diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlegacy/4965-mac.c')
| -rw-r--r-- | drivers/net/wireless/intel/iwlegacy/4965-mac.c | 6870 |
1 files changed, 6870 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c new file mode 100644 index 000000000..6fc51c74c --- /dev/null +++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c @@ -0,0 +1,6870 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci-aspm.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> + +#include <net/mac80211.h> + +#include <asm/div64.h> + +#define DRV_NAME "iwl4965" + +#include "common.h" +#include "4965.h" + +/****************************************************************************** + * + * module boiler plate + * + ******************************************************************************/ + +/* + * module name, copyright, version, etc. + */ +#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" + +#ifdef CONFIG_IWLEGACY_DEBUG +#define VD "d" +#else +#define VD +#endif + +#define DRV_VERSION IWLWIFI_VERSION VD + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("iwl4965"); + +void +il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status) +{ + if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { + IL_ERR("Tx flush command to flush out all frames\n"); + if (!test_bit(S_EXIT_PENDING, &il->status)) + queue_work(il->workqueue, &il->tx_flush); + } +} + +/* + * EEPROM + */ +struct il_mod_params il4965_mod_params = { + .restart_fw = 1, + /* the rest are 0 by default */ +}; + +void +il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].page != NULL) { + pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __il_free_pages(il, rxq->pool[i].page); + rxq->pool[i].page = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + for (i = 0; i < RX_QUEUE_SIZE; i++) + rxq->queue[i] = NULL; + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->write_actual = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} + +int +il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) +{ + u32 rb_size; + const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ + u32 rb_timeout = 0; + + if (il->cfg->mod_params->amsdu_size_8K) + rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; + else + rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; + + /* Stop Rx DMA */ + il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); + + /* Reset driver's Rx queue write idx */ + il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); + + /* Tell device where to find RBD circular buffer in DRAM */ + il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8)); + + /* Tell device where in DRAM to update its Rx status */ + il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); + + /* Enable Rx DMA + * Direct rx interrupts to hosts + * Rx buffer size 4 or 8k + * RB timeout 0x10 + * 256 RBDs + */ + il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, + FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | + FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | + rb_size | + (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) | + (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); + + /* Set interrupt coalescing timer to default (2048 usecs) */ + il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF); + + return 0; +} + +static void +il4965_set_pwr_vmain(struct il_priv *il) +{ +/* + * (for documentation purposes) + * to set power to V_AUX, do: + + if (pci_pme_capable(il->pci_dev, PCI_D3cold)) + il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + */ + + il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); +} + +int +il4965_hw_nic_init(struct il_priv *il) +{ + unsigned long flags; + struct il_rx_queue *rxq = &il->rxq; + int ret; + + spin_lock_irqsave(&il->lock, flags); + il_apm_init(il); + /* Set interrupt coalescing calibration timer to default (512 usecs) */ + il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF); + spin_unlock_irqrestore(&il->lock, flags); + + il4965_set_pwr_vmain(il); + il4965_nic_config(il); + + /* Allocate the RX queue, or reset if it is already allocated */ + if (!rxq->bd) { + ret = il_rx_queue_alloc(il); + if (ret) { + IL_ERR("Unable to initialize Rx queue\n"); + return -ENOMEM; + } + } else + il4965_rx_queue_reset(il, rxq); + + il4965_rx_replenish(il); + + il4965_rx_init(il, rxq); + + spin_lock_irqsave(&il->lock, flags); + + rxq->need_update = 1; + il_rx_queue_update_write_ptr(il, rxq); + + spin_unlock_irqrestore(&il->lock, flags); + + /* Allocate or reset and init all Tx and Command queues */ + if (!il->txq) { + ret = il4965_txq_ctx_alloc(il); + if (ret) + return ret; + } else + il4965_txq_ctx_reset(il); + + set_bit(S_INIT, &il->status); + + return 0; +} + +/** + * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr + */ +static inline __le32 +il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) +{ + return cpu_to_le32((u32) (dma_addr >> 8)); +} + +/** + * il4965_rx_queue_restock - refill RX queue from pre-allocated pool + * + * If there are slots in the RX queue that need to be restocked, + * and we have free pre-allocated buffers, fill the ranks as much + * as we can, pulling from rx_free. + * + * This moves the 'write' idx forward to catch up with 'processed', and + * also updates the memory address in the firmware to reference the new + * target buffer. + */ +void +il4965_rx_queue_restock(struct il_priv *il) +{ + struct il_rx_queue *rxq = &il->rxq; + struct list_head *element; + struct il_rx_buf *rxb; + unsigned long flags; + + spin_lock_irqsave(&rxq->lock, flags); + while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { + /* The overwritten rxb must be a used one */ + rxb = rxq->queue[rxq->write]; + BUG_ON(rxb && rxb->page); + + /* Get next free Rx buffer, remove from free list */ + element = rxq->rx_free.next; + rxb = list_entry(element, struct il_rx_buf, list); + list_del(element); + + /* Point to Rx buffer via next RBD in circular buffer */ + rxq->bd[rxq->write] = + il4965_dma_addr2rbd_ptr(il, rxb->page_dma); + rxq->queue[rxq->write] = rxb; + rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; + rxq->free_count--; + } + spin_unlock_irqrestore(&rxq->lock, flags); + /* If the pre-allocated buffer pool is dropping low, schedule to + * refill it */ + if (rxq->free_count <= RX_LOW_WATERMARK) + queue_work(il->workqueue, &il->rx_replenish); + + /* If we've added more space for the firmware to place data, tell it. + * Increment device's write pointer in multiples of 8. */ + if (rxq->write_actual != (rxq->write & ~0x7)) { + spin_lock_irqsave(&rxq->lock, flags); + rxq->need_update = 1; + spin_unlock_irqrestore(&rxq->lock, flags); + il_rx_queue_update_write_ptr(il, rxq); + } +} + +/** + * il4965_rx_replenish - Move all used packet from rx_used to rx_free + * + * When moving to rx_free an SKB is allocated for the slot. + * + * Also restock the Rx queue via il_rx_queue_restock. + * This is called as a scheduled work item (except for during initialization) + */ +static void +il4965_rx_allocate(struct il_priv *il, gfp_t priority) +{ + struct il_rx_queue *rxq = &il->rxq; + struct list_head *element; + struct il_rx_buf *rxb; + struct page *page; + dma_addr_t page_dma; + unsigned long flags; + gfp_t gfp_mask = priority; + + while (1) { + spin_lock_irqsave(&rxq->lock, flags); + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + return; + } + spin_unlock_irqrestore(&rxq->lock, flags); + + if (rxq->free_count > RX_LOW_WATERMARK) + gfp_mask |= __GFP_NOWARN; + + if (il->hw_params.rx_page_order > 0) + gfp_mask |= __GFP_COMP; + + /* Alloc a new receive buffer */ + page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); + if (!page) { + if (net_ratelimit()) + D_INFO("alloc_pages failed, " "order: %d\n", + il->hw_params.rx_page_order); + + if (rxq->free_count <= RX_LOW_WATERMARK && + net_ratelimit()) + IL_ERR("Failed to alloc_pages with %s. " + "Only %u free buffers remaining.\n", + priority == + GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", + rxq->free_count); + /* We don't reschedule replenish work here -- we will + * call the restock method and if it still needs + * more buffers it will schedule replenish */ + return; + } + + /* Get physical address of the RB */ + page_dma = + pci_map_page(il->pci_dev, page, 0, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { + __free_pages(page, il->hw_params.rx_page_order); + break; + } + + spin_lock_irqsave(&rxq->lock, flags); + + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + pci_unmap_page(il->pci_dev, page_dma, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __free_pages(page, il->hw_params.rx_page_order); + return; + } + + element = rxq->rx_used.next; + rxb = list_entry(element, struct il_rx_buf, list); + list_del(element); + + BUG_ON(rxb->page); + + rxb->page = page; + rxb->page_dma = page_dma; + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + il->alloc_rxb_page++; + + spin_unlock_irqrestore(&rxq->lock, flags); + } +} + +void +il4965_rx_replenish(struct il_priv *il) +{ + unsigned long flags; + + il4965_rx_allocate(il, GFP_KERNEL); + + spin_lock_irqsave(&il->lock, flags); + il4965_rx_queue_restock(il); + spin_unlock_irqrestore(&il->lock, flags); +} + +void +il4965_rx_replenish_now(struct il_priv *il) +{ + il4965_rx_allocate(il, GFP_ATOMIC); + + il4965_rx_queue_restock(il); +} + +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +void +il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].page != NULL) { + pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __il_free_pages(il, rxq->pool[i].page); + rxq->pool[i].page = NULL; + } + } + + dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->bd_dma); + dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), + rxq->rb_stts, rxq->rb_stts_dma); + rxq->bd = NULL; + rxq->rb_stts = NULL; +} + +int +il4965_rxq_stop(struct il_priv *il) +{ + int ret; + + _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); + ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG, + FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, + FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, + 1000); + if (ret < 0) + IL_ERR("Can't stop Rx DMA.\n"); + + return 0; +} + +int +il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band) +{ + int idx = 0; + int band_offset = 0; + + /* HT rate format: mac80211 wants an MCS number, which is just LSB */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + return idx; + /* Legacy rate format, search for match in table */ + } else { + if (band == NL80211_BAND_5GHZ) + band_offset = IL_FIRST_OFDM_RATE; + for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++) + if (il_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx - band_offset; + } + + return -1; +} + +static int +il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host. */ + struct il4965_rx_non_cfg_phy *ncphy = + (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 agc = + (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >> + IL49_AGC_DB_POS; + + u32 valid_antennae = + (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK) + >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; + u8 max_rssi = 0; + u32 i; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. */ + for (i = 0; i < 3; i++) + if (valid_antennae & (1 << i)) + max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); + + D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], + max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IL4965_RSSI_OFFSET; +} + +static u32 +il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in) +{ + u32 decrypt_out = 0; + + if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == + RX_RES_STATUS_STATION_FOUND) + decrypt_out |= + (RX_RES_STATUS_STATION_FOUND | + RX_RES_STATUS_NO_STATION_INFO_MISMATCH); + + decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); + + /* packet was not encrypted */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_NONE) + return decrypt_out; + + /* packet was encrypted with unknown alg */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_ERR) + return decrypt_out; + + /* decryption was not done in HW */ + if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != + RX_MPDU_RES_STATUS_DEC_DONE_MSK) + return decrypt_out; + + switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { + + case RX_RES_STATUS_SEC_TYPE_CCMP: + /* alg is CCM: check MIC only */ + if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) + /* Bad MIC */ + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + + break; + + case RX_RES_STATUS_SEC_TYPE_TKIP: + if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { + /* Bad TTAK */ + decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; + break; + } + /* fall through if TTAK OK */ + default: + if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + break; + } + + D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", decrypt_in, decrypt_out); + + return decrypt_out; +} + +#define SMALL_PACKET_SIZE 256 + +static void +il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, + u32 len, u32 ampdu_status, struct il_rx_buf *rxb, + struct ieee80211_rx_status *stats) +{ + struct sk_buff *skb; + __le16 fc = hdr->frame_control; + + /* We only process data packets if the interface is open */ + if (unlikely(!il->is_open)) { + D_DROP("Dropping packet while interface is not open.\n"); + return; + } + + if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { + il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); + D_INFO("Woke queues - frame received on passive channel\n"); + } + + /* In case of HW accelerated crypto and bad decryption, drop */ + if (!il->cfg->mod_params->sw_crypto && + il_set_decrypted_flag(il, hdr, ampdu_status, stats)) + return; + + skb = dev_alloc_skb(SMALL_PACKET_SIZE); + if (!skb) { + IL_ERR("dev_alloc_skb failed\n"); + return; + } + + if (len <= SMALL_PACKET_SIZE) { + skb_put_data(skb, hdr, len); + } else { + skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), + len, PAGE_SIZE << il->hw_params.rx_page_order); + il->alloc_rxb_page--; + rxb->page = NULL; + } + + il_update_stats(il, false, fc, len); + memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); + + ieee80211_rx(il->hw, skb); +} + +/* Called for N_RX (legacy ABG frames), or + * N_RX_MPDU (HT high-throughput N frames). */ +static void +il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct ieee80211_hdr *header; + struct ieee80211_rx_status rx_status = {}; + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct il_rx_phy_res *phy_res; + __le32 rx_pkt_status; + struct il_rx_mpdu_res_start *amsdu; + u32 len; + u32 ampdu_status; + u32 rate_n_flags; + + /** + * N_RX and N_RX_MPDU are handled differently. + * N_RX: physical layer info is in this buffer + * N_RX_MPDU: physical layer info was sent in separate + * command and cached in il->last_phy_res + * + * Here we set up local variables depending on which command is + * received. + */ + if (pkt->hdr.cmd == N_RX) { + phy_res = (struct il_rx_phy_res *)pkt->u.raw; + header = + (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) + + phy_res->cfg_phy_cnt); + + len = le16_to_cpu(phy_res->byte_count); + rx_pkt_status = + *(__le32 *) (pkt->u.raw + sizeof(*phy_res) + + phy_res->cfg_phy_cnt + len); + ampdu_status = le32_to_cpu(rx_pkt_status); + } else { + if (!il->_4965.last_phy_res_valid) { + IL_ERR("MPDU frame without cached PHY data\n"); + return; + } + phy_res = &il->_4965.last_phy_res; + amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw; + header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); + len = le16_to_cpu(amsdu->byte_count); + rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len); + ampdu_status = + il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status)); + } + + if ((unlikely(phy_res->cfg_phy_cnt > 20))) { + D_DROP("dsp size out of range [0,20]: %d\n", + phy_res->cfg_phy_cnt); + return; + } + + if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || + !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { + D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status)); + return; + } + + /* This will be used in several places later */ + rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); + + /* rx_status carries information about the packet to mac80211 */ + rx_status.mactime = le64_to_cpu(phy_res->timestamp); + rx_status.band = + (phy_res-> + phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ : + NL80211_BAND_5GHZ; + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), + rx_status.band); + rx_status.rate_idx = + il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); + rx_status.flag = 0; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_MACTIME_START; */ + + il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); + + /* Find max signal strength (dBm) among 3 antenna/receiver chains */ + rx_status.signal = il4965_calc_rssi(il, phy_res); + + D_STATS("Rssi %d, TSF %llu\n", rx_status.signal, + (unsigned long long)rx_status.mactime); + + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bit field. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favor of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = + (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> + RX_RES_PHY_FLAGS_ANTENNA_POS; + + /* set the preamble flag if appropriate */ + if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; + + /* Set up the HT phy flags */ + if (rate_n_flags & RATE_MCS_HT_MSK) + rx_status.encoding = RX_ENC_HT; + if (rate_n_flags & RATE_MCS_HT40_MSK) + rx_status.bw = RATE_INFO_BW_40; + else + rx_status.bw = RATE_INFO_BW_20; + if (rate_n_flags & RATE_MCS_SGI_MSK) + rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI; + + if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) { + /* We know which subframes of an A-MPDU belong + * together since we get a single PHY response + * from the firmware for all of them. + */ + + rx_status.flag |= RX_FLAG_AMPDU_DETAILS; + rx_status.ampdu_reference = il->_4965.ampdu_ref; + } + + il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb, + &rx_status); +} + +/* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY). + * This will be used later in il_hdl_rx() for N_RX_MPDU. */ +static void +il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + il->_4965.last_phy_res_valid = true; + il->_4965.ampdu_ref++; + memcpy(&il->_4965.last_phy_res, pkt->u.raw, + sizeof(struct il_rx_phy_res)); +} + +static int +il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif, + enum nl80211_band band, u8 is_active, + u8 n_probes, struct il_scan_channel *scan_ch) +{ + struct ieee80211_channel *chan; + const struct ieee80211_supported_band *sband; + const struct il_channel_info *ch_info; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added, i; + u16 channel; + + sband = il_get_hw_mode(il, band); + if (!sband) + return 0; + + active_dwell = il_get_active_dwell_time(il, band, n_probes); + passive_dwell = il_get_passive_dwell_time(il, band, vif); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { + chan = il->scan_request->channels[i]; + + if (chan->band != band) + continue; + + channel = chan->hw_value; + scan_ch->channel = cpu_to_le16(channel); + + ch_info = il_get_channel_info(il, band, channel); + if (!il_is_channel_valid(ch_info)) { + D_SCAN("Channel %d is INVALID for this band.\n", + channel); + continue; + } + + if (!is_active || il_is_channel_passive(ch_info) || + (chan->flags & IEEE80211_CHAN_NO_IR)) + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + else + scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; + + if (n_probes) + scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes); + + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + if (band == NL80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + + D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel, + le32_to_cpu(scan_ch->type), + (scan_ch-> + type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE", + (scan_ch-> + type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell : + passive_dwell); + + scan_ch++; + added++; + } + + D_SCAN("total channels to scan %d\n", added); + return added; +} + +static void +il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid) +{ + int i; + u8 ind = *ant; + + for (i = 0; i < RATE_ANT_NUM - 1; i++) { + ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; + if (valid & BIT(ind)) { + *ant = ind; + return; + } + } +} + +int +il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) +{ + struct il_host_cmd cmd = { + .id = C_SCAN, + .len = sizeof(struct il_scan_cmd), + .flags = CMD_SIZE_HUGE, + }; + struct il_scan_cmd *scan; + u32 rate_flags = 0; + u16 cmd_len; + u16 rx_chain = 0; + enum nl80211_band band; + u8 n_probes = 0; + u8 rx_ant = il->hw_params.valid_rx_ant; + u8 rate; + bool is_active = false; + int chan_mod; + u8 active_chains; + u8 scan_tx_antennas = il->hw_params.valid_tx_ant; + int ret; + + lockdep_assert_held(&il->mutex); + + if (!il->scan_cmd) { + il->scan_cmd = + kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE, + GFP_KERNEL); + if (!il->scan_cmd) { + D_SCAN("fail to allocate memory for scan\n"); + return -ENOMEM; + } + } + scan = il->scan_cmd; + memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE); + + scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; + scan->quiet_time = IL_ACTIVE_QUIET_TIME; + + if (il_is_any_associated(il)) { + u16 interval; + u32 extra; + u32 suspend_time = 100; + u32 scan_suspend_time = 100; + + D_INFO("Scanning while associated...\n"); + interval = vif->bss_conf.beacon_int; + + scan->suspend_time = 0; + scan->max_out_time = cpu_to_le32(200 * 1024); + if (!interval) + interval = suspend_time; + + extra = (suspend_time / interval) << 22; + scan_suspend_time = + (extra | ((suspend_time % interval) * 1024)); + scan->suspend_time = cpu_to_le32(scan_suspend_time); + D_SCAN("suspend_time 0x%X beacon interval %d\n", + scan_suspend_time, interval); + } + + if (il->scan_request->n_ssids) { + int i, p = 0; + D_SCAN("Kicking off active scan\n"); + for (i = 0; i < il->scan_request->n_ssids; i++) { + /* always does wildcard anyway */ + if (!il->scan_request->ssids[i].ssid_len) + continue; + scan->direct_scan[p].id = WLAN_EID_SSID; + scan->direct_scan[p].len = + il->scan_request->ssids[i].ssid_len; + memcpy(scan->direct_scan[p].ssid, + il->scan_request->ssids[i].ssid, + il->scan_request->ssids[i].ssid_len); + n_probes++; + p++; + } + is_active = true; + } else + D_SCAN("Start passive scan.