + params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_PART_NO_ADDR, + SFP_EEPROM_PART_NO_SIZE, + (u8 *)vendor_pn)) + vendor_pn[0] = '\0'; + else + vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0'; + + netdev_err(bp->dev, "Warning: Unqualified SFP+ module detected," + " Port %d from %s part number %s\n", + params->port, vendor_name, vendor_pn); + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG) + phy->flags |= FLAGS_SFP_NOT_APPROVED; + return -EINVAL; +} + +static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, + struct link_params *params) + +{ + u8 val; + int rc; + struct bnx2x *bp = params->bp; + u16 timeout; + /* Initialization time after hot-plug may take up to 300ms for + * some phys type ( e.g. JDSU ) + */ + + for (timeout = 0; timeout < 60; timeout++) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + rc = bnx2x_warpcore_read_sfp_module_eeprom( + phy, params, I2C_DEV_ADDR_A0, 1, 1, &val, + 1); + else + rc = bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, + 1, 1, &val); + if (rc == 0) { + DP(NETIF_MSG_LINK, + "SFP+ module initialization took %d ms\n", + timeout * 5); + return 0; + } + usleep_range(5000, 10000); + } + rc = bnx2x_read_sfp_module_eeprom(phy, params, I2C_DEV_ADDR_A0, + 1, 1, &val); + return rc; +} + +static void bnx2x_8727_power_module(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 is_power_up) { + /* Make sure GPIOs are not using for LED mode */ + u16 val; + /* In the GPIO register, bit 4 is use to determine if the GPIOs are + * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for + * output + * Bits 0-1 determine the GPIOs value for OUTPUT in case bit 4 val is 0 + * Bits 8-9 determine the GPIOs value for INPUT in case bit 4 val is 1 + * where the 1st bit is the over-current(only input), and 2nd bit is + * for power( only output ) + * + * In case of NOC feature is disabled and power is up, set GPIO control + * as input to enable listening of over-current indication + */ + if (phy->flags & FLAGS_NOC) + return; + if (is_power_up) + val = (1<<4); + else + /* Set GPIO control to OUTPUT, and set the power bit + * to according to the is_power_up + */ + val = (1<<1); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_GPIO_CTRL, + val); +} + +static int bnx2x_8726_set_limiting_mode(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 edc_mode) +{ + u16 cur_limiting_mode; + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + &cur_limiting_mode); + DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n", + cur_limiting_mode); + + if (edc_mode == EDC_MODE_LIMITING) { + DP(NETIF_MSG_LINK, "Setting LIMITING MODE\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + EDC_MODE_LIMITING); + } else { /* LRM mode ( default )*/ + + DP(NETIF_MSG_LINK, "Setting LRM MODE\n"); + + /* Changing to LRM mode takes quite few seconds. So do it only + * if current mode is limiting (default is LRM) + */ + if (cur_limiting_mode != EDC_MODE_LIMITING) + return 0; + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_LRM_MODE, + 0); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + 0x128); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL0, + 0x4008); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_LRM_MODE, + 0xaaaa); + } + return 0; +} + +static int bnx2x_8727_set_limiting_mode(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 edc_mode) +{ + u16 phy_identifier; + u16 rom_ver2_val; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + &phy_identifier); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + (phy_identifier & ~(1<<9))); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + &rom_ver2_val); + /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff)); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + (phy_identifier | (1<<9))); + + return 0; +} + +static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + u16 val; + switch (action) { + case DISABLE_TX: + bnx2x_sfp_set_transmitter(params, phy, 0); + break; + case ENABLE_TX: + if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) + bnx2x_sfp_set_transmitter(params, phy, 1); + break; + case PHY_INIT: + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + (1<<2) | (1<<5)); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, + 0); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0006); + /* Make MOD_ABS give interrupt on change */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + &val); + val |= (1<<12); + if (phy->flags & FLAGS_NOC) + val |= (3<<5); + /* Set 8727 GPIOs to input to allow reading from the 8727 GPIO0 + * status which reflect SFP+ module over-current + */ + if (!(phy->flags & FLAGS_NOC)) + val &= 0xff8f; /* Reset bits 4-6 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, + val); + break; + default: + DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n", + action); + return; + } +} + +static void bnx2x_set_e1e2_module_fault_led(struct link_params *params, + u8 gpio_mode) +{ + struct bnx2x *bp = params->bp; + + u32 fault_led_gpio = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].sfp_ctrl)) & + PORT_HW_CFG_FAULT_MODULE_LED_MASK; + switch (fault_led_gpio) { + case PORT_HW_CFG_FAULT_MODULE_LED_DISABLED: + return; + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO0: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO1: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO2: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO3: + { + u8 gpio_port = bnx2x_get_gpio_port(params); + u16 gpio_pin = fault_led_gpio - + PORT_HW_CFG_FAULT_MODULE_LED_GPIO0; + DP(NETIF_MSG_LINK, "Set fault module-detected led " + "pin %x port %x mode %x\n", + gpio_pin, gpio_port, gpio_mode); + bnx2x_set_gpio(bp, gpio_pin, gpio_mode, gpio_port); + } + break; + default: + DP(NETIF_MSG_LINK, "Error: Invalid fault led mode 0x%x\n", + fault_led_gpio); + } +} + +static void bnx2x_set_e3_module_fault_led(struct link_params *params, + u8 gpio_mode) +{ + u32 pin_cfg; + u8 port = params->port; + struct bnx2x *bp = params->bp; + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >> + PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT; + DP(NETIF_MSG_LINK, "Setting Fault LED to %d using pin cfg %d\n", + gpio_mode, pin_cfg); + bnx2x_set_cfg_pin(bp, pin_cfg, gpio_mode); +} + +static void bnx2x_set_sfp_module_fault_led(struct link_params *params, + u8 gpio_mode) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting SFP+ module fault LED to %d\n", gpio_mode); + if (CHIP_IS_E3(bp)) { + /* Low ==> if SFP+ module is supported otherwise + * High ==> if SFP+ module is not on the approved vendor list + */ + bnx2x_set_e3_module_fault_led(params, gpio_mode); + } else + bnx2x_set_e1e2_module_fault_led(params, gpio_mode); +} + +static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + bnx2x_warpcore_power_module(params, 0); + /* Put Warpcore in low power mode */ + REG_WR(bp, MISC_REG_WC0_RESET, 0x0c0e); + + /* Put LCPLL in low power mode */ + REG_WR(bp, MISC_REG_LCPLL_E40_PWRDWN, 1); + REG_WR(bp, MISC_REG_LCPLL_E40_RESETB_ANA, 0); + REG_WR(bp, MISC_REG_LCPLL_E40_RESETB_DIG, 0); +} + +static void bnx2x_power_sfp_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting SFP+ power to %x\n", power); + + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + bnx2x_8727_power_module(params->bp, phy, power); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + bnx2x_warpcore_power_module(params, power); + break; + default: + break; + } +} +static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, + struct bnx2x_phy *phy, + u16 edc_mode) +{ + u16 val = 0; + u16 mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; + struct bnx2x *bp = params->bp; + + u8 lane = bnx2x_get_warpcore_lane(phy, params); + /* This is a global register which controls all lanes */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + val &= ~(0xf << (lane << 2)); + + switch (edc_mode) { + case EDC_MODE_LINEAR: + case EDC_MODE_LIMITING: + mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; + break; + case EDC_MODE_PASSIVE_DAC: + case EDC_MODE_ACTIVE_DAC: + mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; + break; + default: + break; + } + + val |= (mode << (lane << 2)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, val); + /* A must read */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + + /* Restart microcode to re-read the new mode */ + bnx2x_warpcore_reset_lane(bp, phy, 1); + bnx2x_warpcore_reset_lane(bp, phy, 0); + +} + +static void bnx2x_set_limiting_mode(struct link_params *params, + struct bnx2x_phy *phy, + u16 edc_mode) +{ + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + bnx2x_8726_set_limiting_mode(params->bp, phy, edc_mode); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + bnx2x_8727_set_limiting_mode(params->bp, phy, edc_mode); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + bnx2x_warpcore_set_limiting_mode(params, phy, edc_mode); + break; + } +} + +static int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 edc_mode; + int rc = 0; + + u32 val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port].config)); + /* Enabled transmitter by default */ + bnx2x_sfp_set_transmitter(params, phy, 1); + DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n", + params->port); + /* Power up module */ + bnx2x_power_sfp_module(params, phy, 1); + if (bnx2x_get_edc_mode(phy, params, &edc_mode) != 0) { + DP(NETIF_MSG_LINK, "Failed to get valid module type\n"); + return -EINVAL; + } else if (bnx2x_verify_sfp_module(phy, params) != 0) { + /* Check SFP+ module compatibility */ + DP(NETIF_MSG_LINK, "Module verification failed!!\n"); + rc = -EINVAL; + /* Turn on fault module-detected led */ + bnx2x_set_sfp_module_fault_led(params, + MISC_REGISTERS_GPIO_HIGH); + + /* Check if need to power down the SFP+ module */ + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) { + DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n"); + bnx2x_power_sfp_module(params, phy, 0); + return rc; + } + } else { + /* Turn off fault module-detected led */ + bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW); + } + + /* Check and set limiting mode / LRM mode on 8726. On 8727 it + * is done automatically + */ + bnx2x_set_limiting_mode(params, phy, edc_mode); + + /* Disable transmit for this module if the module is not approved, and + * laser needs to be disabled. + */ + if ((rc) && + ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)) + bnx2x_sfp_set_transmitter(params, phy, 0); + + return rc; +} + +void bnx2x_handle_module_detect_int(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + struct bnx2x_phy *phy; + u32 gpio_val; + u8 gpio_num, gpio_port; + if (CHIP_IS_E3(bp)) { + phy = ¶ms->phy[INT_PHY]; + /* Always enable TX laser,will be disabled in case of fault */ + bnx2x_sfp_set_transmitter(params, phy, 1); + } else { + phy = ¶ms->phy[EXT_PHY1]; + } + if (bnx2x_get_mod_abs_int_cfg(bp, params->chip_id, params->shmem_base, + params->port, &gpio_num, &gpio_port) == + -EINVAL) { + DP(NETIF_MSG_LINK, "Failed to get MOD_ABS interrupt config\n"); + return; + } + + /* Set valid module led off */ + bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH); + + /* Get current gpio val reflecting module plugged in / out*/ + gpio_val = bnx2x_get_gpio(bp, gpio_num, gpio_port); + + /* Call the handling function in case module is detected */ + if (gpio_val == 0) { + bnx2x_set_mdio_emac_per_phy(bp, params); + bnx2x_set_aer_mmd(params, phy); + + bnx2x_power_sfp_module(params, phy, 1); + bnx2x_set_gpio_int(bp, gpio_num, + MISC_REGISTERS_GPIO_INT_OUTPUT_CLR, + gpio_port); + if (bnx2x_wait_for_sfp_module_initialized(phy, params) == 0) { + bnx2x_sfp_module_detection(phy, params); + if (CHIP_IS_E3(bp)) { + u16 rx_tx_in_reset; + /* In case WC is out of reset, reconfigure the + * link speed while taking into account 1G + * module limitation. + */ + bnx2x_cl45_read(bp, phy, + MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, + &rx_tx_in_reset); + if ((!rx_tx_in_reset) && + (params->link_flags & + PHY_INITIALIZED)) { + bnx2x_warpcore_reset_lane(bp, phy, 1); + bnx2x_warpcore_config_sfi(phy, params); + bnx2x_warpcore_reset_lane(bp, phy, 0); + } + } + } else { + DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); + } + } else { + bnx2x_set_gpio_int(bp, gpio_num, + MISC_REGISTERS_GPIO_INT_OUTPUT_SET, + gpio_port); + /* Module was plugged out. + * Disable transmit for this module + */ + phy->media_type = ETH_PHY_NOT_PRESENT; + } +} + +/******************************************************************/ +/* Used by 8706 and 8727 */ +/******************************************************************/ +static void bnx2x_sfp_mask_fault(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 alarm_status_offset, + u16 alarm_ctrl_offset) +{ + u16 alarm_status, val; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, alarm_status_offset, + &alarm_status); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, alarm_status_offset, + &alarm_status); + /* Mask or enable the fault event. */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, &val); + if (alarm_status & (1<<0)) + val &= ~(1<<0); + else + val |= (1<<0); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, val); +} +/******************************************************************/ +/* common BCM8706/BCM8726 PHY SECTION */ +/******************************************************************/ +static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u8 link_up = 0; + u16 val1, val2, rx_sd, pcs_status; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "XGXS 8706/8726\n"); + /* Clear RX Alarm*/ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); + + bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT, + MDIO_PMA_LASI_TXCTRL); + + /* Clear LASI indication*/ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); + DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); + + DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" + " link_status 0x%x\n", rx_sd, pcs_status, val2); + /* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status + * are set, or if the autoneg bit 1 is set + */ + link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); + if (link_up) { + if (val2 & (1<<1)) + vars->line_speed = SPEED_1000; + else + vars->line_speed = SPEED_10000; + bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + } + + /* Capture 10G link fault. Read twice to clear stale value. */ + if (vars->line_speed == SPEED_10000) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + if (val1 & (1<<0)) + vars->fault_detected = 1; + } + + return link_up; +} + +/******************************************************************/ +/* BCM8706 PHY SECTION */ +/******************************************************************/ +static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u32 tx_en_mode; + u16 cnt, val, tmp1; + struct bnx2x *bp = params->bp; + + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); + bnx2x_wait_reset_complete(bp, phy, params); + + /* Wait until fw is loaded */ + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &val); + if (val) + break; + usleep_range(10000, 20000); + } + DP(NETIF_MSG_LINK, "XGXS 8706 is initialized after %d ms\n", cnt); + if ((params->feature_config_flags & + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + u8 i; + u16 reg; + for (i = 0; i < 4; i++) { + reg = MDIO_XS_8706_REG_BANK_RX0 + + i*(MDIO_XS_8706_REG_BANK_RX1 - + MDIO_XS_8706_REG_BANK_RX0); + bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, reg, &val); + /* Clear first 3 bits of the control */ + val &= ~0x7; + /* Set control bits according to configuration */ + val |= (phy->rx_preemphasis[i] & 0x7); + DP(NETIF_MSG_LINK, "Setting RX Equalizer to BCM8706" + " reg 0x%x <-- val 0x%x\n", reg, val); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, reg, val); + } + } + /* Force speed */ + if (phy->req_line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n"); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_DIGITAL_CTRL, 0x400); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, + 0); + /* Arm LASI for link and Tx fault. */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3); + } else { + /* Force 1Gbps using autoneg with 1G advertisement */ + + /* Allow CL37 through CL73 */ + DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); + + /* Enable Full-Duplex advertisement on CL37 */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020); + /* Enable CL37 AN */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + /* 1G support */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_ADV, (1<<5)); + + /* Enable clause 73 AN */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + 0x0400); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, + 0x0004); + } + bnx2x_save_bcm_spirom_ver(bp, phy, params->port); + + /* If TX Laser is controlled by GPIO_0, do not let PHY go into low + * power mode, if TX Laser is disabled + */ + + tx_en_mode = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].sfp_ctrl)) + & PORT_HW_CFG_TX_LASER_MASK; + + if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { + DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n"); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, &tmp1); + tmp1 |= 0x1; + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, tmp1); + } + + return 0; +} + +static int bnx2x_8706_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + return bnx2x_8706_8726_read_status(phy, params, vars); +} + +/******************************************************************/ +/* BCM8726 PHY SECTION */ +/******************************************************************/ +static void bnx2x_8726_config_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n"); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001); +} + +static void bnx2x_8726_external_rom_boot(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + /* Need to wait 100ms after reset */ + msleep(100); + + /* Micro controller re-boot */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x018B); + + /* Set soft reset */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0001); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + + /* Wait for 150ms for microcode load */ + msleep(150); + + /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0000); + + msleep(200); + bnx2x_save_bcm_spirom_ver(bp, phy, params->port); +} + +static u8 bnx2x_8726_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val1; + u8 link_up = bnx2x_8706_8726_read_status(phy, params, vars); + if (link_up) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &val1); + if (val1 & (1<<15)) { + DP(NETIF_MSG_LINK, "Tx is disabled\n"); + link_up = 0; + vars->line_speed = 0; + } + } + return link_up; +} + + +static int bnx2x_8726_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Initializing BCM8726\n"); + + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); + bnx2x_wait_reset_complete(bp, phy, params); + + bnx2x_8726_external_rom_boot(phy, params); + + /* Need to call module detected on initialization since the module + * detection triggered by actual module insertion might occur before + * driver is loaded, and when driver is loaded, it reset all + * registers, including the transmitter + */ + bnx2x_sfp_module_detection(phy, params); + + if (phy->req_line_speed == SPEED_1000) { + DP(NETIF_MSG_LINK, "Setting 1G force\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + 0x400); + } else if ((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) && + ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { + DP(NETIF_MSG_LINK, "Setting 1G clause37\n"); + /* Set Flow control */ + bnx2x_ext_phy_set_pause(params, phy, vars); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, 0x0020); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + /* Enable RX-ALARM control to receive interrupt for 1G speed + * change + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + 0x400); + + } else { /* Default 10G. Set only LASI control */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1); + } + + /* Set TX PreEmphasis if needed */ + if ((params->feature_config_flags & + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + DP(NETIF_MSG_LINK, + "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n", + phy->tx_preemphasis[0], + phy->tx_preemphasis[1]); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8726_TX_CTRL1, + phy->tx_preemphasis[0]); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8726_TX_CTRL2, + phy->tx_preemphasis[1]); + } + + return 0; + +} + +static void bnx2x_8726_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "bnx2x_8726_link_reset port %d\n", params->port); + /* Set serial boot control for external load */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, 0x0001); +} + +/******************************************************************/ +/* BCM8727 PHY SECTION */ +/******************************************************************/ + +static void bnx2x_8727_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + u16 led_mode_bitmask = 0; + u16 gpio_pins_bitmask = 0; + u16 val; + /* Only NOC flavor requires to set the LED specifically */ + if (!(phy->flags & FLAGS_NOC)) + return; + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + led_mode_bitmask = 0; + gpio_pins_bitmask = 0x03; + break; + case LED_MODE_ON: + led_mode_bitmask = 0; + gpio_pins_bitmask = 0x02; + break; + case LED_MODE_OPER: + led_mode_bitmask = 0x60; + gpio_pins_bitmask = 0x11; + break; + } + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + &val); + val &= 0xff8f; + val |= led_mode_bitmask; + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + val); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_GPIO_CTRL, + &val); + val &= 0xffe0; + val |= gpio_pins_bitmask; + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_GPIO_CTRL, + val); +} +static void bnx2x_8727_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) { + u32 swap_val, swap_override; + u8 port; + /* The PHY reset is controlled by GPIO 1. Fake the port number + * to cancel the swap done in set_gpio() + */ + struct bnx2x *bp = params->bp; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port = (swap_val && swap_override) ^ 1; + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); +} + +static void bnx2x_8727_config_speed(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 tmp1, val; + /* Set option 1G speed */ + if ((phy->req_line_speed == SPEED_1000) || + (phy->media_type == ETH_PHY_SFP_1G_FIBER)) { + DP(NETIF_MSG_LINK, "Setting 1G force\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1); + DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1); + /* Power down the XAUI until link is up in case of dual-media + * and 1G + */ + if (DUAL_MEDIA(params)) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, &val); + val |= (3<<10); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, val); + } + } else if ((phy->req_line_speed == SPEED_AUTO_NEG) && + ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) && + ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { + + DP(NETIF_MSG_LINK, "Setting 1G clause37\n"); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300); + } else { + /* Since the 8727 has only single reset pin, need to set the 10G + * registers although it is default + */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, + 0x0020); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x0100); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, + 0x0008); + } +} + +static int bnx2x_8727_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u32 tx_en_mode; + u16 tmp1, mod_abs, tmp2; + struct bnx2x *bp = params->bp; + /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ + + bnx2x_wait_reset_complete(bp, phy, params); + + DP(NETIF_MSG_LINK, "Initializing BCM8727\n"); + + bnx2x_8727_specific_func(phy, params, PHY_INIT); + /* Initially configure MOD_ABS to interrupt when module is + * presence( bit 8) + */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); + /* Set EDC off by setting OPTXLOS signal input to low (bit 9). + * When the EDC is off it locks onto a reference clock and avoids + * becoming 'lost' + */ + mod_abs &= ~(1<<8); + if (!(phy->flags & FLAGS_NOC)) + mod_abs &= ~(1<<9); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Enable/Disable PHY transmitter output */ + bnx2x_set_disable_pmd_transmit(params, phy, 0); + + bnx2x_8727_power_module(bp, phy, 1); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); + + bnx2x_8727_config_speed(phy, params); + + + /* Set TX PreEmphasis if needed */ + if ((params->feature_config_flags & + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n", + phy->tx_preemphasis[0], + phy->tx_preemphasis[1]); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1, + phy->tx_preemphasis[0]); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL2, + phy->tx_preemphasis[1]); + } + + /* If TX Laser is controlled by GPIO_0, do not let PHY go into low + * power mode, if TX Laser is disabled + */ + tx_en_mode = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].sfp_ctrl)) + & PORT_HW_CFG_TX_LASER_MASK; + + if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { + + DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n"); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, &tmp2); + tmp2 |= 0x1000; + tmp2 &= 0xFFEF; + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &tmp2); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + (tmp2 & 0x7fff)); + } + + return 0; +} + +static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 mod_abs, rx_alarm_status; + u32 val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port]. + config)); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); + if (mod_abs & (1<<8)) { + + /* Module is absent */ + DP(NETIF_MSG_LINK, + "MOD_ABS indication show module is absent\n"); + phy->media_type = ETH_PHY_NOT_PRESENT; + /* 1. Set mod_abs to detect next module + * presence event + * 2. Set EDC off by setting OPTXLOS signal input to low + * (bit 9). + * When the EDC is off it locks onto a reference clock and + * avoids becoming 'lost'. + */ + mod_abs &= ~(1<<8); + if (!(phy->flags & FLAGS_NOC)) + mod_abs &= ~(1<<9); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Clear RX alarm since it stays up as long as + * the mod_abs wasn't changed + */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + + } else { + /* Module is present */ + DP(NETIF_MSG_LINK, + "MOD_ABS indication show module is present\n"); + /* First disable transmitter, and if the module is ok, the + * module_detection will enable it + * 1. Set mod_abs to detect next module absent event ( bit 8) + * 2. Restore the default polarity of the OPRXLOS signal and + * this signal will then correctly indicate the presence or + * absence of the Rx signal. (bit 9) + */ + mod_abs |= (1<<8); + if (!(phy->flags & FLAGS_NOC)) + mod_abs |= (1<<9); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Clear RX alarm since it stays up as long as the mod_abs + * wasn't changed. This is need to be done before calling the + * module detection, otherwise it will clear* the link update + * alarm + */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + + + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + bnx2x_sfp_set_transmitter(params, phy, 0); + + if (bnx2x_wait_for_sfp_module_initialized(phy, params) == 0) + bnx2x_sfp_module_detection(phy, params); + else + DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); + + /* Reconfigure link speed based on module type limitations */ + bnx2x_8727_config_speed(phy, params); + } + + DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", + rx_alarm_status); + /* No need to check link status in case of module plugged in/out */ +} + +static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) + +{ + struct bnx2x *bp = params->bp; + u8 link_up = 0, oc_port = params->port; + u16 link_status = 0; + u16 rx_alarm_status, lasi_ctrl, val1; + + /* If PHY is not initialized, do not check link status */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, + &lasi_ctrl); + if (!lasi_ctrl) + return 0; + + /* Check the LASI on Rx */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, + &rx_alarm_status); + vars->line_speed = 0; + DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", rx_alarm_status); + + bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT, + MDIO_PMA_LASI_TXCTRL); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + + DP(NETIF_MSG_LINK, "8727 LASI status 0x%x\n", val1); + + /* Clear MSG-OUT */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); + + /* If a module is present and there is need to check + * for over current + */ + if (!(phy->flags & FLAGS_NOC) && !(rx_alarm_status & (1<<5))) { + /* Check over-current using 8727 GPIO0 input*/ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, + &val1); + + if ((val1 & (1<<8)) == 0) { + if (!CHIP_IS_E1x(bp)) + oc_port = BP_PATH(bp) + (params->port << 1); + DP(NETIF_MSG_LINK, + "8727 Power fault has been detected on port %d\n", + oc_port); + netdev_err(bp->dev, "Error: Power fault on Port %d has " + "been detected and the power to " + "that SFP+ module has been removed " + "to prevent failure of the card. " + "Please remove the SFP+ module and " + "restart the system to clear this " + "error.\n", + oc_port); + /* Disable all RX_ALARMs except for mod_abs */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXCTRL, (1<<5)); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &val1); + /* Wait for module_absent_event */ + val1 |= (1<<8); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, val1); + /* Clear RX alarm */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + bnx2x_8727_power_module(params->bp, phy, 0); + return 0; + } + } /* Over current check */ + + /* When module absent bit is set, check module */ + if (rx_alarm_status & (1<<5)) { + bnx2x_8727_handle_mod_abs(phy, params); + /* Enable all mod_abs and link detection bits */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + ((1<<5) | (1<<2))); + } + + if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) { + DP(NETIF_MSG_LINK, "Enabling 8727 TX laser\n"); + bnx2x_sfp_set_transmitter(params, phy, 1); + } else { + DP(NETIF_MSG_LINK, "Tx is disabled\n"); + return 0; + } + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &link_status); + + /* Bits 0..2 --> speed detected, + * Bits 13..15--> link is down + */ + if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) { + link_up = 1; + vars->line_speed = SPEED_10000; + DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n", + params->port); + } else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) { + link_up = 1; + vars->line_speed = SPEED_1000; + DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n", + params->port); + } else { + link_up = 0; + DP(NETIF_MSG_LINK, "port %x: External link is down\n", + params->port); + } + + /* Capture 10G link fault. */ + if (vars->line_speed == SPEED_10000) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + + if (val1 & (1<<0)) { + vars->fault_detected = 1; + } + } + + if (link_up) { + bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + DP(NETIF_MSG_LINK, "duplex = 0x%x\n", vars->duplex); + } + + if ((DUAL_MEDIA(params)) && + (phy->req_line_speed == SPEED_1000)) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, &val1); + /* In case of dual-media board and 1G, power up the XAUI side, + * otherwise power it down. For 10G it is done automatically + */ + if (link_up) + val1 &= ~(3<<10); + else + val1 |= (3<<10); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, val1); + } + return link_up; +} + +static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + + /* Enable/Disable PHY transmitter output */ + bnx2x_set_disable_pmd_transmit(params, phy, 1); + + /* Disable Transmitter */ + bnx2x_sfp_set_transmitter(params, phy, 0); + /* Clear LASI */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0); + +} + +/******************************************************************/ +/* BCM8481/BCM84823/BCM84833 PHY SECTION */ +/******************************************************************/ +static int bnx2x_is_8483x_8485x(struct bnx2x_phy *phy) +{ + return ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858)); +} + +static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, + struct bnx2x *bp, + u8 port) +{ + u16 val, fw_ver2, cnt, i; + static struct bnx2x_reg_set reg_set[] = { + {MDIO_PMA_DEVAD, 0xA819, 0x0014}, + {MDIO_PMA_DEVAD, 0xA81A, 0xc200}, + {MDIO_PMA_DEVAD, 0xA81B, 0x0000}, + {MDIO_PMA_DEVAD, 0xA81C, 0x0300}, + {MDIO_PMA_DEVAD, 0xA817, 0x0009} + }; + u16 fw_ver1; + + if (bnx2x_is_8483x_8485x(phy)) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1); + if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) + fw_ver1 &= 0xfff; + bnx2x_save_spirom_version(bp, port, fw_ver1, phy->ver_addr); + } else { + /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ + /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, + reg_set[i].reg, reg_set[i].val); + + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + udelay(5); + } + if (cnt == 100) { + DP(NETIF_MSG_LINK, "Unable to read 848xx " + "phy fw version(1)\n"); + bnx2x_save_spirom_version(bp, port, 0, + phy->ver_addr); + return; + } + + + /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + udelay(5); + } + if (cnt == 100) { + DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw " + "version(2)\n"); + bnx2x_save_spirom_version(bp, port, 0, + phy->ver_addr); + return; + } + + /* lower 16 bits of the register SPI_FW_STATUS */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); + /* upper 16 bits of register SPI_FW_STATUS */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); + + bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1, + phy->ver_addr); + } + +} +static void bnx2x_848xx_set_led(struct bnx2x *bp, + struct bnx2x_phy *phy) +{ + u16 val, led3_blink_rate, offset, i; + static struct bnx2x_reg_set reg_set[] = { + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x0080}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED2_MASK, 0x0018}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_MASK, 0x0006}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH, + MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ}, + {MDIO_AN_DEVAD, 0xFFFB, 0xFFFD} + }; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) { + /* Set LED5 source */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, + 0x90); + led3_blink_rate = 0x000f; + } else { + led3_blink_rate = 0x0000; + } + /* Set LED3 BLINK */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_BLINK, + led3_blink_rate); + + /* PHYC_CTL_LED_CTL */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + val &= 0xFE00; + val |= 0x0092; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) + val |= 2 << 12; /* LED5 ON based on source */ + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, val); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + if (bnx2x_is_8483x_8485x(phy)) + offset = MDIO_PMA_REG_84833_CTL_LED_CTL_1; + else + offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) + val = MDIO_PMA_REG_84858_ALLOW_GPHY_ACT | + MDIO_PMA_REG_84823_LED3_STRETCH_EN; + else + val = MDIO_PMA_REG_84823_LED3_STRETCH_EN; + + /* stretch_en for LEDs */ + bnx2x_cl45_read_or_write(bp, phy, + MDIO_PMA_DEVAD, + offset, + val); +} + +static void bnx2x_848xx_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + switch (action) { + case PHY_INIT: + if (bnx2x_is_8483x_8485x(phy)) { + /* Save spirom version */ + bnx2x_save_848xx_spirom_version(phy, bp, params->port); + } + /* This phy uses the NIG latch mechanism since link indication + * arrives through its LED4 and not via its LASI signal, so we + * get steady signal instead of clear on read + */ + bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, + 1 << NIG_LATCH_BC_ENABLE_MI_INT); + + bnx2x_848xx_set_led(bp, phy); + break; + } +} + +static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 autoneg_val, an_1000_val, an_10_100_val; + + bnx2x_848xx_specific_func(phy, params, PHY_INIT); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000); + + /* set 1000 speed advertisement */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, + &an_1000_val); + + bnx2x_ext_phy_set_pause(params, phy, vars); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, + &an_10_100_val); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &autoneg_val); + /* Disable forced speed */ + autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); + an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8)); + + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == SPEED_1000)) { + an_1000_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + if (phy->req_duplex == DUPLEX_FULL) + an_1000_val |= (1<<9); + DP(NETIF_MSG_LINK, "Advertising 1G\n"); + } else + an_1000_val &= ~((1<<8) | (1<<9)); + + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, + an_1000_val); + + /* Set 10/100 speed advertisement */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); + an_10_100_val |= (1<<8); + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } + + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); + an_10_100_val |= (1<<7); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->supported & SUPPORTED_10baseT_Full)) { + an_10_100_val |= (1<<6); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) && + (phy->supported & SUPPORTED_10baseT_Half)) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } + } + + /* Only 10/100 are allowed to work in FORCE mode */ + if ((phy->req_line_speed == SPEED_100) && + (phy->supported & + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full))) { + autoneg_val |= (1<<13); + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, + (1<<15 | 1<<9 | 7<<0)); + /* The PHY needs this set even for forced link. */ + an_10_100_val |= (1<<8) | (1<<7); + DP(NETIF_MSG_LINK, "Setting 100M force\n"); + } + if ((phy->req_line_speed == SPEED_10) && + (phy->supported & + (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full))) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 10M force\n"); + } + + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_AN_ADV, + an_10_100_val); + + if (phy->req_duplex == DUPLEX_FULL) + autoneg_val |= (1<<8); + + /* Always write this if this is not 84833/4. + * For 84833/4, write it only when it's a forced speed. + */ + if (!bnx2x_is_8483x_8485x(phy) || + ((autoneg_val & (1<<12)) == 0)) + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val); + + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (phy->req_line_speed == SPEED_10000)) { + DP(NETIF_MSG_LINK, "Advertising 10G\n"); + /* Restart autoneg for 10G*/ + + bnx2x_cl45_read_or_write( + bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, + 0x1000); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, + 0x3200); + } else + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, + 1); + + return 0; +} + +static int bnx2x_8481_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_wait_reset_complete(bp, phy, params); + + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); + return bnx2x_848xx_cmn_config_init(phy, params, vars); +} + +#define PHY848xx_CMDHDLR_WAIT 300 +#define PHY848xx_CMDHDLR_MAX_ARGS 5 + +static int bnx2x_84858_cmd_hdlr(struct bnx2x_phy *phy, + struct link_params *params, + u16 fw_cmd, + u16 cmd_args[], int argc) +{ + int idx; + u16 val; + struct bnx2x *bp = params->bp; + + /* Step 1: Poll the STATUS register to see whether the previous command + * is in progress or the system is busy (CMD_IN_PROGRESS or + * SYSTEM_BUSY). If previous command is in progress or system is busy, + * check again until the previous command finishes execution and the + * system is available for taking command + */ + + for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, &val); + if ((val != PHY84858_STATUS_CMD_IN_PROGRESS) && + (val != PHY84858_STATUS_CMD_SYSTEM_BUSY)) + break; + usleep_range(1000, 2000); + } + if (idx >= PHY848xx_CMDHDLR_WAIT) { + DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n"); + return -EINVAL; + } + + /* Step2: If any parameters are required for the function, write them + * to the required DATA registers + */ + + for (idx = 0; idx < argc; idx++) { + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_DATA1 + idx, + cmd_args[idx]); + } + + /* Step3: When the firmware is ready for commands, write the 'Command + * code' to the CMD register + */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd); + + /* Step4: Once the command has been written, poll the STATUS register + * to check whether the command has completed (CMD_COMPLETED_PASS/ + * CMD_FOR_CMDS or CMD_COMPLETED_ERROR). + */ + + for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, &val); + if ((val == PHY84858_STATUS_CMD_COMPLETE_PASS) || + (val == PHY84858_STATUS_CMD_COMPLETE_ERROR)) + break; + usleep_range(1000, 2000); + } + if ((idx >= PHY848xx_CMDHDLR_WAIT) || + (val == PHY84858_STATUS_CMD_COMPLETE_ERROR)) { + DP(NETIF_MSG_LINK, "FW cmd failed.\n"); + return -EINVAL; + } + /* Step5: Once the command has completed, read the specficied DATA + * registers for any saved results for the command, if applicable + */ + + /* Gather returning data */ + for (idx = 0; idx < argc; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_DATA1 + idx, + &cmd_args[idx]); + } + + return 0; +} + +static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy, + struct link_params *params, u16 fw_cmd, + u16 cmd_args[], int argc, int process) +{ + int idx; + u16 val; + struct bnx2x *bp = params->bp; + int rc = 0; + + if (process == PHY84833_MB_PROCESS2) { + /* Write CMD_OPEN_OVERRIDE to STATUS reg */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, + PHY84833_STATUS_CMD_OPEN_OVERRIDE); + } + + for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, &val); + if (val == PHY84833_STATUS_CMD_OPEN_FOR_CMDS) + break; + usleep_range(1000, 2000); + } + if (idx >= PHY848xx_CMDHDLR_WAIT) { + DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n"); + /* if the status is CMD_COMPLETE_PASS or CMD_COMPLETE_ERROR + * clear the status to CMD_CLEAR_COMPLETE + */ + if (val == PHY84833_STATUS_CMD_COMPLETE_PASS || + val == PHY84833_STATUS_CMD_COMPLETE_ERROR) { + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, + PHY84833_STATUS_CMD_CLEAR_COMPLETE); + } + return -EINVAL; + } + if (process == PHY84833_MB_PROCESS1 || + process == PHY84833_MB_PROCESS2) { + /* Prepare argument(s) */ + for (idx = 0; idx < argc; idx++) { + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_DATA1 + idx, + cmd_args[idx]); + } + } + + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd); + for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, &val); + if ((val == PHY84833_STATUS_CMD_COMPLETE_PASS) || + (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) + break; + usleep_range(1000, 2000); + } + if ((idx >= PHY848xx_CMDHDLR_WAIT) || + (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) { + DP(NETIF_MSG_LINK, "FW cmd failed.\n"); + rc = -EINVAL; + } + if (process == PHY84833_MB_PROCESS3 && rc == 0) { + /* Gather returning data */ + for (idx = 0; idx < argc; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_DATA1 + idx, + &cmd_args[idx]); + } + } + if (val == PHY84833_STATUS_CMD_COMPLETE_ERROR || + val == PHY84833_STATUS_CMD_COMPLETE_PASS) { + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_848xx_CMD_HDLR_STATUS, + PHY84833_STATUS_CMD_CLEAR_COMPLETE); + } + return rc; +} + +static int bnx2x_848xx_cmd_hdlr(struct bnx2x_phy *phy, + struct link_params *params, + u16 fw_cmd, + u16 cmd_args[], int argc, + int process) +{ + struct bnx2x *bp = params->bp; + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) || + (REG_RD(bp, params->shmem2_base + + offsetof(struct shmem2_region, + link_attr_sync[params->port])) & + LINK_ATTR_84858)) { + return bnx2x_84858_cmd_hdlr(phy, params, fw_cmd, cmd_args, + argc); + } else { + return bnx2x_84833_cmd_hdlr(phy, params, fw_cmd, cmd_args, + argc, process); + } +} + +static int bnx2x_848xx_pair_swap_cfg(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u32 pair_swap; + u16 data[PHY848xx_CMDHDLR_MAX_ARGS]; + int status; + struct bnx2x *bp = params->bp; + + /* Check for configuration. */ + pair_swap = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].xgbt_phy_cfg)) & + PORT_HW_CFG_RJ45_PAIR_SWAP_MASK; + + if (pair_swap == 0) + return 0; + + /* Only the second argument is used for this command */ + data[1] = (u16)pair_swap; + + status = bnx2x_848xx_cmd_hdlr(phy, params, + PHY848xx_CMD_SET_PAIR_SWAP, data, + 2, PHY84833_MB_PROCESS2); + if (status == 0) + DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data[1]); + + return status; +} + +static u8 bnx2x_84833_get_reset_gpios(struct bnx2x *bp, + u32 shmem_base_path[], + u32 chip_id) +{ + u32 reset_pin[2]; + u32 idx; + u8 reset_gpios; + if (CHIP_IS_E3(bp)) { + /* Assume that these will be GPIOs, not EPIOs. */ + for (idx = 0; idx < 2; idx++) { + /* Map config param to register bit. */ + reset_pin[idx] = REG_RD(bp, shmem_base_path[idx] + + offsetof(struct shmem_region, + dev_info.port_hw_config[0].e3_cmn_pin_cfg)); + reset_pin[idx] = (reset_pin[idx] & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + reset_pin[idx] -= PIN_CFG_GPIO0_P0; + reset_pin[idx] = (1 << reset_pin[idx]); + } + reset_gpios = (u8)(reset_pin[0] | reset_pin[1]); + } else { + /* E2, look from diff place of shmem. */ + for (idx = 0; idx < 2; idx++) { + reset_pin[idx] = REG_RD(bp, shmem_base_path[idx] + + offsetof(struct shmem_region, + dev_info.port_hw_config[0].default_cfg)); + reset_pin[idx] &= PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK; + reset_pin[idx] -= PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0; + reset_pin[idx] >>= PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT; + reset_pin[idx] = (1 << reset_pin[idx]); + } + reset_gpios = (u8)(reset_pin[0] | reset_pin[1]); + } + + return reset_gpios; +} + +static int bnx2x_84833_hw_reset_phy(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 reset_gpios; + u32 other_shmem_base_addr = REG_RD(bp, params->shmem2_base + + offsetof(struct shmem2_region, + other_shmem_base_addr)); + + u32 shmem_base_path[2]; + + /* Work around for 84833 LED failure inside RESET status */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + MDIO_AN_REG_8481_MII_CTRL_FORCE_1G); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, + MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF); + + shmem_base_path[0] = params->shmem_base; + shmem_base_path[1] = other_shmem_base_addr; + + reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, + params->chip_id); + + bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); + udelay(10); + DP(NETIF_MSG_LINK, "84833 hw reset on pin values 0x%x\n", + reset_gpios); + + return 0; +} + +static int bnx2x_8483x_disable_eee(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + int rc; + struct bnx2x *bp = params->bp; + u16 cmd_args = 0; + + DP(NETIF_MSG_LINK, "Don't Advertise 10GBase-T EEE\n"); + + /* Prevent Phy from working in EEE and advertising it */ + rc = bnx2x_848xx_cmd_hdlr(phy, params, PHY848xx_CMD_SET_EEE_MODE, + &cmd_args, 1, PHY84833_MB_PROCESS1); + if (rc) { + DP(NETIF_MSG_LINK, "EEE disable failed.\n"); + return rc; + } + + return bnx2x_eee_disable(phy, params, vars); +} + +static int bnx2x_8483x_enable_eee(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + int rc; + struct bnx2x *bp = params->bp; + u16 cmd_args = 1; + + rc = bnx2x_848xx_cmd_hdlr(phy, params, PHY848xx_CMD_SET_EEE_MODE, + &cmd_args, 1, PHY84833_MB_PROCESS1); + if (rc) { + DP(NETIF_MSG_LINK, "EEE enable failed.\n"); + return rc; + } + + return bnx2x_eee_advertise(phy, params, vars, SHMEM_EEE_10G_ADV); +} + +#define PHY84833_CONSTANT_LATENCY 1193 +static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port, initialize = 1; + u16 val; + u32 actual_phy_selection; + u16 cmd_args[PHY848xx_CMDHDLR_MAX_ARGS]; + int rc = 0; + + usleep_range(1000, 2000); + + if (!(CHIP_IS_E1x(bp))) + port = BP_PATH(bp); + else + port = params->port; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, + port); + } else { + /* MDIO reset */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x8000); + } + + bnx2x_wait_reset_complete(bp, phy, params); + + /* Wait for GPHY to come out of reset */ + msleep(50); + if (!bnx2x_is_8483x_8485x(phy)) { + /* BCM84823 requires that XGXS links up first @ 10G for normal + * behavior. + */ + u16 temp; + temp = vars->line_speed; + vars->line_speed = SPEED_10000; + bnx2x_set_autoneg(¶ms->phy[INT_PHY], params, vars, 0); + bnx2x_program_serdes(¶ms->phy[INT_PHY], params, vars); + vars->line_speed = temp; + } + /* Check if this is actually BCM84858 */ + if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) { + u16 hw_rev; + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_848xx_ID_MSB, &hw_rev); + if (hw_rev == BCM84858_PHY_ID) { + params->link_attr_sync |= LINK_ATTR_84858; + bnx2x_update_link_attr(params, params->link_attr_sync); + } + } + + /* Set dual-media configuration according to configuration */ + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_MEDIA, &val); + val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | + MDIO_CTL_REG_84823_MEDIA_LINE_MASK | + MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN | + MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK | + MDIO_CTL_REG_84823_MEDIA_FIBER_1G); + + if (CHIP_IS_E3(bp)) { + val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | + MDIO_CTL_REG_84823_MEDIA_LINE_MASK); + } else { + val |= (MDIO_CTL_REG_84823_CTRL_MAC_XFI | + MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L); + } + + actual_phy_selection = bnx2x_phy_selection(params); + + switch (actual_phy_selection) { + case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: + /* Do nothing. Essentially this is like the priority copper */ + break; + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER; + break; + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: + /* Do nothing here. The first PHY won't be initialized at all */ + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: + val |= MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN; + initialize = 0; + break; + } + if (params->phy[EXT_PHY2].req_line_speed == SPEED_1000) + val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G; + + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_MEDIA, val); + DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n", + params->multi_phy_config, val); + + if (bnx2x_is_8483x_8485x(phy)) { + bnx2x_848xx_pair_swap_cfg(phy, params, vars); + + /* Keep AutogrEEEn disabled. */ + cmd_args[0] = 0x0; + cmd_args[1] = 0x0; + cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1; + cmd_args[3] = PHY84833_CONSTANT_LATENCY; + rc = bnx2x_848xx_cmd_hdlr(phy, params, + PHY848xx_CMD_SET_EEE_MODE, cmd_args, + 4, PHY84833_MB_PROCESS1); + if (rc) + DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n"); + } + if (initialize) + rc = bnx2x_848xx_cmn_config_init(phy, params, vars); + else + bnx2x_save_848xx_spirom_version(phy, bp, params->port); + /* 84833 PHY has a better feature and doesn't need to support this. */ + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { + u32 cms_enable = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_ENABLE_CMS_MASK; + + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_USER_CTRL_REG, &val); + if (cms_enable) + val |= MDIO_CTL_REG_84823_USER_CTRL_CMS; + else + val &= ~MDIO_CTL_REG_84823_USER_CTRL_CMS; + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_USER_CTRL_REG, val); + } + + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_FW_REV, &val); + + /* Configure EEE support */ + if ((val >= MDIO_84833_TOP_CFG_FW_EEE) && + (val != MDIO_84833_TOP_CFG_FW_NO_EEE) && + bnx2x_eee_has_cap(params)) { + rc = bnx2x_eee_initial_config(params, vars, SHMEM_EEE_10G_ADV); + if (rc) { + DP(NETIF_MSG_LINK, "Failed to configure EEE timers\n"); + bnx2x_8483x_disable_eee(phy, params, vars); + return rc; + } + + if ((phy->req_duplex == DUPLEX_FULL) && + (params->eee_mode & EEE_MODE_ADV_LPI) && + (bnx2x_eee_calc_timer(params) || + !(params->eee_mode & EEE_MODE_ENABLE_LPI))) + rc = bnx2x_8483x_enable_eee(phy, params, vars); + else + rc = bnx2x_8483x_disable_eee(phy, params, vars); + if (rc) { + DP(NETIF_MSG_LINK, "Failed to set EEE advertisement\n"); + return rc; + } + } else { + vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK; + } + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { + /* Additional settings for jumbo packets in 1000BASE-T mode */ + /* Allow rx extended length */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, &val); + val |= 0x4000; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, val); + /* TX FIFO Elasticity LSB */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, &val); + val |= 0x1; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, val); + /* TX FIFO Elasticity MSB */ + /* Enable expansion register 0x46 (Pattern Generator status) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf46); + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, &val); + val |= 0x4000; + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, val); + } + + if (bnx2x_is_8483x_8485x(phy)) { + /* Bring PHY out of super isolate mode as the final step. */ + bnx2x_cl45_read_and_write(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, + (u16)~MDIO_84833_SUPER_ISOLATE); + } + return rc; +} + +static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val, val1, val2; + u8 link_up = 0; + + + /* Check 10G-BaseT link status */ + /* Check PMD signal ok */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, 0xFFFA, &val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, + &val2); + DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2); + + /* Check link 10G */ + if (val2 & (1<<11)) { + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + link_up = 1; + bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); + } else { /* Check Legacy speed link */ + u16 legacy_status, legacy_speed; + + /* Enable expansion register 0x42 (Operation mode status) */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf42); + + /* Get legacy speed operation status */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, + &legacy_status); + + DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n", + legacy_status); + link_up = ((legacy_status & (1<<11)) == (1<<11)); + legacy_speed = (legacy_status & (3<<9)); + if (legacy_speed == (0<<9)) + vars->line_speed = SPEED_10; + else if (legacy_speed == (1<<9)) + vars->line_speed = SPEED_100; + else if (legacy_speed == (2<<9)) + vars->line_speed = SPEED_1000; + else { /* Should not happen: Treat as link down */ + vars->line_speed = 0; + link_up = 0; + } + + if (link_up) { + if (legacy_status & (1<<8)) + vars->duplex = DUPLEX_FULL; + else + vars->duplex = DUPLEX_HALF; + + DP(NETIF_MSG_LINK, + "Link is up in %dMbps, is_duplex_full= %d\n", + vars->line_speed, + (vars->duplex == DUPLEX_FULL)); + /* Check legacy speed AN resolution */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_STATUS, + &val); + if (val & (1<<5)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_EXPANSION, + &val); + if ((val & (1<<0)) == 0) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + } + } + if (link_up) { + DP(NETIF_MSG_LINK, "BCM848x3: link speed is %d\n", + vars->line_speed); + bnx2x_ext_phy_resolve_fc(phy, params, vars); + + /* Read LP advertised speeds */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &val); + if (val & (1<<5)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10THD_CAPABLE; + if (val & (1<<6)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE; + if (val & (1<<7)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE; + if (val & (1<<8)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE; + if (val & (1<<9)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100T4_CAPABLE; + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_1000T_STATUS, &val); + + if (val & (1<<10)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE; + if (val & (1<<11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_MASTER_STATUS, &val); + + if (val & (1<<11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + /* Determine if EEE was negotiated */ + if (bnx2x_is_8483x_8485x(phy)) + bnx2x_eee_an_resolve(phy, params, vars); + } + + return link_up; +} + +static int bnx2x_8485x_format_ver(u32 raw_ver, u8 *str, u16 *len) +{ + u32 num; + + num = ((raw_ver & 0xF80) >> 7) << 16 | ((raw_ver & 0x7F) << 8) | + ((raw_ver & 0xF000) >> 12); + return bnx2x_3_seq_format_ver(num, str, len); +} + +static int bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len) +{ + u32 spirom_ver; + + spirom_ver = ((raw_ver & 0xF80) >> 7) << 16 | (raw_ver & 0x7F); + return bnx2x_format_ver(spirom_ver, str, len); +} + +static void bnx2x_8481_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, 0); + bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, 1); +} + +static void bnx2x_8481_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + bnx2x_cl45_write(params->bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); + bnx2x_cl45_write(params->bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1); +} + +static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 port; + u16 val16; + + if (!(CHIP_IS_E1x(bp))) + port = BP_PATH(bp); + else + port = params->port; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + port); + } else { + bnx2x_cl45_read(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val16); + val16 |= MDIO_84833_SUPER_ISOLATE; + bnx2x_cl45_write(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, val16); + } +} + +static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + u16 val; + u8 port; + + if (!(CHIP_IS_E1x(bp))) + port = BP_PATH(bp); + else + port = params->port; + + switch (mode) { + case LED_MODE_OFF: + + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + + /* Set LED masks */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, + 0x0); + + } else { + /* LED 1 OFF */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x0); + + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) { + /* LED 2 OFF */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x0); + /* LED 3 OFF */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x0); + } + } + break; + case LED_MODE_FRONT_PANEL_OFF: + + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE FRONT PANEL OFF\n", + port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + + /* Set LED masks */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, + 0x20); + + } else { + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x0); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) { + /* Disable MI_INT interrupt before setting LED4 + * source to constant off. + */ + if (REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4) & + NIG_MASK_MI_INT) { + params->link_flags |= + LINK_FLAGS_INT_DISABLED; + + bnx2x_bits_dis( + bp, + NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4, + NIG_MASK_MI_INT); + } + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x0); + } + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) { + /* LED 2 OFF */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x0); + /* LED 3 OFF */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x0); + } + } + break; + case LED_MODE_ON: + + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + /* Set control reg */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + val &= 0x8000; + val |= 0x2492; + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val); + + /* Set LED masks */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x0); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x20); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x20); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, + 0x0); + } else { + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x20); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) { + /* Disable MI_INT interrupt before setting LED4 + * source to constant on. + */ + if (REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4) & + NIG_MASK_MI_INT) { + params->link_flags |= + LINK_FLAGS_INT_DISABLED; + + bnx2x_bits_dis( + bp, + NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4, + NIG_MASK_MI_INT); + } + } + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) { + /* Tell LED3 to constant on */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + val &= ~(7<<6); + val |= (2<<6); /* A83B[8:6]= 2 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x20); + } else { + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x20); + } + } + break; + + case LED_MODE_OPER: + + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + + /* Set control reg */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + + if (!((val & + MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK) + >> MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT)) { + DP(NETIF_MSG_LINK, "Setting LINK_SIGNAL\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + 0xa492); + } + + /* Set LED masks */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x10); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x80); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x98); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, + 0x40); + + } else { + /* EXTPHY2 LED mode indicate that the 100M/1G/10G LED + * sources are all wired through LED1, rather than only + * 10G in other modes. + */ + val = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? 0x98 : 0x80; + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + val); + + /* Tell LED3 to blink on source */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + val &= ~(7<<6); + val |= (1<<6); /* A83B[8:6]= 1 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) { + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x18); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x06); + } + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) { + /* Restore LED4 source to external link, + * and re-enable interrupts. + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x40); + if (params->link_flags & + LINK_FLAGS_INT_DISABLED) { + bnx2x_link_int_enable(params); + params->link_flags &= + ~LINK_FLAGS_INT_DISABLED; + } + } + } + break; + } + + /* This is a workaround for E3+84833 until autoneg + * restart is fixed in f/w + */ + if (CHIP_IS_E3(bp)) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, &val); + } +} + +/******************************************************************/ +/* 54618SE PHY SECTION */ +/******************************************************************/ +static void bnx2x_54618se_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + u16 temp; + switch (action) { + case PHY_INIT: + /* Configure LED4: set to INTR (0x6). */ + /* Accessing shadow register 0xe. */ + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL2); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp &= ~(0xf << 4); + temp |= (0x6 << 4); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + /* Configure INTR based on link status change. */ + bnx2x_cl22_write(bp, phy, + MDIO_REG_INTR_MASK, + ~MDIO_REG_INTR_MASK_LINK_STATUS); + break; + } +} + +static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port; + u16 autoneg_val, an_1000_val, an_10_100_val, fc_val, temp; + u32 cfg_pin; + + DP(NETIF_MSG_LINK, "54618SE cfg init\n"); + usleep_range(1000, 2000); + + /* This works with E3 only, no need to check the chip + * before determining the port. + */ + port = params->port; + + cfg_pin = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + + /* Drive pin high to bring the GPHY out of reset. */ + bnx2x_set_cfg_pin(bp, cfg_pin, 1); + + /* wait for GPHY to reset */ + msleep(50); + + /* reset phy */ + bnx2x_cl22_write(bp, phy, + MDIO_PMA_REG_CTRL, 0x8000); + bnx2x_wait_reset_complete(bp, phy, params); + + /* Wait for GPHY to reset */ + msleep(50); + + + bnx2x_54618se_specific_func(phy, params, PHY_INIT); + /* Flip the signal detect polarity (set 0x1c.0x1e[8]). */ + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_AUTO_DET_MED); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD; + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + + /* Set up fc */ + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + fc_val = 0; + if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) + fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; + + if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + + /* Read all advertisement */ + bnx2x_cl22_read(bp, phy, + 0x09, + &an_1000_val); + + bnx2x_cl22_read(bp, phy, + 0x04, + &an_10_100_val); + + bnx2x_cl22_read(bp, phy, + MDIO_PMA_REG_CTRL, + &autoneg_val); + + /* Disable forced speed */ + autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); + an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8) | (1<<10) | + (1<<11)); + + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == SPEED_1000)) { + an_1000_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + if (phy->req_duplex == DUPLEX_FULL) + an_1000_val |= (1<<9); + DP(NETIF_MSG_LINK, "Advertising 1G\n"); + } else + an_1000_val &= ~((1<<8) | (1<<9)); + + bnx2x_cl22_write(bp, phy, + 0x09, + an_1000_val); + bnx2x_cl22_read(bp, phy, + 0x09, + &an_1000_val); + + /* Advertise 10/100 link speed */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) { + an_10_100_val |= (1<<6); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + an_10_100_val |= (1<<7); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + an_10_100_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } + } + + /* Only 10/100 are allowed to work in FORCE mode */ + if (phy->req_line_speed == SPEED_100) { + autoneg_val |= (1<<13); + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl22_write(bp, phy, + 0x18, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 100M force\n"); + } + if (phy->req_line_speed == SPEED_10) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl22_write(bp, phy, + 0x18, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 10M force\n"); + } + + if ((phy->flags & FLAGS_EEE) && bnx2x_eee_has_cap(params)) { + int rc; + + bnx2x_cl22_write(bp, phy, MDIO_REG_GPHY_EXP_ACCESS, + MDIO_REG_GPHY_EXP_ACCESS_TOP | + MDIO_REG_GPHY_EXP_TOP_2K_BUF); + bnx2x_cl22_read(bp, phy, MDIO_REG_GPHY_EXP_ACCESS_GATE, &temp); + temp &= 0xfffe; + bnx2x_cl22_write(bp, phy, MDIO_REG_GPHY_EXP_ACCESS_GATE, temp); + + rc = bnx2x_eee_initial_config(params, vars, SHMEM_EEE_1G_ADV); + if (rc) { + DP(NETIF_MSG_LINK, "Failed to configure EEE timers\n"); + bnx2x_eee_disable(phy, params, vars); + } else if ((params->eee_mode & EEE_MODE_ADV_LPI) && + (phy->req_duplex == DUPLEX_FULL) && + (bnx2x_eee_calc_timer(params) || + !(params->eee_mode & EEE_MODE_ENABLE_LPI))) { + /* Need to advertise EEE only when requested, + * and either no LPI assertion was requested, + * or it was requested and a valid timer was set. + * Also notice full duplex is required for EEE. + */ + bnx2x_eee_advertise(phy, params, vars, + SHMEM_EEE_1G_ADV); + } else { + DP(NETIF_MSG_LINK, "Don't Advertise 1GBase-T EEE\n"); + bnx2x_eee_disable(phy, params, vars); + } + } else { + vars->eee_status &= ~SHMEM_EEE_1G_ADV << + SHMEM_EEE_SUPPORTED_SHIFT; + + if (phy->flags & FLAGS_EEE) { + /* Handle legacy auto-grEEEn */ + if (params->feature_config_flags & + FEATURE_CONFIG_AUTOGREEEN_ENABLED) { + temp = 6; + DP(NETIF_MSG_LINK, "Enabling Auto-GrEEEn\n"); + } else { + temp = 0; + DP(NETIF_MSG_LINK, "Don't Adv. EEE\n"); + } + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_EEE_ADV, temp); + } + } + + bnx2x_cl22_write(bp, phy, + 0x04, + an_10_100_val | fc_val); + + if (phy->req_duplex == DUPLEX_FULL) + autoneg_val |= (1<<8); + + bnx2x_cl22_write(bp, phy, + MDIO_PMA_REG_CTRL, autoneg_val); + + return 0; +} + + +static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + u16 temp; + + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL1); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp &= 0xff00; + + DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode); + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + temp |= 0x00ee; + break; + case LED_MODE_OPER: + temp |= 0x0001; + break; + case LED_MODE_ON: + temp |= 0x00ff; + break; + default: + break; + } + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + return; +} + + +static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin; + u8 port; + + /* In case of no EPIO routed to reset the GPHY, put it + * in low power mode. + */ + bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800); + /* This works with E3 only, no need to check the chip + * before determining the port. + */ + port = params->port; + cfg_pin = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + + /* Drive pin low to put GPHY in reset. */ + bnx2x_set_cfg_pin(bp, cfg_pin, 0); +} + +static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val; + u8 link_up = 0; + u16 legacy_status, legacy_speed; + + /* Get speed operation status */ + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_AUX_STATUS, + &legacy_status); + DP(NETIF_MSG_LINK, "54618SE read_status: 0x%x\n", legacy_status); + + /* Read status to clear the PHY interrupt. */ + bnx2x_cl22_read(bp, phy, + MDIO_REG_INTR_STATUS, + &val); + + link_up = ((legacy_status & (1<<2)) == (1<<2)); + + if (link_up) { + legacy_speed = (legacy_status & (7<<8)); + if (legacy_speed == (7<<8)) { + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_FULL; + } else if (legacy_speed == (6<<8)) { + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_HALF; + } else if (legacy_speed == (5<<8)) { + vars->line_speed = SPEED_100; + vars->duplex = DUPLEX_FULL; + } + /* Omitting 100Base-T4 for now */ + else if (legacy_speed == (3<<8)) { + vars->line_speed = SPEED_100; + vars->duplex = DUPLEX_HALF; + } else if (legacy_speed == (2<<8)) { + vars->line_speed = SPEED_10; + vars->duplex = DUPLEX_FULL; + } else if (legacy_speed == (1<<8)) { + vars->line_speed = SPEED_10; + vars->duplex = DUPLEX_HALF; + } else /* Should not happen */ + vars->line_speed = 0; + + DP(NETIF_MSG_LINK, + "Link is up in %dMbps, is_duplex_full= %d\n", + vars->line_speed, + (vars->duplex == DUPLEX_FULL)); + + /* Check legacy speed AN resolution */ + bnx2x_cl22_read(bp, phy, + 0x01, + &val); + if (val & (1<<5)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + bnx2x_cl22_read(bp, phy, + 0x06, + &val); + if ((val & (1<<0)) == 0) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + + DP(NETIF_MSG_LINK, "BCM54618SE: link speed is %d\n", + vars->line_speed); + + bnx2x_ext_phy_resolve_fc(phy, params, vars); + + if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + /* Report LP advertised speeds */ + bnx2x_cl22_read(bp, phy, 0x5, &val); + + if (val & (1<<5)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10THD_CAPABLE; + if (val & (1<<6)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE; + if (val & (1<<7)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE; + if (val & (1<<8)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE; + if (val & (1<<9)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100T4_CAPABLE; + + bnx2x_cl22_read(bp, phy, 0xa, &val); + if (val & (1<<10)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE; + if (val & (1<<11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + + if ((phy->flags & FLAGS_EEE) && + bnx2x_eee_has_cap(params)) + bnx2x_eee_an_resolve(phy, params, vars); + } + } + return link_up; +} + +static void bnx2x_54618se_config_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val; + u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + + DP(NETIF_MSG_LINK, "2PMA/PMD ext_phy_loopback: 54618se\n"); + + /* Enable master/slave manual mmode and set to master */ + /* mii write 9 [bits set 11 12] */ + bnx2x_cl22_write(bp, phy, 0x09, 3<<11); + + /* forced 1G and disable autoneg */ + /* set val [mii read 0] */ + /* set val [expr $val & [bits clear 6 12 13]] */ + /* set val [expr $val | [bits set 6 8]] */ + /* mii write 0 $val */ + bnx2x_cl22_read(bp, phy, 0x00, &val); + val &= ~((1<<6) | (1<<12) | (1<<13)); + val |= (1<<6) | (1<<8); + bnx2x_cl22_write(bp, phy, 0x00, val); + + /* Set external loopback and Tx using 6dB coding */ + /* mii write 0x18 7 */ + /* set val [mii read 0x18] */ + /* mii write 0x18 [expr $val | [bits set 10 15]] */ + bnx2x_cl22_write(bp, phy, 0x18, 7); + bnx2x_cl22_read(bp, phy, 0x18, &val); + bnx2x_cl22_write(bp, phy, 0x18, val | (1<<10) | (1<<15)); + + /* This register opens the gate for the UMAC despite its name */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1); + + /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame + * length used by the MAC receive logic to check frames. + */ + REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710); +} + +/******************************************************************/ +/* SFX7101 PHY SECTION */ +/******************************************************************/ +static void bnx2x_7101_config_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + /* SFX7101_XGXS_TEST1 */ + bnx2x_cl45_write(bp, phy, + MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100); +} + +static int bnx2x_7101_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u16 fw_ver1, fw_ver2, val; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting the SFX7101 LASI indication\n"); + + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_wait_reset_complete(bp, phy, params); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1); + DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1<<3)); + + bnx2x_ext_phy_set_pause(params, phy, vars); + /* Restart autoneg */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val); + val |= 0x200; + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val); + + /* Save spirom version */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER1, &fw_ver1); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2); + bnx2x_save_spirom_version(bp, params->port, + (u32)(fw_ver1<<16 | fw_ver2), phy->ver_addr); + return 0; +} + +static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 link_up; + u16 val1, val2; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n", + val2, val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + DP(NETIF_MSG_LINK, "10G-base-T PMA status 0x%x->0x%x\n", + val2, val1); + link_up = ((val1 & 4) == 4); + /* If link is up print the AN outcome of the SFX7101 PHY */ + if (link_up) { + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS, + &val2); + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n", + val2, (val2 & (1<<14))); + bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); + bnx2x_ext_phy_resolve_fc(phy, params, vars); + + /* Read LP advertised speeds */ + if (val2 & (1<<11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + } + return link_up; +} + +static int bnx2x_7101_format_ver(u32 spirom_ver, u8 *str, u16 *len) +{ + if (*len < 5) + return -EINVAL; + str[0] = (spirom_ver & 0xFF); + str[1] = (spirom_ver & 0xFF00) >> 8; + str[2] = (spirom_ver & 0xFF0000) >> 16; + str[3] = (spirom_ver & 0xFF000000) >> 24; + str[4] = '\0'; + *len -= 5; + return 0; +} + +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy) +{ + u16 val, cnt; + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7101_RESET, &val); + + for (cnt = 0; cnt < 10; cnt++) { + msleep(50); + /* Writes a self-clearing reset */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7101_RESET, + (val | (1<<15))); + /* Wait for clear */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7101_RESET, &val); + + if ((val & (1<<15)) == 0) + break; + } +} + +static void bnx2x_7101_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) { + /* Low power mode is controlled by GPIO 2 */ + bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); + /* The PHY reset is controlled by GPIO 1 */ + bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); +} + +static void bnx2x_7101_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + u16 val = 0; + struct bnx2x *bp = params->bp; + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + val = 2; + break; + case LED_MODE_ON: + val = 1; + break; + case LED_MODE_OPER: + val = 0; + break; + } + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7107_LINK_LED_CNTL, + val); +} + +/******************************************************************/ +/* STATIC PHY DECLARATION */ +/******************************************************************/ + +static const struct bnx2x_phy phy_null = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN, + .addr = 0, + .def_md_devad = 0, + .flags = FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = 0, + .media_type = ETH_PHY_NOT_PRESENT, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)NULL, + .read_status = (read_status_t)NULL, + .link_reset = (link_reset_t)NULL, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; + +static const struct bnx2x_phy phy_serdes = { + .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = 0, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_xgxs_config_init, + .read_status = (read_status_t)bnx2x_link_settings_status, + .link_reset = (link_reset_t)bnx2x_int_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; + +static const struct bnx2x_phy phy_xgxs = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = 0, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_CX4, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_xgxs_config_init, + .read_status = (read_status_t)bnx2x_link_settings_status, + .link_reset = (link_reset_t)bnx2x_int_link_reset, + .config_loopback = (config_loopback_t)bnx2x_set_xgxs_loopback, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func +}; +static const struct bnx2x_phy phy_warpcore = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_TX_ERROR_CHECK, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_10000baseKR_Full | + SUPPORTED_20000baseKR2_Full | + SUPPORTED_20000baseMLD2_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_UNSPECIFIED, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + /* req_duplex = */0, + /* rsrv = */0, + .config_init = (config_init_t)bnx2x_warpcore_config_init, + .read_status = (read_status_t)bnx2x_warpcore_read_status, + .link_reset = (link_reset_t)bnx2x_warpcore_link_reset, + .config_loopback = (config_loopback_t)bnx2x_set_warpcore_loopback, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)bnx2x_warpcore_hw_reset, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; + + +static const struct bnx2x_phy phy_7101 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_FAN_FAILURE_DET_REQ, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_7101_config_init, + .read_status = (read_status_t)bnx2x_7101_read_status, + .link_reset = (link_reset_t)bnx2x_common_ext_link_reset, + .config_loopback = (config_loopback_t)bnx2x_7101_config_loopback, + .format_fw_ver = (format_fw_ver_t)bnx2x_7101_format_ver, + .hw_reset = (hw_reset_t)bnx2x_7101_hw_reset, + .set_link_led = (set_link_led_t)bnx2x_7101_set_link_led, + .phy_specific_func = (phy_specific_func_t)NULL +}; +static const struct bnx2x_phy phy_8073 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + .addr = 0xff, + .def_md_devad = 0, + .flags = 0, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_KR, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_8073_config_init, + .read_status = (read_status_t)bnx2x_8073_read_status, + .link_reset = (link_reset_t)bnx2x_8073_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)bnx2x_8073_specific_func +}; +static const struct bnx2x_phy phy_8705 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_XFP_FIBER, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_8705_config_init, + .read_status = (read_status_t)bnx2x_8705_read_status, + .link_reset = (link_reset_t)bnx2x_common_ext_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_null_format_ver, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; +static const struct bnx2x_phy phy_8706 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_SFPP_10G_FIBER, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_8706_config_init, + .read_status = (read_status_t)bnx2x_8706_read_status, + .link_reset = (link_reset_t)bnx2x_common_ext_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; + +static const struct bnx2x_phy phy_8726 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, + .addr = 0xff, + .def_md_devad = 0, + .flags = (FLAGS_INIT_XGXS_FIRST | + FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_NOT_PRESENT, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_8726_config_init, + .read_status = (read_status_t)bnx2x_8726_read_status, + .link_reset = (link_reset_t)bnx2x_8726_link_reset, + .config_loopback = (config_loopback_t)bnx2x_8726_config_loopback, + .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; + +static const struct bnx2x_phy phy_8727 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + .addr = 0xff, + .def_md_devad = 0, + .flags = (FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_NOT_PRESENT, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_8727_config_init, + .read_status = (read_status_t)bnx2x_8727_read_status, + .link_reset = (link_reset_t)bnx2x_8727_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_format_ver, + .hw_reset = (hw_reset_t)bnx2x_8727_hw_reset, + .set_link_led = (set_link_led_t)bnx2x_8727_set_link_led, + .phy_specific_func = (phy_specific_func_t)bnx2x_8727_specific_func +}; +static const struct bnx2x_phy phy_8481 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_REARM_LATCH_SIGNAL, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_8481_config_init, + .read_status = (read_status_t)bnx2x_848xx_read_status, + .link_reset = (link_reset_t)bnx2x_8481_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, + .hw_reset = (hw_reset_t)bnx2x_8481_hw_reset, + .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t)NULL +}; + +static const struct bnx2x_phy phy_84823 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823, + .addr = 0xff, + .def_md_devad = 0, + .flags = (FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_REARM_LATCH_SIGNAL | + FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_848x3_config_init, + .read_status = (read_status_t)bnx2x_848xx_read_status, + .link_reset = (link_reset_t)bnx2x_848x3_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func +}; + +static const struct bnx2x_phy phy_84833 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833, + .addr = 0xff, + .def_md_devad = 0, + .flags = (FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_REARM_LATCH_SIGNAL | + FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_848x3_config_init, + .read_status = (read_status_t)bnx2x_848xx_read_status, + .link_reset = (link_reset_t)bnx2x_848x3_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, + .hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy, + .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func +}; + +static const struct bnx2x_phy phy_84834 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_REARM_LATCH_SIGNAL, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_848x3_config_init, + .read_status = (read_status_t)bnx2x_848xx_read_status, + .link_reset = (link_reset_t)bnx2x_848x3_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, + .hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy, + .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func +}; + +static const struct bnx2x_phy phy_84858 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_REARM_LATCH_SIGNAL, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t)bnx2x_848x3_config_init, + .read_status = (read_status_t)bnx2x_848xx_read_status, + .link_reset = (link_reset_t)bnx2x_848x3_link_reset, + .config_loopback = (config_loopback_t)NULL, + .format_fw_ver = (format_fw_ver_t)bnx2x_8485x_format_ver, + .hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy, + .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func +}; + +static const struct bnx2x_phy phy_54618se = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + /* req_duplex = */0, + /* rsrv = */0, + .config_init = (config_init_t)bnx2x_54618se_config_init, + .read_status = (read_status_t)bnx2x_54618se_read_status, + .link_reset = (link_reset_t)bnx2x_54618se_link_reset, + .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)bnx2x_5461x_set_link_led, + .phy_specific_func = (phy_specific_func_t)bnx2x_54618se_specific_func +}; +/*****************************************************************/ +/* */ +/* Populate the phy according. Main function: bnx2x_populate_phy */ +/* */ +/*****************************************************************/ + +static void bnx2x_populate_preemphasis(struct bnx2x *bp, u32 shmem_base, + struct bnx2x_phy *phy, u8 port, + u8 phy_index) +{ + /* Get the 4 lanes xgxs config rx and tx */ + u32 rx = 0, tx = 0, i; + for (i = 0; i < 2; i++) { + /* INT_PHY and EXT_PHY1 share the same value location in + * the shmem. When num_phys is greater than 1, than this value + * applies only to EXT_PHY1 + */ + if (phy_index == INT_PHY || phy_index == EXT_PHY1) { + rx = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].xgxs_config_rx[i<<1])); + + tx = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].xgxs_config_tx[i<<1])); + } else { + rx = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].xgxs_config2_rx[i<<1])); + + tx = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].xgxs_config2_rx[i<<1])); + } + + phy->rx_preemphasis[i << 1] = ((rx>>16) & 0xffff); + phy->rx_preemphasis[(i << 1) + 1] = (rx & 0xffff); + + phy->tx_preemphasis[i << 1] = ((tx>>16) & 0xffff); + phy->tx_preemphasis[(i << 1) + 1] = (tx & 0xffff); + } +} + +static u32 bnx2x_get_ext_phy_config(struct bnx2x *bp, u32 shmem_base, + u8 phy_index, u8 port) +{ + u32 ext_phy_config = 0; + switch (phy_index) { + case EXT_PHY1: + ext_phy_config = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].external_phy_config)); + break; + case EXT_PHY2: + ext_phy_config = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].external_phy_config2)); + break; + default: + DP(NETIF_MSG_LINK, "Invalid phy_index %d\n", phy_index); + return -EINVAL; + } + + return ext_phy_config; +} +static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, + struct bnx2x_phy *phy) +{ + u32 phy_addr; + u32 chip_id; + u32 switch_cfg = (REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config[port].link_config)) & + PORT_FEATURE_CONNECTED_SWITCH_MASK); + chip_id = (REG_RD(bp, MISC_REG_CHIP_NUM) << 16) | + ((REG_RD(bp, MISC_REG_CHIP_REV) & 0xf) << 12); + + DP(NETIF_MSG_LINK, ":chip_id = 0x%x\n", chip_id); + if (USES_WARPCORE(bp)) { + u32 serdes_net_if; + phy_addr = REG_RD(bp, + MISC_REG_WC0_CTRL_PHY_ADDR); + *phy = phy_warpcore; + if (REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR) == 0x3) + phy->flags |= FLAGS_4_PORT_MODE; + else + phy->flags &= ~FLAGS_4_PORT_MODE; + /* Check Dual mode */ + serdes_net_if = (REG_RD(bp, shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[port].default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + /* Set the appropriate supported and flags indications per + * interface type of the chip + */ + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_SGMII: + phy->supported &= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phy->media_type = ETH_PHY_BASE_T; + break; + case PORT_HW_CFG_NET_SERDES_IF_XFI: + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phy->media_type = ETH_PHY_XFP_FIBER; + break; + case PORT_HW_CFG_NET_SERDES_IF_SFI: + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phy->media_type = ETH_PHY_SFPP_10G_FIBER; + break; + case PORT_HW_CFG_NET_SERDES_IF_KR: + phy->media_type = ETH_PHY_KR; + phy->supported &= (SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseKR_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_NET_SERDES_IF_DXGXS: + phy->media_type = ETH_PHY_KR; + phy->flags |= FLAGS_WC_DUAL_MODE; + phy->supported &= (SUPPORTED_20000baseMLD2_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_NET_SERDES_IF_KR2: + phy->media_type = ETH_PHY_KR; + phy->flags |= FLAGS_WC_DUAL_MODE; + phy->supported &= (SUPPORTED_20000baseKR2_Full | + SUPPORTED_10000baseKR_Full | + SUPPORTED_1000baseKX_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phy->flags &= ~FLAGS_TX_ERROR_CHECK; + break; + default: + DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n", + serdes_net_if); + break; + } + + /* Enable MDC/MDIO work-around for E3 A0 since free running MDC + * was not set as expected. For B0, ECO will be enabled so there + * won't be an issue there + */ + if (CHIP_REV(bp) == CHIP_REV_Ax) + phy->flags |= FLAGS_MDC_MDIO_WA; + else + phy->flags |= FLAGS_MDC_MDIO_WA_B0; + } else { + switch (switch_cfg) { + case SWITCH_CFG_1G: + phy_addr = REG_RD(bp, + NIG_REG_SERDES0_CTRL_PHY_ADDR + + port * 0x10); + *phy = phy_serdes; + break; + case SWITCH_CFG_10G: + phy_addr = REG_RD(bp, + NIG_REG_XGXS0_CTRL_PHY_ADDR + + port * 0x18); + *phy = phy_xgxs; + break; + default: + DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); + return -EINVAL; + } + } + phy->addr = (u8)phy_addr; + phy->mdio_ctrl = bnx2x_get_emac_base(bp, + SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH, + port); + if (CHIP_IS_E2(bp)) + phy->def_md_devad = E2_DEFAULT_PHY_DEV_ADDR; + else + phy->def_md_devad = DEFAULT_PHY_DEV_ADDR; + + DP(NETIF_MSG_LINK, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x\n", + port, phy->addr, phy->mdio_ctrl); + + bnx2x_populate_preemphasis(bp, shmem_base, phy, port, INT_PHY); + return 0; +} + +static int bnx2x_populate_ext_phy(struct bnx2x *bp, + u8 phy_index, + u32 shmem_base, + u32 shmem2_base, + u8 port, + struct bnx2x_phy *phy) +{ + u32 ext_phy_config, phy_type, config2; + u32 mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH; + ext_phy_config = bnx2x_get_ext_phy_config(bp, shmem_base, + phy_index, port); + phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); + /* Select the phy type */ + switch (phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED; + *phy = phy_8073; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + *phy = phy_8705; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: + *phy = phy_8706; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; + *phy = phy_8726; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: + /* BCM8727_NOC => BCM8727 no over current */ + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; + *phy = phy_8727; + phy->flags |= FLAGS_NOC; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; + *phy = phy_8727; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: + *phy = phy_8481; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: + *phy = phy_84823; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: + *phy = phy_84833; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834: + *phy = phy_84834; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858: + *phy = phy_84858; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE: + *phy = phy_54618se; + if (phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + phy->flags |= FLAGS_EEE; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + *phy = phy_7101; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: + *phy = phy_null; + return -EINVAL; + default: + *phy = phy_null; + /* In case external PHY wasn't found */ + if ((phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) + return -EINVAL; + return 0; + } + + phy->addr = XGXS_EXT_PHY_ADDR(ext_phy_config); + bnx2x_populate_preemphasis(bp, shmem_base, phy, port, phy_index); + + /* The shmem address of the phy version is located on different + * structures. In case this structure is too old, do not set + * the address + */ + config2 = REG_RD(bp, shmem_base + offsetof(struct shmem_region, + dev_info.shared_hw_config.config2)); + if (phy_index == EXT_PHY1) { + phy->ver_addr = shmem_base + offsetof(struct shmem_region, + port_mb[port].ext_phy_fw_version); + + /* Check specific mdc mdio settings */ + if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK) + mdc_mdio_access = config2 & + SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK; + } else { + u32 size = REG_RD(bp, shmem2_base); + + if (size > + offsetof(struct shmem2_region, ext_phy_fw_version2)) { + phy->ver_addr = shmem2_base + + offsetof(struct shmem2_region, + ext_phy_fw_version2[port]); + } + /* Check specific mdc mdio settings */ + if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) + mdc_mdio_access = (config2 & + SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) >> + (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT - + SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT); + } + phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port); + + if (bnx2x_is_8483x_8485x(phy) && (phy->ver_addr)) { + /* Remove 100Mb link supported for BCM84833/4 when phy fw + * version lower than or equal to 1.39 + */ + u32 raw_ver = REG_RD(bp, phy->ver_addr); + if (((raw_ver & 0x7F) <= 39) && + (((raw_ver & 0xF80) >> 7) <= 1)) + phy->supported &= ~(SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); + } + + DP(NETIF_MSG_LINK, "phy_type 0x%x port %d found in index %d\n", + phy_type, port, phy_index); + DP(NETIF_MSG_LINK, " addr=0x%x, mdio_ctl=0x%x\n", + phy->addr, phy->mdio_ctrl); + return 0; +} + +static int bnx2x_populate_phy(struct bnx2x *bp, u8 phy_index, u32 shmem_base, + u32 shmem2_base, u8 port, struct bnx2x_phy *phy) +{ + phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN; + if (phy_index == INT_PHY) + return bnx2x_populate_int_phy(bp, shmem_base, port, phy); + + return bnx2x_populate_ext_phy(bp, phy_index, shmem_base, shmem2_base, + port, phy); +} + +static void bnx2x_phy_def_cfg(struct link_params *params, + struct bnx2x_phy *phy, + u8 phy_index) +{ + struct bnx2x *bp = params->bp; + u32 link_config; + /* Populate the default phy configuration for MF mode */ + if (phy_index == EXT_PHY2) { + link_config = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port].link_config2)); + phy->speed_cap_mask = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info. + port_hw_config[params->port].speed_capability_mask2)); + } else { + link_config = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port].link_config)); + phy->speed_cap_mask = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info. + port_hw_config[params->port].speed_capability_mask)); + } + DP(NETIF_MSG_LINK, + "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x\n", + phy_index, link_config, phy->speed_cap_mask); + + phy->req_duplex = DUPLEX_FULL; + switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { + case PORT_FEATURE_LINK_SPEED_10M_HALF: + phy->req_duplex = DUPLEX_HALF; + /* fall through */ + case PORT_FEATURE_LINK_SPEED_10M_FULL: + phy->req_line_speed = SPEED_10; + break; + case PORT_FEATURE_LINK_SPEED_100M_HALF: + phy->req_duplex = DUPLEX_HALF; + /* fall through */ + case PORT_FEATURE_LINK_SPEED_100M_FULL: + phy->req_line_speed = SPEED_100; + break; + case PORT_FEATURE_LINK_SPEED_1G: + phy->req_line_speed = SPEED_1000; + break; + case PORT_FEATURE_LINK_SPEED_2_5G: + phy->req_line_speed = SPEED_2500; + break; + case PORT_FEATURE_LINK_SPEED_10G_CX4: + phy->req_line_speed = SPEED_10000; + break; + default: + phy->req_line_speed = SPEED_AUTO_NEG; + break; + } + + switch (link_config & PORT_FEATURE_FLOW_CONTROL_MASK) { + case PORT_FEATURE_FLOW_CONTROL_AUTO: + phy->req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO; + break; + case PORT_FEATURE_FLOW_CONTROL_TX: + phy->req_flow_ctrl = BNX2X_FLOW_CTRL_TX; + break; + case PORT_FEATURE_FLOW_CONTROL_RX: + phy->req_flow_ctrl = BNX2X_FLOW_CTRL_RX; + break; + case PORT_FEATURE_FLOW_CONTROL_BOTH: + phy->req_flow_ctrl = BNX2X_FLOW_CTRL_BOTH; + break; + default: + phy->req_flow_ctrl = BNX2X_FLOW_CTRL_NONE; + break; + } +} + +u32 bnx2x_phy_selection(struct link_params *params) +{ + u32 phy_config_swapped, prio_cfg; + u32 return_cfg = PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT; + + phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + + prio_cfg = params->multi_phy_config & + PORT_HW_CFG_PHY_SELECTION_MASK; + + if (phy_config_swapped) { + switch (prio_cfg) { + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: + return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY; + break; + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: + return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY; + break; + } + } else + return_cfg = prio_cfg; + + return return_cfg; +} + +int bnx2x_phy_probe(struct link_params *params) +{ + u8 phy_index, actual_phy_idx; + u32 phy_config_swapped, sync_offset, media_types; + struct bnx2x *bp = params->bp; + struct bnx2x_phy *phy; + params->num_phys = 0; + DP(NETIF_MSG_LINK, "Begin phy probe\n"); + phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + + for (phy_index = INT_PHY; phy_index < MAX_PHYS; + phy_index++) { + actual_phy_idx = phy_index; + if (phy_config_swapped) { + if (phy_index == EXT_PHY1) + actual_phy_idx = EXT_PHY2; + else if (phy_index == EXT_PHY2) + actual_phy_idx = EXT_PHY1; + } + DP(NETIF_MSG_LINK, "phy_config_swapped %x, phy_index %x," + " actual_phy_idx %x\n", phy_config_swapped, + phy_index, actual_phy_idx); + phy = ¶ms->phy[actual_phy_idx]; + if (bnx2x_populate_phy(bp, phy_index, params->shmem_base, + params->shmem2_base, params->port, + phy) != 0) { + params->num_phys = 0; + DP(NETIF_MSG_LINK, "phy probe failed in phy index %d\n", + phy_index); + for (phy_index = INT_PHY; + phy_index < MAX_PHYS; + phy_index++) + *phy = phy_null; + return -EINVAL; + } + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) + break; + + if (params->feature_config_flags & + FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET) + phy->flags &= ~FLAGS_TX_ERROR_CHECK; + + if (!(params->feature_config_flags & + FEATURE_CONFIG_MT_SUPPORT)) + phy->flags |= FLAGS_MDC_MDIO_WA_G; + + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].media_type); + media_types = REG_RD(bp, sync_offset); + + /* Update media type for non-PMF sync only for the first time + * In case the media type changes afterwards, it will be updated + * using the update_status function + */ + if ((media_types & (PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + actual_phy_idx))) == 0) { + media_types |= ((phy->media_type & + PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + actual_phy_idx)); + } + REG_WR(bp, sync_offset, media_types); + + bnx2x_phy_def_cfg(params, phy, phy_index); + params->num_phys++; + } + + DP(NETIF_MSG_LINK, "End phy probe. #phys found %x\n", params->num_phys); + return 0; +} + +static void bnx2x_init_bmac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 1; + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_BMAC; + + vars->phy_flags = PHY_XGXS_FLAG; + + bnx2x_xgxs_deassert(params); + + /* Set bmac loopback */ + bnx2x_bmac_enable(params, vars, 1, 1); + + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} + +static void bnx2x_init_emac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 1; + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_EMAC; + + vars->phy_flags = PHY_XGXS_FLAG; + + bnx2x_xgxs_deassert(params); + /* Set bmac loopback */ + bnx2x_emac_enable(params, vars, 1); + bnx2x_emac_program(params, vars); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} + +static void bnx2x_init_xmac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 1; + if (!params->req_line_speed[0]) + vars->line_speed = SPEED_10000; + else + vars->line_speed = params->req_line_speed[0]; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_XMAC; + vars->phy_flags = PHY_XGXS_FLAG; + /* Set WC to loopback mode since link is required to provide clock + * to the XMAC in 20G mode + */ + bnx2x_set_aer_mmd(params, ¶ms->phy[0]); + bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); + params->phy[INT_PHY].config_loopback( + ¶ms->phy[INT_PHY], + params); + + bnx2x_xmac_enable(params, vars, 1); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} + +static void bnx2x_init_umac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 1; + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_UMAC; + vars->phy_flags = PHY_XGXS_FLAG; + bnx2x_umac_enable(params, vars, 1); + + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} + +static void bnx2x_init_xgxs_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + struct bnx2x_phy *int_phy = ¶ms->phy[INT_PHY]; + vars->link_up = 1; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->duplex = DUPLEX_FULL; + if (params->req_line_speed[0] == SPEED_1000) + vars->line_speed = SPEED_1000; + else if ((params->req_line_speed[0] == SPEED_20000) || + (int_phy->flags & FLAGS_WC_DUAL_MODE)) + vars->line_speed = SPEED_20000; + else + vars->line_speed = SPEED_10000; + + if (!USES_WARPCORE(bp)) + bnx2x_xgxs_deassert(params); + bnx2x_link_initialize(params, vars); + + if (params->req_line_speed[0] == SPEED_1000) { + if (USES_WARPCORE(bp)) + bnx2x_umac_enable(params, vars, 0); + else { + bnx2x_emac_program(params, vars); + bnx2x_emac_enable(params, vars, 0); + } + } else { + if (USES_WARPCORE(bp)) + bnx2x_xmac_enable(params, vars, 0); + else + bnx2x_bmac_enable(params, vars, 0, 1); + } + + if (params->loopback_mode == LOOPBACK_XGXS) { + /* Set 10G XGXS loopback */ + int_phy->config_loopback(int_phy, params); + } else { + /* Set external phy loopback */ + u8 phy_index; + for (phy_index = EXT_PHY1; + phy_index < params->num_phys; phy_index++) + if (params->phy[phy_index].config_loopback) + params->phy[phy_index].config_loopback( + ¶ms->phy[phy_index], + params); + } + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + + bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed); +} + +void bnx2x_set_rx_filter(struct link_params *params, u8 en) +{ + struct bnx2x *bp = params->bp; + u8 val = en * 0x1F; + + /* Open / close the gate between the NIG and the BRB */ + if (!CHIP_IS_E1x(bp)) + val |= en * 0x20; + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + params->port*4, val); + + if (!CHIP_IS_E1(bp)) { + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + params->port*4, + en*0x3); + } + + REG_WR(bp, (params->port ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), en); +} +static int bnx2x_avoid_link_flap(struct link_params *params, + struct link_vars *vars) +{ + u32 phy_idx; + u32 dont_clear_stat, lfa_sts; + struct bnx2x *bp = params->bp; + + bnx2x_set_mdio_emac_per_phy(bp, params); + /* Sync the link parameters */ + bnx2x_link_status_update(params, vars); + + /* + * The module verification was already done by previous link owner, + * so this call is meant only to get warning message + */ + + for (phy_idx = INT_PHY; phy_idx < params->num_phys; phy_idx++) { + struct bnx2x_phy *phy = ¶ms->phy[phy_idx]; + if (phy->phy_specific_func) { + DP(NETIF_MSG_LINK, "Calling PHY specific func\n"); + phy->phy_specific_func(phy, params, PHY_INIT); + } + if ((phy->media_type == ETH_PHY_SFPP_10G_FIBER) || + (phy->media_type == ETH_PHY_SFP_1G_FIBER) || + (phy->media_type == ETH_PHY_DA_TWINAX)) + bnx2x_verify_sfp_module(phy, params); + } + lfa_sts = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, + lfa_sts)); + + dont_clear_stat = lfa_sts & SHMEM_LFA_DONT_CLEAR_STAT; + + /* Re-enable the NIG/MAC */ + if (CHIP_IS_E3(bp)) { + if (!dont_clear_stat) { + REG_WR(bp, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_MSTAT0 << + params->port)); + REG_WR(bp, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_MSTAT0 << + params->port)); + } + if (vars->line_speed < SPEED_10000) + bnx2x_umac_enable(params, vars, 0); + else + bnx2x_xmac_enable(params, vars, 0); + } else { + if (vars->line_speed < SPEED_10000) + bnx2x_emac_enable(params, vars, 0); + else + bnx2x_bmac_enable(params, vars, 0, !dont_clear_stat); + } + + /* Increment LFA count */ + lfa_sts = ((lfa_sts & ~LINK_FLAP_AVOIDANCE_COUNT_MASK) | + (((((lfa_sts & LINK_FLAP_AVOIDANCE_COUNT_MASK) >> + LINK_FLAP_AVOIDANCE_COUNT_OFFSET) + 1) & 0xff) + << LINK_FLAP_AVOIDANCE_COUNT_OFFSET)); + /* Clear link flap reason */ + lfa_sts &= ~LFA_LINK_FLAP_REASON_MASK; + + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts), lfa_sts); + + /* Disable NIG DRAIN */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + + /* Enable interrupts */ + bnx2x_link_int_enable(params); + return 0; +} + +static void bnx2x_cannot_avoid_link_flap(struct link_params *params, + struct link_vars *vars, + int lfa_status) +{ + u32 lfa_sts, cfg_idx, tmp_val; + struct bnx2x *bp = params->bp; + + bnx2x_link_reset(params, vars, 1); + + if (!params->lfa_base) + return; + /* Store the new link parameters */ + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, req_duplex), + params->req_duplex[0] | (params->req_duplex[1] << 16)); + + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, req_flow_ctrl), + params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16)); + + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, req_line_speed), + params->req_line_speed[0] | (params->req_line_speed[1] << 16)); + + for (cfg_idx = 0; cfg_idx < SHMEM_LINK_CONFIG_SIZE; cfg_idx++) { + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, + speed_cap_mask[cfg_idx]), + params->speed_cap_mask[cfg_idx]); + } + + tmp_val = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, additional_config)); + tmp_val &= ~REQ_FC_AUTO_ADV_MASK; + tmp_val |= params->req_fc_auto_adv; + + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, additional_config), tmp_val); + + lfa_sts = REG_RD(bp, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts)); + + /* Clear the "Don't Clear Statistics" bit, and set reason */ + lfa_sts &= ~SHMEM_LFA_DONT_CLEAR_STAT; + + /* Set link flap reason */ + lfa_sts &= ~LFA_LINK_FLAP_REASON_MASK; + lfa_sts |= ((lfa_status & LFA_LINK_FLAP_REASON_MASK) << + LFA_LINK_FLAP_REASON_OFFSET); + + /* Increment link flap counter */ + lfa_sts = ((lfa_sts & ~LINK_FLAP_COUNT_MASK) | + (((((lfa_sts & LINK_FLAP_COUNT_MASK) >> + LINK_FLAP_COUNT_OFFSET) + 1) & 0xff) + << LINK_FLAP_COUNT_OFFSET)); + REG_WR(bp, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts), lfa_sts); + /* Proceed with regular link initialization */ +} + +int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) +{ + int lfa_status; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Phy Initialization started\n"); + DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n", + params->req_line_speed[0], params->req_flow_ctrl[0]); + DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n", + params->req_line_speed[1], params->req_flow_ctrl[1]); + DP(NETIF_MSG_LINK, "req_adv_flow_ctrl 0x%x\n", params->req_fc_auto_adv); + vars->link_status = 0; + vars->phy_link_up = 0; + vars->link_up = 0; + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_NONE; + vars->phy_flags = 0; + vars->check_kr2_recovery_cnt = 0; + params->link_flags = PHY_INITIALIZED; + /* Driver opens NIG-BRB filters */ + bnx2x_set_rx_filter(params, 1); + bnx2x_chng_link_count(params, true); + /* Check if link flap can be avoided */ + lfa_status = bnx2x_check_lfa(params); + + if (lfa_status == 0) { + DP(NETIF_MSG_LINK, "Link Flap Avoidance in progress\n"); + return bnx2x_avoid_link_flap(params, vars); + } + + DP(NETIF_MSG_LINK, "Cannot avoid link flap lfa_sta=0x%x\n", + lfa_status); + bnx2x_cannot_avoid_link_flap(params, vars, lfa_status); + + /* Disable attentions */ + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + bnx2x_emac_init(params, vars); + + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + + if (params->num_phys == 0) { + DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); + return -EINVAL; + } + set_phy_vars(params, vars); + + DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); + switch (params->loopback_mode) { + case LOOPBACK_BMAC: + bnx2x_init_bmac_loopback(params, vars); + break; + case LOOPBACK_EMAC: + bnx2x_init_emac_loopback(params, vars); + break; + case LOOPBACK_XMAC: + bnx2x_init_xmac_loopback(params, vars); + break; + case LOOPBACK_UMAC: + bnx2x_init_umac_loopback(params, vars); + break; + case LOOPBACK_XGXS: + case LOOPBACK_EXT_PHY: + bnx2x_init_xgxs_loopback(params, vars); + break; + default: + if (!CHIP_IS_E3(bp)) { + if (params->switch_cfg == SWITCH_CFG_10G) + bnx2x_xgxs_deassert(params); + else + bnx2x_serdes_deassert(bp, params->port); + } + bnx2x_link_initialize(params, vars); + msleep(30); + bnx2x_link_int_enable(params); + break; + } + bnx2x_update_mng(params, vars->link_status); + + bnx2x_update_mng_eee(params, vars->eee_status); + return 0; +} + +int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy) +{ + struct bnx2x *bp = params->bp; + u8 phy_index, port = params->port, clear_latch_ind = 0; + DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port); + /* Disable attentions */ + vars->link_status = 0; + bnx2x_chng_link_count(params, true); + bnx2x_update_mng(params, vars->link_status); + vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK | + SHMEM_EEE_ACTIVE_BIT); + bnx2x_update_mng_eee(params, vars->eee_status); + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + /* Activate nig drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* Disable nig egress interface */ + if (!CHIP_IS_E3(bp)) { + REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + } + + if (!CHIP_IS_E3(bp)) { + bnx2x_set_bmac_rx(bp, params->chip_id, port, 0); + } else { + bnx2x_set_xmac_rxtx(params, 0); + bnx2x_set_umac_rxtx(params, 0); + } + /* Disable emac */ + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + usleep_range(10000, 20000); + /* The PHY reset is controlled by GPIO 1 + * Hold it as vars low + */ + /* Clear link led */ + bnx2x_set_mdio_emac_per_phy(bp, params); + bnx2x_set_led(params, vars, LED_MODE_OFF, 0); + + if (reset_ext_phy) { + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + if (params->phy[phy_index].link_reset) { + bnx2x_set_aer_mmd(params, + ¶ms->phy[phy_index]); + params->phy[phy_index].link_reset( + ¶ms->phy[phy_index], + params); + } + if (params->phy[phy_index].flags & + FLAGS_REARM_LATCH_SIGNAL) + clear_latch_ind = 1; + } + } + + if (clear_latch_ind) { + /* Clear latching indication */ + bnx2x_rearm_latch_signal(bp, port, 0); + bnx2x_bits_dis(bp, NIG_REG_LATCH_BC_0 + port*4, + 1 << NIG_LATCH_BC_ENABLE_MI_INT); + } + if (params->phy[INT_PHY].link_reset) + params->phy[INT_PHY].link_reset( + ¶ms->phy[INT_PHY], params); + + /* Disable nig ingress interface */ + if (!CHIP_IS_E3(bp)) { + /* Reset BigMac */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); + REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); + } else { + u32 xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + bnx2x_set_xumac_nig(params, 0, 0); + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC) + REG_WR(bp, xmac_base + XMAC_REG_CTRL, + XMAC_CTRL_REG_SOFT_RESET); + } + vars->link_up = 0; + vars->phy_flags = 0; + return 0; +} +int bnx2x_lfa_reset(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 0; + vars->phy_flags = 0; + params->link_flags &= ~PHY_INITIALIZED; + if (!params->lfa_base) + return bnx2x_link_reset(params, vars, 1); + /* + * Activate NIG drain so that during this time the device won't send + * anything while it is unable to response. + */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 1); + + /* + * Close gracefully the gate from BMAC to NIG such that no half packets + * are passed. + */ + if (!CHIP_IS_E3(bp)) + bnx2x_set_bmac_rx(bp, params->chip_id, params->port, 0); + + if (CHIP_IS_E3(bp)) { + bnx2x_set_xmac_rxtx(params, 0); + bnx2x_set_umac_rxtx(params, 0); + } + /* Wait 10ms for the pipe to clean up*/ + usleep_range(10000, 20000); + + /* Clean the NIG-BRB using the network filters in a way that will + * not cut a packet in the middle. + */ + bnx2x_set_rx_filter(params, 0); + + /* + * Re-open the gate between the BMAC and the NIG, after verifying the + * gate to the BRB is closed, otherwise packets may arrive to the + * firmware before driver had initialized it. The target is to achieve + * minimum management protocol down time. + */ + if (!CHIP_IS_E3(bp)) + bnx2x_set_bmac_rx(bp, params->chip_id, params->port, 1); + + if (CHIP_IS_E3(bp)) { + bnx2x_set_xmac_rxtx(params, 1); + bnx2x_set_umac_rxtx(params, 1); + } + /* Disable NIG drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + return 0; +} + +/****************************************************************************/ +/* Common function */ +/****************************************************************************/ +static int bnx2x_8073_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 chip_id) +{ + struct bnx2x_phy phy[PORT_MAX]; + struct bnx2x_phy *phy_blk[PORT_MAX]; + u16 val; + s8 port = 0; + s8 port_of_path = 0; + u32 swap_val, swap_override; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port ^= (swap_val && swap_override); + bnx2x_ext_phy_hw_reset(bp, port); + /* PART1 - Reset both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + u32 shmem_base, shmem2_base; + /* In E2, same phy is using for port0 of the two paths */ + if (CHIP_IS_E1x(bp)) { + shmem_base = shmem_base_path[0]; + shmem2_base = shmem2_base_path[0]; + port_of_path = port; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + port_of_path = 0; + } + + /* Extract the ext phy address for the port */ + if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, + port_of_path, &phy[port]) != + 0) { + DP(NETIF_MSG_LINK, "populate_phy failed\n"); + return -EINVAL; + } + /* Disable attentions */ + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + port_of_path*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + /* Need to take the phy out of low power mode in order + * to write to access its registers + */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, + port); + + /* Reset the phy */ + bnx2x_cl45_write(bp, &phy[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, + 1<<15); + } + + /* Add delay of 150ms after reset */ + msleep(150); + + if (phy[PORT_0].addr & 0x1) { + phy_blk[PORT_0] = &(phy[PORT_1]); + phy_blk[PORT_1] = &(phy[PORT_0]); + } else { + phy_blk[PORT_0] = &(phy[PORT_0]); + phy_blk[PORT_1] = &(phy[PORT_1]); + } + + /* PART2 - Download firmware to both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + if (CHIP_IS_E1x(bp)) + port_of_path = port; + else + port_of_path = 0; + + DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", + phy_blk[port]->addr); + if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], + port_of_path)) + return -EINVAL; + + /* Only set bit 10 = 1 (Tx power down) */ + bnx2x_cl45_read(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, &val); + + /* Phase1 of TX_POWER_DOWN reset */ + bnx2x_cl45_write(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, + (val | 1<<10)); + } + + /* Toggle Transmitter: Power down and then up with 600ms delay + * between + */ + msleep(600); + + /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + /* Phase2 of POWER_DOWN_RESET */ + /* Release bit 10 (Release Tx power down) */ + bnx2x_cl45_read(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, &val); + + bnx2x_cl45_write(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10)))); + usleep_range(15000, 30000); + + /* Read modify write the SPI-ROM version select register */ + bnx2x_cl45_read(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_EDC_FFE_MAIN, &val); + bnx2x_cl45_write(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12))); + + /* set GPIO2 back to LOW */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + } + return 0; +} +static int bnx2x_8726_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 chip_id) +{ + u32 val; + s8 port; + struct bnx2x_phy phy; + /* Use port1 because of the static port-swap */ + /* Enable the module detection interrupt */ + val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); + val |= ((1<<MISC_REGISTERS_GPIO_3)| + (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); + REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); + + bnx2x_ext_phy_hw_reset(bp, 0); + usleep_range(5000, 10000); + for (port = 0; port < PORT_MAX; port++) { + u32 shmem_base, shmem2_base; + + /* In E2, same phy is using for port0 of the two paths */ + if (CHIP_IS_E1x(bp)) { + shmem_base = shmem_base_path[0]; + shmem2_base = shmem2_base_path[0]; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + } + /* Extract the ext phy address for the port */ + if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, + port, &phy) != + 0) { + DP(NETIF_MSG_LINK, "populate phy failed\n"); + return -EINVAL; + } + + /* Reset phy*/ + bnx2x_cl45_write(bp, &phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); + + + /* Set fault module detected LED on */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_HIGH, + port); + } + + return 0; +} +static void bnx2x_get_ext_phy_reset_gpio(struct bnx2x *bp, u32 shmem_base, + u8 *io_gpio, u8 *io_port) +{ + + u32 phy_gpio_reset = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[PORT_0].default_cfg)); + switch (phy_gpio_reset) { + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0: + *io_gpio = 0; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0: + *io_gpio = 1; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0: + *io_gpio = 2; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0: + *io_gpio = 3; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1: + *io_gpio = 0; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1: + *io_gpio = 1; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1: + *io_gpio = 2; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1: + *io_gpio = 3; + *io_port = 1; + break; + default: + /* Don't override the io_gpio and io_port */ + break; + } +} + +static int bnx2x_8727_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 chip_id) +{ + s8 port, reset_gpio; + u32 swap_val, swap_override; + struct bnx2x_phy phy[PORT_MAX]; + struct bnx2x_phy *phy_blk[PORT_MAX]; + s8 port_of_path; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + + reset_gpio = MISC_REGISTERS_GPIO_1; + port = 1; + + /* Retrieve the reset gpio/port which control the reset. + * Default is GPIO1, PORT1 + */ + bnx2x_get_ext_phy_reset_gpio(bp, shmem_base_path[0], + (u8 *)&reset_gpio, (u8 *)&port); + + /* Calculate the port based on port swap */ + port ^= (swap_val && swap_override); + + /* Initiate PHY reset*/ + bnx2x_set_gpio(bp, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_LOW, + port); + usleep_range(1000, 2000); + bnx2x_set_gpio(bp, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_HIGH, + port); + + usleep_range(5000, 10000); + + /* PART1 - Reset both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + u32 shmem_base, shmem2_base; + + /* In E2, same phy is using for port0 of the two paths */ + if (CHIP_IS_E1x(bp)) { + shmem_base = shmem_base_path[0]; + shmem2_base = shmem2_base_path[0]; + port_of_path = port; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + port_of_path = 0; + } + + /* Extract the ext phy address for the port */ + if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, + port_of_path, &phy[port]) != + 0) { + DP(NETIF_MSG_LINK, "populate phy failed\n"); + return -EINVAL; + } + /* disable attentions */ + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + port_of_path*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + + /* Reset the phy */ + bnx2x_cl45_write(bp, &phy[port], + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); + } + + /* Add delay of 150ms after reset */ + msleep(150); + if (phy[PORT_0].addr & 0x1) { + phy_blk[PORT_0] = &(phy[PORT_1]); + phy_blk[PORT_1] = &(phy[PORT_0]); + } else { + phy_blk[PORT_0] = &(phy[PORT_0]); + phy_blk[PORT_1] = &(phy[PORT_1]); + } + /* PART2 - Download firmware to both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + if (CHIP_IS_E1x(bp)) + port_of_path = port; + else + port_of_path = 0; + DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", + phy_blk[port]->addr); + if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], + port_of_path)) + return -EINVAL; + /* Disable PHY transmitter output */ + bnx2x_cl45_write(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_DISABLE, 1); + + } + return 0; +} + +static int bnx2x_84833_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], + u8 phy_index, + u32 chip_id) +{ + u8 reset_gpios; + reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, chip_id); + bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); + udelay(10); + bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_HIGH); + DP(NETIF_MSG_LINK, "84833 reset pulse on pin values 0x%x\n", + reset_gpios); + return 0; +} + +static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 ext_phy_type, u32 chip_id) +{ + int rc = 0; + + switch (ext_phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: + rc = bnx2x_8073_common_init_phy(bp, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: + rc = bnx2x_8727_common_init_phy(bp, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + /* GPIO1 affects both ports, so there's need to pull + * it for single port alone + */ + rc = bnx2x_8726_common_init_phy(bp, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858: + /* GPIO3's are linked, and so both need to be toggled + * to obtain required 2us pulse. + */ + rc = bnx2x_84833_common_init_phy(bp, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: + rc = -EINVAL; + break; + default: + DP(NETIF_MSG_LINK, + "ext_phy 0x%x common init not required\n", + ext_phy_type); + break; + } + + if (rc) + netdev_err(bp->dev, "Warning: PHY was not initialized," + " Port %d\n", + 0); + return rc; +} + +int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u32 chip_id) +{ + int rc = 0; + u32 phy_ver, val; + u8 phy_index = 0; + u32 ext_phy_type, ext_phy_config; + + bnx2x_set_mdio_clk(bp, chip_id, GRCBASE_EMAC0); + bnx2x_set_mdio_clk(bp, chip_id, GRCBASE_EMAC1); + DP(NETIF_MSG_LINK, "Begin common phy init\n"); + if (CHIP_IS_E3(bp)) { + /* Enable EPIO */ + val = REG_RD(bp, MISC_REG_GEN_PURP_HWG); + REG_WR(bp, MISC_REG_GEN_PURP_HWG, val | 1); + } + /* Check if common init was already done */ + phy_ver = REG_RD(bp, shmem_base_path[0] + + offsetof(struct shmem_region, + port_mb[PORT_0].ext_phy_fw_version)); + if (phy_ver) { + DP(NETIF_MSG_LINK, "Not doing common init; phy ver is 0x%x\n", + phy_ver); + return 0; + } + + /* Read the ext_phy_type for arbitrary port(0) */ + for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; + phy_index++) { + ext_phy_config = bnx2x_get_ext_phy_config(bp, + shmem_base_path[0], + phy_index, 0); + ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); + rc |= bnx2x_ext_phy_common_init(bp, shmem_base_path, + shmem2_base_path, + phy_index, ext_phy_type, + chip_id); + } + return rc; +} + +static void bnx2x_check_over_curr(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin; + u8 port = params->port; + u32 pin_val; + + cfg_pin = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg1)) & + PORT_HW_CFG_E3_OVER_CURRENT_MASK) >> + PORT_HW_CFG_E3_OVER_CURRENT_SHIFT; + + /* Ignore check if no external input PIN available */ + if (bnx2x_get_cfg_pin(bp, cfg_pin, &pin_val) != 0) + return; + + if (!pin_val) { + if ((vars->phy_flags & PHY_OVER_CURRENT_FLAG) == 0) { + netdev_err(bp->dev, "Error: Power fault on Port %d has" + " been detected and the power to " + "that SFP+ module has been removed" + " to prevent failure of the card." + " Please remove the SFP+ module and" + " restart the system to clear this" + " error.\n", + params->port); + vars->phy_flags |= PHY_OVER_CURRENT_FLAG; + bnx2x_warpcore_power_module(params, 0); + } + } else + vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG; +} + +/* Returns 0 if no change occurred since last check; 1 otherwise. */ +static u8 bnx2x_analyze_link_error(struct link_params *params, + struct link_vars *vars, u32 status, + u32 phy_flag, u32 link_flag, u8 notify) +{ + struct bnx2x *bp = params->bp; + /* Compare new value with previous value */ + u8 led_mode; + u32 old_status = (vars->phy_flags & phy_flag) ? 1 : 0; + + if ((status ^ old_status) == 0) + return 0; + + /* If values differ */ + switch (phy_flag) { + case PHY_HALF_OPEN_CONN_FLAG: + DP(NETIF_MSG_LINK, "Analyze Remote Fault\n"); + break; + case PHY_SFP_TX_FAULT_FLAG: + DP(NETIF_MSG_LINK, "Analyze TX Fault\n"); + break; + default: + DP(NETIF_MSG_LINK, "Analyze UNKNOWN\n"); + } + DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up, + old_status, status); + + /* Do not touch the link in case physical link down */ + if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) + return 1; + + /* a. Update shmem->link_status accordingly + * b. Update link_vars->link_up + */ + if (status) { + vars->link_status &= ~LINK_STATUS_LINK_UP; + vars->link_status |= link_flag; + vars->link_up = 0; + vars->phy_flags |= phy_flag; + + /* activate nig drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 1); + /* Set LED mode to off since the PHY doesn't know about these + * errors + */ + led_mode = LED_MODE_OFF; + } else { + vars->link_status |= LINK_STATUS_LINK_UP; + vars->link_status &= ~link_flag; + vars->link_up = 1; + vars->phy_flags &= ~phy_flag; + led_mode = LED_MODE_OPER; + + /* Clear nig drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + } + bnx2x_sync_link(params, vars); + /* Update the LED according to the link state */ + bnx2x_set_led(params, vars, led_mode, SPEED_10000); + + /* Update link status in the shared memory */ + bnx2x_update_mng(params, vars->link_status); + + /* C. Trigger General Attention */ + vars->periodic_flags |= PERIODIC_FLAGS_LINK_EVENT; + if (notify) + bnx2x_notify_link_changed(bp); + + return 1; +} + +/****************************************************************************** +* Description: +* This function checks for half opened connection change indication. +* When such change occurs, it calls the bnx2x_analyze_link_error +* to check if Remote Fault is set or cleared. Reception of remote fault +* status message in the MAC indicates that the peer's MAC has detected +* a fault, for example, due to break in the TX side of fiber. +* +******************************************************************************/ +static int bnx2x_check_half_open_conn(struct link_params *params, + struct link_vars *vars, + u8 notify) +{ + struct bnx2x *bp = params->bp; + u32 lss_status = 0; + u32 mac_base; + /* In case link status is physically up @ 10G do */ + if (((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) || + (REG_RD(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4))) + return 0; + + if (CHIP_IS_E3(bp) && + (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_XMAC))) { + /* Check E3 XMAC */ + /* Note that link speed cannot be queried here, since it may be + * zero while link is down. In case UMAC is active, LSS will + * simply not be set + */ + mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + /* Clear stick bits (Requires rising edge) */ + REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); + REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); + if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS)) + lss_status = 1; + + bnx2x_analyze_link_error(params, vars, lss_status, + PHY_HALF_OPEN_CONN_FLAG, + LINK_STATUS_NONE, notify); + } else if (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) { + /* Check E1X / E2 BMAC */ + u32 lss_status_reg; + u32 wb_data[2]; + mac_base = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + /* Read BIGMAC_REGISTER_RX_LSS_STATUS */ + if (CHIP_IS_E2(bp)) + lss_status_reg = BIGMAC2_REGISTER_RX_LSS_STAT; + else + lss_status_reg = BIGMAC_REGISTER_RX_LSS_STATUS; + + REG_RD_DMAE(bp, mac_base + lss_status_reg, wb_data, 2); + lss_status = (wb_data[0] > 0); + + bnx2x_analyze_link_error(params, vars, lss_status, + PHY_HALF_OPEN_CONN_FLAG, + LINK_STATUS_NONE, notify); + } + return 0; +} +static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin, value = 0; + u8 led_change, port = params->port; + + /* Get The SFP+ TX_Fault controlling pin ([eg]pio) */ + cfg_pin = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_TX_FAULT_MASK) >> + PORT_HW_CFG_E3_TX_FAULT_SHIFT; + + if (bnx2x_get_cfg_pin(bp, cfg_pin, &value)) { + DP(NETIF_MSG_LINK, "Failed to read pin 0x%02x\n", cfg_pin); + return; + } + + led_change = bnx2x_analyze_link_error(params, vars, value, + PHY_SFP_TX_FAULT_FLAG, + LINK_STATUS_SFP_TX_FAULT, 1); + + if (led_change) { + /* Change TX_Fault led, set link status for further syncs */ + u8 led_mode; + + if (vars->phy_flags & PHY_SFP_TX_FAULT_FLAG) { + led_mode = MISC_REGISTERS_GPIO_HIGH; + vars->link_status |= LINK_STATUS_SFP_TX_FAULT; + } else { + led_mode = MISC_REGISTERS_GPIO_LOW; + vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT; + } + + /* If module is unapproved, led should be on regardless */ + if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) { + DP(NETIF_MSG_LINK, "Change TX_Fault LED: ->%x\n", + led_mode); + bnx2x_set_e3_module_fault_led(params, led_mode); + } + } +} +static void bnx2x_kr2_recovery(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "KR2 recovery\n"); + bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + bnx2x_warpcore_restart_AN_KR(phy, params); +} + +static void bnx2x_check_kr2_wa(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + u16 base_page, next_page, not_kr2_device, lane; + int sigdet; + + /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery + * Since some switches tend to reinit the AN process and clear the + * the advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * and recovered many times + */ + if (vars->check_kr2_recovery_cnt > 0) { + vars->check_kr2_recovery_cnt--; + return; + } + + sigdet = bnx2x_warpcore_get_sigdet(phy, params); + if (!sigdet) { + if (!(params->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No sigdet\n"); + } + return; + } + + lane = bnx2x_get_warpcore_lane(phy, params); + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &base_page); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &next_page); + bnx2x_set_aer_mmd(params, phy); + + /* CL73 has not begun yet */ + if (base_page == 0) { + if (!(params->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No BP\n"); + } + return; + } + + /* In case NP bit is not set in the BasePage, or it is set, + * but only KX is advertised, declare this link partner as non-KR2 + * device. + */ + not_kr2_device = (((base_page & 0x8000) == 0) || + (((base_page & 0x8000) && + ((next_page & 0xe0) == 0x20)))); + + /* In case KR2 is already disabled, check if we need to re-enable it */ + if (!(params->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + if (!not_kr2_device) { + DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, + next_page); + bnx2x_kr2_recovery(params, vars, phy); + } + return; + } + /* KR2 is enabled, but not KR2 device */ + if (not_kr2_device) { + /* Disable KR2 on both lanes */ + DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page); + bnx2x_disable_kr2(params, vars, phy); + /* Restart AN on leading lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); + return; + } +} + +void bnx2x_period_func(struct link_params *params, struct link_vars *vars) +{ + u16 phy_idx; + struct bnx2x *bp = params->bp; + for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) { + bnx2x_set_aer_mmd(params, ¶ms->phy[phy_idx]); + if (bnx2x_check_half_open_conn(params, vars, 1) != + 0) + DP(NETIF_MSG_LINK, "Fault detection failed\n"); + break; + } + } + + if (CHIP_IS_E3(bp)) { + struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; + bnx2x_set_aer_mmd(params, phy); + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) || + (phy->req_line_speed == SPEED_20000)) + bnx2x_check_kr2_wa(params, vars, phy); + bnx2x_check_over_curr(params, vars); + if (vars->rx_tx_asic_rst) + bnx2x_warpcore_config_runtime(phy, params, vars); + + if ((REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) + & PORT_HW_CFG_NET_SERDES_IF_MASK) == + PORT_HW_CFG_NET_SERDES_IF_SFI) { + if (bnx2x_is_sfp_module_plugged(phy, params)) { + bnx2x_sfp_tx_fault_detection(phy, params, vars); + } else if (vars->link_status & + LINK_STATUS_SFP_TX_FAULT) { + /* Clean trail, interrupt corrects the leds */ + vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT; + vars->phy_flags &= ~PHY_SFP_TX_FAULT_FLAG; + /* Update link status in the shared memory */ + bnx2x_update_mng(params, vars->link_status); + } + } + } +} + +u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, + u32 shmem_base, + u32 shmem2_base, + u8 port) +{ + u8 phy_index, fan_failure_det_req = 0; + struct bnx2x_phy phy; + for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; + phy_index++) { + if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, + port, &phy) + != 0) { + DP(NETIF_MSG_LINK, "populate phy failed\n"); + return 0; + } + fan_failure_det_req |= (phy.flags & + FLAGS_FAN_FAILURE_DET_REQ); + } + return fan_failure_det_req; +} + +void bnx2x_hw_reset_phy(struct link_params *params) +{ + u8 phy_index; + struct bnx2x *bp = params->bp; + bnx2x_update_mng(params, 0); + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + for (phy_index = INT_PHY; phy_index < MAX_PHYS; + phy_index++) { + if (params->phy[phy_index].hw_reset) { + params->phy[phy_index].hw_reset( + ¶ms->phy[phy_index], + params); + params->phy[phy_index] = phy_null; + } + } +} + +void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, + u32 chip_id, u32 shmem_base, u32 shmem2_base, + u8 port) +{ + u8 gpio_num = 0xff, gpio_port = 0xff, phy_index; + u32 val; + u32 offset, aeu_mask, swap_val, swap_override, sync_offset; + if (CHIP_IS_E3(bp)) { + if (bnx2x_get_mod_abs_int_cfg(bp, chip_id, + shmem_base, + port, + &gpio_num, + &gpio_port) != 0) + return; + } else { + struct bnx2x_phy phy; + for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; + phy_index++) { + if (bnx2x_populate_phy(bp, phy_index, shmem_base, + shmem2_base, port, &phy) + != 0) { + DP(NETIF_MSG_LINK, "populate phy failed\n"); + return; + } + if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) { + gpio_num = MISC_REGISTERS_GPIO_3; + gpio_port = port; + break; + } + } + } + + if (gpio_num == 0xff) + return; + + /* Set GPIO3 to trigger SFP+ module insertion/removal */ + bnx2x_set_gpio(bp, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z, gpio_port); + + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + gpio_port ^= (swap_val && swap_override); + + vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 << + (gpio_num + (gpio_port << 2)); + + sync_offset = shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].aeu_int_mask); + REG_WR(bp, sync_offset, vars->aeu_int_mask); + + DP(NETIF_MSG_LINK, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x\n", + gpio_num, gpio_port, vars->aeu_int_mask); + + if (port == 0) + offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0; + else + offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0; + + /* Open appropriate AEU for interrupts */ + aeu_mask = REG_RD(bp, offset); + aeu_mask |= vars->aeu_int_mask; + REG_WR(bp, offset, aeu_mask); + + /* Enable the GPIO to trigger interrupt */ + val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); + val |= 1 << (gpio_num + (gpio_port << 2)); + REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h new file mode 100644 index 000000000..7115f5025 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -0,0 +1,547 @@ +/* Copyright 2008-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Qlogic software provided under a + * license other than the GPL, without Qlogic's express prior written + * consent. + * + * Written by Yaniv Rosner + * + */ + +#ifndef BNX2X_LINK_H +#define BNX2X_LINK_H + + + +/***********************************************************/ +/* Defines */ +/***********************************************************/ +#define DEFAULT_PHY_DEV_ADDR 3 +#define E2_DEFAULT_PHY_DEV_ADDR 5 + + + +#define BNX2X_FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO +#define BNX2X_FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX +#define BNX2X_FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX +#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH +#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE + +#define NET_SERDES_IF_XFI 1 +#define NET_SERDES_IF_SFI 2 +#define NET_SERDES_IF_KR 3 +#define NET_SERDES_IF_DXGXS 4 + +#define SPEED_AUTO_NEG 0 +#define SPEED_20000 20000 + +#define I2C_DEV_ADDR_A0 0xa0 +#define I2C_DEV_ADDR_A2 0xa2 + +#define SFP_EEPROM_PAGE_SIZE 16 +#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 +#define SFP_EEPROM_VENDOR_NAME_SIZE 16 +#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25 +#define SFP_EEPROM_VENDOR_OUI_SIZE 3 +#define SFP_EEPROM_PART_NO_ADDR 0x28 +#define SFP_EEPROM_PART_NO_SIZE 16 +#define SFP_EEPROM_REVISION_ADDR 0x38 +#define SFP_EEPROM_REVISION_SIZE 4 +#define SFP_EEPROM_SERIAL_ADDR 0x44 +#define SFP_EEPROM_SERIAL_SIZE 16 +#define SFP_EEPROM_DATE_ADDR 0x54 /* ASCII YYMMDD */ +#define SFP_EEPROM_DATE_SIZE 6 +#define SFP_EEPROM_DIAG_TYPE_ADDR 0x5c +#define SFP_EEPROM_DIAG_TYPE_SIZE 1 +#define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1<<2) +#define SFP_EEPROM_DDM_IMPLEMENTED (1<<6) +#define SFP_EEPROM_SFF_8472_COMP_ADDR 0x5e +#define SFP_EEPROM_SFF_8472_COMP_SIZE 1 + +#define SFP_EEPROM_A2_CHECKSUM_RANGE 0x5e +#define SFP_EEPROM_A2_CC_DMI_ADDR 0x5f + +#define PWR_FLT_ERR_MSG_LEN 250 + +#define XGXS_EXT_PHY_TYPE(ext_phy_config) \ + ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK) +#define XGXS_EXT_PHY_ADDR(ext_phy_config) \ + (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \ + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT) +#define SERDES_EXT_PHY_TYPE(ext_phy_config) \ + ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) + +/* Single Media Direct board is the plain 577xx board with CX4/RJ45 jacks */ +#define SINGLE_MEDIA_DIRECT(params) (params->num_phys == 1) +/* Single Media board contains single external phy */ +#define SINGLE_MEDIA(params) (params->num_phys == 2) +/* Dual Media board contains two external phy with different media */ +#define DUAL_MEDIA(params) (params->num_phys == 3) + +#define FW_PARAM_PHY_ADDR_MASK 0x000000FF +#define FW_PARAM_PHY_TYPE_MASK 0x0000FF00 +#define FW_PARAM_MDIO_CTRL_MASK 0xFFFF0000 +#define FW_PARAM_MDIO_CTRL_OFFSET 16 +#define FW_PARAM_PHY_ADDR(fw_param) (fw_param & \ + FW_PARAM_PHY_ADDR_MASK) +#define FW_PARAM_PHY_TYPE(fw_param) (fw_param & \ + FW_PARAM_PHY_TYPE_MASK) +#define FW_PARAM_MDIO_CTRL(fw_param) ((fw_param & \ + FW_PARAM_MDIO_CTRL_MASK) >> \ + FW_PARAM_MDIO_CTRL_OFFSET) +#define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \ + (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET) + + +#define PFC_BRB_FULL_LB_XOFF_THRESHOLD 170 +#define PFC_BRB_FULL_LB_XON_THRESHOLD 250 + +#define MAXVAL(a, b) (((a) > (b)) ? (a) : (b)) + +#define BMAC_CONTROL_RX_ENABLE 2 +/***********************************************************/ +/* Structs */ +/***********************************************************/ +#define INT_PHY 0 +#define EXT_PHY1 1 +#define EXT_PHY2 2 +#define MAX_PHYS 3 + +/* Same configuration is shared between the XGXS and the first external phy */ +#define LINK_CONFIG_SIZE (MAX_PHYS - 1) +#define LINK_CONFIG_IDX(_phy_idx) ((_phy_idx == INT_PHY) ? \ + 0 : (_phy_idx - 1)) +/***********************************************************/ +/* bnx2x_phy struct */ +/* Defines the required arguments and function per phy */ +/***********************************************************/ +struct link_vars; +struct link_params; +struct bnx2x_phy; + +typedef u8 (*config_init_t)(struct bnx2x_phy *phy, struct link_params *params, + struct link_vars *vars); +typedef u8 (*read_status_t)(struct bnx2x_phy *phy, struct link_params *params, + struct link_vars *vars); +typedef void (*link_reset_t)(struct bnx2x_phy *phy, + struct link_params *params); +typedef void (*config_loopback_t)(struct bnx2x_phy *phy, + struct link_params *params); +typedef u8 (*format_fw_ver_t)(u32 raw, u8 *str, u16 *len); +typedef void (*hw_reset_t)(struct bnx2x_phy *phy, struct link_params *params); +typedef void (*set_link_led_t)(struct bnx2x_phy *phy, + struct link_params *params, u8 mode); +typedef void (*phy_specific_func_t)(struct bnx2x_phy *phy, + struct link_params *params, u32 action); +struct bnx2x_reg_set { + u8 devad; + u16 reg; + u16 val; +}; + +struct bnx2x_phy { + u32 type; + + /* Loaded during init */ + u8 addr; + u8 def_md_devad; + u16 flags; + /* No Over-Current detection */ +#define FLAGS_NOC (1<<1) + /* Fan failure detection required */ +#define FLAGS_FAN_FAILURE_DET_REQ (1<<2) + /* Initialize first the XGXS and only then the phy itself */ +#define FLAGS_INIT_XGXS_FIRST (1<<3) +#define FLAGS_WC_DUAL_MODE (1<<4) +#define FLAGS_4_PORT_MODE (1<<5) +#define FLAGS_REARM_LATCH_SIGNAL (1<<6) +#define FLAGS_SFP_NOT_APPROVED (1<<7) +#define FLAGS_MDC_MDIO_WA (1<<8) +#define FLAGS_DUMMY_READ (1<<9) +#define FLAGS_MDC_MDIO_WA_B0 (1<<10) +#define FLAGS_TX_ERROR_CHECK (1<<12) +#define FLAGS_EEE (1<<13) +#define FLAGS_MDC_MDIO_WA_G (1<<15) + + /* preemphasis values for the rx side */ + u16 rx_preemphasis[4]; + + /* preemphasis values for the tx side */ + u16 tx_preemphasis[4]; + + /* EMAC address for access MDIO */ + u32 mdio_ctrl; + + u32 supported; + + u32 media_type; +#define ETH_PHY_UNSPECIFIED 0x0 +#define ETH_PHY_SFPP_10G_FIBER 0x1 +#define ETH_PHY_XFP_FIBER 0x2 +#define ETH_PHY_DA_TWINAX 0x3 +#define ETH_PHY_BASE_T 0x4 +#define ETH_PHY_SFP_1G_FIBER 0x5 +#define ETH_PHY_KR 0xf0 +#define ETH_PHY_CX4 0xf1 +#define ETH_PHY_NOT_PRESENT 0xff + + /* The address in which version is located*/ + u32 ver_addr; + + u16 req_flow_ctrl; + + u16 req_line_speed; + + u32 speed_cap_mask; + + u16 req_duplex; + u16 rsrv; + /* Called per phy/port init, and it configures LASI, speed, autoneg, + duplex, flow control negotiation, etc. */ + config_init_t config_init; + + /* Called due to interrupt. It determines the link, speed */ + read_status_t read_status; + + /* Called when driver is unloading. Should reset the phy */ + link_reset_t link_reset; + + /* Set the loopback configuration for the phy */ + config_loopback_t config_loopback; + + /* Format the given raw number into str up to len */ + format_fw_ver_t format_fw_ver; + + /* Reset the phy (both ports) */ + hw_reset_t hw_reset; + + /* Set link led mode (on/off/oper)*/ + set_link_led_t set_link_led; + + /* PHY Specific tasks */ + phy_specific_func_t phy_specific_func; +#define DISABLE_TX 1 +#define ENABLE_TX 2 +#define PHY_INIT 3 +}; + +/* Inputs parameters to the CLC */ +struct link_params { + + u8 port; + + /* Default / User Configuration */ + u8 loopback_mode; +#define LOOPBACK_NONE 0 +#define LOOPBACK_EMAC 1 +#define LOOPBACK_BMAC 2 +#define LOOPBACK_XGXS 3 +#define LOOPBACK_EXT_PHY 4 +#define LOOPBACK_EXT 5 +#define LOOPBACK_UMAC 6 +#define LOOPBACK_XMAC 7 + + /* Device parameters */ + u8 mac_addr[6]; + + u16 req_duplex[LINK_CONFIG_SIZE]; + u16 req_flow_ctrl[LINK_CONFIG_SIZE]; + + u16 req_line_speed[LINK_CONFIG_SIZE]; /* Also determine AutoNeg */ + + /* shmem parameters */ + u32 shmem_base; + u32 shmem2_base; + u32 speed_cap_mask[LINK_CONFIG_SIZE]; + u32 switch_cfg; +#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH +#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH +#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT + + u32 lane_config; + + /* Phy register parameter */ + u32 chip_id; + + /* features */ + u32 feature_config_flags; +#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) +#define FEATURE_CONFIG_PFC_ENABLED (1<<1) +#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) +#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3) +#define FEATURE_CONFIG_BC_SUPPORTS_AFEX (1<<8) +#define FEATURE_CONFIG_AUTOGREEEN_ENABLED (1<<9) +#define FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1<<10) +#define FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET (1<<11) +#define FEATURE_CONFIG_MT_SUPPORT (1<<13) +#define FEATURE_CONFIG_BOOT_FROM_SAN (1<<14) + + /* Will be populated during common init */ + struct bnx2x_phy phy[MAX_PHYS]; + + /* Will be populated during common init */ + u8 num_phys; + + u8 rsrv; + + /* Used to configure the EEE Tx LPI timer, has several modes of + * operation, according to bits 29:28 - + * 2'b00: Timer will be configured by nvram, output will be the value + * from nvram. + * 2'b01: Timer will be configured by nvram, output will be in + * microseconds. + * 2'b10: bits 1:0 contain an nvram value which will be used instead + * of the one located in the nvram. Output will be that value. + * 2'b11: bits 19:0 contain the idle timer in microseconds; output + * will be in microseconds. + * Bits 31:30 should be 2'b11 in order for EEE to be enabled. + */ + u32 eee_mode; +#define EEE_MODE_NVRAM_BALANCED_TIME (0xa00) +#define EEE_MODE_NVRAM_AGGRESSIVE_TIME (0x100) +#define EEE_MODE_NVRAM_LATENCY_TIME (0x6000) +#define EEE_MODE_NVRAM_MASK (0x3) +#define EEE_MODE_TIMER_MASK (0xfffff) +#define EEE_MODE_OUTPUT_TIME (1<<28) +#define EEE_MODE_OVERRIDE_NVRAM (1<<29) +#define EEE_MODE_ENABLE_LPI (1<<30) +#define EEE_MODE_ADV_LPI (1<<31) + + u16 hw_led_mode; /* part of the hw_config read from the shmem */ + u32 multi_phy_config; + + /* Device pointer passed to all callback functions */ + struct bnx2x *bp; + u16 req_fc_auto_adv; /* Should be set to TX / BOTH when + req_flow_ctrl is set to AUTO */ + u16 link_flags; +#define LINK_FLAGS_INT_DISABLED (1<<0) +#define PHY_INITIALIZED (1<<1) + u32 lfa_base; + + /* The same definitions as the shmem2 parameter */ + u32 link_attr_sync; +}; + +/* Output parameters */ +struct link_vars { + u8 phy_flags; +#define PHY_XGXS_FLAG (1<<0) +#define PHY_SGMII_FLAG (1<<1) +#define PHY_PHYSICAL_LINK_FLAG (1<<2) +#define PHY_HALF_OPEN_CONN_FLAG (1<<3) +#define PHY_OVER_CURRENT_FLAG (1<<4) +#define PHY_SFP_TX_FAULT_FLAG (1<<5) + + u8 mac_type; +#define MAC_TYPE_NONE 0 +#define MAC_TYPE_EMAC 1 +#define MAC_TYPE_BMAC 2 +#define MAC_TYPE_UMAC 3 +#define MAC_TYPE_XMAC 4 + + u8 phy_link_up; /* internal phy link indication */ + u8 link_up; + + u16 line_speed; + u16 duplex; + + u16 flow_ctrl; + u16 ieee_fc; + + /* The same definitions as the shmem parameter */ + u32 link_status; + u32 eee_status; + u8 fault_detected; + u8 check_kr2_recovery_cnt; +#define CHECK_KR2_RECOVERY_CNT 5 + u16 periodic_flags; +#define PERIODIC_FLAGS_LINK_EVENT 0x0001 + + u32 aeu_int_mask; + u8 rx_tx_asic_rst; + u8 turn_to_run_wc_rt; + u16 rsrv2; +}; + +/***********************************************************/ +/* Functions */ +/***********************************************************/ +int bnx2x_phy_init(struct link_params *params, struct link_vars *vars); + +/* Reset the link. Should be called when driver or interface goes down + Before calling phy firmware upgrade, the reset_ext_phy should be set + to 0 */ +int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy); +int bnx2x_lfa_reset(struct link_params *params, struct link_vars *vars); +/* bnx2x_link_update should be called upon link interrupt */ +int bnx2x_link_update(struct link_params *params, struct link_vars *vars); + +/* use the following phy functions to read/write from external_phy + In order to use it to read/write internal phy registers, use + DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as + the register */ +int bnx2x_phy_read(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 *ret_val); + +int bnx2x_phy_write(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 val); + +/* Reads the link_status from the shmem, + and update the link vars accordingly */ +void bnx2x_link_status_update(struct link_params *input, + struct link_vars *output); +/* returns string representing the fw_version of the external phy */ +int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 *version, + u16 len); + +/* Set/Unset the led + Basically, the CLC takes care of the led for the link, but in case one needs + to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to + blink the led, and LED_MODE_OFF to set the led off.*/ +int bnx2x_set_led(struct link_params *params, + struct link_vars *vars, u8 mode, u32 speed); +#define LED_MODE_OFF 0 +#define LED_MODE_ON 1 +#define LED_MODE_OPER 2 +#define LED_MODE_FRONT_PANEL_OFF 3 + +/* bnx2x_handle_module_detect_int should be called upon module detection + interrupt */ +void bnx2x_handle_module_detect_int(struct link_params *params); + +/* Get the actual link status. In case it returns 0, link is up, + otherwise link is down*/ +int bnx2x_test_link(struct link_params *params, struct link_vars *vars, + u8 is_serdes); + +/* One-time initialization for external phy after power up */ +int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u32 chip_id); + +/* Reset the external PHY using GPIO */ +void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); + +/* Reset the external of SFX7101 */ +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy); + +/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ +int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u8 dev_addr, + u16 addr, u16 byte_cnt, u8 *o_buf); + +void bnx2x_hw_reset_phy(struct link_params *params); + +/* Check swap bit and adjust PHY order */ +u32 bnx2x_phy_selection(struct link_params *params); + +/* Probe the phys on board, and populate them in "params" */ +int bnx2x_phy_probe(struct link_params *params); + +/* Checks if fan failure detection is required on one of the phys on board */ +u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base, + u32 shmem2_base, u8 port); + +/* Open / close the gate between the NIG and the BRB */ +void bnx2x_set_rx_filter(struct link_params *params, u8 en); + +/* DCBX structs */ + +/* Number of maximum COS per chip */ +#define DCBX_E2E3_MAX_NUM_COS (2) +#define DCBX_E3B0_MAX_NUM_COS_PORT0 (6) +#define DCBX_E3B0_MAX_NUM_COS_PORT1 (3) +#define DCBX_E3B0_MAX_NUM_COS ( \ + MAXVAL(DCBX_E3B0_MAX_NUM_COS_PORT0, \ + DCBX_E3B0_MAX_NUM_COS_PORT1)) + +#define DCBX_MAX_NUM_COS ( \ + MAXVAL(DCBX_E3B0_MAX_NUM_COS, \ + DCBX_E2E3_MAX_NUM_COS)) + +/* PFC port configuration params */ +struct bnx2x_nig_brb_pfc_port_params { + /* NIG */ + u32 pause_enable; + u32 llfc_out_en; + u32 llfc_enable; + u32 pkt_priority_to_cos; + u8 num_of_rx_cos_priority_mask; + u32 rx_cos_priority_mask[DCBX_MAX_NUM_COS]; + u32 llfc_high_priority_classes; + u32 llfc_low_priority_classes; +}; + + +/* ETS port configuration params */ +struct bnx2x_ets_bw_params { + u8 bw; +}; + +struct bnx2x_ets_sp_params { + /** + * valid values are 0 - 5. 0 is highest strict priority. + * There can't be two COS's with the same pri. + */ + u8 pri; +}; + +enum bnx2x_cos_state { + bnx2x_cos_state_strict = 0, + bnx2x_cos_state_bw = 1, +}; + +struct bnx2x_ets_cos_params { + enum bnx2x_cos_state state ; + union { + struct bnx2x_ets_bw_params bw_params; + struct bnx2x_ets_sp_params sp_params; + } params; +}; + +struct bnx2x_ets_params { + u8 num_of_cos; /* Number of valid COS entries*/ + struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS]; +}; + +/* Used to update the PFC attributes in EMAC, BMAC, NIG and BRB + * when link is already up + */ +int bnx2x_update_pfc(struct link_params *params, + struct link_vars *vars, + struct bnx2x_nig_brb_pfc_port_params *pfc_params); + + +/* Used to configure the ETS to disable */ +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars); + +/* Used to configure the ETS to BW limited */ +void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, + const u32 cos1_bw); + +/* Used to configure the ETS to strict */ +int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); + + +/* Configure the COS to ETS according to BW and SP settings.*/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + struct bnx2x_ets_params *ets_params); + +void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, + u32 chip_id, u32 shmem_base, u32 shmem2_base, + u8 port); + +void bnx2x_period_func(struct link_params *params, struct link_vars *vars); + +#endif /* BNX2X_LINK_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c new file mode 100644 index 000000000..91ddde4d6 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -0,0 +1,15609 @@ +/* bnx2x_main.c: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/device.h> /* for dev_info() */ +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/aer.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/dma-mapping.h> +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <asm/byteorder.h> +#include <linux/time.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/if_vlan.h> +#include <linux/crash_dump.h> +#include <net/ip.h> +#include <net/ipv6.h> +#include <net/tcp.h> +#include <net/vxlan.h> +#include <net/checksum.h> +#include <net/ip6_checksum.h> +#include <linux/workqueue.h> +#include <linux/crc32.h> +#include <linux/crc32c.h> +#include <linux/prefetch.h> +#include <linux/zlib.h> +#include <linux/io.h> +#include <linux/semaphore.h> +#include <linux/stringify.h> +#include <linux/vmalloc.h> +#include "bnx2x.h" +#include "bnx2x_init.h" +#include "bnx2x_init_ops.h" +#include "bnx2x_cmn.h" +#include "bnx2x_vfpf.h" +#include "bnx2x_dcb.h" +#include "bnx2x_sp.h" +#include <linux/firmware.h> +#include "bnx2x_fw_file_hdr.h" +/* FW files */ +#define FW_FILE_VERSION \ + __stringify(BCM_5710_FW_MAJOR_VERSION) "." \ + __stringify(BCM_5710_FW_MINOR_VERSION) "." \ + __stringify(BCM_5710_FW_REVISION_VERSION) "." \ + __stringify(BCM_5710_FW_ENGINEERING_VERSION) +#define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw" +#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw" +#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw" + +/* Time in jiffies before concluding the transmitter is hung */ +#define TX_TIMEOUT (5*HZ) + +static char version[] = + "QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver " + DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Eliezer Tamir"); +MODULE_DESCRIPTION("QLogic " + "BCM57710/57711/57711E/" + "57712/57712_MF/57800/57800_MF/57810/57810_MF/" + "57840/57840_MF Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); +MODULE_FIRMWARE(FW_FILE_NAME_E1); +MODULE_FIRMWARE(FW_FILE_NAME_E1H); +MODULE_FIRMWARE(FW_FILE_NAME_E2); + +int bnx2x_num_queues; +module_param_named(num_queues, bnx2x_num_queues, int, 0444); +MODULE_PARM_DESC(num_queues, + " Set number of queues (default is as a number of CPUs)"); + +static int disable_tpa; +module_param(disable_tpa, int, 0444); +MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); + +static int int_mode; +module_param(int_mode, int, 0444); +MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " + "(1 INT#x; 2 MSI)"); + +static int dropless_fc; +module_param(dropless_fc, int, 0444); +MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); + +static int mrrs = -1; +module_param(mrrs, int, 0444); +MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); + +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, " Default debug msglevel"); + +static struct workqueue_struct *bnx2x_wq; +struct workqueue_struct *bnx2x_iov_wq; + +struct bnx2x_mac_vals { + u32 xmac_addr; + u32 xmac_val; + u32 emac_addr; + u32 emac_val; + u32 umac_addr[2]; + u32 umac_val[2]; + u32 bmac_addr; + u32 bmac_val[2]; +}; + +enum bnx2x_board_type { + BCM57710 = 0, + BCM57711, + BCM57711E, + BCM57712, + BCM57712_MF, + BCM57712_VF, + BCM57800, + BCM57800_MF, + BCM57800_VF, + BCM57810, + BCM57810_MF, + BCM57810_VF, + BCM57840_4_10, + BCM57840_2_20, + BCM57840_MF, + BCM57840_VF, + BCM57811, + BCM57811_MF, + BCM57840_O, + BCM57840_MFO, + BCM57811_VF +}; + +/* indexed by board_type, above */ +static struct { + char *name; +} board_info[] = { + [BCM57710] = { "QLogic BCM57710 10 Gigabit PCIe [Everest]" }, + [BCM57711] = { "QLogic BCM57711 10 Gigabit PCIe" }, + [BCM57711E] = { "QLogic BCM57711E 10 Gigabit PCIe" }, + [BCM57712] = { "QLogic BCM57712 10 Gigabit Ethernet" }, + [BCM57712_MF] = { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" }, + [BCM57712_VF] = { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" }, + [BCM57800] = { "QLogic BCM57800 10 Gigabit Ethernet" }, + [BCM57800_MF] = { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" }, + [BCM57800_VF] = { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" }, + [BCM57810] = { "QLogic BCM57810 10 Gigabit Ethernet" }, + [BCM57810_MF] = { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" }, + [BCM57810_VF] = { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" }, + [BCM57840_4_10] = { "QLogic BCM57840 10 Gigabit Ethernet" }, + [BCM57840_2_20] = { "QLogic BCM57840 20 Gigabit Ethernet" }, + [BCM57840_MF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57840_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }, + [BCM57811] = { "QLogic BCM57811 10 Gigabit Ethernet" }, + [BCM57811_MF] = { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" }, + [BCM57840_O] = { "QLogic BCM57840 10/20 Gigabit Ethernet" }, + [BCM57840_MFO] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" }, + [BCM57811_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" } +}; + +#ifndef PCI_DEVICE_ID_NX2_57710 +#define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710 +#endif +#ifndef PCI_DEVICE_ID_NX2_57711 +#define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711 +#endif +#ifndef PCI_DEVICE_ID_NX2_57711E +#define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E +#endif +#ifndef PCI_DEVICE_ID_NX2_57712 +#define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712 +#endif +#ifndef PCI_DEVICE_ID_NX2_57712_MF +#define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57712_VF +#define PCI_DEVICE_ID_NX2_57712_VF CHIP_NUM_57712_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57800 +#define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800 +#endif +#ifndef PCI_DEVICE_ID_NX2_57800_MF +#define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57800_VF +#define PCI_DEVICE_ID_NX2_57800_VF CHIP_NUM_57800_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57810 +#define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810 +#endif +#ifndef PCI_DEVICE_ID_NX2_57810_MF +#define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_O +#define PCI_DEVICE_ID_NX2_57840_O CHIP_NUM_57840_OBSOLETE +#endif +#ifndef PCI_DEVICE_ID_NX2_57810_VF +#define PCI_DEVICE_ID_NX2_57810_VF CHIP_NUM_57810_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_4_10 +#define PCI_DEVICE_ID_NX2_57840_4_10 CHIP_NUM_57840_4_10 +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_2_20 +#define PCI_DEVICE_ID_NX2_57840_2_20 CHIP_NUM_57840_2_20 +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_MFO +#define PCI_DEVICE_ID_NX2_57840_MFO CHIP_NUM_57840_MF_OBSOLETE +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_MF +#define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_VF +#define PCI_DEVICE_ID_NX2_57840_VF CHIP_NUM_57840_VF +#endif +#ifndef PCI_DEVICE_ID_NX2_57811 +#define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811 +#endif +#ifndef PCI_DEVICE_ID_NX2_57811_MF +#define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57811_VF +#define PCI_DEVICE_ID_NX2_57811_VF CHIP_NUM_57811_VF +#endif + +static const struct pci_device_id bnx2x_pci_tbl[] = { + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_VF), BCM57712_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_VF), BCM57800_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_O), BCM57840_O }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, + { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_4_10), BCM57840_4_10 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_2_20), BCM57840_2_20 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_VF), BCM57810_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MFO), BCM57840_MFO }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, + { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, + { PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_NX2_57840_VF), BCM57840_VF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_VF), BCM57811_VF }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl); + +/* Global resources for unloading a previously loaded device */ +#define BNX2X_PREV_WAIT_NEEDED 1 +static DEFINE_SEMAPHORE(bnx2x_prev_sem); +static LIST_HEAD(bnx2x_prev_list); + +/* Forward declaration */ +static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev); +static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp); +static int bnx2x_set_storm_rx_mode(struct bnx2x *bp); + +/**************************************************************************** +* General service functions +****************************************************************************/ + +static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr); + +static void __storm_memset_dma_mapping(struct bnx2x *bp, + u32 addr, dma_addr_t mapping) +{ + REG_WR(bp, addr, U64_LO(mapping)); + REG_WR(bp, addr + 4, U64_HI(mapping)); +} + +static void storm_memset_spq_addr(struct bnx2x *bp, + dma_addr_t mapping, u16 abs_fid) +{ + u32 addr = XSEM_REG_FAST_MEMORY + + XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid); + + __storm_memset_dma_mapping(bp, addr, mapping); +} + +static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, + u16 pf_id) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); +} + +static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, + u8 enable) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), + enable); +} + +static void storm_memset_eq_data(struct bnx2x *bp, + struct event_ring_data *eq_data, + u16 pfid) +{ + size_t size = sizeof(struct event_ring_data); + + u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid); + + __storm_memset_struct(bp, addr, size, (u32 *)eq_data); +} + +static void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod, + u16 pfid) +{ + u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid); + REG_WR16(bp, addr, eq_prod); +} + +/* used only at init + * locking is done by mcp + */ +static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val) +{ + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); + pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val); + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); +} + +static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr) +{ + u32 val; + + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); + pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val); + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); + + return val; +} + +#define DMAE_DP_SRC_GRC "grc src_addr [%08x]" +#define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]" +#define DMAE_DP_DST_GRC "grc dst_addr [%08x]" +#define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]" +#define DMAE_DP_DST_NONE "dst_addr [none]" + +static void bnx2x_dp_dmae(struct bnx2x *bp, + struct dmae_command *dmae, int msglvl) +{ + u32 src_type = dmae->opcode & DMAE_COMMAND_SRC; + int i; + + switch (dmae->opcode & DMAE_COMMAND_DST) { + case DMAE_CMD_DST_PCI: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + case DMAE_CMD_DST_GRC: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst_addr [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + default: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + } + + for (i = 0; i < (sizeof(struct dmae_command)/4); i++) + DP(msglvl, "DMAE RAW [%02d]: 0x%08x\n", + i, *(((u32 *)dmae) + i)); +} + +/* copy command into DMAE command memory and set DMAE command go */ +void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx) +{ + u32 cmd_offset; + int i; + + cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx); + for (i = 0; i < (sizeof(struct dmae_command)/4); i++) { + REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i)); + } + REG_WR(bp, dmae_reg_go_c[idx], 1); +} + +u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type) +{ + return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) | + DMAE_CMD_C_ENABLE); +} + +u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode) +{ + return opcode & ~DMAE_CMD_SRC_RESET; +} + +u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, + bool with_comp, u8 comp_type) +{ + u32 opcode = 0; + + opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) | + (dst_type << DMAE_COMMAND_DST_SHIFT)); + + opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); + + opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); + opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | + (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); + opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); + +#ifdef __BIG_ENDIAN + opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP; +#else + opcode |= DMAE_CMD_ENDIANITY_DW_SWAP; +#endif + if (with_comp) + opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type); + return opcode; +} + +void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, + struct dmae_command *dmae, + u8 src_type, u8 dst_type) +{ + memset(dmae, 0, sizeof(struct dmae_command)); + + /* set the opcode */ + dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type, + true, DMAE_COMP_PCI); + + /* fill in the completion parameters */ + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp)); + dmae->comp_val = DMAE_COMP_VAL; +} + +/* issue a dmae command over the init-channel and wait for completion */ +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp) +{ + int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; + int rc = 0; + + bnx2x_dp_dmae(bp, dmae, BNX2X_MSG_DMAE); + + /* Lock the dmae channel. Disable BHs to prevent a dead-lock + * as long as this code is called both from syscall context and + * from ndo_set_rx_mode() flow that may be called from BH. + */ + + spin_lock_bh(&bp->dmae_lock); + + /* reset completion */ + *comp = 0; + + /* post the command on the channel used for initializations */ + bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); + + /* wait for completion */ + udelay(5); + while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { + + if (!cnt || + (bp->recovery_state != BNX2X_RECOVERY_DONE && + bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { + BNX2X_ERR("DMAE timeout!\n"); + rc = DMAE_TIMEOUT; + goto unlock; + } + cnt--; + udelay(50); + } + if (*comp & DMAE_PCI_ERR_FLAG) { + BNX2X_ERR("DMAE PCI error!