diff options
Diffstat (limited to 'drivers/net/wireless/marvell/libertas/cfg.c')
| -rw-r--r-- | drivers/net/wireless/marvell/libertas/cfg.c | 2167 |
1 files changed, 2167 insertions, 0 deletions
diff --git a/drivers/net/wireless/marvell/libertas/cfg.c b/drivers/net/wireless/marvell/libertas/cfg.c new file mode 100644 index 000000000..4e3de6849 --- /dev/null +++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -0,0 +1,2167 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Implement cfg80211 ("iw") support. + * + * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany + * Holger Schurig <hs4233@mail.mn-solutions.de> + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/hardirq.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/slab.h> +#include <linux/ieee80211.h> +#include <net/cfg80211.h> +#include <asm/unaligned.h> + +#include "decl.h" +#include "cfg.h" +#include "cmd.h" +#include "mesh.h" + + +#define CHAN2G(_channel, _freq, _flags) { \ + .band = NL80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_channel), \ + .flags = (_flags), \ + .max_antenna_gain = 0, \ + .max_power = 30, \ +} + +static struct ieee80211_channel lbs_2ghz_channels[] = { + CHAN2G(1, 2412, 0), + CHAN2G(2, 2417, 0), + CHAN2G(3, 2422, 0), + CHAN2G(4, 2427, 0), + CHAN2G(5, 2432, 0), + CHAN2G(6, 2437, 0), + CHAN2G(7, 2442, 0), + CHAN2G(8, 2447, 0), + CHAN2G(9, 2452, 0), + CHAN2G(10, 2457, 0), + CHAN2G(11, 2462, 0), + CHAN2G(12, 2467, 0), + CHAN2G(13, 2472, 0), + CHAN2G(14, 2484, 0), +}; + +#define RATETAB_ENT(_rate, _hw_value, _flags) { \ + .bitrate = (_rate), \ + .hw_value = (_hw_value), \ + .flags = (_flags), \ +} + + +/* Table 6 in section 3.2.1.1 */ +static struct ieee80211_rate lbs_rates[] = { + RATETAB_ENT(10, 0, 0), + RATETAB_ENT(20, 1, 0), + RATETAB_ENT(55, 2, 0), + RATETAB_ENT(110, 3, 0), + RATETAB_ENT(60, 9, 0), + RATETAB_ENT(90, 6, 0), + RATETAB_ENT(120, 7, 0), + RATETAB_ENT(180, 8, 0), + RATETAB_ENT(240, 9, 0), + RATETAB_ENT(360, 10, 0), + RATETAB_ENT(480, 11, 0), + RATETAB_ENT(540, 12, 0), +}; + +static struct ieee80211_supported_band lbs_band_2ghz = { + .channels = lbs_2ghz_channels, + .n_channels = ARRAY_SIZE(lbs_2ghz_channels), + .bitrates = lbs_rates, + .n_bitrates = ARRAY_SIZE(lbs_rates), +}; + + +static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, +}; + +/* Time to stay on the channel */ +#define LBS_DWELL_PASSIVE 100 +#define LBS_DWELL_ACTIVE 40 + + +/*************************************************************************** + * Misc utility functions + * + * TLVs are Marvell specific. They are very similar to IEs, they have the + * same structure: type, length, data*. The only difference: for IEs, the + * type and length are u8, but for TLVs they're __le16. + */ + +/* + * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 + * in the firmware spec + */ +static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type) +{ + int ret = -ENOTSUPP; + + switch (auth_type) { + case NL80211_AUTHTYPE_OPEN_SYSTEM: + case NL80211_AUTHTYPE_SHARED_KEY: + ret = auth_type; + break; + case NL80211_AUTHTYPE_AUTOMATIC: + ret = NL80211_AUTHTYPE_OPEN_SYSTEM; + break; + case NL80211_AUTHTYPE_NETWORK_EAP: + ret = 0x80; + break; + default: + /* silence compiler */ + break; + } + return ret; +} + + +/* + * Various firmware commands need the list of supported rates, but with + * the hight-bit set for basic rates + */ +static int lbs_add_rates(u8 *rates) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { + u8 rate = lbs_rates[i].bitrate / 5; + if (rate == 0x02 || rate == 0x04 || + rate == 0x0b || rate == 0x16) + rate |= 0x80; + rates[i] = rate; + } + return ARRAY_SIZE(lbs_rates); +} + + +/*************************************************************************** + * TLV utility functions + * + * TLVs are Marvell specific. They are very similar to IEs, they have the + * same structure: type, length, data*. The only difference: for IEs, the + * type and length are u8, but for TLVs they're __le16. + */ + + +/* + * Add ssid TLV + */ +#define LBS_MAX_SSID_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + IEEE80211_MAX_SSID_LEN) + +static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) +{ + struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; + + /* + * TLV-ID SSID 00 00 + * length 06 00 + * ssid 4d 4e 54 45 53 54 + */ + ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); + ssid_tlv->header.len = cpu_to_le16(ssid_len); + memcpy(ssid_tlv->ssid, ssid, ssid_len); + return sizeof(ssid_tlv->header) + ssid_len; +} + + +/* + * Add channel list TLV (section 8.4.2) + * + * Actual channel data comes from priv->wdev->wiphy->channels. + */ +#define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) + +static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, + int last_channel, int active_scan) +{ + int chanscanparamsize = sizeof(struct chanscanparamset) * + (last_channel - priv->scan_channel); + + struct mrvl_ie_header *header = (void *) tlv; + + /* + * TLV-ID CHANLIST 01 01 + * length 0e 00 + * channel 00 01 00 00 00 64 00 + * radio type 00 + * channel 01 + * scan type 00 + * min scan time 00 00 + * max scan time 64 00 + * channel 2 00 02 00 00 00 64 00 + * + */ + + header->type = cpu_to_le16(TLV_TYPE_CHANLIST); + header->len = cpu_to_le16(chanscanparamsize); + tlv += sizeof(struct mrvl_ie_header); + + /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, + last_channel); */ + memset(tlv, 0, chanscanparamsize); + + while (priv->scan_channel < last_channel) { + struct chanscanparamset *param = (void *) tlv; + + param->radiotype = CMD_SCAN_RADIO_TYPE_BG; + param->channumber = + priv->scan_req->channels[priv->scan_channel]->hw_value; + if (active_scan) { + param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); + } else { + param->chanscanmode.passivescan = 1; + param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); + } + tlv += sizeof(struct chanscanparamset); + priv->scan_channel++; + } + return sizeof(struct mrvl_ie_header) + chanscanparamsize; +} + + +/* + * Add rates TLV + * + * The rates are in lbs_bg_rates[], but for the 802.11b + * rates the high bit is set. We add this TLV only because + * there's a firmware which otherwise doesn't report all + * APs in range. + */ +#define LBS_MAX_RATES_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + (ARRAY_SIZE(lbs_rates))) + +/* Adds a TLV with all rates the hardware supports */ +static int lbs_add_supported_rates_tlv(u8 *tlv) +{ + size_t i; + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; + + /* + * TLV-ID