diff options
Diffstat (limited to 'drivers/scsi/aacraid/comminit.c')
| -rw-r--r-- | drivers/scsi/aacraid/comminit.c | 670 |
1 files changed, 670 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c new file mode 100644 index 000000000..0dc7b5a4f --- /dev/null +++ b/drivers/scsi/aacraid/comminit.c @@ -0,0 +1,670 @@ +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000-2010 Adaptec, Inc. + * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) + * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Module Name: + * comminit.c + * + * Abstract: This supports the initialization of the host adapter commuication interface. + * This is a platform dependent module for the pci cyclone board. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/mm.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_cmnd.h> + +#include "aacraid.h" + +struct aac_common aac_config = { + .irq_mod = 1 +}; + +static inline int aac_is_msix_mode(struct aac_dev *dev) +{ + u32 status = 0; + + if (aac_is_src(dev)) + status = src_readl(dev, MUnit.OMR); + return (status & AAC_INT_MODE_MSIX); +} + +static inline void aac_change_to_intx(struct aac_dev *dev) +{ + aac_src_access_devreg(dev, AAC_DISABLE_MSIX); + aac_src_access_devreg(dev, AAC_ENABLE_INTX); +} + +static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign) +{ + unsigned char *base; + unsigned long size, align; + const unsigned long fibsize = dev->max_fib_size; + const unsigned long printfbufsiz = 256; + unsigned long host_rrq_size, aac_init_size; + union aac_init *init; + dma_addr_t phys; + unsigned long aac_max_hostphysmempages; + + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3 && + !dev->sa_firmware)) { + host_rrq_size = + (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) + * sizeof(u32); + aac_init_size = sizeof(union aac_init); + } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3 && + dev->sa_firmware) { + host_rrq_size = (dev->scsi_host_ptr->can_queue + + AAC_NUM_MGT_FIB) * sizeof(u32) * AAC_MAX_MSIX; + aac_init_size = sizeof(union aac_init) + + (AAC_MAX_HRRQ - 1) * sizeof(struct _rrq); + } else { + host_rrq_size = 0; + aac_init_size = sizeof(union aac_init); + } + size = fibsize + aac_init_size + commsize + commalign + + printfbufsiz + host_rrq_size; + + base = dma_alloc_coherent(&dev->pdev->dev, size, &phys, GFP_KERNEL); + if (base == NULL) { + printk(KERN_ERR "aacraid: unable to create mapping.\n"); + return 0; + } + + dev->comm_addr = (void *)base; + dev->comm_phys = phys; + dev->comm_size = size; + + if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) || + (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) { + dev->host_rrq = (u32 *)(base + fibsize); + dev->host_rrq_pa = phys + fibsize; + memset(dev->host_rrq, 0, host_rrq_size); + } + + dev->init = (union aac_init *)(base + fibsize + host_rrq_size); + dev->init_pa = phys + fibsize + host_rrq_size; + + init = dev->init; + + if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) { + int i; + u64 addr; + + init->r8.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_8); + init->r8.init_flags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | + INITFLAGS_DRIVER_USES_UTC_TIME | + INITFLAGS_DRIVER_SUPPORTS_PM); + init->r8.init_flags |= + cpu_to_le32(INITFLAGS_DRIVER_SUPPORTS_HBA_MODE); + init->r8.rr_queue_count = cpu_to_le32(dev->max_msix); + init->r8.max_io_size = + cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); + init->r8.max_num_aif = init->r8.reserved1 = + init->r8.reserved2 = 0; + + for (i = 0; i < dev->max_msix; i++) { + addr = (u64)dev->host_rrq_pa + dev->vector_cap * i * + sizeof(u32); + init->r8.rrq[i].host_addr_high = cpu_to_le32( + upper_32_bits(addr)); + init->r8.rrq[i].host_addr_low = cpu_to_le32( + lower_32_bits(addr)); + init->r8.rrq[i].msix_id = i; + init->r8.rrq[i].element_count = cpu_to_le16( + (u16)dev->vector_cap); + init->r8.rrq[i].comp_thresh = + init->r8.rrq[i].unused = 0; + } + + pr_warn("aacraid: Comm Interface type3 enabled\n"); + } else { + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION); + if (dev->max_fib_size != sizeof(struct hw_fib)) + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4); + init->r7.no_of_msix_vectors = cpu_to_le32(SA_MINIPORT_REVISION); + init->r7.fsrev = cpu_to_le32(dev->fsrev); + + /* + * Adapter Fibs are the first thing allocated so that they + * start page aligned + */ + dev->aif_base_va = (struct hw_fib *)base; + + init->r7.adapter_fibs_virtual_address = 0; + init->r7.adapter_fibs_physical_address = cpu_to_le32((u32)phys); + init->r7.adapter_fibs_size = cpu_to_le32(fibsize); + init->r7.adapter_fib_align = cpu_to_le32(sizeof(struct hw_fib)); + + /* + * number of 4k pages of host physical memory. The aacraid fw + * needs this number to be less than 4gb worth of pages. New + * firmware doesn't have any issues with the mapping system, but + * older Firmware did, and had *troubles* dealing with the math + * overloading past 32 bits, thus we must limit this field. + */ + aac_max_hostphysmempages = + dma_get_required_mask(&dev->pdev->dev) >> 12; + if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES) + init->r7.host_phys_mem_pages = + cpu_to_le32(aac_max_hostphysmempages); + else + init->r7.host_phys_mem_pages = + cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); + + init->r7.init_flags = + cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME | + INITFLAGS_DRIVER_SUPPORTS_PM); + init->r7.max_io_commands = + cpu_to_le32(dev->scsi_host_ptr->can_queue + + AAC_NUM_MGT_FIB); + init->r7.max_io_size = + cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); + init->r7.max_fib_size = cpu_to_le32(dev->max_fib_size); + init->r7.max_num_aif = cpu_to_le32(dev->max_num_aif); + + if (dev->comm_interface == AAC_COMM_MESSAGE) { + init->r7.init_flags |= + cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED); + pr_warn("aacraid: Comm Interface enabled\n"); + } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) { + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6); + init->r7.init_flags |= + cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | + INITFLAGS_NEW_COMM_TYPE1_SUPPORTED | + INITFLAGS_FAST_JBOD_SUPPORTED); + init->r7.host_rrq_addr_high = + cpu_to_le32(upper_32_bits(dev->host_rrq_pa)); + init->r7.host_rrq_addr_low = + cpu_to_le32(lower_32_bits(dev->host_rrq_pa)); + pr_warn("aacraid: Comm Interface type1 enabled\n"); + } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { + init->r7.init_struct_revision = + cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7); + init->r7.init_flags |= + cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED | + INITFLAGS_NEW_COMM_TYPE2_SUPPORTED | + INITFLAGS_FAST_JBOD_SUPPORTED); + init->r7.host_rrq_addr_high = + cpu_to_le32(upper_32_bits(dev->host_rrq_pa)); + init->r7.host_rrq_addr_low = + cpu_to_le32(lower_32_bits(dev->host_rrq_pa)); + init->r7.no_of_msix_vectors = + cpu_to_le32(dev->max_msix); + /* must be the COMM_PREFERRED_SETTINGS values */ + pr_warn("aacraid: Comm Interface type2 enabled\n"); + } + } + + /* + * Increment the base address by the amount already used + */ + base = base + fibsize + host_rrq_size + aac_init_size; + phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size + + aac_init_size); + + /* + * Align the beginning of Headers to commalign + */ + align = (commalign - ((uintptr_t)(base) & (commalign - 1))); + base = base + align; + phys = phys + align; + /* + * Fill in addresses of the Comm Area Headers and Queues + */ + *commaddr = base; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) + init->r7.comm_header_address = cpu_to_le32((u32)phys); + /* + * Increment