\n"); + rc = DMAE_PCI_ERROR; + } + +unlock: + + spin_unlock_bh(&bp->dmae_lock); + + return rc; +} + +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, + u32 len32) +{ + int rc; + struct dmae_command dmae; + + if (!bp->dmae_ready) { + u32 *data = bnx2x_sp(bp, wb_data[0]); + + if (CHIP_IS_E1(bp)) + bnx2x_init_ind_wr(bp, dst_addr, data, len32); + else + bnx2x_init_str_wr(bp, dst_addr, data, len32); + return; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC); + + /* fill in addresses and len */ + dmae.src_addr_lo = U64_LO(dma_addr); + dmae.src_addr_hi = U64_HI(dma_addr); + dmae.dst_addr_lo = dst_addr >> 2; + dmae.dst_addr_hi = 0; + dmae.len = len32; + + /* issue the command and wait for completion */ + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); + if (rc) { + BNX2X_ERR("DMAE returned failure %d\n", rc); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + } +} + +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) +{ + int rc; + struct dmae_command dmae; + + if (!bp->dmae_ready) { + u32 *data = bnx2x_sp(bp, wb_data[0]); + int i; + + if (CHIP_IS_E1(bp)) + for (i = 0; i < len32; i++) + data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); + else + for (i = 0; i < len32; i++) + data[i] = REG_RD(bp, src_addr + i*4); + + return; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI); + + /* fill in addresses and len */ + dmae.src_addr_lo = src_addr >> 2; + dmae.src_addr_hi = 0; + dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data)); + dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data)); + dmae.len = len32; + + /* issue the command and wait for completion */ + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); + if (rc) { + BNX2X_ERR("DMAE returned failure %d\n", rc); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + } +} + +static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr, + u32 addr, u32 len) +{ + int dmae_wr_max = DMAE_LEN32_WR_MAX(bp); + int offset = 0; + + while (len > dmae_wr_max) { + bnx2x_write_dmae(bp, phys_addr + offset, + addr + offset, dmae_wr_max); + offset += dmae_wr_max * 4; + len -= dmae_wr_max; + } + + bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len); +} + +enum storms { + XSTORM, + TSTORM, + CSTORM, + USTORM, + MAX_STORMS +}; + +#define STORMS_NUM 4 +#define REGS_IN_ENTRY 4 + +static inline int bnx2x_get_assert_list_entry(struct bnx2x *bp, + enum storms storm, + int entry) +{ + switch (storm) { + case XSTORM: + return XSTORM_ASSERT_LIST_OFFSET(entry); + case TSTORM: + return TSTORM_ASSERT_LIST_OFFSET(entry); + case CSTORM: + return CSTORM_ASSERT_LIST_OFFSET(entry); + case USTORM: + return USTORM_ASSERT_LIST_OFFSET(entry); + case MAX_STORMS: + default: + BNX2X_ERR("unknown storm\n"); + } + return -EINVAL; +} + +static int bnx2x_mc_assert(struct bnx2x *bp) +{ + char last_idx; + int i, j, rc = 0; + enum storms storm; + u32 regs[REGS_IN_ENTRY]; + u32 bar_storm_intmem[STORMS_NUM] = { + BAR_XSTRORM_INTMEM, + BAR_TSTRORM_INTMEM, + BAR_CSTRORM_INTMEM, + BAR_USTRORM_INTMEM + }; + u32 storm_assert_list_index[STORMS_NUM] = { + XSTORM_ASSERT_LIST_INDEX_OFFSET, + TSTORM_ASSERT_LIST_INDEX_OFFSET, + CSTORM_ASSERT_LIST_INDEX_OFFSET, + USTORM_ASSERT_LIST_INDEX_OFFSET + }; + char *storms_string[STORMS_NUM] = { + "XSTORM", + "TSTORM", + "CSTORM", + "USTORM" + }; + + for (storm = XSTORM; storm < MAX_STORMS; storm++) { + last_idx = REG_RD8(bp, bar_storm_intmem[storm] + + storm_assert_list_index[storm]); + if (last_idx) + BNX2X_ERR("%s_ASSERT_LIST_INDEX 0x%x\n", + storms_string[storm], last_idx); + + /* print the asserts */ + for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { + /* read a single assert entry */ + for (j = 0; j < REGS_IN_ENTRY; j++) + regs[j] = REG_RD(bp, bar_storm_intmem[storm] + + bnx2x_get_assert_list_entry(bp, + storm, + i) + + sizeof(u32) * j); + + /* log entry if it contains a valid assert */ + if (regs[0] != COMMON_ASM_INVALID_ASSERT_OPCODE) { + BNX2X_ERR("%s_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n", + storms_string[storm], i, regs[3], + regs[2], regs[1], regs[0]); + rc++; + } else { + break; + } + } + } + + BNX2X_ERR("Chip Revision: %s, FW Version: %d_%d_%d\n", + CHIP_IS_E1(bp) ? "everest1" : + CHIP_IS_E1H(bp) ? "everest1h" : + CHIP_IS_E2(bp) ? "everest2" : "everest3", + BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION); + + return rc; +} + +#define MCPR_TRACE_BUFFER_SIZE (0x800) +#define SCRATCH_BUFFER_SIZE(bp) \ + (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000)) + +void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) +{ + u32 addr, val; + u32 mark, offset; + __be32 data[9]; + int word; + u32 trace_shmem_base; + if (BP_NOMCP(bp)) { + BNX2X_ERR("NO MCP - can not dump\n"); + return; + } + netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n", + (bp->common.bc_ver & 0xff0000) >> 16, + (bp->common.bc_ver & 0xff00) >> 8, + (bp->common.bc_ver & 0xff)); + + if (pci_channel_offline(bp->pdev)) { + BNX2X_ERR("Cannot dump MCP info while in PCI error\n"); + return; + } + + val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); + if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) + BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val); + + if (BP_PATH(bp) == 0) + trace_shmem_base = bp->common.shmem_base; + else + trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); + + /* sanity */ + if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE || + trace_shmem_base >= MCPR_SCRATCH_BASE(bp) + + SCRATCH_BUFFER_SIZE(bp)) { + BNX2X_ERR("Unable to dump trace buffer (mark %x)\n", + trace_shmem_base); + return; + } + + addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE; + + /* validate TRCB signature */ + mark = REG_RD(bp, addr); + if (mark != MFW_TRACE_SIGNATURE) { + BNX2X_ERR("Trace buffer signature is missing."); + return ; + } + + /* read cyclic buffer pointer */ + addr += 4; + mark = REG_RD(bp, addr); + mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000; + if (mark >= trace_shmem_base || mark < addr + 4) { + BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n"); + return; + } + printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); + + printk("%s", lvl); + + /* dump buffer after the mark */ + for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) { + for (word = 0; word < 8; word++) + data[word] = htonl(REG_RD(bp, offset + 4*word)); + data[8] = 0x0; + pr_cont("%s", (char *)data); + } + + /* dump buffer before the mark */ + for (offset = addr + 4; offset <= mark; offset += 0x8*4) { + for (word = 0; word < 8; word++) + data[word] = htonl(REG_RD(bp, offset + 4*word)); + data[8] = 0x0; + pr_cont("%s", (char *)data); + } + printk("%s" "end of fw dump\n", lvl); +} + +static void bnx2x_fw_dump(struct bnx2x *bp) +{ + bnx2x_fw_dump_lvl(bp, KERN_ERR); +} + +static void bnx2x_hc_int_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + + /* in E1 we must use only PCI configuration space to disable + * MSI/MSIX capability + * It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC block + */ + if (CHIP_IS_E1(bp)) { + /* Since IGU_PF_CONF_MSI_MSIX_EN still always on + * Use mask register to prevent from HC sending interrupts + * after we exit the function + */ + REG_WR(bp, HC_REG_INT_MASK + port*4, 0); + + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + DP(NETIF_MSG_IFDOWN, + "write %x to HC %d (addr 0x%x)\n", + val, port, addr); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, addr, val); + if (REG_RD(bp, addr) != val) + BNX2X_ERR("BUG! Proper val not read from IGU!\n"); +} + +static void bnx2x_igu_int_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + val &= ~(IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN); + + DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) + BNX2X_ERR("BUG! Proper val not read from IGU!\n"); +} + +static void bnx2x_int_disable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_disable(bp); + else + bnx2x_igu_int_disable(bp); +} + +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int) +{ + int i; + u16 j; + struct hc_sp_status_block_data sp_sb_data; + int func = BP_FUNC(bp); +#ifdef BNX2X_STOP_ON_ERROR + u16 start = 0, end = 0; + u8 cos; +#endif + if (IS_PF(bp) && disable_int) + bnx2x_int_disable(bp); + + bp->stats_state = STATS_STATE_DISABLED; + bp->eth_stats.unrecoverable_error++; + DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n"); + + BNX2X_ERR("begin crash dump -----------------\n"); + + /* Indices */ + /* Common */ + if (IS_PF(bp)) { + struct host_sp_status_block *def_sb = bp->def_status_blk; + int data_size, cstorm_offset; + + BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x) spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n", + bp->def_idx, bp->def_att_idx, bp->attn_state, + bp->spq_prod_idx, bp->stats_counter); + BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n", + def_sb->atten_status_block.attn_bits, + def_sb->atten_status_block.attn_bits_ack, + def_sb->atten_status_block.status_block_id, + def_sb->atten_status_block.attn_bits_index); + BNX2X_ERR(" def ("); + for (i = 0; i < HC_SP_SB_MAX_INDICES; i++) + pr_cont("0x%x%s", + def_sb->sp_sb.index_values[i], + (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " "); + + data_size = sizeof(struct hc_sp_status_block_data) / + sizeof(u32); + cstorm_offset = CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func); + for (i = 0; i < data_size; i++) + *((u32 *)&sp_sb_data + i) = + REG_RD(bp, BAR_CSTRORM_INTMEM + cstorm_offset + + i * sizeof(u32)); + + pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n", + sp_sb_data.igu_sb_id, + sp_sb_data.igu_seg_id, + sp_sb_data.p_func.pf_id, + sp_sb_data.p_func.vnic_id, + sp_sb_data.p_func.vf_id, + sp_sb_data.p_func.vf_valid, + sp_sb_data.state); + } + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int loop; + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + struct hc_status_block_sm *hc_sm_p = + CHIP_IS_E1x(bp) ? + sb_data_e1x.common.state_machine : + sb_data_e2.common.state_machine; + struct hc_index_data *hc_index_p = + CHIP_IS_E1x(bp) ? + sb_data_e1x.index_data : + sb_data_e2.index_data; + u8 data_size, cos; + u32 *sb_data_p; + struct bnx2x_fp_txdata txdata; + + if (!bp->fp) + break; + + if (!fp->rx_cons_sb) + continue; + + /* Rx */ + BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x) rx_comp_prod(0x%x) rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n", + i, fp->rx_bd_prod, fp->rx_bd_cons, + fp->rx_comp_prod, + fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb)); + BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x) fp_hc_idx(0x%x)\n", + fp->rx_sge_prod, fp->last_max_sge, + le16_to_cpu(fp->fp_hc_idx)); + + /* Tx */ + for_each_cos_in_tx_queue(fp, cos) + { + if (!fp->txdata_ptr[cos]) + break; + + txdata = *fp->txdata_ptr[cos]; + + if (!txdata.tx_cons_sb) + continue; + + BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x) tx_bd_prod(0x%x) tx_bd_cons(0x%x) *tx_cons_sb(0x%x)\n", + i, txdata.tx_pkt_prod, + txdata.tx_pkt_cons, txdata.tx_bd_prod, + txdata.tx_bd_cons, + le16_to_cpu(*txdata.tx_cons_sb)); + } + + loop = CHIP_IS_E1x(bp) ? + HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2; + + /* host sb data */ + + if (IS_FCOE_FP(fp)) + continue; + + BNX2X_ERR(" run indexes ("); + for (j = 0; j < HC_SB_MAX_SM; j++) + pr_cont("0x%x%s", + fp->sb_running_index[j], + (j == HC_SB_MAX_SM - 1) ? ")" : " "); + + BNX2X_ERR(" indexes ("); + for (j = 0; j < loop; j++) + pr_cont("0x%x%s", + fp->sb_index_values[j], + (j == loop - 1) ? ")" : " "); + + /* VF cannot access FW refelection for status block */ + if (IS_VF(bp)) + continue; + + /* fw sb data */ + data_size = CHIP_IS_E1x(bp) ? + sizeof(struct hc_status_block_data_e1x) : + sizeof(struct hc_status_block_data_e2); + data_size /= sizeof(u32); + sb_data_p = CHIP_IS_E1x(bp) ? + (u32 *)&sb_data_e1x : + (u32 *)&sb_data_e2; + /* copy sb data in here */ + for (j = 0; j < data_size; j++) + *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) + + j * sizeof(u32)); + + if (!CHIP_IS_E1x(bp)) { + pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", + sb_data_e2.common.p_func.pf_id, + sb_data_e2.common.p_func.vf_id, + sb_data_e2.common.p_func.vf_valid, + sb_data_e2.common.p_func.vnic_id, + sb_data_e2.common.same_igu_sb_1b, + sb_data_e2.common.state); + } else { + pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) vnic_id(0x%x) same_igu_sb_1b(0x%x) state(0x%x)\n", + sb_data_e1x.common.p_func.pf_id, + sb_data_e1x.common.p_func.vf_id, + sb_data_e1x.common.p_func.vf_valid, + sb_data_e1x.common.p_func.vnic_id, + sb_data_e1x.common.same_igu_sb_1b, + sb_data_e1x.common.state); + } + + /* SB_SMs data */ + for (j = 0; j < HC_SB_MAX_SM; j++) { + pr_cont("SM[%d] __flags (0x%x) igu_sb_id (0x%x) igu_seg_id(0x%x) time_to_expire (0x%x) timer_value(0x%x)\n", + j, hc_sm_p[j].__flags, + hc_sm_p[j].igu_sb_id, + hc_sm_p[j].igu_seg_id, + hc_sm_p[j].time_to_expire, + hc_sm_p[j].timer_value); + } + + /* Indices data */ + for (j = 0; j < loop; j++) { + pr_cont("INDEX[%d] flags (0x%x) timeout (0x%x)\n", j, + hc_index_p[j].flags, + hc_index_p[j].timeout); + } + } + +#ifdef BNX2X_STOP_ON_ERROR + if (IS_PF(bp)) { + /* event queue */ + BNX2X_ERR("eq cons %x prod %x\n", bp->eq_cons, bp->eq_prod); + for (i = 0; i < NUM_EQ_DESC; i++) { + u32 *data = (u32 *)&bp->eq_ring[i].message.data; + + BNX2X_ERR("event queue [%d]: header: opcode %d, error %d\n", + i, bp->eq_ring[i].message.opcode, + bp->eq_ring[i].message.error); + BNX2X_ERR("data: %x %x %x\n", + data[0], data[1], data[2]); + } + } + + /* Rings */ + /* Rx */ + for_each_valid_rx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + if (!bp->fp) + break; + + if (!fp->rx_cons_sb) + continue; + + start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10); + end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503); + for (j = start; j != end; j = RX_BD(j + 1)) { + u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j]; + struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j]; + + BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n", + i, j, rx_bd[1], rx_bd[0], sw_bd->data); + } + + start = RX_SGE(fp->rx_sge_prod); + end = RX_SGE(fp->last_max_sge); + for (j = start; j != end; j = RX_SGE(j + 1)) { + u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j]; + struct sw_rx_page *sw_page = &fp->rx_page_ring[j]; + + BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n", + i, j, rx_sge[1], rx_sge[0], sw_page->page); + } + + start = RCQ_BD(fp->rx_comp_cons - 10); + end = RCQ_BD(fp->rx_comp_cons + 503); + for (j = start; j != end; j = RCQ_BD(j + 1)) { + u32 *cqe = (u32 *)&fp->rx_comp_ring[j]; + + BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n", + i, j, cqe[0], cqe[1], cqe[2], cqe[3]); + } + } + + /* Tx */ + for_each_valid_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + if (!bp->fp) + break; + + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos]; + + if (!fp->txdata_ptr[cos]) + break; + + if (!txdata->tx_cons_sb) + continue; + + start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10); + end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245); + for (j = start; j != end; j = TX_BD(j + 1)) { + struct sw_tx_bd *sw_bd = + &txdata->tx_buf_ring[j]; + + BNX2X_ERR("fp%d: txdata %d, packet[%x]=[%p,%x]\n", + i, cos, j, sw_bd->skb, + sw_bd->first_bd); + } + + start = TX_BD(txdata->tx_bd_cons - 10); + end = TX_BD(txdata->tx_bd_cons + 254); + for (j = start; j != end; j = TX_BD(j + 1)) { + u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j]; + + BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=[%x:%x:%x:%x]\n", + i, cos, j, tx_bd[0], tx_bd[1], + tx_bd[2], tx_bd[3]); + } + } + } +#endif + if (IS_PF(bp)) { + bnx2x_fw_dump(bp); + bnx2x_mc_assert(bp); + } + BNX2X_ERR("end crash dump -----------------\n"); +} + +/* + * FLR Support for E2 + * + * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW + * initialization. + */ +#define FLR_WAIT_USEC 10000 /* 10 milliseconds */ +#define FLR_WAIT_INTERVAL 50 /* usec */ +#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */ + +struct pbf_pN_buf_regs { + int pN; + u32 init_crd; + u32 crd; + u32 crd_freed; +}; + +struct pbf_pN_cmd_regs { + int pN; + u32 lines_occup; + u32 lines_freed; +}; + +static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, + struct pbf_pN_buf_regs *regs, + u32 poll_count) +{ + u32 init_crd, crd, crd_start, crd_freed, crd_freed_start; + u32 cur_cnt = poll_count; + + crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed); + crd = crd_start = REG_RD(bp, regs->crd); + init_crd = REG_RD(bp, regs->init_crd); + + DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd); + DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd); + DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed); + + while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) < + (init_crd - crd_start))) { + if (cur_cnt--) { + udelay(FLR_WAIT_INTERVAL); + crd = REG_RD(bp, regs->crd); + crd_freed = REG_RD(bp, regs->crd_freed); + } else { + DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n", + regs->pN); + DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n", + regs->pN, crd); + DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n", + regs->pN, crd_freed); + break; + } + } + DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n", + poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); +} + +static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, + struct pbf_pN_cmd_regs *regs, + u32 poll_count) +{ + u32 occup, to_free, freed, freed_start; + u32 cur_cnt = poll_count; + + occup = to_free = REG_RD(bp, regs->lines_occup); + freed = freed_start = REG_RD(bp, regs->lines_freed); + + DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup); + DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed); + + while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) { + if (cur_cnt--) { + udelay(FLR_WAIT_INTERVAL); + occup = REG_RD(bp, regs->lines_occup); + freed = REG_RD(bp, regs->lines_freed); + } else { + DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n", + regs->pN); + DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", + regs->pN, occup); + DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", + regs->pN, freed); + break; + } + } + DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n", + poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); +} + +static u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, + u32 expected, u32 poll_count) +{ + u32 cur_cnt = poll_count; + u32 val; + + while ((val = REG_RD(bp, reg)) != expected && cur_cnt--) + udelay(FLR_WAIT_INTERVAL); + + return val; +} + +int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt) +{ + u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt); + if (val != 0) { + BNX2X_ERR("%s usage count=%d\n", msg, val); + return 1; + } + return 0; +} + +/* Common routines with VF FLR cleanup */ +u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) +{ + /* adjust polling timeout */ + if (CHIP_REV_IS_EMUL(bp)) + return FLR_POLL_CNT * 2000; + + if (CHIP_REV_IS_FPGA(bp)) + return FLR_POLL_CNT * 120; + + return FLR_POLL_CNT; +} + +void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) +{ + struct pbf_pN_cmd_regs cmd_regs[] = { + {0, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_Q0 : + PBF_REG_P0_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_Q0 : + PBF_REG_P0_TQ_LINES_FREED_CNT}, + {1, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_Q1 : + PBF_REG_P1_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_Q1 : + PBF_REG_P1_TQ_LINES_FREED_CNT}, + {4, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_LB_Q : + PBF_REG_P4_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_LB_Q : + PBF_REG_P4_TQ_LINES_FREED_CNT} + }; + + struct pbf_pN_buf_regs buf_regs[] = { + {0, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_Q0 : + PBF_REG_P0_INIT_CRD , + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_Q0 : + PBF_REG_P0_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 : + PBF_REG_P0_INTERNAL_CRD_FREED_CNT}, + {1, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_Q1 : + PBF_REG_P1_INIT_CRD, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_Q1 : + PBF_REG_P1_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 : + PBF_REG_P1_INTERNAL_CRD_FREED_CNT}, + {4, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_LB_Q : + PBF_REG_P4_INIT_CRD, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_LB_Q : + PBF_REG_P4_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q : + PBF_REG_P4_INTERNAL_CRD_FREED_CNT}, + }; + + int i; + + /* Verify the command queues are flushed P0, P1, P4 */ + for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) + bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count); + + /* Verify the transmission buffers are flushed P0, P1, P4 */ + for (i = 0; i < ARRAY_SIZE(buf_regs); i++) + bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count); +} + +#define OP_GEN_PARAM(param) \ + (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM) + +#define OP_GEN_TYPE(type) \ + (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE) + +#define OP_GEN_AGG_VECT(index) \ + (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX) + +int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt) +{ + u32 op_gen_command = 0; + u32 comp_addr = BAR_CSTRORM_INTMEM + + CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func); + int ret = 0; + + if (REG_RD(bp, comp_addr)) { + BNX2X_ERR("Cleanup complete was not 0 before sending\n"); + return 1; + } + + op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); + op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); + op_gen_command |= OP_GEN_AGG_VECT(clnup_func); + op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; + + DP(BNX2X_MSG_SP, "sending FW Final cleanup\n"); + REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen_command); + + if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { + BNX2X_ERR("FW final cleanup did not succeed\n"); + DP(BNX2X_MSG_SP, "At timeout completion address contained %x\n", + (REG_RD(bp, comp_addr))); + bnx2x_panic(); + return 1; + } + /* Zero completion for next FLR */ + REG_WR(bp, comp_addr, 0); + + return ret; +} + +u8 bnx2x_is_pcie_pending(struct pci_dev *dev) +{ + u16 status; + + pcie_capability_read_word(dev, PCI_EXP_DEVSTA, &status); + return status & PCI_EXP_DEVSTA_TRPND; +} + +/* PF FLR specific routines +*/ +static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt) +{ + /* wait for CFC PF usage-counter to zero (includes all the VFs) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + CFC_REG_NUM_LCIDS_INSIDE_PF, + "CFC PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + DORQ_REG_PF_USAGE_CNT, + "DQ PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for QM PF usage-counter to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp), + "QM PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp), + "Timers VNIC usage counter timed out", + poll_cnt)) + return 1; + if (bnx2x_flr_clnup_poll_hw_counter(bp, + TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp), + "Timers NUM_SCANS usage counter timed out", + poll_cnt)) + return 1; + + /* Wait DMAE PF usage counter to zero */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + dmae_reg_go_c[INIT_DMAE_C(bp)], + "DMAE command register timed out", + poll_cnt)) + return 1; + + return 0; +} + +static void bnx2x_hw_enable_status(struct bnx2x *bp) +{ + u32 val; + + val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF); + DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val); + + val = REG_RD(bp, PBF_REG_DISABLE_PF); + DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n", + val); +} + +static int bnx2x_pf_flr_clnup(struct bnx2x *bp) +{ + u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); + + DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp)); + + /* Re-enable PF target read access */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + + /* Poll HW usage counters */ + DP(BNX2X_MSG_SP, "Polling usage counters\n"); + if (bnx2x_poll_hw_usage_counters(bp, poll_cnt)) + return -EBUSY; + + /* Zero the igu 'trailing edge' and 'leading edge' */ + + /* Send the FW cleanup command */ + if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt)) + return -EBUSY; + + /* ATC cleanup */ + + /* Verify TX hw is flushed */ + bnx2x_tx_hw_flushed(bp, poll_cnt); + + /* Wait 100ms (not adjusted according to platform) */ + msleep(100); + + /* Verify no pending pci transactions */ + if (bnx2x_is_pcie_pending(bp->pdev)) + BNX2X_ERR("PCIE Transactions still pending\n"); + + /* Debug */ + bnx2x_hw_enable_status(bp); + + /* + * Master enable - Due to WB DMAE writes performed before this + * register is re-initialized as part of the regular function init + */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + + return 0; +} + +static void bnx2x_hc_int_enable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; + bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; + bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; + + if (msix) { + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0); + val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + if (single_msix) + val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0; + } else if (msi) { + val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0; + val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else { + val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + if (!CHIP_IS_E1(bp)) { + DP(NETIF_MSG_IFUP, + "write %x to HC %d (addr 0x%x)\n", val, port, addr); + + REG_WR(bp, addr, val); + + val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; + } + } + + if (CHIP_IS_E1(bp)) + REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF); + + DP(NETIF_MSG_IFUP, + "write %x to HC %d (addr 0x%x) mode %s\n", val, port, addr, + (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); + + REG_WR(bp, addr, val); + /* + * Ensure that HC_CONFIG is written before leading/trailing edge config + */ + mmiowb(); + barrier(); + + if (!CHIP_IS_E1(bp)) { + /* init leading/trailing edge */ + if (IS_MF(bp)) { + val = (0xee0f | (1 << (BP_VN(bp) + 4))); + if (bp->port.pmf) + /* enable nig and gpio3 attention */ + val |= 0x1100; + } else + val = 0xffff; + + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); + } + + /* Make sure that interrupts are indeed enabled from here on */ + mmiowb(); +} + +static void bnx2x_igu_int_enable(struct bnx2x *bp) +{ + u32 val; + bool msix = (bp->flags & USING_MSIX_FLAG) ? true : false; + bool single_msix = (bp->flags & USING_SINGLE_MSIX_FLAG) ? true : false; + bool msi = (bp->flags & USING_MSI_FLAG) ? true : false; + + val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + if (msix) { + val &= ~(IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + val |= (IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_ATTN_BIT_EN); + + if (single_msix) + val |= IGU_PF_CONF_SINGLE_ISR_EN; + } else if (msi) { + val &= ~IGU_PF_CONF_INT_LINE_EN; + val |= (IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_ATTN_BIT_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + } else { + val &= ~IGU_PF_CONF_MSI_MSIX_EN; + val |= (IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + } + + /* Clean previous status - need to configure igu prior to ack*/ + if ((!msix) || single_msix) { + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + bnx2x_ack_int(bp); + } + + val |= IGU_PF_CONF_FUNC_EN; + + DP(NETIF_MSG_IFUP, "write 0x%x to IGU mode %s\n", + val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + + if (val & IGU_PF_CONF_INT_LINE_EN) + pci_intx(bp->pdev, true); + + barrier(); + + /* init leading/trailing edge */ + if (IS_MF(bp)) { + val = (0xee0f | (1 << (BP_VN(bp) + 4))); + if (bp->port.pmf) + /* enable nig and gpio3 attention */ + val |= 0x1100; + } else + val = 0xffff; + + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); + + /* Make sure that interrupts are indeed enabled from here on */ + mmiowb(); +} + +void bnx2x_int_enable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_enable(bp); + else + bnx2x_igu_int_enable(bp); +} + +void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) +{ + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + int i, offset; + + if (disable_hw) + /* prevent the HW from sending interrupts */ + bnx2x_int_disable(bp); + + /* make sure all ISRs are done */ + if (msix) { + synchronize_irq(bp->msix_table[0].vector); + offset = 1; + if (CNIC_SUPPORT(bp)) + offset++; + for_each_eth_queue(bp, i) + synchronize_irq(bp->msix_table[offset++].vector); + } else + synchronize_irq(bp->pdev->irq); + + /* make sure sp_task is not running */ + cancel_delayed_work(&bp->sp_task); + cancel_delayed_work(&bp->period_task); + flush_workqueue(bnx2x_wq); +} + +/* fast path */ + +/* + * General service functions + */ + +/* Return true if succeeded to acquire the lock */ +static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, + "Trying to take a lock on resource %d\n", resource); + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return false; + } + + if (func <= 5) + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + else + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + + /* Try to acquire the lock */ + REG_WR(bp, hw_lock_control_reg + 4, resource_bit); + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) + return true; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, + "Failed to get a lock on resource %d\n", resource); + return false; +} + +/** + * bnx2x_get_leader_lock_resource - get the recovery leader resource id + * + * @bp: driver handle + * + * Returns the recovery leader resource id according to the engine this function + * belongs to. Currently only only 2 engines is supported. + */ +static int bnx2x_get_leader_lock_resource(struct bnx2x *bp) +{ + if (BP_PATH(bp)) + return HW_LOCK_RESOURCE_RECOVERY_LEADER_1; + else + return HW_LOCK_RESOURCE_RECOVERY_LEADER_0; +} + +/** + * bnx2x_trylock_leader_lock- try to acquire a leader lock. + * + * @bp: driver handle + * + * Tries to acquire a leader lock for current engine. + */ +static bool bnx2x_trylock_leader_lock(struct bnx2x *bp) +{ + return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); +} + +static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err); + +/* schedule the sp task and mark that interrupt occurred (runs from ISR) */ +static int bnx2x_schedule_sp_task(struct bnx2x *bp) +{ + /* Set the interrupt occurred bit for the sp-task to recognize it + * must ack the interrupt and transition according to the IGU + * state machine. + */ + atomic_set(&bp->interrupt_occurred, 1); + + /* The sp_task must execute only after this bit + * is set, otherwise we will get out of sync and miss all + * further interrupts. Hence, the barrier. + */ + smp_wmb(); + + /* schedule sp_task to workqueue */ + return queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); +} + +void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) +{ + struct bnx2x *bp = fp->bp; + int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data); + int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data); + enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX; + struct bnx2x_queue_sp_obj *q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + DP(BNX2X_MSG_SP, + "fp %d cid %d got ramrod #%d state is %x type is %d\n", + fp->index, cid, command, bp->state, + rr_cqe->ramrod_cqe.ramrod_type); + + /* If cid is within VF range, replace the slowpath object with the + * one corresponding to this VF + */ + if (cid >= BNX2X_FIRST_VF_CID && + cid < BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS) + bnx2x_iov_set_queue_sp_obj(bp, cid, &q_obj); + + switch (command) { + case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE): + DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid); + drv_cmd = BNX2X_Q_CMD_UPDATE; + break; + + case (RAMROD_CMD_ID_ETH_CLIENT_SETUP): + DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_SETUP; + break; + + case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP): + DP(BNX2X_MSG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; + break; + + case (RAMROD_CMD_ID_ETH_HALT): + DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_HALT; + break; + + case (RAMROD_CMD_ID_ETH_TERMINATE): + DP(BNX2X_MSG_SP, "got MULTI[%d] terminate ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_TERMINATE; + break; + + case (RAMROD_CMD_ID_ETH_EMPTY): + DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_EMPTY; + break; + + case (RAMROD_CMD_ID_ETH_TPA_UPDATE): + DP(BNX2X_MSG_SP, "got tpa update ramrod CID=%d\n", cid); + drv_cmd = BNX2X_Q_CMD_UPDATE_TPA; + break; + + default: + BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n", + command, fp->index); + return; + } + + if ((drv_cmd != BNX2X_Q_CMD_MAX) && + q_obj->complete_cmd(bp, q_obj, drv_cmd)) + /* q_obj->complete_cmd() failure means that this was + * an unexpected completion. + * + * In this case we don't want to increase the bp->spq_left + * because apparently we haven't sent this command the first + * place. + */ +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#else + return; +#endif + + smp_mb__before_atomic(); + atomic_inc(&bp->cq_spq_left); + /* push the change in bp->spq_left and towards the memory */ + smp_mb__after_atomic(); + + DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left)); + + if ((drv_cmd == BNX2X_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) && + (!!test_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state))) { + /* if Q update ramrod is completed for last Q in AFEX vif set + * flow, then ACK MCP at the end + * + * mark pending ACK to MCP bit. + * prevent case that both bits are cleared. + * At the end of load/unload driver checks that + * sp_state is cleared, and this order prevents + * races + */ + smp_mb__before_atomic(); + set_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, &bp->sp_state); + wmb(); + clear_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); + smp_mb__after_atomic(); + + /* schedule the sp task as mcp ack is required */ + bnx2x_schedule_sp_task(bp); + } + + return; +} + +irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) +{ + struct bnx2x *bp = netdev_priv(dev_instance); + u16 status = bnx2x_ack_int(bp); + u16 mask; + int i; + u8 cos; + + /* Return here if interrupt is shared and it's not for us */ + if (unlikely(status == 0)) { + DP(NETIF_MSG_INTR, "not our interrupt!\n"); + return IRQ_NONE; + } + DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + mask = 0x2 << (fp->index + CNIC_SUPPORT(bp)); + if (status & mask) { + /* Handle Rx or Tx according to SB id */ + for_each_cos_in_tx_queue(fp, cos) + prefetch(fp->txdata_ptr[cos]->tx_cons_sb); + prefetch(&fp->sb_running_index[SM_RX_ID]); + napi_schedule_irqoff(&bnx2x_fp(bp, fp->index, napi)); + status &= ~mask; + } + } + + if (CNIC_SUPPORT(bp)) { + mask = 0x2; + if (status & (mask | 0x1)) { + struct cnic_ops *c_ops = NULL; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops && (bp->cnic_eth_dev.drv_state & + CNIC_DRV_STATE_HANDLES_IRQ)) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); + + status &= ~mask; + } + } + + if (unlikely(status & 0x1)) { + + /* schedule sp task to perform default status block work, ack + * attentions and enable interrupts. + */ + bnx2x_schedule_sp_task(bp); + + status &= ~0x1; + if (!status) + return IRQ_HANDLED; + } + + if (unlikely(status)) + DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n", + status); + + return IRQ_HANDLED; +} + +/* Link */ + +/* + * General service functions + */ + +int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + int cnt; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + if (func <= 5) { + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + } else { + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + } + + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) { + BNX2X_ERR("lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } + + /* Try for 5 second every 5ms */ + for (cnt = 0; cnt < 1000; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, hw_lock_control_reg + 4, resource_bit); + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) + return 0; + + usleep_range(5000, 10000); + } + BNX2X_ERR("Timeout\n"); + return -EAGAIN; +} + +int bnx2x_release_leader_lock(struct bnx2x *bp) +{ + return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); +} + +int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + BNX2X_ERR("resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + if (func <= 5) { + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + } else { + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, hw_lock_control_reg); + if (!(lock_status & resource_bit)) { + BNX2X_ERR("lock_status 0x%x resource_bit 0x%x. Unlock was called but lock wasn't taken!\n", + lock_status, resource_bit); + return -EFAULT; + } + + REG_WR(bp, hw_lock_control_reg, resource_bit); + return 0; +} + +int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + int value; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + /* read GPIO value */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO); + + /* get the requested pin value */ + if ((gpio_reg & gpio_mask) == gpio_mask) + value = 1; + else + value = 0; + + return value; +} + +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, + "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, + "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, + "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode) +{ + u32 gpio_reg = 0; + int rc = 0; + + /* Any port swapping should be handled by caller. */ + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins); + /* set CLR */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins); + /* set SET */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins); + /* set FLOAT */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode); + rc = -EINVAL; + break; + } + + if (rc == 0) + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return rc; +} + +int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO int */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT); + + switch (mode) { + case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR: + DP(NETIF_MSG_LINK, + "Clear GPIO INT %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear SET and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_INT_OUTPUT_SET: + DP(NETIF_MSG_LINK, + "Set GPIO INT %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear CLR and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode) +{ + u32 spio_reg; + + /* Only 2 SPIOs are configurable */ + if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) { + BNX2X_ERR("Invalid SPIO 0x%x\n", spio); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_SPIO_FLOAT); + + switch (mode) { + case MISC_SPIO_OUTPUT_LOW: + DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output low\n", spio); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); + spio_reg |= (spio << MISC_SPIO_CLR_POS); + break; + + case MISC_SPIO_OUTPUT_HIGH: + DP(NETIF_MSG_HW, "Set SPIO 0x%x -> output high\n", spio); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS); + spio_reg |= (spio << MISC_SPIO_SET_POS); + break; + + case MISC_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_HW, "Set SPIO 0x%x -> input\n", spio); + /* set FLOAT */ + spio_reg |= (spio << MISC_SPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + + return 0; +} + +void bnx2x_calc_fc_adv(struct bnx2x *bp) +{ + u8 cfg_idx = bnx2x_get_link_cfg_idx(bp); + + bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + switch (bp->link_vars.ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) { + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: + bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC: + bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause; + break; + + default: + break; + } +} + +static void bnx2x_set_requested_fc(struct bnx2x *bp) +{ + /* Initialize link parameters structure variables + * It is recommended to turn off RX FC for jumbo frames + * for better performance + */ + if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000)) + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; + else + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; +} + +static void bnx2x_init_dropless_fc(struct bnx2x *bp) +{ + u32 pause_enabled = 0; + + if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) { + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) + pause_enabled = 1; + + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)), + pause_enabled); + } + + DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n", + pause_enabled ? "enabled" : "disabled"); +} + +int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) +{ + int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp); + u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx]; + + if (!BP_NOMCP(bp)) { + bnx2x_set_requested_fc(bp); + bnx2x_acquire_phy_lock(bp); + + if (load_mode == LOAD_DIAG) { + struct link_params *lp = &bp->link_params; + lp->loopback_mode = LOOPBACK_XGXS; + /* Prefer doing PHY loopback at highest speed */ + if (lp->req_line_speed[cfx_idx] < SPEED_20000) { + if (lp->speed_cap_mask[cfx_idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_20G) + lp->req_line_speed[cfx_idx] = + SPEED_20000; + else if (lp->speed_cap_mask[cfx_idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + lp->req_line_speed[cfx_idx] = + SPEED_10000; + else + lp->req_line_speed[cfx_idx] = + SPEED_1000; + } + } + + if (load_mode == LOAD_LOOPBACK_EXT) { + struct link_params *lp = &bp->link_params; + lp->loopback_mode = LOOPBACK_EXT; + } + + rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); + + bnx2x_release_phy_lock(bp); + + bnx2x_init_dropless_fc(bp); + + bnx2x_calc_fc_adv(bp); + + if (bp->link_vars.link_up) { + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + bnx2x_link_report(bp); + } + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + bp->link_params.req_line_speed[cfx_idx] = req_line_speed; + return rc; + } + BNX2X_ERR("Bootcode is missing - can not initialize link\n"); + return -EINVAL; +} + +void bnx2x_link_set(struct bnx2x *bp) +{ + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_phy_init(&bp->link_params, &bp->link_vars); + bnx2x_release_phy_lock(bp); + + bnx2x_init_dropless_fc(bp); + + bnx2x_calc_fc_adv(bp); + } else + BNX2X_ERR("Bootcode is missing - can not set link\n"); +} + +static void bnx2x__link_reset(struct bnx2x *bp) +{ + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_lfa_reset(&bp->link_params, &bp->link_vars); + bnx2x_release_phy_lock(bp); + } else + BNX2X_ERR("Bootcode is missing - can not reset link\n"); +} + +void bnx2x_force_link_reset(struct bnx2x *bp) +{ + bnx2x_acquire_phy_lock(bp); + bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); + bnx2x_release_phy_lock(bp); +} + +u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes) +{ + u8 rc = 0; + + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_test_link(&bp->link_params, &bp->link_vars, + is_serdes); + bnx2x_release_phy_lock(bp); + } else + BNX2X_ERR("Bootcode is missing - can not test link\n"); + + return rc; +} + +/* Calculates the sum of vn_min_rates. + It's needed for further normalizing of the min_rates. + Returns: + sum of vn_min_rates. + or + 0 - if all the min_rates are 0. + In the later case fairness algorithm should be deactivated. + If not all min_rates are zero then those that are zeroes will be set to 1. + */ +static void bnx2x_calc_vn_min(struct bnx2x *bp, + struct cmng_init_input *input) +{ + int all_zero = 1; + int vn; + + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + u32 vn_cfg = bp->mf_config[vn]; + u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> + FUNC_MF_CFG_MIN_BW_SHIFT) * 100; + + /* Skip hidden vns */ + if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) + vn_min_rate = 0; + /* If min rate is zero - set it to 1 */ + else if (!vn_min_rate) + vn_min_rate = DEF_MIN_RATE; + else + all_zero = 0; + + input->vnic_min_rate[vn] = vn_min_rate; + } + + /* if ETS or all min rates are zeros - disable fairness */ + if (BNX2X_IS_ETS_ENABLED(bp)) { + input->flags.cmng_enables &= + ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; + DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n"); + } else if (all_zero) { + input->flags.cmng_enables &= + ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; + DP(NETIF_MSG_IFUP, + "All MIN values are zeroes fairness will be disabled\n"); + } else + input->flags.cmng_enables |= + CMNG_FLAGS_PER_PORT_FAIRNESS_VN; +} + +static void bnx2x_calc_vn_max(struct bnx2x *bp, int vn, + struct cmng_init_input *input) +{ + u16 vn_max_rate; + u32 vn_cfg = bp->mf_config[vn]; + + if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) + vn_max_rate = 0; + else { + u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg); + + if (IS_MF_PERCENT_BW(bp)) { + /* maxCfg in percents of linkspeed */ + vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100; + } else /* SD modes */ + /* maxCfg is absolute in 100Mb units */ + vn_max_rate = maxCfg * 100; + } + + DP(NETIF_MSG_IFUP, "vn %d: vn_max_rate %d\n", vn, vn_max_rate); + + input->vnic_max_rate[vn] = vn_max_rate; +} + +static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp) +{ + if (CHIP_REV_IS_SLOW(bp)) + return CMNG_FNS_NONE; + if (IS_MF(bp)) + return CMNG_FNS_MINMAX; + + return CMNG_FNS_NONE; +} + +void bnx2x_read_mf_cfg(struct bnx2x *bp) +{ + int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1); + + if (BP_NOMCP(bp)) + return; /* what should be the default value in this case */ + + /* For 2 port configuration the absolute function number formula + * is: + * abs_func = 2 * vn + BP_PORT + BP_PATH + * + * and there are 4 functions per port + * + * For 4 port configuration it is + * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH + * + * and there are 2 functions per port + */ + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); + + if (func >= E1H_FUNC_MAX) + break; + + bp->mf_config[vn] = + MF_CFG_RD(bp, func_mf_config[func].config); + } + if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { + DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n"); + bp->flags |= MF_FUNC_DIS; + } else { + DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n"); + bp->flags &= ~MF_FUNC_DIS; + } +} + +static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) +{ + struct cmng_init_input input; + memset(&input, 0, sizeof(struct cmng_init_input)); + + input.port_rate = bp->link_vars.line_speed; + + if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) { + int vn; + + /* read mf conf from shmem */ + if (read_cfg) + bnx2x_read_mf_cfg(bp); + + /* vn_weight_sum and enable fairness if not 0 */ + bnx2x_calc_vn_min(bp, &input); + + /* calculate and set min-max rate for each vn */ + if (bp->port.pmf) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) + bnx2x_calc_vn_max(bp, vn, &input); + + /* always enable rate shaping and fairness */ + input.flags.cmng_enables |= + CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN; + + bnx2x_init_cmng(&input, &bp->cmng); + return; + } + + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "rate shaping and fairness are disabled\n"); +} + +static void storm_memset_cmng(struct bnx2x *bp, + struct cmng_init *cmng, + u8 port) +{ + int vn; + size_t size = sizeof(struct cmng_struct_per_port); + + u32 addr = BAR_XSTRORM_INTMEM + + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port); + + __storm_memset_struct(bp, addr, size, (u32 *)&cmng->port); + + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + int func = func_by_vn(bp, vn); + + addr = BAR_XSTRORM_INTMEM + + XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func); + size = sizeof(struct rate_shaping_vars_per_vn); + __storm_memset_struct(bp, addr, size, + (u32 *)&cmng->vnic.vnic_max_rate[vn]); + + addr = BAR_XSTRORM_INTMEM + + XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func); + size = sizeof(struct fairness_vars_per_vn); + __storm_memset_struct(bp, addr, size, + (u32 *)&cmng->vnic.vnic_min_rate[vn]); + } +} + +/* init cmng mode in HW according to local configuration */ +void bnx2x_set_local_cmng(struct bnx2x *bp) +{ + int cmng_fns = bnx2x_get_cmng_fns_mode(bp); + + if (cmng_fns != CMNG_FNS_NONE) { + bnx2x_cmng_fns_init(bp, false, cmng_fns); + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + } else { + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "single function mode without fairness\n"); + } +} + +/* This function is called upon link interrupt */ +static void bnx2x_link_attn(struct bnx2x *bp) +{ + /* Make sure that we are synced with the current statistics */ + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + bnx2x_link_update(&bp->link_params, &bp->link_vars); + + bnx2x_init_dropless_fc(bp); + + if (bp->link_vars.link_up) { + + if (bp->link_vars.mac_type != MAC_TYPE_EMAC) { + struct host_port_stats *pstats; + + pstats = bnx2x_sp(bp, port_stats); + /* reset old mac stats */ + memset(&(pstats->mac_stx[0]), 0, + sizeof(struct mac_stx)); + } + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + } + + if (bp->link_vars.link_up && bp->link_vars.line_speed) + bnx2x_set_local_cmng(bp); + + __bnx2x_link_report(bp); + + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); +} + +void bnx2x__link_status_update(struct bnx2x *bp) +{ + if (bp->state != BNX2X_STATE_OPEN) + return; + + /* read updated dcb configuration */ + if (IS_PF(bp)) { + bnx2x_dcbx_pmf_update(bp); + bnx2x_link_status_update(&bp->link_params, &bp->link_vars); + if (bp->link_vars.link_up) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + else + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* indicate link status */ + bnx2x_link_report(bp); + + } else { /* VF */ + bp->port.supported[0] |= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_2500baseX_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + bp->port.advertising[0] = bp->port.supported[0]; + + bp->link_params.bp = bp; + bp->link_params.port = BP_PORT(bp); + bp->link_params.req_duplex[0] = DUPLEX_FULL; + bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE; + bp->link_params.req_line_speed[0] = SPEED_10000; + bp->link_params.speed_cap_mask[0] = 0x7f0000; + bp->link_params.switch_cfg = SWITCH_CFG_10G; + bp->link_vars.mac_type = MAC_TYPE_BMAC; + bp->link_vars.line_speed = SPEED_10000; + bp->link_vars.link_status = + (LINK_STATUS_LINK_UP | + LINK_STATUS_SPEED_AND_DUPLEX_10GTFD); + bp->link_vars.link_up = 1; + bp->link_vars.duplex = DUPLEX_FULL; + bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE; + __bnx2x_link_report(bp); + + bnx2x_sample_bulletin(bp); + + /* if bulletin board did not have an update for link status + * __bnx2x_link_report will report current status + * but it will NOT duplicate report in case of already reported + * during sampling bulletin board. + */ + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + } +} + +static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid, + u16 vlan_val, u8 allowed_prio) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_afex_update_params *f_update_params = + &func_params.params.afex_update; + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_AFEX_UPDATE; + + /* no need to wait for RAMROD completion, so don't + * set RAMROD_COMP_WAIT flag + */ + + f_update_params->vif_id = vifid; + f_update_params->afex_default_vlan = vlan_val; + f_update_params->allowed_priorities = allowed_prio; + + /* if ramrod can not be sent, response to MCP immediately */ + if (bnx2x_func_state_change(bp, &func_params) < 0) + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); + + return 0; +} + +static int bnx2x_afex_handle_vif_list_cmd(struct bnx2x *bp, u8 cmd_type, + u16 vif_index, u8 func_bit_map) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_afex_viflists_params *update_params = + &func_params.params.afex_viflists; + int rc; + u32 drv_msg_code; + + /* validate only LIST_SET and LIST_GET are received from switch */ + if ((cmd_type != VIF_LIST_RULE_GET) && (cmd_type != VIF_LIST_RULE_SET)) + BNX2X_ERR("BUG! afex_handle_vif_list_cmd invalid type 0x%x\n", + cmd_type); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_AFEX_VIFLISTS; + + /* set parameters according to cmd_type */ + update_params->afex_vif_list_command = cmd_type; + update_params->vif_list_index = vif_index; + update_params->func_bit_map = + (cmd_type == VIF_LIST_RULE_GET) ? 0 : func_bit_map; + update_params->func_to_clear = 0; + drv_msg_code = + (cmd_type == VIF_LIST_RULE_GET) ? + DRV_MSG_CODE_AFEX_LISTGET_ACK : + DRV_MSG_CODE_AFEX_LISTSET_ACK; + + /* if ramrod can not be sent, respond to MCP immediately for + * SET and GET requests (other are not triggered from MCP) + */ + rc = bnx2x_func_state_change(bp, &func_params); + if (rc < 0) + bnx2x_fw_command(bp, drv_msg_code, 0); + + return 0; +} + +static void bnx2x_handle_afex_cmd(struct bnx2x *bp, u32 cmd) +{ + struct afex_stats afex_stats; + u32 func = BP_ABS_FUNC(bp); + u32 mf_config; + u16 vlan_val; + u32 vlan_prio; + u16 vif_id; + u8 allowed_prio; + u8 vlan_mode; + u32 addr_to_write, vifid, addrs, stats_type, i; + + if (cmd & DRV_STATUS_AFEX_LISTGET_REQ) { + vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); + DP(BNX2X_MSG_MCP, + "afex: got MCP req LISTGET_REQ for vifid 0x%x\n", vifid); + bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_GET, vifid, 0); + } + + if (cmd & DRV_STATUS_AFEX_LISTSET_REQ) { + vifid = SHMEM2_RD(bp, afex_param1_to_driver[BP_FW_MB_IDX(bp)]); + addrs = SHMEM2_RD(bp, afex_param2_to_driver[BP_FW_MB_IDX(bp)]); + DP(BNX2X_MSG_MCP, + "afex: got MCP req LISTSET_REQ for vifid 0x%x addrs 0x%x\n", + vifid, addrs); + bnx2x_afex_handle_vif_list_cmd(bp, VIF_LIST_RULE_SET, vifid, + addrs); + } + + if (cmd & DRV_STATUS_AFEX_STATSGET_REQ) { + addr_to_write = SHMEM2_RD(bp, + afex_scratchpad_addr_to_write[BP_FW_MB_IDX(bp)]); + stats_type = SHMEM2_RD(bp, + afex_param1_to_driver[BP_FW_MB_IDX(bp)]); + + DP(BNX2X_MSG_MCP, + "afex: got MCP req STATSGET_REQ, write to addr 0x%x\n", + addr_to_write); + + bnx2x_afex_collect_stats(bp, (void *)&afex_stats, stats_type); + + /* write response to scratchpad, for MCP */ + for (i = 0; i < (sizeof(struct afex_stats)/sizeof(u32)); i++) + REG_WR(bp, addr_to_write + i*sizeof(u32), + *(((u32 *)(&afex_stats))+i)); + + /* send ack message to MCP */ + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_STATSGET_ACK, 0); + } + + if (cmd & DRV_STATUS_AFEX_VIFSET_REQ) { + mf_config = MF_CFG_RD(bp, func_mf_config[func].config); + bp->mf_config[BP_VN(bp)] = mf_config; + DP(BNX2X_MSG_MCP, + "afex: got MCP req VIFSET_REQ, mf_config 0x%x\n", + mf_config); + + /* if VIF_SET is "enabled" */ + if (!(mf_config & FUNC_MF_CFG_FUNC_DISABLED)) { + /* set rate limit directly to internal RAM */ + struct cmng_init_input cmng_input; + struct rate_shaping_vars_per_vn m_rs_vn; + size_t size = sizeof(struct rate_shaping_vars_per_vn); + u32 addr = BAR_XSTRORM_INTMEM + + XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(BP_FUNC(bp)); + + bp->mf_config[BP_VN(bp)] = mf_config; + + bnx2x_calc_vn_max(bp, BP_VN(bp), &cmng_input); + m_rs_vn.vn_counter.rate = + cmng_input.vnic_max_rate[BP_VN(bp)]; + m_rs_vn.vn_counter.quota = + (m_rs_vn.vn_counter.rate * + RS_PERIODIC_TIMEOUT_USEC) / 8; + + __storm_memset_struct(bp, addr, size, (u32 *)&m_rs_vn); + + /* read relevant values from mf_cfg struct in shmem */ + vif_id = + (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK) >> + FUNC_MF_CFG_E1HOV_TAG_SHIFT; + vlan_val = + (MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_AFEX_VLAN_MASK) >> + FUNC_MF_CFG_AFEX_VLAN_SHIFT; + vlan_prio = (mf_config & + FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >> + FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT; + vlan_val |= (vlan_prio << VLAN_PRIO_SHIFT); + vlan_mode = + (MF_CFG_RD(bp, + func_mf_config[func].afex_config) & + FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >> + FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT; + allowed_prio = + (MF_CFG_RD(bp, + func_mf_config[func].afex_config) & + FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >> + FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT; + + /* send ramrod to FW, return in case of failure */ + if (bnx2x_afex_func_update(bp, vif_id, vlan_val, + allowed_prio)) + return; + + bp->afex_def_vlan_tag = vlan_val; + bp->afex_vlan_mode = vlan_mode; + } else { + /* notify link down because BP->flags is disabled */ + bnx2x_link_report(bp); + + /* send INVALID VIF ramrod to FW */ + bnx2x_afex_func_update(bp, 0xFFFF, 0, 0); + + /* Reset the default afex VLAN */ + bp->afex_def_vlan_tag = -1; + } + } +} + +static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp) +{ + struct bnx2x_func_switch_update_params *switch_update_params; + struct bnx2x_func_state_params func_params; + + memset(&func_params, 0, sizeof(struct bnx2x_func_state_params)); + switch_update_params = &func_params.params.switch_update; + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + if (IS_MF_UFP(bp) || IS_MF_BD(bp)) { + int func = BP_ABS_FUNC(bp); + u32 val; + + /* Re-learn the S-tag from shmem */ + val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK; + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_ov = val; + } else { + BNX2X_ERR("Got an SVID event, but no tag is configured in shmem\n"); + goto fail; + } + + /* Configure new S-tag in LLH */ + REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + BP_PORT(bp) * 8, + bp->mf_ov); + + /* Send Ramrod to update FW of change */ + __set_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, + &switch_update_params->changes); + switch_update_params->vlan = bp->mf_ov; + + if (bnx2x_func_state_change(bp, &func_params) < 0) { + BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n", + bp->mf_ov); + goto fail; + } else { + DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", + bp->mf_ov); + } + } else { + goto fail; + } + + bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0); + return; +fail: + bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0); +} + +static void bnx2x_pmf_update(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 val; + + bp->port.pmf = 1; + DP(BNX2X_MSG_MCP, "pmf %d\n", bp->port.pmf); + + /* + * We need the mb() to ensure the ordering between the writing to + * bp->port.pmf here and reading it from the bnx2x_periodic_task(). + */ + smp_mb(); + + /* queue a periodic task */ + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + + bnx2x_dcbx_pmf_update(bp); + + /* enable nig attention */ + val = (0xff0f | (1 << (BP_VN(bp) + 4))); + if (bp->common.int_block == INT_BLOCK_HC) { + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); + } else if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); + } + + bnx2x_stats_handle(bp, STATS_EVENT_PMF); +} + +/* end of Link */ + +/* slow path */ + +/* + * General service functions + */ + +/* send the MCP a request, block until there is a reply */ +u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param) +{ + int mb_idx = BP_FW_MB_IDX(bp); + u32 seq; + u32 rc = 0; + u32 cnt = 1; + u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10; + + mutex_lock(&bp->fw_mb_mutex); + seq = ++bp->fw_seq; + SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param); + SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq)); + + DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n", + (command | seq), param); + + do { + /* let the FW do it's magic ... */ + msleep(delay); + + rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header); + + /* Give the FW up to 5 second (500*10ms) */ + } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500)); + + DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n", + cnt*delay, rc, seq); + + /* is this a reply to our command? */ + if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) + rc &= FW_MSG_CODE_MASK; + else { + /* FW BUG! */ + BNX2X_ERR("FW failed to respond!\n"); + bnx2x_fw_dump(bp); + rc = 0; + } + mutex_unlock(&bp->fw_mb_mutex); + + return rc; +} + +static void storm_memset_func_cfg(struct bnx2x *bp, + struct tstorm_eth_function_common_config *tcfg, + u16 abs_fid) +{ + size_t size = sizeof(struct tstorm_eth_function_common_config); + + u32 addr = BAR_TSTRORM_INTMEM + + TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid); + + __storm_memset_struct(bp, addr, size, (u32 *)tcfg); +} + +void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p) +{ + if (CHIP_IS_E1x(bp)) { + struct tstorm_eth_function_common_config tcfg = {0}; + + storm_memset_func_cfg(bp, &tcfg, p->func_id); + } + + /* Enable the function in the FW */ + storm_memset_vf_to_pf(bp, p->func_id, p->pf_id); + storm_memset_func_en(bp, p->func_id, 1); + + /* spq */ + if (p->spq_active) { + storm_memset_spq_addr(bp, p->spq_map, p->func_id); + REG_WR(bp, XSEM_REG_FAST_MEMORY + + XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod); + } +} + +/** + * bnx2x_get_common_flags - Return common flags + * + * @bp device handle + * @fp queue handle + * @zero_stats TRUE if statistics zeroing is needed + * + * Return the flags that are common for the Tx-only and not normal connections. + */ +static unsigned long bnx2x_get_common_flags(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + bool zero_stats) +{ + unsigned long flags = 0; + + /* PF driver will always initialize the Queue to an ACTIVE state */ + __set_bit(BNX2X_Q_FLG_ACTIVE, &flags); + + /* tx only connections collect statistics (on the same index as the + * parent connection). The statistics are zeroed when the parent + * connection is initialized. + */ + + __set_bit(BNX2X_Q_FLG_STATS, &flags); + if (zero_stats) + __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags); + + if (bp->flags & TX_SWITCHING) + __set_bit(BNX2X_Q_FLG_TX_SWITCH, &flags); + + __set_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, &flags); + __set_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, &flags); + +#ifdef BNX2X_STOP_ON_ERROR + __set_bit(BNX2X_Q_FLG_TX_SEC, &flags); +#endif + + return flags; +} + +static unsigned long bnx2x_get_q_flags(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + bool leading) +{ + unsigned long flags = 0; + + /* calculate other queue flags */ + if (IS_MF_SD(bp)) + __set_bit(BNX2X_Q_FLG_OV, &flags); + + if (IS_FCOE_FP(fp)) { + __set_bit(BNX2X_Q_FLG_FCOE, &flags); + /* For FCoE - force usage of default priority (for afex) */ + __set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags); + } + + if (fp->mode != TPA_MODE_DISABLED) { + __set_bit(BNX2X_Q_FLG_TPA, &flags); + __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags); + if (fp->mode == TPA_MODE_GRO) + __set_bit(BNX2X_Q_FLG_TPA_GRO, &flags); + } + + if (leading) { + __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags); + __set_bit(BNX2X_Q_FLG_MCAST, &flags); + } + + /* Always set HW VLAN stripping */ + __set_bit(BNX2X_Q_FLG_VLAN, &flags); + + /* configure silent vlan removal */ + if (IS_MF_AFEX(bp)) + __set_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, &flags); + + return flags | bnx2x_get_common_flags(bp, fp, true); +} + +static void bnx2x_pf_q_prep_general(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init, + u8 cos) +{ + gen_init->stat_id = bnx2x_stats_id(fp); + gen_init->spcl_id = fp->cl_id; + + /* Always use mini-jumbo MTU for FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU; + else + gen_init->mtu = bp->dev->mtu; + + gen_init->cos = cos; + + gen_init->fp_hsi = ETH_FP_HSI_VERSION; +} + +static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct rxq_pause_params *pause, + struct bnx2x_rxq_setup_params *rxq_init) +{ + u8 max_sge = 0; + u16 sge_sz = 0; + u16 tpa_agg_size = 0; + + if (fp->mode != TPA_MODE_DISABLED) { + pause->sge_th_lo = SGE_TH_LO(bp); + pause->sge_th_hi = SGE_TH_HI(bp); + + /* validate SGE ring has enough to cross high threshold */ + WARN_ON(bp->dropless_fc && + pause->sge_th_hi + FW_PREFETCH_CNT > + MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); + + tpa_agg_size = TPA_AGG_SIZE; + max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >> + SGE_PAGE_SHIFT; + max_sge = ((max_sge + PAGES_PER_SGE - 1) & + (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; + sge_sz = (u16)min_t(u32, SGE_PAGES, 0xffff); + } + + /* pause - not for e1 */ + if (!CHIP_IS_E1(bp)) { + pause->bd_th_lo = BD_TH_LO(bp); + pause->bd_th_hi = BD_TH_HI(bp); + + pause->rcq_th_lo = RCQ_TH_LO(bp); + pause->rcq_th_hi = RCQ_TH_HI(bp); + /* + * validate that rings have enough entries to cross + * high thresholds + */ + WARN_ON(bp->dropless_fc && + pause->bd_th_hi + FW_PREFETCH_CNT > + bp->rx_ring_size); + WARN_ON(bp->dropless_fc && + pause->rcq_th_hi + FW_PREFETCH_CNT > + NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); + + pause->pri_map = 1; + } + + /* rxq setup */ + rxq_init->dscr_map = fp->rx_desc_mapping; + rxq_init->sge_map = fp->rx_sge_mapping; + rxq_init->rcq_map = fp->rx_comp_mapping; + rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE; + + /* This should be a maximum number of data bytes that may be + * placed on the BD (not including paddings). + */ + rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START - + BNX2X_FW_RX_ALIGN_END - IP_HEADER_ALIGNMENT_PADDING; + + rxq_init->cl_qzone_id = fp->cl_qzone_id; + rxq_init->tpa_agg_sz = tpa_agg_size; + rxq_init->sge_buf_sz = sge_sz; + rxq_init->max_sges_pkt = max_sge; + rxq_init->rss_engine_id = BP_FUNC(bp); + rxq_init->mcast_engine_id = BP_FUNC(bp); + + /* Maximum number or simultaneous TPA aggregation for this Queue. + * + * For PF Clients it should be the maximum available number. + * VF driver(s) may want to define it to a smaller value. + */ + rxq_init->max_tpa_queues = MAX_AGG_QS(bp); + + rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; + rxq_init->fw_sb_id = fp->fw_sb_id; + + if (IS_FCOE_FP(fp)) + rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS; + else + rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; + /* configure silent vlan removal + * if multi function mode is afex, then mask default vlan + */ + if (IS_MF_AFEX(bp)) { + rxq_init->silent_removal_value = bp->afex_def_vlan_tag; + rxq_init->silent_removal_mask = VLAN_VID_MASK; + } +} + +static void bnx2x_pf_tx_q_prep(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init, + u8 cos) +{ + txq_init->dscr_map = fp->txdata_ptr[cos]->tx_desc_mapping; + txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos; + txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW; + txq_init->fw_sb_id = fp->fw_sb_id; + + /* + * set the tss leading client id for TX classification == + * leading RSS client id + */ + txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id); + + if (IS_FCOE_FP(fp)) { + txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS; + txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE; + } +} + +static void bnx2x_pf_init(struct bnx2x *bp) +{ + struct bnx2x_func_init_params func_init = {0}; + struct event_ring_data eq_data = { {0} }; + + if (!CHIP_IS_E1x(bp)) { + /* reset IGU PF statistics: MSIX + ATTN */ + /* PF */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + + BNX2X_IGU_STAS_MSG_VF_CNT*4 + + (CHIP_MODE_IS_4_PORT(bp) ? + BP_FUNC(bp) : BP_VN(bp))*4, 0); + /* ATTN */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + + BNX2X_IGU_STAS_MSG_VF_CNT*4 + + BNX2X_IGU_STAS_MSG_PF_CNT*4 + + (CHIP_MODE_IS_4_PORT(bp) ? + BP_FUNC(bp) : BP_VN(bp))*4, 0); + } + + func_init.spq_active = true; + func_init.pf_id = BP_FUNC(bp); + func_init.func_id = BP_FUNC(bp); + func_init.spq_map = bp->spq_mapping; + func_init.spq_prod = bp->spq_prod_idx; + + bnx2x_func_init(bp, &func_init); + + memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port)); + + /* + * Congestion management values depend on the link rate + * There is no active link so initial link rate is set to 10 Gbps. + * When the link comes up The congestion management values are + * re-calculated according to the actual link rate. + */ + bp->link_vars.line_speed = SPEED_10000; + bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp)); + + /* Only the PMF sets the HW */ + if (bp->port.pmf) + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + + /* init Event Queue - PCI bus guarantees correct endianity*/ + eq_data.base_addr.hi = U64_HI(bp->eq_mapping); + eq_data.base_addr.lo = U64_LO(bp->eq_mapping); + eq_data.producer = bp->eq_prod; + eq_data.index_id = HC_SP_INDEX_EQ_CONS; + eq_data.sb_id = DEF_SB_ID; + storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp)); +} + +static void bnx2x_e1h_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + bnx2x_tx_disable(bp); + + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); +} + +static void bnx2x_e1h_enable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); + + /* Tx queue should be only re-enabled */ + netif_tx_wake_all_queues(bp->dev); + + /* + * Should not call netif_carrier_on since it will be called if the link + * is up when checking for link state + */ +} + +#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3 + +static void bnx2x_drv_info_ether_stat(struct bnx2x *bp) +{ + struct eth_stats_info *ether_stat = + &bp->slowpath->drv_info_to_mcp.ether_stat; + struct bnx2x_vlan_mac_obj *mac_obj = + &bp->sp_objs->mac_obj; + int i; + + strlcpy(ether_stat->version, DRV_MODULE_VERSION, + ETH_STAT_INFO_VERSION_LEN); + + /* get DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED macs, placing them in the + * mac_local field in ether_stat struct. The base address is offset by 2 + * bytes to account for the field being 8 bytes but a mac address is + * only 6 bytes. Likewise, the stride for the get_n_elements function is + * 2 bytes to compensate from the 6 bytes of a mac to the 8 bytes + * allocated by the ether_stat struct, so the macs will land in their + * proper positions. + */ + for (i = 0; i < DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED; i++) + memset(ether_stat->mac_local + i, 0, + sizeof(ether_stat->mac_local[0])); + mac_obj->get_n_elements(bp, &bp->sp_objs[0].mac_obj, + DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED, + ether_stat->mac_local + MAC_PAD, MAC_PAD, + ETH_ALEN); + ether_stat->mtu_size = bp->dev->mtu; + if (bp->dev->features & NETIF_F_RXCSUM) + ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK; + if (bp->dev->features & NETIF_F_TSO) + ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK; + ether_stat->feature_flags |= bp->common.boot_mode; + + ether_stat->promiscuous_mode = (bp->dev->flags & IFF_PROMISC) ? 1 : 0; + + ether_stat->txq_size = bp->tx_ring_size; + ether_stat->rxq_size = bp->rx_ring_size; + +#ifdef CONFIG_BNX2X_SRIOV + ether_stat->vf_cnt = IS_SRIOV(bp) ? bp->vfdb->sriov.nr_virtfn : 0; +#endif +} + +static void bnx2x_drv_info_fcoe_stat(struct bnx2x *bp) +{ + struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; + struct fcoe_stats_info *fcoe_stat = + &bp->slowpath->drv_info_to_mcp.fcoe_stat; + + if (!CNIC_LOADED(bp)) + return; + + memcpy(fcoe_stat->mac_local + MAC_PAD, bp->fip_mac, ETH_ALEN); + + fcoe_stat->qos_priority = + app->traffic_type_priority[LLFC_TRAFFIC_TYPE_FCOE]; + + /* insert FCoE stats from ramrod response */ + if (!NO_FCOE(bp)) { + struct tstorm_per_queue_stats *fcoe_q_tstorm_stats = + &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. + tstorm_queue_statistics; + + struct xstorm_per_queue_stats *fcoe_q_xstorm_stats = + &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]. + xstorm_queue_statistics; + + struct fcoe_statistics_params *fw_fcoe_stat = + &bp->fw_stats_data->fcoe; + + ADD_64_LE(fcoe_stat->rx_bytes_hi, LE32_0, + fcoe_stat->rx_bytes_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); + + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); + + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); + + ADD_64_LE(fcoe_stat->rx_bytes_hi, + fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, + fcoe_stat->rx_bytes_lo, + fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_ucast_pkts); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_bcast_pkts); + + ADD_64_LE(fcoe_stat->rx_frames_hi, LE32_0, + fcoe_stat->rx_frames_lo, + fcoe_q_tstorm_stats->rcv_mcast_pkts); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, LE32_0, + fcoe_stat->tx_bytes_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->ucast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->ucast_bytes_sent.lo); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->bcast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->bcast_bytes_sent.lo); + + ADD_64_LE(fcoe_stat->tx_bytes_hi, + fcoe_q_xstorm_stats->mcast_bytes_sent.hi, + fcoe_stat->tx_bytes_lo, + fcoe_q_xstorm_stats->mcast_bytes_sent.lo); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->ucast_pkts_sent); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->bcast_pkts_sent); + + ADD_64_LE(fcoe_stat->tx_frames_hi, LE32_0, + fcoe_stat->tx_frames_lo, + fcoe_q_xstorm_stats->mcast_pkts_sent); + } + + /* ask L5 driver to add data to the struct */ + bnx2x_cnic_notify(bp, CNIC_CTL_FCOE_STATS_GET_CMD); +} + +static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp) +{ + struct bnx2x_dcbx_app_params *app = &bp->dcbx_port_params.app; + struct iscsi_stats_info *iscsi_stat = + &bp->slowpath->drv_info_to_mcp.iscsi_stat; + + if (!CNIC_LOADED(bp)) + return; + + memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac, + ETH_ALEN); + + iscsi_stat->qos_priority = + app->traffic_type_priority[LLFC_TRAFFIC_TYPE_ISCSI]; + + /* ask L5 driver to add data to the struct */ + bnx2x_cnic_notify(bp, CNIC_CTL_ISCSI_STATS_GET_CMD); +} + +/* called due to MCP event (on pmf): + * reread new bandwidth configuration + * configure FW + * notify others function about the change + */ +static void bnx2x_config_mf_bw(struct bnx2x *bp) +{ + /* Workaround for MFW bug. + * MFW is not supposed to generate BW attention in + * single function mode. + */ + if (!IS_MF(bp)) { + DP(BNX2X_MSG_MCP, + "Ignoring MF BW config in single function mode\n"); + return; + } + + if (bp->link_vars.link_up) { + bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX); + bnx2x_link_sync_notify(bp); + } + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); +} + +static void bnx2x_set_mf_bw(struct bnx2x *bp) +{ + bnx2x_config_mf_bw(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0); +} + +static void bnx2x_handle_eee_event(struct bnx2x *bp) +{ + DP(BNX2X_MSG_MCP, "EEE - LLDP event\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_EEE_RESULTS_ACK, 0); +} + +#define BNX2X_UPDATE_DRV_INFO_IND_LENGTH (20) +#define BNX2X_UPDATE_DRV_INFO_IND_COUNT (25) + +static void bnx2x_handle_drv_info_req(struct bnx2x *bp) +{ + enum drv_info_opcode op_code; + u32 drv_info_ctl = SHMEM2_RD(bp, drv_info_control); + bool release = false; + int wait; + + /* if drv_info version supported by MFW doesn't match - send NACK */ + if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) { + bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); + return; + } + + op_code = (drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >> + DRV_INFO_CONTROL_OP_CODE_SHIFT; + + /* Must prevent other flows from accessing drv_info_to_mcp */ + mutex_lock(&bp->drv_info_mutex); + + memset(&bp->slowpath->drv_info_to_mcp, 0, + sizeof(union drv_info_to_mcp)); + + switch (op_code) { + case ETH_STATS_OPCODE: + bnx2x_drv_info_ether_stat(bp); + break; + case FCOE_STATS_OPCODE: + bnx2x_drv_info_fcoe_stat(bp); + break; + case ISCSI_STATS_OPCODE: + bnx2x_drv_info_iscsi_stat(bp); + break; + default: + /* if op code isn't supported - send NACK */ + bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_NACK, 0); + goto out; + } + + /* if we got drv_info attn from MFW then these fields are defined in + * shmem2 for sure + */ + SHMEM2_WR(bp, drv_info_host_addr_lo, + U64_LO(bnx2x_sp_mapping(bp, drv_info_to_mcp))); + SHMEM2_WR(bp, drv_info_host_addr_hi, + U64_HI(bnx2x_sp_mapping(bp, drv_info_to_mcp))); + + bnx2x_fw_command(bp, DRV_MSG_CODE_DRV_INFO_ACK, 0); + + /* Since possible management wants both this and get_driver_version + * need to wait until management notifies us it finished utilizing + * the buffer. + */ + if (!SHMEM2_HAS(bp, mfw_drv_indication)) { + DP(BNX2X_MSG_MCP, "Management does not support indication\n"); + } else if (!bp->drv_info_mng_owner) { + u32 bit = MFW_DRV_IND_READ_DONE_OFFSET((BP_ABS_FUNC(bp) >> 1)); + + for (wait = 0; wait < BNX2X_UPDATE_DRV_INFO_IND_COUNT; wait++) { + u32 indication = SHMEM2_RD(bp, mfw_drv_indication); + + /* Management is done; need to clear indication */ + if (indication & bit) { + SHMEM2_WR(bp, mfw_drv_indication, + indication & ~bit); + release = true; + break; + } + + msleep(BNX2X_UPDATE_DRV_INFO_IND_LENGTH); + } + } + if (!release) { + DP(BNX2X_MSG_MCP, "Management did not release indication\n"); + bp->drv_info_mng_owner = true; + } + +out: + mutex_unlock(&bp->drv_info_mutex); +} + +static u32 bnx2x_update_mng_version_utility(u8 *version, bool bnx2x_format) +{ + u8 vals[4]; + int i = 0; + + if (bnx2x_format) { + i = sscanf(version, "1.%c%hhd.%hhd.%hhd", + &vals[0], &vals[1], &vals[2], &vals[3]); + if (i > 0) + vals[0] -= '0'; + } else { + i = sscanf(version, "%hhd.%hhd.%hhd.%hhd", + &vals[0], &vals[1], &vals[2], &vals[3]); + } + + while (i < 4) + vals[i++] = 0; + + return (vals[0] << 24) | (vals[1] << 16) | (vals[2] << 8) | vals[3]; +} + +void bnx2x_update_mng_version(struct bnx2x *bp) +{ + u32 iscsiver = DRV_VER_NOT_LOADED; + u32 fcoever = DRV_VER_NOT_LOADED; + u32 ethver = DRV_VER_NOT_LOADED; + int idx = BP_FW_MB_IDX(bp); + u8 *version; + + if (!SHMEM2_HAS(bp, func_os_drv_ver)) + return; + + mutex_lock(&bp->drv_info_mutex); + /* Must not proceed when `bnx2x_handle_drv_info_req' is feasible */ + if (bp->drv_info_mng_owner) + goto out; + + if (bp->state != BNX2X_STATE_OPEN) + goto out; + + /* Parse ethernet driver version */ + ethver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); + if (!CNIC_LOADED(bp)) + goto out; + + /* Try getting storage driver version via cnic */ + memset(&bp->slowpath->drv_info_to_mcp, 0, + sizeof(union drv_info_to_mcp)); + bnx2x_drv_info_iscsi_stat(bp); + version = bp->slowpath->drv_info_to_mcp.iscsi_stat.version; + iscsiver = bnx2x_update_mng_version_utility(version, false); + + memset(&bp->slowpath->drv_info_to_mcp, 0, + sizeof(union drv_info_to_mcp)); + bnx2x_drv_info_fcoe_stat(bp); + version = bp->slowpath->drv_info_to_mcp.fcoe_stat.version; + fcoever = bnx2x_update_mng_version_utility(version, false); + +out: + SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ETHERNET], ethver); + SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_ISCSI], iscsiver); + SHMEM2_WR(bp, func_os_drv_ver[idx].versions[DRV_PERS_FCOE], fcoever); + + mutex_unlock(&bp->drv_info_mutex); + + DP(BNX2X_MSG_MCP, "Setting driver version: ETH [%08x] iSCSI [%08x] FCoE [%08x]\n", + ethver, iscsiver, fcoever); +} + +void bnx2x_update_mfw_dump(struct bnx2x *bp) +{ + u32 drv_ver; + u32 valid_dump; + + if (!SHMEM2_HAS(bp, drv_info)) + return; + + /* Update Driver load time, possibly broken in y2038 */ + SHMEM2_WR(bp, drv_info.epoc, (u32)ktime_get_real_seconds()); + + drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); + SHMEM2_WR(bp, drv_info.drv_ver, drv_ver); + + SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM)); + + /* Check & notify On-Chip dump. */ + valid_dump = SHMEM2_RD(bp, drv_info.valid_dump); + + if (valid_dump & FIRST_DUMP_VALID) + DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n"); + + if (valid_dump & SECOND_DUMP_VALID) + DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n"); +} + +static void bnx2x_oem_event(struct bnx2x *bp, u32 event) +{ + u32 cmd_ok, cmd_fail; + + /* sanity */ + if (event & DRV_STATUS_DCC_EVENT_MASK && + event & DRV_STATUS_OEM_EVENT_MASK) { + BNX2X_ERR("Received simultaneous events %08x\n", event); + return; + } + + if (event & DRV_STATUS_DCC_EVENT_MASK) { + cmd_fail = DRV_MSG_CODE_DCC_FAILURE; + cmd_ok = DRV_MSG_CODE_DCC_OK; + } else /* if (event & DRV_STATUS_OEM_EVENT_MASK) */ { + cmd_fail = DRV_MSG_CODE_OEM_FAILURE; + cmd_ok = DRV_MSG_CODE_OEM_OK; + } + + DP(BNX2X_MSG_MCP, "oem_event 0x%x\n", event); + + if (event & (DRV_STATUS_DCC_DISABLE_ENABLE_PF | + DRV_STATUS_OEM_DISABLE_ENABLE_PF)) { + /* This is the only place besides the function initialization + * where the bp->flags can change so it is done without any + * locks + */ + if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { + DP(BNX2X_MSG_MCP, "mf_cfg function disabled\n"); + bp->flags |= MF_FUNC_DIS; + + bnx2x_e1h_disable(bp); + } else { + DP(BNX2X_MSG_MCP, "mf_cfg function enabled\n"); + bp->flags &= ~MF_FUNC_DIS; + + bnx2x_e1h_enable(bp); + } + event &= ~(DRV_STATUS_DCC_DISABLE_ENABLE_PF | + DRV_STATUS_OEM_DISABLE_ENABLE_PF); + } + + if (event & (DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | + DRV_STATUS_OEM_BANDWIDTH_ALLOCATION)) { + bnx2x_config_mf_bw(bp); + event &= ~(DRV_STATUS_DCC_BANDWIDTH_ALLOCATION | + DRV_STATUS_OEM_BANDWIDTH_ALLOCATION); + } + + /* Report results to MCP */ + if (event) + bnx2x_fw_command(bp, cmd_fail, 0); + else + bnx2x_fw_command(bp, cmd_ok, 0); +} + +/* must be called under the spq lock */ +static struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp) +{ + struct eth_spe *next_spe = bp->spq_prod_bd; + + if (bp->spq_prod_bd == bp->spq_last_bd) { + bp->spq_prod_bd = bp->spq; + bp->spq_prod_idx = 0; + DP(BNX2X_MSG_SP, "end of spq\n"); + } else { + bp->spq_prod_bd++; + bp->spq_prod_idx++; + } + return next_spe; +} + +/* must be called under the spq lock */ +static void bnx2x_sp_prod_update(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + + /* + * Make sure that BD data is updated before writing the producer: + * BD data is written to the memory, the producer is read from the + * memory, thus we need a full memory barrier to ensure the ordering. + */ + mb(); + + REG_WR16_RELAXED(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func), + bp->spq_prod_idx); + mmiowb(); +} + +/** + * bnx2x_is_contextless_ramrod - check if the current command ends on EQ + * + * @cmd: command to check + * @cmd_type: command type + */ +static bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type) +{ + if ((cmd_type == NONE_CONNECTION_TYPE) || + (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) || + (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) || + (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) || + (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) || + (cmd == RAMROD_CMD_ID_ETH_SET_MAC) || + (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) + return true; + else + return false; +} + +/** + * bnx2x_sp_post - place a single command on an SP ring + * + * @bp: driver handle + * @command: command to place (e.g. SETUP, FILTER_RULES, etc.) + * @cid: SW CID the command is related to + * @data_hi: command private data address (high 32 bits) + * @data_lo: command private data address (low 32 bits) + * @cmd_type: command type (e.g. NONE, ETH) + * + * SP data is handled as if it's always an address pair, thus data fields are + * not swapped to little endian in upper functions. Instead this function swaps + * data as if it's two u32 fields. + */ +int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, + u32 data_hi, u32 data_lo, int cmd_type) +{ + struct eth_spe *spe; + u16 type; + bool common = bnx2x_is_contextless_ramrod(command, cmd_type); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + BNX2X_ERR("Can't post SP when there is panic\n"); + return -EIO; + } +#endif + + spin_lock_bh(&bp->spq_lock); + + if (common) { + if (!atomic_read(&bp->eq_spq_left)) { + BNX2X_ERR("BUG! EQ ring full!\n"); + spin_unlock_bh(&bp->spq_lock); + bnx2x_panic(); + return -EBUSY; + } + } else if (!atomic_read(&bp->cq_spq_left)) { + BNX2X_ERR("BUG! SPQ ring full!\n"); + spin_unlock_bh(&bp->spq_lock); + bnx2x_panic(); + return -EBUSY; + } + + spe = bnx2x_sp_get_next(bp); + + /* CID needs port number to be encoded int it */ + spe->hdr.conn_and_cmd_data = + cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) | + HW_CID(bp, cid)); + + /* In some cases, type may already contain the func-id + * mainly in SRIOV related use cases, so we add it here only + * if it's not already set. + */ + if (!(cmd_type & SPE_HDR_FUNCTION_ID)) { + type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & + SPE_HDR_CONN_TYPE; + type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) & + SPE_HDR_FUNCTION_ID); + } else { + type = cmd_type; + } + + spe->hdr.type = cpu_to_le16(type); + + spe->data.update_data_addr.hi = cpu_to_le32(data_hi); + spe->data.update_data_addr.lo = cpu_to_le32(data_lo); + + /* + * It's ok if the actual decrement is issued towards the memory + * somewhere between the spin_lock and spin_unlock. Thus no + * more explicit memory barrier is needed. + */ + if (common) + atomic_dec(&bp->eq_spq_left); + else + atomic_dec(&bp->cq_spq_left); + + DP(BNX2X_MSG_SP, + "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%x,%x)\n", + bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping), + (u32)(U64_LO(bp->spq_mapping) + + (void *)bp->spq_prod_bd - (void *)bp->spq), command, common, + HW_CID(bp, cid), data_hi, data_lo, type, + atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left)); + + bnx2x_sp_prod_update(bp); + spin_unlock_bh(&bp->spq_lock); + return 0; +} + +/* acquire split MCP access lock register */ +static int bnx2x_acquire_alr(struct bnx2x *bp) +{ + u32 j, val; + int rc = 0; + + might_sleep(); + for (j = 0; j < 1000; j++) { + REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, MCPR_ACCESS_LOCK_LOCK); + val = REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK); + if (val & MCPR_ACCESS_LOCK_LOCK) + break; + + usleep_range(5000, 10000); + } + if (!(val & MCPR_ACCESS_LOCK_LOCK)) { + BNX2X_ERR("Cannot acquire MCP access lock register\n"); + rc = -EBUSY; + } + + return rc; +} + +/* release split MCP access lock register */ +static void bnx2x_release_alr(struct bnx2x *bp) +{ + REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0); +} + +#define BNX2X_DEF_SB_ATT_IDX 0x0001 +#define BNX2X_DEF_SB_IDX 0x0002 + +static u16 bnx2x_update_dsb_idx(struct bnx2x *bp) +{ + struct host_sp_status_block *def_sb = bp->def_status_blk; + u16 rc = 0; + + barrier(); /* status block is written to by the chip */ + if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) { + bp->def_att_idx = def_sb->atten_status_block.attn_bits_index; + rc |= BNX2X_DEF_SB_ATT_IDX; + } + + if (bp->def_idx != def_sb->sp_sb.running_index) { + bp->def_idx = def_sb->sp_sb.running_index; + rc |= BNX2X_DEF_SB_IDX; + } + + /* Do not reorder: indices reading should complete before handling */ + barrier(); + return rc; +} + +/* + * slow path service functions + */ + +static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) +{ + int port = BP_PORT(bp); + u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : + NIG_REG_MASK_INTERRUPT_PORT0; + u32 aeu_mask; + u32 nig_mask = 0; + u32 reg_addr; + + if (bp->attn_state & asserted) + BNX2X_ERR("IGU ERROR\n"); + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + aeu_mask = REG_RD(bp, aeu_addr); + + DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n", + aeu_mask, asserted); + aeu_mask &= ~(asserted & 0x3ff); + DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); + + REG_WR(bp, aeu_addr, aeu_mask); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + + DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); + bp->attn_state |= asserted; + DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); + + if (asserted & ATTN_HARD_WIRED_MASK) { + if (asserted & ATTN_NIG_FOR_FUNC) { + + bnx2x_acquire_phy_lock(bp); + + /* save nig interrupt mask */ + nig_mask = REG_RD(bp, nig_int_mask_addr); + + /* If nig_mask is not set, no need to call the update + * function. + */ + if (nig_mask) { + REG_WR(bp, nig_int_mask_addr, 0); + + bnx2x_link_attn(bp); + } + + /* handle unicore attn? */ + } + if (asserted & ATTN_SW_TIMER_4_FUNC) + DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n"); + + if (asserted & GPIO_2_FUNC) + DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n"); + + if (asserted & GPIO_3_FUNC) + DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n"); + + if (asserted & GPIO_4_FUNC) + DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n"); + + if (port == 0) { + if (asserted & ATTN_GENERAL_ATTN_1) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_2) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_3) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0); + } + } else { + if (asserted & ATTN_GENERAL_ATTN_4) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_5) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_6) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0); + } + } + + } /* if hardwired */ + + if (bp->common.int_block == INT_BLOCK_HC) + reg_addr = (HC_REG_COMMAND_REG + port*32 + + COMMAND_REG_ATTN_BITS_SET); + else + reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8); + + DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted, + (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); + REG_WR(bp, reg_addr, asserted); + + /* now set back the mask */ + if (asserted & ATTN_NIG_FOR_FUNC) { + /* Verify that IGU ack through BAR was written before restoring + * NIG mask. This loop should exit after 2-3 iterations max. + */ + if (bp->common.int_block != INT_BLOCK_HC) { + u32 cnt = 0, igu_acked; + do { + igu_acked = REG_RD(bp, + IGU_REG_ATTENTION_ACK_BITS); + } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) && + (++cnt < MAX_IGU_ATTN_ACK_TO)); + if (!igu_acked) + DP(NETIF_MSG_HW, + "Failed to verify IGU ack on time\n"); + barrier(); + } + REG_WR(bp, nig_int_mask_addr, nig_mask); + bnx2x_release_phy_lock(bp); + } +} + +static void bnx2x_fan_failure(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 ext_phy_config; + /* mark the failure */ + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + + ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; + SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config, + ext_phy_config); + + /* log the failure */ + netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n" + "Please contact OEM Support for assistance\n"); + + /* Schedule device reset (unload) + * This is due to some boards consuming sufficient power when driver is + * up to overheat if fan fails. + */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_FAN_FAILURE, 0); +} + +static void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) +{ + int port = BP_PORT(bp); + int reg_offset; + u32 val; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + + if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { + + val = REG_RD(bp, reg_offset); + val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("SPIO5 hw attention\n"); + + /* Fan failure attention */ + bnx2x_hw_reset_phy(&bp->link_params); + bnx2x_fan_failure(bp); + } + + if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) { + bnx2x_acquire_phy_lock(bp); + bnx2x_handle_module_detect_int(&bp->link_params); + bnx2x_release_phy_lock(bp); + } + + if (attn & HW_INTERRUPT_ASSERT_SET_0) { + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUPT_ASSERT_SET_0); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set0 0x%x\n", + (u32)(attn & HW_INTERRUPT_ASSERT_SET_0)); + bnx2x_panic(); + } +} + +static void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) { + + val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); + BNX2X_ERR("DB hw attention 0x%x\n", val); + /* DORQ discard attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from DORQ\n"); + } + + if (attn & HW_INTERRUPT_ASSERT_SET_1) { + + int port = BP_PORT(bp); + int reg_offset; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1); + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUPT_ASSERT_SET_1); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set1 0x%x\n", + (u32)(attn & HW_INTERRUPT_ASSERT_SET_1)); + bnx2x_panic(); + } +} + +static void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { + + val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); + BNX2X_ERR("CFC hw attention 0x%x\n", val); + /* CFC error attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from CFC\n"); + } + + if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); + BNX2X_ERR("PXP hw attention-0 0x%x\n", val); + /* RQ_USDMDP_FIFO_OVERFLOW */ + if (val & 0x18000) + BNX2X_ERR("FATAL error from PXP\n"); + + if (!CHIP_IS_E1x(bp)) { + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1); + BNX2X_ERR("PXP hw attention-1 0x%x\n", val); + } + } + + if (attn & HW_INTERRUPT_ASSERT_SET_2) { + + int port = BP_PORT(bp); + int reg_offset; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2); + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUPT_ASSERT_SET_2); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set2 0x%x\n", + (u32)(attn & HW_INTERRUPT_ASSERT_SET_2)); + bnx2x_panic(); + } +} + +static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { + + if (attn & BNX2X_PMF_LINK_ASSERT) { + int func = BP_FUNC(bp); + + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + bnx2x_read_mf_cfg(bp); + bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp, + func_mf_config[BP_ABS_FUNC(bp)].config); + val = SHMEM_RD(bp, + func_mb[BP_FW_MB_IDX(bp)].drv_status); + + if (val & (DRV_STATUS_DCC_EVENT_MASK | + DRV_STATUS_OEM_EVENT_MASK)) + bnx2x_oem_event(bp, + (val & (DRV_STATUS_DCC_EVENT_MASK | + DRV_STATUS_OEM_EVENT_MASK))); + + if (val & DRV_STATUS_SET_MF_BW) + bnx2x_set_mf_bw(bp); + + if (val & DRV_STATUS_DRV_INFO_REQ) + bnx2x_handle_drv_info_req(bp); + + if (val & DRV_STATUS_VF_DISABLED) + bnx2x_schedule_iov_task(bp, + BNX2X_IOV_HANDLE_FLR); + + if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF)) + bnx2x_pmf_update(bp); + + if (bp->port.pmf && + (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) && + bp->dcbx_enabled > 0) + /* start dcbx state machine */ + bnx2x_dcbx_set_params(bp, + BNX2X_DCBX_STATE_NEG_RECEIVED); + if (val & DRV_STATUS_AFEX_EVENT_MASK) + bnx2x_handle_afex_cmd(bp, + val & DRV_STATUS_AFEX_EVENT_MASK); + if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS) + bnx2x_handle_eee_event(bp); + + if (val & DRV_STATUS_OEM_UPDATE_SVID) + bnx2x_schedule_sp_rtnl(bp, + BNX2X_SP_RTNL_UPDATE_SVID, 0); + + if (bp->link_vars.periodic_flags & + PERIODIC_FLAGS_LINK_EVENT) { + /* sync with link */ + bnx2x_acquire_phy_lock(bp); + bp->link_vars.periodic_flags &= + ~PERIODIC_FLAGS_LINK_EVENT; + bnx2x_release_phy_lock(bp); + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); + bnx2x_link_report(bp); + } + /* Always call it here: bnx2x_link_report() will + * prevent the link indication duplication. + */ + bnx2x__link_status_update(bp); + } else if (attn & BNX2X_MC_ASSERT_BITS) { + + BNX2X_ERR("MC assert!\n"); + bnx2x_mc_assert(bp); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); + bnx2x_panic(); + + } else if (attn & BNX2X_MCP_ASSERT) { + + BNX2X_ERR("MCP assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); + bnx2x_fw_dump(bp); + + } else + BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); + } + + if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { + BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn); + if (attn & BNX2X_GRC_TIMEOUT) { + val = CHIP_IS_E1(bp) ? 0 : + REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN); + BNX2X_ERR("GRC time-out 0x%08x\n", val); + } + if (attn & BNX2X_GRC_RSV) { + val = CHIP_IS_E1(bp) ? 0 : + REG_RD(bp, MISC_REG_GRC_RSV_ATTN); + BNX2X_ERR("GRC reserved 0x%08x\n", val); + } + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); + } +} + +/* + * Bits map: + * 0-7 - Engine0 load counter. + * 8-15 - Engine1 load counter. + * 16 - Engine0 RESET_IN_PROGRESS bit. + * 17 - Engine1 RESET_IN_PROGRESS bit. + * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function + * on the engine + * 19 - Engine1 ONE_IS_LOADED. + * 20 - Chip reset flow bit. When set none-leader must wait for both engines + * leader to complete (check for both RESET_IN_PROGRESS bits and not for + * just the one belonging to its engine). + * + */ +#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1 + +#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff +#define BNX2X_PATH0_LOAD_CNT_SHIFT 0 +#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00 +#define BNX2X_PATH1_LOAD_CNT_SHIFT 8 +#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000 +#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000 +#define BNX2X_GLOBAL_RESET_BIT 0x00040000 + +/* + * Set the GLOBAL_RESET bit. + * + * Should be run under rtnl lock + */ +void bnx2x_set_reset_global(struct bnx2x *bp) +{ + u32 val; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Clear the GLOBAL_RESET bit. + * + * Should be run under rtnl lock + */ +static void bnx2x_clear_reset_global(struct bnx2x *bp) +{ + u32 val; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT)); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Checks the GLOBAL_RESET bit. + * + * should be run under rtnl lock + */ +static bool bnx2x_reset_is_global(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val); + return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false; +} + +/* + * Clear RESET_IN_PROGRESS bit for the current engine. + * + * Should be run under rtnl lock + */ +static void bnx2x_set_reset_done(struct bnx2x *bp) +{ + u32 val; + u32 bit = BP_PATH(bp) ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + /* Clear the bit */ + val &= ~bit; + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Set RESET_IN_PROGRESS for the current engine. + * + * should be run under rtnl lock + */ +void bnx2x_set_reset_in_progress(struct bnx2x *bp) +{ + u32 val; + u32 bit = BP_PATH(bp) ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + /* Set the bit */ + val |= bit; + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/* + * Checks the RESET_IN_PROGRESS bit for the given engine. + * should be run under rtnl lock + */ +bool bnx2x_reset_is_done(struct bnx2x *bp, int engine) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 bit = engine ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + + /* return false if bit is set */ + return (val & bit) ? false : true; +} + +/* + * set pf load for the current pf. + * + * should be run under rtnl lock + */ +void bnx2x_set_pf_load(struct bnx2x *bp) +{ + u32 val1, val; + u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK; + u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_IFUP, "Old GEN_REG_VAL=0x%08x\n", val); + + /* get the current counter value */ + val1 = (val & mask) >> shift; + + /* set bit of that PF */ + val1 |= (1 << bp->pf_num); + + /* clear the old value */ + val &= ~mask; + + /* set the new one */ + val |= ((val1 << shift) & mask); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); +} + +/** + * bnx2x_clear_pf_load - clear pf load mark + * + * @bp: driver handle + * + * Should be run under rtnl lock. + * Decrements the load counter for the current engine. Returns + * whether other functions are still loaded + */ +bool bnx2x_clear_pf_load(struct bnx2x *bp) +{ + u32 val1, val; + u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK; + u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + DP(NETIF_MSG_IFDOWN, "Old GEN_REG_VAL=0x%08x\n", val); + + /* get the current counter value */ + val1 = (val & mask) >> shift; + + /* clear bit of that PF */ + val1 &= ~(1 << bp->pf_num); + + /* clear the old value */ + val &= ~mask; + + /* set the new one */ + val |= ((val1 << shift) & mask); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + return val1 != 0; +} + +/* + * Read the load status for the current engine. + * + * should be run under rtnl lock + */ +static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) +{ + u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK); + u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT); + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "GLOB_REG=0x%08x\n", val); + + val = (val & mask) >> shift; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "load mask for engine %d = 0x%x\n", + engine, val); + + return val != 0; +} + +static void _print_parity(struct bnx2x *bp, u32 reg) +{ + pr_cont(" [0x%08x] ", REG_RD(bp, reg)); +} + +static void _print_next_block(int idx, const char *blk) +{ + pr_cont("%s%s", idx ? ", " : "", blk); +} + +static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, + int *par_num, bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res |= true; /* Each bit is real error! */ + + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: + _print_next_block((*par_num)++, "BRB"); + _print_parity(bp, + BRB1_REG_BRB1_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: + _print_next_block((*par_num)++, + "PARSER"); + _print_parity(bp, PRS_REG_PRS_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: + _print_next_block((*par_num)++, "TSDM"); + _print_parity(bp, + TSDM_REG_TSDM_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: + _print_next_block((*par_num)++, + "SEARCHER"); + _print_parity(bp, SRC_REG_SRC_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: + _print_next_block((*par_num)++, "TCM"); + _print_parity(bp, TCM_REG_TCM_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "TSEMI"); + _print_parity(bp, + TSEM_REG_TSEM_PRTY_STS_0); + _print_parity(bp, + TSEM_REG_TSEM_PRTY_STS_1); + break; + case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, "XPB"); + _print_parity(bp, GRCBASE_XPB + + PB_REG_PB_PRTY_STS); + break; + } + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, + bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res |= true; /* Each bit is real error! */ + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "PBF"); + _print_parity(bp, PBF_REG_PBF_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "QM"); + _print_parity(bp, QM_REG_QM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "TM"); + _print_parity(bp, TM_REG_TM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "XSDM"); + _print_parity(bp, + XSDM_REG_XSDM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "XCM"); + _print_parity(bp, XCM_REG_XCM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "XSEMI"); + _print_parity(bp, + XSEM_REG_XSEM_PRTY_STS_0); + _print_parity(bp, + XSEM_REG_XSEM_PRTY_STS_1); + } + break; + case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "DOORBELLQ"); + _print_parity(bp, + DORQ_REG_DORQ_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "NIG"); + if (CHIP_IS_E1x(bp)) { + _print_parity(bp, + NIG_REG_NIG_PRTY_STS); + } else { + _print_parity(bp, + NIG_REG_NIG_PRTY_STS_0); + _print_parity(bp, + NIG_REG_NIG_PRTY_STS_1); + } + } + break; + case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: + if (print) + _print_next_block((*par_num)++, + "VAUX PCI CORE"); + *global = true; + break; + case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "DEBUG"); + _print_parity(bp, DBG_REG_DBG_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "USDM"); + _print_parity(bp, + USDM_REG_USDM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "UCM"); + _print_parity(bp, UCM_REG_UCM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, + "USEMI"); + _print_parity(bp, + USEM_REG_USEM_PRTY_STS_0); + _print_parity(bp, + USEM_REG_USEM_PRTY_STS_1); + } + break; + case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "UPB"); + _print_parity(bp, GRCBASE_UPB + + PB_REG_PB_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "CSDM"); + _print_parity(bp, + CSDM_REG_CSDM_PRTY_STS); + } + break; + case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: + if (print) { + _print_next_block((*par_num)++, "CCM"); + _print_parity(bp, CCM_REG_CCM_PRTY_STS); + } + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, + int *par_num, bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res = true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "CSEMI"); + _print_parity(bp, + CSEM_REG_CSEM_PRTY_STS_0); + _print_parity(bp, + CSEM_REG_CSEM_PRTY_STS_1); + break; + case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: + _print_next_block((*par_num)++, "PXP"); + _print_parity(bp, PXP_REG_PXP_PRTY_STS); + _print_parity(bp, + PXP2_REG_PXP2_PRTY_STS_0); + _print_parity(bp, + PXP2_REG_PXP2_PRTY_STS_1); + break; + case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, + "PXPPCICLOCKCLIENT"); + break; + case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: + _print_next_block((*par_num)++, "CFC"); + _print_parity(bp, + CFC_REG_CFC_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: + _print_next_block((*par_num)++, "CDU"); + _print_parity(bp, CDU_REG_CDU_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: + _print_next_block((*par_num)++, "DMAE"); + _print_parity(bp, + DMAE_REG_DMAE_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: + _print_next_block((*par_num)++, "IGU"); + if (CHIP_IS_E1x(bp)) + _print_parity(bp, + HC_REG_HC_PRTY_STS); + else + _print_parity(bp, + IGU_REG_IGU_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: + _print_next_block((*par_num)++, "MISC"); + _print_parity(bp, + MISC_REG_MISC_PRTY_STS); + break; + } + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, + bool print) +{ + bool res = false; + u32 cur_bit; + int i; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP ROM"); + *global = true; + res = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP UMP RX"); + *global = true; + res = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: + if (print) + _print_next_block((*par_num)++, + "MCP UMP TX"); + *global = true; + res = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: + (*par_num)++; + /* clear latched SCPAD PATIRY from MCP */ + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, + 1UL << 10); + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, + int *par_num, bool print) +{ + u32 cur_bit; + bool res; + int i; + + res = false; + + for (i = 0; sig; i++) { + cur_bit = (0x1UL << i); + if (sig & cur_bit) { + res = true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: + _print_next_block((*par_num)++, + "PGLUE_B"); + _print_parity(bp, + PGLUE_B_REG_PGLUE_B_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: + _print_next_block((*par_num)++, "ATC"); + _print_parity(bp, + ATC_REG_ATC_PRTY_STS); + break; + } + } + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return res; +} + +static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, + u32 *sig) +{ + bool res = false; + + if ((sig[0] & HW_PRTY_ASSERT_SET_0) || + (sig[1] & HW_PRTY_ASSERT_SET_1) || + (sig[2] & HW_PRTY_ASSERT_SET_2) || + (sig[3] & HW_PRTY_ASSERT_SET_3) || + (sig[4] & HW_PRTY_ASSERT_SET_4)) { + int par_num = 0; + + DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n" + "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n", + sig[0] & HW_PRTY_ASSERT_SET_0, + sig[1] & HW_PRTY_ASSERT_SET_1, + sig[2] & HW_PRTY_ASSERT_SET_2, + sig[3] & HW_PRTY_ASSERT_SET_3, + sig[4] & HW_PRTY_ASSERT_SET_4); + if (print) { + if (((sig[0] & HW_PRTY_ASSERT_SET_0) || + (sig[1] & HW_PRTY_ASSERT_SET_1) || + (sig[2] & HW_PRTY_ASSERT_SET_2) || + (sig[4] & HW_PRTY_ASSERT_SET_4)) || + (sig[3] & HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD)) { + netdev_err(bp->dev, + "Parity errors detected in blocks: "); + } else { + print = false; + } + } + res |= bnx2x_check_blocks_with_parity0(bp, + sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print); + res |= bnx2x_check_blocks_with_parity1(bp, + sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity2(bp, + sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print); + res |= bnx2x_check_blocks_with_parity3(bp, + sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity4(bp, + sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print); + + if (print) + pr_cont("\n"); + } + + return res; +} + +/** + * bnx2x_chk_parity_attn - checks for parity attentions. + * + * @bp: driver handle + * @global: true if there was a global attention + * @print: show parity attention in syslog + */ +bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) +{ + struct attn_route attn = { {0} }; + int port = BP_PORT(bp); + + attn.sig[0] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + + port*4); + attn.sig[1] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + + port*4); + attn.sig[2] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + + port*4); + attn.sig[3] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + + port*4); + /* Since MCP attentions can't be disabled inside the block, we need to + * read AEU registers to see whether they're currently disabled + */ + attn.sig[3] &= ((REG_RD(bp, + !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 + : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & + MISC_AEU_ENABLE_MCP_PRTY_BITS) | + ~MISC_AEU_ENABLE_MCP_PRTY_BITS); + + if (!CHIP_IS_E1x(bp)) + attn.sig[4] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + + port*4); + + return bnx2x_parity_attn(bp, global, print, attn.sig); +} + +static void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn) +{ + u32 val; + if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) { + + val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR); + BNX2X_ERR("PGLUE hw attention 0x%x\n", val); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n"); + if (val & + PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n"); + if (val & + PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n"); + } + if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) { + val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR); + BNX2X_ERR("ATC hw attention 0x%x\n", val); + if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n"); + } + + if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) { + BNX2X_ERR("FATAL parity attention set4 0x%x\n", + (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR))); + } +} + +static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +{ + struct attn_route attn, *group_mask; + int port = BP_PORT(bp); + int index; + u32 reg_addr; + u32 val; + u32 aeu_mask; + bool global = false; + + /* need to take HW lock because MCP or other port might also + try to handle this event */ + bnx2x_acquire_alr(bp); + + if (bnx2x_chk_parity_attn(bp, &global, true)) { +#ifndef BNX2X_STOP_ON_ERROR + bp->recovery_state = BNX2X_RECOVERY_INIT; + schedule_delayed_work(&bp->sp_rtnl_task, 0); + /* Disable HW interrupts */ + bnx2x_int_disable(bp); + /* In case of parity errors don't handle attentions so that + * other function would "see" parity errors. + */ +#else + bnx2x_panic(); +#endif + bnx2x_release_alr(bp); + return; + } + + attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4); + attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4); + attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4); + attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); + if (!CHIP_IS_E1x(bp)) + attn.sig[4] = + REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4); + else + attn.sig[4] = 0; + + DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n", + attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]); + + for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { + if (deasserted & (1 << index)) { + group_mask = &bp->attn_group[index]; + + DP(NETIF_MSG_HW, "group[%d]: %08x %08x %08x %08x %08x\n", + index, + group_mask->sig[0], group_mask->sig[1], + group_mask->sig[2], group_mask->sig[3], + group_mask->sig[4]); + + bnx2x_attn_int_deasserted4(bp, + attn.sig[4] & group_mask->sig[4]); + bnx2x_attn_int_deasserted3(bp, + attn.sig[3] & group_mask->sig[3]); + bnx2x_attn_int_deasserted1(bp, + attn.sig[1] & group_mask->sig[1]); + bnx2x_attn_int_deasserted2(bp, + attn.sig[2] & group_mask->sig[2]); + bnx2x_attn_int_deasserted0(bp, + attn.sig[0] & group_mask->sig[0]); + } + } + + bnx2x_release_alr(bp); + + if (bp->common.int_block == INT_BLOCK_HC) + reg_addr = (HC_REG_COMMAND_REG + port*32 + + COMMAND_REG_ATTN_BITS_CLR); + else + reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8); + + val = ~deasserted; + DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val, + (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); + REG_WR(bp, reg_addr, val); + + if (~bp->attn_state & deasserted) + BNX2X_ERR("IGU ERROR\n"); + + reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + aeu_mask = REG_RD(bp, reg_addr); + + DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n", + aeu_mask, deasserted); + aeu_mask |= (deasserted & 0x3ff); + DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); + + REG_WR(bp, reg_addr, aeu_mask); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + + DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); + bp->attn_state &= ~deasserted; + DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); +} + +static void bnx2x_attn_int(struct bnx2x *bp) +{ + /* read local copy of bits */ + u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block. + attn_bits); + u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block. + attn_bits_ack); + u32 attn_state = bp->attn_state; + + /* look for changed bits */ + u32 asserted = attn_bits & ~attn_ack & ~attn_state; + u32 deasserted = ~attn_bits & attn_ack & attn_state; + + DP(NETIF_MSG_HW, + "attn_bits %x attn_ack %x asserted %x deasserted %x\n", + attn_bits, attn_ack, asserted, deasserted); + + if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) + BNX2X_ERR("BAD attention state\n"); + + /* handle bits that were raised */ + if (asserted) + bnx2x_attn_int_asserted(bp, asserted); + + if (deasserted) + bnx2x_attn_int_deasserted(bp, deasserted); +} + +void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, + u16 index, u8 op, u8 update) +{ + u32 igu_addr = bp->igu_base_addr; + igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; + bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, + igu_addr); +} + +static void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod) +{ + /* No memory barriers */ + storm_memset_eq_prod(bp, prod, BP_FUNC(bp)); + mmiowb(); /* keep prod updates ordered */ +} + +static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid, + union event_ring_elem *elem) +{ + u8 err = elem->message.error; + + if (!bp->cnic_eth_dev.starting_cid || + (cid < bp->cnic_eth_dev.starting_cid && + cid != bp->cnic_eth_dev.iscsi_l2_cid)) + return 1; + + DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid); + + if (unlikely(err)) { + + BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n", + cid); + bnx2x_panic_dump(bp, false); + } + bnx2x_cnic_cfc_comp(bp, cid, err); + return 0; +} + +static void bnx2x_handle_mcast_eqe(struct bnx2x *bp) +{ + struct bnx2x_mcast_ramrod_params rparam; + int rc; + + memset(&rparam, 0, sizeof(rparam)); + + rparam.mcast_obj = &bp->mcast_obj; + + netif_addr_lock_bh(bp->dev); + + /* Clear pending state for the last command */ + bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw); + + /* If there are pending mcast commands - send them */ + if (bp->mcast_obj.check_pending(&bp->mcast_obj)) { + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + if (rc < 0) + BNX2X_ERR("Failed to send pending mcast commands: %d\n", + rc); + } + + netif_addr_unlock_bh(bp->dev); +} + +static void bnx2x_handle_classification_eqe(struct bnx2x *bp, + union event_ring_elem *elem) +{ + unsigned long ramrod_flags = 0; + int rc = 0; + u32 echo = le32_to_cpu(elem->message.data.eth_event.echo); + u32 cid = echo & BNX2X_SWCID_MASK; + struct bnx2x_vlan_mac_obj *vlan_mac_obj; + + /* Always push next commands out, don't wait here */ + __set_bit(RAMROD_CONT, &ramrod_flags); + + switch (echo >> BNX2X_SWCID_SHIFT) { + case BNX2X_FILTER_MAC_PENDING: + DP(BNX2X_MSG_SP, "Got SETUP_MAC completions\n"); + if (CNIC_LOADED(bp) && (cid == BNX2X_ISCSI_ETH_CID(bp))) + vlan_mac_obj = &bp->iscsi_l2_mac_obj; + else + vlan_mac_obj = &bp->sp_objs[cid].mac_obj; + + break; + case BNX2X_FILTER_VLAN_PENDING: + DP(BNX2X_MSG_SP, "Got SETUP_VLAN completions\n"); + vlan_mac_obj = &bp->sp_objs[cid].vlan_obj; + break; + case BNX2X_FILTER_MCAST_PENDING: + DP(BNX2X_MSG_SP, "Got SETUP_MCAST completions\n"); + /* This is only relevant for 57710 where multicast MACs are + * configured as unicast MACs using the same ramrod. + */ + bnx2x_handle_mcast_eqe(bp); + return; + default: + BNX2X_ERR("Unsupported classification command: 0x%x\n", echo); + return; + } + + rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags); + + if (rc < 0) + BNX2X_ERR("Failed to schedule new commands: %d\n", rc); + else if (rc > 0) + DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n"); +} + +static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start); + +static void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp) +{ + netif_addr_lock_bh(bp->dev); + + clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); + + /* Send rx_mode command again if was requested */ + if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state)) + bnx2x_set_storm_rx_mode(bp); + else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, + &bp->sp_state)) + bnx2x_set_iscsi_eth_rx_mode(bp, true); + else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, + &bp->sp_state)) + bnx2x_set_iscsi_eth_rx_mode(bp, false); + + netif_addr_unlock_bh(bp->dev); +} + +static void bnx2x_after_afex_vif_lists(struct bnx2x *bp, + union event_ring_elem *elem) +{ + if (elem->message.data.vif_list_event.echo == VIF_LIST_RULE_GET) { + DP(BNX2X_MSG_SP, + "afex: ramrod completed VIF LIST_GET, addrs 0x%x\n", + elem->message.data.vif_list_event.func_bit_map); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTGET_ACK, + elem->message.data.vif_list_event.func_bit_map); + } else if (elem->message.data.vif_list_event.echo == + VIF_LIST_RULE_SET) { + DP(BNX2X_MSG_SP, "afex: ramrod completed VIF LIST_SET\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_LISTSET_ACK, 0); + } +} + +/* called with rtnl_lock */ +static void bnx2x_after_function_update(struct bnx2x *bp) +{ + int q, rc; + struct bnx2x_fastpath *fp; + struct bnx2x_queue_state_params queue_params = {NULL}; + struct bnx2x_queue_update_params *q_update_params = + &queue_params.params.update; + + /* Send Q update command with afex vlan removal values for all Qs */ + queue_params.cmd = BNX2X_Q_CMD_UPDATE; + + /* set silent vlan removal values according to vlan mode */ + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + &q_update_params->update_flags); + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, + &q_update_params->update_flags); + __set_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); + + /* in access mode mark mask and value are 0 to strip all vlans */ + if (bp->afex_vlan_mode == FUNC_MF_CFG_AFEX_VLAN_ACCESS_MODE) { + q_update_params->silent_removal_value = 0; + q_update_params->silent_removal_mask = 0; + } else { + q_update_params->silent_removal_value = + (bp->afex_def_vlan_tag & VLAN_VID_MASK); + q_update_params->silent_removal_mask = VLAN_VID_MASK; + } + + for_each_eth_queue(bp, q) { + /* Set the appropriate Queue object */ + fp = &bp->fp[q]; + queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* send the ramrod */ + rc = bnx2x_queue_state_change(bp, &queue_params); + if (rc < 0) + BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", + q); + } + + if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) { + fp = &bp->fp[FCOE_IDX(bp)]; + queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* clear pending completion bit */ + __clear_bit(RAMROD_COMP_WAIT, &queue_params.ramrod_flags); + + /* mark latest Q bit */ + smp_mb__before_atomic(); + set_bit(BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, &bp->sp_state); + smp_mb__after_atomic(); + + /* send Q update ramrod for FCoE Q */ + rc = bnx2x_queue_state_change(bp, &queue_params); + if (rc < 0) + BNX2X_ERR("Failed to config silent vlan rem for Q %d\n", + q); + } else { + /* If no FCoE ring - ACK MCP now */ + bnx2x_link_report(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); + } +} + +static struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj( + struct bnx2x *bp, u32 cid) +{ + DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid); + + if (CNIC_LOADED(bp) && (cid == BNX2X_FCOE_ETH_CID(bp))) + return &bnx2x_fcoe_sp_obj(bp, q_obj); + else + return &bp->sp_objs[CID_TO_FP(cid, bp)].q_obj; +} + +static void bnx2x_eq_int(struct bnx2x *bp) +{ + u16 hw_cons, sw_cons, sw_prod; + union event_ring_elem *elem; + u8 echo; + u32 cid; + u8 opcode; + int rc, spqe_cnt = 0; + struct bnx2x_queue_sp_obj *q_obj; + struct bnx2x_func_sp_obj *f_obj = &bp->func_obj; + struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw; + + hw_cons = le16_to_cpu(*bp->eq_cons_sb); + + /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256. + * when we get the next-page we need to adjust so the loop + * condition below will be met. The next element is the size of a + * regular element and hence incrementing by 1 + */ + if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) + hw_cons++; + + /* This function may never run in parallel with itself for a + * specific bp, thus there is no need in "paired" read memory + * barrier here. + */ + sw_cons = bp->eq_cons; + sw_prod = bp->eq_prod; + + DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n", + hw_cons, sw_cons, atomic_read(&bp->eq_spq_left)); + + for (; sw_cons != hw_cons; + sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) { + + elem = &bp->eq_ring[EQ_DESC(sw_cons)]; + + rc = bnx2x_iov_eq_sp_event(bp, elem); + if (!rc) { + DP(BNX2X_MSG_IOV, "bnx2x_iov_eq_sp_event returned %d\n", + rc); + goto next_spqe; + } + + opcode = elem->message.opcode; + + /* handle eq element */ + switch (opcode) { + case EVENT_RING_OPCODE_VF_PF_CHANNEL: + bnx2x_vf_mbx_schedule(bp, + &elem->message.data.vf_pf_event); + continue; + + case EVENT_RING_OPCODE_STAT_QUERY: + DP_AND((BNX2X_MSG_SP | BNX2X_MSG_STATS), + "got statistics comp event %d\n", + bp->stats_comp++); + /* nothing to do with stats comp */ + goto next_spqe; + + case EVENT_RING_OPCODE_CFC_DEL: + /* handle according to cid range */ + /* + * we may want to verify here that the bp state is + * HALTING + */ + + /* elem CID originates from FW; actually LE */ + cid = SW_CID(elem->message.data.cfc_del_event.cid); + + DP(BNX2X_MSG_SP, + "got delete ramrod for MULTI[%d]\n", cid); + + if (CNIC_LOADED(bp) && + !bnx2x_cnic_handle_cfc_del(bp, cid, elem)) + goto next_spqe; + + q_obj = bnx2x_cid_to_q_obj(bp, cid); + + if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_STOP_TRAFFIC: + DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n"); + bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_TX_STOP)) + break; + goto next_spqe; + + case EVENT_RING_OPCODE_START_TRAFFIC: + DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n"); + bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_TX_START)) + break; + goto next_spqe; + + case EVENT_RING_OPCODE_FUNCTION_UPDATE: + echo = elem->message.data.function_update_event.echo; + if (echo == SWITCH_UPDATE) { + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "got FUNC_SWITCH_UPDATE ramrod\n"); + if (f_obj->complete_cmd( + bp, f_obj, BNX2X_F_CMD_SWITCH_UPDATE)) + break; + + } else { + int cmd = BNX2X_SP_RTNL_AFEX_F_UPDATE; + + DP(BNX2X_MSG_SP | BNX2X_MSG_MCP, + "AFEX: ramrod completed FUNCTION_UPDATE\n"); + f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_AFEX_UPDATE); + + /* We will perform the Queues update from + * sp_rtnl task as all Queue SP operations + * should run under rtnl_lock. + */ + bnx2x_schedule_sp_rtnl(bp, cmd, 0); + } + + goto next_spqe; + + case EVENT_RING_OPCODE_AFEX_VIF_LISTS: + f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_AFEX_VIFLISTS); + bnx2x_after_afex_vif_lists(bp, elem); + goto next_spqe; + case EVENT_RING_OPCODE_FUNCTION_START: + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "got FUNC_START ramrod\n"); + if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_FUNCTION_STOP: + DP(BNX2X_MSG_SP | NETIF_MSG_IFUP, + "got FUNC_STOP ramrod\n"); + if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_SET_TIMESYNC: + DP(BNX2X_MSG_SP | BNX2X_MSG_PTP, + "got set_timesync ramrod completion\n"); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_SET_TIMESYNC)) + break; + goto next_spqe; + } + + switch (opcode | bp->state) { + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_OPENING_WAIT4_PORT): + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n", + SW_CID(elem->message.data.eth_event.echo)); + rss_raw->clear_pending(rss_raw); + break; + + case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_SET_MAC | + BNX2X_STATE_CLOSING_WAIT4_HALT): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got (un)set vlan/mac ramrod\n"); + bnx2x_handle_classification_eqe(bp, elem); + break; + + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got mcast ramrod\n"); + bnx2x_handle_mcast_eqe(bp); + break; + + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got rx_mode ramrod\n"); + bnx2x_handle_rx_mode_eqe(bp); + break; + default: + /* unknown event log error and continue */ + BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n", + elem->message.opcode, bp->state); + } +next_spqe: + spqe_cnt++; + } /* for */ + + smp_mb__before_atomic(); + atomic_add(spqe_cnt, &bp->eq_spq_left); + + bp->eq_cons = sw_cons; + bp->eq_prod = sw_prod; + /* Make sure that above mem writes were issued towards the memory */ + smp_wmb(); + + /* update producer */ + bnx2x_update_eq_prod(bp, bp->eq_prod); +} + +static void bnx2x_sp_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work); + + DP(BNX2X_MSG_SP, "sp task invoked\n"); + + /* make sure the atomic interrupt_occurred has been written */ + smp_rmb(); + if (atomic_read(&bp->interrupt_occurred)) { + + /* what work needs to be performed? */ + u16 status = bnx2x_update_dsb_idx(bp); + + DP(BNX2X_MSG_SP, "status %x\n", status); + DP(BNX2X_MSG_SP, "setting interrupt_occurred to 0\n"); + atomic_set(&bp->interrupt_occurred, 0); + + /* HW attentions */ + if (status & BNX2X_DEF_SB_ATT_IDX) { + bnx2x_attn_int(bp); + status &= ~BNX2X_DEF_SB_ATT_IDX; + } + + /* SP events: STAT_QUERY and others */ + if (status & BNX2X_DEF_SB_IDX) { + struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); + + if (FCOE_INIT(bp) && + (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { + /* Prevent local bottom-halves from running as + * we are going to change the local NAPI list. + */ + local_bh_disable(); + napi_schedule(&bnx2x_fcoe(bp, napi)); + local_bh_enable(); + } + + /* Handle EQ completions */ + bnx2x_eq_int(bp); + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, + le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); + + status &= ~BNX2X_DEF_SB_IDX; + } + + /* if status is non zero then perhaps something went wrong */ + if (unlikely(status)) + DP(BNX2X_MSG_SP, + "got an unknown interrupt! (status 0x%x)\n", status); + + /* ack status block only if something was actually handled */ + bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, + le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); + } + + /* afex - poll to check if VIFSET_ACK should be sent to MFW */ + if (test_and_clear_bit(BNX2X_AFEX_PENDING_VIFSET_MCP_ACK, + &bp->sp_state)) { + bnx2x_link_report(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0); + } +} + +irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct bnx2x *bp = netdev_priv(dev); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, + IGU_INT_DISABLE, 0); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + if (CNIC_LOADED(bp)) { + struct cnic_ops *c_ops; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); + } + + /* schedule sp task to perform default status block work, ack + * attentions and enable interrupts. + */ + bnx2x_schedule_sp_task(bp); + + return IRQ_HANDLED; +} + +/* end of slow path */ + +void bnx2x_drv_pulse(struct bnx2x *bp) +{ + SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb, + bp->fw_drv_pulse_wr_seq); +} + +static void bnx2x_timer(struct timer_list *t) +{ + struct bnx2x *bp = from_timer(bp, t, timer); + + if (!netif_running(bp->dev)) + return; + + if (IS_PF(bp) && + !BP_NOMCP(bp)) { + int mb_idx = BP_FW_MB_IDX(bp); + u16 drv_pulse; + u16 mcp_pulse; + + ++bp->fw_drv_pulse_wr_seq; + bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; + drv_pulse = bp->fw_drv_pulse_wr_seq; + bnx2x_drv_pulse(bp); + + mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & + MCP_PULSE_SEQ_MASK); + /* The delta between driver pulse and mcp response + * should not get too big. If the MFW is more than 5 pulses + * behind, we should worry about it enough to generate an error + * log. + */ + if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) + BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", + drv_pulse, mcp_pulse); + } + + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_stats_handle(bp, STATS_EVENT_UPDATE); + + /* sample pf vf bulletin board for new posts from pf */ + if (IS_VF(bp)) + bnx2x_timer_sriov(bp); + + mod_timer(&bp->timer, jiffies + bp->current_interval); +} + +/* end of Statistics */ + +/* nic init */ + +/* + * nic init service functions + */ + +static void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) +{ + u32 i; + if (!(len%4) && !(addr%4)) + for (i = 0; i < len; i += 4) + REG_WR(bp, addr + i, fill); + else + for (i = 0; i < len; i++) + REG_WR8(bp, addr + i, fill); +} + +/* helper: writes FP SP data to FW - data_size in dwords */ +static void bnx2x_wr_fp_sb_data(struct bnx2x *bp, + int fw_sb_id, + u32 *sb_data_p, + u32 data_size) +{ + int index; + for (index = 0; index < data_size; index++) + REG_WR(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) + + sizeof(u32)*index, + *(sb_data_p + index)); +} + +static void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id) +{ + u32 *sb_data_p; + u32 data_size = 0; + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + + /* disable the function first */ + if (!CHIP_IS_E1x(bp)) { + memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); + sb_data_e2.common.state = SB_DISABLED; + sb_data_e2.common.p_func.vf_valid = false; + sb_data_p = (u32 *)&sb_data_e2; + data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + } else { + memset(&sb_data_e1x, 0, + sizeof(struct hc_status_block_data_e1x)); + sb_data_e1x.common.state = SB_DISABLED; + sb_data_e1x.common.p_func.vf_valid = false; + sb_data_p = (u32 *)&sb_data_e1x; + data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + } + bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); + + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0, + CSTORM_STATUS_BLOCK_SIZE); + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0, + CSTORM_SYNC_BLOCK_SIZE); +} + +/* helper: writes SP SB data to FW */ +static void bnx2x_wr_sp_sb_data(struct bnx2x *bp, + struct hc_sp_status_block_data *sp_sb_data) +{ + int func = BP_FUNC(bp); + int i; + for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++) + REG_WR(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) + + i*sizeof(u32), + *((u32 *)sp_sb_data + i)); +} + +static void bnx2x_zero_sp_sb(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + struct hc_sp_status_block_data sp_sb_data; + memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); + + sp_sb_data.state = SB_DISABLED; + sp_sb_data.p_func.vf_valid = false; + + bnx2x_wr_sp_sb_data(bp, &sp_sb_data); + + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0, + CSTORM_SP_STATUS_BLOCK_SIZE); + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0, + CSTORM_SP_SYNC_BLOCK_SIZE); +} + +static void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, + int igu_sb_id, int igu_seg_id) +{ + hc_sm->igu_sb_id = igu_sb_id; + hc_sm->igu_seg_id = igu_seg_id; + hc_sm->timer_value = 0xFF; + hc_sm->time_to_expire = 0xFFFFFFFF; +} + +/* allocates state machine ids. */ +static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) +{ + /* zero out state machine indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; + + /* map indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= + SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; +} + +void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, + u8 vf_valid, int fw_sb_id, int igu_sb_id) +{ + int igu_seg_id; + + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + struct hc_status_block_sm *hc_sm_p; + int data_size; + u32 *sb_data_p; + + if (CHIP_INT_MODE_IS_BC(bp)) + igu_seg_id = HC_SEG_ACCESS_NORM; + else + igu_seg_id = IGU_SEG_ACCESS_NORM; + + bnx2x_zero_fp_sb(bp, fw_sb_id); + + if (!CHIP_IS_E1x(bp)) { + memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); + sb_data_e2.common.state = SB_ENABLED; + sb_data_e2.common.p_func.pf_id = BP_FUNC(bp); + sb_data_e2.common.p_func.vf_id = vfid; + sb_data_e2.common.p_func.vf_valid = vf_valid; + sb_data_e2.common.p_func.vnic_id = BP_VN(bp); + sb_data_e2.common.same_igu_sb_1b = true; + sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping); + sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping); + hc_sm_p = sb_data_e2.common.state_machine; + sb_data_p = (u32 *)&sb_data_e2; + data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e2.index_data); + } else { + memset(&sb_data_e1x, 0, + sizeof(struct hc_status_block_data_e1x)); + sb_data_e1x.common.state = SB_ENABLED; + sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp); + sb_data_e1x.common.p_func.vf_id = 0xff; + sb_data_e1x.common.p_func.vf_valid = false; + sb_data_e1x.common.p_func.vnic_id = BP_VN(bp); + sb_data_e1x.common.same_igu_sb_1b = true; + sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping); + sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping); + hc_sm_p = sb_data_e1x.common.state_machine; + sb_data_p = (u32 *)&sb_data_e1x; + data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e1x.index_data); + } + + bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], + igu_sb_id, igu_seg_id); + bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], + igu_sb_id, igu_seg_id); + + DP(NETIF_MSG_IFUP, "Init FW SB %d\n", fw_sb_id); + + /* write indices to HW - PCI guarantees endianity of regpairs */ + bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); +} + +static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id, + u16 tx_usec, u16 rx_usec) +{ + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS, + false, rx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS0, false, + tx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS1, false, + tx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS2, false, + tx_usec); +} + +static void bnx2x_init_def_sb(struct bnx2x *bp) +{ + struct host_sp_status_block *def_sb = bp->def_status_blk; + dma_addr_t mapping = bp->def_status_blk_mapping; + int igu_sp_sb_index; + int igu_seg_id; + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int reg_offset, reg_offset_en5; + u64 section; + int index; + struct hc_sp_status_block_data sp_sb_data; + memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); + + if (CHIP_INT_MODE_IS_BC(bp)) { + igu_sp_sb_index = DEF_SB_IGU_ID; + igu_seg_id = HC_SEG_ACCESS_DEF; + } else { + igu_sp_sb_index = bp->igu_dsb_id; + igu_seg_id = IGU_SEG_ACCESS_DEF; + } + + /* ATTN */ + section = ((u64)mapping) + offsetof(struct host_sp_status_block, + atten_status_block); + def_sb->atten_status_block.status_block_id = igu_sp_sb_index; + + bp->attn_state = 0; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0); + for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { + int sindex; + /* take care of sig[0]..sig[4] */ + for (sindex = 0; sindex < 4; sindex++) + bp->attn_group[index].sig[sindex] = + REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index); + + if (!CHIP_IS_E1x(bp)) + /* + * enable5 is separate from the rest of the registers, + * and therefore the address skip is 4 + * and not 16 between the different groups + */ + bp->attn_group[index].sig[4] = REG_RD(bp, + reg_offset_en5 + 0x4*index); + else + bp->attn_group[index].sig[4] = 0; + } + + if (bp->common.int_block == INT_BLOCK_HC) { + reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L : + HC_REG_ATTN_MSG0_ADDR_L); + + REG_WR(bp, reg_offset, U64_LO(section)); + REG_WR(bp, reg_offset + 4, U64_HI(section)); + } else if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section)); + REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section)); + } + + section = ((u64)mapping) + offsetof(struct host_sp_status_block, + sp_sb); + + bnx2x_zero_sp_sb(bp); + + /* PCI guarantees endianity of regpairs */ + sp_sb_data.state = SB_ENABLED; + sp_sb_data.host_sb_addr.lo = U64_LO(section); + sp_sb_data.host_sb_addr.hi = U64_HI(section); + sp_sb_data.igu_sb_id = igu_sp_sb_index; + sp_sb_data.igu_seg_id = igu_seg_id; + sp_sb_data.p_func.pf_id = func; + sp_sb_data.p_func.vnic_id = BP_VN(bp); + sp_sb_data.p_func.vf_id = 0xff; + + bnx2x_wr_sp_sb_data(bp, &sp_sb_data); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0); +} + +void bnx2x_update_coalesce(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) + bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id, + bp->tx_ticks, bp->rx_ticks); +} + +static void bnx2x_init_sp_ring(struct bnx2x *bp) +{ + spin_lock_init(&bp->spq_lock); + atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING); + + bp->spq_prod_idx = 0; + bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; + bp->spq_prod_bd = bp->spq; + bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; +} + +static void bnx2x_init_eq_ring(struct bnx2x *bp) +{ + int i; + for (i = 1; i <= NUM_EQ_PAGES; i++) { + union event_ring_elem *elem = + &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1]; + + elem->next_page.addr.hi = + cpu_to_le32(U64_HI(bp->eq_mapping + + BCM_PAGE_SIZE * (i % NUM_EQ_PAGES))); + elem->next_page.addr.lo = + cpu_to_le32(U64_LO(bp->eq_mapping + + BCM_PAGE_SIZE*(i % NUM_EQ_PAGES))); + } + bp->eq_cons = 0; + bp->eq_prod = NUM_EQ_DESC; + bp->eq_cons_sb = BNX2X_EQ_INDEX; + /* we want a warning message before it gets wrought... */ + atomic_set(&bp->eq_spq_left, + min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1); +} + +/* called with netif_addr_lock_bh() */ +static int bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, + unsigned long rx_mode_flags, + unsigned long rx_accept_flags, + unsigned long tx_accept_flags, + unsigned long ramrod_flags) +{ + struct bnx2x_rx_mode_ramrod_params ramrod_param; + int rc; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Prepare ramrod parameters */ + ramrod_param.cid = 0; + ramrod_param.cl_id = cl_id; + ramrod_param.rx_mode_obj = &bp->rx_mode_obj; + ramrod_param.func_id = BP_FUNC(bp); + + ramrod_param.pstate = &bp->sp_state; + ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING; + + ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata); + ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata); + + set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); + + ramrod_param.ramrod_flags = ramrod_flags; + ramrod_param.rx_mode_flags = rx_mode_flags; + + ramrod_param.rx_accept_flags = rx_accept_flags; + ramrod_param.tx_accept_flags = tx_accept_flags; + + rc = bnx2x_config_rx_mode(bp, &ramrod_param); + if (rc < 0) { + BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode); + return rc; + } + + return 0; +} + +static int bnx2x_fill_accept_flags(struct bnx2x *bp, u32 rx_mode, + unsigned long *rx_accept_flags, + unsigned long *tx_accept_flags) +{ + /* Clear the flags first */ + *rx_accept_flags = 0; + *tx_accept_flags = 0; + + switch (rx_mode) { + case BNX2X_RX_MODE_NONE: + /* + * 'drop all' supersedes any accept flags that may have been + * passed to the function. + */ + break; + case BNX2X_RX_MODE_NORMAL: + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); + + if (bp->accept_any_vlan) { + __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); + } + + break; + case BNX2X_RX_MODE_ALLMULTI: + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); + + if (bp->accept_any_vlan) { + __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); + } + + break; + case BNX2X_RX_MODE_PROMISC: + /* According to definition of SI mode, iface in promisc mode + * should receive matched and unmatched (in resolution of port) + * unicast packets. + */ + __set_bit(BNX2X_ACCEPT_UNMATCHED, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, tx_accept_flags); + + if (IS_MF_SI(bp)) + __set_bit(BNX2X_ACCEPT_ALL_UNICAST, tx_accept_flags); + else + __set_bit(BNX2X_ACCEPT_UNICAST, tx_accept_flags); + + __set_bit(BNX2X_ACCEPT_ANY_VLAN, rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, tx_accept_flags); + + break; + default: + BNX2X_ERR("Unknown rx_mode: %d\n", rx_mode); + return -EINVAL; + } + + return 0; +} + +/* called with netif_addr_lock_bh() */ +static int bnx2x_set_storm_rx_mode(struct bnx2x *bp) +{ + unsigned long rx_mode_flags = 0, ramrod_flags = 0; + unsigned long rx_accept_flags = 0, tx_accept_flags = 0; + int rc; + + if (!NO_FCOE(bp)) + /* Configure rx_mode of FCoE Queue */ + __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); + + rc = bnx2x_fill_accept_flags(bp, bp->rx_mode, &rx_accept_flags, + &tx_accept_flags); + if (rc) + return rc; + + __set_bit(RAMROD_RX, &ramrod_flags); + __set_bit(RAMROD_TX, &ramrod_flags); + + return bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, + rx_accept_flags, tx_accept_flags, + ramrod_flags); +} + +static void bnx2x_init_internal_common(struct bnx2x *bp) +{ + int i; + + /* Zero this manually as its initialization is + currently missing in the initTool */ + for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_AGG_DATA_OFFSET + i * 4, 0); + if (!CHIP_IS_E1x(bp)) { + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET, + CHIP_INT_MODE_IS_BC(bp) ? + HC_IGU_BC_MODE : HC_IGU_NBC_MODE); + } +} + +static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code) +{ + switch (load_code) { + case FW_MSG_CODE_DRV_LOAD_COMMON: + case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: + bnx2x_init_internal_common(bp); + /* no break */ + + case FW_MSG_CODE_DRV_LOAD_PORT: + /* nothing to do */ + /* no break */ + + case FW_MSG_CODE_DRV_LOAD_FUNCTION: + /* internal memory per function is + initialized inside bnx2x_pf_init */ + break; + + default: + BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code); + break; + } +} + +static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp) +{ + return fp->bp->igu_base_sb + fp->index + CNIC_SUPPORT(fp->bp); +} + +static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp) +{ + return fp->bp->base_fw_ndsb + fp->index + CNIC_SUPPORT(fp->bp); +} + +static u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp) +{ + if (CHIP_IS_E1x(fp->bp)) + return BP_L_ID(fp->bp) + fp->index; + else /* We want Client ID to be the same as IGU SB ID for 57712 */ + return bnx2x_fp_igu_sb_id(fp); +} + +static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) +{ + struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; + u8 cos; + unsigned long q_type = 0; + u32 cids[BNX2X_MULTI_TX_COS] = { 0 }; + fp->rx_queue = fp_idx; + fp->cid = fp_idx; + fp->cl_id = bnx2x_fp_cl_id(fp); + fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp); + fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp); + /* qZone id equals to FW (per path) client id */ + fp->cl_qzone_id = bnx2x_fp_qzone_id(fp); + + /* init shortcut */ + fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp); + + /* Setup SB indices */ + fp->rx_cons_sb = BNX2X_RX_SB_INDEX; + + /* Configure Queue State object */ + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS); + + /* init tx data */ + for_each_cos_in_tx_queue(fp, cos) { + bnx2x_init_txdata(bp, fp->txdata_ptr[cos], + CID_COS_TO_TX_ONLY_CID(fp->cid, cos, bp), + FP_COS_TO_TXQ(fp, cos, bp), + BNX2X_TX_SB_INDEX_BASE + cos, fp); + cids[cos] = fp->txdata_ptr[cos]->cid; + } + + /* nothing more for vf to do here */ + if (IS_VF(bp)) + return; + + bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, + fp->fw_sb_id, fp->igu_sb_id); + bnx2x_update_fpsb_idx(fp); + bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids, + fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), + bnx2x_sp_mapping(bp, q_rdata), q_type); + + /** + * Configure classification DBs: Always enable Tx switching + */ + bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX); + + DP(NETIF_MSG_IFUP, + "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", + fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, + fp->igu_sb_id); +} + +static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata) +{ + int i; + + for (i = 1; i <= NUM_TX_RINGS; i++) { + struct eth_tx_next_bd *tx_next_bd = + &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd; + + tx_next_bd->addr_hi = + cpu_to_le32(U64_HI(txdata->tx_desc_mapping + + BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); + tx_next_bd->addr_lo = + cpu_to_le32(U64_LO(txdata->tx_desc_mapping + + BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); + } + + *txdata->tx_cons_sb = cpu_to_le16(0); + + SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1); + txdata->tx_db.data.zero_fill1 = 0; + txdata->tx_db.data.prod = 0; + + txdata->tx_pkt_prod = 0; + txdata->tx_pkt_cons = 0; + txdata->tx_bd_prod = 0; + txdata->tx_bd_cons = 0; + txdata->tx_pkt = 0; +} + +static void bnx2x_init_tx_rings_cnic(struct bnx2x *bp) +{ + int i; + + for_each_tx_queue_cnic(bp, i) + bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[0]); +} + +static void bnx2x_init_tx_rings(struct bnx2x *bp) +{ + int i; + u8 cos; + + for_each_eth_queue(bp, i) + for_each_cos_in_tx_queue(&bp->fp[i], cos) + bnx2x_init_tx_ring_one(bp->fp[i].txdata_ptr[cos]); +} + +static void bnx2x_init_fcoe_fp(struct bnx2x *bp) +{ + struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); + unsigned long q_type = 0; + + bnx2x_fcoe(bp, rx_queue) = BNX2X_NUM_ETH_QUEUES(bp); + bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp, + BNX2X_FCOE_ETH_CL_ID_IDX); + bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID(bp); + bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID; + bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id; + bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX; + bnx2x_init_txdata(bp, bnx2x_fcoe(bp, txdata_ptr[0]), + fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX, + fp); + + DP(NETIF_MSG_IFUP, "created fcoe tx data (fp index %d)\n", fp->index); + + /* qZone id equals to FW (per path) client id */ + bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp); + /* init shortcut */ + bnx2x_fcoe(bp, ustorm_rx_prods_offset) = + bnx2x_rx_ustorm_prods_offset(fp); + + /* Configure Queue State object */ + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + /* No multi-CoS for FCoE L2 client */ + BUG_ON(fp->max_cos != 1); + + bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, + &fp->cid, 1, BP_FUNC(bp), bnx2x_sp(bp, q_rdata), + bnx2x_sp_mapping(bp, q_rdata), q_type); + + DP(NETIF_MSG_IFUP, + "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n", + fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, + fp->igu_sb_id); +} + +void bnx2x_nic_init_cnic(struct bnx2x *bp) +{ + if (!NO_FCOE(bp)) + bnx2x_init_fcoe_fp(bp); + + bnx2x_init_sb(bp, bp->cnic_sb_mapping, + BNX2X_VF_ID_INVALID, false, + bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp)); + + /* ensure status block indices were read */ + rmb(); + bnx2x_init_rx_rings_cnic(bp); + bnx2x_init_tx_rings_cnic(bp); + + /* flush all */ + mb(); + mmiowb(); +} + +void bnx2x_pre_irq_nic_init(struct bnx2x *bp) +{ + int i; + + /* Setup NIC internals and enable interrupts */ + for_each_eth_queue(bp, i) + bnx2x_init_eth_fp(bp, i); + + /* ensure status block indices were read */ + rmb(); + bnx2x_init_rx_rings(bp); + bnx2x_init_tx_rings(bp); + + if (IS_PF(bp)) { + /* Initialize MOD_ABS interrupts */ + bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id, + bp->common.shmem_base, + bp->common.shmem2_base, BP_PORT(bp)); + + /* initialize the default status block and sp ring */ + bnx2x_init_def_sb(bp); + bnx2x_update_dsb_idx(bp); + bnx2x_init_sp_ring(bp); + } else { + bnx2x_memset_stats(bp); + } +} + +void bnx2x_post_irq_nic_init(struct bnx2x *bp, u32 load_code) +{ + bnx2x_init_eq_ring(bp); + bnx2x_init_internal(bp, load_code); + bnx2x_pf_init(bp); + bnx2x_stats_init(bp); + + /* flush all before enabling interrupts */ + mb(); + mmiowb(); + + bnx2x_int_enable(bp); + + /* Check for SPIO5 */ + bnx2x_attn_int_deasserted0(bp, + REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) & + AEU_INPUTS_ATTN_BITS_SPIO5); +} + +/* gzip service functions */ +static int bnx2x_gunzip_init(struct bnx2x *bp) +{ + bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE, + &bp->gunzip_mapping, GFP_KERNEL); + if (bp->gunzip_buf == NULL) + goto gunzip_nomem1; + + bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL); + if (bp->strm == NULL) + goto gunzip_nomem2; + + bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); + if (bp->strm->workspace == NULL) + goto gunzip_nomem3; + + return 0; + +gunzip_nomem3: + kfree(bp->strm); + bp->strm = NULL; + +gunzip_nomem2: + dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, + bp->gunzip_mapping); + bp->gunzip_buf = NULL; + +gunzip_nomem1: + BNX2X_ERR("Cannot allocate firmware buffer for un-compression\n"); + return -ENOMEM; +} + +static void bnx2x_gunzip_end(struct bnx2x *bp) +{ + if (bp->strm) { + vfree(bp->strm->workspace); + kfree(bp->strm); + bp->strm = NULL; + } + + if (bp->gunzip_buf) { + dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, + bp->gunzip_mapping); + bp->gunzip_buf = NULL; + } +} + +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) +{ + int n, rc; + + /* check gzip header */ + if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) { + BNX2X_ERR("Bad gzip header\n"); + return -EINVAL; + } + + n = 10; + +#define FNAME 0x8 + + if (zbuf[3] & FNAME) + while ((zbuf[n++] != 0) && (n < len)); + + bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n; + bp->strm->avail_in = len - n; + bp->strm->next_out = bp->gunzip_buf; + bp->strm->avail_out = FW_BUF_SIZE; + + rc = zlib_inflateInit2(bp->strm, -MAX_WBITS); + if (rc != Z_OK) + return rc; + + rc = zlib_inflate(bp->strm, Z_FINISH); + if ((rc != Z_OK) && (rc != Z_STREAM_END)) + netdev_err(bp->dev, "Firmware decompression error: %s\n", + bp->strm->msg); + + bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out); + if (bp->gunzip_outlen & 0x3) + netdev_err(bp->dev, + "Firmware decompression error: gunzip_outlen (%d) not aligned\n", + bp->gunzip_outlen); + bp->gunzip_outlen >>= 2; + + zlib_inflateEnd(bp->strm); + + if (rc == Z_STREAM_END) + return 0; + + return rc; +} + +/* nic load/unload */ + +/* + * General service functions + */ + +/* send a NIG loopback debug packet */ +static void bnx2x_lb_pckt(struct bnx2x *bp) +{ + u32 wb_write[3]; + + /* Ethernet source and destination addresses */ + wb_write[0] = 0x55555555; + wb_write[1] = 0x55555555; + wb_write[2] = 0x20; /* SOP */ + REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); + + /* NON-IP protocol */ + wb_write[0] = 0x09000000; + wb_write[1] = 0x55555555; + wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */ + REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); +} + +/* some of the internal memories + * are not directly readable from the driver + * to test them we send debug packets + */ +static int bnx2x_int_mem_test(struct bnx2x *bp) +{ + int factor; + int count, i; + u32 val = 0; + + if (CHIP_REV_IS_FPGA(bp)) + factor = 120; + else if (CHIP_REV_IS_EMUL(bp)) + factor = 200; + else + factor = 1; + + /* Disable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); + REG_WR(bp, CFC_REG_DEBUG0, 0x1); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); + + /* Write 0 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); + + /* send Ethernet packet */ + bnx2x_lb_pckt(bp); + + /* TODO do i reset NIG statistic? */ + /* Wait until NIG register shows 1 packet of size 0x10 */ + count = 1000 * factor; + while (count) { + + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + if (val == 0x10) + break; + + usleep_range(10000, 20000); + count--; + } + if (val != 0x10) { + BNX2X_ERR("NIG timeout val = 0x%x\n", val); + return -1; + } + + /* Wait until PRS register shows 1 packet */ + count = 1000 * factor; + while (count) { + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val == 1) + break; + + usleep_range(10000, 20000); + count--; + } + if (val != 0x1) { + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + return -2; + } + + /* Reset and init BRB, PRS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); + msleep(50); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); + msleep(50); + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + + DP(NETIF_MSG_HW, "part2\n"); + + /* Disable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); + REG_WR(bp, CFC_REG_DEBUG0, 0x1); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); + + /* Write 0 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); + + /* send 10 Ethernet packets */ + for (i = 0; i < 10; i++) + bnx2x_lb_pckt(bp); + + /* Wait until NIG register shows 10 + 1 + packets of size 11*0x10 = 0xb0 */ + count = 1000 * factor; + while (count) { + + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + if (val == 0xb0) + break; + + usleep_range(10000, 20000); + count--; + } + if (val != 0xb0) { + BNX2X_ERR("NIG timeout val = 0x%x\n", val); + return -3; + } + + /* Wait until PRS register shows 2 packets */ + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val != 2) + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + + /* Write 1 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1); + + /* Wait until PRS register shows 3 packets */ + msleep(10 * factor); + /* Wait until NIG register shows 1 packet of size 0x10 */ + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val != 3) + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + + /* clear NIG EOP FIFO */ + for (i = 0; i < 11; i++) + REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO); + val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY); + if (val != 1) { + BNX2X_ERR("clear of NIG failed\n"); + return -4; + } + + /* Reset and init BRB, PRS, NIG */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); + msleep(50); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); + msleep(50); + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + if (!CNIC_SUPPORT(bp)) + /* set NIC mode */ + REG_WR(bp, PRS_REG_NIC_MODE, 1); + + /* Enable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x1); + REG_WR(bp, CFC_REG_DEBUG0, 0x0); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1); + + DP(NETIF_MSG_HW, "done\n"); + + return 0; /* OK */ +} + +static void bnx2x_enable_blocks_attention(struct bnx2x *bp) +{ + u32 val; + + REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40); + else + REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0); + REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); + REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); + /* + * mask read length error interrupts in brb for parser + * (parsing unit and 'checksum and crc' unit) + * these errors are legal (PU reads fixed length and CAC can cause + * read length error on truncated packets) + */ + REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00); + REG_WR(bp, QM_REG_QM_INT_MASK, 0); + REG_WR(bp, TM_REG_TM_INT_MASK, 0); + REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0); + REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0); + REG_WR(bp, XCM_REG_XCM_INT_MASK, 0); +/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */ +/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */ + REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0); + REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0); + REG_WR(bp, UCM_REG_UCM_INT_MASK, 0); +/* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */ +/* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */ + REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0); + REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0); + REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0); + REG_WR(bp, CCM_REG_CCM_INT_MASK, 0); +/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */ +/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */ + + val = PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT | + PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF | + PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN; + if (!CHIP_IS_E1x(bp)) + val |= PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED | + PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED; + REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, val); + + REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0); + REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0); + REG_WR(bp, TCM_REG_TCM_INT_MASK, 0); +/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */ + + if (!CHIP_IS_E1x(bp)) + /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */ + REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff); + + REG_WR(bp, CDU_REG_CDU_INT_MASK, 0); + REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0); +/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */ + REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */ +} + +static void bnx2x_reset_common(struct bnx2x *bp) +{ + u32 val = 0x1400; + + /* reset_common */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffff7f); + + if (CHIP_IS_E3(bp)) { + val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val); +} + +static void bnx2x_setup_dmae(struct bnx2x *bp) +{ + bp->dmae_ready = 0; + spin_lock_init(&bp->dmae_lock); +} + +static void bnx2x_init_pxp(struct bnx2x *bp) +{ + u16 devctl; + int r_order, w_order; + + pcie_capability_read_word(bp->pdev, PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + if (bp->mrrs == -1) + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); + else { + DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); + r_order = bp->mrrs; + } + + bnx2x_init_pxp_arb(bp, r_order, w_order); +} + +static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) +{ + int is_required; + u32 val; + int port; + + if (BP_NOMCP(bp)) + return; + + is_required = 0; + val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) & + SHARED_HW_CFG_FAN_FAILURE_MASK; + + if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) + is_required = 1; + + /* + * The fan failure mechanism is usually related to the PHY type since + * the power consumption of the board is affected by the PHY. Currently, + * fan is required for most designs with SFX7101, BCM8727 and BCM8481. + */ + else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) + for (port = PORT_0; port < PORT_MAX; port++) { + is_required |= + bnx2x_fan_failure_det_req( + bp, + bp->common.shmem_base, + bp->common.shmem2_base, + port); + } + + DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required); + + if (is_required == 0) + return; + + /* Fan failure is indicated by SPIO 5 */ + bnx2x_set_spio(bp, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z); + + /* set to active low mode */ + val = REG_RD(bp, MISC_REG_SPIO_INT); + val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS); + REG_WR(bp, MISC_REG_SPIO_INT, val); + + /* enable interrupt to signal the IGU */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + val |= MISC_SPIO_SPIO5; + REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); +} + +void bnx2x_pf_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + val &= ~IGU_PF_CONF_FUNC_EN; + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0); +} + +static void bnx2x__common_init_phy(struct bnx2x *bp) +{ + u32 shmem_base[2], shmem2_base[2]; + /* Avoid common init in case MFW supports LFA */ + if (SHMEM2_RD(bp, size) > + (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) + return; + shmem_base[0] = bp->common.shmem_base; + shmem2_base[0] = bp->common.shmem2_base; + if (!CHIP_IS_E1x(bp)) { + shmem_base[1] = + SHMEM2_RD(bp, other_shmem_base_addr); + shmem2_base[1] = + SHMEM2_RD(bp, other_shmem2_base_addr); + } + bnx2x_acquire_phy_lock(bp); + bnx2x_common_init_phy(bp, shmem_base, shmem2_base, + bp->common.chip_id); + bnx2x_release_phy_lock(bp); +} + +static void bnx2x_config_endianity(struct bnx2x *bp, u32 val) +{ + REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, val); + REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, val); + + /* make sure this value is 0 */ + REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0); + + REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, val); + REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, val); + REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, val); + REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, val); +} + +static void bnx2x_set_endianity(struct bnx2x *bp) +{ +#ifdef __BIG_ENDIAN + bnx2x_config_endianity(bp, 1); +#else + bnx2x_config_endianity(bp, 0); +#endif +} + +static void bnx2x_reset_endianity(struct bnx2x *bp) +{ + bnx2x_config_endianity(bp, 0); +} + +/** + * bnx2x_init_hw_common - initialize the HW at the COMMON phase. + * + * @bp: driver handle + */ +static int bnx2x_init_hw_common(struct bnx2x *bp) +{ + u32 val; + + DP(NETIF_MSG_HW, "starting common init func %d\n", BP_ABS_FUNC(bp)); + + /* + * take the RESET lock to protect undi_unload flow from accessing + * registers while we're resetting the chip + */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + bnx2x_reset_common(bp); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); + + val = 0xfffc; + if (CHIP_IS_E3(bp)) { + val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + u8 abs_func_id; + + /** + * 4-port mode or 2-port mode we need to turn of master-enable + * for everyone, after that, turn it back on for self. + * so, we disregard multi-function or not, and always disable + * for all functions on the given path, this means 0,2,4,6 for + * path 0 and 1,3,5,7 for path 1 + */ + for (abs_func_id = BP_PATH(bp); + abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) { + if (abs_func_id == BP_ABS_FUNC(bp)) { + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, + 1); + continue; + } + + bnx2x_pretend_func(bp, abs_func_id); + /* clear pf enable */ + bnx2x_pf_disable(bp); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + } + } + + bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON); + if (CHIP_IS_E1(bp)) { + /* enable HW interrupt from PXP on USDM overflow + bit 16 on INT_MASK_0 */ + REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); + } + + bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON); + bnx2x_init_pxp(bp); + bnx2x_set_endianity(bp); + bnx2x_ilt_init_page_size(bp, INITOP_SET); + + if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp)) + REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1); + + /* let the HW do it's magic ... */ + msleep(100); + /* finish PXP init */ + val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE); + if (val != 1) { + BNX2X_ERR("PXP2 CFG failed\n"); + return -EBUSY; + } + val = REG_RD(bp, PXP2_REG_RD_INIT_DONE); + if (val != 1) { + BNX2X_ERR("PXP2 RD_INIT failed\n"); + return -EBUSY; + } + + /* Timers bug workaround E2 only. We need to set the entire ILT to + * have entries with value "0" and valid bit on. + * This needs to be done by the first PF that is loaded in a path + * (i.e. common phase) + */ + if (!CHIP_IS_E1x(bp)) { +/* In E2 there is a bug in the timers block that can cause function 6 / 7 + * (i.e. vnic3) to start even if it is marked as "scan-off". + * This occurs when a different function (func2,3) is being marked + * as "scan-off". Real-life scenario for example: if a driver is being + * load-unloaded while func6,7 are down. This will cause the timer to access + * the ilt, translate to a logical address and send a request to read/write. + * Since the ilt for the function that is down is not valid, this will cause + * a translation error which is unrecoverable. + * The Workaround is intended to make sure that when this happens nothing fatal + * will occur. The workaround: + * 1. First PF driver which loads on a path will: + * a. After taking the chip out of reset, by using pretend, + * it will write "0" to the following registers of + * the other vnics. + * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0); + * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0); + * And for itself it will write '1' to + * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable + * dmae-operations (writing to pram for example.) + * note: can be done for only function 6,7 but cleaner this + * way. + * b. Write zero+valid to the entire ILT. + * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of + * VNIC3 (of that port). The range allocated will be the + * entire ILT. This is needed to prevent ILT range error. + * 2. Any PF driver load flow: + * a. ILT update with the physical addresses of the allocated + * logical pages. + * b. Wait 20msec. - note that this timeout is needed to make + * sure there are no requests in one of the PXP internal + * queues with "old" ILT addresses. + * c. PF enable in the PGLC. + * d. Clear the was_error of the PF in the PGLC. (could have + * occurred while driver was down) + * e. PF enable in the CFC (WEAK + STRONG) + * f. Timers scan enable + * 3. PF driver unload flow: + * a. Clear the Timers scan_en. + * b. Polling for scan_on=0 for that PF. + * c. Clear the PF enable bit in the PXP. + * d. Clear the PF enable in the CFC (WEAK + STRONG) + * e. Write zero+valid to all ILT entries (The valid bit must + * stay set) + * f. If this is VNIC 3 of a port then also init + * first_timers_ilt_entry to zero and last_timers_ilt_entry + * to the last entry in the ILT. + * + * Notes: + * Currently the PF error in the PGLC is non recoverable. + * In the future the there will be a recovery routine for this error. + * Currently attention is masked. + * Having an MCP lock on the load/unload process does not guarantee that + * there is no Timer disable during Func6/7 enable. This is because the + * Timers scan is currently being cleared by the MCP on FLR. + * Step 2.d can be done only for PF6/7 and the driver can also check if + * there is error before clearing it. But the flow above is simpler and + * more general. + * All ILT entries are written by zero+valid and not just PF6/7 + * ILT entries since in the future the ILT entries allocation for + * PF-s might be dynamic. + */ + struct ilt_client_info ilt_cli; + struct bnx2x_ilt ilt; + memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); + memset(&ilt, 0, sizeof(struct bnx2x_ilt)); + + /* initialize dummy TM client */ + ilt_cli.start = 0; + ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; + ilt_cli.client_num = ILT_CLIENT_TM; + + /* Step 1: set zeroes to all ilt page entries with valid bit on + * Step 2: set the timers first/last ilt entry to point + * to the entire range to prevent ILT range error for 3rd/4th + * vnic (this code assumes existence of the vnic) + * + * both steps performed by call to bnx2x_ilt_client_init_op() + * with dummy TM client + * + * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT + * and his brother are split registers + */ + bnx2x_pretend_func(bp, (BP_PATH(bp) + 6)); + bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN); + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN); + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1); + } + + REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); + REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); + + if (!CHIP_IS_E1x(bp)) { + int factor = CHIP_REV_IS_EMUL(bp) ? 1000 : + (CHIP_REV_IS_FPGA(bp) ? 400 : 0); + bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON); + + /* let the HW do it's magic ... */ + do { + msleep(200); + val = REG_RD(bp, ATC_REG_ATC_INIT_DONE); + } while (factor-- && (val != 1)); + + if (val != 1) { + BNX2X_ERR("ATC_INIT failed\n"); + return -EBUSY; + } + } + + bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON); + + bnx2x_iov_init_dmae(bp); + + /* clean the DMAE memory */ + bp->dmae_ready = 1; + bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1); + + bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON); + + bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3); + + bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON); + + /* QM queues pointers table */ + bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET); + + /* soft reset pulse */ + REG_WR(bp, QM_REG_SOFT_RESET, 1); + REG_WR(bp, QM_REG_SOFT_RESET, 0); + + if (CNIC_SUPPORT(bp)) + bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON); + + if (!CHIP_REV_IS_SLOW(bp)) + /* enable hw interrupt from doorbell Q */ + REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); + + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); + + if (!CHIP_IS_E1(bp)) + REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan); + + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) { + if (IS_MF_AFEX(bp)) { + /* configure that VNTag and VLAN headers must be + * received in afex mode + */ + REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, 0xE); + REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, 0xA); + REG_WR(bp, PRS_REG_HDRS_AFTER_TAG_0, 0x6); + REG_WR(bp, PRS_REG_TAG_ETHERTYPE_0, 0x8926); + REG_WR(bp, PRS_REG_TAG_LEN_0, 0x4); + } else { + /* Bit-map indicating which L2 hdrs may appear + * after the basic Ethernet header + */ + REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, + bp->path_has_ovlan ? 