diff options
Diffstat (limited to 'drivers/net/mdio.c')
| -rw-r--r-- | drivers/net/mdio.c | 601 |
1 files changed, 601 insertions, 0 deletions
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c new file mode 100644 index 000000000..077364cbf --- /dev/null +++ b/drivers/net/mdio.c @@ -0,0 +1,601 @@ +/* + * mdio.c: Generic support for MDIO-compatible transceivers + * Copyright 2006-2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#include <linux/kernel.h> +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/ethtool.h> +#include <linux/mdio.h> +#include <linux/module.h> + +MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers"); +MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc."); +MODULE_LICENSE("GPL"); + +/** + * mdio45_probe - probe for an MDIO (clause 45) device + * @mdio: MDIO interface + * @prtad: Expected PHY address + * + * This sets @prtad and @mmds in the MDIO interface if successful. + * Returns 0 on success, negative on error. + */ +int mdio45_probe(struct mdio_if_info *mdio, int prtad) +{ + int mmd, stat2, devs1, devs2; + + /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY + * XS or DTE XS; give up if none is present. */ + for (mmd = 1; mmd <= 5; mmd++) { + /* Is this MMD present? */ + stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2); + if (stat2 < 0 || + (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) + continue; + + /* It should tell us about all the other MMDs */ + devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1); + devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2); + if (devs1 < 0 || devs2 < 0) + continue; + + mdio->prtad = prtad; + mdio->mmds = devs1 | (devs2 << 16); + return 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(mdio45_probe); + +/** + * mdio_set_flag - set or clear flag in an MDIO register + * @mdio: MDIO interface + * @prtad: PHY address + * @devad: MMD address + * @addr: Register address + * @mask: Mask for flag (single bit set) + * @sense: New value of flag + * + * This debounces changes: it does not write the register if the flag + * already has the proper value. Returns 0 on success, negative on error. + */ +int mdio_set_flag(const struct mdio_if_info *mdio, + int prtad, int devad, u16 addr, int mask, + bool sense) +{ + int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr); + int new_val; + + if (old_val < 0) + return old_val; + if (sense) + new_val = old_val | mask; + else + new_val = old_val & ~mask; + if (old_val == new_val) + return 0; + return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val); +} +EXPORT_SYMBOL(mdio_set_flag); + +/** + * mdio_link_ok - is link status up/OK + * @mdio: MDIO interface + * @mmd_mask: Mask for MMDs to check + * + * Returns 1 if the PHY reports link status up/OK, 0 otherwise. + * @mmd_mask is normally @mdio->mmds, but if loopback is enabled + * the MMDs being bypassed should be excluded from the mask. + */ +int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask) +{ + int devad, reg; + + if (!mmd_mask) { + /* Use absence of XGMII faults in lieu of link state */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, + MDIO_MMD_PHYXS, MDIO_STAT2); + return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT); + } + + for (devad = 0; mmd_mask; devad++) { + if (mmd_mask & (1 << devad)) { + mmd_mask &= ~(1 << devad); + + /* Reset the latched status and fault flags */ + mdio->mdio_read(mdio->dev, mdio->prtad, + devad, MDIO_STAT1); + if (devad == MDIO_MMD_PMAPMD || devad == MDIO_MMD_PCS || + devad == MDIO_MMD_PHYXS || devad == MDIO_MMD_DTEXS) + mdio->mdio_read(mdio->dev, mdio->prtad, + devad, MDIO_STAT2); + + /* Check the current status and fault flags */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, + devad, MDIO_STAT1); + if (reg < 0 || + (reg & (MDIO_STAT1_FAULT | MDIO_STAT1_LSTATUS)) != + MDIO_STAT1_LSTATUS) + return false; + } + } + + return true; +} +EXPORT_SYMBOL(mdio45_links_ok); + +/** + * mdio45_nway_restart - restart auto-negotiation for this interface + * @mdio: MDIO interface + * + * Returns 0 on success, negative on error. + */ +int mdio45_nway_restart(const struct mdio_if_info *mdio) +{ + if (!