diff options
Diffstat (limited to 'drivers/phy/rockchip/phy-rockchip-inno-usb2.c')
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 1463 |
1 files changed, 1463 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c new file mode 100644 index 000000000..5049dac79 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -0,0 +1,1463 @@ +/* + * Rockchip USB2.0 PHY with Innosilicon IP block driver + * + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/extcon-provider.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio/consumer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/usb/of.h> +#include <linux/usb/otg.h> + +#define BIT_WRITEABLE_SHIFT 16 +#define SCHEDULE_DELAY (60 * HZ) +#define OTG_SCHEDULE_DELAY (2 * HZ) + +enum rockchip_usb2phy_port_id { + USB2PHY_PORT_OTG, + USB2PHY_PORT_HOST, + USB2PHY_NUM_PORTS, +}; + +enum rockchip_usb2phy_host_state { + PHY_STATE_HS_ONLINE = 0, + PHY_STATE_DISCONNECT = 1, + PHY_STATE_CONNECT = 2, + PHY_STATE_FS_LS_ONLINE = 4, +}; + +/** + * Different states involved in USB charger detection. + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +static const unsigned int rockchip_usb2phy_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_SLOW, + EXTCON_NONE, +}; + +struct usb2phy_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int disable; + unsigned int enable; +}; + +/** + * struct rockchip_chg_det_reg: usb charger detect registers + * @cp_det: charging port detected successfully. + * @dcp_det: dedicated charging port detected successfully. + * @dp_det: assert data pin connect successfully. + * @idm_sink_en: open dm sink curren. + * @idp_sink_en: open dp sink current. + * @idp_src_en: open dm source current. + * @rdm_pdwn_en: open dm pull down resistor. + * @vdm_src_en: open dm voltage source. + * @vdp_src_en: open dp voltage source. + * @opmode: utmi operational mode. + */ +struct rockchip_chg_det_reg { + struct usb2phy_reg cp_det; + struct usb2phy_reg dcp_det; + struct usb2phy_reg dp_det; + struct usb2phy_reg idm_sink_en; + struct usb2phy_reg idp_sink_en; + struct usb2phy_reg idp_src_en; + struct usb2phy_reg rdm_pdwn_en; + struct usb2phy_reg vdm_src_en; + struct usb2phy_reg vdp_src_en; + struct usb2phy_reg opmode; +}; + +/** + * struct rockchip_usb2phy_port_cfg: usb-phy port configuration. + * @phy_sus: phy suspend register. + * @bvalid_det_en: vbus valid rise detection enable register. + * @bvalid_det_st: vbus valid rise detection status register. + * @bvalid_det_clr: vbus valid rise detection clear register. + * @ls_det_en: linestate detection enable register. + * @ls_det_st: linestate detection state register. + * @ls_det_clr: linestate detection clear register. + * @utmi_avalid: utmi vbus avalid status register. + * @utmi_bvalid: utmi vbus bvalid status register. + * @utmi_ls: utmi linestate state register. + * @utmi_hstdet: utmi host disconnect register. + */ +struct rockchip_usb2phy_port_cfg { + struct usb2phy_reg phy_sus; + struct usb2phy_reg bvalid_det_en; + struct usb2phy_reg bvalid_det_st; + struct usb2phy_reg bvalid_det_clr; + struct usb2phy_reg ls_det_en; + struct usb2phy_reg ls_det_st; + struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_avalid; + struct usb2phy_reg utmi_bvalid; + struct usb2phy_reg utmi_ls; + struct usb2phy_reg utmi_hstdet; +}; + +/** + * struct rockchip_usb2phy_cfg: usb-phy configuration. + * @reg: the address offset of grf for usb-phy config. + * @num_ports: specify how many ports that the phy has. + * @clkout_ctl: keep on/turn off output clk of phy. + * @chg_det: charger detection registers. + */ +struct rockchip_usb2phy_cfg { + unsigned int reg; + unsigned int num_ports; + struct usb2phy_reg clkout_ctl; + const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; + const struct rockchip_chg_det_reg chg_det; +}; + +/** + * struct rockchip_usb2phy_port: usb-phy port data. + * @port_id: flag for otg port or host port. + * @suspended: phy suspended flag. + * @utmi_avalid: utmi avalid status usage flag. + * true - use avalid to get vbus status + * flase - use bvalid to get vbus status + * @vbus_attached: otg device vbus status. + * @bvalid_irq: IRQ number assigned for vbus valid rise detection. + * @ls_irq: IRQ number assigned for linestate detection. + * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate + * irqs to one irq in otg-port. + * @mutex: for register updating in sm_work. + * @chg_work: charge detect work. + * @otg_sm_work: OTG state machine work. + * @sm_work: HOST state machine work. + * @phy_cfg: port register configuration, assigned