summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intersil/orinoco/hermes_dld.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intersil/orinoco/hermes_dld.c')
-rw-r--r--drivers/net/wireless/intersil/orinoco/hermes_dld.c477
1 files changed, 477 insertions, 0 deletions
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.c b/drivers/net/wireless/intersil/orinoco/hermes_dld.c
new file mode 100644
index 000000000..4a10b7aca
--- /dev/null
+++ b/drivers/net/wireless/intersil/orinoco/hermes_dld.c
@@ -0,0 +1,477 @@
+/*
+ * Hermes download helper.
+ *
+ * This helper:
+ * - is capable of writing to the volatile area of the hermes device
+ * - is currently not capable of writing to non-volatile areas
+ * - provide helpers to identify and update plugin data
+ * - is not capable of interpreting a fw image directly. That is up to
+ * the main card driver.
+ * - deals with Hermes I devices. It can probably be modified to deal
+ * with Hermes II devices
+ *
+ * Copyright (C) 2007, David Kilroy
+ *
+ * Plug data code slightly modified from spectrum_cs driver
+ * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
+ * Portions based on information in wl_lkm_718 Agere driver
+ * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include "hermes.h"
+#include "hermes_dld.h"
+
+#define PFX "hermes_dld: "
+
+/* End markers used in dblocks */
+#define PDI_END 0x00000000 /* End of PDA */
+#define BLOCK_END 0xFFFFFFFF /* Last image block */
+#define TEXT_END 0x1A /* End of text header */
+
+/*
+ * The following structures have little-endian fields denoted by
+ * the leading underscore. Don't access them directly - use inline
+ * functions defined below.
+ */
+
+/*
+ * The binary image to be downloaded consists of series of data blocks.
+ * Each block has the following structure.
+ */
+struct dblock {
+ __le32 addr; /* adapter address where to write the block */
+ __le16 len; /* length of the data only, in bytes */
+ char data[0]; /* data to be written */
+} __packed;
+
+/*
+ * Plug Data References are located in the image after the last data
+ * block. They refer to areas in the adapter memory where the plug data
+ * items with matching ID should be written.
+ */
+struct pdr {
+ __le32 id; /* record ID */
+ __le32 addr; /* adapter address where to write the data */
+ __le32 len; /* expected length of the data, in bytes */
+ char next[0]; /* next PDR starts here */
+} __packed;
+
+/*
+ * Plug Data Items are located in the EEPROM read from the adapter by
+ * primary firmware. They refer to the device-specific data that should
+ * be plugged into the secondary firmware.
+ */
+struct pdi {
+ __le16 len; /* length of ID and data, in words */
+ __le16 id; /* record ID */
+ char data[0]; /* plug data */
+} __packed;
+
+/*** FW data block access functions ***/
+
+static inline u32
+dblock_addr(const struct dblock *blk)
+{
+ return le32_to_cpu(blk->addr);
+}
+
+static inline u32
+dblock_len(const struct dblock *blk)
+{
+ return le16_to_cpu(blk->len);
+}
+
+/*** PDR Access functions ***/
+
+static inline u32
+pdr_id(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->id);
+}
+
+static inline u32
+pdr_addr(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->addr);
+}
+
+static inline u32
+pdr_len(const struct pdr *pdr)
+{
+ return le32_to_cpu(pdr->len);
+}
+
+/*** PDI Access functions ***/
+
+static inline u32
+pdi_id(const struct pdi *pdi)
+{
+ return le16_to_cpu(pdi->id);
+}
+
+/* Return length of the data only, in bytes */
+static inline u32
+pdi_len(const struct pdi *pdi)
+{
+ return 2 * (le16_to_cpu(pdi->len) - 1);
+}
+
+/*** Plug Data Functions ***/
+
+/*
+ * Scan PDR for the record with the specified RECORD_ID.
+ * If it's not found, return NULL.