\n"); + + scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; + scan->tx_cmd.sta_id = il->hw_params.bcast_id; + scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + switch (il->scan_band) { + case NL80211_BAND_2GHZ: + scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; + chan_mod = + le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >> + RXON_FLG_CHANNEL_MODE_POS; + if (chan_mod == CHANNEL_MODE_PURE_40) { + rate = RATE_6M_PLCP; + } else { + rate = RATE_1M_PLCP; + rate_flags = RATE_MCS_CCK_MSK; + } + break; + case NL80211_BAND_5GHZ: + rate = RATE_6M_PLCP; + break; + default: + IL_WARN("Invalid scan band\n"); + return -EIO; + } + + /* + * If active scanning is requested but a certain channel is + * marked passive, we can do active scanning if we detect + * transmissions. + * + * There is an issue with some firmware versions that triggers + * a sysassert on a "good CRC threshold" of zero (== disabled), + * on a radar channel even though this means that we should NOT + * send probes. + * + * The "good CRC threshold" is the number of frames that we + * need to receive during our dwell time on a channel before + * sending out probes -- setting this to a huge value will + * mean we never reach it, but at the same time work around + * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER + * here instead of IL_GOOD_CRC_TH_DISABLED. + */ + scan->good_CRC_th = + is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; + + band = il->scan_band; + + if (il->cfg->scan_rx_antennas[band]) + rx_ant = il->cfg->scan_rx_antennas[band]; + + il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas); + rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS; + scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags); + + /* In power save mode use one chain, otherwise use all chains */ + if (test_bit(S_POWER_PMI, &il->status)) { + /* rx_ant has been set to all valid chains previously */ + active_chains = + rx_ant & ((u8) (il->chain_noise_data.active_chains)); + if (!active_chains) + active_chains = rx_ant; + + D_SCAN("chain_noise_data.active_chains: %u\n", + il->chain_noise_data.active_chains); + + rx_ant = il4965_first_antenna(active_chains); + } + + /* MIMO is not used here, but value is required */ + rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; + rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; + scan->rx_chain = cpu_to_le16(rx_chain); + + cmd_len = + il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, + vif->addr, il->scan_request->ie, + il->scan_request->ie_len, + IL_MAX_SCAN_SIZE - sizeof(*scan)); + scan->tx_cmd.len = cpu_to_le16(cmd_len); + + scan->filter_flags |= + (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK); + + scan->channel_count = + il4965_get_channels_for_scan(il, vif, band, is_active, n_probes, + (void *)&scan->data[cmd_len]); + if (scan->channel_count == 0) { + D_SCAN("channel count %d\n", scan->channel_count); + return -EIO; + } + + cmd.len += + le16_to_cpu(scan->tx_cmd.len) + + scan->channel_count * sizeof(struct il_scan_channel); + cmd.data = scan; + scan->len = cpu_to_le16(cmd.len); + + set_bit(S_SCAN_HW, &il->status); + + ret = il_send_cmd_sync(il, &cmd); + if (ret) + clear_bit(S_SCAN_HW, &il->status); + + return ret; +} + +int +il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, + bool add) +{ + struct il_vif_priv *vif_priv = (void *)vif->drv_priv; + + if (add) + return il4965_add_bssid_station(il, vif->bss_conf.bssid, + &vif_priv->ibss_bssid_sta_id); + return il_remove_station(il, vif_priv->ibss_bssid_sta_id, + vif->bss_conf.bssid); +} + +void +il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed) +{ + lockdep_assert_held(&il->sta_lock); + + if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed) + il->stations[sta_id].tid[tid].tfds_in_queue -= freed; + else { + D_TX("free more than tfds_in_queue (%u:%d)\n", + il->stations[sta_id].tid[tid].tfds_in_queue, freed); + il->stations[sta_id].tid[tid].tfds_in_queue = 0; + } +} + +#define IL_TX_QUEUE_MSK 0xfffff + +static bool +il4965_is_single_rx_stream(struct il_priv *il) +{ + return il->current_ht_config.smps == IEEE80211_SMPS_STATIC || + il->current_ht_config.single_chain_sufficient; +} + +#define IL_NUM_RX_CHAINS_MULTIPLE 3 +#define IL_NUM_RX_CHAINS_SINGLE 2 +#define IL_NUM_IDLE_CHAINS_DUAL 2 +#define IL_NUM_IDLE_CHAINS_SINGLE 1 + +/* + * Determine how many receiver/antenna chains to use. + * + * More provides better reception via diversity. Fewer saves power + * at the expense of throughput, but only when not in powersave to + * start with. + * + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int +il4965_get_active_rx_chain_count(struct il_priv *il) +{ + /* # of Rx chains to use when expecting MIMO. */ + if (il4965_is_single_rx_stream(il)) + return IL_NUM_RX_CHAINS_SINGLE; + else + return IL_NUM_RX_CHAINS_MULTIPLE; +} + +/* + * When we are in power saving mode, unless device support spatial + * multiplexing power save, use the active count for rx chain count. + */ +static int +il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt) +{ + /* # Rx chains when idling, depending on SMPS mode */ + switch (il->current_ht_config.smps) { + case IEEE80211_SMPS_STATIC: + case IEEE80211_SMPS_DYNAMIC: + return IL_NUM_IDLE_CHAINS_SINGLE; + case IEEE80211_SMPS_OFF: + return active_cnt; + default: + WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps); + return active_cnt; + } +} + +/* up to 4 chains */ +static u8 +il4965_count_chain_bitmap(u32 chain_bitmap) +{ + u8 res; + res = (chain_bitmap & BIT(0)) >> 0; + res += (chain_bitmap & BIT(1)) >> 1; + res += (chain_bitmap & BIT(2)) >> 2; + res += (chain_bitmap & BIT(3)) >> 3; + return res; +} + +/** + * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void +il4965_set_rxon_chain(struct il_priv *il) +{ + bool is_single = il4965_is_single_rx_stream(il); + bool is_cam = !test_bit(S_POWER_PMI, &il->status); + u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; + u32 active_chains; + u16 rx_chain; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, il4965_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + if (il->chain_noise_data.active_chains) + active_chains = il->chain_noise_data.active_chains; + else + active_chains = il->hw_params.valid_rx_ant; + + rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; + + /* How many receivers should we use? */ + active_rx_cnt = il4965_get_active_rx_chain_count(il); + idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt); + + /* correct rx chain count according hw settings + * and chain noise calibration + */ + valid_rx_cnt = il4965_count_chain_bitmap(active_chains); + if (valid_rx_cnt < active_rx_cnt) + active_rx_cnt = valid_rx_cnt; + + if (valid_rx_cnt < idle_rx_cnt) + idle_rx_cnt = valid_rx_cnt; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + il->staging.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam) + il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); +} + +static const char * +il4965_get_fh_string(int cmd) +{ + switch (cmd) { + IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG); + IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG); + IL_CMD(FH49_RSCSR_CHNL0_WPTR); + IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG); + IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG); + IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG); + IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); + IL_CMD(FH49_TSSR_TX_STATUS_REG); + IL_CMD(FH49_TSSR_TX_ERROR_REG); + default: + return "UNKNOWN"; + } +} + +int +il4965_dump_fh(struct il_priv *il, char **buf, bool display) +{ + int i; +#ifdef CONFIG_IWLEGACY_DEBUG + int pos = 0; + size_t bufsz = 0; +#endif + static const u32 fh_tbl[] = { + FH49_RSCSR_CHNL0_STTS_WPTR_REG, + FH49_RSCSR_CHNL0_RBDCB_BASE_REG, + FH49_RSCSR_CHNL0_WPTR, + FH49_MEM_RCSR_CHNL0_CONFIG_REG, + FH49_MEM_RSSR_SHARED_CTRL_REG, + FH49_MEM_RSSR_RX_STATUS_REG, + FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, + FH49_TSSR_TX_STATUS_REG, + FH49_TSSR_TX_ERROR_REG + }; +#ifdef CONFIG_IWLEGACY_DEBUG + if (display) { + bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); + if (!*buf) + return -ENOMEM; + pos += + scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + pos += + scnprintf(*buf + pos, bufsz - pos, + " %34s: 0X%08x\n", + il4965_get_fh_string(fh_tbl[i]), + il_rd(il, fh_tbl[i])); + } + return pos; + } +#endif + IL_ERR("FH register values:\n"); + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]), + il_rd(il, fh_tbl[i])); + } + return 0; +} + +static void +il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct il_missed_beacon_notif *missed_beacon; + + missed_beacon = &pkt->u.missed_beacon; + if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > + il->missed_beacon_threshold) { + D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", + le32_to_cpu(missed_beacon->consecutive_missed_beacons), + le32_to_cpu(missed_beacon->total_missed_becons), + le32_to_cpu(missed_beacon->num_recvd_beacons), + le32_to_cpu(missed_beacon->num_expected_beacons)); + if (!test_bit(S_SCANNING, &il->status)) + il4965_init_sensitivity(il); + } +} + +/* Calculate noise level, based on measurements during network silence just + * before arriving beacon. This measurement can be done only if we know + * exactly when to expect beacons, therefore only when we're associated. */ +static void +il4965_rx_calc_noise(struct il_priv *il) +{ + struct stats_rx_non_phy *rx_info; + int num_active_rx = 0; + int total_silence = 0; + int bcn_silence_a, bcn_silence_b, bcn_silence_c; + int last_rx_noise; + + rx_info = &(il->_4965.stats.rx.general); + bcn_silence_a = + le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; + bcn_silence_b = + le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; + bcn_silence_c = + le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; + + if (bcn_silence_a) { + total_silence += bcn_silence_a; + num_active_rx++; + } + if (bcn_silence_b) { + total_silence += bcn_silence_b; + num_active_rx++; + } + if (bcn_silence_c) { + total_silence += bcn_silence_c; + num_active_rx++; + } + + /* Average among active antennas */ + if (num_active_rx) + last_rx_noise = (total_silence / num_active_rx) - 107; + else + last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE; + + D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a, + bcn_silence_b, bcn_silence_c, last_rx_noise); +} + +#ifdef CONFIG_IWLEGACY_DEBUGFS +/* + * based on the assumption of all stats counter are in DWORD + * FIXME: This function is for debugging, do not deal with + * the case of counters roll-over. + */ +static void +il4965_accumulative_stats(struct il_priv *il, __le32 * stats) +{ + int i, size; + __le32 *prev_stats; + u32 *accum_stats; + u32 *delta, *max_delta; + struct stats_general_common *general, *accum_general; + + prev_stats = (__le32 *) &il->_4965.stats; + accum_stats = (u32 *) &il->_4965.accum_stats; + size = sizeof(struct il_notif_stats); + general = &il->_4965.stats.general.common; + accum_general = &il->_4965.accum_stats.general.common; + delta = (u32 *) &il->_4965.delta_stats; + max_delta = (u32 *) &il->_4965.max_delta; + + for (i = sizeof(__le32); i < size; + i += + sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, + accum_stats++) { + if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { + *delta = + (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); + *accum_stats += *delta; + if (*delta > *max_delta) + *max_delta = *delta; + } + } + + /* reset accumulative stats for "no-counter" type stats */ + accum_general->temperature = general->temperature; + accum_general->ttl_timestamp = general->ttl_timestamp; +} +#endif + +static void +il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) +{ + const int recalib_seconds = 60; + bool change; + struct il_rx_pkt *pkt = rxb_addr(rxb); + + D_RX("Statistics notification received (%d vs %d).\n", + (int)sizeof(struct il_notif_stats), + le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); + + change = + ((il->_4965.stats.general.common.temperature != + pkt->u.stats.general.common.temperature) || + ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) != + (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK))); +#ifdef CONFIG_IWLEGACY_DEBUGFS + il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats); +#endif + + /* TODO: reading some of stats is unneeded */ + memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats)); + + set_bit(S_STATS, &il->status); + + /* + * Reschedule the stats timer to occur in recalib_seconds to ensure + * we get a thermal update even if the uCode doesn't give us one + */ + mod_timer(&il->stats_periodic, + jiffies + msecs_to_jiffies(recalib_seconds * 1000)); + + if (unlikely(!test_bit(S_SCANNING, &il->status)) && + (pkt->hdr.cmd == N_STATS)) { + il4965_rx_calc_noise(il); + queue_work(il->workqueue, &il->run_time_calib_work); + } + + if (change) + il4965_temperature_calib(il); +} + +static void +il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + + if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) { +#ifdef CONFIG_IWLEGACY_DEBUGFS + memset(&il->_4965.accum_stats, 0, + sizeof(struct il_notif_stats)); + memset(&il->_4965.delta_stats, 0, + sizeof(struct il_notif_stats)); + memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats)); +#endif + D_RX("Statistics have been cleared\n"); + } + il4965_hdl_stats(il, rxb); +} + + +/* + * mac80211 queues, ACs, hardware queues, FIFOs. + * + * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues + * + * Mac80211 uses the following numbers, which we get as from it + * by way of skb_get_queue_mapping(skb): + * + * VO 0 + * VI 1 + * BE 2 + * BK 3 + * + * + * Regular (not A-MPDU) frames are put into hardware queues corresponding + * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their + * own queue per aggregation session (RA/TID combination), such queues are + * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In + * order to map frames to the right queue, we also need an AC->hw queue + * mapping. This is implemented here. + * + * Due to the way hw queues are set up (by the hw specific modules like + * 4965.c), the AC->hw queue mapping is the identity + * mapping. + */ + +static const u8 tid_to_ac[] = { + IEEE80211_AC_BE, + IEEE80211_AC_BK, + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_VO +}; + +static inline int +il4965_get_ac_from_tid(u16 tid) +{ + if (likely(tid < ARRAY_SIZE(tid_to_ac))) + return tid_to_ac[tid]; + + /* no support for TIDs 8-15 yet */ + return -EINVAL; +} + +static inline int +il4965_get_fifo_from_tid(u16 tid) +{ + static const u8 ac_to_fifo[] = { + IL_TX_FIFO_VO, + IL_TX_FIFO_VI, + IL_TX_FIFO_BE, + IL_TX_FIFO_BK, + }; + + if (likely(tid < ARRAY_SIZE(tid_to_ac))) + return ac_to_fifo[tid_to_ac[tid]]; + + /* no support for TIDs 8-15 yet */ + return -EINVAL; +} + +/* + * handle build C_TX command notification. + */ +static void +il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb, + struct il_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, + struct ieee80211_hdr *hdr, u8 std_id) +{ + __le16 fc = hdr->frame_control; + __le32 tx_flags = tx_cmd->tx_flags; + + tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { + tx_flags |= TX_CMD_FLG_ACK_MSK; + if (ieee80211_is_mgmt(fc)) + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + if (ieee80211_is_probe_resp(fc) && + !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) + tx_flags |= TX_CMD_FLG_TSF_MSK; + } else { + tx_flags &= (~TX_CMD_FLG_ACK_MSK); + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } + + if (ieee80211_is_back_req(fc)) + tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; + + tx_cmd->sta_id = std_id; + if (ieee80211_has_morefrags(fc)) + tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tx_cmd->tid_tspec = qc[0] & 0xf; + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; + } else { + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } + + il_tx_cmd_protection(il, info, fc, &tx_flags); + + tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); + if (ieee80211_is_mgmt(fc)) { + if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); + else + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); + } else { + tx_cmd->timeout.pm_frame_timeout = 0; + } + + tx_cmd->driver_txop = 0; + tx_cmd->tx_flags = tx_flags; + tx_cmd->next_frame_len = 0; +} + +static void +il4965_tx_cmd_build_rate(struct il_priv *il, + struct il_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + __le16 fc) +{ + const u8 rts_retry_limit = 60; + u32 rate_flags; + int rate_idx; + u8 data_retry_limit; + u8 rate_plcp; + + /* Set retry limit on DATA packets and Probe Responses */ + if (ieee80211_is_probe_resp(fc)) + data_retry_limit = 3; + else + data_retry_limit = IL4965_DEFAULT_TX_RETRY; + tx_cmd->data_retry_limit = data_retry_limit; + /* Set retry limit on RTS packets */ + tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); + + /* DATA packets will use the uCode station table for rate/antenna + * selection */ + if (ieee80211_is_data(fc)) { + tx_cmd->initial_rate_idx = 0; + tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; + return; + } + + /** + * If the current TX rate stored in mac80211 has the MCS bit set, it's + * not really a TX rate. Thus, we use the lowest supported rate for + * this band. Also use the lowest supported rate if the stored rate + * idx is invalid. + */ + rate_idx = info->control.rates[0].idx; + if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0 + || rate_idx > RATE_COUNT_LEGACY) + rate_idx = rate_lowest_index(&il->bands[info->band], sta); + /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ + if (info->band == NL80211_BAND_5GHZ) + rate_idx += IL_FIRST_OFDM_RATE; + /* Get PLCP rate for tx_cmd->rate_n_flags */ + rate_plcp = il_rates[rate_idx].plcp; + /* Zero out flags for this packet */ + rate_flags = 0; + + /* Set CCK flag as needed */ + if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + /* Set up antennas */ + il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); + rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; + + /* Set the rate in the TX cmd */ + tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags); +} + +static void +il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, + struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag, + int sta_id) +{ + struct ieee80211_key_conf *keyconf = info->control.hw_key; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + tx_cmd->sec_ctl = TX_CMD_SEC_CCM; + memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); + if (info->flags & IEEE80211_TX_CTL_AMPDU) + tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; + D_TX("tx_cmd with AES hwcrypto\n"); + break; + + case WLAN_CIPHER_SUITE_TKIP: + tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; + ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); + D_TX("tx_cmd with tkip hwcrypto\n"); + break; + + case WLAN_CIPHER_SUITE_WEP104: + tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; + /* fall through */ + case WLAN_CIPHER_SUITE_WEP40: + tx_cmd->sec_ctl |= + (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) << + TX_CMD_SEC_SHIFT); + + memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); + + D_TX("Configuring packet for WEP encryption " "with key %d\n", + keyconf->keyidx); + break; + + default: + IL_ERR("Unknown encode cipher %x\n", keyconf->cipher); + break; + } +} + +/* + * start C_TX command process + */ +int +il4965_tx_skb(struct il_priv *il, + struct ieee80211_sta *sta, + struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct il_station_priv *sta_priv = NULL; + struct il_tx_queue *txq; + struct il_queue *q; + struct il_device_cmd *out_cmd; + struct il_cmd_meta *out_meta; + struct il_tx_cmd *tx_cmd; + int txq_id; + dma_addr_t phys_addr; + dma_addr_t txcmd_phys; + dma_addr_t scratch_phys; + u16 len, firstlen, secondlen; + u16 seq_number = 0; + __le16 fc; + u8 hdr_len; + u8 sta_id; + u8 wait_write_ptr = 0; + u8 tid = 0; + u8 *qc = NULL; + unsigned long flags; + bool is_agg = false; + + spin_lock_irqsave(&il->lock, flags); + if (il_is_rfkill(il)) { + D_DROP("Dropping - RF KILL\n"); + goto drop_unlock; + } + + fc = hdr->frame_control; + +#ifdef CONFIG_IWLEGACY_DEBUG + if (ieee80211_is_auth(fc)) + D_TX("Sending AUTH frame\n"); + else if (ieee80211_is_assoc_req(fc)) + D_TX("Sending ASSOC frame\n"); + else if (ieee80211_is_reassoc_req(fc)) + D_TX("Sending REASSOC frame\n"); +#endif + + hdr_len = ieee80211_hdrlen(fc); + + /* For management frames use broadcast id to do not break aggregation */ + if (!ieee80211_is_data(fc)) + sta_id = il->hw_params.bcast_id; + else { + /* Find idx into station table for destination station */ + sta_id = il_sta_id_or_broadcast(il, sta); + + if (sta_id == IL_INVALID_STATION) { + D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); + goto drop_unlock; + } + } + + D_TX("station Id %d\n", sta_id); + + if (sta) + sta_priv = (void *)sta->drv_priv; + + if (sta_priv && sta_priv->asleep && + (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { + /* + * This sends an asynchronous command to the device, + * but we can rely on it being processed before the + * next frame is processed -- and the next frame to + * this station is the one that will consume this + * counter. + * For now set the counter to just 1 since we do not + * support uAPSD yet. + */ + il4965_sta_modify_sleep_tx_count(il, sta_id, 1); + } + + /* FIXME: remove me ? */ + WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM); + + /* Access category (AC) is also the queue number */ + txq_id = skb_get_queue_mapping(skb); + + /* irqs already disabled/saved above when locking il->lock */ + spin_lock(&il->sta_lock); + + if (ieee80211_is_data_qos(fc)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; + if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) { + spin_unlock(&il->sta_lock); + goto drop_unlock; + } + seq_number = il->stations[sta_id].tid[tid].seq_number; + seq_number &= IEEE80211_SCTL_SEQ; + hdr->seq_ctrl = + hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(seq_number); + seq_number += 0x10; + /* aggregation is on for this <sta,tid> */ + if (info->flags & IEEE80211_TX_CTL_AMPDU && + il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) { + txq_id = il->stations[sta_id].tid[tid].agg.txq_id; + is_agg = true; + } + } + + txq = &il->txq[txq_id]; + q = &txq->q; + + if (unlikely(il_queue_space(q) < q->high_mark)) { + spin_unlock(&il->sta_lock); + goto drop_unlock; + } + + if (ieee80211_is_data_qos(fc)) { + il->stations[sta_id].tid[tid].tfds_in_queue++; + if (!ieee80211_has_morefrags(fc)) + il->stations[sta_id].tid[tid].seq_number = seq_number; + } + + spin_unlock(&il->sta_lock); + + txq->skbs[q->write_ptr] = skb; + + /* Set up first empty entry in queue's array of Tx/cmd buffers */ + out_cmd = txq->cmd[q->write_ptr]; + out_meta = &txq->meta[q->write_ptr]; + tx_cmd = &out_cmd->cmd.tx; + memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); + memset(tx_cmd, 0, sizeof(struct il_tx_cmd)); + + /* + * Set up the Tx-command (not MAC!) header. + * Store the chosen Tx queue and TFD idx within the sequence field; + * after Tx, uCode's Tx response will return this value so driver can + * locate the frame within the tx queue and do post-tx processing. + */ + out_cmd->hdr.cmd = C_TX; + out_cmd->hdr.sequence = + cpu_to_le16((u16) + (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); + + /* Copy MAC header from skb into command buffer */ + memcpy(tx_cmd->hdr, hdr, hdr_len); + + /* Total # bytes to be transmitted */ + tx_cmd->len = cpu_to_le16((u16) skb->len); + + if (info->control.hw_key) + il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id); + + il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); + + /* + * Use the first empty entry in this queue's command buffer array + * to contain the Tx command and MAC header concatenated together + * (payload data will be in another buffer). + * Size of this varies, due to varying MAC header length. + * If end is not dword aligned, we'll have 2 extra bytes at the end + * of the MAC header (device reads on dword boundaries). + * We'll tell device about this padding later. + */ + len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len; + firstlen = (len + 3) & ~3; + + /* Tell NIC about any 2-byte padding after MAC header */ + if (firstlen != len) + tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; + + /* Physical address of this Tx command's header (not MAC header!), + * within command buffer array. */ + txcmd_phys = + pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, + PCI_DMA_BIDIRECTIONAL); + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; + + /* Set up TFD's 2nd entry to point directly to remainder of skb, + * if any (802.11 null frames have no payload). */ + secondlen = skb->len - hdr_len; + if (secondlen > 0) { + phys_addr = + pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, + PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, firstlen); + if (secondlen) + il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, + 0, 0); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } + + scratch_phys = + txcmd_phys + sizeof(struct il_cmd_header) + + offsetof(struct il_tx_cmd, scratch); + + /* take back ownership of DMA buffer to enable update */ + pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen, + PCI_DMA_BIDIRECTIONAL); + tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); + tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); + + il_update_stats(il, true, fc, skb->len); + + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); + D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); + il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); + il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len); + + /* Set up entry for this TFD in Tx byte-count array */ + if (info->flags & IEEE80211_TX_CTL_AMPDU) + il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len)); + + pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen, + PCI_DMA_BIDIRECTIONAL); + + /* Tell device the write idx *just past* this latest filled TFD */ + q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); + il_txq_update_write_ptr(il, txq); + spin_unlock_irqrestore(&il->lock, flags); + + /* + * At this point the frame is "transmitted" successfully + * and we will get a TX status notification eventually, + * regardless of the value of ret. "ret" only indicates + * whether or not we should update the write pointer. + */ + + /* + * Avoid atomic ops if it isn't an associated client. + * Also, if this is a packet for aggregation, don't + * increase the counter because the ucode will stop + * aggregation queues when their respective station + * goes to sleep. + */ + if (sta_priv && sta_priv->client && !is_agg) + atomic_inc(&sta_priv->pending_frames); + + if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { + if (wait_write_ptr) { + spin_lock_irqsave(&il->lock, flags); + txq->need_update = 1; + il_txq_update_write_ptr(il, txq); + spin_unlock_irqrestore(&il->lock, flags); + } else { + il_stop_queue(il, txq); + } + } + + return 0; + +drop_unlock: + spin_unlock_irqrestore(&il->lock, flags); + return -1; +} + +static inline int +il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size) +{ + ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma, + GFP_KERNEL); + if (!ptr->addr) + return -ENOMEM; + ptr->size = size; + return 0; +} + +static inline void +il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr) +{ + if (unlikely(!ptr->addr)) + return; + + dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma); + memset(ptr, 0, sizeof(*ptr)); +} + +/** + * il4965_hw_txq_ctx_free - Free TXQ Context + * + * Destroy all TX DMA queues and structures + */ +void +il4965_hw_txq_ctx_free(struct il_priv *il) +{ + int txq_id; + + /* Tx queues */ + if (il->txq) { + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) + if (txq_id == il->cmd_queue) + il_cmd_queue_free(il); + else + il_tx_queue_free(il, txq_id); + } + il4965_free_dma_ptr(il, &il->kw); + + il4965_free_dma_ptr(il, &il->scd_bc_tbls); + + /* free tx queue structure */ + il_free_txq_mem(il); +} + +/** + * il4965_txq_ctx_alloc - allocate TX queue context + * Allocate all Tx DMA structures and initialize them + * + * @param il + * @return error code + */ +int +il4965_txq_ctx_alloc(struct il_priv *il) +{ + int ret, txq_id; + unsigned long flags; + + /* Free all tx/cmd queues and keep-warm buffer */ + il4965_hw_txq_ctx_free(il); + + ret = + il4965_alloc_dma_ptr(il, &il->scd_bc_tbls, + il->hw_params.scd_bc_tbls_size); + if (ret) { + IL_ERR("Scheduler BC Table allocation failed\n"); + goto error_bc_tbls; + } + /* Alloc keep-warm buffer */ + ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE); + if (ret) { + IL_ERR("Keep Warm allocation failed\n"); + goto error_kw; + } + + /* allocate tx queue structure */ + ret = il_alloc_txq_mem(il); + if (ret) + goto error; + + spin_lock_irqsave(&il->lock, flags); + + /* Turn off all Tx DMA fifos */ + il4965_txq_set_sched(il, 0); + + /* Tell NIC where to find the "keep warm" buffer */ + il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); + + spin_unlock_irqrestore(&il->lock, flags); + + /* Alloc and init all Tx queues, including the command queue (#4/#9) */ + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { + ret = il_tx_queue_init(il, txq_id); + if (ret) { + IL_ERR("Tx %d queue init failed\n", txq_id); + goto error; + } + } + + return ret; + +error: + il4965_hw_txq_ctx_free(il); + il4965_free_dma_ptr(il, &il->kw); +error_kw: + il4965_free_dma_ptr(il, &il->scd_bc_tbls); +error_bc_tbls: + return ret; +} + +void +il4965_txq_ctx_reset(struct il_priv *il) +{ + int txq_id; + unsigned long flags; + + spin_lock_irqsave(&il->lock, flags); + + /* Turn off all Tx DMA fifos */ + il4965_txq_set_sched(il, 0); + /* Tell NIC where to find the "keep warm" buffer */ + il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); + + spin_unlock_irqrestore(&il->lock, flags); + + /* Alloc and init all Tx queues, including the command queue (#4) */ + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) + il_tx_queue_reset(il, txq_id); +} + +static void +il4965_txq_ctx_unmap(struct il_priv *il) +{ + int txq_id; + + if (!il->txq) + return; + + /* Unmap DMA from host system and free skb's */ + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) + if (txq_id == il->cmd_queue) + il_cmd_queue_unmap(il); + else + il_tx_queue_unmap(il, txq_id); +} + +/** + * il4965_txq_ctx_stop - Stop all Tx DMA channels + */ +void +il4965_txq_ctx_stop(struct il_priv *il) +{ + int ch, ret; + + _il_wr_prph(il, IL49_SCD_TXFACT, 0); + + /* Stop each Tx DMA channel, and wait for it to be idle */ + for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) { + _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); + ret = + _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG, + FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), + FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), + 1000); + if (ret < 0) + IL_ERR("Timeout stopping DMA channel %d [0x%08x]", + ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG)); + } +} + +/* + * Find first available (lowest unused) Tx Queue, mark it "active". + * Called only when finding queue for aggregation. + * Should never return anything < 7, because they should already + * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) + */ +static int +il4965_txq_ctx_activate_free(struct il_priv *il) +{ + int txq_id; + + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) + if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk)) + return txq_id; + return -1; +} + +/** + * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration + */ +static void +il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id) +{ + /* Simply stop the queue, but don't change any configuration; + * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ + il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), + (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | + (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); +} + +/** + * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue + */ +static int +il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id) +{ + u32 tbl_dw_addr; + u32 tbl_dw; + u16 scd_q2ratid; + + scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; + + tbl_dw_addr = + il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); + + tbl_dw = il_read_targ_mem(il, tbl_dw_addr); + + if (txq_id & 0x1) + tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); + else + tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); + + il_write_targ_mem(il, tbl_dw_addr, tbl_dw); + + return 0; +} + +/** + * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue + * + * NOTE: txq_id must be greater than IL49_FIRST_AMPDU_QUEUE, + * i.e. it must be one of the higher queues used for aggregation + */ +static int +il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id, + int tid, u16 ssn_idx) +{ + unsigned long flags; + u16 ra_tid; + int ret; + + if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || + (IL49_FIRST_AMPDU_QUEUE + + il->cfg->num_of_ampdu_queues <= txq_id)) { + IL_WARN("queue number out of range: %d, must be %d to %d\n", + txq_id, IL49_FIRST_AMPDU_QUEUE, + IL49_FIRST_AMPDU_QUEUE + + il->cfg->num_of_ampdu_queues - 1); + return -EINVAL; + } + + ra_tid = BUILD_RAxTID(sta_id, tid); + + /* Modify device's station table to Tx this TID */ + ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid); + if (ret) + return ret; + + spin_lock_irqsave(&il->lock, flags); + + /* Stop this Tx queue before configuring it */ + il4965_tx_queue_stop_scheduler(il, txq_id); + + /* Map receiver-address / traffic-ID to this queue */ + il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id); + + /* Set this queue as a chain-building queue */ + il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); + + /* Place first TFD at idx corresponding to start sequence number. + * Assumes that ssn_idx is valid (!= 0xFFF) */ + il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); + il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); + il4965_set_wr_ptrs(il, txq_id, ssn_idx); + + /* Set up Tx win size and frame limit for this queue */ + il_write_targ_mem(il, + il->scd_base_addr + + IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), + (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) + & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + + il_write_targ_mem(il, + il->scd_base_addr + + IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), + (SCD_FRAME_LIMIT << + IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + + il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); + + /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ + il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1); + + spin_unlock_irqrestore(&il->lock, flags); + + return 0; +} + +int +il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 * ssn) +{ + int sta_id; + int tx_fifo; + int txq_id; + int ret; + unsigned long flags; + struct il_tid_data *tid_data; + + /* FIXME: warning if tx fifo not found ? */ + tx_fifo = il4965_get_fifo_from_tid(tid); + if (unlikely(tx_fifo < 0)) + return tx_fifo; + + D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid); + + sta_id = il_sta_id(sta); + if (sta_id == IL_INVALID_STATION) { + IL_ERR("Start AGG on invalid station\n"); + return -ENXIO; + } + if (unlikely(tid >= MAX_TID_COUNT)) + return -EINVAL; + + if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) { + IL_ERR("Start AGG when state is not IL_AGG_OFF !\n"); + return -ENXIO; + } + + txq_id = il4965_txq_ctx_activate_free(il); + if (txq_id == -1) { + IL_ERR("No free aggregation queue available\n"); + return -ENXIO; + } + + spin_lock_irqsave(&il->sta_lock, flags); + tid_data = &il->stations[sta_id].tid[tid]; + *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); + tid_data->agg.txq_id = txq_id; + il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id); + spin_unlock_irqrestore(&il->sta_lock, flags); + + ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn); + if (ret) + return ret; + + spin_lock_irqsave(&il->sta_lock, flags); + tid_data = &il->stations[sta_id].tid[tid]; + if (tid_data->tfds_in_queue == 0) { + D_HT("HW queue is empty\n"); + tid_data->agg.state = IL_AGG_ON; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + } else { + D_HT("HW queue is NOT empty: %d packets in HW queue\n", + tid_data->tfds_in_queue); + tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA; + } + spin_unlock_irqrestore(&il->sta_lock, flags); + return ret; +} + +/** + * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE + * il->lock must be held by the caller + */ +static int +il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo) +{ + if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || + (IL49_FIRST_AMPDU_QUEUE + + il->cfg->num_of_ampdu_queues <= txq_id)) { + IL_WARN("queue number out of range: %d, must be %d to %d\n", + txq_id, IL49_FIRST_AMPDU_QUEUE, + IL49_FIRST_AMPDU_QUEUE + + il->cfg->num_of_ampdu_queues - 1); + return -EINVAL; + } + + il4965_tx_queue_stop_scheduler(il, txq_id); + + il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); + + il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); + il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); + /* supposes that ssn_idx is valid (!= 0xFFF) */ + il4965_set_wr_ptrs(il, txq_id, ssn_idx); + + il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); + il_txq_ctx_deactivate(il, txq_id); + il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0); + + return 0; +} + +int +il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid) +{ + int tx_fifo_id, txq_id, sta_id, ssn; + struct il_tid_data *tid_data; + int write_ptr, read_ptr; + unsigned long flags; + + /* FIXME: warning if tx_fifo_id not found ? */ + tx_fifo_id = il4965_get_fifo_from_tid(tid); + if (unlikely(tx_fifo_id < 0)) + return tx_fifo_id; + + sta_id = il_sta_id(sta); + + if (sta_id == IL_INVALID_STATION) { + IL_ERR("Invalid station for AGG tid %d\n", tid); + return -ENXIO; + } + + spin_lock_irqsave(&il->sta_lock, flags); + + tid_data = &il->stations[sta_id].tid[tid]; + ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; + txq_id = tid_data->agg.txq_id; + + switch (il->stations[sta_id].tid[tid].agg.state) { + case IL_EMPTYING_HW_QUEUE_ADDBA: + /* + * This can happen if the peer stops aggregation + * again before we've had a chance to drain the + * queue we selected previously, i.e. before the + * session was really started completely. + */ + D_HT("AGG stop before setup done\n"); + goto turn_off; + case IL_AGG_ON: + break; + default: + IL_WARN("Stopping AGG while state not ON or starting\n"); + } + + write_ptr = il->txq[txq_id].q.write_ptr; + read_ptr = il->txq[txq_id].q.read_ptr; + + /* The queue is not empty */ + if (write_ptr != read_ptr) { + D_HT("Stopping a non empty AGG HW QUEUE\n"); + il->stations[sta_id].tid[tid].agg.state = + IL_EMPTYING_HW_QUEUE_DELBA; + spin_unlock_irqrestore(&il->sta_lock, flags); + return 0; + } + + D_HT("HW queue is empty\n"); +turn_off: + il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF; + + /* do not restore/save irqs */ + spin_unlock(&il->sta_lock); + spin_lock(&il->lock); + + /* + * the only reason this call can fail is queue number out of range, + * which can happen if uCode is reloaded and all the station + * information are lost. if it is outside the range, there is no need + * to deactivate the uCode queue, just return "success" to allow + * mac80211 to clean up it own data. + */ + il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id); + spin_unlock_irqrestore(&il->lock, flags); + + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + + return 0; +} + +int +il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id) +{ + struct il_queue *q = &il->txq[txq_id].q; + u8 *addr = il->stations[sta_id].sta.sta.addr; + struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid]; + + lockdep_assert_held(&il->sta_lock); + + switch (il->stations[sta_id].tid[tid].agg.state) { + case IL_EMPTYING_HW_QUEUE_DELBA: + /* We are reclaiming the last packet of the */ + /* aggregated HW queue */ + if (txq_id == tid_data->agg.txq_id && + q->read_ptr == q->write_ptr) { + u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); + int tx_fifo = il4965_get_fifo_from_tid(tid); + D_HT("HW queue empty: continue DELBA flow\n"); + il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo); + tid_data->agg.state = IL_AGG_OFF; + ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid); + } + break; + case IL_EMPTYING_HW_QUEUE_ADDBA: + /* We are reclaiming the last packet of the queue */ + if (tid_data->tfds_in_queue == 0) { + D_HT("HW queue empty: continue ADDBA flow\n"); + tid_data->agg.state = IL_AGG_ON; + ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid); + } + break; + } + + return 0; +} + +static void +il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1) +{ + struct ieee80211_sta *sta; + struct il_station_priv *sta_priv; + + rcu_read_lock(); + sta = ieee80211_find_sta(il->vif, addr1); + if (sta) { + sta_priv = (void *)sta->drv_priv; + /* avoid atomic ops if this isn't a client */ + if (sta_priv->client && + atomic_dec_return(&sta_priv->pending_frames) == 0) + ieee80211_sta_block_awake(il->hw, sta, false); + } + rcu_read_unlock(); +} + +static void +il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + + if (!is_agg) + il4965_non_agg_tx_status(il, hdr->addr1); + + ieee80211_tx_status_irqsafe(il->hw, skb); +} + +int +il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) +{ + struct il_tx_queue *txq = &il->txq[txq_id]; + struct il_queue *q = &txq->q; + int nfreed = 0; + struct ieee80211_hdr *hdr; + struct sk_buff *skb; + + if (idx >= q->n_bd || il_queue_used(q, idx) == 0) { + IL_ERR("Read idx for DMA queue txq id (%d), idx %d, " + "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd, + q->write_ptr, q->read_ptr); + return 0; + } + + for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; + q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { + + skb = txq->skbs[txq->q.read_ptr]; + + if (WARN_ON_ONCE(skb == NULL)) + continue; + + hdr = (struct ieee80211_hdr *) skb->data; + if (ieee80211_is_data_qos(hdr->frame_control)) + nfreed++; + + il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE); + + txq->skbs[txq->q.read_ptr] = NULL; + il->ops->txq_free_tfd(il, txq); + } + return nfreed; +} + +/** + * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack + * + * Go through block-ack's bitmap of ACK'd frames, update driver's record of + * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. + */ +static int +il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg, + struct il_compressed_ba_resp *ba_resp) +{ + int i, sh, ack; + u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); + u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); + int successes = 0; + struct ieee80211_tx_info *info; + u64 bitmap, sent_bitmap; + + if (unlikely(!agg->wait_for_ba)) { + if (unlikely(ba_resp->bitmap)) + IL_ERR("Received BA when not expected\n"); + return -EINVAL; + } + + /* Mark that the expected block-ack response arrived */ + agg->wait_for_ba = 0; + D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); + + /* Calculate shift to align block-ack bits with our Tx win bits */ + sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4); + if (sh < 0) /* tbw something is wrong with indices */ + sh += 0x100; + + if (agg->frame_count > (64 - sh)) { + D_TX_REPLY("more frames than bitmap size"); + return -1; + } + + /* don't use 64-bit values for now */ + bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; + + /* check for success or failure according to the + * transmitted bitmap and block-ack bitmap */ + sent_bitmap = bitmap & agg->bitmap; + + /* For each frame attempted in aggregation, + * update driver's record of tx frame's status. */ + i = 0; + while (sent_bitmap) { + ack = sent_bitmap & 1ULL; + successes += ack; + D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK", + i, (agg->start_idx + i) & 0xff, agg->start_idx + i); + sent_bitmap >>= 1; + ++i; + } + + D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); + + info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]); + memset(&info->status, 0, sizeof(info->status)); + info->flags |= IEEE80211_TX_STAT_ACK; + info->flags |= IEEE80211_TX_STAT_AMPDU; + info->status.ampdu_ack_len = successes; + info->status.ampdu_len = agg->frame_count; + il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info); + + return 0; +} + +static inline bool +il4965_is_tx_success(u32 status) +{ + status &= TX_STATUS_MSK; + return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE); +} + +static u8 +il4965_find_station(struct il_priv *il, const u8 *addr) +{ + int i; + int start = 0; + int ret = IL_INVALID_STATION; + unsigned long flags; + + if (il->iw_mode == NL80211_IFTYPE_ADHOC) + start = IL_STA_ID; + + if (is_broadcast_ether_addr(addr)) + return il->hw_params.bcast_id; + + spin_lock_irqsave(&il->sta_lock, flags); + for (i = start; i < il->hw_params.max_stations; i++) + if (il->stations[i].used && + ether_addr_equal(il->stations[i].sta.sta.addr, addr)) { + ret = i; + goto out; + } + + D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations); + +out: + /* + * It may be possible that more commands interacting with stations + * arrive before we completed processing the adding of + * station + */ + if (ret != IL_INVALID_STATION && + (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) || + ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) && + (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) { + IL_ERR("Requested station info for sta %d before ready.