7 : 6); + } + } + + bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + /* reset VFC memories */ + REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, + VFC_MEMORIES_RST_REG_CAM_RST | + VFC_MEMORIES_RST_REG_RAM_RST); + REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, + VFC_MEMORIES_RST_REG_CAM_RST | + VFC_MEMORIES_RST_REG_RAM_RST); + + msleep(20); + } + + bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON); + + /* sync semi rtc */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0x80000000); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0x80000000); + + bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + if (IS_MF_AFEX(bp)) { + /* configure that VNTag and VLAN headers must be + * sent in afex mode + */ + REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, 0xE); + REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, 0xA); + REG_WR(bp, PBF_REG_HDRS_AFTER_TAG_0, 0x6); + REG_WR(bp, PBF_REG_TAG_ETHERTYPE_0, 0x8926); + REG_WR(bp, PBF_REG_TAG_LEN_0, 0x4); + } else { + REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, + bp->path_has_ovlan ? 7 : 6); + } + } + + REG_WR(bp, SRC_REG_SOFT_RST, 1); + + bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON); + + if (CNIC_SUPPORT(bp)) { + REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672); + REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc); + REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b); + REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a); + REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116); + REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b); + REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf); + REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09); + REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f); + REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7); + } + REG_WR(bp, SRC_REG_SOFT_RST, 0); + + if (sizeof(union cdu_context) != 1024) + /* we currently assume that a context is 1024 bytes */ + dev_alert(&bp->pdev->dev, + "please adjust the size of cdu_context(%ld)\n", + (long)sizeof(union cdu_context)); + + bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON); + val = (4 << 24) + (0 << 12) + 1024; + REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val); + + bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON); + REG_WR(bp, CFC_REG_INIT_REG, 0x7FF); + /* enable context validation interrupt from CFC */ + REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); + + /* set the thresholds to prevent CFC/CDU race */ + REG_WR(bp, CFC_REG_DEBUG0, 0x20020000); + + bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp)) + REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36); + + bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON); + + /* Reset PCIE errors for debug */ + REG_WR(bp, 0x2814, 0xffffffff); + REG_WR(bp, 0x3820, 0xffffffff); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5, + (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 | + PXPCS_TL_CONTROL_5_ERR_UNSPPORT)); + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT, + (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 | + PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 | + PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2)); + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT, + (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 | + PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 | + PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5)); + } + + bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON); + if (!CHIP_IS_E1(bp)) { + /* in E3 this done in per-port section */ + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp)); + } + if (CHIP_IS_E1H(bp)) + /* not applicable for E2 (and above ...) */ + REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp)); + + if (CHIP_REV_IS_SLOW(bp)) + msleep(200); + + /* finish CFC init */ + val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC LL_INIT failed\n"); + return -EBUSY; + } + val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC AC_INIT failed\n"); + return -EBUSY; + } + val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC CAM_INIT failed\n"); + return -EBUSY; + } + REG_WR(bp, CFC_REG_DEBUG0, 0); + + if (CHIP_IS_E1(bp)) { + /* read NIG statistic + to see if this is our first up since powerup */ + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + + /* do internal memory self test */ + if ((val == 0) && bnx2x_int_mem_test(bp)) { + BNX2X_ERR("internal mem self test failed\n"); + return -EBUSY; + } + } + + bnx2x_setup_fan_failure_detection(bp); + + /* clear PXP2 attentions */ + REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0); + + bnx2x_enable_blocks_attention(bp); + bnx2x_enable_blocks_parity(bp); + + if (!BP_NOMCP(bp)) { + if (CHIP_IS_E1x(bp)) + bnx2x__common_init_phy(bp); + } else + BNX2X_ERR("Bootcode is missing - can not initialize link\n"); + + if (SHMEM2_HAS(bp, netproc_fw_ver)) + SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM)); + + return 0; +} + +/** + * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase. + * + * @bp: driver handle + */ +static int bnx2x_init_hw_common_chip(struct bnx2x *bp) +{ + int rc = bnx2x_init_hw_common(bp); + + if (rc) + return rc; + + /* In E2 2-PORT mode, same ext phy is used for the two paths */ + if (!BP_NOMCP(bp)) + bnx2x__common_init_phy(bp); + + return 0; +} + +static int bnx2x_init_hw_port(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; + u32 low, high; + u32 val, reg; + + DP(NETIF_MSG_HW, "starting port init port %d\n", port); + + REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); + + bnx2x_init_block(bp, BLOCK_MISC, init_phase); + bnx2x_init_block(bp, BLOCK_PXP, init_phase); + bnx2x_init_block(bp, BLOCK_PXP2, init_phase); + + /* Timers bug workaround: disables the pf_master bit in pglue at + * common phase, we need to enable it here before any dmae access are + * attempted. Therefore we manually added the enable-master to the + * port phase (it also happens in the function phase) + */ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + + bnx2x_init_block(bp, BLOCK_ATC, init_phase); + bnx2x_init_block(bp, BLOCK_DMAE, init_phase); + bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); + bnx2x_init_block(bp, BLOCK_QM, init_phase); + + bnx2x_init_block(bp, BLOCK_TCM, init_phase); + bnx2x_init_block(bp, BLOCK_UCM, init_phase); + bnx2x_init_block(bp, BLOCK_CCM, init_phase); + bnx2x_init_block(bp, BLOCK_XCM, init_phase); + + /* QM cid (connection) count */ + bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET); + + if (CNIC_SUPPORT(bp)) { + bnx2x_init_block(bp, BLOCK_TM, init_phase); + REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20); + REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31); + } + + bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { + + if (IS_MF(bp)) + low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); + else if (bp->dev->mtu > 4096) { + if (bp->flags & ONE_PORT_FLAG) + low = 160; + else { + val = bp->dev->mtu; + /* (24*1024 + val*4)/256 */ + low = 96 + (val/64) + + ((val % 64) ? 1 : 0); + } + } else + low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160); + high = low + 56; /* 14*1024/256 */ + REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low); + REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high); + } + + if (CHIP_MODE_IS_4_PORT(bp)) + REG_WR(bp, (BP_PORT(bp) ? + BRB1_REG_MAC_GUARANTIED_1 : + BRB1_REG_MAC_GUARANTIED_0), 40); + + bnx2x_init_block(bp, BLOCK_PRS, init_phase); + if (CHIP_IS_E3B0(bp)) { + if (IS_MF_AFEX(bp)) { + /* configure headers for AFEX mode */ + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_BASIC_PORT_1 : + PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE); + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_TAG_0_PORT_1 : + PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6); + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_MUST_HAVE_HDRS_PORT_1 : + PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA); + } else { + /* Ovlan exists only if we are in multi-function + + * switch-dependent mode, in switch-independent there + * is no ovlan headers + */ + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_BASIC_PORT_1 : + PRS_REG_HDRS_AFTER_BASIC_PORT_0, + (bp->path_has_ovlan ? 7 : 6)); + } + } + + bnx2x_init_block(bp, BLOCK_TSDM, init_phase); + bnx2x_init_block(bp, BLOCK_CSDM, init_phase); + bnx2x_init_block(bp, BLOCK_USDM, init_phase); + bnx2x_init_block(bp, BLOCK_XSDM, init_phase); + + bnx2x_init_block(bp, BLOCK_TSEM, init_phase); + bnx2x_init_block(bp, BLOCK_USEM, init_phase); + bnx2x_init_block(bp, BLOCK_CSEM, init_phase); + bnx2x_init_block(bp, BLOCK_XSEM, init_phase); + + bnx2x_init_block(bp, BLOCK_UPB, init_phase); + bnx2x_init_block(bp, BLOCK_XPB, init_phase); + + bnx2x_init_block(bp, BLOCK_PBF, init_phase); + + if (CHIP_IS_E1x(bp)) { + /* configure PBF to work without PAUSE mtu 9000 */ + REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); + + /* update threshold */ + REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16)); + /* update init credit */ + REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22); + + /* probe changes */ + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1); + udelay(50); + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0); + } + + if (CNIC_SUPPORT(bp)) + bnx2x_init_block(bp, BLOCK_SRC, init_phase); + + bnx2x_init_block(bp, BLOCK_CDU, init_phase); + bnx2x_init_block(bp, BLOCK_CFC, init_phase); + + if (CHIP_IS_E1(bp)) { + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } + bnx2x_init_block(bp, BLOCK_HC, init_phase); + + bnx2x_init_block(bp, BLOCK_IGU, init_phase); + + bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); + /* init aeu_mask_attn_func_0/1: + * - SF mode: bits 3-7 are masked. Only bits 0-2 are in use + * - MF mode: bit 3 is masked. Bits 0-2 are in use as in SF + * bits 4-7 are used for "per vn group attention" */ + val = IS_MF(bp) ? 0xF7 : 0x7; + /* Enable DCBX attention for all but E1 */ + val |= CHIP_IS_E1(bp) ? 0 : 0x10; + REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); + + /* SCPAD_PARITY should NOT trigger close the gates */ + reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + + reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + + bnx2x_init_block(bp, BLOCK_NIG, init_phase); + + if (!CHIP_IS_E1x(bp)) { + /* Bit-map indicating which L2 hdrs may appear after the + * basic Ethernet header + */ + if (IS_MF_AFEX(bp)) + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_P1_HDRS_AFTER_BASIC : + NIG_REG_P0_HDRS_AFTER_BASIC, 0xE); + else + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_P1_HDRS_AFTER_BASIC : + NIG_REG_P0_HDRS_AFTER_BASIC, + IS_MF_SD(bp) ? 7 : 6); + + if (CHIP_IS_E3(bp)) + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_LLH1_MF_MODE : + NIG_REG_LLH_MF_MODE, IS_MF(bp)); + } + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); + + if (!CHIP_IS_E1(bp)) { + /* 0x2 disable mf_ov, 0x1 enable */ + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4, + (IS_MF_SD(bp) ? 0x1 : 0x2)); + + if (!CHIP_IS_E1x(bp)) { + val = 0; + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + val = 1; + break; + case MULTI_FUNCTION_SI: + case MULTI_FUNCTION_AFEX: + val = 2; + break; + } + + REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE : + NIG_REG_LLH0_CLS_TYPE), val); + } + { + REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0); + REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0); + REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1); + } + } + + /* If SPIO5 is set to generate interrupts, enable it for this port */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + if (val & MISC_SPIO_SPIO5) { + u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val = REG_RD(bp, reg_addr); + val |= AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_addr, val); + } + + return 0; +} + +static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr) +{ + int reg; + u32 wb_write[2]; + + if (CHIP_IS_E1(bp)) + reg = PXP2_REG_RQ_ONCHIP_AT + index*8; + else + reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8; + + wb_write[0] = ONCHIP_ADDR1(addr); + wb_write[1] = ONCHIP_ADDR2(addr); + REG_WR_DMAE(bp, reg, wb_write, 2); +} + +void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf) +{ + u32 data, ctl, cnt = 100; + u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; + u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; + u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4; + u32 sb_bit = 1 << (idu_sb_id%32); + u32 func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT; + u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id; + + /* Not supported in BC mode */ + if (CHIP_INT_MODE_IS_BC(bp)) + return; + + data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup + << IGU_REGULAR_CLEANUP_TYPE_SHIFT) | + IGU_REGULAR_CLEANUP_SET | + IGU_REGULAR_BCLEANUP; + + ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | + func_encode << IGU_CTRL_REG_FID_SHIFT | + IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; + + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + data, igu_addr_data); + REG_WR(bp, igu_addr_data, data); + mmiowb(); + barrier(); + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + ctl, igu_addr_ctl); + REG_WR(bp, igu_addr_ctl, ctl); + mmiowb(); + barrier(); + + /* wait for clean up to finish */ + while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt) + msleep(20); + + if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) { + DP(NETIF_MSG_HW, + "Unable to finish IGU cleanup: idu_sb_id %d offset %d bit %d (cnt %d)\n", + idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt); + } +} + +static void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id) +{ + bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/); +} + +static void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func) +{ + u32 i, base = FUNC_ILT_BASE(func); + for (i = base; i < base + ILT_PER_FUNC; i++) + bnx2x_ilt_wr(bp, i, 0); +} + +static void bnx2x_init_searcher(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM); + /* T1 hash bits value determines the T1 number of entries */ + REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS); +} + +static inline int bnx2x_func_switch_update(struct bnx2x *bp, int suspend) +{ + int rc; + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_switch_update_params *switch_update_params = + &func_params.params.switch_update; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; + + /* Function parameters */ + __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, + &switch_update_params->changes); + if (suspend) + __set_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, + &switch_update_params->changes); + + rc = bnx2x_func_state_change(bp, &func_params); + + return rc; +} + +static int bnx2x_reset_nic_mode(struct bnx2x *bp) +{ + int rc, i, port = BP_PORT(bp); + int vlan_en = 0, mac_en[NUM_MACS]; + + /* Close input from network */ + if (bp->mf_mode == SINGLE_FUNCTION) { + bnx2x_set_rx_filter(&bp->link_params, 0); + } else { + vlan_en = REG_RD(bp, port ? NIG_REG_LLH1_FUNC_EN : + NIG_REG_LLH0_FUNC_EN); + REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : + NIG_REG_LLH0_FUNC_EN, 0); + for (i = 0; i < NUM_MACS; i++) { + mac_en[i] = REG_RD(bp, port ? + (NIG_REG_LLH1_FUNC_MEM_ENABLE + + 4 * i) : + (NIG_REG_LLH0_FUNC_MEM_ENABLE + + 4 * i)); + REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + + 4 * i) : + (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), 0); + } + } + + /* Close BMC to host */ + REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : + NIG_REG_P1_TX_MNG_HOST_ENABLE, 0); + + /* Suspend Tx switching to the PF. Completion of this ramrod + * further guarantees that all the packets of that PF / child + * VFs in BRB were processed by the Parser, so it is safe to + * change the NIC_MODE register. + */ + rc = bnx2x_func_switch_update(bp, 1); + if (rc) { + BNX2X_ERR("Can't suspend tx-switching!\n"); + return rc; + } + + /* Change NIC_MODE register */ + REG_WR(bp, PRS_REG_NIC_MODE, 0); + + /* Open input from network */ + if (bp->mf_mode == SINGLE_FUNCTION) { + bnx2x_set_rx_filter(&bp->link_params, 1); + } else { + REG_WR(bp, port ? NIG_REG_LLH1_FUNC_EN : + NIG_REG_LLH0_FUNC_EN, vlan_en); + for (i = 0; i < NUM_MACS; i++) { + REG_WR(bp, port ? (NIG_REG_LLH1_FUNC_MEM_ENABLE + + 4 * i) : + (NIG_REG_LLH0_FUNC_MEM_ENABLE + 4 * i), + mac_en[i]); + } + } + + /* Enable BMC to host */ + REG_WR(bp, port ? NIG_REG_P0_TX_MNG_HOST_ENABLE : + NIG_REG_P1_TX_MNG_HOST_ENABLE, 1); + + /* Resume Tx switching to the PF */ + rc = bnx2x_func_switch_update(bp, 0); + if (rc) { + BNX2X_ERR("Can't resume tx-switching!\n"); + return rc; + } + + DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); + return 0; +} + +int bnx2x_init_hw_func_cnic(struct bnx2x *bp) +{ + int rc; + + bnx2x_ilt_init_op_cnic(bp, INITOP_SET); + + if (CONFIGURE_NIC_MODE(bp)) { + /* Configure searcher as part of function hw init */ + bnx2x_init_searcher(bp); + + /* Reset NIC mode */ + rc = bnx2x_reset_nic_mode(bp); + if (rc) + BNX2X_ERR("Can't change NIC mode!\n"); + return rc; + } + + return 0; +} + +/* previous driver DMAE transaction may have occurred when pre-boot stage ended + * and boot began, or when kdump kernel was loaded. Either case would invalidate + * the addresses of the transaction, resulting in was-error bit set in the pci + * causing all hw-to-host pcie transactions to timeout. If this happened we want + * to clear the interrupt which detected this from the pglueb and the was done + * bit + */ +static void bnx2x_clean_pglue_errors(struct bnx2x *bp) +{ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, + 1 << BP_ABS_FUNC(bp)); +} + +static int bnx2x_init_hw_func(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int init_phase = PHASE_PF0 + func; + struct bnx2x_ilt *ilt = BP_ILT(bp); + u16 cdu_ilt_start; + u32 addr, val; + u32 main_mem_base, main_mem_size, main_mem_prty_clr; + int i, main_mem_width, rc; + + DP(NETIF_MSG_HW, "starting func init func %d\n", func); + + /* FLR cleanup - hmmm */ + if (!CHIP_IS_E1x(bp)) { + rc = bnx2x_pf_flr_clnup(bp); + if (rc) { + bnx2x_fw_dump(bp); + return rc; + } + } + + /* set MSI reconfigure capability */ + if (bp->common.int_block == INT_BLOCK_HC) { + addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0); + val = REG_RD(bp, addr); + val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0; + REG_WR(bp, addr, val); + } + + bnx2x_init_block(bp, BLOCK_PXP, init_phase); + bnx2x_init_block(bp, BLOCK_PXP2, init_phase); + + ilt = BP_ILT(bp); + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + + if (IS_SRIOV(bp)) + cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS; + cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start); + + /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes + * those of the VFs, so start line should be reset + */ + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + for (i = 0; i < L2_ILT_LINES(bp); i++) { + ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt; + ilt->lines[cdu_ilt_start + i].page_mapping = + bp->context[i].cxt_mapping; + ilt->lines[cdu_ilt_start + i].size = bp->context[i].size; + } + + bnx2x_ilt_init_op(bp, INITOP_SET); + + if (!CONFIGURE_NIC_MODE(bp)) { + bnx2x_init_searcher(bp); + REG_WR(bp, PRS_REG_NIC_MODE, 0); + DP(NETIF_MSG_IFUP, "NIC MODE disabled\n"); + } else { + /* Set NIC mode */ + REG_WR(bp, PRS_REG_NIC_MODE, 1); + DP(NETIF_MSG_IFUP, "NIC MODE configured\n"); + } + + if (!CHIP_IS_E1x(bp)) { + u32 pf_conf = IGU_PF_CONF_FUNC_EN; + + /* Turn on a single ISR mode in IGU if driver is going to use + * INT#x or MSI + */ + if (!(bp->flags & USING_MSIX_FLAG)) + pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN; + /* + * Timers workaround bug: function init part. + * Need to wait 20msec after initializing ILT, + * needed to make sure there are no requests in + * one of the PXP internal queues with "old" ILT addresses + */ + msleep(20); + /* + * Master enable - Due to WB DMAE writes performed before this + * register is re-initialized as part of the regular function + * init + */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + /* Enable the function in IGU */ + REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf); + } + + bp->dmae_ready = 1; + + bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); + + bnx2x_clean_pglue_errors(bp); + + bnx2x_init_block(bp, BLOCK_ATC, init_phase); + bnx2x_init_block(bp, BLOCK_DMAE, init_phase); + bnx2x_init_block(bp, BLOCK_NIG, init_phase); + bnx2x_init_block(bp, BLOCK_SRC, init_phase); + bnx2x_init_block(bp, BLOCK_MISC, init_phase); + bnx2x_init_block(bp, BLOCK_TCM, init_phase); + bnx2x_init_block(bp, BLOCK_UCM, init_phase); + bnx2x_init_block(bp, BLOCK_CCM, init_phase); + bnx2x_init_block(bp, BLOCK_XCM, init_phase); + bnx2x_init_block(bp, BLOCK_TSEM, init_phase); + bnx2x_init_block(bp, BLOCK_USEM, init_phase); + bnx2x_init_block(bp, BLOCK_CSEM, init_phase); + bnx2x_init_block(bp, BLOCK_XSEM, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, QM_REG_PF_EN, 1); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + } + bnx2x_init_block(bp, BLOCK_QM, init_phase); + + bnx2x_init_block(bp, BLOCK_TM, init_phase); + bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + REG_WR(bp, DORQ_REG_MODE_ACT, 1); /* no dpm */ + + bnx2x_iov_init_dq(bp); + + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + bnx2x_init_block(bp, BLOCK_PRS, init_phase); + bnx2x_init_block(bp, BLOCK_TSDM, init_phase); + bnx2x_init_block(bp, BLOCK_CSDM, init_phase); + bnx2x_init_block(bp, BLOCK_USDM, init_phase); + bnx2x_init_block(bp, BLOCK_XSDM, init_phase); + bnx2x_init_block(bp, BLOCK_UPB, init_phase); + bnx2x_init_block(bp, BLOCK_XPB, init_phase); + bnx2x_init_block(bp, BLOCK_PBF, init_phase); + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PBF_REG_DISABLE_PF, 0); + + bnx2x_init_block(bp, BLOCK_CDU, init_phase); + + bnx2x_init_block(bp, BLOCK_CFC, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1); + + if (IS_MF(bp)) { + if (!(IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) { + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port * 8, 1); + REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, + bp->mf_ov); + } + } + + bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); + + /* HC init per function */ + if (bp->common.int_block == INT_BLOCK_HC) { + if (CHIP_IS_E1H(bp)) { + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } + bnx2x_init_block(bp, BLOCK_HC, init_phase); + + } else { + int num_segs, sb_idx, prod_offset; + + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); + } + + bnx2x_init_block(bp, BLOCK_IGU, init_phase); + + if (!CHIP_IS_E1x(bp)) { + int dsb_idx = 0; + /** + * Producer memory: + * E2 mode: address 0-135 match to the mapping memory; + * 136 - PF0 default prod; 137 - PF1 default prod; + * 138 - PF2 default prod; 139 - PF3 default prod; + * 140 - PF0 attn prod; 141 - PF1 attn prod; + * 142 - PF2 attn prod; 143 - PF3 attn prod; + * 144-147 reserved. + * + * E1.5 mode - In backward compatible mode; + * for non default SB; each even line in the memory + * holds the U producer and each odd line hold + * the C producer. The first 128 producers are for + * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20 + * producers are for the DSB for each PF. + * Each PF has five segments: (the order inside each + * segment is PF0; PF1; PF2; PF3) - 128-131 U prods; + * 132-135 C prods; 136-139 X prods; 140-143 T prods; + * 144-147 attn prods; + */ + /* non-default-status-blocks */ + num_segs = CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS; + for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) { + prod_offset = (bp->igu_base_sb + sb_idx) * + num_segs; + + for (i = 0; i < num_segs; i++) { + addr = IGU_REG_PROD_CONS_MEMORY + + (prod_offset + i) * 4; + REG_WR(bp, addr, 0); + } + /* send consumer update with value 0 */ + bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_igu_clear_sb(bp, + bp->igu_base_sb + sb_idx); + } + + /* default-status-blocks */ + num_segs = CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS; + + if (CHIP_MODE_IS_4_PORT(bp)) + dsb_idx = BP_FUNC(bp); + else + dsb_idx = BP_VN(bp); + + prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_BASE_DSB_PROD + dsb_idx : + IGU_NORM_BASE_DSB_PROD + dsb_idx); + + /* + * igu prods come in chunks of E1HVN_MAX (4) - + * does not matters what is the current chip mode + */ + for (i = 0; i < (num_segs * E1HVN_MAX); + i += E1HVN_MAX) { + addr = IGU_REG_PROD_CONS_MEMORY + + (prod_offset + i)*4; + REG_WR(bp, addr, 0); + } + /* send consumer update with 0 */ + if (CHIP_INT_MODE_IS_BC(bp)) { + bnx2x_ack_sb(bp, bp->igu_dsb_id, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + CSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + XSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + TSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + ATTENTION_ID, 0, IGU_INT_NOP, 1); + } else { + bnx2x_ack_sb(bp, bp->igu_dsb_id, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + ATTENTION_ID, 0, IGU_INT_NOP, 1); + } + bnx2x_igu_clear_sb(bp, bp->igu_dsb_id); + + /* !!! These should become driver const once + rf-tool supports split-68 const */ + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); + } + } + + /* Reset PCIE errors for debug */ + REG_WR(bp, 0x2114, 0xffffffff); + REG_WR(bp, 0x2120, 0xffffffff); + + if (CHIP_IS_E1x(bp)) { + main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/ + main_mem_base = HC_REG_MAIN_MEMORY + + BP_PORT(bp) * (main_mem_size * 4); + main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR; + main_mem_width = 8; + + val = REG_RD(bp, main_mem_prty_clr); + if (val) + DP(NETIF_MSG_HW, + "Hmmm... Parity errors in HC block during function init (0x%x)!\n", + val); + + /* Clear "false" parity errors in MSI-X table */ + for (i = main_mem_base; + i < main_mem_base + main_mem_size * 4; + i += main_mem_width) { + bnx2x_read_dmae(bp, i, main_mem_width / 4); + bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), + i, main_mem_width / 4); + } + /* Clear HC parity attention */ + REG_RD(bp, main_mem_prty_clr); + } + +#ifdef BNX2X_STOP_ON_ERROR + /* Enable STORMs SP logging */ + REG_WR8(bp, BAR_USTRORM_INTMEM + + USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_TSTRORM_INTMEM + + TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_XSTRORM_INTMEM + + XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); +#endif + + bnx2x_phy_probe(&bp->link_params); + + return 0; +} + +void bnx2x_free_mem_cnic(struct bnx2x *bp) +{ + bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_FREE); + + if (!CHIP_IS_E1x(bp)) + BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e1x)); + + BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); +} + +void bnx2x_free_mem(struct bnx2x *bp) +{ + int i; + + BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + + if (IS_VF(bp)) + return; + + BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping, + sizeof(struct host_sp_status_block)); + + BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping, + sizeof(struct bnx2x_slowpath)); + + for (i = 0; i < L2_ILT_LINES(bp); i++) + BNX2X_PCI_FREE(bp->context[i].vcxt, bp->context[i].cxt_mapping, + bp->context[i].size); + bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE); + + BNX2X_FREE(bp->ilt->lines); + + BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE); + + BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping, + BCM_PAGE_SIZE * NUM_EQ_PAGES); + + BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); + + bnx2x_iov_free_mem(bp); +} + +int bnx2x_alloc_mem_cnic(struct bnx2x *bp) +{ + if (!CHIP_IS_E1x(bp)) { + /* size = the status block + ramrod buffers */ + bp->cnic_sb.e2_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e2)); + if (!bp->cnic_sb.e2_sb) + goto alloc_mem_err; + } else { + bp->cnic_sb.e1x_sb = BNX2X_PCI_ALLOC(&bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e1x)); + if (!bp->cnic_sb.e1x_sb) + goto alloc_mem_err; + } + + if (CONFIGURE_NIC_MODE(bp) && !bp->t2) { + /* allocate searcher T2 table, as it wasn't allocated before */ + bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); + if (!bp->t2) + goto alloc_mem_err; + } + + /* write address to which L5 should insert its values */ + bp->cnic_eth_dev.addr_drv_info_to_mcp = + &bp->slowpath->drv_info_to_mcp; + + if (bnx2x_ilt_mem_op_cnic(bp, ILT_MEMOP_ALLOC)) + goto alloc_mem_err; + + return 0; + +alloc_mem_err: + bnx2x_free_mem_cnic(bp); + BNX2X_ERR("Can't allocate memory\n"); + return -ENOMEM; +} + +int bnx2x_alloc_mem(struct bnx2x *bp) +{ + int i, allocated, context_size; + + if (!CONFIGURE_NIC_MODE(bp) && !bp->t2) { + /* allocate searcher T2 table */ + bp->t2 = BNX2X_PCI_ALLOC(&bp->t2_mapping, SRC_T2_SZ); + if (!bp->t2) + goto alloc_mem_err; + } + + bp->def_status_blk = BNX2X_PCI_ALLOC(&bp->def_status_blk_mapping, + sizeof(struct host_sp_status_block)); + if (!bp->def_status_blk) + goto alloc_mem_err; + + bp->slowpath = BNX2X_PCI_ALLOC(&bp->slowpath_mapping, + sizeof(struct bnx2x_slowpath)); + if (!bp->slowpath) + goto alloc_mem_err; + + /* Allocate memory for CDU context: + * This memory is allocated separately and not in the generic ILT + * functions because CDU differs in few aspects: + * 1. There are multiple entities allocating memory for context - + * 'regular' driver, CNIC and SRIOV driver. Each separately controls + * its own ILT lines. + * 2. Since CDU page-size is not a single 4KB page (which is the case + * for the other ILT clients), to be efficient we want to support + * allocation of sub-page-size in the last entry. + * 3. Context pointers are used by the driver to pass to FW / update + * the context (for the other ILT clients the pointers are used just to + * free the memory during unload). + */ + context_size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp); + + for (i = 0, allocated = 0; allocated < context_size; i++) { + bp->context[i].size = min(CDU_ILT_PAGE_SZ, + (context_size - allocated)); + bp->context[i].vcxt = BNX2X_PCI_ALLOC(&bp->context[i].cxt_mapping, + bp->context[i].size); + if (!bp->context[i].vcxt) + goto alloc_mem_err; + allocated += bp->context[i].size; + } + bp->ilt->lines = kcalloc(ILT_MAX_LINES, sizeof(struct ilt_line), + GFP_KERNEL); + if (!bp->ilt->lines) + goto alloc_mem_err; + + if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC)) + goto alloc_mem_err; + + if (bnx2x_iov_alloc_mem(bp)) + goto alloc_mem_err; + + /* Slow path ring */ + bp->spq = BNX2X_PCI_ALLOC(&bp->spq_mapping, BCM_PAGE_SIZE); + if (!bp->spq) + goto alloc_mem_err; + + /* EQ */ + bp->eq_ring = BNX2X_PCI_ALLOC(&bp->eq_mapping, + BCM_PAGE_SIZE * NUM_EQ_PAGES); + if (!bp->eq_ring) + goto alloc_mem_err; + + return 0; + +alloc_mem_err: + bnx2x_free_mem(bp); + BNX2X_ERR("Can't allocate memory\n"); + return -ENOMEM; +} + +/* + * Init service functions + */ + +int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, + struct bnx2x_vlan_mac_obj *obj, bool set, + int mac_type, unsigned long *ramrod_flags) +{ + int rc; + struct bnx2x_vlan_mac_ramrod_params ramrod_param; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Fill general parameters */ + ramrod_param.vlan_mac_obj = obj; + ramrod_param.ramrod_flags = *ramrod_flags; + + /* Fill a user request section if needed */ + if (!test_bit(RAMROD_CONT, ramrod_flags)) { + memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN); + + __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags); + + /* Set the command: ADD or DEL */ + if (set) + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; + else + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; + } + + rc = bnx2x_config_vlan_mac(bp, &ramrod_param); + + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + } else if (rc < 0) + BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); + + return rc; +} + +int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, + struct bnx2x_vlan_mac_obj *obj, bool set, + unsigned long *ramrod_flags) +{ + int rc; + struct bnx2x_vlan_mac_ramrod_params ramrod_param; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Fill general parameters */ + ramrod_param.vlan_mac_obj = obj; + ramrod_param.ramrod_flags = *ramrod_flags; + + /* Fill a user request section if needed */ + if (!test_bit(RAMROD_CONT, ramrod_flags)) { + ramrod_param.user_req.u.vlan.vlan = vlan; + __set_bit(BNX2X_VLAN, &ramrod_param.user_req.vlan_mac_flags); + /* Set the command: ADD or DEL */ + if (set) + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; + else + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; + } + + rc = bnx2x_config_vlan_mac(bp, &ramrod_param); + + if (rc == -EEXIST) { + /* Do not treat adding same vlan as error. */ + DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); + rc = 0; + } else if (rc < 0) { + BNX2X_ERR("%s VLAN failed\n", (set ? "Set" : "Del")); + } + + return rc; +} + +void bnx2x_clear_vlan_info(struct bnx2x *bp) +{ + struct bnx2x_vlan_entry *vlan; + + /* Mark that hw forgot all entries */ + list_for_each_entry(vlan, &bp->vlan_reg, link) + vlan->hw = false; + + bp->vlan_cnt = 0; +} + +static int bnx2x_del_all_vlans(struct bnx2x *bp) +{ + struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj; + unsigned long ramrod_flags = 0, vlan_flags = 0; + int rc; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + __set_bit(BNX2X_VLAN, &vlan_flags); + rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_flags, &ramrod_flags); + if (rc) + return rc; + + bnx2x_clear_vlan_info(bp); + + return 0; +} + +int bnx2x_del_all_macs(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + int mac_type, bool wait_for_comp) +{ + int rc; + unsigned long ramrod_flags = 0, vlan_mac_flags = 0; + + /* Wait for completion of requested */ + if (wait_for_comp) + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + + /* Set the mac type of addresses we want to clear */ + __set_bit(mac_type, &vlan_mac_flags); + + rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags); + if (rc < 0) + BNX2X_ERR("Failed to delete MACs: %d\n", rc); + + return rc; +} + +int bnx2x_set_eth_mac(struct bnx2x *bp, bool set) +{ + if (IS_PF(bp)) { + unsigned long ramrod_flags = 0; + + DP(NETIF_MSG_IFUP, "Adding Eth MAC\n"); + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + return bnx2x_set_mac_one(bp, bp->dev->dev_addr, + &bp->sp_objs->mac_obj, set, + BNX2X_ETH_MAC, &ramrod_flags); + } else { /* vf */ + return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, + bp->fp->index, set); + } +} + +int bnx2x_setup_leading(struct bnx2x *bp) +{ + if (IS_PF(bp)) + return bnx2x_setup_queue(bp, &bp->fp[0], true); + else /* VF */ + return bnx2x_vfpf_setup_q(bp, &bp->fp[0], true); +} + +/** + * bnx2x_set_int_mode - configure interrupt mode + * + * @bp: driver handle + * + * In case of MSI-X it will also try to enable MSI-X. + */ +int bnx2x_set_int_mode(struct bnx2x *bp) +{ + int rc = 0; + + if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX) { + BNX2X_ERR("VF not loaded since interrupt mode not msix\n"); + return -EINVAL; + } + + switch (int_mode) { + case BNX2X_INT_MODE_MSIX: + /* attempt to enable msix */ + rc = bnx2x_enable_msix(bp); + + /* msix attained */ + if (!rc) + return 0; + + /* vfs use only msix */ + if (rc && IS_VF(bp)) + return rc; + + /* failed to enable multiple MSI-X */ + BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n", + bp->num_queues, + 1 + bp->num_cnic_queues); + + /* fall through */ + case BNX2X_INT_MODE_MSI: + bnx2x_enable_msi(bp); + + /* fall through */ + case BNX2X_INT_MODE_INTX: + bp->num_ethernet_queues = 1; + bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues; + BNX2X_DEV_INFO("set number of queues to 1\n"); + break; + default: + BNX2X_DEV_INFO("unknown value in int_mode module parameter\n"); + return -EINVAL; + } + return 0; +} + +/* must be called prior to any HW initializations */ +static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) +{ + if (IS_SRIOV(bp)) + return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS; + return L2_ILT_LINES(bp); +} + +void bnx2x_ilt_set_info(struct bnx2x *bp) +{ + struct ilt_client_info *ilt_client; + struct bnx2x_ilt *ilt = BP_ILT(bp); + u16 line = 0; + + ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp)); + DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line); + + /* CDU */ + ilt_client = &ilt->clients[ILT_CLIENT_CDU]; + ilt_client->client_num = ILT_CLIENT_CDU; + ilt_client->page_size = CDU_ILT_PAGE_SZ; + ilt_client->flags = ILT_CLIENT_SKIP_MEM; + ilt_client->start = line; + line += bnx2x_cid_ilt_lines(bp); + + if (CNIC_SUPPORT(bp)) + line += CNIC_ILT_LINES; + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, "ilt client[CDU]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + + /* QM */ + if (QM_INIT(bp->qm_cid_count)) { + ilt_client = &ilt->clients[ILT_CLIENT_QM]; + ilt_client->client_num = ILT_CLIENT_QM; + ilt_client->page_size = QM_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + + /* 4 bytes for each cid */ + line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4, + QM_ILT_PAGE_SZ); + + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, + "ilt client[QM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + } + + if (CNIC_SUPPORT(bp)) { + /* SRC */ + ilt_client = &ilt->clients[ILT_CLIENT_SRC]; + ilt_client->client_num = ILT_CLIENT_SRC; + ilt_client->page_size = SRC_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + line += SRC_ILT_LINES; + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, + "ilt client[SRC]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + + /* TM */ + ilt_client = &ilt->clients[ILT_CLIENT_TM]; + ilt_client->client_num = ILT_CLIENT_TM; + ilt_client->page_size = TM_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + line += TM_ILT_LINES; + ilt_client->end = line - 1; + + DP(NETIF_MSG_IFUP, + "ilt client[TM]: start %d, end %d, psz 0x%x, flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + } + + BUG_ON(line > ILT_MAX_LINES); +} + +/** + * bnx2x_pf_q_prep_init - prepare INIT transition parameters + * + * @bp: driver handle + * @fp: pointer to fastpath + * @init_params: pointer to parameters structure + * + * parameters configured: + * - HC configuration + * - Queue's CDU context + */ +static void bnx2x_pf_q_prep_init(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params) +{ + u8 cos; + int cxt_index, cxt_offset; + + /* FCoE Queue uses Default SB, thus has no HC capabilities */ + if (!IS_FCOE_FP(fp)) { + __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags); + __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags); + + /* If HC is supported, enable host coalescing in the transition + * to INIT state. + */ + __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags); + __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags); + + /* HC rate */ + init_params->rx.hc_rate = bp->rx_ticks ? + (1000000 / bp->rx_ticks) : 0; + init_params->tx.hc_rate = bp->tx_ticks ? + (1000000 / bp->tx_ticks) : 0; + + /* FW SB ID */ + init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = + fp->fw_sb_id; + + /* + * CQ index among the SB indices: FCoE clients uses the default + * SB, therefore it's different. + */ + init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; + init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS; + } + + /* set maximum number of COSs supported by this queue */ + init_params->max_cos = fp->max_cos; + + DP(NETIF_MSG_IFUP, "fp: %d setting queue params max cos to: %d\n", + fp->index, init_params->max_cos); + + /* set the context pointers queue object */ + for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) { + cxt_index = fp->txdata_ptr[cos]->cid / ILT_PAGE_CIDS; + cxt_offset = fp->txdata_ptr[cos]->cid - (cxt_index * + ILT_PAGE_CIDS); + init_params->cxts[cos] = + &bp->context[cxt_index].vcxt[cxt_offset].eth; + } +} + +static int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct bnx2x_queue_state_params *q_params, + struct bnx2x_queue_setup_tx_only_params *tx_only_params, + int tx_index, bool leading) +{ + memset(tx_only_params, 0, sizeof(*tx_only_params)); + + /* Set the command */ + q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; + + /* Set tx-only QUEUE flags: don't zero statistics */ + tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false); + + /* choose the index of the cid to send the slow path on */ + tx_only_params->cid_index = tx_index; + + /* Set general TX_ONLY_SETUP parameters */ + bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index); + + /* Set Tx TX_ONLY_SETUP parameters */ + bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index); + + DP(NETIF_MSG_IFUP, + "preparing to send tx-only ramrod for connection: cos %d, primary cid %d, cid %d, client id %d, sp-client id %d, flags %lx\n", + tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX], + q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id, + tx_only_params->gen_params.spcl_id, tx_only_params->flags); + + /* send the ramrod */ + return bnx2x_queue_state_change(bp, q_params); +} + +/** + * bnx2x_setup_queue - setup queue + * + * @bp: driver handle + * @fp: pointer to fastpath + * @leading: is leading + * + * This function performs 2 steps in a Queue state machine + * actually: 1) RESET->INIT 2) INIT->SETUP + */ + +int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, + bool leading) +{ + struct bnx2x_queue_state_params q_params = {NULL}; + struct bnx2x_queue_setup_params *setup_params = + &q_params.params.setup; + struct bnx2x_queue_setup_tx_only_params *tx_only_params = + &q_params.params.tx_only; + int rc; + u8 tx_index; + + DP(NETIF_MSG_IFUP, "setting up queue %d\n", fp->index); + + /* reset IGU state skip FCoE L2 queue */ + if (!IS_FCOE_FP(fp)) + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, + IGU_INT_ENABLE, 0); + + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + /* We want to wait for completion in this context */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + /* Prepare the INIT parameters */ + bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init); + + /* Set the command */ + q_params.cmd = BNX2X_Q_CMD_INIT; + + /* Change the state to INIT */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Queue(%d) INIT failed\n", fp->index); + return rc; + } + + DP(NETIF_MSG_IFUP, "init complete\n"); + + /* Now move the Queue to the SETUP state... */ + memset(setup_params, 0, sizeof(*setup_params)); + + /* Set QUEUE flags */ + setup_params->flags = bnx2x_get_q_flags(bp, fp, leading); + + /* Set general SETUP parameters */ + bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params, + FIRST_TX_COS_INDEX); + + bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params, + &setup_params->rxq_params); + + bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params, + FIRST_TX_COS_INDEX); + + /* Set the command */ + q_params.cmd = BNX2X_Q_CMD_SETUP; + + if (IS_FCOE_FP(fp)) + bp->fcoe_init = true; + + /* Change the state to SETUP */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index); + return rc; + } + + /* loop through the relevant tx-only indices */ + for (tx_index = FIRST_TX_ONLY_COS_INDEX; + tx_index < fp->max_cos; + tx_index++) { + + /* prepare and send tx-only ramrod*/ + rc = bnx2x_setup_tx_only(bp, fp, &q_params, + tx_only_params, tx_index, leading); + if (rc) { + BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n", + fp->index, tx_index); + return rc; + } + } + + return rc; +} + +static int bnx2x_stop_queue(struct bnx2x *bp, int index) +{ + struct bnx2x_fastpath *fp = &bp->fp[index]; + struct bnx2x_fp_txdata *txdata; + struct bnx2x_queue_state_params q_params = {NULL}; + int rc, tx_index; + + DP(NETIF_MSG_IFDOWN, "stopping queue %d cid %d\n", index, fp->cid); + + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + /* We want to wait for completion in this context */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + /* close tx-only connections */ + for (tx_index = FIRST_TX_ONLY_COS_INDEX; + tx_index < fp->max_cos; + tx_index++){ + + /* ascertain this is a normal queue*/ + txdata = fp->txdata_ptr[tx_index]; + + DP(NETIF_MSG_IFDOWN, "stopping tx-only queue %d\n", + txdata->txq_index); + + /* send halt terminate on tx-only connection */ + q_params.cmd = BNX2X_Q_CMD_TERMINATE; + memset(&q_params.params.terminate, 0, + sizeof(q_params.params.terminate)); + q_params.params.terminate.cid_index = tx_index; + + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + + /* send halt terminate on tx-only connection */ + q_params.cmd = BNX2X_Q_CMD_CFC_DEL; + memset(&q_params.params.cfc_del, 0, + sizeof(q_params.params.cfc_del)); + q_params.params.cfc_del.cid_index = tx_index; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + } + /* Stop the primary connection: */ + /* ...halt the connection */ + q_params.cmd = BNX2X_Q_CMD_HALT; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + + /* ...terminate the connection */ + q_params.cmd = BNX2X_Q_CMD_TERMINATE; + memset(&q_params.params.terminate, 0, + sizeof(q_params.params.terminate)); + q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + /* ...delete cfc entry */ + q_params.cmd = BNX2X_Q_CMD_CFC_DEL; + memset(&q_params.params.cfc_del, 0, + sizeof(q_params.params.cfc_del)); + q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX; + return bnx2x_queue_state_change(bp, &q_params); +} + +static void bnx2x_reset_func(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int i; + + /* Disable the function in the FW */ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0); + + /* FP SBs */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id), + SB_DISABLED); + } + + if (CNIC_LOADED(bp)) + /* CNIC SB */ + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET + (bnx2x_cnic_fw_sb_id(bp)), SB_DISABLED); + + /* SP SB */ + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), + SB_DISABLED); + + for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) + REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), + 0); + + /* Configure IGU */ + if (bp->common.int_block == INT_BLOCK_HC) { + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } else { + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); + } + + if (CNIC_LOADED(bp)) { + /* Disable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); + /* + * Wait for at least 10ms and up to 2 second for the timers + * scan to complete + */ + for (i = 0; i < 200; i++) { + usleep_range(10000, 20000); + if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4)) + break; + } + } + /* Clear ILT */ + bnx2x_clear_func_ilt(bp, func); + + /* Timers workaround bug for E2: if this is vnic-3, + * we need to set the entire ilt range for this timers. + */ + if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) { + struct ilt_client_info ilt_cli; + /* use dummy TM client */ + memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); + ilt_cli.start = 0; + ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; + ilt_cli.client_num = ILT_CLIENT_TM; + + bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR); + } + + /* this assumes that reset_port() called before reset_func()*/ + if (!CHIP_IS_E1x(bp)) + bnx2x_pf_disable(bp); + + bp->dmae_ready = 0; +} + +static void bnx2x_reset_port(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 val; + + /* Reset physical Link */ + bnx2x__link_reset(bp); + + REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); + + /* Do not rcv packets to BRB */ + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0); + /* Do not direct rcv packets that are not for MCP to the BRB */ + REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); + + /* Configure AEU */ + REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0); + + msleep(100); + /* Check for BRB port occupancy */ + val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); + if (val) + DP(NETIF_MSG_IFDOWN, + "BRB1 is not empty %d blocks are occupied\n", val); + + /* TODO: Close Doorbell port? */ +} + +static int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code) +{ + struct bnx2x_func_state_params func_params = {NULL}; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_HW_RESET; + + func_params.params.hw_init.load_phase = load_code; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_func_stop(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + int rc; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_STOP; + + /* + * Try to stop the function the 'good way'. If fails (in case + * of a parity error during bnx2x_chip_cleanup()) and we are + * not in a debug mode, perform a state transaction in order to + * enable further HW_RESET transaction. + */ + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { +#ifdef BNX2X_STOP_ON_ERROR + return rc; +#else + BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry transaction\n"); + __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags); + return bnx2x_func_state_change(bp, &func_params); +#endif + } + + return 0; +} + +/** + * bnx2x_send_unload_req - request unload mode from the MCP. + * + * @bp: driver handle + * @unload_mode: requested function's unload mode + * + * Return unload mode returned by the MCP: COMMON, PORT or FUNC. + */ +u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) +{ + u32 reset_code = 0; + int port = BP_PORT(bp); + + /* Select the UNLOAD request mode */ + if (unload_mode == UNLOAD_NORMAL) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + else if (bp->flags & NO_WOL_FLAG) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + + else if (bp->wol) { + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u8 *mac_addr = bp->dev->dev_addr; + struct pci_dev *pdev = bp->pdev; + u32 val; + u16 pmc; + + /* The mac address is written to entries 1-4 to + * preserve entry 0 which is used by the PMF + */ + u8 entry = (BP_VN(bp) + 1)*8; + + val = (mac_addr[0] << 8) | mac_addr[1]; + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); + + val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | + (mac_addr[4] << 8) | mac_addr[5]; + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val); + + /* Enable the PME and clear the status */ + pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &pmc); + pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS; + pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, pmc); + + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; + + } else + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + /* Send the request to the MCP */ + if (!BP_NOMCP(bp)) + reset_code = bnx2x_fw_command(bp, reset_code, 0); + else { + int path = BP_PATH(bp); + + DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] %d, %d, %d\n", + path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], + bnx2x_load_count[path][2]); + bnx2x_load_count[path][0]--; + bnx2x_load_count[path][1 + port]--; + DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] %d, %d, %d\n", + path, bnx2x_load_count[path][0], bnx2x_load_count[path][1], + bnx2x_load_count[path][2]); + if (bnx2x_load_count[path][0] == 0) + reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; + else if (bnx2x_load_count[path][1 + port] == 0) + reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT; + else + reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION; + } + + return reset_code; +} + +/** + * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. + * + * @bp: driver handle + * @keep_link: true iff link should be kept up + */ +void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link) +{ + u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0; + + /* Report UNLOAD_DONE to MCP */ + if (!BP_NOMCP(bp)) + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param); +} + +static int bnx2x_func_wait_started(struct bnx2x *bp) +{ + int tout = 50; + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + + if (!bp->port.pmf) + return 0; + + /* + * (assumption: No Attention from MCP at this stage) + * PMF probably in the middle of TX disable/enable transaction + * 1. Sync IRS for default SB + * 2. Sync SP queue - this guarantees us that attention handling started + * 3. Wait, that TX disable/enable transaction completes + * + * 1+2 guarantee that if DCBx attention was scheduled it already changed + * pending bit of transaction from STARTED-->TX_STOPPED, if we already + * received completion for the transaction the state is TX_STOPPED. + * State will return to STARTED after completion of TX_STOPPED-->STARTED + * transaction. + */ + + /* make sure default SB ISR is done */ + if (msix) + synchronize_irq(bp->msix_table[0].vector); + else + synchronize_irq(bp->pdev->irq); + + flush_workqueue(bnx2x_wq); + flush_workqueue(bnx2x_iov_wq); + + while (bnx2x_func_get_state(bp, &bp->func_obj) != + BNX2X_F_STATE_STARTED && tout--) + msleep(20); + + if (bnx2x_func_get_state(bp, &bp->func_obj) != + BNX2X_F_STATE_STARTED) { +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("Wrong function state\n"); + return -EBUSY; +#else + /* + * Failed to complete the transaction in a "good way" + * Force both transactions with CLR bit + */ + struct bnx2x_func_state_params func_params = {NULL}; + + DP(NETIF_MSG_IFDOWN, + "Hmmm... Unexpected function state! Forcing STARTED-->TX_STOPPED-->STARTED\n"); + + func_params.f_obj = &bp->func_obj; + __set_bit(RAMROD_DRV_CLR_ONLY, + &func_params.ramrod_flags); + + /* STARTED-->TX_ST0PPED */ + func_params.cmd = BNX2X_F_CMD_TX_STOP; + bnx2x_func_state_change(bp, &func_params); + + /* TX_ST0PPED-->STARTED */ + func_params.cmd = BNX2X_F_CMD_TX_START; + return bnx2x_func_state_change(bp, &func_params); +#endif + } + + return 0; +} + +static void bnx2x_disable_ptp(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + /* Disable sending PTP packets to host */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); + + /* Reset PTP event detection rules */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); + + /* Disable the PTP feature */ + REG_WR(bp, port ? NIG_REG_P1_PTP_EN : + NIG_REG_P0_PTP_EN, 0x0); +} + +/* Called during unload, to stop PTP-related stuff */ +static void bnx2x_stop_ptp(struct bnx2x *bp) +{ + /* Cancel PTP work queue. Should be done after the Tx queues are + * drained to prevent additional scheduling. + */ + cancel_work_sync(&bp->ptp_task); + + if (bp->ptp_tx_skb) { + dev_kfree_skb_any(bp->ptp_tx_skb); + bp->ptp_tx_skb = NULL; + } + + /* Disable PTP in HW */ + bnx2x_disable_ptp(bp); + + DP(BNX2X_MSG_PTP, "PTP stop ended successfully\n"); +} + +void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) +{ + int port = BP_PORT(bp); + int i, rc = 0; + u8 cos; + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + u32 reset_code; + + /* Wait until tx fastpath tasks complete */ + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + for_each_cos_in_tx_queue(fp, cos) + rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]); +#ifdef BNX2X_STOP_ON_ERROR + if (rc) + return; +#endif + } + + /* Give HW time to discard old tx messages */ + usleep_range(1000, 2000); + + /* Clean all ETH MACs */ + rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_ETH_MAC, + false); + if (rc < 0) + BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc); + + /* Clean up UC list */ + rc = bnx2x_del_all_macs(bp, &bp->sp_objs[0].mac_obj, BNX2X_UC_LIST_MAC, + true); + if (rc < 0) + BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n", + rc); + + /* The whole *vlan_obj structure may be not initialized if VLAN + * filtering offload is not supported by hardware. Currently this is + * true for all hardware covered by CHIP_IS_E1x(). + */ + if (!CHIP_IS_E1x(bp)) { + /* Remove all currently configured VLANs */ + rc = bnx2x_del_all_vlans(bp); + if (rc < 0) + BNX2X_ERR("Failed to delete all VLANs\n"); + } + + /* Disable LLH */ + if (!CHIP_IS_E1(bp)) + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); + + /* Set "drop all" (stop Rx). + * We need to take a netif_addr_lock() here in order to prevent + * a race between the completion code and this code. + */ + netif_addr_lock_bh(bp->dev); + /* Schedule the rx_mode command */ + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) + set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); + else if (bp->slowpath) + bnx2x_set_storm_rx_mode(bp); + + /* Cleanup multicast configuration */ + rparam.mcast_obj = &bp->mcast_obj; + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) + BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc); + + netif_addr_unlock_bh(bp->dev); + + bnx2x_iov_chip_cleanup(bp); + + /* + * Send the UNLOAD_REQUEST to the MCP. This will return if + * this function should perform FUNC, PORT or COMMON HW + * reset. + */ + reset_code = bnx2x_send_unload_req(bp, unload_mode); + + /* + * (assumption: No Attention from MCP at this stage) + * PMF probably in the middle of TX disable/enable transaction + */ + rc = bnx2x_func_wait_started(bp); + if (rc) { + BNX2X_ERR("bnx2x_func_wait_started failed\n"); +#ifdef BNX2X_STOP_ON_ERROR + return; +#endif + } + + /* Close multi and leading connections + * Completions for ramrods are collected in a synchronous way + */ + for_each_eth_queue(bp, i) + if (bnx2x_stop_queue(bp, i)) +#ifdef BNX2X_STOP_ON_ERROR + return; +#else + goto unload_error; +#endif + + if (CNIC_LOADED(bp)) { + for_each_cnic_queue(bp, i) + if (bnx2x_stop_queue(bp, i)) +#ifdef BNX2X_STOP_ON_ERROR + return; +#else + goto unload_error; +#endif + } + + /* If SP settings didn't get completed so far - something + * very wrong has happen. + */ + if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) + BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n"); + +#ifndef BNX2X_STOP_ON_ERROR +unload_error: +#endif + rc = bnx2x_func_stop(bp); + if (rc) { + BNX2X_ERR("Function stop failed!\n"); +#ifdef BNX2X_STOP_ON_ERROR + return; +#endif + } + + /* stop_ptp should be after the Tx queues are drained to prevent + * scheduling to the cancelled PTP work queue. It should also be after + * function stop ramrod is sent, since as part of this ramrod FW access + * PTP registers. + */ + if (bp->flags & PTP_SUPPORTED) + bnx2x_stop_ptp(bp); + + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + if (CNIC_LOADED(bp)) + bnx2x_del_all_napi_cnic(bp); + + /* Release IRQs */ + bnx2x_free_irq(bp); + + /* Reset the chip, unless PCI function is offline. If we reach this + * point following a PCI error handling, it means device is really + * in a bad state and we're about to remove it, so reset the chip + * is not a good idea. + */ + if (!pci_channel_offline(bp->pdev)) { + rc = bnx2x_reset_hw(bp, reset_code); + if (rc) + BNX2X_ERR("HW_RESET failed\n"); + } + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp, keep_link); +} + +void bnx2x_disable_close_the_gate(struct bnx2x *bp) +{ + u32 val; + + DP(NETIF_MSG_IFDOWN, "Disabling \"close the gates\"\n"); + + if (CHIP_IS_E1(bp)) { + int port = BP_PORT(bp); + u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + + val = REG_RD(bp, addr); + val &= ~(0x300); + REG_WR(bp, addr, val); + } else { + val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK); + val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK | + MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK); + REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val); + } +} + +/* Close gates #2, #3 and #4: */ +static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) +{ + u32 val; + + /* Gates #2 and #4a are closed/opened for "not E1" only */ + if (!CHIP_IS_E1(bp)) { + /* #4 */ + REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close); + /* #2 */ + REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close); + } + + /* #3 */ + if (CHIP_IS_E1x(bp)) { + /* Prevent interrupts from HC on both ports */ + val = REG_RD(bp, HC_REG_CONFIG_1); + REG_WR(bp, HC_REG_CONFIG_1, + (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) : + (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1)); + + val = REG_RD(bp, HC_REG_CONFIG_0); + REG_WR(bp, HC_REG_CONFIG_0, + (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : + (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); + } else { + /* Prevent incoming interrupts in IGU */ + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); + + REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, + (!close) ? + (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) : + (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE)); + } + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "%s gates #2, #3 and #4\n", + close ? "closing" : "opening"); + mmiowb(); +} + +#define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */ + +static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val) +{ + /* Do some magic... */ + u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); + *magic_val = val & SHARED_MF_CLP_MAGIC; + MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC); +} + +/** + * bnx2x_clp_reset_done - restore the value of the `magic' bit. + * + * @bp: driver handle + * @magic_val: old value of the `magic' bit. + */ +static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val) +{ + /* Restore the `magic' bit value... */ + u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); + MF_CFG_WR(bp, shared_mf_config.clp_mb, + (val & (~SHARED_MF_CLP_MAGIC)) | magic_val); +} + +/** + * bnx2x_reset_mcp_prep - prepare for MCP reset. + * + * @bp: driver handle + * @magic_val: old value of 'magic' bit. + * + * Takes care of CLP configurations. + */ +static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val) +{ + u32 shmem; + u32 validity_offset; + + DP(NETIF_MSG_HW | NETIF_MSG_IFUP, "Starting\n"); + + /* Set `magic' bit in order to save MF config */ + if (!CHIP_IS_E1(bp)) + bnx2x_clp_reset_prep(bp, magic_val); + + /* Get shmem offset */ + shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + validity_offset = + offsetof(struct shmem_region, validity_map[BP_PORT(bp)]); + + /* Clear validity map flags */ + if (shmem > 0) + REG_WR(bp, shmem + validity_offset, 0); +} + +#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */ +#define MCP_ONE_TIMEOUT 100 /* 100 ms */ + +/** + * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT + * + * @bp: driver handle + */ +static void bnx2x_mcp_wait_one(struct bnx2x *bp) +{ + /* special handling for emulation and FPGA, + wait 10 times longer */ + if (CHIP_REV_IS_SLOW(bp)) + msleep(MCP_ONE_TIMEOUT*10); + else + msleep(MCP_ONE_TIMEOUT); +} + +/* + * initializes bp->common.shmem_base and waits for validity signature to appear + */ +static int bnx2x_init_shmem(struct bnx2x *bp) +{ + int cnt = 0; + u32 val = 0; + + do { + bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + + /* If we read all 0xFFs, means we are in PCI error state and + * should bail out to avoid crashes on adapter's FW reads. + */ + if (bp->common.shmem_base == 0xFFFFFFFF) { + bp->flags |= NO_MCP_FLAG; + return -ENODEV; + } + + if (bp->common.shmem_base) { + val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); + if (val & SHR_MEM_VALIDITY_MB) + return 0; + } + + bnx2x_mcp_wait_one(bp); + + } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT)); + + BNX2X_ERR("BAD MCP validity signature\n"); + + return -ENODEV; +} + +static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val) +{ + int rc = bnx2x_init_shmem(bp); + + /* Restore the `magic' bit value */ + if (!CHIP_IS_E1(bp)) + bnx2x_clp_reset_done(bp, magic_val); + + return rc; +} + +static void bnx2x_pxp_prep(struct bnx2x *bp) +{ + if (!CHIP_IS_E1(bp)) { + REG_WR(bp, PXP2_REG_RD_START_INIT, 0); + REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0); + mmiowb(); + } +} + +/* + * Reset the whole chip except for: + * - PCIE core + * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by + * one reset bit) + * - IGU + * - MISC (including AEU) + * - GRC + * - RBCN, RBCP + */ +static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global) +{ + u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2; + u32 global_bits2, stay_reset2; + + /* + * Bits that have to be set in reset_mask2 if we want to reset 'global' + * (per chip) blocks. + */ + global_bits2 = + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE; + + /* Don't reset the following blocks. + * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be + * reset, as in 4 port device they might still be owned + * by the MCP (there is only one leader per path). + */ + not_reset_mask1 = + MISC_REGISTERS_RESET_REG_1_RST_HC | + MISC_REGISTERS_RESET_REG_1_RST_PXPV | + MISC_REGISTERS_RESET_REG_1_RST_PXP; + + not_reset_mask2 = + MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO | + MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE | + MISC_REGISTERS_RESET_REG_2_RST_RBCN | + MISC_REGISTERS_RESET_REG_2_RST_GRC | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B | + MISC_REGISTERS_RESET_REG_2_RST_ATC | + MISC_REGISTERS_RESET_REG_2_PGLC | + MISC_REGISTERS_RESET_REG_2_RST_BMAC0 | + MISC_REGISTERS_RESET_REG_2_RST_BMAC1 | + MISC_REGISTERS_RESET_REG_2_RST_EMAC0 | + MISC_REGISTERS_RESET_REG_2_RST_EMAC1 | + MISC_REGISTERS_RESET_REG_2_UMAC0 | + MISC_REGISTERS_RESET_REG_2_UMAC1; + + /* + * Keep the following blocks in reset: + * - all xxMACs are handled by the bnx2x_link code. + */ + stay_reset2 = + MISC_REGISTERS_RESET_REG_2_XMAC | + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT; + + /* Full reset masks according to the chip */ + reset_mask1 = 0xffffffff; + + if (CHIP_IS_E1(bp)) + reset_mask2 = 0xffff; + else if (CHIP_IS_E1H(bp)) + reset_mask2 = 0x1ffff; + else if (CHIP_IS_E2(bp)) + reset_mask2 = 0xfffff; + else /* CHIP_IS_E3 */ + reset_mask2 = 0x3ffffff; + + /* Don't reset global blocks unless we need to */ + if (!global) + reset_mask2 &= ~global_bits2; + + /* + * In case of attention in the QM, we need to reset PXP + * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM + * because otherwise QM reset would release 'close the gates' shortly + * before resetting the PXP, then the PSWRQ would send a write + * request to PGLUE. Then when PXP is reset, PGLUE would try to + * read the payload data from PSWWR, but PSWWR would not + * respond. The write queue in PGLUE would stuck, dmae commands + * would not return. Therefore it's important to reset the second + * reset register (containing the + * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the + * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM + * bit). + */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + reset_mask2 & (~not_reset_mask2)); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + reset_mask1 & (~not_reset_mask1)); + + barrier(); + mmiowb(); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + reset_mask2 & (~stay_reset2)); + + barrier(); + mmiowb(); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1); + mmiowb(); +} + +/** + * bnx2x_er_poll_igu_vq - poll for pending writes bit. + * It should get cleared in no more than 1s. + * + * @bp: driver handle + * + * It should get cleared in no more than 1s. Returns 0 if + * pending writes bit gets cleared. + */ +static int bnx2x_er_poll_igu_vq(struct bnx2x *bp) +{ + u32 cnt = 1000; + u32 pend_bits = 0; + + do { + pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS); + + if (pend_bits == 0) + break; + + usleep_range(1000, 2000); + } while (cnt-- > 0); + + if (cnt <= 0) { + BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n", + pend_bits); + return -EBUSY; + } + + return 0; +} + +static int bnx2x_process_kill(struct bnx2x *bp, bool global) +{ + int cnt = 1000; + u32 val = 0; + u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2; + u32 tags_63_32 = 0; + + /* Empty the Tetris buffer, wait for 1s */ + do { + sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT); + blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT); + port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0); + port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1); + pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2); + if (CHIP_IS_E3(bp)) + tags_63_32 = REG_RD(bp, PGLUE_B_REG_TAGS_63_32); + + if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) && + ((port_is_idle_0 & 0x1) == 0x1) && + ((port_is_idle_1 & 0x1) == 0x1) && + (pgl_exp_rom2 == 0xffffffff) && + (!CHIP_IS_E3(bp) || (tags_63_32 == 0xffffffff))) + break; + usleep_range(1000, 2000); + } while (cnt-- > 0); + + if (cnt <= 0) { + BNX2X_ERR("Tetris buffer didn't get empty or there are still outstanding read requests after 1s!\n"); + BNX2X_ERR("sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n", + sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, + pgl_exp_rom2); + return -EAGAIN; + } + + barrier(); + + /* Close gates #2, #3 and #4 */ + bnx2x_set_234_gates(bp, true); + + /* Poll for IGU VQs for 57712 and newer chips */ + if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp)) + return -EAGAIN; + + /* TBD: Indicate that "process kill" is in progress to MCP */ + + /* Clear "unprepared" bit */ + REG_WR(bp, MISC_REG_UNPREPARED, 0); + barrier(); + + /* Make sure all is written to the chip before the reset */ + mmiowb(); + + /* Wait for 1ms to empty GLUE and PCI-E core queues, + * PSWHST, GRC and PSWRD Tetris buffer. + */ + usleep_range(1000, 2000); + + /* Prepare to chip reset: */ + /* MCP */ + if (global) + bnx2x_reset_mcp_prep(bp, &val); + + /* PXP */ + bnx2x_pxp_prep(bp); + barrier(); + + /* reset the chip */ + bnx2x_process_kill_chip_reset(bp, global); + barrier(); + + /* clear errors in PGB */ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f); + + /* Recover after reset: */ + /* MCP */ + if (global && bnx2x_reset_mcp_comp(bp, val)) + return -EAGAIN; + + /* TBD: Add resetting the NO_MCP mode DB here */ + + /* Open the gates #2, #3 and #4 */ + bnx2x_set_234_gates(bp, false); + + /* TBD: IGU/AEU preparation bring back the AEU/IGU to a + * reset state, re-enable attentions. */ + + return 0; +} + +static int bnx2x_leader_reset(struct bnx2x *bp) +{ + int rc = 0; + bool global = bnx2x_reset_is_global(bp); + u32 load_code; + + /* if not going to reset MCP - load "fake" driver to reset HW while + * driver is owner of the HW + */ + if (!global && !BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, + DRV_MSG_CODE_LOAD_REQ_WITH_LFA); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset; + } + if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) && + (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) { + BNX2X_ERR("MCP unexpected resp, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset2; + } + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset2; + } + } + + /* Try to recover after the failure */ + if (bnx2x_process_kill(bp, global)) { + BNX2X_ERR("Something bad had happen on engine %d! Aii!\n", + BP_PATH(bp)); + rc = -EAGAIN; + goto exit_leader_reset2; + } + + /* + * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver + * state. + */ + bnx2x_set_reset_done(bp); + if (global) + bnx2x_clear_reset_global(bp); + +exit_leader_reset2: + /* unload "fake driver" if it was loaded */ + if (!global && !BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + } +exit_leader_reset: + bp->is_leader = 0; + bnx2x_release_leader_lock(bp); + smp_mb(); + return rc; +} + +static void bnx2x_recovery_failed(struct bnx2x *bp) +{ + netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n"); + + /* Disconnect this device */ + netif_device_detach(bp->dev); + + /* + * Block ifup for all function on this engine until "process kill" + * or power cycle. + */ + bnx2x_set_reset_in_progress(bp); + + /* Shut down the power */ + bnx2x_set_power_state(bp, PCI_D3hot); + + bp->recovery_state = BNX2X_RECOVERY_FAILED; + + smp_mb(); +} + +/* + * Assumption: runs under rtnl lock. This together with the fact + * that it's called only from bnx2x_sp_rtnl() ensure that it + * will never be called when netif_running(bp->dev) is false. + */ +static void bnx2x_parity_recover(struct bnx2x *bp) +{ + u32 error_recovered, error_unrecovered; + bool is_parity, global = false; +#ifdef CONFIG_BNX2X_SRIOV + int vf_idx; + + for (vf_idx = 0; vf_idx < bp->requested_nr_virtfn; vf_idx++) { + struct bnx2x_virtf *vf = BP_VF(bp, vf_idx); + + if (vf) + vf->state = VF_LOST; + } +#endif + DP(NETIF_MSG_HW, "Handling parity\n"); + while (1) { + switch (bp->recovery_state) { + case BNX2X_RECOVERY_INIT: + DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n"); + is_parity = bnx2x_chk_parity_attn(bp, &global, false); + WARN_ON(!is_parity); + + /* Try to get a LEADER_LOCK HW lock */ + if (bnx2x_trylock_leader_lock(bp)) { + bnx2x_set_reset_in_progress(bp); + /* + * Check if there is a global attention and if + * there was a global attention, set the global + * reset bit. + */ + + if (global) + bnx2x_set_reset_global(bp); + + bp->is_leader = 1; + } + + /* Stop the driver */ + /* If interface has been removed - break */ + if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false)) + return; + + bp->recovery_state = BNX2X_RECOVERY_WAIT; + + /* Ensure "is_leader", MCP command sequence and + * "recovery_state" update values are seen on other + * CPUs. + */ + smp_mb(); + break; + + case BNX2X_RECOVERY_WAIT: + DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n"); + if (bp->is_leader) { + int other_engine = BP_PATH(bp) ? 0 : 1; + bool other_load_status = + bnx2x_get_load_status(bp, other_engine); + bool load_status = + bnx2x_get_load_status(bp, BP_PATH(bp)); + global = bnx2x_reset_is_global(bp); + + /* + * In case of a parity in a global block, let + * the first leader that performs a + * leader_reset() reset the global blocks in + * order to clear global attentions. Otherwise + * the gates will remain closed for that + * engine. + */ + if (load_status || + (global && other_load_status)) { + /* Wait until all other functions get + * down. + */ + schedule_delayed_work(&bp->sp_rtnl_task, + HZ/10); + return; + } else { + /* If all other functions got down - + * try to bring the chip back to + * normal. In any case it's an exit + * point for a leader. + */ + if (bnx2x_leader_reset(bp)) { + bnx2x_recovery_failed(bp); + return; + } + + /* If we are here, means that the + * leader has succeeded and doesn't + * want to be a leader any more. Try + * to continue as a none-leader. + */ + break; + } + } else { /* non-leader */ + if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) { + /* Try to get a LEADER_LOCK HW lock as + * long as a former leader may have + * been unloaded by the user or + * released a leadership by another + * reason. + */ + if (bnx2x_trylock_leader_lock(bp)) { + /* I'm a leader now! Restart a + * switch case. + */ + bp->is_leader = 1; + break; + } + + schedule_delayed_work(&bp->sp_rtnl_task, + HZ/10); + return; + + } else { + /* + * If there was a global attention, wait + * for it to be cleared. + */ + if (bnx2x_reset_is_global(bp)) { + schedule_delayed_work( + &bp->sp_rtnl_task, + HZ/10); + return; + } + + error_recovered = + bp->eth_stats.recoverable_error; + error_unrecovered = + bp->eth_stats.unrecoverable_error; + bp->recovery_state = + BNX2X_RECOVERY_NIC_LOADING; + if (bnx2x_nic_load(bp, LOAD_NORMAL)) { + error_unrecovered++; + netdev_err(bp->dev, + "Recovery failed. Power cycle needed\n"); + /* Disconnect this device */ + netif_device_detach(bp->dev); + /* Shut down the power */ + bnx2x_set_power_state( + bp, PCI_D3hot); + smp_mb(); + } else { + bp->recovery_state = + BNX2X_RECOVERY_DONE; + error_recovered++; + smp_mb(); + } + bp->eth_stats.recoverable_error = + error_recovered; + bp->eth_stats.unrecoverable_error = + error_unrecovered; + + return; + } + } + default: + return; + } + } +} + +static int bnx2x_udp_port_update(struct bnx2x *bp) +{ + struct bnx2x_func_switch_update_params *switch_update_params; + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_udp_tunnel *udp_tunnel; + u16 vxlan_port = 0, geneve_port = 0; + int rc; + + switch_update_params = &func_params.params.switch_update; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; + + /* Function parameters */ + __set_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG, + &switch_update_params->changes); + + if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) { + udp_tunnel = &bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE]; + geneve_port = udp_tunnel->dst_port; + switch_update_params->geneve_dst_port = geneve_port; + } + + if (bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count) { + udp_tunnel = &bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN]; + vxlan_port = udp_tunnel->dst_port; + switch_update_params->vxlan_dst_port = vxlan_port; + } + + /* Re-enable inner-rss for the offloaded UDP tunnels */ + __set_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS, + &switch_update_params->changes); + + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) + BNX2X_ERR("failed to set UDP dst port to %04x %04x (rc = 0x%x)\n", + vxlan_port, geneve_port, rc); + else + DP(BNX2X_MSG_SP, + "Configured UDP ports: Vxlan [%04x] Geneve [%04x]\n", + vxlan_port, geneve_port); + + return rc; +} + +static void __bnx2x_add_udp_port(struct bnx2x *bp, u16 port, + enum bnx2x_udp_port_type type) +{ + struct bnx2x_udp_tunnel *udp_port = &bp->udp_tunnel_ports[type]; + + if (!netif_running(bp->dev) || !IS_PF(bp) || CHIP_IS_E1x(bp)) + return; + + if (udp_port->count && udp_port->dst_port == port) { + udp_port->count++; + return; + } + + if (udp_port->count) { + DP(BNX2X_MSG_SP, + "UDP tunnel [%d] - destination port limit reached\n", + type); + return; + } + + udp_port->dst_port = port; + udp_port->count = 1; + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_CHANGE_UDP_PORT, 0); +} + +static void __bnx2x_del_udp_port(struct bnx2x *bp, u16 port, + enum bnx2x_udp_port_type type) +{ + struct bnx2x_udp_tunnel *udp_port = &bp->udp_tunnel_ports[type]; + + if (!IS_PF(bp) || CHIP_IS_E1x(bp)) + return; + + if (!udp_port->count || udp_port->dst_port != port) { + DP(BNX2X_MSG_SP, "Invalid UDP tunnel [%d] port\n", + type); + return; + } + + /* Remove reference, and make certain it's no longer in use */ + udp_port->count--; + if (udp_port->count) + return; + udp_port->dst_port = 0; + + if (netif_running(bp->dev)) + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_CHANGE_UDP_PORT, 0); + else + DP(BNX2X_MSG_SP, "Deleted UDP tunnel [%d] port %d\n", + type, port); +} + +static void bnx2x_udp_tunnel_add(struct net_device *netdev, + struct udp_tunnel_info *ti) +{ + struct bnx2x *bp = netdev_priv(netdev); + u16 t_port = ntohs(ti->port); + + switch (ti->type) { + case UDP_TUNNEL_TYPE_VXLAN: + __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN); + break; + case UDP_TUNNEL_TYPE_GENEVE: + __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE); + break; + default: + break; + } +} + +static void bnx2x_udp_tunnel_del(struct net_device *netdev, + struct udp_tunnel_info *ti) +{ + struct bnx2x *bp = netdev_priv(netdev); + u16 t_port = ntohs(ti->port); + + switch (ti->type) { + case UDP_TUNNEL_TYPE_VXLAN: + __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN); + break; + case UDP_TUNNEL_TYPE_GENEVE: + __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE); + break; + default: + break; + } +} + +static int bnx2x_close(struct net_device *dev); + +/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is + * scheduled on a general queue in order to prevent a dead lock. + */ +static void bnx2x_sp_rtnl_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work); + + rtnl_lock(); + + if (!netif_running(bp->dev)) { + rtnl_unlock(); + return; + } + + if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) { +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" + "you will need to reboot when done\n"); + goto sp_rtnl_not_reset; +#endif + /* + * Clear all pending SP commands as we are going to reset the + * function anyway. + */ + bp->sp_rtnl_state = 0; + smp_mb(); + + bnx2x_parity_recover(bp); + + rtnl_unlock(); + return; + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) { +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined so reset not done to allow debug dump,\n" + "you will need to reboot when done\n"); + goto sp_rtnl_not_reset; +#endif + + /* + * Clear all pending SP commands as we are going to reset the + * function anyway. + */ + bp->sp_rtnl_state = 0; + smp_mb(); + + /* Immediately indicate link as down */ + bp->link_vars.link_up = 0; + bp->force_link_down = true; + netif_carrier_off(bp->dev); + BNX2X_ERR("Indicating link is down due to Tx-timeout\n"); + + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); + /* When ret value shows failure of allocation failure, + * the nic is rebooted again. If open still fails, a error + * message to notify the user. + */ + if (bnx2x_nic_load(bp, LOAD_NORMAL) == -ENOMEM) { + bnx2x_nic_unload(bp, UNLOAD_NORMAL, true); + if (bnx2x_nic_load(bp, LOAD_NORMAL)) + BNX2X_ERR("Open the NIC fails again!\n"); + } + rtnl_unlock(); + return; + } +#ifdef BNX2X_STOP_ON_ERROR +sp_rtnl_not_reset: +#endif + if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state)) + bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos); + if (test_and_clear_bit(BNX2X_SP_RTNL_AFEX_F_UPDATE, &bp->sp_rtnl_state)) + bnx2x_after_function_update(bp); + /* + * in case of fan failure we need to reset id if the "stop on error" + * debug flag is set, since we trying to prevent permanent overheating + * damage + */ + if (test_and_clear_bit(BNX2X_SP_RTNL_FAN_FAILURE, &bp->sp_rtnl_state)) { + DP(NETIF_MSG_HW, "fan failure detected. Unloading driver\n"); + netif_device_detach(bp->dev); + bnx2x_close(bp->dev); + rtnl_unlock(); + return; + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_MCAST, &bp->sp_rtnl_state)) { + DP(BNX2X_MSG_SP, + "sending set mcast vf pf channel message from rtnl sp-task\n"); + bnx2x_vfpf_set_mcast(bp->dev); + } + if (test_and_clear_bit(BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, + &bp->sp_rtnl_state)){ + if (netif_carrier_ok(bp->dev)) { + bnx2x_tx_disable(bp); + BNX2X_ERR("PF indicated channel is not servicable anymore. This means this VF device is no longer operational\n"); + } + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_RX_MODE, &bp->sp_rtnl_state)) { + DP(BNX2X_MSG_SP, "Handling Rx Mode setting\n"); + bnx2x_set_rx_mode_inner(bp); + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_HYPERVISOR_VLAN, + &bp->sp_rtnl_state)) + bnx2x_pf_set_vfs_vlan(bp); + + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) { + bnx2x_dcbx_stop_hw_tx(bp); + bnx2x_dcbx_resume_hw_tx(bp); + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_GET_DRV_VERSION, + &bp->sp_rtnl_state)) + bnx2x_update_mng_version(bp); + + if (test_and_clear_bit(BNX2X_SP_RTNL_UPDATE_SVID, &bp->sp_rtnl_state)) + bnx2x_handle_update_svid_cmd(bp); + + if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT, + &bp->sp_rtnl_state)) { + if (bnx2x_udp_port_update(bp)) { + /* On error, forget configuration */ + memset(bp->udp_tunnel_ports, 0, + sizeof(struct bnx2x_udp_tunnel) * + BNX2X_UDP_PORT_MAX); + } else { + /* Since we don't store additional port information, + * if no ports are configured for any feature ask for + * information about currently configured ports. + */ + if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count && + !bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) + udp_tunnel_get_rx_info(bp->dev); + } + } + + /* work which needs rtnl lock not-taken (as it takes the lock itself and + * can be called from other contexts as well) + */ + rtnl_unlock(); + + /* enable SR-IOV if applicable */ + if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, + &bp->sp_rtnl_state)) { + bnx2x_disable_sriov(bp); + bnx2x_enable_sriov(bp); + } +} + +static void bnx2x_period_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work); + + if (!netif_running(bp->dev)) + goto period_task_exit; + + if (CHIP_REV_IS_SLOW(bp)) { + BNX2X_ERR("period task called on emulation, ignoring\n"); + goto period_task_exit; + } + + bnx2x_acquire_phy_lock(bp); + /* + * The barrier is needed to ensure the ordering between the writing to + * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and + * the reading here. + */ + smp_mb(); + if (bp->port.pmf) { + bnx2x_period_func(&bp->link_params, &bp->link_vars); + + /* Re-queue task in 1 sec */ + queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ); + } + + bnx2x_release_phy_lock(bp); +period_task_exit: + return; +} + +/* + * Init service functions + */ + +static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) +{ + u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0; + u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base; + return base + (BP_ABS_FUNC(bp)) * stride; +} + +static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp, + u8 port, u32 reset_reg, + struct bnx2x_mac_vals *vals) +{ + u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; + u32 base_addr; + + if (!(mask & reset_reg)) + return false; + + BNX2X_DEV_INFO("Disable umac Rx %02x\n", port); + base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG; + vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]); + REG_WR(bp, vals->umac_addr[port], 0); + + return true; +} + +static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, + struct bnx2x_mac_vals *vals) +{ + u32 val, base_addr, offset, mask, reset_reg; + bool mac_stopped = false; + u8 port = BP_PORT(bp); + + /* reset addresses as they also mark which values were changed */ + memset(vals, 0, sizeof(*vals)); + + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); + + if (!CHIP_IS_E3(bp)) { + val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4); + mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port; + if ((mask & reset_reg) && val) { + u32 wb_data[2]; + BNX2X_DEV_INFO("Disable bmac Rx\n"); + base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM + : NIG_REG_INGRESS_BMAC0_MEM; + offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL + : BIGMAC_REGISTER_BMAC_CONTROL; + + /* + * use rd/wr since we cannot use dmae. This is safe + * since MCP won't access the bus due to the request + * to unload, and no function on the path can be + * loaded at this time. + */ + wb_data[0] = REG_RD(bp, base_addr + offset); + wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); + vals->bmac_addr = base_addr + offset; + vals->bmac_val[0] = wb_data[0]; + vals->bmac_val[1] = wb_data[1]; + wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR(bp, vals->bmac_addr, wb_data[0]); + REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); + } + BNX2X_DEV_INFO("Disable emac Rx\n"); + vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; + vals->emac_val = REG_RD(bp, vals->emac_addr); + REG_WR(bp, vals->emac_addr, 0); + mac_stopped = true; + } else { + if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { + BNX2X_DEV_INFO("Disable xmac Rx\n"); + base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI); + REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, + val & ~(1 << 1)); + REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, + val | (1 << 1)); + vals->xmac_addr = base_addr + XMAC_REG_CTRL; + vals->xmac_val = REG_RD(bp, vals->xmac_addr); + REG_WR(bp, vals->xmac_addr, 0); + mac_stopped = true; + } + + mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0, + reset_reg, vals); + mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1, + reset_reg, vals); + } + + if (mac_stopped) + msleep(20); +} + +#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4)) +#define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \ + 0x1848 + ((f) << 4)) +#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff) +#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff) +#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq)) + +#define BCM_5710_UNDI_FW_MF_MAJOR (0x07) +#define BCM_5710_UNDI_FW_MF_MINOR (0x08) +#define BCM_5710_UNDI_FW_MF_VERS (0x05) + +static bool bnx2x_prev_is_after_undi(struct bnx2x *bp) +{ + /* UNDI marks its presence in DORQ - + * it initializes CID offset for normal bell to 0x7 + */ + if (!(REG_RD(bp, MISC_REG_RESET_REG_1) & + MISC_REGISTERS_RESET_REG_1_RST_DORQ)) + return false; + + if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) { + BNX2X_DEV_INFO("UNDI previously loaded\n"); + return true; + } + + return false; +} + +static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc) +{ + u16 rcq, bd; + u32 addr, tmp_reg; + + if (BP_FUNC(bp) < 2) + addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp)); + else + addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2); + + tmp_reg = REG_RD(bp, addr); + rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc; + bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc; + + tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd); + REG_WR(bp, addr, tmp_reg); + + BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n", + BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq); +} + +static int bnx2x_prev_mcp_done(struct bnx2x *bp) +{ + u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, + DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET); + if (!rc) { + BNX2X_ERR("MCP response failure, aborting\n"); + return -EBUSY; + } + + return 0; +} + +static struct bnx2x_prev_path_list * + bnx2x_prev_path_get_entry(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + + list_for_each_entry(tmp_list, &bnx2x_prev_list, list) + if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot && + bp->pdev->bus->number == tmp_list->bus && + BP_PATH(bp) == tmp_list->path) + return tmp_list; + + return NULL; +} + +static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + int rc; + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + return rc; + } + + tmp_list = bnx2x_prev_path_get_entry(bp); + if (tmp_list) { + tmp_list->aer = 1; + rc = 0; + } else { + BNX2X_ERR("path %d: Entry does not exist for eeh; Flow occurs before initial insmod is over ?\n", + BP_PATH(bp)); + } + + up(&bnx2x_prev_sem); + + return rc; +} + +static bool bnx2x_prev_is_path_marked(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + bool rc = false; + + if (down_trylock(&bnx2x_prev_sem)) + return false; + + tmp_list = bnx2x_prev_path_get_entry(bp); + if (tmp_list) { + if (tmp_list->aer) { + DP(NETIF_MSG_HW, "Path %d was marked by AER\n", + BP_PATH(bp)); + } else { + rc = true; + BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n", + BP_PATH(bp)); + } + } + + up(&bnx2x_prev_sem); + + return rc; +} + +bool bnx2x_port_after_undi(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *entry; + bool val; + + down(&bnx2x_prev_sem); + + entry = bnx2x_prev_path_get_entry(bp); + val = !!(entry && (entry->undi & (1 << BP_PORT(bp)))); + + up(&bnx2x_prev_sem); + + return val; +} + +static int bnx2x_prev_mark_path(struct bnx2x *bp, bool after_undi) +{ + struct bnx2x_prev_path_list *tmp_list; + int rc; + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + return rc; + } + + /* Check whether the entry for this path already exists */ + tmp_list = bnx2x_prev_path_get_entry(bp); + if (tmp_list) { + if (!tmp_list->aer) { + BNX2X_ERR("Re-Marking the path.\n"); + } else { + DP(NETIF_MSG_HW, "Removing AER indication from path %d\n", + BP_PATH(bp)); + tmp_list->aer = 0; + } + up(&bnx2x_prev_sem); + return 0; + } + up(&bnx2x_prev_sem); + + /* Create an entry for this path and add it */ + tmp_list = kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL); + if (!tmp_list) { + BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n"); + return -ENOMEM; + } + + tmp_list->bus = bp->pdev->bus->number; + tmp_list->slot = PCI_SLOT(bp->pdev->devfn); + tmp_list->path = BP_PATH(bp); + tmp_list->aer = 0; + tmp_list->undi = after_undi ? (1 << BP_PORT(bp)) : 0; + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + kfree(tmp_list); + } else { + DP(NETIF_MSG_HW, "Marked path [%d] - finished previous unload\n", + BP_PATH(bp)); + list_add(&tmp_list->list, &bnx2x_prev_list); + up(&bnx2x_prev_sem); + } + + return rc; +} + +static int bnx2x_do_flr(struct bnx2x *bp) +{ + struct pci_dev *dev = bp->pdev; + + if (CHIP_IS_E1x(bp)) { + BNX2X_DEV_INFO("FLR not supported in E1/E1H\n"); + return -EINVAL; + } + + /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */ + if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { + BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", + bp->common.bc_ver); + return -EINVAL; + } + + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); + + BNX2X_DEV_INFO("Initiating FLR\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); + + return 0; +} + +static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) +{ + int rc; + + BNX2X_DEV_INFO("Uncommon unload Flow\n"); + + /* Test if previous unload process was already finished for this path */ + if (bnx2x_prev_is_path_marked(bp)) + return bnx2x_prev_mcp_done(bp); + + BNX2X_DEV_INFO("Path is unmarked\n"); + + /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */ + if (bnx2x_prev_is_after_undi(bp)) + goto out; + + /* If function has FLR capabilities, and existing FW version matches + * the one required, then FLR will be sufficient to clean any residue + * left by previous driver + */ + rc = bnx2x_compare_fw_ver(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION, false); + + if (!rc) { + /* fw version is good */ + BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n"); + rc = bnx2x_do_flr(bp); + } + + if (!rc) { + /* FLR was performed */ + BNX2X_DEV_INFO("FLR successful\n"); + return 0; + } + + BNX2X_DEV_INFO("Could not FLR\n"); + +out: + /* Close the MCP request, return failure*/ + rc = bnx2x_prev_mcp_done(bp); + if (!rc) + rc = BNX2X_PREV_WAIT_NEEDED; + + return rc; +} + +static int bnx2x_prev_unload_common(struct bnx2x *bp) +{ + u32 reset_reg, tmp_reg = 0, rc; + bool prev_undi = false; + struct bnx2x_mac_vals mac_vals; + + /* It is possible a previous function received 'common' answer, + * but hasn't loaded yet, therefore creating a scenario of + * multiple functions receiving 'common' on the same path. + */ + BNX2X_DEV_INFO("Common unload Flow\n"); + + memset(&mac_vals, 0, sizeof(mac_vals)); + + if (bnx2x_prev_is_path_marked(bp)) + return bnx2x_prev_mcp_done(bp); + + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); + + /* Reset should be performed after BRB is emptied */ + if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) { + u32 timer_count = 1000; + + /* Close the MAC Rx to prevent BRB from filling up */ + bnx2x_prev_unload_close_mac(bp, &mac_vals); + + /* close LLH filters for both ports towards the BRB */ + bnx2x_set_rx_filter(&bp->link_params, 0); + bp->link_params.port ^= 1; + bnx2x_set_rx_filter(&bp->link_params, 0); + bp->link_params.port ^= 1; + + /* Check if the UNDI driver was previously loaded */ + if (bnx2x_prev_is_after_undi(bp)) { + prev_undi = true; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + /* clear possible idle check errors */ + REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); + } + if (!CHIP_IS_E1x(bp)) + /* block FW from writing to host */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + + /* wait until BRB is empty */ + tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); + while (timer_count) { + u32 prev_brb = tmp_reg; + + tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); + if (!tmp_reg) + break; + + BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg); + + /* reset timer as long as BRB actually gets emptied */ + if (prev_brb > tmp_reg) + timer_count = 1000; + else + timer_count--; + + /* If UNDI resides in memory, manually increment it */ + if (prev_undi) + bnx2x_prev_unload_undi_inc(bp, 1); + + udelay(10); + } + + if (!timer_count) + BNX2X_ERR("Failed to empty BRB, hope for the best\n"); + } + + /* No packets are in the pipeline, path is ready for reset */ + bnx2x_reset_common(bp); + + if (mac_vals.xmac_addr) + REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); + if (mac_vals.umac_addr[0]) + REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]); + if (mac_vals.umac_addr[1]) + REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]); + if (mac_vals.emac_addr) + REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); + if (mac_vals.bmac_addr) { + REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); + REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); + } + + rc = bnx2x_prev_mark_path(bp, prev_undi); + if (rc) { + bnx2x_prev_mcp_done(bp); + return rc; + } + + return bnx2x_prev_mcp_done(bp); +} + +static int bnx2x_prev_unload(struct bnx2x *bp) +{ + int time_counter = 10; + u32 rc, fw, hw_lock_reg, hw_lock_val; + BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); + + /* clear hw from errors which may have resulted from an interrupted + * dmae transaction. + */ + bnx2x_clean_pglue_errors(bp); + + /* Release previously held locks */ + hw_lock_reg = (BP_FUNC(bp) <= 5) ? + (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : + (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); + + hw_lock_val = REG_RD(bp, hw_lock_reg); + if (hw_lock_val) { + if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) { + BNX2X_DEV_INFO("Release Previously held NVRAM lock\n"); + REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, + (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp))); + } + + BNX2X_DEV_INFO("Release Previously held hw lock\n"); + REG_WR(bp, hw_lock_reg, 0xffffffff); + } else + BNX2X_DEV_INFO("No need to release hw/nvram locks\n"); + + if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) { + BNX2X_DEV_INFO("Release previously held alr\n"); + bnx2x_release_alr(bp); + } + + do { + int aer = 0; + /* Lock MCP using an unload request */ + fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0); + if (!fw) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + break; + } + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Cannot check for AER; Received %d when tried to take lock\n", + rc); + } else { + /* If Path is marked by EEH, ignore unload status */ + aer = !!(bnx2x_prev_path_get_entry(bp) && + bnx2x_prev_path_get_entry(bp)->aer); + up(&bnx2x_prev_sem); + } + + if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON || aer) { + rc = bnx2x_prev_unload_common(bp); + break; + } + + /* non-common reply from MCP might require looping */ + rc = bnx2x_prev_unload_uncommon(bp); + if (rc != BNX2X_PREV_WAIT_NEEDED) + break; + + msleep(20); + } while (--time_counter); + + if (!time_counter || rc) { + BNX2X_DEV_INFO("Unloading previous driver did not occur, Possibly due to MF UNDI\n"); + rc = -EPROBE_DEFER; + } + + /* Mark function if its port was used to boot from SAN */ + if (bnx2x_port_after_undi(bp)) + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_BOOT_FROM_SAN; + + BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc); + + return rc; +} + +static void bnx2x_get_common_hwinfo(struct bnx2x *bp) +{ + u32 val, val2, val3, val4, id, boot_mode; + u16 pmc; + + /* Get the chip revision id and number. */ + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ + val = REG_RD(bp, MISC_REG_CHIP_NUM); + id = ((val & 0xffff) << 16); + val = REG_RD(bp, MISC_REG_CHIP_REV); + id |= ((val & 0xf) << 12); + + /* Metal is read from PCI regs, but we can't access >=0x400 from + * the configuration space (so we need to reg_rd) + */ + val = REG_RD(bp, PCICFG_OFFSET + PCI_ID_VAL3); + id |= (((val >> 24) & 0xf) << 4); + val = REG_RD(bp, MISC_REG_BOND_ID); + id |= (val & 0xf); + bp->common.chip_id = id; + + /* force 57811 according to MISC register */ + if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) { + if (CHIP_IS_57810(bp)) + bp->common.chip_id = (CHIP_NUM_57811 << 16) | + (bp->common.chip_id & 0x0000FFFF); + else if (CHIP_IS_57810_MF(bp)) + bp->common.chip_id = (CHIP_NUM_57811_MF << 16) | + (bp->common.chip_id & 0x0000FFFF); + bp->common.chip_id |= 0x1; + } + + /* Set doorbell size */ + bp->db_size = (1 << BNX2X_DB_SHIFT); + + if (!CHIP_IS_E1x(bp)) { + val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); + if ((val & 1) == 0) + val = REG_RD(bp, MISC_REG_PORT4MODE_EN); + else + val = (val >> 1) & 1; + BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" : + "2_PORT_MODE"); + bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE : + CHIP_2_PORT_MODE; + + if (CHIP_MODE_IS_4_PORT(bp)) + bp->pfid = (bp->pf_num >> 1); /* 0..3 */ + else + bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */ + } else { + bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */ + bp->pfid = bp->pf_num; /* 0..7 */ + } + + BNX2X_DEV_INFO("pf_id: %x", bp->pfid); + + bp->link_params.chip_id = bp->common.chip_id; + BNX2X_DEV_INFO("chip ID is 0x%x\n", id); + + val = (REG_RD(bp, 0x2874) & 0x55); + if ((bp->common.chip_id & 0x1) || + (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) { + bp->flags |= ONE_PORT_FLAG; + BNX2X_DEV_INFO("single port device\n"); + } + + val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4); + bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE << + (val & MCPR_NVM_CFG4_FLASH_SIZE)); + BNX2X_DEV_INFO("flash_size 0x%x (%d)\n", + bp->common.flash_size, bp->common.flash_size); + + bnx2x_init_shmem(bp); + + bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ? + MISC_REG_GENERIC_CR_1 : + MISC_REG_GENERIC_CR_0)); + + bp->link_params.shmem_base = bp->common.shmem_base; + bp->link_params.shmem2_base = bp->common.shmem2_base; + if (SHMEM2_RD(bp, size) > + (u32)offsetof(struct shmem2_region, lfa_host_addr[BP_PORT(bp)])) + bp->link_params.lfa_base = + REG_RD(bp, bp->common.shmem2_base + + (u32)offsetof(struct shmem2_region, + lfa_host_addr[BP_PORT(bp)])); + else + bp->link_params.lfa_base = 0; + BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n", + bp->common.shmem_base, bp->common.shmem2_base); + + if (!bp->common.shmem_base) { + BNX2X_DEV_INFO("MCP not active\n"); + bp->flags |= NO_MCP_FLAG; + return; + } + + bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); + BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config); + + bp->link_params.hw_led_mode = ((bp->common.hw_config & + SHARED_HW_CFG_LED_MODE_MASK) >> + SHARED_HW_CFG_LED_MODE_SHIFT); + + bp->link_params.feature_config_flags = 0; + val = SHMEM_RD(bp, dev_info.shared_feature_config.config); + if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; + else + bp->link_params.feature_config_flags &= + ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; + + val = SHMEM_RD(bp, dev_info.bc_rev) >> 8; + bp->common.bc_ver = val; + BNX2X_DEV_INFO("bc_ver %X\n", val); + if (val < BNX2X_BC_VER) { + /* for now only warn + * later we might need to enforce this */ + BNX2X_ERR("This driver needs bc_ver %X but found %X, please upgrade BC\n", + BNX2X_BC_VER, val); + } + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0; + + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0; + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ? + FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0; + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ? + FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0; + + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_MT_SUPPORTED) ? + FEATURE_CONFIG_MT_SUPPORT : 0; + + bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ? + BC_SUPPORTS_PFC_STATS : 0; + + bp->flags |= (val >= REQ_BC_VER_4_FCOE_FEATURES) ? + BC_SUPPORTS_FCOE_FEATURES : 0; + + bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ? + BC_SUPPORTS_DCBX_MSG_NON_PMF : 0; + + bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ? + BC_SUPPORTS_RMMOD_CMD : 0; + + boot_mode = SHMEM_RD(bp, + dev_info.port_feature_config[BP_PORT(bp)].mba_config) & + PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK; + switch (boot_mode) { + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_PXE; + break; + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_ISCSIB: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_ISCSI; + break; + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_FCOE_BOOT: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_FCOE; + break; + case PORT_FEATURE_MBA_BOOT_AGENT_TYPE_NONE: + bp->common.boot_mode = FEATURE_ETH_BOOTMODE_NONE; + break; + } + + pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_PMC, &pmc); + bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG; + + BNX2X_DEV_INFO("%sWoL capable\n", + (bp->flags & NO_WOL_FLAG) ? "not " : ""); + + val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num); + val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]); + val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]); + val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]); + + dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n", + val, val2, val3, val4); +} + +#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID) +#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR) + +static int bnx2x_get_igu_cam_info(struct bnx2x *bp) +{ + int pfid = BP_FUNC(bp); + int igu_sb_id; + u32 val; + u8 fid, igu_sb_cnt = 0; + + bp->igu_base_sb = 0xff; + if (CHIP_INT_MODE_IS_BC(bp)) { + int vn = BP_VN(bp); + igu_sb_cnt = bp->igu_sb_cnt; + bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * + FP_SB_MAX_E1x; + + bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x + + (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn); + + return 0; + } + + /* IGU in normal mode - read CAM */ + for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; + igu_sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = IGU_FID(val); + if ((fid & IGU_FID_ENCODE_IS_PF)) { + if ((fid & IGU_FID_PF_NUM_MASK) != pfid) + continue; + if (IGU_VEC(val) == 0) + /* default status block */ + bp->igu_dsb_id = igu_sb_id; + else { + if (bp->igu_base_sb == 0xff) + bp->igu_base_sb = igu_sb_id; + igu_sb_cnt++; + } + } + } + +#ifdef CONFIG_PCI_MSI + /* Due to new PF resource allocation by MFW T7.4 and above, it's + * optional that number of CAM entries will not be equal to the value + * advertised in PCI. + * Driver should use the minimal value of both as the actual status + * block count + */ + bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); +#endif + + if (igu_sb_cnt == 0) { + BNX2X_ERR("CAM configuration error\n"); + return -EINVAL; + } + + return 0; +} + +static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) +{ + int cfg_size = 0, idx, port = BP_PORT(bp); + + /* Aggregation of supported attributes of all external phys */ + bp->port.supported[0] = 0; + bp->port.supported[1] = 0; + switch (bp->link_params.num_phys) { + case 1: + bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported; + cfg_size = 1; + break; + case 2: + bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported; + cfg_size = 1; + break; + case 3: + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) { + bp->port.supported[1] = + bp->link_params.phy[EXT_PHY1].supported; + bp->port.supported[0] = + bp->link_params.phy[EXT_PHY2].supported; + } else { + bp->port.supported[0] = + bp->link_params.phy[EXT_PHY1].supported; + bp->port.supported[1] = + bp->link_params.phy[EXT_PHY2].supported; + } + cfg_size = 2; + break; + } + + if (!(bp->port.supported[0] || bp->port.supported[1])) { + BNX2X_ERR("NVRAM config error. BAD phy config. PHY1 config 0x%x, PHY2 config 0x%x\n", + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config), + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config2)); + return; + } + + if (CHIP_IS_E3(bp)) + bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR); + else { + switch (switch_cfg) { + case SWITCH_CFG_1G: + bp->port.phy_addr = REG_RD( + bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10); + break; + case SWITCH_CFG_10G: + bp->port.phy_addr = REG_RD( + bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18); + break; + default: + BNX2X_ERR("BAD switch_cfg link_config 0x%x\n", + bp->port.link_config[0]); + return; + } + } + BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr); + /* mask what we support according to speed_cap_mask per configuration */ + for (idx = 0; idx < cfg_size; idx++) { + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) + bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) + bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) + bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) + bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) + bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) + bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) + bp->port.supported[idx] &= ~SUPPORTED_20000baseKR2_Full; + } + + BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0], + bp->port.supported[1]); +} + +static void bnx2x_link_settings_requested(struct bnx2x *bp) +{ + u32 link_config, idx, cfg_size = 0; + bp->port.advertising[0] = 0; + bp->port.advertising[1] = 0; + switch (bp->link_params.num_phys) { + case 1: + case 2: + cfg_size = 1; + break; + case 3: + cfg_size = 2; + break; + } + for (idx = 0; idx < cfg_size; idx++) { + bp->link_params.req_duplex[idx] = DUPLEX_FULL; + link_config = bp->port.link_config[idx]; + switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { + case PORT_FEATURE_LINK_SPEED_AUTO: + if (bp->port.supported[idx] & SUPPORTED_Autoneg) { + bp->link_params.req_line_speed[idx] = + SPEED_AUTO_NEG; + bp->port.advertising[idx] |= + bp->port.supported[idx]; + if (bp->link_params.phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + bp->port.advertising[idx] |= + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); + } else { + /* force 10G, no AN */ + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + continue; + } + break; + + case PORT_FEATURE_LINK_SPEED_10M_FULL: + if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10; + bp->port.advertising[idx] |= + (ADVERTISED_10baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_10M_HALF: + if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) { + bp->link_params.req_line_speed[idx] = + SPEED_10; + bp->link_params.req_duplex[idx] = + DUPLEX_HALF; + bp->port.advertising[idx] |= + (ADVERTISED_10baseT_Half | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_100M_FULL: + if (bp->port.supported[idx] & + SUPPORTED_100baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_100; + bp->port.advertising[idx] |= + (ADVERTISED_100baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_100M_HALF: + if (bp->port.supported[idx] & + SUPPORTED_100baseT_Half) { + bp->link_params.req_line_speed[idx] = + SPEED_100; + bp->link_params.req_duplex[idx] = + DUPLEX_HALF; + bp->port.advertising[idx] |= + (ADVERTISED_100baseT_Half | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_1G: + if (bp->port.supported[idx] & + SUPPORTED_1000baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_1000; + bp->port.advertising[idx] |= + (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + } else if (bp->port.supported[idx] & + SUPPORTED_1000baseKX_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_1000; + bp->port.advertising[idx] |= + ADVERTISED_1000baseKX_Full; + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_2_5G: + if (bp->port.supported[idx] & + SUPPORTED_2500baseX_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_2500; + bp->port.advertising[idx] |= + (ADVERTISED_2500baseX_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_10G_CX4: + if (bp->port.supported[idx] & + SUPPORTED_10000baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + } else if (bp->port.supported[idx] & + SUPPORTED_10000baseKR_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseKR_Full | + ADVERTISED_FIBRE); + } else { + BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + case PORT_FEATURE_LINK_SPEED_20G: + bp->link_params.req_line_speed[idx] = SPEED_20000; + + break; + default: + BNX2X_ERR("NVRAM config error. BAD link speed link_config 0x%x\n", + link_config); + bp->link_params.req_line_speed[idx] = + SPEED_AUTO_NEG; + bp->port.advertising[idx] = + bp->port.supported[idx]; + break; + } + + bp->link_params.req_flow_ctrl[idx] = (link_config & + PORT_FEATURE_FLOW_CONTROL_MASK); + if (bp->link_params.req_flow_ctrl[idx] == + BNX2X_FLOW_CTRL_AUTO) { + if (!(bp->port.supported[idx] & SUPPORTED_Autoneg)) + bp->link_params.req_flow_ctrl[idx] = + BNX2X_FLOW_CTRL_NONE; + else + bnx2x_set_requested_fc(bp); + } + + BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x advertising 0x%x\n", + bp->link_params.req_line_speed[idx], + bp->link_params.req_duplex[idx], + bp->link_params.req_flow_ctrl[idx], + bp->port.advertising[idx]); + } +} + +static void bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi) +{ + __be16 mac_hi_be = cpu_to_be16(mac_hi); + __be32 mac_lo_be = cpu_to_be32(mac_lo); + memcpy(mac_buf, &mac_hi_be, sizeof(mac_hi_be)); + memcpy(mac_buf + sizeof(mac_hi_be), &mac_lo_be, sizeof(mac_lo_be)); +} + +static void bnx2x_get_port_hwinfo(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 config; + u32 ext_phy_type, ext_phy_config, eee_mode; + + bp->link_params.bp = bp; + bp->link_params.port = port; + + bp->link_params.lane_config = + SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); + + bp->link_params.speed_cap_mask[0] = + SHMEM_RD(bp, + dev_info.port_hw_config[port].speed_capability_mask) & + PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; + bp->link_params.speed_cap_mask[1] = + SHMEM_RD(bp, + dev_info.port_hw_config[port].speed_capability_mask2) & + PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK; + bp->port.link_config[0] = + SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); + + bp->port.link_config[1] = + SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2); + + bp->link_params.multi_phy_config = + SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config); + /* If the device is capable of WoL, set the default state according + * to the HW + */ + config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); + bp->wol = (!(bp->flags & NO_WOL_FLAG) && + (config & PORT_FEATURE_WOL_ENABLED)); + + if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == + PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE && !IS_MF(bp)) + bp->flags |= NO_ISCSI_FLAG; + if ((config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) == + PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI && !(IS_MF(bp))) + bp->flags |= NO_FCOE_FLAG; + + BNX2X_DEV_INFO("lane_config 0x%08x speed_cap_mask0 0x%08x link_config0 0x%08x\n", + bp->link_params.lane_config, + bp->link_params.speed_cap_mask[0], + bp->port.link_config[0]); + + bp->link_params.switch_cfg = (bp->port.link_config[0] & + PORT_FEATURE_CONNECTED_SWITCH_MASK); + bnx2x_phy_probe(&bp->link_params); + bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); + + bnx2x_link_settings_requested(bp); + + /* + * If connected directly, work with the internal PHY, otherwise, work + * with the external PHY + */ + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + bp->mdio.prtad = bp->port.phy_addr; + + else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) + bp->mdio.prtad = + XGXS_EXT_PHY_ADDR(ext_phy_config); + + /* Configure link feature according to nvram value */ + eee_mode = (((SHMEM_RD(bp, dev_info. + port_feature_config[port].eee_power_mode)) & + PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >> + PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT); + if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) { + bp->link_params.eee_mode = EEE_MODE_ADV_LPI | + EEE_MODE_ENABLE_LPI | + EEE_MODE_OUTPUT_TIME; + } else { + bp->link_params.eee_mode = 0; + } +} + +void bnx2x_get_iscsi_info(struct bnx2x *bp) +{ + u32 no_flags = NO_ISCSI_FLAG; + int port = BP_PORT(bp); + u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, + drv_lic_key[port].max_iscsi_conn); + + if (!CNIC_SUPPORT(bp)) { + bp->flags |= no_flags; + return; + } + + /* Get the number of maximum allowed iSCSI connections */ + bp->cnic_eth_dev.max_iscsi_conn = + (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >> + BNX2X_MAX_ISCSI_INIT_CONN_SHIFT; + + BNX2X_DEV_INFO("max_iscsi_conn 0x%x\n", + bp->cnic_eth_dev.max_iscsi_conn); + + /* + * If maximum allowed number of connections is zero - + * disable the feature. + */ + if (!bp->cnic_eth_dev.max_iscsi_conn) + bp->flags |= no_flags; +} + +static void bnx2x_get_ext_wwn_info(struct bnx2x *bp, int func) +{ + /* Port info */ + bp->cnic_eth_dev.fcoe_wwn_port_name_hi = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_upper); + bp->cnic_eth_dev.fcoe_wwn_port_name_lo = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_port_name_lower); + + /* Node info */ + bp->cnic_eth_dev.fcoe_wwn_node_name_hi = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_upper); + bp->cnic_eth_dev.fcoe_wwn_node_name_lo = + MF_CFG_RD(bp, func_ext_config[func].fcoe_wwn_node_name_lower); +} + +static int bnx2x_shared_fcoe_funcs(struct bnx2x *bp) +{ + u8 count = 0; + + if (IS_MF(bp)) { + u8 fid; + + /* iterate over absolute function ids for this path: */ + for (fid = BP_PATH(bp); fid < E2_FUNC_MAX * 2; fid += 2) { + if (IS_MF_SD(bp)) { + u32 cfg = MF_CFG_RD(bp, + func_mf_config[fid].config); + + if (!(cfg & FUNC_MF_CFG_FUNC_HIDE) && + ((cfg & FUNC_MF_CFG_PROTOCOL_MASK) == + FUNC_MF_CFG_PROTOCOL_FCOE)) + count++; + } else { + u32 cfg = MF_CFG_RD(bp, + func_ext_config[fid]. + func_cfg); + + if ((cfg & MACP_FUNC_CFG_FLAGS_ENABLED) && + (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)) + count++; + } + } + } else { /* SF */ + int port, port_cnt = CHIP_MODE_IS_4_PORT(bp) ? 2 : 1; + + for (port = 0; port < port_cnt; port++) { + u32 lic = SHMEM_RD(bp, + drv_lic_key[port].max_fcoe_conn) ^ + FW_ENCODE_32BIT_PATTERN; + if (lic) + count++; + } + } + + return count; +} + +static void bnx2x_get_fcoe_info(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_ABS_FUNC(bp); + u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, + drv_lic_key[port].max_fcoe_conn); + u8 num_fcoe_func = bnx2x_shared_fcoe_funcs(bp); + + if (!CNIC_SUPPORT(bp)) { + bp->flags |= NO_FCOE_FLAG; + return; + } + + /* Get the number of maximum allowed FCoE connections */ + bp->cnic_eth_dev.max_fcoe_conn = + (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >> + BNX2X_MAX_FCOE_INIT_CONN_SHIFT; + + /* Calculate the number of maximum allowed FCoE tasks */ + bp->cnic_eth_dev.max_fcoe_exchanges = MAX_NUM_FCOE_TASKS_PER_ENGINE; + + /* check if FCoE resources must be shared between different functions */ + if (num_fcoe_func) + bp->cnic_eth_dev.max_fcoe_exchanges /= num_fcoe_func; + + /* Read the WWN: */ + if (!IS_MF(bp)) { + /* Port info */ + bp->cnic_eth_dev.fcoe_wwn_port_name_hi = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_port_name_upper); + bp->cnic_eth_dev.fcoe_wwn_port_name_lo = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_port_name_lower); + + /* Node info */ + bp->cnic_eth_dev.fcoe_wwn_node_name_hi = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_node_name_upper); + bp->cnic_eth_dev.fcoe_wwn_node_name_lo = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_node_name_lower); + } else if (!IS_MF_SD(bp)) { + /* Read the WWN info only if the FCoE feature is enabled for + * this function. + */ + if (BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp)) + bnx2x_get_ext_wwn_info(bp, func); + } else { + if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp)) + bnx2x_get_ext_wwn_info(bp, func); + } + + BNX2X_DEV_INFO("max_fcoe_conn 0x%x\n", bp->cnic_eth_dev.max_fcoe_conn); + + /* + * If maximum allowed number of connections is zero - + * disable the feature. + */ + if (!bp->cnic_eth_dev.max_fcoe_conn) { + bp->flags |= NO_FCOE_FLAG; + eth_zero_addr(bp->fip_mac); + } +} + +static void bnx2x_get_cnic_info(struct bnx2x *bp) +{ + /* + * iSCSI may be dynamically disabled but reading + * info here we will decrease memory usage by driver + * if the feature is disabled for good + */ + bnx2x_get_iscsi_info(bp); + bnx2x_get_fcoe_info(bp); +} + +static void bnx2x_get_cnic_mac_hwinfo(struct bnx2x *bp) +{ + u32 val, val2; + int func = BP_ABS_FUNC(bp); + int port = BP_PORT(bp); + u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac; + u8 *fip_mac = bp->fip_mac; + + if (IS_MF(bp)) { + /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or + * FCoE MAC then the appropriate feature should be disabled. + * In non SD mode features configuration comes from struct + * func_ext_config. + */ + if (!IS_MF_SD(bp)) { + u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); + if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) { + val2 = MF_CFG_RD(bp, func_ext_config[func]. + iscsi_mac_addr_upper); + val = MF_CFG_RD(bp, func_ext_config[func]. + iscsi_mac_addr_lower); + bnx2x_set_mac_buf(iscsi_mac, val, val2); + BNX2X_DEV_INFO + ("Read iSCSI MAC: %pM\n", iscsi_mac); + } else { + bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; + } + + if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) { + val2 = MF_CFG_RD(bp, func_ext_config[func]. + fcoe_mac_addr_upper); + val = MF_CFG_RD(bp, func_ext_config[func]. + fcoe_mac_addr_lower); + bnx2x_set_mac_buf(fip_mac, val, val2); + BNX2X_DEV_INFO + ("Read FCoE L2 MAC: %pM\n", fip_mac); + } else { + bp->flags |= NO_FCOE_FLAG; + } + + bp->mf_ext_config = cfg; + + } else { /* SD MODE */ + if (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) { + /* use primary mac as iscsi mac */ + memcpy(iscsi_mac, bp->dev->dev_addr, ETH_ALEN); + + BNX2X_DEV_INFO("SD ISCSI MODE\n"); + BNX2X_DEV_INFO + ("Read iSCSI MAC: %pM\n", iscsi_mac); + } else if (BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) { + /* use primary mac as fip mac */ + memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN); + BNX2X_DEV_INFO("SD FCoE MODE\n"); + BNX2X_DEV_INFO + ("Read FIP MAC: %pM\n", fip_mac); + } + } + + /* If this is a storage-only interface, use SAN mac as + * primary MAC. Notice that for SD this is already the case, + * as the SAN mac was copied from the primary MAC. + */ + if (IS_MF_FCOE_AFEX(bp)) + memcpy(bp->dev->dev_addr, fip_mac, ETH_ALEN); + } else { + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. + iscsi_mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port]. + iscsi_mac_lower); + bnx2x_set_mac_buf(iscsi_mac, val, val2); + + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. + fcoe_fip_mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port]. + fcoe_fip_mac_lower); + bnx2x_set_mac_buf(fip_mac, val, val2); + } + + /* Disable iSCSI OOO if MAC configuration is invalid. */ + if (!is_valid_ether_addr(iscsi_mac)) { + bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; + eth_zero_addr(iscsi_mac); + } + + /* Disable FCoE if MAC configuration is invalid. */ + if (!is_valid_ether_addr(fip_mac)) { + bp->flags |= NO_FCOE_FLAG; + eth_zero_addr(bp->fip_mac); + } +} + +static void bnx2x_get_mac_hwinfo(struct bnx2x *bp) +{ + u32 val, val2; + int func = BP_ABS_FUNC(bp); + int port = BP_PORT(bp); + + /* Zero primary MAC configuration */ + eth_zero_addr(bp->dev->dev_addr); + + if (BP_NOMCP(bp)) { + BNX2X_ERROR("warning: random MAC workaround active\n"); + eth_hw_addr_random(bp->dev); + } else if (IS_MF(bp)) { + val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper); + val = MF_CFG_RD(bp, func_mf_config[func].mac_lower); + if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) && + (val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) + bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); + + if (CNIC_SUPPORT(bp)) + bnx2x_get_cnic_mac_hwinfo(bp); + } else { + /* in SF read MACs from port configuration */ + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); + bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); + + if (CNIC_SUPPORT(bp)) + bnx2x_get_cnic_mac_hwinfo(bp); + } + + if (!BP_NOMCP(bp)) { + /* Read physical port identifier from shmem */ + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); + bnx2x_set_mac_buf(bp->phys_port_id, val, val2); + bp->flags |= HAS_PHYS_PORT_ID; + } + + memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); + + if (!is_valid_ether_addr(bp->dev->dev_addr)) + dev_err(&bp->pdev->dev, + "bad Ethernet MAC address configuration: %pM\n" + "change it manually before bringing up the appropriate network interface\n", + bp->dev->dev_addr); +} + +static bool bnx2x_get_dropless_info(struct bnx2x *bp) +{ + int tmp; + u32 cfg; + + if (IS_VF(bp)) + return false; + + if (IS_MF(bp) && !CHIP_IS_E1x(bp)) { + /* Take function: tmp = func */ + tmp = BP_ABS_FUNC(bp); + cfg = MF_CFG_RD(bp, func_ext_config[tmp].func_cfg); + cfg = !!(cfg & MACP_FUNC_CFG_PAUSE_ON_HOST_RING); + } else { + /* Take port: tmp = port */ + tmp = BP_PORT(bp); + cfg = SHMEM_RD(bp, + dev_info.port_hw_config[tmp].generic_features); + cfg = !!(cfg & PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED); + } + return cfg; +} + +static void validate_set_si_mode(struct bnx2x *bp) +{ + u8 func = BP_ABS_FUNC(bp); + u32 val; + + val = MF_CFG_RD(bp, func_mf_config[func].mac_upper); + + /* check for legal mac (upper bytes) */ + if (val != 0xffff) { + bp->mf_mode = MULTI_FUNCTION_SI; + bp->mf_config[BP_VN(bp)] = + MF_CFG_RD(bp, func_mf_config[func].config); + } else + BNX2X_DEV_INFO("illegal MAC address for SI\n"); +} + +static int bnx2x_get_hwinfo(struct bnx2x *bp) +{ + int /*abs*/func = BP_ABS_FUNC(bp); + int vn, mfw_vn; + u32 val = 0, val2 = 0; + int rc = 0; + + /* Validate that chip access is feasible */ + if (REG_RD(bp, MISC_REG_CHIP_NUM) == 0xffffffff) { + dev_err(&bp->pdev->dev, + "Chip read returns all Fs. Preventing probe from continuing\n"); + return -EINVAL; + } + + bnx2x_get_common_hwinfo(bp); + + /* + * initialize IGU parameters + */ + if (CHIP_IS_E1x(bp)) { + bp->common.int_block = INT_BLOCK_HC; + + bp->igu_dsb_id = DEF_SB_IGU_ID; + bp->igu_base_sb = 0; + } else { + bp->common.int_block = INT_BLOCK_IGU; + + /* do not allow device reset during IGU info processing */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); + + if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { + int tout = 5000; + + BNX2X_DEV_INFO("FORCING Normal Mode\n"); + + val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN); + REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val); + REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f); + + while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) { + tout--; + usleep_range(1000, 2000); + } + + if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) { + dev_err(&bp->pdev->dev, + "FORCING Normal Mode failed!!!\n"); + bnx2x_release_hw_lock(bp, + HW_LOCK_RESOURCE_RESET); + return -EPERM; + } + } + + if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { + BNX2X_DEV_INFO("IGU Backward Compatible Mode\n"); + bp->common.int_block |= INT_BLOCK_MODE_BW_COMP; + } else + BNX2X_DEV_INFO("IGU Normal Mode\n"); + + rc = bnx2x_get_igu_cam_info(bp); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + if (rc) + return rc; + } + + /* + * set base FW non-default (fast path) status block id, this value is + * used to initialize the fw_sb_id saved on the fp/queue structure to + * determine the id used by the FW. + */ + if (CHIP_IS_E1x(bp)) + bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp); + else /* + * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of + * the same queue are indicated on the same IGU SB). So we prefer + * FW and IGU SBs to be the same value. + */ + bp->base_fw_ndsb = bp->igu_base_sb; + + BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n" + "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb, + bp->igu_sb_cnt, bp->base_fw_ndsb); + + /* + * Initialize MF configuration + */ + + bp->mf_ov = 0; + bp->mf_mode = 0; + bp->mf_sub_mode = 0; + vn = BP_VN(bp); + mfw_vn = BP_FW_MB_IDX(bp); + + if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { + BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", + bp->common.shmem2_base, SHMEM2_RD(bp, size), + (u32)offsetof(struct shmem2_region, mf_cfg_addr)); + + if (SHMEM2_HAS(bp, mf_cfg_addr)) + bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr); + else + bp->common.mf_cfg_base = bp->common.shmem_base + + offsetof(struct shmem_region, func_mb) + + E1H_FUNC_MAX * sizeof(struct drv_func_mb); + /* + * get mf configuration: + * 1. Existence of MF configuration + * 2. MAC address must be legal (check only upper bytes) + * for Switch-Independent mode; + * OVLAN must be legal for Switch-Dependent mode + * 3. SF_MODE configures specific MF mode + */ + if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { + /* get mf configuration */ + val = SHMEM_RD(bp, + dev_info.shared_feature_config.config); + val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK; + + switch (val) { + case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT: + validate_set_si_mode(bp); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE: + if ((!CHIP_IS_E1x(bp)) && + (MF_CFG_RD(bp, func_mf_config[func]. + mac_upper) != 0xffff) && + (SHMEM2_HAS(bp, + afex_driver_support))) { + bp->mf_mode = MULTI_FUNCTION_AFEX; + bp->mf_config[vn] = MF_CFG_RD(bp, + func_mf_config[func].config); + } else { + BNX2X_DEV_INFO("can not configure afex mode\n"); + } + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED: + /* get OV configuration */ + val = MF_CFG_RD(bp, + func_mf_config[FUNC_0].e1hov_tag); + val &= FUNC_MF_CFG_E1HOV_TAG_MASK; + + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_mode = MULTI_FUNCTION_SD; + bp->mf_config[vn] = MF_CFG_RD(bp, + func_mf_config[func].config); + } else + BNX2X_DEV_INFO("illegal OV for SD\n"); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE: + bp->mf_mode = MULTI_FUNCTION_SD; + bp->mf_sub_mode = SUB_MF_MODE_BD; + bp->mf_config[vn] = + MF_CFG_RD(bp, + func_mf_config[func].config); + + if (SHMEM2_HAS(bp, mtu_size)) { + int mtu_idx = BP_FW_MB_IDX(bp); + u16 mtu_size; + u32 mtu; + + mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]); + mtu_size = (u16)mtu; + DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n", + mtu_size, mtu); + + /* if valid: update device mtu */ + if ((mtu_size >= ETH_MIN_PACKET_SIZE) && + (mtu_size <= + ETH_MAX_JUMBO_PACKET_SIZE)) + bp->dev->mtu = mtu_size; + } + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE: + bp->mf_mode = MULTI_FUNCTION_SD; + bp->mf_sub_mode = SUB_MF_MODE_UFP; + bp->mf_config[vn] = + MF_CFG_RD(bp, + func_mf_config[func].config); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF: + bp->mf_config[vn] = 0; + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE: + val2 = SHMEM_RD(bp, + dev_info.shared_hw_config.config_3); + val2 &= SHARED_HW_CFG_EXTENDED_MF_MODE_MASK; + switch (val2) { + case SHARED_HW_CFG_EXTENDED_MF_MODE_NPAR1_DOT_5: + validate_set_si_mode(bp); + bp->mf_sub_mode = + SUB_MF_MODE_NPAR1_DOT_5; + break; + default: + /* Unknown configuration */ + bp->mf_config[vn] = 0; + BNX2X_DEV_INFO("unknown extended MF mode 0x%x\n", + val); + } + break; + default: + /* Unknown configuration: reset mf_config */ + bp->mf_config[vn] = 0; + BNX2X_DEV_INFO("unknown MF mode 0x%x\n", val); + } + } + + BNX2X_DEV_INFO("%s function mode\n", + IS_MF(bp) ? "multi" : "single"); + + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK; + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_ov = val; + bp->path_has_ovlan = true; + + BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n", + func, bp->mf_ov, bp->mf_ov); + } else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) || + (bp->mf_sub_mode == SUB_MF_MODE_BD)) { + dev_err(&bp->pdev->dev, + "Unexpected - no valid MF OV for func %d in UFP/BD mode\n", + func); + bp->path_has_ovlan = true; + } else { + dev_err(&bp->pdev->dev, + "No valid MF OV for func %d, aborting\n", + func); + return -EPERM; + } + break; + case MULTI_FUNCTION_AFEX: + BNX2X_DEV_INFO("func %d is in MF afex mode\n", func); + break; + case MULTI_FUNCTION_SI: + BNX2X_DEV_INFO("func %d is in MF switch-independent mode\n", + func); + break; + default: + if (vn) { + dev_err(&bp->pdev->dev, + "VN %d is in a single function mode, aborting\n", + vn); + return -EPERM; + } + break; + } + + /* check if other port on the path needs ovlan: + * Since MF configuration is shared between ports + * Possible mixed modes are only + * {SF, SI} {SF, SD} {SD, SF} {SI, SF} + */ + if (CHIP_MODE_IS_4_PORT(bp) && + !bp->path_has_ovlan && + !IS_MF(bp) && + bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { + u8 other_port = !BP_PORT(bp); + u8 other_func = BP_PATH(bp) + 2*other_port; + val = MF_CFG_RD(bp, + func_mf_config[other_func].e1hov_tag); + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) + bp->path_has_ovlan = true; + } + } + + /* adjust igu_sb_cnt to MF for E1H */ + if (CHIP_IS_E1H(bp) && IS_MF(bp)) + bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT); + + /* port info */ + bnx2x_get_port_hwinfo(bp); + + /* Get MAC addresses */ + bnx2x_get_mac_hwinfo(bp); + + bnx2x_get_cnic_info(bp); + + return rc; +} + +static void bnx2x_read_fwinfo(struct bnx2x *bp) +{ + int cnt, i, block_end, rodi; + char vpd_start[BNX2X_VPD_LEN+1]; + char str_id_reg[VENDOR_ID_LEN+1]; + char str_id_cap[VENDOR_ID_LEN+1]; + char *vpd_data; + char *vpd_extended_data = NULL; + u8 len; + + cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start); + memset(bp->fw_ver, 0, sizeof(bp->fw_ver)); + + if (cnt < BNX2X_VPD_LEN) + goto out_not_found; + + /* VPD RO tag should be first tag after identifier string, hence + * we should be able to find it in first BNX2X_VPD_LEN chars + */ + i = pci_vpd_find_tag(vpd_start, 0, BNX2X_VPD_LEN, + PCI_VPD_LRDT_RO_DATA); + if (i < 0) + goto out_not_found; + + block_end = i + PCI_VPD_LRDT_TAG_SIZE + + pci_vpd_lrdt_size(&vpd_start[i]); + + i += PCI_VPD_LRDT_TAG_SIZE; + + if (block_end > BNX2X_VPD_LEN) { + vpd_extended_data = kmalloc(block_end, GFP_KERNEL); + if (vpd_extended_data == NULL) + goto out_not_found; + + /* read rest of vpd image into vpd_extended_data */ + memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN); + cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN, + block_end - BNX2X_VPD_LEN, + vpd_extended_data + BNX2X_VPD_LEN); + if (cnt < (block_end - BNX2X_VPD_LEN)) + goto out_not_found; + vpd_data = vpd_extended_data; + } else + vpd_data = vpd_start; + + /* now vpd_data holds full vpd content in both cases */ + + rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, + PCI_VPD_RO_KEYWORD_MFR_ID); + if (rodi < 0) + goto out_not_found; + + len = pci_vpd_info_field_size(&vpd_data[rodi]); + + if (len != VENDOR_ID_LEN) + goto out_not_found; + + rodi += PCI_VPD_INFO_FLD_HDR_SIZE; + + /* vendor specific info */ + snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL); + snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL); + if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) || + !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) { + + rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, + PCI_VPD_RO_KEYWORD_VENDOR0); + if (rodi >= 0) { + len = pci_vpd_info_field_size(&vpd_data[rodi]); + + rodi += PCI_VPD_INFO_FLD_HDR_SIZE; + + if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) { + memcpy(bp->fw_ver, &vpd_data[rodi], len); + bp->fw_ver[len] = ' '; + } + } + kfree(vpd_extended_data); + return; + } +out_not_found: + kfree(vpd_extended_data); + return; +} + +static void bnx2x_set_modes_bitmap(struct bnx2x *bp) +{ + u32 flags = 0; + + if (CHIP_REV_IS_FPGA(bp)) + SET_FLAGS(flags, MODE_FPGA); + else if (CHIP_REV_IS_EMUL(bp)) + SET_FLAGS(flags, MODE_EMUL); + else + SET_FLAGS(flags, MODE_ASIC); + + if (CHIP_MODE_IS_4_PORT(bp)) + SET_FLAGS(flags, MODE_PORT4); + else + SET_FLAGS(flags, MODE_PORT2); + + if (CHIP_IS_E2(bp)) + SET_FLAGS(flags, MODE_E2); + else if (CHIP_IS_E3(bp)) { + SET_FLAGS(flags, MODE_E3); + if (CHIP_REV(bp) == CHIP_REV_Ax) + SET_FLAGS(flags, MODE_E3_A0); + else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/ + SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3); + } + + if (IS_MF(bp)) { + SET_FLAGS(flags, MODE_MF); + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + SET_FLAGS(flags, MODE_MF_SD); + break; + case MULTI_FUNCTION_SI: + SET_FLAGS(flags, MODE_MF_SI); + break; + case MULTI_FUNCTION_AFEX: + SET_FLAGS(flags, MODE_MF_AFEX); + break; + } + } else + SET_FLAGS(flags, MODE_SF); + +#if defined(__LITTLE_ENDIAN) + SET_FLAGS(flags, MODE_LITTLE_ENDIAN); +#else /*(__BIG_ENDIAN)*/ + SET_FLAGS(flags, MODE_BIG_ENDIAN); +#endif + INIT_MODE_FLAGS(bp) = flags; +} + +static int bnx2x_init_bp(struct bnx2x *bp) +{ + int func; + int rc; + + mutex_init(&bp->port.phy_mutex); + mutex_init(&bp->fw_mb_mutex); + mutex_init(&bp->drv_info_mutex); + sema_init(&bp->stats_lock, 1); + bp->drv_info_mng_owner = false; + INIT_LIST_HEAD(&bp->vlan_reg); + + INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); + INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); + INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); + INIT_DELAYED_WORK(&bp->iov_task, bnx2x_iov_task); + if (IS_PF(bp)) { + rc = bnx2x_get_hwinfo(bp); + if (rc) + return rc; + } else { + eth_zero_addr(bp->dev->dev_addr); + } + + bnx2x_set_modes_bitmap(bp); + + rc = bnx2x_alloc_mem_bp(bp); + if (rc) + return rc; + + bnx2x_read_fwinfo(bp); + + func = BP_FUNC(bp); + + /* need to reset chip if undi was active */ + if (IS_PF(bp) && !BP_NOMCP(bp)) { + /* init fw_seq */ + bp->fw_seq = + SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK; + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + + rc = bnx2x_prev_unload(bp); + if (rc) { + bnx2x_free_mem_bp(bp); + return rc; + } + } + + if (CHIP_REV_IS_FPGA(bp)) + dev_err(&bp->pdev->dev, "FPGA detected\n"); + + if (BP_NOMCP(bp) && (func == 0)) + dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n"); + + bp->disable_tpa = disable_tpa; + bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp); + /* Reduce memory usage in kdump environment by disabling TPA */ + bp->disable_tpa |= is_kdump_kernel(); + + /* Set TPA flags */ + if (bp->disable_tpa) { + bp->dev->hw_features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); + bp->dev->features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); + } + + if (CHIP_IS_E1(bp)) + bp->dropless_fc = 0; + else + bp->dropless_fc = dropless_fc | bnx2x_get_dropless_info(bp); + + bp->mrrs = mrrs; + + bp->tx_ring_size = IS_MF_STORAGE_ONLY(bp) ? 0 : MAX_TX_AVAIL; + if (IS_VF(bp)) + bp->rx_ring_size = MAX_RX_AVAIL; + + /* make sure that the numbers are in the right granularity */ + bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; + bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR; + + bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ; + + timer_setup(&bp->timer, bnx2x_timer, 0); + bp->timer.expires = jiffies + bp->current_interval; + + if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) && + SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) && + SHMEM2_HAS(bp, dcbx_en) && + SHMEM2_RD(bp, dcbx_lldp_params_offset) && + SHMEM2_RD(bp, dcbx_lldp_dcbx_stat_offset) && + SHMEM2_RD(bp, dcbx_en[BP_PORT(bp)])) { + bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON); + bnx2x_dcbx_init_params(bp); + } else { + bnx2x_dcbx_set_state(bp, false, BNX2X_DCBX_ENABLED_OFF); + } + + if (CHIP_IS_E1x(bp)) + bp->cnic_base_cl_id = FP_SB_MAX_E1x; + else + bp->cnic_base_cl_id = FP_SB_MAX_E2; + + /* multiple tx priority */ + if (IS_VF(bp)) + bp->max_cos = 1; + else if (CHIP_IS_E1x(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E1X; + else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; + else if (CHIP_IS_E3B0(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; + else + BNX2X_ERR("unknown chip %x revision %x\n", + CHIP_NUM(bp), CHIP_REV(bp)); + BNX2X_DEV_INFO("set bp->max_cos to %d\n", bp->max_cos); + + /* We need at least one default status block for slow-path events, + * second status block for the L2 queue, and a third status block for + * CNIC if supported. + */ + if (IS_VF(bp)) + bp->min_msix_vec_cnt = 1; + else if (CNIC_SUPPORT(bp)) + bp->min_msix_vec_cnt = 3; + else /* PF w/o cnic */ + bp->min_msix_vec_cnt = 2; + BNX2X_DEV_INFO("bp->min_msix_vec_cnt %d", bp->min_msix_vec_cnt); + + bp->dump_preset_idx = 1; + + if (CHIP_IS_E3B0(bp)) + bp->flags |= PTP_SUPPORTED; + + return rc; +} + +/**************************************************************************** +* General service functions +****************************************************************************/ + +/* + * net_device service functions + */ + +/* called with rtnl_lock */ +static int bnx2x_open(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc; + + bp->stats_init = true; + + netif_carrier_off(dev); + + bnx2x_set_power_state(bp, PCI_D0); + + /* If parity had happen during the unload, then attentions + * and/or RECOVERY_IN_PROGRES may still be set. In this case we + * want the first function loaded on the current engine to + * complete the recovery. + * Parity recovery is only relevant for PF driver. + */ + if (IS_PF(bp)) { + int other_engine = BP_PATH(bp) ? 0 : 1; + bool other_load_status, load_status; + bool global = false; + + other_load_status = bnx2x_get_load_status(bp, other_engine); + load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); + if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || + bnx2x_chk_parity_attn(bp, &global, true)) { + do { + /* If there are attentions and they are in a + * global blocks, set the GLOBAL_RESET bit + * regardless whether it will be this function + * that will complete the recovery or not. + */ + if (global) + bnx2x_set_reset_global(bp); + + /* Only the first function on the current + * engine should try to recover in open. In case + * of attentions in global blocks only the first + * in the chip should try to recover. + */ + if ((!load_status && + (!global || !other_load_status)) && + bnx2x_trylock_leader_lock(bp) && + !bnx2x_leader_reset(bp)) { + netdev_info(bp->dev, + "Recovered in open\n"); + break; + } + + /* recovery has failed... */ + bnx2x_set_power_state(bp, PCI_D3hot); + bp->recovery_state = BNX2X_RECOVERY_FAILED; + + BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n" + "If you still see this message after a few retries then power cycle is required.\n"); + + return -EAGAIN; + } while (0); + } + } + + bp->recovery_state = BNX2X_RECOVERY_DONE; + rc = bnx2x_nic_load(bp, LOAD_OPEN); + if (rc) + return rc; + + if (IS_PF(bp)) + udp_tunnel_get_rx_info(dev); + + return 0; +} + +/* called with rtnl_lock */ +static int bnx2x_close(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* Unload the driver, release IRQs */ + bnx2x_nic_unload(bp, UNLOAD_CLOSE, false); + + return 0; +} + +struct bnx2x_mcast_list_elem_group +{ + struct list_head mcast_group_link; + struct bnx2x_mcast_list_elem mcast_elems[]; +}; + +#define MCAST_ELEMS_PER_PG \ + ((PAGE_SIZE - sizeof(struct bnx2x_mcast_list_elem_group)) / \ + sizeof(struct bnx2x_mcast_list_elem)) + +static void bnx2x_free_mcast_macs_list(struct list_head *mcast_group_list) +{ + struct bnx2x_mcast_list_elem_group *current_mcast_group; + + while (!list_empty(mcast_group_list)) { + current_mcast_group = list_first_entry(mcast_group_list, + struct bnx2x_mcast_list_elem_group, + mcast_group_link); + list_del(¤t_mcast_group->mcast_group_link); + free_page((unsigned long)current_mcast_group); + } +} + +static int bnx2x_init_mcast_macs_list(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + struct list_head *mcast_group_list) +{ + struct bnx2x_mcast_list_elem *mc_mac; + struct netdev_hw_addr *ha; + struct bnx2x_mcast_list_elem_group *current_mcast_group = NULL; + int mc_count = netdev_mc_count(bp->dev); + int offset = 0; + + INIT_LIST_HEAD(&p->mcast_list); + netdev_for_each_mc_addr(ha, bp->dev) { + if (!offset) { + current_mcast_group = + (struct bnx2x_mcast_list_elem_group *) + __get_free_page(GFP_ATOMIC); + if (!current_mcast_group) { + bnx2x_free_mcast_macs_list(mcast_group_list); + BNX2X_ERR("Failed to allocate mc MAC list\n"); + return -ENOMEM; + } + list_add(¤t_mcast_group->mcast_group_link, + mcast_group_list); + } + mc_mac = ¤t_mcast_group->mcast_elems[offset]; + mc_mac->mac = bnx2x_mc_addr(ha); + list_add_tail(&mc_mac->link, &p->mcast_list); + offset++; + if (offset == MCAST_ELEMS_PER_PG) + offset = 0; + } + p->mcast_list_len = mc_count; + return 0; +} + +/** + * bnx2x_set_uc_list - configure a new unicast MACs list. + * + * @bp: driver handle + * + * We will use zero (0) as a MAC type for these MACs. + */ +static int bnx2x_set_uc_list(struct bnx2x *bp) +{ + int rc; + struct net_device *dev = bp->dev; + struct netdev_hw_addr *ha; + struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj; + unsigned long ramrod_flags = 0; + + /* First schedule a cleanup up of old configuration */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false); + if (rc < 0) { + BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc); + return rc; + } + + netdev_for_each_uc_addr(ha, dev) { + rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, + BNX2X_UC_LIST_MAC, &ramrod_flags); + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, + "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + + } else if (rc < 0) { + + BNX2X_ERR("Failed to schedule ADD operations: %d\n", + rc); + return rc; + } + } + + /* Execute the pending commands */ + __set_bit(RAMROD_CONT, &ramrod_flags); + return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */, + BNX2X_UC_LIST_MAC, &ramrod_flags); +} + +static int bnx2x_set_mc_list_e1x(struct bnx2x *bp) +{ + LIST_HEAD(mcast_group_list); + struct net_device *dev = bp->dev; + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + int rc = 0; + + rparam.mcast_obj = &bp->mcast_obj; + + /* first, clear all configured multicast MACs */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) { + BNX2X_ERR("Failed to clear multicast configuration: %d\n", rc); + return rc; + } + + /* then, configure a new MACs list */ + if (netdev_mc_count(dev)) { + rc = bnx2x_init_mcast_macs_list(bp, &rparam, &mcast_group_list); + if (rc) + return rc; + + /* Now add the new MACs */ + rc = bnx2x_config_mcast(bp, &rparam, + BNX2X_MCAST_CMD_ADD); + if (rc < 0) + BNX2X_ERR("Failed to set a new multicast configuration: %d\n", + rc); + + bnx2x_free_mcast_macs_list(&mcast_group_list); + } + + return rc; +} + +static int bnx2x_set_mc_list(struct bnx2x *bp) +{ + LIST_HEAD(mcast_group_list); + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + struct net_device *dev = bp->dev; + int rc = 0; + + /* On older adapters, we need to flush and re-add filters */ + if (CHIP_IS_E1x(bp)) + return bnx2x_set_mc_list_e1x(bp); + + rparam.mcast_obj = &bp->mcast_obj; + + if (netdev_mc_count(dev)) { + rc = bnx2x_init_mcast_macs_list(bp, &rparam, &mcast_group_list); + if (rc) + return rc; + + /* Override the curently configured set of mc filters */ + rc = bnx2x_config_mcast(bp, &rparam, + BNX2X_MCAST_CMD_SET); + if (rc < 0) + BNX2X_ERR("Failed to set a new multicast configuration: %d\n", + rc); + + bnx2x_free_mcast_macs_list(&mcast_group_list); + } else { + /* If no mc addresses are required, flush the configuration */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) + BNX2X_ERR("Failed to clear multicast configuration %d\n", + rc); + } + + return rc; +} + +/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */ +static void bnx2x_set_rx_mode(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); + return; + } else { + /* Schedule an SP task to handle rest of change */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_RX_MODE, + NETIF_MSG_IFUP); + } +} + +void bnx2x_set_rx_mode_inner(struct bnx2x *bp) +{ + u32 rx_mode = BNX2X_RX_MODE_NORMAL; + + DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags); + + netif_addr_lock_bh(bp->dev); + + if (bp->dev->flags & IFF_PROMISC) { + rx_mode = BNX2X_RX_MODE_PROMISC; + } else if ((bp->dev->flags & IFF_ALLMULTI) || + ((netdev_mc_count(bp->dev) > BNX2X_MAX_MULTICAST) && + CHIP_IS_E1(bp))) { + rx_mode = BNX2X_RX_MODE_ALLMULTI; + } else { + if (IS_PF(bp)) { + /* some multicasts */ + if (bnx2x_set_mc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_ALLMULTI; + + /* release bh lock, as bnx2x_set_uc_list might sleep */ + netif_addr_unlock_bh(bp->dev); + if (bnx2x_set_uc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_PROMISC; + netif_addr_lock_bh(bp->dev); + } else { + /* configuring mcast to a vf involves sleeping (when we + * wait for the pf's response). + */ + bnx2x_schedule_sp_rtnl(bp, + BNX2X_SP_RTNL_VFPF_MCAST, 0); + } + } + + bp->rx_mode = rx_mode; + /* handle ISCSI SD mode */ + if (IS_MF_ISCSI_ONLY(bp)) + bp->rx_mode = BNX2X_RX_MODE_NONE; + + /* Schedule the rx_mode command */ + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) { + set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); + netif_addr_unlock_bh(bp->dev); + return; + } + + if (IS_PF(bp)) { + bnx2x_set_storm_rx_mode(bp); + netif_addr_unlock_bh(bp->dev); + } else { + /* VF will need to request the PF to make this change, and so + * the VF needs to release the bottom-half lock prior to the + * request (as it will likely require sleep on the VF side) + */ + netif_addr_unlock_bh(bp->dev); + bnx2x_vfpf_storm_rx_mode(bp); + } +} + +/* called with rtnl_lock */ +static int bnx2x_mdio_read(struct net_device *netdev, int prtad, + int devad, u16 addr) +{ + struct bnx2x *bp = netdev_priv(netdev); + u16 value; + int rc; + + DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n", + prtad, devad, addr); + + /* The HW expects different devad if CL22 is used */ + devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value); + bnx2x_release_phy_lock(bp); + DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc); + + if (!rc) + rc = value; + return rc; +} + +/* called with rtnl_lock */ +static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad, + u16 addr, u16 value) +{ + struct bnx2x *bp = netdev_priv(netdev); + int rc; + + DP(NETIF_MSG_LINK, + "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x, value 0x%x\n", + prtad, devad, addr, value); + + /* The HW expects different devad if CL22 is used */ + devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value); + bnx2x_release_phy_lock(bp); + return rc; +} + +/* called with rtnl_lock */ +static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct bnx2x *bp = netdev_priv(dev); + struct mii_ioctl_data *mdio = if_mii(ifr); + + if (!netif_running(dev)) + return -EAGAIN; + + switch (cmd) { + case SIOCSHWTSTAMP: + return bnx2x_hwtstamp_ioctl(bp, ifr); + default: + DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", + mdio->phy_id, mdio->reg_num, mdio->val_in); + return mdio_mii_ioctl(&bp->mdio, mdio, cmd); + } +} + +static int bnx2x_validate_addr(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* query the bulletin board for mac address configured by the PF */ + if (IS_VF(bp)) + bnx2x_sample_bulletin(bp); + + if (!is_valid_ether_addr(dev->dev_addr)) { + BNX2X_ERR("Non-valid Ethernet address\n"); + return -EADDRNOTAVAIL; + } + return 0; +} + +static int bnx2x_get_phys_port_id(struct net_device *netdev, + struct netdev_phys_item_id *ppid) +{ + struct bnx2x *bp = netdev_priv(netdev); + + if (!(bp->flags & HAS_PHYS_PORT_ID)) + return -EOPNOTSUPP; + + ppid->id_len = sizeof(bp->phys_port_id); + memcpy(ppid->id, bp->phys_port_id, ppid->id_len); + + return 0; +} + +static netdev_features_t bnx2x_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) +{ + /* + * A skb with gso_size + header length > 9700 will cause a + * firmware panic. Drop GSO support. + * + * Eventually the upper layer should not pass these packets down. + * + * For speed, if the gso_size is <= 9000, assume there will + * not be 700 bytes of headers and pass it through. Only do a + * full (slow) validation if the gso_size is > 9000. + * + * (Due to the way SKB_BY_FRAGS works this will also do a full + * validation in that case.) + */ + if (unlikely(skb_is_gso(skb) && + (skb_shinfo(skb)->gso_size > 9000) && + !skb_gso_validate_mac_len(skb, 9700))) + features &= ~NETIF_F_GSO_MASK; + + features = vlan_features_check(skb, features); + return vxlan_features_check(skb, features); +} + +static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add) +{ + int rc; + + if (IS_PF(bp)) { + unsigned long ramrod_flags = 0; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + rc = bnx2x_set_vlan_one(bp, vid, &bp->sp_objs->vlan_obj, + add, &ramrod_flags); + } else { + rc = bnx2x_vfpf_update_vlan(bp, vid, bp->fp->index, add); + } + + return rc; +} + +static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp) +{ + struct bnx2x_vlan_entry *vlan; + int rc = 0; + + /* Configure all non-configured entries */ + list_for_each_entry(vlan, &bp->vlan_reg, link) { + if (vlan->hw) + continue; + + if (bp->vlan_cnt >= bp->vlan_credit) + return -ENOBUFS; + + rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); + if (rc) { + BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid); + return rc; + } + + DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid); + vlan->hw = true; + bp->vlan_cnt++; + } + + return 0; +} + +static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode) +{ + bool need_accept_any_vlan; + + need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp); + + if (bp->accept_any_vlan != need_accept_any_vlan) { + bp->accept_any_vlan = need_accept_any_vlan; + DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n", + bp->accept_any_vlan ? "raised" : "cleared"); + if (set_rx_mode) { + if (IS_PF(bp)) + bnx2x_set_rx_mode_inner(bp); + else + bnx2x_vfpf_storm_rx_mode(bp); + } + } +} + +int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) +{ + /* Don't set rx mode here. Our caller will do it. */ + bnx2x_vlan_configure(bp, false); + + return 0; +} + +static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) +{ + struct bnx2x *bp = netdev_priv(dev); + struct bnx2x_vlan_entry *vlan; + + DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid); + + vlan = kmalloc(sizeof(*vlan), GFP_KERNEL); + if (!vlan) + return -ENOMEM; + + vlan->vid = vid; + vlan->hw = false; + list_add_tail(&vlan->link, &bp->vlan_reg); + + if (netif_running(dev)) + bnx2x_vlan_configure(bp, true); + + return 0; +} + +static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) +{ + struct bnx2x *bp = netdev_priv(dev); + struct bnx2x_vlan_entry *vlan; + bool found = false; + int rc = 0; + + DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid); + + list_for_each_entry(vlan, &bp->vlan_reg, link) + if (vlan->vid == vid) { + found = true; + break; + } + + if (!found) { + BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid); + return -EINVAL; + } + + if (netif_running(dev) && vlan->hw) { + rc = __bnx2x_vlan_configure_vid(bp, vid, false); + DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid); + bp->vlan_cnt--; + } + + list_del(&vlan->link); + kfree(vlan); + + if (netif_running(dev)) + bnx2x_vlan_configure(bp, true); + + DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc); + + return rc; +} + +static const struct net_device_ops bnx2x_netdev_ops = { + .ndo_open = bnx2x_open, + .ndo_stop = bnx2x_close, + .ndo_start_xmit = bnx2x_start_xmit, + .ndo_select_queue = bnx2x_select_queue, + .ndo_set_rx_mode = bnx2x_set_rx_mode, + .ndo_set_mac_address = bnx2x_change_mac_addr, + .ndo_validate_addr = bnx2x_validate_addr, + .ndo_do_ioctl = bnx2x_ioctl, + .ndo_change_mtu = bnx2x_change_mtu, + .ndo_fix_features = bnx2x_fix_features, + .ndo_set_features = bnx2x_set_features, + .ndo_tx_timeout = bnx2x_tx_timeout, + .ndo_vlan_rx_add_vid = bnx2x_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = bnx2x_vlan_rx_kill_vid, + .ndo_setup_tc = __bnx2x_setup_tc, +#ifdef CONFIG_BNX2X_SRIOV + .ndo_set_vf_mac = bnx2x_set_vf_mac, + .ndo_set_vf_vlan = bnx2x_set_vf_vlan, + .ndo_get_vf_config = bnx2x_get_vf_config, +#endif +#ifdef NETDEV_FCOE_WWNN + .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, +#endif + + .ndo_get_phys_port_id = bnx2x_get_phys_port_id, + .ndo_set_vf_link_state = bnx2x_set_vf_link_state, + .ndo_features_check = bnx2x_features_check, + .ndo_udp_tunnel_add = bnx2x_udp_tunnel_add, + .ndo_udp_tunnel_del = bnx2x_udp_tunnel_del, +}; + +static int bnx2x_set_coherency_mask(struct bnx2x *bp) +{ + struct device *dev = &bp->pdev->dev; + + if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) != 0 && + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)) != 0) { + dev_err(dev, "System does not support DMA, aborting\n"); + return -EIO; + } + + return 0; +} + +static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp) +{ + if (bp->flags & AER_ENABLED) { + pci_disable_pcie_error_reporting(bp->pdev); + bp->flags &= ~AER_ENABLED; + } +} + +static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, + struct net_device *dev, unsigned long board_type) +{ + int rc; + u32 pci_cfg_dword; + bool chip_is_e1x = (board_type == BCM57710 || + board_type == BCM57711 || + board_type == BCM57711E); + + SET_NETDEV_DEV(dev, &pdev->dev); + + bp->dev = dev; + bp->pdev = pdev; + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&bp->pdev->dev, + "Cannot enable PCI device, aborting\n"); + goto err_out; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, + "Cannot find PCI device base address, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + pci_read_config_dword(pdev, PCICFG_REVISION_ID_OFFSET, &pci_cfg_dword); + if ((pci_cfg_dword & PCICFG_REVESION_ID_MASK) == + PCICFG_REVESION_ID_ERROR_VAL) { + pr_err("PCI device error, probably due to fan failure, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + if (atomic_read(&pdev->enable_cnt) == 1) { + rc = pci_request_regions(pdev, DRV_MODULE_NAME); + if (rc) { + dev_err(&bp->pdev->dev, + "Cannot obtain PCI resources, aborting\n"); + goto err_out_disable; + } + + pci_set_master(pdev); + pci_save_state(pdev); + } + + if (IS_PF(bp)) { + if (!pdev->pm_cap) { + dev_err(&bp->pdev->dev, + "Cannot find power management capability, aborting\n"); + rc = -EIO; + goto err_out_release; + } + } + + if (!pci_is_pcie(pdev)) { + dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n"); + rc = -EIO; + goto err_out_release; + } + + rc = bnx2x_set_coherency_mask(bp); + if (rc) + goto err_out_release; + + dev->mem_start = pci_resource_start(pdev, 0); + dev->base_addr = dev->mem_start; + dev->mem_end = pci_resource_end(pdev, 0); + + dev->irq = pdev->irq; + + bp->regview = pci_ioremap_bar(pdev, 0); + if (!bp->regview) { + dev_err(&bp->pdev->dev, + "Cannot map register space, aborting\n"); + rc = -ENOMEM; + goto err_out_release; + } + + /* In E1/E1H use pci device function given by kernel. + * In E2/E3 read physical function from ME register since these chips + * support Physical Device Assignment where kernel BDF maybe arbitrary + * (depending on hypervisor). + */ + if (chip_is_e1x) { + bp->pf_num = PCI_FUNC(pdev->devfn); + } else { + /* chip is E2/3*/ + pci_read_config_dword(bp->pdev, + PCICFG_ME_REGISTER, &pci_cfg_dword); + bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >> + ME_REG_ABS_PF_NUM_SHIFT); + } + BNX2X_DEV_INFO("me reg PF num: %d\n", bp->pf_num); + + /* clean indirect addresses */ + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); + + /* Set PCIe reset type to fundamental for EEH recovery */ + pdev->needs_freset = 1; + + /* AER (Advanced Error reporting) configuration */ + rc = pci_enable_pcie_error_reporting(pdev); + if (!rc) + bp->flags |= AER_ENABLED; + else + BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc); + + /* + * Clean the following indirect addresses for all functions since it + * is not used by the driver. + */ + if (IS_PF(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + + if (chip_is_e1x) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } + + /* Enable internal target-read (in case we are probed after PF + * FLR). Must be done prior to any BAR read access. Only for + * 57712 and up + */ + if (!chip_is_e1x) + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + } + + dev->watchdog_timeo = TX_TIMEOUT; + + dev->netdev_ops = &bnx2x_netdev_ops; + bnx2x_set_ethtool_ops(bp, dev); + + dev->priv_flags |= IFF_UNICAST_FLT; + + dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | + NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | NETIF_F_GRO_HW | + NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX; + if (!chip_is_e1x) { + dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | + NETIF_F_GSO_IPXIP4 | + NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_GSO_UDP_TUNNEL_CSUM | + NETIF_F_GSO_PARTIAL; + + dev->hw_enc_features = + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | + NETIF_F_GSO_IPXIP4 | + NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | + NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | + NETIF_F_GSO_PARTIAL; + + dev->gso_partial_features = NETIF_F_GSO_GRE_CSUM | + NETIF_F_GSO_UDP_TUNNEL_CSUM; + } + + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; + + if (IS_PF(bp)) { + if (chip_is_e1x) + bp->accept_any_vlan = true; + else + dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; + } + /* For VF we'll know whether to enable VLAN filtering after + * getting a response to CHANNEL_TLV_ACQUIRE from PF. + */ + + dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; + dev->features |= NETIF_F_HIGHDMA; + if (dev->features & NETIF_F_LRO) + dev->features &= ~NETIF_F_GRO_HW; + + /* Add Loopback capability to the device */ + dev->hw_features |= NETIF_F_LOOPBACK; + +#ifdef BCM_DCBNL + dev->dcbnl_ops = &bnx2x_dcbnl_ops; +#endif + + /* MTU range, 46 - 9600 */ + dev->min_mtu = ETH_MIN_PACKET_SIZE; + dev->max_mtu = ETH_MAX_JUMBO_PACKET_SIZE; + + /* get_port_hwinfo() will set prtad and mmds properly */ + bp->mdio.prtad = MDIO_PRTAD_NONE; + bp->mdio.mmds = 0; + bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + bp->mdio.dev = dev; + bp->mdio.mdio_read = bnx2x_mdio_read; + bp->mdio.mdio_write = bnx2x_mdio_write; + + return 0; + +err_out_release: + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + +err_out_disable: + pci_disable_device(pdev); + +err_out: + return rc; +} + +static int bnx2x_check_firmware(struct bnx2x *bp) +{ + const struct firmware *firmware = bp->firmware; + struct bnx2x_fw_file_hdr *fw_hdr; + struct bnx2x_fw_file_section *sections; + u32 offset, len, num_ops; + __be16 *ops_offsets; + int i; + const u8 *fw_ver; + + if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) { + BNX2X_ERR("Wrong FW size\n"); + return -EINVAL; + } + + fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data; + sections = (struct bnx2x_fw_file_section *)fw_hdr; + + /* Make sure none of the offsets and sizes make us read beyond + * the end of the firmware data */ + for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) { + offset = be32_to_cpu(sections[i].offset); + len = be32_to_cpu(sections[i].len); + if (offset + len > firmware->size) { + BNX2X_ERR("Section %d length is out of bounds\n", i); + return -EINVAL; + } + } + + /* Likewise for the init_ops offsets */ + offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); + ops_offsets = (__force __be16 *)(firmware->data + offset); + num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); + + for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { + if (be16_to_cpu(ops_offsets[i]) > num_ops) { + BNX2X_ERR("Section offset %d is out of bounds\n", i); + return -EINVAL; + } + } + + /* Check FW version */ + offset = be32_to_cpu(fw_hdr->fw_version.offset); + fw_ver = firmware->data + offset; + if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) || + (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || + (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || + (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { + BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n", + fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3], + BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_ENGINEERING_VERSION); + return -EINVAL; + } + + return 0; +} + +static void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + u32 *target = (u32 *)_target; + u32 i; + + for (i = 0; i < n/4; i++) + target[i] = be32_to_cpu(source[i]); +} + +/* + Ops array is stored in the following format: + {op(8bit), offset(24bit, big endian), data(32bit, big endian)} + */ +static void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + struct raw_op *target = (struct raw_op *)_target; + u32 i, j, tmp; + + for (i = 0, j = 0; i < n/8; i++, j += 2) { + tmp = be32_to_cpu(source[j]); + target[i].op = (tmp >> 24) & 0xff; + target[i].offset = tmp & 0xffffff; + target[i].raw_data = be32_to_cpu(source[j + 1]); + } +} + +/* IRO array is stored in the following format: + * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) } + */ +static void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + struct iro *target = (struct iro *)_target; + u32 i, j, tmp; + + for (i = 0, j = 0; i < n/sizeof(struct iro); i++) { + target[i].base = be32_to_cpu(source[j]); + j++; + tmp = be32_to_cpu(source[j]); + target[i].m1 = (tmp >> 16) & 0xffff; + target[i].m2 = tmp & 0xffff; + j++; + tmp = be32_to_cpu(source[j]); + target[i].m3 = (tmp >> 16) & 0xffff; + target[i].size = tmp & 0xffff; + j++; + } +} + +static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + const __be16 *source = (const __be16 *)_source; + u16 *target = (u16 *)_target; + u32 i; + + for (i = 0; i < n/2; i++) + target[i] = be16_to_cpu(source[i]); +} + +#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ +do { \ + u32 len = be32_to_cpu(fw_hdr->arr.len); \ + bp->arr = kmalloc(len, GFP_KERNEL); \ + if (!bp->arr) \ + goto lbl; \ + func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ + (u8 *)bp->arr, len); \ +} while (0) + +static int bnx2x_init_firmware(struct bnx2x *bp) +{ + const char *fw_file_name; + struct bnx2x_fw_file_hdr *fw_hdr; + int rc; + + if (bp->firmware) + return 0; + + if (CHIP_IS_E1(bp)) + fw_file_name = FW_FILE_NAME_E1; + else if (CHIP_IS_E1H(bp)) + fw_file_name = FW_FILE_NAME_E1H; + else if (!CHIP_IS_E1x(bp)) + fw_file_name = FW_FILE_NAME_E2; + else { + BNX2X_ERR("Unsupported chip revision\n"); + return -EINVAL; + } + BNX2X_DEV_INFO("Loading %s\n", fw_file_name); + + rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); + if (rc) { + BNX2X_ERR("Can't load firmware file %s\n", + fw_file_name); + goto request_firmware_exit; + } + + rc = bnx2x_check_firmware(bp); + if (rc) { + BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } + + fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; + + /* Initialize the pointers to the init arrays */ + /* Blob */ + rc = -ENOMEM; + BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n); + + /* Opcodes */ + BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); + + /* Offsets */ + BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, + be16_to_cpu_n); + + /* STORMs firmware */ + INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_int_table_data.offset); + INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_pram_data.offset); + INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_int_table_data.offset); + INIT_USEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_pram_data.offset); + INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_int_table_data.offset); + INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_pram_data.offset); + INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_int_table_data.offset); + INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_pram_data.offset); + /* IRO */ + BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro); + + return 0; + +iro_alloc_err: + kfree(bp->init_ops_offsets); +init_offsets_alloc_err: + kfree(bp->init_ops); +init_ops_alloc_err: + kfree(bp->init_data); +request_firmware_exit: + release_firmware(bp->firmware); + bp->firmware = NULL; + + return rc; +} + +static void bnx2x_release_firmware(struct bnx2x *bp) +{ + kfree(bp->init_ops_offsets); + kfree(bp->init_ops); + kfree(bp->init_data); + release_firmware(bp->firmware); + bp->firmware = NULL; +} + +static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = { + .init_hw_cmn_chip = bnx2x_init_hw_common_chip, + .init_hw_cmn = bnx2x_init_hw_common, + .init_hw_port = bnx2x_init_hw_port, + .init_hw_func = bnx2x_init_hw_func, + + .reset_hw_cmn = bnx2x_reset_common, + .reset_hw_port = bnx2x_reset_port, + .reset_hw_func = bnx2x_reset_func, + + .gunzip_init = bnx2x_gunzip_init, + .gunzip_end = bnx2x_gunzip_end, + + .init_fw = bnx2x_init_firmware, + .release_fw = bnx2x_release_firmware, +}; + +void bnx2x__init_func_obj(struct bnx2x *bp) +{ + /* Prepare DMAE related driver resources */ + bnx2x_setup_dmae(bp); + + bnx2x_init_func_obj(bp, &bp->func_obj, + bnx2x_sp(bp, func_rdata), + bnx2x_sp_mapping(bp, func_rdata), + bnx2x_sp(bp, func_afex_rdata), + bnx2x_sp_mapping(bp, func_afex_rdata), + &bnx2x_func_sp_drv); +} + +/* must be called after sriov-enable */ +static int bnx2x_set_qm_cid_count(struct bnx2x *bp) +{ + int cid_count = BNX2X_L2_MAX_CID(bp); + + if (IS_SRIOV(bp)) + cid_count += BNX2X_VF_CIDS; + + if (CNIC_SUPPORT(bp)) + cid_count += CNIC_CID_MAX; + + return roundup(cid_count, QM_CID_ROUND); +} + +/** + * bnx2x_get_num_none_def_sbs - return the number of none default SBs + * + * @dev: pci device + * + */ +static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev, int cnic_cnt) +{ + int index; + u16 control = 0; + + /* + * If MSI-X is not supported - return number of SBs needed to support + * one fast path queue: one FP queue + SB for CNIC + */ + if (!pdev->msix_cap) { + dev_info(&pdev->dev, "no msix capability found\n"); + return 1 + cnic_cnt; + } + dev_info(&pdev->dev, "msix capability found\n"); + + /* + * The value in the PCI configuration space is the index of the last + * entry, namely one less than the actual size of the table, which is + * exactly what we want to return from this function: number of all SBs + * without the default SB. + * For VFs there is no default SB, then we return (index+1). + */ + pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control); + + index = control & PCI_MSIX_FLAGS_QSIZE; + + return index; +} + +static int set_max_cos_est(int chip_id) +{ + switch (chip_id) { + case BCM57710: + case BCM57711: + case BCM57711E: + return BNX2X_MULTI_TX_COS_E1X; + case BCM57712: + case BCM57712_MF: + return BNX2X_MULTI_TX_COS_E2_E3A0; + case BCM57800: + case BCM57800_MF: + case BCM57810: + case BCM57810_MF: + case BCM57840_4_10: + case BCM57840_2_20: + case BCM57840_O: + case BCM57840_MFO: + case BCM57840_MF: + case BCM57811: + case BCM57811_MF: + return BNX2X_MULTI_TX_COS_E3B0; + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: + return 1; + default: + pr_err("Unknown board_type (%d), aborting\n", chip_id); + return -ENODEV; + } +} + +static int set_is_vf(int chip_id) +{ + switch (chip_id) { + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: + return true; + default: + return false; + } +} + +/* nig_tsgen registers relative address */ +#define tsgen_ctrl 0x0 +#define tsgen_freecount 0x10 +#define tsgen_synctime_t0 0x20 +#define tsgen_offset_t0 0x28 +#define tsgen_drift_t0 0x30 +#define tsgen_synctime_t1 0x58 +#define tsgen_offset_t1 0x60 +#define tsgen_drift_t1 0x68 + +/* FW workaround for setting drift */ +static int bnx2x_send_update_drift_ramrod(struct bnx2x *bp, int drift_dir, + int best_val, int best_period) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_set_timesync_params *set_timesync_params = + &func_params.params.set_timesync; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; + + /* Function parameters */ + set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_SET; + set_timesync_params->offset_cmd = TS_OFFSET_KEEP; + set_timesync_params->add_sub_drift_adjust_value = + drift_dir ? TS_ADD_VALUE : TS_SUB_VALUE; + set_timesync_params->drift_adjust_value = best_val; + set_timesync_params->drift_adjust_period = best_period; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + int rc; + int drift_dir = 1; + int val, period, period1, period2, dif, dif1, dif2; + int best_dif = BNX2X_MAX_PHC_DRIFT, best_period = 0, best_val = 0; + + DP(BNX2X_MSG_PTP, "PTP adjfreq called, ppb = %d\n", ppb); + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_PTP, + "PTP adjfreq called while the interface is down\n"); + return -ENETDOWN; + } + + if (ppb < 0) { + ppb = -ppb; + drift_dir = 0; + } + + if (ppb == 0) { + best_val = 1; + best_period = 0x1FFFFFF; + } else if (ppb >= BNX2X_MAX_PHC_DRIFT) { + best_val = 31; + best_period = 1; + } else { + /* Changed not to allow val = 8, 16, 24 as these values + * are not supported in workaround. + */ + for (val = 0; val <= 31; val++) { + if ((val & 0x7) == 0) + continue; + period1 = val * 1000000 / ppb; + period2 = period1 + 1; + if (period1 != 0) + dif1 = ppb - (val * 1000000 / period1); + else + dif1 = BNX2X_MAX_PHC_DRIFT; + if (dif1 < 0) + dif1 = -dif1; + dif2 = ppb - (val * 1000000 / period2); + if (dif2 < 0) + dif2 = -dif2; + dif = (dif1 < dif2) ? dif1 : dif2; + period = (dif1 < dif2) ? period1 : period2; + if (dif < best_dif) { + best_dif = dif; + best_val = val; + best_period = period; + } + } + } + + rc = bnx2x_send_update_drift_ramrod(bp, drift_dir, best_val, + best_period); + if (rc) { + BNX2X_ERR("Failed to set drift\n"); + return -EFAULT; + } + + DP(BNX2X_MSG_PTP, "Configured val = %d, period = %d\n", best_val, + best_period); + + return 0; +} + +static int bnx2x_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_PTP, + "PTP adjtime called while the interface is down\n"); + return -ENETDOWN; + } + + DP(BNX2X_MSG_PTP, "PTP adjtime called, delta = %llx\n", delta); + + timecounter_adjtime(&bp->timecounter, delta); + + return 0; +} + +static int bnx2x_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 ns; + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_PTP, + "PTP gettime called while the interface is down\n"); + return -ENETDOWN; + } + + ns = timecounter_read(&bp->timecounter); + + DP(BNX2X_MSG_PTP, "PTP gettime called, ns = %llu\n", ns); + + *ts = ns_to_timespec64(ns); + + return 0; +} + +static int bnx2x_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + u64 ns; + + if (!netif_running(bp->dev)) { + DP(BNX2X_MSG_PTP, + "PTP settime called while the interface is down\n"); + return -ENETDOWN; + } + + ns = timespec64_to_ns(ts); + + DP(BNX2X_MSG_PTP, "PTP settime called, ns = %llu\n", ns); + + /* Re-init the timecounter */ + timecounter_init(&bp->timecounter, &bp->cyclecounter, ns); + + return 0; +} + +/* Enable (or disable) ancillary features of the phc subsystem */ +static int bnx2x_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct bnx2x *bp = container_of(ptp, struct bnx2x, ptp_clock_info); + + BNX2X_ERR("PHC ancillary features are not supported\n"); + return -ENOTSUPP; +} + +static void bnx2x_register_phc(struct bnx2x *bp) +{ + /* Fill the ptp_clock_info struct and register PTP clock*/ + bp->ptp_clock_info.owner = THIS_MODULE; + snprintf(bp->ptp_clock_info.name, 16, "%s", bp->dev->name); + bp->ptp_clock_info.max_adj = BNX2X_MAX_PHC_DRIFT; /* In PPB */ + bp->ptp_clock_info.n_alarm = 0; + bp->ptp_clock_info.n_ext_ts = 0; + bp->ptp_clock_info.n_per_out = 0; + bp->ptp_clock_info.pps = 0; + bp->ptp_clock_info.adjfreq = bnx2x_ptp_adjfreq; + bp->ptp_clock_info.adjtime = bnx2x_ptp_adjtime; + bp->ptp_clock_info.gettime64 = bnx2x_ptp_gettime; + bp->ptp_clock_info.settime64 = bnx2x_ptp_settime; + bp->ptp_clock_info.enable = bnx2x_ptp_enable; + + bp->ptp_clock = ptp_clock_register(&bp->ptp_clock_info, &bp->pdev->dev); + if (IS_ERR(bp->ptp_clock)) { + bp->ptp_clock = NULL; + BNX2X_ERR("PTP clock registration failed\n"); + } +} + +static int bnx2x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct bnx2x *bp; + int rc, max_non_def_sbs; + int rx_count, tx_count, rss_count, doorbell_size; + int max_cos_est; + bool is_vf; + int cnic_cnt; + + /* Management FW 'remembers' living interfaces. Allow it some time + * to forget previously living interfaces, allowing a proper re-load. + */ + if (is_kdump_kernel()) { + ktime_t now = ktime_get_boottime(); + ktime_t fw_ready_time = ktime_set(5, 0); + + if (ktime_before(now, fw_ready_time)) + msleep(ktime_ms_delta(fw_ready_time, now)); + } + + /* An estimated maximum supported CoS number according to the chip + * version. + * We will try to roughly estimate the maximum number of CoSes this chip + * may support in order to minimize the memory allocated for Tx + * netdev_queue's. This number will be accurately calculated during the + * initialization of bp->max_cos based on the chip versions AND chip + * revision in the bnx2x_init_bp(). + */ + max_cos_est = set_max_cos_est(ent->driver_data); + if (max_cos_est < 0) + return max_cos_est; + is_vf = set_is_vf(ent->driver_data); + cnic_cnt = is_vf ? 