diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/sdio.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/sdio.h | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h new file mode 100644 index 000000000..453eb6263 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/sdio.h @@ -0,0 +1,227 @@ +/* + * Copyright (c) 2004-2011 Atheros Communications Inc. + * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. + * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _SDIO_H_ +#define _SDIO_H_ + +#define ATH10K_HIF_MBOX_BLOCK_SIZE 256 + +#define QCA_MANUFACTURER_ID_BASE GENMASK(11, 8) +#define QCA_MANUFACTURER_ID_AR6005_BASE 0x5 +#define QCA_MANUFACTURER_ID_QCA9377_BASE 0x7 +#define QCA_SDIO_ID_AR6005_BASE 0x500 +#define QCA_SDIO_ID_QCA9377_BASE 0x700 +#define QCA_MANUFACTURER_ID_REV_MASK 0x00FF +#define QCA_MANUFACTURER_CODE 0x271 /* Qualcomm/Atheros */ + +#define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/ + +/* Mailbox address in SDIO address space */ +#define ATH10K_HIF_MBOX_BASE_ADDR 0x1000 +#define ATH10K_HIF_MBOX_WIDTH 0x800 + +#define ATH10K_HIF_MBOX_TOT_WIDTH \ + (ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH) + +#define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000 +#define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024) +#define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024) +#define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024) +#define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024) + +#define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \ + (ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr)) + +#define ATH10K_HIF_MBOX_NUM_MAX 4 +#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 64 + +#define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ) + +/* HTC runs over mailbox 0 */ +#define ATH10K_HTC_MAILBOX 0 +#define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX) + +/* GMBOX addresses */ +#define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000 +#define ATH10K_HIF_GMBOX_WIDTH 0x4000 + +/* Modified versions of the sdio.h macros. + * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET} + * macros in bitfield.h, so we define our own macros here. + */ +#define ATH10K_SDIO_DRIVE_DTSX_MASK \ + (SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT) + +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0 +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1 +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2 +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3 + +/* SDIO CCCR register definitions */ +#define CCCR_SDIO_IRQ_MODE_REG 0xF0 +#define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16 + +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2 + +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02 +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04 +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08 + +#define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0 +#define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0 + +/* mode to enable special 4-bit interrupt assertion without clock */ +#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0) +#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1) + +#define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01 + +/* The theoretical maximum number of RX messages that can be fetched + * from the mbox interrupt handler in one loop is derived in the following + * way: + * + * Let's assume that each packet in a bundle of the maximum bundle size + * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set + * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE). + * + * in this case the driver must allocate + * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) skb's. + */ +#define ATH10K_SDIO_MAX_RX_MSGS \ + (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) + +#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u +#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF +#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000 + +struct ath10k_sdio_bus_request { + struct list_head list; + + /* sdio address */ + u32 address; + + struct sk_buff *skb; + enum ath10k_htc_ep_id eid; + int status; + /* Specifies if the current request is an HTC message. + * If not, the eid is not applicable an the TX completion handler + * associated with the endpoint will not be invoked. + */ + bool htc_msg; + /* Completion that (if set) will be invoked for non HTC requests + * (htc_msg == false) when the request has been processed. + */ + struct completion *comp; +}; + +struct ath10k_sdio_rx_data { + struct sk_buff *skb; + size_t alloc_len; + size_t act_len; + enum ath10k_htc_ep_id eid; + bool part_of_bundle; + bool last_in_bundle; + bool trailer_only; + int status; +}; + +struct ath10k_sdio_irq_proc_regs { + u8 host_int_status; + u8 cpu_int_status; + u8 error_int_status; + u8 counter_int_status; + u8 mbox_frame; + u8 rx_lookahead_valid; + u8 host_int_status2; + u8 gmbox_rx_avail; + __le32 rx_lookahead[2]; + __le32 rx_gmbox_lookahead_alias[2]; +}; + +struct ath10k_sdio_irq_enable_regs { + u8 int_status_en; + u8 cpu_int_status_en; + u8 err_int_status_en; + u8 cntr_int_status_en; +}; + +struct ath10k_sdio_irq_data { + /* protects irq_proc_reg and irq_en_reg below. + * We use a mutex here and not a spinlock since we will have the + * mutex locked while calling the sdio_memcpy_ functions. + * These function require non atomic context, and hence, spinlocks + * can be held while calling these functions. + */ + struct mutex mtx; + struct ath10k_sdio_irq_proc_regs *irq_proc_reg; + struct ath10k_sdio_irq_enable_regs *irq_en_reg; +}; + +struct ath10k_mbox_ext_info { + u32 htc_ext_addr; + u32 htc_ext_sz; +}; + +struct ath10k_mbox_info { + u32 htc_addr; + struct ath10k_mbox_ext_info ext_info[2]; + u32 block_size; + u32 block_mask; + u32 gmbox_addr; + u32 gmbox_sz; +}; + +struct ath10k_sdio { + struct sdio_func *func; + + struct ath10k_mbox_info mbox_info; + bool swap_mbox; + u32 mbox_addr[ATH10K_HTC_EP_COUNT]; + u32 mbox_size[ATH10K_HTC_EP_COUNT]; + + /* available bus requests */ + struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM]; + /* free list of bus requests */ + struct list_head bus_req_freeq; + /* protects access to bus_req_freeq */ + spinlock_t lock; + + struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS]; + size_t n_rx_pkts; + + struct ath10k *ar; + struct ath10k_sdio_irq_data irq_data; + + /* temporary buffer for BMI requests */ + u8 *bmi_buf; + + bool is_disabled; + + struct workqueue_struct *workqueue; + struct work_struct wr_async_work; + struct list_head wr_asyncq; + /* protects access to wr_asyncq */ + spinlock_t wr_async_lock; +}; + +static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar) +{ + return (struct ath10k_sdio *)ar->drv_priv; +} + +#endif |