\n", + ret); + ret = IL_INVALID_STATION; + } + spin_unlock_irqrestore(&il->sta_lock, flags); + return ret; +} + +static int +il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr) +{ + if (il->iw_mode == NL80211_IFTYPE_STATION) + return IL_AP_ID; + else { + u8 *da = ieee80211_get_DA(hdr); + + return il4965_find_station(il, da); + } +} + +static inline u32 +il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp) +{ + return le32_to_cpup(&tx_resp->u.status + + tx_resp->frame_count) & IEEE80211_MAX_SN; +} + +static inline u32 +il4965_tx_status_to_mac80211(u32 status) +{ + status &= TX_STATUS_MSK; + + switch (status) { + case TX_STATUS_SUCCESS: + case TX_STATUS_DIRECT_DONE: + return IEEE80211_TX_STAT_ACK; + case TX_STATUS_FAIL_DEST_PS: + return IEEE80211_TX_STAT_TX_FILTERED; + default: + return 0; + } +} + +/** + * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue + */ +static int +il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg, + struct il4965_tx_resp *tx_resp, int txq_id, + u16 start_idx) +{ + u16 status; + struct agg_tx_status *frame_status = tx_resp->u.agg_status; + struct ieee80211_tx_info *info = NULL; + struct ieee80211_hdr *hdr = NULL; + u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); + int i, sh, idx; + u16 seq; + if (agg->wait_for_ba) + D_TX_REPLY("got tx response w/o block-ack\n"); + + agg->frame_count = tx_resp->frame_count; + agg->start_idx = start_idx; + agg->rate_n_flags = rate_n_flags; + agg->bitmap = 0; + + /* num frames attempted by Tx command */ + if (agg->frame_count == 1) { + /* Only one frame was attempted; no block-ack will arrive */ + status = le16_to_cpu(frame_status[0].status); + idx = start_idx; + + D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", + agg->frame_count, agg->start_idx, idx); + + info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]); + info->status.rates[0].count = tx_resp->failure_frame + 1; + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + info->flags |= il4965_tx_status_to_mac80211(status); + il4965_hwrate_to_tx_control(il, rate_n_flags, info); + + D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff, + tx_resp->failure_frame); + D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); + + agg->wait_for_ba = 0; + } else { + /* Two or more frames were attempted; expect block-ack */ + u64 bitmap = 0; + int start = agg->start_idx; + struct sk_buff *skb; + + /* Construct bit-map of pending frames within Tx win */ + for (i = 0; i < agg->frame_count; i++) { + u16 sc; + status = le16_to_cpu(frame_status[i].status); + seq = le16_to_cpu(frame_status[i].sequence); + idx = SEQ_TO_IDX(seq); + txq_id = SEQ_TO_QUEUE(seq); + + if (status & + (AGG_TX_STATE_FEW_BYTES_MSK | + AGG_TX_STATE_ABORT_MSK)) + continue; + + D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", + agg->frame_count, txq_id, idx); + + skb = il->txq[txq_id].skbs[idx]; + if (WARN_ON_ONCE(skb == NULL)) + return -1; + hdr = (struct ieee80211_hdr *) skb->data; + + sc = le16_to_cpu(hdr->seq_ctrl); + if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) { + IL_ERR("BUG_ON idx doesn't match seq control" + " idx=%d, seq_idx=%d, seq=%d\n", idx, + IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl); + return -1; + } + + D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx, + IEEE80211_SEQ_TO_SN(sc)); + + sh = idx - start; + if (sh > 64) { + sh = (start - idx) + 0xff; + bitmap = bitmap << sh; + sh = 0; + start = idx; + } else if (sh < -64) + sh = 0xff - (start - idx); + else if (sh < 0) { + sh = start - idx; + start = idx; + bitmap = bitmap << sh; + sh = 0; + } + bitmap |= 1ULL << sh; + D_TX_REPLY("start=%d bitmap=0x%llx\n", start, + (unsigned long long)bitmap); + } + + agg->bitmap = bitmap; + agg->start_idx = start; + D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", + agg->frame_count, agg->start_idx, + (unsigned long long)agg->bitmap); + + if (bitmap) + agg->wait_for_ba = 1; + } + return 0; +} + +/** + * il4965_hdl_tx - Handle standard (non-aggregation) Tx response + */ +static void +il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int idx = SEQ_TO_IDX(sequence); + struct il_tx_queue *txq = &il->txq[txq_id]; + struct sk_buff *skb; + struct ieee80211_hdr *hdr; + struct ieee80211_tx_info *info; + struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; + u32 status = le32_to_cpu(tx_resp->u.status); + int uninitialized_var(tid); + int sta_id; + int freed; + u8 *qc = NULL; + unsigned long flags; + + if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { + IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " + "is out of range [0-%d] %d %d\n", txq_id, idx, + txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); + return; + } + + txq->time_stamp = jiffies; + + skb = txq->skbs[txq->q.read_ptr]; + info = IEEE80211_SKB_CB(skb); + memset(&info->status, 0, sizeof(info->status)); + + hdr = (struct ieee80211_hdr *) skb->data; + if (ieee80211_is_data_qos(hdr->frame_control)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } + + sta_id = il4965_get_ra_sta_id(il, hdr); + if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) { + IL_ERR("Station not known\n"); + return; + } + + /* + * Firmware will not transmit frame on passive channel, if it not yet + * received some valid frame on that channel. When this error happen + * we have to wait until firmware will unblock itself i.e. when we + * note received beacon or other frame. We unblock queues in + * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed. + */ + if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && + il->iw_mode == NL80211_IFTYPE_STATION) { + il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); + D_INFO("Stopped queues - RX waiting on passive channel\n"); + } + + spin_lock_irqsave(&il->sta_lock, flags); + if (txq->sched_retry) { + const u32 scd_ssn = il4965_get_scd_ssn(tx_resp); + struct il_ht_agg *agg = NULL; + WARN_ON(!qc); + + agg = &il->stations[sta_id].tid[tid].agg; + + il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx); + + /* check if BAR is needed */ + if (tx_resp->frame_count == 1 && + !il4965_is_tx_success(status)) + info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + + if (txq->q.read_ptr != (scd_ssn & 0xff)) { + idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); + D_TX_REPLY("Retry scheduler reclaim scd_ssn " + "%d idx %d\n", scd_ssn, idx); + freed = il4965_tx_queue_reclaim(il, txq_id, idx); + if (qc) + il4965_free_tfds_in_queue(il, sta_id, tid, + freed); + + if (il->mac80211_registered && + il_queue_space(&txq->q) > txq->q.low_mark && + agg->state != IL_EMPTYING_HW_QUEUE_DELBA) + il_wake_queue(il, txq); + } + } else { + info->status.rates[0].count = tx_resp->failure_frame + 1; + info->flags |= il4965_tx_status_to_mac80211(status); + il4965_hwrate_to_tx_control(il, + le32_to_cpu(tx_resp->rate_n_flags), + info); + + D_TX_REPLY("TXQ %d status %s (0x%08x) " + "rate_n_flags 0x%x retries %d\n", txq_id, + il4965_get_tx_fail_reason(status), status, + le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame); + + freed = il4965_tx_queue_reclaim(il, txq_id, idx); + if (qc && likely(sta_id != IL_INVALID_STATION)) + il4965_free_tfds_in_queue(il, sta_id, tid, freed); + else if (sta_id == IL_INVALID_STATION) + D_TX_REPLY("Station not known\n"); + + if (il->mac80211_registered && + il_queue_space(&txq->q) > txq->q.low_mark) + il_wake_queue(il, txq); + } + if (qc && likely(sta_id != IL_INVALID_STATION)) + il4965_txq_check_empty(il, sta_id, tid, txq_id); + + il4965_check_abort_status(il, tx_resp->frame_count, status); + + spin_unlock_irqrestore(&il->sta_lock, flags); +} + +/** + * translate ucode response to mac80211 tx status control values + */ +void +il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, + struct ieee80211_tx_info *info) +{ + struct ieee80211_tx_rate *r = &info->status.rates[0]; + + info->status.antenna = + ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); + if (rate_n_flags & RATE_MCS_HT_MSK) + r->flags |= IEEE80211_TX_RC_MCS; + if (rate_n_flags & RATE_MCS_GF_MSK) + r->flags |= IEEE80211_TX_RC_GREEN_FIELD; + if (rate_n_flags & RATE_MCS_HT40_MSK) + r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + if (rate_n_flags & RATE_MCS_DUP_MSK) + r->flags |= IEEE80211_TX_RC_DUP_DATA; + if (rate_n_flags & RATE_MCS_SGI_MSK) + r->flags |= IEEE80211_TX_RC_SHORT_GI; + r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band); +} + +/** + * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA + * + * Handles block-acknowledge notification from device, which reports success + * of frames sent via aggregation. + */ +static void +il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; + struct il_tx_queue *txq = NULL; + struct il_ht_agg *agg; + int idx; + int sta_id; + int tid; + unsigned long flags; + + /* "flow" corresponds to Tx queue */ + u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); + + /* "ssn" is start of block-ack Tx win, corresponds to idx + * (in Tx queue's circular buffer) of first TFD/frame in win */ + u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); + + if (scd_flow >= il->hw_params.max_txq_num) { + IL_ERR("BUG_ON scd_flow is bigger than number of queues\n"); + return; + } + + txq = &il->txq[scd_flow]; + sta_id = ba_resp->sta_id; + tid = ba_resp->tid; + agg = &il->stations[sta_id].tid[tid].agg; + if (unlikely(agg->txq_id != scd_flow)) { + /* + * FIXME: this is a uCode bug which need to be addressed, + * log the information and return for now! + * since it is possible happen very often and in order + * not to fill the syslog, don't enable the logging by default + */ + D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n", + scd_flow, agg->txq_id); + return; + } + + /* Find idx just before block-ack win */ + idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); + + spin_lock_irqsave(&il->sta_lock, flags); + + D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n", + agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32, + ba_resp->sta_id); + D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = " + "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl, + (unsigned long long)le64_to_cpu(ba_resp->bitmap), + ba_resp->scd_flow, ba_resp->scd_ssn); + D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx, + (unsigned long long)agg->bitmap); + + /* Update driver's record of ACK vs. not for each frame in win */ + il4965_tx_status_reply_compressed_ba(il, agg, ba_resp); + + /* Release all TFDs before the SSN, i.e. all TFDs in front of + * block-ack win (we assume that they've been successfully + * transmitted ... if not, it's too late anyway). */ + if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { + /* calculate mac80211 ampdu sw queue to wake */ + int freed = il4965_tx_queue_reclaim(il, scd_flow, idx); + il4965_free_tfds_in_queue(il, sta_id, tid, freed); + + if (il_queue_space(&txq->q) > txq->q.low_mark && + il->mac80211_registered && + agg->state != IL_EMPTYING_HW_QUEUE_DELBA) + il_wake_queue(il, txq); + + il4965_txq_check_empty(il, sta_id, tid, scd_flow); + } + + spin_unlock_irqrestore(&il->sta_lock, flags); +} + +#ifdef CONFIG_IWLEGACY_DEBUG +const char * +il4965_get_tx_fail_reason(u32 status) +{ +#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x +#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x + + switch (status & TX_STATUS_MSK) { + case TX_STATUS_SUCCESS: + return "SUCCESS"; + TX_STATUS_POSTPONE(DELAY); + TX_STATUS_POSTPONE(FEW_BYTES); + TX_STATUS_POSTPONE(QUIET_PERIOD); + TX_STATUS_POSTPONE(CALC_TTAK); + TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); + TX_STATUS_FAIL(SHORT_LIMIT); + TX_STATUS_FAIL(LONG_LIMIT); + TX_STATUS_FAIL(FIFO_UNDERRUN); + TX_STATUS_FAIL(DRAIN_FLOW); + TX_STATUS_FAIL(RFKILL_FLUSH); + TX_STATUS_FAIL(LIFE_EXPIRE); + TX_STATUS_FAIL(DEST_PS); + TX_STATUS_FAIL(HOST_ABORTED); + TX_STATUS_FAIL(BT_RETRY); + TX_STATUS_FAIL(STA_INVALID); + TX_STATUS_FAIL(FRAG_DROPPED); + TX_STATUS_FAIL(TID_DISABLE); + TX_STATUS_FAIL(FIFO_FLUSHED); + TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); + TX_STATUS_FAIL(PASSIVE_NO_RX); + TX_STATUS_FAIL(NO_BEACON_ON_RADAR); + } + + return "UNKNOWN"; + +#undef TX_STATUS_FAIL +#undef TX_STATUS_POSTPONE +} +#endif /* CONFIG_IWLEGACY_DEBUG */ + +static struct il_link_quality_cmd * +il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id) +{ + int i, r; + struct il_link_quality_cmd *link_cmd; + u32 rate_flags = 0; + __le32 rate_n_flags; + + link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL); + if (!link_cmd) { + IL_ERR("Unable to allocate memory for LQ cmd.\n"); + return NULL; + } + /* Set up the rate scaling to start at selected rate, fall back + * all the way down to 1M in IEEE order, and then spin on 1M */ + if (il->band == NL80211_BAND_5GHZ) + r = RATE_6M_IDX; + else + r = RATE_1M_IDX; + + if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + rate_flags |= + il4965_first_antenna(il->hw_params. + valid_tx_ant) << RATE_MCS_ANT_POS; + rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags); + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) + link_cmd->rs_table[i].rate_n_flags = rate_n_flags; + + link_cmd->general_params.single_stream_ant_msk = + il4965_first_antenna(il->hw_params.valid_tx_ant); + + link_cmd->general_params.dual_stream_ant_msk = + il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params. + valid_tx_ant); + if (!link_cmd->general_params.dual_stream_ant_msk) { + link_cmd->general_params.dual_stream_ant_msk = ANT_AB; + } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) { + link_cmd->general_params.dual_stream_ant_msk = + il->hw_params.valid_tx_ant; + } + + link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + link_cmd->agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); + + link_cmd->sta_id = sta_id; + + return link_cmd; +} + +/* + * il4965_add_bssid_station - Add the special IBSS BSSID station + * + * Function sleeps. + */ +int +il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r) +{ + int ret; + u8 sta_id; + struct il_link_quality_cmd *link_cmd; + unsigned long flags; + + if (sta_id_r) + *sta_id_r = IL_INVALID_STATION; + + ret = il_add_station_common(il, addr, 0, NULL, &sta_id); + if (ret) { + IL_ERR("Unable to add station %pM\n", addr); + return ret; + } + + if (sta_id_r) + *sta_id_r = sta_id; + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].used |= IL_STA_LOCAL; + spin_unlock_irqrestore(&il->sta_lock, flags); + + /* Set up default rate scaling table in device's station table */ + link_cmd = il4965_sta_alloc_lq(il, sta_id); + if (!link_cmd) { + IL_ERR("Unable to initialize rate scaling for station %pM.\n", + addr); + return -ENOMEM; + } + + ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true); + if (ret) + IL_ERR("Link quality command failed (%d)\n", ret); + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].lq = link_cmd; + spin_unlock_irqrestore(&il->sta_lock, flags); + + return 0; +} + +static int +il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty) +{ + int i; + u8 buff[sizeof(struct il_wep_cmd) + + sizeof(struct il_wep_key) * WEP_KEYS_MAX]; + struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff; + size_t cmd_size = sizeof(struct il_wep_cmd); + struct il_host_cmd cmd = { + .id = C_WEPKEY, + .data = wep_cmd, + .flags = CMD_SYNC, + }; + bool not_empty = false; + + might_sleep(); + + memset(wep_cmd, 0, + cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX)); + + for (i = 0; i < WEP_KEYS_MAX; i++) { + u8 key_size = il->_4965.wep_keys[i].key_size; + + wep_cmd->key[i].key_idx = i; + if (key_size) { + wep_cmd->key[i].key_offset = i; + not_empty = true; + } else + wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; + + wep_cmd->key[i].key_size = key_size; + memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size); + } + + wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; + wep_cmd->num_keys = WEP_KEYS_MAX; + + cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX; + cmd.len = cmd_size; + + if (not_empty || send_if_empty) + return il_send_cmd(il, &cmd); + else + return 0; +} + +int +il4965_restore_default_wep_keys(struct il_priv *il) +{ + lockdep_assert_held(&il->mutex); + + return il4965_static_wepkey_cmd(il, false); +} + +int +il4965_remove_default_wep_key(struct il_priv *il, + struct ieee80211_key_conf *keyconf) +{ + int ret; + int idx = keyconf->keyidx; + + lockdep_assert_held(&il->mutex); + + D_WEP("Removing default WEP key: idx=%d\n", idx); + + memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key)); + if (il_is_rfkill(il)) { + D_WEP("Not sending C_WEPKEY command due to RFKILL.\n"); + /* but keys in device are clear anyway so return success */ + return 0; + } + ret = il4965_static_wepkey_cmd(il, 1); + D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret); + + return ret; +} + +int +il4965_set_default_wep_key(struct il_priv *il, + struct ieee80211_key_conf *keyconf) +{ + int ret; + int len = keyconf->keylen; + int idx = keyconf->keyidx; + + lockdep_assert_held(&il->mutex); + + if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) { + D_WEP("Bad WEP key length %d\n", keyconf->keylen); + return -EINVAL; + } + + keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; + keyconf->hw_key_idx = HW_KEY_DEFAULT; + il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher; + + il->_4965.wep_keys[idx].key_size = len; + memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len); + + ret = il4965_static_wepkey_cmd(il, false); + + D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret); + return ret; +} + +static int +il4965_set_wep_dynamic_key_info(struct il_priv *il, + struct ieee80211_key_conf *keyconf, u8 sta_id) +{ + unsigned long flags; + __le16 key_flags = 0; + struct il_addsta_cmd sta_cmd; + + lockdep_assert_held(&il->mutex); + + keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; + + key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (keyconf->keylen == WEP_KEY_LEN_128) + key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; + + if (sta_id == il->hw_params.bcast_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + spin_lock_irqsave(&il->sta_lock, flags); + + il->stations[sta_id].keyinfo.cipher = keyconf->cipher; + il->stations[sta_id].keyinfo.keylen = keyconf->keylen; + il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx; + + memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); + + memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key, + keyconf->keylen); + + if ((il->stations[sta_id].sta.key. + key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) + il->stations[sta_id].sta.key.key_offset = + il_get_free_ucode_key_idx(il); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + + WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for a new key"); + + il->stations[sta_id].sta.key.key_flags = key_flags; + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + memcpy(&sta_cmd, &il->stations[sta_id].sta, + sizeof(struct il_addsta_cmd)); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return il_send_add_sta(il, &sta_cmd, CMD_SYNC); +} + +static int +il4965_set_ccmp_dynamic_key_info(struct il_priv *il, + struct ieee80211_key_conf *keyconf, u8 sta_id) +{ + unsigned long flags; + __le16 key_flags = 0; + struct il_addsta_cmd sta_cmd; + + lockdep_assert_held(&il->mutex); + + key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == il->hw_params.bcast_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].keyinfo.cipher = keyconf->cipher; + il->stations[sta_id].keyinfo.keylen = keyconf->keylen; + + memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); + + memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); + + if ((il->stations[sta_id].sta.key. + key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) + il->stations[sta_id].sta.key.key_offset = + il_get_free_ucode_key_idx(il); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + + WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for a new key"); + + il->stations[sta_id].sta.key.key_flags = key_flags; + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + memcpy(&sta_cmd, &il->stations[sta_id].sta, + sizeof(struct il_addsta_cmd)); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return il_send_add_sta(il, &sta_cmd, CMD_SYNC); +} + +static int +il4965_set_tkip_dynamic_key_info(struct il_priv *il, + struct ieee80211_key_conf *keyconf, u8 sta_id) +{ + unsigned long flags; + int ret = 0; + __le16 key_flags = 0; + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == il->hw_params.bcast_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + + spin_lock_irqsave(&il->sta_lock, flags); + + il->stations[sta_id].keyinfo.cipher = keyconf->cipher; + il->stations[sta_id].keyinfo.keylen = 16; + + if ((il->stations[sta_id].sta.key. + key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) + il->stations[sta_id].sta.key.key_offset = + il_get_free_ucode_key_idx(il); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + + WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for a new key"); + + il->stations[sta_id].sta.key.key_flags = key_flags; + + /* This copy is acutally not needed: we get the key with each TX */ + memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16); + + memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16); + + spin_unlock_irqrestore(&il->sta_lock, flags); + + return ret; +} + +void +il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) +{ + u8 sta_id; + unsigned long flags; + int i; + + if (il_scan_cancel(il)) { + /* cancel scan failed, just live w/ bad key and rely + briefly on SW decryption */ + return; + } + + sta_id = il_sta_id_or_broadcast(il, sta); + if (sta_id == IL_INVALID_STATION) + return; + + spin_lock_irqsave(&il->sta_lock, flags); + + il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; + + for (i = 0; i < 5; i++) + il->stations[sta_id].sta.key.tkip_rx_ttak[i] = + cpu_to_le16(phase1key[i]); + + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); + + spin_unlock_irqrestore(&il->sta_lock, flags); +} + +int +il4965_remove_dynamic_key(struct il_priv *il, + struct ieee80211_key_conf *keyconf, u8 sta_id) +{ + unsigned long flags; + u16 key_flags; + u8 keyidx; + struct il_addsta_cmd sta_cmd; + + lockdep_assert_held(&il->mutex); + + il->_4965.key_mapping_keys--; + + spin_lock_irqsave(&il->sta_lock, flags); + key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags); + keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; + + D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); + + if (keyconf->keyidx != keyidx) { + /* We need to remove a key with idx different that the one + * in the uCode. This means that the key we need to remove has + * been replaced by another one with different idx. + * Don't do anything and return ok + */ + spin_unlock_irqrestore(&il->sta_lock, flags); + return 0; + } + + if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) { + IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx, + key_flags); + spin_unlock_irqrestore(&il->sta_lock, flags); + return 0; + } + + if (!test_and_clear_bit + (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table)) + IL_ERR("idx %d not used in uCode key table.