0 : 1; + + max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt); + + /* add another SB for VF as it has no default SB */ + max_non_def_sbs += is_vf ? 1 : 0; + + /* Maximum number of RSS queues: one IGU SB goes to CNIC */ + rss_count = max_non_def_sbs - cnic_cnt; + + if (rss_count < 1) + return -EINVAL; + + /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ + rx_count = rss_count + cnic_cnt; + + /* Maximum number of netdev Tx queues: + * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 + */ + tx_count = rss_count * max_cos_est + cnic_cnt; + + /* dev zeroed in init_etherdev */ + dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count); + if (!dev) + return -ENOMEM; + + bp = netdev_priv(dev); + + bp->flags = 0; + if (is_vf) + bp->flags |= IS_VF_FLAG; + + bp->igu_sb_cnt = max_non_def_sbs; + bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM; + bp->msg_enable = debug; + bp->cnic_support = cnic_cnt; + bp->cnic_probe = bnx2x_cnic_probe; + + pci_set_drvdata(pdev, dev); + + rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data); + if (rc < 0) { + free_netdev(dev); + return rc; + } + + BNX2X_DEV_INFO("This is a %s function\n", + IS_PF(bp) ? "physical" : "virtual"); + BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off"); + BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs); + BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n", + tx_count, rx_count); + + rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + /* Map doorbells here as we need the real value of bp->max_cos which + * is initialized in bnx2x_init_bp() to determine the number of + * l2 connections. + */ + if (IS_VF(bp)) { + bp->doorbells = bnx2x_vf_doorbells(bp); + rc = bnx2x_vf_pci_alloc(bp); + if (rc) + goto init_one_freemem; + } else { + doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT); + if (doorbell_size > pci_resource_len(pdev, 2)) { + dev_err(&bp->pdev->dev, + "Cannot map doorbells, bar size too small, aborting\n"); + rc = -ENOMEM; + goto init_one_freemem; + } + bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), + doorbell_size); + } + if (!bp->doorbells) { + dev_err(&bp->pdev->dev, + "Cannot map doorbell space, aborting\n"); + rc = -ENOMEM; + goto init_one_freemem; + } + + if (IS_VF(bp)) { + rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count); + if (rc) + goto init_one_freemem; + +#ifdef CONFIG_BNX2X_SRIOV + /* VF with OLD Hypervisor or old PF do not support filtering */ + if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) { + dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; + dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; + } +#endif + } + + /* Enable SRIOV if capability found in configuration space */ + rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS); + if (rc) + goto init_one_freemem; + + /* calc qm_cid_count */ + bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); + BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); + + /* disable FCOE L2 queue for E1x*/ + if (CHIP_IS_E1x(bp)) + bp->flags |= NO_FCOE_FLAG; + + /* Set bp->num_queues for MSI-X mode*/ + bnx2x_set_num_queues(bp); + + /* Configure interrupt mode: try to enable MSI-X/MSI if + * needed. + */ + rc = bnx2x_set_int_mode(bp); + if (rc) { + dev_err(&pdev->dev, "Cannot set interrupts\n"); + goto init_one_freemem; + } + BNX2X_DEV_INFO("set interrupts successfully\n"); + + /* register the net device */ + rc = register_netdev(dev); + if (rc) { + dev_err(&pdev->dev, "Cannot register net device\n"); + goto init_one_freemem; + } + BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name); + + if (!NO_FCOE(bp)) { + /* Add storage MAC address */ + rtnl_lock(); + dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + BNX2X_DEV_INFO( + "%s (%c%d) PCI-E found at mem %lx, IRQ %d, node addr %pM\n", + board_info[ent->driver_data].name, + (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), + dev->base_addr, bp->pdev->irq, dev->dev_addr); + pcie_print_link_status(bp->pdev); + + bnx2x_register_phc(bp); + + if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) + bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED); + + return 0; + +init_one_freemem: + bnx2x_free_mem_bp(bp); + +init_one_exit: + bnx2x_disable_pcie_error_reporting(bp); + + if (bp->regview) + iounmap(bp->regview); + + if (IS_PF(bp) && bp->doorbells) + iounmap(bp->doorbells); + + free_netdev(dev); + + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + + pci_disable_device(pdev); + + return rc; +} + +static void __bnx2x_remove(struct pci_dev *pdev, + struct net_device *dev, + struct bnx2x *bp, + bool remove_netdev) +{ + if (bp->ptp_clock) { + ptp_clock_unregister(bp->ptp_clock); + bp->ptp_clock = NULL; + } + + /* Delete storage MAC address */ + if (!NO_FCOE(bp)) { + rtnl_lock(); + dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + +#ifdef BCM_DCBNL + /* Delete app tlvs from dcbnl */ + bnx2x_dcbnl_update_applist(bp, true); +#endif + + if (IS_PF(bp) && + !BP_NOMCP(bp) && + (bp->flags & BC_SUPPORTS_RMMOD_CMD)) + bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0); + + /* Close the interface - either directly or implicitly */ + if (remove_netdev) { + unregister_netdev(dev); + } else { + rtnl_lock(); + dev_close(dev); + rtnl_unlock(); + } + + bnx2x_iov_remove_one(bp); + + /* Power on: we can't let PCI layer write to us while we are in D3 */ + if (IS_PF(bp)) { + bnx2x_set_power_state(bp, PCI_D0); + bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED); + + /* Set endianity registers to reset values in case next driver + * boots in different endianty environment. + */ + bnx2x_reset_endianity(bp); + } + + /* Disable MSI/MSI-X */ + bnx2x_disable_msi(bp); + + /* Power off */ + if (IS_PF(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); + + /* Make sure RESET task is not scheduled before continuing */ + cancel_delayed_work_sync(&bp->sp_rtnl_task); + + /* send message via vfpf channel to release the resources of this vf */ + if (IS_VF(bp)) + bnx2x_vfpf_release(bp); + + /* Assumes no further PCIe PM changes will occur */ + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, bp->wol); + pci_set_power_state(pdev, PCI_D3hot); + } + + bnx2x_disable_pcie_error_reporting(bp); + if (remove_netdev) { + if (bp->regview) + iounmap(bp->regview); + + /* For vfs, doorbells are part of the regview and were unmapped + * along with it. FW is only loaded by PF. + */ + if (IS_PF(bp)) { + if (bp->doorbells) + iounmap(bp->doorbells); + + bnx2x_release_firmware(bp); + } else { + bnx2x_vf_pci_dealloc(bp); + } + bnx2x_free_mem_bp(bp); + + free_netdev(dev); + + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + + pci_disable_device(pdev); + } +} + +static void bnx2x_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return; + } + bp = netdev_priv(dev); + + __bnx2x_remove(pdev, dev, bp, true); +} + +static int bnx2x_eeh_nic_unload(struct bnx2x *bp) +{ + bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; + + bp->rx_mode = BNX2X_RX_MODE_NONE; + + if (CNIC_LOADED(bp)) + bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); + + /* Stop Tx */ + bnx2x_tx_disable(bp); + netdev_reset_tc(bp->dev); + + del_timer_sync(&bp->timer); + cancel_delayed_work_sync(&bp->sp_task); + cancel_delayed_work_sync(&bp->period_task); + + if (!down_timeout(&bp->stats_lock, HZ / 10)) { + bp->stats_state = STATS_STATE_DISABLED; + up(&bp->stats_lock); + } + + bnx2x_save_statistics(bp); + + netif_carrier_off(bp->dev); + + return 0; +} + +/** + * bnx2x_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + BNX2X_ERR("IO error detected\n"); + + netif_device_detach(dev); + + if (state == pci_channel_io_perm_failure) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + if (netif_running(dev)) + bnx2x_eeh_nic_unload(bp); + + bnx2x_prev_path_mark_eeh(bp); + + pci_disable_device(pdev); + + rtnl_unlock(); + + /* Request a slot reset */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * bnx2x_io_slot_reset - called after the PCI bus has been reset + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + int i; + + rtnl_lock(); + BNX2X_ERR("IO slot reset initializing...\n"); + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset\n"); + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + + if (netif_running(dev)) + bnx2x_set_power_state(bp, PCI_D0); + + if (netif_running(dev)) { + BNX2X_ERR("IO slot reset --> driver unload\n"); + + /* MCP should have been reset; Need to wait for validity */ + if (bnx2x_init_shmem(bp)) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { + u32 v; + + v = SHMEM2_RD(bp, + drv_capabilities_flag[BP_FW_MB_IDX(bp)]); + SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)], + v & ~DRV_FLAGS_CAPABILITIES_LOADED_L2); + } + bnx2x_drain_tx_queues(bp); + bnx2x_send_unload_req(bp, UNLOAD_RECOVERY); + bnx2x_netif_stop(bp, 1); + bnx2x_del_all_napi(bp); + + if (CNIC_LOADED(bp)) + bnx2x_del_all_napi_cnic(bp); + + bnx2x_free_irq(bp); + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp, true); + + bp->sp_state = 0; + bp->port.pmf = 0; + + bnx2x_prev_unload(bp); + + /* We should have reseted the engine, so It's fair to + * assume the FW will no longer write to the bnx2x driver. + */ + bnx2x_squeeze_objects(bp); + bnx2x_free_skbs(bp); + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + bnx2x_free_fp_mem(bp); + bnx2x_free_mem(bp); + + bp->state = BNX2X_STATE_CLOSED; + } + + rtnl_unlock(); + + /* If AER, perform cleanup of the PCIe registers */ + if (bp->flags & AER_ENABLED) { + if (pci_cleanup_aer_uncorrect_error_status(pdev)) + BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n"); + else + DP(NETIF_MSG_HW, "pci_cleanup_aer_uncorrect_error_status succeeded\n"); + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * bnx2x_io_resume - called when traffic can start flowing again + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bnx2x_io_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + netdev_err(bp->dev, "Handling parity error recovery. Try again later\n"); + return; + } + + rtnl_lock(); + + bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK; + + if (netif_running(dev)) + bnx2x_nic_load(bp, LOAD_NORMAL); + + netif_device_attach(dev); + + rtnl_unlock(); +} + +static const struct pci_error_handlers bnx2x_err_handler = { + .error_detected = bnx2x_io_error_detected, + .slot_reset = bnx2x_io_slot_reset, + .resume = bnx2x_io_resume, +}; + +static void bnx2x_shutdown(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) + return; + + bp = netdev_priv(dev); + if (!bp) + return; + + rtnl_lock(); + netif_device_detach(dev); + rtnl_unlock(); + + /* Don't remove the netdevice, as there are scenarios which will cause + * the kernel to hang, e.g., when trying to remove bnx2i while the + * rootfs is mounted from SAN. + */ + __bnx2x_remove(pdev, dev, bp, false); +} + +static struct pci_driver bnx2x_pci_driver = { + .name = DRV_MODULE_NAME, + .id_table = bnx2x_pci_tbl, + .probe = bnx2x_init_one, + .remove = bnx2x_remove_one, + .suspend = bnx2x_suspend, + .resume = bnx2x_resume, + .err_handler = &bnx2x_err_handler, +#ifdef CONFIG_BNX2X_SRIOV + .sriov_configure = bnx2x_sriov_configure, +#endif + .shutdown = bnx2x_shutdown, +}; + +static int __init bnx2x_init(void) +{ + int ret; + + pr_info("%s", version); + + bnx2x_wq = create_singlethread_workqueue("bnx2x"); + if (bnx2x_wq == NULL) { + pr_err("Cannot create workqueue\n"); + return -ENOMEM; + } + bnx2x_iov_wq = create_singlethread_workqueue("bnx2x_iov"); + if (!bnx2x_iov_wq) { + pr_err("Cannot create iov workqueue\n"); + destroy_workqueue(bnx2x_wq); + return -ENOMEM; + } + + ret = pci_register_driver(&bnx2x_pci_driver); + if (ret) { + pr_err("Cannot register driver\n"); + destroy_workqueue(bnx2x_wq); + destroy_workqueue(bnx2x_iov_wq); + } + return ret; +} + +static void __exit bnx2x_cleanup(void) +{ + struct list_head *pos, *q; + + pci_unregister_driver(&bnx2x_pci_driver); + + destroy_workqueue(bnx2x_wq); + destroy_workqueue(bnx2x_iov_wq); + + /* Free globally allocated resources */ + list_for_each_safe(pos, q, &bnx2x_prev_list) { + struct bnx2x_prev_path_list *tmp = + list_entry(pos, struct bnx2x_prev_path_list, list); + list_del(pos); + kfree(tmp); + } +} + +void bnx2x_notify_link_changed(struct bnx2x *bp) +{ + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1); +} + +module_init(bnx2x_init); +module_exit(bnx2x_cleanup); + +/** + * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s). + * + * @bp: driver handle + * @set: set or clear the CAM entry + * + * This function will wait until the ramrod completion returns. + * Return 0 if success, -ENODEV if ramrod doesn't return. + */ +static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp) +{ + unsigned long ramrod_flags = 0; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac, + &bp->iscsi_l2_mac_obj, true, + BNX2X_ISCSI_ETH_MAC, &ramrod_flags); +} + +/* count denotes the number of new completions we have seen */ +static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count) +{ + struct eth_spe *spe; + int cxt_index, cxt_offset; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return; +#endif + + spin_lock_bh(&bp->spq_lock); + BUG_ON(bp->cnic_spq_pending < count); + bp->cnic_spq_pending -= count; + + for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) { + u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type) + & SPE_HDR_CONN_TYPE) >> + SPE_HDR_CONN_TYPE_SHIFT; + u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data) + >> SPE_HDR_CMD_ID_SHIFT) & 0xff; + + /* Set validation for iSCSI L2 client before sending SETUP + * ramrod + */ + if (type == ETH_CONNECTION_TYPE) { + if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) { + cxt_index = BNX2X_ISCSI_ETH_CID(bp) / + ILT_PAGE_CIDS; + cxt_offset = BNX2X_ISCSI_ETH_CID(bp) - + (cxt_index * ILT_PAGE_CIDS); + bnx2x_set_ctx_validation(bp, + &bp->context[cxt_index]. + vcxt[cxt_offset].eth, + BNX2X_ISCSI_ETH_CID(bp)); + } + } + + /* + * There may be not more than 8 L2, not more than 8 L5 SPEs + * and in the air. We also check that number of outstanding + * COMMON ramrods is not more than the EQ and SPQ can + * accommodate. + */ + if (type == ETH_CONNECTION_TYPE) { + if (!atomic_read(&bp->cq_spq_left)) + break; + else + atomic_dec(&bp->cq_spq_left); + } else if (type == NONE_CONNECTION_TYPE) { + if (!atomic_read(&bp->eq_spq_left)) + break; + else + atomic_dec(&bp->eq_spq_left); + } else if ((type == ISCSI_CONNECTION_TYPE) || + (type == FCOE_CONNECTION_TYPE)) { + if (bp->cnic_spq_pending >= + bp->cnic_eth_dev.max_kwqe_pending) + break; + else + bp->cnic_spq_pending++; + } else { + BNX2X_ERR("Unknown SPE type: %d\n", type); + bnx2x_panic(); + break; + } + + spe = bnx2x_sp_get_next(bp); + *spe = *bp->cnic_kwq_cons; + + DP(BNX2X_MSG_SP, "pending on SPQ %d, on KWQ %d count %d\n", + bp->cnic_spq_pending, bp->cnic_kwq_pending, count); + + if (bp->cnic_kwq_cons == bp->cnic_kwq_last) + bp->cnic_kwq_cons = bp->cnic_kwq; + else + bp->cnic_kwq_cons++; + } + bnx2x_sp_prod_update(bp); + spin_unlock_bh(&bp->spq_lock); +} + +static int bnx2x_cnic_sp_queue(struct net_device *dev, + struct kwqe_16 *kwqes[], u32 count) +{ + struct bnx2x *bp = netdev_priv(dev); + int i; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + BNX2X_ERR("Can't post to SP queue while panic\n"); + return -EIO; + } +#endif + + if ((bp->recovery_state != BNX2X_RECOVERY_DONE) && + (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { + BNX2X_ERR("Handling parity error recovery. Try again later\n"); + return -EAGAIN; + } + + spin_lock_bh(&bp->spq_lock); + + for (i = 0; i < count; i++) { + struct eth_spe *spe = (struct eth_spe *)kwqes[i]; + + if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT) + break; + + *bp->cnic_kwq_prod = *spe; + + bp->cnic_kwq_pending++; + + DP(BNX2X_MSG_SP, "L5 SPQE %x %x %x:%x pos %d\n", + spe->hdr.conn_and_cmd_data, spe->hdr.type, + spe->data.update_data_addr.hi, + spe->data.update_data_addr.lo, + bp->cnic_kwq_pending); + + if (bp->cnic_kwq_prod == bp->cnic_kwq_last) + bp->cnic_kwq_prod = bp->cnic_kwq; + else + bp->cnic_kwq_prod++; + } + + spin_unlock_bh(&bp->spq_lock); + + if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending) + bnx2x_cnic_sp_post(bp, 0); + + return i; +} + +static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl) +{ + struct cnic_ops *c_ops; + int rc = 0; + + mutex_lock(&bp->cnic_mutex); + c_ops = rcu_dereference_protected(bp->cnic_ops, + lockdep_is_held(&bp->cnic_mutex)); + if (c_ops) + rc = c_ops->cnic_ctl(bp->cnic_data, ctl); + mutex_unlock(&bp->cnic_mutex); + + return rc; +} + +static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl) +{ + struct cnic_ops *c_ops; + int rc = 0; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + rc = c_ops->cnic_ctl(bp->cnic_data, ctl); + rcu_read_unlock(); + + return rc; +} + +/* + * for commands that have no data + */ +int bnx2x_cnic_notify(struct bnx2x *bp, int cmd) +{ + struct cnic_ctl_info ctl = {0}; + + ctl.cmd = cmd; + + return bnx2x_cnic_ctl_send(bp, &ctl); +} + +static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err) +{ + struct cnic_ctl_info ctl = {0}; + + /* first we tell CNIC and only then we count this as a completion */ + ctl.cmd = CNIC_CTL_COMPLETION_CMD; + ctl.data.comp.cid = cid; + ctl.data.comp.error = err; + + bnx2x_cnic_ctl_send_bh(bp, &ctl); + bnx2x_cnic_sp_post(bp, 0); +} + +/* Called with netif_addr_lock_bh() taken. + * Sets an rx_mode config for an iSCSI ETH client. + * Doesn't block. + * Completion should be checked outside. + */ +static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start) +{ + unsigned long accept_flags = 0, ramrod_flags = 0; + u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); + int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED; + + if (start) { + /* Start accepting on iSCSI L2 ring. Accept all multicasts + * because it's the only way for UIO Queue to accept + * multicasts (in non-promiscuous mode only one Queue per + * function will receive multicast packets (leading in our + * case). + */ + __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + + /* Clear STOP_PENDING bit if START is requested */ + clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state); + + sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED; + } else + /* Clear START_PENDING bit if STOP is requested */ + clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state); + + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) + set_bit(sched_state, &bp->sp_state); + else { + __set_bit(RAMROD_RX, &ramrod_flags); + bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0, + ramrod_flags); + } +} + +static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc = 0; + + switch (ctl->cmd) { + case DRV_CTL_CTXTBL_WR_CMD: { + u32 index = ctl->data.io.offset; + dma_addr_t addr = ctl->data.io.dma_addr; + + bnx2x_ilt_wr(bp, index, addr); + break; + } + + case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: { + int count = ctl->data.credit.credit_count; + + bnx2x_cnic_sp_post(bp, count); + break; + } + + /* rtnl_lock is held. */ + case DRV_CTL_START_L2_CMD: { + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + unsigned long sp_bits = 0; + + /* Configure the iSCSI classification object */ + bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj, + cp->iscsi_l2_client_id, + cp->iscsi_l2_cid, BP_FUNC(bp), + bnx2x_sp(bp, mac_rdata), + bnx2x_sp_mapping(bp, mac_rdata), + BNX2X_FILTER_MAC_PENDING, + &bp->sp_state, BNX2X_OBJ_TYPE_RX, + &bp->macs_pool); + + /* Set iSCSI MAC address */ + rc = bnx2x_set_iscsi_eth_mac_addr(bp); + if (rc) + break; + + mmiowb(); + barrier(); + + /* Start accepting on iSCSI L2 ring */ + + netif_addr_lock_bh(dev); + bnx2x_set_iscsi_eth_rx_mode(bp, true); + netif_addr_unlock_bh(dev); + + /* bits to wait on */ + __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); + __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits); + + if (!bnx2x_wait_sp_comp(bp, sp_bits)) + BNX2X_ERR("rx_mode completion timed out!\n"); + + break; + } + + /* rtnl_lock is held. */ + case DRV_CTL_STOP_L2_CMD: { + unsigned long sp_bits = 0; + + /* Stop accepting on iSCSI L2 ring */ + netif_addr_lock_bh(dev); + bnx2x_set_iscsi_eth_rx_mode(bp, false); + netif_addr_unlock_bh(dev); + + /* bits to wait on */ + __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); + __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits); + + if (!bnx2x_wait_sp_comp(bp, sp_bits)) + BNX2X_ERR("rx_mode completion timed out!\n"); + + mmiowb(); + barrier(); + + /* Unset iSCSI L2 MAC */ + rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj, + BNX2X_ISCSI_ETH_MAC, true); + break; + } + case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: { + int count = ctl->data.credit.credit_count; + + smp_mb__before_atomic(); + atomic_add(count, &bp->cq_spq_left); + smp_mb__after_atomic(); + break; + } + case DRV_CTL_ULP_REGISTER_CMD: { + int ulp_type = ctl->data.register_data.ulp_type; + + if (CHIP_IS_E3(bp)) { + int idx = BP_FW_MB_IDX(bp); + u32 cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); + int path = BP_PATH(bp); + int port = BP_PORT(bp); + int i; + u32 scratch_offset; + u32 *host_addr; + + /* first write capability to shmem2 */ + if (ulp_type == CNIC_ULP_ISCSI) + cap |= DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; + else if (ulp_type == CNIC_ULP_FCOE) + cap |= DRV_FLAGS_CAPABILITIES_LOADED_FCOE; + SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); + + if ((ulp_type != CNIC_ULP_FCOE) || + (!SHMEM2_HAS(bp, ncsi_oem_data_addr)) || + (!(bp->flags & BC_SUPPORTS_FCOE_FEATURES))) + break; + + /* if reached here - should write fcoe capabilities */ + scratch_offset = SHMEM2_RD(bp, ncsi_oem_data_addr); + if (!scratch_offset) + break; + scratch_offset += offsetof(struct glob_ncsi_oem_data, + fcoe_features[path][port]); + host_addr = (u32 *) &(ctl->data.register_data. + fcoe_features); + for (i = 0; i < sizeof(struct fcoe_capabilities); + i += 4) + REG_WR(bp, scratch_offset + i, + *(host_addr + i/4)); + } + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + break; + } + + case DRV_CTL_ULP_UNREGISTER_CMD: { + int ulp_type = ctl->data.ulp_type; + + if (CHIP_IS_E3(bp)) { + int idx = BP_FW_MB_IDX(bp); + u32 cap; + + cap = SHMEM2_RD(bp, drv_capabilities_flag[idx]); + if (ulp_type == CNIC_ULP_ISCSI) + cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_ISCSI; + else if (ulp_type == CNIC_ULP_FCOE) + cap &= ~DRV_FLAGS_CAPABILITIES_LOADED_FCOE; + SHMEM2_WR(bp, drv_capabilities_flag[idx], cap); + } + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + break; + } + + default: + BNX2X_ERR("unknown command %x\n", ctl->cmd); + rc = -EINVAL; + } + + /* For storage-only interfaces, change driver state */ + if (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)) { + switch (ctl->drv_state) { + case DRV_NOP: + break; + case DRV_ACTIVE: + bnx2x_set_os_driver_state(bp, + OS_DRIVER_STATE_ACTIVE); + break; + case DRV_INACTIVE: + bnx2x_set_os_driver_state(bp, + OS_DRIVER_STATE_DISABLED); + break; + case DRV_UNLOADED: + bnx2x_set_os_driver_state(bp, + OS_DRIVER_STATE_NOT_LOADED); + break; + default: + BNX2X_ERR("Unknown cnic driver state: %d\n", ctl->drv_state); + } + } + + return rc; +} + +static int bnx2x_get_fc_npiv(struct net_device *dev, + struct cnic_fc_npiv_tbl *cnic_tbl) +{ + struct bnx2x *bp = netdev_priv(dev); + struct bdn_fc_npiv_tbl *tbl = NULL; + u32 offset, entries; + int rc = -EINVAL; + int i; + + if (!SHMEM2_HAS(bp, fc_npiv_nvram_tbl_addr[0])) + goto out; + + DP(BNX2X_MSG_MCP, "About to read the FC-NPIV table\n"); + + tbl = kmalloc(sizeof(*tbl), GFP_KERNEL); + if (!tbl) { + BNX2X_ERR("Failed to allocate fc_npiv table\n"); + goto out; + } + + offset = SHMEM2_RD(bp, fc_npiv_nvram_tbl_addr[BP_PORT(bp)]); + if (!offset) { + DP(BNX2X_MSG_MCP, "No FC-NPIV in NVRAM\n"); + goto out; + } + DP(BNX2X_MSG_MCP, "Offset of FC-NPIV in NVRAM: %08x\n", offset); + + /* Read the table contents from nvram */ + if (bnx2x_nvram_read(bp, offset, (u8 *)tbl, sizeof(*tbl))) { + BNX2X_ERR("Failed to read FC-NPIV table\n"); + goto out; + } + + /* Since bnx2x_nvram_read() returns data in be32, we need to convert + * the number of entries back to cpu endianness. + */ + entries = tbl->fc_npiv_cfg.num_of_npiv; + entries = (__force u32)be32_to_cpu((__force __be32)entries); + tbl->fc_npiv_cfg.num_of_npiv = entries; + + if (!tbl->fc_npiv_cfg.num_of_npiv) { + DP(BNX2X_MSG_MCP, + "No FC-NPIV table [valid, simply not present]\n"); + goto out; + } else if (tbl->fc_npiv_cfg.num_of_npiv > MAX_NUMBER_NPIV) { + BNX2X_ERR("FC-NPIV table with bad length 0x%08x\n", + tbl->fc_npiv_cfg.num_of_npiv); + goto out; + } else { + DP(BNX2X_MSG_MCP, "Read 0x%08x entries from NVRAM\n", + tbl->fc_npiv_cfg.num_of_npiv); + } + + /* Copy the data into cnic-provided struct */ + cnic_tbl->count = tbl->fc_npiv_cfg.num_of_npiv; + for (i = 0; i < cnic_tbl->count; i++) { + memcpy(cnic_tbl->wwpn[i], tbl->settings[i].npiv_wwpn, 8); + memcpy(cnic_tbl->wwnn[i], tbl->settings[i].npiv_wwnn, 8); + } + + rc = 0; +out: + kfree(tbl); + return rc; +} + +void bnx2x_setup_cnic_irq_info(struct bnx2x *bp) +{ + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + if (bp->flags & USING_MSIX_FLAG) { + cp->drv_state |= CNIC_DRV_STATE_USING_MSIX; + cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX; + cp->irq_arr[0].vector = bp->msix_table[1].vector; + } else { + cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX; + cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX; + } + if (!CHIP_IS_E1x(bp)) + cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb; + else + cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb; + + cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp); + cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp); + cp->irq_arr[1].status_blk = bp->def_status_blk; + cp->irq_arr[1].status_blk_num = DEF_SB_ID; + cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID; + + cp->num_irq = 2; +} + +void bnx2x_setup_cnic_info(struct bnx2x *bp) +{ + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + + bnx2x_cid_ilt_lines(bp); + cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; + cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); + cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); + + DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n", + BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid, + cp->iscsi_l2_cid); + + if (NO_ISCSI_OOO(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; +} + +static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops, + void *data) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + int rc; + + DP(NETIF_MSG_IFUP, "Register_cnic called\n"); + + if (ops == NULL) { + BNX2X_ERR("NULL ops received\n"); + return -EINVAL; + } + + if (!CNIC_SUPPORT(bp)) { + BNX2X_ERR("Can't register CNIC when not supported\n"); + return -EOPNOTSUPP; + } + + if (!CNIC_LOADED(bp)) { + rc = bnx2x_load_cnic(bp); + if (rc) { + BNX2X_ERR("CNIC-related load failed\n"); + return rc; + } + } + + bp->cnic_enabled = true; + + bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!bp->cnic_kwq) + return -ENOMEM; + + bp->cnic_kwq_cons = bp->cnic_kwq; + bp->cnic_kwq_prod = bp->cnic_kwq; + bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT; + + bp->cnic_spq_pending = 0; + bp->cnic_kwq_pending = 0; + + bp->cnic_data = data; + + cp->num_irq = 0; + cp->drv_state |= CNIC_DRV_STATE_REGD; + cp->iro_arr = bp->iro_arr; + + bnx2x_setup_cnic_irq_info(bp); + + rcu_assign_pointer(bp->cnic_ops, ops); + + /* Schedule driver to read CNIC driver versions */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_GET_DRV_VERSION, 0); + + return 0; +} + +static int bnx2x_unregister_cnic(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + mutex_lock(&bp->cnic_mutex); + cp->drv_state = 0; + RCU_INIT_POINTER(bp->cnic_ops, NULL); + mutex_unlock(&bp->cnic_mutex); + synchronize_rcu(); + bp->cnic_enabled = false; + kfree(bp->cnic_kwq); + bp->cnic_kwq = NULL; + + return 0; +} + +static struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + /* If both iSCSI and FCoE are disabled - return NULL in + * order to indicate CNIC that it should not try to work + * with this device. + */ + if (NO_ISCSI(bp) && NO_FCOE(bp)) + return NULL; + + cp->drv_owner = THIS_MODULE; + cp->chip_id = CHIP_ID(bp); + cp->pdev = bp->pdev; + cp->io_base = bp->regview; + cp->io_base2 = bp->doorbells; + cp->max_kwqe_pending = 8; + cp->ctx_blk_size = CDU_ILT_PAGE_SZ; + cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + + bnx2x_cid_ilt_lines(bp); + cp->ctx_tbl_len = CNIC_ILT_LINES; + cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; + cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue; + cp->drv_ctl = bnx2x_drv_ctl; + cp->drv_get_fc_npiv_tbl = bnx2x_get_fc_npiv; + cp->drv_register_cnic = bnx2x_register_cnic; + cp->drv_unregister_cnic = bnx2x_unregister_cnic; + cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp); + cp->iscsi_l2_client_id = + bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); + cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp); + + if (NO_ISCSI_OOO(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; + + if (NO_ISCSI(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI; + + if (NO_FCOE(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_FCOE; + + BNX2X_DEV_INFO( + "page_size %d, tbl_offset %d, tbl_lines %d, starting cid %d\n", + cp->ctx_blk_size, + cp->ctx_tbl_offset, + cp->ctx_tbl_len, + cp->starting_cid); + return cp; +} + +static u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp) +{ + struct bnx2x *bp = fp->bp; + u32 offset = BAR_USTRORM_INTMEM; + + if (IS_VF(bp)) + return bnx2x_vf_ustorm_prods_offset(bp, fp); + else if (!CHIP_IS_E1x(bp)) + offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id); + else + offset += USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id); + + return offset; +} + +/* called only on E1H or E2. + * When pretending to be PF, the pretend value is the function number 0...7 + * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID + * combination + */ +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val) +{ + u32 pretend_reg; + + if (CHIP_IS_E1H(bp) && pretend_func_val >= E1H_FUNC_MAX) + return -1; + + /* get my own pretend register */ + pretend_reg = bnx2x_get_pretend_reg(bp); + REG_WR(bp, pretend_reg, pretend_func_val); + REG_RD(bp, pretend_reg); + return 0; +} + +static void bnx2x_ptp_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, ptp_task); + int port = BP_PORT(bp); + u32 val_seq; + u64 timestamp, ns; + struct skb_shared_hwtstamps shhwtstamps; + bool bail = true; + int i; + + /* FW may take a while to complete timestamping; try a bit and if it's + * still not complete, may indicate an error state - bail out then. + */ + for (i = 0; i < 10; i++) { + /* Read Tx timestamp registers */ + val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID); + if (val_seq & 0x10000) { + bail = false; + break; + } + msleep(1 << i); + } + + if (!bail) { + /* There is a valid timestamp value */ + timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB : + NIG_REG_P0_TLLH_PTP_BUF_TS_MSB); + timestamp <<= 32; + timestamp |= REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_LSB : + NIG_REG_P0_TLLH_PTP_BUF_TS_LSB); + /* Reset timestamp register to allow new timestamp */ + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); + ns = timecounter_cyc2time(&bp->timecounter, timestamp); + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps); + + DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n", + timestamp, ns); + } else { + DP(BNX2X_MSG_PTP, + "Tx timestamp is not recorded (register read=%u)\n", + val_seq); + bp->eth_stats.ptp_skip_tx_ts++; + } + + dev_kfree_skb_any(bp->ptp_tx_skb); + bp->ptp_tx_skb = NULL; +} + +void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb) +{ + int port = BP_PORT(bp); + u64 timestamp, ns; + + timestamp = REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB : + NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB); + timestamp <<= 32; + timestamp |= REG_RD(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB : + NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB); + + /* Reset timestamp register to allow new timestamp */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : + NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); + + ns = timecounter_cyc2time(&bp->timecounter, timestamp); + + skb_hwtstamps(skb)->hwtstamp = ns_to_ktime(ns); + + DP(BNX2X_MSG_PTP, "Rx timestamp, timestamp cycles = %llu, ns = %llu\n", + timestamp, ns); +} + +/* Read the PHC */ +static u64 bnx2x_cyclecounter_read(const struct cyclecounter *cc) +{ + struct bnx2x *bp = container_of(cc, struct bnx2x, cyclecounter); + int port = BP_PORT(bp); + u32 wb_data[2]; + u64 phc_cycles; + + REG_RD_DMAE(bp, port ? NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t1 : + NIG_REG_TIMESYNC_GEN_REG + tsgen_synctime_t0, wb_data, 2); + phc_cycles = wb_data[1]; + phc_cycles = (phc_cycles << 32) + wb_data[0]; + + DP(BNX2X_MSG_PTP, "PHC read cycles = %llu\n", phc_cycles); + + return phc_cycles; +} + +static void bnx2x_init_cyclecounter(struct bnx2x *bp) +{ + memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter)); + bp->cyclecounter.read = bnx2x_cyclecounter_read; + bp->cyclecounter.mask = CYCLECOUNTER_MASK(64); + bp->cyclecounter.shift = 0; + bp->cyclecounter.mult = 1; +} + +static int bnx2x_send_reset_timesync_ramrod(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {NULL}; + struct bnx2x_func_set_timesync_params *set_timesync_params = + &func_params.params.set_timesync; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_SET_TIMESYNC; + + /* Function parameters */ + set_timesync_params->drift_adjust_cmd = TS_DRIFT_ADJUST_RESET; + set_timesync_params->offset_cmd = TS_OFFSET_KEEP; + + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_enable_ptp_packets(struct bnx2x *bp) +{ + struct bnx2x_queue_state_params q_params; + int rc, i; + + /* send queue update ramrod to enable PTP packets */ + memset(&q_params, 0, sizeof(q_params)); + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + q_params.cmd = BNX2X_Q_CMD_UPDATE; + __set_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, + &q_params.params.update.update_flags); + __set_bit(BNX2X_Q_UPDATE_PTP_PKTS, + &q_params.params.update.update_flags); + + /* send the ramrod on all the queues of the PF */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + /* Set the appropriate Queue object */ + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + /* Update the Queue state */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to enable PTP packets\n"); + return rc; + } + } + + return 0; +} + +int bnx2x_configure_ptp_filters(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int rc; + + if (!bp->hwtstamp_ioctl_called) + return 0; + + switch (bp->tx_type) { + case HWTSTAMP_TX_ON: + bp->flags |= TX_TIMESTAMPING_EN; + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x6AA); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3EEE); + break; + case HWTSTAMP_TX_ONESTEP_SYNC: + BNX2X_ERR("One-step timestamping is not supported\n"); + return -ERANGE; + } + + switch (bp->rx_filter) { + case HWTSTAMP_FILTER_NONE: + break; + case HWTSTAMP_FILTER_ALL: + case HWTSTAMP_FILTER_SOME: + case HWTSTAMP_FILTER_NTP_ALL: + bp->rx_filter = HWTSTAMP_FILTER_NONE; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + /* Initialize PTP detection for UDP/IPv4 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EE); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFE); + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; + /* Initialize PTP detection for UDP/IPv4 or UDP/IPv6 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7EA); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FEE); + break; + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + /* Initialize PTP detection L2 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6BF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EFF); + + break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + bp->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + /* Initialize PTP detection L2, UDP/IPv4 or UDP/IPv6 events */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x6AA); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3EEE); + break; + } + + /* Indicate to FW that this PF expects recorded PTP packets */ + rc = bnx2x_enable_ptp_packets(bp); + if (rc) + return rc; + + /* Enable sending PTP packets to host */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x1); + + return 0; +} + +static int bnx2x_hwtstamp_ioctl(struct bnx2x *bp, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int rc; + + DP(BNX2X_MSG_PTP, "HWTSTAMP IOCTL called\n"); + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + DP(BNX2X_MSG_PTP, "Requested tx_type: %d, requested rx_filters = %d\n", + config.tx_type, config.rx_filter); + + if (config.flags) { + BNX2X_ERR("config.flags is reserved for future use\n"); + return -EINVAL; + } + + bp->hwtstamp_ioctl_called = 1; + bp->tx_type = config.tx_type; + bp->rx_filter = config.rx_filter; + + rc = bnx2x_configure_ptp_filters(bp); + if (rc) + return rc; + + config.rx_filter = bp->rx_filter; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +/* Configures HW for PTP */ +static int bnx2x_configure_ptp(struct bnx2x *bp) +{ + int rc, port = BP_PORT(bp); + u32 wb_data[2]; + + /* Reset PTP event detection rules - will be configured in the IOCTL */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_PARAM_MASK : + NIG_REG_P0_LLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_RULE_MASK : + NIG_REG_P0_LLH_PTP_RULE_MASK, 0x3FFF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_PARAM_MASK : + NIG_REG_P0_TLLH_PTP_PARAM_MASK, 0x7FF); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_RULE_MASK : + NIG_REG_P0_TLLH_PTP_RULE_MASK, 0x3FFF); + + /* Disable PTP packets to host - will be configured in the IOCTL*/ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_TO_HOST : + NIG_REG_P0_LLH_PTP_TO_HOST, 0x0); + + /* Enable the PTP feature */ + REG_WR(bp, port ? NIG_REG_P1_PTP_EN : + NIG_REG_P0_PTP_EN, 0x3F); + + /* Enable the free-running counter */ + wb_data[0] = 0; + wb_data[1] = 0; + REG_WR_DMAE(bp, NIG_REG_TIMESYNC_GEN_REG + tsgen_ctrl, wb_data, 2); + + /* Reset drift register (offset register is not reset) */ + rc = bnx2x_send_reset_timesync_ramrod(bp); + if (rc) { + BNX2X_ERR("Failed to reset PHC drift register\n"); + return -EFAULT; + } + + /* Reset possibly old timestamps */ + REG_WR(bp, port ? NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID : + NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID, 0x10000); + REG_WR(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID : + NIG_REG_P0_TLLH_PTP_BUF_SEQID, 0x10000); + + return 0; +} + +/* Called during load, to initialize PTP-related stuff */ +void bnx2x_init_ptp(struct bnx2x *bp) +{ + int rc; + + /* Configure PTP in HW */ + rc = bnx2x_configure_ptp(bp); + if (rc) { + BNX2X_ERR("Stopping PTP initialization\n"); + return; + } + + /* Init work queue for Tx timestamping */ + INIT_WORK(&bp->ptp_task, bnx2x_ptp_task); + + /* Init cyclecounter and timecounter. This is done only in the first + * load. If done in every load, PTP application will fail when doing + * unload / load (e.g. MTU change) while it is running. + */ + if (!bp->timecounter_init_done) { + bnx2x_init_cyclecounter(bp); + timecounter_init(&bp->timecounter, &bp->cyclecounter, + ktime_to_ns(ktime_get_real())); + bp->timecounter_init_done = 1; + } + + DP(BNX2X_MSG_PTP, "PTP initialization ended successfully\n"); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h new file mode 100644 index 000000000..a91ccbf36 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h @@ -0,0 +1,170 @@ +/* bnx2x_mfw_req.h: Qlogic Everest network driver. + * + * Copyright (c) 2012-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef BNX2X_MFW_REQ_H +#define BNX2X_MFW_REQ_H + +#define PORT_0 0 +#define PORT_1 1 +#define PORT_MAX 2 +#define NVM_PATH_MAX 2 + +/* FCoE capabilities required from the driver */ +struct fcoe_capabilities { + u32 capability1; + /* Maximum number of I/Os per connection */ + #define FCOE_IOS_PER_CONNECTION_MASK 0x0000ffff + #define FCOE_IOS_PER_CONNECTION_SHIFT 0 + /* Maximum number of Logins per port */ + #define FCOE_LOGINS_PER_PORT_MASK 0xffff0000 + #define FCOE_LOGINS_PER_PORT_SHIFT 16 + + u32 capability2; + /* Maximum number of exchanges */ + #define FCOE_NUMBER_OF_EXCHANGES_MASK 0x0000ffff + #define FCOE_NUMBER_OF_EXCHANGES_SHIFT 0 + /* Maximum NPIV WWN per port */ + #define FCOE_NPIV_WWN_PER_PORT_MASK 0xffff0000 + #define FCOE_NPIV_WWN_PER_PORT_SHIFT 16 + + u32 capability3; + /* Maximum number of targets supported */ + #define FCOE_TARGETS_SUPPORTED_MASK 0x0000ffff + #define FCOE_TARGETS_SUPPORTED_SHIFT 0 + /* Maximum number of outstanding commands across all connections */ + #define FCOE_OUTSTANDING_COMMANDS_MASK 0xffff0000 + #define FCOE_OUTSTANDING_COMMANDS_SHIFT 16 + + u32 capability4; + #define FCOE_CAPABILITY4_STATEFUL 0x00000001 + #define FCOE_CAPABILITY4_STATELESS 0x00000002 + #define FCOE_CAPABILITY4_CAPABILITIES_REPORTED_VALID 0x00000004 +}; + +struct glob_ncsi_oem_data { + u32 driver_version; + u32 unused[3]; + struct fcoe_capabilities fcoe_features[NVM_PATH_MAX][PORT_MAX]; +}; + +/* current drv_info version */ +#define DRV_INFO_CUR_VER 2 + +/* drv_info op codes supported */ +enum drv_info_opcode { + ETH_STATS_OPCODE, + FCOE_STATS_OPCODE, + ISCSI_STATS_OPCODE +}; + +#define ETH_STAT_INFO_VERSION_LEN 12 +/* Per PCI Function Ethernet Statistics required from the driver */ +struct eth_stats_info { + /* Function's Driver Version. padded to 12 */ + u8 version[ETH_STAT_INFO_VERSION_LEN]; + /* Locally Admin Addr. BigEndian EIU48. Actual size is 6 bytes */ + u8 mac_local[8]; + u8 mac_add1[8]; /* Additional Programmed MAC Addr 1. */ + u8 mac_add2[8]; /* Additional Programmed MAC Addr 2. */ + u32 mtu_size; /* MTU Size. Note : Negotiated MTU */ + u32 feature_flags; /* Feature_Flags. */ +#define FEATURE_ETH_CHKSUM_OFFLOAD_MASK 0x01 +#define FEATURE_ETH_LSO_MASK 0x02 +#define FEATURE_ETH_BOOTMODE_MASK 0x1C +#define FEATURE_ETH_BOOTMODE_SHIFT 2 +#define FEATURE_ETH_BOOTMODE_NONE (0x0 << 2) +#define FEATURE_ETH_BOOTMODE_PXE (0x1 << 2) +#define FEATURE_ETH_BOOTMODE_ISCSI (0x2 << 2) +#define FEATURE_ETH_BOOTMODE_FCOE (0x3 << 2) +#define FEATURE_ETH_TOE_MASK 0x20 + u32 lso_max_size; /* LSO MaxOffloadSize. */ + u32 lso_min_seg_cnt; /* LSO MinSegmentCount. */ + /* Num Offloaded Connections TCP_IPv4. */ + u32 ipv4_ofld_cnt; + /* Num Offloaded Connections TCP_IPv6. */ + u32 ipv6_ofld_cnt; + u32 promiscuous_mode; /* Promiscuous Mode. non-zero true */ + u32 txq_size; /* TX Descriptors Queue Size */ + u32 rxq_size; /* RX Descriptors Queue Size */ + /* TX Descriptor Queue Avg Depth. % Avg Queue Depth since last poll */ + u32 txq_avg_depth; + /* RX Descriptors Queue Avg Depth. % Avg Queue Depth since last poll */ + u32 rxq_avg_depth; + /* IOV_Offload. 0=none; 1=MultiQueue, 2=VEB 3= VEPA*/ + u32 iov_offload; + /* Number of NetQueue/VMQ Config'd. */ + u32 netq_cnt; + u32 vf_cnt; /* Num VF assigned to this PF. */ +}; + +/* Per PCI Function FCOE Statistics required from the driver */ +struct fcoe_stats_info { + u8 version[12]; /* Function's Driver Version. */ + u8 mac_local[8]; /* Locally Admin Addr. */ + u8 mac_add1[8]; /* Additional Programmed MAC Addr 1. */ + u8 mac_add2[8]; /* Additional Programmed MAC Addr 2. */ + /* QoS Priority (per 802.1p). 0-7255 */ + u32 qos_priority; + u32 txq_size; /* FCoE TX Descriptors Queue Size. */ + u32 rxq_size; /* FCoE RX Descriptors Queue Size. */ + /* FCoE TX Descriptor Queue Avg Depth. */ + u32 txq_avg_depth; + /* FCoE RX Descriptors Queue Avg Depth. */ + u32 rxq_avg_depth; + u32 rx_frames_lo; /* FCoE RX Frames received. */ + u32 rx_frames_hi; /* FCoE RX Frames received. */ + u32 rx_bytes_lo; /* FCoE RX Bytes received. */ + u32 rx_bytes_hi; /* FCoE RX Bytes received. */ + u32 tx_frames_lo; /* FCoE TX Frames sent. */ + u32 tx_frames_hi; /* FCoE TX Frames sent. */ + u32 tx_bytes_lo; /* FCoE TX Bytes sent. */ + u32 tx_bytes_hi; /* FCoE TX Bytes sent. */ +}; + +/* Per PCI Function iSCSI Statistics required from the driver*/ +struct iscsi_stats_info { + u8 version[12]; /* Function's Driver Version. */ + u8 mac_local[8]; /* Locally Admin iSCSI MAC Addr. */ + u8 mac_add1[8]; /* Additional Programmed MAC Addr 1. */ + /* QoS Priority (per 802.1p). 0-7255 */ + u32 qos_priority; + u8 initiator_name[64]; /* iSCSI Boot Initiator Node name. */ + u8 ww_port_name[64]; /* iSCSI World wide port name */ + u8 boot_target_name[64];/* iSCSI Boot Target Name. */ + u8 boot_target_ip[16]; /* iSCSI Boot Target IP. */ + u32 boot_target_portal; /* iSCSI Boot Target Portal. */ + u8 boot_init_ip[16]; /* iSCSI Boot Initiator IP Address. */ + u32 max_frame_size; /* Max Frame Size. bytes */ + u32 txq_size; /* PDU TX Descriptors Queue Size. */ + u32 rxq_size; /* PDU RX Descriptors Queue Size. */ + u32 txq_avg_depth; /* PDU TX Descriptor Queue Avg Depth. */ + u32 rxq_avg_depth; /* PDU RX Descriptors Queue Avg Depth. */ + u32 rx_pdus_lo; /* iSCSI PDUs received. */ + u32 rx_pdus_hi; /* iSCSI PDUs received. */ + u32 rx_bytes_lo; /* iSCSI RX Bytes received. */ + u32 rx_bytes_hi; /* iSCSI RX Bytes received. */ + u32 tx_pdus_lo; /* iSCSI PDUs sent. */ + u32 tx_pdus_hi; /* iSCSI PDUs sent. */ + u32 tx_bytes_lo; /* iSCSI PDU TX Bytes sent. */ + u32 tx_bytes_hi; /* iSCSI PDU TX Bytes sent. */ + u32 pcp_prior_map_tbl; /* C-PCP to S-PCP Priority MapTable. + * 9 nibbles, the position of each nibble + * represents the C-PCP value, the value + * of the nibble = S-PCP value. + */ +}; + +union drv_info_to_mcp { + struct eth_stats_info ether_stat; + struct fcoe_stats_info fcoe_stat; + struct iscsi_stats_info iscsi_stat; +}; +#endif /* BNX2X_MFW_REQ_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h new file mode 100644 index 000000000..a43dea259 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -0,0 +1,7702 @@ +/* bnx2x_reg.h: Qlogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * The registers description starts with the register Access type followed + * by size in bits. For example [RW 32]. The access types are: + * R - Read only + * RC - Clear on read + * RW - Read/Write + * ST - Statistics register (clear on read) + * W - Write only + * WB - Wide bus register - the size is over 32 bits and it should be + * read/write in consecutive 32 bits accesses + * WR - Write Clear (write 1 to clear the bit) + * + */ +#ifndef BNX2X_REG_H +#define BNX2X_REG_H + +#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2) +#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1<<5) +#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1<<3) +#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1<<4) +#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1) +/* [RW 1] Initiate the ATC array - reset all the valid bits */ +#define ATC_REG_ATC_INIT_ARRAY 0x1100b8 +/* [R 1] ATC initialization done */ +#define ATC_REG_ATC_INIT_DONE 0x1100bc +/* [RC 6] Interrupt register #0 read clear */ +#define ATC_REG_ATC_INT_STS_CLR 0x1101c0 +/* [RW 5] Parity mask register #0 read/write */ +#define ATC_REG_ATC_PRTY_MASK 0x1101d8 +/* [R 5] Parity register #0 read */ +#define ATC_REG_ATC_PRTY_STS 0x1101cc +/* [RC 5] Parity register #0 read clear */ +#define ATC_REG_ATC_PRTY_STS_CLR 0x1101d0 +/* [RW 19] Interrupt mask register #0 read/write */ +#define BRB1_REG_BRB1_INT_MASK 0x60128 +/* [R 19] Interrupt register #0 read */ +#define BRB1_REG_BRB1_INT_STS 0x6011c +/* [RW 4] Parity mask register #0 read/write */ +#define BRB1_REG_BRB1_PRTY_MASK 0x60138 +/* [R 4] Parity register #0 read */ +#define BRB1_REG_BRB1_PRTY_STS 0x6012c +/* [RC 4] Parity register #0 read clear */ +#define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130 +/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At + * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address + * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning - + * following reset the first rbc access to this reg must be write; there can + * be no more rbc writes after the first one; there can be any number of rbc + * read following the first write; rbc access not following these rules will + * result in hang condition. */ +#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200 +/* [RW 10] The number of free blocks below which the full signal to class 0 + * is asserted */ +#define BRB1_REG_FULL_0_XOFF_THRESHOLD_0 0x601d0 +#define BRB1_REG_FULL_0_XOFF_THRESHOLD_1 0x60230 +/* [RW 11] The number of free blocks above which the full signal to class 0 + * is de-asserted */ +#define BRB1_REG_FULL_0_XON_THRESHOLD_0 0x601d4 +#define BRB1_REG_FULL_0_XON_THRESHOLD_1 0x60234 +/* [RW 11] The number of free blocks below which the full signal to class 1 + * is asserted */ +#define BRB1_REG_FULL_1_XOFF_THRESHOLD_0 0x601d8 +#define BRB1_REG_FULL_1_XOFF_THRESHOLD_1 0x60238 +/* [RW 11] The number of free blocks above which the full signal to class 1 + * is de-asserted */ +#define BRB1_REG_FULL_1_XON_THRESHOLD_0 0x601dc +#define BRB1_REG_FULL_1_XON_THRESHOLD_1 0x6023c +/* [RW 11] The number of free blocks below which the full signal to the LB + * port is asserted */ +#define BRB1_REG_FULL_LB_XOFF_THRESHOLD 0x601e0 +/* [RW 10] The number of free blocks above which the full signal to the LB + * port is de-asserted */ +#define BRB1_REG_FULL_LB_XON_THRESHOLD 0x601e4 +/* [RW 10] The number of free blocks above which the High_llfc signal to + interface #n is de-asserted. */ +#define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c +/* [RW 10] The number of free blocks below which the High_llfc signal to + interface #n is asserted. */ +#define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c +/* [RW 11] The number of blocks guarantied for the LB port */ +#define BRB1_REG_LB_GUARANTIED 0x601ec +/* [RW 11] The hysteresis on the guarantied buffer space for the Lb port + * before signaling XON. */ +#define BRB1_REG_LB_GUARANTIED_HYST 0x60264 +/* [RW 24] LL RAM data. */ +#define BRB1_REG_LL_RAM 0x61000 +/* [RW 10] The number of free blocks above which the Low_llfc signal to + interface #n is de-asserted. */ +#define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c +/* [RW 10] The number of free blocks below which the Low_llfc signal to + interface #n is asserted. */ +#define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c +/* [RW 11] The number of blocks guarantied for class 0 in MAC 0. The + * register is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_0_GUARANTIED 0x60244 +/* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC + * 1 before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST 0x60254 +/* [RW 11] The number of blocks guarantied for class 1 in MAC 0. The + * register is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_1_GUARANTIED 0x60248 +/* [RW 11] The hysteresis on the guarantied buffer space for class 1in MAC 0 + * before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST 0x60258 +/* [RW 11] The number of blocks guarantied for class 0in MAC1.The register + * is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_0_GUARANTIED 0x6024c +/* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC + * 1 before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST 0x6025c +/* [RW 11] The number of blocks guarantied for class 1 in MAC 1. The + * register is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_1_GUARANTIED 0x60250 +/* [RW 11] The hysteresis on the guarantied buffer space for class 1 in MAC + * 1 before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST 0x60260 +/* [RW 11] The number of blocks guarantied for the MAC port. The register is + * applicable only when per_class_guaranty_mode is reset. */ +#define BRB1_REG_MAC_GUARANTIED_0 0x601e8 +#define BRB1_REG_MAC_GUARANTIED_1 0x60240 +/* [R 24] The number of full blocks. */ +#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090 +/* [ST 32] The number of cycles that the write_full signal towards MAC #0 + was asserted. */ +#define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8 +#define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc +#define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8 +/* [ST 32] The number of cycles that the pause signal towards MAC #0 was + asserted. */ +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8 +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc +/* [RW 10] The number of free blocks below which the pause signal to class 0 + * is asserted */ +#define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 0x601c0 +#define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 0x60220 +/* [RW 11] The number of free blocks above which the pause signal to class 0 + * is de-asserted */ +#define BRB1_REG_PAUSE_0_XON_THRESHOLD_0 0x601c4 +#define BRB1_REG_PAUSE_0_XON_THRESHOLD_1 0x60224 +/* [RW 11] The number of free blocks below which the pause signal to class 1 + * is asserted */ +#define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0 0x601c8 +#define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 0x60228 +/* [RW 11] The number of free blocks above which the pause signal to class 1 + * is de-asserted */ +#define BRB1_REG_PAUSE_1_XON_THRESHOLD_0 0x601cc +#define BRB1_REG_PAUSE_1_XON_THRESHOLD_1 0x6022c +/* [RW 10] Write client 0: De-assert pause threshold. Not Functional */ +#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078 +#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c +/* [RW 10] Write client 0: Assert pause threshold. */ +#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068 +/* [RW 1] Indicates if to use per-class guaranty mode (new mode) or per-MAC + * guaranty mode (backwards-compatible mode). 0=per-MAC guaranty mode (BC + * mode). 1=per-class guaranty mode (new mode). */ +#define BRB1_REG_PER_CLASS_GUARANTY_MODE 0x60268 +/* [R 24] The number of full blocks occpied by port. */ +#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094 +/* [RW 1] Reset the design by software. */ +#define BRB1_REG_SOFT_RESET 0x600dc +/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */ +#define CCM_REG_CAM_OCCUP 0xd0188 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_CFC_IFEN 0xd003c +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_CQM_IFEN 0xd000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. + Otherwise 0 is inserted. */ +#define CCM_REG_CCM_CQM_USE_Q 0xd00c0 +/* [RW 11] Interrupt mask register #0 read/write */ +#define CCM_REG_CCM_INT_MASK 0xd01e4 +/* [R 11] Interrupt register #0 read */ +#define CCM_REG_CCM_INT_STS 0xd01d8 +/* [RW 27] Parity mask register #0 read/write */ +#define CCM_REG_CCM_PRTY_MASK 0xd01f4 +/* [R 27] Parity register #0 read */ +#define CCM_REG_CCM_PRTY_STS 0xd01e8 +/* [RC 27] Parity register #0 read clear */ +#define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec +/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the input message Reg1WbFlg isn't set. */ +#define CCM_REG_CCM_REG0_SZ 0xd00c4 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_STORM0_IFEN 0xd0004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_STORM1_IFEN 0xd0008 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define CCM_REG_CDU_AG_RD_IFEN 0xd0030 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define CCM_REG_CDU_AG_WR_IFEN 0xd002c +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define CCM_REG_CDU_SM_RD_IFEN 0xd0038 +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define CCM_REG_CDU_SM_WR_IFEN 0xd0034 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define CCM_REG_CFC_INIT_CRD 0xd0204 +/* [RW 2] Auxiliary counter flag Q number 1. */ +#define CCM_REG_CNT_AUX1_Q 0xd00c8 +/* [RW 2] Auxiliary counter flag Q number 2. */ +#define CCM_REG_CNT_AUX2_Q 0xd00cc +/* [RW 28] The CM header value for QM request (primary). */ +#define CCM_REG_CQM_CCM_HDR_P 0xd008c +/* [RW 28] The CM header value for QM request (secondary). */ +#define CCM_REG_CQM_CCM_HDR_S 0xd0090 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CQM_CCM_IFEN 0xd0014 +/* [RW 6] QM output initial credit. Max credit available - 32. Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define CCM_REG_CQM_INIT_CRD 0xd020c +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CQM_P_WEIGHT 0xd00b8 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CQM_S_WEIGHT 0xd00bc +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CSDM_IFEN 0xd0018 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the SDM interface is detected. */ +#define CCM_REG_CSDM_LENGTH_MIS 0xd0170 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CSDM_WEIGHT 0xd00b4 +/* [RW 28] The CM header for QM formatting in case of an error in the QM + inputs. */ +#define CCM_REG_ERR_CCM_HDR 0xd0094 +/* [RW 8] The Event ID in case the input message ErrorFlg is set. */ +#define CCM_REG_ERR_EVNT_ID 0xd0098 +/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define CCM_REG_FIC0_INIT_CRD 0xd0210 +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define CCM_REG_FIC1_INIT_CRD 0xd0214 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr; + ~ccm_registers_gr_ld0_pr.gr_ld0_pr and + ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and + outputs to STORM: aggregation; load FIC0; load FIC1 and store. */ +#define CCM_REG_GR_ARB_TYPE 0xd015c +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed; that the Store channel priority is + the compliment to 4 of the rest priorities - Aggregation channel; Load + (FIC0) channel and Load (FIC1). */ +#define CCM_REG_GR_LD0_PR 0xd0164 +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed; that the Store channel priority is + the compliment to 4 of the rest priorities - Aggregation channel; Load + (FIC0) channel and Load (FIC1). */ +#define CCM_REG_GR_LD1_PR 0xd0168 +/* [RW 2] General flags index. */ +#define CCM_REG_INV_DONE_Q 0xd0108 +/* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM + context and sent to STORM; for a specific connection type. The double + REG-pairs are used in order to align to STORM context row size of 128 + bits. The offset of these data in the STORM context is always 0. Index + _(0..15) stands for the connection type (one of 16). */ +#define CCM_REG_N_SM_CTX_LD_0 0xd004c +#define CCM_REG_N_SM_CTX_LD_1 0xd0050 +#define CCM_REG_N_SM_CTX_LD_2 0xd0054 +#define CCM_REG_N_SM_CTX_LD_3 0xd0058 +#define CCM_REG_N_SM_CTX_LD_4 0xd005c +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_PBF_IFEN 0xd0028 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the pbf interface is detected. */ +#define CCM_REG_PBF_LENGTH_MIS 0xd0180 +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_PBF_WEIGHT 0xd00ac +#define CCM_REG_PHYS_QNUM1_0 0xd0134 +#define CCM_REG_PHYS_QNUM1_1 0xd0138 +#define CCM_REG_PHYS_QNUM2_0 0xd013c +#define CCM_REG_PHYS_QNUM2_1 0xd0140 +#define CCM_REG_PHYS_QNUM3_0 0xd0144 +#define CCM_REG_PHYS_QNUM3_1 0xd0148 +#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114 +#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118 +#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c +#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120 +#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124 +#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128 +#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c +#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_STORM_CCM_IFEN 0xd0010 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the STORM interface is detected. */ +#define CCM_REG_STORM_LENGTH_MIS 0xd016c +/* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin) + mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for + weight 1(least prioritised); 2 stands for weight 2 (more prioritised); + tc. */ +#define CCM_REG_STORM_WEIGHT 0xd009c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_TSEM_IFEN 0xd001c +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the tsem interface is detected. */ +#define CCM_REG_TSEM_LENGTH_MIS 0xd0174 +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_TSEM_WEIGHT 0xd00a0 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_USEM_IFEN 0xd0024 +/* [RC 1] Set when message length mismatch (relative to last indication) at + the usem interface is detected. */ +#define CCM_REG_USEM_LENGTH_MIS 0xd017c +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_USEM_WEIGHT 0xd00a8 +/* [RW 1] Input xsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_XSEM_IFEN 0xd0020 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the xsem interface is detected. */ +#define CCM_REG_XSEM_LENGTH_MIS 0xd0178 +/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_XSEM_WEIGHT 0xd00a4 +/* [RW 19] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - message length; [12:6] - message + pointer; 18:13] - next pointer. */ +#define CCM_REG_XX_DESCR_TABLE 0xd0300 +#define CCM_REG_XX_DESCR_TABLE_SIZE 24 +/* [R 7] Used to read the value of XX protection Free counter. */ +#define CCM_REG_XX_FREE 0xd0184 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 127. Write writes the initial credit + value; read returns the current value of the credit counter. Must be + initialized to maximum XX protected message size - 2 at start-up. */ +#define CCM_REG_XX_INIT_CRD 0xd0220 +/* [RW 7] The maximum number of pending messages; which may be stored in XX + protection. At read the ~ccm_registers_xx_free.xx_free counter is read. + At write comprises the start value of the ~ccm_registers_xx_free.xx_free + counter. */ +#define CCM_REG_XX_MSG_NUM 0xd0224 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define CCM_REG_XX_OVFL_EVNT_ID 0xd0044 +/* [RW 18] Indirect access to the XX table of the XX protection mechanism. + The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] - + header pointer. */ +#define CCM_REG_XX_TABLE 0xd0280 +#define CDU_REG_CDU_CHK_MASK0 0x101000 +#define CDU_REG_CDU_CHK_MASK1 0x101004 +#define CDU_REG_CDU_CONTROL0 0x101008 +#define CDU_REG_CDU_DEBUG 0x101010 +#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020 +/* [RW 7] Interrupt mask register #0 read/write */ +#define CDU_REG_CDU_INT_MASK 0x10103c +/* [R 7] Interrupt register #0 read */ +#define CDU_REG_CDU_INT_STS 0x101030 +/* [RW 5] Parity mask register #0 read/write */ +#define CDU_REG_CDU_PRTY_MASK 0x10104c +/* [R 5] Parity register #0 read */ +#define CDU_REG_CDU_PRTY_STS 0x101040 +/* [RC 5] Parity register #0 read clear */ +#define CDU_REG_CDU_PRTY_STS_CLR 0x101044 +/* [RC 32] logging of error data in case of a CDU load error: + {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; + ype_error; ctual_active; ctual_compressed_context}; */ +#define CDU_REG_ERROR_DATA 0x101014 +/* [WB 216] L1TT ram access. each entry has the following format : + {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0]; + ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */ +#define CDU_REG_L1TT 0x101800 +/* [WB 24] MATT ram access. each entry has the following + format:{RegionLength[11:0]; egionOffset[11:0]} */ +#define CDU_REG_MATT 0x101100 +/* [RW 1] when this bit is set the CDU operates in e1hmf mode */ +#define CDU_REG_MF_MODE 0x101050 +/* [R 1] indication the initializing the activity counter by the hardware + was done. */ +#define CFC_REG_AC_INIT_DONE 0x104078 +/* [RW 13] activity counter ram access */ +#define CFC_REG_ACTIVITY_COUNTER 0x104400 +#define CFC_REG_ACTIVITY_COUNTER_SIZE 256 +/* [R 1] indication the initializing the cams by the hardware was done. */ +#define CFC_REG_CAM_INIT_DONE 0x10407c +/* [RW 2] Interrupt mask register #0 read/write */ +#define CFC_REG_CFC_INT_MASK 0x104108 +/* [R 2] Interrupt register #0 read */ +#define CFC_REG_CFC_INT_STS 0x1040fc +/* [RC 2] Interrupt register #0 read clear */ +#define CFC_REG_CFC_INT_STS_CLR 0x104100 +/* [RW 4] Parity mask register #0 read/write */ +#define CFC_REG_CFC_PRTY_MASK 0x104118 +/* [R 4] Parity register #0 read */ +#define CFC_REG_CFC_PRTY_STS 0x10410c +/* [RC 4] Parity register #0 read clear */ +#define CFC_REG_CFC_PRTY_STS_CLR 0x104110 +/* [RW 21] CID cam access (21:1 - Data; alid - 0) */ +#define CFC_REG_CID_CAM 0x104800 +#define CFC_REG_CONTROL0 0x104028 +#define CFC_REG_DEBUG0 0x104050 +/* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error + vector) whether the cfc should be disabled upon it */ +#define CFC_REG_DISABLE_ON_ERROR 0x104044 +/* [RC 14] CFC error vector. when the CFC detects an internal error it will + set one of these bits. the bit description can be found in CFC + specifications */ +#define CFC_REG_ERROR_VECTOR 0x10403c +/* [WB 93] LCID info ram access */ +#define CFC_REG_INFO_RAM 0x105000 +#define CFC_REG_INFO_RAM_SIZE 1024 +#define CFC_REG_INIT_REG 0x10404c +#define CFC_REG_INTERFACES 0x104058 +/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this + field allows changing the priorities of the weighted-round-robin arbiter + which selects which CFC load client should be served next */ +#define CFC_REG_LCREQ_WEIGHTS 0x104084 +/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */ +#define CFC_REG_LINK_LIST 0x104c00 +#define CFC_REG_LINK_LIST_SIZE 256 +/* [R 1] indication the initializing the link list by the hardware was done. */ +#define CFC_REG_LL_INIT_DONE 0x104074 +/* [R 9] Number of allocated LCIDs which are at empty state */ +#define CFC_REG_NUM_LCIDS_ALLOC 0x104020 +/* [R 9] Number of Arriving LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004 +#define CFC_REG_NUM_LCIDS_INSIDE_PF 0x104120 +/* [R 9] Number of Leaving LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_LEAVING 0x104018 +#define CFC_REG_WEAK_ENABLE_PF 0x104124 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define CSDM_REG_AGG_INT_EVENT_0 0xc2038 +#define CSDM_REG_AGG_INT_EVENT_10 0xc2060 +#define CSDM_REG_AGG_INT_EVENT_11 0xc2064 +#define CSDM_REG_AGG_INT_EVENT_12 0xc2068 +#define CSDM_REG_AGG_INT_EVENT_13 0xc206c +#define CSDM_REG_AGG_INT_EVENT_14 0xc2070 +#define CSDM_REG_AGG_INT_EVENT_15 0xc2074 +#define CSDM_REG_AGG_INT_EVENT_16 0xc2078 +#define CSDM_REG_AGG_INT_EVENT_2 0xc2040 +#define CSDM_REG_AGG_INT_EVENT_3 0xc2044 +#define CSDM_REG_AGG_INT_EVENT_4 0xc2048 +#define CSDM_REG_AGG_INT_EVENT_5 0xc204c +#define CSDM_REG_AGG_INT_EVENT_6 0xc2050 +#define CSDM_REG_AGG_INT_EVENT_7 0xc2054 +#define CSDM_REG_AGG_INT_EVENT_8 0xc2058 +#define CSDM_REG_AGG_INT_EVENT_9 0xc205c +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define CSDM_REG_AGG_INT_MODE_10 0xc21e0 +#define CSDM_REG_AGG_INT_MODE_11 0xc21e4 +#define CSDM_REG_AGG_INT_MODE_12 0xc21e8 +#define CSDM_REG_AGG_INT_MODE_13 0xc21ec +#define CSDM_REG_AGG_INT_MODE_14 0xc21f0 +#define CSDM_REG_AGG_INT_MODE_15 0xc21f4 +#define CSDM_REG_AGG_INT_MODE_16 0xc21f8 +#define CSDM_REG_AGG_INT_MODE_6 0xc21d0 +#define CSDM_REG_AGG_INT_MODE_7 0xc21d4 +#define CSDM_REG_AGG_INT_MODE_8 0xc21d8 +#define CSDM_REG_AGG_INT_MODE_9 0xc21dc +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c +/* [RW 16] The maximum value of the completion counter #1 */ +#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c +/* [RW 32] Interrupt mask register #0 read/write */ +#define CSDM_REG_CSDM_INT_MASK_0 0xc229c +#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac +/* [R 32] Interrupt register #0 read */ +#define CSDM_REG_CSDM_INT_STS_0 0xc2290 +#define CSDM_REG_CSDM_INT_STS_1 0xc22a0 +/* [RW 11] Parity mask register #0 read/write */ +#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc +/* [R 11] Parity register #0 read */ +#define CSDM_REG_CSDM_PRTY_STS 0xc22b0 +/* [RC 11] Parity register #0 read clear */ +#define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4 +#define CSDM_REG_ENABLE_IN1 0xc2238 +#define CSDM_REG_ENABLE_IN2 0xc223c +#define CSDM_REG_ENABLE_OUT1 0xc2240 +#define CSDM_REG_ENABLE_OUT2 0xc2244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc +/* [ST 32] The number of ACK after placement messages received */ +#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c +/* [ST 32] The number of packet end messages received from the parser */ +#define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274 +/* [ST 32] The number of requests received from the pxp async if */ +#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278 +/* [ST 32] The number of commands received in queue 0 */ +#define CSDM_REG_NUM_OF_Q0_CMD 0xc2248 +/* [ST 32] The number of commands received in queue 10 */ +#define CSDM_REG_NUM_OF_Q10_CMD 0xc226c +/* [ST 32] The number of commands received in queue 11 */ +#define CSDM_REG_NUM_OF_Q11_CMD 0xc2270 +/* [ST 32] The number of commands received in queue 1 */ +#define CSDM_REG_NUM_OF_Q1_CMD 0xc224c +/* [ST 32] The number of commands received in queue 3 */ +#define CSDM_REG_NUM_OF_Q3_CMD 0xc2250 +/* [ST 32] The number of commands received in queue 4 */ +#define CSDM_REG_NUM_OF_Q4_CMD 0xc2254 +/* [ST 32] The number of commands received in queue 5 */ +#define CSDM_REG_NUM_OF_Q5_CMD 0xc2258 +/* [ST 32] The number of commands received in queue 6 */ +#define CSDM_REG_NUM_OF_Q6_CMD 0xc225c +/* [ST 32] The number of commands received in queue 7 */ +#define CSDM_REG_NUM_OF_Q7_CMD 0xc2260 +/* [ST 32] The number of commands received in queue 8 */ +#define CSDM_REG_NUM_OF_Q8_CMD 0xc2264 +/* [ST 32] The number of commands received in queue 9 */ +#define CSDM_REG_NUM_OF_Q9_CMD 0xc2268 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558 +/* [RW 32] Tick for timer counter. Applicable only when + ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define CSDM_REG_TIMER_TICK 0xc2000 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define CSEM_REG_ARB_CYCLE_SIZE 0x200034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define CSEM_REG_ARB_ELEMENT0 0x200020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 */ +#define CSEM_REG_ARB_ELEMENT1 0x200024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 + and ~csem_registers_arb_element1.arb_element1 */ +#define CSEM_REG_ARB_ELEMENT2 0x200028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~csem_registers_arb_element0.arb_element0 and + ~csem_registers_arb_element1.arb_element1 and + ~csem_registers_arb_element2.arb_element2 */ +#define CSEM_REG_ARB_ELEMENT3 0x20002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 + and ~csem_registers_arb_element1.arb_element1 and + ~csem_registers_arb_element2.arb_element2 and + ~csem_registers_arb_element3.arb_element3 */ +#define CSEM_REG_ARB_ELEMENT4 0x200030 +/* [RW 32] Interrupt mask register #0 read/write */ +#define CSEM_REG_CSEM_INT_MASK_0 0x200110 +#define CSEM_REG_CSEM_INT_MASK_1 0x200120 +/* [R 32] Interrupt register #0 read */ +#define CSEM_REG_CSEM_INT_STS_0 0x200104 +#define CSEM_REG_CSEM_INT_STS_1 0x200114 +/* [RW 32] Parity mask register #0 read/write */ +#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 +#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 +/* [R 32] Parity register #0 read */ +#define CSEM_REG_CSEM_PRTY_STS_0 0x200124 +#define CSEM_REG_CSEM_PRTY_STS_1 0x200134 +/* [RC 32] Parity register #0 read clear */ +#define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128 +#define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138 +#define CSEM_REG_ENABLE_IN 0x2000a4 +#define CSEM_REG_ENABLE_OUT 0x2000a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define CSEM_REG_FAST_MEMORY 0x220000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define CSEM_REG_FIC0_DISABLE 0x200224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define CSEM_REG_FIC1_DISABLE 0x200234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define CSEM_REG_INT_TABLE 0x200400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define CSEM_REG_MSG_NUM_FIC0 0x200000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define CSEM_REG_MSG_NUM_FIC1 0x200004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define CSEM_REG_MSG_NUM_FOC0 0x200008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define CSEM_REG_MSG_NUM_FOC1 0x20000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define CSEM_REG_MSG_NUM_FOC2 0x200010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define CSEM_REG_MSG_NUM_FOC3 0x200014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define CSEM_REG_PAS_DISABLE 0x20024c +/* [WB 128] Debug only. Passive buffer memory */ +#define CSEM_REG_PASSIVE_BUFFER 0x202000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define CSEM_REG_PRAM 0x240000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define CSEM_REG_THREADS_LIST 0x2002e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define CSEM_REG_TS_0_AS 0x200038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define CSEM_REG_TS_10_AS 0x200060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define CSEM_REG_TS_11_AS 0x200064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define CSEM_REG_TS_12_AS 0x200068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define CSEM_REG_TS_13_AS 0x20006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define CSEM_REG_TS_14_AS 0x200070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define CSEM_REG_TS_15_AS 0x200074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define CSEM_REG_TS_16_AS 0x200078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define CSEM_REG_TS_17_AS 0x20007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define CSEM_REG_TS_18_AS 0x200080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define CSEM_REG_TS_1_AS 0x20003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define CSEM_REG_TS_2_AS 0x200040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define CSEM_REG_TS_3_AS 0x200044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define CSEM_REG_TS_4_AS 0x200048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define CSEM_REG_TS_5_AS 0x20004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define CSEM_REG_TS_6_AS 0x200050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define CSEM_REG_TS_7_AS 0x200054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define CSEM_REG_TS_8_AS 0x200058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define CSEM_REG_TS_9_AS 0x20005c +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define CSEM_REG_VFPF_ERR_NUM 0x200380 +/* [RW 1] Parity mask register #0 read/write */ +#define DBG_REG_DBG_PRTY_MASK 0xc0a8 +/* [R 1] Parity register #0 read */ +#define DBG_REG_DBG_PRTY_STS 0xc09c +/* [RC 1] Parity register #0 read clear */ +#define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0 +/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The + * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0; + * 4.Completion function=0; 5.Error handling=0 */ +#define DMAE_REG_BACKWARD_COMP_EN 0x10207c +/* [RW 32] Commands memory. The address to command X; row Y is to calculated + as 14*X+Y. */ +#define DMAE_REG_CMD_MEM 0x102400 +#define DMAE_REG_CMD_MEM_SIZE 224 +/* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c + initial value is all ones. */ +#define DMAE_REG_CRC16C_INIT 0x10201c +/* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the + CRC-16 T10 initial value is all ones. */ +#define DMAE_REG_CRC16T10_INIT 0x102020 +/* [RW 2] Interrupt mask register #0 read/write */ +#define DMAE_REG_DMAE_INT_MASK 0x102054 +/* [RW 4] Parity mask register #0 read/write */ +#define DMAE_REG_DMAE_PRTY_MASK 0x102064 +/* [R 4] Parity register #0 read */ +#define DMAE_REG_DMAE_PRTY_STS 0x102058 +/* [RC 4] Parity register #0 read clear */ +#define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c +/* [RW 1] Command 0 go. */ +#define DMAE_REG_GO_C0 0x102080 +/* [RW 1] Command 1 go. */ +#define DMAE_REG_GO_C1 0x102084 +/* [RW 1] Command 10 go. */ +#define DMAE_REG_GO_C10 0x102088 +/* [RW 1] Command 11 go. */ +#define DMAE_REG_GO_C11 0x10208c +/* [RW 1] Command 12 go. */ +#define DMAE_REG_GO_C12 0x102090 +/* [RW 1] Command 13 go. */ +#define DMAE_REG_GO_C13 0x102094 +/* [RW 1] Command 14 go. */ +#define DMAE_REG_GO_C14 0x102098 +/* [RW 1] Command 15 go. */ +#define DMAE_REG_GO_C15 0x10209c +/* [RW 1] Command 2 go. */ +#define DMAE_REG_GO_C2 0x1020a0 +/* [RW 1] Command 3 go. */ +#define DMAE_REG_GO_C3 0x1020a4 +/* [RW 1] Command 4 go. */ +#define DMAE_REG_GO_C4 0x1020a8 +/* [RW 1] Command 5 go. */ +#define DMAE_REG_GO_C5 0x1020ac +/* [RW 1] Command 6 go. */ +#define DMAE_REG_GO_C6 0x1020b0 +/* [RW 1] Command 7 go. */ +#define DMAE_REG_GO_C7 0x1020b4 +/* [RW 1] Command 8 go. */ +#define DMAE_REG_GO_C8 0x1020b8 +/* [RW 1] Command 9 go. */ +#define DMAE_REG_GO_C9 0x1020bc +/* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge + input is disregarded; valid is deasserted; all other signals are treated + as usual; if 1 - normal activity. */ +#define DMAE_REG_GRC_IFEN 0x102008 +/* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the + acknowledge input is disregarded; valid is deasserted; full is asserted; + all other signals are treated as usual; if 1 - normal activity. */ +#define DMAE_REG_PCI_IFEN 0x102004 +/* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the + initial value to the credit counter; related to the address. Read returns + the current value of the counter. */ +#define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD0 0x170060 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD1 0x170064 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD2 0x170068 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD3 0x17006c +/* [RW 28] UCM Header. */ +#define DORQ_REG_CMHEAD_RX 0x170050 +/* [RW 32] Doorbell address for RBC doorbells (function 0). */ +#define DORQ_REG_DB_ADDR0 0x17008c +/* [RW 5] Interrupt mask register #0 read/write */ +#define DORQ_REG_DORQ_INT_MASK 0x170180 +/* [R 5] Interrupt register #0 read */ +#define DORQ_REG_DORQ_INT_STS 0x170174 +/* [RC 5] Interrupt register #0 read clear */ +#define DORQ_REG_DORQ_INT_STS_CLR 0x170178 +/* [RW 2] Parity mask register #0 read/write */ +#define DORQ_REG_DORQ_PRTY_MASK 0x170190 +/* [R 2] Parity register #0 read */ +#define DORQ_REG_DORQ_PRTY_STS 0x170184 +/* [RC 2] Parity register #0 read clear */ +#define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188 +/* [RW 8] The address to write the DPM CID to STORM. */ +#define DORQ_REG_DPM_CID_ADDR 0x170044 +/* [RW 5] The DPM mode CID extraction offset. */ +#define DORQ_REG_DPM_CID_OFST 0x170030 +/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */ +#define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c +/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */ +#define DORQ_REG_DQ_FIFO_FULL_TH 0x170078 +/* [R 13] Current value of the DQ FIFO fill level according to following + pointer. The range is 0 - 256 FIFO rows; where each row stands for the + doorbell. */ +#define DORQ_REG_DQ_FILL_LVLF 0x1700a4 +/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or + equal to full threshold; reset on full clear. */ +#define DORQ_REG_DQ_FULL_ST 0x1700c0 +/* [RW 28] The value sent to CM header in the case of CFC load error. */ +#define DORQ_REG_ERR_CMHEAD 0x170058 +#define DORQ_REG_IF_EN 0x170004 +#define DORQ_REG_MAX_RVFID_SIZE 0x1701ec +#define DORQ_REG_MODE_ACT 0x170008 +/* [RW 5] The normal mode CID extraction offset. */ +#define DORQ_REG_NORM_CID_OFST 0x17002c +/* [RW 28] TCM Header when only TCP context is loaded. */ +#define DORQ_REG_NORM_CMHEAD_TX 0x17004c +/* [RW 3] The number of simultaneous outstanding requests to Context Fetch + Interface. */ +#define DORQ_REG_OUTST_REQ 0x17003c +#define DORQ_REG_PF_USAGE_CNT 0x1701d0 +#define DORQ_REG_REGN 0x170038 +/* [R 4] Current value of response A counter credit. Initial credit is + configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd + register. */ +#define DORQ_REG_RSPA_CRD_CNT 0x1700ac +/* [R 4] Current value of response B counter credit. Initial credit is + configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd + register. */ +#define DORQ_REG_RSPB_CRD_CNT 0x1700b0 +/* [RW 4] The initial credit at the Doorbell Response Interface. The write + writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The + read reads this written value. */ +#define DORQ_REG_RSP_INIT_CRD 0x170048 +#define DORQ_REG_RSPB_CRD_CNT 0x1700b0 +#define DORQ_REG_VF_NORM_CID_BASE 0x1701a0 +#define DORQ_REG_VF_NORM_CID_OFST 0x1701f4 +#define DORQ_REG_VF_NORM_CID_WND_SIZE 0x1701a4 +#define DORQ_REG_VF_NORM_MAX_CID_COUNT 0x1701e4 +#define DORQ_REG_VF_NORM_VF_BASE 0x1701a8 +/* [RW 10] VF type validation mask value */ +#define DORQ_REG_VF_TYPE_MASK_0 0x170218 +/* [RW 17] VF type validation Min MCID value */ +#define DORQ_REG_VF_TYPE_MAX_MCID_0 0x1702d8 +/* [RW 17] VF type validation Max MCID value */ +#define DORQ_REG_VF_TYPE_MIN_MCID_0 0x170298 +/* [RW 10] VF type validation comp value */ +#define DORQ_REG_VF_TYPE_VALUE_0 0x170258 +#define DORQ_REG_VF_USAGE_CT_LIMIT 0x170340 + +/* [RW 4] Initial activity counter value on the load request; when the + shortcut is done. */ +#define DORQ_REG_SHRT_ACT_CNT 0x170070 +/* [RW 28] TCM Header when both ULP and TCP context is loaded. */ +#define DORQ_REG_SHRT_CMHEAD 0x170054 +#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4) +#define HC_CONFIG_0_REG_BLOCK_DISABLE_0 (0x1<<0) +#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3) +#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7) +#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) +#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) +#define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1<<0) +#define DORQ_REG_VF_USAGE_CNT 0x170320 +#define HC_REG_AGG_INT_0 0x108050 +#define HC_REG_AGG_INT_1 0x108054 +#define HC_REG_ATTN_BIT 0x108120 +#define HC_REG_ATTN_IDX 0x108100 +#define HC_REG_ATTN_MSG0_ADDR_L 0x108018 +#define HC_REG_ATTN_MSG1_ADDR_L 0x108020 +#define HC_REG_ATTN_NUM_P0 0x108038 +#define HC_REG_ATTN_NUM_P1 0x10803c +#define HC_REG_COMMAND_REG 0x108180 +#define HC_REG_CONFIG_0 0x108000 +#define HC_REG_CONFIG_1 0x108004 +#define HC_REG_FUNC_NUM_P0 0x1080ac +#define HC_REG_FUNC_NUM_P1 0x1080b0 +/* [RW 3] Parity mask register #0 read/write */ +#define HC_REG_HC_PRTY_MASK 0x1080a0 +/* [R 3] Parity register #0 read */ +#define HC_REG_HC_PRTY_STS 0x108094 +/* [RC 3] Parity register #0 read clear */ +#define HC_REG_HC_PRTY_STS_CLR 0x108098 +#define HC_REG_INT_MASK 0x108108 +#define HC_REG_LEADING_EDGE_0 0x108040 +#define HC_REG_LEADING_EDGE_1 0x108048 +#define HC_REG_MAIN_MEMORY 0x108800 +#define HC_REG_MAIN_MEMORY_SIZE 152 +#define HC_REG_P0_PROD_CONS 0x108200 +#define HC_REG_P1_PROD_CONS 0x108400 +#define HC_REG_PBA_COMMAND 0x108140 +#define HC_REG_PCI_CONFIG_0 0x108010 +#define HC_REG_PCI_CONFIG_1 0x108014 +#define HC_REG_STATISTIC_COUNTERS 0x109000 +#define HC_REG_TRAILING_EDGE_0 0x108044 +#define HC_REG_TRAILING_EDGE_1 0x10804c +#define HC_REG_UC_RAM_ADDR_0 0x108028 +#define HC_REG_UC_RAM_ADDR_1 0x108030 +#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 +#define HC_REG_VQID_0 0x108008 +#define HC_REG_VQID_1 0x10800c +#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1<<1) +#define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE (0x1<<0) +#define IGU_REG_ATTENTION_ACK_BITS 0x130108 +/* [R 4] Debug: attn_fsm */ +#define IGU_REG_ATTN_FSM 0x130054 +#define IGU_REG_ATTN_MSG_ADDR_H 0x13011c +#define IGU_REG_ATTN_MSG_ADDR_L 0x130120 +/* [R 4] Debug: [3] - attention write done message is pending (0-no pending; + * 1-pending). [2:0] = PFID. Pending means attention message was sent; but + * write done didn't receive. */ +#define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030 +#define IGU_REG_BLOCK_CONFIGURATION 0x130000 +#define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124 +#define IGU_REG_COMMAND_REG_CTRL 0x13012c +/* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit + * is clear. The bits in this registers are set and clear via the producer + * command. Data valid only in addresses 0-4. all the rest are zero. */ +#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200 +/* [R 5] Debug: ctrl_fsm */ +#define IGU_REG_CTRL_FSM 0x130064 +/* [R 1] data available for error memory. If this bit is clear do not red + * from error_handling_memory. */ +#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130 +/* [RW 11] Parity mask register #0 read/write */ +#define IGU_REG_IGU_PRTY_MASK 0x1300a8 +/* [R 11] Parity register #0 read */ +#define IGU_REG_IGU_PRTY_STS 0x13009c +/* [RC 11] Parity register #0 read clear */ +#define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0 +/* [R 4] Debug: int_handle_fsm */ +#define IGU_REG_INT_HANDLE_FSM 0x130050 +#define IGU_REG_LEADING_EDGE_LATCH 0x130134 +/* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid. + * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF + * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */ +#define IGU_REG_MAPPING_MEMORY 0x131000 +#define IGU_REG_MAPPING_MEMORY_SIZE 136 +#define IGU_REG_PBA_STATUS_LSB 0x130138 +#define IGU_REG_PBA_STATUS_MSB 0x13013c +#define IGU_REG_PCI_PF_MSI_EN 0x130140 +#define IGU_REG_PCI_PF_MSIX_EN 0x130144 +#define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148 +/* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no + * pending; 1 = pending. Pendings means interrupt was asserted; and write + * done was not received. Data valid only in addresses 0-4. all the rest are + * zero. */ +#define IGU_REG_PENDING_BITS_STATUS 0x130300 +#define IGU_REG_PF_CONFIGURATION 0x130154 +/* [RW 20] producers only. E2 mode: address 0-135 match to the mapping + * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default + * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod; + * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode + * - In backward compatible mode; for non default SB; each even line in the + * memory holds the U producer and each odd line hold the C producer. The + * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The + * last 20 producers are for the DSB for each PF. each PF has five segments + * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods; + * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */ +#define IGU_REG_PROD_CONS_MEMORY 0x132000 +/* [R 3] Debug: pxp_arb_fsm */ +#define IGU_REG_PXP_ARB_FSM 0x130068 +/* [RW 6] Write one for each bit will reset the appropriate memory. When the + * memory reset finished the appropriate bit will be clear. Bit 0 - mapping + * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3 + * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */ +#define IGU_REG_RESET_MEMORIES 0x130158 +/* [R 4] Debug: sb_ctrl_fsm */ +#define IGU_REG_SB_CTRL_FSM 0x13004c +#define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c +#define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160 +#define IGU_REG_SB_MASK_LSB 0x130164 +#define IGU_REG_SB_MASK_MSB 0x130168 +/* [RW 16] Number of command that were dropped without causing an interrupt + * due to: read access for WO BAR address; or write access for RO BAR + * address or any access for reserved address or PCI function error is set + * and address is not MSIX; PBA or cleanup */ +#define IGU_REG_SILENT_DROP 0x13016c +/* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 - + * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per + * PF; 68-71 number of ATTN messages per PF */ +#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800 +/* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a + * timer mask command arrives. Value must be bigger than 100. */ +#define IGU_REG_TIMER_MASKING_VALUE 0x13003c +#define IGU_REG_TRAILING_EDGE_LATCH 0x130104 +#define IGU_REG_VF_CONFIGURATION 0x130170 +/* [WB_R 32] Each bit represent write done pending bits status for that SB + * (MSI/MSIX message was sent and write done was not received yet). 0 = + * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */ +#define IGU_REG_WRITE_DONE_PENDING 0x130480 +#define MCP_A_REG_MCPR_SCRATCH 0x3a0000 +#define MCP_REG_MCPR_ACCESS_LOCK 0x8009c +#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c +#define MCP_REG_MCPR_GP_INPUTS 0x800c0 +#define MCP_REG_MCPR_GP_OENABLE 0x800c8 +#define MCP_REG_MCPR_GP_OUTPUTS 0x800c4 +#define MCP_REG_MCPR_IMC_COMMAND 0x85900 +#define MCP_REG_MCPR_IMC_DATAREG0 0x85920 +#define MCP_REG_MCPR_IMC_SLAVE_CONTROL 0x85904 +#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c +#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424 +#define MCP_REG_MCPR_NVM_ADDR 0x8640c +#define MCP_REG_MCPR_NVM_CFG4 0x8642c +#define MCP_REG_MCPR_NVM_COMMAND 0x86400 +#define MCP_REG_MCPR_NVM_READ 0x86410 +#define MCP_REG_MCPR_NVM_SW_ARB 0x86420 +#define MCP_REG_MCPR_NVM_WRITE 0x86408 +#define MCP_REG_MCPR_SCRATCH 0xa0000 +#define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK (0x1<<1) +#define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK (0x1<<0) +/* [R 32] read first 32 bit after inversion of function 0. mapped as + follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; + [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] + GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE + glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0; + [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] + MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB + Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw + interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity + error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw + interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF + Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c +#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430 +/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434 +/* [R 32] read second 32 bit after inversion of function 0. mapped as + follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438 +#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c +/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0] + PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error; + [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; + [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] + XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] + DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity + error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux + PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; + [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; + [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; + [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; + [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440 +/* [R 32] read third 32 bit after inversion of function 0. mapped as + follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity + error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5] + PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444 +#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448 +/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0] + CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP + Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient + Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity + error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw + interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14] + MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17] + Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW + timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3 + func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1 + func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW + timers attn_4 func1; [30] General attn0; [31] General attn1; */ +#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c +/* [R 32] read fourth 32 bit after inversion of function 0. mapped as + follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450 +#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454 +/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0] + General attn2; [1] General attn3; [2] General attn4; [3] General attn5; + [4] General attn6; [5] General attn7; [6] General attn8; [7] General + attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11] + General attn13; [12] General attn14; [13] General attn15; [14] General + attn16; [15] General attn17; [16] General attn18; [17] General attn19; + [18] General attn20; [19] General attn21; [20] Main power interrupt; [21] + RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24] + RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout + attention; [27] GRC Latched reserved access attention; [28] MCP Latched + rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched + ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 +/* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as + * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC + * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] + * CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */ +#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700 +/* [W 14] write to this register results with the clear of the latched + signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in + d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP + latch; one in d5 clears GRC Latched timeout attention; one in d6 clears + GRC Latched reserved access attention; one in d7 clears Latched + rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears + Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both + ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears + pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read + from this register return zero */ +#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c +/* [RW 32] first 32b for enabling the output for function 0 output0. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc +/* [RW 32] first 32b for enabling the output for function 1 output0. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function + 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c +/* [RW 32] first 32b for enabling the output for close the gate nig. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec +#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c +/* [RW 32] first 32b for enabling the output for close the gate pxp. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc +#define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c +/* [RW 32] second 32b for enabling the output for function 0 output0. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070 +#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080 +/* [RW 32] second 32b for enabling the output for function 1 output0. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110 +#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120 +/* [RW 32] second 32b for enabling the output for close the gate nig. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0 +#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190 +/* [RW 32] second 32b for enabling the output for close the gate pxp. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100 +#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0 +/* [RW 32] third 32b for enabling the output for function 0 output0. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074 +#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084 +/* [RW 32] third 32b for enabling the output for function 1 output0. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114 +#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124 +/* [RW 32] third 32b for enabling the output for close the gate nig. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4 +#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194 +/* [RW 32] third 32b for enabling the output for close the gate pxp. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104 +#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4 +/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8 +/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188 +/* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8 +#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198 +/* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108 +#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8 +/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped + * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC + * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] + * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1 + * parity; [31-10] Reserved; */ +#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688 +/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped + * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC + * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] + * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1 + * parity; [31-10] Reserved; */ +#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0 +/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu + 128 bit vector */ +#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000 +#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004 +#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 +#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c +#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030 +#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 +#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c +#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 +#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 +#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 +#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c +#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 +#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 +#define MISC_REG_AEU_GENERAL_MASK 0xa61c +/* [RW 32] first 32b for inverting the input for function 0; for each bit: + 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for + function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; + [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1; + [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication + for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS + Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw + interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM + Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI + Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c +#define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c +/* [RW 32] second 32b for inverting the input for function 0; for each bit: + 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity + error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw + interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM + Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw + interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] + DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity + error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux + PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; + [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; + [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; + [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; + [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230 +#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240 +/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0; + [9:8] = raserved. Zero = mask; one = unmask */ +#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060 +#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064 +/* [RW 1] If set a system kill occurred */ +#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610 +/* [RW 32] Represent the status of the input vector to the AEU when a system + kill occurred. The register is reset in por reset. Mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600 +#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604 +#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608 +#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c +/* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1 + Port. */ +#define MISC_REG_BOND_ID 0xa400 +/* [R 16] These bits indicate the part number for the chip. */ +#define MISC_REG_CHIP_NUM 0xa408 +/* [R 4] These bits indicate the base revision of the chip. This value + starts at 0x0 for the A0 tape-out and increments by one for each + all-layer tape-out. */ +#define MISC_REG_CHIP_REV 0xa40c +/* [R 14] otp_misc_do[100:0] spare bits collection: 13:11- + * otp_misc_do[100:98]; 10:7 - otp_misc_do[87:84]; 6:3 - otp_misc_do[75:72]; + * 2:1 - otp_misc_do[51:50]; 0 - otp_misc_do[1]. */ +#define MISC_REG_CHIP_TYPE 0xac60 +#define MISC_REG_CHIP_TYPE_57811_MASK (1<<1) +#define MISC_REG_CPMU_LP_DR_ENABLE 0xa858 +/* [RW 1] FW EEE LPI Enable. When 1 indicates that EEE LPI mode is enabled + * by FW. When 0 indicates that the EEE LPI mode is disabled by FW. Clk + * 25MHz. Reset on hard reset. */ +#define MISC_REG_CPMU_LP_FW_ENABLE_P0 0xa84c +/* [RW 32] EEE LPI Idle Threshold. The threshold value for the idle EEE LPI + * counter. Timer tick is 1 us. Clock 25MHz. Reset on hard reset. */ +#define MISC_REG_CPMU_LP_IDLE_THR_P0 0xa8a0 +/* [RW 18] LPI entry events mask. [0] - Vmain SM Mask. When 1 indicates that + * the Vmain SM end state is disabled. When 0 indicates that the Vmain SM + * end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates that + * the FW command that all Queues are empty is disabled. When 0 indicates + * that the FW command that all Queues are empty is enabled. [2] - FW Early + * Exit Mask / Reserved (Entry mask). When 1 indicates that the FW Early + * Exit command is disabled. When 0 indicates that the FW Early Exit command + * is enabled. This bit applicable only in the EXIT Events Mask registers. + * [3] - PBF Request Mask. When 1 indicates that the PBF Request indication + * is disabled. When 0 indicates that the PBF Request indication is enabled. + * [4] - Tx Request Mask. When =1 indicates that the Tx other Than PBF + * Request indication is disabled. When 0 indicates that the Tx Other Than + * PBF Request indication is enabled. [5] - Rx EEE LPI Status Mask. When 1 + * indicates that the RX EEE LPI Status indication is disabled. When 0 + * indicates that the RX EEE LPI Status indication is enabled. In the EXIT + * Events Masks registers; this bit masks the falling edge detect of the LPI + * Status (Rx LPI is on - off). [6] - Tx Pause Mask. When 1 indicates that + * the Tx Pause indication is disabled. When 0 indicates that the Tx Pause + * indication is enabled. [7] - BRB1 Empty Mask. When 1 indicates that the + * BRB1 EMPTY indication is disabled. When 0 indicates that the BRB1 EMPTY + * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM + * IDLE indication is disabled. When 0 indicates that the QM IDLE indication + * is enabled. (One bit for both VOQ0 and VOQ1). [9] - QM LB Idle Mask. When + * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0 + * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1 + * Status Mask. When 1 indicates that the L1 Status indication from the PCIE + * CORE is disabled. When 0 indicates that the RX EEE LPI Status indication + * from the PCIE CORE is enabled. In the EXIT Events Masks registers; this + * bit masks the falling edge detect of the L1 status (L1 is on - off). [11] + * - P0 E0 EEE EEE LPI REQ Mask. When =1 indicates that the P0 E0 EEE EEE + * LPI REQ indication is disabled. When =0 indicates that the P0 E0 EEE LPI + * REQ indication is enabled. [12] - P1 E0 EEE LPI REQ Mask. When =1 + * indicates that the P0 EEE LPI REQ indication is disabled. When =0 + * indicates that the P0 EEE LPI REQ indication is enabled. [13] - P0 E1 EEE + * LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication is + * disabled. When =0 indicates that the P0 EEE LPI REQ indication is + * enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE + * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ + * indication is enabled. [15] - L1 REQ Mask. When =1 indicates that the L1 + * REQ indication is disabled. When =0 indicates that the L1 indication is + * enabled. [16] - Rx EEE LPI Status Edge Detect Mask. When =1 indicates + * that the RX EEE LPI Status Falling Edge Detect indication is disabled (Rx + * EEE LPI is on - off). When =0 indicates that the RX EEE LPI Status + * Falling Edge Detec indication is enabled (Rx EEE LPI is on - off). This + * bit is applicable only in the EXIT Events Masks registers. [17] - L1 + * Status Edge Detect Mask. When =1 indicates that the L1 Status Falling + * Edge Detect indication from the PCIE CORE is disabled (L1 is on - off). + * When =0 indicates that the L1 Status Falling Edge Detect indication from + * the PCIE CORE is enabled (L1 is on - off). This bit is applicable only in + * the EXIT Events Masks registers. Clock 25MHz. Reset on hard reset. */ +#define MISC_REG_CPMU_LP_MASK_ENT_P0 0xa880 +/* [RW 18] EEE LPI exit events mask. [0] - Vmain SM Mask. When 1 indicates + * that the Vmain SM end state is disabled. When 0 indicates that the Vmain + * SM end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates + * that the FW command that all Queues are empty is disabled. When 0 + * indicates that the FW command that all Queues are empty is enabled. [2] - + * FW Early Exit Mask / Reserved (Entry mask). When 1 indicates that the FW + * Early Exit command is disabled. When 0 indicates that the FW Early Exit + * command is enabled. This bit applicable only in the EXIT Events Mask + * registers. [3] - PBF Request Mask. When 1 indicates that the PBF Request + * indication is disabled. When 0 indicates that the PBF Request indication + * is enabled. [4] - Tx Request Mask. When =1 indicates that the Tx other + * Than PBF Request indication is disabled. When 0 indicates that the Tx + * Other Than PBF Request indication is enabled. [5] - Rx EEE LPI Status + * Mask. When 1 indicates that the RX EEE LPI Status indication is disabled. + * When 0 indicates that the RX LPI Status indication is enabled. In the + * EXIT Events Masks registers; this bit masks the falling edge detect of + * the EEE LPI Status (Rx EEE LPI is on - off). [6] - Tx Pause Mask. When 1 + * indicates that the Tx Pause indication is disabled. When 0 indicates that + * the Tx Pause indication is enabled. [7] - BRB1 Empty Mask. When 1 + * indicates that the BRB1 EMPTY indication is disabled. When 0 indicates + * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1 + * indicates that the QM IDLE indication is disabled. When 0 indicates that + * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9] + * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for + * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for + * LOOPBACK is enabled. [10] - L1 Status Mask. When 1 indicates that the L1 + * Status indication from the PCIE CORE is disabled. When 0 indicates that + * the RX EEE LPI Status indication from the PCIE CORE is enabled. In the + * EXIT Events Masks registers; this bit masks the falling edge detect of + * the L1 status (L1 is on - off). [11] - P0 E0 EEE EEE LPI REQ Mask. When + * =1 indicates that the P0 E0 EEE EEE LPI REQ indication is disabled. When + * =0 indicates that the P0 E0 EEE LPI REQ indication is enabled. [12] - P1 + * E0 EEE LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication + * is disabled. When =0 indicates that the P0 EEE LPI REQ indication is + * enabled. [13] - P0 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE + * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ + * indication is enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates + * that the P0 EEE LPI REQ indication is disabled. When =0 indicates that + * the P0 EEE LPI REQ indication is enabled. [15] - L1 REQ Mask. When =1 + * indicates that the L1 REQ indication is disabled. When =0 indicates that + * the L1 indication is enabled. [16] - Rx EEE LPI Status Edge Detect Mask. + * When =1 indicates that the RX EEE LPI Status Falling Edge Detect + * indication is disabled (Rx EEE LPI is on - off). When =0 indicates that + * the RX EEE LPI Status Falling Edge Detec indication is enabled (Rx EEE + * LPI is on - off). This bit is applicable only in the EXIT Events Masks + * registers. [17] - L1 Status Edge Detect Mask. When =1 indicates that the + * L1 Status Falling Edge Detect indication from the PCIE CORE is disabled + * (L1 is on - off). When =0 indicates that the L1 Status Falling Edge + * Detect indication from the PCIE CORE is enabled (L1 is on - off). This + * bit is applicable only in the EXIT Events Masks registers.Clock 25MHz. + * Reset on hard reset. */ +#define MISC_REG_CPMU_LP_MASK_EXT_P0 0xa888 +/* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number + * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only + * register. Reset on hard reset. */ +#define MISC_REG_CPMU_LP_SM_ENT_CNT_P0 0xa8b8 +/* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number + * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only + * register. Reset on hard reset. */ +#define MISC_REG_CPMU_LP_SM_ENT_CNT_P1 0xa8bc +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_1 0xa510 +#define MISC_REG_DRIVER_CONTROL_7 0xa3c8 +/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0 + only. */ +#define MISC_REG_E1HMF_MODE 0xa5f8 +/* [R 1] Status of four port mode path swap input pin. */ +#define MISC_REG_FOUR_PORT_PATH_SWAP 0xa75c +/* [RW 2] 4 port path swap overwrite.[0] - Overwrite control; if it is 0 - + the path_swap output is equal to 4 port mode path swap input pin; if it + is 1 - the path_swap output is equal to bit[1] of this register; [1] - + Overwrite value. If bit[0] of this register is 1 this is the value that + receives the path_swap output. Reset on Hard reset. */ +#define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR 0xa738 +/* [R 1] Status of 4 port mode port swap input pin. */ +#define MISC_REG_FOUR_PORT_PORT_SWAP 0xa754 +/* [RW 2] 4 port port swap overwrite.[0] - Overwrite control; if it is 0 - + the port_swap output is equal to 4 port mode port swap input pin; if it + is 1 - the port_swap output is equal to bit[1] of this register; [1] - + Overwrite value. If bit[0] of this register is 1 this is the value that + receives the port_swap output. Reset on Hard reset. */ +#define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR 0xa734 +/* [RW 32] Debug only: spare RW register reset by core reset */ +#define MISC_REG_GENERIC_CR_0 0xa460 +#define MISC_REG_GENERIC_CR_1 0xa464 +/* [RW 32] Debug only: spare RW register reset by por reset */ +#define MISC_REG_GENERIC_POR_1 0xa474 +/* [RW 32] Bit[0]: EPIO MODE SEL: Setting this bit to 1 will allow SW/FW to + use all of the 32 Extended GPIO pins. Without setting this bit; an EPIO + can not be configured as an output. Each output has its output enable in + the MCP register space; but this bit needs to be set to make use of that. + Bit[3:1] spare. Bit[4]: WCVTMON_PWRDN: Powerdown for Warpcore VTMON. When + set to 1 - Powerdown. Bit[5]: WCVTMON_RESETB: Reset for Warpcore VTMON. + When set to 0 - vTMON is in reset. Bit[6]: setting this bit will change + the i/o to an output and will drive the TimeSync output. Bit[31:7]: + spare. Global register. Reset by hard reset. */ +#define MISC_REG_GEN_PURP_HWG 0xa9a0 +/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of + these bits is written as a '1'; the corresponding SPIO bit will turn off + it's drivers and become an input. This is the reset state of all GPIO + pins. The read value of these bits will be a '1' if that last command + (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff). + [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written + as a '1'; the corresponding GPIO bit will drive low. The read value of + these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for + this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0; + SET When any of these bits is written as a '1'; the corresponding GPIO + bit will drive high (if it has that capability). The read value of these + bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this + bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0; + RO; These bits indicate the read value of each of the eight GPIO pins. + This is the result value of the pin; not the drive value. Writing these + bits will have not effect. */ +#define MISC_REG_GPIO 0xa490 +/* [RW 8] These bits enable the GPIO_INTs to signals event to the + IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2] + p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2; + [7] p1_gpio_3; */ +#define MISC_REG_GPIO_EVENT_EN 0xa2bc +/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a + '1' to these bit clears the corresponding bit in the #OLD_VALUE register. + This will acknowledge an interrupt on the falling edge of corresponding + GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0; + Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE + register. This will acknowledge an interrupt on the rising edge of + corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1; + OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input + value. When the ~INT_STATE bit is set; this bit indicates the OLD value + of the pin such that if ~INT_STATE is set and this bit is '0'; then the + interrupt is due to a low to high edge. If ~INT_STATE is set and this bit + is '1'; then the interrupt is due to a high to low edge (reset value 0). + [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the + current GPIO interrupt state for each GPIO pin. This bit is cleared when + the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is + set when the GPIO input does not match the current value in #OLD_VALUE + (reset value 0). */ +#define MISC_REG_GPIO_INT 0xa494 +/* [R 28] this field hold the last information that caused reserved + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master that caused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_RSV_ATTN 0xa3c0 +/* [R 28] this field hold the last information that caused timeout + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master that caused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4 +/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any + access that does not finish within + ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is + cleared; this timeout is disabled. If this timeout occurs; the GRC shall + assert it attention output. */ +#define MISC_REG_GRC_TIMEOUT_EN 0xa280 +/* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of + the bits is: [2:0] OAC reset value 001) CML output buffer bias control; + 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl + (reset value 001) Charge pump current control; 111 for 720u; 011 for + 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00) + Global bias control; When bit 7 is high bias current will be 10 0gh; When + bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8] + Pll_observe (reset value 010) Bits to control observability. bit 10 is + for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl + (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V + and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning + sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted + internally). [14] reserved (reset value 0) Reset for VCO sequencer is + connected to RESET input directly. [15] capRetry_en (reset value 0) + enable retry on cap search failure (inverted). [16] freqMonitor_e (reset + value 0) bit to continuously monitor vco freq (inverted). [17] + freqDetRestart_en (reset value 0) bit to enable restart when not freq + locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable + retry on freq det failure(inverted). [19] pllForceFdone_en (reset value + 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20] + pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass + (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value + 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0) + bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to + enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force + capPass. [26] capRestart (reset value 0) bit to force cap sequencer to + restart. [27] capSelectM_en (reset value 0) bit to enable cap select + register bits. */ +#define MISC_REG_LCPLL_CTRL_1 0xa2a4 +#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8 +/* [RW 1] LCPLL power down. Global register. Active High. Reset on POR + * reset. */ +#define MISC_REG_LCPLL_E40_PWRDWN 0xaa74 +/* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */ +#define MISC_REG_LCPLL_E40_RESETB_ANA 0xaa78 +/* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR + * reset. */ +#define MISC_REG_LCPLL_E40_RESETB_DIG 0xaa7c +/* [RW 4] Interrupt mask register #0 read/write */ +#define MISC_REG_MISC_INT_MASK 0xa388 +/* [RW 1] Parity mask register #0 read/write */ +#define MISC_REG_MISC_PRTY_MASK 0xa398 +/* [R 1] Parity register #0 read */ +#define MISC_REG_MISC_PRTY_STS 0xa38c +/* [RC 1] Parity register #0 read clear */ +#define MISC_REG_MISC_PRTY_STS_CLR 0xa390 +#define MISC_REG_NIG_WOL_P0 0xa270 +#define MISC_REG_NIG_WOL_P1 0xa274 +/* [R 1] If set indicate that the pcie_rst_b was asserted without perst + assertion */ +#define MISC_REG_PCIE_HOT_RESET 0xa618 +/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. + inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 + divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 + divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2 + divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2 + divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9] + freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1] + (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value + 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16] + Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset + value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value + 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0); + [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25] + Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27] + testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29] + testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31] + testa_en (reset value 0); */ +#define MISC_REG_PLL_STORM_CTRL_1 0xa294 +#define MISC_REG_PLL_STORM_CTRL_2 0xa298 +#define MISC_REG_PLL_STORM_CTRL_3 0xa29c +#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 +/* [R 1] Status of 4 port mode enable input pin. */ +#define MISC_REG_PORT4MODE_EN 0xa750 +/* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 - + * the port4mode_en output is equal to 4 port mode input pin; if it is 1 - + * the port4mode_en output is equal to bit[1] of this register; [1] - + * Overwrite value. If bit[0] of this register is 1 this is the value that + * receives the port4mode_en output . */ +#define MISC_REG_PORT4MODE_EN_OVWR 0xa720 +/* [RW 32] reset reg#2; rite/read one = the specific block is out of reset; + write/read zero = the specific block is in reset; addr 0-wr- the write + value will be written to the register; addr 1-set - one will be written + to all the bits that have the value of one in the data written (bits that + have the value of zero will not be change) ; addr 2-clear - zero will be + written to all the bits that have the value of one in the data written + (bits that have the value of zero will not be change); addr 3-ignore; + read ignore from all addr except addr 00; inside order of the bits is: + [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc; + [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7] + rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn; + [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13] + Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16] + rst_pxp_rq_rd_wr; 31:17] reserved */ +#define MISC_REG_RESET_REG_1 0xa580 +#define MISC_REG_RESET_REG_2 0xa590 +/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is + shared with the driver resides */ +#define MISC_REG_SHARED_MEM_ADDR 0xa2b4 +/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'; + the corresponding SPIO bit will turn off it's drivers and become an + input. This is the reset state of all SPIO pins. The read value of these + bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this + bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits + is written as a '1'; the corresponding SPIO bit will drive low. The read + value of these bits will be a '1' if that last command (#SET; #CLR; or +#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of + these bits is written as a '1'; the corresponding SPIO bit will drive + high (if it has that capability). The read value of these bits will be a + '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET. + (reset value 0). [7-0] VALUE RO; These bits indicate the read value of + each of the eight SPIO pins. This is the result value of the pin; not the + drive value. Writing these bits will have not effect. Each 8 bits field + is divided as follows: [0] VAUX Enable; when pulsed low; enables supply + from VAUX. (This is an output pin only; the FLOAT field is not applicable + for this pin); [1] VAUX Disable; when pulsed low; disables supply form + VAUX. (This is an output pin only; FLOAT field is not applicable for this + pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to + select VAUX supply. (This is an output pin only; it is not controlled by + the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT + field is not applicable for this pin; only the VALUE fields is relevant - + it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6] + Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP + device ID select; read by UMP firmware. */ +#define MISC_REG_SPIO 0xa4fc +/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC. + according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5; + [7:0] reserved */ +#define MISC_REG_SPIO_EVENT_EN 0xa2b8 +/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the + corresponding bit in the #OLD_VALUE register. This will acknowledge an + interrupt on the falling edge of corresponding SPIO input (reset value + 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit + in the #OLD_VALUE register. This will acknowledge an interrupt on the + rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE + RO; These bits indicate the old value of the SPIO input value. When the + ~INT_STATE bit is set; this bit indicates the OLD value of the pin such + that if ~INT_STATE is set and this bit is '0'; then the interrupt is due + to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the + interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE + RO; These bits indicate the current SPIO interrupt state for each SPIO + pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR + command bit is written. This bit is set when the SPIO input does not + match the current value in #OLD_VALUE (reset value 0). */ +#define MISC_REG_SPIO_INT 0xa500 +/* [RW 32] reload value for counter 4 if reload; the value will be reload if + the counter reached zero and the reload bit + (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */ +#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc +/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses + in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 - + timer 8 */ +#define MISC_REG_SW_TIMER_VAL 0xa5c0 +/* [R 1] Status of two port mode path swap input pin. */ +#define MISC_REG_TWO_PORT_PATH_SWAP 0xa758 +/* [RW 2] 2 port swap overwrite.[0] - Overwrite control; if it is 0 - the + path_swap output is equal to 2 port mode path swap input pin; if it is 1 + - the path_swap output is equal to bit[1] of this register; [1] - + Overwrite value. If bit[0] of this register is 1 this is the value that + receives the path_swap output. Reset on Hard reset. */ +#define MISC_REG_TWO_PORT_PATH_SWAP_OVWR 0xa72c +/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are + loaded; 0-prepare; -unprepare */ +#define MISC_REG_UNPREPARED 0xa424 +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) +/* [RW 5] MDIO PHY Address. The WC uses this address to determine whether or + * not it is the recipient of the message on the MDIO interface. The value + * is compared to the value on ctrl_md_devad. Drives output + * misc_xgxs0_phy_addr. Global register. */ +#define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc +#define MISC_REG_WC0_RESET 0xac30 +/* [RW 2] XMAC Core port mode. Indicates the number of ports on the system + side. This should be less than or equal to phy_port_mode; if some of the + ports are not used. This enables reduction of frequency on the core side. + This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - + Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap + input for the XMAC_MP core; and should be changed only while reset is + held low. Reset on Hard reset. */ +#define MISC_REG_XMAC_CORE_PORT_MODE 0xa964 +/* [RW 2] XMAC PHY port mode. Indicates the number of ports on the Warp + Core. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; + 01 - Dual Port Mode; 1x - Quad Port Mode; This is a strap input for the + XMAC_MP core; and should be changed only while reset is held low. Reset + on Hard reset. */ +#define MISC_REG_XMAC_PHY_PORT_MODE 0xa960 +/* [RW 32] 1 [47] Packet Size = 64 Write to this register write bits 31:0. + * Reads from this register will clear bits 31:0. */ +#define MSTAT_REG_RX_STAT_GR64_LO 0x200 +/* [RW 32] 1 [00] Tx Good Packet Count Write to this register write bits + * 31:0. Reads from this register will clear bits 31:0. */ +#define MSTAT_REG_TX_STAT_GTXPOK_LO 0 +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) +#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1<<0) +#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1<<0) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18) +/* [RW 1] Input enable for RX_BMAC0 IF */ +#define NIG_REG_BMAC0_IN_EN 0x100ac +/* [RW 1] output enable for TX_BMAC0 IF */ +#define NIG_REG_BMAC0_OUT_EN 0x100e0 +/* [RW 1] output enable for TX BMAC pause port 0 IF */ +#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110 +/* [RW 1] output enable for RX_BMAC0_REGS IF */ +#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8 +/* [RW 1] output enable for RX BRB1 port0 IF */ +#define NIG_REG_BRB0_OUT_EN 0x100f8 +/* [RW 1] Input enable for TX BRB1 pause port 0 IF */ +#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4 +/* [RW 1] output enable for RX BRB1 port1 IF */ +#define NIG_REG_BRB1_OUT_EN 0x100fc +/* [RW 1] Input enable for TX BRB1 pause port 1 IF */ +#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8 +/* [RW 1] output enable for RX BRB1 LP IF */ +#define NIG_REG_BRB_LB_OUT_EN 0x10100 +/* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] + error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush; + 72:73]-vnic_num; 81:74]-sideband_info */ +#define NIG_REG_DEBUG_PACKET_LB 0x10800 +/* [RW 1] Input enable for TX Debug packet */ +#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc +/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all + packets from PBFare not forwarded to the MAC and just deleted from FIFO. + First packet may be deleted from the middle. And last packet will be + always deleted till the end. */ +#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060 +/* [RW 1] Output enable to EMAC0 */ +#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120 +/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs + to emac for port0; other way to bmac for port0 */ +#define NIG_REG_EGRESS_EMAC0_PORT 0x10058 +/* [RW 1] Input enable for TX PBF user packet port0 IF */ +#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc +/* [RW 1] Input enable for TX PBF user packet port1 IF */ +#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0 +/* [RW 1] Input enable for TX UMP management packet port0 IF */ +#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4 +/* [RW 1] Input enable for RX_EMAC0 IF */ +#define NIG_REG_EMAC0_IN_EN 0x100a4 +/* [RW 1] output enable for TX EMAC pause port 0 IF */ +#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118 +/* [R 1] status from emac0. This bit is set when MDINT from either the + EXT_MDINT pin or from the Copper PHY is driven low. This condition must + be cleared in the attached PHY device that is driving the MINT pin. */ +#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494 +/* [WB 48] This address space contains BMAC0 registers. The BMAC registers + are described in appendix A. In order to access the BMAC0 registers; the + base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be + added to each BMAC register offset */ +#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00 +/* [WB 48] This address space contains BMAC1 registers. The BMAC registers + are described in appendix A. In order to access the BMAC0 registers; the + base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be + added to each BMAC register offset */ +#define NIG_REG_INGRESS_BMAC1_MEM 0x11000 +/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */ +#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0 +/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data + packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */ +#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4 +/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch + logic for interrupts must be used. Enable per bit of interrupt of + ~latch_status.latch_status */ +#define NIG_REG_LATCH_BC_0 0x16210 +/* [RW 27] Latch for each interrupt from Unicore.b[0] + status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete; + b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status; + b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn; + b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete; + b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status; + b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete; + b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet; + b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g; + b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact; + b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx; + b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx; + b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */ +#define NIG_REG_LATCH_STATUS_0 0x18000 +/* [RW 1] led 10g for port 0 */ +#define NIG_REG_LED_10G_P0 0x10320 +/* [RW 1] led 10g for port 1 */ +#define NIG_REG_LED_10G_P1 0x10324 +/* [RW 1] Port0: This bit is set to enable the use of the + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field + defined below. If this bit is cleared; then the blink rate will be about + 8Hz. */ +#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318 +/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for + Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field + is reset to 0x080; giving a default blink period of approximately 8Hz. */ +#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310 +/* [RW 1] Port0: If set along with the + ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0 + bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED + bit; the Traffic LED will blink with the blink rate specified in + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and + ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 + fields. */ +#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308 +/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The + Traffic LED will then be controlled via bit ~nig_registers_ + led_control_traffic_p0.led_control_traffic_p0 and bit + ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */ +#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8 +/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit; + turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also + set; the LED will blink with blink rate specified in + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and + ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 + fields. */ +#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300 +/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; + 9-11PHY7; 12 MAC4; 13-15 PHY10; */ +#define NIG_REG_LED_MODE_P0 0x102f0 +/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1- + tsdm enable; b2- usdm enable */ +#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070 +#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074 +/* [RW 1] SAFC enable for port0. This register may get 1 only when + ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same + port */ +#define NIG_REG_LLFC_ENABLE_0 0x16208 +#define NIG_REG_LLFC_ENABLE_1 0x1620c +/* [RW 16] classes are high-priority for port0 */ +#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058 +#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c +/* [RW 16] classes are low-priority for port0 */ +#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060 +#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064 +/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */ +#define NIG_REG_LLFC_OUT_EN_0 0x160c8 +#define NIG_REG_LLFC_OUT_EN_1 0x160cc +#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c +#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 +#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 +#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048 +/* [RW 1] send to BRB1 if no match on any of RMP rules. */ +#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH0_CLS_TYPE 0x16080 +/* [RW 32] cm header for llh0 */ +#define NIG_REG_LLH0_CM_HEADER 0x1007c +#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc +#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0 +/* [RW 16] destination TCP address 1. The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_TCP_0 0x10220 +/* [RW 16] destination UDP address 1 The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_UDP_0 0x10214 +#define NIG_REG_LLH0_ERROR_MASK 0x1008c +/* [RW 8] event id for llh0 */ +#define NIG_REG_LLH0_EVENT_ID 0x10084 +#define NIG_REG_LLH0_FUNC_EN 0x160fc +#define NIG_REG_LLH0_FUNC_MEM 0x16180 +#define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140 +#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100 +/* [RW 1] Determine the IP version to look for in + ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */ +#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208 +/* [RW 1] t bit for llh0 */ +#define NIG_REG_LLH0_T_BIT 0x10074 +/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */ +#define NIG_REG_LLH0_VLAN_ID_0 0x1022c +/* [RW 8] init credit counter for port0 in LLH */ +#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 +#define NIG_REG_LLH0_XCM_MASK 0x10130 +#define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248 +/* [RW 1] send to BRB1 if no match on any of RMP rules. */ +#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH1_CLS_TYPE 0x16084 +/* [RW 32] cm header for llh1 */ +#define NIG_REG_LLH1_CM_HEADER 0x10080 +#define NIG_REG_LLH1_ERROR_MASK 0x10090 +/* [RW 8] event id for llh1 */ +#define NIG_REG_LLH1_EVENT_ID 0x10088 +#define NIG_REG_LLH1_FUNC_EN 0x16104 +#define NIG_REG_LLH1_FUNC_MEM 0x161c0 +#define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160 +#define NIG_REG_LLH1_FUNC_MEM_SIZE 16 +/* [RW 1] When this bit is set; the LLH will classify the packet before + * sending it to the BRB or calculating WoL on it. This bit controls port 1 + * only. The legacy llh_multi_function_mode bit controls port 0. */ +#define NIG_REG_LLH1_MF_MODE 0x18614 +/* [RW 8] init credit counter for port1 in LLH */ +#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 +#define NIG_REG_LLH1_XCM_MASK 0x10134 +/* [RW 1] When this bit is set; the LLH will expect all packets to be with + e1hov */ +#define NIG_REG_LLH_E1HOV_MODE 0x160d8 +/* [RW 16] Outer VLAN type identifier for multi-function mode. In non + * multi-function mode; it will hold the inner VLAN type. Typically 0x8100. + */ +#define NIG_REG_LLH_E1HOV_TYPE_1 0x16028 +/* [RW 1] When this bit is set; the LLH will classify the packet before + sending it to the BRB or calculating WoL on it. */ +#define NIG_REG_LLH_MF_MODE 0x16024 +#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330 +#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334 +/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */ +#define NIG_REG_NIG_EMAC0_EN 0x1003c +/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */ +#define NIG_REG_NIG_EMAC1_EN 0x10040 +/* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the + EMAC0 to strip the CRC from the ingress packets. */ +#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 +/* [R 32] Interrupt register #0 read */ +#define NIG_REG_NIG_INT_STS_0 0x103b0 +#define NIG_REG_NIG_INT_STS_1 0x103c0 +/* [RC 32] Interrupt register #0 read clear */ +#define NIG_REG_NIG_INT_STS_CLR_0 0x103b4 +/* [R 32] Legacy E1 and E1H location for parity error mask register. */ +#define NIG_REG_NIG_PRTY_MASK 0x103dc +/* [RW 32] Parity mask register #0 read/write */ +#define NIG_REG_NIG_PRTY_MASK_0 0x183c8 +#define NIG_REG_NIG_PRTY_MASK_1 0x183d8 +/* [R 32] Legacy E1 and E1H location for parity error status register. */ +#define NIG_REG_NIG_PRTY_STS 0x103d0 +/* [R 32] Parity register #0 read */ +#define NIG_REG_NIG_PRTY_STS_0 0x183bc +#define NIG_REG_NIG_PRTY_STS_1 0x183cc +/* [R 32] Legacy E1 and E1H location for parity error status clear register. */ +#define NIG_REG_NIG_PRTY_STS_CLR 0x103d4 +/* [RC 32] Parity register #0 read clear */ +#define NIG_REG_NIG_PRTY_STS_CLR_0 0x183c0 +#define NIG_REG_NIG_PRTY_STS_CLR_1 0x183d0 +#define MCPR_IMC_COMMAND_ENABLE (1L<<31) +#define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT 16 +#define MCPR_IMC_COMMAND_OPERATION_BITSHIFT 28 +#define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT 8 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038 +/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in + * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be + * disabled when this bit is set. */ +#define NIG_REG_P0_HWPFC_ENABLE 0x18078 +#define NIG_REG_P0_LLH_FUNC_MEM2 0x18480 +#define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440 +/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. Bits [15:0] return the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Writing a 1 to bit 16 + * will clear the buffer. + */ +#define NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID 0x1875c +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB 0x18754 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB 0x18758 +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P0_LLH_PTP_PARAM_MASK 0x187a0 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. Note that rules 0-3 are for IPv4 + * packets only and require that the packet is IPv4 for the rules to match. + * Note that rules 4-7 are for IPv6 packets only and require that the packet + * is IPv6 for the rules to match. + */ +#define NIG_REG_P0_LLH_PTP_RULE_MASK 0x187a4 +/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */ +#define NIG_REG_P0_LLH_PTP_TO_HOST 0x187ac +/* [RW 1] Input enable for RX MAC interface. */ +#define NIG_REG_P0_MAC_IN_EN 0x185ac +/* [RW 1] Output enable for TX MAC interface */ +#define NIG_REG_P0_MAC_OUT_EN 0x185b0 +/* [RW 1] Output enable for TX PAUSE signal to the MAC. */ +#define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4 +/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for + * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit + * priority field is extracted from the outer-most VLAN in receive packet. + * Only COS 0 and COS 1 are supported in E2. */ +#define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054 +/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits + * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables + * V1 frame format in timesync event detection on RX side. Bit 2 enables V2 + * frame format in timesync event detection on RX side. Bit 3 enables + * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event + * detection on TX side. Bit 5 enables V2 frame format in timesync event + * detection on TX side. Note that for HW to detect PTP packet and extract + * data from the packet, at least one of the version bits of that traffic + * direction has to be enabled. + */ +#define NIG_REG_P0_PTP_EN 0x18788 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A + * priority is mapped to COS 0 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A + * priority is mapped to COS 1 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A + * priority is mapped to COS 2 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS2_PRIORITY_MASK 0x186b0 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 3. A + * priority is mapped to COS 3 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS3_PRIORITY_MASK 0x186b4 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 4. A + * priority is mapped to COS 4 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS4_PRIORITY_MASK 0x186b8 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 5. A + * priority is mapped to COS 5 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS5_PRIORITY_MASK 0x186bc +/* [R 1] RX FIFO for receiving data from MAC is empty. */ +/* [RW 15] Specify which of the credit registers the client is to be mapped + * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For + * clients that are not subject to WFQ credit blocking - their + * specifications here are not used. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0 +/* [RW 32] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x18688 +/* [RW 4] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x1868c +/* [RW 5] Specify whether the client competes directly in the strict + * priority arbiter. The bits are mapped according to client ID (client IDs + * are defined in tx_arb_priority_client). Default value is set to enable + * strict priorities for clients 0-2 -- management and debug traffic. */ +#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8 +/* [RW 5] Specify whether the client is subject to WFQ credit blocking. The + * bits are mapped according to client ID (client IDs are defined in + * tx_arb_priority_client). Default value is 0 for not using WFQ credit + * blocking. */ +#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec +/* [RW 32] Specify the upper bound that credit register 0 is allowed to + * reach. */ +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 0x18114 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 0x18118 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 0x1811c +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 0x186a0 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 0x186a4 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 0x186a8 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 0x186ac +/* [RW 32] Specify the weight (in bytes) to be added to credit register 0 + * when it is time to increment. */ +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 0x18100 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 0x18104 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 0x18108 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 0x18690 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 0x18694 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 0x18698 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 0x1869c +/* [RW 12] Specify the number of strict priority arbitration slots between + * two round-robin arbitration slots to avoid starvation. A value of 0 means + * no strict priority cycles - the strict priority with anti-starvation + * arbiter becomes a round-robin arbiter. */ +#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4 +/* [RW 15] Specify the client number to be assigned to each priority of the + * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0] + * are for priority 0 client; bits [14:12] are for priority 4 client. The + * clients are assigned the following IDs: 0-management; 1-debug traffic + * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 + * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000) + * for management at priority 0; debug traffic at priorities 1 and 2; COS0 + * traffic at priority 3; and COS1 traffic at priority 4. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c +#define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0 +#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460a +/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. Bits [15:0] return the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Writing a 1 to bit 16 + * will clear the buffer. + */ +#define NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID 0x18774 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB 0x1876c +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * the host. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB 0x18770 +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P1_LLH_PTP_PARAM_MASK 0x187c8 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. Note that rules 0-3 are for IPv4 + * packets only and require that the packet is IPv4 for the rules to match. + * Note that rules 4-7 are for IPv6 packets only and require that the packet + * is IPv6 for the rules to match. + */ +#define NIG_REG_P1_LLH_PTP_RULE_MASK 0x187cc +/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */ +#define NIG_REG_P1_LLH_PTP_TO_HOST 0x187d4 +/* [RW 32] Specify the client number to be assigned to each priority of the + * strict priority arbiter. This register specifies bits 31:0 of the 36-bit + * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + * client; bits [35-32] are for priority 8 client. The clients are assigned + * the following IDs: 0-management; 1-debug traffic from this port; 2-debug + * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + * accommodate the 9 input clients to ETS arbiter. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB 0x18680 +/* [RW 4] Specify the client number to be assigned to each priority of the + * strict priority arbiter. This register specifies bits 35:32 of the 36-bit + * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + * client; bits [35-32] are for priority 8 client. The clients are assigned + * the following IDs: 0-management; 1-debug traffic from this port; 2-debug + * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + * accommodate the 9 input clients to ETS arbiter. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684 +/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP + * packets to BRB LB interface to forward the packet to the host. All + * packets from MCP are forwarded to the network when this bit is cleared - + * regardless of the configured destination in tx_mng_destination register. + * When MCP-to-host paths for both ports 0 and 1 are disabled - the arbiter + * for BRB LB interface is bypassed and PBF LB traffic is always selected to + * send to BRB LB. + */ +#define NIG_REG_P0_TX_MNG_HOST_ENABLE 0x182f4 +#define NIG_REG_P1_HWPFC_ENABLE 0x181d0 +#define NIG_REG_P1_MAC_IN_EN 0x185c0 +/* [RW 1] Output enable for TX MAC interface */ +#define NIG_REG_P1_MAC_OUT_EN 0x185c4 +/* [RW 1] Output enable for TX PAUSE signal to the MAC. */ +#define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8 +/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for + * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit + * priority field is extracted from the outer-most VLAN in receive packet. + * Only COS 0 and COS 1 are supported in E2. */ +#define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8 +/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits + * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables + * V1 frame format in timesync event detection on RX side. Bit 2 enables V2 + * frame format in timesync event detection on RX side. Bit 3 enables + * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event + * detection on TX side. Bit 5 enables V2 frame format in timesync event + * detection on TX side. Note that for HW to detect PTP packet and extract + * data from the packet, at least one of the version bits of that traffic + * direction has to be enabled. + */ +#define NIG_REG_P1_PTP_EN 0x187b0 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A + * priority is mapped to COS 0 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A + * priority is mapped to COS 1 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A + * priority is mapped to COS 2 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS2_PRIORITY_MASK 0x186f8 +/* [R 1] RX FIFO for receiving data from MAC is empty. */ +#define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c +/* [R 1] TLLH FIFO is empty. */ +#define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338 +/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for + * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Bit 17 indicates that + * the sequence ID is valid and it is waiting for the TX timestamp value. + * Bit 18 indicates whether the timestamp is from a SW request (value of 1) + * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer. + */ +#define NIG_REG_P0_TLLH_PTP_BUF_SEQID 0x187e0 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P0_TLLH_PTP_BUF_TS_LSB 0x187d8 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P0_TLLH_PTP_BUF_TS_MSB 0x187dc +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P0_TLLH_PTP_PARAM_MASK 0x187f0 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. + */ +#define NIG_REG_P0_TLLH_PTP_RULE_MASK 0x187f4 +/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for + * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16 + * indicates the validity of the data in the buffer. Bit 17 indicates that + * the sequence ID is valid and it is waiting for the TX timestamp value. + * Bit 18 indicates whether the timestamp is from a SW request (value of 1) + * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer. + */ +#define NIG_REG_P1_TLLH_PTP_BUF_SEQID 0x187ec +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the lower 32 bits of timestamp value. + */ +#define NIG_REG_P1_TLLH_PTP_BUF_TS_LSB 0x187e4 +/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for + * MCP. This location returns the upper 32 bits of timestamp value. + */ +#define NIG_REG_P1_TLLH_PTP_BUF_TS_MSB 0x187e8 +/* [RW 11] Mask register for the various parameters used in determining PTP + * packet presence. Set each bit to 1 to mask out the particular parameter. + * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of + * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP + * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC + * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of + * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable + * MAC DA 2. The reset default is set to mask out all parameters. + */ +#define NIG_REG_P1_TLLH_PTP_PARAM_MASK 0x187f8 +/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set + * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} . + * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP + * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1; + * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC + * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype + * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset + * default is to mask out all of the rules. + */ +#define NIG_REG_P1_TLLH_PTP_RULE_MASK 0x187fc +/* [RW 32] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. Note also that there are + * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only + * credit registers 0-5 are valid. This register should be configured + * appropriately before enabling WFQ. */ +#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x186e8 +/* [RW 4] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. Note also that there are + * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only + * credit registers 0-5 are valid. This register should be configured + * appropriately before enabling WFQ. */ +#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x186ec +/* [RW 9] Specify whether the client competes directly in the strict + * priority arbiter. The bits are mapped according to client ID (client IDs + * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic + * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 + * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. + * Default value is set to enable strict priorities for all clients. */ +#define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT 0x18234 +/* [RW 9] Specify whether the client is subject to WFQ credit blocking. The + * bits are mapped according to client ID (client IDs are defined in + * tx_arb_priority_client2): 0-management; 1-debug traffic from this port; + * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 + * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is + * 0 for not using WFQ credit blocking. */ +#define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x18238 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 0x18258 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 0x1825c +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 0x18260 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 0x18264 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 0x18268 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 0x186f4 +/* [RW 32] Specify the weight (in bytes) to be added to credit register 0 + * when it is time to increment. */ +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 0x18244 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 0x18248 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 0x1824c +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 0x18250 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 0x18254 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 0x186f0 +/* [RW 12] Specify the number of strict priority arbitration slots between + two round-robin arbitration slots to avoid starvation. A value of 0 means + no strict priority cycles - the strict priority with anti-starvation + arbiter becomes a round-robin arbiter. */ +#define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS 0x18240 +/* [RW 32] Specify the client number to be assigned to each priority of the + strict priority arbiter. This register specifies bits 31:0 of the 36-bit + value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + client; bits [35-32] are for priority 8 client. The clients are assigned + the following IDs: 0-management; 1-debug traffic from this port; 2-debug + traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + accommodate the 9 input clients to ETS arbiter. Note that this register + is the same as the one for port 0, except that port 1 only has COS 0-2 + traffic. There is no traffic for COS 3-5 of port 1. */ +#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB 0x186e0 +/* [RW 4] Specify the client number to be assigned to each priority of the + strict priority arbiter. This register specifies bits 35:32 of the 36-bit + value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + client; bits [35-32] are for priority 8 client. The clients are assigned + the following IDs: 0-management; 1-debug traffic from this port; 2-debug + traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + accommodate the 9 input clients to ETS arbiter. Note that this register + is the same as the one for port 0, except that port 1 only has COS 0-2 + traffic. There is no traffic for COS 3-5 of port 1. */ +#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4 +/* [R 1] TX FIFO for transmitting data to MAC is empty. */ +#define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594 +/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP + * packets to BRB LB interface to forward the packet to the host. All + * packets from MCP are forwarded to the network when this bit is cleared - + * regardless of the configured destination in tx_mng_destination register. + */ +#define NIG_REG_P1_TX_MNG_HOST_ENABLE 0x182f8 +/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets + forwarded to the host. */ +#define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8 +/* [RW 32] Specify the upper bound that credit register 0 is allowed to + * reach. */ +/* [RW 1] Pause enable for port0. This register may get 1 only when + ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same + port */ +#define NIG_REG_PAUSE_ENABLE_0 0x160c0 +#define NIG_REG_PAUSE_ENABLE_1 0x160c4 +/* [RW 1] Input enable for RX PBF LP IF */ +#define NIG_REG_PBF_LB_IN_EN 0x100b4 +/* [RW 1] Value of this register will be transmitted to port swap when + ~nig_registers_strap_override.strap_override =1 */ +#define NIG_REG_PORT_SWAP 0x10394 +/* [RW 1] PPP enable for port0. This register may get 1 only when + * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the + * same port */ +#define NIG_REG_PPP_ENABLE_0 0x160b0 +#define NIG_REG_PPP_ENABLE_1 0x160b4 +/* [RW 1] output enable for RX parser descriptor IF */ +#define NIG_REG_PRS_EOP_OUT_EN 0x10104 +/* [RW 1] Input enable for RX parser request IF */ +#define NIG_REG_PRS_REQ_IN_EN 0x100b8 +/* [RW 5] control to serdes - CL45 DEVAD */ +#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370 +/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c +/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */ +#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374 +/* [R 1] status from serdes0 that inputs to interrupt logic of link status */ +#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578 +/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure + for port0 */ +#define NIG_REG_STAT0_BRB_DISCARD 0x105f0 +/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure + for port0 */ +#define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8 +/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that + between 1024 and 1522 bytes for port0 */ +#define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750 +/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that + between 1523 bytes and above for port0 */ +#define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760 +/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure + for port1 */ +#define NIG_REG_STAT1_BRB_DISCARD 0x10628 +/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that + between 1024 and 1522 bytes for port1 */ +#define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0 +/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that + between 1523 bytes and above for port1 */ +#define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0 +/* [WB_R 64] Rx statistics : User octets received for LP */ +#define NIG_REG_STAT2_BRB_OCTET 0x107e0 +#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 +#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c +/* [RW 1] port swap mux selection. If this register equal to 0 then port + swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then + ort swap is equal to ~nig_registers_port_swap.port_swap */ +#define NIG_REG_STRAP_OVERRIDE 0x10398 +/* [WB 64] Addresses for TimeSync related registers in the timesync + * generator sub-module. + */ +#define NIG_REG_TIMESYNC_GEN_REG 0x18800 +/* [RW 1] output enable for RX_XCM0 IF */ +#define NIG_REG_XCM0_OUT_EN 0x100f0 +/* [RW 1] output enable for RX_XCM1 IF */ +#define NIG_REG_XCM1_OUT_EN 0x100f4 +/* [RW 1] control to xgxs - remote PHY in-band MDIO */ +#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348 +/* [RW 5] control to xgxs - CL45 DEVAD */ +#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c +/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338 +/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */ +#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340 +/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */ +#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680 +/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */ +#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684 +/* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */ +#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8 +/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */ +#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0 +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18 +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */ +#define PBF_REG_COS0_UPPER_BOUND 0x15c05c +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter + * of port 0. */ +#define PBF_REG_COS0_UPPER_BOUND_P0 0x15c2cc +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter + * of port 1. */ +#define PBF_REG_COS0_UPPER_BOUND_P1 0x15c2e4 +/* [RW 31] The weight of COS0 in the ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT 0x15c054 +/* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT_P0 0x15c2a8 +/* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT_P1 0x15c2c0 +/* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */ +#define PBF_REG_COS1_UPPER_BOUND 0x15c060 +/* [RW 31] The weight of COS1 in the ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT 0x15c058 +/* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT_P0 0x15c2ac +/* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT_P1 0x15c2c4 +/* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */ +#define PBF_REG_COS2_WEIGHT_P0 0x15c2b0 +/* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */ +#define PBF_REG_COS2_WEIGHT_P1 0x15c2c8 +/* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */ +#define PBF_REG_COS3_WEIGHT_P0 0x15c2b4 +/* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */ +#define PBF_REG_COS4_WEIGHT_P0 0x15c2b8 +/* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */ +#define PBF_REG_COS5_WEIGHT_P0 0x15c2bc +/* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_CREDIT_LB_Q 0x140338 +/* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_CREDIT_Q0 0x14033c +/* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_CREDIT_Q1 0x140340 +/* [RW 1] Disable processing further tasks from port 0 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c +/* [RW 1] Disable processing further tasks from port 1 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060 +/* [RW 1] Disable processing further tasks from port 4 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c +#define PBF_REG_DISABLE_PF 0x1402e8 +#define PBF_REG_DISABLE_VF 0x1402ec +/* [RW 18] For port 0: For each client that is subject to WFQ (the + * corresponding bit is 1); indicates to which of the credit registers this + * client is mapped. For clients which are not credit blocked; their mapping + * is dont care. */ +#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 0x15c288 +/* [RW 9] For port 1: For each client that is subject to WFQ (the + * corresponding bit is 1); indicates to which of the credit registers this + * client is mapped. For clients which are not credit blocked; their mapping + * is dont care. */ +#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 0x15c28c +/* [RW 6] For port 0: Bit per client to indicate if the client competes in + * the strict priority arbiter directly (corresponding bit = 1); or first + * goes to the RR arbiter (corresponding bit = 0); and then competes in the + * lowest priority in the strict-priority arbiter. */ +#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 0x15c278 +/* [RW 3] For port 1: Bit per client to indicate if the client competes in + * the strict priority arbiter directly (corresponding bit = 1); or first + * goes to the RR arbiter (corresponding bit = 0); and then competes in the + * lowest priority in the strict-priority arbiter. */ +#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 0x15c27c +/* [RW 6] For port 0: Bit per client to indicate if the client is subject to + * WFQ credit blocking (corresponding bit = 1). */ +#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 0x15c280 +/* [RW 3] For port 0: Bit per client to indicate if the client is subject to + * WFQ credit blocking (corresponding bit = 1). */ +#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 0x15c284 +/* [RW 16] For port 0: The number of strict priority arbitration slots + * between 2 RR arbitration slots. A value of 0 means no strict priority + * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR + * arbiter. */ +#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 0x15c2a0 +/* [RW 16] For port 1: The number of strict priority arbitration slots + * between 2 RR arbitration slots. A value of 0 means no strict priority + * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR + * arbiter. */ +#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 0x15c2a4 +/* [RW 18] For port 0: Indicates which client is connected to each priority + * in the strict-priority arbiter. Priority 0 is the highest priority, and + * priority 5 is the lowest; to which the RR output is connected to (this is + * not configurable). */ +#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 0x15c270 +/* [RW 9] For port 1: Indicates which client is connected to each priority + * in the strict-priority arbiter. Priority 0 is the highest priority, and + * priority 5 is the lowest; to which the RR output is connected to (this is + * not configurable). */ +#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 0x15c274 +/* [RW 1] Indicates that ETS is performed between the COSes in the command + * arbiter. If reset strict priority w/ anti-starvation will be performed + * w/o WFQ. */ +#define PBF_REG_ETS_ENABLED 0x15c050 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */ +#define PBF_REG_HDRS_AFTER_TAG_0 0x15c0b8 +/* [R 1] Removed for E3 B0 - Indicates which COS is conncted to the highest + * priority in the command arbiter. */ +#define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c +#define PBF_REG_IF_ENABLE_REG 0x140044 +/* [RW 1] Init bit. When set the initial credits are copied to the credit + registers (except the port credits). Should be set and then reset after + the configuration of the block has ended. */ +#define PBF_REG_INIT 0x140000 +/* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_INIT_CRD_LB_Q 0x15c248 +/* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_INIT_CRD_Q0 0x15c230 +/* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_INIT_CRD_Q1 0x15c234 +/* [RW 1] Init bit for port 0. When set the initial credit of port 0 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P0 0x140004 +/* [RW 1] Init bit for port 1. When set the initial credit of port 1 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P1 0x140008 +/* [RW 1] Init bit for port 4. When set the initial credit of port 4 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P4 0x14000c +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * the LB queue. Reset upon init. */ +#define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q 0x140354 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * queue 0. Reset upon init. */ +#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 0x140358 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * queue 1. Reset upon init. */ +#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 0x14035c +/* [RW 1] Enable for mac interface 0. */ +#define PBF_REG_MAC_IF0_ENABLE 0x140030 +/* [RW 1] Enable for mac interface 1. */ +#define PBF_REG_MAC_IF1_ENABLE 0x140034 +/* [RW 1] Enable for the loopback interface. */ +#define PBF_REG_MAC_LB_ENABLE 0x140040 +/* [RW 6] Bit-map indicating which headers must appear in the packet */ +#define PBF_REG_MUST_HAVE_HDRS 0x15c0c4 +/* [RW 16] The number of strict priority arbitration slots between 2 RR + * arbitration slots. A value of 0 means no strict priority cycles; i.e. the + * strict-priority w/ anti-starvation arbiter is a RR arbiter. */ +#define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064 +/* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause + not suppoterd. */ +#define PBF_REG_P0_ARB_THRSH 0x1400e4 +/* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P0_CREDIT 0x140200 +/* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P0_INIT_CRD 0x1400d0 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * port 0. Reset upon init. */ +#define PBF_REG_P0_INTERNAL_CRD_FREED_CNT 0x140308 +/* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */ +#define PBF_REG_P0_PAUSE_ENABLE 0x140014 +/* [R 8] Removed for E3 B0 - Number of tasks in port 0 task queue. */ +#define PBF_REG_P0_TASK_CNT 0x140204 +/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines + * freed from the task queue of port 0. Reset upon init. */ +#define PBF_REG_P0_TQ_LINES_FREED_CNT 0x1402f0 +/* [R 12] Number of 8 bytes lines occupied in the task queue of port 0. */ +#define PBF_REG_P0_TQ_OCCUPANCY 0x1402fc +/* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port + * buffers in 16 byte lines. */ +#define PBF_REG_P1_CREDIT 0x140208 +/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port + * buffers in 16 byte lines. */ +#define PBF_REG_P1_INIT_CRD 0x1400d4 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * port 1. Reset upon init. */ +#define PBF_REG_P1_INTERNAL_CRD_FREED_CNT 0x14030c +/* [R 8] Removed for E3 B0 - Number of tasks in port 1 task queue. */ +#define PBF_REG_P1_TASK_CNT 0x14020c +/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines + * freed from the task queue of port 1. Reset upon init. */ +#define PBF_REG_P1_TQ_LINES_FREED_CNT 0x1402f4 +/* [R 12] Number of 8 bytes lines occupied in the task queue of port 1. */ +#define PBF_REG_P1_TQ_OCCUPANCY 0x140300 +/* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P4_CREDIT 0x140210 +/* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P4_INIT_CRD 0x1400e0 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * port 4. Reset upon init. */ +#define PBF_REG_P4_INTERNAL_CRD_FREED_CNT 0x140310 +/* [R 8] Removed for E3 B0 - Number of tasks in port 4 task queue. */ +#define PBF_REG_P4_TASK_CNT 0x140214 +/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines + * freed from the task queue of port 4. Reset upon init. */ +#define PBF_REG_P4_TQ_LINES_FREED_CNT 0x1402f8 +/* [R 12] Number of 8 bytes lines occupied in the task queue of port 4. */ +#define PBF_REG_P4_TQ_OCCUPANCY 0x140304 +/* [RW 5] Interrupt mask register #0 read/write */ +#define PBF_REG_PBF_INT_MASK 0x1401d4 +/* [R 5] Interrupt register #0 read */ +#define PBF_REG_PBF_INT_STS 0x1401c8 +/* [RW 20] Parity mask register #0 read/write */ +#define PBF_REG_PBF_PRTY_MASK 0x1401e4 +/* [R 28] Parity register #0 read */ +#define PBF_REG_PBF_PRTY_STS 0x1401d8 +/* [RC 20] Parity register #0 read clear */ +#define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc +/* [RW 16] The Ethernet type value for L2 tag 0 */ +#define PBF_REG_TAG_ETHERTYPE_0 0x15c090 +/* [RW 4] The length of the info field for L2 tag 0. The length is between + * 2B and 14B; in 2B granularity */ +#define PBF_REG_TAG_LEN_0 0x15c09c +/* [R 32] Cyclic counter for number of 8 byte lines freed from the LB task + * queue. Reset upon init. */ +#define PBF_REG_TQ_LINES_FREED_CNT_LB_Q 0x14038c +/* [R 32] Cyclic counter for number of 8 byte lines freed from the task + * queue 0. Reset upon init. */ +#define PBF_REG_TQ_LINES_FREED_CNT_Q0 0x140390 +/* [R 32] Cyclic counter for number of 8 byte lines freed from task queue 1. + * Reset upon init. */ +#define PBF_REG_TQ_LINES_FREED_CNT_Q1 0x140394 +/* [R 13] Number of 8 bytes lines occupied in the task queue of the LB + * queue. */ +#define PBF_REG_TQ_OCCUPANCY_LB_Q 0x1403a8 +/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 0. */ +#define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac +/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */ +#define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0 +/* [RW 16] One of 8 values that should be compared to type in Ethernet + * parsing. If there is a match; the field after Ethernet is the first VLAN. + * Reset value is 0x8100 which is the standard VLAN type. Note that when + * checking second VLAN; type is compared only to 0x8100. + */ +#define PBF_REG_VLAN_TYPE_0 0x15c06c +/* [RW 2] Interrupt mask register #0 read/write */ +#define PB_REG_PB_INT_MASK 0x28 +/* [R 2] Interrupt register #0 read */ +#define PB_REG_PB_INT_STS 0x1c +/* [RW 4] Parity mask register #0 read/write */ +#define PB_REG_PB_PRTY_MASK 0x38 +/* [R 4] Parity register #0 read */ +#define PB_REG_PB_PRTY_STS 0x2c +/* [RC 4] Parity register #0 read clear */ +#define PB_REG_PB_PRTY_STS_CLR 0x30 +#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8) +#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1) +#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1<<6) +#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1<<7) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1<<4) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1<<3) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1<<5) +#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1<<2) +/* [R 8] Config space A attention dirty bits. Each bit indicates that the + * corresponding PF generates config space A attention. Set by PXP. Reset by + * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010 +/* [R 8] Config space B attention dirty bits. Each bit indicates that the + * corresponding PF generates config space B attention. Set by PXP. Reset by + * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014 +/* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE 0x9194 +/* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask; + * its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */ +#define PGLUE_B_REG_CSDM_INB_INT_B_VF 0x916c +/* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE 0x919c +/* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_START_OFFSET_A 0x9100 +/* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_START_OFFSET_B 0x9108 +/* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_VF_SHIFT_B 0x9110 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF 0x91ac +/* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates + * that the FLR register of the corresponding PF was set. Set by PXP. Reset + * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028 +/* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1 + * to a bit in this register in order to clear the corresponding bit in + * flr_request_pf_7_0 register. Note: register contains bits from both + * paths. */ +#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418 +/* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024 +/* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018 +/* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c +/* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020 +/* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit + * 0 - Target memory read arrived with a correctable error. Bit 1 - Target + * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW + * arrived with a correctable error. Bit 3 - Configuration RW arrived with + * an uncorrectable error. Bit 4 - Completion with Configuration Request + * Retry Status. Bit 5 - Expansion ROM access received with a write request. + * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and + * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010; + * and pcie_rx_last not asserted. */ +#define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068 +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430 +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE 0x9434 +#define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438 +/* [W 7] Writing 1 to each bit in this register clears a corresponding error + * details register and enables logging new error details. Bit 0 - clears + * INCORRECT_RCV_DETAILS; Bit 1 - clears RX_ERR_DETAILS; Bit 2 - clears + * TX_ERR_WR_ADD_31_0 TX_ERR_WR_ADD_63_32 TX_ERR_WR_DETAILS + * TX_ERR_WR_DETAILS2 TX_ERR_RD_ADD_31_0 TX_ERR_RD_ADD_63_32 + * TX_ERR_RD_DETAILS TX_ERR_RD_DETAILS2 TX_ERR_WR_DETAILS_ICPL; Bit 3 - + * clears VF_LENGTH_VIOLATION_DETAILS. Bit 4 - clears + * VF_GRC_SPACE_VIOLATION_DETAILS. Bit 5 - clears RX_TCPL_ERR_DETAILS. Bit 6 + * - clears TCPL_IN_TWO_RCBS_DETAILS. */ +#define PGLUE_B_REG_LATCHED_ERRORS_CLR 0x943c + +/* [R 9] Interrupt register #0 read */ +#define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298 +/* [RC 9] Interrupt register #0 read clear */ +#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c +/* [RW 2] Parity mask register #0 read/write */ +#define PGLUE_B_REG_PGLUE_B_PRTY_MASK 0x92b4 +/* [R 2] Parity register #0 read */ +#define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8 +/* [RC 2] Parity register #0 read clear */ +#define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR 0x92ac +/* [R 13] Details of first request received with error. [2:0] - PFID. [3] - + * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion + * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 - + * completer abort. 3 - Illegal value for this field. [12] valid - indicates + * if there was a completion error since the last time this register was + * cleared. */ +#define PGLUE_B_REG_RX_ERR_DETAILS 0x9080 +/* [R 18] Details of first ATS Translation Completion request received with + * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code - + * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 - + * unsupported request. 2 - completer abort. 3 - Illegal value for this + * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a + * completion error since the last time this register was cleared. */ +#define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084 +/* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to + * a bit in this register in order to clear the corresponding bit in + * shadow_bme_pf_7_0 register. MCP should never use this unless a + * work-around is needed. Note: register contains bits from both paths. */ +#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458 +/* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the + * VF enable register of the corresponding PF is written to 0 and was + * previously 1. Set by PXP. Reset by MCP writing 1 to + * sr_iov_disabled_request_clr. Note: register contains bits from both + * paths. */ +#define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030 +/* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read + * completion did not return yet. 1 - tag is unused. Same functionality as + * pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */ +#define PGLUE_B_REG_TAGS_63_32 0x9244 +/* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE 0x9170 +/* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_START_OFFSET_A 0x90c4 +/* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_START_OFFSET_B 0x90cc +/* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_VF_SHIFT_B 0x90d4 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF 0x91a0 +/* [R 32] Address [31:0] of first read request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098 +/* [R 32] Address [63:32] of first read request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c +/* [R 31] Details of first read request not submitted due to error. [4:0] + * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request. + * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] - + * VFID. */ +#define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0 +/* [R 26] Details of first read request not submitted due to error. [15:0] + * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - + * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; + * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent + * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - + * indicates if there was a request not submitted due to error since the + * last time this register was cleared. */ +#define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4 +/* [R 32] Address [31:0] of first write request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088 +/* [R 32] Address [63:32] of first write request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c +/* [R 31] Details of first write request not submitted due to error. [4:0] + * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] + * - VFID. */ +#define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090 +/* [R 26] Details of first write request not submitted due to error. [15:0] + * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - + * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; + * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent + * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - + * indicates if there was a request not submitted due to error since the + * last time this register was cleared. */ +#define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094 +/* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask; + * its[4:0]-address relative to start_offset_a. Bits [1:0] can have any + * value (Byte resolution address). */ +#define PGLUE_B_REG_USDM_INB_INT_A_0 0x9128 +#define PGLUE_B_REG_USDM_INB_INT_A_1 0x912c +#define PGLUE_B_REG_USDM_INB_INT_A_2 0x9130 +#define PGLUE_B_REG_USDM_INB_INT_A_3 0x9134 +#define PGLUE_B_REG_USDM_INB_INT_A_4 0x9138 +#define PGLUE_B_REG_USDM_INB_INT_A_5 0x913c +#define PGLUE_B_REG_USDM_INB_INT_A_6 0x9140 +/* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE 0x917c +/* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE 0x9180 +/* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE 0x9184 +/* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_START_OFFSET_A 0x90d8 +/* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_START_OFFSET_B 0x90e0 +/* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_VF_SHIFT_B 0x90e8 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF 0x91a4 +/* [R 26] Details of first target VF request accessing VF GRC space that + * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write. + * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a + * request accessing VF GRC space that failed permission check since the + * last time this register was cleared. Permission checks are: function + * permission; R/W permission; address range permission. */ +#define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234 +/* [R 31] Details of first target VF request with length violation (too many + * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address). + * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30] + * valid - indicates if there was a request with length violation since the + * last time this register was cleared. Length violations: length of more + * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and + * length is more than 1 DW. */ +#define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230 +/* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates + * that there was a completion with uncorrectable error for the + * corresponding PF. Set by PXP. Reset by MCP writing 1 to + * was_error_pf_7_0_clr. */ +#define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c +/* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1 + * to a bit in this register in order to clear the corresponding bit in + * flr_request_pf_7_0 register. */ +#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470 +/* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_127_96_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078 +/* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP + * writes 1 to a bit in this register in order to clear the corresponding + * bit in was_error_vf_127_96 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474 +/* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_31_0_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c +/* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_31_0 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478 +/* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_63_32_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070 +/* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_63_32 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c +/* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_95_64_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074 +/* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_95_64 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480 +/* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE 0x9188 +/* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_START_OFFSET_A 0x90ec +/* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_START_OFFSET_B 0x90f4 +/* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_VF_SHIFT_B 0x90fc +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF 0x91a8 +#define PRS_REG_A_PRSU_20 0x40134 +/* [R 8] debug only: CFC load request current credit. Transaction based. */ +#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 +/* [R 8] debug only: CFC search request current credit. Transaction based. */ +#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168 +/* [RW 6] The initial credit for the search message to the CFC interface. + Credit is transaction based. */ +#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c +/* [RW 24] CID for port 0 if no match */ +#define PRS_REG_CID_PORT_0 0x400fc +/* [RW 32] The CM header for flush message where 'load existed' bit in CFC + load response is reset and packet type is 0. Used in packet start message + to TCM. */ +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0 +/* [RW 32] The CM header for flush message where 'load existed' bit in CFC + load response is set and packet type is 0. Used in packet start message + to TCM. */ +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0 +/* [RW 32] The CM header for a match and packet type 1 for loopback port. + Used in packet start message to TCM. */ +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0 +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4 +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8 +/* [RW 32] The CM header for a match and packet type 0. Used in packet start + message to TCM. */ +#define PRS_REG_CM_HDR_TYPE_0 0x40078 +#define PRS_REG_CM_HDR_TYPE_1 0x4007c +#define PRS_REG_CM_HDR_TYPE_2 0x40080 +#define PRS_REG_CM_HDR_TYPE_3 0x40084 +#define PRS_REG_CM_HDR_TYPE_4 0x40088 +/* [RW 32] The CM header in case there was not a match on the connection */ +#define PRS_REG_CM_NO_MATCH_HDR 0x400b8 +/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */ +#define PRS_REG_E1HOV_MODE 0x401c8 +/* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet + start message to TCM. */ +#define PRS_REG_EVENT_ID_1 0x40054 +#define PRS_REG_EVENT_ID_2 0x40058 +#define PRS_REG_EVENT_ID_3 0x4005c +/* [RW 16] The Ethernet type value for FCoE */ +#define PRS_REG_FCOE_TYPE 0x401d0 +/* [RW 8] Context region for flush packet with packet type 0. Used in CFC + load request message. */ +#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004 +#define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008 +#define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c +#define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010 +#define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014 +#define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018 +#define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c +#define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define PRS_REG_HDRS_AFTER_BASIC 0x40238 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header for port 0 packets. */ +#define PRS_REG_HDRS_AFTER_BASIC_PORT_0 0x40270 +#define PRS_REG_HDRS_AFTER_BASIC_PORT_1 0x40290 +/* [R 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */ +#define PRS_REG_HDRS_AFTER_TAG_0 0x40248 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 for + * port 0 packets */ +#define PRS_REG_HDRS_AFTER_TAG_0_PORT_0 0x40280 +#define PRS_REG_HDRS_AFTER_TAG_0_PORT_1 0x402a0 +/* [RW 4] The increment value to send in the CFC load request message */ +#define PRS_REG_INC_VALUE 0x40048 +/* [RW 6] Bit-map indicating which headers must appear in the packet */ +#define PRS_REG_MUST_HAVE_HDRS 0x40254 +/* [RW 6] Bit-map indicating which headers must appear in the packet for + * port 0 packets */ +#define PRS_REG_MUST_HAVE_HDRS_PORT_0 0x4028c +#define PRS_REG_MUST_HAVE_HDRS_PORT_1 0x402ac +#define PRS_REG_NIC_MODE 0x40138 +/* [RW 8] The 8-bit event ID for cases where there is no match on the + connection. Used in packet start message to TCM. */ +#define PRS_REG_NO_MATCH_EVENT_ID 0x40070 +/* [ST 24] The number of input CFC flush packets */ +#define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128 +/* [ST 32] The number of cycles the Parser halted its operation since it + could not allocate the next serial number */ +#define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130 +/* [ST 24] The number of input packets */ +#define PRS_REG_NUM_OF_PACKETS 0x40124 +/* [ST 24] The number of input transparent flush packets */ +#define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c +/* [RW 8] Context region for received Ethernet packet with a match and + packet type 0. Used in CFC load request message */ +#define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028 +#define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c +#define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030 +#define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034 +#define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038 +#define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c +#define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040 +#define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044 +/* [R 2] debug only: Number of pending requests for CAC on port 0. */ +#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174 +/* [R 2] debug only: Number of pending requests for header parsing. */ +#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170 +/* [R 1] Interrupt register #0 read */ +#define PRS_REG_PRS_INT_STS 0x40188 +/* [RW 8] Parity mask register #0 read/write */ +#define PRS_REG_PRS_PRTY_MASK 0x401a4 +/* [R 8] Parity register #0 read */ +#define PRS_REG_PRS_PRTY_STS 0x40198 +/* [RC 8] Parity register #0 read clear */ +#define PRS_REG_PRS_PRTY_STS_CLR 0x4019c +/* [RW 8] Context region for pure acknowledge packets. Used in CFC load + request message */ +#define PRS_REG_PURE_REGIONS 0x40024 +/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this + serail number was released by SDM but cannot be used because a previous + serial number was not released. */ +#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154 +/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this + serail number was released by SDM but cannot be used because a previous + serial number was not released. */ +#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158 +/* [R 4] debug only: SRC current credit. Transaction based. */ +#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c +/* [RW 16] The Ethernet type value for L2 tag 0 */ +#define PRS_REG_TAG_ETHERTYPE_0 0x401d4 +/* [RW 4] The length of the info field for L2 tag 0. The length is between + * 2B and 14B; in 2B granularity */ +#define PRS_REG_TAG_LEN_0 0x4022c +/* [R 8] debug only: TCM current credit. Cycle based. */ +#define PRS_REG_TCM_CURRENT_CREDIT 0x40160 +/* [R 8] debug only: TSDM current credit. Transaction based. */ +#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c +/* [RW 16] One of 8 values that should be compared to type in Ethernet + * parsing. If there is a match; the field after Ethernet is the first VLAN. + * Reset value is 0x8100 which is the standard VLAN type. Note that when + * checking second VLAN; type is compared only to 0x8100. + */ +#define PRS_REG_VLAN_TYPE_0 0x401a8 +#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1<<23) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1<<24) +#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) +#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) +/* [R 6] Debug only: Number of used entries in the data FIFO */ +#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c +/* [R 7] Debug only: Number of used entries in the header FIFO */ +#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 +#define PXP2_REG_PGL_ADDR_88_F0 0x120534 +/* [R 32] GRC address for configuration access to PCIE config address 0x88. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_88_F1 0x120544 +#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 +/* [R 32] GRC address for configuration access to PCIE config address 0x8c. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_8C_F1 0x120548 +#define PXP2_REG_PGL_ADDR_90_F0 0x12053c +/* [R 32] GRC address for configuration access to PCIE config address 0x90. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_90_F1 0x12054c +#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +/* [R 32] GRC address for configuration access to PCIE config address 0x94. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_94_F1 0x120550 +#define PXP2_REG_PGL_CONTROL0 0x120490 +#define PXP2_REG_PGL_CONTROL1 0x120514 +#define PXP2_REG_PGL_DEBUG 0x120520 +/* [RW 32] third dword data of expansion rom request. this register is + special. reading from it provides a vector outstanding read requests. if + a bit is zero it means that a read request on the corresponding tag did + not finish yet (not all completions have arrived for it) */ +#define PXP2_REG_PGL_EXP_ROM2 0x120808 +/* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4 +#define PXP2_REG_PGL_INT_CSDM_1 0x1204f8 +#define PXP2_REG_PGL_INT_CSDM_2 0x1204fc +#define PXP2_REG_PGL_INT_CSDM_3 0x120500 +#define PXP2_REG_PGL_INT_CSDM_4 0x120504 +#define PXP2_REG_PGL_INT_CSDM_5 0x120508 +#define PXP2_REG_PGL_INT_CSDM_6 0x12050c +#define PXP2_REG_PGL_INT_CSDM_7 0x120510 +/* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_TSDM_0 0x120494 +#define PXP2_REG_PGL_INT_TSDM_1 0x120498 +#define PXP2_REG_PGL_INT_TSDM_2 0x12049c +#define PXP2_REG_PGL_INT_TSDM_3 0x1204a0 +#define PXP2_REG_PGL_INT_TSDM_4 0x1204a4 +#define PXP2_REG_PGL_INT_TSDM_5 0x1204a8 +#define PXP2_REG_PGL_INT_TSDM_6 0x1204ac +#define PXP2_REG_PGL_INT_TSDM_7 0x1204b0 +/* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_USDM_0 0x1204b4 +#define PXP2_REG_PGL_INT_USDM_1 0x1204b8 +#define PXP2_REG_PGL_INT_USDM_2 0x1204bc +#define PXP2_REG_PGL_INT_USDM_3 0x1204c0 +#define PXP2_REG_PGL_INT_USDM_4 0x1204c4 +#define PXP2_REG_PGL_INT_USDM_5 0x1204c8 +#define PXP2_REG_PGL_INT_USDM_6 0x1204cc +#define PXP2_REG_PGL_INT_USDM_7 0x1204d0 +/* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_XSDM_0 0x1204d4 +#define PXP2_REG_PGL_INT_XSDM_1 0x1204d8 +#define PXP2_REG_PGL_INT_XSDM_2 0x1204dc +#define PXP2_REG_PGL_INT_XSDM_3 0x1204e0 +#define PXP2_REG_PGL_INT_XSDM_4 0x1204e4 +#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8 +#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec +#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0 +/* [RW 3] this field allows one function to pretend being another function + when accessing any BAR mapped resource within the device. the value of + the field is the number of the function that will be accessed + effectively. after software write to this bit it must read it in order to + know that the new value is updated */ +#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674 +#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678 +#define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c +#define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680 +#define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684 +#define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688 +#define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c +#define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690 +/* [R 1] this bit indicates that a read request was blocked because of + bus_master_en was deasserted */ +#define PXP2_REG_PGL_READ_BLOCKED 0x120568 +#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8 +/* [R 18] debug only */ +#define PXP2_REG_PGL_TXW_CDTS 0x12052c +/* [R 1] this bit indicates that a write request was blocked because of + bus_master_en was deasserted */ +#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564 +#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0 +#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4 +#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8 +#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4 +#define PXP2_REG_PSWRQ_BW_ADD28 0x120228 +#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8 +#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4 +#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8 +#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc +#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0 +#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c +#define PXP2_REG_PSWRQ_BW_L1 0x1202b0 +#define PXP2_REG_PSWRQ_BW_L10 0x1202d4 +#define PXP2_REG_PSWRQ_BW_L11 0x1202d8 +#define PXP2_REG_PSWRQ_BW_L2 0x1202b4 +#define PXP2_REG_PSWRQ_BW_L28 0x120318 +#define PXP2_REG_PSWRQ_BW_L3 0x1202b8 +#define PXP2_REG_PSWRQ_BW_L6 0x1202c4 +#define PXP2_REG_PSWRQ_BW_L7 0x1202c8 +#define PXP2_REG_PSWRQ_BW_L8 0x1202cc +#define PXP2_REG_PSWRQ_BW_L9 0x1202d0 +#define PXP2_REG_PSWRQ_BW_RD 0x120324 +#define PXP2_REG_PSWRQ_BW_UB1 0x120238 +#define PXP2_REG_PSWRQ_BW_UB10 0x12025c +#define PXP2_REG_PSWRQ_BW_UB11 0x120260 +#define PXP2_REG_PSWRQ_BW_UB2 0x12023c +#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0 +#define PXP2_REG_PSWRQ_BW_UB3 0x120240 +#define PXP2_REG_PSWRQ_BW_UB6 0x12024c +#define PXP2_REG_PSWRQ_BW_UB7 0x120250 +#define PXP2_REG_PSWRQ_BW_UB8 0x120254 +#define PXP2_REG_PSWRQ_BW_UB9 0x120258 +#define PXP2_REG_PSWRQ_BW_WR 0x120328 +#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000 +#define PXP2_REG_PSWRQ_QM0_L2P 0x120038 +#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054 +#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c +#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0 +/* [RW 32] Interrupt mask register #0 read/write */ +#define PXP2_REG_PXP2_INT_MASK_0 0x120578 +/* [R 32] Interrupt register #0 read */ +#define PXP2_REG_PXP2_INT_STS_0 0x12056c +#define PXP2_REG_PXP2_INT_STS_1 0x120608 +/* [RC 32] Interrupt register #0 read clear */ +#define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570 +/* [RW 32] Parity mask register #0 read/write */ +#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 +#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 +/* [R 32] Parity register #0 read */ +#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c +#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c +/* [RC 32] Parity register #0 read clear */ +#define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580 +#define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590 +/* [R 1] Debug only: The 'almost full' indication from each fifo (gives + indication about backpressure) */ +#define PXP2_REG_RD_ALMOST_FULL_0 0x120424 +/* [R 8] Debug only: The blocks counter - number of unused block ids */ +#define PXP2_REG_RD_BLK_CNT 0x120418 +/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer. + Must be bigger than 6. Normally should not be changed. */ +#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c +/* [RW 2] CDU byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404 +/* [RW 1] When '1'; inputs to the PSWRD block are ignored */ +#define PXP2_REG_RD_DISABLE_INPUTS 0x120374 +/* [R 1] PSWRD internal memories initialization is done */ +#define PXP2_REG_RD_INIT_DONE 0x120370 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq10 */ +#define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq11 */ +#define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq17 */ +#define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq18 */ +#define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq19 */ +#define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq22 */ +#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq25 */ +#define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq6 */ +#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq9 */ +#define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c +/* [RW 2] PBF byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4 +/* [R 1] Debug only: Indication if delivery ports are idle */ +#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c +#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420 +/* [RW 2] QM byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8 +/* [R 7] Debug only: The SR counter - number of unused sub request ids */ +#define PXP2_REG_RD_SR_CNT 0x120414 +/* [RW 2] SRC byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400 +/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must + be bigger than 1. Normally should not be changed. */ +#define PXP2_REG_RD_SR_NUM_CFG 0x120408 +/* [RW 1] Signals the PSWRD block to start initializing internal memories */ +#define PXP2_REG_RD_START_INIT 0x12036c +/* [RW 2] TM byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc +/* [RW 10] Bandwidth addition to VQ0 write requests */ +#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc +/* [RW 10] Bandwidth addition to VQ12 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec +/* [RW 10] Bandwidth addition to VQ13 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0 +/* [RW 10] Bandwidth addition to VQ14 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4 +/* [RW 10] Bandwidth addition to VQ15 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8 +/* [RW 10] Bandwidth addition to VQ16 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc +/* [RW 10] Bandwidth addition to VQ17 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD17 0x120200 +/* [RW 10] Bandwidth addition to VQ18 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD18 0x120204 +/* [RW 10] Bandwidth addition to VQ19 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD19 0x120208 +/* [RW 10] Bandwidth addition to VQ20 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c +/* [RW 10] Bandwidth addition to VQ22 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD22 0x120210 +/* [RW 10] Bandwidth addition to VQ23 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD23 0x120214 +/* [RW 10] Bandwidth addition to VQ24 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD24 0x120218 +/* [RW 10] Bandwidth addition to VQ25 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c +/* [RW 10] Bandwidth addition to VQ26 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD26 0x120220 +/* [RW 10] Bandwidth addition to VQ27 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD27 0x120224 +/* [RW 10] Bandwidth addition to VQ4 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc +/* [RW 10] Bandwidth addition to VQ5 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0 +/* [RW 10] Bandwidth Typical L for VQ0 Read requests */ +#define PXP2_REG_RQ_BW_RD_L0 0x1202ac +/* [RW 10] Bandwidth Typical L for VQ12 Read requests */ +#define PXP2_REG_RQ_BW_RD_L12 0x1202dc +/* [RW 10] Bandwidth Typical L for VQ13 Read requests */ +#define PXP2_REG_RQ_BW_RD_L13 0x1202e0 +/* [RW 10] Bandwidth Typical L for VQ14 Read requests */ +#define PXP2_REG_RQ_BW_RD_L14 0x1202e4 +/* [RW 10] Bandwidth Typical L for VQ15 Read requests */ +#define PXP2_REG_RQ_BW_RD_L15 0x1202e8 +/* [RW 10] Bandwidth Typical L for VQ16 Read requests */ +#define PXP2_REG_RQ_BW_RD_L16 0x1202ec +/* [RW 10] Bandwidth Typical L for VQ17 Read requests */ +#define PXP2_REG_RQ_BW_RD_L17 0x1202f0 +/* [RW 10] Bandwidth Typical L for VQ18 Read requests */ +#define PXP2_REG_RQ_BW_RD_L18 0x1202f4 +/* [RW 10] Bandwidth Typical L for VQ19 Read requests */ +#define PXP2_REG_RQ_BW_RD_L19 0x1202f8 +/* [RW 10] Bandwidth Typical L for VQ20 Read requests */ +#define PXP2_REG_RQ_BW_RD_L20 0x1202fc +/* [RW 10] Bandwidth Typical L for VQ22 Read requests */ +#define PXP2_REG_RQ_BW_RD_L22 0x120300 +/* [RW 10] Bandwidth Typical L for VQ23 Read requests */ +#define PXP2_REG_RQ_BW_RD_L23 0x120304 +/* [RW 10] Bandwidth Typical L for VQ24 Read requests */ +#define PXP2_REG_RQ_BW_RD_L24 0x120308 +/* [RW 10] Bandwidth Typical L for VQ25 Read requests */ +#define PXP2_REG_RQ_BW_RD_L25 0x12030c +/* [RW 10] Bandwidth Typical L for VQ26 Read requests */ +#define PXP2_REG_RQ_BW_RD_L26 0x120310 +/* [RW 10] Bandwidth Typical L for VQ27 Read requests */ +#define PXP2_REG_RQ_BW_RD_L27 0x120314 +/* [RW 10] Bandwidth Typical L for VQ4 Read requests */ +#define PXP2_REG_RQ_BW_RD_L4 0x1202bc +/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */ +#define PXP2_REG_RQ_BW_RD_L5 0x1202c0 +/* [RW 7] Bandwidth upper bound for VQ0 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234 +/* [RW 7] Bandwidth upper bound for VQ12 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264 +/* [RW 7] Bandwidth upper bound for VQ13 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268 +/* [RW 7] Bandwidth upper bound for VQ14 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c +/* [RW 7] Bandwidth upper bound for VQ15 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270 +/* [RW 7] Bandwidth upper bound for VQ16 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274 +/* [RW 7] Bandwidth upper bound for VQ17 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278 +/* [RW 7] Bandwidth upper bound for VQ18 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c +/* [RW 7] Bandwidth upper bound for VQ19 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280 +/* [RW 7] Bandwidth upper bound for VQ20 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284 +/* [RW 7] Bandwidth upper bound for VQ22 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288 +/* [RW 7] Bandwidth upper bound for VQ23 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c +/* [RW 7] Bandwidth upper bound for VQ24 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290 +/* [RW 7] Bandwidth upper bound for VQ25 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294 +/* [RW 7] Bandwidth upper bound for VQ26 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298 +/* [RW 7] Bandwidth upper bound for VQ27 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c +/* [RW 7] Bandwidth upper bound for VQ4 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244 +/* [RW 7] Bandwidth upper bound for VQ5 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248 +/* [RW 10] Bandwidth addition to VQ29 write requests */ +#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c +/* [RW 10] Bandwidth addition to VQ30 write requests */ +#define PXP2_REG_RQ_BW_WR_ADD30 0x120230 +/* [RW 10] Bandwidth Typical L for VQ29 Write requests */ +#define PXP2_REG_RQ_BW_WR_L29 0x12031c +/* [RW 10] Bandwidth Typical L for VQ30 Write requests */ +#define PXP2_REG_RQ_BW_WR_L30 0x120320 +/* [RW 7] Bandwidth upper bound for VQ29 */ +#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4 +/* [RW 7] Bandwidth upper bound for VQ30 */ +#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8 +/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */ +#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008 +/* [RW 2] Endian mode for cdu */ +#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0 +#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c +#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620 +/* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_CDU_P_SIZE 0x120018 +/* [R 1] 1' indicates that the requester has finished its internal + configuration */ +#define PXP2_REG_RQ_CFG_DONE 0x1201b4 +/* [RW 2] Endian mode for debug */ +#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4 +/* [RW 1] When '1'; requests will enter input buffers but wont get out + towards the glue */ +#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 +/* [RW 4] Determines alignment of write SRs when a request is split into + * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B + * aligned. 4 - 512B aligned. */ +#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0 +/* [RW 4] Determines alignment of read SRs when a request is split into + * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B + * aligned. 4 - 512B aligned. */ +#define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c +/* [RW 1] when set the new alignment method (E2) will be applied; when reset + * the original alignment method (E1 E1H) will be applied */ +#define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930 +/* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will + be asserted */ +#define PXP2_REG_RQ_ELT_DISABLE 0x12066c +/* [RW 2] Endian mode for hc */ +#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 +/* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back + compatibility needs; Note that different registers are used per mode */ +#define PXP2_REG_RQ_ILT_MODE 0x1205b4 +/* [WB 53] Onchip address table */ +#define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [WB 53] Onchip address table - B0 */ +#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000 +/* [RW 13] Pending read limiter threshold; in Dwords */ +#define PXP2_REG_RQ_PDR_LIMIT 0x12033c +/* [RW 2] Endian mode for qm */ +#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 +#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634 +#define PXP2_REG_RQ_QM_LAST_ILT 0x120638 +/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_QM_P_SIZE 0x120050 +/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */ +#define PXP2_REG_RQ_RBC_DONE 0x1201b0 +/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS0 0x120160 +/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS1 0x120168 +/* [RW 2] Endian mode for src */ +#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c +#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c +#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640 +/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c +/* [RW 2] Endian mode for tm */ +#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198 +#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644 +#define PXP2_REG_RQ_TM_LAST_ILT 0x120648 +/* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_TM_P_SIZE 0x120034 +/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */ +#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c +/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */ +#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094 +/* [R 8] Number of entries occupied by vq 0 in pswrq memory */ +#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810 +/* [R 8] Number of entries occupied by vq 10 in pswrq memory */ +#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818 +/* [R 8] Number of entries occupied by vq 11 in pswrq memory */ +#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820 +/* [R 8] Number of entries occupied by vq 12 in pswrq memory */ +#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828 +/* [R 8] Number of entries occupied by vq 13 in pswrq memory */ +#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830 +/* [R 8] Number of entries occupied by vq 14 in pswrq memory */ +#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838 +/* [R 8] Number of entries occupied by vq 15 in pswrq memory */ +#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840 +/* [R 8] Number of entries occupied by vq 16 in pswrq memory */ +#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848 +/* [R 8] Number of entries occupied by vq 17 in pswrq memory */ +#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850 +/* [R 8] Number of entries occupied by vq 18 in pswrq memory */ +#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858 +/* [R 8] Number of entries occupied by vq 19 in pswrq memory */ +#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860 +/* [R 8] Number of entries occupied by vq 1 in pswrq memory */ +#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868 +/* [R 8] Number of entries occupied by vq 20 in pswrq memory */ +#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870 +/* [R 8] Number of entries occupied by vq 21 in pswrq memory */ +#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878 +/* [R 8] Number of entries occupied by vq 22 in pswrq memory */ +#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880 +/* [R 8] Number of entries occupied by vq 23 in pswrq memory */ +#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888 +/* [R 8] Number of entries occupied by vq 24 in pswrq memory */ +#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890 +/* [R 8] Number of entries occupied by vq 25 in pswrq memory */ +#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898 +/* [R 8] Number of entries occupied by vq 26 in pswrq memory */ +#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0 +/* [R 8] Number of entries occupied by vq 27 in pswrq memory */ +#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8 +/* [R 8] Number of entries occupied by vq 28 in pswrq memory */ +#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0 +/* [R 8] Number of entries occupied by vq 29 in pswrq memory */ +#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8 +/* [R 8] Number of entries occupied by vq 2 in pswrq memory */ +#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0 +/* [R 8] Number of entries occupied by vq 30 in pswrq memory */ +#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8 +/* [R 8] Number of entries occupied by vq 31 in pswrq memory */ +#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0 +/* [R 8] Number of entries occupied by vq 3 in pswrq memory */ +#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8 +/* [R 8] Number of entries occupied by vq 4 in pswrq memory */ +#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0 +/* [R 8] Number of entries occupied by vq 5 in pswrq memory */ +#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8 +/* [R 8] Number of entries occupied by vq 6 in pswrq memory */ +#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0 +/* [R 8] Number of entries occupied by vq 7 in pswrq memory */ +#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8 +/* [R 8] Number of entries occupied by vq 8 in pswrq memory */ +#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900 +/* [R 8] Number of entries occupied by vq 9 in pswrq memory */ +#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908 +/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS0 0x12015c +/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS1 0x120164 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CDU_MPS 0x1205f0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CSDM_MPS 0x1205d0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DBG_MPS 0x1205e8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DMAE_MPS 0x1205ec +/* [RW 10] if Number of entries in dmae fifo will be higher than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_HC_MPS 0x1205c8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_QM_MPS 0x1205dc +/* [RW 1] 0 - working in A0 mode; - working in B0 mode */ +#define PXP2_REG_WR_REV_MODE 0x120670 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_SRC_MPS 0x1205e4 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TM_MPS 0x1205e0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TSDM_MPS 0x1205d4 +/* [RW 10] if Number of entries in usdmdp fifo will be higher than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_USDMDP_TH 0x120348 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_USDM_MPS 0x1205cc +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_XSDM_MPS 0x1205d8 +/* [R 1] debug only: Indication if PSWHST arbiter is idle */ +#define PXP_REG_HST_ARB_IS_IDLE 0x103004 +/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means + this client is waiting for the arbiter. */ +#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008 +/* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue + block. Should be used for close the gates. */ +#define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4 +/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit + should update according to 'hst_discard_doorbells' register when the state + machine is idle */ +#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0 +/* [RW 1] When 1; new internal writes arriving to the block are discarded. + Should be used for close the gates. */ +#define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8 +/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1' + means this PSWHST is discarding inputs from this client. Each bit should + update according to 'hst_discard_internal_writes' register when the state + machine is idle. */ +#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c +/* [WB 160] Used for initialization of the inbound interrupts memory */ +#define PXP_REG_HST_INBOUND_INT 0x103800 +/* [RW 7] Indirect access to the permission table. The fields are : {Valid; + * VFID[5:0]} + */ +#define PXP_REG_HST_ZONE_PERMISSION_TABLE 0x103400 +/* [RW 32] Interrupt mask register #0 read/write */ +#define PXP_REG_PXP_INT_MASK_0 0x103074 +#define PXP_REG_PXP_INT_MASK_1 0x103084 +/* [R 32] Interrupt register #0 read */ +#define PXP_REG_PXP_INT_STS_0 0x103068 +#define PXP_REG_PXP_INT_STS_1 0x103078 +/* [RC 32] Interrupt register #0 read clear */ +#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c +#define PXP_REG_PXP_INT_STS_CLR_1 0x10307c +/* [RW 27] Parity mask register #0 read/write */ +#define PXP_REG_PXP_PRTY_MASK 0x103094 +/* [R 26] Parity register #0 read */ +#define PXP_REG_PXP_PRTY_STS 0x103088 +/* [RC 27] Parity register #0 read clear */ +#define PXP_REG_PXP_PRTY_STS_CLR 0x10308c +/* [RW 4] The activity counter initial increment value sent in the load + request */ +#define QM_REG_ACTCTRINITVAL_0 0x168040 +#define QM_REG_ACTCTRINITVAL_1 0x168044 +#define QM_REG_ACTCTRINITVAL_2 0x168048 +#define QM_REG_ACTCTRINITVAL_3 0x16804c +/* [RW 32] The base logical address (in bytes) of each physical queue. The + index I represents the physical queue number. The 12 lsbs are ignore and + considered zero so practically there are only 20 bits in this register; + queues 63-0 */ +#define QM_REG_BASEADDR 0x168900 +/* [RW 32] The base logical address (in bytes) of each physical queue. The + index I represents the physical queue number. The 12 lsbs are ignore and + considered zero so practically there are only 20 bits in this register; + queues 127-64 */ +#define QM_REG_BASEADDR_EXT_A 0x16e100 +/* [RW 16] The byte credit cost for each task. This value is for both ports */ +#define QM_REG_BYTECRDCOST 0x168234 +/* [RW 16] The initial byte credit value for both ports. */ +#define QM_REG_BYTECRDINITVAL 0x168238 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 31-0 */ +#define QM_REG_BYTECRDPORT_LSB 0x168228 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 95-64 */ +#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 63-32 */ +#define QM_REG_BYTECRDPORT_MSB 0x168224 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 127-96 */ +#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c +/* [RW 16] The byte credit value that if above the QM is considered almost + full */ +#define QM_REG_BYTECREDITAFULLTHR 0x168094 +/* [RW 4] The initial credit for interface */ +#define QM_REG_CMINITCRD_0 0x1680cc +#define QM_REG_BYTECRDCMDQ_0 0x16e6e8 +#define QM_REG_CMINITCRD_1 0x1680d0 +#define QM_REG_CMINITCRD_2 0x1680d4 +#define QM_REG_CMINITCRD_3 0x1680d8 +#define QM_REG_CMINITCRD_4 0x1680dc +#define QM_REG_CMINITCRD_5 0x1680e0 +#define QM_REG_CMINITCRD_6 0x1680e4 +#define QM_REG_CMINITCRD_7 0x1680e8 +/* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface + is masked */ +#define QM_REG_CMINTEN 0x1680ec +/* [RW 12] A bit vector which indicates which one of the queues are tied to + interface 0 */ +#define QM_REG_CMINTVOQMASK_0 0x1681f4 +#define QM_REG_CMINTVOQMASK_1 0x1681f8 +#define QM_REG_CMINTVOQMASK_2 0x1681fc +#define QM_REG_CMINTVOQMASK_3 0x168200 +#define QM_REG_CMINTVOQMASK_4 0x168204 +#define QM_REG_CMINTVOQMASK_5 0x168208 +#define QM_REG_CMINTVOQMASK_6 0x16820c +#define QM_REG_CMINTVOQMASK_7 0x168210 +/* [RW 20] The number of connections divided by 16 which dictates the size + of each queue which belongs to even function number. */ +#define QM_REG_CONNNUM_0 0x168020 +/* [R 6] Keep the fill level of the fifo from write client 4 */ +#define QM_REG_CQM_WRC_FIFOLVL 0x168018 +/* [RW 8] The context regions sent in the CFC load request */ +#define QM_REG_CTXREG_0 0x168030 +#define QM_REG_CTXREG_1 0x168034 +#define QM_REG_CTXREG_2 0x168038 +#define QM_REG_CTXREG_3 0x16803c +/* [RW 12] The VOQ mask used to select the VOQs which needs to be full for + bypass enable */ +#define QM_REG_ENBYPVOQMASK 0x16823c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 31-0 */ +#define QM_REG_ENBYTECRD_LSB 0x168220 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 95-64 */ +#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 63-32 */ +#define QM_REG_ENBYTECRD_MSB 0x16821c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 127-96 */ +#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514 +/* [RW 4] If cleared then the secondary interface will not be served by the + RR arbiter */ +#define QM_REG_ENSEC 0x1680f0 +/* [RW 32] NA */ +#define QM_REG_FUNCNUMSEL_LSB 0x168230 +/* [RW 32] NA */ +#define QM_REG_FUNCNUMSEL_MSB 0x16822c +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 31:0 */ +#define QM_REG_HWAEMPTYMASK_LSB 0x168218 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 95-64 */ +#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 63:32 */ +#define QM_REG_HWAEMPTYMASK_MSB 0x168214 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 127-96 */ +#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c +/* [RW 4] The number of outstanding request to CFC */ +#define QM_REG_OUTLDREQ 0x168804 +/* [RC 1] A flag to indicate that overflow error occurred in one of the + queues. */ +#define QM_REG_OVFERROR 0x16805c +/* [RC 7] the Q where the overflow occurs */ +#define QM_REG_OVFQNUM 0x168058 +/* [R 16] Pause state for physical queues 15-0 */ +#define QM_REG_PAUSESTATE0 0x168410 +/* [R 16] Pause state for physical queues 31-16 */ +#define QM_REG_PAUSESTATE1 0x168414 +/* [R 16] Pause state for physical queues 47-32 */ +#define QM_REG_PAUSESTATE2 0x16e684 +/* [R 16] Pause state for physical queues 63-48 */ +#define QM_REG_PAUSESTATE3 0x16e688 +/* [R 16] Pause state for physical queues 79-64 */ +#define QM_REG_PAUSESTATE4 0x16e68c +/* [R 16] Pause state for physical queues 95-80 */ +#define QM_REG_PAUSESTATE5 0x16e690 +/* [R 16] Pause state for physical queues 111-96 */ +#define QM_REG_PAUSESTATE6 0x16e694 +/* [R 16] Pause state for physical queues 127-112 */ +#define QM_REG_PAUSESTATE7 0x16e698 +/* [RW 2] The PCI attributes field used in the PCI request. */ +#define QM_REG_PCIREQAT 0x168054 +#define QM_REG_PF_EN 0x16e70c +/* [R 24] The number of tasks stored in the QM for the PF. only even + * functions are valid in E2 (odd I registers will be hard wired to 0) */ +#define QM_REG_PF_USG_CNT_0 0x16e040 +/* [R 16] NOT USED */ +#define QM_REG_PORT0BYTECRD 0x168300 +/* [R 16] The byte credit of port 1 */ +#define QM_REG_PORT1BYTECRD 0x168304 +/* [RW 3] pci function number of queues 15-0 */ +#define QM_REG_PQ2PCIFUNC_0 0x16e6bc +#define QM_REG_PQ2PCIFUNC_1 0x16e6c0 +#define QM_REG_PQ2PCIFUNC_2 0x16e6c4 +#define QM_REG_PQ2PCIFUNC_3 0x16e6c8 +#define QM_REG_PQ2PCIFUNC_4 0x16e6cc +#define QM_REG_PQ2PCIFUNC_5 0x16e6d0 +#define QM_REG_PQ2PCIFUNC_6 0x16e6d4 +#define QM_REG_PQ2PCIFUNC_7 0x16e6d8 +/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL 0x168a00 +/* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL_EXT_A 0x16e200 +/* [RW 2] Interrupt mask register #0 read/write */ +#define QM_REG_QM_INT_MASK 0x168444 +/* [R 2] Interrupt register #0 read */ +#define QM_REG_QM_INT_STS 0x168438 +/* [RW 12] Parity mask register #0 read/write */ +#define QM_REG_QM_PRTY_MASK 0x168454 +/* [R 12] Parity register #0 read */ +#define QM_REG_QM_PRTY_STS 0x168448 +/* [RC 12] Parity register #0 read clear */ +#define QM_REG_QM_PRTY_STS_CLR 0x16844c +/* [R 32] Current queues in pipeline: Queues from 32 to 63 */ +#define QM_REG_QSTATUS_HIGH 0x16802c +/* [R 32] Current queues in pipeline: Queues from 96 to 127 */ +#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408 +/* [R 32] Current queues in pipeline: Queues from 0 to 31 */ +#define QM_REG_QSTATUS_LOW 0x168028 +/* [R 32] Current queues in pipeline: Queues from 64 to 95 */ +#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404 +/* [R 24] The number of tasks queued for each queue; queues 63-0 */ +#define QM_REG_QTASKCTR_0 0x168308 +/* [R 24] The number of tasks queued for each queue; queues 127-64 */ +#define QM_REG_QTASKCTR_EXT_A_0 0x16e584 +/* [RW 4] Queue tied to VOQ */ +#define QM_REG_QVOQIDX_0 0x1680f4 +#define QM_REG_QVOQIDX_10 0x16811c +#define QM_REG_QVOQIDX_100 0x16e49c +#define QM_REG_QVOQIDX_101 0x16e4a0 +#define QM_REG_QVOQIDX_102 0x16e4a4 +#define QM_REG_QVOQIDX_103 0x16e4a8 +#define QM_REG_QVOQIDX_104 0x16e4ac +#define QM_REG_QVOQIDX_105 0x16e4b0 +#define QM_REG_QVOQIDX_106 0x16e4b4 +#define QM_REG_QVOQIDX_107 0x16e4b8 +#define QM_REG_QVOQIDX_108 0x16e4bc +#define QM_REG_QVOQIDX_109 0x16e4c0 +#define QM_REG_QVOQIDX_11 0x168120 +#define QM_REG_QVOQIDX_110 0x16e4c4 +#define QM_REG_QVOQIDX_111 0x16e4c8 +#define QM_REG_QVOQIDX_112 0x16e4cc +#define QM_REG_QVOQIDX_113 0x16e4d0 +#define QM_REG_QVOQIDX_114 0x16e4d4 +#define QM_REG_QVOQIDX_115 0x16e4d8 +#define QM_REG_QVOQIDX_116 0x16e4dc +#define QM_REG_QVOQIDX_117 0x16e4e0 +#define QM_REG_QVOQIDX_118 0x16e4e4 +#define QM_REG_QVOQIDX_119 0x16e4e8 +#define QM_REG_QVOQIDX_12 0x168124 +#define QM_REG_QVOQIDX_120 0x16e4ec +#define QM_REG_QVOQIDX_121 0x16e4f0 +#define QM_REG_QVOQIDX_122 0x16e4f4 +#define QM_REG_QVOQIDX_123 0x16e4f8 +#define QM_REG_QVOQIDX_124 0x16e4fc +#define QM_REG_QVOQIDX_125 0x16e500 +#define QM_REG_QVOQIDX_126 0x16e504 +#define QM_REG_QVOQIDX_127 0x16e508 +#define QM_REG_QVOQIDX_13 0x168128 +#define QM_REG_QVOQIDX_14 0x16812c +#define QM_REG_QVOQIDX_15 0x168130 +#define QM_REG_QVOQIDX_16 0x168134 +#define QM_REG_QVOQIDX_17 0x168138 +#define QM_REG_QVOQIDX_21 0x168148 +#define QM_REG_QVOQIDX_22 0x16814c +#define QM_REG_QVOQIDX_23 0x168150 +#define QM_REG_QVOQIDX_24 0x168154 +#define QM_REG_QVOQIDX_25 0x168158 +#define QM_REG_QVOQIDX_26 0x16815c +#define QM_REG_QVOQIDX_27 0x168160 +#define QM_REG_QVOQIDX_28 0x168164 +#define QM_REG_QVOQIDX_29 0x168168 +#define QM_REG_QVOQIDX_30 0x16816c +#define QM_REG_QVOQIDX_31 0x168170 +#define QM_REG_QVOQIDX_32 0x168174 +#define QM_REG_QVOQIDX_33 0x168178 +#define QM_REG_QVOQIDX_34 0x16817c +#define QM_REG_QVOQIDX_35 0x168180 +#define QM_REG_QVOQIDX_36 0x168184 +#define QM_REG_QVOQIDX_37 0x168188 +#define QM_REG_QVOQIDX_38 0x16818c +#define QM_REG_QVOQIDX_39 0x168190 +#define QM_REG_QVOQIDX_40 0x168194 +#define QM_REG_QVOQIDX_41 0x168198 +#define QM_REG_QVOQIDX_42 0x16819c +#define QM_REG_QVOQIDX_43 0x1681a0 +#define QM_REG_QVOQIDX_44 0x1681a4 +#define QM_REG_QVOQIDX_45 0x1681a8 +#define QM_REG_QVOQIDX_46 0x1681ac +#define QM_REG_QVOQIDX_47 0x1681b0 +#define QM_REG_QVOQIDX_48 0x1681b4 +#define QM_REG_QVOQIDX_49 0x1681b8 +#define QM_REG_QVOQIDX_5 0x168108 +#define QM_REG_QVOQIDX_50 0x1681bc +#define QM_REG_QVOQIDX_51 0x1681c0 +#define QM_REG_QVOQIDX_52 0x1681c4 +#define QM_REG_QVOQIDX_53 0x1681c8 +#define QM_REG_QVOQIDX_54 0x1681cc +#define QM_REG_QVOQIDX_55 0x1681d0 +#define QM_REG_QVOQIDX_56 0x1681d4 +#define QM_REG_QVOQIDX_57 0x1681d8 +#define QM_REG_QVOQIDX_58 0x1681dc +#define QM_REG_QVOQIDX_59 0x1681e0 +#define QM_REG_QVOQIDX_6 0x16810c +#define QM_REG_QVOQIDX_60 0x1681e4 +#define QM_REG_QVOQIDX_61 0x1681e8 +#define QM_REG_QVOQIDX_62 0x1681ec +#define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_64 0x16e40c +#define QM_REG_QVOQIDX_65 0x16e410 +#define QM_REG_QVOQIDX_69 0x16e420 +#define QM_REG_QVOQIDX_7 0x168110 +#define QM_REG_QVOQIDX_70 0x16e424 +#define QM_REG_QVOQIDX_71 0x16e428 +#define QM_REG_QVOQIDX_72 0x16e42c +#define QM_REG_QVOQIDX_73 0x16e430 +#define QM_REG_QVOQIDX_74 0x16e434 +#define QM_REG_QVOQIDX_75 0x16e438 +#define QM_REG_QVOQIDX_76 0x16e43c +#define QM_REG_QVOQIDX_77 0x16e440 +#define QM_REG_QVOQIDX_78 0x16e444 +#define QM_REG_QVOQIDX_79 0x16e448 +#define QM_REG_QVOQIDX_8 0x168114 +#define QM_REG_QVOQIDX_80 0x16e44c +#define QM_REG_QVOQIDX_81 0x16e450 +#define QM_REG_QVOQIDX_85 0x16e460 +#define QM_REG_QVOQIDX_86 0x16e464 +#define QM_REG_QVOQIDX_87 0x16e468 +#define QM_REG_QVOQIDX_88 0x16e46c +#define QM_REG_QVOQIDX_89 0x16e470 +#define QM_REG_QVOQIDX_9 0x168118 +#define QM_REG_QVOQIDX_90 0x16e474 +#define QM_REG_QVOQIDX_91 0x16e478 +#define QM_REG_QVOQIDX_92 0x16e47c +#define QM_REG_QVOQIDX_93 0x16e480 +#define QM_REG_QVOQIDX_94 0x16e484 +#define QM_REG_QVOQIDX_95 0x16e488 +#define QM_REG_QVOQIDX_96 0x16e48c +#define QM_REG_QVOQIDX_97 0x16e490 +#define QM_REG_QVOQIDX_98 0x16e494 +#define QM_REG_QVOQIDX_99 0x16e498 +/* [RW 1] Initialization bit command */ +#define QM_REG_SOFT_RESET 0x168428 +/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */ +#define QM_REG_TASKCRDCOST_0 0x16809c +#define QM_REG_TASKCRDCOST_1 0x1680a0 +#define QM_REG_TASKCRDCOST_2 0x1680a4 +#define QM_REG_TASKCRDCOST_4 0x1680ac +#define QM_REG_TASKCRDCOST_5 0x1680b0 +/* [R 6] Keep the fill level of the fifo from write client 3 */ +#define QM_REG_TQM_WRC_FIFOLVL 0x168010 +/* [R 6] Keep the fill level of the fifo from write client 2 */ +#define QM_REG_UQM_WRC_FIFOLVL 0x168008 +/* [RC 32] Credit update error register */ +#define QM_REG_VOQCRDERRREG 0x168408 +/* [R 16] The credit value for each VOQ */ +#define QM_REG_VOQCREDIT_0 0x1682d0 +#define QM_REG_VOQCREDIT_1 0x1682d4 +#define QM_REG_VOQCREDIT_4 0x1682e0 +/* [RW 16] The credit value that if above the QM is considered almost full */ +#define QM_REG_VOQCREDITAFULLTHR 0x168090 +/* [RW 16] The init and maximum credit for each VoQ */ +#define QM_REG_VOQINITCREDIT_0 0x168060 +#define QM_REG_VOQINITCREDIT_1 0x168064 +#define QM_REG_VOQINITCREDIT_2 0x168068 +#define QM_REG_VOQINITCREDIT_4 0x168070 +#define QM_REG_VOQINITCREDIT_5 0x168074 +/* [RW 1] The port of which VOQ belongs */ +#define QM_REG_VOQPORT_0 0x1682a0 +#define QM_REG_VOQPORT_1 0x1682a4 +#define QM_REG_VOQPORT_2 0x1682a8 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_0_LSB 0x168240 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_0_MSB 0x168244 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_10_LSB 0x168290 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_10_MSB 0x168294 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_11_LSB 0x168298 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_11_MSB 0x16829c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_1_LSB 0x168248 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_1_MSB 0x16824c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_2_LSB 0x168250 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_2_MSB 0x168254 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_3_LSB 0x168258 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_4_LSB 0x168260 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_4_MSB 0x168264 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_5_LSB 0x168268 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_5_MSB 0x16826c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_6_LSB 0x168270 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_6_MSB 0x168274 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_7_LSB 0x168278 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_7_MSB 0x16827c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_8_LSB 0x168280 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_8_MSB 0x168284 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_9_LSB 0x168288 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_0 0x16880c +#define QM_REG_WRRWEIGHTS_1 0x168810 +#define QM_REG_WRRWEIGHTS_10 0x168814 +#define QM_REG_WRRWEIGHTS_11 0x168818 +#define QM_REG_WRRWEIGHTS_12 0x16881c +#define QM_REG_WRRWEIGHTS_13 0x168820 +#define QM_REG_WRRWEIGHTS_14 0x168824 +#define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_19 0x16e00c +#define QM_REG_WRRWEIGHTS_2 0x16882c +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_29 0x16e034 +#define QM_REG_WRRWEIGHTS_3 0x168830 +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_31 0x16e03c +#define QM_REG_WRRWEIGHTS_4 0x168834 +#define QM_REG_WRRWEIGHTS_5 0x168838 +#define QM_REG_WRRWEIGHTS_6 0x16883c +#define QM_REG_WRRWEIGHTS_7 0x168840 +#define QM_REG_WRRWEIGHTS_8 0x168844 +#define QM_REG_WRRWEIGHTS_9 0x168848 +/* [R 6] Keep the fill level of the fifo from write client 1 */ +#define QM_REG_XQM_WRC_FIFOLVL 0x168000 +/* [W 1] reset to parity interrupt */ +#define SEM_FAST_REG_PARITY_RST 0x18840 +#define SRC_REG_COUNTFREE0 0x40500 +/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two + ports. If set the searcher support 8 functions. */ +#define SRC_REG_E1HMF_ENABLE 0x404cc +#define SRC_REG_FIRSTFREE0 0x40510 +#define SRC_REG_KEYRSS0_0 0x40408 +#define SRC_REG_KEYRSS0_7 0x40424 +#define SRC_REG_KEYRSS1_9 0x40454 +#define SRC_REG_KEYSEARCH_0 0x40458 +#define SRC_REG_KEYSEARCH_1 0x4045c +#define SRC_REG_KEYSEARCH_2 0x40460 +#define SRC_REG_KEYSEARCH_3 0x40464 +#define SRC_REG_KEYSEARCH_4 0x40468 +#define SRC_REG_KEYSEARCH_5 0x4046c +#define SRC_REG_KEYSEARCH_6 0x40470 +#define SRC_REG_KEYSEARCH_7 0x40474 +#define SRC_REG_KEYSEARCH_8 0x40478 +#define SRC_REG_KEYSEARCH_9 0x4047c +#define SRC_REG_LASTFREE0 0x40530 +#define SRC_REG_NUMBER_HASH_BITS0 0x40400 +/* [RW 1] Reset internal state machines. */ +#define SRC_REG_SOFT_RST 0x4049c +/* [R 3] Interrupt register #0 read */ +#define SRC_REG_SRC_INT_STS 0x404ac +/* [RW 3] Parity mask register #0 read/write */ +#define SRC_REG_SRC_PRTY_MASK 0x404c8 +/* [R 3] Parity register #0 read */ +#define SRC_REG_SRC_PRTY_STS 0x404bc +/* [RC 3] Parity register #0 read clear */ +#define SRC_REG_SRC_PRTY_STS_CLR 0x404c0 +/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ +#define TCM_REG_CAM_OCCUP 0x5017c +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define TCM_REG_CDU_AG_RD_IFEN 0x50034 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define TCM_REG_CDU_AG_WR_IFEN 0x50030 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define TCM_REG_CDU_SM_RD_IFEN 0x5003c +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define TCM_REG_CDU_SM_WR_IFEN 0x50038 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define TCM_REG_CFC_INIT_CRD 0x50204 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_CP_WEIGHT 0x500c0 +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_CSEM_IFEN 0x5002c +/* [RC 1] Message length mismatch (relative to last indication) at the In#9 + interface. */ +#define TCM_REG_CSEM_LENGTH_MIS 0x50174 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_CSEM_WEIGHT 0x500bc +/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */ +#define TCM_REG_ERR_EVNT_ID 0x500a0 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define TCM_REG_ERR_TCM_HDR 0x5009c +/* [RW 8] The Event ID for Timers expiration. */ +#define TCM_REG_EXPR_EVNT_ID 0x500a4 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define TCM_REG_FIC0_INIT_CRD 0x5020c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define TCM_REG_FIC1_INIT_CRD 0x50210 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr; + ~tcm_registers_gr_ld0_pr.gr_ld0_pr and + ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define TCM_REG_GR_ARB_TYPE 0x50114 +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel is the + compliment of the other 3 groups. */ +#define TCM_REG_GR_LD0_PR 0x5011c +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel is the + compliment of the other 3 groups. */ +#define TCM_REG_GR_LD1_PR 0x50120 +/* [RW 4] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. The double REG-pairs are + used to align to STORM context row size of 128 bits. The offset of these + data in the STORM context is always 0. Index _i stands for the connection + type (one of 16). */ +#define TCM_REG_N_SM_CTX_LD_0 0x50050 +#define TCM_REG_N_SM_CTX_LD_1 0x50054 +#define TCM_REG_N_SM_CTX_LD_2 0x50058 +#define TCM_REG_N_SM_CTX_LD_3 0x5005c +#define TCM_REG_N_SM_CTX_LD_4 0x50060 +#define TCM_REG_N_SM_CTX_LD_5 0x50064 +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_PBF_IFEN 0x50024 +/* [RC 1] Message length mismatch (relative to last indication) at the In#7 + interface. */ +#define TCM_REG_PBF_LENGTH_MIS 0x5016c +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_PBF_WEIGHT 0x500b4 +#define TCM_REG_PHYS_QNUM0_0 0x500e0 +#define TCM_REG_PHYS_QNUM0_1 0x500e4 +#define TCM_REG_PHYS_QNUM1_0 0x500e8 +#define TCM_REG_PHYS_QNUM1_1 0x500ec +#define TCM_REG_PHYS_QNUM2_0 0x500f0 +#define TCM_REG_PHYS_QNUM2_1 0x500f4 +#define TCM_REG_PHYS_QNUM3_0 0x500f8 +#define TCM_REG_PHYS_QNUM3_1 0x500fc +/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_PRS_IFEN 0x50020 +/* [RC 1] Message length mismatch (relative to last indication) at the In#6 + interface. */ +#define TCM_REG_PRS_LENGTH_MIS 0x50168 +/* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_PRS_WEIGHT 0x500b0 +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define TCM_REG_STOP_EVNT_ID 0x500a8 +/* [RC 1] Message length mismatch (relative to last indication) at the STORM + interface. */ +#define TCM_REG_STORM_LENGTH_MIS 0x50160 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_STORM_TCM_IFEN 0x50010 +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_STORM_WEIGHT 0x500ac +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_CFC_IFEN 0x50040 +/* [RW 11] Interrupt mask register #0 read/write */ +#define TCM_REG_TCM_INT_MASK 0x501dc +/* [R 11] Interrupt register #0 read */ +#define TCM_REG_TCM_INT_STS 0x501d0 +/* [RW 27] Parity mask register #0 read/write */ +#define TCM_REG_TCM_PRTY_MASK 0x501ec +/* [R 27] Parity register #0 read */ +#define TCM_REG_TCM_PRTY_STS 0x501e0 +/* [RC 27] Parity register #0 read clear */ +#define TCM_REG_TCM_PRTY_STS_CLR 0x501e4 +/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the input message Reg1WbFlg isn't set. */ +#define TCM_REG_TCM_REG0_SZ 0x500d8 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_STORM0_IFEN 0x50004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_STORM1_IFEN 0x50008 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_TQM_IFEN 0x5000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define TCM_REG_TCM_TQM_USE_Q 0x500d4 +/* [RW 28] The CM header for Timers expiration command. */ +#define TCM_REG_TM_TCM_HDR 0x50098 +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_TM_TCM_IFEN 0x5001c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TM_WEIGHT 0x500d0 +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define TCM_REG_TQM_INIT_CRD 0x5021c +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TQM_P_WEIGHT 0x500c8 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TQM_S_WEIGHT 0x500cc +/* [RW 28] The CM header value for QM request (primary). */ +#define TCM_REG_TQM_TCM_HDR_P 0x50090 +/* [RW 28] The CM header value for QM request (secondary). */ +#define TCM_REG_TQM_TCM_HDR_S 0x50094 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TQM_TCM_IFEN 0x50014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TSDM_IFEN 0x50018 +/* [RC 1] Message length mismatch (relative to last indication) at the SDM + interface. */ +#define TCM_REG_TSDM_LENGTH_MIS 0x50164 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TSDM_WEIGHT 0x500c4 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_USEM_IFEN 0x50028 +/* [RC 1] Message length mismatch (relative to last indication) at the In#8 + interface. */ +#define TCM_REG_USEM_LENGTH_MIS 0x50170 +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_USEM_WEIGHT 0x500b8 +/* [RW 21] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - length of the message; 15:6] - message + pointer; 20:16] - next pointer. */ +#define TCM_REG_XX_DESCR_TABLE 0x50280 +#define TCM_REG_XX_DESCR_TABLE_SIZE 29 +/* [R 6] Use to read the value of XX protection Free counter. */ +#define TCM_REG_XX_FREE 0x50178 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 127.Write writes the initial credit + value; read returns the current value of the credit counter. Must be + initialized to 19 at start-up. */ +#define TCM_REG_XX_INIT_CRD 0x50220 +/* [RW 6] Maximum link list size (messages locked) per connection in the XX + protection. */ +#define TCM_REG_XX_MAX_LL_SZ 0x50044 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~tcm_registers_xx_free.xx_free is read on read. */ +#define TCM_REG_XX_MSG_NUM 0x50224 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define TCM_REG_XX_OVFL_EVNT_ID 0x50048 +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] - + header pointer. */ +#define TCM_REG_XX_TABLE 0x50240 +/* [RW 4] Load value for cfc ac credit cnt. */ +#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208 +/* [RW 4] Load value for cfc cld credit cnt. */ +#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210 +/* [RW 8] Client0 context region. */ +#define TM_REG_CL0_CONT_REGION 0x164030 +/* [RW 8] Client1 context region. */ +#define TM_REG_CL1_CONT_REGION 0x164034 +/* [RW 8] Client2 context region. */ +#define TM_REG_CL2_CONT_REGION 0x164038 +/* [RW 2] Client in High priority client number. */ +#define TM_REG_CLIN_PRIOR0_CLIENT 0x164024 +/* [RW 4] Load value for clout0 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT0_VAL 0x164220 +/* [RW 4] Load value for clout1 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT1_VAL 0x164228 +/* [RW 4] Load value for clout2 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT2_VAL 0x164230 +/* [RW 1] Enable client0 input. */ +#define TM_REG_EN_CL0_INPUT 0x164008 +/* [RW 1] Enable client1 input. */ +#define TM_REG_EN_CL1_INPUT 0x16400c +/* [RW 1] Enable client2 input. */ +#define TM_REG_EN_CL2_INPUT 0x164010 +#define TM_REG_EN_LINEAR0_TIMER 0x164014 +/* [RW 1] Enable real time counter. */ +#define TM_REG_EN_REAL_TIME_CNT 0x1640d8 +/* [RW 1] Enable for Timers state machines. */ +#define TM_REG_EN_TIMERS 0x164000 +/* [RW 4] Load value for expiration credit cnt. CFC max number of + outstanding load requests for timers (expiration) context loading. */ +#define TM_REG_EXP_CRDCNT_VAL 0x164238 +/* [RW 32] Linear0 logic address. */ +#define TM_REG_LIN0_LOGIC_ADDR 0x164240 +/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */ +#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 +/* [ST 16] Linear0 Number of scans counter. */ +#define TM_REG_LIN0_NUM_SCANS 0x1640a0 +/* [WB 64] Linear0 phy address. */ +#define TM_REG_LIN0_PHY_ADDR 0x164270 +/* [RW 1] Linear0 physical address valid. */ +#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248 +#define TM_REG_LIN0_SCAN_ON 0x1640d0 +/* [RW 24] Linear0 array scan timeout. */ +#define TM_REG_LIN0_SCAN_TIME 0x16403c +#define TM_REG_LIN0_VNIC_UC 0x164128 +/* [RW 32] Linear1 logic address. */ +#define TM_REG_LIN1_LOGIC_ADDR 0x164250 +/* [WB 64] Linear1 phy address. */ +#define TM_REG_LIN1_PHY_ADDR 0x164280 +/* [RW 1] Linear1 physical address valid. */ +#define TM_REG_LIN1_PHY_ADDR_VALID 0x164258 +/* [RW 6] Linear timer set_clear fifo threshold. */ +#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070 +/* [RW 2] Load value for pci arbiter credit cnt. */ +#define TM_REG_PCIARB_CRDCNT_VAL 0x164260 +/* [RW 20] The amount of hardware cycles for each timer tick. */ +#define TM_REG_TIMER_TICK_SIZE 0x16401c +/* [RW 8] Timers Context region. */ +#define TM_REG_TM_CONTEXT_REGION 0x164044 +/* [RW 1] Interrupt mask register #0 read/write */ +#define TM_REG_TM_INT_MASK 0x1640fc +/* [R 1] Interrupt register #0 read */ +#define TM_REG_TM_INT_STS 0x1640f0 +/* [RW 7] Parity mask register #0 read/write */ +#define TM_REG_TM_PRTY_MASK 0x16410c +/* [R 7] Parity register #0 read */ +#define TM_REG_TM_PRTY_STS 0x164100 +/* [RC 7] Parity register #0 read clear */ +#define TM_REG_TM_PRTY_STS_CLR 0x164104 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define TSDM_REG_AGG_INT_EVENT_0 0x42038 +#define TSDM_REG_AGG_INT_EVENT_1 0x4203c +#define TSDM_REG_AGG_INT_EVENT_2 0x42040 +#define TSDM_REG_AGG_INT_EVENT_3 0x42044 +#define TSDM_REG_AGG_INT_EVENT_4 0x42048 +/* [RW 1] The T bit for aggregated interrupt 0 */ +#define TSDM_REG_AGG_INT_T_0 0x420b8 +#define TSDM_REG_AGG_INT_T_1 0x420bc +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define TSDM_REG_CFC_RSP_START_ADDR 0x42008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c +/* [RW 16] The maximum value of the completion counter #1 */ +#define TSDM_REG_CMP_COUNTER_MAX1 0x42020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define TSDM_REG_CMP_COUNTER_MAX2 0x42024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define TSDM_REG_CMP_COUNTER_MAX3 0x42028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c +#define TSDM_REG_ENABLE_IN1 0x42238 +#define TSDM_REG_ENABLE_IN2 0x4223c +#define TSDM_REG_ENABLE_OUT1 0x42240 +#define TSDM_REG_ENABLE_OUT2 0x42244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc +/* [ST 32] The number of ACK after placement messages received */ +#define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c +/* [ST 32] The number of packet end messages received from the parser */ +#define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274 +/* [ST 32] The number of requests received from the pxp async if */ +#define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278 +/* [ST 32] The number of commands received in queue 0 */ +#define TSDM_REG_NUM_OF_Q0_CMD 0x42248 +/* [ST 32] The number of commands received in queue 10 */ +#define TSDM_REG_NUM_OF_Q10_CMD 0x4226c +/* [ST 32] The number of commands received in queue 11 */ +#define TSDM_REG_NUM_OF_Q11_CMD 0x42270 +/* [ST 32] The number of commands received in queue 1 */ +#define TSDM_REG_NUM_OF_Q1_CMD 0x4224c +/* [ST 32] The number of commands received in queue 3 */ +#define TSDM_REG_NUM_OF_Q3_CMD 0x42250 +/* [ST 32] The number of commands received in queue 4 */ +#define TSDM_REG_NUM_OF_Q4_CMD 0x42254 +/* [ST 32] The number of commands received in queue 5 */ +#define TSDM_REG_NUM_OF_Q5_CMD 0x42258 +/* [ST 32] The number of commands received in queue 6 */ +#define TSDM_REG_NUM_OF_Q6_CMD 0x4225c +/* [ST 32] The number of commands received in queue 7 */ +#define TSDM_REG_NUM_OF_Q7_CMD 0x42260 +/* [ST 32] The number of commands received in queue 8 */ +#define TSDM_REG_NUM_OF_Q8_CMD 0x42264 +/* [ST 32] The number of commands received in queue 9 */ +#define TSDM_REG_NUM_OF_Q9_CMD 0x42268 +/* [RW 13] The start address in the internal RAM for the packet end message */ +#define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define TSDM_REG_Q_COUNTER_START_ADDR 0x42010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558 +/* [RW 32] Tick for timer counter. Applicable only when + ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define TSDM_REG_TIMER_TICK 0x42000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define TSDM_REG_TSDM_INT_MASK_0 0x4229c +#define TSDM_REG_TSDM_INT_MASK_1 0x422ac +/* [R 32] Interrupt register #0 read */ +#define TSDM_REG_TSDM_INT_STS_0 0x42290 +#define TSDM_REG_TSDM_INT_STS_1 0x422a0 +/* [RW 11] Parity mask register #0 read/write */ +#define TSDM_REG_TSDM_PRTY_MASK 0x422bc +/* [R 11] Parity register #0 read */ +#define TSDM_REG_TSDM_PRTY_STS 0x422b0 +/* [RC 11] Parity register #0 read clear */ +#define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define TSEM_REG_ARB_CYCLE_SIZE 0x180034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define TSEM_REG_ARB_ELEMENT0 0x180020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */ +#define TSEM_REG_ARB_ELEMENT1 0x180024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 + and ~tsem_registers_arb_element1.arb_element1 */ +#define TSEM_REG_ARB_ELEMENT2 0x180028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~tsem_registers_arb_element0.arb_element0 and + ~tsem_registers_arb_element1.arb_element1 and + ~tsem_registers_arb_element2.arb_element2 */ +#define TSEM_REG_ARB_ELEMENT3 0x18002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 + and ~tsem_registers_arb_element1.arb_element1 and + ~tsem_registers_arb_element2.arb_element2 and + ~tsem_registers_arb_element3.arb_element3 */ +#define TSEM_REG_ARB_ELEMENT4 0x180030 +#define TSEM_REG_ENABLE_IN 0x1800a4 +#define TSEM_REG_ENABLE_OUT 0x1800a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define TSEM_REG_FAST_MEMORY 0x1a0000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define TSEM_REG_FIC0_DISABLE 0x180224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define TSEM_REG_FIC1_DISABLE 0x180234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define TSEM_REG_INT_TABLE 0x180400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define TSEM_REG_MSG_NUM_FIC0 0x180000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define TSEM_REG_MSG_NUM_FIC1 0x180004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define TSEM_REG_MSG_NUM_FOC0 0x180008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define TSEM_REG_MSG_NUM_FOC1 0x18000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define TSEM_REG_MSG_NUM_FOC2 0x180010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define TSEM_REG_MSG_NUM_FOC3 0x180014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define TSEM_REG_PAS_DISABLE 0x18024c +/* [WB 128] Debug only. Passive buffer memory */ +#define TSEM_REG_PASSIVE_BUFFER 0x181000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define TSEM_REG_PRAM 0x1c0000 +/* [R 8] Valid sleeping threads indication have bit per thread */ +#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0 +/* [RW 8] List of free threads . There is a bit per thread. */ +#define TSEM_REG_THREADS_LIST 0x1802e4 +/* [RC 32] Parity register #0 read clear */ +#define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118 +#define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define TSEM_REG_TS_0_AS 0x180038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define TSEM_REG_TS_10_AS 0x180060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define TSEM_REG_TS_11_AS 0x180064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define TSEM_REG_TS_12_AS 0x180068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define TSEM_REG_TS_13_AS 0x18006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define TSEM_REG_TS_14_AS 0x180070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define TSEM_REG_TS_15_AS 0x180074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define TSEM_REG_TS_16_AS 0x180078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define TSEM_REG_TS_17_AS 0x18007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define TSEM_REG_TS_18_AS 0x180080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define TSEM_REG_TS_1_AS 0x18003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define TSEM_REG_TS_2_AS 0x180040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define TSEM_REG_TS_3_AS 0x180044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define TSEM_REG_TS_4_AS 0x180048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define TSEM_REG_TS_5_AS 0x18004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define TSEM_REG_TS_6_AS 0x180050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define TSEM_REG_TS_7_AS 0x180054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define TSEM_REG_TS_8_AS 0x180058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define TSEM_REG_TS_9_AS 0x18005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define TSEM_REG_TSEM_INT_MASK_0 0x180100 +#define TSEM_REG_TSEM_INT_MASK_1 0x180110 +/* [R 32] Interrupt register #0 read */ +#define TSEM_REG_TSEM_INT_STS_0 0x1800f4 +#define TSEM_REG_TSEM_INT_STS_1 0x180104 +/* [RW 32] Parity mask register #0 read/write */ +#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 +#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 +/* [R 32] Parity register #0 read */ +#define TSEM_REG_TSEM_PRTY_STS_0 0x180114 +#define TSEM_REG_TSEM_PRTY_STS_1 0x180124 +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define TSEM_REG_VFPF_ERR_NUM 0x180380 +/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits + * [10:8] of the address should be the offset within the accessed LCID + * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 + * LCID100. The RBC address should be 12'ha64. */ +#define UCM_REG_AG_CTX 0xe2000 +/* [R 5] Used to read the XX protection CAM occupancy counter. */ +#define UCM_REG_CAM_OCCUP 0xe0170 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define UCM_REG_CDU_AG_RD_IFEN 0xe0038 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define UCM_REG_CDU_AG_WR_IFEN 0xe0034 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define UCM_REG_CDU_SM_RD_IFEN 0xe0040 +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define UCM_REG_CDU_SM_WR_IFEN 0xe003c +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define UCM_REG_CFC_INIT_CRD 0xe0204 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_CP_WEIGHT 0xe00c4 +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_CSEM_IFEN 0xe0028 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the csem interface is detected. */ +#define UCM_REG_CSEM_LENGTH_MIS 0xe0160 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_CSEM_WEIGHT 0xe00b8 +/* [RW 1] Input dorq Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_DORQ_IFEN 0xe0030 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the dorq interface is detected. */ +#define UCM_REG_DORQ_LENGTH_MIS 0xe0168 +/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_DORQ_WEIGHT 0xe00c0 +/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */ +#define UCM_REG_ERR_EVNT_ID 0xe00a4 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define UCM_REG_ERR_UCM_HDR 0xe00a0 +/* [RW 8] The Event ID for Timers expiration. */ +#define UCM_REG_EXPR_EVNT_ID 0xe00a8 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define UCM_REG_FIC0_INIT_CRD 0xe020c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define UCM_REG_FIC1_INIT_CRD 0xe0210 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr; + ~ucm_registers_gr_ld0_pr.gr_ld0_pr and + ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define UCM_REG_GR_ARB_TYPE 0xe0144 +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel group is + compliment to the others. */ +#define UCM_REG_GR_LD0_PR 0xe014c +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel group is + compliment to the others. */ +#define UCM_REG_GR_LD1_PR 0xe0150 +/* [RW 2] The queue index for invalidate counter flag decision. */ +#define UCM_REG_INV_CFLG_Q 0xe00e4 +/* [RW 5] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. the double REG-pairs are + used in order to align to STORM context row size of 128 bits. The offset + of these data in the STORM context is always 0. Index _i stands for the + connection type (one of 16). */ +#define UCM_REG_N_SM_CTX_LD_0 0xe0054 +#define UCM_REG_N_SM_CTX_LD_1 0xe0058 +#define UCM_REG_N_SM_CTX_LD_2 0xe005c +#define UCM_REG_N_SM_CTX_LD_3 0xe0060 +#define UCM_REG_N_SM_CTX_LD_4 0xe0064 +#define UCM_REG_N_SM_CTX_LD_5 0xe0068 +#define UCM_REG_PHYS_QNUM0_0 0xe0110 +#define UCM_REG_PHYS_QNUM0_1 0xe0114 +#define UCM_REG_PHYS_QNUM1_0 0xe0118 +#define UCM_REG_PHYS_QNUM1_1 0xe011c +#define UCM_REG_PHYS_QNUM2_0 0xe0120 +#define UCM_REG_PHYS_QNUM2_1 0xe0124 +#define UCM_REG_PHYS_QNUM3_0 0xe0128 +#define UCM_REG_PHYS_QNUM3_1 0xe012c +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define UCM_REG_STOP_EVNT_ID 0xe00ac +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the STORM interface is detected. */ +#define UCM_REG_STORM_LENGTH_MIS 0xe0154 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_STORM_UCM_IFEN 0xe0010 +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_STORM_WEIGHT 0xe00b0 +/* [RW 4] Timers output initial credit. Max credit available - 15.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 4 at start-up. */ +#define UCM_REG_TM_INIT_CRD 0xe021c +/* [RW 28] The CM header for Timers expiration command. */ +#define UCM_REG_TM_UCM_HDR 0xe009c +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_TM_UCM_IFEN 0xe001c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_TM_WEIGHT 0xe00d4 +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_TSEM_IFEN 0xe0024 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the tsem interface is detected. */ +#define UCM_REG_TSEM_LENGTH_MIS 0xe015c +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_TSEM_WEIGHT 0xe00b4 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_CFC_IFEN 0xe0044 +/* [RW 11] Interrupt mask register #0 read/write */ +#define UCM_REG_UCM_INT_MASK 0xe01d4 +/* [R 11] Interrupt register #0 read */ +#define UCM_REG_UCM_INT_STS 0xe01c8 +/* [RW 27] Parity mask register #0 read/write */ +#define UCM_REG_UCM_PRTY_MASK 0xe01e4 +/* [R 27] Parity register #0 read */ +#define UCM_REG_UCM_PRTY_STS 0xe01d8 +/* [RC 27] Parity register #0 read clear */ +#define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc +/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the Reg1WbFlg isn't set. */ +#define UCM_REG_UCM_REG0_SZ 0xe00dc +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_STORM0_IFEN 0xe0004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_STORM1_IFEN 0xe0008 +/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_UCM_TM_IFEN 0xe0020 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_UQM_IFEN 0xe000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define UCM_REG_UCM_UQM_USE_Q 0xe00d8 +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define UCM_REG_UQM_INIT_CRD 0xe0220 +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_UQM_P_WEIGHT 0xe00cc +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_UQM_S_WEIGHT 0xe00d0 +/* [RW 28] The CM header value for QM request (primary). */ +#define UCM_REG_UQM_UCM_HDR_P 0xe0094 +/* [RW 28] The CM header value for QM request (secondary). */ +#define UCM_REG_UQM_UCM_HDR_S 0xe0098 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UQM_UCM_IFEN 0xe0014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_USDM_IFEN 0xe0018 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the SDM interface is detected. */ +#define UCM_REG_USDM_LENGTH_MIS 0xe0158 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_USDM_WEIGHT 0xe00c8 +/* [RW 1] Input xsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_XSEM_IFEN 0xe002c +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the xsem interface isdetected. */ +#define UCM_REG_XSEM_LENGTH_MIS 0xe0164 +/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_XSEM_WEIGHT 0xe00bc +/* [RW 20] Indirect access to the descriptor table of the XX protection + mechanism. The fields are:[5:0] - message length; 14:6] - message + pointer; 19:15] - next pointer. */ +#define UCM_REG_XX_DESCR_TABLE 0xe0280 +#define UCM_REG_XX_DESCR_TABLE_SIZE 27 +/* [R 6] Use to read the XX protection Free counter. */ +#define UCM_REG_XX_FREE 0xe016c +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Write writes the initial credit value; read returns the current + value of the credit counter. Must be initialized to 12 at start-up. */ +#define UCM_REG_XX_INIT_CRD 0xe0224 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~ucm_registers_xx_free.xx_free read on read. */ +#define UCM_REG_XX_MSG_NUM 0xe0228 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define UCM_REG_XX_OVFL_EVNT_ID 0xe004c +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] - + header pointer. */ +#define UCM_REG_XX_TABLE 0xe0300 +#define UMAC_COMMAND_CONFIG_REG_HD_ENA (0x1<<10) +#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1<<28) +#define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1<<15) +#define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1<<24) +#define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1<<5) +#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1<<8) +#define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1<<4) +#define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1<<1) +#define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13) +#define UMAC_COMMAND_CONFIG_REG_TX_ENA (0x1<<0) +#define UMAC_REG_COMMAND_CONFIG 0x8 +/* [RW 16] This is the duration for which MAC must wait to go back to ACTIVE + * state from LPI state when it receives packet for transmission. The + * decrement unit is 1 micro-second. */ +#define UMAC_REG_EEE_WAKE_TIMER 0x6c +/* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers + * to bit 17 of the MAC address etc. */ +#define UMAC_REG_MAC_ADDR0 0xc +/* [RW 16] Register Bit 0 refers to Bit 0 of the MAC address; Register Bit 1 + * refers to Bit 1 of the MAC address etc. Bits 16 to 31 are reserved. */ +#define UMAC_REG_MAC_ADDR1 0x10 +/* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive + * logic to check frames. */ +#define UMAC_REG_MAXFR 0x14 +#define UMAC_REG_UMAC_EEE_CTRL 0x64 +#define UMAC_UMAC_EEE_CTRL_REG_EEE_EN (0x1<<3) +/* [RW 8] The event id for aggregated interrupt 0 */ +#define USDM_REG_AGG_INT_EVENT_0 0xc4038 +#define USDM_REG_AGG_INT_EVENT_1 0xc403c +#define USDM_REG_AGG_INT_EVENT_2 0xc4040 +#define USDM_REG_AGG_INT_EVENT_4 0xc4048 +#define USDM_REG_AGG_INT_EVENT_5 0xc404c +#define USDM_REG_AGG_INT_EVENT_6 0xc4050 +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define USDM_REG_AGG_INT_MODE_0 0xc41b8 +#define USDM_REG_AGG_INT_MODE_1 0xc41bc +#define USDM_REG_AGG_INT_MODE_4 0xc41c8 +#define USDM_REG_AGG_INT_MODE_5 0xc41cc +#define USDM_REG_AGG_INT_MODE_6 0xc41d0 +/* [RW 1] The T bit for aggregated interrupt 5 */ +#define USDM_REG_AGG_INT_T_5 0xc40cc +#define USDM_REG_AGG_INT_T_6 0xc40d0 +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define USDM_REG_CFC_RSP_START_ADDR 0xc4008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define USDM_REG_CMP_COUNTER_MAX0 0xc401c +/* [RW 16] The maximum value of the completion counter #1 */ +#define USDM_REG_CMP_COUNTER_MAX1 0xc4020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define USDM_REG_CMP_COUNTER_MAX2 0xc4024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define USDM_REG_CMP_COUNTER_MAX3 0xc4028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c +#define USDM_REG_ENABLE_IN1 0xc4238 +#define USDM_REG_ENABLE_IN2 0xc423c +#define USDM_REG_ENABLE_OUT1 0xc4240 +#define USDM_REG_ENABLE_OUT2 0xc4244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0 +/* [ST 32] The number of ACK after placement messages received */ +#define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280 +/* [ST 32] The number of packet end messages received from the parser */ +#define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278 +/* [ST 32] The number of requests received from the pxp async if */ +#define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c +/* [ST 32] The number of commands received in queue 0 */ +#define USDM_REG_NUM_OF_Q0_CMD 0xc4248 +/* [ST 32] The number of commands received in queue 10 */ +#define USDM_REG_NUM_OF_Q10_CMD 0xc4270 +/* [ST 32] The number of commands received in queue 11 */ +#define USDM_REG_NUM_OF_Q11_CMD 0xc4274 +/* [ST 32] The number of commands received in queue 1 */ +#define USDM_REG_NUM_OF_Q1_CMD 0xc424c +/* [ST 32] The number of commands received in queue 2 */ +#define USDM_REG_NUM_OF_Q2_CMD 0xc4250 +/* [ST 32] The number of commands received in queue 3 */ +#define USDM_REG_NUM_OF_Q3_CMD 0xc4254 +/* [ST 32] The number of commands received in queue 4 */ +#define USDM_REG_NUM_OF_Q4_CMD 0xc4258 +/* [ST 32] The number of commands received in queue 5 */ +#define USDM_REG_NUM_OF_Q5_CMD 0xc425c +/* [ST 32] The number of commands received in queue 6 */ +#define USDM_REG_NUM_OF_Q6_CMD 0xc4260 +/* [ST 32] The number of commands received in queue 7 */ +#define USDM_REG_NUM_OF_Q7_CMD 0xc4264 +/* [ST 32] The number of commands received in queue 8 */ +#define USDM_REG_NUM_OF_Q8_CMD 0xc4268 +/* [ST 32] The number of commands received in queue 9 */ +#define USDM_REG_NUM_OF_Q9_CMD 0xc426c +/* [RW 13] The start address in the internal RAM for the packet end message */ +#define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define USDM_REG_Q_COUNTER_START_ADDR 0xc4010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550 +/* [R 1] parser fifo empty in sdm_sync block */ +#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560 +/* [RW 32] Tick for timer counter. Applicable only when + ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define USDM_REG_TIMER_TICK 0xc4000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define USDM_REG_USDM_INT_MASK_0 0xc42a0 +#define USDM_REG_USDM_INT_MASK_1 0xc42b0 +/* [R 32] Interrupt register #0 read */ +#define USDM_REG_USDM_INT_STS_0 0xc4294 +#define USDM_REG_USDM_INT_STS_1 0xc42a4 +/* [RW 11] Parity mask register #0 read/write */ +#define USDM_REG_USDM_PRTY_MASK 0xc42c0 +/* [R 11] Parity register #0 read */ +#define USDM_REG_USDM_PRTY_STS 0xc42b4 +/* [RC 11] Parity register #0 read clear */ +#define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define USEM_REG_ARB_CYCLE_SIZE 0x300034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define USEM_REG_ARB_ELEMENT0 0x300020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 */ +#define USEM_REG_ARB_ELEMENT1 0x300024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 + and ~usem_registers_arb_element1.arb_element1 */ +#define USEM_REG_ARB_ELEMENT2 0x300028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~usem_registers_arb_element0.arb_element0 and + ~usem_registers_arb_element1.arb_element1 and + ~usem_registers_arb_element2.arb_element2 */ +#define USEM_REG_ARB_ELEMENT3 0x30002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 + and ~usem_registers_arb_element1.arb_element1 and + ~usem_registers_arb_element2.arb_element2 and + ~usem_registers_arb_element3.arb_element3 */ +#define USEM_REG_ARB_ELEMENT4 0x300030 +#define USEM_REG_ENABLE_IN 0x3000a4 +#define USEM_REG_ENABLE_OUT 0x3000a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define USEM_REG_FAST_MEMORY 0x320000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define USEM_REG_FIC0_DISABLE 0x300224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define USEM_REG_FIC1_DISABLE 0x300234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define USEM_REG_INT_TABLE 0x300400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define USEM_REG_MSG_NUM_FIC0 0x300000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define USEM_REG_MSG_NUM_FIC1 0x300004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define USEM_REG_MSG_NUM_FOC0 0x300008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define USEM_REG_MSG_NUM_FOC1 0x30000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define USEM_REG_MSG_NUM_FOC2 0x300010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define USEM_REG_MSG_NUM_FOC3 0x300014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define USEM_REG_PAS_DISABLE 0x30024c +/* [WB 128] Debug only. Passive buffer memory */ +#define USEM_REG_PASSIVE_BUFFER 0x302000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define USEM_REG_PRAM 0x340000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define USEM_REG_SLEEP_THREADS_VALID 0x30026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define USEM_REG_THREADS_LIST 0x3002e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define USEM_REG_TS_0_AS 0x300038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define USEM_REG_TS_10_AS 0x300060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define USEM_REG_TS_11_AS 0x300064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define USEM_REG_TS_12_AS 0x300068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define USEM_REG_TS_13_AS 0x30006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define USEM_REG_TS_14_AS 0x300070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define USEM_REG_TS_15_AS 0x300074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define USEM_REG_TS_16_AS 0x300078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define USEM_REG_TS_17_AS 0x30007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define USEM_REG_TS_18_AS 0x300080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define USEM_REG_TS_1_AS 0x30003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define USEM_REG_TS_2_AS 0x300040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define USEM_REG_TS_3_AS 0x300044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define USEM_REG_TS_4_AS 0x300048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define USEM_REG_TS_5_AS 0x30004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define USEM_REG_TS_6_AS 0x300050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define USEM_REG_TS_7_AS 0x300054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define USEM_REG_TS_8_AS 0x300058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define USEM_REG_TS_9_AS 0x30005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define USEM_REG_USEM_INT_MASK_0 0x300110 +#define USEM_REG_USEM_INT_MASK_1 0x300120 +/* [R 32] Interrupt register #0 read */ +#define USEM_REG_USEM_INT_STS_0 0x300104 +#define USEM_REG_USEM_INT_STS_1 0x300114 +/* [RW 32] Parity mask register #0 read/write */ +#define USEM_REG_USEM_PRTY_MASK_0 0x300130 +#define USEM_REG_USEM_PRTY_MASK_1 0x300140 +/* [R 32] Parity register #0 read */ +#define USEM_REG_USEM_PRTY_STS_0 0x300124 +#define USEM_REG_USEM_PRTY_STS_1 0x300134 +/* [RC 32] Parity register #0 read clear */ +#define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128 +#define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138 +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define USEM_REG_VFPF_ERR_NUM 0x300380 +#define VFC_MEMORIES_RST_REG_CAM_RST (0x1<<0) +#define VFC_MEMORIES_RST_REG_RAM_RST (0x1<<1) +#define VFC_REG_MEMORIES_RST 0x1943c +/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits + * [12:8] of the address should be the offset within the accessed LCID + * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 + * LCID100. The RBC address should be 13'ha64. */ +#define XCM_REG_AG_CTX 0x28000 +/* [RW 2] The queue index for registration on Aux1 counter flag. */ +#define XCM_REG_AUX1_Q 0x20134 +/* [RW 2] Per each decision rule the queue index to register to. */ +#define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0 +/* [R 5] Used to read the XX protection CAM occupancy counter. */ +#define XCM_REG_CAM_OCCUP 0x20244 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define XCM_REG_CDU_AG_RD_IFEN 0x20044 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define XCM_REG_CDU_AG_WR_IFEN 0x20040 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define XCM_REG_CDU_SM_RD_IFEN 0x2004c +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define XCM_REG_CDU_SM_WR_IFEN 0x20048 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define XCM_REG_CFC_INIT_CRD 0x20404 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_CP_WEIGHT 0x200dc +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_CSEM_IFEN 0x20028 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the csem interface. */ +#define XCM_REG_CSEM_LENGTH_MIS 0x20228 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_CSEM_WEIGHT 0x200c4 +/* [RW 1] Input dorq Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_DORQ_IFEN 0x20030 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the dorq interface. */ +#define XCM_REG_DORQ_LENGTH_MIS 0x20230 +/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_DORQ_WEIGHT 0x200cc +/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */ +#define XCM_REG_ERR_EVNT_ID 0x200b0 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define XCM_REG_ERR_XCM_HDR 0x200ac +/* [RW 8] The Event ID for Timers expiration. */ +#define XCM_REG_EXPR_EVNT_ID 0x200b4 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define XCM_REG_FIC0_INIT_CRD 0x2040c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define XCM_REG_FIC1_INIT_CRD 0x20410 +#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118 +#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c +#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108 +#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c +/* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr; + ~xcm_registers_gr_ld0_pr.gr_ld0_pr and + ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define XCM_REG_GR_ARB_TYPE 0x2020c +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Channel group is the + compliment of the other 3 groups. */ +#define XCM_REG_GR_LD0_PR 0x20214 +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Channel group is the + compliment of the other 3 groups. */ +#define XCM_REG_GR_LD1_PR 0x20218 +/* [RW 1] Input nig0 Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_NIG0_IFEN 0x20038 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the nig0 interface. */ +#define XCM_REG_NIG0_LENGTH_MIS 0x20238 +/* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_NIG0_WEIGHT 0x200d4 +/* [RW 1] Input nig1 Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_NIG1_IFEN 0x2003c +/* [RC 1] Set at message length mismatch (relative to last indication) at + the nig1 interface. */ +#define XCM_REG_NIG1_LENGTH_MIS 0x2023c +/* [RW 5] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. The double REG-pairs are + used in order to align to STORM context row size of 128 bits. The offset + of these data in the STORM context is always 0. Index _i stands for the + connection type (one of 16). */ +#define XCM_REG_N_SM_CTX_LD_0 0x20060 +#define XCM_REG_N_SM_CTX_LD_1 0x20064 +#define XCM_REG_N_SM_CTX_LD_2 0x20068 +#define XCM_REG_N_SM_CTX_LD_3 0x2006c +#define XCM_REG_N_SM_CTX_LD_4 0x20070 +#define XCM_REG_N_SM_CTX_LD_5 0x20074 +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_PBF_IFEN 0x20034 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the pbf interface. */ +#define XCM_REG_PBF_LENGTH_MIS 0x20234 +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_PBF_WEIGHT 0x200d0 +#define XCM_REG_PHYS_QNUM3_0 0x20100 +#define XCM_REG_PHYS_QNUM3_1 0x20104 +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define XCM_REG_STOP_EVNT_ID 0x200b8 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the STORM interface. */ +#define XCM_REG_STORM_LENGTH_MIS 0x2021c +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_STORM_WEIGHT 0x200bc +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_STORM_XCM_IFEN 0x20010 +/* [RW 4] Timers output initial credit. Max credit available - 15.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 4 at start-up. */ +#define XCM_REG_TM_INIT_CRD 0x2041c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_TM_WEIGHT 0x200ec +/* [RW 28] The CM header for Timers expiration command. */ +#define XCM_REG_TM_XCM_HDR 0x200a8 +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_TM_XCM_IFEN 0x2001c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_TSEM_IFEN 0x20024 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the tsem interface. */ +#define XCM_REG_TSEM_LENGTH_MIS 0x20224 +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_TSEM_WEIGHT 0x200c0 +/* [RW 2] The queue index for registration on UNA greater NXT decision rule. */ +#define XCM_REG_UNA_GT_NXT_Q 0x20120 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_USEM_IFEN 0x2002c +/* [RC 1] Message length mismatch (relative to last indication) at the usem + interface. */ +#define XCM_REG_USEM_LENGTH_MIS 0x2022c +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_USEM_WEIGHT 0x200c8 +#define XCM_REG_WU_DA_CNT_CMD00 0x201d4 +#define XCM_REG_WU_DA_CNT_CMD01 0x201d8 +#define XCM_REG_WU_DA_CNT_CMD10 0x201dc +#define XCM_REG_WU_DA_CNT_CMD11 0x201e0 +#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4 +#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8 +#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec +#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0 +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4 +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8 +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_CFC_IFEN 0x20050 +/* [RW 14] Interrupt mask register #0 read/write */ +#define XCM_REG_XCM_INT_MASK 0x202b4 +/* [R 14] Interrupt register #0 read */ +#define XCM_REG_XCM_INT_STS 0x202a8 +/* [RW 30] Parity mask register #0 read/write */ +#define XCM_REG_XCM_PRTY_MASK 0x202c4 +/* [R 30] Parity register #0 read */ +#define XCM_REG_XCM_PRTY_STS 0x202b8 +/* [RC 30] Parity register #0 read clear */ +#define XCM_REG_XCM_PRTY_STS_CLR 0x202bc + +/* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the Reg1WbFlg isn't set. */ +#define XCM_REG_XCM_REG0_SZ 0x200f4 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_STORM0_IFEN 0x20004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_STORM1_IFEN 0x20008 +/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_XCM_TM_IFEN 0x20020 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_XQM_IFEN 0x2000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define XCM_REG_XCM_XQM_USE_Q 0x200f0 +/* [RW 4] The value by which CFC updates the activity counter at QM bypass. */ +#define XCM_REG_XQM_BYP_ACT_UPD 0x200fc +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define XCM_REG_XQM_INIT_CRD 0x20420 +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XQM_P_WEIGHT 0x200e4 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XQM_S_WEIGHT 0x200e8 +/* [RW 28] The CM header value for QM request (primary). */ +#define XCM_REG_XQM_XCM_HDR_P 0x200a0 +/* [RW 28] The CM header value for QM request (secondary). */ +#define XCM_REG_XQM_XCM_HDR_S 0x200a4 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XQM_XCM_IFEN 0x20014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XSDM_IFEN 0x20018 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the SDM interface. */ +#define XCM_REG_XSDM_LENGTH_MIS 0x20220 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XSDM_WEIGHT 0x200e0 +/* [RW 17] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - message length; 11:6] - message + pointer; 16:12] - next pointer. */ +#define XCM_REG_XX_DESCR_TABLE 0x20480 +#define XCM_REG_XX_DESCR_TABLE_SIZE 32 +/* [R 6] Used to read the XX protection Free counter. */ +#define XCM_REG_XX_FREE 0x20240 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 3.Write writes the initial credit value; + read returns the current value of the credit counter. Must be initialized + to 2 at start-up. */ +#define XCM_REG_XX_INIT_CRD 0x20424 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~xcm_registers_xx_free.xx_free read on read. */ +#define XCM_REG_XX_MSG_NUM 0x20428 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define XCM_REG_XX_OVFL_EVNT_ID 0x20058 +#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0) +#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1) +#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2) +#define XMAC_CTRL_REG_RX_EN (0x1<<1) +#define XMAC_CTRL_REG_SOFT_RESET (0x1<<6) +#define XMAC_CTRL_REG_TX_EN (0x1<<0) +#define XMAC_CTRL_REG_XLGMII_ALIGN_ENB (0x1<<7) +#define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18) +#define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17) +#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1) +#define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1<<0) +#define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1<<3) +#define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1<<4) +#define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN (0x1<<5) +#define XMAC_REG_CLEAR_RX_LSS_STATUS 0x60 +#define XMAC_REG_CTRL 0 +/* [RW 16] Upper 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC + * packets transmitted by the MAC */ +#define XMAC_REG_CTRL_SA_HI 0x2c +/* [RW 32] Lower 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC + * packets transmitted by the MAC */ +#define XMAC_REG_CTRL_SA_LO 0x28 +#define XMAC_REG_EEE_CTRL 0xd8 +#define XMAC_REG_EEE_TIMERS_HI 0xe4 +#define XMAC_REG_PAUSE_CTRL 0x68 +#define XMAC_REG_PFC_CTRL 0x70 +#define XMAC_REG_PFC_CTRL_HI 0x74 +#define XMAC_REG_RX_LSS_CTRL 0x50 +#define XMAC_REG_RX_LSS_STATUS 0x58 +/* [RW 14] Maximum packet size in receive direction; exclusive of preamble & + * CRC in strip mode */ +#define XMAC_REG_RX_MAX_SIZE 0x40 +#define XMAC_REG_TX_CTRL 0x20 +#define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE (0x1<<0) +#define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE (0x1<<1) +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - + header pointer. */ +#define XCM_REG_XX_TABLE 0x20500 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define XSDM_REG_AGG_INT_EVENT_0 0x166038 +#define XSDM_REG_AGG_INT_EVENT_1 0x16603c +#define XSDM_REG_AGG_INT_EVENT_10 0x166060 +#define XSDM_REG_AGG_INT_EVENT_11 0x166064 +#define XSDM_REG_AGG_INT_EVENT_12 0x166068 +#define XSDM_REG_AGG_INT_EVENT_13 0x16606c +#define XSDM_REG_AGG_INT_EVENT_14 0x166070 +#define XSDM_REG_AGG_INT_EVENT_2 0x166040 +#define XSDM_REG_AGG_INT_EVENT_3 0x166044 +#define XSDM_REG_AGG_INT_EVENT_4 0x166048 +#define XSDM_REG_AGG_INT_EVENT_5 0x16604c +#define XSDM_REG_AGG_INT_EVENT_6 0x166050 +#define XSDM_REG_AGG_INT_EVENT_7 0x166054 +#define XSDM_REG_AGG_INT_EVENT_8 0x166058 +#define XSDM_REG_AGG_INT_EVENT_9 0x16605c +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define XSDM_REG_AGG_INT_MODE_0 0x1661b8 +#define XSDM_REG_AGG_INT_MODE_1 0x1661bc +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define XSDM_REG_CFC_RSP_START_ADDR 0x166008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c +/* [RW 16] The maximum value of the completion counter #1 */ +#define XSDM_REG_CMP_COUNTER_MAX1 0x166020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define XSDM_REG_CMP_COUNTER_MAX2 0x166024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define XSDM_REG_CMP_COUNTER_MAX3 0x166028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c +#define XSDM_REG_ENABLE_IN1 0x166238 +#define XSDM_REG_ENABLE_IN2 0x16623c +#define XSDM_REG_ENABLE_OUT1 0x166240 +#define XSDM_REG_ENABLE_OUT2 0x166244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc +/* [ST 32] The number of ACK after placement messages received */ +#define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c +/* [ST 32] The number of packet end messages received from the parser */ +#define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274 +/* [ST 32] The number of requests received from the pxp async if */ +#define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278 +/* [ST 32] The number of commands received in queue 0 */ +#define XSDM_REG_NUM_OF_Q0_CMD 0x166248 +/* [ST 32] The number of commands received in queue 10 */ +#define XSDM_REG_NUM_OF_Q10_CMD 0x16626c +/* [ST 32] The number of commands received in queue 11 */ +#define XSDM_REG_NUM_OF_Q11_CMD 0x166270 +/* [ST 32] The number of commands received in queue 1 */ +#define XSDM_REG_NUM_OF_Q1_CMD 0x16624c +/* [ST 32] The number of commands received in queue 3 */ +#define XSDM_REG_NUM_OF_Q3_CMD 0x166250 +/* [ST 32] The number of commands received in queue 4 */ +#define XSDM_REG_NUM_OF_Q4_CMD 0x166254 +/* [ST 32] The number of commands received in queue 5 */ +#define XSDM_REG_NUM_OF_Q5_CMD 0x166258 +/* [ST 32] The number of commands received in queue 6 */ +#define XSDM_REG_NUM_OF_Q6_CMD 0x16625c +/* [ST 32] The number of commands received in queue 7 */ +#define XSDM_REG_NUM_OF_Q7_CMD 0x166260 +/* [ST 32] The number of commands received in queue 8 */ +#define XSDM_REG_NUM_OF_Q8_CMD 0x166264 +/* [ST 32] The number of commands received in queue 9 */ +#define XSDM_REG_NUM_OF_Q9_CMD 0x166268 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define XSDM_REG_Q_COUNTER_START_ADDR 0x166010 +/* [W 17] Generate an operation after completion; bit-16 is + * AggVectIdx_valid; bits 15:8 are AggVectIdx; bits 7:5 are the TRIG and + * bits 4:0 are the T124Param[4:0] */ +#define XSDM_REG_OPERATION_GEN 0x1664c4 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558 +/* [RW 32] Tick for timer counter. Applicable only when + ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define XSDM_REG_TIMER_TICK 0x166000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define XSDM_REG_XSDM_INT_MASK_0 0x16629c +#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac +/* [R 32] Interrupt register #0 read */ +#define XSDM_REG_XSDM_INT_STS_0 0x166290 +#define XSDM_REG_XSDM_INT_STS_1 0x1662a0 +/* [RW 11] Parity mask register #0 read/write */ +#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc +/* [R 11] Parity register #0 read */ +#define XSDM_REG_XSDM_PRTY_STS 0x1662b0 +/* [RC 11] Parity register #0 read clear */ +#define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define XSEM_REG_ARB_CYCLE_SIZE 0x280034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define XSEM_REG_ARB_ELEMENT0 0x280020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */ +#define XSEM_REG_ARB_ELEMENT1 0x280024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 + and ~xsem_registers_arb_element1.arb_element1 */ +#define XSEM_REG_ARB_ELEMENT2 0x280028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~xsem_registers_arb_element0.arb_element0 and + ~xsem_registers_arb_element1.arb_element1 and + ~xsem_registers_arb_element2.arb_element2 */ +#define XSEM_REG_ARB_ELEMENT3 0x28002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 + and ~xsem_registers_arb_element1.arb_element1 and + ~xsem_registers_arb_element2.arb_element2 and + ~xsem_registers_arb_element3.arb_element3 */ +#define XSEM_REG_ARB_ELEMENT4 0x280030 +#define XSEM_REG_ENABLE_IN 0x2800a4 +#define XSEM_REG_ENABLE_OUT 0x2800a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define XSEM_REG_FAST_MEMORY 0x2a0000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define XSEM_REG_FIC0_DISABLE 0x280224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define XSEM_REG_FIC1_DISABLE 0x280234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define XSEM_REG_INT_TABLE 0x280400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define XSEM_REG_MSG_NUM_FIC0 0x280000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define XSEM_REG_MSG_NUM_FIC1 0x280004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define XSEM_REG_MSG_NUM_FOC0 0x280008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define XSEM_REG_MSG_NUM_FOC1 0x28000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define XSEM_REG_MSG_NUM_FOC2 0x280010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define XSEM_REG_MSG_NUM_FOC3 0x280014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define XSEM_REG_PAS_DISABLE 0x28024c +/* [WB 128] Debug only. Passive buffer memory */ +#define XSEM_REG_PASSIVE_BUFFER 0x282000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define XSEM_REG_PRAM 0x2c0000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define XSEM_REG_THREADS_LIST 0x2802e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define XSEM_REG_TS_0_AS 0x280038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define XSEM_REG_TS_10_AS 0x280060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define XSEM_REG_TS_11_AS 0x280064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define XSEM_REG_TS_12_AS 0x280068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define XSEM_REG_TS_13_AS 0x28006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define XSEM_REG_TS_14_AS 0x280070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define XSEM_REG_TS_15_AS 0x280074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define XSEM_REG_TS_16_AS 0x280078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define XSEM_REG_TS_17_AS 0x28007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define XSEM_REG_TS_18_AS 0x280080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define XSEM_REG_TS_1_AS 0x28003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define XSEM_REG_TS_2_AS 0x280040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define XSEM_REG_TS_3_AS 0x280044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define XSEM_REG_TS_4_AS 0x280048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define XSEM_REG_TS_5_AS 0x28004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define XSEM_REG_TS_6_AS 0x280050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define XSEM_REG_TS_7_AS 0x280054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define XSEM_REG_TS_8_AS 0x280058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define XSEM_REG_TS_9_AS 0x28005c +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define XSEM_REG_VFPF_ERR_NUM 0x280380 +/* [RW 32] Interrupt mask register #0 read/write */ +#define XSEM_REG_XSEM_INT_MASK_0 0x280110 +#define XSEM_REG_XSEM_INT_MASK_1 0x280120 +/* [R 32] Interrupt register #0 read */ +#define XSEM_REG_XSEM_INT_STS_0 0x280104 +#define XSEM_REG_XSEM_INT_STS_1 0x280114 +/* [RW 32] Parity mask register #0 read/write */ +#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 +#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 +/* [R 32] Parity register #0 read */ +#define XSEM_REG_XSEM_PRTY_STS_0 0x280124 +#define XSEM_REG_XSEM_PRTY_STS_1 0x280134 +/* [RC 32] Parity register #0 read clear */ +#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128 +#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138 +#define MCPR_ACCESS_LOCK_LOCK (1L<<31) +#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) +#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) +#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) +#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0) +#define MCPR_NVM_COMMAND_DOIT (1L<<4) +#define MCPR_NVM_COMMAND_DONE (1L<<3) +#define MCPR_NVM_COMMAND_FIRST (1L<<7) +#define MCPR_NVM_COMMAND_LAST (1L<<8) +#define MCPR_NVM_COMMAND_WR (1L<<5) +#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9) +#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) +#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) +#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3) +#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) +#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3) +#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3) +#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3) +#define BIGMAC_REGISTER_RX_LSS_STATUS (0x43<<3) +#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3) +#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3) +#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3) +#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3) +#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3) +#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3) +#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) +#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) +#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) +#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3) +#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) +#define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3) +#define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3) +#define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3) +#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3) +#define BIGMAC2_REGISTER_RX_LSS_STAT (0x3E<<3) +#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3) +#define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3) +#define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3) +#define BIGMAC2_REGISTER_RX_STAT_GRPP (0x51<<3) +#define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3) +#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3) +#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3) +#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTPP (0x24<<3) +#define EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define EMAC_LED_100MB_OVERRIDE (1L<<2) +#define EMAC_LED_10MB_OVERRIDE (1L<<3) +#define EMAC_LED_2500MB_OVERRIDE (1L<<12) +#define EMAC_LED_OVERRIDE (1L<<0) +#define EMAC_LED_TRAFFIC (1L<<6) +#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) +#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26) +#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) +#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26) +#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26) +#define EMAC_MDIO_COMM_DATA (0xffffL<<0) +#define EMAC_MDIO_COMM_START_BUSY (1L<<29) +#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) +#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 +#define EMAC_MDIO_STATUS_10MB (1L<<1) +#define EMAC_MODE_25G_MODE (1L<<5) +#define EMAC_MODE_HALF_DUPLEX (1L<<1) +#define EMAC_MODE_PORT_GMII (2L<<2) +#define EMAC_MODE_PORT_MII (1L<<2) +#define EMAC_MODE_PORT_MII_10M (3L<<2) +#define EMAC_MODE_RESET (1L<<0) +#define EMAC_REG_EMAC_LED 0xc +#define EMAC_REG_EMAC_MAC_MATCH 0x10 +#define EMAC_REG_EMAC_MDIO_COMM 0xac +#define EMAC_REG_EMAC_MDIO_MODE 0xb4 +#define EMAC_REG_EMAC_MDIO_STATUS 0xb0 +#define EMAC_REG_EMAC_MODE 0x0 +#define EMAC_REG_EMAC_RX_MODE 0xc8 +#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c +#define EMAC_REG_EMAC_RX_STAT_AC 0x180 +#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4 +#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23 +#define EMAC_REG_EMAC_TX_MODE 0xbc +#define EMAC_REG_EMAC_TX_STAT_AC 0x280 +#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22 +#define EMAC_REG_RX_PFC_MODE 0x320 +#define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2) +#define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1) +#define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0) +#define EMAC_REG_RX_PFC_PARAM 0x324 +#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0 +#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16 +#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328 +#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330 +#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c +#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334 +#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0) +#define EMAC_RX_MODE_FLOW_EN (1L<<2) +#define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) +#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) +#define EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define EMAC_RX_MODE_RESET (1L<<0) +#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) +#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) +#define EMAC_TX_MODE_FLOW_EN (1L<<4) +#define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_0 0 +#define MISC_REGISTERS_GPIO_1 1 +#define MISC_REGISTERS_GPIO_2 2 +#define MISC_REGISTERS_GPIO_3 3 +#define MISC_REGISTERS_GPIO_CLR_POS 16 +#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_HIGH 1 +#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_INT_CLR_POS 24 +#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0 +#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1 +#define MISC_REGISTERS_GPIO_INT_SET_POS 16 +#define MISC_REGISTERS_GPIO_LOW 0 +#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_GPIO_PORT_SHIFT 4 +#define MISC_REGISTERS_GPIO_SET_POS 8 +#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 +#define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1<<0) +#define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1<<19) +#define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29) +#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7) +#define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26) +#define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1<<27) +#define MISC_REGISTERS_RESET_REG_1_RST_XSEM (0x1<<22) +#define MISC_REGISTERS_RESET_REG_1_SET 0x584 +#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 +#define MISC_REGISTERS_RESET_REG_2_MSTAT0 (0x1<<24) +#define MISC_REGISTERS_RESET_REG_2_MSTAT1 (0x1<<25) +#define MISC_REGISTERS_RESET_REG_2_PGLC (0x1<<19) +#define MISC_REGISTERS_RESET_REG_2_RST_ATC (0x1<<17) +#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0) +#define MISC_REGISTERS_RESET_REG_2_RST_BMAC1 (0x1<<1) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0 (0x1<<2) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1 (0x1<<3) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE (0x1<<15) +#define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1<<4) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1<<6) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE (0x1<<8) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU (0x1<<7) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5) +#define MISC_REGISTERS_RESET_REG_2_RST_MDIO (0x1<<13) +#define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE (0x1<<11) +#define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO (0x1<<13) +#define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1<<9) +#define MISC_REGISTERS_RESET_REG_2_SET 0x594 +#define MISC_REGISTERS_RESET_REG_2_UMAC0 (0x1<<20) +#define MISC_REGISTERS_RESET_REG_2_UMAC1 (0x1<<21) +#define MISC_REGISTERS_RESET_REG_2_XMAC (0x1<<22) +#define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT (0x1<<23) +#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8 +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) +#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 +#define MISC_REGISTERS_SPIO_4 4 +#define MISC_REGISTERS_SPIO_5 5 +#define MISC_REGISTERS_SPIO_7 7 +#define MISC_REGISTERS_SPIO_CLR_POS 16 +#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_SPIO_FLOAT_POS 24 +#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16 +#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_SPIO_SET_POS 8 +#define MISC_SPIO_CLR_POS 16 +#define MISC_SPIO_FLOAT (0xffL<<24) +#define MISC_SPIO_FLOAT_POS 24 +#define MISC_SPIO_INPUT_HI_Z 2 +#define MISC_SPIO_INT_OLD_SET_POS 16 +#define MISC_SPIO_OUTPUT_HIGH 1 +#define MISC_SPIO_OUTPUT_LOW 0 +#define MISC_SPIO_SET_POS 8 +#define MISC_SPIO_SPIO4 0x10 +#define MISC_SPIO_SPIO5 0x20 +#define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB 13 +#define HW_LOCK_RESOURCE_DRV_FLAGS 10 +#define HW_LOCK_RESOURCE_GPIO 1 +#define HW_LOCK_RESOURCE_MDIO 0 +#define HW_LOCK_RESOURCE_NVRAM 12 +#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3 +#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8 +#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9 +#define HW_LOCK_RESOURCE_RECOVERY_REG 11 +#define HW_LOCK_RESOURCE_RESET 5 +#define HW_LOCK_RESOURCE_SPIO 2 +#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT (0x1<<19) +#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) +#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31) +#define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30) +#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (0x1<<9) +#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (0x1<<8) +#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (0x1<<7) +#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (0x1<<6) +#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (0x1<<29) +#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (0x1<<28) +#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (0x1<<1) +#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (0x1<<0) +#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (0x1<<18) +#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (0x1<<11) +#define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR (0x1<<10) +#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (0x1<<13) +#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (0x1<<12) +#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (0x1<<12) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (0x1<<28) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (0x1<<31) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (0x1<<29) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (0x1<<30) +#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (0x1<<15) +#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (0x1<<14) +#define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR (0x1<<14) +#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (0x1<<20) +#define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT (0x1<<31) +#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (0x1<<30) +#define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR (0x1<<0) +#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3) +#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (0x1<<3) +#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (0x1<<3) +#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (0x1<<22) +#define AEU_INPUTS_ATTN_BITS_SPIO5 (0x1<<15) +#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (0x1<<27) +#define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR (0x1<<26) +#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (0x1<<25) +#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (0x1<<24) +#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (0x1<<29) +#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (0x1<<28) +#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (0x1<<23) +#define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR (0x1<<22) +#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (0x1<<27) +#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (0x1<<26) +#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (0x1<<21) +#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (0x1<<20) +#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (0x1<<25) +#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (0x1<<24) +#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (0x1<<16) +#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (0x1<<9) +#define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR (0x1<<8) +#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (0x1<<7) +#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (0x1<<6) +#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (0x1<<11) +#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (0x1<<10) + +#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (0x1<<9) + +#define RESERVED_GENERAL_ATTENTION_BIT_0 0 + +#define EVEREST_GEN_ATTN_IN_USE_MASK 0x7ffe0 +#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000 + +#define RESERVED_GENERAL_ATTENTION_BIT_6 6 +#define RESERVED_GENERAL_ATTENTION_BIT_7 7 +#define RESERVED_GENERAL_ATTENTION_BIT_8 8 +#define RESERVED_GENERAL_ATTENTION_BIT_9 9 +#define RESERVED_GENERAL_ATTENTION_BIT_10 10 +#define RESERVED_GENERAL_ATTENTION_BIT_11 11 +#define RESERVED_GENERAL_ATTENTION_BIT_12 12 +#define RESERVED_GENERAL_ATTENTION_BIT_13 13 +#define RESERVED_GENERAL_ATTENTION_BIT_14 14 +#define RESERVED_GENERAL_ATTENTION_BIT_15 15 +#define RESERVED_GENERAL_ATTENTION_BIT_16 16 +#define RESERVED_GENERAL_ATTENTION_BIT_17 17 +#define RESERVED_GENERAL_ATTENTION_BIT_18 18 +#define RESERVED_GENERAL_ATTENTION_BIT_19 19 +#define RESERVED_GENERAL_ATTENTION_BIT_20 20 +#define RESERVED_GENERAL_ATTENTION_BIT_21 21 + +/* storm asserts attention bits */ +#define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7 +#define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8 +#define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9 +#define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10 + +/* mcp error attention bit */ +#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11 + +/*E1H NIG status sync attention mapped to group 4-7*/ +#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12 +#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13 +#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14 +#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15 +#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16 +#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17 +#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18 +#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19 + + +#define LATCHED_ATTN_RBCR 23 +#define LATCHED_ATTN_RBCT 24 +#define LATCHED_ATTN_RBCN 25 +#define LATCHED_ATTN_RBCU 26 +#define LATCHED_ATTN_RBCP 27 +#define LATCHED_ATTN_TIMEOUT_GRC 28 +#define LATCHED_ATTN_RSVD_GRC 29 +#define LATCHED_ATTN_ROM_PARITY_MCP 30 +#define LATCHED_ATTN_UM_RX_PARITY_MCP 31 +#define LATCHED_ATTN_UM_TX_PARITY_MCP 32 +#define LATCHED_ATTN_SCPAD_PARITY_MCP 33 + +#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32) +#define GENERAL_ATTEN_OFFSET(atten_name)\ + (1UL << ((94 + atten_name) % 32)) +/* + * This file defines GRC base address for every block. + * This file is included by chipsim, asm microcode and cpp microcode. + * These values are used in Design.xml on regBase attribute + * Use the base with the generated offsets of specific registers. + */ + +#define GRCBASE_PXPCS 0x000000 +#define GRCBASE_PCICONFIG 0x002000 +#define GRCBASE_PCIREG 0x002400 +#define GRCBASE_EMAC0 0x008000 +#define GRCBASE_EMAC1 0x008400 +#define GRCBASE_DBU 0x008800 +#define GRCBASE_MISC 0x00A000 +#define GRCBASE_DBG 0x00C000 +#define GRCBASE_NIG 0x010000 +#define GRCBASE_XCM 0x020000 +#define GRCBASE_PRS 0x040000 +#define GRCBASE_SRCH 0x040400 +#define GRCBASE_TSDM 0x042000 +#define GRCBASE_TCM 0x050000 +#define GRCBASE_BRB1 0x060000 +#define GRCBASE_MCP 0x080000 +#define GRCBASE_UPB 0x0C1000 +#define GRCBASE_CSDM 0x0C2000 +#define GRCBASE_USDM 0x0C4000 +#define GRCBASE_CCM 0x0D0000 +#define GRCBASE_UCM 0x0E0000 +#define GRCBASE_CDU 0x101000 +#define GRCBASE_DMAE 0x102000 +#define GRCBASE_PXP 0x103000 +#define GRCBASE_CFC 0x104000 +#define GRCBASE_HC 0x108000 +#define GRCBASE_PXP2 0x120000 +#define GRCBASE_PBF 0x140000 +#define GRCBASE_UMAC0 0x160000 +#define GRCBASE_UMAC1 0x160400 +#define GRCBASE_XPB 0x161000 +#define GRCBASE_MSTAT0 0x162000 +#define GRCBASE_MSTAT1 0x162800 +#define GRCBASE_XMAC0 0x163000 +#define GRCBASE_XMAC1 0x163800 +#define GRCBASE_TIMERS 0x164000 +#define GRCBASE_XSDM 0x166000 +#define GRCBASE_QM 0x168000 +#define GRCBASE_DQ 0x170000 +#define GRCBASE_TSEM 0x180000 +#define GRCBASE_CSEM 0x200000 +#define GRCBASE_XSEM 0x280000 +#define GRCBASE_USEM 0x300000 +#define GRCBASE_MISC_AEU GRCBASE_MISC + + +/* offset of configuration space in the pci core register */ +#define PCICFG_OFFSET 0x2000 +#define PCICFG_VENDOR_ID_OFFSET 0x00 +#define PCICFG_DEVICE_ID_OFFSET 0x02 +#define PCICFG_COMMAND_OFFSET 0x04 +#define PCICFG_COMMAND_IO_SPACE (1<<0) +#define PCICFG_COMMAND_MEM_SPACE (1<<1) +#define PCICFG_COMMAND_BUS_MASTER (1<<2) +#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3) +#define PCICFG_COMMAND_MWI_CYCLES (1<<4) +#define PCICFG_COMMAND_VGA_SNOOP (1<<5) +#define PCICFG_COMMAND_PERR_ENA (1<<6) +#define PCICFG_COMMAND_STEPPING (1<<7) +#define PCICFG_COMMAND_SERR_ENA (1<<8) +#define PCICFG_COMMAND_FAST_B2B (1<<9) +#define PCICFG_COMMAND_INT_DISABLE (1<<10) +#define PCICFG_COMMAND_RESERVED (0x1f<<11) +#define PCICFG_STATUS_OFFSET 0x06 +#define PCICFG_REVISION_ID_OFFSET 0x08 +#define PCICFG_REVESION_ID_MASK 0xff +#define PCICFG_REVESION_ID_ERROR_VAL 0xff +#define PCICFG_CACHE_LINE_SIZE 0x0c +#define PCICFG_LATENCY_TIMER 0x0d +#define PCICFG_BAR_1_LOW 0x10 +#define PCICFG_BAR_1_HIGH 0x14 +#define PCICFG_BAR_2_LOW 0x18 +#define PCICFG_BAR_2_HIGH 0x1c +#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c +#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e +#define PCICFG_INT_LINE 0x3c +#define PCICFG_INT_PIN 0x3d +#define PCICFG_PM_CAPABILITY 0x48 +#define PCICFG_PM_CAPABILITY_VERSION (0x3<<16) +#define PCICFG_PM_CAPABILITY_CLOCK (1<<19) +#define PCICFG_PM_CAPABILITY_RESERVED (1<<20) +#define PCICFG_PM_CAPABILITY_DSI (1<<21) +#define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22) +#define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25) +#define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26) +#define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27) +#define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28) +#define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29) +#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30) +#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31) +#define PCICFG_PM_CSR_OFFSET 0x4c +#define PCICFG_PM_CSR_STATE (0x3<<0) +#define PCICFG_PM_CSR_PME_ENABLE (1<<8) +#define PCICFG_PM_CSR_PME_STATUS (1<<15) +#define PCICFG_MSI_CAP_ID_OFFSET 0x58 +#define PCICFG_MSI_CONTROL_ENABLE (0x1<<16) +#define PCICFG_MSI_CONTROL_MCAP (0x7<<17) +#define PCICFG_MSI_CONTROL_MENA (0x7<<20) +#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23) +#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24) +#define PCICFG_GRC_ADDRESS 0x78 +#define PCICFG_GRC_DATA 0x80 +#define PCICFG_ME_REGISTER 0x98 +#define PCICFG_MSIX_CAP_ID_OFFSET 0xa0 +#define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16) +#define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27) +#define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30) +#define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31) + +#define PCICFG_DEVICE_CONTROL 0xb4 +#define PCICFG_DEVICE_STATUS 0xb6 +#define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0) +#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1) +#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2) +#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3) +#define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4) +#define PCICFG_DEVICE_STATUS_NO_PEND (1<<5) +#define PCICFG_LINK_CONTROL 0xbc + + +#define BAR_USTRORM_INTMEM 0x400000 +#define BAR_CSTRORM_INTMEM 0x410000 +#define BAR_XSTRORM_INTMEM 0x420000 +#define BAR_TSTRORM_INTMEM 0x430000 + +/* for accessing the IGU in case of status block ACK */ +#define BAR_IGU_INTMEM 0x440000 + +#define BAR_DOORBELL_OFFSET 0x800000 + +#define BAR_ME_REGISTER 0x450000 + +/* config_2 offset */ +#define GRC_CONFIG_2_SIZE_REG 0x408 +#define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) +#define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) +#define PCI_CONFIG_2_BAR1_64ENA (1L<<4) +#define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) +#define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) +#define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) +#define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8) +#define PCI_CONFIG_2_BAR_PREFETCH (1L<<16) +#define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17) + +/* config_3 offset */ +#define GRC_CONFIG_3_SIZE_REG 0x40c +#define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define PCI_CONFIG_3_FORCE_PME (1L<<24) +#define PCI_CONFIG_3_PME_STATUS (1L<<25) +#define PCI_CONFIG_3_PME_ENABLE (1L<<26) +#define PCI_CONFIG_3_PM_STATE (0x3L<<27) +#define PCI_CONFIG_3_VAUX_PRESET (1L<<30) +#define PCI_CONFIG_3_PCI_POWER (1L<<31) + +#define GRC_BAR2_CONFIG 0x4e0 +#define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0) +#define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0) +#define PCI_CONFIG_2_BAR2_64ENA (1L<<4) + +#define PCI_PM_DATA_A 0x410 +#define PCI_PM_DATA_B 0x414 +#define PCI_ID_VAL1 0x434 +#define PCI_ID_VAL2 0x438 +#define PCI_ID_VAL3 0x43c + +#define GRC_CONFIG_REG_VF_MSIX_CONTROL 0x61C +#define GRC_CONFIG_REG_PF_INIT_VF 0x624 +#define GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK 0xf +/* First VF_NUM for PF is encoded in this register. + * The number of VFs assigned to a PF is assumed to be a multiple of 8. + * Software should program these bits based on Total Number of VFs \ + * programmed for each PF. + * Since registers from 0x000-0x7ff are split across functions, each PF will + * have the same location for the same 4 bits + */ + +#define PXPCS_TL_CONTROL_5 0x814 +#define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ +#define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN (1 << 28) /*WC*/ +#define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN (1 << 27) /*WC*/ +#define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN (1 << 26) /*WC*/ +#define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR (1 << 25) /*WC*/ +#define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW (1 << 24) /*WC*/ +#define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN (1 << 23) /*RO*/ +#define PXPCS_TL_CONTROL_5_DL_ERR_ATTN (1 << 22) /*RO*/ +#define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE (1 << 21) /*WC*/ +#define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG (1 << 20) /*WC*/ +#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1 (1 << 19) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 (1 << 18) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_ECRC1 (1 << 17) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1 (1 << 16) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1 (1 << 15) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1 (1 << 14) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1 (1 << 13) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1 (1 << 12) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1 (1 << 11) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1 (1 << 10) /*WC*/ +#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT (1 << 9) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT (1 << 8) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_ECRC (1 << 7) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP (1 << 6) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW (1 << 5) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL (1 << 4) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT (1 << 3) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT (1 << 2) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL (1 << 1) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP (1 << 0) /*WC*/ + + +#define PXPCS_TL_FUNC345_STAT 0x854 +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4 (1 << 29) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\ + (1 << 28) /* Unsupported Request Error Status in function4, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\ + (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\ + (1 << 26) /* Malformed TLP Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\ + (1 << 25) /* Receiver Overflow Status Status in function 4, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\ + (1 << 24) /* Unexpected Completion Status Status in function 4, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\ + (1 << 23) /* Receive UR Statusin function 4. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\ + (1 << 22) /* Completer Timeout Status Status in function 4, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\ + (1 << 21) /* Flow Control Protocol Error Status Status in \ + function 4, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\ + (1 << 20) /* Poisoned Error Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3 (1 << 19) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\ + (1 << 18) /* Unsupported Request Error Status in function3, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\ + (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\ + (1 << 16) /* Malformed TLP Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\ + (1 << 15) /* Receiver Overflow Status Status in function 3, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\ + (1 << 14) /* Unexpected Completion Status Status in function 3, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\ + (1 << 13) /* Receive UR Statusin function 3. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\ + (1 << 12) /* Completer Timeout Status Status in function 3, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\ + (1 << 11) /* Flow Control Protocol Error Status Status in \ + function 3, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\ + (1 << 10) /* Poisoned Error Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2 (1 << 9) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\ + (1 << 8) /* Unsupported Request Error Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\ + (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\ + (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\ + (1 << 5) /* Receiver Overflow Status Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\ + (1 << 4) /* Unexpected Completion Status Status for Function 2, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\ + (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\ + (1 << 2) /* Completer Timeout Status Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\ + (1 << 1) /* Flow Control Protocol Error Status Status for \ + Function 2, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\ + (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ + + +#define PXPCS_TL_FUNC678_STAT 0x85C +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7 (1 << 29) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\ + (1 << 28) /* Unsupported Request Error Status in function7, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\ + (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\ + (1 << 26) /* Malformed TLP Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\ + (1 << 25) /* Receiver Overflow Status Status in function 7, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\ + (1 << 24) /* Unexpected Completion Status Status in function 7, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\ + (1 << 23) /* Receive UR Statusin function 7. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\ + (1 << 22) /* Completer Timeout Status Status in function 7, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\ + (1 << 21) /* Flow Control Protocol Error Status Status in \ + function 7, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\ + (1 << 20) /* Poisoned Error Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6 (1 << 19) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\ + (1 << 18) /* Unsupported Request Error Status in function6, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\ + (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\ + (1 << 16) /* Malformed TLP Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\ + (1 << 15) /* Receiver Overflow Status Status in function 6, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\ + (1 << 14) /* Unexpected Completion Status Status in function 6, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\ + (1 << 13) /* Receive UR Statusin function 6. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\ + (1 << 12) /* Completer Timeout Status Status in function 6, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\ + (1 << 11) /* Flow Control Protocol Error Status Status in \ + function 6, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\ + (1 << 10) /* Poisoned Error Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5 (1 << 9) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\ + (1 << 8) /* Unsupported Request Error Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\ + (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\ + (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\ + (1 << 5) /* Receiver Overflow Status Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\ + (1 << 4) /* Unexpected Completion Status Status for Function 5, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\ + (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\ + (1 << 2) /* Completer Timeout Status Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\ + (1 << 1) /* Flow Control Protocol Error Status Status for \ + Function 5, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\ + (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ + + +#define BAR_USTRORM_INTMEM 0x400000 +#define BAR_CSTRORM_INTMEM 0x410000 +#define BAR_XSTRORM_INTMEM 0x420000 +#define BAR_TSTRORM_INTMEM 0x430000 + +/* for accessing the IGU in case of status block ACK */ +#define BAR_IGU_INTMEM 0x440000 + +#define BAR_DOORBELL_OFFSET 0x800000 + +#define BAR_ME_REGISTER 0x450000 +#define ME_REG_PF_NUM_SHIFT 0 +#define ME_REG_PF_NUM\ + (7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */ +#define ME_REG_VF_VALID (1<<8) +#define ME_REG_VF_NUM_SHIFT 9 +#define ME_REG_VF_NUM_MASK (0x3f<<ME_REG_VF_NUM_SHIFT) +#define ME_REG_VF_ERR (0x1<<3) +#define ME_REG_ABS_PF_NUM_SHIFT 16 +#define ME_REG_ABS_PF_NUM\ + (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */ + + +#define PXP_VF_ADDR_IGU_START 0 +#define PXP_VF_ADDR_IGU_SIZE 0x3000 +#define PXP_VF_ADDR_IGU_END\ + ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1) + +#define PXP_VF_ADDR_USDM_QUEUES_START 0x3000 +#define PXP_VF_ADDR_USDM_QUEUES_SIZE\ + (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE) +#define PXP_VF_ADDR_USDM_QUEUES_END\ + ((PXP_VF_ADDR_USDM_QUEUES_START) + (PXP_VF_ADDR_USDM_QUEUES_SIZE) - 1) + +#define PXP_VF_ADDR_CSDM_GLOBAL_START 0x7600 +#define PXP_VF_ADDR_CSDM_GLOBAL_SIZE (PXP_ADDR_REG_SIZE) +#define PXP_VF_ADDR_CSDM_GLOBAL_END\ + ((PXP_VF_ADDR_CSDM_GLOBAL_START) + (PXP_VF_ADDR_CSDM_GLOBAL_SIZE) - 1) + +#define PXP_VF_ADDR_DB_START 0x7c00 +#define PXP_VF_ADDR_DB_SIZE 0x200 +#define PXP_VF_ADDR_DB_END\ + ((PXP_VF_ADDR_DB_START) + (PXP_VF_ADDR_DB_SIZE) - 1) + +#define MDIO_REG_BANK_CL73_IEEEB0 0x0 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000 + +#define MDIO_REG_BANK_CL73_IEEEB1 0x10 +#define MDIO_CL73_IEEEB1_AN_ADV1 0x00 +#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400 +#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800 +#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00 +#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00 +#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00 +#define MDIO_CL73_IEEEB1_AN_LP_ADV2 0x04 + +#define MDIO_REG_BANK_RX0 0x80b0 +#define MDIO_RX0_RX_STATUS 0x10 +#define MDIO_RX0_RX_STATUS_SIGDET 0x8000 +#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000 +#define MDIO_RX0_RX_EQ_BOOST 0x1c +#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX1 0x80c0 +#define MDIO_RX1_RX_EQ_BOOST 0x1c +#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX2 0x80d0 +#define MDIO_RX2_RX_EQ_BOOST 0x1c +#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX3 0x80e0 +#define MDIO_RX3_RX_EQ_BOOST 0x1c +#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX_ALL 0x80f0 +#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c +#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_TX0 0x8060 +#define MDIO_TX0_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX1 0x8070 +#define MDIO_TX1_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX2 0x8080 +#define MDIO_TX2_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX3 0x8090 +#define MDIO_TX3_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000 +#define MDIO_BLOCK0_XGXS_CONTROL 0x10 + +#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010 +#define MDIO_BLOCK1_LANE_CTRL0 0x15 +#define MDIO_BLOCK1_LANE_CTRL1 0x16 +#define MDIO_BLOCK1_LANE_CTRL2 0x17 +#define MDIO_BLOCK1_LANE_PRBS 0x19 + +#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 +#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 + +#define MDIO_REG_BANK_GP_STATUS 0x8120 +#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR 0x0F00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900 + + +#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) + +#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1 0x18 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 + +#define MDIO_REG_BANK_OVER_1G 0x8320 +#define MDIO_OVER_1G_DIGCTL_3_4 0x14 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 +#define MDIO_OVER_1G_UP1 0x19 +#define MDIO_OVER_1G_UP1_2_5G 0x0001 +#define MDIO_OVER_1G_UP1_5G 0x0002 +#define MDIO_OVER_1G_UP1_6G 0x0004 +#define MDIO_OVER_1G_UP1_10G 0x0010 +#define MDIO_OVER_1G_UP1_10GH 0x0008 +#define MDIO_OVER_1G_UP1_12G 0x0020 +#define MDIO_OVER_1G_UP1_12_5G 0x0040 +#define MDIO_OVER_1G_UP1_13G 0x0080 +#define MDIO_OVER_1G_UP1_15G 0x0100 +#define MDIO_OVER_1G_UP1_16G 0x0200 +#define MDIO_OVER_1G_UP2 0x1A +#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 +#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 +#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 +#define MDIO_OVER_1G_UP3 0x1B +#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 +#define MDIO_OVER_1G_LP_UP1 0x1C +#define MDIO_OVER_1G_LP_UP2 0x1D +#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 +#define MDIO_OVER_1G_LP_UP3 0x1E + +#define MDIO_REG_BANK_REMOTE_PHY 0x8330 +#define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10 +#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010 +#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600 + +#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 + +#define MDIO_REG_BANK_CL73_USERB0 0x8370 +#define MDIO_CL73_USERB0_CL73_UCTRL 0x10 +#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002 +#define MDIO_CL73_USERB0_CL73_USTAT1 0x11 +#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100 +#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 + +#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 +#define MDIO_AER_BLOCK_AER_REG 0x1E + +#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 +#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 +#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 +#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 +#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 +#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 +#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 +#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 +/*WhenthelinkpartnerisinSGMIImode(bit0=1),then +bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge. +Theotherbitsarereservedandshouldbezero*/ +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 + + +#define MDIO_PMA_DEVAD 0x1 +/*ieee*/ +#define MDIO_PMA_REG_CTRL 0x0 +#define MDIO_PMA_REG_STATUS 0x1 +#define MDIO_PMA_REG_10G_CTRL2 0x7 +#define MDIO_PMA_REG_TX_DISABLE 0x0009 +#define MDIO_PMA_REG_RX_SD 0xa +/*bcm*/ +#define MDIO_PMA_REG_BCM_CTRL 0x0096 +#define MDIO_PMA_REG_FEC_CTRL 0x00ab +#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800 +#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808 +#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809 +#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02 +#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09 +#define MDIO_PMA_REG_MISC_CTRL 0xca0a +#define MDIO_PMA_REG_GEN_CTRL 0xca10 +#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188 +#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a +#define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12 +#define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13 +#define MDIO_PMA_REG_ROM_VER1 0xca19 +#define MDIO_PMA_REG_ROM_VER2 0xca1a +#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b +#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d +#define MDIO_PMA_REG_PLL_CTRL 0xca1e +#define MDIO_PMA_REG_MISC_CTRL0 0xca23 +#define MDIO_PMA_REG_LRM_MODE 0xca3f +#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 +#define MDIO_PMA_REG_MISC_CTRL1 0xca85 + +#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000 +#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c +#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002 +#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003 +#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820 +#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff +#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01 +#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05 + +#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005 +#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007 +#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff +#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02 +#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05 +#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808 +#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e +#define MDIO_PMA_REG_8727_PCS_GP 0xc842 +#define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4 + +#define MDIO_AN_REG_8727_MISC_CTRL 0x8309 + +#define MDIO_PMA_REG_8073_CHIP_REV 0xc801 +#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820 +#define MDIO_PMA_REG_8073_XAUI_WA 0xc841 +#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08 + +#define MDIO_PMA_REG_7101_RESET 0xc000 +#define MDIO_PMA_REG_7107_LED_CNTL 0xc007 +#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009 +#define MDIO_PMA_REG_7101_VER1 0xc026 +#define MDIO_PMA_REG_7101_VER2 0xc027 + +#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811 +#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c +#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f +#define MDIO_PMA_REG_8481_LED3_MASK 0xa832 +#define MDIO_PMA_REG_8481_LED3_BLINK 0xa834 +#define MDIO_PMA_REG_8481_LED5_MASK 0xa838 +#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835 +#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b +#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800 +#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11 + + +#define MDIO_WIS_DEVAD 0x2 +/*bcm*/ +#define MDIO_WIS_REG_LASI_CNTL 0x9002 +#define MDIO_WIS_REG_LASI_STATUS 0x9005 + +#define MDIO_PCS_DEVAD 0x3 +#define MDIO_PCS_REG_STATUS 0x0020 +#define MDIO_PCS_REG_LASI_STATUS 0x9005 +#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000 +#define MDIO_PCS_REG_7101_SPI_MUX 0xD008 +#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A +#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2) +#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028 + + +#define MDIO_XS_DEVAD 0x4 +#define MDIO_XS_PLL_SEQUENCER 0x8000 +#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a + +#define MDIO_XS_8706_REG_BANK_RX0 0x80bc +#define MDIO_XS_8706_REG_BANK_RX1 0x80cc +#define MDIO_XS_8706_REG_BANK_RX2 0x80dc +#define MDIO_XS_8706_REG_BANK_RX3 0x80ec +#define MDIO_XS_8706_REG_BANK_RXA 0x80fc + +#define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA + +#define MDIO_AN_DEVAD 0x7 +/*ieee*/ +#define MDIO_AN_REG_CTRL 0x0000 +#define MDIO_AN_REG_STATUS 0x0001 +#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020 +#define MDIO_AN_REG_ADV_PAUSE 0x0010 +#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400 +#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800 +#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00 +#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00 +#define MDIO_AN_REG_ADV 0x0011 +#define MDIO_AN_REG_ADV2 0x0012 +#define MDIO_AN_REG_LP_AUTO_NEG 0x0013 +#define MDIO_AN_REG_LP_AUTO_NEG2 0x0014 +#define MDIO_AN_REG_MASTER_STATUS 0x0021 +#define MDIO_AN_REG_EEE_ADV 0x003c +#define MDIO_AN_REG_LP_EEE_ADV 0x003d +/*bcm*/ +#define MDIO_AN_REG_LINK_STATUS 0x8304 +#define MDIO_AN_REG_CL37_CL73 0x8370 +#define MDIO_AN_REG_CL37_AN 0xffe0 +#define MDIO_AN_REG_CL37_FC_LD 0xffe4 +#define MDIO_AN_REG_CL37_FC_LP 0xffe5 +#define MDIO_AN_REG_1000T_STATUS 0xffea + +#define MDIO_AN_REG_8073_2_5G 0x8329 +#define MDIO_AN_REG_8073_BAM 0x8350 + +#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 +#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 +#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40 +#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 +#define MDIO_AN_REG_848xx_ID_MSB 0xffe2 +#define BCM84858_PHY_ID 0x600d +#define MDIO_AN_REG_848xx_ID_LSB 0xffe3 +#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 +#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 +#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 +#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0 +#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008 +#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 +#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 +#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 +#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc + +/* BCM84823 only */ +#define MDIO_CTL_DEVAD 0x1e +#define MDIO_CTL_REG_84823_MEDIA 0x401a +#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018 + /* These pins configure the BCM84823 interface to MAC after reset. */ +#define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008 +#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010 + /* These pins configure the BCM84823 interface to Line after reset. */ +#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060 +#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020 +#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040 + /* When this pin is active high during reset, 10GBASE-T core is power + * down, When it is active low the 10GBASE-T is power up + */ +#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100 +#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000 +#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005 +#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080 +#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b +#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f +#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3 +#define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec +#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080 +/* BCM84858 only */ +#define MDIO_PMA_REG_84858_ALLOW_GPHY_ACT 0x8000 + +/* BCM84833 only */ +#define MDIO_84833_TOP_CFG_FW_REV 0x400f +#define MDIO_84833_TOP_CFG_FW_EEE 0x10b1 +#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81 +#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a +#define MDIO_84833_SUPER_ISOLATE 0x8000 +/* These are mailbox register set used by 84833/84858. */ +#define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039 +#define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a +#define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b +#define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c +#define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0) +#define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26) +#define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27) +#define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28) +#define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29) +#define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30) +#define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31) + +/* Mailbox command set used by 84833/84858 */ +#define PHY848xx_CMD_SET_PAIR_SWAP 0x8001 +#define PHY848xx_CMD_GET_EEE_MODE 0x8008 +#define PHY848xx_CMD_SET_EEE_MODE 0x8009 +/* Mailbox status set used by 84833 only */ +#define PHY84833_STATUS_CMD_RECEIVED 0x0001 +#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002 +#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004 +#define PHY84833_STATUS_CMD_COMPLETE_ERROR 0x0008 +#define PHY84833_STATUS_CMD_OPEN_FOR_CMDS 0x0010 +#define PHY84833_STATUS_CMD_SYSTEM_BOOT 0x0020 +#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040 +#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080 +#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5 +/* Mailbox Process */ +#define PHY84833_MB_PROCESS1 1 +#define PHY84833_MB_PROCESS2 2 +#define PHY84833_MB_PROCESS3 3 + +/* Mailbox status set used by 84858 only */ +#define PHY84858_STATUS_CMD_RECEIVED 0x0001 +#define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002 +#define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004 +#define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008 +#define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb + + +/* Warpcore clause 45 addressing */ +#define MDIO_WC_DEVAD 0x3 +#define MDIO_WC_REG_IEEE0BLK_MIICNTL 0x0 +#define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000 +#define MDIO_WC_REG_PCS_STATUS2 0x0021 +#define MDIO_WC_REG_PMD_KR_CONTROL 0x0096 +#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000 +#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e +#define MDIO_WC_REG_XGXSBLK1_DESKEW 0x8010 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL0 0x8015 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL1 0x8016 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL2 0x8017 +#define MDIO_WC_REG_TX0_ANA_CTRL0 0x8061 +#define MDIO_WC_REG_TX1_ANA_CTRL0 0x8071 +#define MDIO_WC_REG_TX2_ANA_CTRL0 0x8081 +#define MDIO_WC_REG_TX3_ANA_CTRL0 0x8091 +#define MDIO_WC_REG_TX0_TX_DRIVER 0x8067 +#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET 0x01 +#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_MASK 0x000e +#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET 0x04 +#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK 0x00f0 +#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET 0x08 +#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET 0x0c +#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_MASK 0x7000 +#define MDIO_WC_REG_TX1_TX_DRIVER 0x8077 +#define MDIO_WC_REG_TX2_TX_DRIVER 0x8087 +#define MDIO_WC_REG_TX3_TX_DRIVER 0x8097 +#define MDIO_WC_REG_RX0_ANARXCONTROL1G 0x80b9 +#define MDIO_WC_REG_RX2_ANARXCONTROL1G 0x80d9 +#define MDIO_WC_REG_RX0_PCI_CTRL 0x80ba +#define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca +#define MDIO_WC_REG_RX2_PCI_CTRL 0x80da +#define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea +#define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI 0x80fa +#define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104 +#define MDIO_WC_REG_XGXS_STATUS3 0x8129 +#define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130 +#define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131 +#define MDIO_WC_REG_XGXS_X2_CONTROL2 0x8141 +#define MDIO_WC_REG_XGXS_X2_CONTROL3 0x8142 +#define MDIO_WC_REG_XGXS_RX_LN_SWAP1 0x816B +#define MDIO_WC_REG_XGXS_TX_LN_SWAP1 0x8169 +#define MDIO_WC_REG_GP2_STATUS_GP_2_0 0x81d0 +#define MDIO_WC_REG_GP2_STATUS_GP_2_1 0x81d1 +#define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2 +#define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1 +#define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE +#define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET 0x0 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT 0x0 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR 0x1 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC 0x2 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI 0x3 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G 0x4 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET 0x4 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET 0x8 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET 0xc +#define MDIO_WC_REG_UC_INFO_B1_CRC 0x81FE +#define MDIO_WC_REG_DSC_SMC 0x8213 +#define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0 0x821e +#define MDIO_WC_REG_TX_FIR_TAP 0x82e2 +#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET 0x00 +#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK 0x000f +#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET 0x04 +#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK 0x03f0 +#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a +#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00 +#define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000 +#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP 0x82e2 +#define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3 +#define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6 +#define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL 0x82e7 +#define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL 0x82e8 +#define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL 0x82ec +#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1 0x8300 +#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2 0x8301 +#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3 0x8302 +#define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1 0x8304 +#define MDIO_WC_REG_SERDESDIGITAL_MISC1 0x8308 +#define MDIO_WC_REG_SERDESDIGITAL_MISC2 0x8309 +#define MDIO_WC_REG_DIGITAL3_UP1 0x8329 +#define MDIO_WC_REG_DIGITAL3_LP_UP1 0x832c +#define MDIO_WC_REG_DIGITAL4_MISC3 0x833c +#define MDIO_WC_REG_DIGITAL4_MISC5 0x833e +#define MDIO_WC_REG_DIGITAL5_MISC6 0x8345 +#define MDIO_WC_REG_DIGITAL5_MISC7 0x8349 +#define MDIO_WC_REG_DIGITAL5_LINK_STATUS 0x834d +#define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED 0x834e +#define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL 0x8350 +#define MDIO_WC_REG_CL49_USERB0_CTRL 0x8368 +#define MDIO_WC_REG_CL73_USERB0_CTRL 0x8370 +#define MDIO_WC_REG_CL73_USERB0_USTAT 0x8371 +#define MDIO_WC_REG_CL73_BAM_CTRL1 0x8372 +#define MDIO_WC_REG_CL73_BAM_CTRL2 0x8373 +#define MDIO_WC_REG_CL73_BAM_CTRL3 0x8374 +#define MDIO_WC_REG_CL73_BAM_CODE_FIELD 0x837b +#define MDIO_WC_REG_EEE_COMBO_CONTROL0 0x8390 +#define MDIO_WC_REG_TX66_CONTROL 0x83b0 +#define MDIO_WC_REG_RX66_CONTROL 0x83c0 +#define MDIO_WC_REG_RX66_SCW0 0x83c2 +#define MDIO_WC_REG_RX66_SCW1 0x83c3 +#define MDIO_WC_REG_RX66_SCW2 0x83c4 +#define MDIO_WC_REG_RX66_SCW3 0x83c5 +#define MDIO_WC_REG_RX66_SCW0_MASK 0x83c6 +#define MDIO_WC_REG_RX66_SCW1_MASK 0x83c7 +#define MDIO_WC_REG_RX66_SCW2_MASK 0x83c8 +#define MDIO_WC_REG_RX66_SCW3_MASK 0x83c9 +#define MDIO_WC_REG_FX100_CTRL1 0x8400 +#define MDIO_WC_REG_FX100_CTRL3 0x8402 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL5 0x8436 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL6 0x8437 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL7 0x8438 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL9 0x8439 +#define MDIO_WC_REG_CL82_USERB1_RX_CTRL10 0x843a +#define MDIO_WC_REG_CL82_USERB1_RX_CTRL11 0x843b +#define MDIO_WC_REG_ETA_CL73_OUI1 0x8453 +#define MDIO_WC_REG_ETA_CL73_OUI2 0x8454 +#define MDIO_WC_REG_ETA_CL73_OUI3 0x8455 +#define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE 0x8456 +#define MDIO_WC_REG_ETA_CL73_LD_UD_CODE 0x8457 +#define MDIO_WC_REG_MICROBLK_CMD 0xffc2 +#define MDIO_WC_REG_MICROBLK_DL_STATUS 0xffc5 +#define MDIO_WC_REG_MICROBLK_CMD3 0xffcc + +#define MDIO_WC_REG_AERBLK_AER 0xffde +#define MDIO_WC_REG_COMBO_IEEE0_MIICTRL 0xffe0 +#define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT 0xffe1 + +#define MDIO_WC0_XGXS_BLK2_LANE_RESET 0x810A +#define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT 0 +#define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT 4 + +#define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2 0x8141 + +#define DIGITAL5_ACTUAL_SPEED_TX_MASK 0x003f + +/* 54618se */ +#define MDIO_REG_GPHY_PHYID_LSB 0x3 +#define MDIO_REG_GPHY_ID_54618SE 0x5cd5 +#define MDIO_REG_GPHY_CL45_ADDR_REG 0xd +#define MDIO_REG_GPHY_CL45_DATA_REG 0xe +#define MDIO_REG_GPHY_EEE_RESOLVED 0x803e +#define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15 +#define MDIO_REG_GPHY_EXP_ACCESS 0x17 +#define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00 +#define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40 +#define MDIO_REG_GPHY_AUX_STATUS 0x19 +#define MDIO_REG_INTR_STATUS 0x1a +#define MDIO_REG_INTR_MASK 0x1b +#define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1) +#define MDIO_REG_GPHY_SHADOW 0x1c +#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10) +#define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10) +#define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15) +#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10) +#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8) + +#define IGU_FUNC_BASE 0x0400 + +#define IGU_ADDR_MSIX 0x0000 +#define IGU_ADDR_INT_ACK 0x0200 +#define IGU_ADDR_PROD_UPD 0x0201 +#define IGU_ADDR_ATTN_BITS_UPD 0x0202 +#define IGU_ADDR_ATTN_BITS_SET 0x0203 +#define IGU_ADDR_ATTN_BITS_CLR 0x0204 +#define IGU_ADDR_COALESCE_NOW 0x0205 +#define IGU_ADDR_SIMD_MASK 0x0206 +#define IGU_ADDR_SIMD_NOMASK 0x0207 +#define IGU_ADDR_MSI_CTL 0x0210 +#define IGU_ADDR_MSI_ADDR_LO 0x0211 +#define IGU_ADDR_MSI_ADDR_HI 0x0212 +#define IGU_ADDR_MSI_DATA 0x0213 + +#define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup 0 +#define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup 1 +#define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 2 +#define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup 3 + +#define COMMAND_REG_INT_ACK 0x0 +#define COMMAND_REG_PROD_UPD 0x4 +#define COMMAND_REG_ATTN_BITS_UPD 0x8 +#define COMMAND_REG_ATTN_BITS_SET 0xc +#define COMMAND_REG_ATTN_BITS_CLR 0x10 +#define COMMAND_REG_COALESCE_NOW 0x14 +#define COMMAND_REG_SIMD_MASK 0x18 +#define COMMAND_REG_SIMD_NOMASK 0x1c + + +#define IGU_MEM_BASE 0x0000 + +#define IGU_MEM_MSIX_BASE 0x0000 +#define IGU_MEM_MSIX_UPPER 0x007f +#define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff + +#define IGU_MEM_PBA_MSIX_BASE 0x0200 +#define IGU_MEM_PBA_MSIX_UPPER 0x0200 + +#define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201 +#define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff + +#define IGU_CMD_INT_ACK_BASE 0x0400 +#define IGU_CMD_INT_ACK_UPPER\ + (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1) +#define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff + +#define IGU_CMD_E2_PROD_UPD_BASE 0x0500 +#define IGU_CMD_E2_PROD_UPD_UPPER\ + (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1) +#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f + +#define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0 +#define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1 +#define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2 + +#define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3 +#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4 +#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5 +#define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6 + +#define IGU_REG_RESERVED_UPPER 0x05ff +/* Fields of IGU PF CONFIGURATION REGISTER */ +#define IGU_PF_CONF_FUNC_EN (0x1<<0) /* function enable */ +#define IGU_PF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */ +#define IGU_PF_CONF_INT_LINE_EN (0x1<<2) /* INT enable */ +#define IGU_PF_CONF_ATTN_BIT_EN (0x1<<3) /* attention enable */ +#define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */ +#define IGU_PF_CONF_SIMD_MODE (0x1<<5) /* simd all ones mode */ + +/* Fields of IGU VF CONFIGURATION REGISTER */ +#define IGU_VF_CONF_FUNC_EN (0x1<<0) /* function enable */ +#define IGU_VF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */ +#define IGU_VF_CONF_PARENT_MASK (0x3<<2) /* Parent PF */ +#define IGU_VF_CONF_PARENT_SHIFT 2 /* Parent PF */ +#define IGU_VF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */ + + +#define IGU_BC_DSB_NUM_SEGS 5 +#define IGU_BC_NDSB_NUM_SEGS 2 +#define IGU_NORM_DSB_NUM_SEGS 2 +#define IGU_NORM_NDSB_NUM_SEGS 1 +#define IGU_BC_BASE_DSB_PROD 128 +#define IGU_NORM_BASE_DSB_PROD 136 + + /* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \ + [5:2] = 0; [1:0] = PF number) */ +#define IGU_FID_ENCODE_IS_PF (0x1<<6) +#define IGU_FID_ENCODE_IS_PF_SHIFT 6 +#define IGU_FID_VF_NUM_MASK (0x3f) +#define IGU_FID_PF_NUM_MASK (0x7) + +#define IGU_REG_MAPPING_MEMORY_VALID (1<<0) +#define IGU_REG_MAPPING_MEMORY_VECTOR_MASK (0x3F<<1) +#define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT 1 +#define IGU_REG_MAPPING_MEMORY_FID_MASK (0x7F<<7) +#define IGU_REG_MAPPING_MEMORY_FID_SHIFT 7 + + +#define CDU_REGION_NUMBER_XCM_AG 2 +#define CDU_REGION_NUMBER_UCM_AG 4 + + +/* String-to-compress [31:8] = CID (all 24 bits) + * String-to-compress [7:4] = Region + * String-to-compress [3:0] = Type + */ +#define CDU_VALID_DATA(_cid, _region, _type)\ + (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf))) +#define CDU_CRC8(_cid, _region, _type)\ + (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff)) +#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\ + (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f)) +#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\ + (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7)) +#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80) + +/****************************************************************************** + * Description: + * Calculates crc 8 on a word value: polynomial 0-1-2-8 + * Code was translated from Verilog. + * Return: + *****************************************************************************/ +static inline u8 calc_crc8(u32 data, u8 crc) +{ + u8 D[32]; + u8 NewCRC[8]; + u8 C[8]; + u8 crc_res; + u8 i; + + /* split the data into 31 bits */ + for (i = 0; i < 32; i++) { + D[i] = (u8)(data & 1); + data = data >> 1; + } + + /* split the crc into 8 bits */ + for (i = 0; i < 8; i++) { + C[i] = crc & 1; + crc = crc >> 1; + } + + NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ + D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ + C[6] ^ C[7]; + NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ + D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ + D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ + C[6]; + NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ + D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ + C[0] ^ C[1] ^ C[4] ^ C[5]; + NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ + D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ + C[1] ^ C[2] ^ C[5] ^ C[6]; + NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ + D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ + C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; + NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ + D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ + C[3] ^ C[4] ^ C[7]; + NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ + D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ + C[5]; + NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ + D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ + C[6]; + + crc_res = 0; + for (i = 0; i < 8; i++) + crc_res |= (NewCRC[i] << i); + + return crc_res; +} + + +#endif /* BNX2X_REG_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c new file mode 100644 index 000000000..a9eaaf3e7 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -0,0 +1,6562 @@ +/* bnx2x_sp.c: Qlogic Everest network driver. + * + * Copyright 2011-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * Unless you and Qlogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Qlogic software provided under a + * license other than the GPL, without Qlogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Vladislav Zolotarov + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/crc32.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/crc32c.h> +#include "bnx2x.h" +#include "bnx2x_cmn.h" +#include "bnx2x_sp.h" + +#define BNX2X_MAX_EMUL_MULTI 16 + +/**** Exe Queue interfaces ****/ + +/** + * bnx2x_exe_queue_init - init the Exe Queue object + * + * @o: pointer to the object + * @exe_len: length + * @owner: pointer to the owner + * @validate: validate function pointer + * @optimize: optimize function pointer + * @exec: execute function pointer + * @get: get function pointer + */ +static inline void bnx2x_exe_queue_init(struct bnx2x *bp, + struct bnx2x_exe_queue_obj *o, + int exe_len, + union bnx2x_qable_obj *owner, + exe_q_validate validate, + exe_q_remove remove, + exe_q_optimize optimize, + exe_q_execute exec, + exe_q_get get) +{ + memset(o, 0, sizeof(*o)); + + INIT_LIST_HEAD(&o->exe_queue); + INIT_LIST_HEAD(&o->pending_comp); + + spin_lock_init(&o->lock); + + o->exe_chunk_len = exe_len; + o->owner = owner; + + /* Owner specific callbacks */ + o->validate = validate; + o->remove = remove; + o->optimize = optimize; + o->execute = exec; + o->get = get; + + DP(BNX2X_MSG_SP, "Setup the execution queue with the chunk length of %d\n", + exe_len); +} + +static inline void bnx2x_exe_queue_free_elem(struct bnx2x *bp, + struct bnx2x_exeq_elem *elem) +{ + DP(BNX2X_MSG_SP, "Deleting an exe_queue element\n"); + kfree(elem); +} + +static inline int bnx2x_exe_queue_length(struct bnx2x_exe_queue_obj *o) +{ + struct bnx2x_exeq_elem *elem; + int cnt = 0; + + spin_lock_bh(&o->lock); + + list_for_each_entry(elem, &o->exe_queue, link) + cnt++; + + spin_unlock_bh(&o->lock); + + return cnt; +} + +/** + * bnx2x_exe_queue_add - add a new element to the execution queue + * + * @bp: driver handle + * @o: queue + * @cmd: new command to add + * @restore: true - do not optimize the command + * + * If the element is optimized or is illegal, frees it. + */ +static inline int bnx2x_exe_queue_add(struct bnx2x *bp, + struct bnx2x_exe_queue_obj *o, + struct bnx2x_exeq_elem *elem, + bool restore) +{ + int rc; + + spin_lock_bh(&o->lock); + + if (!restore) { + /* Try to cancel this element queue */ + rc = o->optimize(bp, o->owner, elem); + if (rc) + goto free_and_exit; + + /* Check if this request is ok */ + rc = o->validate(bp, o->owner, elem); + if (rc) { + DP(BNX2X_MSG_SP, "Preamble failed: %d\n", rc); + goto free_and_exit; + } + } + + /* If so, add it to the execution queue */ + list_add_tail(&elem->link, &o->exe_queue); + + spin_unlock_bh(&o->lock); + + return 0; + +free_and_exit: + bnx2x_exe_queue_free_elem(bp, elem); + + spin_unlock_bh(&o->lock); + + return rc; +} + +static inline void __bnx2x_exe_queue_reset_pending( + struct bnx2x *bp, + struct bnx2x_exe_queue_obj *o) +{ + struct bnx2x_exeq_elem *elem; + + while (!list_empty(&o->pending_comp)) { + elem = list_first_entry(&o->pending_comp, + struct bnx2x_exeq_elem, link); + + list_del(&elem->link); + bnx2x_exe_queue_free_elem(bp, elem); + } +} + +/** + * bnx2x_exe_queue_step - execute one execution chunk atomically + * + * @bp: driver handle + * @o: queue + * @ramrod_flags: flags + * + * (Should be called while holding the exe_queue->lock). + */ +static inline int bnx2x_exe_queue_step(struct bnx2x *bp, + struct bnx2x_exe_queue_obj *o, + unsigned long *ramrod_flags) +{ + struct bnx2x_exeq_elem *elem, spacer; + int cur_len = 0, rc; + + memset(&spacer, 0, sizeof(spacer)); + + /* Next step should not be performed until the current is finished, + * unless a DRV_CLEAR_ONLY bit is set. In this case we just want to + * properly clear object internals without sending any command to the FW + * which also implies there won't be any completion to clear the + * 'pending' list. + */ + if (!list_empty(&o->pending_comp)) { + if (test_bit(RAMROD_DRV_CLR_ONLY, ramrod_flags)) { + DP(BNX2X_MSG_SP, "RAMROD_DRV_CLR_ONLY requested: resetting a pending_comp list\n"); + __bnx2x_exe_queue_reset_pending(bp, o); + } else { + return 1; + } + } + + /* Run through the pending commands list and create a next + * execution chunk. + */ + while (!list_empty(&o->exe_queue)) { + elem = list_first_entry(&o->exe_queue, struct bnx2x_exeq_elem, + link); + WARN_ON(!elem->cmd_len); + + if (cur_len + elem->cmd_len <= o->exe_chunk_len) { + cur_len += elem->cmd_len; + /* Prevent from both lists being empty when moving an + * element. This will allow the call of + * bnx2x_exe_queue_empty() without locking. + */ + list_add_tail(&spacer.link, &o->pending_comp); + mb(); + list_move_tail(&elem->link, &o->pending_comp); + list_del(&spacer.link); + } else + break; + } + + /* Sanity check */ + if (!cur_len) + return 0; + + rc = o->execute(bp, o->owner, &o->pending_comp, ramrod_flags); + if (rc < 0) + /* In case of an error return the commands back to the queue + * and reset the pending_comp. + */ + list_splice_init(&o->pending_comp, &o->exe_queue); + else if (!rc) + /* If zero is returned, means there are no outstanding pending + * completions and we may dismiss the pending list. + */ + __bnx2x_exe_queue_reset_pending(bp, o); + + return rc; +} + +static inline bool bnx2x_exe_queue_empty(struct bnx2x_exe_queue_obj *o) +{ + bool empty = list_empty(&o->exe_queue); + + /* Don't reorder!!! */ + mb(); + + return empty && list_empty(&o->pending_comp); +} + +static inline struct bnx2x_exeq_elem *bnx2x_exe_queue_alloc_elem( + struct bnx2x *bp) +{ + DP(BNX2X_MSG_SP, "Allocating a new exe_queue element\n"); + return kzalloc(sizeof(struct bnx2x_exeq_elem), GFP_ATOMIC); +} + +/************************ raw_obj functions ***********************************/ +static bool bnx2x_raw_check_pending(struct bnx2x_raw_obj *o) +{ + return !!test_bit(o->state, o->pstate); +} + +static void bnx2x_raw_clear_pending(struct bnx2x_raw_obj *o) +{ + smp_mb__before_atomic(); + clear_bit(o->state, o->pstate); + smp_mb__after_atomic(); +} + +static void bnx2x_raw_set_pending(struct bnx2x_raw_obj *o) +{ + smp_mb__before_atomic(); + set_bit(o->state, o->pstate); + smp_mb__after_atomic(); +} + +/** + * bnx2x_state_wait - wait until the given bit(state) is cleared + * + * @bp: device handle + * @state: state which is to be cleared + * @state_p: state buffer + * + */ +static inline int bnx2x_state_wait(struct bnx2x *bp, int state, + unsigned long *pstate) +{ + /* can take a while if any port is running */ + int cnt = 5000; + + if (CHIP_REV_IS_EMUL(bp)) + cnt *= 20; + + DP(BNX2X_MSG_SP, "waiting for state to become %d\n", state); + + might_sleep(); + while (cnt--) { + if (!test_bit(state, pstate)) { +#ifdef BNX2X_STOP_ON_ERROR + DP(BNX2X_MSG_SP, "exit (cnt %d)\n", 5000 - cnt); +#endif + return 0; + } + + usleep_range(1000, 2000); + + if (bp->panic) + return -EIO; + } + + /* timeout! */ + BNX2X_ERR("timeout waiting for state %d\n", state); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + + return -EBUSY; +} + +static int bnx2x_raw_wait(struct bnx2x *bp, struct bnx2x_raw_obj *raw) +{ + return bnx2x_state_wait(bp, raw->state, raw->pstate); +} + +/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/ +/* credit handling callbacks */ +static bool bnx2x_get_cam_offset_mac(struct bnx2x_vlan_mac_obj *o, int *offset) +{ + struct bnx2x_credit_pool_obj *mp = o->macs_pool; + + WARN_ON(!mp); + + return mp->get_entry(mp, offset); +} + +static bool bnx2x_get_credit_mac(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_credit_pool_obj *mp = o->macs_pool; + + WARN_ON(!mp); + + return mp->get(mp, 1); +} + +static bool bnx2x_get_cam_offset_vlan(struct bnx2x_vlan_mac_obj *o, int *offset) +{ + struct bnx2x_credit_pool_obj *vp = o->vlans_pool; + + WARN_ON(!vp); + + return vp->get_entry(vp, offset); +} + +static bool bnx2x_get_credit_vlan(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_credit_pool_obj *vp = o->vlans_pool; + + WARN_ON(!vp); + + return vp->get(vp, 1); +} + +static bool bnx2x_get_credit_vlan_mac(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_credit_pool_obj *mp = o->macs_pool; + struct bnx2x_credit_pool_obj *vp = o->vlans_pool; + + if (!mp->get(mp, 1)) + return false; + + if (!vp->get(vp, 1)) { + mp->put(mp, 1); + return false; + } + + return true; +} + +static bool bnx2x_put_cam_offset_mac(struct bnx2x_vlan_mac_obj *o, int offset) +{ + struct bnx2x_credit_pool_obj *mp = o->macs_pool; + + return mp->put_entry(mp, offset); +} + +static bool bnx2x_put_credit_mac(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_credit_pool_obj *mp = o->macs_pool; + + return mp->put(mp, 1); +} + +static bool bnx2x_put_cam_offset_vlan(struct bnx2x_vlan_mac_obj *o, int offset) +{ + struct bnx2x_credit_pool_obj *vp = o->vlans_pool; + + return vp->put_entry(vp, offset); +} + +static bool bnx2x_put_credit_vlan(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_credit_pool_obj *vp = o->vlans_pool; + + return vp->put(vp, 1); +} + +static bool bnx2x_put_credit_vlan_mac(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_credit_pool_obj *mp = o->macs_pool; + struct bnx2x_credit_pool_obj *vp = o->vlans_pool; + + if (!mp->put(mp, 1)) + return false; + + if (!vp->put(vp, 1)) { + mp->get(mp, 1); + return false; + } + + return true; +} + +/** + * __bnx2x_vlan_mac_h_write_trylock - try getting the vlan mac writer lock + * + * @bp: device handle + * @o: vlan_mac object + * + * @details: Non-blocking implementation; should be called under execution + * queue lock. + */ +static int __bnx2x_vlan_mac_h_write_trylock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + if (o->head_reader) { + DP(BNX2X_MSG_SP, "vlan_mac_lock writer - There are readers; Busy\n"); + return -EBUSY; + } + + DP(BNX2X_MSG_SP, "vlan_mac_lock writer - Taken\n"); + return 0; +} + +/** + * __bnx2x_vlan_mac_h_exec_pending - execute step instead of a previous step + * + * @bp: device handle + * @o: vlan_mac object + * + * @details Should be called under execution queue lock; notice it might release + * and reclaim it during its run. + */ +static void __bnx2x_vlan_mac_h_exec_pending(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + int rc; + unsigned long ramrod_flags = o->saved_ramrod_flags; + + DP(BNX2X_MSG_SP, "vlan_mac_lock execute pending command with ramrod flags %lu\n", + ramrod_flags); + o->head_exe_request = false; + o->saved_ramrod_flags = 0; + rc = bnx2x_exe_queue_step(bp, &o->exe_queue, &ramrod_flags); + if ((rc != 0) && (rc != 1)) { + BNX2X_ERR("execution of pending commands failed with rc %d\n", + rc); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + } +} + +/** + * __bnx2x_vlan_mac_h_pend - Pend an execution step which couldn't run + * + * @bp: device handle + * @o: vlan_mac object + * @ramrod_flags: ramrod flags of missed execution + * + * @details Should be called under execution queue lock. + */ +static void __bnx2x_vlan_mac_h_pend(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + unsigned long ramrod_flags) +{ + o->head_exe_request = true; + o->saved_ramrod_flags = ramrod_flags; + DP(BNX2X_MSG_SP, "Placing pending execution with ramrod flags %lu\n", + ramrod_flags); +} + +/** + * __bnx2x_vlan_mac_h_write_unlock - unlock the vlan mac head list writer lock + * + * @bp: device handle + * @o: vlan_mac object + * + * @details Should be called under execution queue lock. Notice if a pending + * execution exists, it would perform it - possibly releasing and + * reclaiming the execution queue lock. + */ +static void __bnx2x_vlan_mac_h_write_unlock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + /* It's possible a new pending execution was added since this writer + * executed. If so, execute again. [Ad infinitum] + */ + while (o->head_exe_request) { + DP(BNX2X_MSG_SP, "vlan_mac_lock - writer release encountered a pending request\n"); + __bnx2x_vlan_mac_h_exec_pending(bp, o); + } +} + + +/** + * __bnx2x_vlan_mac_h_read_lock - lock the vlan mac head list reader lock + * + * @bp: device handle + * @o: vlan_mac object + * + * @details Should be called under the execution queue lock. May sleep. May + * release and reclaim execution queue lock during its run. + */ +static int __bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + /* If we got here, we're holding lock --> no WRITER exists */ + o->head_reader++; + DP(BNX2X_MSG_SP, "vlan_mac_lock - locked reader - number %d\n", + o->head_reader); + + return 0; +} + +/** + * bnx2x_vlan_mac_h_read_lock - lock the vlan mac head list reader lock + * + * @bp: device handle + * @o: vlan_mac object + * + * @details May sleep. Claims and releases execution queue lock during its run. + */ +int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + int rc; + + spin_lock_bh(&o->exe_queue.lock); + rc = __bnx2x_vlan_mac_h_read_lock(bp, o); + spin_unlock_bh(&o->exe_queue.lock); + + return rc; +} + +/** + * __bnx2x_vlan_mac_h_read_unlock - unlock the vlan mac head list reader lock + * + * @bp: device handle + * @o: vlan_mac object + * + * @details Should be called under execution queue lock. Notice if a pending + * execution exists, it would be performed if this was the last + * reader. possibly releasing and reclaiming the execution queue lock. + */ +static void __bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + if (!o->head_reader) { + BNX2X_ERR("Need to release vlan mac reader lock, but lock isn't taken\n"); +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#endif + } else { + o->head_reader--; + DP(BNX2X_MSG_SP, "vlan_mac_lock - decreased readers to %d\n", + o->head_reader); + } + + /* It's possible a new pending execution was added, and that this reader + * was last - if so we need to execute the command. + */ + if (!o->head_reader && o->head_exe_request) { + DP(BNX2X_MSG_SP, "vlan_mac_lock - reader release encountered a pending request\n"); + + /* Writer release will do the trick */ + __bnx2x_vlan_mac_h_write_unlock(bp, o); + } +} + +/** + * bnx2x_vlan_mac_h_read_unlock - unlock the vlan mac head list reader lock + * + * @bp: device handle + * @o: vlan_mac object + * + * @details Notice if a pending execution exists, it would be performed if this + * was the last reader. Claims and releases the execution queue lock + * during its run. + */ +void bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + spin_lock_bh(&o->exe_queue.lock); + __bnx2x_vlan_mac_h_read_unlock(bp, o); + spin_unlock_bh(&o->exe_queue.lock); +} + +static int bnx2x_get_n_elements(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, + int n, u8 *base, u8 stride, u8 size) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + u8 *next = base; + int counter = 0; + int read_lock; + + DP(BNX2X_MSG_SP, "get_n_elements - taking vlan_mac_lock (reader)\n"); + read_lock = bnx2x_vlan_mac_h_read_lock(bp, o); + if (read_lock != 0) + BNX2X_ERR("get_n_elements failed to get vlan mac reader lock; Access without lock\n"); + + /* traverse list */ + list_for_each_entry(pos, &o->head, link) { + if (counter < n) { + memcpy(next, &pos->u, size); + counter++; + DP(BNX2X_MSG_SP, "copied element number %d to address %p element was:\n", + counter, next); + next += stride + size; + } + } + + if (read_lock == 0) { + DP(BNX2X_MSG_SP, "get_n_elements - releasing vlan_mac_lock (reader)\n"); + bnx2x_vlan_mac_h_read_unlock(bp, o); + } + + return counter * ETH_ALEN; +} + +/* check_add() callbacks */ +static int bnx2x_check_mac_add(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + + DP(BNX2X_MSG_SP, "Checking MAC %pM for ADD command\n", data->mac.mac); + + if (!is_valid_ether_addr(data->mac.mac)) + return -EINVAL; + + /* Check if a requested MAC already exists */ + list_for_each_entry(pos, &o->head, link) + if (ether_addr_equal(data->mac.mac, pos->u.mac.mac) && + (data->mac.is_inner_mac == pos->u.mac.is_inner_mac)) + return -EEXIST; + + return 0; +} + +static int bnx2x_check_vlan_add(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + + DP(BNX2X_MSG_SP, "Checking VLAN %d for ADD command\n", data->vlan.vlan); + + list_for_each_entry(pos, &o->head, link) + if (data->vlan.vlan == pos->u.vlan.vlan) + return -EEXIST; + + return 0; +} + +static int bnx2x_check_vlan_mac_add(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + + DP(BNX2X_MSG_SP, "Checking VLAN_MAC (%pM, %d) for ADD command\n", + data->vlan_mac.mac, data->vlan_mac.vlan); + + list_for_each_entry(pos, &o->head, link) + if ((data->vlan_mac.vlan == pos->u.vlan_mac.vlan) && + (!memcmp(data->vlan_mac.mac, pos->u.vlan_mac.mac, + ETH_ALEN)) && + (data->vlan_mac.is_inner_mac == + pos->u.vlan_mac.is_inner_mac)) + return -EEXIST; + + return 0; +} + +/* check_del() callbacks */ +static struct bnx2x_vlan_mac_registry_elem * + bnx2x_check_mac_del(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + + DP(BNX2X_MSG_SP, "Checking MAC %pM for DEL command\n", data->mac.mac); + + list_for_each_entry(pos, &o->head, link) + if (ether_addr_equal(data->mac.mac, pos->u.mac.mac) && + (data->mac.is_inner_mac == pos->u.mac.is_inner_mac)) + return pos; + + return NULL; +} + +static struct bnx2x_vlan_mac_registry_elem * + bnx2x_check_vlan_del(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + + DP(BNX2X_MSG_SP, "Checking VLAN %d for DEL command\n", data->vlan.vlan); + + list_for_each_entry(pos, &o->head, link) + if (data->vlan.vlan == pos->u.vlan.vlan) + return pos; + + return NULL; +} + +static struct bnx2x_vlan_mac_registry_elem * + bnx2x_check_vlan_mac_del(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + + DP(BNX2X_MSG_SP, "Checking VLAN_MAC (%pM, %d) for DEL command\n", + data->vlan_mac.mac, data->vlan_mac.vlan); + + list_for_each_entry(pos, &o->head, link) + if ((data->vlan_mac.vlan == pos->u.vlan_mac.vlan) && + (!memcmp(data->vlan_mac.mac, pos->u.vlan_mac.mac, + ETH_ALEN)) && + (data->vlan_mac.is_inner_mac == + pos->u.vlan_mac.is_inner_mac)) + return pos; + + return NULL; +} + +/* check_move() callback */ +static bool bnx2x_check_move(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *src_o, + struct bnx2x_vlan_mac_obj *dst_o, + union bnx2x_classification_ramrod_data *data) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + int rc; + + /* Check if we can delete the requested configuration from the first + * object. + */ + pos = src_o->check_del(bp, src_o, data); + + /* check if configuration can be added */ + rc = dst_o->check_add(bp, dst_o, data); + + /* If this classification can not be added (is already set) + * or can't be deleted - return an error. + */ + if (rc || !pos) + return false; + + return true; +} + +static bool bnx2x_check_move_always_err( + struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *src_o, + struct bnx2x_vlan_mac_obj *dst_o, + union bnx2x_classification_ramrod_data *data) +{ + return false; +} + +static inline u8 bnx2x_vlan_mac_get_rx_tx_flag(struct bnx2x_vlan_mac_obj *o) +{ + struct bnx2x_raw_obj *raw = &o->raw; + u8 rx_tx_flag = 0; + + if ((raw->obj_type == BNX2X_OBJ_TYPE_TX) || + (raw->obj_type == BNX2X_OBJ_TYPE_RX_TX)) + rx_tx_flag |= ETH_CLASSIFY_CMD_HEADER_TX_CMD; + + if ((raw->obj_type == BNX2X_OBJ_TYPE_RX) || + (raw->obj_type == BNX2X_OBJ_TYPE_RX_TX)) + rx_tx_flag |= ETH_CLASSIFY_CMD_HEADER_RX_CMD; + + return rx_tx_flag; +} + +static void bnx2x_set_mac_in_nig(struct bnx2x *bp, + bool add, unsigned char *dev_addr, int index) +{ + u32 wb_data[2]; + u32 reg_offset = BP_PORT(bp) ? NIG_REG_LLH1_FUNC_MEM : + NIG_REG_LLH0_FUNC_MEM; + + if (!IS_MF_SI(bp) && !IS_MF_AFEX(bp)) + return; + + if (index > BNX2X_LLH_CAM_MAX_PF_LINE) + return; + + DP(BNX2X_MSG_SP, "Going to %s LLH configuration at entry %d\n", + (add ? "ADD" : "DELETE"), index); + + if (add) { + /* LLH_FUNC_MEM is a u64 WB register */ + reg_offset += 8*index; + + wb_data[0] = ((dev_addr[2] << 24) | (dev_addr[3] << 16) | + (dev_addr[4] << 8) | dev_addr[5]); + wb_data[1] = ((dev_addr[0] << 8) | dev_addr[1]); + + REG_WR_DMAE(bp, reg_offset, wb_data, 2); + } + + REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_FUNC_MEM_ENABLE : + NIG_REG_LLH0_FUNC_MEM_ENABLE) + 4*index, add); +} + +/** + * bnx2x_vlan_mac_set_cmd_hdr_e2 - set a header in a single classify ramrod + * + * @bp: device handle + * @o: queue for which we want to configure this rule + * @add: if true the command is an ADD command, DEL otherwise + * @opcode: CLASSIFY_RULE_OPCODE_XXX + * @hdr: pointer to a header to setup + * + */ +static inline void bnx2x_vlan_mac_set_cmd_hdr_e2(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, bool add, int opcode, + struct eth_classify_cmd_header *hdr) +{ + struct bnx2x_raw_obj *raw = &o->raw; + + hdr->client_id = raw->cl_id; + hdr->func_id = raw->func_id; + + /* Rx or/and Tx (internal switching) configuration ? */ + hdr->cmd_general_data |= + bnx2x_vlan_mac_get_rx_tx_flag(o); + + if (add) + hdr->cmd_general_data |= ETH_CLASSIFY_CMD_HEADER_IS_ADD; + + hdr->cmd_general_data |= + (opcode << ETH_CLASSIFY_CMD_HEADER_OPCODE_SHIFT); +} + +/** + * bnx2x_vlan_mac_set_rdata_hdr_e2 - set the classify ramrod data header + * + * @cid: connection id + * @type: BNX2X_FILTER_XXX_PENDING + * @hdr: pointer to header to setup + * @rule_cnt: + * + * currently we always configure one rule and echo field to contain a CID and an + * opcode type. + */ +static inline void bnx2x_vlan_mac_set_rdata_hdr_e2(u32 cid, int type, + struct eth_classify_header *hdr, int rule_cnt) +{ + hdr->echo = cpu_to_le32((cid & BNX2X_SWCID_MASK) | + (type << BNX2X_SWCID_SHIFT)); + hdr->rule_cnt = (u8)rule_cnt; +} + +/* hw_config() callbacks */ +static void bnx2x_set_one_mac_e2(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, int rule_idx, + int cam_offset) +{ + struct bnx2x_raw_obj *raw = &o->raw; + struct eth_classify_rules_ramrod_data *data = + (struct eth_classify_rules_ramrod_data *)(raw->rdata); + int rule_cnt = rule_idx + 1, cmd = elem->cmd_data.vlan_mac.cmd; + union eth_classify_rule_cmd *rule_entry = &data->rules[rule_idx]; + bool add = (cmd == BNX2X_VLAN_MAC_ADD) ? true : false; + unsigned long *vlan_mac_flags = &elem->cmd_data.vlan_mac.vlan_mac_flags; + u8 *mac = elem->cmd_data.vlan_mac.u.mac.mac; + + /* Set LLH CAM entry: currently only iSCSI and ETH macs are + * relevant. In addition, current implementation is tuned for a + * single ETH MAC. + * + * When multiple unicast ETH MACs PF configuration in switch + * independent mode is required (NetQ, multiple netdev MACs, + * etc.), consider better utilisation of 8 per function MAC + * entries in the LLH register. There is also + * NIG_REG_P[01]_LLH_FUNC_MEM2 registers that complete the + * total number of CAM entries to 16. + * + * Currently we won't configure NIG for MACs other than a primary ETH + * MAC and iSCSI L2 MAC. + * + * If this MAC is moving from one Queue to another, no need to change + * NIG configuration. + */ + if (cmd != BNX2X_VLAN_MAC_MOVE) { + if (test_bit(BNX2X_ISCSI_ETH_MAC, vlan_mac_flags)) + bnx2x_set_mac_in_nig(bp, add, mac, + BNX2X_LLH_CAM_ISCSI_ETH_LINE); + else if (test_bit(BNX2X_ETH_MAC, vlan_mac_flags)) + bnx2x_set_mac_in_nig(bp, add, mac, + BNX2X_LLH_CAM_ETH_LINE); + } + + /* Reset the ramrod data buffer for the first rule */ + if (rule_idx == 0) + memset(data, 0, sizeof(*data)); + + /* Setup a command header */ + bnx2x_vlan_mac_set_cmd_hdr_e2(bp, o, add, CLASSIFY_RULE_OPCODE_MAC, + &rule_entry->mac.header); + + DP(BNX2X_MSG_SP, "About to %s MAC %pM for Queue %d\n", + (add ? "add" : "delete"), mac, raw->cl_id); + + /* Set a MAC itself */ + bnx2x_set_fw_mac_addr(&rule_entry->mac.mac_msb, + &rule_entry->mac.mac_mid, + &rule_entry->mac.mac_lsb, mac); + rule_entry->mac.inner_mac = + cpu_to_le16(elem->cmd_data.vlan_mac.u.mac.is_inner_mac); + + /* MOVE: Add a rule that will add this MAC to the target Queue */ + if (cmd == BNX2X_VLAN_MAC_MOVE) { + rule_entry++; + rule_cnt++; + + /* Setup ramrod data */ + bnx2x_vlan_mac_set_cmd_hdr_e2(bp, + elem->cmd_data.vlan_mac.target_obj, + true, CLASSIFY_RULE_OPCODE_MAC, + &rule_entry->mac.header); + + /* Set a MAC itself */ + bnx2x_set_fw_mac_addr(&rule_entry->mac.mac_msb, + &rule_entry->mac.mac_mid, + &rule_entry->mac.mac_lsb, mac); + rule_entry->mac.inner_mac = + cpu_to_le16(elem->cmd_data.vlan_mac. + u.mac.is_inner_mac); + } + + /* Set the ramrod data header */ + /* TODO: take this to the higher level in order to prevent multiple + writing */ + bnx2x_vlan_mac_set_rdata_hdr_e2(raw->cid, raw->state, &data->header, + rule_cnt); +} + +/** + * bnx2x_vlan_mac_set_rdata_hdr_e1x - set a header in a single classify ramrod + * + * @bp: device handle + * @o: queue + * @type: + * @cam_offset: offset in cam memory + * @hdr: pointer to a header to setup + * + * E1/E1H + */ +static inline void bnx2x_vlan_mac_set_rdata_hdr_e1x(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, int type, int cam_offset, + struct mac_configuration_hdr *hdr) +{ + struct bnx2x_raw_obj *r = &o->raw; + + hdr->length = 1; + hdr->offset = (u8)cam_offset; + hdr->client_id = cpu_to_le16(0xff); + hdr->echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (type << BNX2X_SWCID_SHIFT)); +} + +static inline void bnx2x_vlan_mac_set_cfg_entry_e1x(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, bool add, int opcode, u8 *mac, + u16 vlan_id, struct mac_configuration_entry *cfg_entry) +{ + struct bnx2x_raw_obj *r = &o->raw; + u32 cl_bit_vec = (1 << r->cl_id); + + cfg_entry->clients_bit_vector = cpu_to_le32(cl_bit_vec); + cfg_entry->pf_id = r->func_id; + cfg_entry->vlan_id = cpu_to_le16(vlan_id); + + if (add) { + SET_FLAG(cfg_entry->flags, MAC_CONFIGURATION_ENTRY_ACTION_TYPE, + T_ETH_MAC_COMMAND_SET); + SET_FLAG(cfg_entry->flags, + MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE, opcode); + + /* Set a MAC in a ramrod data */ + bnx2x_set_fw_mac_addr(&cfg_entry->msb_mac_addr, + &cfg_entry->middle_mac_addr, + &cfg_entry->lsb_mac_addr, mac); + } else + SET_FLAG(cfg_entry->flags, MAC_CONFIGURATION_ENTRY_ACTION_TYPE, + T_ETH_MAC_COMMAND_INVALIDATE); +} + +static inline void bnx2x_vlan_mac_set_rdata_e1x(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, int type, int cam_offset, bool add, + u8 *mac, u16 vlan_id, int opcode, struct mac_configuration_cmd *config) +{ + struct mac_configuration_entry *cfg_entry = &config->config_table[0]; + struct bnx2x_raw_obj *raw = &o->raw; + + bnx2x_vlan_mac_set_rdata_hdr_e1x(bp, o, type, cam_offset, + &config->hdr); + bnx2x_vlan_mac_set_cfg_entry_e1x(bp, o, add, opcode, mac, vlan_id, + cfg_entry); + + DP(BNX2X_MSG_SP, "%s MAC %pM CLID %d CAM offset %d\n", + (add ? "setting" : "clearing"), + mac, raw->cl_id, cam_offset); +} + +/** + * bnx2x_set_one_mac_e1x - fill a single MAC rule ramrod data + * + * @bp: device handle + * @o: bnx2x_vlan_mac_obj + * @elem: bnx2x_exeq_elem + * @rule_idx: rule_idx + * @cam_offset: cam_offset + */ +static void bnx2x_set_one_mac_e1x(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, int rule_idx, + int cam_offset) +{ + struct bnx2x_raw_obj *raw = &o->raw; + struct mac_configuration_cmd *config = + (struct mac_configuration_cmd *)(raw->rdata); + /* 57710 and 57711 do not support MOVE command, + * so it's either ADD or DEL + */ + bool add = (elem->cmd_data.vlan_mac.cmd == BNX2X_VLAN_MAC_ADD) ? + true : false; + + /* Reset the ramrod data buffer */ + memset(config, 0, sizeof(*config)); + + bnx2x_vlan_mac_set_rdata_e1x(bp, o, raw->state, + cam_offset, add, + elem->cmd_data.vlan_mac.u.mac.mac, 0, + ETH_VLAN_FILTER_ANY_VLAN, config); +} + +static void bnx2x_set_one_vlan_e2(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, int rule_idx, + int cam_offset) +{ + struct bnx2x_raw_obj *raw = &o->raw; + struct eth_classify_rules_ramrod_data *data = + (struct eth_classify_rules_ramrod_data *)(raw->rdata); + int rule_cnt = rule_idx + 1; + union eth_classify_rule_cmd *rule_entry = &data->rules[rule_idx]; + enum bnx2x_vlan_mac_cmd cmd = elem->cmd_data.vlan_mac.cmd; + bool add = (cmd == BNX2X_VLAN_MAC_ADD) ? true : false; + u16 vlan = elem->cmd_data.vlan_mac.u.vlan.vlan; + + /* Reset the ramrod data buffer for the first rule */ + if (rule_idx == 0) + memset(data, 0, sizeof(*data)); + + /* Set a rule header */ + bnx2x_vlan_mac_set_cmd_hdr_e2(bp, o, add, CLASSIFY_RULE_OPCODE_VLAN, + &rule_entry->vlan.header); + + DP(BNX2X_MSG_SP, "About to %s VLAN %d\n", (add ? "add" : "delete"), + vlan); + + /* Set a VLAN itself */ + rule_entry->vlan.vlan = cpu_to_le16(vlan); + + /* MOVE: Add a rule that will add this MAC to the target Queue */ + if (cmd == BNX2X_VLAN_MAC_MOVE) { + rule_entry++; + rule_cnt++; + + /* Setup ramrod data */ + bnx2x_vlan_mac_set_cmd_hdr_e2(bp, + elem->cmd_data.vlan_mac.target_obj, + true, CLASSIFY_RULE_OPCODE_VLAN, + &rule_entry->vlan.header); + + /* Set a VLAN itself */ + rule_entry->vlan.vlan = cpu_to_le16(vlan); + } + + /* Set the ramrod data header */ + /* TODO: take this to the higher level in order to prevent multiple + writing */ + bnx2x_vlan_mac_set_rdata_hdr_e2(raw->cid, raw->state, &data->header, + rule_cnt); +} + +static void bnx2x_set_one_vlan_mac_e2(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, + int rule_idx, int cam_offset) +{ + struct bnx2x_raw_obj *raw = &o->raw; + struct eth_classify_rules_ramrod_data *data = + (struct eth_classify_rules_ramrod_data *)(raw->rdata); + int rule_cnt = rule_idx + 1; + union eth_classify_rule_cmd *rule_entry = &data->rules[rule_idx]; + enum bnx2x_vlan_mac_cmd cmd = elem->cmd_data.vlan_mac.cmd; + bool add = (cmd == BNX2X_VLAN_MAC_ADD) ? true : false; + u16 vlan = elem->cmd_data.vlan_mac.u.vlan_mac.vlan; + u8 *mac = elem->cmd_data.vlan_mac.u.vlan_mac.mac; + u16 inner_mac; + + /* Reset the ramrod data buffer for the first rule */ + if (rule_idx == 0) + memset(data, 0, sizeof(*data)); + + /* Set a rule header */ + bnx2x_vlan_mac_set_cmd_hdr_e2(bp, o, add, CLASSIFY_RULE_OPCODE_PAIR, + &rule_entry->pair.header); + + /* Set VLAN and MAC themselves */ + rule_entry->pair.vlan = cpu_to_le16(vlan); + bnx2x_set_fw_mac_addr(&rule_entry->pair.mac_msb, + &rule_entry->pair.mac_mid, + &rule_entry->pair.mac_lsb, mac); + inner_mac = elem->cmd_data.vlan_mac.u.vlan_mac.is_inner_mac; + rule_entry->pair.inner_mac = cpu_to_le16(inner_mac); + /* MOVE: Add a rule that will add this MAC/VLAN to the target Queue */ + if (cmd == BNX2X_VLAN_MAC_MOVE) { + struct bnx2x_vlan_mac_obj *target_obj; + + rule_entry++; + rule_cnt++; + + /* Setup ramrod data */ + target_obj = elem->cmd_data.vlan_mac.target_obj; + bnx2x_vlan_mac_set_cmd_hdr_e2(bp, target_obj, + true, CLASSIFY_RULE_OPCODE_PAIR, + &rule_entry->pair.header); + + /* Set a VLAN itself */ + rule_entry->pair.vlan = cpu_to_le16(vlan); + bnx2x_set_fw_mac_addr(&rule_entry->pair.mac_msb, + &rule_entry->pair.mac_mid, + &rule_entry->pair.mac_lsb, mac); + rule_entry->pair.inner_mac = cpu_to_le16(inner_mac); + } + + /* Set the ramrod data header */ + bnx2x_vlan_mac_set_rdata_hdr_e2(raw->cid, raw->state, &data->header, + rule_cnt); +} + +/** + * bnx2x_set_one_vlan_mac_e1h - + * + * @bp: device handle + * @o: bnx2x_vlan_mac_obj + * @elem: bnx2x_exeq_elem + * @rule_idx: rule_idx + * @cam_offset: cam_offset + */ +static void bnx2x_set_one_vlan_mac_e1h(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, + int rule_idx, int cam_offset) +{ + struct bnx2x_raw_obj *raw = &o->raw; + struct mac_configuration_cmd *config = + (struct mac_configuration_cmd *)(raw->rdata); + /* 57710 and 57711 do not support MOVE command, + * so it's either ADD or DEL + */ + bool add = (elem->cmd_data.vlan_mac.cmd == BNX2X_VLAN_MAC_ADD) ? + true : false; + + /* Reset the ramrod data buffer */ + memset(config, 0, sizeof(*config)); + + bnx2x_vlan_mac_set_rdata_e1x(bp, o, BNX2X_FILTER_VLAN_MAC_PENDING, + cam_offset, add, + elem->cmd_data.vlan_mac.u.vlan_mac.mac, + elem->cmd_data.vlan_mac.u.vlan_mac.vlan, + ETH_VLAN_FILTER_CLASSIFY, config); +} + +/** + * bnx2x_vlan_mac_restore - reconfigure next MAC/VLAN/VLAN-MAC element + * + * @bp: device handle + * @p: command parameters + * @ppos: pointer to the cookie + * + * reconfigure next MAC/VLAN/VLAN-MAC element from the + * previously configured elements list. + * + * from command parameters only RAMROD_COMP_WAIT bit in ramrod_flags is taken + * into an account + * + * pointer to the cookie - that should be given back in the next call to make + * function handle the next element. If *ppos is set to NULL it will restart the + * iterator. If returned *ppos == NULL this means that the last element has been + * handled. + * + */ +static int bnx2x_vlan_mac_restore(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p, + struct bnx2x_vlan_mac_registry_elem **ppos) +{ + struct bnx2x_vlan_mac_registry_elem *pos; + struct bnx2x_vlan_mac_obj *o = p->vlan_mac_obj; + + /* If list is empty - there is nothing to do here */ + if (list_empty(&o->head)) { + *ppos = NULL; + return 0; + } + + /* make a step... */ + if (*ppos == NULL) + *ppos = list_first_entry(&o->head, + struct bnx2x_vlan_mac_registry_elem, + link); + else + *ppos = list_next_entry(*ppos, link); + + pos = *ppos; + + /* If it's the last step - return NULL */ + if (list_is_last(&pos->link, &o->head)) + *ppos = NULL; + + /* Prepare a 'user_req' */ + memcpy(&p->user_req.u, &pos->u, sizeof(pos->u)); + + /* Set the command */ + p->user_req.cmd = BNX2X_VLAN_MAC_ADD; + + /* Set vlan_mac_flags */ + p->user_req.vlan_mac_flags = pos->vlan_mac_flags; + + /* Set a restore bit */ + __set_bit(RAMROD_RESTORE, &p->ramrod_flags); + + return bnx2x_config_vlan_mac(bp, p); +} + +/* bnx2x_exeq_get_mac/bnx2x_exeq_get_vlan/bnx2x_exeq_get_vlan_mac return a + * pointer to an element with a specific criteria and NULL if such an element + * hasn't been found. + */ +static struct bnx2x_exeq_elem *bnx2x_exeq_get_mac( + struct bnx2x_exe_queue_obj *o, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_exeq_elem *pos; + struct bnx2x_mac_ramrod_data *data = &elem->cmd_data.vlan_mac.u.mac; + + /* Check pending for execution commands */ + list_for_each_entry(pos, &o->exe_queue, link) + if (!memcmp(&pos->cmd_data.vlan_mac.u.mac, data, + sizeof(*data)) && + (pos->cmd_data.vlan_mac.cmd == elem->cmd_data.vlan_mac.cmd)) + return pos; + + return NULL; +} + +static struct bnx2x_exeq_elem *bnx2x_exeq_get_vlan( + struct bnx2x_exe_queue_obj *o, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_exeq_elem *pos; + struct bnx2x_vlan_ramrod_data *data = &elem->cmd_data.vlan_mac.u.vlan; + + /* Check pending for execution commands */ + list_for_each_entry(pos, &o->exe_queue, link) + if (!memcmp(&pos->cmd_data.vlan_mac.u.vlan, data, + sizeof(*data)) && + (pos->cmd_data.vlan_mac.cmd == elem->cmd_data.vlan_mac.cmd)) + return pos; + + return NULL; +} + +static struct bnx2x_exeq_elem *bnx2x_exeq_get_vlan_mac( + struct bnx2x_exe_queue_obj *o, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_exeq_elem *pos; + struct bnx2x_vlan_mac_ramrod_data *data = + &elem->cmd_data.vlan_mac.u.vlan_mac; + + /* Check pending for execution commands */ + list_for_each_entry(pos, &o->exe_queue, link) + if (!memcmp(&pos->cmd_data.vlan_mac.u.vlan_mac, data, + sizeof(*data)) && + (pos->cmd_data.vlan_mac.cmd == + elem->cmd_data.vlan_mac.cmd)) + return pos; + + return NULL; +} + +/** + * bnx2x_validate_vlan_mac_add - check if an ADD command can be executed + * + * @bp: device handle + * @qo: bnx2x_qable_obj + * @elem: bnx2x_exeq_elem + * + * Checks that the requested configuration can be added. If yes and if + * requested, consume CAM credit. + * + * The 'validate' is run after the 'optimize'. + * + */ +static inline int bnx2x_validate_vlan_mac_add(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_vlan_mac_obj *o = &qo->vlan_mac; + struct bnx2x_exe_queue_obj *exeq = &o->exe_queue; + int rc; + + /* Check the registry */ + rc = o->check_add(bp, o, &elem->cmd_data.vlan_mac.u); + if (rc) { + DP(BNX2X_MSG_SP, "ADD command is not allowed considering current registry state.\n"); + return rc; + } + + /* Check if there is a pending ADD command for this + * MAC/VLAN/VLAN-MAC. Return an error if there is. + */ + if (exeq->get(exeq, elem)) { + DP(BNX2X_MSG_SP, "There is a pending ADD command already\n"); + return -EEXIST; + } + + /* TODO: Check the pending MOVE from other objects where this + * object is a destination object. + */ + + /* Consume the credit if not requested not to */ + if (!(test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &elem->cmd_data.vlan_mac.vlan_mac_flags) || + o->get_credit(o))) + return -EINVAL; + + return 0; +} + +/** + * bnx2x_validate_vlan_mac_del - check if the DEL command can be executed + * + * @bp: device handle + * @qo: quable object to check + * @elem: element that needs to be deleted + * + * Checks that the requested configuration can be deleted. If yes and if + * requested, returns a CAM credit. + * + * The 'validate' is run after the 'optimize'. + */ +static inline int bnx2x_validate_vlan_mac_del(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_vlan_mac_obj *o = &qo->vlan_mac; + struct bnx2x_vlan_mac_registry_elem *pos; + struct bnx2x_exe_queue_obj *exeq = &o->exe_queue; + struct bnx2x_exeq_elem query_elem; + + /* If this classification can not be deleted (doesn't exist) + * - return a BNX2X_EXIST. + */ + pos = o->check_del(bp, o, &elem->cmd_data.vlan_mac.u); + if (!pos) { + DP(BNX2X_MSG_SP, "DEL command is not allowed considering current registry state\n"); + return -EEXIST; + } + + /* Check if there are pending DEL or MOVE commands for this + * MAC/VLAN/VLAN-MAC. Return an error if so. + */ + memcpy(&query_elem, elem, sizeof(query_elem)); + + /* Check for MOVE commands */ + query_elem.cmd_data.vlan_mac.cmd = BNX2X_VLAN_MAC_MOVE; + if (exeq->get(exeq, &query_elem)) { + BNX2X_ERR("There is a pending MOVE command already\n"); + return -EINVAL; + } + + /* Check for DEL commands */ + if (exeq->get(exeq, elem)) { + DP(BNX2X_MSG_SP, "There is a pending DEL command already\n"); + return -EEXIST; + } + + /* Return the credit to the credit pool if not requested not to */ + if (!(test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &elem->cmd_data.vlan_mac.vlan_mac_flags) || + o->put_credit(o))) { + BNX2X_ERR("Failed to return a credit\n"); + return -EINVAL; + } + + return 0; +} + +/** + * bnx2x_validate_vlan_mac_move - check if the MOVE command can be executed + * + * @bp: device handle + * @qo: quable object to check (source) + * @elem: element that needs to be moved + * + * Checks that the requested configuration can be moved. If yes and if + * requested, returns a CAM credit. + * + * The 'validate' is run after the 'optimize'. + */ +static inline int bnx2x_validate_vlan_mac_move(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_vlan_mac_obj *src_o = &qo->vlan_mac; + struct bnx2x_vlan_mac_obj *dest_o = elem->cmd_data.vlan_mac.target_obj; + struct bnx2x_exeq_elem query_elem; + struct bnx2x_exe_queue_obj *src_exeq = &src_o->exe_queue; + struct bnx2x_exe_queue_obj *dest_exeq = &dest_o->exe_queue; + + /* Check if we can perform this operation based on the current registry + * state. + */ + if (!src_o->check_move(bp, src_o, dest_o, + &elem->cmd_data.vlan_mac.u)) { + DP(BNX2X_MSG_SP, "MOVE command is not allowed considering current registry state\n"); + return -EINVAL; + } + + /* Check if there is an already pending DEL or MOVE command for the + * source object or ADD command for a destination object. Return an + * error if so. + */ + memcpy(&query_elem, elem, sizeof(query_elem)); + + /* Check DEL on source */ + query_elem.cmd_data.vlan_mac.cmd = BNX2X_VLAN_MAC_DEL; + if (src_exeq->get(src_exeq, &query_elem)) { + BNX2X_ERR("There is a pending DEL command on the source queue already\n"); + return -EINVAL; + } + + /* Check MOVE on source */ + if (src_exeq->get(src_exeq, elem)) { + DP(BNX2X_MSG_SP, "There is a pending MOVE command already\n"); + return -EEXIST; + } + + /* Check ADD on destination */ + query_elem.cmd_data.vlan_mac.cmd = BNX2X_VLAN_MAC_ADD; + if (dest_exeq->get(dest_exeq, &query_elem)) { + BNX2X_ERR("There is a pending ADD command on the destination queue already\n"); + return -EINVAL; + } + + /* Consume the credit if not requested not to */ + if (!(test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, + &elem->cmd_data.vlan_mac.vlan_mac_flags) || + dest_o->get_credit(dest_o))) + return -EINVAL; + + if (!(test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &elem->cmd_data.vlan_mac.vlan_mac_flags) || + src_o->put_credit(src_o))) { + /* return the credit taken from dest... */ + dest_o->put_credit(dest_o); + return -EINVAL; + } + + return 0; +} + +static int bnx2x_validate_vlan_mac(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + switch (elem->cmd_data.vlan_mac.cmd) { + case BNX2X_VLAN_MAC_ADD: + return bnx2x_validate_vlan_mac_add(bp, qo, elem); + case BNX2X_VLAN_MAC_DEL: + return bnx2x_validate_vlan_mac_del(bp, qo, elem); + case BNX2X_VLAN_MAC_MOVE: + return bnx2x_validate_vlan_mac_move(bp, qo, elem); + default: + return -EINVAL; + } +} + +static int bnx2x_remove_vlan_mac(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + int rc = 0; + + /* If consumption wasn't required, nothing to do */ + if (test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &elem->cmd_data.vlan_mac.vlan_mac_flags)) + return 0; + + switch (elem->cmd_data.vlan_mac.cmd) { + case BNX2X_VLAN_MAC_ADD: + case BNX2X_VLAN_MAC_MOVE: + rc = qo->vlan_mac.put_credit(&qo->vlan_mac); + break; + case BNX2X_VLAN_MAC_DEL: + rc = qo->vlan_mac.get_credit(&qo->vlan_mac); + break; + default: + return -EINVAL; + } + + if (rc != true) + return -EINVAL; + + return 0; +} + +/** + * bnx2x_wait_vlan_mac - passively wait for 5 seconds until all work completes. + * + * @bp: device handle + * @o: bnx2x_vlan_mac_obj + * + */ +static int bnx2x_wait_vlan_mac(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o) +{ + int cnt = 5000, rc; + struct bnx2x_exe_queue_obj *exeq = &o->exe_queue; + struct bnx2x_raw_obj *raw = &o->raw; + + while (cnt--) { + /* Wait for the current command to complete */ + rc = raw->wait_comp(bp, raw); + if (rc) + return rc; + + /* Wait until there are no pending commands */ + if (!bnx2x_exe_queue_empty(exeq)) + usleep_range(1000, 2000); + else + return 0; + } + + return -EBUSY; +} + +static int __bnx2x_vlan_mac_execute_step(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + unsigned long *ramrod_flags) +{ + int rc = 0; + + spin_lock_bh(&o->exe_queue.lock); + + DP(BNX2X_MSG_SP, "vlan_mac_execute_step - trying to take writer lock\n"); + rc = __bnx2x_vlan_mac_h_write_trylock(bp, o); + + if (rc != 0) { + __bnx2x_vlan_mac_h_pend(bp, o, *ramrod_flags); + + /* Calling function should not differentiate between this case + * and the case in which there is already a pending ramrod + */ + rc = 1; + } else { + rc = bnx2x_exe_queue_step(bp, &o->exe_queue, ramrod_flags); + } + spin_unlock_bh(&o->exe_queue.lock); + + return rc; +} + +/** + * bnx2x_complete_vlan_mac - complete one VLAN-MAC ramrod + * + * @bp: device handle + * @o: bnx2x_vlan_mac_obj + * @cqe: + * @cont: if true schedule next execution chunk + * + */ +static int bnx2x_complete_vlan_mac(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union event_ring_elem *cqe, + unsigned long *ramrod_flags) +{ + struct bnx2x_raw_obj *r = &o->raw; + int rc; + + /* Clearing the pending list & raw state should be made + * atomically (as execution flow assumes they represent the same). + */ + spin_lock_bh(&o->exe_queue.lock); + + /* Reset pending list */ + __bnx2x_exe_queue_reset_pending(bp, &o->exe_queue); + + /* Clear pending */ + r->clear_pending(r); + + spin_unlock_bh(&o->exe_queue.lock); + + /* If ramrod failed this is most likely a SW bug */ + if (cqe->message.error) + return -EINVAL; + + /* Run the next bulk of pending commands if requested */ + if (test_bit(RAMROD_CONT, ramrod_flags)) { + rc = __bnx2x_vlan_mac_execute_step(bp, o, ramrod_flags); + + if (rc < 0) + return rc; + } + + /* If there is more work to do return PENDING */ + if (!bnx2x_exe_queue_empty(&o->exe_queue)) + return 1; + + return 0; +} + +/** + * bnx2x_optimize_vlan_mac - optimize ADD and DEL commands. + * + * @bp: device handle + * @o: bnx2x_qable_obj + * @elem: bnx2x_exeq_elem + */ +static int bnx2x_optimize_vlan_mac(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + struct bnx2x_exeq_elem query, *pos; + struct bnx2x_vlan_mac_obj *o = &qo->vlan_mac; + struct bnx2x_exe_queue_obj *exeq = &o->exe_queue; + + memcpy(&query, elem, sizeof(query)); + + switch (elem->cmd_data.vlan_mac.cmd) { + case BNX2X_VLAN_MAC_ADD: + query.cmd_data.vlan_mac.cmd = BNX2X_VLAN_MAC_DEL; + break; + case BNX2X_VLAN_MAC_DEL: + query.cmd_data.vlan_mac.cmd = BNX2X_VLAN_MAC_ADD; + break; + default: + /* Don't handle anything other than ADD or DEL */ + return 0; + } + + /* If we found the appropriate element - delete it */ + pos = exeq->get(exeq, &query); + if (pos) { + + /* Return the credit of the optimized command */ + if (!test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &pos->cmd_data.vlan_mac.vlan_mac_flags)) { + if ((query.cmd_data.vlan_mac.cmd == + BNX2X_VLAN_MAC_ADD) && !o->put_credit(o)) { + BNX2X_ERR("Failed to return the credit for the optimized ADD command\n"); + return -EINVAL; + } else if (!o->get_credit(o)) { /* VLAN_MAC_DEL */ + BNX2X_ERR("Failed to recover the credit from the optimized DEL command\n"); + return -EINVAL; + } + } + + DP(BNX2X_MSG_SP, "Optimizing %s command\n", + (elem->cmd_data.vlan_mac.cmd == BNX2X_VLAN_MAC_ADD) ? + "ADD" : "DEL"); + + list_del(&pos->link); + bnx2x_exe_queue_free_elem(bp, pos); + return 1; + } + + return 0; +} + +/** + * bnx2x_vlan_mac_get_registry_elem - prepare a registry element + * + * @bp: device handle + * @o: + * @elem: + * @restore: + * @re: + * + * prepare a registry element according to the current command request. + */ +static inline int bnx2x_vlan_mac_get_registry_elem( + struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, + bool restore, + struct bnx2x_vlan_mac_registry_elem **re) +{ + enum bnx2x_vlan_mac_cmd cmd = elem->cmd_data.vlan_mac.cmd; + struct bnx2x_vlan_mac_registry_elem *reg_elem; + + /* Allocate a new registry element if needed. */ + if (!restore && + ((cmd == BNX2X_VLAN_MAC_ADD) || (cmd == BNX2X_VLAN_MAC_MOVE))) { + reg_elem = kzalloc(sizeof(*reg_elem), GFP_ATOMIC); + if (!reg_elem) + return -ENOMEM; + + /* Get a new CAM offset */ + if (!o->get_cam_offset(o, ®_elem->cam_offset)) { + /* This shall never happen, because we have checked the + * CAM availability in the 'validate'. + */ + WARN_ON(1); + kfree(reg_elem); + return -EINVAL; + } + + DP(BNX2X_MSG_SP, "Got cam offset %d\n", reg_elem->cam_offset); + + /* Set a VLAN-MAC data */ + memcpy(®_elem->u, &elem->cmd_data.vlan_mac.u, + sizeof(reg_elem->u)); + + /* Copy the flags (needed for DEL and RESTORE flows) */ + reg_elem->vlan_mac_flags = + elem->cmd_data.vlan_mac.vlan_mac_flags; + } else /* DEL, RESTORE */ + reg_elem = o->check_del(bp, o, &elem->cmd_data.vlan_mac.u); + + *re = reg_elem; + return 0; +} + +/** + * bnx2x_execute_vlan_mac - execute vlan mac command + * + * @bp: device handle + * @qo: + * @exe_chunk: + * @ramrod_flags: + * + * go and send a ramrod! + */ +static int bnx2x_execute_vlan_mac(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct list_head *exe_chunk, + unsigned long *ramrod_flags) +{ + struct bnx2x_exeq_elem *elem; + struct bnx2x_vlan_mac_obj *o = &qo->vlan_mac, *cam_obj; + struct bnx2x_raw_obj *r = &o->raw; + int rc, idx = 0; + bool restore = test_bit(RAMROD_RESTORE, ramrod_flags); + bool drv_only = test_bit(RAMROD_DRV_CLR_ONLY, ramrod_flags); + struct bnx2x_vlan_mac_registry_elem *reg_elem; + enum bnx2x_vlan_mac_cmd cmd; + + /* If DRIVER_ONLY execution is requested, cleanup a registry + * and exit. Otherwise send a ramrod to FW. + */ + if (!drv_only) { + WARN_ON(r->check_pending(r)); + + /* Set pending */ + r->set_pending(r); + + /* Fill the ramrod data */ + list_for_each_entry(elem, exe_chunk, link) { + cmd = elem->cmd_data.vlan_mac.cmd; + /* We will add to the target object in MOVE command, so + * change the object for a CAM search. + */ + if (cmd == BNX2X_VLAN_MAC_MOVE) + cam_obj = elem->cmd_data.vlan_mac.target_obj; + else + cam_obj = o; + + rc = bnx2x_vlan_mac_get_registry_elem(bp, cam_obj, + elem, restore, + ®_elem); + if (rc) + goto error_exit; + + WARN_ON(!reg_elem); + + /* Push a new entry into the registry */ + if (!restore && + ((cmd == BNX2X_VLAN_MAC_ADD) || + (cmd == BNX2X_VLAN_MAC_MOVE))) + list_add(®_elem->link, &cam_obj->head); + + /* Configure a single command in a ramrod data buffer */ + o->set_one_rule(bp, o, elem, idx, + reg_elem->cam_offset); + + /* MOVE command consumes 2 entries in the ramrod data */ + if (cmd == BNX2X_VLAN_MAC_MOVE) + idx += 2; + else + idx++; + } + + /* No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ + + rc = bnx2x_sp_post(bp, o->ramrod_cmd, r->cid, + U64_HI(r->rdata_mapping), + U64_LO(r->rdata_mapping), + ETH_CONNECTION_TYPE); + if (rc) + goto error_exit; + } + + /* Now, when we are done with the ramrod - clean up the registry */ + list_for_each_entry(elem, exe_chunk, link) { + cmd = elem->cmd_data.vlan_mac.cmd; + if ((cmd == BNX2X_VLAN_MAC_DEL) || + (cmd == BNX2X_VLAN_MAC_MOVE)) { + reg_elem = o->check_del(bp, o, + &elem->cmd_data.vlan_mac.u); + + WARN_ON(!reg_elem); + + o->put_cam_offset(o, reg_elem->cam_offset); + list_del(®_elem->link); + kfree(reg_elem); + } + } + + if (!drv_only) + return 1; + else + return 0; + +error_exit: + r->clear_pending(r); + + /* Cleanup a registry in case of a failure */ + list_for_each_entry(elem, exe_chunk, link) { + cmd = elem->cmd_data.vlan_mac.cmd; + + if (cmd == BNX2X_VLAN_MAC_MOVE) + cam_obj = elem->cmd_data.vlan_mac.target_obj; + else + cam_obj = o; + + /* Delete all newly added above entries */ + if (!restore && + ((cmd == BNX2X_VLAN_MAC_ADD) || + (cmd == BNX2X_VLAN_MAC_MOVE))) { + reg_elem = o->check_del(bp, cam_obj, + &elem->cmd_data.vlan_mac.u); + if (reg_elem) { + list_del(®_elem->link); + kfree(reg_elem); + } + } + } + + return rc; +} + +static inline int bnx2x_vlan_mac_push_new_cmd( + struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p) +{ + struct bnx2x_exeq_elem *elem; + struct bnx2x_vlan_mac_obj *o = p->vlan_mac_obj; + bool restore = test_bit(RAMROD_RESTORE, &p->ramrod_flags); + + /* Allocate the execution queue element */ + elem = bnx2x_exe_queue_alloc_elem(bp); + if (!elem) + return -ENOMEM; + + /* Set the command 'length' */ + switch (p->user_req.cmd) { + case BNX2X_VLAN_MAC_MOVE: + elem->cmd_len = 2; + break; + default: + elem->cmd_len = 1; + } + + /* Fill the object specific info */ + memcpy(&elem->cmd_data.vlan_mac, &p->user_req, sizeof(p->user_req)); + + /* Try to add a new command to the pending list */ + return bnx2x_exe_queue_add(bp, &o->exe_queue, elem, restore); +} + +/** + * bnx2x_config_vlan_mac - configure VLAN/MAC/VLAN_MAC filtering rules. + * + * @bp: device handle + * @p: + * + */ +int bnx2x_config_vlan_mac(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p) +{ + int rc = 0; + struct bnx2x_vlan_mac_obj *o = p->vlan_mac_obj; + unsigned long *ramrod_flags = &p->ramrod_flags; + bool cont = test_bit(RAMROD_CONT, ramrod_flags); + struct bnx2x_raw_obj *raw = &o->raw; + + /* + * Add new elements to the execution list for commands that require it. + */ + if (!cont) { + rc = bnx2x_vlan_mac_push_new_cmd(bp, p); + if (rc) + return rc; + } + + /* If nothing will be executed further in this iteration we want to + * return PENDING if there are pending commands + */ + if (!bnx2x_exe_queue_empty(&o->exe_queue)) + rc = 1; + + if (test_bit(RAMROD_DRV_CLR_ONLY, ramrod_flags)) { + DP(BNX2X_MSG_SP, "RAMROD_DRV_CLR_ONLY requested: clearing a pending bit.\n"); + raw->clear_pending(raw); + } + + /* Execute commands if required */ + if (cont || test_bit(RAMROD_EXEC, ramrod_flags) || + test_bit(RAMROD_COMP_WAIT, ramrod_flags)) { + rc = __bnx2x_vlan_mac_execute_step(bp, p->vlan_mac_obj, + &p->ramrod_flags); + if (rc < 0) + return rc; + } + + /* RAMROD_COMP_WAIT is a superset of RAMROD_EXEC. If it was set + * then user want to wait until the last command is done. + */ + if (test_bit(RAMROD_COMP_WAIT, &p->ramrod_flags)) { + /* Wait maximum for the current exe_queue length iterations plus + * one (for the current pending command). + */ + int max_iterations = bnx2x_exe_queue_length(&o->exe_queue) + 1; + + while (!bnx2x_exe_queue_empty(&o->exe_queue) && + max_iterations--) { + + /* Wait for the current command to complete */ + rc = raw->wait_comp(bp, raw); + if (rc) + return rc; + + /* Make a next step */ + rc = __bnx2x_vlan_mac_execute_step(bp, + p->vlan_mac_obj, + &p->ramrod_flags); + if (rc < 0) + return rc; + } + + return 0; + } + + return rc; +} + +/** + * bnx2x_vlan_mac_del_all - delete elements with given vlan_mac_flags spec + * + * @bp: device handle + * @o: + * @vlan_mac_flags: + * @ramrod_flags: execution flags to be used for this deletion + * + * if the last operation has completed successfully and there are no + * more elements left, positive value if the last operation has completed + * successfully and there are more previously configured elements, negative + * value is current operation has failed. + */ +static int bnx2x_vlan_mac_del_all(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + unsigned long *vlan_mac_flags, + unsigned long *ramrod_flags) +{ + struct bnx2x_vlan_mac_registry_elem *pos = NULL; + struct bnx2x_vlan_mac_ramrod_params p; + struct bnx2x_exe_queue_obj *exeq = &o->exe_queue; + struct bnx2x_exeq_elem *exeq_pos, *exeq_pos_n; + unsigned long flags; + int read_lock; + int rc = 0; + + /* Clear pending commands first */ + + spin_lock_bh(&exeq->lock); + + list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) { + flags = exeq_pos->cmd_data.vlan_mac.vlan_mac_flags; + if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) == + BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) { + rc = exeq->remove(bp, exeq->owner, exeq_pos); + if (rc) { + BNX2X_ERR("Failed to remove command\n"); + spin_unlock_bh(&exeq->lock); + return rc; + } + list_del(&exeq_pos->link); + bnx2x_exe_queue_free_elem(bp, exeq_pos); + } + } + + spin_unlock_bh(&exeq->lock); + + /* Prepare a command request */ + memset(&p, 0, sizeof(p)); + p.vlan_mac_obj = o; + p.ramrod_flags = *ramrod_flags; + p.user_req.cmd = BNX2X_VLAN_MAC_DEL; + + /* Add all but the last VLAN-MAC to the execution queue without actually + * execution anything. + */ + __clear_bit(RAMROD_COMP_WAIT, &p.ramrod_flags); + __clear_bit(RAMROD_EXEC, &p.ramrod_flags); + __clear_bit(RAMROD_CONT, &p.ramrod_flags); + + DP(BNX2X_MSG_SP, "vlan_mac_del_all -- taking vlan_mac_lock (reader)\n"); + read_lock = bnx2x_vlan_mac_h_read_lock(bp, o); + if (read_lock != 0) + return read_lock; + + list_for_each_entry(pos, &o->head, link) { + flags = pos->vlan_mac_flags; + if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) == + BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) { + p.user_req.vlan_mac_flags = pos->vlan_mac_flags; + memcpy(&p.user_req.u, &pos->u, sizeof(pos->u)); + rc = bnx2x_config_vlan_mac(bp, &p); + if (rc < 0) { + BNX2X_ERR("Failed to add a new DEL command\n"); + bnx2x_vlan_mac_h_read_unlock(bp, o); + return rc; + } + } + } + + DP(BNX2X_MSG_SP, "vlan_mac_del_all -- releasing vlan_mac_lock (reader)\n"); + bnx2x_vlan_mac_h_read_unlock(bp, o); + + p.ramrod_flags = *ramrod_flags; + __set_bit(RAMROD_CONT, &p.ramrod_flags); + + return bnx2x_config_vlan_mac(bp, &p); +} + +static inline void bnx2x_init_raw_obj(struct bnx2x_raw_obj *raw, u8 cl_id, + u32 cid, u8 func_id, void *rdata, dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type) +{ + raw->func_id = func_id; + raw->cid = cid; + raw->cl_id = cl_id; + raw->rdata = rdata; + raw->rdata_mapping = rdata_mapping; + raw->state = state; + raw->pstate = pstate; + raw->obj_type = type; + raw->check_pending = bnx2x_raw_check_pending; + raw->clear_pending = bnx2x_raw_clear_pending; + raw->set_pending = bnx2x_raw_set_pending; + raw->wait_comp = bnx2x_raw_wait; +} + +static inline void bnx2x_init_vlan_mac_common(struct bnx2x_vlan_mac_obj *o, + u8 cl_id, u32 cid, u8 func_id, void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool, + struct bnx2x_credit_pool_obj *vlans_pool) +{ + INIT_LIST_HEAD(&o->head); + o->head_reader = 0; + o->head_exe_request = false; + o->saved_ramrod_flags = 0; + + o->macs_pool = macs_pool; + o->vlans_pool = vlans_pool; + + o->delete_all = bnx2x_vlan_mac_del_all; + o->restore = bnx2x_vlan_mac_restore; + o->complete = bnx2x_complete_vlan_mac; + o->wait = bnx2x_wait_vlan_mac; + + bnx2x_init_raw_obj(&o->raw, cl_id, cid, func_id, rdata, rdata_mapping, + state, pstate, type); +} + +void bnx2x_init_mac_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool) +{ + union bnx2x_qable_obj *qable_obj = (union bnx2x_qable_obj *)mac_obj; + + bnx2x_init_vlan_mac_common(mac_obj, cl_id, cid, func_id, rdata, + rdata_mapping, state, pstate, type, + macs_pool, NULL); + + /* CAM credit pool handling */ + mac_obj->get_credit = bnx2x_get_credit_mac; + mac_obj->put_credit = bnx2x_put_credit_mac; + mac_obj->get_cam_offset = bnx2x_get_cam_offset_mac; + mac_obj->put_cam_offset = bnx2x_put_cam_offset_mac; + + if (CHIP_IS_E1x(bp)) { + mac_obj->set_one_rule = bnx2x_set_one_mac_e1x; + mac_obj->check_del = bnx2x_check_mac_del; + mac_obj->check_add = bnx2x_check_mac_add; + mac_obj->check_move = bnx2x_check_move_always_err; + mac_obj->ramrod_cmd = RAMROD_CMD_ID_ETH_SET_MAC; + + /* Exe Queue */ + bnx2x_exe_queue_init(bp, + &mac_obj->exe_queue, 1, qable_obj, + bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, + bnx2x_optimize_vlan_mac, + bnx2x_execute_vlan_mac, + bnx2x_exeq_get_mac); + } else { + mac_obj->set_one_rule = bnx2x_set_one_mac_e2; + mac_obj->check_del = bnx2x_check_mac_del; + mac_obj->check_add = bnx2x_check_mac_add; + mac_obj->check_move = bnx2x_check_move; + mac_obj->ramrod_cmd = + RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES; + mac_obj->get_n_elements = bnx2x_get_n_elements; + + /* Exe Queue */ + bnx2x_exe_queue_init(bp, + &mac_obj->exe_queue, CLASSIFY_RULES_COUNT, + qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, + bnx2x_optimize_vlan_mac, + bnx2x_execute_vlan_mac, + bnx2x_exeq_get_mac); + } +} + +void bnx2x_init_vlan_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *vlan_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *vlans_pool) +{ + union bnx2x_qable_obj *qable_obj = (union bnx2x_qable_obj *)vlan_obj; + + bnx2x_init_vlan_mac_common(vlan_obj, cl_id, cid, func_id, rdata, + rdata_mapping, state, pstate, type, NULL, + vlans_pool); + + vlan_obj->get_credit = bnx2x_get_credit_vlan; + vlan_obj->put_credit = bnx2x_put_credit_vlan; + vlan_obj->get_cam_offset = bnx2x_get_cam_offset_vlan; + vlan_obj->put_cam_offset = bnx2x_put_cam_offset_vlan; + + if (CHIP_IS_E1x(bp)) { + BNX2X_ERR("Do not support chips others than E2 and newer\n"); + BUG(); + } else { + vlan_obj->set_one_rule = bnx2x_set_one_vlan_e2; + vlan_obj->check_del = bnx2x_check_vlan_del; + vlan_obj->check_add = bnx2x_check_vlan_add; + vlan_obj->check_move = bnx2x_check_move; + vlan_obj->ramrod_cmd = + RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES; + vlan_obj->get_n_elements = bnx2x_get_n_elements; + + /* Exe Queue */ + bnx2x_exe_queue_init(bp, + &vlan_obj->exe_queue, CLASSIFY_RULES_COUNT, + qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, + bnx2x_optimize_vlan_mac, + bnx2x_execute_vlan_mac, + bnx2x_exeq_get_vlan); + } +} + +void bnx2x_init_vlan_mac_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *vlan_mac_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool, + struct bnx2x_credit_pool_obj *vlans_pool) +{ + union bnx2x_qable_obj *qable_obj = + (union bnx2x_qable_obj *)vlan_mac_obj; + + bnx2x_init_vlan_mac_common(vlan_mac_obj, cl_id, cid, func_id, rdata, + rdata_mapping, state, pstate, type, + macs_pool, vlans_pool); + + /* CAM pool handling */ + vlan_mac_obj->get_credit = bnx2x_get_credit_vlan_mac; + vlan_mac_obj->put_credit = bnx2x_put_credit_vlan_mac; + /* CAM offset is relevant for 57710 and 57711 chips only which have a + * single CAM for both MACs and VLAN-MAC pairs. So the offset + * will be taken from MACs' pool object only. + */ + vlan_mac_obj->get_cam_offset = bnx2x_get_cam_offset_mac; + vlan_mac_obj->put_cam_offset = bnx2x_put_cam_offset_mac; + + if (CHIP_IS_E1(bp)) { + BNX2X_ERR("Do not support chips others than E2\n"); + BUG(); + } else if (CHIP_IS_E1H(bp)) { + vlan_mac_obj->set_one_rule = bnx2x_set_one_vlan_mac_e1h; + vlan_mac_obj->check_del = bnx2x_check_vlan_mac_del; + vlan_mac_obj->check_add = bnx2x_check_vlan_mac_add; + vlan_mac_obj->check_move = bnx2x_check_move_always_err; + vlan_mac_obj->ramrod_cmd = RAMROD_CMD_ID_ETH_SET_MAC; + + /* Exe Queue */ + bnx2x_exe_queue_init(bp, + &vlan_mac_obj->exe_queue, 1, qable_obj, + bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, + bnx2x_optimize_vlan_mac, + bnx2x_execute_vlan_mac, + bnx2x_exeq_get_vlan_mac); + } else { + vlan_mac_obj->set_one_rule = bnx2x_set_one_vlan_mac_e2; + vlan_mac_obj->check_del = bnx2x_check_vlan_mac_del; + vlan_mac_obj->check_add = bnx2x_check_vlan_mac_add; + vlan_mac_obj->check_move = bnx2x_check_move; + vlan_mac_obj->ramrod_cmd = + RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES; + + /* Exe Queue */ + bnx2x_exe_queue_init(bp, + &vlan_mac_obj->exe_queue, + CLASSIFY_RULES_COUNT, + qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, + bnx2x_optimize_vlan_mac, + bnx2x_execute_vlan_mac, + bnx2x_exeq_get_vlan_mac); + } +} +/* RX_MODE verbs: DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */ +static inline void __storm_memset_mac_filters(struct bnx2x *bp, + struct tstorm_eth_mac_filter_config *mac_filters, + u16 pf_id) +{ + size_t size = sizeof(struct tstorm_eth_mac_filter_config); + + u32 addr = BAR_TSTRORM_INTMEM + + TSTORM_MAC_FILTER_CONFIG_OFFSET(pf_id); + + __storm_memset_struct(bp, addr, size, (u32 *)mac_filters); +} + +static int bnx2x_set_rx_mode_e1x(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p) +{ + /* update the bp MAC filter structure */ + u32 mask = (1 << p->cl_id); + + struct tstorm_eth_mac_filter_config *mac_filters = + (struct tstorm_eth_mac_filter_config *)p->rdata; + + /* initial setting is drop-all */ + u8 drop_all_ucast = 1, drop_all_mcast = 1; + u8 accp_all_ucast = 0, accp_all_bcast = 0, accp_all_mcast = 0; + u8 unmatched_unicast = 0; + + /* In e1x there we only take into account rx accept flag since tx switching + * isn't enabled. */ + if (test_bit(BNX2X_ACCEPT_UNICAST, &p->rx_accept_flags)) + /* accept matched ucast */ + drop_all_ucast = 0; + + if (test_bit(BNX2X_ACCEPT_MULTICAST, &p->rx_accept_flags)) + /* accept matched mcast */ + drop_all_mcast = 0; + + if (test_bit(BNX2X_ACCEPT_ALL_UNICAST, &p->rx_accept_flags)) { + /* accept all mcast */ + drop_all_ucast = 0; + accp_all_ucast = 1; + } + if (test_bit(BNX2X_ACCEPT_ALL_MULTICAST, &p->rx_accept_flags)) { + /* accept all mcast */ + drop_all_mcast = 0; + accp_all_mcast = 1; + } + if (test_bit(BNX2X_ACCEPT_BROADCAST, &p->rx_accept_flags)) + /* accept (all) bcast */ + accp_all_bcast = 1; + if (test_bit(BNX2X_ACCEPT_UNMATCHED, &p->rx_accept_flags)) + /* accept unmatched unicasts */ + unmatched_unicast = 1; + + mac_filters->ucast_drop_all = drop_all_ucast ? + mac_filters->ucast_drop_all | mask : + mac_filters->ucast_drop_all & ~mask; + + mac_filters->mcast_drop_all = drop_all_mcast ? + mac_filters->mcast_drop_all | mask : + mac_filters->mcast_drop_all & ~mask; + + mac_filters->ucast_accept_all = accp_all_ucast ? + mac_filters->ucast_accept_all | mask : + mac_filters->ucast_accept_all & ~mask; + + mac_filters->mcast_accept_all = accp_all_mcast ? + mac_filters->mcast_accept_all | mask : + mac_filters->mcast_accept_all & ~mask; + + mac_filters->bcast_accept_all = accp_all_bcast ? + mac_filters->bcast_accept_all | mask : + mac_filters->bcast_accept_all & ~mask; + + mac_filters->unmatched_unicast = unmatched_unicast ? + mac_filters->unmatched_unicast | mask : + mac_filters->unmatched_unicast & ~mask; + + DP(BNX2X_MSG_SP, "drop_ucast 0x%x\ndrop_mcast 0x%x\n accp_ucast 0x%x\n" + "accp_mcast 0x%x\naccp_bcast 0x%x\n", + mac_filters->ucast_drop_all, mac_filters->mcast_drop_all, + mac_filters->ucast_accept_all, mac_filters->mcast_accept_all, + mac_filters->bcast_accept_all); + + /* write the MAC filter structure*/ + __storm_memset_mac_filters(bp, mac_filters, p->func_id); + + /* The operation is completed */ + clear_bit(p->state, p->pstate); + smp_mb__after_atomic(); + + return 0; +} + +/* Setup ramrod data */ +static inline void bnx2x_rx_mode_set_rdata_hdr_e2(u32 cid, + struct eth_classify_header *hdr, + u8 rule_cnt) +{ + hdr->echo = cpu_to_le32(cid); + hdr->rule_cnt = rule_cnt; +} + +static inline void bnx2x_rx_mode_set_cmd_state_e2(struct bnx2x *bp, + unsigned long *accept_flags, + struct eth_filter_rules_cmd *cmd, + bool clear_accept_all) +{ + u16 state; + + /* start with 'drop-all' */ + state = ETH_FILTER_RULES_CMD_UCAST_DROP_ALL | + ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; + + if (test_bit(BNX2X_ACCEPT_UNICAST, accept_flags)) + state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; + + if (test_bit(BNX2X_ACCEPT_MULTICAST, accept_flags)) + state &= ~ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; + + if (test_bit(BNX2X_ACCEPT_ALL_UNICAST, accept_flags)) { + state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; + state |= ETH_FILTER_RULES_CMD_UCAST_ACCEPT_ALL; + } + + if (test_bit(BNX2X_ACCEPT_ALL_MULTICAST, accept_flags)) { + state |= ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL; + state &= ~ETH_FILTER_RULES_CMD_MCAST_DROP_ALL; + } + + if (test_bit(BNX2X_ACCEPT_BROADCAST, accept_flags)) + state |= ETH_FILTER_RULES_CMD_BCAST_ACCEPT_ALL; + + if (test_bit(BNX2X_ACCEPT_UNMATCHED, accept_flags)) { + state &= ~ETH_FILTER_RULES_CMD_UCAST_DROP_ALL; + state |= ETH_FILTER_RULES_CMD_UCAST_ACCEPT_UNMATCHED; + } + + if (test_bit(BNX2X_ACCEPT_ANY_VLAN, accept_flags)) + state |= ETH_FILTER_RULES_CMD_ACCEPT_ANY_VLAN; + + /* Clear ACCEPT_ALL_XXX flags for FCoE L2 Queue */ + if (clear_accept_all) { + state &= ~ETH_FILTER_RULES_CMD_MCAST_ACCEPT_ALL; + state &= ~ETH_FILTER_RULES_CMD_BCAST_ACCEPT_ALL; + state &= ~ETH_FILTER_RULES_CMD_UCAST_ACCEPT_ALL; + state &= ~ETH_FILTER_RULES_CMD_UCAST_ACCEPT_UNMATCHED; + } + + cmd->state = cpu_to_le16(state); +} + +static int bnx2x_set_rx_mode_e2(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p) +{ + struct eth_filter_rules_ramrod_data *data = p->rdata; + int rc; + u8 rule_idx = 0; + + /* Reset the ramrod data buffer */ + memset(data, 0, sizeof(*data)); + + /* Setup ramrod data */ + + /* Tx (internal switching) */ + if (test_bit(RAMROD_TX, &p->ramrod_flags)) { + data->rules[rule_idx].client_id = p->cl_id; + data->rules[rule_idx].func_id = p->func_id; + + data->rules[rule_idx].cmd_general_data = + ETH_FILTER_RULES_CMD_TX_CMD; + + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->tx_accept_flags, + &(data->rules[rule_idx++]), + false); + } + + /* Rx */ + if (test_bit(RAMROD_RX, &p->ramrod_flags)) { + data->rules[rule_idx].client_id = p->cl_id; + data->rules[rule_idx].func_id = p->func_id; + + data->rules[rule_idx].cmd_general_data = + ETH_FILTER_RULES_CMD_RX_CMD; + + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->rx_accept_flags, + &(data->rules[rule_idx++]), + false); + } + + /* If FCoE Queue configuration has been requested configure the Rx and + * internal switching modes for this queue in separate rules. + * + * FCoE queue shell never be set to ACCEPT_ALL packets of any sort: + * MCAST_ALL, UCAST_ALL, BCAST_ALL and UNMATCHED. + */ + if (test_bit(BNX2X_RX_MODE_FCOE_ETH, &p->rx_mode_flags)) { + /* Tx (internal switching) */ + if (test_bit(RAMROD_TX, &p->ramrod_flags)) { + data->rules[rule_idx].client_id = bnx2x_fcoe(bp, cl_id); + data->rules[rule_idx].func_id = p->func_id; + + data->rules[rule_idx].cmd_general_data = + ETH_FILTER_RULES_CMD_TX_CMD; + + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->tx_accept_flags, + &(data->rules[rule_idx]), + true); + rule_idx++; + } + + /* Rx */ + if (test_bit(RAMROD_RX, &p->ramrod_flags)) { + data->rules[rule_idx].client_id = bnx2x_fcoe(bp, cl_id); + data->rules[rule_idx].func_id = p->func_id; + + data->rules[rule_idx].cmd_general_data = + ETH_FILTER_RULES_CMD_RX_CMD; + + bnx2x_rx_mode_set_cmd_state_e2(bp, &p->rx_accept_flags, + &(data->rules[rule_idx]), + true); + rule_idx++; + } + } + + /* Set the ramrod header (most importantly - number of rules to + * configure). + */ + bnx2x_rx_mode_set_rdata_hdr_e2(p->cid, &data->header, rule_idx); + + DP(BNX2X_MSG_SP, "About to configure %d rules, rx_accept_flags 0x%lx, tx_accept_flags 0x%lx\n", + data->header.rule_cnt, p->rx_accept_flags, + p->tx_accept_flags); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + + /* Send a ramrod */ + rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_FILTER_RULES, p->cid, + U64_HI(p->rdata_mapping), + U64_LO(p->rdata_mapping), + ETH_CONNECTION_TYPE); + if (rc) + return rc; + + /* Ramrod completion is pending */ + return 1; +} + +static int bnx2x_wait_rx_mode_comp_e2(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p) +{ + return bnx2x_state_wait(bp, p->state, p->pstate); +} + +static int bnx2x_empty_rx_mode_wait(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p) +{ + /* Do nothing */ + return 0; +} + +int bnx2x_config_rx_mode(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p) +{ + int rc; + + /* Configure the new classification in the chip */ + rc = p->rx_mode_obj->config_rx_mode(bp, p); + if (rc < 0) + return rc; + + /* Wait for a ramrod completion if was requested */ + if (test_bit(RAMROD_COMP_WAIT, &p->ramrod_flags)) { + rc = p->rx_mode_obj->wait_comp(bp, p); + if (rc) + return rc; + } + + return rc; +} + +void bnx2x_init_rx_mode_obj(struct bnx2x *bp, + struct bnx2x_rx_mode_obj *o) +{ + if (CHIP_IS_E1x(bp)) { + o->wait_comp = bnx2x_empty_rx_mode_wait; + o->config_rx_mode = bnx2x_set_rx_mode_e1x; + } else { + o->wait_comp = bnx2x_wait_rx_mode_comp_e2; + o->config_rx_mode = bnx2x_set_rx_mode_e2; + } +} + +/********************* Multicast verbs: SET, CLEAR ****************************/ +static inline u8 bnx2x_mcast_bin_from_mac(u8 *mac) +{ + return (crc32c_le(0, mac, ETH_ALEN) >> 24) & 0xff; +} + +struct bnx2x_mcast_mac_elem { + struct list_head link; + u8 mac[ETH_ALEN]; + u8 pad[2]; /* For a natural alignment of the following buffer */ +}; + +struct bnx2x_mcast_bin_elem { + struct list_head link; + int bin; + int type; /* BNX2X_MCAST_CMD_SET_{ADD, DEL} */ +}; + +union bnx2x_mcast_elem { + struct bnx2x_mcast_bin_elem bin_elem; + struct bnx2x_mcast_mac_elem mac_elem; +}; + +struct bnx2x_mcast_elem_group { + struct list_head mcast_group_link; + union bnx2x_mcast_elem mcast_elems[]; +}; + +#define MCAST_MAC_ELEMS_PER_PG \ + ((PAGE_SIZE - sizeof(struct bnx2x_mcast_elem_group)) / \ + sizeof(union bnx2x_mcast_elem)) + +struct bnx2x_pending_mcast_cmd { + struct list_head link; + struct list_head group_head; + int type; /* BNX2X_MCAST_CMD_X */ + union { + struct list_head macs_head; + u32 macs_num; /* Needed for DEL command */ + int next_bin; /* Needed for RESTORE flow with aprox match */ + } data; + + bool set_convert; /* in case type == BNX2X_MCAST_CMD_SET, this is set + * when macs_head had been converted to a list of + * bnx2x_mcast_bin_elem. + */ + + bool done; /* set to true, when the command has been handled, + * practically used in 57712 handling only, where one pending + * command may be handled in a few operations. As long as for + * other chips every operation handling is completed in a + * single ramrod, there is no need to utilize this field. + */ +}; + +static int bnx2x_mcast_wait(struct bnx2x *bp, + struct bnx2x_mcast_obj *o) +{ + if (bnx2x_state_wait(bp, o->sched_state, o->raw.pstate) || + o->raw.wait_comp(bp, &o->raw)) + return -EBUSY; + + return 0; +} + +static void bnx2x_free_groups(struct list_head *mcast_group_list) +{ + struct bnx2x_mcast_elem_group *current_mcast_group; + + while (!list_empty(mcast_group_list)) { + current_mcast_group = list_first_entry(mcast_group_list, + struct bnx2x_mcast_elem_group, + mcast_group_link); + list_del(¤t_mcast_group->mcast_group_link); + free_page((unsigned long)current_mcast_group); + } +} + +static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_pending_mcast_cmd *new_cmd; + struct bnx2x_mcast_list_elem *pos; + struct bnx2x_mcast_elem_group *elem_group; + struct bnx2x_mcast_mac_elem *mac_elem; + int total_elems = 0, macs_list_len = 0, offset = 0; + + /* When adding MACs we'll need to store their values */ + if (cmd == BNX2X_MCAST_CMD_ADD || cmd == BNX2X_MCAST_CMD_SET) + macs_list_len = p->mcast_list_len; + + /* If the command is empty ("handle pending commands only"), break */ + if (!p->mcast_list_len) + return 0; + + /* Add mcast is called under spin_lock, thus calling with GFP_ATOMIC */ + new_cmd = kzalloc(sizeof(*new_cmd), GFP_ATOMIC); + if (!new_cmd) + return -ENOMEM; + + INIT_LIST_HEAD(&new_cmd->data.macs_head); + INIT_LIST_HEAD(&new_cmd->group_head); + new_cmd->type = cmd; + new_cmd->done = false; + + DP(BNX2X_MSG_SP, "About to enqueue a new %d command. macs_list_len=%d\n", + cmd, macs_list_len); + + switch (cmd) { + case BNX2X_MCAST_CMD_ADD: + case BNX2X_MCAST_CMD_SET: + /* For a set command, we need to allocate sufficient memory for + * all the bins, since we can't analyze at this point how much + * memory would be required. + */ + total_elems = macs_list_len; + if (cmd == BNX2X_MCAST_CMD_SET) { + if (total_elems < BNX2X_MCAST_BINS_NUM) + total_elems = BNX2X_MCAST_BINS_NUM; + } + while (total_elems > 0) { + elem_group = (struct bnx2x_mcast_elem_group *) + __get_free_page(GFP_ATOMIC | __GFP_ZERO); + if (!elem_group) { + bnx2x_free_groups(&new_cmd->group_head); + kfree(new_cmd); + return -ENOMEM; + } + total_elems -= MCAST_MAC_ELEMS_PER_PG; + list_add_tail(&elem_group->mcast_group_link, + &new_cmd->group_head); + } + elem_group = list_first_entry(&new_cmd->group_head, + struct bnx2x_mcast_elem_group, + mcast_group_link); + list_for_each_entry(pos, &p->mcast_list, link) { + mac_elem = &elem_group->mcast_elems[offset].mac_elem; + memcpy(mac_elem->mac, pos->mac, ETH_ALEN); + /* Push the MACs of the current command into the pending + * command MACs list: FIFO + */ + list_add_tail(&mac_elem->link, + &new_cmd->data.macs_head); + offset++; + if (offset == MCAST_MAC_ELEMS_PER_PG) { + offset = 0; + elem_group = list_next_entry(elem_group, + mcast_group_link); + } + } + break; + + case BNX2X_MCAST_CMD_DEL: + new_cmd->data.macs_num = p->mcast_list_len; + break; + + case BNX2X_MCAST_CMD_RESTORE: + new_cmd->data.next_bin = 0; + break; + + default: + kfree(new_cmd); + BNX2X_ERR("Unknown command: %d\n", cmd); + return -EINVAL; + } + + /* Push the new pending command to the tail of the pending list: FIFO */ + list_add_tail(&new_cmd->link, &o->pending_cmds_head); + + o->set_sched(o); + + return 1; +} + +/** + * bnx2x_mcast_get_next_bin - get the next set bin (index) + * + * @o: + * @last: index to start looking from (including) + * + * returns the next found (set) bin or a negative value if none is found. + */ +static inline int bnx2x_mcast_get_next_bin(struct bnx2x_mcast_obj *o, int last) +{ + int i, j, inner_start = last % BIT_VEC64_ELEM_SZ; + + for (i = last / BIT_VEC64_ELEM_SZ; i < BNX2X_MCAST_VEC_SZ; i++) { + if (o->registry.aprox_match.vec[i]) + for (j = inner_start; j < BIT_VEC64_ELEM_SZ; j++) { + int cur_bit = j + BIT_VEC64_ELEM_SZ * i; + if (BIT_VEC64_TEST_BIT(o->registry.aprox_match. + vec, cur_bit)) { + return cur_bit; + } + } + inner_start = 0; + } + + /* None found */ + return -1; +} + +/** + * bnx2x_mcast_clear_first_bin - find the first set bin and clear it + * + * @o: + * + * returns the index of the found bin or -1 if none is found + */ +static inline int bnx2x_mcast_clear_first_bin(struct bnx2x_mcast_obj *o) +{ + int cur_bit = bnx2x_mcast_get_next_bin(o, 0); + + if (cur_bit >= 0) + BIT_VEC64_CLEAR_BIT(o->registry.aprox_match.vec, cur_bit); + + return cur_bit; +} + +static inline u8 bnx2x_mcast_get_rx_tx_flag(struct bnx2x_mcast_obj *o) +{ + struct bnx2x_raw_obj *raw = &o->raw; + u8 rx_tx_flag = 0; + + if ((raw->obj_type == BNX2X_OBJ_TYPE_TX) || + (raw->obj_type == BNX2X_OBJ_TYPE_RX_TX)) + rx_tx_flag |= ETH_MULTICAST_RULES_CMD_TX_CMD; + + if ((raw->obj_type == BNX2X_OBJ_TYPE_RX) || + (raw->obj_type == BNX2X_OBJ_TYPE_RX_TX)) + rx_tx_flag |= ETH_MULTICAST_RULES_CMD_RX_CMD; + + return rx_tx_flag; +} + +static void bnx2x_mcast_set_one_rule_e2(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, int idx, + union bnx2x_mcast_config_data *cfg_data, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_raw_obj *r = &o->raw; + struct eth_multicast_rules_ramrod_data *data = + (struct eth_multicast_rules_ramrod_data *)(r->rdata); + u8 func_id = r->func_id; + u8 rx_tx_add_flag = bnx2x_mcast_get_rx_tx_flag(o); + int bin; + + if ((cmd == BNX2X_MCAST_CMD_ADD) || (cmd == BNX2X_MCAST_CMD_RESTORE) || + (cmd == BNX2X_MCAST_CMD_SET_ADD)) + rx_tx_add_flag |= ETH_MULTICAST_RULES_CMD_IS_ADD; + + data->rules[idx].cmd_general_data |= rx_tx_add_flag; + + /* Get a bin and update a bins' vector */ + switch (cmd) { + case BNX2X_MCAST_CMD_ADD: + bin = bnx2x_mcast_bin_from_mac(cfg_data->mac); + BIT_VEC64_SET_BIT(o->registry.aprox_match.vec, bin); + break; + + case BNX2X_MCAST_CMD_DEL: + /* If there were no more bins to clear + * (bnx2x_mcast_clear_first_bin() returns -1) then we would + * clear any (0xff) bin. + * See bnx2x_mcast_validate_e2() for explanation when it may + * happen. + */ + bin = bnx2x_mcast_clear_first_bin(o); + break; + + case BNX2X_MCAST_CMD_RESTORE: + bin = cfg_data->bin; + break; + + case BNX2X_MCAST_CMD_SET_ADD: + bin = cfg_data->bin; + BIT_VEC64_SET_BIT(o->registry.aprox_match.vec, bin); + break; + + case BNX2X_MCAST_CMD_SET_DEL: + bin = cfg_data->bin; + BIT_VEC64_CLEAR_BIT(o->registry.aprox_match.vec, bin); + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd); + return; + } + + DP(BNX2X_MSG_SP, "%s bin %d\n", + ((rx_tx_add_flag & ETH_MULTICAST_RULES_CMD_IS_ADD) ? + "Setting" : "Clearing"), bin); + + data->rules[idx].bin_id = (u8)bin; + data->rules[idx].func_id = func_id; + data->rules[idx].engine_id = o->engine_id; +} + +/** + * bnx2x_mcast_handle_restore_cmd_e2 - restore configuration from the registry + * + * @bp: device handle + * @o: + * @start_bin: index in the registry to start from (including) + * @rdata_idx: index in the ramrod data to start from + * + * returns last handled bin index or -1 if all bins have been handled + */ +static inline int bnx2x_mcast_handle_restore_cmd_e2( + struct bnx2x *bp, struct bnx2x_mcast_obj *o , int start_bin, + int *rdata_idx) +{ + int cur_bin, cnt = *rdata_idx; + union bnx2x_mcast_config_data cfg_data = {NULL}; + + /* go through the registry and configure the bins from it */ + for (cur_bin = bnx2x_mcast_get_next_bin(o, start_bin); cur_bin >= 0; + cur_bin = bnx2x_mcast_get_next_bin(o, cur_bin + 1)) { + + cfg_data.bin = (u8)cur_bin; + o->set_one_rule(bp, o, cnt, &cfg_data, + BNX2X_MCAST_CMD_RESTORE); + + cnt++; + + DP(BNX2X_MSG_SP, "About to configure a bin %d\n", cur_bin); + + /* Break if we reached the maximum number + * of rules. + */ + if (cnt >= o->max_cmd_len) + break; + } + + *rdata_idx = cnt; + + return cur_bin; +} + +static inline void bnx2x_mcast_hdl_pending_add_e2(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, struct bnx2x_pending_mcast_cmd *cmd_pos, + int *line_idx) +{ + struct bnx2x_mcast_mac_elem *pmac_pos, *pmac_pos_n; + int cnt = *line_idx; + union bnx2x_mcast_config_data cfg_data = {NULL}; + + list_for_each_entry_safe(pmac_pos, pmac_pos_n, &cmd_pos->data.macs_head, + link) { + + cfg_data.mac = &pmac_pos->mac[0]; + o->set_one_rule(bp, o, cnt, &cfg_data, cmd_pos->type); + + cnt++; + + DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", + pmac_pos->mac); + + list_del(&pmac_pos->link); + + /* Break if we reached the maximum number + * of rules. + */ + if (cnt >= o->max_cmd_len) + break; + } + + *line_idx = cnt; + + /* if no more MACs to configure - we are done */ + if (list_empty(&cmd_pos->data.macs_head)) + cmd_pos->done = true; +} + +static inline void bnx2x_mcast_hdl_pending_del_e2(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, struct bnx2x_pending_mcast_cmd *cmd_pos, + int *line_idx) +{ + int cnt = *line_idx; + + while (cmd_pos->data.macs_num) { + o->set_one_rule(bp, o, cnt, NULL, cmd_pos->type); + + cnt++; + + cmd_pos->data.macs_num--; + + DP(BNX2X_MSG_SP, "Deleting MAC. %d left,cnt is %d\n", + cmd_pos->data.macs_num, cnt); + + /* Break if we reached the maximum + * number of rules. + */ + if (cnt >= o->max_cmd_len) + break; + } + + *line_idx = cnt; + + /* If we cleared all bins - we are done */ + if (!cmd_pos->data.macs_num) + cmd_pos->done = true; +} + +static inline void bnx2x_mcast_hdl_pending_restore_e2(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, struct bnx2x_pending_mcast_cmd *cmd_pos, + int *line_idx) +{ + cmd_pos->data.next_bin = o->hdl_restore(bp, o, cmd_pos->data.next_bin, + line_idx); + + if (cmd_pos->data.next_bin < 0) + /* If o->set_restore returned -1 we are done */ + cmd_pos->done = true; + else + /* Start from the next bin next time */ + cmd_pos->data.next_bin++; +} + +static void +bnx2x_mcast_hdl_pending_set_e2_convert(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, + struct bnx2x_pending_mcast_cmd *cmd_pos) +{ + u64 cur[BNX2X_MCAST_VEC_SZ], req[BNX2X_MCAST_VEC_SZ]; + struct bnx2x_mcast_mac_elem *pmac_pos, *pmac_pos_n; + struct bnx2x_mcast_bin_elem *p_item; + struct bnx2x_mcast_elem_group *elem_group; + int cnt = 0, mac_cnt = 0, offset = 0, i; + + memset(req, 0, sizeof(u64) * BNX2X_MCAST_VEC_SZ); + memcpy(cur, o->registry.aprox_match.vec, + sizeof(u64) * BNX2X_MCAST_VEC_SZ); + + /* Fill `current' with the required set of bins to configure */ + list_for_each_entry_safe(pmac_pos, pmac_pos_n, &cmd_pos->data.macs_head, + link) { + int bin = bnx2x_mcast_bin_from_mac(pmac_pos->mac); + + DP(BNX2X_MSG_SP, "Set contains %pM mcast MAC\n", + pmac_pos->mac); + + BIT_VEC64_SET_BIT(req, bin); + list_del(&pmac_pos->link); + mac_cnt++; + } + + /* We no longer have use for the MACs; Need to re-use memory for + * a list that will be used to configure bins. + */ + cmd_pos->set_convert = true; + INIT_LIST_HEAD(&cmd_pos->data.macs_head); + elem_group = list_first_entry(&cmd_pos->group_head, + struct bnx2x_mcast_elem_group, + mcast_group_link); + for (i = 0; i < BNX2X_MCAST_BINS_NUM; i++) { + bool b_current = !!BIT_VEC64_TEST_BIT(cur, i); + bool b_required = !!BIT_VEC64_TEST_BIT(req, i); + + if (b_current == b_required) + continue; + + p_item = &elem_group->mcast_elems[offset].bin_elem; + p_item->bin = i; + p_item->type = b_required ? BNX2X_MCAST_CMD_SET_ADD + : BNX2X_MCAST_CMD_SET_DEL; + list_add_tail(&p_item->link , &cmd_pos->data.macs_head); + cnt++; + offset++; + if (offset == MCAST_MAC_ELEMS_PER_PG) { + offset = 0; + elem_group = list_next_entry(elem_group, + mcast_group_link); + } + } + + /* We now definitely know how many commands are hiding here. + * Also need to correct the disruption we've added to guarantee this + * would be enqueued. + */ + o->total_pending_num -= (o->max_cmd_len + mac_cnt); + o->total_pending_num += cnt; + + DP(BNX2X_MSG_SP, "o->total_pending_num=%d\n", o->total_pending_num); +} + +static void +bnx2x_mcast_hdl_pending_set_e2(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, + struct bnx2x_pending_mcast_cmd *cmd_pos, + int *cnt) +{ + union bnx2x_mcast_config_data cfg_data = {NULL}; + struct bnx2x_mcast_bin_elem *p_item, *p_item_n; + + /* This is actually a 2-part scheme - it starts by converting the MACs + * into a list of bins to be added/removed, and correcting the numbers + * on the object. this is now allowed, as we're now sure that all + * previous configured requests have already applied. + * The second part is actually adding rules for the newly introduced + * entries [like all the rest of the hdl_pending functions]. + */ + if (!cmd_pos->set_convert) + bnx2x_mcast_hdl_pending_set_e2_convert(bp, o, cmd_pos); + + list_for_each_entry_safe(p_item, p_item_n, &cmd_pos->data.macs_head, + link) { + cfg_data.bin = (u8)p_item->bin; + o->set_one_rule(bp, o, *cnt, &cfg_data, p_item->type); + (*cnt)++; + + list_del(&p_item->link); + + /* Break if we reached the maximum number of rules. */ + if (*cnt >= o->max_cmd_len) + break; + } + + /* if no more MACs to configure - we are done */ + if (list_empty(&cmd_pos->data.macs_head)) + cmd_pos->done = true; +} + +static inline int bnx2x_mcast_handle_pending_cmds_e2(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p) +{ + struct bnx2x_pending_mcast_cmd *cmd_pos, *cmd_pos_n; + int cnt = 0; + struct bnx2x_mcast_obj *o = p->mcast_obj; + + list_for_each_entry_safe(cmd_pos, cmd_pos_n, &o->pending_cmds_head, + link) { + switch (cmd_pos->type) { + case BNX2X_MCAST_CMD_ADD: + bnx2x_mcast_hdl_pending_add_e2(bp, o, cmd_pos, &cnt); + break; + + case BNX2X_MCAST_CMD_DEL: + bnx2x_mcast_hdl_pending_del_e2(bp, o, cmd_pos, &cnt); + break; + + case BNX2X_MCAST_CMD_RESTORE: + bnx2x_mcast_hdl_pending_restore_e2(bp, o, cmd_pos, + &cnt); + break; + + case BNX2X_MCAST_CMD_SET: + bnx2x_mcast_hdl_pending_set_e2(bp, o, cmd_pos, &cnt); + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd_pos->type); + return -EINVAL; + } + + /* If the command has been completed - remove it from the list + * and free the memory + */ + if (cmd_pos->done) { + list_del(&cmd_pos->link); + bnx2x_free_groups(&cmd_pos->group_head); + kfree(cmd_pos); + } + + /* Break if we reached the maximum number of rules */ + if (cnt >= o->max_cmd_len) + break; + } + + return cnt; +} + +static inline void bnx2x_mcast_hdl_add(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, struct bnx2x_mcast_ramrod_params *p, + int *line_idx) +{ + struct bnx2x_mcast_list_elem *mlist_pos; + union bnx2x_mcast_config_data cfg_data = {NULL}; + int cnt = *line_idx; + + list_for_each_entry(mlist_pos, &p->mcast_list, link) { + cfg_data.mac = mlist_pos->mac; + o->set_one_rule(bp, o, cnt, &cfg_data, BNX2X_MCAST_CMD_ADD); + + cnt++; + + DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", + mlist_pos->mac); + } + + *line_idx = cnt; +} + +static inline void bnx2x_mcast_hdl_del(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, struct bnx2x_mcast_ramrod_params *p, + int *line_idx) +{ + int cnt = *line_idx, i; + + for (i = 0; i < p->mcast_list_len; i++) { + o->set_one_rule(bp, o, cnt, NULL, BNX2X_MCAST_CMD_DEL); + + cnt++; + + DP(BNX2X_MSG_SP, "Deleting MAC. %d left\n", + p->mcast_list_len - i - 1); + } + + *line_idx = cnt; +} + +/** + * bnx2x_mcast_handle_current_cmd - + * + * @bp: device handle + * @p: + * @cmd: + * @start_cnt: first line in the ramrod data that may be used + * + * This function is called iff there is enough place for the current command in + * the ramrod data. + * Returns number of lines filled in the ramrod data in total. + */ +static inline int bnx2x_mcast_handle_current_cmd(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd, + int start_cnt) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + int cnt = start_cnt; + + DP(BNX2X_MSG_SP, "p->mcast_list_len=%d\n", p->mcast_list_len); + + switch (cmd) { + case BNX2X_MCAST_CMD_ADD: + bnx2x_mcast_hdl_add(bp, o, p, &cnt); + break; + + case BNX2X_MCAST_CMD_DEL: + bnx2x_mcast_hdl_del(bp, o, p, &cnt); + break; + + case BNX2X_MCAST_CMD_RESTORE: + o->hdl_restore(bp, o, 0, &cnt); + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd); + return -EINVAL; + } + + /* The current command has been handled */ + p->mcast_list_len = 0; + + return cnt; +} + +static int bnx2x_mcast_validate_e2(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + int reg_sz = o->get_registry_size(o); + + switch (cmd) { + /* DEL command deletes all currently configured MACs */ + case BNX2X_MCAST_CMD_DEL: + o->set_registry_size(o, 0); + /* fall through */ + + /* RESTORE command will restore the entire multicast configuration */ + case BNX2X_MCAST_CMD_RESTORE: + /* Here we set the approximate amount of work to do, which in + * fact may be only less as some MACs in postponed ADD + * command(s) scheduled before this command may fall into + * the same bin and the actual number of bins set in the + * registry would be less than we estimated here. See + * bnx2x_mcast_set_one_rule_e2() for further details. + */ + p->mcast_list_len = reg_sz; + break; + + case BNX2X_MCAST_CMD_ADD: + case BNX2X_MCAST_CMD_CONT: + /* Here we assume that all new MACs will fall into new bins. + * However we will correct the real registry size after we + * handle all pending commands. + */ + o->set_registry_size(o, reg_sz + p->mcast_list_len); + break; + + case BNX2X_MCAST_CMD_SET: + /* We can only learn how many commands would actually be used + * when this is being configured. So for now, simply guarantee + * the command will be enqueued [to refrain from adding logic + * that handles this and THEN learns it needs several ramrods]. + * Just like for ADD/Cont, the mcast_list_len might be an over + * estimation; or even more so, since we don't take into + * account the possibility of removal of existing bins. + */ + o->set_registry_size(o, reg_sz + p->mcast_list_len); + o->total_pending_num += o->max_cmd_len; + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd); + return -EINVAL; + } + + /* Increase the total number of MACs pending to be configured */ + o->total_pending_num += p->mcast_list_len; + + return 0; +} + +static void bnx2x_mcast_revert_e2(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + int old_num_bins, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + + o->set_registry_size(o, old_num_bins); + o->total_pending_num -= p->mcast_list_len; + + if (cmd == BNX2X_MCAST_CMD_SET) + o->total_pending_num -= o->max_cmd_len; +} + +/** + * bnx2x_mcast_set_rdata_hdr_e2 - sets a header values + * + * @bp: device handle + * @p: + * @len: number of rules to handle + */ +static inline void bnx2x_mcast_set_rdata_hdr_e2(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + u8 len) +{ + struct bnx2x_raw_obj *r = &p->mcast_obj->raw; + struct eth_multicast_rules_ramrod_data *data = + (struct eth_multicast_rules_ramrod_data *)(r->rdata); + + data->header.echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (BNX2X_FILTER_MCAST_PENDING << + BNX2X_SWCID_SHIFT)); + data->header.rule_cnt = len; +} + +/** + * bnx2x_mcast_refresh_registry_e2 - recalculate the actual number of set bins + * + * @bp: device handle + * @o: + * + * Recalculate the actual number of set bins in the registry using Brian + * Kernighan's algorithm: it's execution complexity is as a number of set bins. + * + * returns 0 for the compliance with bnx2x_mcast_refresh_registry_e1(). + */ +static inline int bnx2x_mcast_refresh_registry_e2(struct bnx2x *bp, + struct bnx2x_mcast_obj *o) +{ + int i, cnt = 0; + u64 elem; + + for (i = 0; i < BNX2X_MCAST_VEC_SZ; i++) { + elem = o->registry.aprox_match.vec[i]; + for (; elem; cnt++) + elem &= elem - 1; + } + + o->set_registry_size(o, cnt); + + return 0; +} + +static int bnx2x_mcast_setup_e2(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_raw_obj *raw = &p->mcast_obj->raw; + struct bnx2x_mcast_obj *o = p->mcast_obj; + struct eth_multicast_rules_ramrod_data *data = + (struct eth_multicast_rules_ramrod_data *)(raw->rdata); + int cnt = 0, rc; + + /* Reset the ramrod data buffer */ + memset(data, 0, sizeof(*data)); + + cnt = bnx2x_mcast_handle_pending_cmds_e2(bp, p); + + /* If there are no more pending commands - clear SCHEDULED state */ + if (list_empty(&o->pending_cmds_head)) + o->clear_sched(o); + + /* The below may be true iff there was enough room in ramrod + * data for all pending commands and for the current + * command. Otherwise the current command would have been added + * to the pending commands and p->mcast_list_len would have been + * zeroed. + */ + if (p->mcast_list_len > 0) + cnt = bnx2x_mcast_handle_current_cmd(bp, p, cmd, cnt); + + /* We've pulled out some MACs - update the total number of + * outstanding. + */ + o->total_pending_num -= cnt; + + /* send a ramrod */ + WARN_ON(o->total_pending_num < 0); + WARN_ON(cnt > o->max_cmd_len); + + bnx2x_mcast_set_rdata_hdr_e2(bp, p, (u8)cnt); + + /* Update a registry size if there are no more pending operations. + * + * We don't want to change the value of the registry size if there are + * pending operations because we want it to always be equal to the + * exact or the approximate number (see bnx2x_mcast_validate_e2()) of + * set bins after the last requested operation in order to properly + * evaluate the size of the next DEL/RESTORE operation. + * + * Note that we update the registry itself during command(s) handling + * - see bnx2x_mcast_set_one_rule_e2(). That's because for 57712 we + * aggregate multiple commands (ADD/DEL/RESTORE) into one ramrod but + * with a limited amount of update commands (per MAC/bin) and we don't + * know in this scope what the actual state of bins configuration is + * going to be after this ramrod. + */ + if (!o->total_pending_num) + bnx2x_mcast_refresh_registry_e2(bp, o); + + /* If CLEAR_ONLY was requested - don't send a ramrod and clear + * RAMROD_PENDING status immediately. due to the SET option, it's also + * possible that after evaluating the differences there's no need for + * a ramrod. In that case, we can skip it as well. + */ + if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags) || !cnt) { + raw->clear_pending(raw); + return 0; + } else { + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + + /* Send a ramrod */ + rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_MULTICAST_RULES, + raw->cid, U64_HI(raw->rdata_mapping), + U64_LO(raw->rdata_mapping), + ETH_CONNECTION_TYPE); + if (rc) + return rc; + + /* Ramrod completion is pending */ + return 1; + } +} + +static int bnx2x_mcast_validate_e1h(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + if (cmd == BNX2X_MCAST_CMD_SET) { + BNX2X_ERR("Can't use `set' command on e1h!\n"); + return -EINVAL; + } + + /* Mark, that there is a work to do */ + if ((cmd == BNX2X_MCAST_CMD_DEL) || (cmd == BNX2X_MCAST_CMD_RESTORE)) + p->mcast_list_len = 1; + + return 0; +} + +static void bnx2x_mcast_revert_e1h(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + int old_num_bins, + enum bnx2x_mcast_cmd cmd) +{ + /* Do nothing */ +} + +#define BNX2X_57711_SET_MC_FILTER(filter, bit) \ +do { \ + (filter)[(bit) >> 5] |= (1 << ((bit) & 0x1f)); \ +} while (0) + +static inline void bnx2x_mcast_hdl_add_e1h(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, + struct bnx2x_mcast_ramrod_params *p, + u32 *mc_filter) +{ + struct bnx2x_mcast_list_elem *mlist_pos; + int bit; + + list_for_each_entry(mlist_pos, &p->mcast_list, link) { + bit = bnx2x_mcast_bin_from_mac(mlist_pos->mac); + BNX2X_57711_SET_MC_FILTER(mc_filter, bit); + + DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC, bin %d\n", + mlist_pos->mac, bit); + + /* bookkeeping... */ + BIT_VEC64_SET_BIT(o->registry.aprox_match.vec, + bit); + } +} + +static inline void bnx2x_mcast_hdl_restore_e1h(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, struct bnx2x_mcast_ramrod_params *p, + u32 *mc_filter) +{ + int bit; + + for (bit = bnx2x_mcast_get_next_bin(o, 0); + bit >= 0; + bit = bnx2x_mcast_get_next_bin(o, bit + 1)) { + BNX2X_57711_SET_MC_FILTER(mc_filter, bit); + DP(BNX2X_MSG_SP, "About to set bin %d\n", bit); + } +} + +/* On 57711 we write the multicast MACs' approximate match + * table by directly into the TSTORM's internal RAM. So we don't + * really need to handle any tricks to make it work. + */ +static int bnx2x_mcast_setup_e1h(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + int i; + struct bnx2x_mcast_obj *o = p->mcast_obj; + struct bnx2x_raw_obj *r = &o->raw; + + /* If CLEAR_ONLY has been requested - clear the registry + * and clear a pending bit. + */ + if (!test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) { + u32 mc_filter[MC_HASH_SIZE] = {0}; + + /* Set the multicast filter bits before writing it into + * the internal memory. + */ + switch (cmd) { + case BNX2X_MCAST_CMD_ADD: + bnx2x_mcast_hdl_add_e1h(bp, o, p, mc_filter); + break; + + case BNX2X_MCAST_CMD_DEL: + DP(BNX2X_MSG_SP, + "Invalidating multicast MACs configuration\n"); + + /* clear the registry */ + memset(o->registry.aprox_match.vec, 0, + sizeof(o->registry.aprox_match.vec)); + break; + + case BNX2X_MCAST_CMD_RESTORE: + bnx2x_mcast_hdl_restore_e1h(bp, o, p, mc_filter); + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd); + return -EINVAL; + } + + /* Set the mcast filter in the internal memory */ + for (i = 0; i < MC_HASH_SIZE; i++) + REG_WR(bp, MC_HASH_OFFSET(bp, i), mc_filter[i]); + } else + /* clear the registry */ + memset(o->registry.aprox_match.vec, 0, + sizeof(o->registry.aprox_match.vec)); + + /* We are done */ + r->clear_pending(r); + + return 0; +} + +static int bnx2x_mcast_validate_e1(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + int reg_sz = o->get_registry_size(o); + + if (cmd == BNX2X_MCAST_CMD_SET) { + BNX2X_ERR("Can't use `set' command on e1!\n"); + return -EINVAL; + } + + switch (cmd) { + /* DEL command deletes all currently configured MACs */ + case BNX2X_MCAST_CMD_DEL: + o->set_registry_size(o, 0); + /* fall through */ + + /* RESTORE command will restore the entire multicast configuration */ + case BNX2X_MCAST_CMD_RESTORE: + p->mcast_list_len = reg_sz; + DP(BNX2X_MSG_SP, "Command %d, p->mcast_list_len=%d\n", + cmd, p->mcast_list_len); + break; + + case BNX2X_MCAST_CMD_ADD: + case BNX2X_MCAST_CMD_CONT: + /* Multicast MACs on 57710 are configured as unicast MACs and + * there is only a limited number of CAM entries for that + * matter. + */ + if (p->mcast_list_len > o->max_cmd_len) { + BNX2X_ERR("Can't configure more than %d multicast MACs on 57710\n", + o->max_cmd_len); + return -EINVAL; + } + /* Every configured MAC should be cleared if DEL command is + * called. Only the last ADD command is relevant as long as + * every ADD commands overrides the previous configuration. + */ + DP(BNX2X_MSG_SP, "p->mcast_list_len=%d\n", p->mcast_list_len); + if (p->mcast_list_len > 0) + o->set_registry_size(o, p->mcast_list_len); + + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd); + return -EINVAL; + } + + /* We want to ensure that commands are executed one by one for 57710. + * Therefore each none-empty command will consume o->max_cmd_len. + */ + if (p->mcast_list_len) + o->total_pending_num += o->max_cmd_len; + + return 0; +} + +static void bnx2x_mcast_revert_e1(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + int old_num_macs, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + + o->set_registry_size(o, old_num_macs); + + /* If current command hasn't been handled yet and we are + * here means that it's meant to be dropped and we have to + * update the number of outstanding MACs accordingly. + */ + if (p->mcast_list_len) + o->total_pending_num -= o->max_cmd_len; +} + +static void bnx2x_mcast_set_one_rule_e1(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, int idx, + union bnx2x_mcast_config_data *cfg_data, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_raw_obj *r = &o->raw; + struct mac_configuration_cmd *data = + (struct mac_configuration_cmd *)(r->rdata); + + /* copy mac */ + if ((cmd == BNX2X_MCAST_CMD_ADD) || (cmd == BNX2X_MCAST_CMD_RESTORE)) { + bnx2x_set_fw_mac_addr(&data->config_table[idx].msb_mac_addr, + &data->config_table[idx].middle_mac_addr, + &data->config_table[idx].lsb_mac_addr, + cfg_data->mac); + + data->config_table[idx].vlan_id = 0; + data->config_table[idx].pf_id = r->func_id; + data->config_table[idx].clients_bit_vector = + cpu_to_le32(1 << r->cl_id); + + SET_FLAG(data->config_table[idx].flags, + MAC_CONFIGURATION_ENTRY_ACTION_TYPE, + T_ETH_MAC_COMMAND_SET); + } +} + +/** + * bnx2x_mcast_set_rdata_hdr_e1 - set header values in mac_configuration_cmd + * + * @bp: device handle + * @p: + * @len: number of rules to handle + */ +static inline void bnx2x_mcast_set_rdata_hdr_e1(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + u8 len) +{ + struct bnx2x_raw_obj *r = &p->mcast_obj->raw; + struct mac_configuration_cmd *data = + (struct mac_configuration_cmd *)(r->rdata); + + u8 offset = (CHIP_REV_IS_SLOW(bp) ? + BNX2X_MAX_EMUL_MULTI*(1 + r->func_id) : + BNX2X_MAX_MULTICAST*(1 + r->func_id)); + + data->hdr.offset = offset; + data->hdr.client_id = cpu_to_le16(0xff); + data->hdr.echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (BNX2X_FILTER_MCAST_PENDING << + BNX2X_SWCID_SHIFT)); + data->hdr.length = len; +} + +/** + * bnx2x_mcast_handle_restore_cmd_e1 - restore command for 57710 + * + * @bp: device handle + * @o: + * @start_idx: index in the registry to start from + * @rdata_idx: index in the ramrod data to start from + * + * restore command for 57710 is like all other commands - always a stand alone + * command - start_idx and rdata_idx will always be 0. This function will always + * succeed. + * returns -1 to comply with 57712 variant. + */ +static inline int bnx2x_mcast_handle_restore_cmd_e1( + struct bnx2x *bp, struct bnx2x_mcast_obj *o , int start_idx, + int *rdata_idx) +{ + struct bnx2x_mcast_mac_elem *elem; + int i = 0; + union bnx2x_mcast_config_data cfg_data = {NULL}; + + /* go through the registry and configure the MACs from it. */ + list_for_each_entry(elem, &o->registry.exact_match.macs, link) { + cfg_data.mac = &elem->mac[0]; + o->set_one_rule(bp, o, i, &cfg_data, BNX2X_MCAST_CMD_RESTORE); + + i++; + + DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", + cfg_data.mac); + } + + *rdata_idx = i; + + return -1; +} + +static inline int bnx2x_mcast_handle_pending_cmds_e1( + struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p) +{ + struct bnx2x_pending_mcast_cmd *cmd_pos; + struct bnx2x_mcast_mac_elem *pmac_pos; + struct bnx2x_mcast_obj *o = p->mcast_obj; + union bnx2x_mcast_config_data cfg_data = {NULL}; + int cnt = 0; + + /* If nothing to be done - return */ + if (list_empty(&o->pending_cmds_head)) + return 0; + + /* Handle the first command */ + cmd_pos = list_first_entry(&o->pending_cmds_head, + struct bnx2x_pending_mcast_cmd, link); + + switch (cmd_pos->type) { + case BNX2X_MCAST_CMD_ADD: + list_for_each_entry(pmac_pos, &cmd_pos->data.macs_head, link) { + cfg_data.mac = &pmac_pos->mac[0]; + o->set_one_rule(bp, o, cnt, &cfg_data, cmd_pos->type); + + cnt++; + + DP(BNX2X_MSG_SP, "About to configure %pM mcast MAC\n", + pmac_pos->mac); + } + break; + + case BNX2X_MCAST_CMD_DEL: + cnt = cmd_pos->data.macs_num; + DP(BNX2X_MSG_SP, "About to delete %d multicast MACs\n", cnt); + break; + + case BNX2X_MCAST_CMD_RESTORE: + o->hdl_restore(bp, o, 0, &cnt); + break; + + default: + BNX2X_ERR("Unknown command: %d\n", cmd_pos->type); + return -EINVAL; + } + + list_del(&cmd_pos->link); + bnx2x_free_groups(&cmd_pos->group_head); + kfree(cmd_pos); + + return cnt; +} + +/** + * bnx2x_get_fw_mac_addr - revert the bnx2x_set_fw_mac_addr(). + * + * @fw_hi: + * @fw_mid: + * @fw_lo: + * @mac: + */ +static inline void bnx2x_get_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid, + __le16 *fw_lo, u8 *mac) +{ + mac[1] = ((u8 *)fw_hi)[0]; + mac[0] = ((u8 *)fw_hi)[1]; + mac[3] = ((u8 *)fw_mid)[0]; + mac[2] = ((u8 *)fw_mid)[1]; + mac[5] = ((u8 *)fw_lo)[0]; + mac[4] = ((u8 *)fw_lo)[1]; +} + +/** + * bnx2x_mcast_refresh_registry_e1 - + * + * @bp: device handle + * @cnt: + * + * Check the ramrod data first entry flag to see if it's a DELETE or ADD command + * and update the registry correspondingly: if ADD - allocate a memory and add + * the entries to the registry (list), if DELETE - clear the registry and free + * the memory. + */ +static inline int bnx2x_mcast_refresh_registry_e1(struct bnx2x *bp, + struct bnx2x_mcast_obj *o) +{ + struct bnx2x_raw_obj *raw = &o->raw; + struct bnx2x_mcast_mac_elem *elem; + struct mac_configuration_cmd *data = + (struct mac_configuration_cmd *)(raw->rdata); + + /* If first entry contains a SET bit - the command was ADD, + * otherwise - DEL_ALL + */ + if (GET_FLAG(data->config_table[0].flags, + MAC_CONFIGURATION_ENTRY_ACTION_TYPE)) { + int i, len = data->hdr.length; + + /* Break if it was a RESTORE command */ + if (!list_empty(&o->registry.exact_match.macs)) + return 0; + + elem = kcalloc(len, sizeof(*elem), GFP_ATOMIC); + if (!elem) { + BNX2X_ERR("Failed to allocate registry memory\n"); + return -ENOMEM; + } + + for (i = 0; i < len; i++, elem++) { + bnx2x_get_fw_mac_addr( + &data->config_table[i].msb_mac_addr, + &data->config_table[i].middle_mac_addr, + &data->config_table[i].lsb_mac_addr, + elem->mac); + DP(BNX2X_MSG_SP, "Adding registry entry for [%pM]\n", + elem->mac); + list_add_tail(&elem->link, + &o->registry.exact_match.macs); + } + } else { + elem = list_first_entry(&o->registry.exact_match.macs, + struct bnx2x_mcast_mac_elem, link); + DP(BNX2X_MSG_SP, "Deleting a registry\n"); + kfree(elem); + INIT_LIST_HEAD(&o->registry.exact_match.macs); + } + + return 0; +} + +static int bnx2x_mcast_setup_e1(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + struct bnx2x_raw_obj *raw = &o->raw; + struct mac_configuration_cmd *data = + (struct mac_configuration_cmd *)(raw->rdata); + int cnt = 0, i, rc; + + /* Reset the ramrod data buffer */ + memset(data, 0, sizeof(*data)); + + /* First set all entries as invalid */ + for (i = 0; i < o->max_cmd_len ; i++) + SET_FLAG(data->config_table[i].flags, + MAC_CONFIGURATION_ENTRY_ACTION_TYPE, + T_ETH_MAC_COMMAND_INVALIDATE); + + /* Handle pending commands first */ + cnt = bnx2x_mcast_handle_pending_cmds_e1(bp, p); + + /* If there are no more pending commands - clear SCHEDULED state */ + if (list_empty(&o->pending_cmds_head)) + o->clear_sched(o); + + /* The below may be true iff there were no pending commands */ + if (!cnt) + cnt = bnx2x_mcast_handle_current_cmd(bp, p, cmd, 0); + + /* For 57710 every command has o->max_cmd_len length to ensure that + * commands are done one at a time. + */ + o->total_pending_num -= o->max_cmd_len; + + /* send a ramrod */ + + WARN_ON(cnt > o->max_cmd_len); + + /* Set ramrod header (in particular, a number of entries to update) */ + bnx2x_mcast_set_rdata_hdr_e1(bp, p, (u8)cnt); + + /* update a registry: we need the registry contents to be always up + * to date in order to be able to execute a RESTORE opcode. Here + * we use the fact that for 57710 we sent one command at a time + * hence we may take the registry update out of the command handling + * and do it in a simpler way here. + */ + rc = bnx2x_mcast_refresh_registry_e1(bp, o); + if (rc) + return rc; + + /* If CLEAR_ONLY was requested - don't send a ramrod and clear + * RAMROD_PENDING status immediately. + */ + if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) { + raw->clear_pending(raw); + return 0; + } else { + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + + /* Send a ramrod */ + rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, raw->cid, + U64_HI(raw->rdata_mapping), + U64_LO(raw->rdata_mapping), + ETH_CONNECTION_TYPE); + if (rc) + return rc; + + /* Ramrod completion is pending */ + return 1; + } +} + +static int bnx2x_mcast_get_registry_size_exact(struct bnx2x_mcast_obj *o) +{ + return o->registry.exact_match.num_macs_set; +} + +static int bnx2x_mcast_get_registry_size_aprox(struct bnx2x_mcast_obj *o) +{ + return o->registry.aprox_match.num_bins_set; +} + +static void bnx2x_mcast_set_registry_size_exact(struct bnx2x_mcast_obj *o, + int n) +{ + o->registry.exact_match.num_macs_set = n; +} + +static void bnx2x_mcast_set_registry_size_aprox(struct bnx2x_mcast_obj *o, + int n) +{ + o->registry.aprox_match.num_bins_set = n; +} + +int bnx2x_config_mcast(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd) +{ + struct bnx2x_mcast_obj *o = p->mcast_obj; + struct bnx2x_raw_obj *r = &o->raw; + int rc = 0, old_reg_size; + + /* This is needed to recover number of currently configured mcast macs + * in case of failure. + */ + old_reg_size = o->get_registry_size(o); + + /* Do some calculations and checks */ + rc = o->validate(bp, p, cmd); + if (rc) + return rc; + + /* Return if there is no work to do */ + if ((!p->mcast_list_len) && (!o->check_sched(o))) + return 0; + + DP(BNX2X_MSG_SP, "o->total_pending_num=%d p->mcast_list_len=%d o->max_cmd_len=%d\n", + o->total_pending_num, p->mcast_list_len, o->max_cmd_len); + + /* Enqueue the current command to the pending list if we can't complete + * it in the current iteration + */ + if (r->check_pending(r) || + ((o->max_cmd_len > 0) && (o->total_pending_num > o->max_cmd_len))) { + rc = o->enqueue_cmd(bp, p->mcast_obj, p, cmd); + if (rc < 0) + goto error_exit1; + + /* As long as the current command is in a command list we + * don't need to handle it separately. + */ + p->mcast_list_len = 0; + } + + if (!r->check_pending(r)) { + + /* Set 'pending' state */ + r->set_pending(r); + + /* Configure the new classification in the chip */ + rc = o->config_mcast(bp, p, cmd); + if (rc < 0) + goto error_exit2; + + /* Wait for a ramrod completion if was requested */ + if (test_bit(RAMROD_COMP_WAIT, &p->ramrod_flags)) + rc = o->wait_comp(bp, o); + } + + return rc; + +error_exit2: + r->clear_pending(r); + +error_exit1: + o->revert(bp, p, old_reg_size, cmd); + + return rc; +} + +static void bnx2x_mcast_clear_sched(struct bnx2x_mcast_obj *o) +{ + smp_mb__before_atomic(); + clear_bit(o->sched_state, o->raw.pstate); + smp_mb__after_atomic(); +} + +static void bnx2x_mcast_set_sched(struct bnx2x_mcast_obj *o) +{ + smp_mb__before_atomic(); + set_bit(o->sched_state, o->raw.pstate); + smp_mb__after_atomic(); +} + +static bool bnx2x_mcast_check_sched(struct bnx2x_mcast_obj *o) +{ + return !!test_bit(o->sched_state, o->raw.pstate); +} + +static bool bnx2x_mcast_check_pending(struct bnx2x_mcast_obj *o) +{ + return o->raw.check_pending(&o->raw) || o->check_sched(o); +} + +void bnx2x_init_mcast_obj(struct bnx2x *bp, + struct bnx2x_mcast_obj *mcast_obj, + u8 mcast_cl_id, u32 mcast_cid, u8 func_id, + u8 engine_id, void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, bnx2x_obj_type type) +{ + memset(mcast_obj, 0, sizeof(*mcast_obj)); + + bnx2x_init_raw_obj(&mcast_obj->raw, mcast_cl_id, mcast_cid, func_id, + rdata, rdata_mapping, state, pstate, type); + + mcast_obj->engine_id = engine_id; + + INIT_LIST_HEAD(&mcast_obj->pending_cmds_head); + + mcast_obj->sched_state = BNX2X_FILTER_MCAST_SCHED; + mcast_obj->check_sched = bnx2x_mcast_check_sched; + mcast_obj->set_sched = bnx2x_mcast_set_sched; + mcast_obj->clear_sched = bnx2x_mcast_clear_sched; + + if (CHIP_IS_E1(bp)) { + mcast_obj->config_mcast = bnx2x_mcast_setup_e1; + mcast_obj->enqueue_cmd = bnx2x_mcast_enqueue_cmd; + mcast_obj->hdl_restore = + bnx2x_mcast_handle_restore_cmd_e1; + mcast_obj->check_pending = bnx2x_mcast_check_pending; + + if (CHIP_REV_IS_SLOW(bp)) + mcast_obj->max_cmd_len = BNX2X_MAX_EMUL_MULTI; + else + mcast_obj->max_cmd_len = BNX2X_MAX_MULTICAST; + + mcast_obj->wait_comp = bnx2x_mcast_wait; + mcast_obj->set_one_rule = bnx2x_mcast_set_one_rule_e1; + mcast_obj->validate = bnx2x_mcast_validate_e1; + mcast_obj->revert = bnx2x_mcast_revert_e1; + mcast_obj->get_registry_size = + bnx2x_mcast_get_registry_size_exact; + mcast_obj->set_registry_size = + bnx2x_mcast_set_registry_size_exact; + + /* 57710 is the only chip that uses the exact match for mcast + * at the moment. + */ + INIT_LIST_HEAD(&mcast_obj->registry.exact_match.macs); + + } else if (CHIP_IS_E1H(bp)) { + mcast_obj->config_mcast = bnx2x_mcast_setup_e1h; + mcast_obj->enqueue_cmd = NULL; + mcast_obj->hdl_restore = NULL; + mcast_obj->check_pending = bnx2x_mcast_check_pending; + + /* 57711 doesn't send a ramrod, so it has unlimited credit + * for one command. + */ + mcast_obj->max_cmd_len = -1; + mcast_obj->wait_comp = bnx2x_mcast_wait; + mcast_obj->set_one_rule = NULL; + mcast_obj->validate = bnx2x_mcast_validate_e1h; + mcast_obj->revert = bnx2x_mcast_revert_e1h; + mcast_obj->get_registry_size = + bnx2x_mcast_get_registry_size_aprox; + mcast_obj->set_registry_size = + bnx2x_mcast_set_registry_size_aprox; + } else { + mcast_obj->config_mcast = bnx2x_mcast_setup_e2; + mcast_obj->enqueue_cmd = bnx2x_mcast_enqueue_cmd; + mcast_obj->hdl_restore = + bnx2x_mcast_handle_restore_cmd_e2; + mcast_obj->check_pending = bnx2x_mcast_check_pending; + /* TODO: There should be a proper HSI define for this number!!! + */ + mcast_obj->max_cmd_len = 16; + mcast_obj->wait_comp = bnx2x_mcast_wait; + mcast_obj->set_one_rule = bnx2x_mcast_set_one_rule_e2; + mcast_obj->validate = bnx2x_mcast_validate_e2; + mcast_obj->revert = bnx2x_mcast_revert_e2; + mcast_obj->get_registry_size = + bnx2x_mcast_get_registry_size_aprox; + mcast_obj->set_registry_size = + bnx2x_mcast_set_registry_size_aprox; + } +} + +/*************************** Credit handling **********************************/ + +/** + * atomic_add_ifless - add if the result is less than a given value. + * + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...if (v + a) is less than u. + * + * returns true if (v + a) was less than u, and false otherwise. + * + */ +static inline bool __atomic_add_ifless(atomic_t *v, int a, int u) +{ + int c, old; + + c = atomic_read(v); + for (;;) { + if (unlikely(c + a >= u)) + return false; + + old = atomic_cmpxchg((v), c, c + a); + if (likely(old == c)) + break; + c = old; + } + + return true; +} + +/** + * atomic_dec_ifmoe - dec if the result is more or equal than a given value. + * + * @v: pointer of type atomic_t + * @a: the amount to dec from v... + * @u: ...if (v - a) is more or equal than u. + * + * returns true if (v - a) was more or equal than u, and false + * otherwise. + */ +static inline bool __atomic_dec_ifmoe(atomic_t *v, int a, int u) +{ + int c, old; + + c = atomic_read(v); + for (;;) { + if (unlikely(c - a < u)) + return false; + + old = atomic_cmpxchg((v), c, c - a); + if (likely(old == c)) + break; + c = old; + } + + return true; +} + +static bool bnx2x_credit_pool_get(struct bnx2x_credit_pool_obj *o, int cnt) +{ + bool rc; + + smp_mb(); + rc = __atomic_dec_ifmoe(&o->credit, cnt, 0); + smp_mb(); + + return rc; +} + +static bool bnx2x_credit_pool_put(struct bnx2x_credit_pool_obj *o, int cnt) +{ + bool rc; + + smp_mb(); + + /* Don't let to refill if credit + cnt > pool_sz */ + rc = __atomic_add_ifless(&o->credit, cnt, o->pool_sz + 1); + + smp_mb(); + + return rc; +} + +static int bnx2x_credit_pool_check(struct bnx2x_credit_pool_obj *o) +{ + int cur_credit; + + smp_mb(); + cur_credit = atomic_read(&o->credit); + + return cur_credit; +} + +static bool bnx2x_credit_pool_always_true(struct bnx2x_credit_pool_obj *o, + int cnt) +{ + return true; +} + +static bool bnx2x_credit_pool_get_entry( + struct bnx2x_credit_pool_obj *o, + int *offset) +{ + int idx, vec, i; + + *offset = -1; + + /* Find "internal cam-offset" then add to base for this object... */ + for (vec = 0; vec < BNX2X_POOL_VEC_SIZE; vec++) { + + /* Skip the current vector if there are no free entries in it */ + if (!o->pool_mirror[vec]) + continue; + + /* If we've got here we are going to find a free entry */ + for (idx = vec * BIT_VEC64_ELEM_SZ, i = 0; + i < BIT_VEC64_ELEM_SZ; idx++, i++) + + if (BIT_VEC64_TEST_BIT(o->pool_mirror, idx)) { + /* Got one!! */ + BIT_VEC64_CLEAR_BIT(o->pool_mirror, idx); + *offset = o->base_pool_offset + idx; + return true; + } + } + + return false; +} + +static bool bnx2x_credit_pool_put_entry( + struct bnx2x_credit_pool_obj *o, + int offset) +{ + if (offset < o->base_pool_offset) + return false; + + offset -= o->base_pool_offset; + + if (offset >= o->pool_sz) + return false; + + /* Return the entry to the pool */ + BIT_VEC64_SET_BIT(o->pool_mirror, offset); + + return true; +} + +static bool bnx2x_credit_pool_put_entry_always_true( + struct bnx2x_credit_pool_obj *o, + int offset) +{ + return true; +} + +static bool bnx2x_credit_pool_get_entry_always_true( + struct bnx2x_credit_pool_obj *o, + int *offset) +{ + *offset = -1; + return true; +} +/** + * bnx2x_init_credit_pool - initialize credit pool internals. + * + * @p: + * @base: Base entry in the CAM to use. + * @credit: pool size. + * + * If base is negative no CAM entries handling will be performed. + * If credit is negative pool operations will always succeed (unlimited pool). + * + */ +void bnx2x_init_credit_pool(struct bnx2x_credit_pool_obj *p, + int base, int credit) +{ + /* Zero the object first */ + memset(p, 0, sizeof(*p)); + + /* Set the table to all 1s */ + memset(&p->pool_mirror, 0xff, sizeof(p->pool_mirror)); + + /* Init a pool as full */ + atomic_set(&p->credit, credit); + + /* The total poll size */ + p->pool_sz = credit; + + p->base_pool_offset = base; + + /* Commit the change */ + smp_mb(); + + p->check = bnx2x_credit_pool_check; + + /* if pool credit is negative - disable the checks */ + if (credit >= 0) { + p->put = bnx2x_credit_pool_put; + p->get = bnx2x_credit_pool_get; + p->put_entry = bnx2x_credit_pool_put_entry; + p->get_entry = bnx2x_credit_pool_get_entry; + } else { + p->put = bnx2x_credit_pool_always_true; + p->get = bnx2x_credit_pool_always_true; + p->put_entry = bnx2x_credit_pool_put_entry_always_true; + p->get_entry = bnx2x_credit_pool_get_entry_always_true; + } + + /* If base is negative - disable entries handling */ + if (base < 0) { + p->put_entry = bnx2x_credit_pool_put_entry_always_true; + p->get_entry = bnx2x_credit_pool_get_entry_always_true; + } +} + +void bnx2x_init_mac_credit_pool(struct bnx2x *bp, + struct bnx2x_credit_pool_obj *p, u8 func_id, + u8 func_num) +{ +/* TODO: this will be defined in consts as well... */ +#define BNX2X_CAM_SIZE_EMUL 5 + + int cam_sz; + + if (CHIP_IS_E1(bp)) { + /* In E1, Multicast is saved in cam... */ + if (!CHIP_REV_IS_SLOW(bp)) + cam_sz = (MAX_MAC_CREDIT_E1 / 2) - BNX2X_MAX_MULTICAST; + else + cam_sz = BNX2X_CAM_SIZE_EMUL - BNX2X_MAX_EMUL_MULTI; + + bnx2x_init_credit_pool(p, func_id * cam_sz, cam_sz); + + } else if (CHIP_IS_E1H(bp)) { + /* CAM credit is equaly divided between all active functions + * on the PORT!. + */ + if ((func_num > 0)) { + if (!CHIP_REV_IS_SLOW(bp)) + cam_sz = (MAX_MAC_CREDIT_E1H / (2*func_num)); + else + cam_sz = BNX2X_CAM_SIZE_EMUL; + bnx2x_init_credit_pool(p, func_id * cam_sz, cam_sz); + } else { + /* this should never happen! Block MAC operations. */ + bnx2x_init_credit_pool(p, 0, 0); + } + + } else { + + /* CAM credit is equaly divided between all active functions + * on the PATH. + */ + if (func_num > 0) { + if (!CHIP_REV_IS_SLOW(bp)) + cam_sz = PF_MAC_CREDIT_E2(bp, func_num); + else + cam_sz = BNX2X_CAM_SIZE_EMUL; + + /* No need for CAM entries handling for 57712 and + * newer. + */ + bnx2x_init_credit_pool(p, -1, cam_sz); + } else { + /* this should never happen! Block MAC operations. */ + bnx2x_init_credit_pool(p, 0, 0); + } + } +} + +void bnx2x_init_vlan_credit_pool(struct bnx2x *bp, + struct bnx2x_credit_pool_obj *p, + u8 func_id, + u8 func_num) +{ + if (CHIP_IS_E1x(bp)) { + /* There is no VLAN credit in HW on 57710 and 57711 only + * MAC / MAC-VLAN can be set + */ + bnx2x_init_credit_pool(p, 0, -1); + } else { + /* CAM credit is equally divided between all active functions + * on the PATH. + */ + if (func_num > 0) { + int credit = PF_VLAN_CREDIT_E2(bp, func_num); + + bnx2x_init_credit_pool(p, -1/*unused for E2*/, credit); + } else + /* this should never happen! Block VLAN operations. */ + bnx2x_init_credit_pool(p, 0, 0); + } +} + +/****************** RSS Configuration ******************/ +/** + * bnx2x_debug_print_ind_table - prints the indirection table configuration. + * + * @bp: driver handle + * @p: pointer to rss configuration + * + * Prints it when NETIF_MSG_IFUP debug level is configured. + */ +static inline void bnx2x_debug_print_ind_table(struct bnx2x *bp, + struct bnx2x_config_rss_params *p) +{ + int i; + + DP(BNX2X_MSG_SP, "Setting indirection table to:\n"); + DP(BNX2X_MSG_SP, "0x0000: "); + for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++) { + DP_CONT(BNX2X_MSG_SP, "0x%02x ", p->ind_table[i]); + + /* Print 4 bytes in a line */ + if ((i + 1 < T_ETH_INDIRECTION_TABLE_SIZE) && + (((i + 1) & 0x3) == 0)) { + DP_CONT(BNX2X_MSG_SP, "\n"); + DP(BNX2X_MSG_SP, "0x%04x: ", i + 1); + } + } + + DP_CONT(BNX2X_MSG_SP, "\n"); +} + +/** + * bnx2x_setup_rss - configure RSS + * + * @bp: device handle + * @p: rss configuration + * + * sends on UPDATE ramrod for that matter. + */ +static int bnx2x_setup_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *p) +{ + struct bnx2x_rss_config_obj *o = p->rss_obj; + struct bnx2x_raw_obj *r = &o->raw; + struct eth_rss_update_ramrod_data *data = + (struct eth_rss_update_ramrod_data *)(r->rdata); + u16 caps = 0; + u8 rss_mode = 0; + int rc; + + memset(data, 0, sizeof(*data)); + + DP(BNX2X_MSG_SP, "Configuring RSS\n"); + + /* Set an echo field */ + data->echo = cpu_to_le32((r->cid & BNX2X_SWCID_MASK) | + (r->state << BNX2X_SWCID_SHIFT)); + + /* RSS mode */ + if (test_bit(BNX2X_RSS_MODE_DISABLED, &p->rss_flags)) + rss_mode = ETH_RSS_MODE_DISABLED; + else if (test_bit(BNX2X_RSS_MODE_REGULAR, &p->rss_flags)) + rss_mode = ETH_RSS_MODE_REGULAR; + + data->rss_mode = rss_mode; + + DP(BNX2X_MSG_SP, "rss_mode=%d\n", rss_mode); + + /* RSS capabilities */ + if (test_bit(BNX2X_RSS_IPV4, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV4_TCP, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_TCP_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV4_UDP, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_UDP_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV6, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV6_TCP, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_TCP_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV6_UDP, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV4_VXLAN, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_VXLAN_CAPABILITY; + + if (test_bit(BNX2X_RSS_IPV6_VXLAN, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY; + + if (test_bit(BNX2X_RSS_TUNN_INNER_HDRS, &p->rss_flags)) + caps |= ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY; + + /* RSS keys */ + if (test_bit(BNX2X_RSS_SET_SRCH, &p->rss_flags)) { + u8 *dst = (u8 *)(data->rss_key) + sizeof(data->rss_key); + const u8 *src = (const u8 *)p->rss_key; + int i; + + /* Apparently, bnx2x reads this array in reverse order + * We need to byte swap rss_key to comply with Toeplitz specs. + */ + for (i = 0; i < sizeof(data->rss_key); i++) + *--dst = *src++; + + caps |= ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY; + } + + data->capabilities = cpu_to_le16(caps); + + /* Hashing mask */ + data->rss_result_mask = p->rss_result_mask; + + /* RSS engine ID */ + data->rss_engine_id = o->engine_id; + + DP(BNX2X_MSG_SP, "rss_engine_id=%d\n", data->rss_engine_id); + + /* Indirection table */ + memcpy(data->indirection_table, p->ind_table, + T_ETH_INDIRECTION_TABLE_SIZE); + + /* Remember the last configuration */ + memcpy(o->ind_table, p->ind_table, T_ETH_INDIRECTION_TABLE_SIZE); + + /* Print the indirection table */ + if (netif_msg_ifup(bp)) + bnx2x_debug_print_ind_table(bp, p); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + + /* Send a ramrod */ + rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_RSS_UPDATE, r->cid, + U64_HI(r->rdata_mapping), + U64_LO(r->rdata_mapping), + ETH_CONNECTION_TYPE); + + if (rc < 0) + return rc; + + return 1; +} + +void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj, + u8 *ind_table) +{ + memcpy(ind_table, rss_obj->ind_table, sizeof(rss_obj->ind_table)); +} + +int bnx2x_config_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *p) +{ + int rc; + struct bnx2x_rss_config_obj *o = p->rss_obj; + struct bnx2x_raw_obj *r = &o->raw; + + /* Do nothing if only driver cleanup was requested */ + if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) { + DP(BNX2X_MSG_SP, "Not configuring RSS ramrod_flags=%lx\n", + p->ramrod_flags); + return 0; + } + + r->set_pending(r); + + rc = o->config_rss(bp, p); + if (rc < 0) { + r->clear_pending(r); + return rc; + } + + if (test_bit(RAMROD_COMP_WAIT, &p->ramrod_flags)) + rc = r->wait_comp(bp, r); + + return rc; +} + +void bnx2x_init_rss_config_obj(struct bnx2x *bp, + struct bnx2x_rss_config_obj *rss_obj, + u8 cl_id, u32 cid, u8 func_id, u8 engine_id, + void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, + bnx2x_obj_type type) +{ + bnx2x_init_raw_obj(&rss_obj->raw, cl_id, cid, func_id, rdata, + rdata_mapping, state, pstate, type); + + rss_obj->engine_id = engine_id; + rss_obj->config_rss = bnx2x_setup_rss; +} + +/********************** Queue state object ***********************************/ + +/** + * bnx2x_queue_state_change - perform Queue state change transition + * + * @bp: device handle + * @params: parameters to perform the transition + * + * returns 0 in case of successfully completed transition, negative error + * code in case of failure, positive (EBUSY) value if there is a completion + * to that is still pending (possible only if RAMROD_COMP_WAIT is + * not set in params->ramrod_flags for asynchronous commands). + * + */ +int bnx2x_queue_state_change(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + int rc, pending_bit; + unsigned long *pending = &o->pending; + + /* Check that the requested transition is legal */ + rc = o->check_transition(bp, o, params); + if (rc) { + BNX2X_ERR("check transition returned an error. rc %d\n", rc); + return -EINVAL; + } + + /* Set "pending" bit */ + DP(BNX2X_MSG_SP, "pending bit was=%lx\n", o->pending); + pending_bit = o->set_pending(o, params); + DP(BNX2X_MSG_SP, "pending bit now=%lx\n", o->pending); + + /* Don't send a command if only driver cleanup was requested */ + if (test_bit(RAMROD_DRV_CLR_ONLY, ¶ms->ramrod_flags)) + o->complete_cmd(bp, o, pending_bit); + else { + /* Send a ramrod */ + rc = o->send_cmd(bp, params); + if (rc) { + o->next_state = BNX2X_Q_STATE_MAX; + clear_bit(pending_bit, pending); + smp_mb__after_atomic(); + return rc; + } + + if (test_bit(RAMROD_COMP_WAIT, ¶ms->ramrod_flags)) { + rc = o->wait_comp(bp, o, pending_bit); + if (rc) + return rc; + + return 0; + } + } + + return !!test_bit(pending_bit, pending); +} + +static int bnx2x_queue_set_pending(struct bnx2x_queue_sp_obj *obj, + struct bnx2x_queue_state_params *params) +{ + enum bnx2x_queue_cmd cmd = params->cmd, bit; + + /* ACTIVATE and DEACTIVATE commands are implemented on top of + * UPDATE command. + */ + if ((cmd == BNX2X_Q_CMD_ACTIVATE) || + (cmd == BNX2X_Q_CMD_DEACTIVATE)) + bit = BNX2X_Q_CMD_UPDATE; + else + bit = cmd; + + set_bit(bit, &obj->pending); + return bit; +} + +static int bnx2x_queue_wait_comp(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + enum bnx2x_queue_cmd cmd) +{ + return bnx2x_state_wait(bp, cmd, &o->pending); +} + +/** + * bnx2x_queue_comp_cmd - complete the state change command. + * + * @bp: device handle + * @o: + * @cmd: + * + * Checks that the arrived completion is expected. + */ +static int bnx2x_queue_comp_cmd(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + enum bnx2x_queue_cmd cmd) +{ + unsigned long cur_pending = o->pending; + + if (!test_and_clear_bit(cmd, &cur_pending)) { + BNX2X_ERR("Bad MC reply %d for queue %d in state %d pending 0x%lx, next_state %d\n", + cmd, o->cids[BNX2X_PRIMARY_CID_INDEX], + o->state, cur_pending, o->next_state); + return -EINVAL; + } + + if (o->next_tx_only >= o->max_cos) + /* >= because tx only must always be smaller than cos since the + * primary connection supports COS 0 + */ + BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d", + o->next_tx_only, o->max_cos); + + DP(BNX2X_MSG_SP, + "Completing command %d for queue %d, setting state to %d\n", + cmd, o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_state); + + if (o->next_tx_only) /* print num tx-only if any exist */ + DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d\n", + o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_tx_only); + + o->state = o->next_state; + o->num_tx_only = o->next_tx_only; + o->next_state = BNX2X_Q_STATE_MAX; + + /* It's important that o->state and o->next_state are + * updated before o->pending. + */ + wmb(); + + clear_bit(cmd, &o->pending); + smp_mb__after_atomic(); + + return 0; +} + +static void bnx2x_q_fill_setup_data_e2(struct bnx2x *bp, + struct bnx2x_queue_state_params *cmd_params, + struct client_init_ramrod_data *data) +{ + struct bnx2x_queue_setup_params *params = &cmd_params->params.setup; + + /* Rx data */ + + /* IPv6 TPA supported for E2 and above only */ + data->rx.tpa_en |= test_bit(BNX2X_Q_FLG_TPA_IPV6, ¶ms->flags) * + CLIENT_INIT_RX_DATA_TPA_EN_IPV6; +} + +static void bnx2x_q_fill_init_general_data(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + struct bnx2x_general_setup_params *params, + struct client_init_general_data *gen_data, + unsigned long *flags) +{ + gen_data->client_id = o->cl_id; + + if (test_bit(BNX2X_Q_FLG_STATS, flags)) { + gen_data->statistics_counter_id = + params->stat_id; + gen_data->statistics_en_flg = 1; + gen_data->statistics_zero_flg = + test_bit(BNX2X_Q_FLG_ZERO_STATS, flags); + } else + gen_data->statistics_counter_id = + DISABLE_STATISTIC_COUNTER_ID_VALUE; + + gen_data->is_fcoe_flg = test_bit(BNX2X_Q_FLG_FCOE, flags); + gen_data->activate_flg = test_bit(BNX2X_Q_FLG_ACTIVE, flags); + gen_data->sp_client_id = params->spcl_id; + gen_data->mtu = cpu_to_le16(params->mtu); + gen_data->func_id = o->func_id; + + gen_data->cos = params->cos; + + gen_data->traffic_type = + test_bit(BNX2X_Q_FLG_FCOE, flags) ? + LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW; + + gen_data->fp_hsi_ver = params->fp_hsi; + + DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d\n", + gen_data->activate_flg, gen_data->cos, gen_data->statistics_en_flg); +} + +static void bnx2x_q_fill_init_tx_data(struct bnx2x_queue_sp_obj *o, + struct bnx2x_txq_setup_params *params, + struct client_init_tx_data *tx_data, + unsigned long *flags) +{ + tx_data->enforce_security_flg = + test_bit(BNX2X_Q_FLG_TX_SEC, flags); + tx_data->default_vlan = + cpu_to_le16(params->default_vlan); + tx_data->default_vlan_flg = + test_bit(BNX2X_Q_FLG_DEF_VLAN, flags); + tx_data->tx_switching_flg = + test_bit(BNX2X_Q_FLG_TX_SWITCH, flags); + tx_data->anti_spoofing_flg = + test_bit(BNX2X_Q_FLG_ANTI_SPOOF, flags); + tx_data->force_default_pri_flg = + test_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, flags); + tx_data->refuse_outband_vlan_flg = + test_bit(BNX2X_Q_FLG_REFUSE_OUTBAND_VLAN, flags); + tx_data->tunnel_lso_inc_ip_id = + test_bit(BNX2X_Q_FLG_TUN_INC_INNER_IP_ID, flags); + tx_data->tunnel_non_lso_pcsum_location = + test_bit(BNX2X_Q_FLG_PCSUM_ON_PKT, flags) ? CSUM_ON_PKT : + CSUM_ON_BD; + + tx_data->tx_status_block_id = params->fw_sb_id; + tx_data->tx_sb_index_number = params->sb_cq_index; + tx_data->tss_leading_client_id = params->tss_leading_cl_id; + + tx_data->tx_bd_page_base.lo = + cpu_to_le32(U64_LO(params->dscr_map)); + tx_data->tx_bd_page_base.hi = + cpu_to_le32(U64_HI(params->dscr_map)); + + /* Don't configure any Tx switching mode during queue SETUP */ + tx_data->state = 0; +} + +static void bnx2x_q_fill_init_pause_data(struct bnx2x_queue_sp_obj *o, + struct rxq_pause_params *params, + struct client_init_rx_data *rx_data) +{ + /* flow control data */ + rx_data->cqe_pause_thr_low = cpu_to_le16(params->rcq_th_lo); + rx_data->cqe_pause_thr_high = cpu_to_le16(params->rcq_th_hi); + rx_data->bd_pause_thr_low = cpu_to_le16(params->bd_th_lo); + rx_data->bd_pause_thr_high = cpu_to_le16(params->bd_th_hi); + rx_data->sge_pause_thr_low = cpu_to_le16(params->sge_th_lo); + rx_data->sge_pause_thr_high = cpu_to_le16(params->sge_th_hi); + rx_data->rx_cos_mask = cpu_to_le16(params->pri_map); +} + +static void bnx2x_q_fill_init_rx_data(struct bnx2x_queue_sp_obj *o, + struct bnx2x_rxq_setup_params *params, + struct client_init_rx_data *rx_data, + unsigned long *flags) +{ + rx_data->tpa_en = test_bit(BNX2X_Q_FLG_TPA, flags) * + CLIENT_INIT_RX_DATA_TPA_EN_IPV4; + rx_data->tpa_en |= test_bit(BNX2X_Q_FLG_TPA_GRO, flags) * + CLIENT_INIT_RX_DATA_TPA_MODE; + rx_data->vmqueue_mode_en_flg = 0; + + rx_data->cache_line_alignment_log_size = + params->cache_line_log; + rx_data->enable_dynamic_hc = + test_bit(BNX2X_Q_FLG_DHC, flags); + rx_data->max_sges_for_packet = params->max_sges_pkt; + rx_data->client_qzone_id = params->cl_qzone_id; + rx_data->max_agg_size = cpu_to_le16(params->tpa_agg_sz); + + /* Always start in DROP_ALL mode */ + rx_data->state = cpu_to_le16(CLIENT_INIT_RX_DATA_UCAST_DROP_ALL | + CLIENT_INIT_RX_DATA_MCAST_DROP_ALL); + + /* We don't set drop flags */ + rx_data->drop_ip_cs_err_flg = 0; + rx_data->drop_tcp_cs_err_flg = 0; + rx_data->drop_ttl0_flg = 0; + rx_data->drop_udp_cs_err_flg = 0; + rx_data->inner_vlan_removal_enable_flg = + test_bit(BNX2X_Q_FLG_VLAN, flags); + rx_data->outer_vlan_removal_enable_flg = + test_bit(BNX2X_Q_FLG_OV, flags); + rx_data->status_block_id = params->fw_sb_id; + rx_data->rx_sb_index_number = params->sb_cq_index; + rx_data->max_tpa_queues = params->max_tpa_queues; + rx_data->max_bytes_on_bd = cpu_to_le16(params->buf_sz); + rx_data->sge_buff_size = cpu_to_le16(params->sge_buf_sz); + rx_data->bd_page_base.lo = + cpu_to_le32(U64_LO(params->dscr_map)); + rx_data->bd_page_base.hi = + cpu_to_le32(U64_HI(params->dscr_map)); + rx_data->sge_page_base.lo = + cpu_to_le32(U64_LO(params->sge_map)); + rx_data->sge_page_base.hi = + cpu_to_le32(U64_HI(params->sge_map)); + rx_data->cqe_page_base.lo = + cpu_to_le32(U64_LO(params->rcq_map)); + rx_data->cqe_page_base.hi = + cpu_to_le32(U64_HI(params->rcq_map)); + rx_data->is_leading_rss = test_bit(BNX2X_Q_FLG_LEADING_RSS, flags); + + if (test_bit(BNX2X_Q_FLG_MCAST, flags)) { + rx_data->approx_mcast_engine_id = params->mcast_engine_id; + rx_data->is_approx_mcast = 1; + } + + rx_data->rss_engine_id = params->rss_engine_id; + + /* silent vlan removal */ + rx_data->silent_vlan_removal_flg = + test_bit(BNX2X_Q_FLG_SILENT_VLAN_REM, flags); + rx_data->silent_vlan_value = + cpu_to_le16(params->silent_removal_value); + rx_data->silent_vlan_mask = + cpu_to_le16(params->silent_removal_mask); +} + +/* initialize the general, tx and rx parts of a queue object */ +static void bnx2x_q_fill_setup_data_cmn(struct bnx2x *bp, + struct bnx2x_queue_state_params *cmd_params, + struct client_init_ramrod_data *data) +{ + bnx2x_q_fill_init_general_data(bp, cmd_params->q_obj, + &cmd_params->params.setup.gen_params, + &data->general, + &cmd_params->params.setup.flags); + + bnx2x_q_fill_init_tx_data(cmd_params->q_obj, + &cmd_params->params.setup.txq_params, + &data->tx, + &cmd_params->params.setup.flags); + + bnx2x_q_fill_init_rx_data(cmd_params->q_obj, + &cmd_params->params.setup.rxq_params, + &data->rx, + &cmd_params->params.setup.flags); + + bnx2x_q_fill_init_pause_data(cmd_params->q_obj, + &cmd_params->params.setup.pause_params, + &data->rx); +} + +/* initialize the general and tx parts of a tx-only queue object */ +static void bnx2x_q_fill_setup_tx_only(struct bnx2x *bp, + struct bnx2x_queue_state_params *cmd_params, + struct tx_queue_init_ramrod_data *data) +{ + bnx2x_q_fill_init_general_data(bp, cmd_params->q_obj, + &cmd_params->params.tx_only.gen_params, + &data->general, + &cmd_params->params.tx_only.flags); + + bnx2x_q_fill_init_tx_data(cmd_params->q_obj, + &cmd_params->params.tx_only.txq_params, + &data->tx, + &cmd_params->params.tx_only.flags); + + DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x", + cmd_params->q_obj->cids[0], + data->tx.tx_bd_page_base.lo, + data->tx.tx_bd_page_base.hi); +} + +/** + * bnx2x_q_init - init HW/FW queue + * + * @bp: device handle + * @params: + * + * HW/FW initial Queue configuration: + * - HC: Rx and Tx + * - CDU context validation + * + */ +static inline int bnx2x_q_init(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + struct bnx2x_queue_init_params *init = ¶ms->params.init; + u16 hc_usec; + u8 cos; + + /* Tx HC configuration */ + if (test_bit(BNX2X_Q_TYPE_HAS_TX, &o->type) && + test_bit(BNX2X_Q_FLG_HC, &init->tx.flags)) { + hc_usec = init->tx.hc_rate ? 1000000 / init->tx.hc_rate : 0; + + bnx2x_update_coalesce_sb_index(bp, init->tx.fw_sb_id, + init->tx.sb_cq_index, + !test_bit(BNX2X_Q_FLG_HC_EN, &init->tx.flags), + hc_usec); + } + + /* Rx HC configuration */ + if (test_bit(BNX2X_Q_TYPE_HAS_RX, &o->type) && + test_bit(BNX2X_Q_FLG_HC, &init->rx.flags)) { + hc_usec = init->rx.hc_rate ? 