diff options
Diffstat (limited to 'drivers/power/supply/axp288_fuel_gauge.c')
| -rw-r--r-- | drivers/power/supply/axp288_fuel_gauge.c | 899 |
1 files changed, 899 insertions, 0 deletions
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c new file mode 100644 index 000000000..1641868c3 --- /dev/null +++ b/drivers/power/supply/axp288_fuel_gauge.c @@ -0,0 +1,899 @@ +/* + * axp288_fuel_gauge.c - Xpower AXP288 PMIC Fuel Gauge Driver + * + * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2014 Intel Corporation + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include <linux/dmi.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/regmap.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/mfd/axp20x.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/iio/consumer.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <asm/unaligned.h> + +#define PS_STAT_VBUS_TRIGGER (1 << 0) +#define PS_STAT_BAT_CHRG_DIR (1 << 2) +#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3) +#define PS_STAT_VBUS_VALID (1 << 4) +#define PS_STAT_VBUS_PRESENT (1 << 5) + +#define CHRG_STAT_BAT_SAFE_MODE (1 << 3) +#define CHRG_STAT_BAT_VALID (1 << 4) +#define CHRG_STAT_BAT_PRESENT (1 << 5) +#define CHRG_STAT_CHARGING (1 << 6) +#define CHRG_STAT_PMIC_OTP (1 << 7) + +#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */ +#define CHRG_CCCV_CC_BIT_POS 0 +#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */ +#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */ +#define CHRG_CCCV_ITERM_20P (1 << 4) /* 20% of CC */ +#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */ +#define CHRG_CCCV_CV_BIT_POS 5 +#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */ +#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */ +#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */ +#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */ +#define CHRG_CCCV_CHG_EN (1 << 7) + +#define FG_CNTL_OCV_ADJ_STAT (1 << 2) +#define FG_CNTL_OCV_ADJ_EN (1 << 3) +#define FG_CNTL_CAP_ADJ_STAT (1 << 4) +#define FG_CNTL_CAP_ADJ_EN (1 << 5) +#define FG_CNTL_CC_EN (1 << 6) +#define FG_CNTL_GAUGE_EN (1 << 7) + +#define FG_15BIT_WORD_VALID (1 << 15) +#define FG_15BIT_VAL_MASK 0x7fff + +#define FG_REP_CAP_VALID (1 << 7) +#define FG_REP_CAP_VAL_MASK 0x7F + +#define FG_DES_CAP1_VALID (1 << 7) +#define FG_DES_CAP_RES_LSB 1456 /* 1.456mAhr */ + +#define FG_DES_CC_RES_LSB 1456 /* 1.456mAhr */ + +#define FG_OCV_CAP_VALID (1 << 7) +#define FG_OCV_CAP_VAL_MASK 0x7F +#define FG_CC_CAP_VALID (1 << 7) +#define FG_CC_CAP_VAL_MASK 0x7F + +#define FG_LOW_CAP_THR1_MASK 0xf0 /* 5% tp 20% */ +#define FG_LOW_CAP_THR1_VAL 0xa0 /* 15 perc */ +#define FG_LOW_CAP_THR2_MASK 0x0f /* 0% to 15% */ +#define FG_LOW_CAP_WARN_THR 14 /* 14 perc */ +#define FG_LOW_CAP_CRIT_THR 4 /* 4 perc */ +#define FG_LOW_CAP_SHDN_THR 0 /* 0 perc */ + +#define NR_RETRY_CNT 3 +#define DEV_NAME "axp288_fuel_gauge" + +/* 1.1mV per LSB expressed in uV */ +#define VOLTAGE_FROM_ADC(a) ((a * 11) / 10) +/* properties converted to uV, uA */ +#define PROP_VOLT(a) ((a) * 1000) +#define PROP_CURR(a) ((a) * 1000) + +#define AXP288_FG_INTR_NUM 6 +enum { + QWBTU_IRQ = 0, + WBTU_IRQ, + QWBTO_IRQ, + WBTO_IRQ, + WL2_IRQ, + WL1_IRQ, +}; + +enum { + BAT_TEMP = 0, + PMIC_TEMP, + SYSTEM_TEMP, + BAT_CHRG_CURR, + BAT_D_CURR, + BAT_VOLT, + IIO_CHANNEL_NUM +}; + +struct axp288_fg_info { + struct platform_device *pdev; + struct regmap *regmap; + struct regmap_irq_chip_data *regmap_irqc; + int irq[AXP288_FG_INTR_NUM]; + struct iio_channel *iio_channel[IIO_CHANNEL_NUM]; + struct power_supply *bat; + struct mutex lock; + int status; + int max_volt; + struct dentry *debug_file; +}; + +static enum power_supply_property fuel_gauge_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_OCV, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, +}; + +static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg) +{ + int ret, i; + unsigned int val; + + for (i = 0; i < NR_RETRY_CNT; i++) { + ret = regmap_read(info->regmap, reg, &val); + if (ret == -EBUSY) + continue; + else + break; + } + + if (ret < 0) { + dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", reg, ret); + return ret; + } + + return val; +} + +static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val) +{ + int ret; + + ret = regmap_write(info->regmap, reg, (unsigned int)val); + + if (ret < 0) + dev_err(&info->pdev->dev, "Error writing reg 0x%02x err: %d\n", reg, ret); + + return ret; +} + +static int fuel_gauge_read_15bit_word(struct axp288_fg_info *info, int reg) +{ + unsigned char buf[2]; + int ret; + + ret = regmap_bulk_read(info->regmap, reg, buf, 2); + if (ret < 0) { + dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", + reg, ret); + return ret; + } + + ret = get_unaligned_be16(buf); + if (!(ret & FG_15BIT_WORD_VALID)) { + dev_err(&info->pdev->dev, "Error reg 0x%02x contents not valid\n", + reg); + return -ENXIO; + } + + return ret & FG_15BIT_VAL_MASK; +} + +static int fuel_gauge_read_12bit_word(struct axp288_fg_info *info, int reg) +{ + unsigned char buf[2]; + int ret; + + ret = regmap_bulk_read(info->regmap, reg, buf, 2); + if (ret < 0) { + dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", + reg, ret); + return ret; + } + + /* 12-bit data values have upper 8 bits in buf[0], lower 4 in buf[1] */ + return (buf[0] << 4) | ((buf[1] >> 4) & 0x0f); +} + +#ifdef CONFIG_DEBUG_FS +static int fuel_gauge_debug_show(struct seq_file *s, void *data) +{ + struct axp288_fg_info *info = s->private; + int raw_val, ret; + + seq_printf(s, " PWR_STATUS[%02x] : %02x\n", + AXP20X_PWR_INPUT_STATUS, + fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS)); + seq_printf(s, "PWR_OP_MODE[%02x] : %02x\n", + AXP20X_PWR_OP_MODE, + fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE)); + seq_printf(s, " CHRG_CTRL1[%02x] : %02x\n", + AXP20X_CHRG_CTRL1, + fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1)); + seq_printf(s, " VLTF[%02x] : %02x\n", + AXP20X_V_LTF_DISCHRG, + fuel_gauge_reg_readb(info, AXP20X_V_LTF_DISCHRG)); + seq_printf(s, " VHTF[%02x] : %02x\n", + AXP20X_V_HTF_DISCHRG, + fuel_gauge_reg_readb(info, AXP20X_V_HTF_DISCHRG)); + seq_printf(s, " CC_CTRL[%02x] : %02x\n", + AXP20X_CC_CTRL, + fuel_gauge_reg_readb(info, AXP20X_CC_CTRL)); + seq_printf(s, "BATTERY CAP[%02x] : %02x\n", + AXP20X_FG_RES, + fuel_gauge_reg_readb(info, AXP20X_FG_RES)); + seq_printf(s, " FG_RDC1[%02x] : %02x\n", + AXP288_FG_RDC1_REG, + fuel_gauge_reg_readb(info, AXP288_FG_RDC1_REG)); + seq_printf(s, " FG_RDC0[%02x] : %02x\n", + AXP288_FG_RDC0_REG, + fuel_gauge_reg_readb(info, AXP288_FG_RDC0_REG)); + seq_printf(s, " FG_OCV[%02x] : %04x\n", + AXP288_FG_OCVH_REG, + fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG)); + seq_printf(s, " FG_DES_CAP[%02x] : %04x\n", + AXP288_FG_DES_CAP1_REG, + fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG)); + seq_printf(s, " FG_CC_MTR[%02x] : %04x\n", + AXP288_FG_CC_MTR1_REG, + fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG)); + seq_printf(s, " FG_OCV_CAP[%02x] : %02x\n", + AXP288_FG_OCV_CAP_REG, + fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG)); + seq_printf(s, " FG_CC_CAP[%02x] : %02x\n", + AXP288_FG_CC_CAP_REG, + fuel_gauge_reg_readb(info, AXP288_FG_CC_CAP_REG)); + seq_printf(s, " FG_LOW_CAP[%02x] : %02x\n", + AXP288_FG_LOW_CAP_REG, + fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG)); + seq_printf(s, "TUNING_CTL0[%02x] : %02x\n", + AXP288_FG_TUNE0, + fuel_gauge_reg_readb(info, AXP288_FG_TUNE0)); + seq_printf(s, "TUNING_CTL1[%02x] : %02x\n", + AXP288_FG_TUNE1, + fuel_gauge_reg_readb(info, AXP288_FG_TUNE1)); + seq_printf(s, "TUNING_CTL2[%02x] : %02x\n", + AXP288_FG_TUNE2, + fuel_gauge_reg_readb(info, AXP288_FG_TUNE2)); + seq_printf(s, "TUNING_CTL3[%02x] : %02x\n", + AXP288_FG_TUNE3, + fuel_gauge_reg_readb(info, AXP288_FG_TUNE3)); + seq_printf(s, "TUNING_CTL4[%02x] : %02x\n", + AXP288_FG_TUNE4, + fuel_gauge_reg_readb(info, AXP288_FG_TUNE4)); + seq_printf(s, "TUNING_CTL5[%02x] : %02x\n", + AXP288_FG_TUNE5, + fuel_gauge_reg_readb(info, AXP288_FG_TUNE5)); + + ret = iio_read_channel_raw(info->iio_channel[BAT_TEMP], &raw_val); + if (ret >= 0) + seq_printf(s, "axp288-batttemp : %d\n", raw_val); + ret = iio_read_channel_raw(info->iio_channel[PMIC_TEMP], &raw_val); + if (ret >= 0) + seq_printf(s, "axp288-pmictemp : %d\n", raw_val); + ret = iio_read_channel_raw(info->iio_channel[SYSTEM_TEMP], &raw_val); + if (ret >= 0) + seq_printf(s, "axp288-systtemp : %d\n", raw_val); + ret = iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], &raw_val); + if (ret >= 0) + seq_printf(s, "axp288-chrgcurr : %d\n", raw_val); + ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &raw_val); + if (ret >= 0) + seq_printf(s, "axp288-dchrgcur : %d\n", raw_val); + ret = iio_read_channel_raw(info->iio_channel[BAT_VOLT], &raw_val); + if (ret >= 0) + seq_printf(s, "axp288-battvolt : %d\n", raw_val); + + return 0; +} + +static int debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, fuel_gauge_debug_show, inode->i_private); +} + +static const struct file_operations fg_debug_fops = { + .open = debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void fuel_gauge_create_debugfs(struct axp288_fg_info *info) +{ + info->debug_file = debugfs_create_file("fuelgauge", 0666, NULL, + info, &fg_debug_fops); +} + +static void fuel_gauge_remove_debugfs(struct axp288_fg_info *info) +{ + debugfs_remove(info->debug_file); +} +#else +static inline void fuel_gauge_create_debugfs(struct axp288_fg_info *info) +{ +} +static inline void fuel_gauge_remove_debugfs(struct axp288_fg_info *info) +{ +} +#endif + +static void fuel_gauge_get_status(struct axp288_fg_info *info) +{ + int pwr_stat, fg_res, curr, ret; + + pwr_stat = fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS); + if (pwr_stat < 0) { + dev_err(&info->pdev->dev, + "PWR STAT read failed:%d\n", pwr_stat); + return; + } + + /* Report full if Vbus is valid and the reported capacity is 100% */ + if (!(pwr_stat & PS_STAT_VBUS_VALID)) + goto not_full; + + fg_res = fuel_gauge_reg_readb(info, AXP20X_FG_RES); + if (fg_res < 0) { + dev_err(&info->pdev->dev, "FG RES read failed: %d\n", fg_res); + return; + } + if (!(fg_res & FG_REP_CAP_VALID)) + goto not_full; + + fg_res &= ~FG_REP_CAP_VALID; + if (fg_res == 100) { + info->status = POWER_SUPPLY_STATUS_FULL; + return; + } + + /* + * Sometimes the charger turns itself off before fg-res reaches 100%. + * When this happens the AXP288 reports a not-charging status and + * 0 mA discharge current. + */ + if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR)) + goto not_full; + + ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &curr); + if (ret < 0) { + dev_err(&info->pdev->dev, "FG get current failed: %d\n", ret); + return; + } + if (curr == 0) { + info->status = POWER_SUPPLY_STATUS_FULL; + return; + } + +not_full: + if (pwr_stat & PS_STAT_BAT_CHRG_DIR) + info->status = POWER_SUPPLY_STATUS_CHARGING; + else + info->status = POWER_SUPPLY_STATUS_DISCHARGING; +} + +static int fuel_gauge_get_vbatt(struct axp288_fg_info *info, int *vbatt) +{ + int ret = 0, raw_val; + + ret = iio_read_channel_raw(info->iio_channel[BAT_VOLT], &raw_val); + if (ret < 0) + goto vbatt_read_fail; + + *vbatt = VOLTAGE_FROM_ADC(raw_val); +vbatt_read_fail: + return ret; +} + +static int fuel_gauge_get_current(struct axp288_fg_info *info, int *cur) +{ + int ret, discharge; + + /* First check discharge current, so that we do only 1 read on bat. */ + ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &discharge); + if (ret < 0) + return ret; + + if (discharge > 0) { + *cur = -1 * discharge; + return 