diff options
Diffstat (limited to 'drivers/scsi/3w-sas.c')
| -rw-r--r-- | drivers/scsi/3w-sas.c | 1885 |
1 files changed, 1885 insertions, 0 deletions
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c new file mode 100644 index 000000000..40c1e6e64 --- /dev/null +++ b/drivers/scsi/3w-sas.c @@ -0,0 +1,1885 @@ +/* + 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux. + + Written By: Adam Radford <aradford@gmail.com> + + Copyright (C) 2009 LSI Corporation. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Controllers supported by this driver: + + LSI 3ware 9750 6Gb/s SAS/SATA-RAID + + Bugs/Comments/Suggestions should be mailed to: + aradford@gmail.com + + History + ------- + 3.26.02.000 - Initial driver release. +*/ + +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/time.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/uaccess.h> +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_cmnd.h> +#include "3w-sas.h" + +/* Globals */ +#define TW_DRIVER_VERSION "3.26.02.000" +static DEFINE_MUTEX(twl_chrdev_mutex); +static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT]; +static unsigned int twl_device_extension_count; +static int twl_major = -1; +extern struct timezone sys_tz; + +/* Module parameters */ +MODULE_AUTHOR ("LSI"); +MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(TW_DRIVER_VERSION); + +static int use_msi; +module_param(use_msi, int, S_IRUGO); +MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0"); + +/* Function prototypes */ +static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset); + +/* Functions */ + +/* This function returns AENs through sysfs */ +static ssize_t twl_sysfs_aen_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *outbuf, loff_t offset, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct Scsi_Host *shost = class_to_shost(dev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; + unsigned long flags = 0; + ssize_t ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + spin_lock_irqsave(tw_dev->host->host_lock, flags); + ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH); + spin_unlock_irqrestore(tw_dev->host->host_lock, flags); + + return ret; +} /* End twl_sysfs_aen_read() */ + +/* aen_read sysfs attribute initializer */ +static struct bin_attribute twl_sysfs_aen_read_attr = { + .attr = { + .name = "3ware_aen_read", + .mode = S_IRUSR, + }, + .size = 0, + .read = twl_sysfs_aen_read +}; + +/* This function returns driver compatibility info through sysfs */ +static ssize_t twl_sysfs_compat_info(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *outbuf, loff_t offset, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct Scsi_Host *shost = class_to_shost(dev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; + unsigned long flags = 0; + ssize_t ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + spin_lock_irqsave(tw_dev->host->host_lock, flags); + ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info)); + spin_unlock_irqrestore(tw_dev->host->host_lock, flags); + + return ret; +} /* End twl_sysfs_compat_info() */ + +/* compat_info sysfs attribute initializer */ +static struct bin_attribute twl_sysfs_compat_info_attr = { + .attr = { + .name = "3ware_compat_info", + .mode = S_IRUSR, + }, + .size = 0, + .read = twl_sysfs_compat_info +}; + +/* Show some statistics about the card */ +static ssize_t twl_show_stats(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *host = class_to_shost(dev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + unsigned long flags = 0; + ssize_t len; + + spin_lock_irqsave(tw_dev->host->host_lock, flags); + len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n" + "Current commands posted: %4d\n" + "Max commands posted: %4d\n" + "Last sgl length: %4d\n" + "Max sgl length: %4d\n" + "Last sector count: %4d\n" + "Max sector count: %4d\n" + "SCSI Host Resets: %4d\n" + "AEN's: %4d\n", + TW_DRIVER_VERSION, + tw_dev->posted_request_count, + tw_dev->max_posted_request_count, + tw_dev->sgl_entries, + tw_dev->max_sgl_entries, + tw_dev->sector_count, + tw_dev->max_sector_count, + tw_dev->num_resets, + tw_dev->aen_count); + spin_unlock_irqrestore(tw_dev->host->host_lock, flags); + return len; +} /* End twl_show_stats() */ + +/* stats sysfs attribute initializer */ +static struct device_attribute twl_host_stats_attr = { + .attr = { + .name = "3ware_stats", + .mode = S_IRUGO, + }, + .show = twl_show_stats +}; + +/* Host attributes initializer */ +static struct device_attribute *twl_host_attrs[] = { + &twl_host_stats_attr, + NULL, +}; + +/* This function will look up an AEN severity string */ +static char *twl_aen_severity_lookup(unsigned char severity_code) +{ + char *retval = NULL; + + if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) || + (severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG)) + goto out; + + retval = twl_aen_severity_table[severity_code]; +out: + return retval; +} /* End twl_aen_severity_lookup() */ + +/* This function will queue an event */ +static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header) +{ + u32 local_time; + TW_Event *event; + unsigned short aen; + char host[16]; + char *error_str; + + tw_dev->aen_count++; + + /* Fill out event info */ + event = tw_dev->event_queue[tw_dev->error_index]; + + host[0] = '\0'; + if (tw_dev->host) + sprintf(host, " scsi%d:", tw_dev->host->host_no); + + aen = le16_to_cpu(header->status_block.error); + memset(event, 0, sizeof(TW_Event)); + + event->severity = TW_SEV_OUT(header->status_block.severity__reserved); + /* event->time_stamp_sec overflows in y2106 */ + local_time = (u32)(ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60)); + event->time_stamp_sec = local_time; + event->aen_code = aen; + event->retrieved = TW_AEN_NOT_RETRIEVED; + event->sequence_id = tw_dev->error_sequence_id; + tw_dev->error_sequence_id++; + + /* Check for embedded error string */ + error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]); + + header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0'; + event->parameter_len = strlen(header->err_specific_desc); + memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str)); + if (event->severity != TW_AEN_SEVERITY_DEBUG) + printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", + host, + twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)), + TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str, + header->err_specific_desc); + else + tw_dev->aen_count--; + + tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH; +} /* End twl_aen_queue_event() */ + +/* This function will attempt to post a command packet to the board */ +static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id) +{ + dma_addr_t command_que_value; + + command_que_value = tw_dev->command_packet_phys[request_id]; + command_que_value += TW_COMMAND_OFFSET; + + /* First write upper 4 bytes */ + writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev)); + /* Then the lower 4 bytes */ + writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev)); + + tw_dev->state[request_id] = TW_S_POSTED; + tw_dev->posted_request_count++; + if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) + tw_dev->max_posted_request_count = tw_dev->posted_request_count; + + return 0; +} /* End twl_post_command_packet() */ + +/* This function hands scsi cdb's to the firmware */ +static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg) +{ + TW_Command_Full *full_command_packet; + TW_Command_Apache *command_packet; + int i, sg_count; + struct scsi_cmnd *srb = NULL; + struct scatterlist *sglist = NULL, *sg; + int retval = 1; + + if (tw_dev->srb[request_id]) { + srb = tw_dev->srb[request_id]; + if (scsi_sglist(srb)) + sglist = scsi_sglist(srb); + } + + /* Initialize command packet */ + full_command_packet = tw_dev->command_packet_virt[request_id]; + full_command_packet->header.header_desc.size_header = 128; + full_command_packet->header.status_block.error = 0; + full_command_packet->header.status_block.severity__reserved = 0; + + command_packet = &full_command_packet->command.newcommand; + command_packet->status = 0; + command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI); + + /* We forced 16 byte cdb use earlier */ + if (!cdb) + memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN); + else + memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN); + + if (srb) { + command_packet->unit = srb->device->id; + command_packet->request_id__lunl = + cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id)); + } else { + command_packet->request_id__lunl = + cpu_to_le16(TW_REQ_LUN_IN(0, request_id)); + command_packet->unit = 0; + } + + command_packet->sgl_offset = 16; + + if (!sglistarg) { + /* Map sglist from scsi layer to cmd packet */ + if (scsi_sg_count(srb)) { + sg_count = scsi_dma_map(srb); + if (sg_count <= 0) + goto out; + + scsi_for_each_sg(srb, sg, sg_count, i) { + command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg)); + command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg)); + } + command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id]))); + } + } else { + /* Internal cdb post */ + for (i = 0; i < use_sg; i++) { + command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address); + command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length); + } + command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg)); + } + + /* Update some stats */ + if (srb) { + tw_dev->sector_count = scsi_bufflen(srb) / 512; + if (tw_dev->sector_count > tw_dev->max_sector_count) + tw_dev->max_sector_count = tw_dev->sector_count; + tw_dev->sgl_entries = scsi_sg_count(srb); + if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) + tw_dev->max_sgl_entries = tw_dev->sgl_entries; + } + + /* Now post the command to the board */ + retval = twl_post_command_packet(tw_dev, request_id); + +out: + return retval; +} /* End twl_scsiop_execute_scsi() */ + +/* This function will read the aen queue from the isr */ +static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) +{ + char cdb[TW_MAX_CDB_LEN]; + TW_SG_Entry_ISO sglist[1]; + TW_Command_Full *full_command_packet; + int retval = 1; + + full_command_packet = tw_dev->command_packet_virt[request_id]; + memset(full_command_packet, 0, sizeof(TW_Command_Full)); + + /* Initialize cdb */ + memset(&cdb, 0, TW_MAX_CDB_LEN); + cdb[0] = REQUEST_SENSE; /* opcode */ + cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ + + /* Initialize sglist */ + memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); + sglist[0].length = TW_SECTOR_SIZE; + sglist[0].address = tw_dev->generic_buffer_phys[request_id]; + + /* Mark internal command */ + tw_dev->srb[request_id] = NULL; + + /* Now post the command packet */ + if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue"); + goto out; + } + retval = 0; +out: + return retval; +} /* End twl_aen_read_queue() */ + +/* This function will sync firmware time with the host time */ +static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id) +{ + u32 schedulertime; + TW_Command_Full *full_command_packet; + TW_Command *command_packet; + TW_Param_Apache *param; + time64_t local_time; + + /* Fill out the command packet */ + full_command_packet = tw_dev->command_packet_virt[request_id]; + memset(full_command_packet, 0, sizeof(TW_Command_Full)); + command_packet = &full_command_packet->command.oldcommand; + command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM); + command_packet->request_id = request_id; + command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); + command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); + command_packet->size = TW_COMMAND_SIZE; + command_packet->byte6_offset.parameter_count = cpu_to_le16(1); + + /* Setup the param */ + param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; + memset(param, 0, TW_SECTOR_SIZE); + param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */ + param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */ + param->parameter_size_bytes = cpu_to_le16(4); + + /* Convert system time in UTC to local time seconds since last + Sunday 12:00AM */ + local_time = (ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60)); + div_u64_rem(local_time - (3 * 86400), 604800, &schedulertime); + schedulertime = cpu_to_le32(schedulertime); + + memcpy(param->data, &schedulertime, sizeof(u32)); + + /* Mark internal command */ + tw_dev->srb[request_id] = NULL; + + /* Now post the command */ + twl_post_command_packet(tw_dev, request_id); +} /* End twl_aen_sync_time() */ + +/* This function will assign an available request id */ +static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id) +{ + *request_id = tw_dev->free_queue[tw_dev->free_head]; + tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH; + tw_dev->state[*request_id] = TW_S_STARTED; +} /* End twl_get_request_id() */ + +/* This function will free a request id */ +static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id) +{ + tw_dev->free_queue[tw_dev->free_tail] = request_id; + tw_dev->state[request_id] = TW_S_FINISHED; + tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; +} /* End