by driver data. + * @event_nb: hold event notification callback. + * @state: define OTG enumeration states before device reset. + * @mode: the dr_mode of the controller. + */ +struct rockchip_usb2phy_port { + struct phy *phy; + unsigned int port_id; + bool suspended; + bool utmi_avalid; + bool vbus_attached; + int bvalid_irq; + int ls_irq; + int otg_mux_irq; + struct mutex mutex; + struct delayed_work chg_work; + struct delayed_work otg_sm_work; + struct delayed_work sm_work; + const struct rockchip_usb2phy_port_cfg *port_cfg; + struct notifier_block event_nb; + enum usb_otg_state state; + enum usb_dr_mode mode; +}; + +/** + * struct rockchip_usb2phy: usb2.0 phy driver data. + * @grf: General Register Files regmap. + * @usbgrf: USB General Register Files regmap. + * @clk: clock struct of phy input clk. + * @clk480m: clock struct of phy output clk. + * @clk_hw: clock struct of phy output clk management. + * @chg_state: states involved in USB charger detection. + * @chg_type: USB charger types. + * @dcd_retries: The retry count used to track Data contact + * detection process. + * @edev: extcon device for notification registration + * @phy_cfg: phy register configuration, assigned by driver data. + * @ports: phy port instance. + */ +struct rockchip_usb2phy { + struct device *dev; + struct regmap *grf; + struct regmap *usbgrf; + struct clk *clk; + struct clk *clk480m; + struct clk_hw clk480m_hw; + enum usb_chg_state chg_state; + enum power_supply_type chg_type; + u8 dcd_retries; + struct extcon_dev *edev; + const struct rockchip_usb2phy_cfg *phy_cfg; + struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS]; +}; + +static inline struct regmap *get_reg_base(struct rockchip_usb2phy *rphy) +{ + return rphy->usbgrf == NULL ? rphy->grf : rphy->usbgrf; +} + +static inline int property_enable(struct regmap *base, + const struct usb2phy_reg *reg, bool en) +{ + unsigned int val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(base, reg->offset, val); +} + +static inline bool property_enabled(struct regmap *base, + const struct usb2phy_reg *reg) +{ + int ret; + unsigned int tmp, orig; + unsigned int mask = GENMASK(reg->bitend, reg->bitstart); + + ret = regmap_read(base, reg->offset, &orig); + if (ret) + return false; + + tmp = (orig & mask) >> reg->bitstart; + return tmp == reg->enable; +} + +static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + struct regmap *base = get_reg_base(rphy); + int ret; + + /* turn on 480m clk output if it is off */ + if (!property_enabled(base, &rphy->phy_cfg->clkout_ctl)) { + ret = property_enable(base, &rphy->phy_cfg->clkout_ctl, true); + if (ret) + return ret; + + /* waiting for the clk become stable */ + usleep_range(1200, 1300); + } + + return 0; +} + +static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + struct regmap *base = get_reg_base(rphy); + + /* turn off 480m clk output */ + property_enable(base, &rphy->phy_cfg->clkout_ctl, false); +} + +static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + struct regmap *base = get_reg_base(rphy); + + return property_enabled(base, &rphy->phy_cfg->clkout_ctl); +} + +static unsigned long +rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 480000000; +} + +static const struct clk_ops rockchip_usb2phy_clkout_ops = { + .prepare = rockchip_usb2phy_clk480m_prepare, + .unprepare = rockchip_usb2phy_clk480m_unprepare, + .is_prepared = rockchip_usb2phy_clk480m_prepared, + .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate, +}; + +static void rockchip_usb2phy_clk480m_unregister(void *data) +{ + struct rockchip_usb2phy *rphy = data; + + of_clk_del_provider(rphy->dev->of_node); + clk_unregister(rphy->clk480m); +} + +static int +rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy) +{ + struct device_node *node = rphy->dev->of_node; + struct clk_init_data init; + const char *clk_name; + int ret; + + init.flags = 0; + init.name = "clk_usbphy_480m"; + init.ops = &rockchip_usb2phy_clkout_ops; + + /* optional override of the clockname */ + of_property_read_string(node, "clock-output-names", &init.name); + + if (rphy->clk) { + clk_name = __clk_get_name(rphy->clk); + init.parent_names = &clk_name; + init.num_parents = 1; + } else { + init.parent_names = NULL; + init.num_parents = 0; + } + + rphy->clk480m_hw.init = &init; + + /* register the clock */ + rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw); + if (IS_ERR(rphy->clk480m)) { + ret = PTR_ERR(rphy->clk480m); + goto err_ret; + } + + ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m); + if (ret < 0) + goto err_clk_provider; + + ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister, + rphy); + if (ret < 0) + goto err_unreg_action; + + return 0; + +err_unreg_action: + of_clk_del_provider(node); +err_clk_provider: + clk_unregister(rphy->clk480m); +err_ret: + return ret; +} + +static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy) +{ + int ret; + struct device_node *node = rphy->dev->of_node; + struct extcon_dev *edev; + + if (of_property_read_bool(node, "extcon")) { + edev = extcon_get_edev_by_phandle(rphy->dev, 0); + if (IS_ERR(edev)) { + if (PTR_ERR(edev) != -EPROBE_DEFER) + dev_err(rphy->dev, "Invalid or missing extcon\n"); + return PTR_ERR(edev); + } + } else { + /* Initialize extcon device */ + edev = devm_extcon_dev_allocate(rphy->dev, + rockchip_usb2phy_extcon_cable); + + if (IS_ERR(edev)) + return -ENOMEM; + + ret = devm_extcon_dev_register(rphy->dev, edev); + if (ret) { + dev_err(rphy->dev, "failed to register extcon device\n"); + return ret; + } + } + + rphy->edev = edev; + + return 0; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret = 0; + + mutex_lock(&rport->mutex); + + if (rport->port_id == USB2PHY_PORT_OTG) { + if (rport->mode != USB_DR_MODE_HOST && + rport->mode != USB_DR_MODE_UNKNOWN) { + /* clear bvalid status and enable bvalid detect irq */ + ret = property_enable(rphy->grf, + &rport->port_cfg->bvalid_det_clr, + true); + if (ret) + goto out; + + ret = property_enable(rphy->grf, + &rport->port_cfg->bvalid_det_en, + true); + if (ret) + goto out; + + schedule_delayed_work(&rport->otg_sm_work, + OTG_SCHEDULE_DELAY * 3); + } else { + /* If OTG works in host only mode, do nothing. */ + dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode); + } + } else if (rport->port_id == USB2PHY_PORT_HOST) { + /* clear linestate and enable linestate detect irq */ + ret = property_enable(rphy->grf, + &rport->port_cfg->ls_det_clr, true); + if (ret) + goto out; + + ret = property_enable(rphy->grf, + &rport->port_cfg->ls_det_en, true); + if (ret) + goto out; + + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); + } + +out: + mutex_unlock(&rport->mutex); + return ret; +} + +static int rockchip_usb2phy_power_on(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + struct regmap *base = get_reg_base(rphy); + int ret; + + dev_dbg(&rport->phy->dev, "port power on\n"); + + if (!rport->suspended) + return 0; + + ret = clk_prepare_enable(rphy->clk480m); + if (ret) + return ret; + + ret = property_enable(base, &rport->port_cfg->phy_sus, false); + if (ret) + return ret; + + /* waiting for the utmi_clk to become stable */ + usleep_range(1500, 2000); + + rport->suspended = false; + return 0; +} + +static int rockchip_usb2phy_power_off(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + struct regmap *base = get_reg_base(rphy); + int ret; + + dev_dbg(&rport->phy->dev, "port power off\n"); + + if (rport->suspended) + return 0; + + ret = property_enable(base, &rport->port_cfg->phy_sus, true); + if (ret) + return ret; + + rport->suspended = true; + clk_disable_unprepare(rphy->clk480m); + + return 0; +} + +static int rockchip_usb2phy_exit(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + + if (rport->port_id == USB2PHY_PORT_OTG && + rport->mode != USB_DR_MODE_HOST && + rport->mode != USB_DR_MODE_UNKNOWN) { + cancel_delayed_work_sync(&rport->otg_sm_work); + cancel_delayed_work_sync(&rport->chg_work); + } else if (rport->port_id == USB2PHY_PORT_HOST) + cancel_delayed_work_sync(&rport->sm_work); + + return 0; +} + +static const struct phy_ops rockchip_usb2phy_ops = { + .init = rockchip_usb2phy_init, + .exit = rockchip_usb2phy_exit, + .power_on = rockchip_usb2phy_power_on, + .power_off = rockchip_usb2phy_power_off, + .owner = THIS_MODULE, +}; + +static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, + otg_sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + static unsigned int cable; + unsigned long delay; + bool vbus_attach, sch_work, notify_charger; + + if (rport->utmi_avalid) + vbus_attach = property_enabled(rphy->grf, + &rport->port_cfg->utmi_avalid); + else + vbus_attach = property_enabled(rphy->grf, + &rport->port_cfg->utmi_bvalid); + + sch_work = false; + notify_charger = false; + delay = OTG_SCHEDULE_DELAY; + dev_dbg(&rport->phy->dev, "%s otg sm work\n", + usb_otg_state_string(rport->state)); + + switch (rport->state) { + case OTG_STATE_UNDEFINED: + rport->state = OTG_STATE_B_IDLE; + if (!vbus_attach) + rockchip_usb2phy_power_off(rport->phy); + /* fall through */ + case OTG_STATE_B_IDLE: + if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) { + dev_dbg(&rport->phy->dev, "usb otg host connect\n"); + rport->state = OTG_STATE_A_HOST; + rockchip_usb2phy_power_on(rport->phy); + return; + } else if (vbus_attach) { + dev_dbg(&rport->phy->dev, "vbus_attach\n"); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + schedule_delayed_work(&rport->chg_work, 0); + return; + case USB_CHG_STATE_DETECTED: + switch (rphy->chg_type) { + case POWER_SUPPLY_TYPE_USB: + dev_dbg(&rport->phy->dev, "sdp cable is connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_SDP; + break; + case POWER_SUPPLY_TYPE_USB_DCP: + dev_dbg(&rport->phy->dev, "dcp cable is connected\n"); + rockchip_usb2phy_power_off(rport->phy); + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_DCP; + break; + case POWER_SUPPLY_TYPE_USB_CDP: + dev_dbg(&rport->phy->dev, "cdp cable is connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_CDP; + break; + default: + break; + } + break; + default: + break; + } + } else { + notify_charger = true; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + } + + if (rport->vbus_attached != vbus_attach) { + rport->vbus_attached = vbus_attach; + + if (notify_charger && rphy->edev) { + extcon_set_state_sync(rphy->edev, + cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(rphy->edev, + EXTCON_USB, + vbus_attach); + } + } + break; + case OTG_STATE_B_PERIPHERAL: + if (!vbus_attach) { + dev_dbg(&rport->phy->dev, "usb disconnect\n"); + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + rport->state = OTG_STATE_B_IDLE; + delay = 0; + rockchip_usb2phy_power_off(rport->phy); + } + sch_work = true; + break; + case OTG_STATE_A_HOST: + if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) { + dev_dbg(&rport->phy->dev, "usb otg host disconnect\n"); + rport->state = OTG_STATE_B_IDLE; + rockchip_usb2phy_power_off(rport->phy); + } + break; + default: + break; + } + + if (sch_work) + schedule_delayed_work(&rport->otg_sm_work, delay); +} + +static const char *chg_to_string(enum power_supply_type chg_type) +{ + switch (chg_type) { + case POWER_SUPPLY_TYPE_USB: + return "USB_SDP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_DCP: + return "USB_DCP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_CDP: + return "USB_CDP_CHARGER"; + default: + return "INVALID_CHARGER"; + } +} + +static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy, + bool en) +{ + struct regmap *base = get_reg_base(rphy); + + property_enable(base, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en); + property_enable(base, &rphy->phy_cfg->chg_det.idp_src_en, en); +} + +static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + struct regmap *base = get_reg_base(rphy); + + property_enable(base, &rphy->phy_cfg->chg_det.vdp_src_en, en); + property_enable(base, &rphy->phy_cfg->chg_det.idm_sink_en, en); +} + +static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + struct regmap *base = get_reg_base(rphy); + + property_enable(base, &rphy->phy_cfg->chg_det.vdm_src_en, en); + property_enable(base, &rphy->phy_cfg->chg_det.idp_sink_en, en); +} + +#define CHG_DCD_POLL_TIME (100 * HZ / 1000) +#define CHG_DCD_MAX_RETRIES 6 +#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000) +#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000) +static void rockchip_chg_detect_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, chg_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + struct regmap *base = get_reg_base(rphy); + bool is_dcd, tmout, vout; + unsigned long delay; + + dev_dbg(&rport->phy->dev, "chg detection work state = %d\n", + rphy->chg_state); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + if (!rport->suspended) + rockchip_usb2phy_power_off(rport->phy); + /* put the controller in non-driving mode */ + property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); + /* Start DCD processing stage 1 */ + rockchip_chg_enable_dcd(rphy, true); + rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; + rphy->dcd_retries = 0; + delay = CHG_DCD_POLL_TIME; + break; + case USB_CHG_STATE_WAIT_FOR_DCD: + /* get data contact detection status */ + is_dcd = property_enabled(rphy->grf, + &rphy->phy_cfg->chg_det.dp_det); + tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES; + /* stage 2 */ + if (is_dcd || tmout) { + /* stage 4 */ + /* Turn off DCD circuitry */ + rockchip_chg_enable_dcd(rphy, false); + /* Voltage Source on DP, Probe on DM */ + rockchip_chg_enable_primary_det(rphy, true); + delay = CHG_PRIMARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_DCD_DONE; + } else { + /* stage 3 */ + delay = CHG_DCD_POLL_TIME; + } + break; + case USB_CHG_STATE_DCD_DONE: + vout = property_enabled(rphy->grf, + &rphy->phy_cfg->chg_det.cp_det); + rockchip_chg_enable_primary_det(rphy, false); + if (vout) { + /* Voltage Source on DM, Probe on DP */ + rockchip_chg_enable_secondary_det(rphy, true); + delay = CHG_SECONDARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE; + } else { + if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) { + /* floating charger found */ + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } else { + rphy->chg_type = POWER_SUPPLY_TYPE_USB; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } + } + break; + case USB_CHG_STATE_PRIMARY_DONE: + vout = property_enabled(rphy->grf, + &rphy->phy_cfg->chg_det.dcp_det); + /* Turn off voltage source */ + rockchip_chg_enable_secondary_det(rphy, false); + if (vout) + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + else + rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP; + /* fall through */ + case USB_CHG_STATE_SECONDARY_DONE: + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + /* fall through */ + case USB_CHG_STATE_DETECTED: + /* put the controller in normal mode */ + property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + dev_info(&rport->phy->dev, "charger = %s\n", + chg_to_string(rphy->chg_type)); + return; + default: + return; + } + + schedule_delayed_work(&rport->chg_work, delay); +} + +/* + * The function manage host-phy port state and suspend/resume phy port + * to save power. + * + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether + * devices is disconnect or not. Besides, we do not need care it is FS/LS + * disconnected or HS disconnected, actually, we just only need get the + * device is disconnected at last through rearm the delayed work, + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case. + * + * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke + * some clk related APIs, so do not invoke it from interrupt context directly. + */ +static void rockchip_usb2phy_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + unsigned int sh = rport->port_cfg->utmi_hstdet.bitend - + rport->port_cfg->utmi_hstdet.bitstart + 1; + unsigned int ul, uhd, state; + unsigned int ul_mask, uhd_mask; + int ret; + + mutex_lock(&rport->mutex); + + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul); + if (ret < 0) + goto next_schedule; + + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd); + if (ret < 0) + goto next_schedule; + + uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend, + rport->port_cfg->utmi_hstdet.bitstart); + ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend, + rport->port_cfg->utmi_ls.bitstart); + + /* stitch on utmi_ls and utmi_hstdet as phy state */ + state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) | + (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh); + + switch (state) { + case PHY_STATE_HS_ONLINE: + dev_dbg(&rport->phy->dev, "HS online\n"); + break; + case PHY_STATE_FS_LS_ONLINE: + /* + * For FS/LS device, the online state share with connect state + * from utmi_ls and utmi_hstdet register, so we distinguish + * them via suspended flag. + * + * Plus, there are two cases, one is D- Line pull-up, and D+ + * line pull-down, the state is 4; another is D+ line pull-up, + * and D- line pull-down, the state is 2. + */ + if (!rport->suspended) { + /* D- line pull-up, D+ line pull-down */ + dev_dbg(&rport->phy->dev, "FS/LS online\n"); + break; + } + /* fall through */ + case PHY_STATE_CONNECT: + if (rport->suspended) { + dev_dbg(&rport->phy->dev, "Connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->suspended = false; + } else { + /* D+ line pull-up, D- line pull-down */ + dev_dbg(&rport->phy->dev, "FS/LS online\n"); + } + break; + case PHY_STATE_DISCONNECT: + if (!rport->suspended) { + dev_dbg(&rport->phy->dev, "Disconnected\n"); + rockchip_usb2phy_power_off(rport->phy); + rport->suspended = true; + } + + /* + * activate the linestate detection to get the next device + * plug-in irq. + */ + property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true); + property_enable(rphy->grf, &rport->port_cfg->ls_det_en, true); + + /* + * we don't need to rearm the delayed work when the phy port + * is suspended. + */ + mutex_unlock(&rport->mutex); + return; + default: + dev_dbg(&rport->phy->dev, "unknown phy state\n"); + break; + } + +next_schedule: + mutex_unlock(&rport->mutex); + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); +} + +static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy->grf, &rport->port_cfg->ls_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* disable linestate detect irq and clear its status */ + property_enable(rphy->grf, &rport->port_cfg->ls_det_en, false); + property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true); + + mutex_unlock(&rport->mutex); + + /* + * In this case for host phy port, a new device is plugged in, + * meanwhile, if the phy port is suspended, we need rearm the work to + * resume it and mange its states; otherwise, we do nothing about that. + */ + if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST) + rockchip_usb2phy_sm_work(&rport->sm_work.work); + + return IRQ_HANDLED; +} + +static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* clear bvalid detect irq pending status */ + property_enable(rphy->grf, &rport->port_cfg->bvalid_det_clr, true); + + mutex_unlock(&rport->mutex); + + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + + return IRQ_HANDLED; +} + +static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st)) + return rockchip_usb2phy_bvalid_irq(irq, data); + else + return IRQ_NONE; +} + +static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_HOST; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST]; + rport->suspended = true; + + mutex_init(&rport->mutex); + INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work); + + rport->ls_irq = of_irq_get_byname(child_np, "linestate"); + if (rport->ls_irq < 0) { + dev_err(rphy->dev, "no linestate irq provided\n"); + return rport->ls_irq; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL, + rockchip_usb2phy_linestate_irq, + IRQF_ONESHOT, + "rockchip_usb2phy", rport); + if (ret) { + dev_err(rphy->dev, "failed to request linestate irq handle\n"); + return ret; + } + + return 0; +} + +static int rockchip_otg_event(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct rockchip_usb2phy_port *rport = + container_of(nb, struct rockchip_usb2phy_port, event_nb); + + schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY); + + return NOTIFY_DONE; +} + +static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_OTG; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; + rport->state = OTG_STATE_UNDEFINED; + + /* + * set suspended flag to true, but actually don't + * put phy in suspend mode, it aims to enable usb + * phy and clock in power_on() called by usb controller + * driver during probe. + */ + rport->suspended = true; + rport->vbus_attached = false; + + mutex_init(&rport->mutex); + + rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1); + if (rport->mode == USB_DR_MODE_HOST || + rport->mode == USB_DR_MODE_UNKNOWN) { + ret = 0; + goto out; + } + + INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work); + INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work); + + rport->utmi_avalid = + of_property_read_bool(child_np, "rockchip,utmi-avalid"); + + /* + * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate + * interrupts muxed together, so probe the otg-mux interrupt first, + * if not found, then look for the regular interrupts one by one. + */ + rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux"); + if (rport->otg_mux_irq > 0) { + ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq, + NULL, + rockchip_usb2phy_otg_mux_irq, + IRQF_ONESHOT, + "rockchip_usb2phy_otg", + rport); + if (ret) { + dev_err(rphy->dev, + "failed to request otg-mux irq handle\n"); + goto out; + } + } else { + rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid"); + if (rport->bvalid_irq < 0) { + dev_err(rphy->dev, "no vbus valid irq provided\n"); + ret = rport->bvalid_irq; + goto out; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, + NULL, + rockchip_usb2phy_bvalid_irq, + IRQF_ONESHOT, + "rockchip_usb2phy_bvalid", + rport); + if (ret) { + dev_err(rphy->dev, + "failed to request otg-bvalid irq handle\n"); + goto out; + } + } + + if (!IS_ERR(rphy->edev)) { + rport->event_nb.notifier_call = rockchip_otg_event; + + ret = devm_extcon_register_notifier(rphy->dev, rphy->edev, + EXTCON_USB_HOST, &rport->event_nb); + if (ret) + dev_err(rphy->dev, "register USB HOST notifier failed\n"); + } + +out: + return ret; +} + +static int rockchip_usb2phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct rockchip_usb2phy *rphy; + const struct rockchip_usb2phy_cfg *phy_cfgs; + const struct of_device_id *match; + unsigned int reg; + int index, ret; + + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL); + if (!rphy) + return -ENOMEM; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "phy configs are not assigned!