\n", + il->stations[sta_id].sta.key.key_offset); + memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); + memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); + il->stations[sta_id].sta.key.key_flags = + STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; + il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx; + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + if (il_is_rfkill(il)) { + D_WEP + ("Not sending C_ADD_STA command because RFKILL enabled.\n"); + spin_unlock_irqrestore(&il->sta_lock, flags); + return 0; + } + memcpy(&sta_cmd, &il->stations[sta_id].sta, + sizeof(struct il_addsta_cmd)); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return il_send_add_sta(il, &sta_cmd, CMD_SYNC); +} + +int +il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, + u8 sta_id) +{ + int ret; + + lockdep_assert_held(&il->mutex); + + il->_4965.key_mapping_keys++; + keyconf->hw_key_idx = HW_KEY_DYNAMIC; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + ret = + il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id); + break; + case WLAN_CIPHER_SUITE_TKIP: + ret = + il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id); + break; + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id); + break; + default: + IL_ERR("Unknown alg: %s cipher = %x\n", __func__, + keyconf->cipher); + ret = -EINVAL; + } + + D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n", + keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); + + return ret; +} + +/** + * il4965_alloc_bcast_station - add broadcast station into driver's station table. + * + * This adds the broadcast station into the driver's station table + * and marks it driver active, so that it will be restored to the + * device at the next best time. + */ +int +il4965_alloc_bcast_station(struct il_priv *il) +{ + struct il_link_quality_cmd *link_cmd; + unsigned long flags; + u8 sta_id; + + spin_lock_irqsave(&il->sta_lock, flags); + sta_id = il_prep_station(il, il_bcast_addr, false, NULL); + if (sta_id == IL_INVALID_STATION) { + IL_ERR("Unable to prepare broadcast station\n"); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return -EINVAL; + } + + il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; + il->stations[sta_id].used |= IL_STA_BCAST; + spin_unlock_irqrestore(&il->sta_lock, flags); + + link_cmd = il4965_sta_alloc_lq(il, sta_id); + if (!link_cmd) { + IL_ERR + ("Unable to initialize rate scaling for bcast station.\n"); + return -ENOMEM; + } + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].lq = link_cmd; + spin_unlock_irqrestore(&il->sta_lock, flags); + + return 0; +} + +/** + * il4965_update_bcast_station - update broadcast station's LQ command + * + * Only used by iwl4965. Placed here to have all bcast station management + * code together. + */ +static int +il4965_update_bcast_station(struct il_priv *il) +{ + unsigned long flags; + struct il_link_quality_cmd *link_cmd; + u8 sta_id = il->hw_params.bcast_id; + + link_cmd = il4965_sta_alloc_lq(il, sta_id); + if (!link_cmd) { + IL_ERR("Unable to initialize rate scaling for bcast sta.\n"); + return -ENOMEM; + } + + spin_lock_irqsave(&il->sta_lock, flags); + if (il->stations[sta_id].lq) + kfree(il->stations[sta_id].lq); + else + D_INFO("Bcast sta rate scaling has not been initialized.\n"); + il->stations[sta_id].lq = link_cmd; + spin_unlock_irqrestore(&il->sta_lock, flags); + + return 0; +} + +int +il4965_update_bcast_stations(struct il_priv *il) +{ + return il4965_update_bcast_station(il); +} + +/** + * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table + */ +int +il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid) +{ + unsigned long flags; + struct il_addsta_cmd sta_cmd; + + lockdep_assert_held(&il->mutex); + + /* Remove "disable" flag, to enable Tx for this TID */ + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; + il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &il->stations[sta_id].sta, + sizeof(struct il_addsta_cmd)); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return il_send_add_sta(il, &sta_cmd, CMD_SYNC); +} + +int +il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid, + u16 ssn) +{ + unsigned long flags; + int sta_id; + struct il_addsta_cmd sta_cmd; + + lockdep_assert_held(&il->mutex); + + sta_id = il_sta_id(sta); + if (sta_id == IL_INVALID_STATION) + return -ENXIO; + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].sta.station_flags_msk = 0; + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; + il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid; + il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &il->stations[sta_id].sta, + sizeof(struct il_addsta_cmd)); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return il_send_add_sta(il, &sta_cmd, CMD_SYNC); +} + +int +il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid) +{ + unsigned long flags; + int sta_id; + struct il_addsta_cmd sta_cmd; + + lockdep_assert_held(&il->mutex); + + sta_id = il_sta_id(sta); + if (sta_id == IL_INVALID_STATION) { + IL_ERR("Invalid station for AGG tid %d\n", tid); + return -ENXIO; + } + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].sta.station_flags_msk = 0; + il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; + il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid; + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &il->stations[sta_id].sta, + sizeof(struct il_addsta_cmd)); + spin_unlock_irqrestore(&il->sta_lock, flags); + + return il_send_add_sta(il, &sta_cmd, CMD_SYNC); +} + +void +il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt) +{ + unsigned long flags; + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK; + il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; + il->stations[sta_id].sta.sta.modify_mask = + STA_MODIFY_SLEEP_TX_COUNT_MSK; + il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt); + il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&il->sta_lock, flags); + +} + +void +il4965_update_chain_flags(struct il_priv *il) +{ + if (il->ops->set_rxon_chain) { + il->ops->set_rxon_chain(il); + if (il->active.rx_chain != il->staging.rx_chain) + il_commit_rxon(il); + } +} + +static void +il4965_clear_free_frames(struct il_priv *il) +{ + struct list_head *element; + + D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); + + while (!list_empty(&il->free_frames)) { + element = il->free_frames.next; + list_del(element); + kfree(list_entry(element, struct il_frame, list)); + il->frames_count--; + } + + if (il->frames_count) { + IL_WARN("%d frames still in use. Did we lose one?\n", + il->frames_count); + il->frames_count = 0; + } +} + +static struct il_frame * +il4965_get_free_frame(struct il_priv *il) +{ + struct il_frame *frame; + struct list_head *element; + if (list_empty(&il->free_frames)) { + frame = kzalloc(sizeof(*frame), GFP_KERNEL); + if (!frame) { + IL_ERR("Could not allocate frame!\n"); + return NULL; + } + + il->frames_count++; + return frame; + } + + element = il->free_frames.next; + list_del(element); + return list_entry(element, struct il_frame, list); +} + +static void +il4965_free_frame(struct il_priv *il, struct il_frame *frame) +{ + memset(frame, 0, sizeof(*frame)); + list_add(&frame->list, &il->free_frames); +} + +static u32 +il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, + int left) +{ + lockdep_assert_held(&il->mutex); + + if (!il->beacon_skb) + return 0; + + if (il->beacon_skb->len > left) + return 0; + + memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); + + return il->beacon_skb->len; +} + +/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ +static void +il4965_set_beacon_tim(struct il_priv *il, + struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon, + u32 frame_size) +{ + u16 tim_idx; + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; + + /* + * The idx is relative to frame start but we start looking at the + * variable-length part of the beacon. + */ + tim_idx = mgmt->u.beacon.variable - beacon; + + /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ + while ((tim_idx < (frame_size - 2)) && + (beacon[tim_idx] != WLAN_EID_TIM)) + tim_idx += beacon[tim_idx + 1] + 2; + + /* If TIM field was found, set variables */ + if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { + tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); + tx_beacon_cmd->tim_size = beacon[tim_idx + 1]; + } else + IL_WARN("Unable to find TIM Element in beacon\n"); +} + +static unsigned int +il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame) +{ + struct il_tx_beacon_cmd *tx_beacon_cmd; + u32 frame_size; + u32 rate_flags; + u32 rate; + /* + * We have to set up the TX command, the TX Beacon command, and the + * beacon contents. + */ + + lockdep_assert_held(&il->mutex); + + if (!il->beacon_enabled) { + IL_ERR("Trying to build beacon without beaconing enabled\n"); + return 0; + } + + /* Initialize memory */ + tx_beacon_cmd = &frame->u.beacon; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + /* Set up TX beacon contents */ + frame_size = + il4965_fill_beacon_frame(il, tx_beacon_cmd->frame, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) + return 0; + if (!frame_size) + return 0; + + /* Set up TX command fields */ + tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); + tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + tx_beacon_cmd->tx.tx_flags = + TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK | + TX_CMD_FLG_STA_RATE_MSK; + + /* Set up TX beacon command fields */ + il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame, + frame_size); + + /* Set up packet rate and flags */ + rate = il_get_lowest_plcp(il); + il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); + rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; + if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE)) + rate_flags |= RATE_MCS_CCK_MSK; + tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags); + + return sizeof(*tx_beacon_cmd) + frame_size; +} + +int +il4965_send_beacon_cmd(struct il_priv *il) +{ + struct il_frame *frame; + unsigned int frame_size; + int rc; + + frame = il4965_get_free_frame(il); + if (!frame) { + IL_ERR("Could not obtain free frame buffer for beacon " + "command.\n"); + return -ENOMEM; + } + + frame_size = il4965_hw_get_beacon_cmd(il, frame); + if (!frame_size) { + IL_ERR("Error configuring the beacon command\n"); + il4965_free_frame(il, frame); + return -EINVAL; + } + + rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); + + il4965_free_frame(il, frame); + + return rc; +} + +static inline dma_addr_t +il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx) +{ + struct il_tfd_tb *tb = &tfd->tbs[idx]; + + dma_addr_t addr = get_unaligned_le32(&tb->lo); + if (sizeof(dma_addr_t) > sizeof(u32)) + addr |= + ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << + 16; + + return addr; +} + +static inline u16 +il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx) +{ + struct il_tfd_tb *tb = &tfd->tbs[idx]; + + return le16_to_cpu(tb->hi_n_len) >> 4; +} + +static inline void +il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len) +{ + struct il_tfd_tb *tb = &tfd->tbs[idx]; + u16 hi_n_len = len << 4; + + put_unaligned_le32(addr, &tb->lo); + if (sizeof(dma_addr_t) > sizeof(u32)) + hi_n_len |= ((addr >> 16) >> 16) & 0xF; + + tb->hi_n_len = cpu_to_le16(hi_n_len); + + tfd->num_tbs = idx + 1; +} + +static inline u8 +il4965_tfd_get_num_tbs(struct il_tfd *tfd) +{ + return tfd->num_tbs & 0x1f; +} + +/** + * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] + * @il - driver ilate data + * @txq - tx queue + * + * Does NOT advance any TFD circular buffer read/write idxes + * Does NOT free the TFD itself (which is within circular buffer) + */ +void +il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) +{ + struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds; + struct il_tfd *tfd; + struct pci_dev *dev = il->pci_dev; + int idx = txq->q.read_ptr; + int i; + int num_tbs; + + tfd = &tfd_tmp[idx]; + + /* Sanity check on number of chunks */ + num_tbs = il4965_tfd_get_num_tbs(tfd); + + if (num_tbs >= IL_NUM_OF_TBS) { + IL_ERR("Too many chunks: %i\n", num_tbs); + /* @todo issue fatal error, it is quite serious situation */ + return; + } + + /* Unmap tx_cmd */ + if (num_tbs) + pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), + dma_unmap_len(&txq->meta[idx], len), + PCI_DMA_BIDIRECTIONAL); + + /* Unmap chunks, if any. */ + for (i = 1; i < num_tbs; i++) + pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i), + il4965_tfd_tb_get_len(tfd, i), + PCI_DMA_TODEVICE); + + /* free SKB */ + if (txq->skbs) { + struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; + + /* can be called from irqs-disabled context */ + if (skb) { + dev_kfree_skb_any(skb); + txq->skbs[txq->q.read_ptr] = NULL; + } + } +} + +int +il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, + dma_addr_t addr, u16 len, u8 reset, u8 pad) +{ + struct il_queue *q; + struct il_tfd *tfd, *tfd_tmp; + u32 num_tbs; + + q = &txq->q; + tfd_tmp = (struct il_tfd *)txq->tfds; + tfd = &tfd_tmp[q->write_ptr]; + + if (reset) + memset(tfd, 0, sizeof(*tfd)); + + num_tbs = il4965_tfd_get_num_tbs(tfd); + + /* Each TFD can point to a maximum 20 Tx buffers */ + if (num_tbs >= IL_NUM_OF_TBS) { + IL_ERR("Error can not send more than %d chunks\n", + IL_NUM_OF_TBS); + return -EINVAL; + } + + BUG_ON(addr & ~DMA_BIT_MASK(36)); + if (unlikely(addr & ~IL_TX_DMA_MASK)) + IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr); + + il4965_tfd_set_tb(tfd, num_tbs, addr, len); + + return 0; +} + +/* + * Tell nic where to find circular buffer of Tx Frame Descriptors for + * given Tx queue, and enable the DMA channel used for that queue. + * + * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA + * channels supported in hardware. + */ +int +il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) +{ + int txq_id = txq->q.id; + + /* Circular buffer (TFD queue in DRAM) physical base address */ + il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); + + return 0; +} + +/****************************************************************************** + * + * Generic RX handler implementations + * + ******************************************************************************/ +static void +il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct il_alive_resp *palive; + struct delayed_work *pwork; + + palive = &pkt->u.alive_frame; + + D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", + palive->is_valid, palive->ver_type, palive->ver_subtype); + + if (palive->ver_subtype == INITIALIZE_SUBTYPE) { + D_INFO("Initialization Alive received.\n"); + memcpy(&il->card_alive_init, &pkt->u.alive_frame, + sizeof(struct il_init_alive_resp)); + pwork = &il->init_alive_start; + } else { + D_INFO("Runtime Alive received.\n"); + memcpy(&il->card_alive, &pkt->u.alive_frame, + sizeof(struct il_alive_resp)); + pwork = &il->alive_start; + } + + /* We delay the ALIVE response by 5ms to + * give the HW RF Kill time to activate... */ + if (palive->is_valid == UCODE_VALID_OK) + queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); + else + IL_WARN("uCode did not respond OK.\n"); +} + +/** + * il4965_bg_stats_periodic - Timer callback to queue stats + * + * This callback is provided in order to send a stats request. + * + * This timer function is continually reset to execute within + * 60 seconds since the last N_STATS was received. We need to + * ensure we receive the stats in order to update the temperature + * used for calibrating the TXPOWER. + */ +static void +il4965_bg_stats_periodic(struct timer_list *t) +{ + struct il_priv *il = from_timer(il, t, stats_periodic); + + if (test_bit(S_EXIT_PENDING, &il->status)) + return; + + /* dont send host command if rf-kill is on */ + if (!il_is_ready_rf(il)) + return; + + il_send_stats_request(il, CMD_ASYNC, false); +} + +static void +il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct il4965_beacon_notif *beacon = + (struct il4965_beacon_notif *)pkt->u.raw; +#ifdef CONFIG_IWLEGACY_DEBUG + u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); + + D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n", + le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, + beacon->beacon_notify_hdr.failure_frame, + le32_to_cpu(beacon->ibss_mgr_status), + le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); +#endif + il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); +} + +static void +il4965_perform_ct_kill_task(struct il_priv *il) +{ + unsigned long flags; + + D_POWER("Stop all queues\n"); + + if (il->mac80211_registered) + ieee80211_stop_queues(il->hw); + + _il_wr(il, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + _il_rd(il, CSR_UCODE_DRV_GP1); + + spin_lock_irqsave(&il->reg_lock, flags); + if (likely(_il_grab_nic_access(il))) + _il_release_nic_access(il); + spin_unlock_irqrestore(&il->reg_lock, flags); +} + +/* Handle notification from uCode that card's power state is changing + * due to software, hardware, or critical temperature RFKILL */ +static void +il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); + unsigned long status = il->status; + + D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n", + (flags & HW_CARD_DISABLED) ? "Kill" : "On", + (flags & SW_CARD_DISABLED) ? "Kill" : "On", + (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached"); + + if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) { + + _il_wr(il, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + + if (!(flags & RXON_CARD_DISABLED)) { + _il_wr(il, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + il_wr(il, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + } + } + + if (flags & CT_CARD_DISABLED) + il4965_perform_ct_kill_task(il); + + if (flags & HW_CARD_DISABLED) + set_bit(S_RFKILL, &il->status); + else + clear_bit(S_RFKILL, &il->status); + + if (!(flags & RXON_CARD_DISABLED)) + il_scan_cancel(il); + + if ((test_bit(S_RFKILL, &status) != + test_bit(S_RFKILL, &il->status))) + wiphy_rfkill_set_hw_state(il->hw->wiphy, + test_bit(S_RFKILL, &il->status)); + else + wake_up(&il->wait_command_queue); +} + +/** + * il4965_setup_handlers - Initialize Rx handler callbacks + * + * Setup the RX handlers for each of the reply types sent from the uCode + * to the host. + * + * This function chains into the hardware specific files for them to setup + * any hardware specific handlers as well. + */ +static void +il4965_setup_handlers(struct il_priv *il) +{ + il->handlers[N_ALIVE] = il4965_hdl_alive; + il->handlers[N_ERROR] = il_hdl_error; + il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; + il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; + il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; + il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; + il->handlers[N_BEACON] = il4965_hdl_beacon; + + /* + * The same handler is used for both the REPLY to a discrete + * stats request from the host as well as for the periodic + * stats notifications (after received beacons) from the uCode. + */ + il->handlers[C_STATS] = il4965_hdl_c_stats; + il->handlers[N_STATS] = il4965_hdl_stats; + + il_setup_rx_scan_handlers(il); + + /* status change handler */ + il->handlers[N_CARD_STATE] = il4965_hdl_card_state; + + il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon; + /* Rx handlers */ + il->handlers[N_RX_PHY] = il4965_hdl_rx_phy; + il->handlers[N_RX_MPDU] = il4965_hdl_rx; + il->handlers[N_RX] = il4965_hdl_rx; + /* block ack */ + il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba; + /* Tx response */ + il->handlers[C_TX] = il4965_hdl_tx; +} + +/** + * il4965_rx_handle - Main entry function for receiving responses from uCode + * + * Uses the il->handlers callback function array to invoke + * the appropriate handlers, including command responses, + * frame-received notifications, and other notifications. + */ +void +il4965_rx_handle(struct il_priv *il) +{ + struct il_rx_buf *rxb; + struct il_rx_pkt *pkt; + struct il_rx_queue *rxq = &il->rxq; + u32 r, i; + int reclaim; + unsigned long flags; + u8 fill_rx = 0; + u32 count = 8; + int total_empty; + + /* uCode's read idx (stored in shared DRAM) indicates the last Rx + * buffer that the driver may process (last buffer filled by ucode). */ + r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; + i = rxq->read; + + /* Rx interrupt, but nothing sent from uCode */ + if (i == r) + D_RX("r = %d, i = %d\n", r, i); + + /* calculate total frames need to be restock after handling RX */ + total_empty = r - rxq->write_actual; + if (total_empty < 0) + total_empty += RX_QUEUE_SIZE; + + if (total_empty > (RX_QUEUE_SIZE / 2)) + fill_rx = 1; + + while (i != r) { + int len; + + rxb = rxq->queue[i]; + + /* If an RXB doesn't have a Rx queue slot associated with it, + * then a bug has been introduced in the queue refilling + * routines -- catch it here */ + BUG_ON(rxb == NULL); + + rxq->queue[i] = NULL; + + pci_unmap_page(il->pci_dev, rxb->page_dma, + PAGE_SIZE << il->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + pkt = rxb_addr(rxb); + + len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; + len += sizeof(u32); /* account for status word */ + + reclaim = il_need_reclaim(il, pkt); + + /* Based on type of command response or notification, + * handle those that need handling via function in + * handlers table. See il4965_setup_handlers() */ + if (il->handlers[pkt->hdr.cmd]) { + D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, + il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); + il->isr_stats.handlers[pkt->hdr.cmd]++; + il->handlers[pkt->hdr.cmd] (il, rxb); + } else { + /* No handling needed */ + D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, + i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); + } + + /* + * XXX: After here, we should always check rxb->page + * against NULL before touching it or its virtual + * memory (pkt). Because some handler might have + * already taken or freed the pages. + */ + + if (reclaim) { + /* Invoke any callbacks, transfer the buffer to caller, + * and fire off the (possibly) blocking il_send_cmd() + * as we reclaim the driver command queue */ + if (rxb->page) + il_tx_cmd_complete(il, rxb); + else + IL_WARN("Claim null rxb?