the base address by the size of the CommArea + */ + base = base + commsize; + phys = phys + commsize; + /* + * Place the Printf buffer area after the Fast I/O comm area. + */ + dev->printfbuf = (void *)base; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) { + init->r7.printfbuf = cpu_to_le32(phys); + init->r7.printfbufsiz = cpu_to_le32(printfbufsiz); + } + memset(base, 0, printfbufsiz); + return 1; +} + +static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize) +{ + atomic_set(&q->numpending, 0); + q->dev = dev; + init_waitqueue_head(&q->cmdready); + INIT_LIST_HEAD(&q->cmdq); + init_waitqueue_head(&q->qfull); + spin_lock_init(&q->lockdata); + q->lock = &q->lockdata; + q->headers.producer = (__le32 *)mem; + q->headers.consumer = (__le32 *)(mem+1); + *(q->headers.producer) = cpu_to_le32(qsize); + *(q->headers.consumer) = cpu_to_le32(qsize); + q->entries = qsize; +} + +static void aac_wait_for_io_completion(struct aac_dev *aac) +{ + unsigned long flagv = 0; + int i = 0; + + for (i = 60; i; --i) { + struct scsi_device *dev; + struct scsi_cmnd *command; + int active = 0; + + __shost_for_each_device(dev, aac->scsi_host_ptr) { + spin_lock_irqsave(&dev->list_lock, flagv); + list_for_each_entry(command, &dev->cmd_list, list) { + if (command->SCp.phase == AAC_OWNER_FIRMWARE) { + active++; + break; + } + } + spin_unlock_irqrestore(&dev->list_lock, flagv); + if (active) + break; + + } + /* + * We can exit If all the commands are complete + */ + if (active == 0) + break; + ssleep(1); + } +} + +/** + * aac_send_shutdown - shutdown an adapter + * @dev: Adapter to shutdown + * + * This routine will send a VM_CloseAll (shutdown) request to the adapter. + */ + +int aac_send_shutdown(struct aac_dev * dev) +{ + struct fib * fibctx; + struct aac_close *cmd; + int status = 0; + + if (aac_adapter_check_health(dev)) + return status; + + if (!dev->adapter_shutdown) { + mutex_lock(&dev->ioctl_mutex); + dev->adapter_shutdown = 1; + mutex_unlock(&dev->ioctl_mutex); + } + + aac_wait_for_io_completion(dev); + + fibctx = aac_fib_alloc(dev); + if (!fibctx) + return -ENOMEM; + aac_fib_init(fibctx); + + cmd = (struct aac_close *) fib_data(fibctx); + cmd->command = cpu_to_le32(VM_CloseAll); + cmd->cid = cpu_to_le32(0xfffffffe); + + status = aac_fib_send(ContainerCommand, + fibctx, + sizeof(struct aac_close), + FsaNormal, + -2 /* Timeout silently */, 1, + NULL, NULL); + + if (status >= 0) + aac_fib_complete(fibctx); + /* FIB should be freed only after getting the response from the F/W */ + if (status != -ERESTARTSYS) + aac_fib_free(fibctx); + if (aac_is_src(dev) && + dev->msi_enabled) + aac_set_intx_mode(dev); + return status; +} + +/** + * aac_comm_init - Initialise FSA data structures + * @dev: Adapter to initialise + * + * Initializes the data structures that are required for the FSA commuication + * interface to operate. + * Returns + * 1 - if we were able to init the commuication interface. + * 0 - If there were errors initing. This is a fatal error. + */ + +static int aac_comm_init(struct aac_dev * dev) +{ + unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2; + unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES; + u32 *headers; + struct aac_entry * queues; + unsigned long size; + struct aac_queue_block * comm = dev->queues; + /* + * Now allocate and initialize the zone structures used as our + * pool of FIB context records. The size of the zone is based + * on the system memory size. We also initialize the mutex used + * to protect the zone. + */ + spin_lock_init(&dev->fib_lock); + + /* + * Allocate the physically contiguous space for the commuication + * queue headers. + */ + + size = hdrsize + queuesize; + + if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT)) + return -ENOMEM; + + queues = (struct aac_entry *)(((ulong)headers) + hdrsize); + + /* Adapter to Host normal priority Command queue */ + comm->queue[HostNormCmdQueue].base = queues; + aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES); + queues += HOST_NORM_CMD_ENTRIES; + headers += 2; + + /* Adapter to Host high priority command queue */ + comm->queue[HostHighCmdQueue].base = queues; + aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES); + + queues += HOST_HIGH_CMD_ENTRIES; + headers +=2; + + /* Host to adapter normal priority command queue */ + comm->queue[AdapNormCmdQueue].base = queues; + aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES); + + queues += ADAP_NORM_CMD_ENTRIES; + headers += 2; + + /* host to adapter high priority command queue */ + comm->queue[AdapHighCmdQueue].base = queues; + aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES); + + queues += ADAP_HIGH_CMD_ENTRIES; + headers += 2; + + /* adapter to host normal priority response queue */ + comm->queue[HostNormRespQueue].base = queues; + aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES); + queues += HOST_NORM_RESP_ENTRIES; + headers += 2; + + /* adapter to host high priority response queue */ + comm->queue[HostHighRespQueue].base = queues; + aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES); + + queues += HOST_HIGH_RESP_ENTRIES; + headers += 2; + + /* host to adapter normal priority response queue */ + comm->queue[AdapNormRespQueue].base = queues; + aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES); + + queues += ADAP_NORM_RESP_ENTRIES; + headers += 2; + + /* host to adapter high priority response queue */ + comm->queue[AdapHighRespQueue].base = queues; + aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES); + + comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock; + comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock; + comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock; + comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock; + + return 0; +} + +void aac_define_int_mode(struct aac_dev *dev) +{ + int i, msi_count, min_msix; + + msi_count = i = 0; + /* max. vectors from GET_COMM_PREFERRED_SETTINGS */ + if (dev->max_msix == 0 || + dev->pdev->device == PMC_DEVICE_S6 || + dev->sync_mode) { + dev->max_msix = 1; + dev->vector_cap = + dev->scsi_host_ptr->can_queue + + AAC_NUM_MGT_FIB; + return; + } + + /* Don't bother allocating more MSI-X vectors than cpus */ + msi_count = min(dev->max_msix, + (unsigned int)num_online_cpus()); + + dev->max_msix = msi_count; + + if (msi_count > AAC_MAX_MSIX) + msi_count = AAC_MAX_MSIX; + + if (msi_count > 1 && + pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) { + min_msix = 2; + i = pci_alloc_irq_vectors(dev->pdev, + min_msix, msi_count, + PCI_IRQ_MSIX | PCI_IRQ_AFFINITY); + if (i > 0) { + dev->msi_enabled = 1; + msi_count = i; + } else { + dev->msi_enabled = 0; + dev_err(&dev->pdev->dev, + "MSIX not supported!! Will try INTX 0x%x.\n", i); + } + } + + if (!dev->msi_enabled) + dev->max_msix = msi_count = 1; + else { + if (dev->max_msix > msi_count) + dev->max_msix = msi_count; + } + if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3 && dev->sa_firmware) + dev->vector_cap = dev->scsi_host_ptr->can_queue + + AAC_NUM_MGT_FIB; + else + dev->vector_cap = (dev->scsi_host_ptr->can_queue + + AAC_NUM_MGT_FIB) / msi_count; + +} +struct aac_dev *aac_init_adapter(struct aac_dev *dev) +{ + u32 status[5]; + struct Scsi_Host * host = dev->scsi_host_ptr; + extern int aac_sync_mode; + + /* + * Check the preferred comm settings, defaults from template. + */ + dev->management_fib_count = 0; + spin_lock_init(&dev->manage_lock); + spin_lock_init(&dev->sync_lock); + spin_lock_init(&dev->iq_lock); + dev->max_fib_size = sizeof(struct hw_fib); + dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size + - sizeof(struct