RATES 01 00 + * length 0e 00 + * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c + */ + rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); + tlv += sizeof(rate_tlv->header); + i = lbs_add_rates(tlv); + tlv += i; + rate_tlv->header.len = cpu_to_le16(i); + return sizeof(rate_tlv->header) + i; +} + +/* Add common rates from a TLV and return the new end of the TLV */ +static u8 * +add_ie_rates(u8 *tlv, const u8 *ie, int *nrates) +{ + int hw, ap, ap_max = ie[1]; + u8 hw_rate; + + if (ap_max > MAX_RATES) { + lbs_deb_assoc("invalid rates\n"); + return tlv; + } + /* Advance past IE header */ + ie += 2; + + lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); + + for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { + hw_rate = lbs_rates[hw].bitrate / 5; + for (ap = 0; ap < ap_max; ap++) { + if (hw_rate == (ie[ap] & 0x7f)) { + *tlv++ = ie[ap]; + *nrates = *nrates + 1; + } + } + } + return tlv; +} + +/* + * Adds a TLV with all rates the hardware *and* BSS supports. + */ +static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) +{ + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; + const u8 *rates_eid, *ext_rates_eid; + int n = 0; + + rcu_read_lock(); + rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); + ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES); + + /* + * 01 00 TLV_TYPE_RATES + * 04 00 len + * 82 84 8b 96 rates + */ + rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); + tlv += sizeof(rate_tlv->header); + + /* Add basic rates */ + if (rates_eid) { + tlv = add_ie_rates(tlv, rates_eid, &n); + + /* Add extended rates, if any */ + if (ext_rates_eid) + tlv = add_ie_rates(tlv, ext_rates_eid, &n); + } else { + lbs_deb_assoc("assoc: bss had no basic rate IE\n"); + /* Fallback: add basic 802.11b rates */ + *tlv++ = 0x82; + *tlv++ = 0x84; + *tlv++ = 0x8b; + *tlv++ = 0x96; + n = 4; + } + rcu_read_unlock(); + + rate_tlv->header.len = cpu_to_le16(n); + return sizeof(rate_tlv->header) + n; +} + + +/* + * Add auth type TLV. + * + * This is only needed for newer firmware (V9 and up). + */ +#define LBS_MAX_AUTH_TYPE_TLV_SIZE \ + sizeof(struct mrvl_ie_auth_type) + +static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) +{ + struct mrvl_ie_auth_type *auth = (void *) tlv; + + /* + * 1f 01 TLV_TYPE_AUTH_TYPE + * 01 00 len + * 01 auth type + */ + auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); + auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); + return sizeof(*auth); +} + + +/* + * Add channel (phy ds) TLV + */ +#define LBS_MAX_CHANNEL_TLV_SIZE \ + sizeof(struct mrvl_ie_header) + +static int lbs_add_channel_tlv(u8 *tlv, u8 channel) +{ + struct mrvl_ie_ds_param_set *ds = (void *) tlv; + + /* + * 03 00 TLV_TYPE_PHY_DS + * 01 00 len + * 06 channel + */ + ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); + ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); + ds->channel = channel; + return sizeof(*ds); +} + + +/* + * Add (empty) CF param TLV of the form: + */ +#define LBS_MAX_CF_PARAM_TLV_SIZE \ + sizeof(struct mrvl_ie_header) + +static int lbs_add_cf_param_tlv(u8 *tlv) +{ + struct mrvl_ie_cf_param_set *cf = (void *)tlv; + + /* + * 04 00 TLV_TYPE_CF + * 06 00 len + * 00 cfpcnt + * 00 cfpperiod + * 00 00 cfpmaxduration + * 00 00 cfpdurationremaining + */ + cf->header.type = cpu_to_le16(TLV_TYPE_CF); + cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); + return sizeof(*cf); +} + +/* + * Add WPA TLV + */ +#define LBS_MAX_WPA_TLV_SIZE \ + (sizeof(struct mrvl_ie_header) \ + + 128 /* TODO: I guessed the size */) + +static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) +{ + size_t tlv_len; + + /* + * We need just convert an IE to an TLV. IEs use u8 for the header, + * u8 type + * u8 len + * u8[] data + * but TLVs use __le16 instead: + * __le16 type + * __le16 len + * u8[] data + */ + *tlv++ = *ie++; + *tlv++ = 0; + tlv_len = *tlv++ = *ie++; + *tlv++ = 0; + while (tlv_len--) + *tlv++ = *ie++; + /* the TLV is two bytes larger than the IE */ + return ie_len + 2; +} + +/* + * Set Channel + */ + +static int lbs_cfg_set_monitor_channel(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = -ENOTSUPP; + + if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) + goto out; + + ret = lbs_set_channel(priv, chandef->chan->hw_value); + + out: + return ret; +} + +static int lbs_cfg_set_mesh_channel(struct wiphy *wiphy, + struct net_device *netdev, + struct ieee80211_channel *channel) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = -ENOTSUPP; + + if (netdev != priv->mesh_dev) + goto out; + + ret = lbs_mesh_set_channel(priv, channel->hw_value); + + out: + return ret; +} + + + +/* + * Scanning + */ + +/* + * When scanning, the firmware doesn't send a nul packet with the power-safe + * bit to the AP. So we cannot stay away from our current channel too long, + * otherwise we loose data. So take a "nap" while scanning every other + * while. + */ +#define LBS_SCAN_BEFORE_NAP 4 + + +/* + * When the firmware reports back a scan-result, it gives us an "u8 rssi", + * which isn't really an RSSI, as it becomes larger when moving away from + * the AP. Anyway, we need to convert that into mBm. + */ +#define LBS_SCAN_RSSI_TO_MBM(rssi) \ + ((-(int)rssi + 3)*100) + +static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, + struct cmd_header *resp) +{ + struct cfg80211_bss *bss; + struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; + int bsssize; + const u8 *pos; + const u8 *tsfdesc; + int tsfsize; + int i; + int ret = -EILSEQ; + + bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); + + lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n", + scanresp->nr_sets, bsssize, le16_to_cpu(resp->size)); + + if (scanresp->nr_sets == 0) { + ret = 0; + goto done; + } + + /* + * The general layout of the scan response is described in chapter + * 5.7.1. Basically we have a common part, then any number of BSS + * descriptor sections. Finally we have section with the same number + * of TSFs. + * + * cmd_ds_802_11_scan_rsp + * cmd_header + * pos_size + * nr_sets + * bssdesc 1 + * bssid + * rssi + * timestamp + * intvl + * capa + * IEs + * bssdesc 2 + * bssdesc n + * MrvlIEtypes_TsfFimestamp_t + * TSF for BSS 1 + * TSF for BSS 2 + * TSF for BSS n + */ + + pos = scanresp->bssdesc_and_tlvbuffer; + + lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer, + scanresp->bssdescriptsize); + + tsfdesc = pos + bsssize; + tsfsize = 4 + 8 * scanresp->nr_sets; + lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize); + + /* Validity check: we expect a Marvell-Local TLV */ + i = get_unaligned_le16(tsfdesc); + tsfdesc += 2; + if (i != TLV_TYPE_TSFTIMESTAMP) { + lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i); + goto done; + } + + /* + * Validity check: the TLV holds TSF values with 8 bytes each, so + * the size in the TLV must match the nr_sets value + */ + i = get_unaligned_le16(tsfdesc); + tsfdesc += 2; + if (i / 8 != scanresp->nr_sets) { + lbs_deb_scan("scan response: invalid number of TSF timestamp " + "sets (expected %d got %d)\n", scanresp->nr_sets, + i / 8); + goto done; + } + + for (i = 0; i < scanresp->nr_sets; i++) { + const u8 *bssid; + const u8 *ie; + int left; + int ielen; + int rssi; + u16 intvl; + u16 capa; + int chan_no = -1; + const u8 *ssid = NULL; + u8 ssid_len = 0; + + int len = get_unaligned_le16(pos); + pos += 2; + + /* BSSID */ + bssid = pos; + pos += ETH_ALEN; + /* RSSI */ + rssi = *pos++; + /* Packet time stamp */ + pos += 8; + /* Beacon interval */ + intvl = get_unaligned_le16(pos); + pos += 2; + /* Capabilities */ + capa = get_unaligned_le16(pos); + pos += 2; + + /* To find out the channel, we must parse the IEs */ + ie = pos; + /* + * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon + * interval, capabilities + */ + ielen = left = len - (6 + 1 + 8 + 2 + 2); + while (left >= 2) { + u8 id, elen; + id = *pos++; + elen = *pos++; + left -= 2; + if (elen > left) { + lbs_deb_scan("scan response: invalid IE fmt\n"); + goto done; + } + + if (id == WLAN_EID_DS_PARAMS) + chan_no = *pos; + if (id == WLAN_EID_SSID) { + ssid = pos; + ssid_len = elen; + } + left -= elen; + pos += elen; + } + + /* No channel, no luck */ + if (chan_no != -1) { + struct wiphy *wiphy = priv->wdev->wiphy; + int freq = ieee80211_channel_to_frequency(chan_no, + NL80211_BAND_2GHZ); + struct ieee80211_channel *channel = + ieee80211_get_channel(wiphy, freq); + + lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %*pE, %d dBm\n", + bssid, capa, chan_no, ssid_len, ssid, + LBS_SCAN_RSSI_TO_MBM(rssi)/100); + + if (channel && + !(channel->flags & IEEE80211_CHAN_DISABLED)) { + bss = cfg80211_inform_bss(wiphy, channel, + CFG80211_BSS_FTYPE_UNKNOWN, + bssid, get_unaligned_le64(tsfdesc), + capa, intvl, ie, ielen, + LBS_SCAN_RSSI_TO_MBM(rssi), + GFP_KERNEL); + cfg80211_put_bss(wiphy, bss); + } + } else + lbs_deb_scan("scan response: missing BSS channel IE\n"); + + tsfdesc += 8; + } + ret = 0; + + done: + return ret; +} + + +/* + * Our scan command contains a TLV, consting of a SSID TLV, a channel list + * TLV and a rates TLV. Determine the maximum size of them: + */ +#define LBS_SCAN_MAX_CMD_SIZE \ + (sizeof(struct cmd_ds_802_11_scan) \ + + LBS_MAX_SSID_TLV_SIZE \ + + LBS_MAX_CHANNEL_LIST_TLV_SIZE \ + + LBS_MAX_RATES_TLV_SIZE) + +/* + * Assumes priv->scan_req is initialized and valid + * Assumes priv->scan_channel is initialized + */ +static void lbs_scan_worker(struct work_struct *work) +{ + struct lbs_private *priv = + container_of(work, struct lbs_private, scan_work.work); + struct cmd_ds_802_11_scan *scan_cmd; + u8 *tlv; /* pointer into our current, growing TLV storage area */ + int last_channel; + int running, carrier; + + scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL); + if (scan_cmd == NULL) + return; + + /* prepare fixed part of scan command */ + scan_cmd->bsstype = CMD_BSS_TYPE_ANY; + + /* stop network while we're away from our main channel */ + running = !netif_queue_stopped(priv->dev); + carrier = netif_carrier_ok(priv->dev); + if (running) + netif_stop_queue(priv->dev); + if (carrier) + netif_carrier_off(priv->dev); + + /* prepare fixed part of scan command */ + tlv = scan_cmd->tlvbuffer; + + /* add SSID TLV */ + if (priv->scan_req->n_ssids && priv->scan_req->ssids[0].ssid_len > 0) + tlv += lbs_add_ssid_tlv(tlv, + priv->scan_req->ssids[0].ssid, + priv->scan_req->ssids[0].ssid_len); + + /* add channel TLVs */ + last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP; + if (last_channel > priv->scan_req->n_channels) + last_channel = priv->scan_req->n_channels; + tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel, + priv->scan_req->n_ssids); + + /* add rates TLV */ + tlv += lbs_add_supported_rates_tlv(tlv); + + if (priv->scan_channel < priv->scan_req->n_channels) { + cancel_delayed_work(&priv->scan_work); + if (netif_running(priv->dev)) + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(300)); + } + + /* This is the final data we are about to send */ + scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd); + lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, + sizeof(*scan_cmd)); + lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, + tlv - scan_cmd->tlvbuffer); + + __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr, + le16_to_cpu(scan_cmd->hdr.size), + lbs_ret_scan, 0); + + if (priv->scan_channel >= priv->scan_req->n_channels) { + /* Mark scan done */ + cancel_delayed_work(&priv->scan_work); + lbs_scan_done(priv); + } + + /* Restart network */ + if (carrier) + netif_carrier_on(priv->dev); + if (running && !priv->tx_pending_len) + netif_wake_queue(priv->dev); + + kfree(scan_cmd); + + /* Wake up anything waiting on scan completion */ + if (priv->scan_req == NULL) { + lbs_deb_scan("scan: waking up waiters\n"); + wake_up_all(&priv->scan_q); + } +} + +static void _internal_start_scan(struct lbs_private *priv, bool internal, + struct cfg80211_scan_request *request) +{ + lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", + request->n_ssids, request->n_channels, request->ie_len); + + priv->scan_channel = 0; + priv->scan_req = request; + priv->internal_scan = internal; + + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(50)); +} + +/* + * Clean up priv->scan_req. Should be used to handle the allocation details. + */ +void lbs_scan_done(struct lbs_private *priv) +{ + WARN_ON(!priv->scan_req); + + if (priv->internal_scan) { + kfree(priv->scan_req); + } else { + struct cfg80211_scan_info info = { + .aborted = false, + }; + + cfg80211_scan_done(priv->scan_req, &info); + } + + priv->scan_req = NULL; +} + +static int lbs_cfg_scan(struct wiphy *wiphy, + struct cfg80211_scan_request *request) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = 0; + + if (priv->scan_req || delayed_work_pending(&priv->scan_work)) { + /* old scan request not yet processed */ + ret = -EAGAIN; + goto out; + } + + _internal_start_scan(priv, false, request); + + if (priv->surpriseremoved) + ret = -EIO; + + out: + return ret; +} + + + + +/* + * Events + */ + +void lbs_send_disconnect_notification(struct lbs_private *priv, + bool locally_generated) +{ + cfg80211_disconnected(priv->dev, 0, NULL, 0, locally_generated, + GFP_KERNEL); +} + +void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) +{ + cfg80211_michael_mic_failure(priv->dev, + priv->assoc_bss, + event == MACREG_INT_CODE_MIC_ERR_MULTICAST ? + NL80211_KEYTYPE_GROUP : + NL80211_KEYTYPE_PAIRWISE, + -1, + NULL, + GFP_KERNEL); +} + + + + +/* + * Connect/disconnect + */ + + +/* + * This removes all WEP keys + */ +static int lbs_remove_wep_keys(struct lbs_private *priv) +{ + struct cmd_ds_802_11_set_wep cmd; + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.keyindex = cpu_to_le16(priv->wep_tx_key); + cmd.action = cpu_to_le16(CMD_ACT_REMOVE); + + ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); + + return ret; +} + +/* + * Set WEP keys + */ +static int lbs_set_wep_keys(struct lbs_private *priv) +{ + struct cmd_ds_802_11_set_wep cmd; + int i; + int ret; + + /* + * command 13 00 + * size 50 00 + * sequence xx xx + * result 00 00 + * action 02 00 ACT_ADD + * transmit key 00 00 + * type for key 1 01 WEP40 + * type for key 2 00 + * type for key 3 00 + * type for key 4 00 + * key 1 39 39 39 39 39 00 00 00 + * 00 00 00 00 00 00 00 00 + * key 2 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * key 3 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * key 4 00 00 00 00 00 00 00 00 + */ + if (priv->wep_key_len[0] || priv->wep_key_len[1] || + priv->wep_key_len[2] || priv->wep_key_len[3]) { + /* Only set wep keys if we have at least one of them */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.keyindex = cpu_to_le16(priv->wep_tx_key); + cmd.action = cpu_to_le16(CMD_ACT_ADD); + + for (i = 0; i < 4; i++) { + switch (priv->wep_key_len[i]) { + case WLAN_KEY_LEN_WEP40: + cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; + break; + case WLAN_KEY_LEN_WEP104: + cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; + break; + default: + cmd.keytype[i] = 0; + break; + } + memcpy(cmd.keymaterial[i], priv->wep_key[i], + priv->wep_key_len[i]); + } + + ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); + } else { + /* Otherwise remove all wep keys */ + ret = lbs_remove_wep_keys(priv); + } + + return ret; +} + + +/* + * Enable/Disable RSN status + */ +static int lbs_enable_rsn(struct lbs_private *priv, int enable) +{ + struct cmd_ds_802_11_enable_rsn cmd; + int ret; + + /* + * cmd 2f 00 + * size 0c 00 + * sequence xx xx + * result 00 00 + * action 01 00 ACT_SET + * enable 01 00 + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.enable = cpu_to_le16(enable); + + ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); + + return ret; +} + + +/* + * Set WPA/WPA key material + */ + +/* + * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we + * get rid of WEXT, this should go into host.h + */ + +struct cmd_key_material { + struct cmd_header hdr; + + __le16 action; + struct MrvlIEtype_keyParamSet param; +} __packed; + +static int lbs_set_key_material(struct lbs_private *priv, + int key_type, int key_info, + const u8 *key, u16 key_len) +{ + struct cmd_key_material cmd; + int ret; + + /* + * Example for WPA (TKIP): + * + * cmd 5e 00 + * size 34 00 + * sequence xx xx + * result 00 00 + * action 01 00 + * TLV type 00 01 key param + * length 00 26 + * key type 01 00 TKIP + * key info 06 00 UNICAST | ENABLED + * key len 20 00 + * key 32 bytes + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); + cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4); + cmd.param.keytypeid = cpu_to_le16(key_type); + cmd.param.keyinfo = cpu_to_le16(key_info); + cmd.param.keylen = cpu_to_le16(key_len); + if (key && key_len) + memcpy(cmd.param.key, key, key_len); + + ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); + + return ret; +} + + +/* + * Sets the auth type (open, shared, etc) in the firmware. That + * we use CMD_802_11_AUTHENTICATE is misleading, this firmware + * command doesn't send an authentication frame at all, it just + * stores the auth_type. + */ +static int lbs_set_authtype(struct lbs_private *priv, + struct cfg80211_connect_params *sme) +{ + struct cmd_ds_802_11_authenticate cmd; + int ret; + + /* + * cmd 11 00 + * size 19 00 + * sequence xx xx + * result 00 00 + * BSS id 00 13 19 80 da 30 + * auth type 00 + * reserved 00 00 00 00 00 00 00 00 00 00 + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + if (sme->bssid) + memcpy(cmd.bssid, sme->bssid, ETH_ALEN); + /* convert auth_type */ + ret = lbs_auth_to_authtype(sme->auth_type); + if (ret < 0) + goto done; + + cmd.authtype = ret; + ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); + + done: + return ret; +} + + +/* + * Create association request + */ +#define LBS_ASSOC_MAX_CMD_SIZE \ + (sizeof(struct cmd_ds_802_11_associate) \ + - 512 /* cmd_ds_802_11_associate.iebuf */ \ + + LBS_MAX_SSID_TLV_SIZE \ + + LBS_MAX_CHANNEL_TLV_SIZE \ + + LBS_MAX_CF_PARAM_TLV_SIZE \ + + LBS_MAX_AUTH_TYPE_TLV_SIZE \ + + LBS_MAX_WPA_TLV_SIZE) + +static int lbs_associate(struct lbs_private *priv, + struct cfg80211_bss *bss, + struct cfg80211_connect_params *sme) +{ + struct cmd_ds_802_11_associate_response *resp; + struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE, + GFP_KERNEL); + const u8 *ssid_eid; + size_t len, resp_ie_len; + int status; + int ret; + u8 *pos; + u8 *tmp; + + if (!cmd) { + ret = -ENOMEM; + goto done; + } + pos = &cmd->iebuf[0]; + + /* + * cmd 50 00 + * length 34 00 + * sequence xx xx + * result 00 00 + * BSS id 00 13 19 80 da 30 + * capabilities 11 00 + * listen interval 0a 00 + * beacon interval 00 00 + * DTIM period 00 + * TLVs xx (up to 512 bytes) + */ + cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE); + + /* Fill in static fields */ + memcpy(cmd->bssid, bss->bssid, ETH_ALEN); + cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); + cmd->capability = cpu_to_le16(bss->capability); + + /* add SSID TLV */ + rcu_read_lock(); + ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); + if (ssid_eid) + pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]); + else + lbs_deb_assoc("no SSID\n"); + rcu_read_unlock(); + + /* add DS param TLV */ + if (bss->channel) + pos += lbs_add_channel_tlv(pos, bss->channel->hw_value); + else + lbs_deb_assoc("no channel\n"); + + /* add (empty) CF param TLV */ + pos += lbs_add_cf_param_tlv(pos); + + /* add rates TLV */ + tmp = pos + 4; /* skip Marvell IE