\n"); + } + + /* Reuse the page if possible. For notification packets and + * SKBs that fail to Rx correctly, add them back into the + * rx_free list for reuse later. */ + spin_lock_irqsave(&rxq->lock, flags); + if (rxb->page != NULL) { + rxb->page_dma = + pci_map_page(il->pci_dev, rxb->page, 0, + PAGE_SIZE << il->hw_params. + rx_page_order, PCI_DMA_FROMDEVICE); + + if (unlikely(pci_dma_mapping_error(il->pci_dev, + rxb->page_dma))) { + __il_free_pages(il, rxb->page); + rxb->page = NULL; + list_add_tail(&rxb->list, &rxq->rx_used); + } else { + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } + } else + list_add_tail(&rxb->list, &rxq->rx_used); + + spin_unlock_irqrestore(&rxq->lock, flags); + + i = (i + 1) & RX_QUEUE_MASK; + /* If there are a lot of unused frames, + * restock the Rx queue so ucode wont assert. */ + if (fill_rx) { + count++; + if (count >= 8) { + rxq->read = i; + il4965_rx_replenish_now(il); + count = 0; + } + } + } + + /* Backtrack one entry */ + rxq->read = i; + if (fill_rx) + il4965_rx_replenish_now(il); + else + il4965_rx_queue_restock(il); +} + +/* call this function to flush any scheduled tasklet */ +static inline void +il4965_synchronize_irq(struct il_priv *il) +{ + /* wait to make sure we flush pending tasklet */ + synchronize_irq(il->pci_dev->irq); + tasklet_kill(&il->irq_tasklet); +} + +static void +il4965_irq_tasklet(unsigned long data) +{ + struct il_priv *il = (struct il_priv *)data; + u32 inta, handled = 0; + u32 inta_fh; + unsigned long flags; + u32 i; +#ifdef CONFIG_IWLEGACY_DEBUG + u32 inta_mask; +#endif + + spin_lock_irqsave(&il->lock, flags); + + /* Ack/clear/reset pending uCode interrupts. + * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, + * and will clear only when CSR_FH_INT_STATUS gets cleared. */ + inta = _il_rd(il, CSR_INT); + _il_wr(il, CSR_INT, inta); + + /* Ack/clear/reset pending flow-handler (DMA) interrupts. + * Any new interrupts that happen after this, either while we're + * in this tasklet, or later, will show up in next ISR/tasklet. */ + inta_fh = _il_rd(il, CSR_FH_INT_STATUS); + _il_wr(il, CSR_FH_INT_STATUS, inta_fh); + +#ifdef CONFIG_IWLEGACY_DEBUG + if (il_get_debug_level(il) & IL_DL_ISR) { + /* just for debug */ + inta_mask = _il_rd(il, CSR_INT_MASK); + D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, + inta_mask, inta_fh); + } +#endif + + spin_unlock_irqrestore(&il->lock, flags); + + /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not + * atomic, make sure that inta covers all the interrupts that + * we've discovered, even if FH interrupt came in just after + * reading CSR_INT. */ + if (inta_fh & CSR49_FH_INT_RX_MASK) + inta |= CSR_INT_BIT_FH_RX; + if (inta_fh & CSR49_FH_INT_TX_MASK) + inta |= CSR_INT_BIT_FH_TX; + + /* Now service all interrupt bits discovered above. */ + if (inta & CSR_INT_BIT_HW_ERR) { + IL_ERR("Hardware error detected. Restarting.\n"); + + /* Tell the device to stop sending interrupts */ + il_disable_interrupts(il); + + il->isr_stats.hw++; + il_irq_handle_error(il); + + handled |= CSR_INT_BIT_HW_ERR; + + return; + } +#ifdef CONFIG_IWLEGACY_DEBUG + if (il_get_debug_level(il) & (IL_DL_ISR)) { + /* NIC fires this, but we don't use it, redundant with WAKEUP */ + if (inta & CSR_INT_BIT_SCD) { + D_ISR("Scheduler finished to transmit " + "the frame/frames.\n"); + il->isr_stats.sch++; + } + + /* Alive notification via Rx interrupt will do the real work */ + if (inta & CSR_INT_BIT_ALIVE) { + D_ISR("Alive interrupt\n"); + il->isr_stats.alive++; + } + } +#endif + /* Safely ignore these bits for debug checks below */ + inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); + + /* HW RF KILL switch toggled */ + if (inta & CSR_INT_BIT_RF_KILL) { + int hw_rf_kill = 0; + + if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) + hw_rf_kill = 1; + + IL_WARN("RF_KILL bit toggled to %s.\n", + hw_rf_kill ? "disable radio" : "enable radio"); + + il->isr_stats.rfkill++; + + /* driver only loads ucode once setting the interface up. + * the driver allows loading the ucode even if the radio + * is killed. Hence update the killswitch state here. The + * rfkill handler will care about restarting if needed. + */ + if (hw_rf_kill) { + set_bit(S_RFKILL, &il->status); + } else { + clear_bit(S_RFKILL, &il->status); + il_force_reset(il, true); + } + wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); + + handled |= CSR_INT_BIT_RF_KILL; + } + + /* Chip got too hot and stopped itself */ + if (inta & CSR_INT_BIT_CT_KILL) { + IL_ERR("Microcode CT kill error detected.\n"); + il->isr_stats.ctkill++; + handled |= CSR_INT_BIT_CT_KILL; + } + + /* Error detected by uCode */ + if (inta & CSR_INT_BIT_SW_ERR) { + IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n", + inta); + il->isr_stats.sw++; + il_irq_handle_error(il); + handled |= CSR_INT_BIT_SW_ERR; + } + + /* + * uCode wakes up after power-down sleep. + * Tell device about any new tx or host commands enqueued, + * and about any Rx buffers made available while asleep. + */ + if (inta & CSR_INT_BIT_WAKEUP) { + D_ISR("Wakeup interrupt\n"); + il_rx_queue_update_write_ptr(il, &il->rxq); + for (i = 0; i < il->hw_params.max_txq_num; i++) + il_txq_update_write_ptr(il, &il->txq[i]); + il->isr_stats.wakeup++; + handled |= CSR_INT_BIT_WAKEUP; + } + + /* All uCode command responses, including Tx command responses, + * Rx "responses" (frame-received notification), and other + * notifications from uCode come through here*/ + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { + il4965_rx_handle(il); + il->isr_stats.rx++; + handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); + } + + /* This "Tx" DMA channel is used only for loading uCode */ + if (inta & CSR_INT_BIT_FH_TX) { + D_ISR("uCode load interrupt\n"); + il->isr_stats.tx++; + handled |= CSR_INT_BIT_FH_TX; + /* Wake up uCode load routine, now that load is complete */ + il->ucode_write_complete = 1; + wake_up(&il->wait_command_queue); + } + + if (inta & ~handled) { + IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); + il->isr_stats.unhandled++; + } + + if (inta & ~(il->inta_mask)) { + IL_WARN("Disabled INTA bits 0x%08x were pending\n", + inta & ~il->inta_mask); + IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh); + } + + /* Re-enable all interrupts */ + /* only Re-enable if disabled by irq */ + if (test_bit(S_INT_ENABLED, &il->status)) + il_enable_interrupts(il); + /* Re-enable RF_KILL if it occurred */ + else if (handled & CSR_INT_BIT_RF_KILL) + il_enable_rfkill_int(il); + +#ifdef CONFIG_IWLEGACY_DEBUG + if (il_get_debug_level(il) & (IL_DL_ISR)) { + inta = _il_rd(il, CSR_INT); + inta_mask = _il_rd(il, CSR_INT_MASK); + inta_fh = _il_rd(il, CSR_FH_INT_STATUS); + D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " + "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); + } +#endif +} + +/***************************************************************************** + * + * sysfs attributes + * + *****************************************************************************/ + +#ifdef CONFIG_IWLEGACY_DEBUG + +/* + * The following adds a new attribute to the sysfs representation + * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) + * used for controlling the debug level. + * + * See the level definitions in iwl for details. + * + * The debug_level being managed using sysfs below is a per device debug + * level that is used instead of the global debug level if it (the per + * device debug level) is set. + */ +static ssize_t +il4965_show_debug_level(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct il_priv *il = dev_get_drvdata(d); + return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); +} + +static ssize_t +il4965_store_debug_level(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct il_priv *il = dev_get_drvdata(d); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 0, &val); + if (ret) + IL_ERR("%s is not in hex or decimal form.\n", buf); + else + il->debug_level = val; + + return strnlen(buf, count); +} + +static DEVICE_ATTR(debug_level, 0644, il4965_show_debug_level, + il4965_store_debug_level); + +#endif /* CONFIG_IWLEGACY_DEBUG */ + +static ssize_t +il4965_show_temperature(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct il_priv *il = dev_get_drvdata(d); + + if (!il_is_alive(il)) + return -EAGAIN; + + return sprintf(buf, "%d\n", il->temperature); +} + +static DEVICE_ATTR(temperature, 0444, il4965_show_temperature, NULL); + +static ssize_t +il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) +{ + struct il_priv *il = dev_get_drvdata(d); + + if (!il_is_ready_rf(il)) + return sprintf(buf, "off\n"); + else + return sprintf(buf, "%d\n", il->tx_power_user_lmt); +} + +static ssize_t +il4965_store_tx_power(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct il_priv *il = dev_get_drvdata(d); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + IL_INFO("%s is not in decimal form.\n", buf); + else { + ret = il_set_tx_power(il, val, false); + if (ret) + IL_ERR("failed setting tx power (0x%08x).\n", ret); + else + ret = count; + } + return ret; +} + +static DEVICE_ATTR(tx_power, 0644, il4965_show_tx_power, + il4965_store_tx_power); + +static struct attribute *il_sysfs_entries[] = { + &dev_attr_temperature.attr, + &dev_attr_tx_power.attr, +#ifdef CONFIG_IWLEGACY_DEBUG + &dev_attr_debug_level.attr, +#endif + NULL +}; + +static const struct attribute_group il_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = il_sysfs_entries, +}; + +/****************************************************************************** + * + * uCode download functions + * + ******************************************************************************/ + +static void +il4965_dealloc_ucode_pci(struct il_priv *il) +{ + il_free_fw_desc(il->pci_dev, &il->ucode_code); + il_free_fw_desc(il->pci_dev, &il->ucode_data); + il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); + il_free_fw_desc(il->pci_dev, &il->ucode_init); + il_free_fw_desc(il->pci_dev, &il->ucode_init_data); + il_free_fw_desc(il->pci_dev, &il->ucode_boot); +} + +static void +il4965_nic_start(struct il_priv *il) +{ + /* Remove all resets to allow NIC to operate */ + _il_wr(il, CSR_RESET, 0); +} + +static void il4965_ucode_callback(const struct firmware *ucode_raw, + void *context); +static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length); + +static int __must_check +il4965_request_firmware(struct il_priv *il, bool first) +{ + const char *name_pre = il->cfg->fw_name_pre; + char tag[8]; + + if (first) { + il->fw_idx = il->cfg->ucode_api_max; + sprintf(tag, "%d", il->fw_idx); + } else { + il->fw_idx--; + sprintf(tag, "%d", il->fw_idx); + } + + if (il->fw_idx < il->cfg->ucode_api_min) { + IL_ERR("no suitable firmware found!\n"); + return -ENOENT; + } + + sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); + + D_INFO("attempting to load firmware '%s'\n", il->firmware_name); + + return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name, + &il->pci_dev->dev, GFP_KERNEL, il, + il4965_ucode_callback); +} + +struct il4965_firmware_pieces { + const void *inst, *data, *init, *init_data, *boot; + size_t inst_size, data_size, init_size, init_data_size, boot_size; +}; + +static int +il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw, + struct il4965_firmware_pieces *pieces) +{ + struct il_ucode_header *ucode = (void *)ucode_raw->data; + u32 api_ver, hdr_size; + const u8 *src; + + il->ucode_ver = le32_to_cpu(ucode->ver); + api_ver = IL_UCODE_API(il->ucode_ver); + + switch (api_ver) { + default: + case 0: + case 1: + case 2: + hdr_size = 24; + if (ucode_raw->size < hdr_size) { + IL_ERR("File size too small!\n"); + return -EINVAL; + } + pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); + pieces->data_size = le32_to_cpu(ucode->v1.data_size); + pieces->init_size = le32_to_cpu(ucode->v1.init_size); + pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size); + pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); + src = ucode->v1.data; + break; + } + + /* Verify size of file vs. image size info in file's header */ + if (ucode_raw->size != + hdr_size + pieces->inst_size + pieces->data_size + + pieces->init_size + pieces->init_data_size + pieces->boot_size) { + + IL_ERR("uCode file size %d does not match expected size\n", + (int)ucode_raw->size); + return -EINVAL; + } + + pieces->inst = src; + src += pieces->inst_size; + pieces->data = src; + src += pieces->data_size; + pieces->init = src; + src += pieces->init_size; + pieces->init_data = src; + src += pieces->init_data_size; + pieces->boot = src; + src += pieces->boot_size; + + return 0; +} + +/** + * il4965_ucode_callback - callback when firmware was loaded + * + * If loaded successfully, copies the firmware into buffers + * for the card to fetch (via DMA). + */ +static void +il4965_ucode_callback(const struct firmware *ucode_raw, void *context) +{ + struct il_priv *il = context; + int err; + struct il4965_firmware_pieces pieces; + const unsigned int api_max = il->cfg->ucode_api_max; + const unsigned int api_min = il->cfg->ucode_api_min; + u32 api_ver; + + u32 max_probe_length = 200; + u32 standard_phy_calibration_size = + IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; + + memset(&pieces, 0, sizeof(pieces)); + + if (!ucode_raw) { + if (il->fw_idx <= il->cfg->ucode_api_max) + IL_ERR("request for firmware file '%s' failed.\n", + il->firmware_name); + goto try_again; + } + + D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name, + ucode_raw->size); + + /* Make sure that we got at least the API version number */ + if (ucode_raw->size < 4) { + IL_ERR("File size way too small!\n"); + goto try_again; + } + + /* Data from ucode file: header followed by uCode images */ + err = il4965_load_firmware(il, ucode_raw, &pieces); + + if (err) + goto try_again; + + api_ver = IL_UCODE_API(il->ucode_ver); + + /* + * api_ver should match the api version forming part of the + * firmware filename ... but we don't check for that and only rely + * on the API version read from firmware header from here on forward + */ + if (api_ver < api_min || api_ver > api_max) { + IL_ERR("Driver unable to support your firmware API. " + "Driver supports v%u, firmware is v%u.\n", api_max, + api_ver); + goto try_again; + } + + if (api_ver != api_max) + IL_ERR("Firmware has old API version. Expected v%u, " + "got v%u. New firmware can be obtained " + "from http://www.intellinuxwireless.org.\n", api_max, + api_ver); + + IL_INFO("loaded firmware version %u.%u.%u.%u\n", + IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), + IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); + + snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), + "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), + IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), + IL_UCODE_SERIAL(il->ucode_ver)); + + /* + * For any of the failures below (before allocating pci memory) + * we will try to load a version with a smaller API -- maybe the + * user just got a corrupted version of the latest API. + */ + + D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); + D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size); + D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size); + D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size); + D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size); + D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size); + + /* Verify that uCode images will fit in card's SRAM */ + if (pieces.inst_size > il->hw_params.max_inst_size) { + IL_ERR("uCode instr len %zd too large to fit in\n", + pieces.inst_size); + goto try_again; + } + + if (pieces.data_size > il->hw_params.max_data_size) { + IL_ERR("uCode data len %zd too large to fit in\n", + pieces.data_size); + goto try_again; + } + + if (pieces.init_size > il->hw_params.max_inst_size) { + IL_ERR("uCode init instr len %zd too large to fit in\n", + pieces.init_size); + goto try_again; + } + + if (pieces.init_data_size > il->hw_params.max_data_size) { + IL_ERR("uCode init data len %zd too large to fit in\n", + pieces.init_data_size); + goto try_again; + } + + if (pieces.boot_size > il->hw_params.max_bsm_size) { + IL_ERR("uCode boot instr len %zd too large to fit in\n", + pieces.boot_size); + goto try_again; + } + + /* Allocate ucode buffers for card's bus-master loading ... */ + + /* Runtime instructions and 2 copies of data: + * 1) unmodified from disk + * 2) backup cache for save/restore during power-downs */ + il->ucode_code.len = pieces.inst_size; + il_alloc_fw_desc(il->pci_dev, &il->ucode_code); + + il->ucode_data.len = pieces.data_size; + il_alloc_fw_desc(il->pci_dev, &il->ucode_data); + + il->ucode_data_backup.len = pieces.data_size; + il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); + + if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || + !il->ucode_data_backup.v_addr) + goto err_pci_alloc; + + /* Initialization instructions and data */ + if (pieces.init_size && pieces.init_data_size) { + il->ucode_init.len = pieces.init_size; + il_alloc_fw_desc(il->pci_dev, &il->ucode_init); + + il->ucode_init_data.len = pieces.init_data_size; + il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); + + if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) + goto err_pci_alloc; + } + + /* Bootstrap (instructions only, no data) */ + if (pieces.boot_size) { + il->ucode_boot.len = pieces.boot_size; + il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); + + if (!il->ucode_boot.v_addr) + goto err_pci_alloc; + } + + /* Now that we can no longer fail, copy information */ + + il->sta_key_max_num = STA_KEY_MAX_NUM; + + /* Copy images into buffers for card's bus-master reads ... */ + + /* Runtime instructions (first block of data in file) */ + D_INFO("Copying (but not loading) uCode instr len %zd\n", + pieces.inst_size); + memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); + + D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", + il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); + + /* + * Runtime data + * NOTE: Copy into backup buffer will be done in il_up() + */ + D_INFO("Copying (but not loading) uCode data len %zd\n", + pieces.data_size); + memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); + memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); + + /* Initialization instructions */ + if (pieces.init_size) { + D_INFO("Copying (but not loading) init instr len %zd\n", + pieces.init_size); + memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); + } + + /* Initialization data */ + if (pieces.init_data_size) { + D_INFO("Copying (but not loading) init data len %zd\n", + pieces.init_data_size); + memcpy(il->ucode_init_data.v_addr, pieces.init_data, + pieces.init_data_size); + } + + /* Bootstrap instructions */ + D_INFO("Copying (but not loading) boot instr len %zd\n", + pieces.boot_size); + memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); + + /* + * figure out the offset of chain noise reset and gain commands + * base on the size of standard phy calibration commands table size + */ + il->_4965.phy_calib_chain_noise_reset_cmd = + standard_phy_calibration_size; + il->_4965.phy_calib_chain_noise_gain_cmd = + standard_phy_calibration_size + 1; + + /************************************************** + * This is still part of probe() in a sense... + * + * 9. Setup and register with mac80211 and debugfs + **************************************************/ + err = il4965_mac_setup_register(il, max_probe_length); + if (err) + goto out_unbind; + + err = il_dbgfs_register(il, DRV_NAME); + if (err) + IL_ERR("failed to create debugfs files. Ignoring error: %d\n", + err); + + err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group); + if (err) { + IL_ERR("failed to create sysfs device attributes\n"); + goto out_unbind; + } + + /* We have our copies now, allow OS release its copies */ + release_firmware(ucode_raw); + complete(&il->_4965.firmware_loading_complete); + return; + +try_again: + /* try next, if any */ + if (il4965_request_firmware(il, false)) + goto out_unbind; + release_firmware(ucode_raw); + return; + +err_pci_alloc: + IL_ERR("failed to allocate pci memory\n"); + il4965_dealloc_ucode_pci(il); +out_unbind: + complete(&il->_4965.firmware_loading_complete); + device_release_driver(&il->pci_dev->dev); + release_firmware(ucode_raw); +} + +static const char *const desc_lookup_text[] = { + "OK", + "FAIL", + "BAD_PARAM", + "BAD_CHECKSUM", + "NMI_INTERRUPT_WDG", + "SYSASSERT", + "FATAL_ERROR", + "BAD_COMMAND", + "HW_ERROR_TUNE_LOCK", + "HW_ERROR_TEMPERATURE", + "ILLEGAL_CHAN_FREQ", + "VCC_NOT_STBL", + "FH49_ERROR", + "NMI_INTERRUPT_HOST", + "NMI_INTERRUPT_ACTION_PT", + "NMI_INTERRUPT_UNKNOWN", + "UCODE_VERSION_MISMATCH", + "HW_ERROR_ABS_LOCK", + "HW_ERROR_CAL_LOCK_FAIL", + "NMI_INTERRUPT_INST_ACTION_PT", + "NMI_INTERRUPT_DATA_ACTION_PT", + "NMI_TRM_HW_ER", + "NMI_INTERRUPT_TRM", + "NMI_INTERRUPT_BREAK_POINT", + "DEBUG_0", + "DEBUG_1", + "DEBUG_2", + "DEBUG_3", +}; + +static struct { + char *name; + u8 num; +} advanced_lookup[] = { + { + "NMI_INTERRUPT_WDG", 0x34}, { + "SYSASSERT", 0x35}, { + "UCODE_VERSION_MISMATCH", 0x37}, { + "BAD_COMMAND", 0x38}, { + "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, { + "FATAL_ERROR", 0x3D}, { + "NMI_TRM_HW_ERR", 0x46}, { + "NMI_INTERRUPT_TRM", 0x4C}, { + "NMI_INTERRUPT_BREAK_POINT", 0x54}, { + "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, { + "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, { + "NMI_INTERRUPT_HOST", 0x66}, { + "NMI_INTERRUPT_ACTION_PT", 0x7C}, { + "NMI_INTERRUPT_UNKNOWN", 0x84}, { + "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, { +"ADVANCED_SYSASSERT", 0},}; + +static const char * +il4965_desc_lookup(u32 num) +{ + int i; + int max = ARRAY_SIZE(desc_lookup_text); + + if (num < max) + return desc_lookup_text[num]; + + max = ARRAY_SIZE(advanced_lookup) - 1; + for (i = 0; i < max; i++) { + if (advanced_lookup[i].num == num) + break; + } + return advanced_lookup[i].name; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void +il4965_dump_nic_error_log(struct il_priv *il) +{ + u32 data2, line; + u32 desc, time, count, base, data1; + u32 blink1, blink2, ilink1, ilink2; + u32 pc, hcmd; + + if (il->ucode_type == UCODE_INIT) + base = le32_to_cpu(il->card_alive_init.error_event_table_ptr); + else + base = le32_to_cpu(il->card_alive.error_event_table_ptr); + + if (!il->ops->is_valid_rtc_data_addr(base)) { + IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n", + base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT"); + return; + } + + count = il_read_targ_mem(il, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IL_ERR("Start IWL Error Log Dump:\n"); + IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); + } + + desc = il_read_targ_mem(il, base + 1 * sizeof(u32)); + il->isr_stats.err_code = desc; + pc = il_read_targ_mem(il, base + 2 * sizeof(u32)); + blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32)); + blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32)); + ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32)); + ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32)); + data1 = il_read_targ_mem(il, base + 7 * sizeof(u32)); + data2 = il_read_targ_mem(il, base + 8 * sizeof(u32)); + line = il_read_targ_mem(il, base + 9 * sizeof(u32)); + time = il_read_targ_mem(il, base + 11 * sizeof(u32)); + hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32)); + + IL_ERR("Desc Time " + "data1 data2 line\n"); + IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", + il4965_desc_lookup(desc), desc, time, data1, data2, line); + IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n"); + IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1, + blink2, ilink1, ilink2, hcmd); +} + +static void +il4965_rf_kill_ct_config(struct il_priv *il) +{ + struct il_ct_kill_config cmd; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&il->lock, flags); + _il_wr(il, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + spin_unlock_irqrestore(&il->lock, flags); + + cmd.critical_temperature_R = + cpu_to_le32(il->hw_params.ct_kill_threshold); + + ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd); + if (ret) + IL_ERR("C_CT_KILL_CONFIG failed\n"); + else + D_INFO("C_CT_KILL_CONFIG " "succeeded, " + "critical temperature is %d\n", + il->hw_params.ct_kill_threshold); +} + +static const s8 default_queue_to_tx_fifo[] = { + IL_TX_FIFO_VO, + IL_TX_FIFO_VI, + IL_TX_FIFO_BE, + IL_TX_FIFO_BK, + IL49_CMD_FIFO_NUM, + IL_TX_FIFO_UNUSED, + IL_TX_FIFO_UNUSED, +}; + +#define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) + +static int +il4965_alive_notify(struct il_priv *il) +{ + u32 a; + unsigned long flags; + int i, chan; + u32 reg_val; + + spin_lock_irqsave(&il->lock, flags); + + /* Clear 4965's internal Tx Scheduler data base */ + il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR); + a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET; + for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) + il_write_targ_mem(il, a, 0); + for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) + il_write_targ_mem(il, a, 0); + for (; + a < + il->scd_base_addr + + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); + a += 4) + il_write_targ_mem(il, a, 0); + + /* Tel 4965 where to find Tx byte count tables */ + il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10); + + /* Enable DMA channel */ + for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++) + il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan), + FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); + + /* Update FH chicken bits */ + reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG); + il_wr(il, FH49_TX_CHICKEN_BITS_REG, + reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); + + /* Disable chain mode for all queues */ + il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0); + + /* Initialize each Tx queue (including the command queue) */ + for (i = 0; i < il->hw_params.max_txq_num; i++) { + + /* TFD circular buffer read/write idxes */ + il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0); + il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8)); + + /* Max Tx Window size for Scheduler-ACK mode */ + il_write_targ_mem(il, + il->scd_base_addr + + IL49_SCD_CONTEXT_QUEUE_OFFSET(i), + (SCD_WIN_SIZE << + IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + + /* Frame limit */ + il_write_targ_mem(il, + il->scd_base_addr + + IL49_SCD_CONTEXT_QUEUE_OFFSET(i) + + sizeof(u32), + (SCD_FRAME_LIMIT << + IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + + } + il_wr_prph(il, IL49_SCD_INTERRUPT_MASK, + (1 << il->hw_params.max_txq_num) - 1); + + /* Activate all Tx DMA/FIFO channels */ + il4965_txq_set_sched(il, IL_MASK(0, 6)); + + il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0); + + /* make sure all queue are not stopped */ + memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped)); + for (i = 0; i < 4; i++) + atomic_set(&il->queue_stop_count[i], 0); + + /* reset to 0 to enable all the queue first */ + il->txq_ctx_active_msk = 0; + /* Map each Tx/cmd queue to its corresponding fifo */ + BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); + + for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { + int ac = default_queue_to_tx_fifo[i]; + + il_txq_ctx_activate(il, i); + + if (ac == IL_TX_FIFO_UNUSED) + continue; + + il4965_tx_queue_set_status(il, &il->txq[i], ac, 0); + } + + spin_unlock_irqrestore(&il->lock, flags); + + return 0; +} + +/** + * il4965_alive_start - called after N_ALIVE notification received + * from protocol/runtime uCode (initialization uCode's + * Alive gets handled by il_init_alive_start()). + */ +static void +il4965_alive_start(struct il_priv *il) +{ + int ret = 0; + + D_INFO("Runtime Alive received.\n"); + + if (il->card_alive.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + D_INFO("Alive failed.\n"); + goto restart; + } + + /* Initialize uCode has loaded Runtime uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "runtime" alive if code weren't properly loaded. */ + if (il4965_verify_ucode(il)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + D_INFO("Bad runtime uCode load.\n"); + goto restart; + } + + ret = il4965_alive_notify(il); + if (ret) { + IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret); + goto restart; + } + + /* After the ALIVE response, we can send host commands to the uCode */ + set_bit(S_ALIVE, &il->status); + + /* Enable watchdog to monitor the driver tx queues */ + il_setup_watchdog(il); + + if (il_is_rfkill(il)) + return; + + ieee80211_wake_queues(il->hw); + + il->active_rate = RATES_MASK; + + il_power_update_mode(il, true); + D_INFO("Updated power mode\n"); + + if (il_is_associated(il)) { + struct il_rxon_cmd *active_rxon = + (struct il_rxon_cmd *)&il->active; + /* apply any changes in staging */ + il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + } else { + /* Initialize our rx_config data */ + il_connection_init_rx_config(il); + + if (il->ops->set_rxon_chain) + il->ops->set_rxon_chain(il); + } + + /* Configure bluetooth coexistence if enabled */ + il_send_bt_config(il); + + il4965_reset_run_time_calib(il); + + set_bit(S_READY, &il->status); + + /* Configure the adapter for unassociated operation */ + il_commit_rxon(il); + + /* At this point, the NIC is initialized and operational */ + il4965_rf_kill_ct_config(il); + + D_INFO("ALIVE processing complete.\n"); + wake_up(&il->wait_command_queue); + + return; + +restart: + queue_work(il->workqueue, &il->restart); +} + +static void il4965_cancel_deferred_work(struct il_priv *il); + +static void +__il4965_down(struct il_priv *il) +{ + unsigned long flags; + int exit_pending; + + D_INFO(DRV_NAME " is going down\n"); + + il_scan_cancel_timeout(il, 200); + + exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); + + /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set + * to prevent rearm timer */ + del_timer_sync(&il->watchdog); + + il_clear_ucode_stations(il); + + /* FIXME: race conditions ? */ + spin_lock_irq(&il->sta_lock); + /* + * Remove all key information that is not stored as part + * of station information since mac80211 may not have had + * a chance to remove all the keys. When device is + * reconfigured by mac80211 after an error all keys will + * be reconfigured. + */ + memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys)); + il->_4965.key_mapping_keys = 0; + spin_unlock_irq(&il->sta_lock); + + il_dealloc_bcast_stations(il); + il_clear_driver_stations(il); + + /* Unblock any waiting calls */ + wake_up_all(&il->wait_command_queue); + + /* Wipe out the EXIT_PENDING status bit if we are not actually + * exiting the module */ + if (!exit_pending) + clear_bit(S_EXIT_PENDING, &il->status); + + /* stop and reset the on-board processor */ + _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); + + /* tell the device to stop sending interrupts */ + spin_lock_irqsave(&il->lock, flags); + il_disable_interrupts(il); + spin_unlock_irqrestore(&il->lock, flags); + il4965_synchronize_irq(il); + + if (il->mac80211_registered) + ieee80211_stop_queues(il->hw); + + /* If we have not previously called il_init() then + * clear all bits but the RF Kill bit and return */ + if (!il_is_init(il)) { + il->status = + test_bit(S_RFKILL, &il->status) << S_RFKILL | + test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | + test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; + goto exit; + } + + /* ...otherwise clear out all the status bits but the RF Kill + * bit and continue taking the NIC down. */ + il->status &= + test_bit(S_RFKILL, &il->status) << S_RFKILL | + test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | + test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | + test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; + + /* + * We disabled and synchronized interrupt, and priv->mutex is taken, so + * here is the only thread which will program device registers, but + * still have lockdep assertions, so we are taking reg_lock. + */ + spin_lock_irq(&il->reg_lock); + /* FIXME: il_grab_nic_access if rfkill is off ? */ + + il4965_txq_ctx_stop(il); + il4965_rxq_stop(il); + /* Power-down device's busmaster DMA clocks */ + _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); + udelay(5); + /* Make sure (redundant) we've released our request to stay awake */ + _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + /* Stop the device, and put it in low power state */ + _il_apm_stop(il); + + spin_unlock_irq(&il->reg_lock); + + il4965_txq_ctx_unmap(il); +exit: + memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); + + dev_kfree_skb(il->beacon_skb); + il->beacon_skb = NULL; + + /* clear out any free frames */ + il4965_clear_free_frames(il); +} + +static void +il4965_down(struct il_priv *il) +{ + mutex_lock(&il->mutex); + __il4965_down(il); + mutex_unlock(&il->mutex); + + il4965_cancel_deferred_work(il); +} + + +static void +il4965_set_hw_ready(struct il_priv *il) +{ + int ret; + + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); + + /* See if we got it */ + ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, + CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, + 100); + if (ret >= 0) + il->hw_ready = true; + + D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not"); +} + +static void +il4965_prepare_card_hw(struct il_priv *il) +{ + int ret; + + il->hw_ready = false; + + il4965_set_hw_ready(il); + if (il->hw_ready) + return; + + /* If HW is not ready, prepare the conditions to check again */ + il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE); + + ret = + _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, + ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, + CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); + + /* HW should be ready by now, check again. */ + if (ret != -ETIMEDOUT) + il4965_set_hw_ready(il); +} + +#define MAX_HW_RESTARTS 5 + +static int +__il4965_up(struct il_priv *il) +{ + int i; + int ret; + + if (test_bit(S_EXIT_PENDING, &il->status)) { + IL_WARN("Exit pending; will not bring the NIC up\n"); + return -EIO; + } + + if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { + IL_ERR("ucode not available for device bringup\n"); + return -EIO; + } + + ret = il4965_alloc_bcast_station(il); + if (ret) { + il_dealloc_bcast_stations(il); + return ret; + } + + il4965_prepare_card_hw(il); + if (!il->hw_ready) { + il_dealloc_bcast_stations(il); + IL_ERR("HW not ready\n"); + return -EIO; + } + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(S_RFKILL, &il->status); + else { + set_bit(S_RFKILL, &il->status); + wiphy_rfkill_set_hw_state(il->hw->wiphy, true); + + il_dealloc_bcast_stations(il); + il_enable_rfkill_int(il); + IL_WARN("Radio disabled by HW RF Kill switch\n"); + return 0; + } + + _il_wr(il, CSR_INT, 0xFFFFFFFF); + + /* must be initialised before il_hw_nic_init */ + il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM; + + ret = il4965_hw_nic_init(il); + if (ret) { + IL_ERR("Unable to init nic\n"); + il_dealloc_bcast_stations(il); + return ret; + } + + /* make sure rfkill handshake bits are cleared */ + _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + /* clear (again), then enable host interrupts */ + _il_wr(il, CSR_INT, 0xFFFFFFFF); + il_enable_interrupts(il); + + /* really make sure rfkill handshake bits are cleared */ + _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* Copy original ucode data image from disk into backup cache. + * This will be used to initialize the on-board processor's + * data SRAM for a clean start when the runtime program first loads. */ + memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, + il->ucode_data.len); + + for (i = 0; i < MAX_HW_RESTARTS; i++) { + + /* load bootstrap state machine, + * load bootstrap program into processor's memory, + * prepare to load the "initialize" uCode */ + ret = il->ops->load_ucode(il); + + if (ret) { + IL_ERR("Unable to set up bootstrap uCode: %d\n", ret); + continue; + } + + /* start card; "initialize" will load runtime ucode */ + il4965_nic_start(il); + + D_INFO(DRV_NAME " is coming up\n"); + + return 0; + } + + set_bit(S_EXIT_PENDING, &il->status); + __il4965_down(il); + clear_bit(S_EXIT_PENDING, &il->status); + + /* tried to restart and config the device for as long as our + * patience could withstand */ + IL_ERR("Unable to initialize device after %d attempts.\n", i); + return -EIO; +} + +/***************************************************************************** + * + * Workqueue callbacks + * + *****************************************************************************/ + +static void +il4965_bg_init_alive_start(struct work_struct *data) +{ + struct il_priv *il = + container_of(data, struct il_priv, init_alive_start.work); + + mutex_lock(&il->mutex); + if (test_bit(S_EXIT_PENDING, &il->status)) + goto out; + + il->ops->init_alive_start(il); +out: + mutex_unlock(&il->mutex); +} + +static void +il4965_bg_alive_start(struct work_struct *data) +{ + struct il_priv *il = + container_of(data, struct il_priv, alive_start.work); + + mutex_lock(&il->mutex); + if (test_bit(S_EXIT_PENDING, &il->status)) + goto out; + + il4965_alive_start(il); +out: + mutex_unlock(&il->mutex); +} + +static void +il4965_bg_run_time_calib_work(struct work_struct *work) +{ + struct il_priv *il = container_of(work, struct il_priv, + run_time_calib_work); + + mutex_lock(&il->mutex); + + if (test_bit(S_EXIT_PENDING, &il->status) || + test_bit(S_SCANNING, &il->status)) { + mutex_unlock(&il->mutex); + return; + } + + if (il->start_calib) { + il4965_chain_noise_calibration(il, (void *)&il->_4965.stats); + il4965_sensitivity_calibration(il, (void *)&il->_4965.stats); + } + + mutex_unlock(&il->mutex); +} + +static void +il4965_bg_restart(struct work_struct *data) +{ + struct il_priv *il = container_of(data, struct il_priv, restart); + + if (test_bit(S_EXIT_PENDING, &il->status)) + return; + + if (test_and_clear_bit(S_FW_ERROR, &il->status)) { + mutex_lock(&il->mutex); + il->is_open = 0; + + __il4965_down(il); + + mutex_unlock(&il->mutex); + il4965_cancel_deferred_work(il); + ieee80211_restart_hw(il->hw); + } else { + il4965_down(il); + + mutex_lock(&il->mutex); + if (test_bit(S_EXIT_PENDING, &il->status)) { + mutex_unlock(&il->mutex); + return; + } + + __il4965_up(il); + mutex_unlock(&il->mutex); + } +} + +static void +il4965_bg_rx_replenish(struct work_struct *data) +{ + struct il_priv *il = container_of(data, struct il_priv, rx_replenish); + + if (test_bit(S_EXIT_PENDING, &il->status)) + return; + + mutex_lock(&il->mutex); + il4965_rx_replenish(il); + mutex_unlock(&il->mutex); +} + +/***************************************************************************** + * + * mac80211 entry point functions + * + *****************************************************************************/ + +#define UCODE_READY_TIMEOUT (4 * HZ) + +/* + * Not a mac80211 entry point function, but it fits in with all the + * other mac80211 functions grouped here. + */ +static int +il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) +{ + int ret; + struct ieee80211_hw *hw = il->hw; + + hw->rate_control_algorithm = "iwl-4965-rs"; + + /* Tell mac80211 our characteristics */ + ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); + ieee80211_hw_set(hw, SUPPORTS_PS); + ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); + ieee80211_hw_set(hw, SPECTRUM_MGMT); + ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC); + ieee80211_hw_set(hw, SIGNAL_DBM); + ieee80211_hw_set(hw, AMPDU_AGGREGATION); + if (il->cfg->sku & IL_SKU_N) + hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS | + NL80211_FEATURE_STATIC_SMPS; + + hw->sta_data_size = sizeof(struct il_station_priv); + hw->vif_data_size = sizeof(struct il_vif_priv); + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); + + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | + REGULATORY_DISABLE_BEACON_HINTS; + + /* + * For now, disable PS by default because it affects + * RX performance significantly. + */ + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; + /* we create the 802.11 header and a zero-length SSID element */ + hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; + + /* Default value; 4 EDCA QOS priorities */ + hw->queues = 4; + + hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL; + + if (il->bands[NL80211_BAND_2GHZ].n_channels) + il->hw->wiphy->bands[NL80211_BAND_2GHZ] = + &il->bands[NL80211_BAND_2GHZ]; + if (il->bands[NL80211_BAND_5GHZ].n_channels) + il->hw->wiphy->bands[NL80211_BAND_5GHZ] = + &il->bands[NL80211_BAND_5GHZ]; + + il_leds_init(il); + + wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + ret = ieee80211_register_hw(il->hw); + if (ret) { + IL_ERR("Failed to register hw (error %d)\n", ret); + return ret; + } + il->mac80211_registered = 1; + + return 0; +} + +int +il4965_mac_start(struct ieee80211_hw *hw) +{ + struct il_priv *il = hw->priv; + int ret; + + D_MAC80211("enter\n"); + + /* we should be verifying the device is ready to be opened */ + mutex_lock(&il->mutex); + ret = __il4965_up(il); + mutex_unlock(&il->mutex); + + if (ret) + return ret; + + if (il_is_rfkill(il)) + goto out; + + D_INFO("Start UP work done.\n"); + + /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from + * mac80211 will not be run successfully. */ + ret = wait_event_timeout(il->wait_command_queue, + test_bit(S_READY, &il->status), + UCODE_READY_TIMEOUT); + if (!ret) { + if (!test_bit(S_READY, &il->status)) { + IL_ERR("START_ALIVE timeout after %dms.\n", + jiffies_to_msecs(UCODE_READY_TIMEOUT)); + return -ETIMEDOUT; + } + } + + il4965_led_enable(il); + +out: + il->is_open = 1; + D_MAC80211("leave\n"); + return 0; +} + +void +il4965_mac_stop(struct ieee80211_hw *hw) +{ + struct il_priv *il = hw->priv; + + D_MAC80211("enter\n"); + + if (!il->is_open) + return; + + il->is_open = 0; + + il4965_down(il); + + flush_workqueue(il->workqueue); + + /* User space software may expect getting rfkill changes + * even if interface is down */ + _il_wr(il, CSR_INT, 0xFFFFFFFF); + il_enable_rfkill_int(il); + + D_MAC80211("leave\n"); +} + +void +il4965_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct il_priv *il = hw->priv; + + D_MACDUMP("enter\n"); + + D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, + ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); + + if (il4965_tx_skb(il, control->sta, skb)) + dev_kfree_skb_any(skb); + + D_MACDUMP("leave\n"); +} + +void +il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, u16 * phase1key) +{ + struct il_priv *il = hw->priv; + + D_MAC80211("enter\n"); + + il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key); + + D_MAC80211("leave\n"); +} + +int +il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct il_priv *il = hw->priv; + int ret; + u8 sta_id; + bool is_default_wep_key = false; + + D_MAC80211("enter\n"); + + if (il->cfg->mod_params->sw_crypto) { + D_MAC80211("leave - hwcrypto disabled\n"); + return -EOPNOTSUPP; + } + + /* + * To support IBSS RSN, don't program group keys in IBSS, the + * hardware will then not attempt to decrypt the frames. + */ + if (vif->type == NL80211_IFTYPE_ADHOC && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + D_MAC80211("leave - ad-hoc group key\n"); + return -EOPNOTSUPP; + } + + sta_id = il_sta_id_or_broadcast(il, sta); + if (sta_id == IL_INVALID_STATION) + return -EINVAL; + + mutex_lock(&il->mutex); + il_scan_cancel_timeout(il, 100); + + /* + * If we are getting WEP group key and we didn't receive any key mapping + * so far, we are in legacy wep mode (group key only), otherwise we are + * in 1X mode. + * In legacy wep mode, we use another host command to the uCode. + */ + if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || + key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { + if (cmd == SET_KEY) + is_default_wep_key = !il->_4965.key_mapping_keys; + else + is_default_wep_key = + (key->hw_key_idx == HW_KEY_DEFAULT); + } + + switch (cmd) { + case SET_KEY: + if (is_default_wep_key) + ret = il4965_set_default_wep_key(il, key); + else + ret = il4965_set_dynamic_key(il, key, sta_id); + + D_MAC80211("enable hwcrypto key\n"); + break; + case DISABLE_KEY: + if (is_default_wep_key) + ret = il4965_remove_default_wep_key(il, key); + else + ret = il4965_remove_dynamic_key(il, key, sta_id); + + D_MAC80211("disable hwcrypto key\n"); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&il->mutex); + D_MAC80211("leave\n"); + + return ret; +} + +int +il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_ampdu_params *params) +{ + struct il_priv *il = hw->priv; + int ret = -EINVAL; + struct ieee80211_sta *sta = params->sta; + enum ieee80211_ampdu_mlme_action action = params->action; + u16 tid = params->tid; + u16 *ssn = ¶ms->ssn; + + D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid); + + if (!