aac_fibhdr) + - sizeof(struct aac_write) + sizeof(struct sgentry)) + / sizeof(struct sgentry); + dev->comm_interface = AAC_COMM_PRODUCER; + dev->raw_io_interface = dev->raw_io_64 = 0; + + + /* + * Enable INTX mode, if not done already Enabled + */ + if (aac_is_msix_mode(dev)) { + aac_change_to_intx(dev); + dev_info(&dev->pdev->dev, "Changed firmware to INTX mode"); + } + + if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, + 0, 0, 0, 0, 0, 0, + status+0, status+1, status+2, status+3, status+4)) && + (status[0] == 0x00000001)) { + dev->doorbell_mask = status[3]; + if (status[1] & AAC_OPT_NEW_COMM_64) + dev->raw_io_64 = 1; + dev->sync_mode = aac_sync_mode; + if (dev->a_ops.adapter_comm && + (status[1] & AAC_OPT_NEW_COMM)) { + dev->comm_interface = AAC_COMM_MESSAGE; + dev->raw_io_interface = 1; + if ((status[1] & AAC_OPT_NEW_COMM_TYPE1)) { + /* driver supports TYPE1 (Tupelo) */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE1; + } else if (status[1] & AAC_OPT_NEW_COMM_TYPE2) { + /* driver supports TYPE2 (Denali, Yosemite) */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE2; + } else if (status[1] & AAC_OPT_NEW_COMM_TYPE3) { + /* driver supports TYPE3 (Yosemite, Thor) */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE3; + } else if (status[1] & AAC_OPT_NEW_COMM_TYPE4) { + /* not supported TYPE - switch to sync. mode */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE2; + dev->sync_mode = 1; + } + } + if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) && + (status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE))) + dev->sa_firmware = 1; + else + dev->sa_firmware = 0; + + if ((dev->comm_interface == AAC_COMM_MESSAGE) && + (status[2] > dev->base_size)) { + aac_adapter_ioremap(dev, 0); + dev->base_size = status[2]; + if (aac_adapter_ioremap(dev, status[2])) { + /* remap failed, go back ... */ + dev->comm_interface = AAC_COMM_PRODUCER; + if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) { + printk(KERN_WARNING + "aacraid: unable to map adapter.\n"); + return NULL; + } + } + } + } + dev->max_msix = 0; + dev->msi_enabled = 0; + dev->adapter_shutdown = 0; + if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS, + 0, 0, 0, 0, 0, 0, + status+0, status+1, status+2, status+3, status+4)) + && (status[0] == 0x00000001)) { + /* + * status[1] >> 16 maximum command size in KB + * status[1] & 0xFFFF maximum FIB size + * status[2] >> 16 maximum SG elements to driver + * status[2] & 0xFFFF maximum SG elements from driver + * status[3] & 0xFFFF maximum number FIBs outstanding + */ + host->max_sectors = (status[1] >> 16) << 1; + /* Multiple of 32 for PMC */ + dev->max_fib_size = status[1] & 0xFFE0; + host->sg_tablesize = status[2] >> 16; + dev->sg_tablesize = status[2] & 0xFFFF; + if (aac_is_src(dev)) { + if (host->can_queue > (status[3] >> 16) - + AAC_NUM_MGT_FIB) + host->can_queue = (status[3] >> 16) - + AAC_NUM_MGT_FIB; + } else if (host->can_queue > (status[3] & 0xFFFF) - + AAC_NUM_MGT_FIB) + host->can_queue = (status[3] & 0xFFFF) - + AAC_NUM_MGT_FIB; + + dev->max_num_aif = status[4] & 0xFFFF; + } + if (numacb > 0) { + if (numacb < host->can_queue) + host->can_queue = numacb; + else + pr_warn("numacb=%d ignored\n", numacb); + } + + if (aac_is_src(dev)) + aac_define_int_mode(dev); + /* + * Ok now init the communication subsystem + */ + + dev->queues = kzalloc(sizeof(struct aac_queue_block), GFP_KERNEL); + if (dev->queues == NULL) { + printk(KERN_ERR "Error could not allocate comm region.\n"); + return NULL; + } + + if (aac_comm_init(dev)<0){ + kfree(dev->queues); + return NULL; + } + /* + * Initialize the list of fibs + */ + if (aac_fib_setup(dev) < 0) { + kfree(dev->queues); + return NULL; + } + + INIT_LIST_HEAD(&dev->fib_list); + INIT_LIST_HEAD(&dev->sync_fib_list); + + return dev; +} + |