diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/scsi/a2091.c | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c new file mode 100644 index 000000000..61aadc7ac --- /dev/null +++ b/drivers/scsi/a2091.c @@ -0,0 +1,264 @@ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/zorro.h> +#include <linux/module.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/amigaints.h> +#include <asm/amigahw.h> + +#include "scsi.h" +#include "wd33c93.h" +#include "a2091.h" + + +struct a2091_hostdata { + struct WD33C93_hostdata wh; + struct a2091_scsiregs *regs; +}; + +static irqreturn_t a2091_intr(int irq, void *data) +{ + struct Scsi_Host *instance = data; + struct a2091_hostdata *hdata = shost_priv(instance); + unsigned int status = hdata->regs->ISTR; + unsigned long flags; + + if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) + return IRQ_NONE; + + spin_lock_irqsave(instance->host_lock, flags); + wd33c93_intr(instance); + spin_unlock_irqrestore(instance->host_lock, flags); + return IRQ_HANDLED; +} + +static int dma_setup(struct scsi_cmnd *cmd, int dir_in) +{ + struct Scsi_Host *instance = cmd->device->host; + struct a2091_hostdata *hdata = shost_priv(instance); + struct WD33C93_hostdata *wh = &hdata->wh; + struct a2091_scsiregs *regs = hdata->regs; + unsigned short cntr = CNTR_PDMD | CNTR_INTEN; + unsigned long addr = virt_to_bus(cmd->SCp.ptr); + + /* don't allow DMA if the physical address is bad */ + if (addr & A2091_XFER_MASK) { + wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; + wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len, + GFP_KERNEL); + + /* can't allocate memory; use PIO */ + if (!wh->dma_bounce_buffer) { + wh->dma_bounce_len = 0; + return 1; + } + + /* get the physical address of the bounce buffer */ + addr = virt_to_bus(wh->dma_bounce_buffer); + + /* the bounce buffer may not be in the first 16M of physmem */ + if (addr & A2091_XFER_MASK) { + /* we could use chipmem... maybe later */ + kfree(wh->dma_bounce_buffer); + wh->dma_bounce_buffer = NULL; + wh->dma_bounce_len = 0; + return 1; + } + + if (!dir_in) { + /* copy to bounce buffer for a write */ + memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr, + cmd->SCp.this_residual); + } + } + + /* setup dma direction */ + if (!dir_in) + cntr |= CNTR_DDIR; + + /* remember direction */ + wh->dma_dir = dir_in; + + regs->CNTR = cntr; + + /* setup DMA *physical* address */ + regs->ACR = addr; + + if (dir_in) { + /* invalidate any cache */ + cache_clear(addr, cmd->SCp.this_residual); + } else { + /* push any dirty cache */ + cache_push(addr, cmd->SCp.this_residual); + } + /* start DMA */ + regs->ST_DMA = 1; + + /* return success */ + return 0; +} + +static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, + int status) +{ + struct a2091_hostdata *hdata = shost_priv(instance); + struct WD33C93_hostdata *wh = &hdata->wh; + struct a2091_scsiregs *regs = hdata->regs; + + /* disable SCSI interrupts */ + unsigned short cntr = CNTR_PDMD; + + if (!wh->dma_dir) + cntr |= CNTR_DDIR; + + /* disable SCSI interrupts */ + regs->CNTR = cntr; + + /* flush if we were reading */ + if (wh->dma_dir) { + regs->FLUSH = 1; + while (!(regs->ISTR & ISTR_FE_FLG)) + ; + } + + /* clear a possible interrupt */ + regs->CINT = 1; + + /* stop DMA */ + regs->SP_DMA = 1; + + /* restore the CONTROL bits (minus the direction flag) */ + regs->CNTR = CNTR_PDMD | CNTR_INTEN; + + /* copy from a bounce buffer, if necessary */ + if (status && wh->dma_bounce_buffer) { + if (wh->dma_dir) + memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer, + SCpnt->SCp.this_residual); + kfree(wh->dma_bounce_buffer); + wh->dma_bounce_buffer = NULL; + wh->dma_bounce_len = 0; + } +} + +static struct scsi_host_template a2091_scsi_template = { + .module = THIS_MODULE, + .name = "Commodore A2091/A590 SCSI", + .show_info = wd33c93_show_info, + .write_info = wd33c93_write_info, + .proc_name = "A2901", + .queuecommand = wd33c93_queuecommand, + .eh_abort_handler = wd33c93_abort, + .eh_host_reset_handler = wd33c93_host_reset, + .can_queue = CAN_QUEUE, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = CMD_PER_LUN, + .use_clustering = DISABLE_CLUSTERING +}; + +static int a2091_probe(struct zorro_dev *z, const struct zorro_device_id *ent) +{ + struct Scsi_Host *instance; + int error; + struct a2091_scsiregs *regs; + wd33c93_regs wdregs; + struct a2091_hostdata *hdata; + + if (!request_mem_region(z->resource.start, 256, "wd33c93")) + return -EBUSY; + + instance = scsi_host_alloc(&a2091_scsi_template, + sizeof(struct a2091_hostdata)); + if (!instance) { + error = -ENOMEM; + goto fail_alloc; + } + + instance->irq = IRQ_AMIGA_PORTS; + instance->unique_id = z->slotaddr; + + regs = ZTWO_VADDR(z->resource.start); + regs->DAWR = DAWR_A2091; + + wdregs.SASR = ®s->SASR; + wdregs.SCMD = ®s->SCMD; + + hdata = shost_priv(instance); + hdata->wh.no_sync = 0xff; + hdata->wh.fast = 0; + hdata->wh.dma_mode = CTRL_DMA; + hdata->regs = regs; + + wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10); + error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, + "A2091 SCSI", instance); + if (error) + goto fail_irq; + + regs->CNTR = CNTR_PDMD | CNTR_INTEN; + + error = scsi_add_host(instance, NULL); + if (error) + goto fail_host; + + zorro_set_drvdata(z, instance); + + scsi_scan_host(instance); + return 0; + +fail_host: + free_irq(IRQ_AMIGA_PORTS, instance); +fail_irq: + scsi_host_put(instance); +fail_alloc: + release_mem_region(z->resource.start, 256); + return error; +} + +static void a2091_remove(struct zorro_dev *z) +{ + struct Scsi_Host *instance = zorro_get_drvdata(z); + struct a2091_hostdata *hdata = shost_priv(instance); + + hdata->regs->CNTR = 0; + scsi_remove_host(instance); + free_irq(IRQ_AMIGA_PORTS, instance); + scsi_host_put(instance); + release_mem_region(z->resource.start, 256); +} + +static struct zorro_device_id a2091_zorro_tbl[] = { + { ZORRO_PROD_CBM_A590_A2091_1 }, + { ZORRO_PROD_CBM_A590_A2091_2 }, + { 0 } +}; +MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl); + +static struct zorro_driver a2091_driver = { + .name = "a2091", + .id_table = a2091_zorro_tbl, + .probe = a2091_probe, + .remove = a2091_remove, +}; + +static int __init a2091_init(void) +{ + return zorro_register_driver(&a2091_driver); +} +module_init(a2091_init); + +static void __exit a2091_exit(void) +{ + zorro_unregister_driver(&a2091_driver); +} +module_exit(a2091_exit); + +MODULE_DESCRIPTION("Commodore A2091/A590 SCSI"); +MODULE_LICENSE("GPL"); |