\n"); + return -EINVAL; + } + + if (!dev->parent || !dev->parent->of_node) + return -EINVAL; + + rphy->grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(rphy->grf)) + return PTR_ERR(rphy->grf); + + if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) { + rphy->usbgrf = + syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,usbgrf"); + if (IS_ERR(rphy->usbgrf)) + return PTR_ERR(rphy->usbgrf); + } else { + rphy->usbgrf = NULL; + } + + if (of_property_read_u32(np, "reg", ®)) { + dev_err(dev, "the reg property is not assigned in %s node\n", + np->name); + return -EINVAL; + } + + rphy->dev = dev; + phy_cfgs = match->data; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + platform_set_drvdata(pdev, rphy); + + ret = rockchip_usb2phy_extcon_register(rphy); + if (ret) + return ret; + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == reg) { + rphy->phy_cfg = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!rphy->phy_cfg) { + dev_err(dev, "no phy-config can be matched with %s node\n", + np->name); + return -EINVAL; + } + + rphy->clk = of_clk_get_by_name(np, "phyclk"); + if (!IS_ERR(rphy->clk)) { + clk_prepare_enable(rphy->clk); + } else { + dev_info(&pdev->dev, "no phyclk specified\n"); + rphy->clk = NULL; + } + + ret = rockchip_usb2phy_clk480m_register(rphy); + if (ret) { + dev_err(dev, "failed to register 480m output clock\n"); + goto disable_clks; + } + + index = 0; + for_each_available_child_of_node(np, child_np) { + struct rockchip_usb2phy_port *rport = &rphy->ports[index]; + struct phy *phy; + + /* This driver aims to support both otg-port and host-port */ + if (of_node_cmp(child_np->name, "host-port") && + of_node_cmp(child_np->name, "otg-port")) + goto next_child; + + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + ret = PTR_ERR(phy); + goto put_child; + } + + rport->phy = phy; + phy_set_drvdata(rport->phy, rport); + + /* initialize otg/host port separately */ + if (!of_node_cmp(child_np->name, "host-port")) { + ret = rockchip_usb2phy_host_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } else { + ret = rockchip_usb2phy_otg_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } + +next_child: + /* to prevent out of boundary */ + if (++index >= rphy->phy_cfg->num_ports) + break; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); + +put_child: + of_node_put(child_np); +disable_clks: + if (rphy->clk) { + clk_disable_unprepare(rphy->clk); + clk_put(rphy->clk); + } + return ret; +} + +static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = { + { + .reg = 0x760, + .num_ports = 2, + .clkout_ctl = { 0x0768, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0760, 15, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0680, 3, 3, 0, 1 }, + .bvalid_det_st = { 0x0690, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 }, + .ls_det_en = { 0x0680, 2, 2, 0, 1 }, + .ls_det_st = { 0x0690, 2, 2, 0, 1 }, + .ls_det_clr = { 0x06a0, 2, 2, 0, 1 }, + .utmi_bvalid = { 0x0480, 4, 4, 0, 1 }, + .utmi_ls = { 0x0480, 3, 2, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0764, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0680, 4, 4, 0, 1 }, + .ls_det_st = { 0x0690, 4, 4, 0, 1 }, + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0x0760, 3, 0, 5, 1 }, + .cp_det = { 0x0884, 4, 4, 0, 1 }, + .dcp_det = { 0x0884, 3, 3, 0, 1 }, + .dp_det = { 0x0884, 5, 5, 0, 1 }, + .idm_sink_en = { 0x0768, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0768, 7, 7, 0, 1 }, + .idp_src_en = { 0x0768, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0768, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0768, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0768, 11, 11, 0, 1 }, + }, + }, + { + .reg = 0x800, + .num_ports = 2, + .clkout_ctl = { 0x0808, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x800, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0684, 0, 0, 0, 1 }, + .ls_det_st = { 0x0694, 0, 0, 0, 1 }, + .ls_det_clr = { 0x06a4, 0, 0, 0, 1 } + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x804, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0684, 1, 1, 0, 1 }, + .ls_det_st = { 0x0694, 1, 1, 0, 1 }, + .ls_det_clr = { 0x06a4, 1, 1, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = { + { + .reg = 0x100, + .num_ports = 2, + .clkout_ctl = { 0x108, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0110, 2, 2, 0, 1 }, + .bvalid_det_st = { 0x0114, 2, 2, 0, 1 }, + .bvalid_det_clr = { 0x0118, 2, 2, 0, 1 }, + .ls_det_en = { 0x0110, 