diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c new file mode 100644 index 000000000..b9c0df7bd --- /dev/null +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2432.c @@ -0,0 +1,210 @@ +/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Qualcomm Technologies, Inc. QDF2432 EMAC SGMII Controller driver. + */ + +#include <linux/iopoll.h> +#include "emac.h" + +/* EMAC_SGMII register offsets */ +#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C +#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018 +#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058 +#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080 +#define EMAC_SGMII_PHY_RESET_CTRL 0x00a8 +#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4 + +/* SGMII digital lane registers */ +#define EMAC_SGMII_LN_DRVR_CTRL0 0x000C +#define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018 +#define EMAC_SGMII_LN_TX_MARGINING 0x001C +#define EMAC_SGMII_LN_TX_PRE 0x0020 +#define EMAC_SGMII_LN_TX_POST 0x0024 +#define EMAC_SGMII_LN_TX_BAND_MODE 0x0060 +#define EMAC_SGMII_LN_LANE_MODE 0x0064 +#define EMAC_SGMII_LN_PARALLEL_RATE 0x0078 +#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00B8 +#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D0 +#define EMAC_SGMII_LN_VGA_INITVAL 0x0134 +#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x017C +#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0188 +#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x0194 +#define EMAC_SGMII_LN_RX_BAND 0x019C +#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01B8 +#define EMAC_SGMII_LN_RSM_CONFIG 0x01F0 +#define EMAC_SGMII_LN_SIGDET_ENABLES 0x0224 +#define EMAC_SGMII_LN_SIGDET_CNTRL 0x0228 +#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x022C +#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02A0 +#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02AC +#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02BC + +/* SGMII digital lane register values */ +#define UCDR_STEP_BY_TWO_MODE0 BIT(7) +#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f) +#define UCDR_ENABLE BIT(6) +#define UCDR_SO_SATURATION(x) ((x) & 0x3f) + +#define SIGDET_LP_BYP_PS4 BIT(7) +#define SIGDET_EN_PS0_TO_PS2 BIT(6) + +#define TXVAL_VALID_INIT BIT(4) +#define KR_PCIGEN3_MODE BIT(0) + +#define MAIN_EN BIT(0) + +#define TX_MARGINING_MUX BIT(6) +#define TX_MARGINING(x) ((x) & 0x3f) + +#define TX_PRE_MUX BIT(6) + +#define TX_POST_MUX BIT(6) + +#define CML_GEAR_MODE(x) (((x) & 7) << 3) +#define CML2CMOS_IBOOST_MODE(x) ((x) & 7) + +#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2) +#define MIXER_DATARATE_MODE(x) ((x) & 3) + +#define VGA_THRESH_DFE(x) ((x) & 0x3f) + +#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5) +#define SIGDET_FLT_BYP BIT(0) + +#define SIGDET_LVL(x) (((x) & 0xf) << 4) + +#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1) + +#define DRVR_LOGIC_CLK_EN BIT(4) +#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf) + +#define PARALLEL_RATE_MODE0(x) ((x) & 0x3) + +#define BAND_MODE0(x) ((x) & 0x3) + +#define LANE_MODE(x) ((x) & 0x1f) + +#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5) +#define BYPASS_RSM_SAMP_CAL BIT(1) +#define BYPASS_RSM_DLL_CAL BIT(0) + +#define L0_RX_EQUALIZE_ENABLE BIT(6) + +#define PWRDN_B BIT(0) + +#define CDR_MAX_CNT(x) ((x) & 0xff) + +#define SERDES_START_WAIT_TIMES 100 + +struct emac_reg_write { + unsigned int offset; + u32 val; +}; + +static void emac_reg_write_all(void __iomem *base, + const struct emac_reg_write *itr, size_t size) +{ + size_t i; + + for (i = 0; i < size; ++itr, ++i) + writel(itr->val, base + itr->offset); +} + +static const struct emac_reg_write sgmii_laned[] = { + /* CDR Settings */ + {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0, + UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)}, + {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)}, + {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)}, + + /* TX/RX Settings */ + {EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2}, + + {EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE}, + {EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN}, + {EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)}, + {EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX}, + {EMAC_SGMII_LN_TX_POST, TX_POST_MUX}, + + {EMAC_SGMII_LN_CML_CTRL_MODE0, + CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)}, + {EMAC_SGMII_LN_MIXER_CTRL_MODE0, + MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)}, + {EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)}, + {EMAC_SGMII_LN_SIGDET_ENABLES, + SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP}, + {EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)}, + + {EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)}, + {EMAC_SGMII_LN_RX_MISC_CNTRL0, 0}, + {EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV, + DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)}, + + {EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)}, + {EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)}, + {EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)}, + {EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)}, + {EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)}, + {EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL}, +}; + +static const struct emac_reg_write physical_coding_sublayer_programming[] = { + {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B}, + {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)}, + {EMAC_SGMII_PHY_TX_PWR_CTRL, 0}, + {EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE}, +}; + +int emac_sgmii_init_qdf2432(struct emac_adapter *adpt) +{ + struct emac_sgmii *phy = &adpt->phy; + void __iomem *phy_regs = phy->base; + void __iomem *laned = phy->digital; + unsigned int i; + u32 lnstatus; + + /* PCS lane-x init */ + emac_reg_write_all(phy->base, physical_coding_sublayer_programming, + ARRAY_SIZE(physical_coding_sublayer_programming)); + + /* SGMII lane-x init */ + emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned)); + + /* Power up PCS and start reset lane state machine */ + + writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL); + writel(1, laned + SGMII_LN_RSM_START); + + /* Wait for c_ready assertion */ + for (i = 0; i < SERDES_START_WAIT_TIMES; i++) { + lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS); + if (lnstatus & BIT(1)) + break; + usleep_range(100, 200); + } + + if (i == SERDES_START_WAIT_TIMES) { + netdev_err(adpt->netdev, "SGMII failed to start\n"); + return -EIO; + } + + /* Disable digital and SERDES loopback */ + writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0); + writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2); + writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1); + + /* Mask out all the SGMII Interrupt */ + writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK); + + return 0; +} |