header */ + pos += lbs_add_common_rates_tlv(pos, bss); + lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp); + + /* add auth type TLV */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9) + pos += lbs_add_auth_type_tlv(pos, sme->auth_type); + + /* add WPA/WPA2 TLV */ + if (sme->ie && sme->ie_len) + pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len); + + len = (sizeof(*cmd) - sizeof(cmd->iebuf)) + + (u16)(pos - (u8 *) &cmd->iebuf); + cmd->hdr.size = cpu_to_le16(len); + + lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd, + le16_to_cpu(cmd->hdr.size)); + + /* store for later use */ + memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN); + + ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd); + if (ret) + goto done; + + /* generate connect message to cfg80211 */ + + resp = (void *) cmd; /* recast for easier field access */ + status = le16_to_cpu(resp->statuscode); + + /* Older FW versions map the IEEE 802.11 Status Code in the association + * response to the following values returned in resp->statuscode: + * + * IEEE Status Code Marvell Status Code + * 0 -> 0x0000 ASSOC_RESULT_SUCCESS + * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * others -> 0x0003 ASSOC_RESULT_REFUSED + * + * Other response codes: + * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) + * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for + * association response from the AP) + */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { + switch (status) { + case 0: + break; + case 1: + lbs_deb_assoc("invalid association parameters\n"); + status = WLAN_STATUS_CAPS_UNSUPPORTED; + break; + case 2: + lbs_deb_assoc("timer expired while waiting for AP\n"); + status = WLAN_STATUS_AUTH_TIMEOUT; + break; + case 3: + lbs_deb_assoc("association refused by AP\n"); + status = WLAN_STATUS_ASSOC_DENIED_UNSPEC; + break; + case 4: + lbs_deb_assoc("authentication refused by AP\n"); + status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; + break; + default: + lbs_deb_assoc("association failure %d\n", status); + /* v5 OLPC firmware does return the AP status code if + * it's not one of the values above. Let that through. + */ + break; + } + } + + lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, " + "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), + le16_to_cpu(resp->capability), le16_to_cpu(resp->aid)); + + resp_ie_len = le16_to_cpu(resp->hdr.size) + - sizeof(resp->hdr) + - 6; + cfg80211_connect_result(priv->dev, + priv->assoc_bss, + sme->ie, sme->ie_len, + resp->iebuf, resp_ie_len, + status, + GFP_KERNEL); + + if (status == 0) { + /* TODO: get rid of priv->connect_status */ + priv->connect_status = LBS_CONNECTED; + netif_carrier_on(priv->dev); + if (!priv->tx_pending_len) + netif_tx_wake_all_queues(priv->dev); + } + + kfree(cmd); +done: + return ret; +} + +static struct cfg80211_scan_request * +_new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme) +{ + struct cfg80211_scan_request *creq = NULL; + int i, n_channels = ieee80211_get_num_supported_channels(wiphy); + enum nl80211_band band; + + creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + + n_channels * sizeof(void *), + GFP_ATOMIC); + if (!creq) + return NULL; + + /* SSIDs come after channels */ + creq->ssids = (void *)&creq->channels[n_channels]; + creq->n_channels = n_channels; + creq->n_ssids = 1; + + /* Scan all available channels */ + i = 0; + for (band = 0; band < NUM_NL80211_BANDS; band++) { + int j; + + if (!wiphy->bands[band]) + continue; + + for (j = 0; j < wiphy->bands[band]->n_channels; j++) { + /* ignore disabled channels */ + if (wiphy->bands[band]->channels[j].flags & + IEEE80211_CHAN_DISABLED) + continue; + + creq->channels[i] = &wiphy->bands[band]->channels[j]; + i++; + } + } + if (i) { + /* Set real number of channels specified in creq->channels[] */ + creq->n_channels = i; + + /* Scan for the SSID we're going to connect to */ + memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len); + creq->ssids[0].ssid_len = sme->ssid_len; + } else { + /* No channels found... */ + kfree(creq); + creq = NULL; + } + + return creq; +} + +static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_connect_params *sme) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + struct cfg80211_bss *bss = NULL; + int ret = 0; + u8 preamble = RADIO_PREAMBLE_SHORT; + + if (dev == priv->mesh_dev) + return -EOPNOTSUPP; + + if (!sme->bssid) { + struct cfg80211_scan_request *creq; + + /* + * Scan for the requested network after waiting for existing + * scans to finish. + */ + lbs_deb_assoc("assoc: waiting for existing scans\n"); + wait_event_interruptible_timeout(priv->scan_q, + (priv->scan_req == NULL), + (15 * HZ)); + + creq = _new_connect_scan_req(wiphy, sme); + if (!creq) { + ret = -EINVAL; + goto done; + } + + lbs_deb_assoc("assoc: scanning for compatible AP\n"); + _internal_start_scan(priv, true, creq); + + lbs_deb_assoc("assoc: waiting for scan to complete\n"); + wait_event_interruptible_timeout(priv->scan_q, + (priv->scan_req == NULL), + (15 * HZ)); + lbs_deb_assoc("assoc: scanning completed\n"); + } + + /* Find the BSS we want using available scan results */ + bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, + sme->ssid, sme->ssid_len, IEEE80211_BSS_TYPE_ESS, + IEEE80211_PRIVACY_ANY); + if (!bss) { + wiphy_err(wiphy, "assoc: bss %pM not in scan results\n", + sme->bssid); + ret = -ENOENT; + goto done; + } + lbs_deb_assoc("trying %pM\n", bss->bssid); + lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", + sme->crypto.cipher_group, + sme->key_idx, sme->key_len); + + /* As this is a new connection, clear locally stored WEP keys */ + priv->wep_tx_key = 0; + memset(priv->wep_key, 0, sizeof(priv->wep_key)); + memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); + + /* set/remove WEP keys */ + switch (sme->crypto.cipher_group) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + /* Store provided WEP keys in priv-> */ + priv->wep_tx_key = sme->key_idx; + priv->wep_key_len[sme->key_idx] = sme->key_len; + memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len); + /* Set WEP keys and WEP mode */ + lbs_set_wep_keys(priv); + priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; + lbs_set_mac_control(priv); + /* No RSN mode for WEP */ + lbs_enable_rsn(priv, 0); + break; + case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */ + /* + * If we don't have no WEP, no WPA and no WPA2, + * we remove all keys like in the WPA/WPA2 setup, + * we just