diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/pinctrl/intel/pinctrl-intel.c | 27 |
1 files changed, 26 insertions, 1 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 5e0adb00b..f9eb37bb3 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -423,9 +423,14 @@ static void __intel_gpio_set_direction(void __iomem *padcfg0, bool input) writel(value, padcfg0); } +static int __intel_gpio_get_gpio_mode(u32 value) +{ + return (value & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT; +} + static int intel_gpio_get_gpio_mode(void __iomem *padcfg0) { - return (readl(padcfg0) & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT; + return __intel_gpio_get_gpio_mode(readl(padcfg0)); } static void intel_gpio_set_gpio_mode(void __iomem *padcfg0) @@ -1429,6 +1434,7 @@ EXPORT_SYMBOL_GPL(intel_pinctrl_probe); static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned pin) { const struct pin_desc *pd = pin_desc_get(pctrl->pctldev, pin); + u32 value; if (!pd || !intel_pad_usable(pctrl, pin)) return false; @@ -1443,6 +1449,25 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned pin) gpiochip_line_is_irq(&pctrl->chip, pin)) return true; + /* + * The firmware on some systems may configure GPIO pins to be + * an interrupt source in so called "direct IRQ" mode. In such + * cases the GPIO controller driver has no idea if those pins + * are being used or not. At the same time, there is a known bug + * in the firmwares that don't restore the pin settings correctly + * after suspend, i.e. by an unknown reason the Rx value becomes + * inverted. + * + * Hence, let's save and restore the pins that are configured + * as GPIOs in the input mode with GPIROUTIOXAPIC bit set. + * + * See https://bugzilla.kernel.org/show_bug.cgi?id=214749. + */ + value = readl(intel_get_padcfg(pctrl, pin, PADCFG0)); + if ((value & PADCFG0_GPIROUTIOXAPIC) && (value & PADCFG0_GPIOTXDIS) && + (__intel_gpio_get_gpio_mode(value) == PADCFG0_PMODE_GPIO)) + return true; + return false; } |