1000000 / init->rx.hc_rate : 0; + + bnx2x_update_coalesce_sb_index(bp, init->rx.fw_sb_id, + init->rx.sb_cq_index, + !test_bit(BNX2X_Q_FLG_HC_EN, &init->rx.flags), + hc_usec); + } + + /* Set CDU context validation values */ + for (cos = 0; cos < o->max_cos; cos++) { + DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d\n", + o->cids[cos], cos); + DP(BNX2X_MSG_SP, "context pointer %p\n", init->cxts[cos]); + bnx2x_set_ctx_validation(bp, init->cxts[cos], o->cids[cos]); + } + + /* As no ramrod is sent, complete the command immediately */ + o->complete_cmd(bp, o, BNX2X_Q_CMD_INIT); + + mmiowb(); + smp_mb(); + + return 0; +} + +static inline int bnx2x_q_send_setup_e1x(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + struct client_init_ramrod_data *rdata = + (struct client_init_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + int ramrod = RAMROD_CMD_ID_ETH_CLIENT_SETUP; + + /* Clear the ramrod data */ + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data */ + bnx2x_q_fill_setup_data_cmn(bp, params, rdata); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX], + U64_HI(data_mapping), + U64_LO(data_mapping), ETH_CONNECTION_TYPE); +} + +static inline int bnx2x_q_send_setup_e2(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + struct client_init_ramrod_data *rdata = + (struct client_init_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + int ramrod = RAMROD_CMD_ID_ETH_CLIENT_SETUP; + + /* Clear the ramrod data */ + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data */ + bnx2x_q_fill_setup_data_cmn(bp, params, rdata); + bnx2x_q_fill_setup_data_e2(bp, params, rdata); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX], + U64_HI(data_mapping), + U64_LO(data_mapping), ETH_CONNECTION_TYPE); +} + +static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + struct tx_queue_init_ramrod_data *rdata = + (struct tx_queue_init_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + int ramrod = RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP; + struct bnx2x_queue_setup_tx_only_params *tx_only_params = + ¶ms->params.tx_only; + u8 cid_index = tx_only_params->cid_index; + + if (cid_index >= o->max_cos) { + BNX2X_ERR("queue[%d]: cid_index (%d) is out of range\n", + o->cl_id, cid_index); + return -EINVAL; + } + + DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d\n", + tx_only_params->gen_params.cos, + tx_only_params->gen_params.spcl_id); + + /* Clear the ramrod data */ + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data */ + bnx2x_q_fill_setup_tx_only(bp, params, rdata); + + DP(BNX2X_MSG_SP, "sending tx-only ramrod: cid %d, client-id %d, sp-client id %d, cos %d\n", + o->cids[cid_index], rdata->general.client_id, + rdata->general.sp_client_id, rdata->general.cos); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, ramrod, o->cids[cid_index], + U64_HI(data_mapping), + U64_LO(data_mapping), ETH_CONNECTION_TYPE); +} + +static void bnx2x_q_fill_update_data(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj, + struct bnx2x_queue_update_params *params, + struct client_update_ramrod_data *data) +{ + /* Client ID of the client to update */ + data->client_id = obj->cl_id; + + /* Function ID of the client to update */ + data->func_id = obj->func_id; + + /* Default VLAN value */ + data->default_vlan = cpu_to_le16(params->def_vlan); + + /* Inner VLAN stripping */ + data->inner_vlan_removal_enable_flg = + test_bit(BNX2X_Q_UPDATE_IN_VLAN_REM, ¶ms->update_flags); + data->inner_vlan_removal_change_flg = + test_bit(BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG, + ¶ms->update_flags); + + /* Outer VLAN stripping */ + data->outer_vlan_removal_enable_flg = + test_bit(BNX2X_Q_UPDATE_OUT_VLAN_REM, ¶ms->update_flags); + data->outer_vlan_removal_change_flg = + test_bit(BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG, + ¶ms->update_flags); + + /* Drop packets that have source MAC that doesn't belong to this + * Queue. + */ + data->anti_spoofing_enable_flg = + test_bit(BNX2X_Q_UPDATE_ANTI_SPOOF, ¶ms->update_flags); + data->anti_spoofing_change_flg = + test_bit(BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG, ¶ms->update_flags); + + /* Activate/Deactivate */ + data->activate_flg = + test_bit(BNX2X_Q_UPDATE_ACTIVATE, ¶ms->update_flags); + data->activate_change_flg = + test_bit(BNX2X_Q_UPDATE_ACTIVATE_CHNG, ¶ms->update_flags); + + /* Enable default VLAN */ + data->default_vlan_enable_flg = + test_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, ¶ms->update_flags); + data->default_vlan_change_flg = + test_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, + ¶ms->update_flags); + + /* silent vlan removal */ + data->silent_vlan_change_flg = + test_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + ¶ms->update_flags); + data->silent_vlan_removal_flg = + test_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, ¶ms->update_flags); + data->silent_vlan_value = cpu_to_le16(params->silent_removal_value); + data->silent_vlan_mask = cpu_to_le16(params->silent_removal_mask); + + /* tx switching */ + data->tx_switching_flg = + test_bit(BNX2X_Q_UPDATE_TX_SWITCHING, ¶ms->update_flags); + data->tx_switching_change_flg = + test_bit(BNX2X_Q_UPDATE_TX_SWITCHING_CHNG, + ¶ms->update_flags); + + /* PTP */ + data->handle_ptp_pkts_flg = + test_bit(BNX2X_Q_UPDATE_PTP_PKTS, ¶ms->update_flags); + data->handle_ptp_pkts_change_flg = + test_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, ¶ms->update_flags); +} + +static inline int bnx2x_q_send_update(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + struct client_update_ramrod_data *rdata = + (struct client_update_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_queue_update_params *update_params = + ¶ms->params.update; + u8 cid_index = update_params->cid_index; + + if (cid_index >= o->max_cos) { + BNX2X_ERR("queue[%d]: cid_index (%d) is out of range\n", + o->cl_id, cid_index); + return -EINVAL; + } + + /* Clear the ramrod data */ + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data */ + bnx2x_q_fill_update_data(bp, o, update_params, rdata); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_UPDATE, + o->cids[cid_index], U64_HI(data_mapping), + U64_LO(data_mapping), ETH_CONNECTION_TYPE); +} + +/** + * bnx2x_q_send_deactivate - send DEACTIVATE command + * + * @bp: device handle + * @params: + * + * implemented using the UPDATE command. + */ +static inline int bnx2x_q_send_deactivate(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_update_params *update = ¶ms->params.update; + + memset(update, 0, sizeof(*update)); + + __set_bit(BNX2X_Q_UPDATE_ACTIVATE_CHNG, &update->update_flags); + + return bnx2x_q_send_update(bp, params); +} + +/** + * bnx2x_q_send_activate - send ACTIVATE command + * + * @bp: device handle + * @params: + * + * implemented using the UPDATE command. + */ +static inline int bnx2x_q_send_activate(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_update_params *update = ¶ms->params.update; + + memset(update, 0, sizeof(*update)); + + __set_bit(BNX2X_Q_UPDATE_ACTIVATE, &update->update_flags); + __set_bit(BNX2X_Q_UPDATE_ACTIVATE_CHNG, &update->update_flags); + + return bnx2x_q_send_update(bp, params); +} + +static void bnx2x_q_fill_update_tpa_data(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj, + struct bnx2x_queue_update_tpa_params *params, + struct tpa_update_ramrod_data *data) +{ + data->client_id = obj->cl_id; + data->complete_on_both_clients = params->complete_on_both_clients; + data->dont_verify_rings_pause_thr_flg = + params->dont_verify_thr; + data->max_agg_size = cpu_to_le16(params->max_agg_sz); + data->max_sges_for_packet = params->max_sges_pkt; + data->max_tpa_queues = params->max_tpa_queues; + data->sge_buff_size = cpu_to_le16(params->sge_buff_sz); + data->sge_page_base_hi = cpu_to_le32(U64_HI(params->sge_map)); + data->sge_page_base_lo = cpu_to_le32(U64_LO(params->sge_map)); + data->sge_pause_thr_high = cpu_to_le16(params->sge_pause_thr_high); + data->sge_pause_thr_low = cpu_to_le16(params->sge_pause_thr_low); + data->tpa_mode = params->tpa_mode; + data->update_ipv4 = params->update_ipv4; + data->update_ipv6 = params->update_ipv6; +} + +static inline int bnx2x_q_send_update_tpa(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + struct tpa_update_ramrod_data *rdata = + (struct tpa_update_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_queue_update_tpa_params *update_tpa_params = + ¶ms->params.update_tpa; + u16 type; + + /* Clear the ramrod data */ + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data */ + bnx2x_q_fill_update_tpa_data(bp, o, update_tpa_params, rdata); + + /* Add the function id inside the type, so that sp post function + * doesn't automatically add the PF func-id, this is required + * for operations done by PFs on behalf of their VFs + */ + type = ETH_CONNECTION_TYPE | + ((o->func_id) << SPE_HDR_FUNCTION_ID_SHIFT); + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_TPA_UPDATE, + o->cids[BNX2X_PRIMARY_CID_INDEX], + U64_HI(data_mapping), + U64_LO(data_mapping), type); +} + +static inline int bnx2x_q_send_halt(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, + o->cids[BNX2X_PRIMARY_CID_INDEX], 0, o->cl_id, + ETH_CONNECTION_TYPE); +} + +static inline int bnx2x_q_send_cfc_del(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + u8 cid_idx = params->params.cfc_del.cid_index; + + if (cid_idx >= o->max_cos) { + BNX2X_ERR("queue[%d]: cid_index (%d) is out of range\n", + o->cl_id, cid_idx); + return -EINVAL; + } + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_CFC_DEL, + o->cids[cid_idx], 0, 0, NONE_CONNECTION_TYPE); +} + +static inline int bnx2x_q_send_terminate(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + u8 cid_index = params->params.terminate.cid_index; + + if (cid_index >= o->max_cos) { + BNX2X_ERR("queue[%d]: cid_index (%d) is out of range\n", + o->cl_id, cid_index); + return -EINVAL; + } + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_TERMINATE, + o->cids[cid_index], 0, 0, ETH_CONNECTION_TYPE); +} + +static inline int bnx2x_q_send_empty(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + struct bnx2x_queue_sp_obj *o = params->q_obj; + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_EMPTY, + o->cids[BNX2X_PRIMARY_CID_INDEX], 0, 0, + ETH_CONNECTION_TYPE); +} + +static inline int bnx2x_queue_send_cmd_cmn(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + switch (params->cmd) { + case BNX2X_Q_CMD_INIT: + return bnx2x_q_init(bp, params); + case BNX2X_Q_CMD_SETUP_TX_ONLY: + return bnx2x_q_send_setup_tx_only(bp, params); + case BNX2X_Q_CMD_DEACTIVATE: + return bnx2x_q_send_deactivate(bp, params); + case BNX2X_Q_CMD_ACTIVATE: + return bnx2x_q_send_activate(bp, params); + case BNX2X_Q_CMD_UPDATE: + return bnx2x_q_send_update(bp, params); + case BNX2X_Q_CMD_UPDATE_TPA: + return bnx2x_q_send_update_tpa(bp, params); + case BNX2X_Q_CMD_HALT: + return bnx2x_q_send_halt(bp, params); + case BNX2X_Q_CMD_CFC_DEL: + return bnx2x_q_send_cfc_del(bp, params); + case BNX2X_Q_CMD_TERMINATE: + return bnx2x_q_send_terminate(bp, params); + case BNX2X_Q_CMD_EMPTY: + return bnx2x_q_send_empty(bp, params); + default: + BNX2X_ERR("Unknown command: %d\n", params->cmd); + return -EINVAL; + } +} + +static int bnx2x_queue_send_cmd_e1x(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + switch (params->cmd) { + case BNX2X_Q_CMD_SETUP: + return bnx2x_q_send_setup_e1x(bp, params); + case BNX2X_Q_CMD_INIT: + case BNX2X_Q_CMD_SETUP_TX_ONLY: + case BNX2X_Q_CMD_DEACTIVATE: + case BNX2X_Q_CMD_ACTIVATE: + case BNX2X_Q_CMD_UPDATE: + case BNX2X_Q_CMD_UPDATE_TPA: + case BNX2X_Q_CMD_HALT: + case BNX2X_Q_CMD_CFC_DEL: + case BNX2X_Q_CMD_TERMINATE: + case BNX2X_Q_CMD_EMPTY: + return bnx2x_queue_send_cmd_cmn(bp, params); + default: + BNX2X_ERR("Unknown command: %d\n", params->cmd); + return -EINVAL; + } +} + +static int bnx2x_queue_send_cmd_e2(struct bnx2x *bp, + struct bnx2x_queue_state_params *params) +{ + switch (params->cmd) { + case BNX2X_Q_CMD_SETUP: + return bnx2x_q_send_setup_e2(bp, params); + case BNX2X_Q_CMD_INIT: + case BNX2X_Q_CMD_SETUP_TX_ONLY: + case BNX2X_Q_CMD_DEACTIVATE: + case BNX2X_Q_CMD_ACTIVATE: + case BNX2X_Q_CMD_UPDATE: + case BNX2X_Q_CMD_UPDATE_TPA: + case BNX2X_Q_CMD_HALT: + case BNX2X_Q_CMD_CFC_DEL: + case BNX2X_Q_CMD_TERMINATE: + case BNX2X_Q_CMD_EMPTY: + return bnx2x_queue_send_cmd_cmn(bp, params); + default: + BNX2X_ERR("Unknown command: %d\n", params->cmd); + return -EINVAL; + } +} + +/** + * bnx2x_queue_chk_transition - check state machine of a regular Queue + * + * @bp: device handle + * @o: + * @params: + * + * (not Forwarding) + * It both checks if the requested command is legal in a current + * state and, if it's legal, sets a `next_state' in the object + * that will be used in the completion flow to set the `state' + * of the object. + * + * returns 0 if a requested command is a legal transition, + * -EINVAL otherwise. + */ +static int bnx2x_queue_chk_transition(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + struct bnx2x_queue_state_params *params) +{ + enum bnx2x_q_state state = o->state, next_state = BNX2X_Q_STATE_MAX; + enum bnx2x_queue_cmd cmd = params->cmd; + struct bnx2x_queue_update_params *update_params = + ¶ms->params.update; + u8 next_tx_only = o->num_tx_only; + + /* Forget all pending for completion commands if a driver only state + * transition has been requested. + */ + if (test_bit(RAMROD_DRV_CLR_ONLY, ¶ms->ramrod_flags)) { + o->pending = 0; + o->next_state = BNX2X_Q_STATE_MAX; + } + + /* Don't allow a next state transition if we are in the middle of + * the previous one. + */ + if (o->pending) { + BNX2X_ERR("Blocking transition since pending was %lx\n", + o->pending); + return -EBUSY; + } + + switch (state) { + case BNX2X_Q_STATE_RESET: + if (cmd == BNX2X_Q_CMD_INIT) + next_state = BNX2X_Q_STATE_INITIALIZED; + + break; + case BNX2X_Q_STATE_INITIALIZED: + if (cmd == BNX2X_Q_CMD_SETUP) { + if (test_bit(BNX2X_Q_FLG_ACTIVE, + ¶ms->params.setup.flags)) + next_state = BNX2X_Q_STATE_ACTIVE; + else + next_state = BNX2X_Q_STATE_INACTIVE; + } + + break; + case BNX2X_Q_STATE_ACTIVE: + if (cmd == BNX2X_Q_CMD_DEACTIVATE) + next_state = BNX2X_Q_STATE_INACTIVE; + + else if ((cmd == BNX2X_Q_CMD_EMPTY) || + (cmd == BNX2X_Q_CMD_UPDATE_TPA)) + next_state = BNX2X_Q_STATE_ACTIVE; + + else if (cmd == BNX2X_Q_CMD_SETUP_TX_ONLY) { + next_state = BNX2X_Q_STATE_MULTI_COS; + next_tx_only = 1; + } + + else if (cmd == BNX2X_Q_CMD_HALT) + next_state = BNX2X_Q_STATE_STOPPED; + + else if (cmd == BNX2X_Q_CMD_UPDATE) { + /* If "active" state change is requested, update the + * state accordingly. + */ + if (test_bit(BNX2X_Q_UPDATE_ACTIVATE_CHNG, + &update_params->update_flags) && + !test_bit(BNX2X_Q_UPDATE_ACTIVATE, + &update_params->update_flags)) + next_state = BNX2X_Q_STATE_INACTIVE; + else + next_state = BNX2X_Q_STATE_ACTIVE; + } + + break; + case BNX2X_Q_STATE_MULTI_COS: + if (cmd == BNX2X_Q_CMD_TERMINATE) + next_state = BNX2X_Q_STATE_MCOS_TERMINATED; + + else if (cmd == BNX2X_Q_CMD_SETUP_TX_ONLY) { + next_state = BNX2X_Q_STATE_MULTI_COS; + next_tx_only = o->num_tx_only + 1; + } + + else if ((cmd == BNX2X_Q_CMD_EMPTY) || + (cmd == BNX2X_Q_CMD_UPDATE_TPA)) + next_state = BNX2X_Q_STATE_MULTI_COS; + + else if (cmd == BNX2X_Q_CMD_UPDATE) { + /* If "active" state change is requested, update the + * state accordingly. + */ + if (test_bit(BNX2X_Q_UPDATE_ACTIVATE_CHNG, + &update_params->update_flags) && + !test_bit(BNX2X_Q_UPDATE_ACTIVATE, + &update_params->update_flags)) + next_state = BNX2X_Q_STATE_INACTIVE; + else + next_state = BNX2X_Q_STATE_MULTI_COS; + } + + break; + case BNX2X_Q_STATE_MCOS_TERMINATED: + if (cmd == BNX2X_Q_CMD_CFC_DEL) { + next_tx_only = o->num_tx_only - 1; + if (next_tx_only == 0) + next_state = BNX2X_Q_STATE_ACTIVE; + else + next_state = BNX2X_Q_STATE_MULTI_COS; + } + + break; + case BNX2X_Q_STATE_INACTIVE: + if (cmd == BNX2X_Q_CMD_ACTIVATE) + next_state = BNX2X_Q_STATE_ACTIVE; + + else if ((cmd == BNX2X_Q_CMD_EMPTY) || + (cmd == BNX2X_Q_CMD_UPDATE_TPA)) + next_state = BNX2X_Q_STATE_INACTIVE; + + else if (cmd == BNX2X_Q_CMD_HALT) + next_state = BNX2X_Q_STATE_STOPPED; + + else if (cmd == BNX2X_Q_CMD_UPDATE) { + /* If "active" state change is requested, update the + * state accordingly. + */ + if (test_bit(BNX2X_Q_UPDATE_ACTIVATE_CHNG, + &update_params->update_flags) && + test_bit(BNX2X_Q_UPDATE_ACTIVATE, + &update_params->update_flags)){ + if (o->num_tx_only == 0) + next_state = BNX2X_Q_STATE_ACTIVE; + else /* tx only queues exist for this queue */ + next_state = BNX2X_Q_STATE_MULTI_COS; + } else + next_state = BNX2X_Q_STATE_INACTIVE; + } + + break; + case BNX2X_Q_STATE_STOPPED: + if (cmd == BNX2X_Q_CMD_TERMINATE) + next_state = BNX2X_Q_STATE_TERMINATED; + + break; + case BNX2X_Q_STATE_TERMINATED: + if (cmd == BNX2X_Q_CMD_CFC_DEL) + next_state = BNX2X_Q_STATE_RESET; + + break; + default: + BNX2X_ERR("Illegal state: %d\n", state); + } + + /* Transition is assured */ + if (next_state != BNX2X_Q_STATE_MAX) { + DP(BNX2X_MSG_SP, "Good state transition: %d(%d)->%d\n", + state, cmd, next_state); + o->next_state = next_state; + o->next_tx_only = next_tx_only; + return 0; + } + + DP(BNX2X_MSG_SP, "Bad state transition request: %d %d\n", state, cmd); + + return -EINVAL; +} + +void bnx2x_init_queue_obj(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj, + u8 cl_id, u32 *cids, u8 cid_cnt, u8 func_id, + void *rdata, + dma_addr_t rdata_mapping, unsigned long type) +{ + memset(obj, 0, sizeof(*obj)); + + /* We support only BNX2X_MULTI_TX_COS Tx CoS at the moment */ + BUG_ON(BNX2X_MULTI_TX_COS < cid_cnt); + + memcpy(obj->cids, cids, sizeof(obj->cids[0]) * cid_cnt); + obj->max_cos = cid_cnt; + obj->cl_id = cl_id; + obj->func_id = func_id; + obj->rdata = rdata; + obj->rdata_mapping = rdata_mapping; + obj->type = type; + obj->next_state = BNX2X_Q_STATE_MAX; + + if (CHIP_IS_E1x(bp)) + obj->send_cmd = bnx2x_queue_send_cmd_e1x; + else + obj->send_cmd = bnx2x_queue_send_cmd_e2; + + obj->check_transition = bnx2x_queue_chk_transition; + + obj->complete_cmd = bnx2x_queue_comp_cmd; + obj->wait_comp = bnx2x_queue_wait_comp; + obj->set_pending = bnx2x_queue_set_pending; +} + +/* return a queue object's logical state*/ +int bnx2x_get_q_logical_state(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj) +{ + switch (obj->state) { + case BNX2X_Q_STATE_ACTIVE: + case BNX2X_Q_STATE_MULTI_COS: + return BNX2X_Q_LOGICAL_STATE_ACTIVE; + case BNX2X_Q_STATE_RESET: + case BNX2X_Q_STATE_INITIALIZED: + case BNX2X_Q_STATE_MCOS_TERMINATED: + case BNX2X_Q_STATE_INACTIVE: + case BNX2X_Q_STATE_STOPPED: + case BNX2X_Q_STATE_TERMINATED: + case BNX2X_Q_STATE_FLRED: + return BNX2X_Q_LOGICAL_STATE_STOPPED; + default: + return -EINVAL; + } +} + +/********************** Function state object *********************************/ +enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o) +{ + /* in the middle of transaction - return INVALID state */ + if (o->pending) + return BNX2X_F_STATE_MAX; + + /* unsure the order of reading of o->pending and o->state + * o->pending should be read first + */ + rmb(); + + return o->state; +} + +static int bnx2x_func_wait_comp(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd) +{ + return bnx2x_state_wait(bp, cmd, &o->pending); +} + +/** + * bnx2x_func_state_change_comp - complete the state machine transition + * + * @bp: device handle + * @o: + * @cmd: + * + * Called on state change transition. Completes the state + * machine transition only - no HW interaction. + */ +static inline int bnx2x_func_state_change_comp(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd) +{ + unsigned long cur_pending = o->pending; + + if (!test_and_clear_bit(cmd, &cur_pending)) { + BNX2X_ERR("Bad MC reply %d for func %d in state %d pending 0x%lx, next_state %d\n", + cmd, BP_FUNC(bp), o->state, + cur_pending, o->next_state); + return -EINVAL; + } + + DP(BNX2X_MSG_SP, + "Completing command %d for func %d, setting state to %d\n", + cmd, BP_FUNC(bp), o->next_state); + + o->state = o->next_state; + o->next_state = BNX2X_F_STATE_MAX; + + /* It's important that o->state and o->next_state are + * updated before o->pending. + */ + wmb(); + + clear_bit(cmd, &o->pending); + smp_mb__after_atomic(); + + return 0; +} + +/** + * bnx2x_func_comp_cmd - complete the state change command + * + * @bp: device handle + * @o: + * @cmd: + * + * Checks that the arrived completion is expected. + */ +static int bnx2x_func_comp_cmd(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd) +{ + /* Complete the state machine part first, check if it's a + * legal completion. + */ + int rc = bnx2x_func_state_change_comp(bp, o, cmd); + return rc; +} + +/** + * bnx2x_func_chk_transition - perform function state machine transition + * + * @bp: device handle + * @o: + * @params: + * + * It both checks if the requested command is legal in a current + * state and, if it's legal, sets a `next_state' in the object + * that will be used in the completion flow to set the `state' + * of the object. + * + * returns 0 if a requested command is a legal transition, + * -EINVAL otherwise. + */ +static int bnx2x_func_chk_transition(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + struct bnx2x_func_state_params *params) +{ + enum bnx2x_func_state state = o->state, next_state = BNX2X_F_STATE_MAX; + enum bnx2x_func_cmd cmd = params->cmd; + + /* Forget all pending for completion commands if a driver only state + * transition has been requested. + */ + if (test_bit(RAMROD_DRV_CLR_ONLY, ¶ms->ramrod_flags)) { + o->pending = 0; + o->next_state = BNX2X_F_STATE_MAX; + } + + /* Don't allow a next state transition if we are in the middle of + * the previous one. + */ + if (o->pending) + return -EBUSY; + + switch (state) { + case BNX2X_F_STATE_RESET: + if (cmd == BNX2X_F_CMD_HW_INIT) + next_state = BNX2X_F_STATE_INITIALIZED; + + break; + case BNX2X_F_STATE_INITIALIZED: + if (cmd == BNX2X_F_CMD_START) + next_state = BNX2X_F_STATE_STARTED; + + else if (cmd == BNX2X_F_CMD_HW_RESET) + next_state = BNX2X_F_STATE_RESET; + + break; + case BNX2X_F_STATE_STARTED: + if (cmd == BNX2X_F_CMD_STOP) + next_state = BNX2X_F_STATE_INITIALIZED; + /* afex ramrods can be sent only in started mode, and only + * if not pending for function_stop ramrod completion + * for these events - next state remained STARTED. + */ + else if ((cmd == BNX2X_F_CMD_AFEX_UPDATE) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_STARTED; + + else if ((cmd == BNX2X_F_CMD_AFEX_VIFLISTS) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_STARTED; + + /* Switch_update ramrod can be sent in either started or + * tx_stopped state, and it doesn't change the state. + */ + else if ((cmd == BNX2X_F_CMD_SWITCH_UPDATE) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_STARTED; + + else if ((cmd == BNX2X_F_CMD_SET_TIMESYNC) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_STARTED; + + else if (cmd == BNX2X_F_CMD_TX_STOP) + next_state = BNX2X_F_STATE_TX_STOPPED; + + break; + case BNX2X_F_STATE_TX_STOPPED: + if ((cmd == BNX2X_F_CMD_SWITCH_UPDATE) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_TX_STOPPED; + + else if ((cmd == BNX2X_F_CMD_SET_TIMESYNC) && + (!test_bit(BNX2X_F_CMD_STOP, &o->pending))) + next_state = BNX2X_F_STATE_TX_STOPPED; + + else if (cmd == BNX2X_F_CMD_TX_START) + next_state = BNX2X_F_STATE_STARTED; + + break; + default: + BNX2X_ERR("Unknown state: %d\n", state); + } + + /* Transition is assured */ + if (next_state != BNX2X_F_STATE_MAX) { + DP(BNX2X_MSG_SP, "Good function state transition: %d(%d)->%d\n", + state, cmd, next_state); + o->next_state = next_state; + return 0; + } + + DP(BNX2X_MSG_SP, "Bad function state transition request: %d %d\n", + state, cmd); + + return -EINVAL; +} + +/** + * bnx2x_func_init_func - performs HW init at function stage + * + * @bp: device handle + * @drv: + * + * Init HW when the current phase is + * FW_MSG_CODE_DRV_LOAD_FUNCTION: initialize only FUNCTION-only + * HW blocks. + */ +static inline int bnx2x_func_init_func(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + return drv->init_hw_func(bp); +} + +/** + * bnx2x_func_init_port - performs HW init at port stage + * + * @bp: device handle + * @drv: + * + * Init HW when the current phase is + * FW_MSG_CODE_DRV_LOAD_PORT: initialize PORT-only and + * FUNCTION-only HW blocks. + * + */ +static inline int bnx2x_func_init_port(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + int rc = drv->init_hw_port(bp); + if (rc) + return rc; + + return bnx2x_func_init_func(bp, drv); +} + +/** + * bnx2x_func_init_cmn_chip - performs HW init at chip-common stage + * + * @bp: device handle + * @drv: + * + * Init HW when the current phase is + * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: initialize COMMON_CHIP, + * PORT-only and FUNCTION-only HW blocks. + */ +static inline int bnx2x_func_init_cmn_chip(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + int rc = drv->init_hw_cmn_chip(bp); + if (rc) + return rc; + + return bnx2x_func_init_port(bp, drv); +} + +/** + * bnx2x_func_init_cmn - performs HW init at common stage + * + * @bp: device handle + * @drv: + * + * Init HW when the current phase is + * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: initialize COMMON, + * PORT-only and FUNCTION-only HW blocks. + */ +static inline int bnx2x_func_init_cmn(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + int rc = drv->init_hw_cmn(bp); + if (rc) + return rc; + + return bnx2x_func_init_port(bp, drv); +} + +static int bnx2x_func_hw_init(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + u32 load_code = params->params.hw_init.load_phase; + struct bnx2x_func_sp_obj *o = params->f_obj; + const struct bnx2x_func_sp_drv_ops *drv = o->drv; + int rc = 0; + + DP(BNX2X_MSG_SP, "function %d load_code %x\n", + BP_ABS_FUNC(bp), load_code); + + /* Prepare buffers for unzipping the FW */ + rc = drv->gunzip_init(bp); + if (rc) + return rc; + + /* Prepare FW */ + rc = drv->init_fw(bp); + if (rc) { + BNX2X_ERR("Error loading firmware\n"); + goto init_err; + } + + /* Handle the beginning of COMMON_XXX pases separately... */ + switch (load_code) { + case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: + rc = bnx2x_func_init_cmn_chip(bp, drv); + if (rc) + goto init_err; + + break; + case FW_MSG_CODE_DRV_LOAD_COMMON: + rc = bnx2x_func_init_cmn(bp, drv); + if (rc) + goto init_err; + + break; + case FW_MSG_CODE_DRV_LOAD_PORT: + rc = bnx2x_func_init_port(bp, drv); + if (rc) + goto init_err; + + break; + case FW_MSG_CODE_DRV_LOAD_FUNCTION: + rc = bnx2x_func_init_func(bp, drv); + if (rc) + goto init_err; + + break; + default: + BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code); + rc = -EINVAL; + } + +init_err: + drv->gunzip_end(bp); + + /* In case of success, complete the command immediately: no ramrods + * have been sent. + */ + if (!rc) + o->complete_cmd(bp, o, BNX2X_F_CMD_HW_INIT); + + return rc; +} + +/** + * bnx2x_func_reset_func - reset HW at function stage + * + * @bp: device handle + * @drv: + * + * Reset HW at FW_MSG_CODE_DRV_UNLOAD_FUNCTION stage: reset only + * FUNCTION-only HW blocks. + */ +static inline void bnx2x_func_reset_func(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + drv->reset_hw_func(bp); +} + +/** + * bnx2x_func_reset_port - reset HW at port stage + * + * @bp: device handle + * @drv: + * + * Reset HW at FW_MSG_CODE_DRV_UNLOAD_PORT stage: reset + * FUNCTION-only and PORT-only HW blocks. + * + * !!!IMPORTANT!!! + * + * It's important to call reset_port before reset_func() as the last thing + * reset_func does is pf_disable() thus disabling PGLUE_B, which + * makes impossible any DMAE transactions. + */ +static inline void bnx2x_func_reset_port(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + drv->reset_hw_port(bp); + bnx2x_func_reset_func(bp, drv); +} + +/** + * bnx2x_func_reset_cmn - reset HW at common stage + * + * @bp: device handle + * @drv: + * + * Reset HW at FW_MSG_CODE_DRV_UNLOAD_COMMON and + * FW_MSG_CODE_DRV_UNLOAD_COMMON_CHIP stages: reset COMMON, + * COMMON_CHIP, FUNCTION-only and PORT-only HW blocks. + */ +static inline void bnx2x_func_reset_cmn(struct bnx2x *bp, + const struct bnx2x_func_sp_drv_ops *drv) +{ + bnx2x_func_reset_port(bp, drv); + drv->reset_hw_cmn(bp); +} + +static inline int bnx2x_func_hw_reset(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + u32 reset_phase = params->params.hw_reset.reset_phase; + struct bnx2x_func_sp_obj *o = params->f_obj; + const struct bnx2x_func_sp_drv_ops *drv = o->drv; + + DP(BNX2X_MSG_SP, "function %d reset_phase %x\n", BP_ABS_FUNC(bp), + reset_phase); + + switch (reset_phase) { + case FW_MSG_CODE_DRV_UNLOAD_COMMON: + bnx2x_func_reset_cmn(bp, drv); + break; + case FW_MSG_CODE_DRV_UNLOAD_PORT: + bnx2x_func_reset_port(bp, drv); + break; + case FW_MSG_CODE_DRV_UNLOAD_FUNCTION: + bnx2x_func_reset_func(bp, drv); + break; + default: + BNX2X_ERR("Unknown reset_phase (0x%x) from MCP\n", + reset_phase); + break; + } + + /* Complete the command immediately: no ramrods have been sent. */ + o->complete_cmd(bp, o, BNX2X_F_CMD_HW_RESET); + + return 0; +} + +static inline int bnx2x_func_send_start(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct function_start_data *rdata = + (struct function_start_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_func_start_params *start_params = ¶ms->params.start; + + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data with provided parameters */ + rdata->function_mode = (u8)start_params->mf_mode; + rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag); + rdata->path_id = BP_PATH(bp); + rdata->network_cos_mode = start_params->network_cos_mode; + rdata->dmae_cmd_id = BNX2X_FW_DMAE_C; + + rdata->vxlan_dst_port = cpu_to_le16(start_params->vxlan_dst_port); + rdata->geneve_dst_port = cpu_to_le16(start_params->geneve_dst_port); + rdata->inner_clss_l2gre = start_params->inner_clss_l2gre; + rdata->inner_clss_l2geneve = start_params->inner_clss_l2geneve; + rdata->inner_clss_vxlan = start_params->inner_clss_vxlan; + rdata->inner_rss = start_params->inner_rss; + + rdata->sd_accept_mf_clss_fail = start_params->class_fail; + if (start_params->class_fail_ethtype) { + rdata->sd_accept_mf_clss_fail_match_ethtype = 1; + rdata->sd_accept_mf_clss_fail_ethtype = + cpu_to_le16(start_params->class_fail_ethtype); + } + + rdata->sd_vlan_force_pri_flg = start_params->sd_vlan_force_pri; + rdata->sd_vlan_force_pri_val = start_params->sd_vlan_force_pri_val; + if (start_params->sd_vlan_eth_type) + rdata->sd_vlan_eth_type = + cpu_to_le16(start_params->sd_vlan_eth_type); + else + rdata->sd_vlan_eth_type = + cpu_to_le16(0x8100); + + rdata->no_added_tags = start_params->no_added_tags; + + rdata->c2s_pri_tt_valid = start_params->c2s_pri_valid; + if (rdata->c2s_pri_tt_valid) { + memcpy(rdata->c2s_pri_trans_table.val, + start_params->c2s_pri, + MAX_VLAN_PRIORITIES); + rdata->c2s_pri_default = start_params->c2s_pri_default; + } + /* No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_START, 0, + U64_HI(data_mapping), + U64_LO(data_mapping), NONE_CONNECTION_TYPE); +} + +static inline int bnx2x_func_send_switch_update(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct function_update_data *rdata = + (struct function_update_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_func_switch_update_params *switch_update_params = + ¶ms->params.switch_update; + + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data with provided parameters */ + if (test_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, + &switch_update_params->changes)) { + rdata->tx_switch_suspend_change_flg = 1; + rdata->tx_switch_suspend = + test_bit(BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, + &switch_update_params->changes); + } + + if (test_bit(BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, + &switch_update_params->changes)) { + rdata->sd_vlan_tag_change_flg = 1; + rdata->sd_vlan_tag = + cpu_to_le16(switch_update_params->vlan); + } + + if (test_bit(BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG, + &switch_update_params->changes)) { + rdata->sd_vlan_eth_type_change_flg = 1; + rdata->sd_vlan_eth_type = + cpu_to_le16(switch_update_params->vlan_eth_type); + } + + if (test_bit(BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG, + &switch_update_params->changes)) { + rdata->sd_vlan_force_pri_change_flg = 1; + if (test_bit(BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG, + &switch_update_params->changes)) + rdata->sd_vlan_force_pri_flg = 1; + rdata->sd_vlan_force_pri_flg = + switch_update_params->vlan_force_prio; + } + + if (test_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG, + &switch_update_params->changes)) { + rdata->update_tunn_cfg_flg = 1; + if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE, + &switch_update_params->changes)) + rdata->inner_clss_l2gre = 1; + if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN, + &switch_update_params->changes)) + rdata->inner_clss_vxlan = 1; + if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE, + &switch_update_params->changes)) + rdata->inner_clss_l2geneve = 1; + if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS, + &switch_update_params->changes)) + rdata->inner_rss = 1; + rdata->vxlan_dst_port = + cpu_to_le16(switch_update_params->vxlan_dst_port); + rdata->geneve_dst_port = + cpu_to_le16(switch_update_params->geneve_dst_port); + } + + rdata->echo = SWITCH_UPDATE; + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_UPDATE, 0, + U64_HI(data_mapping), + U64_LO(data_mapping), NONE_CONNECTION_TYPE); +} + +static inline int bnx2x_func_send_afex_update(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct function_update_data *rdata = + (struct function_update_data *)o->afex_rdata; + dma_addr_t data_mapping = o->afex_rdata_mapping; + struct bnx2x_func_afex_update_params *afex_update_params = + ¶ms->params.afex_update; + + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data with provided parameters */ + rdata->vif_id_change_flg = 1; + rdata->vif_id = cpu_to_le16(afex_update_params->vif_id); + rdata->afex_default_vlan_change_flg = 1; + rdata->afex_default_vlan = + cpu_to_le16(afex_update_params->afex_default_vlan); + rdata->allowed_priorities_change_flg = 1; + rdata->allowed_priorities = afex_update_params->allowed_priorities; + rdata->echo = AFEX_UPDATE; + + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + DP(BNX2X_MSG_SP, + "afex: sending func_update vif_id 0x%x dvlan 0x%x prio 0x%x\n", + rdata->vif_id, + rdata->afex_default_vlan, rdata->allowed_priorities); + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_UPDATE, 0, + U64_HI(data_mapping), + U64_LO(data_mapping), NONE_CONNECTION_TYPE); +} + +static +inline int bnx2x_func_send_afex_viflists(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct afex_vif_list_ramrod_data *rdata = + (struct afex_vif_list_ramrod_data *)o->afex_rdata; + struct bnx2x_func_afex_viflists_params *afex_vif_params = + ¶ms->params.afex_viflists; + u64 *p_rdata = (u64 *)rdata; + + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data with provided parameters */ + rdata->vif_list_index = cpu_to_le16(afex_vif_params->vif_list_index); + rdata->func_bit_map = afex_vif_params->func_bit_map; + rdata->afex_vif_list_command = afex_vif_params->afex_vif_list_command; + rdata->func_to_clear = afex_vif_params->func_to_clear; + + /* send in echo type of sub command */ + rdata->echo = afex_vif_params->afex_vif_list_command; + + /* No need for an explicit memory barrier here as long we would + * need to ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read and we will have to put a full memory barrier there + * (inside bnx2x_sp_post()). + */ + + DP(BNX2X_MSG_SP, "afex: ramrod lists, cmd 0x%x index 0x%x func_bit_map 0x%x func_to_clr 0x%x\n", + rdata->afex_vif_list_command, rdata->vif_list_index, + rdata->func_bit_map, rdata->func_to_clear); + + /* this ramrod sends data directly and not through DMA mapping */ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_AFEX_VIF_LISTS, 0, + U64_HI(*p_rdata), U64_LO(*p_rdata), + NONE_CONNECTION_TYPE); +} + +static inline int bnx2x_func_send_stop(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_STOP, 0, 0, 0, + NONE_CONNECTION_TYPE); +} + +static inline int bnx2x_func_send_tx_stop(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STOP_TRAFFIC, 0, 0, 0, + NONE_CONNECTION_TYPE); +} +static inline int bnx2x_func_send_tx_start(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct flow_control_configuration *rdata = + (struct flow_control_configuration *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_func_tx_start_params *tx_start_params = + ¶ms->params.tx_start; + int i; + + memset(rdata, 0, sizeof(*rdata)); + + rdata->dcb_enabled = tx_start_params->dcb_enabled; + rdata->dcb_version = tx_start_params->dcb_version; + rdata->dont_add_pri_0_en = tx_start_params->dont_add_pri_0_en; + + for (i = 0; i < ARRAY_SIZE(rdata->traffic_type_to_priority_cos); i++) + rdata->traffic_type_to_priority_cos[i] = + tx_start_params->traffic_type_to_priority_cos[i]; + + for (i = 0; i < MAX_TRAFFIC_TYPES; i++) + rdata->dcb_outer_pri[i] = tx_start_params->dcb_outer_pri[i]; + /* No need for an explicit memory barrier here as long as we + * ensure the ordering of writing to the SPQ element + * and updating of the SPQ producer which involves a memory + * read. If the memory read is removed we will have to put a + * full memory barrier there (inside bnx2x_sp_post()). + */ + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_START_TRAFFIC, 0, + U64_HI(data_mapping), + U64_LO(data_mapping), NONE_CONNECTION_TYPE); +} + +static inline +int bnx2x_func_send_set_timesync(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + struct set_timesync_ramrod_data *rdata = + (struct set_timesync_ramrod_data *)o->rdata; + dma_addr_t data_mapping = o->rdata_mapping; + struct bnx2x_func_set_timesync_params *set_timesync_params = + ¶ms->params.set_timesync; + + memset(rdata, 0, sizeof(*rdata)); + + /* Fill the ramrod data with provided parameters */ + rdata->drift_adjust_cmd = set_timesync_params->drift_adjust_cmd; + rdata->offset_cmd = set_timesync_params->offset_cmd; + rdata->add_sub_drift_adjust_value = + set_timesync_params->add_sub_drift_adjust_value; + rdata->drift_adjust_value = set_timesync_params->drift_adjust_value; + rdata->drift_adjust_period = set_timesync_params->drift_adjust_period; + rdata->offset_delta.lo = + cpu_to_le32(U64_LO(set_timesync_params->offset_delta)); + rdata->offset_delta.hi = + cpu_to_le32(U64_HI(set_timesync_params->offset_delta)); + + DP(BNX2X_MSG_SP, "Set timesync command params: drift_cmd = %d, offset_cmd = %d, add_sub_drift = %d, drift_val = %d, drift_period = %d, offset_lo = %d, offset_hi = %d\n", + rdata->drift_adjust_cmd, rdata->offset_cmd, + rdata->add_sub_drift_adjust_value, rdata->drift_adjust_value, + rdata->drift_adjust_period, rdata->offset_delta.lo, + rdata->offset_delta.hi); + + return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_SET_TIMESYNC, 0, + U64_HI(data_mapping), + U64_LO(data_mapping), NONE_CONNECTION_TYPE); +} + +static int bnx2x_func_send_cmd(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + switch (params->cmd) { + case BNX2X_F_CMD_HW_INIT: + return bnx2x_func_hw_init(bp, params); + case BNX2X_F_CMD_START: + return bnx2x_func_send_start(bp, params); + case BNX2X_F_CMD_STOP: + return bnx2x_func_send_stop(bp, params); + case BNX2X_F_CMD_HW_RESET: + return bnx2x_func_hw_reset(bp, params); + case BNX2X_F_CMD_AFEX_UPDATE: + return bnx2x_func_send_afex_update(bp, params); + case BNX2X_F_CMD_AFEX_VIFLISTS: + return bnx2x_func_send_afex_viflists(bp, params); + case BNX2X_F_CMD_TX_STOP: + return bnx2x_func_send_tx_stop(bp, params); + case BNX2X_F_CMD_TX_START: + return bnx2x_func_send_tx_start(bp, params); + case BNX2X_F_CMD_SWITCH_UPDATE: + return bnx2x_func_send_switch_update(bp, params); + case BNX2X_F_CMD_SET_TIMESYNC: + return bnx2x_func_send_set_timesync(bp, params); + default: + BNX2X_ERR("Unknown command: %d\n", params->cmd); + return -EINVAL; + } +} + +void bnx2x_init_func_obj(struct bnx2x *bp, + struct bnx2x_func_sp_obj *obj, + void *rdata, dma_addr_t rdata_mapping, + void *afex_rdata, dma_addr_t afex_rdata_mapping, + struct bnx2x_func_sp_drv_ops *drv_iface) +{ + memset(obj, 0, sizeof(*obj)); + + mutex_init(&obj->one_pending_mutex); + + obj->rdata = rdata; + obj->rdata_mapping = rdata_mapping; + obj->afex_rdata = afex_rdata; + obj->afex_rdata_mapping = afex_rdata_mapping; + obj->send_cmd = bnx2x_func_send_cmd; + obj->check_transition = bnx2x_func_chk_transition; + obj->complete_cmd = bnx2x_func_comp_cmd; + obj->wait_comp = bnx2x_func_wait_comp; + + obj->drv = drv_iface; +} + +/** + * bnx2x_func_state_change - perform Function state change transition + * + * @bp: device handle + * @params: parameters to perform the transaction + * + * returns 0 in case of successfully completed transition, + * negative error code in case of failure, positive + * (EBUSY) value if there is a completion to that is + * still pending (possible only if RAMROD_COMP_WAIT is + * not set in params->ramrod_flags for asynchronous + * commands). + */ +int bnx2x_func_state_change(struct bnx2x *bp, + struct bnx2x_func_state_params *params) +{ + struct bnx2x_func_sp_obj *o = params->f_obj; + int rc, cnt = 300; + enum bnx2x_func_cmd cmd = params->cmd; + unsigned long *pending = &o->pending; + + mutex_lock(&o->one_pending_mutex); + + /* Check that the requested transition is legal */ + rc = o->check_transition(bp, o, params); + if ((rc == -EBUSY) && + (test_bit(RAMROD_RETRY, ¶ms->ramrod_flags))) { + while ((rc == -EBUSY) && (--cnt > 0)) { + mutex_unlock(&o->one_pending_mutex); + msleep(10); + mutex_lock(&o->one_pending_mutex); + rc = o->check_transition(bp, o, params); + } + if (rc == -EBUSY) { + mutex_unlock(&o->one_pending_mutex); + BNX2X_ERR("timeout waiting for previous ramrod completion\n"); + return rc; + } + } else if (rc) { + mutex_unlock(&o->one_pending_mutex); + return rc; + } + + /* Set "pending" bit */ + set_bit(cmd, pending); + + /* Don't send a command if only driver cleanup was requested */ + if (test_bit(RAMROD_DRV_CLR_ONLY, ¶ms->ramrod_flags)) { + bnx2x_func_state_change_comp(bp, o, cmd); + mutex_unlock(&o->one_pending_mutex); + } else { + /* Send a ramrod */ + rc = o->send_cmd(bp, params); + + mutex_unlock(&o->one_pending_mutex); + + if (rc) { + o->next_state = BNX2X_F_STATE_MAX; + clear_bit(cmd, pending); + smp_mb__after_atomic(); + return rc; + } + + if (test_bit(RAMROD_COMP_WAIT, ¶ms->ramrod_flags)) { + rc = o->wait_comp(bp, o, cmd); + if (rc) + return rc; + + return 0; + } + } + + return !!test_bit(cmd, pending); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h new file mode 100644 index 000000000..7a6e82db4 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -0,0 +1,1543 @@ +/* bnx2x_sp.h: Qlogic Everest network driver. + * + * Copyright 2011-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * Unless you and Qlogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Qlogic software provided under a + * license other than the GPL, without Qlogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Vladislav Zolotarov + * + */ +#ifndef BNX2X_SP_VERBS +#define BNX2X_SP_VERBS + +struct bnx2x; +struct eth_context; + +/* Bits representing general command's configuration */ +enum { + RAMROD_TX, + RAMROD_RX, + /* Wait until all pending commands complete */ + RAMROD_COMP_WAIT, + /* Don't send a ramrod, only update a registry */ + RAMROD_DRV_CLR_ONLY, + /* Configure HW according to the current object state */ + RAMROD_RESTORE, + /* Execute the next command now */ + RAMROD_EXEC, + /* Don't add a new command and continue execution of postponed + * commands. If not set a new command will be added to the + * pending commands list. + */ + RAMROD_CONT, + /* If there is another pending ramrod, wait until it finishes and + * re-try to submit this one. This flag can be set only in sleepable + * context, and should not be set from the context that completes the + * ramrods as deadlock will occur. + */ + RAMROD_RETRY, +}; + +typedef enum { + BNX2X_OBJ_TYPE_RX, + BNX2X_OBJ_TYPE_TX, + BNX2X_OBJ_TYPE_RX_TX, +} bnx2x_obj_type; + +/* Public slow path states */ +enum { + BNX2X_FILTER_MAC_PENDING, + BNX2X_FILTER_VLAN_PENDING, + BNX2X_FILTER_VLAN_MAC_PENDING, + BNX2X_FILTER_RX_MODE_PENDING, + BNX2X_FILTER_RX_MODE_SCHED, + BNX2X_FILTER_ISCSI_ETH_START_SCHED, + BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, + BNX2X_FILTER_FCOE_ETH_START_SCHED, + BNX2X_FILTER_FCOE_ETH_STOP_SCHED, + BNX2X_FILTER_MCAST_PENDING, + BNX2X_FILTER_MCAST_SCHED, + BNX2X_FILTER_RSS_CONF_PENDING, + BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, + BNX2X_AFEX_PENDING_VIFSET_MCP_ACK +}; + +struct bnx2x_raw_obj { + u8 func_id; + + /* Queue params */ + u8 cl_id; + u32 cid; + + /* Ramrod data buffer params */ + void *rdata; + dma_addr_t rdata_mapping; + + /* Ramrod state params */ + int state; /* "ramrod is pending" state bit */ + unsigned long *pstate; /* pointer to state buffer */ + + bnx2x_obj_type obj_type; + + int (*wait_comp)(struct bnx2x *bp, + struct bnx2x_raw_obj *o); + + bool (*check_pending)(struct bnx2x_raw_obj *o); + void (*clear_pending)(struct bnx2x_raw_obj *o); + void (*set_pending)(struct bnx2x_raw_obj *o); +}; + +/************************* VLAN-MAC commands related parameters ***************/ +struct bnx2x_mac_ramrod_data { + u8 mac[ETH_ALEN]; + u8 is_inner_mac; +}; + +struct bnx2x_vlan_ramrod_data { + u16 vlan; +}; + +struct bnx2x_vlan_mac_ramrod_data { + u8 mac[ETH_ALEN]; + u8 is_inner_mac; + u16 vlan; +}; + +union bnx2x_classification_ramrod_data { + struct bnx2x_mac_ramrod_data mac; + struct bnx2x_vlan_ramrod_data vlan; + struct bnx2x_vlan_mac_ramrod_data vlan_mac; +}; + +/* VLAN_MAC commands */ +enum bnx2x_vlan_mac_cmd { + BNX2X_VLAN_MAC_ADD, + BNX2X_VLAN_MAC_DEL, + BNX2X_VLAN_MAC_MOVE, +}; + +struct bnx2x_vlan_mac_data { + /* Requested command: BNX2X_VLAN_MAC_XX */ + enum bnx2x_vlan_mac_cmd cmd; + /* used to contain the data related vlan_mac_flags bits from + * ramrod parameters. + */ + unsigned long vlan_mac_flags; + + /* Needed for MOVE command */ + struct bnx2x_vlan_mac_obj *target_obj; + + union bnx2x_classification_ramrod_data u; +}; + +/*************************** Exe Queue obj ************************************/ +union bnx2x_exe_queue_cmd_data { + struct bnx2x_vlan_mac_data vlan_mac; + + struct { + /* TODO */ + } mcast; +}; + +struct bnx2x_exeq_elem { + struct list_head link; + + /* Length of this element in the exe_chunk. */ + int cmd_len; + + union bnx2x_exe_queue_cmd_data cmd_data; +}; + +union bnx2x_qable_obj; + +union bnx2x_exeq_comp_elem { + union event_ring_elem *elem; +}; + +struct bnx2x_exe_queue_obj; + +typedef int (*exe_q_validate)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct bnx2x_exeq_elem *elem); + +typedef int (*exe_q_remove)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct bnx2x_exeq_elem *elem); + +/* Return positive if entry was optimized, 0 - if not, negative + * in case of an error. + */ +typedef int (*exe_q_optimize)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct bnx2x_exeq_elem *elem); +typedef int (*exe_q_execute)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct list_head *exe_chunk, + unsigned long *ramrod_flags); +typedef struct bnx2x_exeq_elem * + (*exe_q_get)(struct bnx2x_exe_queue_obj *o, + struct bnx2x_exeq_elem *elem); + +struct bnx2x_exe_queue_obj { + /* Commands pending for an execution. */ + struct list_head exe_queue; + + /* Commands pending for an completion. */ + struct list_head pending_comp; + + spinlock_t lock; + + /* Maximum length of commands' list for one execution */ + int exe_chunk_len; + + union bnx2x_qable_obj *owner; + + /****** Virtual functions ******/ + /** + * Called before commands execution for commands that are really + * going to be executed (after 'optimize'). + * + * Must run under exe_queue->lock + */ + exe_q_validate validate; + + /** + * Called before removing pending commands, cleaning allocated + * resources (e.g., credits from validate) + */ + exe_q_remove remove; + + /** + * This will try to cancel the current pending commands list + * considering the new command. + * + * Returns the number of optimized commands or a negative error code + * + * Must run under exe_queue->lock + */ + exe_q_optimize optimize; + + /** + * Run the next commands chunk (owner specific). + */ + exe_q_execute execute; + + /** + * Return the exe_queue element containing the specific command + * if any. Otherwise return NULL. + */ + exe_q_get get; +}; +/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/ +/* + * Element in the VLAN_MAC registry list having all currently configured + * rules. + */ +struct bnx2x_vlan_mac_registry_elem { + struct list_head link; + + /* Used to store the cam offset used for the mac/vlan/vlan-mac. + * Relevant for 57710 and 57711 only. VLANs and MACs share the + * same CAM for these chips. + */ + int cam_offset; + + /* Needed for DEL and RESTORE flows */ + unsigned long vlan_mac_flags; + + union bnx2x_classification_ramrod_data u; +}; + +/* Bits representing VLAN_MAC commands specific flags */ +enum { + BNX2X_UC_LIST_MAC, + BNX2X_ETH_MAC, + BNX2X_ISCSI_ETH_MAC, + BNX2X_NETQ_ETH_MAC, + BNX2X_VLAN, + BNX2X_DONT_CONSUME_CAM_CREDIT, + BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, +}; +/* When looking for matching filters, some flags are not interesting */ +#define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \ + 1 << BNX2X_ETH_MAC | \ + 1 << BNX2X_ISCSI_ETH_MAC | \ + 1 << BNX2X_NETQ_ETH_MAC | \ + 1 << BNX2X_VLAN) +#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \ + ((flags) & BNX2X_VLAN_MAC_CMP_MASK) + +struct bnx2x_vlan_mac_ramrod_params { + /* Object to run the command from */ + struct bnx2x_vlan_mac_obj *vlan_mac_obj; + + /* General command flags: COMP_WAIT, etc. */ + unsigned long ramrod_flags; + + /* Command specific configuration request */ + struct bnx2x_vlan_mac_data user_req; +}; + +struct bnx2x_vlan_mac_obj { + struct bnx2x_raw_obj raw; + + /* Bookkeeping list: will prevent the addition of already existing + * entries. + */ + struct list_head head; + /* Implement a simple reader/writer lock on the head list. + * all these fields should only be accessed under the exe_queue lock + */ + u8 head_reader; /* Num. of readers accessing head list */ + bool head_exe_request; /* Pending execution request. */ + unsigned long saved_ramrod_flags; /* Ramrods of pending execution */ + + /* TODO: Add it's initialization in the init functions */ + struct bnx2x_exe_queue_obj exe_queue; + + /* MACs credit pool */ + struct bnx2x_credit_pool_obj *macs_pool; + + /* VLANs credit pool */ + struct bnx2x_credit_pool_obj *vlans_pool; + + /* RAMROD command to be used */ + int ramrod_cmd; + + /* copy first n elements onto preallocated buffer + * + * @param n number of elements to get + * @param buf buffer preallocated by caller into which elements + * will be copied. Note elements are 4-byte aligned + * so buffer size must be able to accommodate the + * aligned elements. + * + * @return number of copied bytes + */ + int (*get_n_elements)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, int n, u8 *base, + u8 stride, u8 size); + + /** + * Checks if ADD-ramrod with the given params may be performed. + * + * @return zero if the element may be added + */ + + int (*check_add)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data); + + /** + * Checks if DEL-ramrod with the given params may be performed. + * + * @return true if the element may be deleted + */ + struct bnx2x_vlan_mac_registry_elem * + (*check_del)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data); + + /** + * Checks if DEL-ramrod with the given params may be performed. + * + * @return true if the element may be deleted + */ + bool (*check_move)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *src_o, + struct bnx2x_vlan_mac_obj *dst_o, + union bnx2x_classification_ramrod_data *data); + + /** + * Update the relevant credit object(s) (consume/return + * correspondingly). + */ + bool (*get_credit)(struct bnx2x_vlan_mac_obj *o); + bool (*put_credit)(struct bnx2x_vlan_mac_obj *o); + bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset); + bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset); + + /** + * Configures one rule in the ramrod data buffer. + */ + void (*set_one_rule)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, int rule_idx, + int cam_offset); + + /** + * Delete all configured elements having the given + * vlan_mac_flags specification. Assumes no pending for + * execution commands. Will schedule all all currently + * configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags + * specification for deletion and will use the given + * ramrod_flags for the last DEL operation. + * + * @param bp + * @param o + * @param ramrod_flags RAMROD_XX flags + * + * @return 0 if the last operation has completed successfully + * and there are no more elements left, positive value + * if there are pending for completion commands, + * negative value in case of failure. + */ + int (*delete_all)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + unsigned long *vlan_mac_flags, + unsigned long *ramrod_flags); + + /** + * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously + * configured elements list. + * + * @param bp + * @param p Command parameters (RAMROD_COMP_WAIT bit in + * ramrod_flags is only taken into an account) + * @param ppos a pointer to the cookie that should be given back in the + * next call to make function handle the next element. If + * *ppos is set to NULL it will restart the iterator. + * If returned *ppos == NULL this means that the last + * element has been handled. + * + * @return int + */ + int (*restore)(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p, + struct bnx2x_vlan_mac_registry_elem **ppos); + + /** + * Should be called on a completion arrival. + * + * @param bp + * @param o + * @param cqe Completion element we are handling + * @param ramrod_flags if RAMROD_CONT is set the next bulk of + * pending commands will be executed. + * RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE + * may also be set if needed. + * + * @return 0 if there are neither pending nor waiting for + * completion commands. Positive value if there are + * pending for execution or for completion commands. + * Negative value in case of an error (including an + * error in the cqe). + */ + int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, + union event_ring_elem *cqe, + unsigned long *ramrod_flags); + + /** + * Wait for completion of all commands. Don't schedule new ones, + * just wait. It assumes that the completion code will schedule + * for new commands. + */ + int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o); +}; + +enum { + BNX2X_LLH_CAM_ISCSI_ETH_LINE = 0, + BNX2X_LLH_CAM_ETH_LINE, + BNX2X_LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE / 2 +}; + +/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */ + +/* RX_MODE ramrod special flags: set in rx_mode_flags field in + * a bnx2x_rx_mode_ramrod_params. + */ +enum { + BNX2X_RX_MODE_FCOE_ETH, + BNX2X_RX_MODE_ISCSI_ETH, +}; + +enum { + BNX2X_ACCEPT_UNICAST, + BNX2X_ACCEPT_MULTICAST, + BNX2X_ACCEPT_ALL_UNICAST, + BNX2X_ACCEPT_ALL_MULTICAST, + BNX2X_ACCEPT_BROADCAST, + BNX2X_ACCEPT_UNMATCHED, + BNX2X_ACCEPT_ANY_VLAN +}; + +struct bnx2x_rx_mode_ramrod_params { + struct bnx2x_rx_mode_obj *rx_mode_obj; + unsigned long *pstate; + int state; + u8 cl_id; + u32 cid; + u8 func_id; + unsigned long ramrod_flags; + unsigned long rx_mode_flags; + + /* rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to + * a tstorm_eth_mac_filter_config (e1x). + */ + void *rdata; + dma_addr_t rdata_mapping; + + /* Rx mode settings */ + unsigned long rx_accept_flags; + + /* internal switching settings */ + unsigned long tx_accept_flags; +}; + +struct bnx2x_rx_mode_obj { + int (*config_rx_mode)(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p); + + int (*wait_comp)(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p); +}; + +/********************** Set multicast group ***********************************/ + +struct bnx2x_mcast_list_elem { + struct list_head link; + u8 *mac; +}; + +union bnx2x_mcast_config_data { + u8 *mac; + u8 bin; /* used in a RESTORE flow */ +}; + +struct bnx2x_mcast_ramrod_params { + struct bnx2x_mcast_obj *mcast_obj; + + /* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */ + unsigned long ramrod_flags; + + struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */ + /** TODO: + * - rename it to macs_num. + * - Add a new command type for handling pending commands + * (remove "zero semantics"). + * + * Length of mcast_list. If zero and ADD_CONT command - post + * pending commands. + */ + int mcast_list_len; +}; + +enum bnx2x_mcast_cmd { + BNX2X_MCAST_CMD_ADD, + BNX2X_MCAST_CMD_CONT, + BNX2X_MCAST_CMD_DEL, + BNX2X_MCAST_CMD_RESTORE, + + /* Following this, multicast configuration should equal to approx + * the set of MACs provided [i.e., remove all else]. + * The two sub-commands are used internally to decide whether a given + * bin is to be added or removed + */ + BNX2X_MCAST_CMD_SET, + BNX2X_MCAST_CMD_SET_ADD, + BNX2X_MCAST_CMD_SET_DEL, +}; + +struct bnx2x_mcast_obj { + struct bnx2x_raw_obj raw; + + union { + struct { + #define BNX2X_MCAST_BINS_NUM 256 + #define BNX2X_MCAST_VEC_SZ (BNX2X_MCAST_BINS_NUM / 64) + u64 vec[BNX2X_MCAST_VEC_SZ]; + + /** Number of BINs to clear. Should be updated + * immediately when a command arrives in order to + * properly create DEL commands. + */ + int num_bins_set; + } aprox_match; + + struct { + struct list_head macs; + int num_macs_set; + } exact_match; + } registry; + + /* Pending commands */ + struct list_head pending_cmds_head; + + /* A state that is set in raw.pstate, when there are pending commands */ + int sched_state; + + /* Maximal number of mcast MACs configured in one command */ + int max_cmd_len; + + /* Total number of currently pending MACs to configure: both + * in the pending commands list and in the current command. + */ + int total_pending_num; + + u8 engine_id; + + /** + * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above) + */ + int (*config_mcast)(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); + + /** + * Fills the ramrod data during the RESTORE flow. + * + * @param bp + * @param o + * @param start_idx Registry index to start from + * @param rdata_idx Index in the ramrod data to start from + * + * @return -1 if we handled the whole registry or index of the last + * handled registry element. + */ + int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, + int start_bin, int *rdata_idx); + + int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); + + void (*set_one_rule)(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, int idx, + union bnx2x_mcast_config_data *cfg_data, + enum bnx2x_mcast_cmd cmd); + + /** Checks if there are more mcast MACs to be set or a previous + * command is still pending. + */ + bool (*check_pending)(struct bnx2x_mcast_obj *o); + + /** + * Set/Clear/Check SCHEDULED state of the object + */ + void (*set_sched)(struct bnx2x_mcast_obj *o); + void (*clear_sched)(struct bnx2x_mcast_obj *o); + bool (*check_sched)(struct bnx2x_mcast_obj *o); + + /* Wait until all pending commands complete */ + int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o); + + /** + * Handle the internal object counters needed for proper + * commands handling. Checks that the provided parameters are + * feasible. + */ + int (*validate)(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); + + /** + * Restore the values of internal counters in case of a failure. + */ + void (*revert)(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + int old_num_bins, + enum bnx2x_mcast_cmd cmd); + + int (*get_registry_size)(struct bnx2x_mcast_obj *o); + void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n); +}; + +/*************************** Credit handling **********************************/ +struct bnx2x_credit_pool_obj { + + /* Current amount of credit in the pool */ + atomic_t credit; + + /* Maximum allowed credit. put() will check against it. */ + int pool_sz; + + /* Allocate a pool table statically. + * + * Currently the maximum allowed size is MAX_MAC_CREDIT_E2(272) + * + * The set bit in the table will mean that the entry is available. + */ +#define BNX2X_POOL_VEC_SIZE (MAX_MAC_CREDIT_E2 / 64) + u64 pool_mirror[BNX2X_POOL_VEC_SIZE]; + + /* Base pool offset (initialized differently */ + int base_pool_offset; + + /** + * Get the next free pool entry. + * + * @return true if there was a free entry in the pool + */ + bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry); + + /** + * Return the entry back to the pool. + * + * @return true if entry is legal and has been successfully + * returned to the pool. + */ + bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry); + + /** + * Get the requested amount of credit from the pool. + * + * @param cnt Amount of requested credit + * @return true if the operation is successful + */ + bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt); + + /** + * Returns the credit to the pool. + * + * @param cnt Amount of credit to return + * @return true if the operation is successful + */ + bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt); + + /** + * Reads the current amount of credit. + */ + int (*check)(struct bnx2x_credit_pool_obj *o); +}; + +/*************************** RSS configuration ********************************/ +enum { + /* RSS_MODE bits are mutually exclusive */ + BNX2X_RSS_MODE_DISABLED, + BNX2X_RSS_MODE_REGULAR, + + BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */ + + BNX2X_RSS_IPV4, + BNX2X_RSS_IPV4_TCP, + BNX2X_RSS_IPV4_UDP, + BNX2X_RSS_IPV6, + BNX2X_RSS_IPV6_TCP, + BNX2X_RSS_IPV6_UDP, + + BNX2X_RSS_IPV4_VXLAN, + BNX2X_RSS_IPV6_VXLAN, + BNX2X_RSS_TUNN_INNER_HDRS, +}; + +struct bnx2x_config_rss_params { + struct bnx2x_rss_config_obj *rss_obj; + + /* may have RAMROD_COMP_WAIT set only */ + unsigned long ramrod_flags; + + /* BNX2X_RSS_X bits */ + unsigned long rss_flags; + + /* Number hash bits to take into an account */ + u8 rss_result_mask; + + /* Indirection table */ + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; + + /* RSS hash values */ + u32 rss_key[10]; + + /* valid only iff BNX2X_RSS_UPDATE_TOE is set */ + u16 toe_rss_bitmap; +}; + +struct bnx2x_rss_config_obj { + struct bnx2x_raw_obj raw; + + /* RSS engine to use */ + u8 engine_id; + + /* Last configured indirection table */ + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; + + /* flags for enabling 4-tupple hash on UDP */ + u8 udp_rss_v4; + u8 udp_rss_v6; + + int (*config_rss)(struct bnx2x *bp, + struct bnx2x_config_rss_params *p); +}; + +/*********************** Queue state update ***********************************/ + +/* UPDATE command options */ +enum { + BNX2X_Q_UPDATE_IN_VLAN_REM, + BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG, + BNX2X_Q_UPDATE_OUT_VLAN_REM, + BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG, + BNX2X_Q_UPDATE_ANTI_SPOOF, + BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG, + BNX2X_Q_UPDATE_ACTIVATE, + BNX2X_Q_UPDATE_ACTIVATE_CHNG, + BNX2X_Q_UPDATE_DEF_VLAN_EN, + BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, + BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + BNX2X_Q_UPDATE_SILENT_VLAN_REM, + BNX2X_Q_UPDATE_TX_SWITCHING_CHNG, + BNX2X_Q_UPDATE_TX_SWITCHING, + BNX2X_Q_UPDATE_PTP_PKTS_CHNG, + BNX2X_Q_UPDATE_PTP_PKTS, +}; + +/* Allowed Queue states */ +enum bnx2x_q_state { + BNX2X_Q_STATE_RESET, + BNX2X_Q_STATE_INITIALIZED, + BNX2X_Q_STATE_ACTIVE, + BNX2X_Q_STATE_MULTI_COS, + BNX2X_Q_STATE_MCOS_TERMINATED, + BNX2X_Q_STATE_INACTIVE, + BNX2X_Q_STATE_STOPPED, + BNX2X_Q_STATE_TERMINATED, + BNX2X_Q_STATE_FLRED, + BNX2X_Q_STATE_MAX, +}; + +/* Allowed Queue states */ +enum bnx2x_q_logical_state { + BNX2X_Q_LOGICAL_STATE_ACTIVE, + BNX2X_Q_LOGICAL_STATE_STOPPED, +}; + +/* Allowed commands */ +enum bnx2x_queue_cmd { + BNX2X_Q_CMD_INIT, + BNX2X_Q_CMD_SETUP, + BNX2X_Q_CMD_SETUP_TX_ONLY, + BNX2X_Q_CMD_DEACTIVATE, + BNX2X_Q_CMD_ACTIVATE, + BNX2X_Q_CMD_UPDATE, + BNX2X_Q_CMD_UPDATE_TPA, + BNX2X_Q_CMD_HALT, + BNX2X_Q_CMD_CFC_DEL, + BNX2X_Q_CMD_TERMINATE, + BNX2X_Q_CMD_EMPTY, + BNX2X_Q_CMD_MAX, +}; + +/* queue SETUP + INIT flags */ +enum { + BNX2X_Q_FLG_TPA, + BNX2X_Q_FLG_TPA_IPV6, + BNX2X_Q_FLG_TPA_GRO, + BNX2X_Q_FLG_STATS, + BNX2X_Q_FLG_ZERO_STATS, + BNX2X_Q_FLG_ACTIVE, + BNX2X_Q_FLG_OV, + BNX2X_Q_FLG_VLAN, + BNX2X_Q_FLG_COS, + BNX2X_Q_FLG_HC, + BNX2X_Q_FLG_HC_EN, + BNX2X_Q_FLG_DHC, + BNX2X_Q_FLG_FCOE, + BNX2X_Q_FLG_LEADING_RSS, + BNX2X_Q_FLG_MCAST, + BNX2X_Q_FLG_DEF_VLAN, + BNX2X_Q_FLG_TX_SWITCH, + BNX2X_Q_FLG_TX_SEC, + BNX2X_Q_FLG_ANTI_SPOOF, + BNX2X_Q_FLG_SILENT_VLAN_REM, + BNX2X_Q_FLG_FORCE_DEFAULT_PRI, + BNX2X_Q_FLG_REFUSE_OUTBAND_VLAN, + BNX2X_Q_FLG_PCSUM_ON_PKT, + BNX2X_Q_FLG_TUN_INC_INNER_IP_ID +}; + +/* Queue type options: queue type may be a combination of below. */ +enum bnx2x_q_type { + /** TODO: Consider moving both these flags into the init() + * ramrod params. + */ + BNX2X_Q_TYPE_HAS_RX, + BNX2X_Q_TYPE_HAS_TX, +}; + +#define BNX2X_PRIMARY_CID_INDEX 0 +#define BNX2X_MULTI_TX_COS_E1X 3 /* QM only */ +#define BNX2X_MULTI_TX_COS_E2_E3A0 2 +#define BNX2X_MULTI_TX_COS_E3B0 3 +#define BNX2X_MULTI_TX_COS 3 /* Maximum possible */ + +#define MAC_PAD (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN) +/* DMAE channel to be used by FW for timesync workaroun. A driver that sends + * timesync-related ramrods must not use this DMAE command ID. + */ +#define FW_DMAE_CMD_ID 6 + +struct bnx2x_queue_init_params { + struct { + unsigned long flags; + u16 hc_rate; + u8 fw_sb_id; + u8 sb_cq_index; + } tx; + + struct { + unsigned long flags; + u16 hc_rate; + u8 fw_sb_id; + u8 sb_cq_index; + } rx; + + /* CID context in the host memory */ + struct eth_context *cxts[BNX2X_MULTI_TX_COS]; + + /* maximum number of cos supported by hardware */ + u8 max_cos; +}; + +struct bnx2x_queue_terminate_params { + /* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_cfc_del_params { + /* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_update_params { + unsigned long update_flags; /* BNX2X_Q_UPDATE_XX bits */ + u16 def_vlan; + u16 silent_removal_value; + u16 silent_removal_mask; +/* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_update_tpa_params { + dma_addr_t sge_map; + u8 update_ipv4; + u8 update_ipv6; + u8 max_tpa_queues; + u8 max_sges_pkt; + u8 complete_on_both_clients; + u8 dont_verify_thr; + u8 tpa_mode; + u8 _pad; + + u16 sge_buff_sz; + u16 max_agg_sz; + + u16 sge_pause_thr_low; + u16 sge_pause_thr_high; +}; + +struct rxq_pause_params { + u16 bd_th_lo; + u16 bd_th_hi; + u16 rcq_th_lo; + u16 rcq_th_hi; + u16 sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */ + u16 sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */ + u16 pri_map; +}; + +/* general */ +struct bnx2x_general_setup_params { + /* valid iff BNX2X_Q_FLG_STATS */ + u8 stat_id; + + u8 spcl_id; + u16 mtu; + u8 cos; + + u8 fp_hsi; +}; + +struct bnx2x_rxq_setup_params { + /* dma */ + dma_addr_t dscr_map; + dma_addr_t sge_map; + dma_addr_t rcq_map; + dma_addr_t rcq_np_map; + + u16 drop_flags; + u16 buf_sz; + u8 fw_sb_id; + u8 cl_qzone_id; + + /* valid iff BNX2X_Q_FLG_TPA */ + u16 tpa_agg_sz; + u16 sge_buf_sz; + u8 max_sges_pkt; + u8 max_tpa_queues; + u8 rss_engine_id; + + /* valid iff BNX2X_Q_FLG_MCAST */ + u8 mcast_engine_id; + + u8 cache_line_log; + + u8 sb_cq_index; + + /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */ + u16 silent_removal_value; + u16 silent_removal_mask; +}; + +struct bnx2x_txq_setup_params { + /* dma */ + dma_addr_t dscr_map; + + u8 fw_sb_id; + u8 sb_cq_index; + u8 cos; /* valid iff BNX2X_Q_FLG_COS */ + u16 traffic_type; + /* equals to the leading rss client id, used for TX classification*/ + u8 tss_leading_cl_id; + + /* valid iff BNX2X_Q_FLG_DEF_VLAN */ + u16 default_vlan; +}; + +struct bnx2x_queue_setup_params { + struct bnx2x_general_setup_params gen_params; + struct bnx2x_txq_setup_params txq_params; + struct bnx2x_rxq_setup_params rxq_params; + struct rxq_pause_params pause_params; + unsigned long flags; +}; + +struct bnx2x_queue_setup_tx_only_params { + struct bnx2x_general_setup_params gen_params; + struct bnx2x_txq_setup_params txq_params; + unsigned long flags; + /* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_state_params { + struct bnx2x_queue_sp_obj *q_obj; + + /* Current command */ + enum bnx2x_queue_cmd cmd; + + /* may have RAMROD_COMP_WAIT set only */ + unsigned long ramrod_flags; + + /* Params according to the current command */ + union { + struct bnx2x_queue_update_params update; + struct bnx2x_queue_update_tpa_params update_tpa; + struct bnx2x_queue_setup_params setup; + struct bnx2x_queue_init_params init; + struct bnx2x_queue_setup_tx_only_params tx_only; + struct bnx2x_queue_terminate_params terminate; + struct bnx2x_queue_cfc_del_params cfc_del; + } params; +}; + +struct bnx2x_viflist_params { + u8 echo_res; + u8 func_bit_map_res; +}; + +struct bnx2x_queue_sp_obj { + u32 cids[BNX2X_MULTI_TX_COS]; + u8 cl_id; + u8 func_id; + + /* number of traffic classes supported by queue. + * The primary connection of the queue supports the first traffic + * class. Any further traffic class is supported by a tx-only + * connection. + * + * Therefore max_cos is also a number of valid entries in the cids + * array. + */ + u8 max_cos; + u8 num_tx_only, next_tx_only; + + enum bnx2x_q_state state, next_state; + + /* bits from enum bnx2x_q_type */ + unsigned long type; + + /* BNX2X_Q_CMD_XX bits. This object implements "one + * pending" paradigm but for debug and tracing purposes it's + * more convenient to have different bits for different + * commands. + */ + unsigned long pending; + + /* Buffer to use as a ramrod data and its mapping */ + void *rdata; + dma_addr_t rdata_mapping; + + /** + * Performs one state change according to the given parameters. + * + * @return 0 in case of success and negative value otherwise. + */ + int (*send_cmd)(struct bnx2x *bp, + struct bnx2x_queue_state_params *params); + + /** + * Sets the pending bit according to the requested transition. + */ + int (*set_pending)(struct bnx2x_queue_sp_obj *o, + struct bnx2x_queue_state_params *params); + + /** + * Checks that the requested state transition is legal. + */ + int (*check_transition)(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + struct bnx2x_queue_state_params *params); + + /** + * Completes the pending command. + */ + int (*complete_cmd)(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + enum bnx2x_queue_cmd); + + int (*wait_comp)(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + enum bnx2x_queue_cmd cmd); +}; + +/********************** Function state update *********************************/ + +/* UPDATE command options */ +enum { + BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, + BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, + BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, + BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG, + BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG, + BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG, + BNX2X_F_UPDATE_TUNNEL_CFG_CHNG, + BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE, + BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN, + BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE, + BNX2X_F_UPDATE_TUNNEL_INNER_RSS, +}; + +/* Allowed Function states */ +enum bnx2x_func_state { + BNX2X_F_STATE_RESET, + BNX2X_F_STATE_INITIALIZED, + BNX2X_F_STATE_STARTED, + BNX2X_F_STATE_TX_STOPPED, + BNX2X_F_STATE_MAX, +}; + +/* Allowed Function commands */ +enum bnx2x_func_cmd { + BNX2X_F_CMD_HW_INIT, + BNX2X_F_CMD_START, + BNX2X_F_CMD_STOP, + BNX2X_F_CMD_HW_RESET, + BNX2X_F_CMD_AFEX_UPDATE, + BNX2X_F_CMD_AFEX_VIFLISTS, + BNX2X_F_CMD_TX_STOP, + BNX2X_F_CMD_TX_START, + BNX2X_F_CMD_SWITCH_UPDATE, + BNX2X_F_CMD_SET_TIMESYNC, + BNX2X_F_CMD_MAX, +}; + +struct bnx2x_func_hw_init_params { + /* A load phase returned by MCP. + * + * May be: + * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP + * FW_MSG_CODE_DRV_LOAD_COMMON + * FW_MSG_CODE_DRV_LOAD_PORT + * FW_MSG_CODE_DRV_LOAD_FUNCTION + */ + u32 load_phase; +}; + +struct bnx2x_func_hw_reset_params { + /* A load phase returned by MCP. + * + * May be: + * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP + * FW_MSG_CODE_DRV_LOAD_COMMON + * FW_MSG_CODE_DRV_LOAD_PORT + * FW_MSG_CODE_DRV_LOAD_FUNCTION + */ + u32 reset_phase; +}; + +struct bnx2x_func_start_params { + /* Multi Function mode: + * - Single Function + * - Switch Dependent + * - Switch Independent + */ + u16 mf_mode; + + /* Switch Dependent mode outer VLAN tag */ + u16 sd_vlan_tag; + + /* Function cos mode */ + u8 network_cos_mode; + + /* UDP dest port for VXLAN */ + u16 vxlan_dst_port; + + /* UDP dest port for Geneve */ + u16 geneve_dst_port; + + /* Enable inner Rx classifications for L2GRE packets */ + u8 inner_clss_l2gre; + + /* Enable inner Rx classifications for L2-Geneve packets */ + u8 inner_clss_l2geneve; + + /* Enable inner Rx classification for vxlan packets */ + u8 inner_clss_vxlan; + + /* Enable RSS according to inner header */ + u8 inner_rss; + + /* Allows accepting of packets failing MF classification, possibly + * only matching a given ethertype + */ + u8 class_fail; + u16 class_fail_ethtype; + + /* Override priority of output packets */ + u8 sd_vlan_force_pri; + u8 sd_vlan_force_pri_val; + + /* Replace vlan's ethertype */ + u16 sd_vlan_eth_type; + + /* Prevent inner vlans from being added by FW */ + u8 no_added_tags; + + /* Inner-to-Outer vlan priority mapping */ + u8 c2s_pri[MAX_VLAN_PRIORITIES]; + u8 c2s_pri_default; + u8 c2s_pri_valid; +}; + +struct bnx2x_func_switch_update_params { + unsigned long changes; /* BNX2X_F_UPDATE_XX bits */ + u16 vlan; + u16 vlan_eth_type; + u8 vlan_force_prio; + u16 vxlan_dst_port; + u16 geneve_dst_port; +}; + +struct bnx2x_func_afex_update_params { + u16 vif_id; + u16 afex_default_vlan; + u8 allowed_priorities; +}; + +struct bnx2x_func_afex_viflists_params { + u16 vif_list_index; + u8 func_bit_map; + u8 afex_vif_list_command; + u8 func_to_clear; +}; + +struct bnx2x_func_tx_start_params { + struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES]; + u8 dcb_enabled; + u8 dcb_version; + u8 dont_add_pri_0_en; + u8 dcb_outer_pri[MAX_TRAFFIC_TYPES]; +}; + +struct bnx2x_func_set_timesync_params { + /* Reset, set or keep the current drift value */ + u8 drift_adjust_cmd; + + /* Dec, inc or keep the current offset */ + u8 offset_cmd; + + /* Drift value direction */ + u8 add_sub_drift_adjust_value; + + /* Drift, period and offset values to be used according to the commands + * above. + */ + u8 drift_adjust_value; + u32 drift_adjust_period; + u64 offset_delta; +}; + +struct bnx2x_func_state_params { + struct bnx2x_func_sp_obj *f_obj; + + /* Current command */ + enum bnx2x_func_cmd cmd; + + /* may have RAMROD_COMP_WAIT set only */ + unsigned long ramrod_flags; + + /* Params according to the current command */ + union { + struct bnx2x_func_hw_init_params hw_init; + struct bnx2x_func_hw_reset_params hw_reset; + struct bnx2x_func_start_params start; + struct bnx2x_func_switch_update_params switch_update; + struct bnx2x_func_afex_update_params afex_update; + struct bnx2x_func_afex_viflists_params afex_viflists; + struct bnx2x_func_tx_start_params tx_start; + struct bnx2x_func_set_timesync_params set_timesync; + } params; +}; + +struct bnx2x_func_sp_drv_ops { + /* Init tool + runtime initialization: + * - Common Chip + * - Common (per Path) + * - Port + * - Function phases + */ + int (*init_hw_cmn_chip)(struct bnx2x *bp); + int (*init_hw_cmn)(struct bnx2x *bp); + int (*init_hw_port)(struct bnx2x *bp); + int (*init_hw_func)(struct bnx2x *bp); + + /* Reset Function HW: Common, Port, Function phases. */ + void (*reset_hw_cmn)(struct bnx2x *bp); + void (*reset_hw_port)(struct bnx2x *bp); + void (*reset_hw_func)(struct bnx2x *bp); + + /* Init/Free GUNZIP resources */ + int (*gunzip_init)(struct bnx2x *bp); + void (*gunzip_end)(struct bnx2x *bp); + + /* Prepare/Release FW resources */ + int (*init_fw)(struct bnx2x *bp); + void (*release_fw)(struct bnx2x *bp); +}; + +struct bnx2x_func_sp_obj { + enum bnx2x_func_state state, next_state; + + /* BNX2X_FUNC_CMD_XX bits. This object implements "one + * pending" paradigm but for debug and tracing purposes it's + * more convenient to have different bits for different + * commands. + */ + unsigned long pending; + + /* Buffer to use as a ramrod data and its mapping */ + void *rdata; + dma_addr_t rdata_mapping; + + /* Buffer to use as a afex ramrod data and its mapping. + * This can't be same rdata as above because afex ramrod requests + * can arrive to the object in parallel to other ramrod requests. + */ + void *afex_rdata; + dma_addr_t afex_rdata_mapping; + + /* this mutex validates that when pending flag is taken, the next + * ramrod to be sent will be the one set the pending bit + */ + struct mutex one_pending_mutex; + + /* Driver interface */ + struct bnx2x_func_sp_drv_ops *drv; + + /** + * Performs one state change according to the given parameters. + * + * @return 0 in case of success and negative value otherwise. + */ + int (*send_cmd)(struct bnx2x *bp, + struct bnx2x_func_state_params *params); + + /** + * Checks that the requested state transition is legal. + */ + int (*check_transition)(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + struct bnx2x_func_state_params *params); + + /** + * Completes the pending command. + */ + int (*complete_cmd)(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd); + + int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd); +}; + +/********************** Interfaces ********************************************/ +/* Queueable objects set */ +union bnx2x_qable_obj { + struct bnx2x_vlan_mac_obj vlan_mac; +}; +/************** Function state update *********/ +void bnx2x_init_func_obj(struct bnx2x *bp, + struct bnx2x_func_sp_obj *obj, + void *rdata, dma_addr_t rdata_mapping, + void *afex_rdata, dma_addr_t afex_rdata_mapping, + struct bnx2x_func_sp_drv_ops *drv_iface); + +int bnx2x_func_state_change(struct bnx2x *bp, + struct bnx2x_func_state_params *params); + +enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o); +/******************* Queue State **************/ +void bnx2x_init_queue_obj(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 *cids, + u8 cid_cnt, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, unsigned long type); + +int bnx2x_queue_state_change(struct bnx2x *bp, + struct bnx2x_queue_state_params *params); + +int bnx2x_get_q_logical_state(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj); + +/********************* VLAN-MAC ****************/ +void bnx2x_init_mac_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool); + +void bnx2x_init_vlan_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *vlan_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *vlans_pool); + +void bnx2x_init_vlan_mac_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *vlan_mac_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool, + struct bnx2x_credit_pool_obj *vlans_pool); + +int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o); +void bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o); +int bnx2x_vlan_mac_h_write_lock(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o); +int bnx2x_config_vlan_mac(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p); + +int bnx2x_vlan_mac_move(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p, + struct bnx2x_vlan_mac_obj *dest_o); + +/********************* RX MODE ****************/ + +void bnx2x_init_rx_mode_obj(struct bnx2x *bp, + struct bnx2x_rx_mode_obj *o); + +/** + * bnx2x_config_rx_mode - Send and RX_MODE ramrod according to the provided parameters. + * + * @p: Command parameters + * + * Return: 0 - if operation was successful and there is no pending completions, + * positive number - if there are pending completions, + * negative - if there were errors + */ +int bnx2x_config_rx_mode(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p); + +/****************** MULTICASTS ****************/ + +void bnx2x_init_mcast_obj(struct bnx2x *bp, + struct bnx2x_mcast_obj *mcast_obj, + u8 mcast_cl_id, u32 mcast_cid, u8 func_id, + u8 engine_id, void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, + bnx2x_obj_type type); + +/** + * bnx2x_config_mcast - Configure multicast MACs list. + * + * @cmd: command to execute: BNX2X_MCAST_CMD_X + * + * May configure a new list + * provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up + * (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current + * configuration, continue to execute the pending commands + * (BNX2X_MCAST_CMD_CONT). + * + * If previous command is still pending or if number of MACs to + * configure is more that maximum number of MACs in one command, + * the current command will be enqueued to the tail of the + * pending commands list. + * + * Return: 0 is operation was successful and there are no pending completions, + * negative if there were errors, positive if there are pending + * completions. + */ +int bnx2x_config_mcast(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + enum bnx2x_mcast_cmd cmd); + +/****************** CREDIT POOL ****************/ +void bnx2x_init_mac_credit_pool(struct bnx2x *bp, + struct bnx2x_credit_pool_obj *p, u8 func_id, + u8 func_num); +void bnx2x_init_vlan_credit_pool(struct bnx2x *bp, + struct bnx2x_credit_pool_obj *p, u8 func_id, + u8 func_num); +void bnx2x_init_credit_pool(struct bnx2x_credit_pool_obj *p, + int base, int credit); + +/****************** RSS CONFIGURATION ****************/ +void bnx2x_init_rss_config_obj(struct bnx2x *bp, + struct bnx2x_rss_config_obj *rss_obj, + u8 cl_id, u32 cid, u8 func_id, u8 engine_id, + void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, + bnx2x_obj_type type); + +/** + * bnx2x_config_rss - Updates RSS configuration according to provided parameters + * + * Return: 0 in case of success + */ +int bnx2x_config_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *p); + +/** + * bnx2x_get_rss_ind_table - Return the current ind_table configuration. + * + * @ind_table: buffer to fill with the current indirection + * table content. Should be at least + * T_ETH_INDIRECTION_TABLE_SIZE bytes long. + */ +void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj, + u8 *ind_table); + +#define PF_MAC_CREDIT_E2(bp, func_num) \ + ((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(bp) * VF_MAC_CREDIT_CNT) / \ + func_num + GET_NUM_VFS_PER_PF(bp) * VF_MAC_CREDIT_CNT) + +#define PF_VLAN_CREDIT_E2(bp, func_num) \ + ((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(bp) * VF_VLAN_CREDIT_CNT) / \ + func_num + GET_NUM_VFS_PER_PF(bp) * VF_VLAN_CREDIT_CNT) + +#endif /* BNX2X_SP_VERBS */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c new file mode 100644 index 000000000..b3ff8d13c --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -0,0 +1,3141 @@ +/* bnx2x_sriov.c: QLogic Everest network driver. + * + * Copyright 2009-2013 Broadcom Corporation + * Copyright 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other QLogic software provided under a + * license other than the GPL, without QLogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Shmulik Ravid + * Ariel Elior <ariel.elior@qlogic.com> + * + */ +#include "bnx2x.h" +#include "bnx2x_init.h" +#include "bnx2x_cmn.h" +#include "bnx2x_sp.h" +#include <linux/crc32.h> +#include <linux/if_vlan.h> + +static int bnx2x_vf_op_prep(struct bnx2x *bp, int vfidx, + struct bnx2x_virtf **vf, + struct pf_vf_bulletin_content **bulletin, + bool test_queue); + +/* General service functions */ +static void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, + u16 pf_id) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); +} + +static void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, + u8 enable) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), + enable); +} + +int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) +{ + int idx; + + for_each_vf(bp, idx) + if (bnx2x_vf(bp, idx, abs_vfid) == abs_vfid) + break; + return idx; +} + +static +struct bnx2x_virtf *bnx2x_vf_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) +{ + u16 idx = (u16)bnx2x_vf_idx_by_abs_fid(bp, abs_vfid); + return (idx < BNX2X_NR_VIRTFN(bp)) ? BP_VF(bp, idx) : NULL; +} + +static void bnx2x_vf_igu_ack_sb(struct bnx2x *bp, struct bnx2x_virtf *vf, + u8 igu_sb_id, u8 segment, u16 index, u8 op, + u8 update) +{ + /* acking a VF sb through the PF - use the GRC */ + u32 ctl; + u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; + u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; + u32 func_encode = vf->abs_vfid; + u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + igu_sb_id; + struct igu_regular cmd_data = {0}; + + cmd_data.sb_id_and_flags = + ((index << IGU_REGULAR_SB_INDEX_SHIFT) | + (segment << IGU_REGULAR_SEGMENT_ACCESS_SHIFT) | + (update << IGU_REGULAR_BUPDATE_SHIFT) | + (op << IGU_REGULAR_ENABLE_INT_SHIFT)); + + ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | + func_encode << IGU_CTRL_REG_FID_SHIFT | + IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; + + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + cmd_data.sb_id_and_flags, igu_addr_data); + REG_WR(bp, igu_addr_data, cmd_data.sb_id_and_flags); + mmiowb(); + barrier(); + + DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", + ctl, igu_addr_ctl); + REG_WR(bp, igu_addr_ctl, ctl); + mmiowb(); + barrier(); +} + +static bool bnx2x_validate_vf_sp_objs(struct bnx2x *bp, + struct bnx2x_virtf *vf, + bool print_err) +{ + if (!bnx2x_leading_vfq(vf, sp_initialized)) { + if (print_err) + BNX2X_ERR("Slowpath objects not yet initialized!\n"); + else + DP(BNX2X_MSG_IOV, "Slowpath objects not yet initialized!\n"); + return false; + } + return true; +} + +/* VFOP operations states */ +void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx) +{ + DP(BNX2X_MSG_IOV, + "VF[%d] Q_SETUP: txq[%d]-- vfsb=%d, sb-index=%d, hc-rate=%d, flags=0x%lx, traffic-type=%d", + vf->abs_vfid, + q_idx, + sb_idx, + init_params->tx.sb_cq_index, + init_params->tx.hc_rate, + setup_params->flags, + setup_params->txq_params.traffic_type); +} + +void bnx2x_vfop_qctor_dump_rx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx) +{ + struct bnx2x_rxq_setup_params *rxq_params = &setup_params->rxq_params; + + DP(BNX2X_MSG_IOV, "VF[%d] Q_SETUP: rxq[%d]-- vfsb=%d, sb-index=%d, hc-rate=%d, mtu=%d, buf-size=%d\n" + "sge-size=%d, max_sge_pkt=%d, tpa-agg-size=%d, flags=0x%lx, drop-flags=0x%x, cache-log=%d\n", + vf->abs_vfid, + q_idx, + sb_idx, + init_params->rx.sb_cq_index, + init_params->rx.hc_rate, + setup_params->gen_params.mtu, + rxq_params->buf_sz, + rxq_params->sge_buf_sz, + rxq_params->max_sges_pkt, + rxq_params->tpa_agg_sz, + setup_params->flags, + rxq_params->drop_flags, + rxq_params->cache_line_log); +} + +void bnx2x_vfop_qctor_prep(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q, + struct bnx2x_vf_queue_construct_params *p, + unsigned long q_type) +{ + struct bnx2x_queue_init_params *init_p = &p->qstate.params.init; + struct bnx2x_queue_setup_params *setup_p = &p->prep_qsetup; + + /* INIT */ + + /* Enable host coalescing in the transition to INIT state */ + if (test_bit(BNX2X_Q_FLG_HC, &init_p->rx.flags)) + __set_bit(BNX2X_Q_FLG_HC_EN, &init_p->rx.flags); + + if (test_bit(BNX2X_Q_FLG_HC, &init_p->tx.flags)) + __set_bit(BNX2X_Q_FLG_HC_EN, &init_p->tx.flags); + + /* FW SB ID */ + init_p->rx.fw_sb_id = vf_igu_sb(vf, q->sb_idx); + init_p->tx.fw_sb_id = vf_igu_sb(vf, q->sb_idx); + + /* context */ + init_p->cxts[0] = q->cxt; + + /* SETUP */ + + /* Setup-op general parameters */ + setup_p->gen_params.spcl_id = vf->sp_cl_id; + setup_p->gen_params.stat_id = vfq_stat_id(vf, q); + setup_p->gen_params.fp_hsi = vf->fp_hsi; + + /* Setup-op flags: + * collect statistics, zero statistics, local-switching, security, + * OV for Flex10, RSS and MCAST for leading + */ + if (test_bit(BNX2X_Q_FLG_STATS, &setup_p->flags)) + __set_bit(BNX2X_Q_FLG_ZERO_STATS, &setup_p->flags); + + /* for VFs, enable tx switching, bd coherency, and mac address + * anti-spoofing + */ + __set_bit(BNX2X_Q_FLG_TX_SWITCH, &setup_p->flags); + __set_bit(BNX2X_Q_FLG_TX_SEC, &setup_p->flags); + __set_bit(BNX2X_Q_FLG_ANTI_SPOOF, &setup_p->flags); + + /* Setup-op rx parameters */ + if (test_bit(BNX2X_Q_TYPE_HAS_RX, &q_type)) { + struct bnx2x_rxq_setup_params *rxq_p = &setup_p->rxq_params; + + rxq_p->cl_qzone_id = vfq_qzone_id(vf, q); + rxq_p->fw_sb_id = vf_igu_sb(vf, q->sb_idx); + rxq_p->rss_engine_id = FW_VF_HANDLE(vf->abs_vfid); + + if (test_bit(BNX2X_Q_FLG_TPA, &setup_p->flags)) + rxq_p->max_tpa_queues = BNX2X_VF_MAX_TPA_AGG_QUEUES; + } + + /* Setup-op tx parameters */ + if (test_bit(BNX2X_Q_TYPE_HAS_TX, &q_type)) { + setup_p->txq_params.tss_leading_cl_id = vf->leading_rss; + setup_p->txq_params.fw_sb_id = vf_igu_sb(vf, q->sb_idx); + } +} + +static int bnx2x_vf_queue_create(struct bnx2x *bp, + struct bnx2x_virtf *vf, int qid, + struct bnx2x_vf_queue_construct_params *qctor) +{ + struct bnx2x_queue_state_params *q_params; + int rc = 0; + + DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid); + + /* Prepare ramrod information */ + q_params = &qctor->qstate; + q_params->q_obj = &bnx2x_vfq(vf, qid, sp_obj); + set_bit(RAMROD_COMP_WAIT, &q_params->ramrod_flags); + + if (bnx2x_get_q_logical_state(bp, q_params->q_obj) == + BNX2X_Q_LOGICAL_STATE_ACTIVE) { + DP(BNX2X_MSG_IOV, "queue was already up. Aborting gracefully\n"); + goto out; + } + + /* Run Queue 'construction' ramrods */ + q_params->cmd = BNX2X_Q_CMD_INIT; + rc = bnx2x_queue_state_change(bp, q_params); + if (rc) + goto out; + + memcpy(&q_params->params.setup, &qctor->prep_qsetup, + sizeof(struct bnx2x_queue_setup_params)); + q_params->cmd = BNX2X_Q_CMD_SETUP; + rc = bnx2x_queue_state_change(bp, q_params); + if (rc) + goto out; + + /* enable interrupts */ + bnx2x_vf_igu_ack_sb(bp, vf, vf_igu_sb(vf, bnx2x_vfq(vf, qid, sb_idx)), + USTORM_ID, 0, IGU_INT_ENABLE, 0); +out: + return rc; +} + +static int bnx2x_vf_queue_destroy(struct bnx2x *bp, struct bnx2x_virtf *vf, + int qid) +{ + enum bnx2x_queue_cmd cmds[] = {BNX2X_Q_CMD_HALT, + BNX2X_Q_CMD_TERMINATE, + BNX2X_Q_CMD_CFC_DEL}; + struct bnx2x_queue_state_params q_params; + int rc, i; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + /* Prepare ramrod information */ + memset(&q_params, 0, sizeof(struct bnx2x_queue_state_params)); + q_params.q_obj = &bnx2x_vfq(vf, qid, sp_obj); + set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + if (bnx2x_get_q_logical_state(bp, q_params.q_obj) == + BNX2X_Q_LOGICAL_STATE_STOPPED) { + DP(BNX2X_MSG_IOV, "queue was already stopped. Aborting gracefully\n"); + goto out; + } + + /* Run Queue 'destruction' ramrods */ + for (i = 0; i < ARRAY_SIZE(cmds); i++) { + q_params.cmd = cmds[i]; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to run Queue command %d\n", cmds[i]); + return rc; + } + } +out: + /* Clean Context */ + if (bnx2x_vfq(vf, qid, cxt)) { + bnx2x_vfq(vf, qid, cxt)->ustorm_ag_context.cdu_usage = 0; + bnx2x_vfq(vf, qid, cxt)->xstorm_ag_context.cdu_reserved = 0; + } + + return 0; +} + +static void +bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid) +{ + struct bnx2x_virtf *vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + if (vf) { + /* the first igu entry belonging to VFs of this PF */ + if (!BP_VFDB(bp)->first_vf_igu_entry) + BP_VFDB(bp)->first_vf_igu_entry = igu_sb_id; + + /* the first igu entry belonging to this VF */ + if (!vf_sb_count(vf)) + vf->igu_base_id = igu_sb_id; + + ++vf_sb_count(vf); + ++vf->sb_count; + } + BP_VFDB(bp)->vf_sbs_pool++; +} + +static inline void bnx2x_vf_vlan_credit(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *obj, + atomic_t *counter) +{ + struct list_head *pos; + int read_lock; + int cnt = 0; + + read_lock = bnx2x_vlan_mac_h_read_lock(bp, obj); + if (read_lock) + DP(BNX2X_MSG_SP, "Failed to take vlan mac read head; continuing anyway\n"); + + list_for_each(pos, &obj->head) + cnt++; + + if (!read_lock) + bnx2x_vlan_mac_h_read_unlock(bp, obj); + + atomic_set(counter, cnt); +} + +static int bnx2x_vf_vlan_mac_clear(struct bnx2x *bp, struct bnx2x_virtf *vf, + int qid, bool drv_only, int type) +{ + struct bnx2x_vlan_mac_ramrod_params ramrod; + int rc; + + DP(BNX2X_MSG_IOV, "vf[%d] - deleting all %s\n", vf->abs_vfid, + (type == BNX2X_VF_FILTER_VLAN_MAC) ? "VLAN-MACs" : + (type == BNX2X_VF_FILTER_MAC) ? "MACs" : "VLANs"); + + /* Prepare ramrod params */ + memset(&ramrod, 0, sizeof(struct bnx2x_vlan_mac_ramrod_params)); + if (type == BNX2X_VF_FILTER_VLAN_MAC) { + set_bit(BNX2X_ETH_MAC, &ramrod.user_req.vlan_mac_flags); + ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_mac_obj); + } else if (type == BNX2X_VF_FILTER_MAC) { + set_bit(BNX2X_ETH_MAC, &ramrod.user_req.vlan_mac_flags); + ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj); + } else { + ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj); + } + ramrod.user_req.cmd = BNX2X_VLAN_MAC_DEL; + + set_bit(RAMROD_EXEC, &ramrod.ramrod_flags); + if (drv_only) + set_bit(RAMROD_DRV_CLR_ONLY, &ramrod.ramrod_flags); + else + set_bit(RAMROD_COMP_WAIT, &ramrod.ramrod_flags); + + /* Start deleting */ + rc = ramrod.vlan_mac_obj->delete_all(bp, + ramrod.vlan_mac_obj, + &ramrod.user_req.vlan_mac_flags, + &ramrod.ramrod_flags); + if (rc) { + BNX2X_ERR("Failed to delete all %s\n", + (type == BNX2X_VF_FILTER_VLAN_MAC) ? "VLAN-MACs" : + (type == BNX2X_VF_FILTER_MAC) ? "MACs" : "VLANs"); + return rc; + } + + return 0; +} + +static int bnx2x_vf_mac_vlan_config(struct bnx2x *bp, + struct bnx2x_virtf *vf, int qid, + struct bnx2x_vf_mac_vlan_filter *filter, + bool drv_only) +{ + struct bnx2x_vlan_mac_ramrod_params ramrod; + int rc; + + DP(BNX2X_MSG_IOV, "vf[%d] - %s a %s filter\n", + vf->abs_vfid, filter->add ? "Adding" : "Deleting", + (filter->type == BNX2X_VF_FILTER_VLAN_MAC) ? "VLAN-MAC" : + (filter->type == BNX2X_VF_FILTER_MAC) ? "MAC" : "VLAN"); + + /* Prepare ramrod params */ + memset(&ramrod, 0, sizeof(struct bnx2x_vlan_mac_ramrod_params)); + if (filter->type == BNX2X_VF_FILTER_VLAN_MAC) { + ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_mac_obj); + ramrod.user_req.u.vlan.vlan = filter->vid; + memcpy(&ramrod.user_req.u.mac.mac, filter->mac, ETH_ALEN); + set_bit(BNX2X_ETH_MAC, &ramrod.user_req.vlan_mac_flags); + } else if (filter->type == BNX2X_VF_FILTER_VLAN) { + ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, vlan_obj); + ramrod.user_req.u.vlan.vlan = filter->vid; + } else { + set_bit(BNX2X_ETH_MAC, &ramrod.user_req.vlan_mac_flags); + ramrod.vlan_mac_obj = &bnx2x_vfq(vf, qid, mac_obj); + memcpy(&ramrod.user_req.u.mac.mac, filter->mac, ETH_ALEN); + } + ramrod.user_req.cmd = filter->add ? BNX2X_VLAN_MAC_ADD : + BNX2X_VLAN_MAC_DEL; + + set_bit(RAMROD_EXEC, &ramrod.ramrod_flags); + if (drv_only) + set_bit(RAMROD_DRV_CLR_ONLY, &ramrod.ramrod_flags); + else + set_bit(RAMROD_COMP_WAIT, &ramrod.ramrod_flags); + + /* Add/Remove the filter */ + rc = bnx2x_config_vlan_mac(bp, &ramrod); + if (rc == -EEXIST) + return 0; + if (rc) { + BNX2X_ERR("Failed to %s %s\n", + filter->add ? "add" : "delete", + (filter->type == BNX2X_VF_FILTER_VLAN_MAC) ? + "VLAN-MAC" : + (filter->type == BNX2X_VF_FILTER_MAC) ? + "MAC" : "VLAN"); + return rc; + } + + filter->applied = true; + + return 0; +} + +int bnx2x_vf_mac_vlan_config_list(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mac_vlan_filters *filters, + int qid, bool drv_only) +{ + int rc = 0, i; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + if (!bnx2x_validate_vf_sp_objs(bp, vf, true)) + return -EINVAL; + + /* Prepare ramrod params */ + for (i = 0; i < filters->count; i++) { + rc = bnx2x_vf_mac_vlan_config(bp, vf, qid, + &filters->filters[i], drv_only); + if (rc) + break; + } + + /* Rollback if needed */ + if (i != filters->count) { + BNX2X_ERR("Managed only %d/%d filters - rolling back\n", + i, filters->count); + while (--i >= 0) { + if (!filters->filters[i].applied) + continue; + filters->filters[i].add = !filters->filters[i].add; + bnx2x_vf_mac_vlan_config(bp, vf, qid, + &filters->filters[i], + drv_only); + } + } + + /* It's our responsibility to free the filters */ + kfree(filters); + + return rc; +} + +int bnx2x_vf_queue_setup(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid, + struct bnx2x_vf_queue_construct_params *qctor) +{ + int rc; + + DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid); + + rc = bnx2x_vf_queue_create(bp, vf, qid, qctor); + if (rc) + goto op_err; + + /* Schedule the configuration of any pending vlan filters */ + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_HYPERVISOR_VLAN, + BNX2X_MSG_IOV); + return 0; +op_err: + BNX2X_ERR("QSETUP[%d:%d] error: rc %d\n", vf->abs_vfid, qid, rc); + return rc; +} + +static int bnx2x_vf_queue_flr(struct bnx2x *bp, struct bnx2x_virtf *vf, + int qid) +{ + int rc; + + DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid); + + /* If needed, clean the filtering data base */ + if ((qid == LEADING_IDX) && + bnx2x_validate_vf_sp_objs(bp, vf, false)) { + rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, true, + BNX2X_VF_FILTER_VLAN_MAC); + if (rc) + goto op_err; + rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, true, + BNX2X_VF_FILTER_VLAN); + if (rc) + goto op_err; + rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, true, + BNX2X_VF_FILTER_MAC); + if (rc) + goto op_err; + } + + /* Terminate queue */ + if (bnx2x_vfq(vf, qid, sp_obj).state != BNX2X_Q_STATE_RESET) { + struct bnx2x_queue_state_params qstate; + + memset(&qstate, 0, sizeof(struct bnx2x_queue_state_params)); + qstate.q_obj = &bnx2x_vfq(vf, qid, sp_obj); + qstate.q_obj->state = BNX2X_Q_STATE_STOPPED; + qstate.cmd = BNX2X_Q_CMD_TERMINATE; + set_bit(RAMROD_COMP_WAIT, &qstate.ramrod_flags); + rc = bnx2x_queue_state_change(bp, &qstate); + if (rc) + goto op_err; + } + + return 0; +op_err: + BNX2X_ERR("vf[%d:%d] error: rc %d\n", vf->abs_vfid, qid, rc); + return rc; +} + +int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf, + bnx2x_mac_addr_t *mcasts, int mc_num, bool drv_only) +{ + struct bnx2x_mcast_list_elem *mc = NULL; + struct bnx2x_mcast_ramrod_params mcast; + int rc, i; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + /* Prepare Multicast command */ + memset(&mcast, 0, sizeof(struct bnx2x_mcast_ramrod_params)); + mcast.mcast_obj = &vf->mcast_obj; + if (drv_only) + set_bit(RAMROD_DRV_CLR_ONLY, &mcast.ramrod_flags); + else + set_bit(RAMROD_COMP_WAIT, &mcast.ramrod_flags); + if (mc_num) { + mc = kcalloc(mc_num, sizeof(struct bnx2x_mcast_list_elem), + GFP_KERNEL); + if (!mc) { + BNX2X_ERR("Cannot Configure multicasts due to lack of memory\n"); + return -ENOMEM; + } + } + + if (mc_num) { + INIT_LIST_HEAD(&mcast.mcast_list); + for (i = 0; i < mc_num; i++) { + mc[i].mac = mcasts[i]; + list_add_tail(&mc[i].link, + &mcast.mcast_list); + } + + /* add new mcasts */ + mcast.mcast_list_len = mc_num; + rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_SET); + if (rc) + BNX2X_ERR("Failed to set multicasts\n"); + } else { + /* clear existing mcasts */ + rc = bnx2x_config_mcast(bp, &mcast, BNX2X_MCAST_CMD_DEL); + if (rc) + BNX2X_ERR("Failed to remove multicasts\n"); + } + + kfree(mc); + + return rc; +} + +static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid, + struct bnx2x_rx_mode_ramrod_params *ramrod, + struct bnx2x_virtf *vf, + unsigned long accept_flags) +{ + struct bnx2x_vf_queue *vfq = vfq_get(vf, qid); + + memset(ramrod, 0, sizeof(*ramrod)); + ramrod->cid = vfq->cid; + ramrod->cl_id = vfq_cl_id(vf, vfq); + ramrod->rx_mode_obj = &bp->rx_mode_obj; + ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid); + ramrod->rx_accept_flags = accept_flags; + ramrod->tx_accept_flags = accept_flags; + ramrod->pstate = &vf->filter_state; + ramrod->state = BNX2X_FILTER_RX_MODE_PENDING; + + set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state); + set_bit(RAMROD_RX, &ramrod->ramrod_flags); + set_bit(RAMROD_TX, &ramrod->ramrod_flags); + + ramrod->rdata = bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2); + ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2); +} + +int bnx2x_vf_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf, + int qid, unsigned long accept_flags) +{ + struct bnx2x_rx_mode_ramrod_params ramrod; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + bnx2x_vf_prep_rx_mode(bp, qid, &ramrod, vf, accept_flags); + set_bit(RAMROD_COMP_WAIT, &ramrod.ramrod_flags); + vfq_get(vf, qid)->accept_flags = ramrod.rx_accept_flags; + return bnx2x_config_rx_mode(bp, &ramrod); +} + +int bnx2x_vf_queue_teardown(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid) +{ + int rc; + + DP(BNX2X_MSG_IOV, "vf[%d:%d]\n", vf->abs_vfid, qid); + + /* Remove all classification configuration for leading queue */ + if (qid == LEADING_IDX) { + rc = bnx2x_vf_rxmode(bp, vf, qid, 0); + if (rc) + goto op_err; + + /* Remove filtering if feasible */ + if (bnx2x_validate_vf_sp_objs(bp, vf, true)) { + rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, + false, + BNX2X_VF_FILTER_VLAN_MAC); + if (rc) + goto op_err; + rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, + false, + BNX2X_VF_FILTER_VLAN); + if (rc) + goto op_err; + rc = bnx2x_vf_vlan_mac_clear(bp, vf, qid, + false, + BNX2X_VF_FILTER_MAC); + if (rc) + goto op_err; + rc = bnx2x_vf_mcast(bp, vf, NULL, 0, false); + if (rc) + goto op_err; + } + } + + /* Destroy queue */ + rc = bnx2x_vf_queue_destroy(bp, vf, qid); + if (rc) + goto op_err; + return rc; +op_err: + BNX2X_ERR("vf[%d:%d] error: rc %d\n", + vf->abs_vfid, qid, rc); + return rc; +} + +/* VF enable primitives + * when pretend is required the caller is responsible + * for calling pretend prior to calling these routines + */ + +/* internal vf enable - until vf is enabled internally all transactions + * are blocked. This routine should always be called last with pretend. + */ +static void bnx2x_vf_enable_internal(struct bnx2x *bp, u8 enable) +{ + REG_WR(bp, PGLUE_B_REG_INTERNAL_VFID_ENABLE, enable ? 1 : 0); +} + +/* clears vf error in all semi blocks */ +static void bnx2x_vf_semi_clear_err(struct bnx2x *bp, u8 abs_vfid) +{ + REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, abs_vfid); + REG_WR(bp, USEM_REG_VFPF_ERR_NUM, abs_vfid); + REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, abs_vfid); + REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, abs_vfid); +} + +static void bnx2x_vf_pglue_clear_err(struct bnx2x *bp, u8 abs_vfid) +{ + u32 was_err_group = (2 * BP_PATH(bp) + abs_vfid) >> 5; + u32 was_err_reg = 0; + + switch (was_err_group) { + case 0: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR; + break; + case 1: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR; + break; + case 2: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR; + break; + case 3: + was_err_reg = PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR; + break; + } + REG_WR(bp, was_err_reg, 1 << (abs_vfid & 0x1f)); +} + +static void bnx2x_vf_igu_reset(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int i; + u32 val; + + /* Set VF masks and configuration - pretend */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); + + val = REG_RD(bp, IGU_REG_VF_CONFIGURATION); + val |= (IGU_VF_CONF_FUNC_EN | IGU_VF_CONF_MSI_MSIX_EN); + val &= ~IGU_VF_CONF_PARENT_MASK; + val |= (BP_ABS_FUNC(bp) >> 1) << IGU_VF_CONF_PARENT_SHIFT; + REG_WR(bp, IGU_REG_VF_CONFIGURATION, val); + + DP(BNX2X_MSG_IOV, + "value in IGU_REG_VF_CONFIGURATION of vf %d after write is 0x%08x\n", + vf->abs_vfid, val); + + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + /* iterate over all queues, clear sb consumer */ + for (i = 0; i < vf_sb_count(vf); i++) { + u8 igu_sb_id = vf_igu_sb(vf, i); + + /* zero prod memory */ + REG_WR(bp, IGU_REG_PROD_CONS_MEMORY + igu_sb_id * 4, 0); + + /* clear sb state machine */ + bnx2x_igu_clear_sb_gen(bp, vf->abs_vfid, igu_sb_id, + false /* VF */); + + /* disable + update */ + bnx2x_vf_igu_ack_sb(bp, vf, igu_sb_id, USTORM_ID, 0, + IGU_INT_DISABLE, 1); + } +} + +void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid) +{ + /* set the VF-PF association in the FW */ + storm_memset_vf_to_pf(bp, FW_VF_HANDLE(abs_vfid), BP_FUNC(bp)); + storm_memset_func_en(bp, FW_VF_HANDLE(abs_vfid), 1); + + /* clear vf errors*/ + bnx2x_vf_semi_clear_err(bp, abs_vfid); + bnx2x_vf_pglue_clear_err(bp, abs_vfid); + + /* internal vf-enable - pretend */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, abs_vfid)); + DP(BNX2X_MSG_IOV, "enabling internal access for vf %x\n", abs_vfid); + bnx2x_vf_enable_internal(bp, true); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + +static void bnx2x_vf_enable_traffic(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + /* Reset vf in IGU interrupts are still disabled */ + bnx2x_vf_igu_reset(bp, vf); + + /* pretend to enable the vf with the PBF */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + REG_WR(bp, PBF_REG_DISABLE_VF, 0); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + +static u8 bnx2x_vf_is_pcie_pending(struct bnx2x *bp, u8 abs_vfid) +{ + struct pci_dev *dev; + struct bnx2x_virtf *vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + + if (!vf) + return false; + + dev = pci_get_domain_bus_and_slot(vf->domain, vf->bus, vf->devfn); + if (dev) + return bnx2x_is_pcie_pending(dev); + return false; +} + +int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid) +{ + /* Verify no pending pci transactions */ + if (bnx2x_vf_is_pcie_pending(bp, abs_vfid)) + BNX2X_ERR("PCIE Transactions still pending\n"); + + return 0; +} + +/* must be called after the number of PF queues and the number of VFs are + * both known + */ +static void +bnx2x_iov_static_resc(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + struct vf_pf_resc_request *resc = &vf->alloc_resc; + + /* will be set only during VF-ACQUIRE */ + resc->num_rxqs = 0; + resc->num_txqs = 0; + + resc->num_mac_filters = VF_MAC_CREDIT_CNT; + resc->num_vlan_filters = VF_VLAN_CREDIT_CNT; + + /* no real limitation */ + resc->num_mc_filters = 0; + + /* num_sbs already set */ + resc->num_sbs = vf->sb_count; +} + +/* FLR routines: */ +static void bnx2x_vf_free_resc(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + /* reset the state variables */ + bnx2x_iov_static_resc(bp, vf); + vf->state = VF_FREE; +} + +static void bnx2x_vf_flr_clnup_hw(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); + + /* DQ usage counter */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + bnx2x_flr_clnup_poll_hw_counter(bp, DORQ_REG_VF_USAGE_CNT, + "DQ VF usage counter timed out", + poll_cnt); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + /* FW cleanup command - poll for the results */ + if (bnx2x_send_final_clnup(bp, (u8)FW_VF_HANDLE(vf->abs_vfid), + poll_cnt)) + BNX2X_ERR("VF[%d] Final cleanup timed-out\n", vf->abs_vfid); + + /* verify TX hw is flushed */ + bnx2x_tx_hw_flushed(bp, poll_cnt); +} + +static void bnx2x_vf_flr(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int rc, i; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + /* the cleanup operations are valid if and only if the VF + * was first acquired. + */ + for (i = 0; i < vf_rxq_count(vf); i++) { + rc = bnx2x_vf_queue_flr(bp, vf, i); + if (rc) + goto out; + } + + /* remove multicasts */ + bnx2x_vf_mcast(bp, vf, NULL, 0, true); + + /* dispatch final cleanup and wait for HW queues to flush */ + bnx2x_vf_flr_clnup_hw(bp, vf); + + /* release VF resources */ + bnx2x_vf_free_resc(bp, vf); + + vf->malicious = false; + + /* re-open the mailbox */ + bnx2x_vf_enable_mbx(bp, vf->abs_vfid); + return; +out: + BNX2X_ERR("vf[%d:%d] failed flr: rc %d\n", + vf->abs_vfid, i, rc); +} + +static void bnx2x_vf_flr_clnup(struct bnx2x *bp) +{ + struct bnx2x_virtf *vf; + int i; + + for (i = 0; i < BNX2X_NR_VIRTFN(bp); i++) { + /* VF should be RESET & in FLR cleanup states */ + if (bnx2x_vf(bp, i, state) != VF_RESET || + !bnx2x_vf(bp, i, flr_clnup_stage)) + continue; + + DP(BNX2X_MSG_IOV, "next vf to cleanup: %d. Num of vfs: %d\n", + i, BNX2X_NR_VIRTFN(bp)); + + vf = BP_VF(bp, i); + + /* lock the vf pf channel */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR); + + /* invoke the VF FLR SM */ + bnx2x_vf_flr(bp, vf); + + /* mark the VF to be ACKED and continue */ + vf->flr_clnup_stage = false; + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_FLR); + } + + /* Acknowledge the handled VFs. + * we are acknowledge all the vfs which an flr was requested for, even + * if amongst them there are such that we never opened, since the mcp + * will interrupt us immediately again if we only ack some of the bits, + * resulting in an endless loop. This can happen for example in KVM + * where an 'all ones' flr request is sometimes given by hyper visor + */ + DP(BNX2X_MSG_MCP, "DRV_STATUS_VF_DISABLED ACK for vfs 0x%x 0x%x\n", + bp->vfdb->flrd_vfs[0], bp->vfdb->flrd_vfs[1]); + for (i = 0; i < FLRD_VFS_DWORDS; i++) + SHMEM2_WR(bp, drv_ack_vf_disabled[BP_FW_MB_IDX(bp)][i], + bp->vfdb->flrd_vfs[i]); + + bnx2x_fw_command(bp, DRV_MSG_CODE_VF_DISABLED_DONE, 0); + + /* clear the acked bits - better yet if the MCP implemented + * write to clear semantics + */ + for (i = 0; i < FLRD_VFS_DWORDS; i++) + SHMEM2_WR(bp, drv_ack_vf_disabled[BP_FW_MB_IDX(bp)][i], 0); +} + +void bnx2x_vf_handle_flr_event(struct bnx2x *bp) +{ + int i; + + /* Read FLR'd VFs */ + for (i = 0; i < FLRD_VFS_DWORDS; i++) + bp->vfdb->flrd_vfs[i] = SHMEM2_RD(bp, mcp_vf_disabled[i]); + + DP(BNX2X_MSG_MCP, + "DRV_STATUS_VF_DISABLED received for vfs 0x%x 0x%x\n", + bp->vfdb->flrd_vfs[0], bp->vfdb->flrd_vfs[1]); + + for_each_vf(bp, i) { + struct bnx2x_virtf *vf = BP_VF(bp, i); + u32 reset = 0; + + if (vf->abs_vfid < 32) + reset = bp->vfdb->flrd_vfs[0] & (1 << vf->abs_vfid); + else + reset = bp->vfdb->flrd_vfs[1] & + (1 << (vf->abs_vfid - 32)); + + if (reset) { + /* set as reset and ready for cleanup */ + vf->state = VF_RESET; + vf->flr_clnup_stage = true; + + DP(BNX2X_MSG_IOV, + "Initiating Final cleanup for VF %d\n", + vf->abs_vfid); + } + } + + /* do the FLR cleanup for all marked VFs*/ + bnx2x_vf_flr_clnup(bp); +} + +/* IOV global initialization routines */ +void bnx2x_iov_init_dq(struct bnx2x *bp) +{ + if (!IS_SRIOV(bp)) + return; + + /* Set the DQ such that the CID reflect the abs_vfid */ + REG_WR(bp, DORQ_REG_VF_NORM_VF_BASE, 0); + REG_WR(bp, DORQ_REG_MAX_RVFID_SIZE, ilog2(BNX2X_MAX_NUM_OF_VFS)); + + /* Set VFs starting CID. If its > 0 the preceding CIDs are belong to + * the PF L2 queues + */ + REG_WR(bp, DORQ_REG_VF_NORM_CID_BASE, BNX2X_FIRST_VF_CID); + + /* The VF window size is the log2 of the max number of CIDs per VF */ + REG_WR(bp, DORQ_REG_VF_NORM_CID_WND_SIZE, BNX2X_VF_CID_WND); + + /* The VF doorbell size 0 - *B, 4 - 128B. We set it here to match + * the Pf doorbell size although the 2 are independent. + */ + REG_WR(bp, DORQ_REG_VF_NORM_CID_OFST, 3); + + /* No security checks for now - + * configure single rule (out of 16) mask = 0x1, value = 0x0, + * CID range 0 - 0x1ffff + */ + REG_WR(bp, DORQ_REG_VF_TYPE_MASK_0, 1); + REG_WR(bp, DORQ_REG_VF_TYPE_VALUE_0, 0); + REG_WR(bp, DORQ_REG_VF_TYPE_MIN_MCID_0, 0); + REG_WR(bp, DORQ_REG_VF_TYPE_MAX_MCID_0, 0x1ffff); + + /* set the VF doorbell threshold. This threshold represents the amount + * of doorbells allowed in the main DORQ fifo for a specific VF. + */ + REG_WR(bp, DORQ_REG_VF_USAGE_CT_LIMIT, 64); +} + +void bnx2x_iov_init_dmae(struct bnx2x *bp) +{ + if (pci_find_ext_capability(bp->pdev, PCI_EXT_CAP_ID_SRIOV)) + REG_WR(bp, DMAE_REG_BACKWARD_COMP_EN, 0); +} + +static int bnx2x_vf_domain(struct bnx2x *bp, int vfid) +{ + struct pci_dev *dev = bp->pdev; + + return pci_domain_nr(dev->bus); +} + +static int bnx2x_vf_bus(struct bnx2x *bp, int vfid) +{ + struct pci_dev *dev = bp->pdev; + struct bnx2x_sriov *iov = &bp->vfdb->sriov; + + return dev->bus->number + ((dev->devfn + iov->offset + + iov->stride * vfid) >> 8); +} + +static int bnx2x_vf_devfn(struct bnx2x *bp, int vfid) +{ + struct pci_dev *dev = bp->pdev; + struct bnx2x_sriov *iov = &bp->vfdb->sriov; + + return (dev->devfn + iov->offset + iov->stride * vfid) & 0xff; +} + +static void bnx2x_vf_set_bars(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int i, n; + struct pci_dev *dev = bp->pdev; + struct bnx2x_sriov *iov = &bp->vfdb->sriov; + + for (i = 0, n = 0; i < PCI_SRIOV_NUM_BARS; i += 2, n++) { + u64 start = pci_resource_start(dev, PCI_IOV_RESOURCES + i); + u32 size = pci_resource_len(dev, PCI_IOV_RESOURCES + i); + + size /= iov->total; + vf->bars[n].bar = start + size * vf->abs_vfid; + vf->bars[n].size = size; + } +} + +static int +bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) +{ + int sb_id; + u32 val; + u8 fid, current_pf = 0; + + /* IGU in normal mode - read CAM */ + for (sb_id = 0; sb_id < IGU_REG_MAPPING_MEMORY_SIZE; sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); + if (fid & IGU_FID_ENCODE_IS_PF) + current_pf = fid & IGU_FID_PF_NUM_MASK; + else if (current_pf == BP_FUNC(bp)) + bnx2x_vf_set_igu_info(bp, sb_id, + (fid & IGU_FID_VF_NUM_MASK)); + DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", + ((fid & IGU_FID_ENCODE_IS_PF) ? "PF" : "VF"), + ((fid & IGU_FID_ENCODE_IS_PF) ? (fid & IGU_FID_PF_NUM_MASK) : + (fid & IGU_FID_VF_NUM_MASK)), sb_id, + GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)); + } + DP(BNX2X_MSG_IOV, "vf_sbs_pool is %d\n", BP_VFDB(bp)->vf_sbs_pool); + return BP_VFDB(bp)->vf_sbs_pool; +} + +static void __bnx2x_iov_free_vfdb(struct bnx2x *bp) +{ + if (bp->vfdb) { + kfree(bp->vfdb->vfqs); + kfree(bp->vfdb->vfs); + kfree(bp->vfdb); + } + bp->vfdb = NULL; +} + +static int bnx2x_sriov_pci_cfg_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + int pos; + struct pci_dev *dev = bp->pdev; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) { + BNX2X_ERR("failed to find SRIOV capability in device\n"); + return -ENODEV; + } + + iov->pos = pos; + DP(BNX2X_MSG_IOV, "sriov ext pos %d\n", pos); + pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &iov->ctrl); + pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &iov->total); + pci_read_config_word(dev, pos + PCI_SRIOV_INITIAL_VF, &iov->initial); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &iov->offset); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &iov->stride); + pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &iov->pgsz); + pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); + pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); + + return 0; +} + +static int bnx2x_sriov_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + u32 val; + + /* read the SRIOV capability structure + * The fields can be read via configuration read or + * directly from the device (starting at offset PCICFG_OFFSET) + */ + if (bnx2x_sriov_pci_cfg_info(bp, iov)) + return -ENODEV; + + /* get the number of SRIOV bars */ + iov->nres = 0; + + /* read the first_vfid */ + val = REG_RD(bp, PCICFG_OFFSET + GRC_CONFIG_REG_PF_INIT_VF); + iov->first_vf_in_pf = ((val & GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK) + * 8) - (BNX2X_MAX_NUM_OF_VFS * BP_PATH(bp)); + + DP(BNX2X_MSG_IOV, + "IOV info[%d]: first vf %d, nres %d, cap 0x%x, ctrl 0x%x, total %d, initial %d, num vfs %d, offset %d, stride %d, page size 0x%x\n", + BP_FUNC(bp), + iov->first_vf_in_pf, iov->nres, iov->cap, iov->ctrl, iov->total, + iov->initial, iov->nr_virtfn, iov->offset, iov->stride, iov->pgsz); + + return 0; +} + +/* must be called after PF bars are mapped */ +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, + int num_vfs_param) +{ + int err, i; + struct bnx2x_sriov *iov; + struct pci_dev *dev = bp->pdev; + + bp->vfdb = NULL; + + /* verify is pf */ + if (IS_VF(bp)) + return 0; + + /* verify sriov capability is present in configuration space */ + if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV)) + return 0; + + /* verify chip revision */ + if (CHIP_IS_E1x(bp)) + return 0; + + /* check if SRIOV support is turned off */ + if (!num_vfs_param) + return 0; + + /* SRIOV assumes that num of PF CIDs < BNX2X_FIRST_VF_CID */ + if (BNX2X_L2_MAX_CID(bp) >= BNX2X_FIRST_VF_CID) { + BNX2X_ERR("PF cids %d are overspilling into vf space (starts at %d). Abort SRIOV\n", + BNX2X_L2_MAX_CID(bp), BNX2X_FIRST_VF_CID); + return 0; + } + + /* SRIOV can be enabled only with MSIX */ + if (int_mode_param == BNX2X_INT_MODE_MSI || + int_mode_param == BNX2X_INT_MODE_INTX) { + BNX2X_ERR("Forced MSI/INTx mode is incompatible with SRIOV\n"); + return 0; + } + + err = -EIO; + /* verify ari is enabled */ + if (!pci_ari_enabled(bp->pdev->bus)) { + BNX2X_ERR("ARI not supported (check pci bridge ARI forwarding), SRIOV can not be enabled\n"); + return 0; + } + + /* verify igu is in normal mode */ + if (CHIP_INT_MODE_IS_BC(bp)) { + BNX2X_ERR("IGU not normal mode, SRIOV can not be enabled\n"); + return 0; + } + + /* allocate the vfs database */ + bp->vfdb = kzalloc(sizeof(*(bp->vfdb)), GFP_KERNEL); + if (!bp->vfdb) { + BNX2X_ERR("failed to allocate vf database\n"); + err = -ENOMEM; + goto failed; + } + + /* get the sriov info - Linux already collected all the pertinent + * information, however the sriov structure is for the private use + * of the pci module. Also we want this information regardless + * of the hyper-visor. + */ + iov = &(bp->vfdb->sriov); + err = bnx2x_sriov_info(bp, iov); + if (err) + goto failed; + + /* SR-IOV capability was enabled but there are no VFs*/ + if (iov->total == 0) { + err = 0; + goto failed; + } + + iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param); + + DP(BNX2X_MSG_IOV, "num_vfs_param was %d, nr_virtfn was %d\n", + num_vfs_param, iov->nr_virtfn); + + /* allocate the vf array */ + bp->vfdb->vfs = kcalloc(BNX2X_NR_VIRTFN(bp), + sizeof(struct bnx2x_virtf), + GFP_KERNEL); + if (!bp->vfdb->vfs) { + BNX2X_ERR("failed to allocate vf array\n"); + err = -ENOMEM; + goto failed; + } + + /* Initial VF init - index and abs_vfid - nr_virtfn must be set */ + for_each_vf(bp, i) { + bnx2x_vf(bp, i, index) = i; + bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i; + bnx2x_vf(bp, i, state) = VF_FREE; + mutex_init(&bnx2x_vf(bp, i, op_mutex)); + bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE; + } + + /* re-read the IGU CAM for VFs - index and abs_vfid must be set */ + if (!bnx2x_get_vf_igu_cam_info(bp)) { + BNX2X_ERR("No entries in IGU CAM for vfs\n"); + err = -EINVAL; + goto failed; + } + + /* allocate the queue arrays for all VFs */ + bp->vfdb->vfqs = kcalloc(BNX2X_MAX_NUM_VF_QUEUES, + sizeof(struct bnx2x_vf_queue), + GFP_KERNEL); + + if (!bp->vfdb->vfqs) { + BNX2X_ERR("failed to allocate vf queue array\n"); + err = -ENOMEM; + goto failed; + } + + /* Prepare the VFs event synchronization mechanism */ + mutex_init(&bp->vfdb->event_mutex); + + mutex_init(&bp->vfdb->bulletin_mutex); + + if (SHMEM2_HAS(bp, sriov_switch_mode)) + SHMEM2_WR(bp, sriov_switch_mode, SRIOV_SWITCH_MODE_VEB); + + return 0; +failed: + DP(BNX2X_MSG_IOV, "Failed err=%d\n", err); + __bnx2x_iov_free_vfdb(bp); + return err; +} + +void bnx2x_iov_remove_one(struct bnx2x *bp) +{ + int vf_idx; + + /* if SRIOV is not enabled there's nothing to do */ + if (!IS_SRIOV(bp)) + return; + + bnx2x_disable_sriov(bp); + + /* disable access to all VFs */ + for (vf_idx = 0; vf_idx < bp->vfdb->sriov.total; vf_idx++) { + bnx2x_pretend_func(bp, + HW_VF_HANDLE(bp, + bp->vfdb->sriov.first_vf_in_pf + + vf_idx)); + DP(BNX2X_MSG_IOV, "disabling internal access for vf %d\n", + bp->vfdb->sriov.first_vf_in_pf + vf_idx); + bnx2x_vf_enable_internal(bp, 0); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + } + + /* free vf database */ + __bnx2x_iov_free_vfdb(bp); +} + +void bnx2x_iov_free_mem(struct bnx2x *bp) +{ + int i; + + if (!IS_SRIOV(bp)) + return; + + /* free vfs hw contexts */ + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *cxt = &bp->vfdb->context[i]; + BNX2X_PCI_FREE(cxt->addr, cxt->mapping, cxt->size); + } + + BNX2X_PCI_FREE(BP_VFDB(bp)->sp_dma.addr, + BP_VFDB(bp)->sp_dma.mapping, + BP_VFDB(bp)->sp_dma.size); + + BNX2X_PCI_FREE(BP_VF_MBX_DMA(bp)->addr, + BP_VF_MBX_DMA(bp)->mapping, + BP_VF_MBX_DMA(bp)->size); + + BNX2X_PCI_FREE(BP_VF_BULLETIN_DMA(bp)->addr, + BP_VF_BULLETIN_DMA(bp)->mapping, + BP_VF_BULLETIN_DMA(bp)->size); +} + +int bnx2x_iov_alloc_mem(struct bnx2x *bp) +{ + size_t tot_size; + int i, rc = 0; + + if (!IS_SRIOV(bp)) + return rc; + + /* allocate vfs hw contexts */ + tot_size = (BP_VFDB(bp)->sriov.first_vf_in_pf + BNX2X_NR_VIRTFN(bp)) * + BNX2X_CIDS_PER_VF * sizeof(union cdu_context); + + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *cxt = BP_VF_CXT_PAGE(bp, i); + cxt->size = min_t(size_t, tot_size, CDU_ILT_PAGE_SZ); + + if (cxt->size) { + cxt->addr = BNX2X_PCI_ALLOC(&cxt->mapping, cxt->size); + if (!cxt->addr) + goto alloc_mem_err; + } else { + cxt->addr = NULL; + cxt->mapping = 0; + } + tot_size -= cxt->size; + } + + /* allocate vfs ramrods dma memory - client_init and set_mac */ + tot_size = BNX2X_NR_VIRTFN(bp) * sizeof(struct bnx2x_vf_sp); + BP_VFDB(bp)->sp_dma.addr = BNX2X_PCI_ALLOC(&BP_VFDB(bp)->sp_dma.mapping, + tot_size); + if (!BP_VFDB(bp)->sp_dma.addr) + goto alloc_mem_err; + BP_VFDB(bp)->sp_dma.size = tot_size; + + /* allocate mailboxes */ + tot_size = BNX2X_NR_VIRTFN(bp) * MBX_MSG_ALIGNED_SIZE; + BP_VF_MBX_DMA(bp)->addr = BNX2X_PCI_ALLOC(&BP_VF_MBX_DMA(bp)->mapping, + tot_size); + if (!BP_VF_MBX_DMA(bp)->addr) + goto alloc_mem_err; + + BP_VF_MBX_DMA(bp)->size = tot_size; + + /* allocate local bulletin boards */ + tot_size = BNX2X_NR_VIRTFN(bp) * BULLETIN_CONTENT_SIZE; + BP_VF_BULLETIN_DMA(bp)->addr = BNX2X_PCI_ALLOC(&BP_VF_BULLETIN_DMA(bp)->mapping, + tot_size); + if (!BP_VF_BULLETIN_DMA(bp)->addr) + goto alloc_mem_err; + + BP_VF_BULLETIN_DMA(bp)->size = tot_size; + + return 0; + +alloc_mem_err: + return -ENOMEM; +} + +static void bnx2x_vfq_init(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q) +{ + u8 cl_id = vfq_cl_id(vf, q); + u8 func_id = FW_VF_HANDLE(vf->abs_vfid); + unsigned long q_type = 0; + + set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + + /* Queue State object */ + bnx2x_init_queue_obj(bp, &q->sp_obj, + cl_id, &q->cid, 1, func_id, + bnx2x_vf_sp(bp, vf, q_data), + bnx2x_vf_sp_map(bp, vf, q_data), + q_type); + + /* sp indication is set only when vlan/mac/etc. are initialized */ + q->sp_initialized = false; + + DP(BNX2X_MSG_IOV, + "initialized vf %d's queue object. func id set to %d. cid set to 0x%x\n", + vf->abs_vfid, q->sp_obj.func_id, q->cid); +} + +static int bnx2x_max_speed_cap(struct bnx2x *bp) +{ + u32 supported = bp->port.supported[bnx2x_get_link_cfg_idx(bp)]; + + if (supported & + (SUPPORTED_20000baseMLD2_Full | SUPPORTED_20000baseKR2_Full)) + return 20000; + + return 10000; /* assume lowest supported speed is 10G */ +} + +int bnx2x_iov_link_update_vf(struct bnx2x *bp, int idx) +{ + struct bnx2x_link_report_data *state = &bp->last_reported_link; + struct pf_vf_bulletin_content *bulletin; + struct bnx2x_virtf *vf; + bool update = true; + int rc = 0; + + /* sanity and init */ + rc = bnx2x_vf_op_prep(bp, idx, &vf, &bulletin, false); + if (rc) + return rc; + + mutex_lock(&bp->vfdb->bulletin_mutex); + + if (vf->link_cfg == IFLA_VF_LINK_STATE_AUTO) { + bulletin->valid_bitmap |= 1 << LINK_VALID; + + bulletin->link_speed = state->line_speed; + bulletin->link_flags = 0; + if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &state->link_report_flags)) + bulletin->link_flags |= VFPF_LINK_REPORT_LINK_DOWN; + if (test_bit(BNX2X_LINK_REPORT_FD, + &state->link_report_flags)) + bulletin->link_flags |= VFPF_LINK_REPORT_FULL_DUPLEX; + if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON, + &state->link_report_flags)) + bulletin->link_flags |= VFPF_LINK_REPORT_RX_FC_ON; + if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON, + &state->link_report_flags)) + bulletin->link_flags |= VFPF_LINK_REPORT_TX_FC_ON; + } else if (vf->link_cfg == IFLA_VF_LINK_STATE_DISABLE && + !(bulletin->link_flags & VFPF_LINK_REPORT_LINK_DOWN)) { + bulletin->valid_bitmap |= 1 << LINK_VALID; + bulletin->link_flags |= VFPF_LINK_REPORT_LINK_DOWN; + } else if (vf->link_cfg == IFLA_VF_LINK_STATE_ENABLE && + (bulletin->link_flags & VFPF_LINK_REPORT_LINK_DOWN)) { + bulletin->valid_bitmap |= 1 << LINK_VALID; + bulletin->link_speed = bnx2x_max_speed_cap(bp); + bulletin->link_flags &= ~VFPF_LINK_REPORT_LINK_DOWN; + } else { + update = false; + } + + if (update) { + DP(NETIF_MSG_LINK | BNX2X_MSG_IOV, + "vf %d mode %u speed %d flags %x\n", idx, + vf->link_cfg, bulletin->link_speed, bulletin->link_flags); + + /* Post update on VF's bulletin board */ + rc = bnx2x_post_vf_bulletin(bp, idx); + if (rc) { + BNX2X_ERR("failed to update VF[%d] bulletin\n", idx); + goto out; + } + } + +out: + mutex_unlock(&bp->vfdb->bulletin_mutex); + return rc; +} + +int bnx2x_set_vf_link_state(struct net_device *dev, int idx, int link_state) +{ + struct bnx2x *bp = netdev_priv(dev); + struct bnx2x_virtf *vf = BP_VF(bp, idx); + + if (!vf) + return -EINVAL; + + if (vf->link_cfg == link_state) + return 0; /* nothing todo */ + + vf->link_cfg = link_state; + + return bnx2x_iov_link_update_vf(bp, idx); +} + +void bnx2x_iov_link_update(struct bnx2x *bp) +{ + int vfid; + + if (!IS_SRIOV(bp)) + return; + + for_each_vf(bp, vfid) + bnx2x_iov_link_update_vf(bp, vfid); +} + +/* called by bnx2x_nic_load */ +int bnx2x_iov_nic_init(struct bnx2x *bp) +{ + int vfid; + + if (!IS_SRIOV(bp)) { + DP(BNX2X_MSG_IOV, "vfdb was not allocated\n"); + return 0; + } + + DP(BNX2X_MSG_IOV, "num of vfs: %d\n", (bp)->vfdb->sriov.nr_virtfn); + + /* let FLR complete ... */ + msleep(100); + + /* initialize vf database */ + for_each_vf(bp, vfid) { + struct bnx2x_virtf *vf = BP_VF(bp, vfid); + + int base_vf_cid = (BP_VFDB(bp)->sriov.first_vf_in_pf + vfid) * + BNX2X_CIDS_PER_VF; + + union cdu_context *base_cxt = (union cdu_context *) + BP_VF_CXT_PAGE(bp, base_vf_cid/ILT_PAGE_CIDS)->addr + + (base_vf_cid & (ILT_PAGE_CIDS-1)); + + DP(BNX2X_MSG_IOV, + "VF[%d] Max IGU SBs: %d, base vf cid 0x%x, base cid 0x%x, base cxt %p\n", + vf->abs_vfid, vf_sb_count(vf), base_vf_cid, + BNX2X_FIRST_VF_CID + base_vf_cid, base_cxt); + + /* init statically provisioned resources */ + bnx2x_iov_static_resc(bp, vf); + + /* queues are initialized during VF-ACQUIRE */ + vf->filter_state = 0; + vf->sp_cl_id = bnx2x_fp(bp, 0, cl_id); + + bnx2x_init_credit_pool(&vf->vf_vlans_pool, 0, + vf_vlan_rules_cnt(vf)); + bnx2x_init_credit_pool(&vf->vf_macs_pool, 0, + vf_mac_rules_cnt(vf)); + + /* init mcast object - This object will be re-initialized + * during VF-ACQUIRE with the proper cl_id and cid. + * It needs to be initialized here so that it can be safely + * handled by a subsequent FLR flow. + */ + bnx2x_init_mcast_obj(bp, &vf->mcast_obj, 0xFF, + 0xFF, 0xFF, 0xFF, + bnx2x_vf_sp(bp, vf, mcast_rdata), + bnx2x_vf_sp_map(bp, vf, mcast_rdata), + BNX2X_FILTER_MCAST_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX); + + /* set the mailbox message addresses */ + BP_VF_MBX(bp, vfid)->msg = (struct bnx2x_vf_mbx_msg *) + (((u8 *)BP_VF_MBX_DMA(bp)->addr) + vfid * + MBX_MSG_ALIGNED_SIZE); + + BP_VF_MBX(bp, vfid)->msg_mapping = BP_VF_MBX_DMA(bp)->mapping + + vfid * MBX_MSG_ALIGNED_SIZE; + + /* Enable vf mailbox */ + bnx2x_vf_enable_mbx(bp, vf->abs_vfid); + } + + /* Final VF init */ + for_each_vf(bp, vfid) { + struct bnx2x_virtf *vf = BP_VF(bp, vfid); + + /* fill in the BDF and bars */ + vf->domain = bnx2x_vf_domain(bp, vfid); + vf->bus = bnx2x_vf_bus(bp, vfid); + vf->devfn = bnx2x_vf_devfn(bp, vfid); + bnx2x_vf_set_bars(bp, vf); + + DP(BNX2X_MSG_IOV, + "VF info[%d]: bus 0x%x, devfn 0x%x, bar0 [0x%x, %d], bar1 [0x%x, %d], bar2 [0x%x, %d]\n", + vf->abs_vfid, vf->bus, vf->devfn, + (unsigned)vf->bars[0].bar, vf->bars[0].size, + (unsigned)vf->bars[1].bar, vf->bars[1].size, + (unsigned)vf->bars[2].bar, vf->bars[2].size); + } + + return 0; +} + +/* called by bnx2x_chip_cleanup */ +int bnx2x_iov_chip_cleanup(struct bnx2x *bp) +{ + int i; + + if (!IS_SRIOV(bp)) + return 0; + + /* release all the VFs */ + for_each_vf(bp, i) + bnx2x_vf_release(bp, BP_VF(bp, i)); + + return 0; +} + +/* called by bnx2x_init_hw_func, returns the next ilt line */ +int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) +{ + int i; + struct bnx2x_ilt *ilt = BP_ILT(bp); + + if (!IS_SRIOV(bp)) + return line; + + /* set vfs ilt lines */ + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *hw_cxt = BP_VF_CXT_PAGE(bp, i); + + ilt->lines[line+i].page = hw_cxt->addr; + ilt->lines[line+i].page_mapping = hw_cxt->mapping; + ilt->lines[line+i].size = hw_cxt->size; /* doesn't matter */ + } + return line + i; +} + +static u8 bnx2x_iov_is_vf_cid(struct bnx2x *bp, u16 cid) +{ + return ((cid >= BNX2X_FIRST_VF_CID) && + ((cid - BNX2X_FIRST_VF_CID) < BNX2X_VF_CIDS)); +} + +static +void bnx2x_vf_handle_classification_eqe(struct bnx2x *bp, + struct bnx2x_vf_queue *vfq, + union event_ring_elem *elem) +{ + unsigned long ramrod_flags = 0; + int rc = 0; + u32 echo = le32_to_cpu(elem->message.data.eth_event.echo); + + /* Always push next commands out, don't wait here */ + set_bit(RAMROD_CONT, &ramrod_flags); + + switch (echo >> BNX2X_SWCID_SHIFT) { + case BNX2X_FILTER_MAC_PENDING: + rc = vfq->mac_obj.complete(bp, &vfq->mac_obj, elem, + &ramrod_flags); + break; + case BNX2X_FILTER_VLAN_PENDING: + rc = vfq->vlan_obj.complete(bp, &vfq->vlan_obj, elem, + &ramrod_flags); + break; + default: + BNX2X_ERR("Unsupported classification command: 0x%x\n", echo); + return; + } + if (rc < 0) + BNX2X_ERR("Failed to schedule new commands: %d\n", rc); + else if (rc > 0) + DP(BNX2X_MSG_IOV, "Scheduled next pending commands...\n"); +} + +static +void bnx2x_vf_handle_mcast_eqe(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + struct bnx2x_mcast_ramrod_params rparam = {NULL}; + int rc; + + rparam.mcast_obj = &vf->mcast_obj; + vf->mcast_obj.raw.clear_pending(&vf->mcast_obj.raw); + + /* If there are pending mcast commands - send them */ + if (vf->mcast_obj.check_pending(&vf->mcast_obj)) { + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + if (rc < 0) + BNX2X_ERR("Failed to send pending mcast commands: %d\n", + rc); + } +} + +static +void bnx2x_vf_handle_filters_eqe(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + smp_mb__before_atomic(); + clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state); + smp_mb__after_atomic(); +} + +static void bnx2x_vf_handle_rss_update_eqe(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + vf->rss_conf_obj.raw.clear_pending(&vf->rss_conf_obj.raw); +} + +int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem) +{ + struct bnx2x_virtf *vf; + int qidx = 0, abs_vfid; + u8 opcode; + u16 cid = 0xffff; + + if (!IS_SRIOV(bp)) + return 1; + + /* first get the cid - the only events we handle here are cfc-delete + * and set-mac completion + */ + opcode = elem->message.opcode; + + switch (opcode) { + case EVENT_RING_OPCODE_CFC_DEL: + cid = SW_CID(elem->message.data.cfc_del_event.cid); + DP(BNX2X_MSG_IOV, "checking cfc-del comp cid=%d\n", cid); + break; + case EVENT_RING_OPCODE_CLASSIFICATION_RULES: + case EVENT_RING_OPCODE_MULTICAST_RULES: + case EVENT_RING_OPCODE_FILTERS_RULES: + case EVENT_RING_OPCODE_RSS_UPDATE_RULES: + cid = SW_CID(elem->message.data.eth_event.echo); + DP(BNX2X_MSG_IOV, "checking filtering comp cid=%d\n", cid); + break; + case EVENT_RING_OPCODE_VF_FLR: + abs_vfid = elem->message.data.vf_flr_event.vf_id; + DP(BNX2X_MSG_IOV, "Got VF FLR notification abs_vfid=%d\n", + abs_vfid); + goto get_vf; + case EVENT_RING_OPCODE_MALICIOUS_VF: + abs_vfid = elem->message.data.malicious_vf_event.vf_id; + BNX2X_ERR("Got VF MALICIOUS notification abs_vfid=%d err_id=0x%x\n", + abs_vfid, + elem->message.data.malicious_vf_event.err_id); + goto get_vf; + default: + return 1; + } + + /* check if the cid is the VF range */ + if (!bnx2x_iov_is_vf_cid(bp, cid)) { + DP(BNX2X_MSG_IOV, "cid is outside vf range: %d\n", cid); + return 1; + } + + /* extract vf and rxq index from vf_cid - relies on the following: + * 1. vfid on cid reflects the true abs_vfid + * 2. The max number of VFs (per path) is 64 + */ + qidx = cid & ((1 << BNX2X_VF_CID_WND)-1); + abs_vfid = (cid >> BNX2X_VF_CID_WND) & (BNX2X_MAX_NUM_OF_VFS-1); +get_vf: + vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + + if (!vf) { + BNX2X_ERR("EQ completion for unknown VF, cid %d, abs_vfid %d\n", + cid, abs_vfid); + return 0; + } + + switch (opcode) { + case EVENT_RING_OPCODE_CFC_DEL: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] cfc delete ramrod\n", + vf->abs_vfid, qidx); + vfq_get(vf, qidx)->sp_obj.complete_cmd(bp, + &vfq_get(vf, + qidx)->sp_obj, + BNX2X_Q_CMD_CFC_DEL); + break; + case EVENT_RING_OPCODE_CLASSIFICATION_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] set mac/vlan ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_classification_eqe(bp, vfq_get(vf, qidx), elem); + break; + case EVENT_RING_OPCODE_MULTICAST_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] set mcast ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_mcast_eqe(bp, vf); + break; + case EVENT_RING_OPCODE_FILTERS_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] set rx-mode ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_filters_eqe(bp, vf); + break; + case EVENT_RING_OPCODE_RSS_UPDATE_RULES: + DP(BNX2X_MSG_IOV, "got VF [%d:%d] RSS update ramrod\n", + vf->abs_vfid, qidx); + bnx2x_vf_handle_rss_update_eqe(bp, vf); + /* fall through */ + case EVENT_RING_OPCODE_VF_FLR: + /* Do nothing for now */ + return 0; + case EVENT_RING_OPCODE_MALICIOUS_VF: + vf->malicious = true; + return 0; + } + + return 0; +} + +static struct bnx2x_virtf *bnx2x_vf_by_cid(struct bnx2x *bp, int vf_cid) +{ + /* extract the vf from vf_cid - relies on the following: + * 1. vfid on cid reflects the true abs_vfid + * 2. The max number of VFs (per path) is 64 + */ + int abs_vfid = (vf_cid >> BNX2X_VF_CID_WND) & (BNX2X_MAX_NUM_OF_VFS-1); + return bnx2x_vf_by_abs_fid(bp, abs_vfid); +} + +void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, + struct bnx2x_queue_sp_obj **q_obj) +{ + struct bnx2x_virtf *vf; + + if (!IS_SRIOV(bp)) + return; + + vf = bnx2x_vf_by_cid(bp, vf_cid); + + if (vf) { + /* extract queue index from vf_cid - relies on the following: + * 1. vfid on cid reflects the true abs_vfid + * 2. The max number of VFs (per path) is 64 + */ + int q_index = vf_cid & ((1 << BNX2X_VF_CID_WND)-1); + *q_obj = &bnx2x_vfq(vf, q_index, sp_obj); + } else { + BNX2X_ERR("No vf matching cid %d\n", vf_cid); + } +} + +void bnx2x_iov_adjust_stats_req(struct bnx2x *bp) +{ + int i; + int first_queue_query_index, num_queues_req; + dma_addr_t cur_data_offset; + struct stats_query_entry *cur_query_entry; + u8 stats_count = 0; + bool is_fcoe = false; + + if (!IS_SRIOV(bp)) + return; + + if (!NO_FCOE(bp)) + is_fcoe = true; + + /* fcoe adds one global request and one queue request */ + num_queues_req = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe; + first_queue_query_index = BNX2X_FIRST_QUEUE_QUERY_IDX - + (is_fcoe ? 0 : 1); + + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), + "BNX2X_NUM_ETH_QUEUES %d, is_fcoe %d, first_queue_query_index %d => determined the last non virtual statistics query index is %d. Will add queries on top of that\n", + BNX2X_NUM_ETH_QUEUES(bp), is_fcoe, first_queue_query_index, + first_queue_query_index + num_queues_req); + + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, queue_stats) + + num_queues_req * sizeof(struct per_queue_stats); + + cur_query_entry = &bp->fw_stats_req-> + query[first_queue_query_index + num_queues_req]; + + for_each_vf(bp, i) { + int j; + struct bnx2x_virtf *vf = BP_VF(bp, i); + + if (vf->state != VF_ENABLED) { + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), + "vf %d not enabled so no stats for it\n", + vf->abs_vfid); + continue; + } + + if (vf->malicious) { + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), + "vf %d malicious so no stats for it\n", + vf->abs_vfid); + continue; + } + + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), + "add addresses for vf %d\n", vf->abs_vfid); + for_each_vfq(vf, j) { + struct bnx2x_vf_queue *rxq = vfq_get(vf, j); + + dma_addr_t q_stats_addr = + vf->fw_stat_map + j * vf->stats_stride; + + /* collect stats fro active queues only */ + if (bnx2x_get_q_logical_state(bp, &rxq->sp_obj) == + BNX2X_Q_LOGICAL_STATE_STOPPED) + continue; + + /* create stats query entry for this queue */ + cur_query_entry->kind = STATS_TYPE_QUEUE; + cur_query_entry->index = vfq_stat_id(vf, rxq); + cur_query_entry->funcID = + cpu_to_le16(FW_VF_HANDLE(vf->abs_vfid)); + cur_query_entry->address.hi = + cpu_to_le32(U64_HI(q_stats_addr)); + cur_query_entry->address.lo = + cpu_to_le32(U64_LO(q_stats_addr)); + DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS), + "added address %x %x for vf %d queue %d client %d\n", + cur_query_entry->address.hi, + cur_query_entry->address.lo, + cur_query_entry->funcID, + j, cur_query_entry->index); + cur_query_entry++; + cur_data_offset += sizeof(struct per_queue_stats); + stats_count++; + + /* all stats are coalesced to the leading queue */ + if (vf->cfg_flags & VF_CFG_STATS_COALESCE) + break; + } + } + bp->fw_stats_req->hdr.cmd_num = bp->fw_stats_num + stats_count; +} + +/* VF API helpers */ +static void bnx2x_vf_qtbl_set_q(struct bnx2x *bp, u8 abs_vfid, u8 qid, + u8 enable) +{ + u32 reg = PXP_REG_HST_ZONE_PERMISSION_TABLE + qid * 4; + u32 val = enable ? (abs_vfid | (1 << 6)) : 0; + + REG_WR(bp, reg, val); +} + +static void bnx2x_vf_clr_qtbl(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int i; + + for_each_vfq(vf, i) + bnx2x_vf_qtbl_set_q(bp, vf->abs_vfid, + vfq_qzone_id(vf, vfq_get(vf, i)), false); +} + +static void bnx2x_vf_igu_disable(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + u32 val; + + /* clear the VF configuration - pretend */ + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf->abs_vfid)); + val = REG_RD(bp, IGU_REG_VF_CONFIGURATION); + val &= ~(IGU_VF_CONF_MSI_MSIX_EN | IGU_VF_CONF_SINGLE_ISR_EN | + IGU_VF_CONF_FUNC_EN | IGU_VF_CONF_PARENT_MASK); + REG_WR(bp, IGU_REG_VF_CONFIGURATION, val); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); +} + +u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + return min_t(u8, min_t(u8, vf_sb_count(vf), BNX2X_CIDS_PER_VF), + BNX2X_VF_MAX_QUEUES); +} + +static +int bnx2x_vf_chk_avail_resc(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vf_pf_resc_request *req_resc) +{ + u8 rxq_cnt = vf_rxq_count(vf) ? : bnx2x_vf_max_queue_cnt(bp, vf); + u8 txq_cnt = vf_txq_count(vf) ? : bnx2x_vf_max_queue_cnt(bp, vf); + + return ((req_resc->num_rxqs <= rxq_cnt) && + (req_resc->num_txqs <= txq_cnt) && + (req_resc->num_sbs <= vf_sb_count(vf)) && + (req_resc->num_mac_filters <= vf_mac_rules_cnt(vf)) && + (req_resc->num_vlan_filters <= vf_vlan_rules_cnt(vf))); +} + +/* CORE VF API */ +int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vf_pf_resc_request *resc) +{ + int base_vf_cid = (BP_VFDB(bp)->sriov.first_vf_in_pf + vf->index) * + BNX2X_CIDS_PER_VF; + + union cdu_context *base_cxt = (union cdu_context *) + BP_VF_CXT_PAGE(bp, base_vf_cid/ILT_PAGE_CIDS)->addr + + (base_vf_cid & (ILT_PAGE_CIDS-1)); + int i; + + /* if state is 'acquired' the VF was not released or FLR'd, in + * this case the returned resources match the acquired already + * acquired resources. Verify that the requested numbers do + * not exceed the already acquired numbers. + */ + if (vf->state == VF_ACQUIRED) { + DP(BNX2X_MSG_IOV, "VF[%d] Trying to re-acquire resources (VF was not released or FLR'd)\n", + vf->abs_vfid); + + if (!bnx2x_vf_chk_avail_resc(bp, vf, resc)) { + BNX2X_ERR("VF[%d] When re-acquiring resources, requested numbers must be <= then previously acquired numbers\n", + vf->abs_vfid); + return -EINVAL; + } + return 0; + } + + /* Otherwise vf state must be 'free' or 'reset' */ + if (vf->state != VF_FREE && vf->state != VF_RESET) { + BNX2X_ERR("VF[%d] Can not acquire a VF with state %d\n", + vf->abs_vfid, vf->state); + return -EINVAL; + } + + /* static allocation: + * the global maximum number are fixed per VF. Fail the request if + * requested number exceed these globals + */ + if (!bnx2x_vf_chk_avail_resc(bp, vf, resc)) { + DP(BNX2X_MSG_IOV, + "cannot fulfill vf resource request. Placing maximal available values in response\n"); + /* set the max resource in the vf */ + return -ENOMEM; + } + + /* Set resources counters - 0 request means max available */ + vf_sb_count(vf) = resc->num_sbs; + vf_rxq_count(vf) = resc->num_rxqs ? : bnx2x_vf_max_queue_cnt(bp, vf); + vf_txq_count(vf) = resc->num_txqs ? : bnx2x_vf_max_queue_cnt(bp, vf); + + DP(BNX2X_MSG_IOV, + "Fulfilling vf request: sb count %d, tx_count %d, rx_count %d, mac_rules_count %d, vlan_rules_count %d\n", + vf_sb_count(vf), vf_rxq_count(vf), + vf_txq_count(vf), vf_mac_rules_cnt(vf), + vf_vlan_rules_cnt(vf)); + + /* Initialize the queues */ + if (!vf->vfqs) { + DP(BNX2X_MSG_IOV, "vf->vfqs was not allocated\n"); + return -EINVAL; + } + + for_each_vfq(vf, i) { + struct bnx2x_vf_queue *q = vfq_get(vf, i); + + if (!q) { + BNX2X_ERR("q number %d was not allocated\n", i); + return -EINVAL; + } + + q->index = i; + q->cxt = &((base_cxt + i)->eth); + q->cid = BNX2X_FIRST_VF_CID + base_vf_cid + i; + + DP(BNX2X_MSG_IOV, "VFQ[%d:%d]: index %d, cid 0x%x, cxt %p\n", + vf->abs_vfid, i, q->index, q->cid, q->cxt); + + /* init SP objects */ + bnx2x_vfq_init(bp, vf, q); + } + vf->state = VF_ACQUIRED; + return 0; +} + +int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, dma_addr_t *sb_map) +{ + struct bnx2x_func_init_params func_init = {0}; + int i; + + /* the sb resources are initialized at this point, do the + * FW/HW initializations + */ + for_each_vf_sb(vf, i) + bnx2x_init_sb(bp, (dma_addr_t)sb_map[i], vf->abs_vfid, true, + vf_igu_sb(vf, i), vf_igu_sb(vf, i)); + + /* Sanity checks */ + if (vf->state != VF_ACQUIRED) { + DP(BNX2X_MSG_IOV, "VF[%d] is not in VF_ACQUIRED, but %d\n", + vf->abs_vfid, vf->state); + return -EINVAL; + } + + /* let FLR complete ... */ + msleep(100); + + /* FLR cleanup epilogue */ + if (bnx2x_vf_flr_clnup_epilog(bp, vf->abs_vfid)) + return -EBUSY; + + /* reset IGU VF statistics: MSIX */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + vf->abs_vfid * 4 , 0); + + /* function setup */ + func_init.pf_id = BP_FUNC(bp); + func_init.func_id = FW_VF_HANDLE(vf->abs_vfid); + bnx2x_func_init(bp, &func_init); + + /* Enable the vf */ + bnx2x_vf_enable_access(bp, vf->abs_vfid); + bnx2x_vf_enable_traffic(bp, vf); + + /* queue protection table */ + for_each_vfq(vf, i) + bnx2x_vf_qtbl_set_q(bp, vf->abs_vfid, + vfq_qzone_id(vf, vfq_get(vf, i)), true); + + vf->state = VF_ENABLED; + + /* update vf bulletin board */ + bnx2x_post_vf_bulletin(bp, vf->index); + + return 0; +} + +struct set_vf_state_cookie { + struct bnx2x_virtf *vf; + u8 state; +}; + +static void bnx2x_set_vf_state(void *cookie) +{ + struct set_vf_state_cookie *p = (struct set_vf_state_cookie *)cookie; + + p->vf->state = p->state; +} + +int bnx2x_vf_close(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int rc = 0, i; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + /* Close all queues */ + for (i = 0; i < vf_rxq_count(vf); i++) { + rc = bnx2x_vf_queue_teardown(bp, vf, i); + if (rc) + goto op_err; + } + + /* disable the interrupts */ + DP(BNX2X_MSG_IOV, "disabling igu\n"); + bnx2x_vf_igu_disable(bp, vf); + + /* disable the VF */ + DP(BNX2X_MSG_IOV, "clearing qtbl\n"); + bnx2x_vf_clr_qtbl(bp, vf); + + /* need to make sure there are no outstanding stats ramrods which may + * cause the device to access the VF's stats buffer which it will free + * as soon as we return from the close flow. + */ + { + struct set_vf_state_cookie cookie; + + cookie.vf = vf; + cookie.state = VF_ACQUIRED; + rc = bnx2x_stats_safe_exec(bp, bnx2x_set_vf_state, &cookie); + if (rc) + goto op_err; + } + + DP(BNX2X_MSG_IOV, "set state to acquired\n"); + + return 0; +op_err: + BNX2X_ERR("vf[%d] CLOSE error: rc %d\n", vf->abs_vfid, rc); + return rc; +} + +/* VF release can be called either: 1. The VF was acquired but + * not enabled 2. the vf was enabled or in the process of being + * enabled + */ +int bnx2x_vf_free(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int rc; + + DP(BNX2X_MSG_IOV, "VF[%d] STATE: %s\n", vf->abs_vfid, + vf->state == VF_FREE ? "Free" : + vf->state == VF_ACQUIRED ? "Acquired" : + vf->state == VF_ENABLED ? "Enabled" : + vf->state == VF_RESET ? "Reset" : + "Unknown"); + + switch (vf->state) { + case VF_ENABLED: + rc = bnx2x_vf_close(bp, vf); + if (rc) + goto op_err; + /* Fallthrough to release resources */ + case VF_ACQUIRED: + DP(BNX2X_MSG_IOV, "about to free resources\n"); + bnx2x_vf_free_resc(bp, vf); + break; + + case VF_FREE: + case VF_RESET: + default: + break; + } + return 0; +op_err: + BNX2X_ERR("VF[%d] RELEASE error: rc %d\n", vf->abs_vfid, rc); + return rc; +} + +int bnx2x_vf_rss_update(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_config_rss_params *rss) +{ + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + set_bit(RAMROD_COMP_WAIT, &rss->ramrod_flags); + return bnx2x_config_rss(bp, rss); +} + +int bnx2x_vf_tpa_update(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vfpf_tpa_tlv *tlv, + struct bnx2x_queue_update_tpa_params *params) +{ + aligned_u64 *sge_addr = tlv->tpa_client_info.sge_addr; + struct bnx2x_queue_state_params qstate; + int qid, rc = 0; + + DP(BNX2X_MSG_IOV, "vf[%d]\n", vf->abs_vfid); + + /* Set ramrod params */ + memset(&qstate, 0, sizeof(struct bnx2x_queue_state_params)); + memcpy(&qstate.params.update_tpa, params, + sizeof(struct bnx2x_queue_update_tpa_params)); + qstate.cmd = BNX2X_Q_CMD_UPDATE_TPA; + set_bit(RAMROD_COMP_WAIT, &qstate.ramrod_flags); + + for (qid = 0; qid < vf_rxq_count(vf); qid++) { + qstate.q_obj = &bnx2x_vfq(vf, qid, sp_obj); + qstate.params.update_tpa.sge_map = sge_addr[qid]; + DP(BNX2X_MSG_IOV, "sge_addr[%d:%d] %08x:%08x\n", + vf->abs_vfid, qid, U64_HI(sge_addr[qid]), + U64_LO(sge_addr[qid])); + rc = bnx2x_queue_state_change(bp, &qstate); + if (rc) { + BNX2X_ERR("Failed to configure sge_addr %08x:%08x for [%d:%d]\n", + U64_HI(sge_addr[qid]), U64_LO(sge_addr[qid]), + vf->abs_vfid, qid); + return rc; + } + } + + return rc; +} + +/* VF release ~ VF close + VF release-resources + * Release is the ultimate SW shutdown and is called whenever an + * irrecoverable error is encountered. + */ +int bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int rc; + + DP(BNX2X_MSG_IOV, "PF releasing vf %d\n", vf->abs_vfid); + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF); + + rc = bnx2x_vf_free(bp, vf); + if (rc) + WARN(rc, + "VF[%d] Failed to allocate resources for release op- rc=%d\n", + vf->abs_vfid, rc); + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_RELEASE_VF); + return rc; +} + +void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs tlv) +{ + /* we don't lock the channel for unsupported tlvs */ + if (!bnx2x_tlv_supported(tlv)) { + BNX2X_ERR("attempting to lock with unsupported tlv. Aborting\n"); + return; + } + + /* lock the channel */ + mutex_lock(&vf->op_mutex); + + /* record the locking op */ + vf->op_current = tlv; + + /* log the lock */ + DP(BNX2X_MSG_IOV, "VF[%d]: vf pf channel locked by %d\n", + vf->abs_vfid, tlv); +} + +void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs expected_tlv) +{ + enum channel_tlvs current_tlv; + + if (!vf) { + BNX2X_ERR("VF was %p\n", vf); + return; + } + + current_tlv = vf->op_current; + + /* we don't unlock the channel for unsupported tlvs */ + if (!bnx2x_tlv_supported(expected_tlv)) + return; + + WARN(expected_tlv != vf->op_current, + "lock mismatch: expected %d found %d", expected_tlv, + vf->op_current); + + /* record the locking op */ + vf->op_current = CHANNEL_TLV_NONE; + + /* lock the channel */ + mutex_unlock(&vf->op_mutex); + + /* log the unlock */ + DP(BNX2X_MSG_IOV, "VF[%d]: vf pf channel unlocked by %d\n", + vf->abs_vfid, current_tlv); +} + +static int bnx2x_set_pf_tx_switching(struct bnx2x *bp, bool enable) +{ + struct bnx2x_queue_state_params q_params; + u32 prev_flags; + int i, rc; + + /* Verify changes are needed and record current Tx switching state */ + prev_flags = bp->flags; + if (enable) + bp->flags |= TX_SWITCHING; + else + bp->flags &= ~TX_SWITCHING; + if (prev_flags == bp->flags) + return 0; + + /* Verify state enables the sending of queue ramrods */ + if ((bp->state != BNX2X_STATE_OPEN) || + (bnx2x_get_q_logical_state(bp, + &bnx2x_sp_obj(bp, &bp->fp[0]).q_obj) != + BNX2X_Q_LOGICAL_STATE_ACTIVE)) + return 0; + + /* send q. update ramrod to configure Tx switching */ + memset(&q_params, 0, sizeof(q_params)); + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + q_params.cmd = BNX2X_Q_CMD_UPDATE; + __set_bit(BNX2X_Q_UPDATE_TX_SWITCHING_CHNG, + &q_params.params.update.update_flags); + if (enable) + __set_bit(BNX2X_Q_UPDATE_TX_SWITCHING, + &q_params.params.update.update_flags); + else + __clear_bit(BNX2X_Q_UPDATE_TX_SWITCHING, + &q_params.params.update.update_flags); + + /* send the ramrod on all the queues of the PF */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int tx_idx; + + /* Set the appropriate Queue object */ + q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj; + + for (tx_idx = FIRST_TX_COS_INDEX; + tx_idx < fp->max_cos; tx_idx++) { + q_params.params.update.cid_index = tx_idx; + + /* Update the Queue state */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to configure Tx switching\n"); + return rc; + } + } + } + + DP(BNX2X_MSG_IOV, "%s Tx Switching\n", enable ? "Enabled" : "Disabled"); + return 0; +} + +int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs_param) +{ + struct bnx2x *bp = netdev_priv(pci_get_drvdata(dev)); + + if (!IS_SRIOV(bp)) { + BNX2X_ERR("failed to configure SR-IOV since vfdb was not allocated. Check dmesg for errors in probe stage\n"); + return -EINVAL; + } + + DP(BNX2X_MSG_IOV, "bnx2x_sriov_configure called with %d, BNX2X_NR_VIRTFN(bp) was %d\n", + num_vfs_param, BNX2X_NR_VIRTFN(bp)); + + /* HW channel is only operational when PF is up */ + if (bp->state != BNX2X_STATE_OPEN) { + BNX2X_ERR("VF num configuration via sysfs not supported while PF is down\n"); + return -EINVAL; + } + + /* we are always bound by the total_vfs in the configuration space */ + if (num_vfs_param > BNX2X_NR_VIRTFN(bp)) { + BNX2X_ERR("truncating requested number of VFs (%d) down to maximum allowed (%d)\n", + num_vfs_param, BNX2X_NR_VIRTFN(bp)); + num_vfs_param = BNX2X_NR_VIRTFN(bp); + } + + bp->requested_nr_virtfn = num_vfs_param; + if (num_vfs_param == 0) { + bnx2x_set_pf_tx_switching(bp, false); + bnx2x_disable_sriov(bp); + return 0; + } else { + return bnx2x_enable_sriov(bp); + } +} + +#define IGU_ENTRY_SIZE 4 + +int bnx2x_enable_sriov(struct bnx2x *bp) +{ + int rc = 0, req_vfs = bp->requested_nr_virtfn; + int vf_idx, sb_idx, vfq_idx, qcount, first_vf; + u32 igu_entry, address; + u16 num_vf_queues; + + if (req_vfs == 0) + return 0; + + first_vf = bp->vfdb->sriov.first_vf_in_pf; + + /* statically distribute vf sb pool between VFs */ + num_vf_queues = min_t(u16, BNX2X_VF_MAX_QUEUES, + BP_VFDB(bp)->vf_sbs_pool / req_vfs); + + /* zero previous values learned from igu cam */ + for (vf_idx = 0; vf_idx < req_vfs; vf_idx++) { + struct bnx2x_virtf *vf = BP_VF(bp, vf_idx); + + vf->sb_count = 0; + vf_sb_count(BP_VF(bp, vf_idx)) = 0; + } + bp->vfdb->vf_sbs_pool = 0; + + /* prepare IGU cam */ + sb_idx = BP_VFDB(bp)->first_vf_igu_entry; + address = IGU_REG_MAPPING_MEMORY + sb_idx * IGU_ENTRY_SIZE; + for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) { + for (vfq_idx = 0; vfq_idx < num_vf_queues; vfq_idx++) { + igu_entry = vf_idx << IGU_REG_MAPPING_MEMORY_FID_SHIFT | + vfq_idx << IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT | + IGU_REG_MAPPING_MEMORY_VALID; + DP(BNX2X_MSG_IOV, "assigning sb %d to vf %d\n", + sb_idx, vf_idx); + REG_WR(bp, address, igu_entry); + sb_idx++; + address += IGU_ENTRY_SIZE; + } + } + + /* Reinitialize vf database according to igu cam */ + bnx2x_get_vf_igu_cam_info(bp); + + DP(BNX2X_MSG_IOV, "vf_sbs_pool %d, num_vf_queues %d\n", + BP_VFDB(bp)->vf_sbs_pool, num_vf_queues); + + qcount = 0; + for_each_vf(bp, vf_idx) { + struct bnx2x_virtf *vf = BP_VF(bp, vf_idx); + + /* set local queue arrays */ + vf->vfqs = &bp->vfdb->vfqs[qcount]; + qcount += vf_sb_count(vf); + bnx2x_iov_static_resc(bp, vf); + } + + /* prepare msix vectors in VF configuration space - the value in the + * PCI configuration space should be the index of the last entry, + * namely one less than the actual size of the table + */ + for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) { + bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx)); + REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL, + num_vf_queues - 1); + DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n", + vf_idx, num_vf_queues - 1); + } + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + /* enable sriov. This will probe all the VFs, and consequentially cause + * the "acquire" messages to appear on the VF PF channel. + */ + DP(BNX2X_MSG_IOV, "about to call enable sriov\n"); + bnx2x_disable_sriov(bp); + + rc = bnx2x_set_pf_tx_switching(bp, true); + if (rc) + return rc; + + rc = pci_enable_sriov(bp->pdev, req_vfs); + if (rc) { + BNX2X_ERR("pci_enable_sriov failed with %d\n", rc); + return rc; + } + DP(BNX2X_MSG_IOV, "sriov enabled (%d vfs)\n", req_vfs); + return req_vfs; +} + +void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) +{ + int vfidx; + struct pf_vf_bulletin_content *bulletin; + + DP(BNX2X_MSG_IOV, "configuring vlan for VFs from sp-task\n"); + for_each_vf(bp, vfidx) { + bulletin = BP_VF_BULLETIN(bp, vfidx); + if (bulletin->valid_bitmap & (1 << VLAN_VALID)) + bnx2x_set_vf_vlan(bp->dev, vfidx, bulletin->vlan, 0, + htons(ETH_P_8021Q)); + } +} + +void bnx2x_disable_sriov(struct bnx2x *bp) +{ + if (pci_vfs_assigned(bp->pdev)) { + DP(BNX2X_MSG_IOV, + "Unloading driver while VFs are assigned - VFs will not be deallocated\n"); + return; + } + + pci_disable_sriov(bp->pdev); +} + +static int bnx2x_vf_op_prep(struct bnx2x *bp, int vfidx, + struct bnx2x_virtf **vf, + struct pf_vf_bulletin_content **bulletin, + bool test_queue) +{ + if (bp->state != BNX2X_STATE_OPEN) { + BNX2X_ERR("PF is down - can't utilize iov-related functionality\n"); + return -EINVAL; + } + + if (!IS_SRIOV(bp)) { + BNX2X_ERR("sriov is disabled - can't utilize iov-related functionality\n"); + return -EINVAL; + } + + if (vfidx >= BNX2X_NR_VIRTFN(bp)) { + BNX2X_ERR("VF is uninitialized - can't utilize iov-related functionality. vfidx was %d BNX2X_NR_VIRTFN was %d\n", + vfidx, BNX2X_NR_VIRTFN(bp)); + return -EINVAL; + } + + /* init members */ + *vf = BP_VF(bp, vfidx); + *bulletin = BP_VF_BULLETIN(bp, vfidx); + + if (!*vf) { + BNX2X_ERR("Unable to get VF structure for vfidx %d\n", vfidx); + return -EINVAL; + } + + if (test_queue && !(*vf)->vfqs) { + BNX2X_ERR("vfqs struct is null. Was this invoked before dynamically enabling SR-IOV? vfidx was %d\n", + vfidx); + return -EINVAL; + } + + if (!*bulletin) { + BNX2X_ERR("Bulletin Board struct is null for vfidx %d\n", + vfidx); + return -EINVAL; + } + + return 0; +} + +int bnx2x_get_vf_config(struct net_device *dev, int vfidx, + struct ifla_vf_info *ivi) +{ + struct bnx2x *bp = netdev_priv(dev); + struct bnx2x_virtf *vf = NULL; + struct pf_vf_bulletin_content *bulletin = NULL; + struct bnx2x_vlan_mac_obj *mac_obj; + struct bnx2x_vlan_mac_obj *vlan_obj; + int rc; + + /* sanity and init */ + rc = bnx2x_vf_op_prep(bp, vfidx, &vf, &bulletin, true); + if (rc) + return rc; + + mac_obj = &bnx2x_leading_vfq(vf, mac_obj); + vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj); + if (!mac_obj || !vlan_obj) { + BNX2X_ERR("VF partially initialized\n"); + return -EINVAL; + } + + ivi->vf = vfidx; + ivi->qos = 0; + ivi->max_tx_rate = 10000; /* always 10G. TBA take from link struct */ + ivi->min_tx_rate = 0; + ivi->spoofchk = 1; /*always enabled */ + if (vf->state == VF_ENABLED) { + /* mac and vlan are in vlan_mac objects */ + if (bnx2x_validate_vf_sp_objs(bp, vf, false)) { + mac_obj->get_n_elements(bp, mac_obj, 1, (u8 *)&ivi->mac, + 0, ETH_ALEN); + vlan_obj->get_n_elements(bp, vlan_obj, 1, + (u8 *)&ivi->vlan, 0, + VLAN_HLEN); + } + } else { + mutex_lock(&bp->vfdb->bulletin_mutex); + /* mac */ + if (bulletin->valid_bitmap & (1 << MAC_ADDR_VALID)) + /* mac configured by ndo so its in bulletin board */ + memcpy(&ivi->mac, bulletin->mac, ETH_ALEN); + else + /* function has not been loaded yet. Show mac as 0s */ + eth_zero_addr(ivi->mac); + + /* vlan */ + if (bulletin->valid_bitmap & (1 << VLAN_VALID)) + /* vlan configured by ndo so its in bulletin board */ + memcpy(&ivi->vlan, &bulletin->vlan, VLAN_HLEN); + else + /* function has not been loaded yet. Show vlans as 0s */ + memset(&ivi->vlan, 0, VLAN_HLEN); + + mutex_unlock(&bp->vfdb->bulletin_mutex); + } + + return 0; +} + +/* New mac for VF. Consider these cases: + * 1. VF hasn't been acquired yet - save the mac in local bulletin board and + * supply at acquire. + * 2. VF has already been acquired but has not yet initialized - store in local + * bulletin board. mac will be posted on VF bulletin board after VF init. VF + * will configure this mac when it is ready. + * 3. VF has already initialized but has not yet setup a queue - post the new + * mac on VF's bulletin board right now. VF will configure this mac when it + * is ready. + * 4. VF has already set a queue - delete any macs already configured for this + * queue and manually config the new mac. + * In any event, once this function has been called refuse any attempts by the + * VF to configure any mac for itself except for this mac. In case of a race + * where the VF fails to see the new post on its bulletin board before sending a + * mac configuration request, the PF will simply fail the request and VF can try + * again after consulting its bulletin board. + */ +int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc, q_logical_state; + struct bnx2x_virtf *vf = NULL; + struct pf_vf_bulletin_content *bulletin = NULL; + + if (!is_valid_ether_addr(mac)) { + BNX2X_ERR("mac address invalid\n"); + return -EINVAL; + } + + /* sanity and init */ + rc = bnx2x_vf_op_prep(bp, vfidx, &vf, &bulletin, true); + if (rc) + return rc; + + mutex_lock(&bp->vfdb->bulletin_mutex); + + /* update PF's copy of the VF's bulletin. Will no longer accept mac + * configuration requests from vf unless match this mac + */ + bulletin->valid_bitmap |= 1 << MAC_ADDR_VALID; + memcpy(bulletin->mac, mac, ETH_ALEN); + + /* Post update on VF's bulletin board */ + rc = bnx2x_post_vf_bulletin(bp, vfidx); + + /* release lock before checking return code */ + mutex_unlock(&bp->vfdb->bulletin_mutex); + + if (rc) { + BNX2X_ERR("failed to update VF[%d] bulletin\n", vfidx); + return rc; + } + + q_logical_state = + bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)); + if (vf->state == VF_ENABLED && + q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) { + /* configure the mac in device on this vf's queue */ + unsigned long ramrod_flags = 0; + struct bnx2x_vlan_mac_obj *mac_obj; + + /* User should be able to see failure reason in system logs */ + if (!bnx2x_validate_vf_sp_objs(bp, vf, true)) + return -EINVAL; + + /* must lock vfpf channel to protect against vf flows */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); + + /* remove existing eth macs */ + mac_obj = &bnx2x_leading_vfq(vf, mac_obj); + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true); + if (rc) { + BNX2X_ERR("failed to delete eth macs\n"); + rc = -EINVAL; + goto out; + } + + /* remove existing uc list macs */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true); + if (rc) { + BNX2X_ERR("failed to delete uc_list macs\n"); + rc = -EINVAL; + goto out; + } + + /* configure the new mac to device */ + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true, + BNX2X_ETH_MAC, &ramrod_flags); + +out: + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); + } + + return rc; +} + +static void bnx2x_set_vf_vlan_acceptance(struct bnx2x *bp, + struct bnx2x_virtf *vf, bool accept) +{ + struct bnx2x_rx_mode_ramrod_params rx_ramrod; + unsigned long accept_flags; + + /* need to remove/add the VF's accept_any_vlan bit */ + accept_flags = bnx2x_leading_vfq(vf, accept_flags); + if (accept) + set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + else + clear_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + + bnx2x_vf_prep_rx_mode(bp, LEADING_IDX, &rx_ramrod, vf, + accept_flags); + bnx2x_leading_vfq(vf, accept_flags) = accept_flags; + bnx2x_config_rx_mode(bp, &rx_ramrod); +} + +static int bnx2x_set_vf_vlan_filter(struct bnx2x *bp, struct bnx2x_virtf *vf, + u16 vlan, bool add) +{ + struct bnx2x_vlan_mac_ramrod_params ramrod_param; + unsigned long ramrod_flags = 0; + int rc = 0; + + /* configure the new vlan to device */ + memset(&ramrod_param, 0, sizeof(ramrod_param)); + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + ramrod_param.vlan_mac_obj = &bnx2x_leading_vfq(vf, vlan_obj); + ramrod_param.ramrod_flags = ramrod_flags; + ramrod_param.user_req.u.vlan.vlan = vlan; + ramrod_param.user_req.cmd = add ? BNX2X_VLAN_MAC_ADD + : BNX2X_VLAN_MAC_DEL; + rc = bnx2x_config_vlan_mac(bp, &ramrod_param); + if (rc) { + BNX2X_ERR("failed to configure vlan\n"); + return -EINVAL; + } + + return 0; +} + +int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos, + __be16 vlan_proto) +{ + struct pf_vf_bulletin_content *bulletin = NULL; + struct bnx2x *bp = netdev_priv(dev); + struct bnx2x_vlan_mac_obj *vlan_obj; + unsigned long vlan_mac_flags = 0; + unsigned long ramrod_flags = 0; + struct bnx2x_virtf *vf = NULL; + int i, rc; + + if (vlan > 4095) { + BNX2X_ERR("illegal vlan value %d\n", vlan); + return -EINVAL; + } + + if (vlan_proto != htons(ETH_P_8021Q)) + return -EPROTONOSUPPORT; + + DP(BNX2X_MSG_IOV, "configuring VF %d with VLAN %d qos %d\n", + vfidx, vlan, 0); + + /* sanity and init */ + rc = bnx2x_vf_op_prep(bp, vfidx, &vf, &bulletin, true); + if (rc) + return rc; + + /* update PF's copy of the VF's bulletin. No point in posting the vlan + * to the VF since it doesn't have anything to do with it. But it useful + * to store it here in case the VF is not up yet and we can only + * configure the vlan later when it does. Treat vlan id 0 as remove the + * Host tag. + */ + mutex_lock(&bp->vfdb->bulletin_mutex); + + if (vlan > 0) + bulletin->valid_bitmap |= 1 << VLAN_VALID; + else + bulletin->valid_bitmap &= ~(1 << VLAN_VALID); + bulletin->vlan = vlan; + + /* Post update on VF's bulletin board */ + rc = bnx2x_post_vf_bulletin(bp, vfidx); + if (rc) + BNX2X_ERR("failed to update VF[%d] bulletin\n", vfidx); + mutex_unlock(&bp->vfdb->bulletin_mutex); + + /* is vf initialized and queue set up? */ + if (vf->state != VF_ENABLED || + bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)) != + BNX2X_Q_LOGICAL_STATE_ACTIVE) + return rc; + + /* User should be able to see error in system logs */ + if (!bnx2x_validate_vf_sp_objs(bp, vf, true)) + return -EINVAL; + + /* must lock vfpf channel to protect against vf flows */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); + + /* remove existing vlans */ + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj); + rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags, + &ramrod_flags); + if (rc) { + BNX2X_ERR("failed to delete vlans\n"); + rc = -EINVAL; + goto out; + } + + /* clear accept_any_vlan when HV forces vlan, otherwise + * according to VF capabilities + */ + if (vlan || !