0, 0, 0, 1 }, + .ls_det_st = { 0x0114, 0, 0, 0, 1 }, + .ls_det_clr = { 0x0118, 0, 0, 0, 1 }, + .utmi_avalid = { 0x0120, 10, 10, 0, 1 }, + .utmi_bvalid = { 0x0120, 9, 9, 0, 1 }, + .utmi_ls = { 0x0120, 5, 4, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x104, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x110, 1, 1, 0, 1 }, + .ls_det_st = { 0x114, 1, 1, 0, 1 }, + .ls_det_clr = { 0x118, 1, 1, 0, 1 }, + .utmi_ls = { 0x120, 17, 16, 0, 1 }, + .utmi_hstdet = { 0x120, 19, 19, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0x0100, 3, 0, 5, 1 }, + .cp_det = { 0x0120, 24, 24, 0, 1 }, + .dcp_det = { 0x0120, 23, 23, 0, 1 }, + .dp_det = { 0x0120, 25, 25, 0, 1 }, + .idm_sink_en = { 0x0108, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0108, 7, 7, 0, 1 }, + .idp_src_en = { 0x0108, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0108, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0108, 11, 11, 0, 1 }, + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = { + { + .reg = 0x700, + .num_ports = 2, + .clkout_ctl = { 0x0724, 15, 15, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0680, 4, 4, 0, 1 }, + .ls_det_st = { 0x0690, 4, 4, 0, 1 }, + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }, + .utmi_ls = { 0x049c, 14, 13, 0, 1 }, + .utmi_hstdet = { 0x049c, 12, 12, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { + { + .reg = 0xe450, + .num_ports = 2, + .clkout_ctl = { 0xe450, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe454, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, + .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, + .ls_det_st = { 0xe3e0, 6, 6, 0, 1 }, + .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 }, + .utmi_ls = { 0xe2ac, 22, 21, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0xe454, 3, 0, 5, 1 }, + .cp_det = { 0xe2ac, 2, 2, 0, 1 }, + .dcp_det = { 0xe2ac, 1, 1, 0, 1 }, + .dp_det = { 0xe2ac, 0, 0, 0, 1 }, + .idm_sink_en = { 0xe450, 8, 8, 0, 1 }, + .idp_sink_en = { 0xe450, 7, 7, 0, 1 }, + .idp_src_en = { 0xe450, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 }, + .vdm_src_en = { 0xe450, 12, 12, 0, 1 }, + .vdp_src_en = { 0xe450, 11, 11, 0, 1 }, + }, + }, + { + .reg = 0xe460, + .num_ports = 2, + .clkout_ctl = { 0xe460, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe464, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, + .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, + .ls_det_st = { 0xe3e0, 11, 11, 0, 1 }, + .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 }, + .utmi_ls = { 0xe2ac, 26, 25, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = { + { + .reg = 0x100, + .num_ports = 2, + .clkout_ctl = { 0x108, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0680, 3, 3, 0, 1 }, + .bvalid_det_st = { 0x0690, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 }, + .ls_det_en = { 0x0680, 2, 2, 0, 1 }, + .ls_det_st = { 0x0690, 2, 2, 0, 1 }, + .ls_det_clr = { 0x06a0, 2, 2, 0, 1 }, + .utmi_bvalid = { 0x0804, 10, 10, 0, 1 }, + .utmi_ls = { 0x0804, 13, 12, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0104, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0680, 4, 4, 0, 1 }, + .ls_det_st = { 0x0690, 4, 4, 0, 1 }, + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }, + .utmi_ls = { 0x0804, 9, 8, 0, 1 }, + .utmi_hstdet = { 0x0804, 7, 7, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0x0100, 3, 0, 5, 1 }, + .cp_det = { 0x0804, 1, 1, 0, 1 }, + .dcp_det = { 0x0804, 0, 0, 0, 1 }, + .dp_det = { 0x0804, 2, 2, 0, 1 }, + .idm_sink_en = { 0x0108, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0108, 7, 7, 0, 1 }, + .idp_src_en = { 0x0108, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0108, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0108, 11, 11, 0, 1 }, + }, + }, + { /* sentinel */ } +}; + +static const struct of_device_id rockchip_usb2phy_dt_match[] = { + { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs }, + { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs }, + { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs }, + { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs }, + { .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs }, + {} +}; +MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match); + +static struct platform_driver rockchip_usb2phy_driver = { + .probe = rockchip_usb2phy_probe, + .driver = { + .name = "rockchip-usb2phy", + .of_match_table = rockchip_usb2phy_dt_match, + }, +}; +module_platform_driver(rockchip_usb2phy_driver); + +MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); |