(mdio->mmds & MDIO_DEVS_AN)) + return -EOPNOTSUPP; + + mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1, + MDIO_AN_CTRL1_RESTART, true); + return 0; +} +EXPORT_SYMBOL(mdio45_nway_restart); + +static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr) +{ + u32 result = 0; + int reg; + + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr); + if (reg & ADVERTISE_10HALF) + result |= ADVERTISED_10baseT_Half; + if (reg & ADVERTISE_10FULL) + result |= ADVERTISED_10baseT_Full; + if (reg & ADVERTISE_100HALF) + result |= ADVERTISED_100baseT_Half; + if (reg & ADVERTISE_100FULL) + result |= ADVERTISED_100baseT_Full; + if (reg & ADVERTISE_PAUSE_CAP) + result |= ADVERTISED_Pause; + if (reg & ADVERTISE_PAUSE_ASYM) + result |= ADVERTISED_Asym_Pause; + return result; +} + +/** + * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET + * @mdio: MDIO interface + * @ecmd: Ethtool request structure + * @npage_adv: Modes currently advertised on next pages + * @npage_lpa: Modes advertised by link partner on next pages + * + * The @ecmd parameter is expected to have been cleared before calling + * mdio45_ethtool_gset_npage(). + * + * Since the CSRs for auto-negotiation using next pages are not fully + * standardised, this function does not attempt to decode them. The + * caller must pass them in. + */ +void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, + struct ethtool_cmd *ecmd, + u32 npage_adv, u32 npage_lpa) +{ + int reg; + u32 speed; + + BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22); + BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45); + + ecmd->transceiver = XCVR_INTERNAL; + ecmd->phy_address = mdio->prtad; + ecmd->mdio_support = + mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22); + + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL2); + switch (reg & MDIO_PMA_CTRL2_TYPE) { + case MDIO_PMA_CTRL2_10GBT: + case MDIO_PMA_CTRL2_1000BT: + case MDIO_PMA_CTRL2_100BTX: + case MDIO_PMA_CTRL2_10BT: + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_SPEED); + if (reg & MDIO_SPEED_10G) + ecmd->supported |= SUPPORTED_10000baseT_Full; + if (reg & MDIO_PMA_SPEED_1000) + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + if (reg & MDIO_PMA_SPEED_100) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_100baseT_Half); + if (reg & MDIO_PMA_SPEED_10) + ecmd->supported |= (SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half); + ecmd->advertising = ADVERTISED_TP; + break; + + case MDIO_PMA_CTRL2_10GBCX4: + ecmd->port = PORT_OTHER; + ecmd->supported = 0; + ecmd->advertising = 0; + break; + + case MDIO_PMA_CTRL2_10GBKX4: + case MDIO_PMA_CTRL2_10GBKR: + case MDIO_PMA_CTRL2_1000BKX: + ecmd->port = PORT_OTHER; + ecmd->supported = SUPPORTED_Backplane; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_EXTABLE); + if (reg & MDIO_PMA_EXTABLE_10GBKX4) + ecmd->supported |= SUPPORTED_10000baseKX4_Full; + if (reg & MDIO_PMA_EXTABLE_10GBKR) + ecmd->supported |= SUPPORTED_10000baseKR_Full; + if (reg & MDIO_PMA_EXTABLE_1000BKX) + ecmd->supported |= SUPPORTED_1000baseKX_Full; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBR_FECABLE); + if (reg & MDIO_PMA_10GBR_FECABLE_ABLE) + ecmd->supported |= SUPPORTED_10000baseR_FEC; + ecmd->advertising = ADVERTISED_Backplane; + break; + + /* All the other defined modes are flavours of optical */ + default: + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPPORTED_FIBRE; + ecmd->advertising = ADVERTISED_FIBRE; + break; + } + + if (mdio->mmds & MDIO_DEVS_AN) { + ecmd->supported |= SUPPORTED_Autoneg; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, + MDIO_CTRL1); + if (reg & MDIO_AN_CTRL1_ENABLE) { + ecmd->autoneg = AUTONEG_ENABLE; + ecmd->advertising |= + ADVERTISED_Autoneg | + mdio45_get_an(mdio, MDIO_AN_ADVERTISE) | + npage_adv; + } else { + ecmd->autoneg = AUTONEG_DISABLE; + } + } else { + ecmd->autoneg = AUTONEG_DISABLE; + } + + if (ecmd->autoneg) { + u32 modes = 0; + int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad, + MDIO_MMD_AN, MDIO_STAT1); + + /* If AN is complete and successful, report best common + * mode, otherwise report best advertised mode. */ + if (an_stat & MDIO_AN_STAT1_COMPLETE) { + ecmd->lp_advertising = + mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa; + if (an_stat & MDIO_AN_STAT1_LPABLE) + ecmd->lp_advertising |= ADVERTISED_Autoneg; + modes = ecmd->advertising & ecmd->lp_advertising; + } + if ((modes & ~ADVERTISED_Autoneg) == 0) + modes = ecmd->advertising; + + if (modes & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) { + speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseKX_Full)) { + speed = SPEED_1000; + ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { + speed = SPEED_100; + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); + } else { + speed = SPEED_10; + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); + } + } else { + /* Report forced settings */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL1); + speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) + * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10)); + ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX || + speed == SPEED_10000); + } + + ethtool_cmd_speed_set(ecmd, speed); + + /* 10GBASE-T MDI/MDI-X */ + if (ecmd->port == PORT_TP + && (ethtool_cmd_speed(ecmd) == SPEED_10000)) { + switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBT_SWAPPOL)) { + case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: + ecmd->eth_tp_mdix = ETH_TP_MDI; + break; + case 0: + ecmd->eth_tp_mdix = ETH_TP_MDI_X; + break; + default: + /* It's complicated... */ + ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + break; + } + } +} +EXPORT_SYMBOL(mdio45_ethtool_gset_npage); + +/** + * mdio45_ethtool_ksettings_get_npage - get settings for ETHTOOL_GLINKSETTINGS + * @mdio: MDIO interface + * @cmd: Ethtool request structure + * @npage_adv: Modes currently advertised on next pages + * @npage_lpa: Modes advertised by link partner on next pages + * + * The @cmd parameter is expected to have been cleared before calling + * mdio45_ethtool_ksettings_get_npage(). + * + * Since the CSRs for auto-negotiation using next pages are not fully + * standardised, this function does not attempt to decode them. The + * caller must pass them in. + */ +void mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio, + struct ethtool_link_ksettings *cmd, + u32 npage_adv, u32 npage_lpa) +{ + int reg; + u32 speed, supported = 0, advertising = 0, lp_advertising = 0; + + BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22); + BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45); + + cmd->base.phy_address = mdio->prtad; + cmd->base.mdio_support = + mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22); + + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL2); + switch (reg & MDIO_PMA_CTRL2_TYPE) { + case MDIO_PMA_CTRL2_10GBT: + case MDIO_PMA_CTRL2_1000BT: + case MDIO_PMA_CTRL2_100BTX: + case MDIO_PMA_CTRL2_10BT: + cmd->base.port = PORT_TP; + supported = SUPPORTED_TP; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_SPEED); + if (reg & MDIO_SPEED_10G) + supported |= SUPPORTED_10000baseT_Full; + if (reg & MDIO_PMA_SPEED_1000) + supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + if (reg & MDIO_PMA_SPEED_100) + supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_100baseT_Half); + if (reg & MDIO_PMA_SPEED_10) + supported |= (SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half); + advertising = ADVERTISED_TP; + break; + + case MDIO_PMA_CTRL2_10GBCX4: + cmd->base.port = PORT_OTHER; + supported = 0; + advertising = 0; + break; + + case MDIO_PMA_CTRL2_10GBKX4: + case MDIO_PMA_CTRL2_10GBKR: + case MDIO_PMA_CTRL2_1000BKX: + cmd->base.port = PORT_OTHER; + supported = SUPPORTED_Backplane; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_EXTABLE); + if (reg & MDIO_PMA_EXTABLE_10GBKX4) + supported |= SUPPORTED_10000baseKX4_Full; + if (reg & MDIO_PMA_EXTABLE_10GBKR) + supported |= SUPPORTED_10000baseKR_Full; + if (reg & MDIO_PMA_EXTABLE_1000BKX) + supported |= SUPPORTED_1000baseKX_Full; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBR_FECABLE); + if (reg & MDIO_PMA_10GBR_FECABLE_ABLE) + supported |= SUPPORTED_10000baseR_FEC; + advertising = ADVERTISED_Backplane; + break; + + /* All the other defined modes are flavours of optical */ + default: + cmd->base.port = PORT_FIBRE; + supported = SUPPORTED_FIBRE; + advertising = ADVERTISED_FIBRE; + break; + } + + if (mdio->mmds & MDIO_DEVS_AN) { + supported |= SUPPORTED_Autoneg; + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, + MDIO_CTRL1); + if (reg & MDIO_AN_CTRL1_ENABLE) { + cmd->base.autoneg = AUTONEG_ENABLE; + advertising |= + ADVERTISED_Autoneg | + mdio45_get_an(mdio, MDIO_AN_ADVERTISE) | + npage_adv; + } else { + cmd->base.autoneg = AUTONEG_DISABLE; + } + } else { + cmd->base.autoneg = AUTONEG_DISABLE; + } + + if (cmd->base.autoneg) { + u32 modes = 0; + int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad, + MDIO_MMD_AN, MDIO_STAT1); + + /* If AN is complete and successful, report best common + * mode, otherwise report best advertised mode. + */ + if (an_stat & MDIO_AN_STAT1_COMPLETE) { + lp_advertising = + mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa; + if (an_stat & MDIO_AN_STAT1_LPABLE) + lp_advertising |= ADVERTISED_Autoneg; + modes = advertising & lp_advertising; + } + if ((modes & ~ADVERTISED_Autoneg) == 0) + modes = advertising; + + if (modes & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) { + speed = SPEED_10000; + cmd->base.duplex = DUPLEX_FULL; + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseKX_Full)) { + speed = SPEED_1000; + cmd->base.duplex = !(modes & ADVERTISED_1000baseT_Half); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { + speed = SPEED_100; + cmd->base.duplex = !!(modes & ADVERTISED_100baseT_Full); + } else { + speed = SPEED_10; + cmd->base.duplex = !!(modes & ADVERTISED_10baseT_Full); + } + } else { + /* Report forced settings */ + reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_CTRL1); + speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) + * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10)); + cmd->base.duplex = (reg & MDIO_CTRL1_FULLDPLX || + speed == SPEED_10000); + } + + cmd->base.speed = speed; + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, + advertising); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising, + lp_advertising); + + /* 10GBASE-T MDI/MDI-X */ + if (cmd->base.port == PORT_TP && (cmd->base.speed == SPEED_10000)) { + switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, + MDIO_PMA_10GBT_SWAPPOL)) { + case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: + cmd->base.eth_tp_mdix = ETH_TP_MDI; + break; + case 0: + cmd->base.eth_tp_mdix = ETH_TP_MDI_X; + break; + default: + /* It's complicated... */ + cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID; + break; + } + } +} +EXPORT_SYMBOL(mdio45_ethtool_ksettings_get_npage); + +/** + * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs + * @mdio: MDIO interface + * @mii_data: MII ioctl data structure + * @cmd: MII ioctl command + * + * Returns 0 on success, negative on error. + */ +int mdio_mii_ioctl(const struct mdio_if_info *mdio, + struct mii_ioctl_data *mii_data, int cmd) +{ + int prtad, devad; + u16 addr = mii_data->reg_num; + + /* Validate/convert cmd to one of SIOC{G,S}MIIREG */ + switch (cmd) { + case SIOCGMIIPHY: + if (mdio->prtad == MDIO_PRTAD_NONE) + return -EOPNOTSUPP; + mii_data->phy_id = mdio->prtad; + cmd = SIOCGMIIREG; + break; + case SIOCGMIIREG: + case SIOCSMIIREG: + break; + default: + return -EOPNOTSUPP; + } + + /* Validate/convert phy_id */ + if ((mdio->mode_support & MDIO_SUPPORTS_C45) && + mdio_phy_id_is_c45(mii_data->phy_id)) { + prtad = mdio_phy_id_prtad(mii_data->phy_id); + devad = mdio_phy_id_devad(mii_data->phy_id); + } else if ((mdio->mode_support & MDIO_SUPPORTS_C22) && + mii_data->phy_id < 0x20) { + prtad = mii_data->phy_id; + devad = MDIO_DEVAD_NONE; + addr &= 0x1f; + } else if ((mdio->mode_support & MDIO_EMULATE_C22) && + mdio->prtad != MDIO_PRTAD_NONE && + mii_data->phy_id == mdio->prtad) { + /* Remap commonly-used MII registers. */ + prtad = mdio->prtad; + switch (addr) { + case MII_BMCR: + case MII_BMSR: + case MII_PHYSID1: + case MII_PHYSID2: + devad = __ffs(mdio->mmds); + break; + case MII_ADVERTISE: + case MII_LPA: + if (!(mdio->mmds & MDIO_DEVS_AN)) + return -EINVAL; + devad = MDIO_MMD_AN; + if (addr == MII_ADVERTISE) + addr = MDIO_AN_ADVERTISE; + else + addr = MDIO_AN_LPA; + break; + default: + return -EINVAL; + } + } else { + return -EINVAL; + } + + if (cmd == SIOCGMIIREG) { + int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr); + if (rc < 0) + return rc; + mii_data->val_out = rc; + return 0; + } else { + return mdio->mdio_write(mdio->dev, prtad, devad, addr, + mii_data->val_in); + } +} +EXPORT_SYMBOL(mdio_mii_ioctl); |