+ */
+static const struct pdr *
+hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end)
+{
+ const struct pdr *pdr = first_pdr;
+
+ end -= sizeof(struct pdr);
+
+ while (((void *) pdr <= end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ return NULL;
+
+ /* If the record ID matches, we are done */
+ if (pdr_id(pdr) == record_id)
+ return pdr;
+
+ pdr = (struct pdr *) pdr->next;
+ }
+ return NULL;
+}
+
+/* Scan production data items for a particular entry */
+static const struct pdi *
+hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end)
+{
+ const struct pdi *pdi = first_pdi;
+
+ end -= sizeof(struct pdi);
+
+ while (((void *) pdi <= end) &&
+ (pdi_id(pdi) != PDI_END)) {
+
+ /* If the record ID matches, we are done */
+ if (pdi_id(pdi) == record_id)
+ return pdi;
+
+ pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return NULL;
+}
+
+/* Process one Plug Data Item - find corresponding PDR and plug it */
+static int
+hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr,
+ const struct pdi *pdi, const void *pdr_end)
+{
+ const struct pdr *pdr;
+
+ /* Find the PDR corresponding to this PDI */
+ pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end);
+
+ /* No match is found, safe to ignore */
+ if (!pdr)
+ return 0;
+
+ /* Lengths of the data in PDI and PDR must match */
+ if (pdi_len(pdi) != pdr_len(pdr))
+ return -EINVAL;
+
+ /* do the actual plugging */
+ hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
+
+ return 0;
+}
+
+/* Parse PDA and write the records into the adapter
+ *
+ * Attempt to write every records that is in the specified pda
+ * which also has a valid production data record for the firmware.
+ */
+int hermes_apply_pda(struct hermes *hw,
+ const char *first_pdr,
+ const void *pdr_end,
+ const __le16 *pda,
+ const void *pda_end)
+{
+ int ret;
+ const struct pdi *pdi;
+ const struct pdr *pdr;
+
+ pdr = (const struct pdr *) first_pdr;
+ pda_end -= sizeof(struct pdi);
+
+ /* Go through every PDI and plug them into the adapter */
+ pdi = (const struct pdi *) (pda + 2);
+ while (((void *) pdi <= pda_end) &&
+ (pdi_id(pdi) != PDI_END)) {
+ ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end);
+ if (ret)
+ return ret;
+
+ /* Increment to the next PDI */
+ pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return 0;
+}
+
+/* Identify the total number of bytes in all blocks
+ * including the header data.
+ */
+size_t
+hermes_blocks_length(const char *first_block, const void *end)
+{
+ const struct dblock *blk = (const struct dblock *) first_block;
+ int total_len = 0;
+ int len;
+
+ end -= sizeof(*blk);
+
+ /* Skip all blocks to locate Plug Data References
+ * (Spectrum CS) */
+ while (((void *) blk <= end) &&
+ (dblock_addr(blk) != BLOCK_END)) {
+ len = dblock_len(blk);
+ total_len += sizeof(*blk) + len;
+ blk = (struct dblock *) &blk->data[len];
+ }
+
+ return total_len;
+}
+
+/*** Hermes programming ***/
+
+/* Program the data blocks */
+int hermes_program(struct hermes *hw, const char *first_block, const void *end)
+{
+ const struct dblock *blk;
+ u32 blkaddr;
+ u32 blklen;
+ int err = 0;
+
+ blk = (const struct dblock *) first_block;
+
+ if ((void *) blk > (end - sizeof(*blk)))
+ return -EIO;
+
+ blkaddr = dblock_addr(blk);
+ blklen = dblock_len(blk);
+
+ while ((blkaddr != BLOCK_END) &&
+ (((void *) blk + blklen) <= end)) {
+ pr_debug(PFX "Programming block of length %d "
+ "to address 0x%08x\n", blklen, blkaddr);
+
+ err = hw->ops->program(hw, blk->data, blkaddr, blklen);
+ if (err)
+ break;
+
+ blk = (const struct dblock *) &blk->data[blklen];
+
+ if ((void *) blk > (end - sizeof(*blk)))
+ return -EIO;
+
+ blkaddr = dblock_addr(blk);
+ blklen = dblock_len(blk);
+ }
+ return err;
+}
+
+/*** Default plugging data for Hermes I ***/
+/* Values from wl_lkm_718/hcf/dhf.c */
+
+#define DEFINE_DEFAULT_PDR(pid, length, data) \
+static const struct { \
+ __le16 len; \
+ __le16 id; \
+ u8 val[length]; \
+} __packed default_pdr_data_##pid = { \
+ cpu_to_le16((sizeof(default_pdr_data_##pid)/ \
+ sizeof(__le16)) - 1), \