0; + } + + return iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], cur); +} + +static int fuel_gauge_get_vocv(struct axp288_fg_info *info, int *vocv) +{ + int ret; + + ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG); + if (ret >= 0) + *vocv = VOLTAGE_FROM_ADC(ret); + + return ret; +} + +static int fuel_gauge_battery_health(struct axp288_fg_info *info) +{ + int ret, vocv, health = POWER_SUPPLY_HEALTH_UNKNOWN; + + ret = fuel_gauge_get_vocv(info, &vocv); + if (ret < 0) + goto health_read_fail; + + if (vocv > info->max_volt) + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + health = POWER_SUPPLY_HEALTH_GOOD; + +health_read_fail: + return health; +} + +static int fuel_gauge_get_property(struct power_supply *ps, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct axp288_fg_info *info = power_supply_get_drvdata(ps); + int ret = 0, value; + + mutex_lock(&info->lock); + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + fuel_gauge_get_status(info); + val->intval = info->status; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = fuel_gauge_battery_health(info); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = fuel_gauge_get_vbatt(info, &value); + if (ret < 0) + goto fuel_gauge_read_err; + val->intval = PROP_VOLT(value); + break; + case POWER_SUPPLY_PROP_VOLTAGE_OCV: + ret = fuel_gauge_get_vocv(info, &value); + if (ret < 0) + goto fuel_gauge_read_err; + val->intval = PROP_VOLT(value); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = fuel_gauge_get_current(info, &value); + if (ret < 0) + goto fuel_gauge_read_err; + val->intval = PROP_CURR(value); + break; + case POWER_SUPPLY_PROP_PRESENT: + ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE); + if (ret < 0) + goto fuel_gauge_read_err; + + if (ret & CHRG_STAT_BAT_PRESENT) + val->intval = 1; + else + val->intval = 0; + break; + case POWER_SUPPLY_PROP_CAPACITY: + ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES); + if (ret < 0) + goto fuel_gauge_read_err; + + if (!(ret & FG_REP_CAP_VALID)) + dev_err(&info->pdev->dev, + "capacity measurement not valid\n"); + val->intval = (ret & FG_REP_CAP_VAL_MASK); + break; + case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN: + ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG); + if (ret < 0) + goto fuel_gauge_read_err; + val->intval = (ret & 0x0f); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + ret = fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG); + if (ret < 0) + goto fuel_gauge_read_err; + + val->intval = ret * FG_DES_CAP_RES_LSB; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + ret = fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG); + if (ret < 0) + goto fuel_gauge_read_err; + + val->intval = ret * FG_DES_CAP_RES_LSB; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = PROP_VOLT(info->max_volt); + break; + default: + mutex_unlock(&info->lock); + return -EINVAL; + } + + mutex_unlock(&info->lock); + return 0; + +fuel_gauge_read_err: + mutex_unlock(&info->lock); + return ret; +} + +static int fuel_gauge_set_property(struct power_supply *ps, + enum power_supply_property prop, + const union power_supply_propval *val) +{ + struct axp288_fg_info *info = power_supply_get_drvdata(ps); + int ret = 0; + + mutex_lock(&info->lock); + switch (prop) { + case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN: + if ((val->intval < 0) || (val->intval > 15)) { + ret = -EINVAL; + break; + } + ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG); + if (ret < 0) + break; + ret &= 0xf0; + ret |= (val->intval & 0xf); + ret = fuel_gauge_reg_writeb(info, AXP288_FG_LOW_CAP_REG, ret); + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&info->lock); + return ret; +} + +static int fuel_gauge_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + +static irqreturn_t fuel_gauge_thread_handler(int irq, void *dev) +{ + struct axp288_fg_info *info = dev; + int i; + + for (i = 0; i < AXP288_FG_INTR_NUM; i++) { + if (info->irq[i] == irq) + break; + } + + if (i >= AXP288_FG_INTR_NUM) { + dev_warn(&info->pdev->dev, "spurious interrupt!!