diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/scsi/arm/fas216.h | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h new file mode 100644 index 000000000..c57c16ef8 --- /dev/null +++ b/drivers/scsi/arm/fas216.h @@ -0,0 +1,393 @@ +/* + * linux/drivers/acorn/scsi/fas216.h + * + * Copyright (C) 1997-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * FAS216 generic driver + */ +#ifndef FAS216_H +#define FAS216_H + +#include <scsi/scsi_eh.h> + +#include "queue.h" +#include "msgqueue.h" + +/* FAS register definitions */ + +/* transfer count low */ +#define REG_CTCL (0) +#define REG_STCL (0) + +/* transfer count medium */ +#define REG_CTCM (1) +#define REG_STCM (1) + +/* fifo data */ +#define REG_FF (2) + +/* command */ +#define REG_CMD (3) +#define CMD_NOP 0x00 +#define CMD_FLUSHFIFO 0x01 +#define CMD_RESETCHIP 0x02 +#define CMD_RESETSCSI 0x03 + +#define CMD_TRANSFERINFO 0x10 +#define CMD_INITCMDCOMPLETE 0x11 +#define CMD_MSGACCEPTED 0x12 +#define CMD_PADBYTES 0x18 +#define CMD_SETATN 0x1a +#define CMD_RSETATN 0x1b + +#define CMD_SELECTWOATN 0x41 +#define CMD_SELECTATN 0x42 +#define CMD_SELECTATNSTOP 0x43 +#define CMD_ENABLESEL 0x44 +#define CMD_DISABLESEL 0x45 +#define CMD_SELECTATN3 0x46 +#define CMD_RESEL3 0x47 + +#define CMD_WITHDMA 0x80 + +/* status register (read) */ +#define REG_STAT (4) +#define STAT_IO (1 << 0) /* IO phase */ +#define STAT_CD (1 << 1) /* CD phase */ +#define STAT_MSG (1 << 2) /* MSG phase */ +#define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */ +#define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */ +#define STAT_PARITYERROR (1 << 5) /* Parity error */ +#define STAT_REALBAD (1 << 6) /* Something bad */ +#define STAT_INT (1 << 7) /* Interrupt */ + +#define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO) +#define STAT_DATAOUT (0) /* Data out */ +#define STAT_DATAIN (STAT_IO) /* Data in */ +#define STAT_COMMAND (STAT_CD) /* Command out */ +#define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */ +#define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */ +#define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */ + +/* bus ID for select / reselect */ +#define REG_SDID (4) +#define BUSID(target) ((target) & 7) + +/* Interrupt status register (read) */ +#define REG_INST (5) +#define INST_SELWOATN (1 << 0) /* Select w/o ATN */ +#define INST_SELATN (1 << 1) /* Select w/ATN */ +#define INST_RESELECTED (1 << 2) /* Reselected */ +#define INST_FUNCDONE (1 << 3) /* Function done */ +#define INST_BUSSERVICE (1 << 4) /* Bus service */ +#define INST_DISCONNECT (1 << 5) /* Disconnect */ +#define INST_ILLEGALCMD (1 << 6) /* Illegal command */ +#define INST_BUSRESET (1 << 7) /* SCSI Bus reset */ + +/* Timeout register (write) */ +#define REG_STIM (5) + +/* Sequence step register (read) */ +#define REG_IS (6) +#define IS_BITS 0x07 +#define IS_SELARB 0x00 /* Select & Arb ok */ +#define IS_MSGBYTESENT 0x01 /* One byte message sent*/ +#define IS_NOTCOMMAND 0x02 /* Not in command state */ +#define IS_EARLYPHASE 0x03 /* Early phase change */ +#define IS_COMPLETE 0x04 /* Command ok */ +#define IS_SOF 0x08 /* Sync off flag */ + +/* Transfer period step (write) */ +#define REG_STP (6) + +/* Synchronous Offset (write) */ +#define REG_SOF (7) + +/* Fifo state register (read) */ +#define REG_CFIS (7) +#define CFIS_CF 0x1f /* Num bytes in FIFO */ +#define CFIS_IS 0xe0 /* Step */ + +/* config register 1 */ +#define REG_CNTL1 (8) +#define CNTL1_CID (7 << 0) /* Chip ID */ +#define CNTL1_STE (1 << 3) /* Self test enable */ +#define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */ +#define CNTL1_PTE (1 << 5) /* Parity test enable */ +#define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */ +#define CNTL1_ETM (1 << 7) /* Extended Timing Mode */ + +/* Clock conversion factor (read) */ +#define REG_CLKF (9) +#define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */ +#define CLKF_F10MHZ 0x02 /* 10 MHz */ +#define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */ +#define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */ +#define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */ +#define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */ +#define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */ + +/* Chip test register (write) */ +#define REG_FTM (10) +#define TEST_FTM 0x01 /* Force target mode */ +#define TEST_FIM 0x02 /* Force initiator mode */ +#define TEST_FHI 0x04 /* Force high impedance mode */ + +/* Configuration register 2 (read/write) */ +#define REG_CNTL2 (11) +#define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */ +#define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */ +#define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */ +#define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */ +#define CNTL2_TSDR (1 << 4) /* Tristate DREQ */ +#define CNTL2_SBO (1 << 5) /* Select Byte Order */ +#define CNTL2_ENF (1 << 6) /* Enable features */ +#define CNTL2_DAE (1 << 7) /* Data Alignment Enable */ + +/* Configuration register 3 (read/write) */ +#define REG_CNTL3 (12) +#define CNTL3_BS8 (1 << 0) /* Burst size 8 */ +#define CNTL3_MDM (1 << 1) /* Modify DMA mode */ +#define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */ +#define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */ +#define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */ +#define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */ +#define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */ +#define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */ + +/* High transfer count (read/write) */ +#define REG_CTCH (14) +#define REG_STCH (14) + +/* ID register (read only) */ +#define REG_ID (14) + +/* Data alignment */ +#define REG_DAL (15) + +typedef enum { + PHASE_IDLE, /* we're not planning on doing anything */ + PHASE_SELECTION, /* selecting a device */ + PHASE_SELSTEPS, /* selection with command steps */ + PHASE_COMMAND, /* command sent */ + PHASE_MESSAGESENT, /* selected, and we're sending cmd */ + PHASE_DATAOUT, /* data out to device */ + PHASE_DATAIN, /* data in from device */ + PHASE_MSGIN, /* message in from device */ + PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */ + PHASE_MSGOUT, /* after message out phase */ + PHASE_MSGOUT_EXPECT, /* expecting message out */ + PHASE_STATUS, /* status from device */ + PHASE_DONE /* Command complete */ +} phase_t; + +typedef enum { + DMA_OUT, /* DMA from memory to chip */ + DMA_IN /* DMA from chip to memory */ +} fasdmadir_t; + +typedef enum { + fasdma_none, /* No dma */ + fasdma_pio, /* PIO mode */ + fasdma_pseudo, /* Pseudo DMA */ + fasdma_real_block, /* Real DMA, on block by block basis */ + fasdma_real_all /* Real DMA, on request by request */ +} fasdmatype_t; + +typedef enum { + neg_wait, /* Negotiate with device */ + neg_inprogress, /* Negotiation sent */ + neg_complete, /* Negotiation complete */ + neg_targcomplete, /* Target completed negotiation */ + neg_invalid /* Negotiation not supported */ +} neg_t; + +#define MAGIC 0x441296bdUL +#define NR_MSGS 8 + +#define FASCAP_DMA (1 << 0) +#define FASCAP_PSEUDODMA (1 << 1) + +typedef struct { + unsigned long magic_start; + spinlock_t host_lock; + struct Scsi_Host *host; /* host */ + struct scsi_cmnd *SCpnt; /* currently processing command */ + struct scsi_cmnd *origSCpnt; /* original connecting command */ + struct scsi_cmnd *reqSCpnt; /* request sense command */ + struct scsi_cmnd *rstSCpnt; /* reset command */ + struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */ + int next_pending; /* next pending device */ + + /* + * Error recovery + */ + wait_queue_head_t eh_wait; + struct timer_list eh_timer; + unsigned int rst_dev_status; + unsigned int rst_bus_status; + + /* driver information */ + struct { + phase_t phase; /* current phase */ + void __iomem *io_base; /* iomem base of FAS216 */ + unsigned int io_shift; /* shift to adjust reg offsets by */ + unsigned char cfg[4]; /* configuration registers */ + const char *type; /* chip type */ + unsigned int irq; /* interrupt */ + int dma; /* dma channel */ + + struct scsi_pointer SCp; /* current commands data pointer */ + + MsgQueue_t msgs; /* message queue for connected device */ + + unsigned int async_stp; /* Async transfer STP value */ + unsigned char msgin_fifo; /* bytes in fifo at time of message in */ + unsigned char message[256]; /* last message received from device */ + + unsigned char disconnectable:1; /* this command can be disconnected */ + unsigned char aborting:1; /* aborting command */ + } scsi; + + /* statistics information */ + struct { + unsigned int queues; + unsigned int removes; + unsigned int fins; + unsigned int reads; + unsigned int writes; + unsigned int miscs; + unsigned int disconnects; + unsigned int aborts; + unsigned int bus_resets; + unsigned int host_resets; + } stats; + + /* configuration information */ + struct { + unsigned char clockrate; /* clock rate of FAS device (MHz) */ + unsigned char select_timeout; /* timeout (R5) */ + unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */ + unsigned char wide_max_size; /* Maximum