+ cpu_to_le16(pid), \
+ data \
+}
+
+#define DEFAULT_PDR(pid) default_pdr_data_##pid
+
+/* HWIF Compatibility */
+DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
+
+/* PPPPSign */
+DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
+
+/* PPPPProf */
+DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
+
+/* Antenna diversity */
+DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
+
+/* Modem VCO band Set-up */
+DEFINE_DEFAULT_PDR(0x0160, 28,
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00");
+
+/* Modem Rx Gain Table Values */
+DEFINE_DEFAULT_PDR(0x0161, 256,
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
+ "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
+ "\x3B\x01\x3A\01\x3A\x01\x39\x01"
+ "\x39\x01\x38\01\x38\x01\x37\x01"
+ "\x37\x01\x36\01\x36\x01\x35\x01"
+ "\x35\x01\x34\01\x34\x01\x33\x01"
+ "\x33\x01\x32\x01\x32\x01\x31\x01"
+ "\x31\x01\x30\x01\x30\x01\x7B\x01"
+ "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
+ "\x79\x01\x78\x01\x78\x01\x77\x01"
+ "\x77\x01\x76\x01\x76\x01\x75\x01"
+ "\x75\x01\x74\x01\x74\x01\x73\x01"
+ "\x73\x01\x72\x01\x72\x01\x71\x01"
+ "\x71\x01\x70\x01\x70\x01\x68\x01"
+ "\x68\x01\x67\x01\x67\x01\x66\x01"
+ "\x66\x01\x65\x01\x65\x01\x57\x01"
+ "\x57\x01\x56\x01\x56\x01\x55\x01"
+ "\x55\x01\x54\x01\x54\x01\x53\x01"
+ "\x53\x01\x52\x01\x52\x01\x51\x01"
+ "\x51\x01\x50\x01\x50\x01\x48\x01"
+ "\x48\x01\x47\x01\x47\x01\x46\x01"
+ "\x46\x01\x45\x01\x45\x01\x44\x01"
+ "\x44\x01\x43\x01\x43\x01\x42\x01"
+ "\x42\x01\x41\x01\x41\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01");
+
+/* Write PDA according to certain rules.
+ *
+ * For every production data record, look for a previous setting in
+ * the pda, and use that.
+ *
+ * For certain records, use defaults if they are not found in pda.
+ */
+int hermes_apply_pda_with_defaults(struct hermes *hw,
+ const char *first_pdr,
+ const void *pdr_end,
+ const __le16 *pda,
+ const void *pda_end)
+{
+ const struct pdr *pdr = (const struct pdr *) first_pdr;
+ const struct pdi *first_pdi = (const struct pdi *) &pda[2];
+ const struct pdi *pdi;
+ const struct pdi *default_pdi = NULL;
+ const struct pdi *outdoor_pdi;
+ int record_id;
+
+ pdr_end -= sizeof(struct pdr);
+
+ while (((void *) pdr <= pdr_end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * For spectrum_cs firmwares,
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ break;
+ record_id = pdr_id(pdr);
+
+ pdi = hermes_find_pdi(first_pdi, record_id, pda_end);
+ if (pdi)
+ pr_debug(PFX "Found record 0x%04x at %p\n",
+ record_id, pdi);
+
+ switch (record_id) {
+ case 0x110: /* Modem REFDAC values */
+ case 0x120: /* Modem VGDAC values */
+ outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1,
+ pda_end);
+ default_pdi = NULL;
+ if (outdoor_pdi) {
+ pdi = outdoor_pdi;
+ pr_debug(PFX
+ "Using outdoor record 0x%04x at %p\n",
+ record_id + 1, pdi);
+ }
+ break;
+ case 0x5: /* HWIF Compatibility */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
+ break;
+ case 0x108: /* PPPPSign */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
+ break;
+ case 0x109: /* PPPPProf */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
+ break;
+ case 0x150: /* Antenna diversity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
+ break;
+ case 0x160: /* Modem VCO band Set-up */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
+ break;
+ case 0x161: /* Modem Rx Gain Table Values */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
+ break;
+ default:
+ default_pdi = NULL;
+ break;
+ }
+ if (!pdi && default_pdi) {
+ /* Use default */
+ pdi = default_pdi;
+ pr_debug(PFX "Using default record 0x%04x at %p\n",
+ record_id, pdi);
+ }
+
+ if (pdi) {
+ /* Lengths of the data in PDI and PDR must match */
+ if ((pdi_len(pdi) == pdr_len(pdr)) &&
+ ((void *) pdi->data + pdi_len(pdi) < pda_end)) {
+ /* do the actual plugging */
+ hw->ops->program(hw, pdi->data, pdr_addr(pdr),
+ pdi_len(pdi));
+ }
+ }
+
+ pdr++;
+ }
+ return 0;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:38:59 +0000