diff options
Diffstat (limited to 'drivers/net/phy/bcm87xx.c')
-rw-r--r-- | drivers/net/phy/bcm87xx.c | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c new file mode 100644 index 000000000..f7ebdcff5 --- /dev/null +++ b/drivers/net/phy/bcm87xx.c @@ -0,0 +1,220 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 - 2012 Cavium, Inc. + */ + +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/of.h> + +#define PHY_ID_BCM8706 0x0143bdc1 +#define PHY_ID_BCM8727 0x0143bff0 + +#define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 | 0x1000a) +#define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 | 0x30020) +#define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 | 0x40018) + +#define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002) +#define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005) + +#if IS_ENABLED(CONFIG_OF_MDIO) +/* Set and/or override some configuration registers based on the + * broadcom,c45-reg-init property stored in the of_node for the phydev. + * + * broadcom,c45-reg-init = <devid reg mask value>,...; + * + * There may be one or more sets of <devid reg mask value>: + * + * devid: which sub-device to use. + * reg: the register. + * mask: if non-zero, ANDed with existing register value. + * value: ORed with the masked value and written to the regiser. + * + */ +static int bcm87xx_of_reg_init(struct phy_device *phydev) +{ + const __be32 *paddr; + const __be32 *paddr_end; + int len, ret; + + if (!phydev->mdio.dev.of_node) + return 0; + + paddr = of_get_property(phydev->mdio.dev.of_node, + "broadcom,c45-reg-init", &len); + if (!paddr) + return 0; + + paddr_end = paddr + (len /= sizeof(*paddr)); + + ret = 0; + + while (paddr + 3 < paddr_end) { + u16 devid = be32_to_cpup(paddr++); + u16 reg = be32_to_cpup(paddr++); + u16 mask = be32_to_cpup(paddr++); + u16 val_bits = be32_to_cpup(paddr++); + int val; + u32 regnum = MII_ADDR_C45 | (devid << 16) | reg; + val = 0; + if (mask) { + val = phy_read(phydev, regnum); + if (val < 0) { + ret = val; + goto err; + } + val &= mask; + } + val |= val_bits; + + ret = phy_write(phydev, regnum, val); + if (ret < 0) + goto err; + } +err: + return ret; +} +#else +static int bcm87xx_of_reg_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + +static int bcm87xx_config_init(struct phy_device *phydev) +{ + phydev->supported = SUPPORTED_10000baseR_FEC; + phydev->advertising = ADVERTISED_10000baseR_FEC; + phydev->state = PHY_NOLINK; + phydev->autoneg = AUTONEG_DISABLE; + + bcm87xx_of_reg_init(phydev); + + return 0; +} + +static int bcm87xx_config_aneg(struct phy_device *phydev) +{ + return -EINVAL; +} + +static int bcm87xx_read_status(struct phy_device *phydev) +{ + int rx_signal_detect; + int pcs_status; + int xgxs_lane_status; + + rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT); + if (rx_signal_detect < 0) + return rx_signal_detect; + + if ((rx_signal_detect & 1) == 0) + goto no_link; + + pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS); + if (pcs_status < 0) + return pcs_status; + + if ((pcs_status & 1) == 0) + goto no_link; + + xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS); + if (xgxs_lane_status < 0) + return xgxs_lane_status; + + if ((xgxs_lane_status & 0x1000) == 0) + goto no_link; + + phydev->speed = 10000; + phydev->link = 1; + phydev->duplex = 1; + return 0; + +no_link: + phydev->link = 0; + return 0; +} + +static int bcm87xx_config_intr(struct phy_device *phydev) +{ + int reg, err; + + reg = phy_read(phydev, BCM87XX_LASI_CONTROL); + + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg |= 1; + else + reg &= ~1; + + err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg); + return err; +} + +static int bcm87xx_did_interrupt(struct phy_device *phydev) +{ + int reg; + + reg = phy_read(phydev, BCM87XX_LASI_STATUS); + + if (reg < 0) { + phydev_err(phydev, + "Error: Read of BCM87XX_LASI_STATUS failed: %d\n", + reg); + return 0; + } + return (reg & 1) != 0; +} + +static int bcm87xx_ack_interrupt(struct phy_device *phydev) +{ + /* Reading the LASI status clears it. */ + bcm87xx_did_interrupt(phydev); + return 0; +} + +static int bcm8706_match_phy_device(struct phy_device *phydev) +{ + return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706; +} + +static int bcm8727_match_phy_device(struct phy_device *phydev) +{ + return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727; +} + +static struct phy_driver bcm87xx_driver[] = { +{ + .phy_id = PHY_ID_BCM8706, + .phy_id_mask = 0xffffffff, + .name = "Broadcom BCM8706", + .flags = PHY_HAS_INTERRUPT, + .config_init = bcm87xx_config_init, + .config_aneg = bcm87xx_config_aneg, + .read_status = bcm87xx_read_status, + .ack_interrupt = bcm87xx_ack_interrupt, + .config_intr = bcm87xx_config_intr, + .did_interrupt = bcm87xx_did_interrupt, + .match_phy_device = bcm8706_match_phy_device, +}, { + .phy_id = PHY_ID_BCM8727, + .phy_id_mask = 0xffffffff, + .name = "Broadcom BCM8727", + .flags = PHY_HAS_INTERRUPT, + .config_init = bcm87xx_config_init, + .config_aneg = bcm87xx_config_aneg, + .read_status = bcm87xx_read_status, + .ack_interrupt = bcm87xx_ack_interrupt, + .config_intr = bcm87xx_config_intr, + .did_interrupt = bcm87xx_did_interrupt, + .match_phy_device = bcm8727_match_phy_device, +} }; + +module_phy_driver(bcm87xx_driver); + +MODULE_LICENSE("GPL"); |