wide transfer size */ + unsigned char cntl3; /* Control Reg 3 */ + unsigned int asyncperiod; /* Async transfer period (ns) */ + unsigned int capabilities; /* driver capabilities */ + unsigned int disconnect_ok:1; /* Disconnects allowed? */ + } ifcfg; + + /* queue handling */ + struct { + Queue_t issue; /* issue queue */ + Queue_t disconnected; /* disconnected command queue */ + } queues; + + /* per-device info */ + struct fas216_device { + unsigned char disconnect_ok:1; /* device can disconnect */ + unsigned char parity_enabled:1; /* parity checking enabled */ + unsigned char parity_check:1; /* need to check parity checking */ + unsigned char period; /* sync xfer period in (*4ns) */ + unsigned char stp; /* synchronous transfer period */ + unsigned char sof; /* synchronous offset register */ + unsigned char wide_xfer; /* currently negociated wide transfer */ + neg_t sync_state; /* synchronous transfer mode */ + neg_t wide_state; /* wide transfer mode */ + } device[8]; + unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */ + + /* dma */ + struct { + fasdmatype_t transfer_type; /* current type of DMA transfer */ + fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma); + void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer); + void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp); + } dma; + + /* miscellaneous */ + int internal_done; /* flag to indicate request done */ + struct scsi_eh_save ses; /* holds request sense restore info */ + unsigned long magic_end; +} FAS216_Info; + +/* Function: int fas216_init (struct Scsi_Host *instance) + * Purpose : initialise FAS/NCR/AMD SCSI structures. + * Params : instance - a driver-specific filled-out structure + * Returns : 0 on success + */ +extern int fas216_init (struct Scsi_Host *instance); + +/* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev) + * Purpose : initialise FAS/NCR/AMD SCSI ic. + * Params : instance - a driver-specific filled-out structure + * Returns : 0 on success + */ +extern int fas216_add (struct Scsi_Host *instance, struct device *dev); + +/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt) + * Purpose : queue a command for adapter to process. + * Params : h - host adapter + * : SCpnt - Command to queue + * Returns : 0 - success, else error + */ +extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); + +/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt) + * Purpose : queue a command for adapter to process, and process it to completion. + * Params : h - host adapter + * : SCpnt - Command to queue + * Returns : 0 - success, else error + */ +extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *); + +/* Function: irqreturn_t fas216_intr (FAS216_Info *info) + * Purpose : handle interrupts from the interface to progress a command + * Params : info - interface to service + */ +extern irqreturn_t fas216_intr (FAS216_Info *info); + +extern void fas216_remove (struct Scsi_Host *instance); + +/* Function: void fas216_release (struct Scsi_Host *instance) + * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic. + * Params : instance - a driver-specific filled-out structure + * Returns : 0 on success + */ +extern void fas216_release (struct Scsi_Host *instance); + +extern void fas216_print_host(FAS216_Info *info, struct seq_file *m); +extern void fas216_print_stats(FAS216_Info *info, struct seq_file *m); +extern void fas216_print_devices(FAS216_Info *info, struct seq_file *m); + +/* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt) + * Purpose : abort this command + * Params : SCpnt - command to abort + * Returns : FAILED if unable to abort + */ +extern int fas216_eh_abort(struct scsi_cmnd *SCpnt); + +/* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt) + * Purpose : Reset the device associated with this command + * Params : SCpnt - command specifing device to reset + * Returns : FAILED if unable to reset + */ +extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt); + +/* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt) + * Purpose : Reset the complete bus associated with this command + * Params : SCpnt - command specifing bus to reset + * Returns : FAILED if unable to reset + */ +extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt); + +/* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt) + * Purpose : Reset the host associated with this command + * Params : SCpnt - command specifing host to reset + * Returns : FAILED if unable to reset + */ +extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt); + +#endif /* FAS216_H */ |