twl_free_request_id() */ + +/* This function will complete an aen request from the isr */ +static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id) +{ + TW_Command_Full *full_command_packet; + TW_Command *command_packet; + TW_Command_Apache_Header *header; + unsigned short aen; + int retval = 1; + + header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; + tw_dev->posted_request_count--; + aen = le16_to_cpu(header->status_block.error); + full_command_packet = tw_dev->command_packet_virt[request_id]; + command_packet = &full_command_packet->command.oldcommand; + + /* First check for internal completion of set param for time sync */ + if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) { + /* Keep reading the queue in case there are more aen's */ + if (twl_aen_read_queue(tw_dev, request_id)) + goto out2; + else { + retval = 0; + goto out; + } + } + + switch (aen) { + case TW_AEN_QUEUE_EMPTY: + /* Quit reading the queue if this is the last one */ + break; + case TW_AEN_SYNC_TIME_WITH_HOST: + twl_aen_sync_time(tw_dev, request_id); + retval = 0; + goto out; + default: + twl_aen_queue_event(tw_dev, header); + + /* If there are more aen's, keep reading the queue */ + if (twl_aen_read_queue(tw_dev, request_id)) + goto out2; + else { + retval = 0; + goto out; + } + } + retval = 0; +out2: + tw_dev->state[request_id] = TW_S_COMPLETED; + twl_free_request_id(tw_dev, request_id); + clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); +out: + return retval; +} /* End twl_aen_complete() */ + +/* This function will poll for a response */ +static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds) +{ + unsigned long before; + dma_addr_t mfa; + u32 regh, regl; + u32 response; + int retval = 1; + int found = 0; + + before = jiffies; + + while (!found) { + if (sizeof(dma_addr_t) > 4) { + regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); + regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); + mfa = ((u64)regh << 32) | regl; + } else + mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); + + response = (u32)mfa; + + if (TW_RESID_OUT(response) == request_id) + found = 1; + + if (time_after(jiffies, before + HZ * seconds)) + goto out; + + msleep(50); + } + retval = 0; +out: + return retval; +} /* End twl_poll_response() */ + +/* This function will drain the aen queue */ +static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset) +{ + int request_id = 0; + char cdb[TW_MAX_CDB_LEN]; + TW_SG_Entry_ISO sglist[1]; + int finished = 0, count = 0; + TW_Command_Full *full_command_packet; + TW_Command_Apache_Header *header; + unsigned short aen; + int first_reset = 0, queue = 0, retval = 1; + + if (no_check_reset) + first_reset = 0; + else + first_reset = 1; + + full_command_packet = tw_dev->command_packet_virt[request_id]; + memset(full_command_packet, 0, sizeof(TW_Command_Full)); + + /* Initialize cdb */ + memset(&cdb, 0, TW_MAX_CDB_LEN); + cdb[0] = REQUEST_SENSE; /* opcode */ + cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ + + /* Initialize sglist */ + memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); + sglist[0].length = TW_SECTOR_SIZE; + sglist[0].address = tw_dev->generic_buffer_phys[request_id]; + + /* Mark internal command */ + tw_dev->srb[request_id] = NULL; + + do { + /* Send command to the board */ + if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense"); + goto out; + } + + /* Now poll for completion */ + if (twl_poll_response(tw_dev, request_id, 30)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue"); + tw_dev->posted_request_count--; + goto out; + } + + tw_dev->posted_request_count--; + header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; + aen = le16_to_cpu(header->status_block.error); + queue = 0; + count++; + + switch (aen) { + case TW_AEN_QUEUE_EMPTY: + if (first_reset != 1) + goto out; + else + finished = 1; + break; + case TW_AEN_SOFT_RESET: + if (first_reset == 0) + first_reset = 1; + else + queue = 1; + break; + case TW_AEN_SYNC_TIME_WITH_HOST: + break; + default: + queue = 1; + } + + /* Now queue an event info */ + if (queue) + twl_aen_queue_event(tw_dev, header); + } while ((finished == 0) && (count < TW_MAX_AEN_DRAIN)); + + if (count == TW_MAX_AEN_DRAIN) + goto out; + + retval = 0; +out: + tw_dev->state[request_id] = TW_S_INITIAL; + return retval; +} /* End twl_aen_drain_queue() */ + +/* This function will allocate memory and check if it is correctly aligned */ +static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) +{ + int i; + dma_addr_t dma_handle; + unsigned long *cpu_addr; + int retval = 1; + + cpu_addr = pci_zalloc_consistent(tw_dev->tw_pci_dev, size * TW_Q_LENGTH, + &dma_handle); + if (!cpu_addr) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); + goto out; + } + + for (i = 0; i < TW_Q_LENGTH; i++) { + switch(which) { + case 0: + tw_dev->command_packet_phys[i] = dma_handle+(i*size); + tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size)); + break; + case 1: + tw_dev->generic_buffer_phys[i] = dma_handle+(i*size); + tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); + break; + case 2: + tw_dev->sense_buffer_phys[i] = dma_handle+(i*size); + tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size)); + break; + } + } + retval = 0; +out: + return retval; +} /* End twl_allocate_memory() */ + +/* This function will load the request id and various sgls for ioctls */ +static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length) +{ + TW_Command *oldcommand; + TW_Command_Apache *newcommand; + TW_SG_Entry_ISO *sgl; + unsigned int pae = 0; + + if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4)) + pae = 1; + + if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) { + newcommand = &full_command_packet->command.newcommand; + newcommand->request_id__lunl = + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); + if (length) { + newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); + newcommand->sg_list[0].length = TW_CPU_TO_SGL(length); + } + newcommand->sgl_entries__lunh = + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); + } else { + oldcommand = &full_command_packet->command.oldcommand; + oldcommand->request_id = request_id; + + if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) { + /* Load the sg list */ + sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0)); + sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); + sgl->length = TW_CPU_TO_SGL(length); + oldcommand->size += pae; + oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0; + } + } +} /* End