(il->cfg->sku & IL_SKU_N)) + return -EACCES; + + mutex_lock(&il->mutex); + + switch (action) { + case IEEE80211_AMPDU_RX_START: + D_HT("start Rx\n"); + ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn); + break; + case IEEE80211_AMPDU_RX_STOP: + D_HT("stop Rx\n"); + ret = il4965_sta_rx_agg_stop(il, sta, tid); + if (test_bit(S_EXIT_PENDING, &il->status)) + ret = 0; + break; + case IEEE80211_AMPDU_TX_START: + D_HT("start Tx\n"); + ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); + break; + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + D_HT("stop Tx\n"); + ret = il4965_tx_agg_stop(il, vif, sta, tid); + if (test_bit(S_EXIT_PENDING, &il->status)) + ret = 0; + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + ret = 0; + break; + } + mutex_unlock(&il->mutex); + + return ret; +} + +int +il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct il_priv *il = hw->priv; + struct il_station_priv *sta_priv = (void *)sta->drv_priv; + bool is_ap = vif->type == NL80211_IFTYPE_STATION; + int ret; + u8 sta_id; + + D_INFO("received request to add station %pM\n", sta->addr); + mutex_lock(&il->mutex); + D_INFO("proceeding to add station %pM\n", sta->addr); + sta_priv->common.sta_id = IL_INVALID_STATION; + + atomic_set(&sta_priv->pending_frames, 0); + + ret = + il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); + if (ret) { + IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); + /* Should we return success if return code is EEXIST ? */ + mutex_unlock(&il->mutex); + return ret; + } + + sta_priv->common.sta_id = sta_id; + + /* Initialize rate scaling */ + D_INFO("Initializing rate scaling for station %pM\n", sta->addr); + il4965_rs_rate_init(il, sta, sta_id); + mutex_unlock(&il->mutex); + + return 0; +} + +void +il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_channel_switch *ch_switch) +{ + struct il_priv *il = hw->priv; + const struct il_channel_info *ch_info; + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_channel *channel = ch_switch->chandef.chan; + struct il_ht_config *ht_conf = &il->current_ht_config; + u16 ch; + + D_MAC80211("enter\n"); + + mutex_lock(&il->mutex); + + if (il_is_rfkill(il)) + goto out; + + if (test_bit(S_EXIT_PENDING, &il->status) || + test_bit(S_SCANNING, &il->status) || + test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) + goto out; + + if (!il_is_associated(il)) + goto out; + + if (!il->ops->set_channel_switch) + goto out; + + ch = channel->hw_value; + if (le16_to_cpu(il->active.channel) == ch) + goto out; + + ch_info = il_get_channel_info(il, channel->band, ch); + if (!il_is_channel_valid(ch_info)) { + D_MAC80211("invalid channel\n"); + goto out; + } + + spin_lock_irq(&il->lock); + + il->current_ht_config.smps = conf->smps_mode; + + /* Configure HT40 channels */ + switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: + il->ht.is_40mhz = false; + il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + break; + case NL80211_CHAN_HT40MINUS: + il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; + il->ht.is_40mhz = true; + break; + case NL80211_CHAN_HT40PLUS: + il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + il->ht.is_40mhz = true; + break; + } + + if ((le16_to_cpu(il->staging.channel) != ch)) + il->staging.flags = 0; + + il_set_rxon_channel(il, channel); + il_set_rxon_ht(il, ht_conf); + il_set_flags_for_band(il, channel->band, il->vif); + + spin_unlock_irq(&il->lock); + + il_set_rate(il); + /* + * at this point, staging_rxon has the + * configuration for channel switch + */ + set_bit(S_CHANNEL_SWITCH_PENDING, &il->status); + il->switch_channel = cpu_to_le16(ch); + if (il->ops->set_channel_switch(il, ch_switch)) { + clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status); + il->switch_channel = 0; + ieee80211_chswitch_done(il->vif, false); + } + +out: + mutex_unlock(&il->mutex); + D_MAC80211("leave\n"); +} + +void +il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, + unsigned int *total_flags, u64 multicast) +{ + struct il_priv *il = hw->priv; + __le32 filter_or = 0, filter_nand = 0; + +#define CHK(test, flag) do { \ + if (*total_flags & (test)) \ + filter_or |= (flag); \ + else \ + filter_nand |= (flag); \ + } while (0) + + D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, + *total_flags); + + CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK); + /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ + CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); + CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); + +#undef CHK + + mutex_lock(&il->mutex); + + il->staging.filter_flags &= ~filter_nand; + il->staging.filter_flags |= filter_or; + + /* + * Not committing directly because hardware can perform a scan, + * but we'll eventually commit the filter flags change anyway. + */ + + mutex_unlock(&il->mutex); + + /* + * Receiving all multicast frames is always enabled by the + * default flags setup in il_connection_init_rx_config() + * since we currently do not support programming multicast + * filters into the device. + */ + *total_flags &= + FIF_OTHER_BSS | FIF_ALLMULTI | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + +/***************************************************************************** + * + * driver setup and teardown + * + *****************************************************************************/ + +static void +il4965_bg_txpower_work(struct work_struct *work) +{ + struct il_priv *il = container_of(work, struct il_priv, + txpower_work); + + mutex_lock(&il->mutex); + + /* If a scan happened to start before we got here + * then just return; the stats notification will + * kick off another scheduled work to compensate for + * any temperature delta we missed here. */ + if (test_bit(S_EXIT_PENDING, &il->status) || + test_bit(S_SCANNING, &il->status)) + goto out; + + /* Regardless of if we are associated, we must reconfigure the + * TX power since frames can be sent on non-radar channels while + * not associated */ + il->ops->send_tx_power(il); + + /* Update last_temperature to keep is_calib_needed from running + * when it isn't needed... */ + il->last_temperature = il->temperature; +out: + mutex_unlock(&il->mutex); +} + +static void +il4965_setup_deferred_work(struct il_priv *il) +{ + il->workqueue = create_singlethread_workqueue(DRV_NAME); + + init_waitqueue_head(&il->wait_command_queue); + + INIT_WORK(&il->restart, il4965_bg_restart); + INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish); + INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work); + INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start); + INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start); + + il_setup_scan_deferred_work(il); + + INIT_WORK(&il->txpower_work, il4965_bg_txpower_work); + + timer_setup(&il->stats_periodic, il4965_bg_stats_periodic, 0); + + timer_setup(&il->watchdog, il_bg_watchdog, 0); + + tasklet_init(&il->irq_tasklet, + il4965_irq_tasklet, + (unsigned long)il); +} + +static void +il4965_cancel_deferred_work(struct il_priv *il) +{ + cancel_work_sync(&il->txpower_work); + cancel_delayed_work_sync(&il->init_alive_start); + cancel_delayed_work(&il->alive_start); + cancel_work_sync(&il->run_time_calib_work); + + il_cancel_scan_deferred_work(il); + + del_timer_sync(&il->stats_periodic); +} + +static void +il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) +{ + int i; + + for (i = 0; i < RATE_COUNT_LEGACY; i++) { + rates[i].bitrate = il_rates[i].ieee * 5; + rates[i].hw_value = i; /* Rate scaling will work on idxes */ + rates[i].hw_value_short = i; + rates[i].flags = 0; + if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) { + /* + * If CCK != 1M then set short preamble rate flag. + */ + rates[i].flags |= + (il_rates[i].plcp == + RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; + } + } +} + +/* + * Acquire il->lock before calling this function ! + */ +void +il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx) +{ + il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8)); + il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx); +} + +void +il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq, + int tx_fifo_id, int scd_retry) +{ + int txq_id = txq->q.id; + + /* Find out whether to activate Tx queue */ + int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0; + + /* Set up and activate */ + il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), + (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | + (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) | + (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) | + (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | + IL49_SCD_QUEUE_STTS_REG_MSK); + + txq->sched_retry = scd_retry; + + D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate", + scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); +} + +static const struct ieee80211_ops il4965_mac_ops = { + .tx = il4965_mac_tx, + .start = il4965_mac_start, + .stop = il4965_mac_stop, + .add_interface = il_mac_add_interface, + .remove_interface = il_mac_remove_interface, + .change_interface = il_mac_change_interface, + .config = il_mac_config, + .configure_filter = il4965_configure_filter, + .set_key = il4965_mac_set_key, + .update_tkip_key = il4965_mac_update_tkip_key, + .conf_tx = il_mac_conf_tx, + .reset_tsf = il_mac_reset_tsf, + .bss_info_changed = il_mac_bss_info_changed, + .ampdu_action = il4965_mac_ampdu_action, + .hw_scan = il_mac_hw_scan, + .sta_add = il4965_mac_sta_add, + .sta_remove = il_mac_sta_remove, + .channel_switch = il4965_mac_channel_switch, + .tx_last_beacon = il_mac_tx_last_beacon, + .flush = il_mac_flush, +}; + +static int +il4965_init_drv(struct il_priv *il) +{ + int ret; + + spin_lock_init(&il->sta_lock); + spin_lock_init(&il->hcmd_lock); + + INIT_LIST_HEAD(&il->free_frames); + + mutex_init(&il->mutex); + + il->ieee_channels = NULL; + il->ieee_rates = NULL; + il->band = NL80211_BAND_2GHZ; + + il->iw_mode = NL80211_IFTYPE_STATION; + il->current_ht_config.smps = IEEE80211_SMPS_STATIC; + il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; + + /* initialize force reset */ + il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; + + /* Choose which receivers/antennas to use */ + if (il->ops->set_rxon_chain) + il->ops->set_rxon_chain(il); + + il_init_scan_params(il); + + ret = il_init_channel_map(il); + if (ret) { + IL_ERR("initializing regulatory failed: %d\n", ret); + goto err; + } + + ret = il_init_geos(il); + if (ret) { + IL_ERR("initializing geos failed: %d\n", ret); + goto err_free_channel_map; + } + il4965_init_hw_rates(il, il->ieee_rates); + + return 0; + +err_free_channel_map: + il_free_channel_map(il); +err: + return ret; +} + +static void +il4965_uninit_drv(struct il_priv *il) +{ + il_free_geos(il); + il_free_channel_map(il); + kfree(il->scan_cmd); +} + +static void +il4965_hw_detect(struct il_priv *il) +{ + il->hw_rev = _il_rd(il, CSR_HW_REV); + il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG); + il->rev_id = il->pci_dev->revision; + D_INFO("HW Revision ID = 0x%X\n", il->rev_id); +} + +static const struct il_sensitivity_ranges il4965_sensitivity = { + .min_nrg_cck = 97, + .max_nrg_cck = 0, /* not used, set to 0 */ + + .auto_corr_min_ofdm = 85, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 140, + .auto_corr_max_ofdm_mrc_x1 = 270, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 200, + .auto_corr_max_cck_mrc = 400, + + .nrg_th_cck = 100, + .nrg_th_ofdm = 100, + + .barker_corr_th_min = 190, + .barker_corr_th_min_mrc = 390, + .nrg_th_cca = 62, +}; + +static void +il4965_set_hw_params(struct il_priv *il) +{ + il->hw_params.bcast_id = IL4965_BROADCAST_ID; + il->hw_params.max_rxq_size = RX_QUEUE_SIZE; + il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; + if (il->cfg->mod_params->amsdu_size_8K) + il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K); + else + il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K); + + il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL; + + if (il->cfg->mod_params->disable_11n) + il->cfg->sku &= ~IL_SKU_N; + + if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES && + il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES) + il->cfg->num_of_queues = + il->cfg->mod_params->num_of_queues; + + il->hw_params.max_txq_num = il->cfg->num_of_queues; + il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; + il->hw_params.scd_bc_tbls_size = + il->cfg->num_of_queues * + sizeof(struct il4965_scd_bc_tbl); + + il->hw_params.tfd_size = sizeof(struct il_tfd); + il->hw_params.max_stations = IL4965_STATION_COUNT; + il->hw_params.max_data_size = IL49_RTC_DATA_SIZE; + il->hw_params.max_inst_size = IL49_RTC_INST_SIZE; + il->hw_params.max_bsm_size = BSM_SRAM_SIZE; + il->hw_params.ht40_channel = BIT(NL80211_BAND_5GHZ); + + il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR; + + il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant); + il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant); + il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant; + il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant; + + il->hw_params.ct_kill_threshold = + CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); + + il->hw_params.sens = &il4965_sensitivity; + il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS; +} + +static int +il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = 0; + struct il_priv *il; + struct ieee80211_hw *hw; + struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); + unsigned long flags; + u16 pci_cmd; + + /************************ + * 1. Allocating HW data + ************************/ + + hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops); + if (!hw) { + err = -ENOMEM; + goto out; + } + il = hw->priv; + il->hw = hw; + SET_IEEE80211_DEV(hw, &pdev->dev); + + D_INFO("*** LOAD DRIVER ***\n"); + il->cfg = cfg; + il->ops = &il4965_ops; +#ifdef CONFIG_IWLEGACY_DEBUGFS + il->debugfs_ops = &il4965_debugfs_ops; +#endif + il->pci_dev = pdev; + il->inta_mask = CSR_INI_SET_MASK; + + /************************** + * 2. Initializing PCI bus + **************************/ + pci_disable_link_state(pdev, + PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + + if (pci_enable_device(pdev)) { + err = -ENODEV; + goto out_ieee80211_free_hw; + } + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); + if (err) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = + pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + /* both attempts failed: */ + if (err) { + IL_WARN("No suitable DMA available.\n"); + goto out_pci_disable_device; + } + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto out_pci_disable_device; + + pci_set_drvdata(pdev, il); + + /*********************** + * 3. Read REV register + ***********************/ + il->hw_base = pci_ioremap_bar(pdev, 0); + if (!il->hw_base) { + err = -ENODEV; + goto out_pci_release_regions; + } + + D_INFO("pci_resource_len = 0x%08llx\n", + (unsigned long long)pci_resource_len(pdev, 0)); + D_INFO("pci_resource_base = %p\n", il->hw_base); + + /* these spin locks will be used in apm_ops.init and EEPROM access + * we should init now + */ + spin_lock_init(&il->reg_lock); + spin_lock_init(&il->lock); + + /* + * stop and reset the on-board processor just in case it is in a + * strange state ... like being left stranded by a primary kernel + * and this is now the kdump kernel trying to start up + */ + _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); + + il4965_hw_detect(il); + IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev); + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + + il4965_prepare_card_hw(il); + if (!il->hw_ready) { + IL_WARN("Failed, HW not ready\n"); + err = -EIO; + goto out_iounmap; + } + + /***************** + * 4. Read EEPROM + *****************/ + /* Read the EEPROM */ + err = il_eeprom_init(il); + if (err) { + IL_ERR("Unable to init EEPROM\n"); + goto out_iounmap; + } + err = il4965_eeprom_check_version(il); + if (err) + goto out_free_eeprom; + + /* extract MAC Address */ + il4965_eeprom_get_mac(il, il->addresses[0].addr); + D_INFO("MAC address: %pM\n", il->addresses[0].addr); + il->hw->wiphy->addresses = il->addresses; + il->hw->wiphy->n_addresses = 1; + + /************************ + * 5. Setup HW constants + ************************/ + il4965_set_hw_params(il); + + /******************* + * 6. Setup il + *******************/ + + err = il4965_init_drv(il); + if (err) + goto out_free_eeprom; + /* At this point both hw and il are initialized. */ + + /******************** + * 7. Setup services + ********************/ + spin_lock_irqsave(&il->lock, flags); + il_disable_interrupts(il); + spin_unlock_irqrestore(&il->lock, flags); + + pci_enable_msi(il->pci_dev); + + err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); + if (err) { + IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); + goto out_disable_msi; + } + + il4965_setup_deferred_work(il); + il4965_setup_handlers(il); + + /********************************************* + * 8. Enable interrupts and read RFKILL state + *********************************************/ + + /* enable rfkill interrupt: hw bug w/a */ + pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd); + if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { + pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd); + } + + il_enable_rfkill_int(il); + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(S_RFKILL, &il->status); + else + set_bit(S_RFKILL, &il->status); + + wiphy_rfkill_set_hw_state(il->hw->wiphy, + test_bit(S_RFKILL, &il->status)); + + il_power_initialize(il); + + init_completion(&il->_4965.firmware_loading_complete); + + err = il4965_request_firmware(il, true); + if (err) + goto out_destroy_workqueue; + + return 0; + +out_destroy_workqueue: + destroy_workqueue(il->workqueue); + il->workqueue = NULL; + free_irq(il->pci_dev->irq, il); +out_disable_msi: + pci_disable_msi(il->pci_dev); + il4965_uninit_drv(il); +out_free_eeprom: + il_eeprom_free(il); +out_iounmap: + iounmap(il->hw_base); +out_pci_release_regions: + pci_release_regions(pdev); +out_pci_disable_device: + pci_disable_device(pdev); +out_ieee80211_free_hw: + ieee80211_free_hw(il->hw); +out: + return err; +} + +static void +il4965_pci_remove(struct pci_dev *pdev) +{ + struct il_priv *il = pci_get_drvdata(pdev); + unsigned long flags; + + if (!il) + return; + + wait_for_completion(&il->_4965.firmware_loading_complete); + + D_INFO("*** UNLOAD DRIVER ***\n"); + + il_dbgfs_unregister(il); + sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group); + + /* ieee80211_unregister_hw call wil cause il_mac_stop to + * to be called and il4965_down since we are removing the device + * we need to set S_EXIT_PENDING bit. + */ + set_bit(S_EXIT_PENDING, &il->status); + + il_leds_exit(il); + + if (il->mac80211_registered) { + ieee80211_unregister_hw(il->hw); + il->mac80211_registered = 0; + } else { + il4965_down(il); + } + + /* + * Make sure device is reset to low power before unloading driver. + * This may be redundant with il4965_down(), but there are paths to + * run il4965_down() without calling apm_ops.stop(), and there are + * paths to avoid running il4965_down() at all before leaving driver. + * This (inexpensive) call *makes sure* device is reset. + */ + il_apm_stop(il); + + /* make sure we flush any pending irq or + * tasklet for the driver + */ + spin_lock_irqsave(&il->lock, flags); + il_disable_interrupts(il); + spin_unlock_irqrestore(&il->lock, flags); + + il4965_synchronize_irq(il); + + il4965_dealloc_ucode_pci(il); + + if (il->rxq.bd) + il4965_rx_queue_free(il, &il->rxq); + il4965_hw_txq_ctx_free(il); + + il_eeprom_free(il); + + /*netif_stop_queue(dev); */ + flush_workqueue(il->workqueue); + + /* ieee80211_unregister_hw calls il_mac_stop, which flushes + * il->workqueue... so we can't take down the workqueue + * until now... */ + destroy_workqueue(il->workqueue); + il->workqueue = NULL; + + free_irq(il->pci_dev->irq, il); + pci_disable_msi(il->pci_dev); + iounmap(il->hw_base); + pci_release_regions(pdev); + pci_disable_device(pdev); + + il4965_uninit_drv(il); + + dev_kfree_skb(il->beacon_skb); + + ieee80211_free_hw(il->hw); +} + +/* + * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask + * must be called under il->lock and mac access + */ +void +il4965_txq_set_sched(struct il_priv *il, u32 mask) +{ + il_wr_prph(il, IL49_SCD_TXFACT, mask); +} + +/***************************************************************************** + * + * driver and module entry point + * + *****************************************************************************/ + +/* Hardware specific file defines the PCI IDs table for that hardware module */ +static const struct pci_device_id il4965_hw_card_ids[] = { + {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)}, + {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)}, + {0} +}; +MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids); + +static struct pci_driver il4965_driver = { + .name = DRV_NAME, + .id_table = il4965_hw_card_ids, + .probe = il4965_pci_probe, + .remove = il4965_pci_remove, + .driver.pm = IL_LEGACY_PM_OPS, +}; + +static int __init +il4965_init(void) +{ + + int ret; + pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); + pr_info(DRV_COPYRIGHT "\n"); + + ret = il4965_rate_control_register(); + if (ret) { + pr_err("Unable to register rate control algorithm: %d\n", ret); + return ret; + } + + ret = pci_register_driver(&il4965_driver); + if (ret) { + pr_err("Unable to initialize PCI module\n"); + goto error_register; + } + + return ret; + +error_register: + il4965_rate_control_unregister(); + return ret; +} + +static void __exit +il4965_exit(void) +{ + pci_unregister_driver(&il4965_driver); + il4965_rate_control_unregister(); +} + +module_exit(il4965_exit); +module_init(il4965_init); + +#ifdef CONFIG_IWLEGACY_DEBUG +module_param_named(debug, il_debug_level, uint, 0644); +MODULE_PARM_DESC(debug, "debug output mask"); +#endif + +module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, 0444); +MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); +module_param_named(queues_num, il4965_mod_params.num_of_queues, int, 0444); +MODULE_PARM_DESC(queues_num, "number of hw queues."); +module_param_named(11n_disable, il4965_mod_params.disable_11n, int, 0444); +MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); +module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, 0444); +MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])"); +module_param_named(fw_restart, il4965_mod_params.restart_fw, int, 0444); +MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); |