don't set RSN. + * + * Therefore: fall-through + */ + case WLAN_CIPHER_SUITE_TKIP: + case WLAN_CIPHER_SUITE_CCMP: + /* Remove WEP keys and WEP mode */ + lbs_remove_wep_keys(priv); + priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; + lbs_set_mac_control(priv); + + /* clear the WPA/WPA2 keys */ + lbs_set_key_material(priv, + KEY_TYPE_ID_WEP, /* doesn't matter */ + KEY_INFO_WPA_UNICAST, + NULL, 0); + lbs_set_key_material(priv, + KEY_TYPE_ID_WEP, /* doesn't matter */ + KEY_INFO_WPA_MCAST, + NULL, 0); + /* RSN mode for WPA/WPA2 */ + lbs_enable_rsn(priv, sme->crypto.cipher_group != 0); + break; + default: + wiphy_err(wiphy, "unsupported cipher group 0x%x\n", + sme->crypto.cipher_group); + ret = -ENOTSUPP; + goto done; + } + + ret = lbs_set_authtype(priv, sme); + if (ret == -ENOTSUPP) { + wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type); + goto done; + } + + lbs_set_radio(priv, preamble, 1); + + /* Do the actual association */ + ret = lbs_associate(priv, bss, sme); + + done: + if (bss) + cfg80211_put_bss(wiphy, bss); + return ret; +} + +int lbs_disconnect(struct lbs_private *priv, u16 reason) +{ + struct cmd_ds_802_11_deauthenticate cmd; + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + /* Mildly ugly to use a locally store my own BSSID ... */ + memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN); + cmd.reasoncode = cpu_to_le16(reason); + + ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd); + if (ret) + return ret; + + cfg80211_disconnected(priv->dev, + reason, + NULL, 0, true, + GFP_KERNEL); + priv->connect_status = LBS_DISCONNECTED; + + return 0; +} + +static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, + u16 reason_code) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + if (dev == priv->mesh_dev) + return -EOPNOTSUPP; + + /* store for lbs_cfg_ret_disconnect() */ + priv->disassoc_reason = reason_code; + + return lbs_disconnect(priv, reason_code); +} + +static int lbs_cfg_set_default_key(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index, bool unicast, + bool multicast) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + if (netdev == priv->mesh_dev) + return -EOPNOTSUPP; + + if (key_index != priv->wep_tx_key) { + lbs_deb_assoc("set_default_key: to %d\n", key_index); + priv->wep_tx_key = key_index; + lbs_set_wep_keys(priv); + } + + return 0; +} + + +static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev, + u8 idx, bool pairwise, const u8 *mac_addr, + struct key_params *params) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + u16 key_info; + u16 key_type; + int ret = 0; + + if (netdev == priv->mesh_dev) + return -EOPNOTSUPP; + + lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n", + params->cipher, mac_addr); + lbs_deb_assoc("add_key: key index %d, key len %d\n", + idx, params->key_len); + if (params->key_len) + lbs_deb_hex(LBS_DEB_CFG80211, "KEY", + params->key, params->key_len); + + lbs_deb_assoc("add_key: seq len %d\n", params->seq_len); + if (params->seq_len) + lbs_deb_hex(LBS_DEB_CFG80211, "SEQ", + params->seq, params->seq_len); + + switch (params->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + /* actually compare if something has changed ... */ + if ((priv->wep_key_len[idx] != params->key_len) || + memcmp(priv->wep_key[idx], + params->key, params->key_len) != 0) { + priv->wep_key_len[idx] = params->key_len; + memcpy(priv->wep_key[idx], + params->key, params->key_len); + lbs_set_wep_keys(priv); + } + break; + case WLAN_CIPHER_SUITE_TKIP: + case WLAN_CIPHER_SUITE_CCMP: + key_info = KEY_INFO_WPA_ENABLED | ((idx == 0) + ? KEY_INFO_WPA_UNICAST + : KEY_INFO_WPA_MCAST); + key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP) + ? KEY_TYPE_ID_TKIP + : KEY_TYPE_ID_AES; + lbs_set_key_material(priv, + key_type, + key_info, + params->key, params->key_len); + break; + default: + wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher); + ret = -ENOTSUPP; + break; + } + + return ret; +} + + +static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool pairwise, const u8 *mac_addr) +{ + + lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n", + key_index, mac_addr); + +#ifdef TODO + struct lbs_private *priv = wiphy_priv(wiphy); + /* + * I think can keep this a NO-OP, because: + + * - we clear all keys whenever we do lbs_cfg_connect() anyway + * - neither "iw" nor "wpa_supplicant" won't call this during + * an ongoing connection + * - TODO: but I have to check if this is still true when + * I set the AP to periodic re-keying + * - we've not kzallec() something when we've added a key at + * lbs_cfg_connect() or lbs_cfg_add_key(). + * + * This causes lbs_cfg_del_key() only called at disconnect time, + * where we'd just waste time deleting a key that is not going + * to be used anyway. + */ + if (key_index < 3 && priv->wep_key_len[key_index]) { + priv->wep_key_len[key_index] = 0; + lbs_set_wep_keys(priv); + } +#endif + + return 0; +} + + +/* + * Get station + */ + +static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, + const u8 *mac, struct station_info *sinfo) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + s8 signal, noise; + int ret; + size_t i; + + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BYTES) | + BIT_ULL(NL80211_STA_INFO_TX_PACKETS) | + BIT_ULL(NL80211_STA_INFO_RX_BYTES) | + BIT_ULL(NL80211_STA_INFO_RX_PACKETS); + sinfo->tx_bytes = priv->dev->stats.tx_bytes; + sinfo->tx_packets = priv->dev->stats.tx_packets; + sinfo->rx_bytes = priv->dev->stats.rx_bytes; + sinfo->rx_packets = priv->dev->stats.rx_packets; + + /* Get current RSSI */ + ret = lbs_get_rssi(priv, &signal, &noise); + if (ret == 0) { + sinfo->signal = signal; + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); + } + + /* Convert priv->cur_rate from hw_value to NL80211 value */ + for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { + if (priv->cur_rate == lbs_rates[i].hw_value) { + sinfo->txrate.legacy = lbs_rates[i].bitrate; + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); + break; + } + } + + return 0; +} + + + + +/* + * Change interface + */ + +static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, + enum nl80211_iftype type, + struct vif_params *params) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = 0; + + if (dev == priv->mesh_dev) + return -EOPNOTSUPP; + + switch (type) { + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + break; + default: + return -EOPNOTSUPP; + } + + if (priv->iface_running) + ret = lbs_set_iface_type(priv, type); + + if (!ret) + priv->wdev->iftype = type; + + return ret; +} + + + +/* + * IBSS (Ad-Hoc) + */ + +/* + * The firmware needs the following bits masked out of the beacon-derived + * capability field when associating/joining to a BSS: + * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) + */ +#define CAPINFO_MASK (~(0xda00)) + + +static void lbs_join_post(struct lbs_private *priv, + struct cfg80211_ibss_params *params, + u8 *bssid, u16 capability) +{ + u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */ + 2 + 4 + /* basic rates */ + 2 + 1 + /* DS parameter */ + 2 + 2 + /* atim */ + 2 + 8]; /* extended rates */ + u8 *fake = fake_ie; + struct cfg80211_bss *bss; + + /* + * For cfg80211_inform_bss, we'll need a fake IE, as we can't get + * the real IE from the firmware. So we fabricate a fake IE based on + * what the firmware actually sends (sniffed with wireshark). + */ + /* Fake SSID IE */ + *fake++ = WLAN_EID_SSID; + *fake++ = params->ssid_len; + memcpy(fake, params->ssid, params->ssid_len); + fake += params->ssid_len; + /* Fake supported basic rates IE */ + *fake++ = WLAN_EID_SUPP_RATES; + *fake++ = 4; + *fake++ = 0x82; + *fake++ = 0x84; + *fake++ = 0x8b; + *fake++ = 0x96; + /* Fake DS channel IE */ + *fake++ = WLAN_EID_DS_PARAMS; + *fake++ = 1; + *fake++ = params->chandef.chan->hw_value; + /* Fake IBSS params IE */ + *fake++ = WLAN_EID_IBSS_PARAMS; + *fake++ = 2; + *fake++ = 0; /* ATIM=0 */ + *fake++ = 0; + /* Fake extended rates IE, TODO: don't add this for 802.11b only, + * but I don't know how this could be checked */ + *fake++ = WLAN_EID_EXT_SUPP_RATES; + *fake++ = 8; + *fake++ = 0x0c; + *fake++ = 0x12; + *fake++ = 0x18; + *fake++ = 0x24; + *fake++ = 0x30; + *fake++ = 0x48; + *fake++ = 0x60; + *fake++ = 0x6c; + lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie); + + bss = cfg80211_inform_bss(priv->wdev->wiphy, + params->chandef.chan, + CFG80211_BSS_FTYPE_UNKNOWN, + bssid, + 0, + capability, + params->beacon_interval, + fake_ie, fake - fake_ie, + 0, GFP_KERNEL); + cfg80211_put_bss(priv->wdev->wiphy, bss); + + cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan, + GFP_KERNEL); + + /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ + priv->connect_status = LBS_CONNECTED; + netif_carrier_on(priv->dev); + if (!priv->tx_pending_len) + netif_wake_queue(priv->dev); +} + +static int lbs_ibss_join_existing(struct lbs_private *priv, + struct cfg80211_ibss_params *params, + struct cfg80211_bss *bss) +{ + const u8 *rates_eid; + struct cmd_ds_802_11_ad_hoc_join cmd; + u8 preamble = RADIO_PREAMBLE_SHORT; + int ret = 0; + int hw, i; + u8 rates_max; + u8 *rates; + + /* TODO: set preamble based on scan result */ + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; + + /* + * Example CMD_802_11_AD_HOC_JOIN command: + * + * command 2c 00 CMD_802_11_AD_HOC_JOIN + * size 65 00 + * sequence xx xx + * result 00 00 + * bssid 02 27 27 97 2f 96 + * ssid 49 42 53 53 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * type 02 CMD_BSS_TYPE_IBSS + * beacon period 64 00 + * dtim period 00 + * timestamp 00 00 00 00 00 00 00 00 + * localtime 00 00 00 00 00 00 00 00 + * IE DS 03 + * IE DS len 01 + * IE DS channel 01 + * reserveed 00 00 00 00 + * IE IBSS 06 + * IE IBSS len 02 + * IE IBSS atim 00 00 + * reserved 00 00 00 00 + * capability 02 00 + * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00 + * fail timeout ff 00 + * probe delay 00 00 + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + + memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN); + memcpy(cmd.bss.ssid, params->ssid, params->ssid_len); + cmd.bss.type = CMD_BSS_TYPE_IBSS; + cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval); + cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS; + cmd.bss.ds.header.len = 1; + cmd.bss.ds.channel = params->chandef.chan->hw_value; + cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS; + cmd.bss.ibss.header.len = 2; + cmd.bss.ibss.atimwindow = 0; + cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); + + /* set rates to the intersection of our rates and the rates in the + bss */ + rcu_read_lock(); + rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); + if (!rates_eid) { + lbs_add_rates(cmd.bss.rates); + } else { + rates_max = rates_eid[1]; + if (rates_max > MAX_RATES) { + lbs_deb_join("invalid rates"); + rcu_read_unlock(); + ret = -EINVAL; + goto out; + } + rates = cmd.bss.rates; + for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { + u8 hw_rate = lbs_rates[hw].bitrate / 5; + for (i = 0; i < rates_max; i++) { + if (hw_rate == (rates_eid[i+2] & 0x7f)) { + u8 rate = rates_eid[i+2]; + if (rate == 0x02 || rate == 0x04 || + rate == 0x0b || rate == 0x16) + rate |= 0x80; + *rates++ = rate; + } + } + } + } + rcu_read_unlock(); + + /* Only v8 and below support setting this */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { + cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + } + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); + if (ret) + goto out; + + /* + * This is a sample response to CMD_802_11_AD_HOC_JOIN: + * + * response 2c 80 + * size 09 00 + * sequence xx xx + * result 00 00 + * reserved 00 + */ + lbs_join_post(priv, params, bss->bssid, bss->capability); + + out: + return ret; +} + + + +static int lbs_ibss_start_new(struct lbs_private *priv, + struct cfg80211_ibss_params *params) +{ + struct cmd_ds_802_11_ad_hoc_start cmd; + struct cmd_ds_802_11_ad_hoc_result *resp = + (struct cmd_ds_802_11_ad_hoc_result *) &cmd; + u8 preamble = RADIO_PREAMBLE_SHORT; + int ret = 0; + u16 capability; + + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; + + /* + * Example CMD_802_11_AD_HOC_START command: + * + * command 2b 00 CMD_802_11_AD_HOC_START + * size b1 00 + * sequence xx xx + * result 00 00 + * ssid 54 45 53 54 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * 00 00 00 00 00 00 00 00 + * bss type 02 + * beacon period 64 00 + * dtim period 00 + * IE IBSS 06 + * IE IBSS len 02 + * IE IBSS atim 00 00 + * reserved 00 00 00 00 + * IE DS 03 + * IE DS len 01 + * IE DS channel 01 + * reserved 00 00 00 00 + * probe delay 00 00 + * capability 02 00 + * rates 82 84 8b 96 (basic rates with have bit 7 set) + * 0c 12 18 24 30 48 60 6c + * padding 100 bytes + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.ssid, params->ssid, params->ssid_len); + cmd.bsstype = CMD_BSS_TYPE_IBSS; + cmd.beaconperiod = cpu_to_le16(params->beacon_interval); + cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; + cmd.ibss.header.len = 2; + cmd.ibss.atimwindow = 0; + cmd.ds.header.id = WLAN_EID_DS_PARAMS; + cmd.ds.header.len = 1; + cmd.ds.channel = params->chandef.chan->hw_value; + /* Only v8 and below support setting probe delay */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + /* TODO: mix in WLAN_CAPABILITY_PRIVACY */ + capability = WLAN_CAPABILITY_IBSS; + cmd.capability = cpu_to_le16(capability); + lbs_add_rates(cmd.rates); + + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); + if (ret) + goto out; + + /* + * This is a sample response to CMD_802_11_AD_HOC_JOIN: + * + * response 2b 80 + * size 14 00 + * sequence xx xx + * result 00 00 + * reserved 00 + * bssid 02 2b 7b 0f 86 0e + */ + lbs_join_post(priv, params, resp->bssid, capability); + + out: + return ret; +} + + +static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = 0; + struct cfg80211_bss *bss; + + if (dev == priv->mesh_dev) + return -EOPNOTSUPP; + + if (!params->chandef.chan) { + ret = -ENOTSUPP; + goto out; + } + + ret = lbs_set_channel(priv, params->chandef.chan->hw_value); + if (ret) + goto out; + + /* Search if someone is beaconing. This assumes that the + * bss list is populated already */ + bss = cfg80211_get_bss(wiphy, params->chandef.chan, params->bssid, + params->ssid, params->ssid_len, + IEEE80211_BSS_TYPE_IBSS, IEEE80211_PRIVACY_ANY); + + if (bss) { + ret = lbs_ibss_join_existing(priv, params, bss); + cfg80211_put_bss(wiphy, bss); + } else + ret = lbs_ibss_start_new(priv, params); + + + out: + return ret; +} + + +static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + struct cmd_ds_802_11_ad_hoc_stop cmd; + int ret = 0; + + if (dev == priv->mesh_dev) + return -EOPNOTSUPP; + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); + + /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */ + lbs_mac_event_disconnected(priv, true); + + return ret; +} + + + +static int lbs_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, + bool enabled, int timeout) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + if (!(priv->fwcapinfo & FW_CAPINFO_PS)) { + if (!enabled) + return 0; + else + return -EINVAL; + } + /* firmware does not work well with too long latency with power saving + * enabled, so do not enable it if there is only polling, no + * interrupts (like in some sdio hosts which can only + * poll for sdio irqs) + */ + if (priv->is_polling) { + if (!enabled) + return 0; + else + return -EINVAL; + } + if (!enabled) { + priv->psmode = LBS802_11POWERMODECAM; + if (priv->psstate != PS_STATE_FULL_POWER) + lbs_set_ps_mode(priv, + PS_MODE_ACTION_EXIT_PS, + true); + return 0; + } + if (priv->psmode != LBS802_11POWERMODECAM) + return 0; + priv->psmode = LBS802_11POWERMODEMAX_PSP; + if (priv->connect_status == LBS_CONNECTED) + lbs_set_ps_mode(priv, PS_MODE_ACTION_ENTER_PS, true); + return 0; +} + +/* + * Initialization + */ + +static const struct cfg80211_ops lbs_cfg80211_ops = { + .set_monitor_channel = lbs_cfg_set_monitor_channel, + .libertas_set_mesh_channel = lbs_cfg_set_mesh_channel, + .scan = lbs_cfg_scan, + .connect = lbs_cfg_connect, + .disconnect = lbs_cfg_disconnect, + .add_key = lbs_cfg_add_key, + .del_key = lbs_cfg_del_key, + .set_default_key = lbs_cfg_set_default_key, + .get_station = lbs_cfg_get_station, + .change_virtual_intf = lbs_change_intf, + .join_ibss = lbs_join_ibss, + .leave_ibss = lbs_leave_ibss, + .set_power_mgmt = lbs_set_power_mgmt, +}; + + +/* + * At this time lbs_private *priv doesn't even exist, so we just allocate + * memory and don't initialize the wiphy further. This is postponed until we + * can talk to the firmware and happens at registration time in + * lbs_cfg_wiphy_register(). + */ +struct wireless_dev *lbs_cfg_alloc(struct device *dev) +{ + int ret = 0; + struct wireless_dev *wdev; + + wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); + if (!wdev) + return ERR_PTR(-ENOMEM); + + wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); + if (!wdev->wiphy) { + dev_err(dev, "cannot allocate wiphy\n"); + ret = -ENOMEM; + goto err_wiphy_new; + } + + return wdev; + + err_wiphy_new: + kfree(wdev); + return ERR_PTR(ret); +} + + +static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) +{ + struct region_code_mapping { + const char *cn; + int code; + }; + + /* Section 5.17.2 */ + static const struct region_code_mapping regmap[] = { + {"US ", 0x10}, /* US FCC */ + {"CA ", 0x20}, /* Canada */ + {"EU ", 0x30}, /* ETSI */ + {"ES ", 0x31}, /* Spain */ + {"FR ", 0x32}, /* France */ + {"JP ", 0x40}, /* Japan */ + }; + size_t i; + + for (i = 0; i < ARRAY_SIZE(regmap); i++) + if (regmap[i].code == priv->regioncode) { + regulatory_hint(priv->wdev->wiphy, regmap[i].cn); + break; + } +} + +static void lbs_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); + if (lbs_iface_active(priv)) + lbs_set_11d_domain_info(priv); +} + +/* + * This function get's called after lbs_setup_firmware() determined the + * firmware capabities. So we can setup the wiphy according to our + * hardware/firmware. + */ +int lbs_cfg_register(struct lbs_private *priv) +{ + struct wireless_dev *wdev = priv->wdev; + int ret; + + wdev->wiphy->max_scan_ssids = 1; + wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + + wdev->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + if (lbs_rtap_supported(priv)) + wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); + if (lbs_mesh_activated(priv)) + wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MESH_POINT); + + wdev->wiphy->bands[NL80211_BAND_2GHZ] = &lbs_band_2ghz; + + /* + * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have + * never seen a firmware without WPA + */ + wdev->wiphy->cipher_suites = cipher_suites; + wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + wdev->wiphy->reg_notifier = lbs_reg_notifier; + + ret = wiphy_register(wdev->wiphy); + if (ret < 0) + pr_err("cannot register wiphy device\n"); + + priv->wiphy_registered = true; + + ret = register_netdev(priv->dev); + if (ret) + pr_err("cannot register network device\n"); + + INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); + + lbs_cfg_set_regulatory_hint(priv); + + return ret; +} + +void lbs_scan_deinit(struct lbs_private *priv) +{ + cancel_delayed_work_sync(&priv->scan_work); +} + + +void lbs_cfg_free(struct lbs_private *priv) +{ + struct wireless_dev *wdev = priv->wdev; + + if (!wdev) + return; + + if (priv->wiphy_registered) + wiphy_unregister(wdev->wiphy); + + if (wdev->wiphy) + wiphy_free(wdev->wiphy); + + kfree(wdev); +} |