twl_load_sgl() */ + +/* This function handles ioctl for the character device + This interface is used by smartmontools open source software */ +static long twl_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + long timeout; + unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0; + dma_addr_t dma_handle; + int request_id = 0; + TW_Ioctl_Driver_Command driver_command; + struct inode *inode = file_inode(file); + TW_Ioctl_Buf_Apache *tw_ioctl; + TW_Command_Full *full_command_packet; + TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)]; + int retval = -EFAULT; + void __user *argp = (void __user *)arg; + + mutex_lock(&twl_chrdev_mutex); + + /* Only let one of these through at a time */ + if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) { + retval = -EINTR; + goto out; + } + + /* First copy down the driver command */ + if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command))) + goto out2; + + /* Check data buffer size */ + if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) { + retval = -EINVAL; + goto out2; + } + + /* Hardware can only do multiple of 512 byte transfers */ + data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511; + + /* Now allocate ioctl buf memory */ + cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL); + if (!cpu_addr) { + retval = -ENOMEM; + goto out2; + } + + tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr; + + /* Now copy down the entire ioctl */ + if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1)) + goto out3; + + /* See which ioctl we are doing */ + switch (cmd) { + case TW_IOCTL_FIRMWARE_PASS_THROUGH: + spin_lock_irqsave(tw_dev->host->host_lock, flags); + twl_get_request_id(tw_dev, &request_id); + + /* Flag internal command */ + tw_dev->srb[request_id] = NULL; + + /* Flag chrdev ioctl */ + tw_dev->chrdev_request_id = request_id; + + full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command; + + /* Load request id and sglist for both command types */ + twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted); + + memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full)); + + /* Now post the command packet to the controller */ + twl_post_command_packet(tw_dev, request_id); + spin_unlock_irqrestore(tw_dev->host->host_lock, flags); + + timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ; + + /* Now wait for command to complete */ + timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout); + + /* We timed out, and didn't get an interrupt */ + if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) { + /* Now we need to reset the board */ + printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n", + tw_dev->host->host_no, TW_DRIVER, 0x6, + cmd); + retval = -EIO; + twl_reset_device_extension(tw_dev, 1); + goto out3; + } + + /* Now copy in the command packet response */ + memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full)); + + /* Now complete the io */ + spin_lock_irqsave(tw_dev->host->host_lock, flags); + tw_dev->posted_request_count--; + tw_dev->state[request_id] = TW_S_COMPLETED; + twl_free_request_id(tw_dev, request_id); + spin_unlock_irqrestore(tw_dev->host->host_lock, flags); + break; + default: + retval = -ENOTTY; + goto out3; + } + + /* Now copy the entire response to userspace */ + if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0) + retval = 0; +out3: + /* Now free ioctl buf memory */ + dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle); +out2: + mutex_unlock(&tw_dev->ioctl_lock); +out: + mutex_unlock(&twl_chrdev_mutex); + return retval; +} /* End twl_chrdev_ioctl() */ + +/* This function handles open for the character device */ +static int twl_chrdev_open(struct inode *inode, struct file *file) +{ + unsigned int minor_number; + int retval = -ENODEV; + + if (!capable(CAP_SYS_ADMIN)) { + retval = -EACCES; + goto out; + } + + minor_number = iminor(inode); + if (minor_number >= twl_device_extension_count) + goto out; + retval = 0; +out: + return retval; +} /* End twl_chrdev_open() */ + +/* File operations struct for character device */ +static const struct file_operations twl_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = twl_chrdev_ioctl, + .open = twl_chrdev_open, + .release = NULL, + .llseek = noop_llseek, +}; + +/* This function passes sense data from firmware to scsi layer */ +static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host) +{ + TW_Command_Apache_Header *header; + TW_Command_Full *full_command_packet; + unsigned short error; + char *error_str; + int retval = 1; + + header = tw_dev->sense_buffer_virt[i]; + full_command_packet = tw_dev->command_packet_virt[request_id]; + + /* Get embedded firmware error string */ + error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]); + + /* Don't print error for Logical unit not supported during rollcall */ + error = le16_to_cpu(header->status_block.error); + if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) { + if (print_host) + printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n", + tw_dev->host->host_no, + TW_MESSAGE_SOURCE_CONTROLLER_ERROR, + header->status_block.error, + error_str, + header->err_specific_desc); + else + printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n", + TW_MESSAGE_SOURCE_CONTROLLER_ERROR, + header->status_block.error, + error_str, + header->err_specific_desc); + } + + if (copy_sense) { + memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH); + tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1); + goto out; + } +out: + return retval; +} /* End twl_fill_sense() */ + +/* This function will free up device extension resources */ +static void twl_free_device_extension(TW_Device_Extension *tw_dev) +{ + if (tw_dev->command_packet_virt[0]) + pci_free_consistent(tw_dev->tw_pci_dev, + sizeof(TW_Command_Full)*TW_Q_LENGTH, + tw_dev->command_packet_virt[0], + tw_dev->command_packet_phys[0]); + + if (tw_dev->generic_buffer_virt[0]) + pci_free_consistent(tw_dev->tw_pci_dev, + TW_SECTOR_SIZE*TW_Q_LENGTH, + tw_dev->generic_buffer_virt[0], + tw_dev->generic_buffer_phys[0]); + + if (tw_dev->sense_buffer_virt[0]) + pci_free_consistent(tw_dev->tw_pci_dev, + sizeof(TW_Command_Apache_Header)* + TW_Q_LENGTH, + tw_dev->sense_buffer_virt[0], + tw_dev->sense_buffer_phys[0]); + + kfree(tw_dev->event_queue[0]); +} /* End twl_free_device_extension() */ + +/* This function will get parameter table entries from the firmware */ +static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) +{ + TW_Command_Full *full_command_packet; + TW_Command *command_packet; + TW_Param_Apache *param; + void *retval = NULL; + + /* Setup the command packet */ + full_command_packet = tw_dev->command_packet_virt[request_id]; + memset(full_command_packet, 0, sizeof(TW_Command_Full)); + command_packet = &full_command_packet->command.oldcommand; + + command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); + command_packet->size = TW_COMMAND_SIZE; + command_packet->request_id = request_id; + command_packet->byte6_offset.block_count = cpu_to_le16(1); + + /* Now setup the param */ + param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; + memset(param, 0, TW_SECTOR_SIZE); + param->table_id = cpu_to_le16(table_id | 0x8000); + param->parameter_id = cpu_to_le16(parameter_id); + param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes); + + command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); + command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); + + /* Post the command packet to the board */ + twl_post_command_packet(tw_dev, request_id); + + /* Poll for completion */ + if (twl_poll_response(tw_dev, request_id, 30)) + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param") + else + retval = (void *)&(param->data[0]); + + tw_dev->posted_request_count--; + tw_dev->state[request_id] = TW_S_INITIAL; + + return retval; +} /* End twl_get_param() */ + +/* This function will send an initconnection command to controller */ +static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits, + u32 set_features, unsigned short current_fw_srl, + unsigned short current_fw_arch_id, + unsigned short current_fw_branch, + unsigned short current_fw_build, + unsigned short *fw_on_ctlr_srl, + unsigned short *fw_on_ctlr_arch_id, + unsigned short *fw_on_ctlr_branch, + unsigned short *fw_on_ctlr_build, + u32 *init_connect_result) +{ + TW_Command_Full *full_command_packet; + TW_Initconnect *tw_initconnect; + int request_id = 0, retval = 1; + + /* Initialize InitConnection command packet */ + full_command_packet = tw_dev->command_packet_virt[request_id]; + memset(full_command_packet, 0, sizeof(TW_Command_Full)); + full_command_packet->header.header_desc.size_header = 128; + + tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand; + tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION); + tw_initconnect->request_id = request_id; + tw_initconnect->message_credits = cpu_to_le16(message_credits); + tw_initconnect->features = set_features; + + /* Turn on 64-bit sgl support if we need to */ + tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0; + + tw_initconnect->features = cpu_to_le32(tw_initconnect->features); + + if (set_features & TW_EXTENDED_INIT_CONNECT) { + tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED; + tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl); + tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id); + tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch); + tw_initconnect->fw_build = cpu_to_le16(current_fw_build); + } else + tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE; + + /* Send command packet to the board */ + twl_post_command_packet(tw_dev, request_id); + + /* Poll for completion */ + if (twl_poll_response(tw_dev, request_id, 30)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection"); + } else { + if (set_features & TW_EXTENDED_INIT_CONNECT) { + *fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl); + *fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id); + *fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch); + *fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build); + *init_connect_result = le32_to_cpu(tw_initconnect->result); + } + retval = 0; + } + + tw_dev->posted_request_count--; + tw_dev->state[request_id] = TW_S_INITIAL; + + return retval; +} /* End twl_initconnection() */ + +/* This function will initialize the fields of a device extension */ +static int twl_initialize_device_extension(TW_Device_Extension *tw_dev) +{ + int i, retval = 1; + + /* Initialize command packet buffers */ + if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed"); + goto out; + } + + /* Initialize generic buffer */ + if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed"); + goto out; + } + + /* Allocate sense buffers */ + if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed"); + goto out; + } + + /* Allocate event info space */ + tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL); + if (!tw_dev->event_queue[0]) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed"); + goto out; + } + + for (i = 0; i < TW_Q_LENGTH; i++) { + tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event))); + tw_dev->free_queue[i] = i; + tw_dev->state[i] = TW_S_INITIAL; + } + + tw_dev->free_head = TW_Q_START; + tw_dev->free_tail = TW_Q_START; + tw_dev->error_sequence_id = 1; + tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; + + mutex_init(&tw_dev->ioctl_lock); + init_waitqueue_head(&tw_dev->ioctl_wqueue); + + retval = 0; +out: + return retval; +} /* End twl_initialize_device_extension() */ + +/* This function will handle attention interrupts */ +static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev) +{ + int retval = 1; + u32 request_id, doorbell; + + /* Read doorbell status */ + doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev)); + + /* Check for controller errors */ + if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing"); + goto out; + } + + /* Check if we need to perform an AEN drain */ + if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) { + if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) { + twl_get_request_id(tw_dev, &request_id); + if (twl_aen_read_queue(tw_dev, request_id)) { + tw_dev->state[request_id] = TW_S_COMPLETED; + twl_free_request_id(tw_dev, request_id); + clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); + } + } + } + + retval = 0; +out: + /* Clear doorbell interrupt */ + TWL_CLEAR_DB_INTERRUPT(tw_dev); + + /* Make sure the clear was flushed by reading it back */ + readl(TWL_HOBDBC_REG_ADDR(tw_dev)); + + return retval; +} /* End twl_handle_attention_interrupt() */ + +/* Interrupt service routine */ +static irqreturn_t twl_interrupt(int irq, void *dev_instance) +{ + TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance; + int i, handled = 0, error = 0; + dma_addr_t mfa = 0; + u32 reg, regl, regh, response, request_id = 0; + struct scsi_cmnd *cmd; + TW_Command_Full *full_command_packet; + + spin_lock(tw_dev->host->host_lock); + + /* Read host interrupt status */ + reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); + + /* Check if this is our interrupt, otherwise bail */ + if (!