(vf->cfg_flags & VF_CFG_VLAN_FILTER)) + bnx2x_set_vf_vlan_acceptance(bp, vf, !vlan); + + rc = bnx2x_set_vf_vlan_filter(bp, vf, vlan, true); + if (rc) + goto out; + + /* send queue update ramrods to configure default vlan and + * silent vlan removal + */ + for_each_vfq(vf, i) { + struct bnx2x_queue_state_params q_params = {NULL}; + struct bnx2x_queue_update_params *update_params; + + q_params.q_obj = &bnx2x_vfq(vf, i, sp_obj); + + /* validate the Q is UP */ + if (bnx2x_get_q_logical_state(bp, q_params.q_obj) != + BNX2X_Q_LOGICAL_STATE_ACTIVE) + continue; + + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + q_params.cmd = BNX2X_Q_CMD_UPDATE; + update_params = &q_params.params.update; + __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, + &update_params->update_flags); + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + &update_params->update_flags); + if (vlan == 0) { + /* if vlan is 0 then we want to leave the VF traffic + * untagged, and leave the incoming traffic untouched + * (i.e. do not remove any vlan tags). + */ + __clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, + &update_params->update_flags); + __clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, + &update_params->update_flags); + } else { + /* configure default vlan to vf queue and set silent + * vlan removal (the vf remains unaware of this vlan). + */ + __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, + &update_params->update_flags); + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, + &update_params->update_flags); + update_params->def_vlan = vlan; + update_params->silent_removal_value = + vlan & VLAN_VID_MASK; + update_params->silent_removal_mask = VLAN_VID_MASK; + } + + /* Update the Queue state */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to configure default VLAN queue %d\n", + i); + goto out; + } + } +out: + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); + + if (rc) + DP(BNX2X_MSG_IOV, + "updated VF[%d] vlan configuration (vlan = %d)\n", + vfidx, vlan); + + return rc; +} + +/* crc is the first field in the bulletin board. Compute the crc over the + * entire bulletin board excluding the crc field itself. Use the length field + * as the Bulletin Board was posted by a PF with possibly a different version + * from the vf which will sample it. Therefore, the length is computed by the + * PF and then used blindly by the VF. + */ +u32 bnx2x_crc_vf_bulletin(struct pf_vf_bulletin_content *bulletin) +{ + return crc32(BULLETIN_CRC_SEED, + ((u8 *)bulletin) + sizeof(bulletin->crc), + bulletin->length - sizeof(bulletin->crc)); +} + +/* Check for new posts on the bulletin board */ +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp) +{ + struct pf_vf_bulletin_content *bulletin; + int attempts; + + /* sampling structure in mid post may result with corrupted data + * validate crc to ensure coherency. + */ + for (attempts = 0; attempts < BULLETIN_ATTEMPTS; attempts++) { + u32 crc; + + /* sample the bulletin board */ + memcpy(&bp->shadow_bulletin, bp->pf2vf_bulletin, + sizeof(union pf_vf_bulletin)); + + crc = bnx2x_crc_vf_bulletin(&bp->shadow_bulletin.content); + + if (bp->shadow_bulletin.content.crc == crc) + break; + + BNX2X_ERR("bad crc on bulletin board. Contained %x computed %x\n", + bp->shadow_bulletin.content.crc, crc); + } + + if (attempts >= BULLETIN_ATTEMPTS) { + BNX2X_ERR("pf to vf bulletin board crc was wrong %d consecutive times. Aborting\n", + attempts); + return PFVF_BULLETIN_CRC_ERR; + } + bulletin = &bp->shadow_bulletin.content; + + /* bulletin board hasn't changed since last sample */ + if (bp->old_bulletin.version == bulletin->version) + return PFVF_BULLETIN_UNCHANGED; + + /* the mac address in bulletin board is valid and is new */ + if (bulletin->valid_bitmap & 1 << MAC_ADDR_VALID && + !ether_addr_equal(bulletin->mac, bp->old_bulletin.mac)) { + /* update new mac to net device */ + memcpy(bp->dev->dev_addr, bulletin->mac, ETH_ALEN); + } + + if (bulletin->valid_bitmap & (1 << LINK_VALID)) { + DP(BNX2X_MSG_IOV, "link update speed %d flags %x\n", + bulletin->link_speed, bulletin->link_flags); + + bp->vf_link_vars.line_speed = bulletin->link_speed; + bp->vf_link_vars.link_report_flags = 0; + /* Link is down */ + if (bulletin->link_flags & VFPF_LINK_REPORT_LINK_DOWN) + __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &bp->vf_link_vars.link_report_flags); + /* Full DUPLEX */ + if (bulletin->link_flags & VFPF_LINK_REPORT_FULL_DUPLEX) + __set_bit(BNX2X_LINK_REPORT_FD, + &bp->vf_link_vars.link_report_flags); + /* Rx Flow Control is ON */ + if (bulletin->link_flags & VFPF_LINK_REPORT_RX_FC_ON) + __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, + &bp->vf_link_vars.link_report_flags); + /* Tx Flow Control is ON */ + if (bulletin->link_flags & VFPF_LINK_REPORT_TX_FC_ON) + __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, + &bp->vf_link_vars.link_report_flags); + __bnx2x_link_report(bp); + } + + /* copy new bulletin board to bp */ + memcpy(&bp->old_bulletin, bulletin, + sizeof(struct pf_vf_bulletin_content)); + + return PFVF_BULLETIN_UPDATED; +} + +void bnx2x_timer_sriov(struct bnx2x *bp) +{ + bnx2x_sample_bulletin(bp); + + /* if channel is down we need to self destruct */ + if (bp->old_bulletin.valid_bitmap & 1 << CHANNEL_DOWN) + bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, + BNX2X_MSG_IOV); +} + +void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp) +{ + /* vf doorbells are embedded within the regview */ + return bp->regview + PXP_VF_ADDR_DB_START; +} + +void bnx2x_vf_pci_dealloc(struct bnx2x *bp) +{ + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + BNX2X_PCI_FREE(bp->pf2vf_bulletin, bp->pf2vf_bulletin_mapping, + sizeof(union pf_vf_bulletin)); +} + +int bnx2x_vf_pci_alloc(struct bnx2x *bp) +{ + mutex_init(&bp->vf2pf_mutex); + + /* allocate vf2pf mailbox for vf to pf channel */ + bp->vf2pf_mbox = BNX2X_PCI_ALLOC(&bp->vf2pf_mbox_mapping, + sizeof(struct bnx2x_vf_mbx_msg)); + if (!bp->vf2pf_mbox) + goto alloc_mem_err; + + /* allocate pf 2 vf bulletin board */ + bp->pf2vf_bulletin = BNX2X_PCI_ALLOC(&bp->pf2vf_bulletin_mapping, + sizeof(union pf_vf_bulletin)); + if (!bp->pf2vf_bulletin) + goto alloc_mem_err; + + bnx2x_vf_bulletin_finalize(&bp->pf2vf_bulletin->content, true); + + return 0; + +alloc_mem_err: + bnx2x_vf_pci_dealloc(bp); + return -ENOMEM; +} + +void bnx2x_iov_channel_down(struct bnx2x *bp) +{ + int vf_idx; + struct pf_vf_bulletin_content *bulletin; + + if (!IS_SRIOV(bp)) + return; + + for_each_vf(bp, vf_idx) { + /* locate this VFs bulletin board and update the channel down + * bit + */ + bulletin = BP_VF_BULLETIN(bp, vf_idx); + bulletin->valid_bitmap |= 1 << CHANNEL_DOWN; + + /* update vf bulletin board */ + bnx2x_post_vf_bulletin(bp, vf_idx); + } +} + +void bnx2x_iov_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, iov_task.work); + + if (!netif_running(bp->dev)) + return; + + if (test_and_clear_bit(BNX2X_IOV_HANDLE_FLR, + &bp->iov_task_state)) + bnx2x_vf_handle_flr_event(bp); + + if (test_and_clear_bit(BNX2X_IOV_HANDLE_VF_MSG, + &bp->iov_task_state)) + bnx2x_vf_mbx(bp); +} + +void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag) +{ + smp_mb__before_atomic(); + set_bit(flag, &bp->iov_task_state); + smp_mb__after_atomic(); + DP(BNX2X_MSG_IOV, "Scheduling iov task [Flag: %d]\n", flag); + queue_delayed_work(bnx2x_iov_wq, &bp->iov_task, 0); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h new file mode 100644 index 000000000..4dc34de1a --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -0,0 +1,631 @@ +/* bnx2x_sriov.h: QLogic Everest network driver. + * + * Copyright 2009-2013 Broadcom Corporation + * Copyright 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other QLogic software provided under a + * license other than the GPL, without QLogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Shmulik Ravid + * Ariel Elior <ariel.elior@qlogic.com> + */ +#ifndef BNX2X_SRIOV_H +#define BNX2X_SRIOV_H + +#include "bnx2x_vfpf.h" +#include "bnx2x.h" + +enum sample_bulletin_result { + PFVF_BULLETIN_UNCHANGED, + PFVF_BULLETIN_UPDATED, + PFVF_BULLETIN_CRC_ERR +}; + +#ifdef CONFIG_BNX2X_SRIOV + +extern struct workqueue_struct *bnx2x_iov_wq; + +/* The bnx2x device structure holds vfdb structure described below. + * The VF array is indexed by the relative vfid. + */ +#define BNX2X_VF_MAX_QUEUES 16 +#define BNX2X_VF_MAX_TPA_AGG_QUEUES 8 + +struct bnx2x_sriov { + u32 first_vf_in_pf; + + /* standard SRIOV capability fields, mostly for debugging */ + int pos; /* capability position */ + int nres; /* number of resources */ + u32 cap; /* SR-IOV Capabilities */ + u16 ctrl; /* SR-IOV Control */ + u16 total; /* total VFs associated with the PF */ + u16 initial; /* initial VFs associated with the PF */ + u16 nr_virtfn; /* number of VFs available */ + u16 offset; /* first VF Routing ID offset */ + u16 stride; /* following VF stride */ + u32 pgsz; /* page size for BAR alignment */ + u8 link; /* Function Dependency Link */ +}; + +/* bars */ +struct bnx2x_vf_bar { + u64 bar; + u32 size; +}; + +struct bnx2x_vf_bar_info { + struct bnx2x_vf_bar bars[PCI_SRIOV_NUM_BARS]; + u8 nr_bars; +}; + +/* vf queue (used both for rx or tx) */ +struct bnx2x_vf_queue { + struct eth_context *cxt; + + /* MACs object */ + struct bnx2x_vlan_mac_obj mac_obj; + + /* VLANs object */ + struct bnx2x_vlan_mac_obj vlan_obj; + + /* VLAN-MACs object */ + struct bnx2x_vlan_mac_obj vlan_mac_obj; + + unsigned long accept_flags; /* last accept flags configured */ + + /* Queue Slow-path State object */ + struct bnx2x_queue_sp_obj sp_obj; + + u32 cid; + u16 index; + u16 sb_idx; + bool is_leading; + bool sp_initialized; +}; + +/* struct bnx2x_vf_queue_construct_params - prepare queue construction + * parameters: q-init, q-setup and SB index + */ +struct bnx2x_vf_queue_construct_params { + struct bnx2x_queue_state_params qstate; + struct bnx2x_queue_setup_params prep_qsetup; +}; + +/* forward */ +struct bnx2x_virtf; + +/* VFOP definitions */ + +struct bnx2x_vf_mac_vlan_filter { + int type; +#define BNX2X_VF_FILTER_MAC BIT(0) +#define BNX2X_VF_FILTER_VLAN BIT(1) +#define BNX2X_VF_FILTER_VLAN_MAC \ + (BNX2X_VF_FILTER_MAC | BNX2X_VF_FILTER_VLAN) /*shortcut*/ + + bool add; + bool applied; + u8 *mac; + u16 vid; +}; + +struct bnx2x_vf_mac_vlan_filters { + int count; + struct bnx2x_vf_mac_vlan_filter filters[]; +}; + +/* vf context */ +struct bnx2x_virtf { + u16 cfg_flags; +#define VF_CFG_STATS_COALESCE 0x1 +#define VF_CFG_EXT_BULLETIN 0x2 +#define VF_CFG_VLAN_FILTER 0x4 + u8 link_cfg; /* IFLA_VF_LINK_STATE_AUTO + * IFLA_VF_LINK_STATE_ENABLE + * IFLA_VF_LINK_STATE_DISABLE + */ + u8 state; +#define VF_FREE 0 /* VF ready to be acquired holds no resc */ +#define VF_ACQUIRED 1 /* VF acquired, but not initialized */ +#define VF_ENABLED 2 /* VF Enabled */ +#define VF_RESET 3 /* VF FLR'd, pending cleanup */ +#define VF_LOST 4 /* Recovery while VFs are loaded */ + + bool flr_clnup_stage; /* true during flr cleanup */ + bool malicious; /* true if FW indicated so, until FLR */ + + /* dma */ + dma_addr_t fw_stat_map; + u16 stats_stride; + dma_addr_t bulletin_map; + + /* Allocated resources counters. Before the VF is acquired, the + * counters hold the following values: + * + * - xxq_count = 0 as the queues memory is not allocated yet. + * + * - sb_count = The number of status blocks configured for this VF in + * the IGU CAM. Initially read during probe. + * + * - xx_rules_count = The number of rules statically and equally + * allocated for each VF, during PF load. + */ + struct vf_pf_resc_request alloc_resc; +#define vf_rxq_count(vf) ((vf)->alloc_resc.num_rxqs) +#define vf_txq_count(vf) ((vf)->alloc_resc.num_txqs) +#define vf_sb_count(vf) ((vf)->alloc_resc.num_sbs) +#define vf_mac_rules_cnt(vf) ((vf)->alloc_resc.num_mac_filters) +#define vf_vlan_rules_cnt(vf) ((vf)->alloc_resc.num_vlan_filters) +#define vf_mc_rules_cnt(vf) ((vf)->alloc_resc.num_mc_filters) + + u8 sb_count; /* actual number of SBs */ + u8 igu_base_id; /* base igu status block id */ + + struct bnx2x_vf_queue *vfqs; +#define LEADING_IDX 0 +#define bnx2x_vfq_is_leading(vfq) ((vfq)->index == LEADING_IDX) +#define bnx2x_vfq(vf, nr, var) ((vf)->vfqs[(nr)].var) +#define bnx2x_leading_vfq(vf, var) ((vf)->vfqs[LEADING_IDX].var) + + u8 index; /* index in the vf array */ + u8 abs_vfid; + u8 sp_cl_id; + u32 error; /* 0 means all's-well */ + + /* BDF */ + unsigned int domain; + unsigned int bus; + unsigned int devfn; + + /* bars */ + struct bnx2x_vf_bar bars[PCI_SRIOV_NUM_BARS]; + + /* set-mac ramrod state 1-pending, 0-done */ + unsigned long filter_state; + + /* leading rss client id ~~ the client id of the first rxq, must be + * set for each txq. + */ + int leading_rss; + + /* MCAST object */ + struct bnx2x_mcast_obj mcast_obj; + + /* RSS configuration object */ + struct bnx2x_rss_config_obj rss_conf_obj; + + /* slow-path operations */ + struct mutex op_mutex; /* one vfop at a time mutex */ + enum channel_tlvs op_current; + + u8 fp_hsi; + + struct bnx2x_credit_pool_obj vf_vlans_pool; + struct bnx2x_credit_pool_obj vf_macs_pool; +}; + +#define BNX2X_NR_VIRTFN(bp) ((bp)->vfdb->sriov.nr_virtfn) + +#define for_each_vf(bp, var) \ + for ((var) = 0; (var) < BNX2X_NR_VIRTFN(bp); (var)++) + +#define for_each_vfq(vf, var) \ + for ((var) = 0; (var) < vf_rxq_count(vf); (var)++) + +#define for_each_vf_sb(vf, var) \ + for ((var) = 0; (var) < vf_sb_count(vf); (var)++) + +#define is_vf_multi(vf) (vf_rxq_count(vf) > 1) + +#define HW_VF_HANDLE(bp, abs_vfid) \ + (u16)(BP_ABS_FUNC((bp)) | (1<<3) | ((u16)(abs_vfid) << 4)) + +#define FW_PF_MAX_HANDLE 8 + +#define FW_VF_HANDLE(abs_vfid) \ + (abs_vfid + FW_PF_MAX_HANDLE) + +#define GET_NUM_VFS_PER_PATH(bp) 64 /* use max possible value */ +#define GET_NUM_VFS_PER_PF(bp) ((bp)->vfdb ? (bp)->vfdb->sriov.total \ + : 0) +#define VF_MAC_CREDIT_CNT 1 +#define VF_VLAN_CREDIT_CNT 2 /* VLAN0 + 'real' VLAN */ + +/* locking and unlocking the channel mutex */ +void bnx2x_lock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs tlv); + +void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf, + enum channel_tlvs expected_tlv); + +/* VF mail box (aka vf-pf channel) */ + +/* a container for the bi-directional vf<-->pf messages. + * The actual response will be placed according to the offset parameter + * provided in the request + */ + +#define MBX_MSG_ALIGN 8 +#define MBX_MSG_ALIGNED_SIZE (roundup(sizeof(struct bnx2x_vf_mbx_msg), \ + MBX_MSG_ALIGN)) + +struct bnx2x_vf_mbx_msg { + union vfpf_tlvs req; + union pfvf_tlvs resp; +}; + +struct bnx2x_vf_mbx { + struct bnx2x_vf_mbx_msg *msg; + dma_addr_t msg_mapping; + + /* VF GPA address */ + u32 vf_addr_lo; + u32 vf_addr_hi; + + struct vfpf_first_tlv first_tlv; /* saved VF request header */ +}; + +struct bnx2x_vf_sp { + union { + struct eth_classify_rules_ramrod_data e2; + } mac_rdata; + + union { + struct eth_classify_rules_ramrod_data e2; + } vlan_rdata; + + union { + struct eth_classify_rules_ramrod_data e2; + } vlan_mac_rdata; + + union { + struct eth_filter_rules_ramrod_data e2; + } rx_mode_rdata; + + union { + struct eth_multicast_rules_ramrod_data e2; + } mcast_rdata; + + union { + struct client_init_ramrod_data init_data; + struct client_update_ramrod_data update_data; + } q_data; + + union { + struct eth_rss_update_ramrod_data e2; + } rss_rdata; +}; + +struct hw_dma { + void *addr; + dma_addr_t mapping; + size_t size; +}; + +struct bnx2x_vfdb { +#define BP_VFDB(bp) ((bp)->vfdb) + /* vf array */ + struct bnx2x_virtf *vfs; +#define BP_VF(bp, idx) ((BP_VFDB(bp) && (bp)->vfdb->vfs) ? \ + &((bp)->vfdb->vfs[idx]) : NULL) +#define bnx2x_vf(bp, idx, var) ((bp)->vfdb->vfs[idx].var) + + /* queue array - for all vfs */ + struct bnx2x_vf_queue *vfqs; + + /* vf HW contexts */ + struct hw_dma context[BNX2X_VF_CIDS/ILT_PAGE_CIDS]; +#define BP_VF_CXT_PAGE(bp, i) (&(bp)->vfdb->context[i]) + + /* SR-IOV information */ + struct bnx2x_sriov sriov; + struct hw_dma mbx_dma; +#define BP_VF_MBX_DMA(bp) (&((bp)->vfdb->mbx_dma)) + struct bnx2x_vf_mbx mbxs[BNX2X_MAX_NUM_OF_VFS]; +#define BP_VF_MBX(bp, vfid) (&((bp)->vfdb->mbxs[vfid])) + + struct hw_dma bulletin_dma; +#define BP_VF_BULLETIN_DMA(bp) (&((bp)->vfdb->bulletin_dma)) +#define BP_VF_BULLETIN(bp, vf) \ + (((struct pf_vf_bulletin_content *)(BP_VF_BULLETIN_DMA(bp)->addr)) \ + + (vf)) + + struct hw_dma sp_dma; +#define bnx2x_vf_sp(bp, vf, field) ((bp)->vfdb->sp_dma.addr + \ + (vf)->index * sizeof(struct bnx2x_vf_sp) + \ + offsetof(struct bnx2x_vf_sp, field)) +#define bnx2x_vf_sp_map(bp, vf, field) ((bp)->vfdb->sp_dma.mapping + \ + (vf)->index * sizeof(struct bnx2x_vf_sp) + \ + offsetof(struct bnx2x_vf_sp, field)) + +#define FLRD_VFS_DWORDS (BNX2X_MAX_NUM_OF_VFS / 32) + u32 flrd_vfs[FLRD_VFS_DWORDS]; + + /* the number of msix vectors belonging to this PF designated for VFs */ + u16 vf_sbs_pool; + u16 first_vf_igu_entry; + + /* sp_rtnl synchronization */ + struct mutex event_mutex; + u64 event_occur; + + /* bulletin board update synchronization */ + struct mutex bulletin_mutex; +}; + +/* queue access */ +static inline struct bnx2x_vf_queue *vfq_get(struct bnx2x_virtf *vf, u8 index) +{ + return &(vf->vfqs[index]); +} + +/* FW ids */ +static inline u8 vf_igu_sb(struct bnx2x_virtf *vf, u16 sb_idx) +{ + return vf->igu_base_id + sb_idx; +} + +static inline u8 vf_hc_qzone(struct bnx2x_virtf *vf, u16 sb_idx) +{ + return vf_igu_sb(vf, sb_idx); +} + +static u8 vfq_cl_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) +{ + return vf->igu_base_id + q->index; +} + +static inline u8 vfq_stat_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) +{ + if (vf->cfg_flags & VF_CFG_STATS_COALESCE) + return vf->leading_rss; + else + return vfq_cl_id(vf, q); +} + +static inline u8 vfq_qzone_id(struct bnx2x_virtf *vf, struct bnx2x_vf_queue *q) +{ + return vfq_cl_id(vf, q); +} + +/* global iov routines */ +int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line); +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, int num_vfs_param); +void bnx2x_iov_remove_one(struct bnx2x *bp); +void bnx2x_iov_free_mem(struct bnx2x *bp); +int bnx2x_iov_alloc_mem(struct bnx2x *bp); +int bnx2x_iov_nic_init(struct bnx2x *bp); +int bnx2x_iov_chip_cleanup(struct bnx2x *bp); +void bnx2x_iov_init_dq(struct bnx2x *bp); +void bnx2x_iov_init_dmae(struct bnx2x *bp); +void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, + struct bnx2x_queue_sp_obj **q_obj); +int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem); +void bnx2x_iov_adjust_stats_req(struct bnx2x *bp); +void bnx2x_iov_storm_stats_update(struct bnx2x *bp); +/* global vf mailbox routines */ +void bnx2x_vf_mbx(struct bnx2x *bp); +void bnx2x_vf_mbx_schedule(struct bnx2x *bp, + struct vf_pf_event_data *vfpf_event); +void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid); + +/* CORE VF API */ +typedef u8 bnx2x_mac_addr_t[ETH_ALEN]; + +/* acquire */ +int bnx2x_vf_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vf_pf_resc_request *resc); +/* init */ +int bnx2x_vf_init(struct bnx2x *bp, struct bnx2x_virtf *vf, + dma_addr_t *sb_map); + +/* VFOP queue construction helpers */ +void bnx2x_vfop_qctor_dump_tx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx); + +void bnx2x_vfop_qctor_dump_rx(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_queue_init_params *init_params, + struct bnx2x_queue_setup_params *setup_params, + u16 q_idx, u16 sb_idx); + +void bnx2x_vfop_qctor_prep(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q, + struct bnx2x_vf_queue_construct_params *p, + unsigned long q_type); + +int bnx2x_vf_mac_vlan_config_list(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mac_vlan_filters *filters, + int qid, bool drv_only); + +int bnx2x_vf_queue_setup(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid, + struct bnx2x_vf_queue_construct_params *qctor); + +int bnx2x_vf_queue_teardown(struct bnx2x *bp, struct bnx2x_virtf *vf, int qid); + +int bnx2x_vf_mcast(struct bnx2x *bp, struct bnx2x_virtf *vf, + bnx2x_mac_addr_t *mcasts, int mc_num, bool drv_only); + +int bnx2x_vf_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf, + int qid, unsigned long accept_flags); + +int bnx2x_vf_close(struct bnx2x *bp, struct bnx2x_virtf *vf); + +int bnx2x_vf_free(struct bnx2x *bp, struct bnx2x_virtf *vf); + +int bnx2x_vf_rss_update(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_config_rss_params *rss); + +int bnx2x_vf_tpa_update(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct vfpf_tpa_tlv *tlv, + struct bnx2x_queue_update_tpa_params *params); + +/* VF release ~ VF close + VF release-resources + * + * Release is the ultimate SW shutdown and is called whenever an + * irrecoverable error is encountered. + */ +int bnx2x_vf_release(struct bnx2x *bp, struct bnx2x_virtf *vf); +int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); +u8 bnx2x_vf_max_queue_cnt(struct bnx2x *bp, struct bnx2x_virtf *vf); + +/* FLR routines */ + +/* VF FLR helpers */ +int bnx2x_vf_flr_clnup_epilog(struct bnx2x *bp, u8 abs_vfid); +void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid); + +/* Handles an FLR (or VF_DISABLE) notification form the MCP */ +void bnx2x_vf_handle_flr_event(struct bnx2x *bp); + +bool bnx2x_tlv_supported(u16 tlvtype); + +u32 bnx2x_crc_vf_bulletin(struct pf_vf_bulletin_content *bulletin); +int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf); +void bnx2x_vf_bulletin_finalize(struct pf_vf_bulletin_content *bulletin, + bool support_long); + +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); + +/* VF side vfpf channel functions */ +int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count); +int bnx2x_vfpf_release(struct bnx2x *bp); +int bnx2x_vfpf_release(struct bnx2x *bp); +int bnx2x_vfpf_init(struct bnx2x *bp); +void bnx2x_vfpf_close_vf(struct bnx2x *bp); +int bnx2x_vfpf_setup_q(struct bnx2x *bp, struct bnx2x_fastpath *fp, + bool is_leading); +int bnx2x_vfpf_config_mac(struct bnx2x *bp, u8 *addr, u8 vf_qid, bool set); +int bnx2x_vfpf_config_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *params); +int bnx2x_vfpf_set_mcast(struct net_device *dev); +int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp); + +static inline void bnx2x_vf_fill_fw_str(struct bnx2x *bp, char *buf, + size_t buf_len) +{ + strlcpy(buf, bp->acquire_resp.pfdev_info.fw_ver, buf_len); +} + +static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp, + struct bnx2x_fastpath *fp) +{ + return PXP_VF_ADDR_USDM_QUEUES_START + + bp->acquire_resp.resc.hw_qid[fp->index] * + sizeof(struct ustorm_queue_zone_data); +} + +enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp); +void bnx2x_timer_sriov(struct bnx2x *bp); +void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp); +void bnx2x_vf_pci_dealloc(struct bnx2x *bp); +int bnx2x_vf_pci_alloc(struct bnx2x *bp); +int bnx2x_enable_sriov(struct bnx2x *bp); +void bnx2x_disable_sriov(struct bnx2x *bp); +static inline int bnx2x_vf_headroom(struct bnx2x *bp) +{ + return bp->vfdb->sriov.nr_virtfn * BNX2X_CIDS_PER_VF; +} +void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp); +int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs); +void bnx2x_iov_channel_down(struct bnx2x *bp); + +void bnx2x_iov_task(struct work_struct *work); + +void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag); + +void bnx2x_iov_link_update(struct bnx2x *bp); +int bnx2x_iov_link_update_vf(struct bnx2x *bp, int idx); + +int bnx2x_set_vf_link_state(struct net_device *dev, int vf, int link_state); + +int bnx2x_vfpf_update_vlan(struct bnx2x *bp, u16 vid, u8 vf_qid, bool add); +#else /* CONFIG_BNX2X_SRIOV */ + +#define GET_NUM_VFS_PER_PATH(bp) 0 +#define GET_NUM_VFS_PER_PF(bp) 0 +#define VF_MAC_CREDIT_CNT 0 +#define VF_VLAN_CREDIT_CNT 0 + +static inline void bnx2x_iov_set_queue_sp_obj(struct bnx2x *bp, int vf_cid, + struct bnx2x_queue_sp_obj **q_obj) {} +static inline void bnx2x_vf_handle_flr_event(struct bnx2x *bp) {} +static inline int bnx2x_iov_eq_sp_event(struct bnx2x *bp, + union event_ring_elem *elem) {return 1; } +static inline void bnx2x_vf_mbx(struct bnx2x *bp) {} +static inline void bnx2x_vf_mbx_schedule(struct bnx2x *bp, + struct vf_pf_event_data *vfpf_event) {} +static inline int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) {return line; } +static inline void bnx2x_iov_init_dq(struct bnx2x *bp) {} +static inline int bnx2x_iov_alloc_mem(struct bnx2x *bp) {return 0; } +static inline void bnx2x_iov_free_mem(struct bnx2x *bp) {} +static inline int bnx2x_iov_chip_cleanup(struct bnx2x *bp) {return 0; } +static inline void bnx2x_iov_init_dmae(struct bnx2x *bp) {} +static inline int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, + int num_vfs_param) {return 0; } +static inline void bnx2x_iov_remove_one(struct bnx2x *bp) {} +static inline int bnx2x_enable_sriov(struct bnx2x *bp) {return 0; } +static inline void bnx2x_disable_sriov(struct bnx2x *bp) {} +static inline int bnx2x_vfpf_acquire(struct bnx2x *bp, + u8 tx_count, u8 rx_count) {return 0; } +static inline int bnx2x_vfpf_release(struct bnx2x *bp) {return 0; } +static inline int bnx2x_vfpf_init(struct bnx2x *bp) {return 0; } +static inline void bnx2x_vfpf_close_vf(struct bnx2x *bp) {} +static inline int bnx2x_vfpf_setup_q(struct bnx2x *bp, struct bnx2x_fastpath *fp, bool is_leading) {return 0; } +static inline int bnx2x_vfpf_config_mac(struct bnx2x *bp, u8 *addr, + u8 vf_qid, bool set) {return 0; } +static inline int bnx2x_vfpf_config_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *params) {return 0; } +static inline int bnx2x_vfpf_set_mcast(struct net_device *dev) {return 0; } +static inline int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp) {return 0; } +static inline int bnx2x_iov_nic_init(struct bnx2x *bp) {return 0; } +static inline int bnx2x_vf_headroom(struct bnx2x *bp) {return 0; } +static inline void bnx2x_iov_adjust_stats_req(struct bnx2x *bp) {} +static inline void bnx2x_vf_fill_fw_str(struct bnx2x *bp, char *buf, + size_t buf_len) {} +static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp, + struct bnx2x_fastpath *fp) {return 0; } +static inline enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp) +{ + return PFVF_BULLETIN_UNCHANGED; +} +static inline void bnx2x_timer_sriov(struct bnx2x *bp) {} + +static inline void __iomem *bnx2x_vf_doorbells(struct bnx2x *bp) +{ + return NULL; +} + +static inline void bnx2x_vf_pci_dealloc(struct bnx2x *bp) {} +static inline int bnx2x_vf_pci_alloc(struct bnx2x *bp) {return 0; } +static inline void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) {} +static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {return 0; } +static inline void bnx2x_iov_channel_down(struct bnx2x *bp) {} + +static inline void bnx2x_iov_task(struct work_struct *work) {} +static inline void bnx2x_schedule_iov_task(struct bnx2x *bp, enum bnx2x_iov_flag flag) {} +static inline void bnx2x_iov_link_update(struct bnx2x *bp) {} +static inline int bnx2x_iov_link_update_vf(struct bnx2x *bp, int idx) {return 0; } + +static inline int bnx2x_set_vf_link_state(struct net_device *dev, int vf, + int link_state) {return 0; } +struct pf_vf_bulletin_content; +static inline void bnx2x_vf_bulletin_finalize(struct pf_vf_bulletin_content *bulletin, + bool support_long) {} + +static inline int bnx2x_vfpf_update_vlan(struct bnx2x *bp, u16 vid, u8 vf_qid, bool add) {return 0; } + +#endif /* CONFIG_BNX2X_SRIOV */ +#endif /* bnx2x_sriov.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c new file mode 100644 index 000000000..7e0919aa4 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -0,0 +1,2004 @@ +/* bnx2x_stats.c: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "bnx2x_stats.h" +#include "bnx2x_cmn.h" +#include "bnx2x_sriov.h" + +/* Statistics */ + +/* + * General service functions + */ + +static inline long bnx2x_hilo(u32 *hiref) +{ + u32 lo = *(hiref + 1); +#if (BITS_PER_LONG == 64) + u32 hi = *hiref; + + return HILO_U64(hi, lo); +#else + return lo; +#endif +} + +static inline u16 bnx2x_get_port_stats_dma_len(struct bnx2x *bp) +{ + u16 res = 0; + + /* 'newest' convention - shmem2 cotains the size of the port stats */ + if (SHMEM2_HAS(bp, sizeof_port_stats)) { + u32 size = SHMEM2_RD(bp, sizeof_port_stats); + if (size) + res = size; + + /* prevent newer BC from causing buffer overflow */ + if (res > sizeof(struct host_port_stats)) + res = sizeof(struct host_port_stats); + } + + /* Older convention - all BCs support the port stats' fields up until + * the 'not_used' field + */ + if (!res) { + res = offsetof(struct host_port_stats, not_used) + 4; + + /* if PFC stats are supported by the MFW, DMA them as well */ + if (bp->flags & BC_SUPPORTS_PFC_STATS) { + res += offsetof(struct host_port_stats, + pfc_frames_rx_lo) - + offsetof(struct host_port_stats, + pfc_frames_tx_hi) + 4 ; + } + } + + res >>= 2; + + WARN_ON(res > 2 * DMAE_LEN32_RD_MAX); + return res; +} + +/* + * Init service functions + */ + +static void bnx2x_dp_stats(struct bnx2x *bp) +{ + int i; + + DP(BNX2X_MSG_STATS, "dumping stats:\n" + "fw_stats_req\n" + " hdr\n" + " cmd_num %d\n" + " reserved0 %d\n" + " drv_stats_counter %d\n" + " reserved1 %d\n" + " stats_counters_addrs %x %x\n", + bp->fw_stats_req->hdr.cmd_num, + bp->fw_stats_req->hdr.reserved0, + bp->fw_stats_req->hdr.drv_stats_counter, + bp->fw_stats_req->hdr.reserved1, + bp->fw_stats_req->hdr.stats_counters_addrs.hi, + bp->fw_stats_req->hdr.stats_counters_addrs.lo); + + for (i = 0; i < bp->fw_stats_req->hdr.cmd_num; i++) { + DP(BNX2X_MSG_STATS, + "query[%d]\n" + " kind %d\n" + " index %d\n" + " funcID %d\n" + " reserved %d\n" + " address %x %x\n", + i, bp->fw_stats_req->query[i].kind, + bp->fw_stats_req->query[i].index, + bp->fw_stats_req->query[i].funcID, + bp->fw_stats_req->query[i].reserved, + bp->fw_stats_req->query[i].address.hi, + bp->fw_stats_req->query[i].address.lo); + } +} + +/* Post the next statistics ramrod. Protect it with the spin in + * order to ensure the strict order between statistics ramrods + * (each ramrod has a sequence number passed in a + * bp->fw_stats_req->hdr.drv_stats_counter and ramrods must be + * sent in order). + */ +static void bnx2x_storm_stats_post(struct bnx2x *bp) +{ + int rc; + + if (bp->stats_pending) + return; + + bp->fw_stats_req->hdr.drv_stats_counter = + cpu_to_le16(bp->stats_counter++); + + DP(BNX2X_MSG_STATS, "Sending statistics ramrod %d\n", + le16_to_cpu(bp->fw_stats_req->hdr.drv_stats_counter)); + + /* adjust the ramrod to include VF queues statistics */ + bnx2x_iov_adjust_stats_req(bp); + bnx2x_dp_stats(bp); + + /* send FW stats ramrod */ + rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STAT_QUERY, 0, + U64_HI(bp->fw_stats_req_mapping), + U64_LO(bp->fw_stats_req_mapping), + NONE_CONNECTION_TYPE); + if (rc == 0) + bp->stats_pending = 1; +} + +static void bnx2x_hw_stats_post(struct bnx2x *bp) +{ + struct dmae_command *dmae = &bp->stats_dmae; + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + *stats_comp = DMAE_COMP_VAL; + if (CHIP_REV_IS_SLOW(bp)) + return; + + /* Update MCP's statistics if possible */ + if (bp->func_stx) + memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats, + sizeof(bp->func_stats)); + + /* loader */ + if (bp->executer_idx) { + int loader_idx = PMF_DMAE_C(bp); + u32 opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_PCI, DMAE_DST_GRC, + true, DMAE_COMP_GRC); + opcode = bnx2x_dmae_opcode_clr_src_reset(opcode); + + memset(dmae, 0, sizeof(struct dmae_command)); + dmae->opcode = opcode; + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, dmae[0])); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, dmae[0])); + dmae->dst_addr_lo = (DMAE_REG_CMD_MEM + + sizeof(struct dmae_command) * + (loader_idx + 1)) >> 2; + dmae->dst_addr_hi = 0; + dmae->len = sizeof(struct dmae_command) >> 2; + if (CHIP_IS_E1(bp)) + dmae->len--; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx + 1] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + + *stats_comp = 0; + bnx2x_post_dmae(bp, dmae, loader_idx); + + } else if (bp->func_stx) { + *stats_comp = 0; + bnx2x_issue_dmae_with_comp(bp, dmae, stats_comp); + } +} + +static void bnx2x_stats_comp(struct bnx2x *bp) +{ + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + int cnt = 10; + + might_sleep(); + while (*stats_comp != DMAE_COMP_VAL) { + if (!cnt) { + BNX2X_ERR("timeout waiting for stats finished\n"); + break; + } + cnt--; + usleep_range(1000, 2000); + } +} + +/* + * Statistics service functions + */ + +/* should be called under stats_sema */ +static void bnx2x_stats_pmf_update(struct bnx2x *bp) +{ + struct dmae_command *dmae; + u32 opcode; + int loader_idx = PMF_DMAE_C(bp); + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + /* sanity */ + if (!bp->port.pmf || !bp->port.port_stx) { + BNX2X_ERR("BUG!\n"); + return; + } + + bp->executer_idx = 0; + + opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_GRC, DMAE_DST_PCI, false, 0); + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = bnx2x_dmae_opcode_add_comp(opcode, DMAE_COMP_GRC); + dmae->src_addr_lo = bp->port.port_stx >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, port_stats)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, port_stats)); + dmae->len = DMAE_LEN32_RD_MAX; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = bnx2x_dmae_opcode_add_comp(opcode, DMAE_COMP_PCI); + dmae->src_addr_lo = (bp->port.port_stx >> 2) + DMAE_LEN32_RD_MAX; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, port_stats) + + DMAE_LEN32_RD_MAX * 4); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, port_stats) + + DMAE_LEN32_RD_MAX * 4); + dmae->len = bnx2x_get_port_stats_dma_len(bp) - DMAE_LEN32_RD_MAX; + + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_val = DMAE_COMP_VAL; + + *stats_comp = 0; + bnx2x_hw_stats_post(bp); + bnx2x_stats_comp(bp); +} + +static void bnx2x_port_stats_init(struct bnx2x *bp) +{ + struct dmae_command *dmae; + int port = BP_PORT(bp); + u32 opcode; + int loader_idx = PMF_DMAE_C(bp); + u32 mac_addr; + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + /* sanity */ + if (!bp->link_vars.link_up || !bp->port.pmf) { + BNX2X_ERR("BUG!\n"); + return; + } + + bp->executer_idx = 0; + + /* MCP */ + opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_PCI, DMAE_DST_GRC, + true, DMAE_COMP_GRC); + + if (bp->port.port_stx) { + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, port_stats)); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, port_stats)); + dmae->dst_addr_lo = bp->port.port_stx >> 2; + dmae->dst_addr_hi = 0; + dmae->len = bnx2x_get_port_stats_dma_len(bp); + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + } + + if (bp->func_stx) { + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, func_stats)); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, func_stats)); + dmae->dst_addr_lo = bp->func_stx >> 2; + dmae->dst_addr_hi = 0; + dmae->len = sizeof(struct host_func_stats) >> 2; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + } + + /* MAC */ + opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_GRC, DMAE_DST_PCI, + true, DMAE_COMP_GRC); + + /* EMAC is special */ + if (bp->link_vars.mac_type == MAC_TYPE_EMAC) { + mac_addr = (port ? GRCBASE_EMAC1 : GRCBASE_EMAC0); + + /* EMAC_REG_EMAC_RX_STAT_AC (EMAC_REG_EMAC_RX_STAT_AC_COUNT)*/ + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = (mac_addr + + EMAC_REG_EMAC_RX_STAT_AC) >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, mac_stats)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, mac_stats)); + dmae->len = EMAC_REG_EMAC_RX_STAT_AC_COUNT; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + + /* EMAC_REG_EMAC_RX_STAT_AC_28 */ + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = (mac_addr + + EMAC_REG_EMAC_RX_STAT_AC_28) >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, mac_stats) + + offsetof(struct emac_stats, rx_stat_falsecarriererrors)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, mac_stats) + + offsetof(struct emac_stats, rx_stat_falsecarriererrors)); + dmae->len = 1; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + + /* EMAC_REG_EMAC_TX_STAT_AC (EMAC_REG_EMAC_TX_STAT_AC_COUNT)*/ + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = (mac_addr + + EMAC_REG_EMAC_TX_STAT_AC) >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, mac_stats) + + offsetof(struct emac_stats, tx_stat_ifhcoutoctets)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, mac_stats) + + offsetof(struct emac_stats, tx_stat_ifhcoutoctets)); + dmae->len = EMAC_REG_EMAC_TX_STAT_AC_COUNT; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + } else { + u32 tx_src_addr_lo, rx_src_addr_lo; + u16 rx_len, tx_len; + + /* configure the params according to MAC type */ + switch (bp->link_vars.mac_type) { + case MAC_TYPE_BMAC: + mac_addr = (port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM); + + /* BIGMAC_REGISTER_TX_STAT_GTPKT .. + BIGMAC_REGISTER_TX_STAT_GTBYT */ + if (CHIP_IS_E1x(bp)) { + tx_src_addr_lo = (mac_addr + + BIGMAC_REGISTER_TX_STAT_GTPKT) >> 2; + tx_len = (8 + BIGMAC_REGISTER_TX_STAT_GTBYT - + BIGMAC_REGISTER_TX_STAT_GTPKT) >> 2; + rx_src_addr_lo = (mac_addr + + BIGMAC_REGISTER_RX_STAT_GR64) >> 2; + rx_len = (8 + BIGMAC_REGISTER_RX_STAT_GRIPJ - + BIGMAC_REGISTER_RX_STAT_GR64) >> 2; + } else { + tx_src_addr_lo = (mac_addr + + BIGMAC2_REGISTER_TX_STAT_GTPOK) >> 2; + tx_len = (8 + BIGMAC2_REGISTER_TX_STAT_GTBYT - + BIGMAC2_REGISTER_TX_STAT_GTPOK) >> 2; + rx_src_addr_lo = (mac_addr + + BIGMAC2_REGISTER_RX_STAT_GR64) >> 2; + rx_len = (8 + BIGMAC2_REGISTER_RX_STAT_GRIPJ - + BIGMAC2_REGISTER_RX_STAT_GR64) >> 2; + } + break; + + case MAC_TYPE_UMAC: /* handled by MSTAT */ + case MAC_TYPE_XMAC: /* handled by MSTAT */ + default: + mac_addr = port ? GRCBASE_MSTAT1 : GRCBASE_MSTAT0; + tx_src_addr_lo = (mac_addr + + MSTAT_REG_TX_STAT_GTXPOK_LO) >> 2; + rx_src_addr_lo = (mac_addr + + MSTAT_REG_RX_STAT_GR64_LO) >> 2; + tx_len = sizeof(bp->slowpath-> + mac_stats.mstat_stats.stats_tx) >> 2; + rx_len = sizeof(bp->slowpath-> + mac_stats.mstat_stats.stats_rx) >> 2; + break; + } + + /* TX stats */ + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = tx_src_addr_lo; + dmae->src_addr_hi = 0; + dmae->len = tx_len; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, mac_stats)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, mac_stats)); + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + + /* RX stats */ + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_hi = 0; + dmae->src_addr_lo = rx_src_addr_lo; + dmae->dst_addr_lo = + U64_LO(bnx2x_sp_mapping(bp, mac_stats) + (tx_len << 2)); + dmae->dst_addr_hi = + U64_HI(bnx2x_sp_mapping(bp, mac_stats) + (tx_len << 2)); + dmae->len = rx_len; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + } + + /* NIG */ + if (!CHIP_IS_E3(bp)) { + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = (port ? NIG_REG_STAT1_EGRESS_MAC_PKT0 : + NIG_REG_STAT0_EGRESS_MAC_PKT0) >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, nig_stats) + + offsetof(struct nig_stats, egress_mac_pkt0_lo)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, nig_stats) + + offsetof(struct nig_stats, egress_mac_pkt0_lo)); + dmae->len = (2*sizeof(u32)) >> 2; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = opcode; + dmae->src_addr_lo = (port ? NIG_REG_STAT1_EGRESS_MAC_PKT1 : + NIG_REG_STAT0_EGRESS_MAC_PKT1) >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, nig_stats) + + offsetof(struct nig_stats, egress_mac_pkt1_lo)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, nig_stats) + + offsetof(struct nig_stats, egress_mac_pkt1_lo)); + dmae->len = (2*sizeof(u32)) >> 2; + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + } + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_GRC, DMAE_DST_PCI, + true, DMAE_COMP_PCI); + dmae->src_addr_lo = (port ? NIG_REG_STAT1_BRB_DISCARD : + NIG_REG_STAT0_BRB_DISCARD) >> 2; + dmae->src_addr_hi = 0; + dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, nig_stats)); + dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, nig_stats)); + dmae->len = (sizeof(struct nig_stats) - 4*sizeof(u32)) >> 2; + + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_val = DMAE_COMP_VAL; + + *stats_comp = 0; +} + +static void bnx2x_func_stats_init(struct bnx2x *bp) +{ + struct dmae_command *dmae = &bp->stats_dmae; + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + /* sanity */ + if (!bp->func_stx) { + BNX2X_ERR("BUG!\n"); + return; + } + + bp->executer_idx = 0; + memset(dmae, 0, sizeof(struct dmae_command)); + + dmae->opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_PCI, DMAE_DST_GRC, + true, DMAE_COMP_PCI); + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, func_stats)); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, func_stats)); + dmae->dst_addr_lo = bp->func_stx >> 2; + dmae->dst_addr_hi = 0; + dmae->len = sizeof(struct host_func_stats) >> 2; + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_val = DMAE_COMP_VAL; + + *stats_comp = 0; +} + +/* should be called under stats_sema */ +static void bnx2x_stats_start(struct bnx2x *bp) +{ + if (IS_PF(bp)) { + if (bp->port.pmf) + bnx2x_port_stats_init(bp); + + else if (bp->func_stx) + bnx2x_func_stats_init(bp); + + bnx2x_hw_stats_post(bp); + bnx2x_storm_stats_post(bp); + } +} + +static void bnx2x_stats_pmf_start(struct bnx2x *bp) +{ + bnx2x_stats_comp(bp); + bnx2x_stats_pmf_update(bp); + bnx2x_stats_start(bp); +} + +static void bnx2x_stats_restart(struct bnx2x *bp) +{ + /* vfs travel through here as part of the statistics FSM, but no action + * is required + */ + if (IS_VF(bp)) + return; + + bnx2x_stats_comp(bp); + bnx2x_stats_start(bp); +} + +static void bnx2x_bmac_stats_update(struct bnx2x *bp) +{ + struct host_port_stats *pstats = bnx2x_sp(bp, port_stats); + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct { + u32 lo; + u32 hi; + } diff; + + if (CHIP_IS_E1x(bp)) { + struct bmac1_stats *new = bnx2x_sp(bp, mac_stats.bmac1_stats); + + /* the macros below will use "bmac1_stats" type */ + UPDATE_STAT64(rx_stat_grerb, rx_stat_ifhcinbadoctets); + UPDATE_STAT64(rx_stat_grfcs, rx_stat_dot3statsfcserrors); + UPDATE_STAT64(rx_stat_grund, rx_stat_etherstatsundersizepkts); + UPDATE_STAT64(rx_stat_grovr, rx_stat_dot3statsframestoolong); + UPDATE_STAT64(rx_stat_grfrg, rx_stat_etherstatsfragments); + UPDATE_STAT64(rx_stat_grjbr, rx_stat_etherstatsjabbers); + UPDATE_STAT64(rx_stat_grxcf, rx_stat_maccontrolframesreceived); + UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffstateentered); + UPDATE_STAT64(rx_stat_grxpf, rx_stat_mac_xpf); + + UPDATE_STAT64(tx_stat_gtxpf, tx_stat_outxoffsent); + UPDATE_STAT64(tx_stat_gtxpf, tx_stat_flowcontroldone); + UPDATE_STAT64(tx_stat_gt64, tx_stat_etherstatspkts64octets); + UPDATE_STAT64(tx_stat_gt127, + tx_stat_etherstatspkts65octetsto127octets); + UPDATE_STAT64(tx_stat_gt255, + tx_stat_etherstatspkts128octetsto255octets); + UPDATE_STAT64(tx_stat_gt511, + tx_stat_etherstatspkts256octetsto511octets); + UPDATE_STAT64(tx_stat_gt1023, + tx_stat_etherstatspkts512octetsto1023octets); + UPDATE_STAT64(tx_stat_gt1518, + tx_stat_etherstatspkts1024octetsto1522octets); + UPDATE_STAT64(tx_stat_gt2047, tx_stat_mac_2047); + UPDATE_STAT64(tx_stat_gt4095, tx_stat_mac_4095); + UPDATE_STAT64(tx_stat_gt9216, tx_stat_mac_9216); + UPDATE_STAT64(tx_stat_gt16383, tx_stat_mac_16383); + UPDATE_STAT64(tx_stat_gterr, + tx_stat_dot3statsinternalmactransmiterrors); + UPDATE_STAT64(tx_stat_gtufl, tx_stat_mac_ufl); + + } else { + struct bmac2_stats *new = bnx2x_sp(bp, mac_stats.bmac2_stats); + + /* the macros below will use "bmac2_stats" type */ + UPDATE_STAT64(rx_stat_grerb, rx_stat_ifhcinbadoctets); + UPDATE_STAT64(rx_stat_grfcs, rx_stat_dot3statsfcserrors); + UPDATE_STAT64(rx_stat_grund, rx_stat_etherstatsundersizepkts); + UPDATE_STAT64(rx_stat_grovr, rx_stat_dot3statsframestoolong); + UPDATE_STAT64(rx_stat_grfrg, rx_stat_etherstatsfragments); + UPDATE_STAT64(rx_stat_grjbr, rx_stat_etherstatsjabbers); + UPDATE_STAT64(rx_stat_grxcf, rx_stat_maccontrolframesreceived); + UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffstateentered); + UPDATE_STAT64(rx_stat_grxpf, rx_stat_mac_xpf); + UPDATE_STAT64(tx_stat_gtxpf, tx_stat_outxoffsent); + UPDATE_STAT64(tx_stat_gtxpf, tx_stat_flowcontroldone); + UPDATE_STAT64(tx_stat_gt64, tx_stat_etherstatspkts64octets); + UPDATE_STAT64(tx_stat_gt127, + tx_stat_etherstatspkts65octetsto127octets); + UPDATE_STAT64(tx_stat_gt255, + tx_stat_etherstatspkts128octetsto255octets); + UPDATE_STAT64(tx_stat_gt511, + tx_stat_etherstatspkts256octetsto511octets); + UPDATE_STAT64(tx_stat_gt1023, + tx_stat_etherstatspkts512octetsto1023octets); + UPDATE_STAT64(tx_stat_gt1518, + tx_stat_etherstatspkts1024octetsto1522octets); + UPDATE_STAT64(tx_stat_gt2047, tx_stat_mac_2047); + UPDATE_STAT64(tx_stat_gt4095, tx_stat_mac_4095); + UPDATE_STAT64(tx_stat_gt9216, tx_stat_mac_9216); + UPDATE_STAT64(tx_stat_gt16383, tx_stat_mac_16383); + UPDATE_STAT64(tx_stat_gterr, + tx_stat_dot3statsinternalmactransmiterrors); + UPDATE_STAT64(tx_stat_gtufl, tx_stat_mac_ufl); + + /* collect PFC stats */ + pstats->pfc_frames_tx_hi = new->tx_stat_gtpp_hi; + pstats->pfc_frames_tx_lo = new->tx_stat_gtpp_lo; + + pstats->pfc_frames_rx_hi = new->rx_stat_grpp_hi; + pstats->pfc_frames_rx_lo = new->rx_stat_grpp_lo; + } + + estats->pause_frames_received_hi = + pstats->mac_stx[1].rx_stat_mac_xpf_hi; + estats->pause_frames_received_lo = + pstats->mac_stx[1].rx_stat_mac_xpf_lo; + + estats->pause_frames_sent_hi = + pstats->mac_stx[1].tx_stat_outxoffsent_hi; + estats->pause_frames_sent_lo = + pstats->mac_stx[1].tx_stat_outxoffsent_lo; + + estats->pfc_frames_received_hi = + pstats->pfc_frames_rx_hi; + estats->pfc_frames_received_lo = + pstats->pfc_frames_rx_lo; + estats->pfc_frames_sent_hi = + pstats->pfc_frames_tx_hi; + estats->pfc_frames_sent_lo = + pstats->pfc_frames_tx_lo; +} + +static void bnx2x_mstat_stats_update(struct bnx2x *bp) +{ + struct host_port_stats *pstats = bnx2x_sp(bp, port_stats); + struct bnx2x_eth_stats *estats = &bp->eth_stats; + + struct mstat_stats *new = bnx2x_sp(bp, mac_stats.mstat_stats); + + ADD_STAT64(stats_rx.rx_grerb, rx_stat_ifhcinbadoctets); + ADD_STAT64(stats_rx.rx_grfcs, rx_stat_dot3statsfcserrors); + ADD_STAT64(stats_rx.rx_grund, rx_stat_etherstatsundersizepkts); + ADD_STAT64(stats_rx.rx_grovr, rx_stat_dot3statsframestoolong); + ADD_STAT64(stats_rx.rx_grfrg, rx_stat_etherstatsfragments); + ADD_STAT64(stats_rx.rx_grxcf, rx_stat_maccontrolframesreceived); + ADD_STAT64(stats_rx.rx_grxpf, rx_stat_xoffstateentered); + ADD_STAT64(stats_rx.rx_grxpf, rx_stat_mac_xpf); + ADD_STAT64(stats_tx.tx_gtxpf, tx_stat_outxoffsent); + ADD_STAT64(stats_tx.tx_gtxpf, tx_stat_flowcontroldone); + + /* collect pfc stats */ + ADD_64(pstats->pfc_frames_tx_hi, new->stats_tx.tx_gtxpp_hi, + pstats->pfc_frames_tx_lo, new->stats_tx.tx_gtxpp_lo); + ADD_64(pstats->pfc_frames_rx_hi, new->stats_rx.rx_grxpp_hi, + pstats->pfc_frames_rx_lo, new->stats_rx.rx_grxpp_lo); + + ADD_STAT64(stats_tx.tx_gt64, tx_stat_etherstatspkts64octets); + ADD_STAT64(stats_tx.tx_gt127, + tx_stat_etherstatspkts65octetsto127octets); + ADD_STAT64(stats_tx.tx_gt255, + tx_stat_etherstatspkts128octetsto255octets); + ADD_STAT64(stats_tx.tx_gt511, + tx_stat_etherstatspkts256octetsto511octets); + ADD_STAT64(stats_tx.tx_gt1023, + tx_stat_etherstatspkts512octetsto1023octets); + ADD_STAT64(stats_tx.tx_gt1518, + tx_stat_etherstatspkts1024octetsto1522octets); + ADD_STAT64(stats_tx.tx_gt2047, tx_stat_mac_2047); + + ADD_STAT64(stats_tx.tx_gt4095, tx_stat_mac_4095); + ADD_STAT64(stats_tx.tx_gt9216, tx_stat_mac_9216); + ADD_STAT64(stats_tx.tx_gt16383, tx_stat_mac_16383); + + ADD_STAT64(stats_tx.tx_gterr, + tx_stat_dot3statsinternalmactransmiterrors); + ADD_STAT64(stats_tx.tx_gtufl, tx_stat_mac_ufl); + + estats->etherstatspkts1024octetsto1522octets_hi = + pstats->mac_stx[1].tx_stat_etherstatspkts1024octetsto1522octets_hi; + estats->etherstatspkts1024octetsto1522octets_lo = + pstats->mac_stx[1].tx_stat_etherstatspkts1024octetsto1522octets_lo; + + estats->etherstatspktsover1522octets_hi = + pstats->mac_stx[1].tx_stat_mac_2047_hi; + estats->etherstatspktsover1522octets_lo = + pstats->mac_stx[1].tx_stat_mac_2047_lo; + + ADD_64(estats->etherstatspktsover1522octets_hi, + pstats->mac_stx[1].tx_stat_mac_4095_hi, + estats->etherstatspktsover1522octets_lo, + pstats->mac_stx[1].tx_stat_mac_4095_lo); + + ADD_64(estats->etherstatspktsover1522octets_hi, + pstats->mac_stx[1].tx_stat_mac_9216_hi, + estats->etherstatspktsover1522octets_lo, + pstats->mac_stx[1].tx_stat_mac_9216_lo); + + ADD_64(estats->etherstatspktsover1522octets_hi, + pstats->mac_stx[1].tx_stat_mac_16383_hi, + estats->etherstatspktsover1522octets_lo, + pstats->mac_stx[1].tx_stat_mac_16383_lo); + + estats->pause_frames_received_hi = + pstats->mac_stx[1].rx_stat_mac_xpf_hi; + estats->pause_frames_received_lo = + pstats->mac_stx[1].rx_stat_mac_xpf_lo; + + estats->pause_frames_sent_hi = + pstats->mac_stx[1].tx_stat_outxoffsent_hi; + estats->pause_frames_sent_lo = + pstats->mac_stx[1].tx_stat_outxoffsent_lo; + + estats->pfc_frames_received_hi = + pstats->pfc_frames_rx_hi; + estats->pfc_frames_received_lo = + pstats->pfc_frames_rx_lo; + estats->pfc_frames_sent_hi = + pstats->pfc_frames_tx_hi; + estats->pfc_frames_sent_lo = + pstats->pfc_frames_tx_lo; +} + +static void bnx2x_emac_stats_update(struct bnx2x *bp) +{ + struct emac_stats *new = bnx2x_sp(bp, mac_stats.emac_stats); + struct host_port_stats *pstats = bnx2x_sp(bp, port_stats); + struct bnx2x_eth_stats *estats = &bp->eth_stats; + + UPDATE_EXTEND_STAT(rx_stat_ifhcinbadoctets); + UPDATE_EXTEND_STAT(tx_stat_ifhcoutbadoctets); + UPDATE_EXTEND_STAT(rx_stat_dot3statsfcserrors); + UPDATE_EXTEND_STAT(rx_stat_dot3statsalignmenterrors); + UPDATE_EXTEND_STAT(rx_stat_dot3statscarriersenseerrors); + UPDATE_EXTEND_STAT(rx_stat_falsecarriererrors); + UPDATE_EXTEND_STAT(rx_stat_etherstatsundersizepkts); + UPDATE_EXTEND_STAT(rx_stat_dot3statsframestoolong); + UPDATE_EXTEND_STAT(rx_stat_etherstatsfragments); + UPDATE_EXTEND_STAT(rx_stat_etherstatsjabbers); + UPDATE_EXTEND_STAT(rx_stat_maccontrolframesreceived); + UPDATE_EXTEND_STAT(rx_stat_xoffstateentered); + UPDATE_EXTEND_STAT(rx_stat_xonpauseframesreceived); + UPDATE_EXTEND_STAT(rx_stat_xoffpauseframesreceived); + UPDATE_EXTEND_STAT(tx_stat_outxonsent); + UPDATE_EXTEND_STAT(tx_stat_outxoffsent); + UPDATE_EXTEND_STAT(tx_stat_flowcontroldone); + UPDATE_EXTEND_STAT(tx_stat_etherstatscollisions); + UPDATE_EXTEND_STAT(tx_stat_dot3statssinglecollisionframes); + UPDATE_EXTEND_STAT(tx_stat_dot3statsmultiplecollisionframes); + UPDATE_EXTEND_STAT(tx_stat_dot3statsdeferredtransmissions); + UPDATE_EXTEND_STAT(tx_stat_dot3statsexcessivecollisions); + UPDATE_EXTEND_STAT(tx_stat_dot3statslatecollisions); + UPDATE_EXTEND_STAT(tx_stat_etherstatspkts64octets); + UPDATE_EXTEND_STAT(tx_stat_etherstatspkts65octetsto127octets); + UPDATE_EXTEND_STAT(tx_stat_etherstatspkts128octetsto255octets); + UPDATE_EXTEND_STAT(tx_stat_etherstatspkts256octetsto511octets); + UPDATE_EXTEND_STAT(tx_stat_etherstatspkts512octetsto1023octets); + UPDATE_EXTEND_STAT(tx_stat_etherstatspkts1024octetsto1522octets); + UPDATE_EXTEND_STAT(tx_stat_etherstatspktsover1522octets); + UPDATE_EXTEND_STAT(tx_stat_dot3statsinternalmactransmiterrors); + + estats->pause_frames_received_hi = + pstats->mac_stx[1].rx_stat_xonpauseframesreceived_hi; + estats->pause_frames_received_lo = + pstats->mac_stx[1].rx_stat_xonpauseframesreceived_lo; + ADD_64(estats->pause_frames_received_hi, + pstats->mac_stx[1].rx_stat_xoffpauseframesreceived_hi, + estats->pause_frames_received_lo, + pstats->mac_stx[1].rx_stat_xoffpauseframesreceived_lo); + + estats->pause_frames_sent_hi = + pstats->mac_stx[1].tx_stat_outxonsent_hi; + estats->pause_frames_sent_lo = + pstats->mac_stx[1].tx_stat_outxonsent_lo; + ADD_64(estats->pause_frames_sent_hi, + pstats->mac_stx[1].tx_stat_outxoffsent_hi, + estats->pause_frames_sent_lo, + pstats->mac_stx[1].tx_stat_outxoffsent_lo); +} + +static int bnx2x_hw_stats_update(struct bnx2x *bp) +{ + struct nig_stats *new = bnx2x_sp(bp, nig_stats); + struct nig_stats *old = &(bp->port.old_nig_stats); + struct host_port_stats *pstats = bnx2x_sp(bp, port_stats); + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct { + u32 lo; + u32 hi; + } diff; + + switch (bp->link_vars.mac_type) { + case MAC_TYPE_BMAC: + bnx2x_bmac_stats_update(bp); + break; + + case MAC_TYPE_EMAC: + bnx2x_emac_stats_update(bp); + break; + + case MAC_TYPE_UMAC: + case MAC_TYPE_XMAC: + bnx2x_mstat_stats_update(bp); + break; + + case MAC_TYPE_NONE: /* unreached */ + DP(BNX2X_MSG_STATS, + "stats updated by DMAE but no MAC active\n"); + return -1; + + default: /* unreached */ + BNX2X_ERR("Unknown MAC type\n"); + } + + ADD_EXTEND_64(pstats->brb_drop_hi, pstats->brb_drop_lo, + new->brb_discard - old->brb_discard); + ADD_EXTEND_64(estats->brb_truncate_hi, estats->brb_truncate_lo, + new->brb_truncate - old->brb_truncate); + + if (!CHIP_IS_E3(bp)) { + UPDATE_STAT64_NIG(egress_mac_pkt0, + etherstatspkts1024octetsto1522octets); + UPDATE_STAT64_NIG(egress_mac_pkt1, + etherstatspktsover1522octets); + } + + memcpy(old, new, sizeof(struct nig_stats)); + + memcpy(&(estats->rx_stat_ifhcinbadoctets_hi), &(pstats->mac_stx[1]), + sizeof(struct mac_stx)); + estats->brb_drop_hi = pstats->brb_drop_hi; + estats->brb_drop_lo = pstats->brb_drop_lo; + + pstats->host_port_stats_counter++; + + if (CHIP_IS_E3(bp)) { + u32 lpi_reg = BP_PORT(bp) ? MISC_REG_CPMU_LP_SM_ENT_CNT_P1 + : MISC_REG_CPMU_LP_SM_ENT_CNT_P0; + estats->eee_tx_lpi += REG_RD(bp, lpi_reg); + } + + if (!BP_NOMCP(bp)) { + u32 nig_timer_max = + SHMEM_RD(bp, port_mb[BP_PORT(bp)].stat_nig_timer); + if (nig_timer_max != estats->nig_timer_max) { + estats->nig_timer_max = nig_timer_max; + BNX2X_ERR("NIG timer max (%u)\n", + estats->nig_timer_max); + } + } + + return 0; +} + +static int bnx2x_storm_stats_validate_counters(struct bnx2x *bp) +{ + struct stats_counter *counters = &bp->fw_stats_data->storm_counters; + u16 cur_stats_counter; + /* Make sure we use the value of the counter + * used for sending the last stats ramrod. + */ + cur_stats_counter = bp->stats_counter - 1; + + /* are storm stats valid? */ + if (le16_to_cpu(counters->xstats_counter) != cur_stats_counter) { + DP(BNX2X_MSG_STATS, + "stats not updated by xstorm xstorm counter (0x%x) != stats_counter (0x%x)\n", + le16_to_cpu(counters->xstats_counter), bp->stats_counter); + return -EAGAIN; + } + + if (le16_to_cpu(counters->ustats_counter) != cur_stats_counter) { + DP(BNX2X_MSG_STATS, + "stats not updated by ustorm ustorm counter (0x%x) != stats_counter (0x%x)\n", + le16_to_cpu(counters->ustats_counter), bp->stats_counter); + return -EAGAIN; + } + + if (le16_to_cpu(counters->cstats_counter) != cur_stats_counter) { + DP(BNX2X_MSG_STATS, + "stats not updated by cstorm cstorm counter (0x%x) != stats_counter (0x%x)\n", + le16_to_cpu(counters->cstats_counter), bp->stats_counter); + return -EAGAIN; + } + + if (le16_to_cpu(counters->tstats_counter) != cur_stats_counter) { + DP(BNX2X_MSG_STATS, + "stats not updated by tstorm tstorm counter (0x%x) != stats_counter (0x%x)\n", + le16_to_cpu(counters->tstats_counter), bp->stats_counter); + return -EAGAIN; + } + return 0; +} + +static int bnx2x_storm_stats_update(struct bnx2x *bp) +{ + struct tstorm_per_port_stats *tport = + &bp->fw_stats_data->port.tstorm_port_statistics; + struct tstorm_per_pf_stats *tfunc = + &bp->fw_stats_data->pf.tstorm_pf_statistics; + struct host_func_stats *fstats = &bp->func_stats; + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct bnx2x_eth_stats_old *estats_old = &bp->eth_stats_old; + int i; + + /* vfs stat counter is managed by pf */ + if (IS_PF(bp) && bnx2x_storm_stats_validate_counters(bp)) + return -EAGAIN; + + estats->error_bytes_received_hi = 0; + estats->error_bytes_received_lo = 0; + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + struct tstorm_per_queue_stats *tclient = + &bp->fw_stats_data->queue_stats[i]. + tstorm_queue_statistics; + struct tstorm_per_queue_stats *old_tclient = + &bnx2x_fp_stats(bp, fp)->old_tclient; + struct ustorm_per_queue_stats *uclient = + &bp->fw_stats_data->queue_stats[i]. + ustorm_queue_statistics; + struct ustorm_per_queue_stats *old_uclient = + &bnx2x_fp_stats(bp, fp)->old_uclient; + struct xstorm_per_queue_stats *xclient = + &bp->fw_stats_data->queue_stats[i]. + xstorm_queue_statistics; + struct xstorm_per_queue_stats *old_xclient = + &bnx2x_fp_stats(bp, fp)->old_xclient; + struct bnx2x_eth_q_stats *qstats = + &bnx2x_fp_stats(bp, fp)->eth_q_stats; + struct bnx2x_eth_q_stats_old *qstats_old = + &bnx2x_fp_stats(bp, fp)->eth_q_stats_old; + + u32 diff; + + DP(BNX2X_MSG_STATS, "queue[%d]: ucast_sent 0x%x, bcast_sent 0x%x mcast_sent 0x%x\n", + i, xclient->ucast_pkts_sent, + xclient->bcast_pkts_sent, xclient->mcast_pkts_sent); + + DP(BNX2X_MSG_STATS, "---------------\n"); + + UPDATE_QSTAT(tclient->rcv_bcast_bytes, + total_broadcast_bytes_received); + UPDATE_QSTAT(tclient->rcv_mcast_bytes, + total_multicast_bytes_received); + UPDATE_QSTAT(tclient->rcv_ucast_bytes, + total_unicast_bytes_received); + + /* + * sum to total_bytes_received all + * unicast/multicast/broadcast + */ + qstats->total_bytes_received_hi = + qstats->total_broadcast_bytes_received_hi; + qstats->total_bytes_received_lo = + qstats->total_broadcast_bytes_received_lo; + + ADD_64(qstats->total_bytes_received_hi, + qstats->total_multicast_bytes_received_hi, + qstats->total_bytes_received_lo, + qstats->total_multicast_bytes_received_lo); + + ADD_64(qstats->total_bytes_received_hi, + qstats->total_unicast_bytes_received_hi, + qstats->total_bytes_received_lo, + qstats->total_unicast_bytes_received_lo); + + qstats->valid_bytes_received_hi = + qstats->total_bytes_received_hi; + qstats->valid_bytes_received_lo = + qstats->total_bytes_received_lo; + + UPDATE_EXTEND_TSTAT(rcv_ucast_pkts, + total_unicast_packets_received); + UPDATE_EXTEND_TSTAT(rcv_mcast_pkts, + total_multicast_packets_received); + UPDATE_EXTEND_TSTAT(rcv_bcast_pkts, + total_broadcast_packets_received); + UPDATE_EXTEND_E_TSTAT(pkts_too_big_discard, + etherstatsoverrsizepkts, 32); + UPDATE_EXTEND_E_TSTAT(no_buff_discard, no_buff_discard, 16); + + SUB_EXTEND_USTAT(ucast_no_buff_pkts, + total_unicast_packets_received); + SUB_EXTEND_USTAT(mcast_no_buff_pkts, + total_multicast_packets_received); + SUB_EXTEND_USTAT(bcast_no_buff_pkts, + total_broadcast_packets_received); + UPDATE_EXTEND_E_USTAT(ucast_no_buff_pkts, no_buff_discard); + UPDATE_EXTEND_E_USTAT(mcast_no_buff_pkts, no_buff_discard); + UPDATE_EXTEND_E_USTAT(bcast_no_buff_pkts, no_buff_discard); + + UPDATE_QSTAT(xclient->bcast_bytes_sent, + total_broadcast_bytes_transmitted); + UPDATE_QSTAT(xclient->mcast_bytes_sent, + total_multicast_bytes_transmitted); + UPDATE_QSTAT(xclient->ucast_bytes_sent, + total_unicast_bytes_transmitted); + + /* + * sum to total_bytes_transmitted all + * unicast/multicast/broadcast + */ + qstats->total_bytes_transmitted_hi = + qstats->total_unicast_bytes_transmitted_hi; + qstats->total_bytes_transmitted_lo = + qstats->total_unicast_bytes_transmitted_lo; + + ADD_64(qstats->total_bytes_transmitted_hi, + qstats->total_broadcast_bytes_transmitted_hi, + qstats->total_bytes_transmitted_lo, + qstats->total_broadcast_bytes_transmitted_lo); + + ADD_64(qstats->total_bytes_transmitted_hi, + qstats->total_multicast_bytes_transmitted_hi, + qstats->total_bytes_transmitted_lo, + qstats->total_multicast_bytes_transmitted_lo); + + UPDATE_EXTEND_XSTAT(ucast_pkts_sent, + total_unicast_packets_transmitted); + UPDATE_EXTEND_XSTAT(mcast_pkts_sent, + total_multicast_packets_transmitted); + UPDATE_EXTEND_XSTAT(bcast_pkts_sent, + total_broadcast_packets_transmitted); + + UPDATE_EXTEND_TSTAT(checksum_discard, + total_packets_received_checksum_discarded); + UPDATE_EXTEND_TSTAT(ttl0_discard, + total_packets_received_ttl0_discarded); + + UPDATE_EXTEND_XSTAT(error_drop_pkts, + total_transmitted_dropped_packets_error); + + /* TPA aggregations completed */ + UPDATE_EXTEND_E_USTAT(coalesced_events, total_tpa_aggregations); + /* Number of network frames aggregated by TPA */ + UPDATE_EXTEND_E_USTAT(coalesced_pkts, + total_tpa_aggregated_frames); + /* Total number of bytes in completed TPA aggregations */ + UPDATE_QSTAT(uclient->coalesced_bytes, total_tpa_bytes); + + UPDATE_ESTAT_QSTAT_64(total_tpa_bytes); + + UPDATE_FSTAT_QSTAT(total_bytes_received); + UPDATE_FSTAT_QSTAT(total_bytes_transmitted); + UPDATE_FSTAT_QSTAT(total_unicast_packets_received); + UPDATE_FSTAT_QSTAT(total_multicast_packets_received); + UPDATE_FSTAT_QSTAT(total_broadcast_packets_received); + UPDATE_FSTAT_QSTAT(total_unicast_packets_transmitted); + UPDATE_FSTAT_QSTAT(total_multicast_packets_transmitted); + UPDATE_FSTAT_QSTAT(total_broadcast_packets_transmitted); + UPDATE_FSTAT_QSTAT(valid_bytes_received); + } + + ADD_64(estats->total_bytes_received_hi, + estats->rx_stat_ifhcinbadoctets_hi, + estats->total_bytes_received_lo, + estats->rx_stat_ifhcinbadoctets_lo); + + ADD_64_LE(estats->total_bytes_received_hi, + tfunc->rcv_error_bytes.hi, + estats->total_bytes_received_lo, + tfunc->rcv_error_bytes.lo); + + ADD_64_LE(estats->error_bytes_received_hi, + tfunc->rcv_error_bytes.hi, + estats->error_bytes_received_lo, + tfunc->rcv_error_bytes.lo); + + UPDATE_ESTAT(etherstatsoverrsizepkts, rx_stat_dot3statsframestoolong); + + ADD_64(estats->error_bytes_received_hi, + estats->rx_stat_ifhcinbadoctets_hi, + estats->error_bytes_received_lo, + estats->rx_stat_ifhcinbadoctets_lo); + + if (bp->port.pmf) { + struct bnx2x_fw_port_stats_old *fwstats = &bp->fw_stats_old; + UPDATE_FW_STAT(mac_filter_discard); + UPDATE_FW_STAT(mf_tag_discard); + UPDATE_FW_STAT(brb_truncate_discard); + UPDATE_FW_STAT(mac_discard); + } + + fstats->host_func_stats_start = ++fstats->host_func_stats_end; + + bp->stats_pending = 0; + + return 0; +} + +static void bnx2x_net_stats_update(struct bnx2x *bp) +{ + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct net_device_stats *nstats = &bp->dev->stats; + unsigned long tmp; + int i; + + nstats->rx_packets = + bnx2x_hilo(&estats->total_unicast_packets_received_hi) + + bnx2x_hilo(&estats->total_multicast_packets_received_hi) + + bnx2x_hilo(&estats->total_broadcast_packets_received_hi); + + nstats->tx_packets = + bnx2x_hilo(&estats->total_unicast_packets_transmitted_hi) + + bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi) + + bnx2x_hilo(&estats->total_broadcast_packets_transmitted_hi); + + nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi); + + nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi); + + tmp = estats->mac_discard; + for_each_rx_queue(bp, i) { + struct tstorm_per_queue_stats *old_tclient = + &bp->fp_stats[i].old_tclient; + tmp += le32_to_cpu(old_tclient->checksum_discard); + } + nstats->rx_dropped = tmp + bp->net_stats_old.rx_dropped; + + nstats->tx_dropped = 0; + + nstats->multicast = + bnx2x_hilo(&estats->total_multicast_packets_received_hi); + + nstats->collisions = + bnx2x_hilo(&estats->tx_stat_etherstatscollisions_hi); + + nstats->rx_length_errors = + bnx2x_hilo(&estats->rx_stat_etherstatsundersizepkts_hi) + + bnx2x_hilo(&estats->etherstatsoverrsizepkts_hi); + nstats->rx_over_errors = bnx2x_hilo(&estats->brb_drop_hi) + + bnx2x_hilo(&estats->brb_truncate_hi); + nstats->rx_crc_errors = + bnx2x_hilo(&estats->rx_stat_dot3statsfcserrors_hi); + nstats->rx_frame_errors = + bnx2x_hilo(&estats->rx_stat_dot3statsalignmenterrors_hi); + nstats->rx_fifo_errors = bnx2x_hilo(&estats->no_buff_discard_hi); + nstats->rx_missed_errors = 0; + + nstats->rx_errors = nstats->rx_length_errors + + nstats->rx_over_errors + + nstats->rx_crc_errors + + nstats->rx_frame_errors + + nstats->rx_fifo_errors + + nstats->rx_missed_errors; + + nstats->tx_aborted_errors = + bnx2x_hilo(&estats->tx_stat_dot3statslatecollisions_hi) + + bnx2x_hilo(&estats->tx_stat_dot3statsexcessivecollisions_hi); + nstats->tx_carrier_errors = + bnx2x_hilo(&estats->rx_stat_dot3statscarriersenseerrors_hi); + nstats->tx_fifo_errors = 0; + nstats->tx_heartbeat_errors = 0; + nstats->tx_window_errors = 0; + + nstats->tx_errors = nstats->tx_aborted_errors + + nstats->tx_carrier_errors + + bnx2x_hilo(&estats->tx_stat_dot3statsinternalmactransmiterrors_hi); +} + +static void bnx2x_drv_stats_update(struct bnx2x *bp) +{ + struct bnx2x_eth_stats *estats = &bp->eth_stats; + int i; + + for_each_queue(bp, i) { + struct bnx2x_eth_q_stats *qstats = &bp->fp_stats[i].eth_q_stats; + struct bnx2x_eth_q_stats_old *qstats_old = + &bp->fp_stats[i].eth_q_stats_old; + + UPDATE_ESTAT_QSTAT(driver_xoff); + UPDATE_ESTAT_QSTAT(rx_err_discard_pkt); + UPDATE_ESTAT_QSTAT(rx_skb_alloc_failed); + UPDATE_ESTAT_QSTAT(hw_csum_err); + UPDATE_ESTAT_QSTAT(driver_filtered_tx_pkt); + } +} + +static bool bnx2x_edebug_stats_stopped(struct bnx2x *bp) +{ + u32 val; + + if (SHMEM2_HAS(bp, edebug_driver_if[1])) { + val = SHMEM2_RD(bp, edebug_driver_if[1]); + + if (val == EDEBUG_DRIVER_IF_OP_CODE_DISABLE_STAT) + return true; + } + + return false; +} + +static void bnx2x_stats_update(struct bnx2x *bp) +{ + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + if (bnx2x_edebug_stats_stopped(bp)) + return; + + if (IS_PF(bp)) { + if (*stats_comp != DMAE_COMP_VAL) + return; + + if (bp->port.pmf) + bnx2x_hw_stats_update(bp); + + if (bnx2x_storm_stats_update(bp)) { + if (bp->stats_pending++ == 3) { + BNX2X_ERR("storm stats were not updated for 3 times\n"); + bnx2x_panic(); + } + return; + } + } else { + /* vf doesn't collect HW statistics, and doesn't get completions + * perform only update + */ + bnx2x_storm_stats_update(bp); + } + + bnx2x_net_stats_update(bp); + bnx2x_drv_stats_update(bp); + + /* vf is done */ + if (IS_VF(bp)) + return; + + if (netif_msg_timer(bp)) { + struct bnx2x_eth_stats *estats = &bp->eth_stats; + + netdev_dbg(bp->dev, "brb drops %u brb truncate %u\n", + estats->brb_drop_lo, estats->brb_truncate_lo); + } + + bnx2x_hw_stats_post(bp); + bnx2x_storm_stats_post(bp); +} + +static void bnx2x_port_stats_stop(struct bnx2x *bp) +{ + struct dmae_command *dmae; + u32 opcode; + int loader_idx = PMF_DMAE_C(bp); + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + bp->executer_idx = 0; + + opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_PCI, DMAE_DST_GRC, false, 0); + + if (bp->port.port_stx) { + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + if (bp->func_stx) + dmae->opcode = bnx2x_dmae_opcode_add_comp( + opcode, DMAE_COMP_GRC); + else + dmae->opcode = bnx2x_dmae_opcode_add_comp( + opcode, DMAE_COMP_PCI); + + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, port_stats)); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, port_stats)); + dmae->dst_addr_lo = bp->port.port_stx >> 2; + dmae->dst_addr_hi = 0; + dmae->len = bnx2x_get_port_stats_dma_len(bp); + if (bp->func_stx) { + dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2; + dmae->comp_addr_hi = 0; + dmae->comp_val = 1; + } else { + dmae->comp_addr_lo = + U64_LO(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_addr_hi = + U64_HI(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_val = DMAE_COMP_VAL; + + *stats_comp = 0; + } + } + + if (bp->func_stx) { + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = + bnx2x_dmae_opcode_add_comp(opcode, DMAE_COMP_PCI); + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, func_stats)); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, func_stats)); + dmae->dst_addr_lo = bp->func_stx >> 2; + dmae->dst_addr_hi = 0; + dmae->len = sizeof(struct host_func_stats) >> 2; + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_val = DMAE_COMP_VAL; + + *stats_comp = 0; + } +} + +static void bnx2x_stats_stop(struct bnx2x *bp) +{ + bool update = false; + + bnx2x_stats_comp(bp); + + if (bp->port.pmf) + update = (bnx2x_hw_stats_update(bp) == 0); + + update |= (bnx2x_storm_stats_update(bp) == 0); + + if (update) { + bnx2x_net_stats_update(bp); + + if (bp->port.pmf) + bnx2x_port_stats_stop(bp); + + bnx2x_hw_stats_post(bp); + bnx2x_stats_comp(bp); + } +} + +static void bnx2x_stats_do_nothing(struct bnx2x *bp) +{ +} + +static const struct { + void (*action)(struct bnx2x *bp); + enum bnx2x_stats_state next_state; +} bnx2x_stats_stm[STATS_STATE_MAX][STATS_EVENT_MAX] = { +/* state event */ +{ +/* DISABLED PMF */ {bnx2x_stats_pmf_update, STATS_STATE_DISABLED}, +/* LINK_UP */ {bnx2x_stats_start, STATS_STATE_ENABLED}, +/* UPDATE */ {bnx2x_stats_do_nothing, STATS_STATE_DISABLED}, +/* STOP */ {bnx2x_stats_do_nothing, STATS_STATE_DISABLED} +}, +{ +/* ENABLED PMF */ {bnx2x_stats_pmf_start, STATS_STATE_ENABLED}, +/* LINK_UP */ {bnx2x_stats_restart, STATS_STATE_ENABLED}, +/* UPDATE */ {bnx2x_stats_update, STATS_STATE_ENABLED}, +/* STOP */ {bnx2x_stats_stop, STATS_STATE_DISABLED} +} +}; + +void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event) +{ + enum bnx2x_stats_state state = bp->stats_state; + + if (unlikely(bp->panic)) + return; + + /* Statistics update run from timer context, and we don't want to stop + * that context in case someone is in the middle of a transition. + * For other events, wait a bit until lock is taken. + */ + if (down_trylock(&bp->stats_lock)) { + if (event == STATS_EVENT_UPDATE) + return; + + DP(BNX2X_MSG_STATS, + "Unlikely stats' lock contention [event %d]\n", event); + if (unlikely(down_timeout(&bp->stats_lock, HZ / 10))) { + BNX2X_ERR("Failed to take stats lock [event %d]\n", + event); + return; + } + } + + bnx2x_stats_stm[state][event].action(bp); + bp->stats_state = bnx2x_stats_stm[state][event].next_state; + + up(&bp->stats_lock); + + if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp)) + DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n", + state, event, bp->stats_state); +} + +static void bnx2x_port_stats_base_init(struct bnx2x *bp) +{ + struct dmae_command *dmae; + u32 *stats_comp = bnx2x_sp(bp, stats_comp); + + /* sanity */ + if (!bp->port.pmf || !bp->port.port_stx) { + BNX2X_ERR("BUG!\n"); + return; + } + + bp->executer_idx = 0; + + dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]); + dmae->opcode = bnx2x_dmae_opcode(bp, DMAE_SRC_PCI, DMAE_DST_GRC, + true, DMAE_COMP_PCI); + dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, port_stats)); + dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, port_stats)); + dmae->dst_addr_lo = bp->port.port_stx >> 2; + dmae->dst_addr_hi = 0; + dmae->len = bnx2x_get_port_stats_dma_len(bp); + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp)); + dmae->comp_val = DMAE_COMP_VAL; + + *stats_comp = 0; + bnx2x_hw_stats_post(bp); + bnx2x_stats_comp(bp); +} + +/* This function will prepare the statistics ramrod data the way + * we will only have to increment the statistics counter and + * send the ramrod each time we have to. + */ +static void bnx2x_prep_fw_stats_req(struct bnx2x *bp) +{ + int i; + int first_queue_query_index; + struct stats_query_header *stats_hdr = &bp->fw_stats_req->hdr; + + dma_addr_t cur_data_offset; + struct stats_query_entry *cur_query_entry; + + stats_hdr->cmd_num = bp->fw_stats_num; + stats_hdr->drv_stats_counter = 0; + + /* storm_counters struct contains the counters of completed + * statistics requests per storm which are incremented by FW + * each time it completes hadning a statistics ramrod. We will + * check these counters in the timer handler and discard a + * (statistics) ramrod completion. + */ + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, storm_counters); + + stats_hdr->stats_counters_addrs.hi = + cpu_to_le32(U64_HI(cur_data_offset)); + stats_hdr->stats_counters_addrs.lo = + cpu_to_le32(U64_LO(cur_data_offset)); + + /* prepare to the first stats ramrod (will be completed with + * the counters equal to zero) - init counters to somethig different. + */ + memset(&bp->fw_stats_data->storm_counters, 0xff, + sizeof(struct stats_counter)); + + /**** Port FW statistics data ****/ + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, port); + + cur_query_entry = &bp->fw_stats_req->query[BNX2X_PORT_QUERY_IDX]; + + cur_query_entry->kind = STATS_TYPE_PORT; + /* For port query index is a DONT CARE */ + cur_query_entry->index = BP_PORT(bp); + /* For port query funcID is a DONT CARE */ + cur_query_entry->funcID = cpu_to_le16(BP_FUNC(bp)); + cur_query_entry->address.hi = cpu_to_le32(U64_HI(cur_data_offset)); + cur_query_entry->address.lo = cpu_to_le32(U64_LO(cur_data_offset)); + + /**** PF FW statistics data ****/ + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, pf); + + cur_query_entry = &bp->fw_stats_req->query[BNX2X_PF_QUERY_IDX]; + + cur_query_entry->kind = STATS_TYPE_PF; + /* For PF query index is a DONT CARE */ + cur_query_entry->index = BP_PORT(bp); + cur_query_entry->funcID = cpu_to_le16(BP_FUNC(bp)); + cur_query_entry->address.hi = cpu_to_le32(U64_HI(cur_data_offset)); + cur_query_entry->address.lo = cpu_to_le32(U64_LO(cur_data_offset)); + + /**** FCoE FW statistics data ****/ + if (!NO_FCOE(bp)) { + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, fcoe); + + cur_query_entry = + &bp->fw_stats_req->query[BNX2X_FCOE_QUERY_IDX]; + + cur_query_entry->kind = STATS_TYPE_FCOE; + /* For FCoE query index is a DONT CARE */ + cur_query_entry->index = BP_PORT(bp); + cur_query_entry->funcID = cpu_to_le16(BP_FUNC(bp)); + cur_query_entry->address.hi = + cpu_to_le32(U64_HI(cur_data_offset)); + cur_query_entry->address.lo = + cpu_to_le32(U64_LO(cur_data_offset)); + } + + /**** Clients' queries ****/ + cur_data_offset = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, queue_stats); + + /* first queue query index depends whether FCoE offloaded request will + * be included in the ramrod + */ + if (!NO_FCOE(bp)) + first_queue_query_index = BNX2X_FIRST_QUEUE_QUERY_IDX; + else + first_queue_query_index = BNX2X_FIRST_QUEUE_QUERY_IDX - 1; + + for_each_eth_queue(bp, i) { + cur_query_entry = + &bp->fw_stats_req-> + query[first_queue_query_index + i]; + + cur_query_entry->kind = STATS_TYPE_QUEUE; + cur_query_entry->index = bnx2x_stats_id(&bp->fp[i]); + cur_query_entry->funcID = cpu_to_le16(BP_FUNC(bp)); + cur_query_entry->address.hi = + cpu_to_le32(U64_HI(cur_data_offset)); + cur_query_entry->address.lo = + cpu_to_le32(U64_LO(cur_data_offset)); + + cur_data_offset += sizeof(struct per_queue_stats); + } + + /* add FCoE queue query if needed */ + if (!NO_FCOE(bp)) { + cur_query_entry = + &bp->fw_stats_req-> + query[first_queue_query_index + i]; + + cur_query_entry->kind = STATS_TYPE_QUEUE; + cur_query_entry->index = bnx2x_stats_id(&bp->fp[FCOE_IDX(bp)]); + cur_query_entry->funcID = cpu_to_le16(BP_FUNC(bp)); + cur_query_entry->address.hi = + cpu_to_le32(U64_HI(cur_data_offset)); + cur_query_entry->address.lo = + cpu_to_le32(U64_LO(cur_data_offset)); + } +} + +void bnx2x_memset_stats(struct bnx2x *bp) +{ + int i; + + /* function stats */ + for_each_queue(bp, i) { + struct bnx2x_fp_stats *fp_stats = &bp->fp_stats[i]; + + memset(&fp_stats->old_tclient, 0, + sizeof(fp_stats->old_tclient)); + memset(&fp_stats->old_uclient, 0, + sizeof(fp_stats->old_uclient)); + memset(&fp_stats->old_xclient, 0, + sizeof(fp_stats->old_xclient)); + if (bp->stats_init) { + memset(&fp_stats->eth_q_stats, 0, + sizeof(fp_stats->eth_q_stats)); + memset(&fp_stats->eth_q_stats_old, 0, + sizeof(fp_stats->eth_q_stats_old)); + } + } + + memset(&bp->dev->stats, 0, sizeof(bp->dev->stats)); + + if (bp->stats_init) { + memset(&bp->net_stats_old, 0, sizeof(bp->net_stats_old)); + memset(&bp->fw_stats_old, 0, sizeof(bp->fw_stats_old)); + memset(&bp->eth_stats_old, 0, sizeof(bp->eth_stats_old)); + memset(&bp->eth_stats, 0, sizeof(bp->eth_stats)); + memset(&bp->func_stats, 0, sizeof(bp->func_stats)); + } + + bp->stats_state = STATS_STATE_DISABLED; + + if (bp->port.pmf && bp->port.port_stx) + bnx2x_port_stats_base_init(bp); + + /* mark the end of statistics initialization */ + bp->stats_init = false; +} + +void bnx2x_stats_init(struct bnx2x *bp) +{ + int /*abs*/port = BP_PORT(bp); + int mb_idx = BP_FW_MB_IDX(bp); + + if (IS_VF(bp)) { + bnx2x_memset_stats(bp); + return; + } + + bp->stats_pending = 0; + bp->executer_idx = 0; + bp->stats_counter = 0; + + /* port and func stats for management */ + if (!BP_NOMCP(bp)) { + bp->port.port_stx = SHMEM_RD(bp, port_mb[port].port_stx); + bp->func_stx = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_param); + + } else { + bp->port.port_stx = 0; + bp->func_stx = 0; + } + DP(BNX2X_MSG_STATS, "port_stx 0x%x func_stx 0x%x\n", + bp->port.port_stx, bp->func_stx); + + /* pmf should retrieve port statistics from SP on a non-init*/ + if (!bp->stats_init && bp->port.pmf && bp->port.port_stx) + bnx2x_stats_handle(bp, STATS_EVENT_PMF); + + port = BP_PORT(bp); + /* port stats */ + memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats)); + bp->port.old_nig_stats.brb_discard = + REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38); + bp->port.old_nig_stats.brb_truncate = + REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38); + if (!CHIP_IS_E3(bp)) { + REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50, + &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2); + REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50, + &(bp->port.old_nig_stats.egress_mac_pkt1_lo), 2); + } + + /* Prepare statistics ramrod data */ + bnx2x_prep_fw_stats_req(bp); + + /* Clean SP from previous statistics */ + if (bp->stats_init) { + if (bp->func_stx) { + memset(bnx2x_sp(bp, func_stats), 0, + sizeof(struct host_func_stats)); + bnx2x_func_stats_init(bp); + bnx2x_hw_stats_post(bp); + bnx2x_stats_comp(bp); + } + } + + bnx2x_memset_stats(bp); +} + +void bnx2x_save_statistics(struct bnx2x *bp) +{ + int i; + struct net_device_stats *nstats = &bp->dev->stats; + + /* save queue statistics */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + struct bnx2x_eth_q_stats *qstats = + &bnx2x_fp_stats(bp, fp)->eth_q_stats; + struct bnx2x_eth_q_stats_old *qstats_old = + &bnx2x_fp_stats(bp, fp)->eth_q_stats_old; + + UPDATE_QSTAT_OLD(total_unicast_bytes_received_hi); + UPDATE_QSTAT_OLD(total_unicast_bytes_received_lo); + UPDATE_QSTAT_OLD(total_broadcast_bytes_received_hi); + UPDATE_QSTAT_OLD(total_broadcast_bytes_received_lo); + UPDATE_QSTAT_OLD(total_multicast_bytes_received_hi); + UPDATE_QSTAT_OLD(total_multicast_bytes_received_lo); + UPDATE_QSTAT_OLD(total_unicast_bytes_transmitted_hi); + UPDATE_QSTAT_OLD(total_unicast_bytes_transmitted_lo); + UPDATE_QSTAT_OLD(total_broadcast_bytes_transmitted_hi); + UPDATE_QSTAT_OLD(total_broadcast_bytes_transmitted_lo); + UPDATE_QSTAT_OLD(total_multicast_bytes_transmitted_hi); + UPDATE_QSTAT_OLD(total_multicast_bytes_transmitted_lo); + UPDATE_QSTAT_OLD(total_tpa_bytes_hi); + UPDATE_QSTAT_OLD(total_tpa_bytes_lo); + } + + /* save net_device_stats statistics */ + bp->net_stats_old.rx_dropped = nstats->rx_dropped; + + /* store port firmware statistics */ + if (bp->port.pmf && IS_MF(bp)) { + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct bnx2x_fw_port_stats_old *fwstats = &bp->fw_stats_old; + UPDATE_FW_STAT_OLD(mac_filter_discard); + UPDATE_FW_STAT_OLD(mf_tag_discard); + UPDATE_FW_STAT_OLD(brb_truncate_discard); + UPDATE_FW_STAT_OLD(mac_discard); + } +} + +void bnx2x_afex_collect_stats(struct bnx2x *bp, void *void_afex_stats, + u32 stats_type) +{ + int i; + struct afex_stats *afex_stats = (struct afex_stats *)void_afex_stats; + struct bnx2x_eth_stats *estats = &bp->eth_stats; + struct per_queue_stats *fcoe_q_stats = + &bp->fw_stats_data->queue_stats[FCOE_IDX(bp)]; + + struct tstorm_per_queue_stats *fcoe_q_tstorm_stats = + &fcoe_q_stats->tstorm_queue_statistics; + + struct ustorm_per_queue_stats *fcoe_q_ustorm_stats = + &fcoe_q_stats->ustorm_queue_statistics; + + struct xstorm_per_queue_stats *fcoe_q_xstorm_stats = + &fcoe_q_stats->xstorm_queue_statistics; + + struct fcoe_statistics_params *fw_fcoe_stat = + &bp->fw_stats_data->fcoe; + + memset(afex_stats, 0, sizeof(struct afex_stats)); + + for_each_eth_queue(bp, i) { + struct bnx2x_eth_q_stats *qstats = &bp->fp_stats[i].eth_q_stats; + + ADD_64(afex_stats->rx_unicast_bytes_hi, + qstats->total_unicast_bytes_received_hi, + afex_stats->rx_unicast_bytes_lo, + qstats->total_unicast_bytes_received_lo); + + ADD_64(afex_stats->rx_broadcast_bytes_hi, + qstats->total_broadcast_bytes_received_hi, + afex_stats->rx_broadcast_bytes_lo, + qstats->total_broadcast_bytes_received_lo); + + ADD_64(afex_stats->rx_multicast_bytes_hi, + qstats->total_multicast_bytes_received_hi, + afex_stats->rx_multicast_bytes_lo, + qstats->total_multicast_bytes_received_lo); + + ADD_64(afex_stats->rx_unicast_frames_hi, + qstats->total_unicast_packets_received_hi, + afex_stats->rx_unicast_frames_lo, + qstats->total_unicast_packets_received_lo); + + ADD_64(afex_stats->rx_broadcast_frames_hi, + qstats->total_broadcast_packets_received_hi, + afex_stats->rx_broadcast_frames_lo, + qstats->total_broadcast_packets_received_lo); + + ADD_64(afex_stats->rx_multicast_frames_hi, + qstats->total_multicast_packets_received_hi, + afex_stats->rx_multicast_frames_lo, + qstats->total_multicast_packets_received_lo); + + /* sum to rx_frames_discarded all discraded + * packets due to size, ttl0 and checksum + */ + ADD_64(afex_stats->rx_frames_discarded_hi, + qstats->total_packets_received_checksum_discarded_hi, + afex_stats->rx_frames_discarded_lo, + qstats->total_packets_received_checksum_discarded_lo); + + ADD_64(afex_stats->rx_frames_discarded_hi, + qstats->total_packets_received_ttl0_discarded_hi, + afex_stats->rx_frames_discarded_lo, + qstats->total_packets_received_ttl0_discarded_lo); + + ADD_64(afex_stats->rx_frames_discarded_hi, + qstats->etherstatsoverrsizepkts_hi, + afex_stats->rx_frames_discarded_lo, + qstats->etherstatsoverrsizepkts_lo); + + ADD_64(afex_stats->rx_frames_dropped_hi, + qstats->no_buff_discard_hi, + afex_stats->rx_frames_dropped_lo, + qstats->no_buff_discard_lo); + + ADD_64(afex_stats->tx_unicast_bytes_hi, + qstats->total_unicast_bytes_transmitted_hi, + afex_stats->tx_unicast_bytes_lo, + qstats->total_unicast_bytes_transmitted_lo); + + ADD_64(afex_stats->tx_broadcast_bytes_hi, + qstats->total_broadcast_bytes_transmitted_hi, + afex_stats->tx_broadcast_bytes_lo, + qstats->total_broadcast_bytes_transmitted_lo); + + ADD_64(afex_stats->tx_multicast_bytes_hi, + qstats->total_multicast_bytes_transmitted_hi, + afex_stats->tx_multicast_bytes_lo, + qstats->total_multicast_bytes_transmitted_lo); + + ADD_64(afex_stats->tx_unicast_frames_hi, + qstats->total_unicast_packets_transmitted_hi, + afex_stats->tx_unicast_frames_lo, + qstats->total_unicast_packets_transmitted_lo); + + ADD_64(afex_stats->tx_broadcast_frames_hi, + qstats->total_broadcast_packets_transmitted_hi, + afex_stats->tx_broadcast_frames_lo, + qstats->total_broadcast_packets_transmitted_lo); + + ADD_64(afex_stats->tx_multicast_frames_hi, + qstats->total_multicast_packets_transmitted_hi, + afex_stats->tx_multicast_frames_lo, + qstats->total_multicast_packets_transmitted_lo); + + ADD_64(afex_stats->tx_frames_dropped_hi, + qstats->total_transmitted_dropped_packets_error_hi, + afex_stats->tx_frames_dropped_lo, + qstats->total_transmitted_dropped_packets_error_lo); + } + + /* now add FCoE statistics which are collected separately + * (both offloaded and non offloaded) + */ + if (!NO_FCOE(bp)) { + ADD_64_LE(afex_stats->rx_unicast_bytes_hi, + LE32_0, + afex_stats->rx_unicast_bytes_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_byte_cnt); + + ADD_64_LE(afex_stats->rx_unicast_bytes_hi, + fcoe_q_tstorm_stats->rcv_ucast_bytes.hi, + afex_stats->rx_unicast_bytes_lo, + fcoe_q_tstorm_stats->rcv_ucast_bytes.lo); + + ADD_64_LE(afex_stats->rx_broadcast_bytes_hi, + fcoe_q_tstorm_stats->rcv_bcast_bytes.hi, + afex_stats->rx_broadcast_bytes_lo, + fcoe_q_tstorm_stats->rcv_bcast_bytes.lo); + + ADD_64_LE(afex_stats->rx_multicast_bytes_hi, + fcoe_q_tstorm_stats->rcv_mcast_bytes.hi, + afex_stats->rx_multicast_bytes_lo, + fcoe_q_tstorm_stats->rcv_mcast_bytes.lo); + + ADD_64_LE(afex_stats->rx_unicast_frames_hi, + LE32_0, + afex_stats->rx_unicast_frames_lo, + fw_fcoe_stat->rx_stat0.fcoe_rx_pkt_cnt); + + ADD_64_LE(afex_stats->rx_unicast_frames_hi, + LE32_0, + afex_stats->rx_unicast_frames_lo, + fcoe_q_tstorm_stats->rcv_ucast_pkts); + + ADD_64_LE(afex_stats->rx_broadcast_frames_hi, + LE32_0, + afex_stats->rx_broadcast_frames_lo, + fcoe_q_tstorm_stats->rcv_bcast_pkts); + + ADD_64_LE(afex_stats->rx_multicast_frames_hi, + LE32_0, + afex_stats->rx_multicast_frames_lo, + fcoe_q_tstorm_stats->rcv_ucast_pkts); + + ADD_64_LE(afex_stats->rx_frames_discarded_hi, + LE32_0, + afex_stats->rx_frames_discarded_lo, + fcoe_q_tstorm_stats->checksum_discard); + + ADD_64_LE(afex_stats->rx_frames_discarded_hi, + LE32_0, + afex_stats->rx_frames_discarded_lo, + fcoe_q_tstorm_stats->pkts_too_big_discard); + + ADD_64_LE(afex_stats->rx_frames_discarded_hi, + LE32_0, + afex_stats->rx_frames_discarded_lo, + fcoe_q_tstorm_stats->ttl0_discard); + + ADD_64_LE16(afex_stats->rx_frames_dropped_hi, + LE16_0, + afex_stats->rx_frames_dropped_lo, + fcoe_q_tstorm_stats->no_buff_discard); + + ADD_64_LE(afex_stats->rx_frames_dropped_hi, + LE32_0, + afex_stats->rx_frames_dropped_lo, + fcoe_q_ustorm_stats->ucast_no_buff_pkts); + + ADD_64_LE(afex_stats->rx_frames_dropped_hi, + LE32_0, + afex_stats->rx_frames_dropped_lo, + fcoe_q_ustorm_stats->mcast_no_buff_pkts); + + ADD_64_LE(afex_stats->rx_frames_dropped_hi, + LE32_0, + afex_stats->rx_frames_dropped_lo, + fcoe_q_ustorm_stats->bcast_no_buff_pkts); + + ADD_64_LE(afex_stats->rx_frames_dropped_hi, + LE32_0, + afex_stats->rx_frames_dropped_lo, + fw_fcoe_stat->rx_stat1.fcoe_rx_drop_pkt_cnt); + + ADD_64_LE(afex_stats->rx_frames_dropped_hi, + LE32_0, + afex_stats->rx_frames_dropped_lo, + fw_fcoe_stat->rx_stat2.fcoe_rx_drop_pkt_cnt); + + ADD_64_LE(afex_stats->tx_unicast_bytes_hi, + LE32_0, + afex_stats->tx_unicast_bytes_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_byte_cnt); + + ADD_64_LE(afex_stats->tx_unicast_bytes_hi, + fcoe_q_xstorm_stats->ucast_bytes_sent.hi, + afex_stats->tx_unicast_bytes_lo, + fcoe_q_xstorm_stats->ucast_bytes_sent.lo); + + ADD_64_LE(afex_stats->tx_broadcast_bytes_hi, + fcoe_q_xstorm_stats->bcast_bytes_sent.hi, + afex_stats->tx_broadcast_bytes_lo, + fcoe_q_xstorm_stats->bcast_bytes_sent.lo); + + ADD_64_LE(afex_stats->tx_multicast_bytes_hi, + fcoe_q_xstorm_stats->mcast_bytes_sent.hi, + afex_stats->tx_multicast_bytes_lo, + fcoe_q_xstorm_stats->mcast_bytes_sent.lo); + + ADD_64_LE(afex_stats->tx_unicast_frames_hi, + LE32_0, + afex_stats->tx_unicast_frames_lo, + fw_fcoe_stat->tx_stat.fcoe_tx_pkt_cnt); + + ADD_64_LE(afex_stats->tx_unicast_frames_hi, + LE32_0, + afex_stats->tx_unicast_frames_lo, + fcoe_q_xstorm_stats->ucast_pkts_sent); + + ADD_64_LE(afex_stats->tx_broadcast_frames_hi, + LE32_0, + afex_stats->tx_broadcast_frames_lo, + fcoe_q_xstorm_stats->bcast_pkts_sent); + + ADD_64_LE(afex_stats->tx_multicast_frames_hi, + LE32_0, + afex_stats->tx_multicast_frames_lo, + fcoe_q_xstorm_stats->mcast_pkts_sent); + + ADD_64_LE(afex_stats->tx_frames_dropped_hi, + LE32_0, + afex_stats->tx_frames_dropped_lo, + fcoe_q_xstorm_stats->error_drop_pkts); + } + + /* if port stats are requested, add them to the PMF + * stats, as anyway they will be accumulated by the + * MCP before sent to the switch + */ + if ((bp->port.pmf) && (stats_type == VICSTATST_UIF_INDEX)) { + ADD_64(afex_stats->rx_frames_dropped_hi, + 0, + afex_stats->rx_frames_dropped_lo, + estats->mac_filter_discard); + ADD_64(afex_stats->rx_frames_dropped_hi, + 0, + afex_stats->rx_frames_dropped_lo, + estats->brb_truncate_discard); + ADD_64(afex_stats->rx_frames_discarded_hi, + 0, + afex_stats->rx_frames_discarded_lo, + estats->mac_discard); + } +} + +int bnx2x_stats_safe_exec(struct bnx2x *bp, + void (func_to_exec)(void *cookie), + void *cookie) +{ + int cnt = 10, rc = 0; + + /* Wait for statistics to end [while blocking further requests], + * then run supplied function 'safely'. + */ + rc = down_timeout(&bp->stats_lock, HZ / 10); + if (unlikely(rc)) { + BNX2X_ERR("Failed to take statistics lock for safe execution\n"); + goto out_no_lock; + } + + bnx2x_stats_comp(bp); + while (bp->stats_pending && cnt--) + if (bnx2x_storm_stats_update(bp)) + usleep_range(1000, 2000); + if (bp->stats_pending) { + BNX2X_ERR("Failed to wait for stats pending to clear [possibly FW is stuck]\n"); + rc = -EBUSY; + goto out; + } + + func_to_exec(cookie); + +out: + /* No need to restart statistics - if they're enabled, the timer + * will restart the statistics. + */ + up(&bp->stats_lock); +out_no_lock: + return rc; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h new file mode 100644 index 000000000..d55e63692 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h @@ -0,0 +1,560 @@ +/* bnx2x_stats.h: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ +#ifndef BNX2X_STATS_H +#define BNX2X_STATS_H + +#include <linux/types.h> + +struct nig_stats { + u32 brb_discard; + u32 brb_packet; + u32 brb_truncate; + u32 flow_ctrl_discard; + u32 flow_ctrl_octets; + u32 flow_ctrl_packet; + u32 mng_discard; + u32 mng_octet_inp; + u32 mng_octet_out; + u32 mng_packet_inp; + u32 mng_packet_out; + u32 pbf_octets; + u32 pbf_packet; + u32 safc_inp; + u32 egress_mac_pkt0_lo; + u32 egress_mac_pkt0_hi; + u32 egress_mac_pkt1_lo; + u32 egress_mac_pkt1_hi; +}; + +enum bnx2x_stats_event { + STATS_EVENT_PMF = 0, + STATS_EVENT_LINK_UP, + STATS_EVENT_UPDATE, + STATS_EVENT_STOP, + STATS_EVENT_MAX +}; + +enum bnx2x_stats_state { + STATS_STATE_DISABLED = 0, + STATS_STATE_ENABLED, + STATS_STATE_MAX +}; + +struct bnx2x_eth_stats { + u32 total_bytes_received_hi; + u32 total_bytes_received_lo; + u32 total_bytes_transmitted_hi; + u32 total_bytes_transmitted_lo; + u32 total_unicast_packets_received_hi; + u32 total_unicast_packets_received_lo; + u32 total_multicast_packets_received_hi; + u32 total_multicast_packets_received_lo; + u32 total_broadcast_packets_received_hi; + u32 total_broadcast_packets_received_lo; + u32 total_unicast_packets_transmitted_hi; + u32 total_unicast_packets_transmitted_lo; + u32 total_multicast_packets_transmitted_hi; + u32 total_multicast_packets_transmitted_lo; + u32 total_broadcast_packets_transmitted_hi; + u32 total_broadcast_packets_transmitted_lo; + u32 valid_bytes_received_hi; + u32 valid_bytes_received_lo; + + u32 error_bytes_received_hi; + u32 error_bytes_received_lo; + u32 etherstatsoverrsizepkts_hi; + u32 etherstatsoverrsizepkts_lo; + u32 no_buff_discard_hi; + u32 no_buff_discard_lo; + + u32 rx_stat_ifhcinbadoctets_hi; + u32 rx_stat_ifhcinbadoctets_lo; + u32 tx_stat_ifhcoutbadoctets_hi; + u32 tx_stat_ifhcoutbadoctets_lo; + u32 rx_stat_dot3statsfcserrors_hi; + u32 rx_stat_dot3statsfcserrors_lo; + u32 rx_stat_dot3statsalignmenterrors_hi; + u32 rx_stat_dot3statsalignmenterrors_lo; + u32 rx_stat_dot3statscarriersenseerrors_hi; + u32 rx_stat_dot3statscarriersenseerrors_lo; + u32 rx_stat_falsecarriererrors_hi; + u32 rx_stat_falsecarriererrors_lo; + u32 rx_stat_etherstatsundersizepkts_hi; + u32 rx_stat_etherstatsundersizepkts_lo; + u32 rx_stat_dot3statsframestoolong_hi; + u32 rx_stat_dot3statsframestoolong_lo; + u32 rx_stat_etherstatsfragments_hi; + u32 rx_stat_etherstatsfragments_lo; + u32 rx_stat_etherstatsjabbers_hi; + u32 rx_stat_etherstatsjabbers_lo; + u32 rx_stat_maccontrolframesreceived_hi; + u32 rx_stat_maccontrolframesreceived_lo; + u32 rx_stat_bmac_xpf_hi; + u32 rx_stat_bmac_xpf_lo; + u32 rx_stat_bmac_xcf_hi; + u32 rx_stat_bmac_xcf_lo; + u32 rx_stat_xoffstateentered_hi; + u32 rx_stat_xoffstateentered_lo; + u32 rx_stat_xonpauseframesreceived_hi; + u32 rx_stat_xonpauseframesreceived_lo; + u32 rx_stat_xoffpauseframesreceived_hi; + u32 rx_stat_xoffpauseframesreceived_lo; + u32 tx_stat_outxonsent_hi; + u32 tx_stat_outxonsent_lo; + u32 tx_stat_outxoffsent_hi; + u32 tx_stat_outxoffsent_lo; + u32 tx_stat_flowcontroldone_hi; + u32 tx_stat_flowcontroldone_lo; + u32 tx_stat_etherstatscollisions_hi; + u32 tx_stat_etherstatscollisions_lo; + u32 tx_stat_dot3statssinglecollisionframes_hi; + u32 tx_stat_dot3statssinglecollisionframes_lo; + u32 tx_stat_dot3statsmultiplecollisionframes_hi; + u32 tx_stat_dot3statsmultiplecollisionframes_lo; + u32 tx_stat_dot3statsdeferredtransmissions_hi; + u32 tx_stat_dot3statsdeferredtransmissions_lo; + u32 tx_stat_dot3statsexcessivecollisions_hi; + u32 tx_stat_dot3statsexcessivecollisions_lo; + u32 tx_stat_dot3statslatecollisions_hi; + u32 tx_stat_dot3statslatecollisions_lo; + u32 tx_stat_etherstatspkts64octets_hi; + u32 tx_stat_etherstatspkts64octets_lo; + u32 tx_stat_etherstatspkts65octetsto127octets_hi; + u32 tx_stat_etherstatspkts65octetsto127octets_lo; + u32 tx_stat_etherstatspkts128octetsto255octets_hi; + u32 tx_stat_etherstatspkts128octetsto255octets_lo; + u32 tx_stat_etherstatspkts256octetsto511octets_hi; + u32 tx_stat_etherstatspkts256octetsto511octets_lo; + u32 tx_stat_etherstatspkts512octetsto1023octets_hi; + u32 tx_stat_etherstatspkts512octetsto1023octets_lo; + u32 tx_stat_etherstatspkts1024octetsto1522octets_hi; + u32 tx_stat_etherstatspkts1024octetsto1522octets_lo; + u32 tx_stat_etherstatspktsover1522octets_hi; + u32 tx_stat_etherstatspktsover1522octets_lo; + u32 tx_stat_bmac_2047_hi; + u32 tx_stat_bmac_2047_lo; + u32 tx_stat_bmac_4095_hi; + u32 tx_stat_bmac_4095_lo; + u32 tx_stat_bmac_9216_hi; + u32 tx_stat_bmac_9216_lo; + u32 tx_stat_bmac_16383_hi; + u32 tx_stat_bmac_16383_lo; + u32 tx_stat_dot3statsinternalmactransmiterrors_hi; + u32 tx_stat_dot3statsinternalmactransmiterrors_lo; + u32 tx_stat_bmac_ufl_hi; + u32 tx_stat_bmac_ufl_lo; + + u32 pause_frames_received_hi; + u32 pause_frames_received_lo; + u32 pause_frames_sent_hi; + u32 pause_frames_sent_lo; + + u32 etherstatspkts1024octetsto1522octets_hi; + u32 etherstatspkts1024octetsto1522octets_lo; + u32 etherstatspktsover1522octets_hi; + u32 etherstatspktsover1522octets_lo; + + u32 brb_drop_hi; + u32 brb_drop_lo; + u32 brb_truncate_hi; + u32 brb_truncate_lo; + + u32 mac_filter_discard; + u32 mf_tag_discard; + u32 brb_truncate_discard; + u32 mac_discard; + + u32 driver_xoff; + u32 rx_err_discard_pkt; + u32 rx_skb_alloc_failed; + u32 hw_csum_err; + + u32 nig_timer_max; + + /* TPA */ + u32 total_tpa_aggregations_hi; + u32 total_tpa_aggregations_lo; + u32 total_tpa_aggregated_frames_hi; + u32 total_tpa_aggregated_frames_lo; + u32 total_tpa_bytes_hi; + u32 total_tpa_bytes_lo; + + /* PFC */ + u32 pfc_frames_received_hi; + u32 pfc_frames_received_lo; + u32 pfc_frames_sent_hi; + u32 pfc_frames_sent_lo; + + /* Recovery */ + u32 recoverable_error; + u32 unrecoverable_error; + u32 driver_filtered_tx_pkt; + /* src: Clear-on-Read register; Will not survive PMF Migration */ + u32 eee_tx_lpi; + + /* PTP */ + u32 ptp_skip_tx_ts; +}; + +struct bnx2x_eth_q_stats { + u32 total_unicast_bytes_received_hi; + u32 total_unicast_bytes_received_lo; + u32 total_broadcast_bytes_received_hi; + u32 total_broadcast_bytes_received_lo; + u32 total_multicast_bytes_received_hi; + u32 total_multicast_bytes_received_lo; + u32 total_bytes_received_hi; + u32 total_bytes_received_lo; + u32 total_unicast_bytes_transmitted_hi; + u32 total_unicast_bytes_transmitted_lo; + u32 total_broadcast_bytes_transmitted_hi; + u32 total_broadcast_bytes_transmitted_lo; + u32 total_multicast_bytes_transmitted_hi; + u32 total_multicast_bytes_transmitted_lo; + u32 total_bytes_transmitted_hi; + u32 total_bytes_transmitted_lo; + u32 total_unicast_packets_received_hi; + u32 total_unicast_packets_received_lo; + u32 total_multicast_packets_received_hi; + u32 total_multicast_packets_received_lo; + u32 total_broadcast_packets_received_hi; + u32 total_broadcast_packets_received_lo; + u32 total_unicast_packets_transmitted_hi; + u32 total_unicast_packets_transmitted_lo; + u32 total_multicast_packets_transmitted_hi; + u32 total_multicast_packets_transmitted_lo; + u32 total_broadcast_packets_transmitted_hi; + u32 total_broadcast_packets_transmitted_lo; + u32 valid_bytes_received_hi; + u32 valid_bytes_received_lo; + + u32 etherstatsoverrsizepkts_hi; + u32 etherstatsoverrsizepkts_lo; + u32 no_buff_discard_hi; + u32 no_buff_discard_lo; + + u32 driver_xoff; + u32 rx_err_discard_pkt; + u32 rx_skb_alloc_failed; + u32 hw_csum_err; + + u32 total_packets_received_checksum_discarded_hi; + u32 total_packets_received_checksum_discarded_lo; + u32 total_packets_received_ttl0_discarded_hi; + u32 total_packets_received_ttl0_discarded_lo; + u32 total_transmitted_dropped_packets_error_hi; + u32 total_transmitted_dropped_packets_error_lo; + + /* TPA */ + u32 total_tpa_aggregations_hi; + u32 total_tpa_aggregations_lo; + u32 total_tpa_aggregated_frames_hi; + u32 total_tpa_aggregated_frames_lo; + u32 total_tpa_bytes_hi; + u32 total_tpa_bytes_lo; + u32 driver_filtered_tx_pkt; +}; + +struct bnx2x_eth_stats_old { + u32 rx_stat_dot3statsframestoolong_hi; + u32 rx_stat_dot3statsframestoolong_lo; +}; + +struct bnx2x_eth_q_stats_old { + /* Fields to perserve over fw reset*/ + u32 total_unicast_bytes_received_hi; + u32 total_unicast_bytes_received_lo; + u32 total_broadcast_bytes_received_hi; + u32 total_broadcast_bytes_received_lo; + u32 total_multicast_bytes_received_hi; + u32 total_multicast_bytes_received_lo; + u32 total_unicast_bytes_transmitted_hi; + u32 total_unicast_bytes_transmitted_lo; + u32 total_broadcast_bytes_transmitted_hi; + u32 total_broadcast_bytes_transmitted_lo; + u32 total_multicast_bytes_transmitted_hi; + u32 total_multicast_bytes_transmitted_lo; + u32 total_tpa_bytes_hi; + u32 total_tpa_bytes_lo; + + /* Fields to perserve last of */ + u32 total_bytes_received_hi; + u32 total_bytes_received_lo; + u32 total_bytes_transmitted_hi; + u32 total_bytes_transmitted_lo; + u32 total_unicast_packets_received_hi; + u32 total_unicast_packets_received_lo; + u32 total_multicast_packets_received_hi; + u32 total_multicast_packets_received_lo; + u32 total_broadcast_packets_received_hi; + u32 total_broadcast_packets_received_lo; + u32 total_unicast_packets_transmitted_hi; + u32 total_unicast_packets_transmitted_lo; + u32 total_multicast_packets_transmitted_hi; + u32 total_multicast_packets_transmitted_lo; + u32 total_broadcast_packets_transmitted_hi; + u32 total_broadcast_packets_transmitted_lo; + u32 valid_bytes_received_hi; + u32 valid_bytes_received_lo; + + u32 total_tpa_bytes_hi_old; + u32 total_tpa_bytes_lo_old; + + u32 driver_xoff_old; + u32 rx_err_discard_pkt_old; + u32 rx_skb_alloc_failed_old; + u32 hw_csum_err_old; + u32 driver_filtered_tx_pkt_old; +}; + +struct bnx2x_net_stats_old { + u32 rx_dropped; +}; + +struct bnx2x_fw_port_stats_old { + u32 mac_filter_discard; + u32 mf_tag_discard; + u32 brb_truncate_discard; + u32 mac_discard; +}; + +/**************************************************************************** +* Macros +****************************************************************************/ + +/* sum[hi:lo] += add[hi:lo] */ +#define ADD_64(s_hi, a_hi, s_lo, a_lo) \ + do { \ + s_lo += a_lo; \ + s_hi += a_hi + ((s_lo < a_lo) ? 1 : 0); \ + } while (0) + +#define LE32_0 ((__force __le32) 0) +#define LE16_0 ((__force __le16) 0) + +/* The _force is for cases where high value is 0 */ +#define ADD_64_LE(s_hi, a_hi_le, s_lo, a_lo_le) \ + ADD_64(s_hi, le32_to_cpu(a_hi_le), \ + s_lo, le32_to_cpu(a_lo_le)) + +#define ADD_64_LE16(s_hi, a_hi_le, s_lo, a_lo_le) \ + ADD_64(s_hi, le16_to_cpu(a_hi_le), \ + s_lo, le16_to_cpu(a_lo_le)) + +/* difference = minuend - subtrahend */ +#define DIFF_64(d_hi, m_hi, s_hi, d_lo, m_lo, s_lo) \ + do { \ + if (m_lo < s_lo) { \ + /* underflow */ \ + d_hi = m_hi - s_hi; \ + if (d_hi > 0) { \ + /* we can 'loan' 1 */ \ + d_hi--; \ + d_lo = m_lo + (UINT_MAX - s_lo) + 1; \ + } else { \ + /* m_hi <= s_hi */ \ + d_hi = 0; \ + d_lo = 0; \ + } \ + } else { \ + /* m_lo >= s_lo */ \ + if (m_hi < s_hi) { \ + d_hi = 0; \ + d_lo = 0; \ + } else { \ + /* m_hi >= s_hi */ \ + d_hi = m_hi - s_hi; \ + d_lo = m_lo - s_lo; \ + } \ + } \ + } while (0) + +#define UPDATE_STAT64(s, t) \ + do { \ + DIFF_64(diff.hi, new->s##_hi, pstats->mac_stx[0].t##_hi, \ + diff.lo, new->s##_lo, pstats->mac_stx[0].t##_lo); \ + pstats->mac_stx[0].t##_hi = new->s##_hi; \ + pstats->mac_stx[0].t##_lo = new->s##_lo; \ + ADD_64(pstats->mac_stx[1].t##_hi, diff.hi, \ + pstats->mac_stx[1].t##_lo, diff.lo); \ + } while (0) + +#define UPDATE_STAT64_NIG(s, t) \ + do { \ + DIFF_64(diff.hi, new->s##_hi, old->s##_hi, \ + diff.lo, new->s##_lo, old->s##_lo); \ + ADD_64(estats->t##_hi, diff.hi, \ + estats->t##_lo, diff.lo); \ + } while (0) + +/* sum[hi:lo] += add */ +#define ADD_EXTEND_64(s_hi, s_lo, a) \ + do { \ + s_lo += a; \ + s_hi += (s_lo < a) ? 1 : 0; \ + } while (0) + +#define ADD_STAT64(diff, t) \ + do { \ + ADD_64(pstats->mac_stx[1].t##_hi, new->diff##_hi, \ + pstats->mac_stx[1].t##_lo, new->diff##_lo); \ + } while (0) + +#define UPDATE_EXTEND_STAT(s) \ + do { \ + ADD_EXTEND_64(pstats->mac_stx[1].s##_hi, \ + pstats->mac_stx[1].s##_lo, \ + new->s); \ + } while (0) + +#define UPDATE_EXTEND_TSTAT_X(s, t, size) \ + do { \ + diff = le##size##_to_cpu(tclient->s) - \ + le##size##_to_cpu(old_tclient->s); \ + old_tclient->s = tclient->s; \ + ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \ + } while (0) + +#define UPDATE_EXTEND_TSTAT(s, t) UPDATE_EXTEND_TSTAT_X(s, t, 32) + +#define UPDATE_EXTEND_E_TSTAT(s, t, size) \ + do { \ + UPDATE_EXTEND_TSTAT_X(s, t, size); \ + ADD_EXTEND_64(estats->t##_hi, estats->t##_lo, diff); \ + } while (0) + +#define UPDATE_EXTEND_USTAT(s, t) \ + do { \ + diff = le32_to_cpu(uclient->s) - le32_to_cpu(old_uclient->s); \ + old_uclient->s = uclient->s; \ + ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \ + } while (0) + +#define UPDATE_EXTEND_E_USTAT(s, t) \ + do { \ + UPDATE_EXTEND_USTAT(s, t); \ + ADD_EXTEND_64(estats->t##_hi, estats->t##_lo, diff); \ + } while (0) + +#define UPDATE_EXTEND_XSTAT(s, t) \ + do { \ + diff = le32_to_cpu(xclient->s) - le32_to_cpu(old_xclient->s); \ + old_xclient->s = xclient->s; \ + ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \ + } while (0) + +#define UPDATE_QSTAT(s, t) \ + do { \ + qstats->t##_lo = qstats_old->t##_lo + le32_to_cpu(s.lo); \ + qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi) \ + + ((qstats->t##_lo < qstats_old->t##_lo) ? 1 : 0); \ + } while (0) + +#define UPDATE_QSTAT_OLD(f) \ + do { \ + qstats_old->f = qstats->f; \ + } while (0) + +#define UPDATE_ESTAT_QSTAT_64(s) \ + do { \ + ADD_64(estats->s##_hi, qstats->s##_hi, \ + estats->s##_lo, qstats->s##_lo); \ + SUB_64(estats->s##_hi, qstats_old->s##_hi_old, \ + estats->s##_lo, qstats_old->s##_lo_old); \ + qstats_old->s##_hi_old = qstats->s##_hi; \ + qstats_old->s##_lo_old = qstats->s##_lo; \ + } while (0) + +#define UPDATE_ESTAT_QSTAT(s) \ + do { \ + estats->s += qstats->s; \ + estats->s -= qstats_old->s##_old; \ + qstats_old->s##_old = qstats->s; \ + } while (0) + +#define UPDATE_FSTAT_QSTAT(s) \ + do { \ + ADD_64(fstats->s##_hi, qstats->s##_hi, \ + fstats->s##_lo, qstats->s##_lo); \ + SUB_64(fstats->s##_hi, qstats_old->s##_hi, \ + fstats->s##_lo, qstats_old->s##_lo); \ + estats->s##_hi = fstats->s##_hi; \ + estats->s##_lo = fstats->s##_lo; \ + qstats_old->s##_hi = qstats->s##_hi; \ + qstats_old->s##_lo = qstats->s##_lo; \ + } while (0) + +#define UPDATE_FW_STAT(s) \ + do { \ + estats->s = le32_to_cpu(tport->s) + fwstats->s; \ + } while (0) + +#define UPDATE_FW_STAT_OLD(f) \ + do { \ + fwstats->f = estats->f; \ + } while (0) + +#define UPDATE_ESTAT(s, t) \ + do { \ + SUB_64(estats->s##_hi, estats_old->t##_hi, \ + estats->s##_lo, estats_old->t##_lo); \ + ADD_64(estats->s##_hi, estats->t##_hi, \ + estats->s##_lo, estats->t##_lo); \ + estats_old->t##_hi = estats->t##_hi; \ + estats_old->t##_lo = estats->t##_lo; \ + } while (0) + +/* minuend -= subtrahend */ +#define SUB_64(m_hi, s_hi, m_lo, s_lo) \ + do { \ + DIFF_64(m_hi, m_hi, s_hi, m_lo, m_lo, s_lo); \ + } while (0) + +/* minuend[hi:lo] -= subtrahend */ +#define SUB_EXTEND_64(m_hi, m_lo, s) \ + do { \ + SUB_64(m_hi, 0, m_lo, s); \ + } while (0) + +#define SUB_EXTEND_USTAT(s, t) \ + do { \ + diff = le32_to_cpu(uclient->s) - le32_to_cpu(old_uclient->s); \ + SUB_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \ + } while (0) + +/* forward */ +struct bnx2x; + +void bnx2x_memset_stats(struct bnx2x *bp); +void bnx2x_stats_init(struct bnx2x *bp); +void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event); +int bnx2x_stats_safe_exec(struct bnx2x *bp, + void (func_to_exec)(void *cookie), + void *cookie); + +/** + * bnx2x_save_statistics - save statistics when unloading. + * + * @bp: driver handle + */ +void bnx2x_save_statistics(struct bnx2x *bp); + +void bnx2x_afex_collect_stats(struct bnx2x *bp, void *void_afex_stats, + u32 stats_type); +#endif /* BNX2X_STATS_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c new file mode 100644 index 000000000..152758a45 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -0,0 +1,2320 @@ +/* bnx2x_vfpf.c: QLogic Everest network driver. + * + * Copyright 2009-2013 Broadcom Corporation + * Copyright 2014 QLogic Corporation + * All rights reserved + * + * Unless you and QLogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other QLogic software provided under a + * license other than the GPL, without QLogic's express prior written + * consent. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Shmulik Ravid + * Ariel Elior <ariel.elior@qlogic.com> + */ + +#include "bnx2x.h" +#include "bnx2x_cmn.h" +#include <linux/crc32.h> + +static int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx); + +/* place a given tlv on the tlv buffer at a given offset */ +static void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, + u16 offset, u16 type, u16 length) +{ + struct channel_tlv *tl = + (struct channel_tlv *)(tlvs_list + offset); + + tl->type = type; + tl->length = length; +} + +/* Clear the mailbox and init the header of the first tlv */ +static void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, + u16 type, u16 length) +{ + mutex_lock(&bp->vf2pf_mutex); + + DP(BNX2X_MSG_IOV, "preparing to send %d tlv over vf pf channel\n", + type); + + /* Clear mailbox */ + memset(bp->vf2pf_mbox, 0, sizeof(struct bnx2x_vf_mbx_msg)); + + /* init type and length */ + bnx2x_add_tlv(bp, &first_tlv->tl, 0, type, length); + + /* init first tlv header */ + first_tlv->resp_msg_offset = sizeof(bp->vf2pf_mbox->req); +} + +/* releases the mailbox */ +static void bnx2x_vfpf_finalize(struct bnx2x *bp, + struct vfpf_first_tlv *first_tlv) +{ + DP(BNX2X_MSG_IOV, "done sending [%d] tlv over vf pf channel\n", + first_tlv->tl.type); + + mutex_unlock(&bp->vf2pf_mutex); +} + +/* Finds a TLV by type in a TLV buffer; If found, returns pointer to the TLV */ +static void *bnx2x_search_tlv_list(struct bnx2x *bp, void *tlvs_list, + enum channel_tlvs req_tlv) +{ + struct channel_tlv *tlv = (struct channel_tlv *)tlvs_list; + + do { + if (tlv->type == req_tlv) + return tlv; + + if (!tlv->length) { + BNX2X_ERR("Found TLV with length 0\n"); + return NULL; + } + + tlvs_list += tlv->length; + tlv = (struct channel_tlv *)tlvs_list; + } while (tlv->type != CHANNEL_TLV_LIST_END); + + DP(BNX2X_MSG_IOV, "TLV list does not contain %d TLV\n", req_tlv); + + return NULL; +} + +/* list the types and lengths of the tlvs on the buffer */ +static void bnx2x_dp_tlv_list(struct bnx2x *bp, void *tlvs_list) +{ + int i = 1; + struct channel_tlv *tlv = (struct channel_tlv *)tlvs_list; + + while (tlv->type != CHANNEL_TLV_LIST_END) { + /* output tlv */ + DP(BNX2X_MSG_IOV, "TLV number %d: type %d, length %d\n", i, + tlv->type, tlv->length); + + /* advance to next tlv */ + tlvs_list += tlv->length; + + /* cast general tlv list pointer to channel tlv header*/ + tlv = (struct channel_tlv *)tlvs_list; + + i++; + + /* break condition for this loop */ + if (i > MAX_TLVS_IN_LIST) { + WARN(true, "corrupt tlvs"); + return; + } + } + + /* output last tlv */ + DP(BNX2X_MSG_IOV, "TLV number %d: type %d, length %d\n", i, + tlv->type, tlv->length); +} + +/* test whether we support a tlv type */ +bool bnx2x_tlv_supported(u16 tlvtype) +{ + return CHANNEL_TLV_NONE < tlvtype && tlvtype < CHANNEL_TLV_MAX; +} + +static inline int bnx2x_pfvf_status_codes(int rc) +{ + switch (rc) { + case 0: + return PFVF_STATUS_SUCCESS; + case -ENOMEM: + return PFVF_STATUS_NO_RESOURCE; + default: + return PFVF_STATUS_FAILURE; + } +} + +static int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping) +{ + struct cstorm_vf_zone_data __iomem *zone_data = + REG_ADDR(bp, PXP_VF_ADDR_CSDM_GLOBAL_START); + int tout = 100, interval = 100; /* wait for 10 seconds */ + + if (*done) { + BNX2X_ERR("done was non zero before message to pf was sent\n"); + WARN_ON(true); + return -EINVAL; + } + + /* if PF indicated channel is down avoid sending message. Return success + * so calling flow can continue + */ + bnx2x_sample_bulletin(bp); + if (bp->old_bulletin.valid_bitmap & 1 << CHANNEL_DOWN) { + DP(BNX2X_MSG_IOV, "detecting channel down. Aborting message\n"); + *done = PFVF_STATUS_SUCCESS; + return -EINVAL; + } + + /* Write message address */ + writel(U64_LO(msg_mapping), + &zone_data->non_trigger.vf_pf_channel.msg_addr_lo); + writel(U64_HI(msg_mapping), + &zone_data->non_trigger.vf_pf_channel.msg_addr_hi); + + /* make sure the address is written before FW accesses it */ + wmb(); + + /* Trigger the PF FW */ + writeb_relaxed(1, &zone_data->trigger.vf_pf_channel.addr_valid); + + mmiowb(); + + /* Wait for PF to complete */ + while ((tout >= 0) && (!*done)) { + msleep(interval); + tout -= 1; + + /* progress indicator - HV can take its own sweet time in + * answering VFs... + */ + DP_CONT(BNX2X_MSG_IOV, "."); + } + + if (!*done) { + BNX2X_ERR("PF response has timed out\n"); + return -EAGAIN; + } + DP(BNX2X_MSG_SP, "Got a response from PF\n"); + return 0; +} + +static int bnx2x_get_vf_id(struct bnx2x *bp, u32 *vf_id) +{ + u32 me_reg; + int tout = 10, interval = 100; /* Wait for 1 sec */ + + do { + /* pxp traps vf read of doorbells and returns me reg value */ + me_reg = readl(bp->doorbells); + if (GOOD_ME_REG(me_reg)) + break; + + msleep(interval); + + BNX2X_ERR("Invalid ME register value: 0x%08x\n. Is pf driver up?", + me_reg); + } while (tout-- > 0); + + if (!GOOD_ME_REG(me_reg)) { + BNX2X_ERR("Invalid ME register value: 0x%08x\n", me_reg); + return -EINVAL; + } + + DP(BNX2X_MSG_IOV, "valid ME register value: 0x%08x\n", me_reg); + + *vf_id = (me_reg & ME_REG_VF_NUM_MASK) >> ME_REG_VF_NUM_SHIFT; + + return 0; +} + +int bnx2x_vfpf_acquire(struct bnx2x *bp, u8 tx_count, u8 rx_count) +{ + int rc = 0, attempts = 0; + struct vfpf_acquire_tlv *req = &bp->vf2pf_mbox->req.acquire; + struct pfvf_acquire_resp_tlv *resp = &bp->vf2pf_mbox->resp.acquire_resp; + struct vfpf_port_phys_id_resp_tlv *phys_port_resp; + struct vfpf_fp_hsi_resp_tlv *fp_hsi_resp; + u32 vf_id; + bool resources_acquired = false; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_ACQUIRE, sizeof(*req)); + + if (bnx2x_get_vf_id(bp, &vf_id)) { + rc = -EAGAIN; + goto out; + } + + req->vfdev_info.vf_id = vf_id; + req->vfdev_info.vf_os = 0; + req->vfdev_info.fp_hsi_ver = ETH_FP_HSI_VERSION; + + req->resc_request.num_rxqs = rx_count; + req->resc_request.num_txqs = tx_count; + req->resc_request.num_sbs = bp->igu_sb_cnt; + req->resc_request.num_mac_filters = VF_ACQUIRE_MAC_FILTERS; + req->resc_request.num_mc_filters = VF_ACQUIRE_MC_FILTERS; + req->resc_request.num_vlan_filters = VF_ACQUIRE_VLAN_FILTERS; + + /* pf 2 vf bulletin board address */ + req->bulletin_addr = bp->pf2vf_bulletin_mapping; + + /* Request physical port identifier */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, + CHANNEL_TLV_PHYS_PORT_ID, sizeof(struct channel_tlv)); + + /* Bulletin support for bulletin board with length > legacy length */ + req->vfdev_info.caps |= VF_CAP_SUPPORT_EXT_BULLETIN; + /* vlan filtering is supported */ + req->vfdev_info.caps |= VF_CAP_SUPPORT_VLAN_FILTER; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, + req->first_tlv.tl.length + sizeof(struct channel_tlv), + CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + while (!resources_acquired) { + DP(BNX2X_MSG_SP, "attempting to acquire resources\n"); + + /* send acquire request */ + rc = bnx2x_send_msg2pf(bp, + &resp->hdr.status, + bp->vf2pf_mbox_mapping); + + /* PF timeout */ + if (rc) + goto out; + + /* copy acquire response from buffer to bp */ + memcpy(&bp->acquire_resp, resp, sizeof(bp->acquire_resp)); + + attempts++; + + /* test whether the PF accepted our request. If not, humble + * the request and try again. + */ + if (bp->acquire_resp.hdr.status == PFVF_STATUS_SUCCESS) { + DP(BNX2X_MSG_SP, "resources acquired\n"); + resources_acquired = true; + } else if (bp->acquire_resp.hdr.status == + PFVF_STATUS_NO_RESOURCE && + attempts < VF_ACQUIRE_THRESH) { + DP(BNX2X_MSG_SP, + "PF unwilling to fulfill resource request. Try PF recommended amount\n"); + + /* humble our request */ + req->resc_request.num_txqs = + min(req->resc_request.num_txqs, + bp->acquire_resp.resc.num_txqs); + req->resc_request.num_rxqs = + min(req->resc_request.num_rxqs, + bp->acquire_resp.resc.num_rxqs); + req->resc_request.num_sbs = + min(req->resc_request.num_sbs, + bp->acquire_resp.resc.num_sbs); + req->resc_request.num_mac_filters = + min(req->resc_request.num_mac_filters, + bp->acquire_resp.resc.num_mac_filters); + req->resc_request.num_vlan_filters = + min(req->resc_request.num_vlan_filters, + bp->acquire_resp.resc.num_vlan_filters); + req->resc_request.num_mc_filters = + min(req->resc_request.num_mc_filters, + bp->acquire_resp.resc.num_mc_filters); + + /* Clear response buffer */ + memset(&bp->vf2pf_mbox->resp, 0, + sizeof(union pfvf_tlvs)); + } else { + /* Determine reason of PF failure of acquire process */ + fp_hsi_resp = bnx2x_search_tlv_list(bp, resp, + CHANNEL_TLV_FP_HSI_SUPPORT); + if (fp_hsi_resp && !fp_hsi_resp->is_supported) + BNX2X_ERR("Old hypervisor - doesn't support current fastpath HSI version; Need to downgrade VF driver [or upgrade hypervisor]\n"); + else + BNX2X_ERR("Failed to get the requested amount of resources: %d. Breaking...\n", + bp->acquire_resp.hdr.status); + rc = -EAGAIN; + goto out; + } + } + + /* Retrieve physical port id (if possible) */ + phys_port_resp = (struct vfpf_port_phys_id_resp_tlv *) + bnx2x_search_tlv_list(bp, resp, + CHANNEL_TLV_PHYS_PORT_ID); + if (phys_port_resp) { + memcpy(bp->phys_port_id, phys_port_resp->id, ETH_ALEN); + bp->flags |= HAS_PHYS_PORT_ID; + } + + /* Old Hypevisors might not even support the FP_HSI_SUPPORT TLV. + * If that's the case, we need to make certain required FW was + * supported by such a hypervisor [i.e., v0-v2]. + */ + fp_hsi_resp = bnx2x_search_tlv_list(bp, resp, + CHANNEL_TLV_FP_HSI_SUPPORT); + if (!fp_hsi_resp && (ETH_FP_HSI_VERSION > ETH_FP_HSI_VER_2)) { + BNX2X_ERR("Old hypervisor - need to downgrade VF's driver\n"); + + /* Since acquire succeeded on the PF side, we need to send a + * release message in order to allow future probes. + */ + bnx2x_vfpf_finalize(bp, &req->first_tlv); + bnx2x_vfpf_release(bp); + + rc = -EINVAL; + goto out; + } + + /* get HW info */ + bp->common.chip_id |= (bp->acquire_resp.pfdev_info.chip_num & 0xffff); + bp->link_params.chip_id = bp->common.chip_id; + bp->db_size = bp->acquire_resp.pfdev_info.db_size; + bp->common.int_block = INT_BLOCK_IGU; + bp->common.chip_port_mode = CHIP_2_PORT_MODE; + bp->igu_dsb_id = -1; + bp->mf_ov = 0; + bp->mf_mode = 0; + bp->common.flash_size = 0; + bp->flags |= + NO_WOL_FLAG | NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG | NO_FCOE_FLAG; + bp->igu_sb_cnt = bp->acquire_resp.resc.num_sbs; + bp->igu_base_sb = bp->acquire_resp.resc.hw_sbs[0].hw_sb_id; + bp->vlan_credit = bp->acquire_resp.resc.num_vlan_filters; + + strlcpy(bp->fw_ver, bp->acquire_resp.pfdev_info.fw_ver, + sizeof(bp->fw_ver)); + + if (is_valid_ether_addr(bp->acquire_resp.resc.current_mac_addr)) + memcpy(bp->dev->dev_addr, + bp->acquire_resp.resc.current_mac_addr, + ETH_ALEN); + +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + return rc; +} + +int bnx2x_vfpf_release(struct bnx2x *bp) +{ + struct vfpf_release_tlv *req = &bp->vf2pf_mbox->req.release; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + u32 rc, vf_id; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_RELEASE, sizeof(*req)); + + if (bnx2x_get_vf_id(bp, &vf_id)) { + rc = -EAGAIN; + goto out; + } + + req->vf_id = vf_id; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send release request */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) + /* PF timeout */ + goto out; + + if (resp->hdr.status == PFVF_STATUS_SUCCESS) { + /* PF released us */ + DP(BNX2X_MSG_SP, "vf released\n"); + } else { + /* PF reports error */ + BNX2X_ERR("PF failed our release request - are we out of sync? Response status: %d\n", + resp->hdr.status); + rc = -EAGAIN; + goto out; + } +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +/* Tell PF about SB addresses */ +int bnx2x_vfpf_init(struct bnx2x *bp) +{ + struct vfpf_init_tlv *req = &bp->vf2pf_mbox->req.init; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc, i; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_INIT, sizeof(*req)); + + /* status blocks */ + for_each_eth_queue(bp, i) + req->sb_addr[i] = (dma_addr_t)bnx2x_fp(bp, i, + status_blk_mapping); + + /* statistics - requests only supports single queue for now */ + req->stats_addr = bp->fw_stats_data_mapping + + offsetof(struct bnx2x_fw_stats_data, queue_stats); + + req->stats_stride = sizeof(struct per_queue_stats); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + goto out; + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("INIT VF failed: %d. Breaking...\n", + resp->hdr.status); + rc = -EAGAIN; + goto out; + } + + DP(BNX2X_MSG_SP, "INIT VF Succeeded\n"); +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +/* CLOSE VF - opposite to INIT_VF */ +void bnx2x_vfpf_close_vf(struct bnx2x *bp) +{ + struct vfpf_close_tlv *req = &bp->vf2pf_mbox->req.close; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int i, rc; + u32 vf_id; + + /* If we haven't got a valid VF id, there is no sense to + * continue with sending messages + */ + if (bnx2x_get_vf_id(bp, &vf_id)) + goto free_irq; + + /* Close the queues */ + for_each_queue(bp, i) + bnx2x_vfpf_teardown_queue(bp, i); + + /* remove mac */ + bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, bp->fp->index, false); + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_CLOSE, sizeof(*req)); + + req->vf_id = vf_id; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) + BNX2X_ERR("Sending CLOSE failed. rc was: %d\n", rc); + + else if (resp->hdr.status != PFVF_STATUS_SUCCESS) + BNX2X_ERR("Sending CLOSE failed: pf response was %d\n", + resp->hdr.status); + + bnx2x_vfpf_finalize(bp, &req->first_tlv); + +free_irq: + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + + /* Release IRQs */ + bnx2x_free_irq(bp); +} + +static void bnx2x_leading_vfq_init(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_queue *q) +{ + u8 cl_id = vfq_cl_id(vf, q); + u8 func_id = FW_VF_HANDLE(vf->abs_vfid); + + /* mac */ + bnx2x_init_mac_obj(bp, &q->mac_obj, + cl_id, q->cid, func_id, + bnx2x_vf_sp(bp, vf, mac_rdata), + bnx2x_vf_sp_map(bp, vf, mac_rdata), + BNX2X_FILTER_MAC_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX, + &vf->vf_macs_pool); + /* vlan */ + bnx2x_init_vlan_obj(bp, &q->vlan_obj, + cl_id, q->cid, func_id, + bnx2x_vf_sp(bp, vf, vlan_rdata), + bnx2x_vf_sp_map(bp, vf, vlan_rdata), + BNX2X_FILTER_VLAN_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX, + &vf->vf_vlans_pool); + /* vlan-mac */ + bnx2x_init_vlan_mac_obj(bp, &q->vlan_mac_obj, + cl_id, q->cid, func_id, + bnx2x_vf_sp(bp, vf, vlan_mac_rdata), + bnx2x_vf_sp_map(bp, vf, vlan_mac_rdata), + BNX2X_FILTER_VLAN_MAC_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX, + &vf->vf_macs_pool, + &vf->vf_vlans_pool); + /* mcast */ + bnx2x_init_mcast_obj(bp, &vf->mcast_obj, cl_id, + q->cid, func_id, func_id, + bnx2x_vf_sp(bp, vf, mcast_rdata), + bnx2x_vf_sp_map(bp, vf, mcast_rdata), + BNX2X_FILTER_MCAST_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX); + + /* rss */ + bnx2x_init_rss_config_obj(bp, &vf->rss_conf_obj, cl_id, q->cid, + func_id, func_id, + bnx2x_vf_sp(bp, vf, rss_rdata), + bnx2x_vf_sp_map(bp, vf, rss_rdata), + BNX2X_FILTER_RSS_CONF_PENDING, + &vf->filter_state, + BNX2X_OBJ_TYPE_RX_TX); + + vf->leading_rss = cl_id; + q->is_leading = true; + q->sp_initialized = true; +} + +/* ask the pf to open a queue for the vf */ +int bnx2x_vfpf_setup_q(struct bnx2x *bp, struct bnx2x_fastpath *fp, + bool is_leading) +{ + struct vfpf_setup_q_tlv *req = &bp->vf2pf_mbox->req.setup_q; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + u8 fp_idx = fp->index; + u16 tpa_agg_size = 0, flags = 0; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SETUP_Q, sizeof(*req)); + + /* select tpa mode to request */ + if (fp->mode != TPA_MODE_DISABLED) { + flags |= VFPF_QUEUE_FLG_TPA; + flags |= VFPF_QUEUE_FLG_TPA_IPV6; + if (fp->mode == TPA_MODE_GRO) + flags |= VFPF_QUEUE_FLG_TPA_GRO; + tpa_agg_size = TPA_AGG_SIZE; + } + + if (is_leading) + flags |= VFPF_QUEUE_FLG_LEADING_RSS; + + /* calculate queue flags */ + flags |= VFPF_QUEUE_FLG_STATS; + flags |= VFPF_QUEUE_FLG_CACHE_ALIGN; + flags |= VFPF_QUEUE_FLG_VLAN; + + /* Common */ + req->vf_qid = fp_idx; + req->param_valid = VFPF_RXQ_VALID | VFPF_TXQ_VALID; + + /* Rx */ + req->rxq.rcq_addr = fp->rx_comp_mapping; + req->rxq.rcq_np_addr = fp->rx_comp_mapping + BCM_PAGE_SIZE; + req->rxq.rxq_addr = fp->rx_desc_mapping; + req->rxq.sge_addr = fp->rx_sge_mapping; + req->rxq.vf_sb = fp_idx; + req->rxq.sb_index = HC_INDEX_ETH_RX_CQ_CONS; + req->rxq.hc_rate = bp->rx_ticks ? 1000000/bp->rx_ticks : 0; + req->rxq.mtu = bp->dev->mtu; + req->rxq.buf_sz = fp->rx_buf_size; + req->rxq.sge_buf_sz = BCM_PAGE_SIZE * PAGES_PER_SGE; + req->rxq.tpa_agg_sz = tpa_agg_size; + req->rxq.max_sge_pkt = SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT; + req->rxq.max_sge_pkt = ((req->rxq.max_sge_pkt + PAGES_PER_SGE - 1) & + (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; + req->rxq.flags = flags; + req->rxq.drop_flags = 0; + req->rxq.cache_line_log = BNX2X_RX_ALIGN_SHIFT; + req->rxq.stat_id = -1; /* No stats at the moment */ + + /* Tx */ + req->txq.txq_addr = fp->txdata_ptr[FIRST_TX_COS_INDEX]->tx_desc_mapping; + req->txq.vf_sb = fp_idx; + req->txq.sb_index = HC_INDEX_ETH_TX_CQ_CONS_COS0; + req->txq.hc_rate = bp->tx_ticks ? 1000000/bp->tx_ticks : 0; + req->txq.flags = flags; + req->txq.traffic_type = LLFC_TRAFFIC_TYPE_NW; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + BNX2X_ERR("Sending SETUP_Q message for queue[%d] failed!\n", + fp_idx); + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Status of SETUP_Q for queue[%d] is %d\n", + fp_idx, resp->hdr.status); + rc = -EINVAL; + } + + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +static int bnx2x_vfpf_teardown_queue(struct bnx2x *bp, int qidx) +{ + struct vfpf_q_op_tlv *req = &bp->vf2pf_mbox->req.q_op; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_TEARDOWN_Q, + sizeof(*req)); + + req->vf_qid = qidx; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + + if (rc) { + BNX2X_ERR("Sending TEARDOWN for queue %d failed: %d\n", qidx, + rc); + goto out; + } + + /* PF failed the transaction */ + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("TEARDOWN for queue %d failed: %d\n", qidx, + resp->hdr.status); + rc = -EINVAL; + } + +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +/* request pf to add a mac for the vf */ +int bnx2x_vfpf_config_mac(struct bnx2x *bp, u8 *addr, u8 vf_qid, bool set) +{ + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + struct pf_vf_bulletin_content bulletin = bp->pf2vf_bulletin->content; + int rc = 0; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + req->flags = VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED; + req->vf_qid = vf_qid; + req->n_mac_vlan_filters = 1; + + req->filters[0].flags = VFPF_Q_FILTER_DEST_MAC_VALID; + if (set) + req->filters[0].flags |= VFPF_Q_FILTER_SET; + + /* sample bulletin board for new mac */ + bnx2x_sample_bulletin(bp); + + /* copy mac from device to request */ + memcpy(req->filters[0].mac, addr, ETH_ALEN); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("failed to send message to pf. rc was %d\n", rc); + goto out; + } + + /* failure may mean PF was configured with a new mac for us */ + while (resp->hdr.status == PFVF_STATUS_FAILURE) { + DP(BNX2X_MSG_IOV, + "vfpf SET MAC failed. Check bulletin board for new posts\n"); + + /* copy mac from bulletin to device */ + memcpy(bp->dev->dev_addr, bulletin.mac, ETH_ALEN); + + /* check if bulletin board was updated */ + if (bnx2x_sample_bulletin(bp) == PFVF_BULLETIN_UPDATED) { + /* copy mac from device to request */ + memcpy(req->filters[0].mac, bp->dev->dev_addr, + ETH_ALEN); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, + bp->vf2pf_mbox_mapping); + } else { + /* no new info in bulletin */ + break; + } + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("vfpf SET MAC failed: %d\n", resp->hdr.status); + rc = -EINVAL; + } +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +/* request pf to config rss table for vf queues*/ +int bnx2x_vfpf_config_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *params) +{ + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + struct vfpf_rss_tlv *req = &bp->vf2pf_mbox->req.update_rss; + int rc = 0; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_UPDATE_RSS, + sizeof(*req)); + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + memcpy(req->ind_table, params->ind_table, T_ETH_INDIRECTION_TABLE_SIZE); + memcpy(req->rss_key, params->rss_key, sizeof(params->rss_key)); + req->ind_table_size = T_ETH_INDIRECTION_TABLE_SIZE; + req->rss_key_size = T_ETH_RSS_KEY; + req->rss_result_mask = params->rss_result_mask; + + /* flags handled individually for backward/forward compatibility */ + if (params->rss_flags & (1 << BNX2X_RSS_MODE_DISABLED)) + req->rss_flags |= VFPF_RSS_MODE_DISABLED; + if (params->rss_flags & (1 << BNX2X_RSS_MODE_REGULAR)) + req->rss_flags |= VFPF_RSS_MODE_REGULAR; + if (params->rss_flags & (1 << BNX2X_RSS_SET_SRCH)) + req->rss_flags |= VFPF_RSS_SET_SRCH; + if (params->rss_flags & (1 << BNX2X_RSS_IPV4)) + req->rss_flags |= VFPF_RSS_IPV4; + if (params->rss_flags & (1 << BNX2X_RSS_IPV4_TCP)) + req->rss_flags |= VFPF_RSS_IPV4_TCP; + if (params->rss_flags & (1 << BNX2X_RSS_IPV4_UDP)) + req->rss_flags |= VFPF_RSS_IPV4_UDP; + if (params->rss_flags & (1 << BNX2X_RSS_IPV6)) + req->rss_flags |= VFPF_RSS_IPV6; + if (params->rss_flags & (1 << BNX2X_RSS_IPV6_TCP)) + req->rss_flags |= VFPF_RSS_IPV6_TCP; + if (params->rss_flags & (1 << BNX2X_RSS_IPV6_UDP)) + req->rss_flags |= VFPF_RSS_IPV6_UDP; + + DP(BNX2X_MSG_IOV, "rss flags %x\n", req->rss_flags); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("failed to send message to pf. rc was %d\n", rc); + goto out; + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + /* Since older drivers don't support this feature (and VF has + * no way of knowing other than failing this), don't propagate + * an error in this case. + */ + DP(BNX2X_MSG_IOV, + "Failed to send rss message to PF over VF-PF channel [%d]\n", + resp->hdr.status); + } +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +int bnx2x_vfpf_set_mcast(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc = 0, i = 0; + struct netdev_hw_addr *ha; + + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); + return -EINVAL; + } + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + /* Get Rx mode requested */ + DP(NETIF_MSG_IFUP, "dev->flags = %x\n", dev->flags); + + /* We support PFVF_MAX_MULTICAST_PER_VF mcast addresses tops */ + if (netdev_mc_count(dev) > PFVF_MAX_MULTICAST_PER_VF) { + DP(NETIF_MSG_IFUP, + "VF supports not more than %d multicast MAC addresses\n", + PFVF_MAX_MULTICAST_PER_VF); + rc = -EINVAL; + goto out; + } + + netdev_for_each_mc_addr(ha, dev) { + DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n", + bnx2x_mc_addr(ha)); + memcpy(req->multicast[i], bnx2x_mc_addr(ha), ETH_ALEN); + i++; + } + + req->n_multicast = i; + req->flags |= VFPF_SET_Q_FILTERS_MULTICAST_CHANGED; + req->vf_qid = 0; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("Sending a message failed: %d\n", rc); + goto out; + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Set Rx mode/multicast failed: %d\n", + resp->hdr.status); + rc = -EINVAL; + } +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +/* request pf to add a vlan for the vf */ +int bnx2x_vfpf_update_vlan(struct bnx2x *bp, u16 vid, u8 vf_qid, bool add) +{ + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc = 0; + + if (!(bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER)) { + DP(BNX2X_MSG_IOV, "HV does not support vlan filtering\n"); + return 0; + } + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + req->flags = VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED; + req->vf_qid = vf_qid; + req->n_mac_vlan_filters = 1; + + req->filters[0].flags = VFPF_Q_FILTER_VLAN_TAG_VALID; + + if (add) + req->filters[0].flags |= VFPF_Q_FILTER_SET; + + /* sample bulletin board for hypervisor vlan */ + bnx2x_sample_bulletin(bp); + + if (bp->shadow_bulletin.content.valid_bitmap & 1 << VLAN_VALID) { + BNX2X_ERR("Hypervisor will dicline the request, avoiding\n"); + rc = -EINVAL; + goto out; + } + + req->filters[0].vlan_tag = vid; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + /* send message to pf */ + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) { + BNX2X_ERR("failed to send message to pf. rc was %d\n", rc); + goto out; + } + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("vfpf %s VLAN %d failed\n", add ? "add" : "del", + vid); + rc = -EINVAL; + } +out: + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +int bnx2x_vfpf_storm_rx_mode(struct bnx2x *bp) +{ + int mode = bp->rx_mode; + struct vfpf_set_q_filters_tlv *req = &bp->vf2pf_mbox->req.set_q_filters; + struct pfvf_general_resp_tlv *resp = &bp->vf2pf_mbox->resp.general_resp; + int rc; + + /* clear mailbox and prep first tlv */ + bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SET_Q_FILTERS, + sizeof(*req)); + + DP(NETIF_MSG_IFUP, "Rx mode is %d\n", mode); + + /* Ignore everything accept MODE_NONE */ + if (mode == BNX2X_RX_MODE_NONE) { + req->rx_mask = VFPF_RX_MASK_ACCEPT_NONE; + } else { + /* Current PF driver will not look at the specific flags, + * but they are required when working with older drivers on hv. + */ + req->rx_mask = VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST; + req->rx_mask |= VFPF_RX_MASK_ACCEPT_BROADCAST; + if (mode == BNX2X_RX_MODE_PROMISC) + req->rx_mask |= VFPF_RX_MASK_ACCEPT_ANY_VLAN; + } + + if (bp->accept_any_vlan) + req->rx_mask |= VFPF_RX_MASK_ACCEPT_ANY_VLAN; + + req->flags |= VFPF_SET_Q_FILTERS_RX_MASK_CHANGED; + req->vf_qid = 0; + + /* add list termination tlv */ + bnx2x_add_tlv(bp, req, req->first_tlv.tl.length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* output tlvs list */ + bnx2x_dp_tlv_list(bp, req); + + rc = bnx2x_send_msg2pf(bp, &resp->hdr.status, bp->vf2pf_mbox_mapping); + if (rc) + BNX2X_ERR("Sending a message failed: %d\n", rc); + + if (resp->hdr.status != PFVF_STATUS_SUCCESS) { + BNX2X_ERR("Set Rx mode failed: %d\n", resp->hdr.status); + rc = -EINVAL; + } + + bnx2x_vfpf_finalize(bp, &req->first_tlv); + + return rc; +} + +/* General service functions */ +static void storm_memset_vf_mbx_ack(struct bnx2x *bp, u16 abs_fid) +{ + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_VF_PF_CHANNEL_STATE_OFFSET(abs_fid); + + REG_WR8(bp, addr, VF_PF_CHANNEL_STATE_READY); +} + +static void storm_memset_vf_mbx_valid(struct bnx2x *bp, u16 abs_fid) +{ + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_VF_PF_CHANNEL_VALID_OFFSET(abs_fid); + + REG_WR8(bp, addr, 1); +} + +/* enable vf_pf mailbox (aka vf-pf-channel) */ +void bnx2x_vf_enable_mbx(struct bnx2x *bp, u8 abs_vfid) +{ + bnx2x_vf_flr_clnup_epilog(bp, abs_vfid); + + /* enable the mailbox in the FW */ + storm_memset_vf_mbx_ack(bp, abs_vfid); + storm_memset_vf_mbx_valid(bp, abs_vfid); + + /* enable the VF access to the mailbox */ + bnx2x_vf_enable_access(bp, abs_vfid); +} + +/* this works only on !E1h */ +static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf, + dma_addr_t pf_addr, u8 vfid, u32 vf_addr_hi, + u32 vf_addr_lo, u32 len32) +{ + struct dmae_command dmae; + + if (CHIP_IS_E1x(bp)) { + BNX2X_ERR("Chip revision does not support VFs\n"); + return DMAE_NOT_RDY; + } + + if (!bp->dmae_ready) { + BNX2X_ERR("DMAE is not ready, can not copy\n"); + return DMAE_NOT_RDY; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_PCI); + + if (from_vf) { + dmae.opcode_iov = (vfid << DMAE_COMMAND_SRC_VFID_SHIFT) | + (DMAE_SRC_VF << DMAE_COMMAND_SRC_VFPF_SHIFT) | + (DMAE_DST_PF << DMAE_COMMAND_DST_VFPF_SHIFT); + + dmae.opcode |= (DMAE_C_DST << DMAE_COMMAND_C_FUNC_SHIFT); + + dmae.src_addr_lo = vf_addr_lo; + dmae.src_addr_hi = vf_addr_hi; + dmae.dst_addr_lo = U64_LO(pf_addr); + dmae.dst_addr_hi = U64_HI(pf_addr); + } else { + dmae.opcode_iov = (vfid << DMAE_COMMAND_DST_VFID_SHIFT) | + (DMAE_DST_VF << DMAE_COMMAND_DST_VFPF_SHIFT) | + (DMAE_SRC_PF << DMAE_COMMAND_SRC_VFPF_SHIFT); + + dmae.opcode |= (DMAE_C_SRC << DMAE_COMMAND_C_FUNC_SHIFT); + + dmae.src_addr_lo = U64_LO(pf_addr); + dmae.src_addr_hi = U64_HI(pf_addr); + dmae.dst_addr_lo = vf_addr_lo; + dmae.dst_addr_hi = vf_addr_hi; + } + dmae.len = len32; + + /* issue the command and wait for completion */ + return bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); +} + +static void bnx2x_vf_mbx_resp_single_tlv(struct bnx2x *bp, + struct bnx2x_virtf *vf) +{ + struct bnx2x_vf_mbx *mbx = BP_VF_MBX(bp, vf->index); + u16 length, type; + + /* prepare response */ + type = mbx->first_tlv.tl.type; + length = type == CHANNEL_TLV_ACQUIRE ? + sizeof(struct pfvf_acquire_resp_tlv) : + sizeof(struct pfvf_general_resp_tlv); + bnx2x_add_tlv(bp, &mbx->msg->resp, 0, type, length); + bnx2x_add_tlv(bp, &mbx->msg->resp, length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); +} + +static void bnx2x_vf_mbx_resp_send_msg(struct bnx2x *bp, + struct bnx2x_virtf *vf, + int vf_rc) +{ + struct bnx2x_vf_mbx *mbx = BP_VF_MBX(bp, vf->index); + struct pfvf_general_resp_tlv *resp = &mbx->msg->resp.general_resp; + dma_addr_t pf_addr; + u64 vf_addr; + int rc; + + bnx2x_dp_tlv_list(bp, resp); + DP(BNX2X_MSG_IOV, "mailbox vf address hi 0x%x, lo 0x%x, offset 0x%x\n", + mbx->vf_addr_hi, mbx->vf_addr_lo, mbx->first_tlv.resp_msg_offset); + + resp->hdr.status = bnx2x_pfvf_status_codes(vf_rc); + + /* send response */ + vf_addr = HILO_U64(mbx->vf_addr_hi, mbx->vf_addr_lo) + + mbx->first_tlv.resp_msg_offset; + pf_addr = mbx->msg_mapping + + offsetof(struct bnx2x_vf_mbx_msg, resp); + + /* Copy the response buffer. The first u64 is written afterwards, as + * the vf is sensitive to the header being written + */ + vf_addr += sizeof(u64); + pf_addr += sizeof(u64); + rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, vf->abs_vfid, + U64_HI(vf_addr), + U64_LO(vf_addr), + (sizeof(union pfvf_tlvs) - sizeof(u64))/4); + if (rc) { + BNX2X_ERR("Failed to copy response body to VF %d\n", + vf->abs_vfid); + goto mbx_error; + } + vf_addr -= sizeof(u64); + pf_addr -= sizeof(u64); + + /* ack the FW */ + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + mmiowb(); + + /* copy the response header including status-done field, + * must be last dmae, must be after FW is acked + */ + rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, vf->abs_vfid, + U64_HI(vf_addr), + U64_LO(vf_addr), + sizeof(u64)/4); + + /* unlock channel mutex */ + bnx2x_unlock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); + + if (rc) { + BNX2X_ERR("Failed to copy response status to VF %d\n", + vf->abs_vfid); + goto mbx_error; + } + return; + +mbx_error: + bnx2x_vf_release(bp, vf); +} + +static void bnx2x_vf_mbx_resp(struct bnx2x *bp, + struct bnx2x_virtf *vf, + int rc) +{ + bnx2x_vf_mbx_resp_single_tlv(bp, vf); + bnx2x_vf_mbx_resp_send_msg(bp, vf, rc); +} + +static void bnx2x_vf_mbx_resp_phys_port(struct bnx2x *bp, + struct bnx2x_virtf *vf, + void *buffer, + u16 *offset) +{ + struct vfpf_port_phys_id_resp_tlv *port_id; + + if (!(bp->flags & HAS_PHYS_PORT_ID)) + return; + + bnx2x_add_tlv(bp, buffer, *offset, CHANNEL_TLV_PHYS_PORT_ID, + sizeof(struct vfpf_port_phys_id_resp_tlv)); + + port_id = (struct vfpf_port_phys_id_resp_tlv *) + (((u8 *)buffer) + *offset); + memcpy(port_id->id, bp->phys_port_id, ETH_ALEN); + + /* Offset should continue representing the offset to the tail + * of TLV data (outside this function scope) + */ + *offset += sizeof(struct vfpf_port_phys_id_resp_tlv); +} + +static void bnx2x_vf_mbx_resp_fp_hsi_ver(struct bnx2x *bp, + struct bnx2x_virtf *vf, + void *buffer, + u16 *offset) +{ + struct vfpf_fp_hsi_resp_tlv *fp_hsi; + + bnx2x_add_tlv(bp, buffer, *offset, CHANNEL_TLV_FP_HSI_SUPPORT, + sizeof(struct vfpf_fp_hsi_resp_tlv)); + + fp_hsi = (struct vfpf_fp_hsi_resp_tlv *) + (((u8 *)buffer) + *offset); + fp_hsi->is_supported = (vf->fp_hsi > ETH_FP_HSI_VERSION) ? 0 : 1; + + /* Offset should continue representing the offset to the tail + * of TLV data (outside this function scope) + */ + *offset += sizeof(struct vfpf_fp_hsi_resp_tlv); +} + +static void bnx2x_vf_mbx_acquire_resp(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx, int vfop_status) +{ + int i; + struct pfvf_acquire_resp_tlv *resp = &mbx->msg->resp.acquire_resp; + struct pf_vf_resc *resc = &resp->resc; + u8 status = bnx2x_pfvf_status_codes(vfop_status); + u16 length; + + memset(resp, 0, sizeof(*resp)); + + /* fill in pfdev info */ + resp->pfdev_info.chip_num = bp->common.chip_id; + resp->pfdev_info.db_size = bp->db_size; + resp->pfdev_info.indices_per_sb = HC_SB_MAX_INDICES_E2; + resp->pfdev_info.pf_cap = (PFVF_CAP_RSS | + PFVF_CAP_TPA | + PFVF_CAP_TPA_UPDATE | + PFVF_CAP_VLAN_FILTER); + bnx2x_fill_fw_str(bp, resp->pfdev_info.fw_ver, + sizeof(resp->pfdev_info.fw_ver)); + + if (status == PFVF_STATUS_NO_RESOURCE || + status == PFVF_STATUS_SUCCESS) { + /* set resources numbers, if status equals NO_RESOURCE these + * are max possible numbers + */ + resc->num_rxqs = vf_rxq_count(vf) ? : + bnx2x_vf_max_queue_cnt(bp, vf); + resc->num_txqs = vf_txq_count(vf) ? : + bnx2x_vf_max_queue_cnt(bp, vf); + resc->num_sbs = vf_sb_count(vf); + resc->num_mac_filters = vf_mac_rules_cnt(vf); + resc->num_vlan_filters = vf_vlan_rules_cnt(vf); + resc->num_mc_filters = 0; + + if (status == PFVF_STATUS_SUCCESS) { + /* fill in the allocated resources */ + struct pf_vf_bulletin_content *bulletin = + BP_VF_BULLETIN(bp, vf->index); + + for_each_vfq(vf, i) + resc->hw_qid[i] = + vfq_qzone_id(vf, vfq_get(vf, i)); + + for_each_vf_sb(vf, i) { + resc->hw_sbs[i].hw_sb_id = vf_igu_sb(vf, i); + resc->hw_sbs[i].sb_qid = vf_hc_qzone(vf, i); + } + + /* if a mac has been set for this vf, supply it */ + if (bulletin->valid_bitmap & 1 << MAC_ADDR_VALID) { + memcpy(resc->current_mac_addr, bulletin->mac, + ETH_ALEN); + } + } + } + + DP(BNX2X_MSG_IOV, "VF[%d] ACQUIRE_RESPONSE: pfdev_info- chip_num=0x%x, db_size=%d, idx_per_sb=%d, pf_cap=0x%x\n" + "resources- n_rxq-%d, n_txq-%d, n_sbs-%d, n_macs-%d, n_vlans-%d, n_mcs-%d, fw_ver: '%s'\n", + vf->abs_vfid, + resp->pfdev_info.chip_num, + resp->pfdev_info.db_size, + resp->pfdev_info.indices_per_sb, + resp->pfdev_info.pf_cap, + resc->num_rxqs, + resc->num_txqs, + resc->num_sbs, + resc->num_mac_filters, + resc->num_vlan_filters, + resc->num_mc_filters, + resp->pfdev_info.fw_ver); + + DP_CONT(BNX2X_MSG_IOV, "hw_qids- [ "); + for (i = 0; i < vf_rxq_count(vf); i++) + DP_CONT(BNX2X_MSG_IOV, "%d ", resc->hw_qid[i]); + DP_CONT(BNX2X_MSG_IOV, "], sb_info- [ "); + for (i = 0; i < vf_sb_count(vf); i++) + DP_CONT(BNX2X_MSG_IOV, "%d:%d ", + resc->hw_sbs[i].hw_sb_id, + resc->hw_sbs[i].sb_qid); + DP_CONT(BNX2X_MSG_IOV, "]\n"); + + /* prepare response */ + length = sizeof(struct pfvf_acquire_resp_tlv); + bnx2x_add_tlv(bp, &mbx->msg->resp, 0, CHANNEL_TLV_ACQUIRE, length); + + /* Handle possible VF requests for physical port identifiers. + * 'length' should continue to indicate the offset of the first empty + * place in the buffer (i.e., where next TLV should be inserted) + */ + if (bnx2x_search_tlv_list(bp, &mbx->msg->req, + CHANNEL_TLV_PHYS_PORT_ID)) + bnx2x_vf_mbx_resp_phys_port(bp, vf, &mbx->msg->resp, &length); + + /* `New' vfs will want to know if fastpath HSI is supported, since + * if that's not the case they could print into system log the fact + * the driver version must be updated. + */ + bnx2x_vf_mbx_resp_fp_hsi_ver(bp, vf, &mbx->msg->resp, &length); + + bnx2x_add_tlv(bp, &mbx->msg->resp, length, CHANNEL_TLV_LIST_END, + sizeof(struct channel_list_end_tlv)); + + /* send the response */ + bnx2x_vf_mbx_resp_send_msg(bp, vf, vfop_status); +} + +static bool bnx2x_vf_mbx_is_windows_vm(struct bnx2x *bp, + struct vfpf_acquire_tlv *acquire) +{ + /* Windows driver does one of three things: + * 1. Old driver doesn't have bulletin board address set. + * 2. 'Middle' driver sends mc_num == 32. + * 3. New driver sets the OS field. + */ + if (!acquire->bulletin_addr || + acquire->resc_request.num_mc_filters == 32 || + ((acquire->vfdev_info.vf_os & VF_OS_MASK) == + VF_OS_WINDOWS)) + return true; + + return false; +} + +static int bnx2x_vf_mbx_acquire_chk_dorq(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + /* Linux drivers which correctly set the doorbell size also + * send a physical port request + */ + if (bnx2x_search_tlv_list(bp, &mbx->msg->req, + CHANNEL_TLV_PHYS_PORT_ID)) + return 0; + + /* Issue does not exist in windows VMs */ + if (bnx2x_vf_mbx_is_windows_vm(bp, &mbx->msg->req.acquire)) + return 0; + + return -EOPNOTSUPP; +} + +static void bnx2x_vf_mbx_acquire(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int rc; + struct vfpf_acquire_tlv *acquire = &mbx->msg->req.acquire; + + /* log vfdef info */ + DP(BNX2X_MSG_IOV, + "VF[%d] ACQUIRE: vfdev_info- vf_id %d, vf_os %d resources- n_rxq-%d, n_txq-%d, n_sbs-%d, n_macs-%d, n_vlans-%d, n_mcs-%d\n", + vf->abs_vfid, acquire->vfdev_info.vf_id, acquire->vfdev_info.vf_os, + acquire->resc_request.num_rxqs, acquire->resc_request.num_txqs, + acquire->resc_request.num_sbs, acquire->resc_request.num_mac_filters, + acquire->resc_request.num_vlan_filters, + acquire->resc_request.num_mc_filters); + + /* Prevent VFs with old drivers from loading, since they calculate + * CIDs incorrectly requiring a VF-flr [VM reboot] in order to recover + * while being upgraded. + */ + rc = bnx2x_vf_mbx_acquire_chk_dorq(bp, vf, mbx); + if (rc) { + DP(BNX2X_MSG_IOV, + "VF [%d] - Can't support acquire request due to doorbell mismatch. Please update VM driver\n", + vf->abs_vfid); + goto out; + } + + /* Verify the VF fastpath HSI can be supported by the loaded FW. + * Linux vfs should be oblivious to changes between v0 and v2. + */ + if (bnx2x_vf_mbx_is_windows_vm(bp, &mbx->msg->req.acquire)) + vf->fp_hsi = acquire->vfdev_info.fp_hsi_ver; + else + vf->fp_hsi = max_t(u8, acquire->vfdev_info.fp_hsi_ver, + ETH_FP_HSI_VER_2); + if (vf->fp_hsi > ETH_FP_HSI_VERSION) { + DP(BNX2X_MSG_IOV, + "VF [%d] - Can't support acquire request since VF requests a FW version which is too new [%02x > %02x]\n", + vf->abs_vfid, acquire->vfdev_info.fp_hsi_ver, + ETH_FP_HSI_VERSION); + rc = -EINVAL; + goto out; + } + + /* acquire the resources */ + rc = bnx2x_vf_acquire(bp, vf, &acquire->resc_request); + + /* store address of vf's bulletin board */ + vf->bulletin_map = acquire->bulletin_addr; + if (acquire->vfdev_info.caps & VF_CAP_SUPPORT_EXT_BULLETIN) { + DP(BNX2X_MSG_IOV, "VF[%d] supports long bulletin boards\n", + vf->abs_vfid); + vf->cfg_flags |= VF_CFG_EXT_BULLETIN; + } else { + vf->cfg_flags &= ~VF_CFG_EXT_BULLETIN; + } + + if (acquire->vfdev_info.caps & VF_CAP_SUPPORT_VLAN_FILTER) { + DP(BNX2X_MSG_IOV, "VF[%d] supports vlan filtering\n", + vf->abs_vfid); + vf->cfg_flags |= VF_CFG_VLAN_FILTER; + } else { + vf->cfg_flags &= ~VF_CFG_VLAN_FILTER; + } + +out: + /* response */ + bnx2x_vf_mbx_acquire_resp(bp, vf, mbx, rc); +} + +static void bnx2x_vf_mbx_init_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct vfpf_init_tlv *init = &mbx->msg->req.init; + int rc; + + /* record ghost addresses from vf message */ + vf->fw_stat_map = init->stats_addr; + vf->stats_stride = init->stats_stride; + rc = bnx2x_vf_init(bp, vf, (dma_addr_t *)init->sb_addr); + + /* set VF multiqueue statistics collection mode */ + if (init->flags & VFPF_INIT_FLG_STATS_COALESCE) + vf->cfg_flags |= VF_CFG_STATS_COALESCE; + + /* Update VF's view of link state */ + if (vf->cfg_flags & VF_CFG_EXT_BULLETIN) + bnx2x_iov_link_update_vf(bp, vf->index); + + /* response */ + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +/* convert MBX queue-flags to standard SP queue-flags */ +static void bnx2x_vf_mbx_set_q_flags(struct bnx2x *bp, u32 mbx_q_flags, + unsigned long *sp_q_flags) +{ + if (mbx_q_flags & VFPF_QUEUE_FLG_TPA) + __set_bit(BNX2X_Q_FLG_TPA, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_TPA_IPV6) + __set_bit(BNX2X_Q_FLG_TPA_IPV6, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_TPA_GRO) + __set_bit(BNX2X_Q_FLG_TPA_GRO, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_STATS) + __set_bit(BNX2X_Q_FLG_STATS, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_VLAN) + __set_bit(BNX2X_Q_FLG_VLAN, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_COS) + __set_bit(BNX2X_Q_FLG_COS, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_HC) + __set_bit(BNX2X_Q_FLG_HC, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_DHC) + __set_bit(BNX2X_Q_FLG_DHC, sp_q_flags); + if (mbx_q_flags & VFPF_QUEUE_FLG_LEADING_RSS) + __set_bit(BNX2X_Q_FLG_LEADING_RSS, sp_q_flags); + + /* outer vlan removal is set according to PF's multi function mode */ + if (IS_MF_SD(bp)) + __set_bit(BNX2X_Q_FLG_OV, sp_q_flags); +} + +static void bnx2x_vf_mbx_setup_q(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct vfpf_setup_q_tlv *setup_q = &mbx->msg->req.setup_q; + struct bnx2x_vf_queue_construct_params qctor; + int rc = 0; + + /* verify vf_qid */ + if (setup_q->vf_qid >= vf_rxq_count(vf)) { + BNX2X_ERR("vf_qid %d invalid, max queue count is %d\n", + setup_q->vf_qid, vf_rxq_count(vf)); + rc = -EINVAL; + goto response; + } + + /* tx queues must be setup alongside rx queues thus if the rx queue + * is not marked as valid there's nothing to do. + */ + if (setup_q->param_valid & (VFPF_RXQ_VALID|VFPF_TXQ_VALID)) { + struct bnx2x_vf_queue *q = vfq_get(vf, setup_q->vf_qid); + unsigned long q_type = 0; + + struct bnx2x_queue_init_params *init_p; + struct bnx2x_queue_setup_params *setup_p; + + if (bnx2x_vfq_is_leading(q)) + bnx2x_leading_vfq_init(bp, vf, q); + + /* re-init the VF operation context */ + memset(&qctor, 0 , + sizeof(struct bnx2x_vf_queue_construct_params)); + setup_p = &qctor.prep_qsetup; + init_p = &qctor.qstate.params.init; + + /* activate immediately */ + __set_bit(BNX2X_Q_FLG_ACTIVE, &setup_p->flags); + + if (setup_q->param_valid & VFPF_TXQ_VALID) { + struct bnx2x_txq_setup_params *txq_params = + &setup_p->txq_params; + + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + /* save sb resource index */ + q->sb_idx = setup_q->txq.vf_sb; + + /* tx init */ + init_p->tx.hc_rate = setup_q->txq.hc_rate; + init_p->tx.sb_cq_index = setup_q->txq.sb_index; + + bnx2x_vf_mbx_set_q_flags(bp, setup_q->txq.flags, + &init_p->tx.flags); + + /* tx setup - flags */ + bnx2x_vf_mbx_set_q_flags(bp, setup_q->txq.flags, + &setup_p->flags); + + /* tx setup - general, nothing */ + + /* tx setup - tx */ + txq_params->dscr_map = setup_q->txq.txq_addr; + txq_params->sb_cq_index = setup_q->txq.sb_index; + txq_params->traffic_type = setup_q->txq.traffic_type; + + bnx2x_vfop_qctor_dump_tx(bp, vf, init_p, setup_p, + q->index, q->sb_idx); + } + + if (setup_q->param_valid & VFPF_RXQ_VALID) { + struct bnx2x_rxq_setup_params *rxq_params = + &setup_p->rxq_params; + + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + + /* Note: there is no support for different SBs + * for TX and RX + */ + q->sb_idx = setup_q->rxq.vf_sb; + + /* rx init */ + init_p->rx.hc_rate = setup_q->rxq.hc_rate; + init_p->rx.sb_cq_index = setup_q->rxq.sb_index; + bnx2x_vf_mbx_set_q_flags(bp, setup_q->rxq.flags, + &init_p->rx.flags); + + /* rx setup - flags */ + bnx2x_vf_mbx_set_q_flags(bp, setup_q->rxq.flags, + &setup_p->flags); + + /* rx setup - general */ + setup_p->gen_params.mtu = setup_q->rxq.mtu; + + /* rx setup - rx */ + rxq_params->drop_flags = setup_q->rxq.drop_flags; + rxq_params->dscr_map = setup_q->rxq.rxq_addr; + rxq_params->sge_map = setup_q->rxq.sge_addr; + rxq_params->rcq_map = setup_q->rxq.rcq_addr; + rxq_params->rcq_np_map = setup_q->rxq.rcq_np_addr; + rxq_params->buf_sz = setup_q->rxq.buf_sz; + rxq_params->tpa_agg_sz = setup_q->rxq.tpa_agg_sz; + rxq_params->max_sges_pkt = setup_q->rxq.max_sge_pkt; + rxq_params->sge_buf_sz = setup_q->rxq.sge_buf_sz; + rxq_params->cache_line_log = + setup_q->rxq.cache_line_log; + rxq_params->sb_cq_index = setup_q->rxq.sb_index; + + /* rx setup - multicast engine */ + if (bnx2x_vfq_is_leading(q)) { + u8 mcast_id = FW_VF_HANDLE(vf->abs_vfid); + + rxq_params->mcast_engine_id = mcast_id; + __set_bit(BNX2X_Q_FLG_MCAST, &setup_p->flags); + } + + bnx2x_vfop_qctor_dump_rx(bp, vf, init_p, setup_p, + q->index, q->sb_idx); + } + /* complete the preparations */ + bnx2x_vfop_qctor_prep(bp, vf, q, &qctor, q_type); + + rc = bnx2x_vf_queue_setup(bp, vf, q->index, &qctor); + if (rc) + goto response; + } +response: + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +static int bnx2x_vf_mbx_macvlan_list(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct vfpf_set_q_filters_tlv *tlv, + struct bnx2x_vf_mac_vlan_filters **pfl, + u32 type_flag) +{ + int i, j; + struct bnx2x_vf_mac_vlan_filters *fl = NULL; + size_t fsz; + + fsz = tlv->n_mac_vlan_filters * + sizeof(struct bnx2x_vf_mac_vlan_filter) + + sizeof(struct bnx2x_vf_mac_vlan_filters); + + fl = kzalloc(fsz, GFP_KERNEL); + if (!fl) + return -ENOMEM; + + for (i = 0, j = 0; i < tlv->n_mac_vlan_filters; i++) { + struct vfpf_q_mac_vlan_filter *msg_filter = &tlv->filters[i]; + + if ((msg_filter->flags & type_flag) != type_flag) + continue; + memset(&fl->filters[j], 0, sizeof(fl->filters[j])); + if (type_flag & VFPF_Q_FILTER_DEST_MAC_VALID) { + fl->filters[j].mac = msg_filter->mac; + fl->filters[j].type |= BNX2X_VF_FILTER_MAC; + } + if (type_flag & VFPF_Q_FILTER_VLAN_TAG_VALID) { + fl->filters[j].vid = msg_filter->vlan_tag; + fl->filters[j].type |= BNX2X_VF_FILTER_VLAN; + } + fl->filters[j].add = !!(msg_filter->flags & VFPF_Q_FILTER_SET); + fl->count++; + j++; + } + if (!fl->count) + kfree(fl); + else + *pfl = fl; + + return 0; +} + +static int bnx2x_vf_filters_contain(struct vfpf_set_q_filters_tlv *filters, + u32 flags) +{ + int i, cnt = 0; + + for (i = 0; i < filters->n_mac_vlan_filters; i++) + if ((filters->filters[i].flags & flags) == flags) + cnt++; + + return cnt; +} + +static void bnx2x_vf_mbx_dp_q_filter(struct bnx2x *bp, int msglvl, int idx, + struct vfpf_q_mac_vlan_filter *filter) +{ + DP(msglvl, "MAC-VLAN[%d] -- flags=0x%x\n", idx, filter->flags); + if (filter->flags & VFPF_Q_FILTER_VLAN_TAG_VALID) + DP_CONT(msglvl, ", vlan=%d", filter->vlan_tag); + if (filter->flags & VFPF_Q_FILTER_DEST_MAC_VALID) + DP_CONT(msglvl, ", MAC=%pM", filter->mac); + DP_CONT(msglvl, "\n"); +} + +static void bnx2x_vf_mbx_dp_q_filters(struct bnx2x *bp, int msglvl, + struct vfpf_set_q_filters_tlv *filters) +{ + int i; + + if (filters->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) + for (i = 0; i < filters->n_mac_vlan_filters; i++) + bnx2x_vf_mbx_dp_q_filter(bp, msglvl, i, + &filters->filters[i]); + + if (filters->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) + DP(msglvl, "RX-MASK=0x%x\n", filters->rx_mask); + + if (filters->flags & VFPF_SET_Q_FILTERS_MULTICAST_CHANGED) + for (i = 0; i < filters->n_multicast; i++) + DP(msglvl, "MULTICAST=%pM\n", filters->multicast[i]); +} + +#define VFPF_MAC_FILTER VFPF_Q_FILTER_DEST_MAC_VALID +#define VFPF_VLAN_FILTER VFPF_Q_FILTER_VLAN_TAG_VALID +#define VFPF_VLAN_MAC_FILTER (VFPF_VLAN_FILTER | VFPF_MAC_FILTER) + +static int bnx2x_vf_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf) +{ + int rc = 0; + + struct vfpf_set_q_filters_tlv *msg = + &BP_VF_MBX(bp, vf->index)->msg->req.set_q_filters; + + /* check for any mac/vlan changes */ + if (msg->flags & VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED) { + struct bnx2x_vf_mac_vlan_filters *fl = NULL; + + /* build vlan-mac list */ + rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl, + VFPF_VLAN_MAC_FILTER); + if (rc) + goto op_err; + + if (fl) { + + /* set vlan-mac list */ + rc = bnx2x_vf_mac_vlan_config_list(bp, vf, fl, + msg->vf_qid, + false); + if (rc) + goto op_err; + } + + /* build mac list */ + fl = NULL; + + rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl, + VFPF_MAC_FILTER); + if (rc) + goto op_err; + + if (fl) { + /* set mac list */ + rc = bnx2x_vf_mac_vlan_config_list(bp, vf, fl, + msg->vf_qid, + false); + if (rc) + goto op_err; + } + + /* build vlan list */ + fl = NULL; + + rc = bnx2x_vf_mbx_macvlan_list(bp, vf, msg, &fl, + VFPF_VLAN_FILTER); + if (rc) + goto op_err; + + if (fl) { + /* set vlan list */ + rc = bnx2x_vf_mac_vlan_config_list(bp, vf, fl, + msg->vf_qid, + false); + if (rc) + goto op_err; + } + + } + + if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) { + unsigned long accept = 0; + struct pf_vf_bulletin_content *bulletin = + BP_VF_BULLETIN(bp, vf->index); + + /* Ignore VF requested mode; instead set a regular mode */ + if (msg->rx_mask != VFPF_RX_MASK_ACCEPT_NONE) { + __set_bit(BNX2X_ACCEPT_UNICAST, &accept); + __set_bit(BNX2X_ACCEPT_MULTICAST, &accept); + __set_bit(BNX2X_ACCEPT_BROADCAST, &accept); + } + + /* any_vlan is not configured if HV is forcing VLAN + * any_vlan is configured if + * 1. VF does not support vlan filtering + * OR + * 2. VF supports vlan filtering and explicitly requested it + */ + if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)) && + (!(vf->cfg_flags & VF_CFG_VLAN_FILTER) || + msg->rx_mask & VFPF_RX_MASK_ACCEPT_ANY_VLAN)) + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept); + + /* set rx-mode */ + rc = bnx2x_vf_rxmode(bp, vf, msg->vf_qid, accept); + if (rc) + goto op_err; + } + + if (msg->flags & VFPF_SET_Q_FILTERS_MULTICAST_CHANGED) { + /* set mcasts */ + rc = bnx2x_vf_mcast(bp, vf, msg->multicast, + msg->n_multicast, false); + if (rc) + goto op_err; + } +op_err: + if (rc) + BNX2X_ERR("QFILTERS[%d:%d] error: rc %d\n", + vf->abs_vfid, msg->vf_qid, rc); + return rc; +} + +static int bnx2x_filters_validate_mac(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct vfpf_set_q_filters_tlv *filters) +{ + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf->index); + int rc = 0; + + /* if a mac was already set for this VF via the set vf mac ndo, we only + * accept mac configurations of that mac. Why accept them at all? + * because PF may have been unable to configure the mac at the time + * since queue was not set up. + */ + if (bulletin->valid_bitmap & 1 << MAC_ADDR_VALID) { + struct vfpf_q_mac_vlan_filter *filter = NULL; + int i; + + for (i = 0; i < filters->n_mac_vlan_filters; i++) { + if (!(filters->filters[i].flags & + VFPF_Q_FILTER_DEST_MAC_VALID)) + continue; + + /* once a mac was set by ndo can only accept + * a single mac... + */ + if (filter) { + BNX2X_ERR("VF[%d] requested the addition of multiple macs after set_vf_mac ndo was called [%d filters]\n", + vf->abs_vfid, + filters->n_mac_vlan_filters); + rc = -EPERM; + goto response; + } + + filter = &filters->filters[i]; + } + + /* ...and only the mac set by the ndo */ + if (filter && + !ether_addr_equal(filter->mac, bulletin->mac)) { + BNX2X_ERR("VF[%d] requested the addition of a mac address not matching the one configured by set_vf_mac ndo\n", + vf->abs_vfid); + + rc = -EPERM; + goto response; + } + } + +response: + return rc; +} + +static int bnx2x_filters_validate_vlan(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct vfpf_set_q_filters_tlv *filters) +{ + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf->index); + int rc = 0; + + /* if vlan was set by hypervisor we don't allow guest to config vlan */ + if (bulletin->valid_bitmap & 1 << VLAN_VALID) { + /* search for vlan filters */ + + if (bnx2x_vf_filters_contain(filters, + VFPF_Q_FILTER_VLAN_TAG_VALID)) { + BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n", + vf->abs_vfid); + rc = -EPERM; + goto response; + } + } + + /* verify vf_qid */ + if (filters->vf_qid > vf_rxq_count(vf)) { + rc = -EPERM; + goto response; + } + +response: + return rc; +} + +static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp, + struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct vfpf_set_q_filters_tlv *filters = &mbx->msg->req.set_q_filters; + int rc; + + rc = bnx2x_filters_validate_mac(bp, vf, filters); + if (rc) + goto response; + + rc = bnx2x_filters_validate_vlan(bp, vf, filters); + if (rc) + goto response; + + DP(BNX2X_MSG_IOV, "VF[%d] Q_FILTERS: queue[%d]\n", + vf->abs_vfid, + filters->vf_qid); + + /* print q_filter message */ + bnx2x_vf_mbx_dp_q_filters(bp, BNX2X_MSG_IOV, filters); + + rc = bnx2x_vf_mbx_qfilters(bp, vf); +response: + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +static void bnx2x_vf_mbx_teardown_q(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int qid = mbx->msg->req.q_op.vf_qid; + int rc; + + DP(BNX2X_MSG_IOV, "VF[%d] Q_TEARDOWN: vf_qid=%d\n", + vf->abs_vfid, qid); + + rc = bnx2x_vf_queue_teardown(bp, vf, qid); + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +static void bnx2x_vf_mbx_close_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int rc; + + DP(BNX2X_MSG_IOV, "VF[%d] VF_CLOSE\n", vf->abs_vfid); + + rc = bnx2x_vf_close(bp, vf); + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +static void bnx2x_vf_mbx_release_vf(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int rc; + + DP(BNX2X_MSG_IOV, "VF[%d] VF_RELEASE\n", vf->abs_vfid); + + rc = bnx2x_vf_free(bp, vf); + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct bnx2x_config_rss_params rss; + struct vfpf_rss_tlv *rss_tlv = &mbx->msg->req.update_rss; + int rc = 0; + + if (rss_tlv->ind_table_size != T_ETH_INDIRECTION_TABLE_SIZE || + rss_tlv->rss_key_size != T_ETH_RSS_KEY) { + BNX2X_ERR("failing rss configuration of vf %d due to size mismatch\n", + vf->index); + rc = -EINVAL; + goto mbx_resp; + } + + memset(&rss, 0, sizeof(struct bnx2x_config_rss_params)); + + /* set vfop params according to rss tlv */ + memcpy(rss.ind_table, rss_tlv->ind_table, + T_ETH_INDIRECTION_TABLE_SIZE); + memcpy(rss.rss_key, rss_tlv->rss_key, sizeof(rss_tlv->rss_key)); + rss.rss_obj = &vf->rss_conf_obj; + rss.rss_result_mask = rss_tlv->rss_result_mask; + + /* flags handled individually for backward/forward compatibility */ + rss.rss_flags = 0; + rss.ramrod_flags = 0; + + if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED) + __set_bit(BNX2X_RSS_MODE_DISABLED, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR) + __set_bit(BNX2X_RSS_MODE_REGULAR, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_SET_SRCH) + __set_bit(BNX2X_RSS_SET_SRCH, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_IPV4) + __set_bit(BNX2X_RSS_IPV4, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_IPV4_TCP) + __set_bit(BNX2X_RSS_IPV4_TCP, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_IPV4_UDP) + __set_bit(BNX2X_RSS_IPV4_UDP, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_IPV6) + __set_bit(BNX2X_RSS_IPV6, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_IPV6_TCP) + __set_bit(BNX2X_RSS_IPV6_TCP, &rss.rss_flags); + if (rss_tlv->rss_flags & VFPF_RSS_IPV6_UDP) + __set_bit(BNX2X_RSS_IPV6_UDP, &rss.rss_flags); + + if ((!(rss_tlv->rss_flags & VFPF_RSS_IPV4_TCP) && + rss_tlv->rss_flags & VFPF_RSS_IPV4_UDP) || + (!(rss_tlv->rss_flags & VFPF_RSS_IPV6_TCP) && + rss_tlv->rss_flags & VFPF_RSS_IPV6_UDP)) { + BNX2X_ERR("about to hit a FW assert. aborting...\n"); + rc = -EINVAL; + goto mbx_resp; + } + + rc = bnx2x_vf_rss_update(bp, vf, &rss); +mbx_resp: + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +static int bnx2x_validate_tpa_params(struct bnx2x *bp, + struct vfpf_tpa_tlv *tpa_tlv) +{ + int rc = 0; + + if (tpa_tlv->tpa_client_info.max_sges_for_packet > + U_ETH_MAX_SGES_FOR_PACKET) { + rc = -EINVAL; + BNX2X_ERR("TPA update: max_sges received %d, max is %d\n", + tpa_tlv->tpa_client_info.max_sges_for_packet, + U_ETH_MAX_SGES_FOR_PACKET); + } + + if (tpa_tlv->tpa_client_info.max_tpa_queues > MAX_AGG_QS(bp)) { + rc = -EINVAL; + BNX2X_ERR("TPA update: max_tpa_queues received %d, max is %d\n", + tpa_tlv->tpa_client_info.max_tpa_queues, + MAX_AGG_QS(bp)); + } + + return rc; +} + +static void bnx2x_vf_mbx_update_tpa(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + struct bnx2x_queue_update_tpa_params vf_op_params; + struct vfpf_tpa_tlv *tpa_tlv = &mbx->msg->req.update_tpa; + int rc = 0; + + memset(&vf_op_params, 0, sizeof(vf_op_params)); + + if (bnx2x_validate_tpa_params(bp, tpa_tlv)) + goto mbx_resp; + + vf_op_params.complete_on_both_clients = + tpa_tlv->tpa_client_info.complete_on_both_clients; + vf_op_params.dont_verify_thr = + tpa_tlv->tpa_client_info.dont_verify_thr; + vf_op_params.max_agg_sz = + tpa_tlv->tpa_client_info.max_agg_size; + vf_op_params.max_sges_pkt = + tpa_tlv->tpa_client_info.max_sges_for_packet; + vf_op_params.max_tpa_queues = + tpa_tlv->tpa_client_info.max_tpa_queues; + vf_op_params.sge_buff_sz = + tpa_tlv->tpa_client_info.sge_buff_size; + vf_op_params.sge_pause_thr_high = + tpa_tlv->tpa_client_info.sge_pause_thr_high; + vf_op_params.sge_pause_thr_low = + tpa_tlv->tpa_client_info.sge_pause_thr_low; + vf_op_params.tpa_mode = + tpa_tlv->tpa_client_info.tpa_mode; + vf_op_params.update_ipv4 = + tpa_tlv->tpa_client_info.update_ipv4; + vf_op_params.update_ipv6 = + tpa_tlv->tpa_client_info.update_ipv6; + + rc = bnx2x_vf_tpa_update(bp, vf, tpa_tlv, &vf_op_params); + +mbx_resp: + bnx2x_vf_mbx_resp(bp, vf, rc); +} + +/* dispatch request */ +static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, + struct bnx2x_vf_mbx *mbx) +{ + int i; + + if (vf->state == VF_LOST) { + /* Just ack the FW and return if VFs are lost + * in case of parity error. VFs are supposed to be timedout + * on waiting for PF response. + */ + DP(BNX2X_MSG_IOV, + "VF 0x%x lost, not handling the request\n", vf->abs_vfid); + + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + return; + } + + /* check if tlv type is known */ + if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) { + /* Lock the per vf op mutex and note the locker's identity. + * The unlock will take place in mbx response. + */ + bnx2x_lock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); + + /* switch on the opcode */ + switch (mbx->first_tlv.tl.type) { + case CHANNEL_TLV_ACQUIRE: + bnx2x_vf_mbx_acquire(bp, vf, mbx); + return; + case CHANNEL_TLV_INIT: + bnx2x_vf_mbx_init_vf(bp, vf, mbx); + return; + case CHANNEL_TLV_SETUP_Q: + bnx2x_vf_mbx_setup_q(bp, vf, mbx); + return; + case CHANNEL_TLV_SET_Q_FILTERS: + bnx2x_vf_mbx_set_q_filters(bp, vf, mbx); + return; + case CHANNEL_TLV_TEARDOWN_Q: + bnx2x_vf_mbx_teardown_q(bp, vf, mbx); + return; + case CHANNEL_TLV_CLOSE: + bnx2x_vf_mbx_close_vf(bp, vf, mbx); + return; + case CHANNEL_TLV_RELEASE: + bnx2x_vf_mbx_release_vf(bp, vf, mbx); + return; + case CHANNEL_TLV_UPDATE_RSS: + bnx2x_vf_mbx_update_rss(bp, vf, mbx); + return; + case CHANNEL_TLV_UPDATE_TPA: + bnx2x_vf_mbx_update_tpa(bp, vf, mbx); + return; + } + + } else { + /* unknown TLV - this may belong to a VF driver from the future + * - a version written after this PF driver was written, which + * supports features unknown as of yet. Too bad since we don't + * support them. Or this may be because someone wrote a crappy + * VF driver and is sending garbage over the channel. + */ + BNX2X_ERR("unknown TLV. type %d length %d vf->state was %d. first 20 bytes of mailbox buffer:\n", + mbx->first_tlv.tl.type, mbx->first_tlv.tl.length, + vf->state); + for (i = 0; i < 20; i++) + DP_CONT(BNX2X_MSG_IOV, "%x ", + mbx->msg->req.tlv_buf_size.tlv_buffer[i]); + } + + /* can we respond to VF (do we have an address for it?) */ + if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { + /* notify the VF that we do not support this request */ + bnx2x_vf_mbx_resp(bp, vf, PFVF_STATUS_NOT_SUPPORTED); + } else { + /* can't send a response since this VF is unknown to us + * just ack the FW to release the mailbox and unlock + * the channel. + */ + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + /* Firmware ack should be written before unlocking channel */ + mmiowb(); + bnx2x_unlock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); + } +} + +void bnx2x_vf_mbx_schedule(struct bnx2x *bp, + struct vf_pf_event_data *vfpf_event) +{ + u8 vf_idx; + + DP(BNX2X_MSG_IOV, + "vf pf event received: vfid %d, address_hi %x, address lo %x", + vfpf_event->vf_id, vfpf_event->msg_addr_hi, vfpf_event->msg_addr_lo); + /* Sanity checks consider removing later */ + + /* check if the vf_id is valid */ + if (vfpf_event->vf_id - BP_VFDB(bp)->sriov.first_vf_in_pf > + BNX2X_NR_VIRTFN(bp)) { + BNX2X_ERR("Illegal vf_id %d max allowed: %d\n", + vfpf_event->vf_id, BNX2X_NR_VIRTFN(bp)); + return; + } + + vf_idx = bnx2x_vf_idx_by_abs_fid(bp, vfpf_event->vf_id); + + /* Update VFDB with current message and schedule its handling */ + mutex_lock(&BP_VFDB(bp)->event_mutex); + BP_VF_MBX(bp, vf_idx)->vf_addr_hi = + le32_to_cpu(vfpf_event->msg_addr_hi); + BP_VF_MBX(bp, vf_idx)->vf_addr_lo = + le32_to_cpu(vfpf_event->msg_addr_lo); + BP_VFDB(bp)->event_occur |= (1ULL << vf_idx); + mutex_unlock(&BP_VFDB(bp)->event_mutex); + + bnx2x_schedule_iov_task(bp, BNX2X_IOV_HANDLE_VF_MSG); +} + +/* handle new vf-pf messages */ +void bnx2x_vf_mbx(struct bnx2x *bp) +{ + struct bnx2x_vfdb *vfdb = BP_VFDB(bp); + u64 events; + u8 vf_idx; + int rc; + + if (!vfdb) + return; + + mutex_lock(&vfdb->event_mutex); + events = vfdb->event_occur; + vfdb->event_occur = 0; + mutex_unlock(&vfdb->event_mutex); + + for_each_vf(bp, vf_idx) { + struct bnx2x_vf_mbx *mbx = BP_VF_MBX(bp, vf_idx); + struct bnx2x_virtf *vf = BP_VF(bp, vf_idx); + + /* Handle VFs which have pending events */ + if (!(events & (1ULL << vf_idx))) + continue; + + DP(BNX2X_MSG_IOV, + "Handling vf pf event vfid %d, address: [%x:%x], resp_offset 0x%x\n", + vf_idx, mbx->vf_addr_hi, mbx->vf_addr_lo, + mbx->first_tlv.resp_msg_offset); + + /* dmae to get the VF request */ + rc = bnx2x_copy32_vf_dmae(bp, true, mbx->msg_mapping, + vf->abs_vfid, mbx->vf_addr_hi, + mbx->vf_addr_lo, + sizeof(union vfpf_tlvs)/4); + if (rc) { + BNX2X_ERR("Failed to copy request VF %d\n", + vf->abs_vfid); + bnx2x_vf_release(bp, vf); + return; + } + + /* process the VF message header */ + mbx->first_tlv = mbx->msg->req.first_tlv; + + /* Clean response buffer to refrain from falsely + * seeing chains. + */ + memset(&mbx->msg->resp, 0, sizeof(union pfvf_tlvs)); + + /* dispatch the request (will prepare the response) */ + bnx2x_vf_mbx_request(bp, vf, mbx); + } +} + +void bnx2x_vf_bulletin_finalize(struct pf_vf_bulletin_content *bulletin, + bool support_long) +{ + /* Older VFs contain a bug where they can't check CRC for bulletin + * boards of length greater than legacy size. + */ + bulletin->length = support_long ? BULLETIN_CONTENT_SIZE : + BULLETIN_CONTENT_LEGACY_SIZE; + bulletin->crc = bnx2x_crc_vf_bulletin(bulletin); +} + +/* propagate local bulletin board to vf */ +int bnx2x_post_vf_bulletin(struct bnx2x *bp, int vf) +{ + struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vf); + dma_addr_t pf_addr = BP_VF_BULLETIN_DMA(bp)->mapping + + vf * BULLETIN_CONTENT_SIZE; + dma_addr_t vf_addr = bnx2x_vf(bp, vf, bulletin_map); + int rc; + + /* can only update vf after init took place */ + if (bnx2x_vf(bp, vf, state) != VF_ENABLED && + bnx2x_vf(bp, vf, state) != VF_ACQUIRED) + return 0; + + /* increment bulletin board version and compute crc */ + bulletin->version++; + bnx2x_vf_bulletin_finalize(bulletin, + (bnx2x_vf(bp, vf, cfg_flags) & + VF_CFG_EXT_BULLETIN) ? true : false); + + /* propagate bulletin board via dmae to vm memory */ + rc = bnx2x_copy32_vf_dmae(bp, false, pf_addr, + bnx2x_vf(bp, vf, abs_vfid), U64_HI(vf_addr), + U64_LO(vf_addr), bulletin->length / 4); + return rc; +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h new file mode 100644 index 000000000..64f2b52c5 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h @@ -0,0 +1,473 @@ +/* bnx2x_vfpf.h: Qlogic Everest network driver. + * + * Copyright (c) 2011-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * Unless you and Qlogic execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the “GPL”), + * available at http://www.gnu.org/licenses/gpl-2.0.html, with the following + * added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions + * of the license of that module. An independent module is a module which is + * not derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Ariel Elior <ariel.elior@qlogic.com> + */ +#ifndef VF_PF_IF_H +#define VF_PF_IF_H + +#ifdef CONFIG_BNX2X_SRIOV + +/* Common definitions for all HVs */ +struct vf_pf_resc_request { + u8 num_rxqs; + u8 num_txqs; + u8 num_sbs; + u8 num_mac_filters; + u8 num_vlan_filters; + u8 num_mc_filters; /* No limit so superfluous */ +}; + +struct hw_sb_info { + u8 hw_sb_id; /* aka absolute igu id, used to ack the sb */ + u8 sb_qid; /* used to update DHC for sb */ +}; + +/* HW VF-PF channel definitions + * A.K.A VF-PF mailbox + */ +#define TLV_BUFFER_SIZE 1024 +#define PF_VF_BULLETIN_SIZE 512 + +#define VFPF_QUEUE_FLG_TPA 0x0001 +#define VFPF_QUEUE_FLG_TPA_IPV6 0x0002 +#define VFPF_QUEUE_FLG_TPA_GRO 0x0004 +#define VFPF_QUEUE_FLG_CACHE_ALIGN 0x0008 +#define VFPF_QUEUE_FLG_STATS 0x0010 +#define VFPF_QUEUE_FLG_OV 0x0020 +#define VFPF_QUEUE_FLG_VLAN 0x0040 +#define VFPF_QUEUE_FLG_COS 0x0080 +#define VFPF_QUEUE_FLG_HC 0x0100 +#define VFPF_QUEUE_FLG_DHC 0x0200 +#define VFPF_QUEUE_FLG_LEADING_RSS 0x0400 + +#define VFPF_QUEUE_DROP_IP_CS_ERR (1 << 0) +#define VFPF_QUEUE_DROP_TCP_CS_ERR (1 << 1) +#define VFPF_QUEUE_DROP_TTL0 (1 << 2) +#define VFPF_QUEUE_DROP_UDP_CS_ERR (1 << 3) + +#define VFPF_RX_MASK_ACCEPT_NONE 0x00000000 +#define VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST 0x00000001 +#define VFPF_RX_MASK_ACCEPT_MATCHED_MULTICAST 0x00000002 +#define VFPF_RX_MASK_ACCEPT_ALL_UNICAST 0x00000004 +#define VFPF_RX_MASK_ACCEPT_ALL_MULTICAST 0x00000008 +#define VFPF_RX_MASK_ACCEPT_BROADCAST 0x00000010 +#define VFPF_RX_MASK_ACCEPT_ANY_VLAN 0x00000020 + +#define BULLETIN_CONTENT_SIZE (sizeof(struct pf_vf_bulletin_content)) +#define BULLETIN_CONTENT_LEGACY_SIZE (32) +#define BULLETIN_ATTEMPTS 5 /* crc failures before throwing towel */ +#define BULLETIN_CRC_SEED 0 + +enum { + PFVF_STATUS_WAITING = 0, + PFVF_STATUS_SUCCESS, + PFVF_STATUS_FAILURE, + PFVF_STATUS_NOT_SUPPORTED, + PFVF_STATUS_NO_RESOURCE +}; + +/* vf pf channel tlvs */ +/* general tlv header (used for both vf->pf request and pf->vf response) */ +struct channel_tlv { + u16 type; + u16 length; +}; + +/* header of first vf->pf tlv carries the offset used to calculate response + * buffer address + */ +struct vfpf_first_tlv { + struct channel_tlv tl; + u32 resp_msg_offset; +}; + +/* header of pf->vf tlvs, carries the status of handling the request */ +struct pfvf_tlv { + struct channel_tlv tl; + u8 status; + u8 padding[3]; +}; + +/* response tlv used for most tlvs */ +struct pfvf_general_resp_tlv { + struct pfvf_tlv hdr; +}; + +/* used to terminate and pad a tlv list */ +struct channel_list_end_tlv { + struct channel_tlv tl; + u8 padding[4]; +}; + +/* Acquire */ +struct vfpf_acquire_tlv { + struct vfpf_first_tlv first_tlv; + + struct vf_pf_vfdev_info { + /* the following fields are for debug purposes */ + u8 vf_id; /* ME register value */ + u8 vf_os; /* e.g. Linux, W2K8 */ +#define VF_OS_SUBVERSION_MASK (0x1f) +#define VF_OS_MASK (0xe0) +#define VF_OS_SHIFT (5) +#define VF_OS_UNDEFINED (0 << VF_OS_SHIFT) +#define VF_OS_WINDOWS (1 << VF_OS_SHIFT) + + u8 fp_hsi_ver; + u8 caps; +#define VF_CAP_SUPPORT_EXT_BULLETIN (1 << 0) +#define VF_CAP_SUPPORT_VLAN_FILTER (1 << 1) + } vfdev_info; + + struct vf_pf_resc_request resc_request; + + aligned_u64 bulletin_addr; +}; + +/* simple operation request on queue */ +struct vfpf_q_op_tlv { + struct vfpf_first_tlv first_tlv; + u8 vf_qid; + u8 padding[3]; +}; + +/* receive side scaling tlv */ +struct vfpf_rss_tlv { + struct vfpf_first_tlv first_tlv; + u32 rss_flags; +#define VFPF_RSS_MODE_DISABLED (1 << 0) +#define VFPF_RSS_MODE_REGULAR (1 << 1) +#define VFPF_RSS_SET_SRCH (1 << 2) +#define VFPF_RSS_IPV4 (1 << 3) +#define VFPF_RSS_IPV4_TCP (1 << 4) +#define VFPF_RSS_IPV4_UDP (1 << 5) +#define VFPF_RSS_IPV6 (1 << 6) +#define VFPF_RSS_IPV6_TCP (1 << 7) +#define VFPF_RSS_IPV6_UDP (1 << 8) + u8 rss_result_mask; + u8 ind_table_size; + u8 rss_key_size; + u8 padding; + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; + u32 rss_key[T_ETH_RSS_KEY]; /* hash values */ +}; + +/* acquire response tlv - carries the allocated resources */ +struct pfvf_acquire_resp_tlv { + struct pfvf_tlv hdr; + struct pf_vf_pfdev_info { + u32 chip_num; + u32 pf_cap; +#define PFVF_CAP_RSS 0x00000001 +#define PFVF_CAP_DHC 0x00000002 +#define PFVF_CAP_TPA 0x00000004 +#define PFVF_CAP_TPA_UPDATE 0x00000008 +#define PFVF_CAP_VLAN_FILTER 0x00000010 + + char fw_ver[32]; + u16 db_size; + u8 indices_per_sb; + u8 padding; + } pfdev_info; + struct pf_vf_resc { + /* in case of status NO_RESOURCE in message hdr, pf will fill + * this struct with suggested amount of resources for next + * acquire request + */ +#define PFVF_MAX_QUEUES_PER_VF 16 +#define PFVF_MAX_SBS_PER_VF 16 + struct hw_sb_info hw_sbs[PFVF_MAX_SBS_PER_VF]; + u8 hw_qid[PFVF_MAX_QUEUES_PER_VF]; + u8 num_rxqs; + u8 num_txqs; + u8 num_sbs; + u8 num_mac_filters; + u8 num_vlan_filters; + u8 num_mc_filters; + u8 permanent_mac_addr[ETH_ALEN]; + u8 current_mac_addr[ETH_ALEN]; + u8 padding[2]; + } resc; +}; + +struct vfpf_port_phys_id_resp_tlv { + struct channel_tlv tl; + u8 id[ETH_ALEN]; + u8 padding[2]; +}; + +struct vfpf_fp_hsi_resp_tlv { + struct channel_tlv tl; + u8 is_supported; + u8 padding[3]; +}; + +#define VFPF_INIT_FLG_STATS_COALESCE (1 << 0) /* when set the VFs queues + * stats will be coalesced on + * the leading RSS queue + */ + +/* Init VF */ +struct vfpf_init_tlv { + struct vfpf_first_tlv first_tlv; + aligned_u64 sb_addr[PFVF_MAX_SBS_PER_VF]; /* vf_sb based */ + aligned_u64 spq_addr; + aligned_u64 stats_addr; + u16 stats_stride; + u32 flags; + u32 padding[2]; +}; + +/* Setup Queue */ +struct vfpf_setup_q_tlv { + struct vfpf_first_tlv first_tlv; + + struct vf_pf_rxq_params { + /* physical addresses */ + aligned_u64 rcq_addr; + aligned_u64 rcq_np_addr; + aligned_u64 rxq_addr; + aligned_u64 sge_addr; + + /* sb + hc info */ + u8 vf_sb; /* index in hw_sbs[] */ + u8 sb_index; /* Index in the SB */ + u16 hc_rate; /* desired interrupts per sec. */ + /* valid iff VFPF_QUEUE_FLG_HC */ + /* rx buffer info */ + u16 mtu; + u16 buf_sz; + u16 flags; /* VFPF_QUEUE_FLG_X flags */ + u16 stat_id; /* valid iff VFPF_QUEUE_FLG_STATS */ + + /* valid iff VFPF_QUEUE_FLG_TPA */ + u16 sge_buf_sz; + u16 tpa_agg_sz; + u8 max_sge_pkt; + + u8 drop_flags; /* VFPF_QUEUE_DROP_X, for Linux VMs + * all the flags are turned off + */ + + u8 cache_line_log; /* VFPF_QUEUE_FLG_CACHE_ALIGN */ + u8 padding; + } rxq; + + struct vf_pf_txq_params { + /* physical addresses */ + aligned_u64 txq_addr; + + /* sb + hc info */ + u8 vf_sb; /* index in hw_sbs[] */ + u8 sb_index; /* Index in the SB */ + u16 hc_rate; /* desired interrupts per sec. */ + /* valid iff VFPF_QUEUE_FLG_HC */ + u32 flags; /* VFPF_QUEUE_FLG_X flags */ + u16 stat_id; /* valid iff VFPF_QUEUE_FLG_STATS */ + u8 traffic_type; /* see in setup_context() */ + u8 padding; + } txq; + + u8 vf_qid; /* index in hw_qid[] */ + u8 param_valid; +#define VFPF_RXQ_VALID 0x01 +#define VFPF_TXQ_VALID 0x02 + u8 padding[2]; +}; + +/* Set Queue Filters */ +struct vfpf_q_mac_vlan_filter { + u32 flags; +#define VFPF_Q_FILTER_DEST_MAC_VALID 0x01 +#define VFPF_Q_FILTER_VLAN_TAG_VALID 0x02 +#define VFPF_Q_FILTER_SET 0x100 /* set/clear */ + u8 mac[ETH_ALEN]; + u16 vlan_tag; +}; + +/* configure queue filters */ +struct vfpf_set_q_filters_tlv { + struct vfpf_first_tlv first_tlv; + + u32 flags; +#define VFPF_SET_Q_FILTERS_MAC_VLAN_CHANGED 0x01 +#define VFPF_SET_Q_FILTERS_MULTICAST_CHANGED 0x02 +#define VFPF_SET_Q_FILTERS_RX_MASK_CHANGED 0x04 + + u8 vf_qid; /* index in hw_qid[] */ + u8 n_mac_vlan_filters; + u8 n_multicast; + u8 padding; + +#define PFVF_MAX_MAC_FILTERS 16 +#define PFVF_MAX_VLAN_FILTERS 16 +#define PFVF_MAX_FILTERS (PFVF_MAX_MAC_FILTERS +\ + PFVF_MAX_VLAN_FILTERS) + struct vfpf_q_mac_vlan_filter filters[PFVF_MAX_FILTERS]; + +#define PFVF_MAX_MULTICAST_PER_VF 32 + u8 multicast[PFVF_MAX_MULTICAST_PER_VF][ETH_ALEN]; + + u32 rx_mask; /* see mask constants at the top of the file */ +}; + +struct vfpf_tpa_tlv { + struct vfpf_first_tlv first_tlv; + + struct vf_pf_tpa_client_info { + aligned_u64 sge_addr[PFVF_MAX_QUEUES_PER_VF]; + u8 update_ipv4; + u8 update_ipv6; + u8 max_tpa_queues; + u8 max_sges_for_packet; + u8 complete_on_both_clients; + u8 dont_verify_thr; + u8 tpa_mode; + u16 sge_buff_size; + u16 max_agg_size; + u16 sge_pause_thr_low; + u16 sge_pause_thr_high; + } tpa_client_info; +}; + +/* close VF (disable VF) */ +struct vfpf_close_tlv { + struct vfpf_first_tlv first_tlv; + u16 vf_id; /* for debug */ + u8 padding[2]; +}; + +/* release the VF's acquired resources */ +struct vfpf_release_tlv { + struct vfpf_first_tlv first_tlv; + u16 vf_id; + u8 padding[2]; +}; + +struct tlv_buffer_size { + u8 tlv_buffer[TLV_BUFFER_SIZE]; +}; + +union vfpf_tlvs { + struct vfpf_first_tlv first_tlv; + struct vfpf_acquire_tlv acquire; + struct vfpf_init_tlv init; + struct vfpf_close_tlv close; + struct vfpf_q_op_tlv q_op; + struct vfpf_setup_q_tlv setup_q; + struct vfpf_set_q_filters_tlv set_q_filters; + struct vfpf_release_tlv release; + struct vfpf_rss_tlv update_rss; + struct vfpf_tpa_tlv update_tpa; + struct channel_list_end_tlv list_end; + struct tlv_buffer_size tlv_buf_size; +}; + +union pfvf_tlvs { + struct pfvf_general_resp_tlv general_resp; + struct pfvf_acquire_resp_tlv acquire_resp; + struct channel_list_end_tlv list_end; + struct tlv_buffer_size tlv_buf_size; +}; + +/* This is a structure which is allocated in the VF, which the PF may update + * when it deems it necessary to do so. The bulletin board is sampled + * periodically by the VF. A copy per VF is maintained in the PF (to prevent + * loss of data upon multiple updates (or the need for read modify write)). + */ +struct pf_vf_bulletin_size { + u8 size[PF_VF_BULLETIN_SIZE]; +}; + +struct pf_vf_bulletin_content { + u32 crc; /* crc of structure to ensure is not in + * mid-update + */ + u16 version; + u16 length; + + aligned_u64 valid_bitmap; /* bitmap indicating which fields + * hold valid values + */ + +#define MAC_ADDR_VALID 0 /* alert the vf that a new mac address + * is available for it + */ +#define VLAN_VALID 1 /* when set, the vf should not access + * the vfpf channel + */ +#define CHANNEL_DOWN 2 /* vfpf channel is disabled. VFs are not + * to attempt to send messages on the + * channel after this bit is set + */ +#define LINK_VALID 3 /* alert the VF thet a new link status + * update is available for it + */ + u8 mac[ETH_ALEN]; + u8 mac_padding[2]; + + u16 vlan; + u8 vlan_padding[6]; + + u16 link_speed; /* Effective line speed */ + u8 link_speed_padding[6]; + u32 link_flags; /* VFPF_LINK_REPORT_XXX flags */ +#define VFPF_LINK_REPORT_LINK_DOWN (1 << 0) +#define VFPF_LINK_REPORT_FULL_DUPLEX (1 << 1) +#define VFPF_LINK_REPORT_RX_FC_ON (1 << 2) +#define VFPF_LINK_REPORT_TX_FC_ON (1 << 3) + u8 link_flags_padding[4]; +}; + +union pf_vf_bulletin { + struct pf_vf_bulletin_content content; + struct pf_vf_bulletin_size size; +}; + +#define MAX_TLVS_IN_LIST 50 + +enum channel_tlvs { + CHANNEL_TLV_NONE, + CHANNEL_TLV_ACQUIRE, + CHANNEL_TLV_INIT, + CHANNEL_TLV_SETUP_Q, + CHANNEL_TLV_SET_Q_FILTERS, + CHANNEL_TLV_ACTIVATE_Q, + CHANNEL_TLV_DEACTIVATE_Q, + CHANNEL_TLV_TEARDOWN_Q, + CHANNEL_TLV_CLOSE, + CHANNEL_TLV_RELEASE, + CHANNEL_TLV_UPDATE_RSS_DEPRECATED, + CHANNEL_TLV_PF_RELEASE_VF, + CHANNEL_TLV_LIST_END, + CHANNEL_TLV_FLR, + CHANNEL_TLV_PF_SET_MAC, + CHANNEL_TLV_PF_SET_VLAN, + CHANNEL_TLV_UPDATE_RSS, + CHANNEL_TLV_PHYS_PORT_ID, + CHANNEL_TLV_UPDATE_TPA, + CHANNEL_TLV_FP_HSI_SUPPORT, + CHANNEL_TLV_MAX +}; + +#endif /* CONFIG_BNX2X_SRIOV */ +#endif /* VF_PF_IF_H */ |