\n"); + return IRQ_NONE; + } + + switch (i) { + case QWBTU_IRQ: + dev_info(&info->pdev->dev, + "Quit Battery under temperature in work mode IRQ (QWBTU)\n"); + break; + case WBTU_IRQ: + dev_info(&info->pdev->dev, + "Battery under temperature in work mode IRQ (WBTU)\n"); + break; + case QWBTO_IRQ: + dev_info(&info->pdev->dev, + "Quit Battery over temperature in work mode IRQ (QWBTO)\n"); + break; + case WBTO_IRQ: + dev_info(&info->pdev->dev, + "Battery over temperature in work mode IRQ (WBTO)\n"); + break; + case WL2_IRQ: + dev_info(&info->pdev->dev, "Low Batt Warning(2) INTR\n"); + break; + case WL1_IRQ: + dev_info(&info->pdev->dev, "Low Batt Warning(1) INTR\n"); + break; + default: + dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n"); + } + + power_supply_changed(info->bat); + return IRQ_HANDLED; +} + +static void fuel_gauge_external_power_changed(struct power_supply *psy) +{ + struct axp288_fg_info *info = power_supply_get_drvdata(psy); + + power_supply_changed(info->bat); +} + +static const struct power_supply_desc fuel_gauge_desc = { + .name = DEV_NAME, + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = fuel_gauge_props, + .num_properties = ARRAY_SIZE(fuel_gauge_props), + .get_property = fuel_gauge_get_property, + .set_property = fuel_gauge_set_property, + .property_is_writeable = fuel_gauge_property_is_writeable, + .external_power_changed = fuel_gauge_external_power_changed, +}; + +static void fuel_gauge_init_irq(struct axp288_fg_info *info) +{ + int ret, i, pirq; + + for (i = 0; i < AXP288_FG_INTR_NUM; i++) { + pirq = platform_get_irq(info->pdev, i); + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); + if (info->irq[i] < 0) { + dev_warn(&info->pdev->dev, + "regmap_irq get virq failed for IRQ %d: %d\n", + pirq, info->irq[i]); + info->irq[i] = -1; + goto intr_failed; + } + ret = request_threaded_irq(info->irq[i], + NULL, fuel_gauge_thread_handler, + IRQF_ONESHOT, DEV_NAME, info); + if (ret) { + dev_warn(&info->pdev->dev, + "request irq failed for IRQ %d: %d\n", + pirq, info->irq[i]); + info->irq[i] = -1; + goto intr_failed; + } else { + dev_info(&info->pdev->dev, "HW IRQ %d -> VIRQ %d\n", + pirq, info->irq[i]); + } + } + return; + +intr_failed: + for (; i > 0; i--) { + free_irq(info->irq[i - 1], info); + info->irq[i - 1] = -1; + } +} + +/* + * Some devices have no battery (HDMI sticks) and the axp288 battery's + * detection reports one despite it not being there. + */ +static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = { + { + /* ACEPC T8 Cherry Trail Z8350 mini PC */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T8"), + /* also match on somewhat unique bios-version */ + DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"), + }, + }, + { + /* ACEPC T11 Cherry Trail Z8350 mini PC */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T11"), + /* also match on somewhat unique bios-version */ + DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"), + }, + }, + { + /* Intel Cherry Trail Compute Stick, Windows version */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "STK1AW32SC"), + }, + }, + { + /* Intel Cherry Trail Compute Stick, version without an OS */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"), + }, + }, + { + /* Meegopad T08 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Default string"), + DMI_MATCH(DMI_BOARD_VENDOR, "To be filled by OEM."), + DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"), + DMI_MATCH(DMI_BOARD_VERSION, "V1.1"), + }, + }, + { + /* ECS EF20EA */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"), + }, + }, + {} +}; + +static int axp288_fuel_gauge_probe(struct platform_device *pdev) +{ + int i, ret = 0; + struct axp288_fg_info *info; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct power_supply_config psy_cfg = {}; + static const char * const iio_chan_name[] = { + [BAT_TEMP] = "axp288-batt-temp", + [PMIC_TEMP] = "axp288-pmic-temp", + [SYSTEM_TEMP] = "axp288-system-temp", + [BAT_CHRG_CURR] = "axp288-chrg-curr", + [BAT_D_CURR] = "axp288-chrg-d-curr", + [BAT_VOLT] = "axp288-batt-volt", + }; + unsigned int val; + + if (dmi_check_system(axp288_fuel_gauge_blacklist)) + return -ENODEV; + + /* + * On some devices the fuelgauge and charger parts of the axp288 are + * not used, check that the fuelgauge is enabled (CC_CTRL != 0). + */ + ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val); + if (ret < 0) + return ret; + if (val == 0) + return -ENODEV; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdev = pdev; + info->regmap = axp20x->regmap; + info->regmap_irqc = axp20x->regmap_irqc; + info->status = POWER_SUPPLY_STATUS_UNKNOWN; + + platform_set_drvdata(pdev, info); + + mutex_init(&info->lock); + + for (i = 0; i < IIO_CHANNEL_NUM; i++) { + /* + * Note cannot use devm_iio_channel_get because x86 systems + * lack the device<->channel maps which iio_channel_get will + * try to use when passed a non NULL device pointer. + */ + info->iio_channel[i] = + iio_channel_get(NULL, iio_chan_name[i]); + if (IS_ERR(info->iio_channel[i])) { + ret = PTR_ERR(info->iio_channel[i]); + dev_dbg(&pdev->dev, "error getting iiochan %s: %d\n", + iio_chan_name[i], ret); + /* Wait for axp288_adc to load */ + if (ret == -ENODEV) + ret = -EPROBE_DEFER; + + goto out_free_iio_chan; + } + } + + ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG); + if (ret < 0) + goto out_free_iio_chan; + + if (!(ret & FG_DES_CAP1_VALID)) { + dev_err(&pdev->dev, "axp288 not configured by firmware\n"); + ret = -ENODEV; + goto out_free_iio_chan; + } + + ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1); + if (ret < 0) + goto out_free_iio_chan; + switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) { + case CHRG_CCCV_CV_4100MV: + info->max_volt = 4100; + break; + case CHRG_CCCV_CV_4150MV: + info->max_volt = 4150; + break; + case CHRG_CCCV_CV_4200MV: + info->max_volt = 4200; + break; + case CHRG_CCCV_CV_4350MV: + info->max_volt = 4350; + break; + } + + psy_cfg.drv_data = info; + info->bat = power_supply_register(&pdev->dev, &fuel_gauge_desc, &psy_cfg); + if (IS_ERR(info->bat)) { + ret = PTR_ERR(info->bat); + dev_err(&pdev->dev, "failed to register battery: %d\n", ret); + goto out_free_iio_chan; + } + + fuel_gauge_create_debugfs(info); + fuel_gauge_init_irq(info); + + return 0; + +out_free_iio_chan: + for (i = 0; i < IIO_CHANNEL_NUM; i++) + if (!IS_ERR_OR_NULL(info->iio_channel[i])) + iio_channel_release(info->iio_channel[i]); + + return ret; +} + +static const struct platform_device_id axp288_fg_id_table[] = { + { .name = DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(platform, axp288_fg_id_table); + +static int axp288_fuel_gauge_remove(struct platform_device *pdev) +{ + struct axp288_fg_info *info = platform_get_drvdata(pdev); + int i; + + power_supply_unregister(info->bat); + fuel_gauge_remove_debugfs(info); + + for (i = 0; i < AXP288_FG_INTR_NUM; i++) + if (info->irq[i] >= 0) + free_irq(info->irq[i], info); + + for (i = 0; i < IIO_CHANNEL_NUM; i++) + iio_channel_release(info->iio_channel[i]); + + return 0; +} + +static struct platform_driver axp288_fuel_gauge_driver = { + .probe = axp288_fuel_gauge_probe, + .remove = axp288_fuel_gauge_remove, + .id_table = axp288_fg_id_table, + .driver = { + .name = DEV_NAME, + }, +}; + +module_platform_driver(axp288_fuel_gauge_driver); + +MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>"); +MODULE_AUTHOR("Todd Brandt <todd.e.brandt@linux.intel.com>"); +MODULE_DESCRIPTION("Xpower AXP288 Fuel Gauge Driver"); +MODULE_LICENSE("GPL"); |