(reg & TWL_HISTATUS_VALID_INTERRUPT)) + goto twl_interrupt_bail; + + handled = 1; + + /* If we are resetting, bail */ + if (test_bit(TW_IN_RESET, &tw_dev->flags)) + goto twl_interrupt_bail; + + /* Attention interrupt */ + if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) { + if (twl_handle_attention_interrupt(tw_dev)) { + TWL_MASK_INTERRUPTS(tw_dev); + goto twl_interrupt_bail; + } + } + + /* Response interrupt */ + while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) { + if (sizeof(dma_addr_t) > 4) { + regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); + regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); + mfa = ((u64)regh << 32) | regl; + } else + mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); + + error = 0; + response = (u32)mfa; + + /* Check for command packet error */ + if (!TW_NOTMFA_OUT(response)) { + for (i=0;i<TW_Q_LENGTH;i++) { + if (tw_dev->sense_buffer_phys[i] == mfa) { + request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id); + if (tw_dev->srb[request_id] != NULL) + error = twl_fill_sense(tw_dev, i, request_id, 1, 1); + else { + /* Skip ioctl error prints */ + if (request_id != tw_dev->chrdev_request_id) + error = twl_fill_sense(tw_dev, i, request_id, 0, 1); + else + memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header)); + } + + /* Now re-post the sense buffer */ + writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); + writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); + break; + } + } + } else + request_id = TW_RESID_OUT(response); + + full_command_packet = tw_dev->command_packet_virt[request_id]; + + /* Check for correct state */ + if (tw_dev->state[request_id] != TW_S_POSTED) { + if (tw_dev->srb[request_id] != NULL) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted"); + TWL_MASK_INTERRUPTS(tw_dev); + goto twl_interrupt_bail; + } + } + + /* Check for internal command completion */ + if (tw_dev->srb[request_id] == NULL) { + if (request_id != tw_dev->chrdev_request_id) { + if (twl_aen_complete(tw_dev, request_id)) + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt"); + } else { + tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; + wake_up(&tw_dev->ioctl_wqueue); + } + } else { + cmd = tw_dev->srb[request_id]; + + if (!error) + cmd->result = (DID_OK << 16); + + /* Report residual bytes for single sgl */ + if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) { + if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id])) + scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length); + } + + /* Now complete the io */ + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); + tw_dev->state[request_id] = TW_S_COMPLETED; + twl_free_request_id(tw_dev, request_id); + tw_dev->posted_request_count--; + } + + /* Check for another response interrupt */ + reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); + } + +twl_interrupt_bail: + spin_unlock(tw_dev->host->host_lock); + return IRQ_RETVAL(handled); +} /* End twl_interrupt() */ + +/* This function will poll for a register change */ +static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds) +{ + unsigned long before; + int retval = 1; + u32 reg_value; + + reg_value = readl(reg); + before = jiffies; + + while ((reg_value & value) != result) { + reg_value = readl(reg); + if (time_after(jiffies, before + HZ * seconds)) + goto out; + msleep(50); + } + retval = 0; +out: + return retval; +} /* End twl_poll_register() */ + +/* This function will reset a controller */ +static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) +{ + int retval = 1; + int i = 0; + u32 status = 0; + unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0; + unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0; + u32 init_connect_result = 0; + int tries = 0; + int do_soft_reset = soft_reset; + + while (tries < TW_MAX_RESET_TRIES) { + /* Do a soft reset if one is needed */ + if (do_soft_reset) { + TWL_SOFT_RESET(tw_dev); + + /* Make sure controller is in a good state */ + if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence"); + tries++; + continue; + } + if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence"); + tries++; + continue; + } + } + + /* Initconnect */ + if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS, + TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL, + TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH, + TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl, + &fw_on_ctlr_arch_id, &fw_on_ctlr_branch, + &fw_on_ctlr_build, &init_connect_result)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL"); + do_soft_reset = 1; + tries++; + continue; + } + + /* Load sense buffers */ + while (i < TW_Q_LENGTH) { + writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); + writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); + + /* Check status for over-run after each write */ + status = readl(TWL_STATUS_REG_ADDR(tw_dev)); + if (!(status & TWL_STATUS_OVERRUN_SUBMIT)) + i++; + } + + /* Now check status */ + status = readl(TWL_STATUS_REG_ADDR(tw_dev)); + if (status) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers"); + do_soft_reset = 1; + tries++; + continue; + } + + /* Drain the AEN queue */ + if (twl_aen_drain_queue(tw_dev, soft_reset)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence"); + do_soft_reset = 1; + tries++; + continue; + } + + /* Load rest of compatibility struct */ + strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION)); + tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL; + tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH; + tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD; + tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL; + tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH; + tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD; + tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl; + tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch; + tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build; + + /* If we got here, controller is in a good state */ + retval = 0; + goto out; + } +out: + return retval; +} /* End twl_reset_sequence() */ + +/* This function will reset a device extension */ +static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset) +{ + int i = 0, retval = 1; + unsigned long flags = 0; + + /* Block SCSI requests while we are resetting */ + if (ioctl_reset) + scsi_block_requests(tw_dev->host); + + set_bit(TW_IN_RESET, &tw_dev->flags); + TWL_MASK_INTERRUPTS(tw_dev); + TWL_CLEAR_DB_INTERRUPT(tw_dev); + + spin_lock_irqsave(tw_dev->host->host_lock, flags); + + /* Abort all requests that are in progress */ + for (i = 0; i < TW_Q_LENGTH; i++) { + if ((tw_dev->state[i] != TW_S_FINISHED) && + (tw_dev->state[i] != TW_S_INITIAL) && + (tw_dev->state[i] != TW_S_COMPLETED)) { + struct scsi_cmnd *cmd = tw_dev->srb[i]; + + if (cmd) { + cmd->result = (DID_RESET << 16); + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); + } + } + } + + /* Reset queues and counts */ + for (i = 0; i < TW_Q_LENGTH; i++) { + tw_dev->free_queue[i] = i; + tw_dev->state[i] = TW_S_INITIAL; + } + tw_dev->free_head = TW_Q_START; + tw_dev->free_tail = TW_Q_START; + tw_dev->posted_request_count = 0; + + spin_unlock_irqrestore(tw_dev->host->host_lock, flags); + + if (twl_reset_sequence(tw_dev, 1)) + goto out; + + TWL_UNMASK_INTERRUPTS(tw_dev); + + clear_bit(TW_IN_RESET, &tw_dev->flags); + tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; + + retval = 0; +out: + if (ioctl_reset) + scsi_unblock_requests(tw_dev->host); + return retval; +} /* End twl_reset_device_extension() */ + +/* This funciton returns unit geometry in cylinders/heads/sectors */ +static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) +{ + int heads, sectors; + TW_Device_Extension *tw_dev; + + tw_dev = (TW_Device_Extension *)sdev->host->hostdata; + + if (capacity >= 0x200000) { + heads = 255; + sectors = 63; + } else { + heads = 64; + sectors = 32; + } + + geom[0] = heads; + geom[1] = sectors; + geom[2] = sector_div(capacity, heads * sectors); /* cylinders */ + + return 0; +} /* End twl_scsi_biosparam() */ + +/* This is the new scsi eh reset function */ +static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt) +{ + TW_Device_Extension *tw_dev = NULL; + int retval = FAILED; + + tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; + + tw_dev->num_resets++; + + sdev_printk(KERN_WARNING, SCpnt->device, + "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n", + TW_DRIVER, 0x2c, SCpnt->cmnd[0]); + + /* Make sure we are not issuing an ioctl or resetting from ioctl */ + mutex_lock(&tw_dev->ioctl_lock); + + /* Now reset the card and some of the device extension data */ + if (twl_reset_device_extension(tw_dev, 0)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset"); + goto out; + } + + retval = SUCCESS; +out: + mutex_unlock(&tw_dev->ioctl_lock); + return retval; +} /* End twl_scsi_eh_reset() */ + +/* This is the main scsi queue function to handle scsi opcodes */ +static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +{ + int request_id, retval; + TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; + + /* If we are resetting due to timed out ioctl, report as busy */ + if (test_bit(TW_IN_RESET, &tw_dev->flags)) { + retval = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + /* Save done function into scsi_cmnd struct */ + SCpnt->scsi_done = done; + + /* Get a free request id */ + twl_get_request_id(tw_dev, &request_id); + + /* Save the scsi command for use by the ISR */ + tw_dev->srb[request_id] = SCpnt; + + retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL); + if (retval) { + tw_dev->state[request_id] = TW_S_COMPLETED; + twl_free_request_id(tw_dev, request_id); + SCpnt->result = (DID_ERROR << 16); + done(SCpnt); + retval = 0; + } +out: + return retval; +} /* End twl_scsi_queue() */ + +static DEF_SCSI_QCMD(twl_scsi_queue) + +/* This function tells the controller to shut down */ +static void __twl_shutdown(TW_Device_Extension *tw_dev) +{ + /* Disable interrupts */ + TWL_MASK_INTERRUPTS(tw_dev); + + /* Free up the IRQ */ + free_irq(tw_dev->tw_pci_dev->irq, tw_dev); + + printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no); + + /* Tell the card we are shutting down */ + if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed"); + } else { + printk(KERN_WARNING "3w-sas: Shutdown complete.\n"); + } + + /* Clear doorbell interrupt just before exit */ + TWL_CLEAR_DB_INTERRUPT(tw_dev); +} /* End __twl_shutdown() */ + +/* Wrapper for __twl_shutdown */ +static void twl_shutdown(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev; + + if (!host) + return; + + tw_dev = (TW_Device_Extension *)host->hostdata; + + if (tw_dev->online) + __twl_shutdown(tw_dev); +} /* End twl_shutdown() */ + +/* This function configures unit settings when a unit is coming on-line */ +static int twl_slave_configure(struct scsi_device *sdev) +{ + /* Force 60 second timeout */ + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); + + return 0; +} /* End twl_slave_configure() */ + +/* scsi_host_template initializer */ +static struct scsi_host_template driver_template = { + .module = THIS_MODULE, + .name = "3w-sas", + .queuecommand = twl_scsi_queue, + .eh_host_reset_handler = twl_scsi_eh_reset, + .bios_param = twl_scsi_biosparam, + .change_queue_depth = scsi_change_queue_depth, + .can_queue = TW_Q_LENGTH-2, + .slave_configure = twl_slave_configure, + .this_id = -1, + .sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH, + .max_sectors = TW_MAX_SECTORS, + .cmd_per_lun = TW_MAX_CMDS_PER_LUN, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = twl_host_attrs, + .emulated = 1, + .no_write_same = 1, +}; + +/* This function will probe and initialize a card */ +static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) +{ + struct Scsi_Host *host = NULL; + TW_Device_Extension *tw_dev; + int retval = -ENODEV; + int *ptr_phycount, phycount=0; + + retval = pci_enable_device(pdev); + if (retval) { + TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device"); + goto out_disable_device; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask"); + retval = -ENODEV; + goto out_disable_device; + } + + host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension)); + if (!host) { + TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension"); + retval = -ENOMEM; + goto out_disable_device; + } + tw_dev = shost_priv(host); + + /* Save values to device extension */ + tw_dev->host = host; + tw_dev->tw_pci_dev = pdev; + + if (twl_initialize_device_extension(tw_dev)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension"); + retval = -ENOMEM; + goto out_free_device_extension; + } + + /* Request IO regions */ + retval = pci_request_regions(pdev, "3w-sas"); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region"); + goto out_free_device_extension; + } + + /* Save base address, use region 1 */ + tw_dev->base_addr = pci_iomap(pdev, 1, 0); + if (!tw_dev->base_addr) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap"); + retval = -ENOMEM; + goto out_release_mem_region; + } + + /* Disable interrupts on the card */ + TWL_MASK_INTERRUPTS(tw_dev); + + /* Initialize the card */ + if (twl_reset_sequence(tw_dev, 0)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe"); + retval = -ENOMEM; + goto out_iounmap; + } + + /* Set host specific parameters */ + host->max_id = TW_MAX_UNITS; + host->max_cmd_len = TW_MAX_CDB_LEN; + host->max_lun = TW_MAX_LUNS; + host->max_channel = 0; + + /* Register the card with the kernel SCSI layer */ + retval = scsi_add_host(host, &pdev->dev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed"); + goto out_iounmap; + } + + pci_set_drvdata(pdev, host); + + printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n", + host->host_no, + (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, + TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH), + (u64)pci_resource_start(pdev, 1), pdev->irq); + + ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE, + TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH); + if (ptr_phycount) + phycount = le32_to_cpu(*(int *)ptr_phycount); + + printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n", + host->host_no, + (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, + TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH), + (char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE, + TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH), + phycount); + + /* Try to enable MSI */ + if (use_msi && !pci_enable_msi(pdev)) + set_bit(TW_USING_MSI, &tw_dev->flags); + + /* Now setup the interrupt handler */ + retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ"); + goto out_remove_host; + } + + twl_device_extension_list[twl_device_extension_count] = tw_dev; + twl_device_extension_count++; + + /* Re-enable interrupts on the card */ + TWL_UNMASK_INTERRUPTS(tw_dev); + + /* Finally, scan the host */ + scsi_scan_host(host); + + /* Add sysfs binary files */ + if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr)) + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read"); + if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr)) + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info"); + + if (twl_major == -1) { + if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0) + TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device"); + } + tw_dev->online = 1; + return 0; + +out_remove_host: + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_disable_msi(pdev); + scsi_remove_host(host); +out_iounmap: + iounmap(tw_dev->base_addr); +out_release_mem_region: + pci_release_regions(pdev); +out_free_device_extension: + twl_free_device_extension(tw_dev); + scsi_host_put(host); +out_disable_device: + pci_disable_device(pdev); + + return retval; +} /* End twl_probe() */ + +/* This function is called to remove a device */ +static void twl_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev; + + if (!host) + return; + + tw_dev = (TW_Device_Extension *)host->hostdata; + + if (!tw_dev->online) + return; + + /* Remove sysfs binary files */ + sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr); + sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr); + + scsi_remove_host(tw_dev->host); + + /* Unregister character device */ + if (twl_major >= 0) { + unregister_chrdev(twl_major, "twl"); + twl_major = -1; + } + + /* Shutdown the card */ + __twl_shutdown(tw_dev); + + /* Disable MSI if enabled */ + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_disable_msi(pdev); + + /* Free IO remapping */ + iounmap(tw_dev->base_addr); + + /* Free up the mem region */ + pci_release_regions(pdev); + + /* Free up device extension resources */ + twl_free_device_extension(tw_dev); + + scsi_host_put(tw_dev->host); + pci_disable_device(pdev); + twl_device_extension_count--; +} /* End twl_remove() */ + +#ifdef CONFIG_PM +/* This function is called on PCI suspend */ +static int twl_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + + printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no); + /* Disable interrupts */ + TWL_MASK_INTERRUPTS(tw_dev); + + free_irq(tw_dev->tw_pci_dev->irq, tw_dev); + + /* Tell the card we are shutting down */ + if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend"); + } else { + printk(KERN_WARNING "3w-sas: Suspend complete.\n"); + } + + /* Clear doorbell interrupt */ + TWL_CLEAR_DB_INTERRUPT(tw_dev); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} /* End twl_suspend() */ + +/* This function is called on PCI resume */ +static int twl_resume(struct pci_dev *pdev) +{ + int retval = 0; + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + + printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no); + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume"); + return retval; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume"); + retval = -ENODEV; + goto out_disable_device; + } + + /* Initialize the card */ + if (twl_reset_sequence(tw_dev, 0)) { + retval = -ENODEV; + goto out_disable_device; + } + + /* Now setup the interrupt handler */ + retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume"); + retval = -ENODEV; + goto out_disable_device; + } + + /* Now enable MSI if enabled */ + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_enable_msi(pdev); + + /* Re-enable interrupts on the card */ + TWL_UNMASK_INTERRUPTS(tw_dev); + + printk(KERN_WARNING "3w-sas: Resume complete.\n"); + return 0; + +out_disable_device: + scsi_remove_host(host); + pci_disable_device(pdev); + + return retval; +} /* End twl_resume() */ +#endif + +/* PCI Devices supported by this driver */ +static struct pci_device_id twl_pci_tbl[] = { + { PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) }, + { } +}; +MODULE_DEVICE_TABLE(pci, twl_pci_tbl); + +/* pci_driver initializer */ +static struct pci_driver twl_driver = { + .name = "3w-sas", + .id_table = twl_pci_tbl, + .probe = twl_probe, + .remove = twl_remove, +#ifdef CONFIG_PM + .suspend = twl_suspend, + .resume = twl_resume, +#endif + .shutdown = twl_shutdown +}; + +/* This function is called on driver initialization */ +static int __init twl_init(void) +{ + printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); + + return pci_register_driver(&twl_driver); +} /* End twl_init() */ + +/* This function is called on driver exit */ +static void __exit twl_exit(void) +{ + pci_unregister_driver(&twl_driver); +} /* End twl_exit() */ + +module_init(twl_init); +module_exit(twl_exit); + |