diff options
Diffstat (limited to 'drivers/scsi/csiostor/csio_hw.c')
| -rw-r--r-- | drivers/scsi/csiostor/csio_hw.c | 4434 |
1 files changed, 4434 insertions, 0 deletions
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c new file mode 100644 index 000000000..1b6f9351b --- /dev/null +++ b/drivers/scsi/csiostor/csio_hw.c @@ -0,0 +1,4434 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/firmware.h> +#include <linux/stddef.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/compiler.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/log2.h> + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" + +int csio_dbg_level = 0xFEFF; +unsigned int csio_port_mask = 0xf; + +/* Default FW event queue entries. */ +static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE; + +/* Default MSI param level */ +int csio_msi = 2; + +/* FCoE function instances */ +static int dev_num; + +/* FCoE Adapter types & its description */ +static const struct csio_adap_desc csio_t5_fcoe_adapters[] = { + {"T580-Dbg 10G", "Chelsio T580-Dbg 10G [FCoE]"}, + {"T520-CR 10G", "Chelsio T520-CR 10G [FCoE]"}, + {"T522-CR 10G/1G", "Chelsio T522-CR 10G/1G [FCoE]"}, + {"T540-CR 10G", "Chelsio T540-CR 10G [FCoE]"}, + {"T520-BCH 10G", "Chelsio T520-BCH 10G [FCoE]"}, + {"T540-BCH 10G", "Chelsio T540-BCH 10G [FCoE]"}, + {"T540-CH 10G", "Chelsio T540-CH 10G [FCoE]"}, + {"T520-SO 10G", "Chelsio T520-SO 10G [FCoE]"}, + {"T520-CX4 10G", "Chelsio T520-CX4 10G [FCoE]"}, + {"T520-BT 10G", "Chelsio T520-BT 10G [FCoE]"}, + {"T504-BT 1G", "Chelsio T504-BT 1G [FCoE]"}, + {"B520-SR 10G", "Chelsio B520-SR 10G [FCoE]"}, + {"B504-BT 1G", "Chelsio B504-BT 1G [FCoE]"}, + {"T580-CR 10G", "Chelsio T580-CR 10G [FCoE]"}, + {"T540-LP-CR 10G", "Chelsio T540-LP-CR 10G [FCoE]"}, + {"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"}, + {"T580-LP-CR 40G", "Chelsio T580-LP-CR 40G [FCoE]"}, + {"T520-LL-CR 10G", "Chelsio T520-LL-CR 10G [FCoE]"}, + {"T560-CR 40G", "Chelsio T560-CR 40G [FCoE]"}, + {"T580-CR 40G", "Chelsio T580-CR 40G [FCoE]"}, + {"T580-SO 40G", "Chelsio T580-SO 40G [FCoE]"}, + {"T502-BT 1G", "Chelsio T502-BT 1G [FCoE]"} +}; + +static void csio_mgmtm_cleanup(struct csio_mgmtm *); +static void csio_hw_mbm_cleanup(struct csio_hw *); + +/* State machine forward declarations */ +static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev); +static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev); + +static void csio_hw_initialize(struct csio_hw *hw); +static void csio_evtq_stop(struct csio_hw *hw); +static void csio_evtq_start(struct csio_hw *hw); + +int csio_is_hw_ready(struct csio_hw *hw) +{ + return csio_match_state(hw, csio_hws_ready); +} + +int csio_is_hw_removing(struct csio_hw *hw) +{ + return csio_match_state(hw, csio_hws_removing); +} + + +/* + * csio_hw_wait_op_done_val - wait until an operation is completed + * @hw: the HW module + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ +int +csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask, + int polarity, int attempts, int delay, uint32_t *valp) +{ + uint32_t val; + while (1) { + val = csio_rd_reg32(hw, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +/* + * csio_hw_tp_wr_bits_indirect - set/clear bits in an indirect TP register + * @hw: the adapter + * @addr: the indirect TP register address + * @mask: specifies the field within the register to modify + * @val: new value for the field + * + * Sets a field of an indirect TP register to the given value. + */ +void +csio_hw_tp_wr_bits_indirect(struct csio_hw *hw, unsigned int addr, + unsigned int mask, unsigned int val) +{ + csio_wr_reg32(hw, addr, TP_PIO_ADDR_A); + val |= csio_rd_reg32(hw, TP_PIO_DATA_A) & ~mask; + csio_wr_reg32(hw, val, TP_PIO_DATA_A); +} + +void +csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask, + uint32_t value) +{ + uint32_t val = csio_rd_reg32(hw, reg) & ~mask; + + csio_wr_reg32(hw, val | value, reg); + /* Flush */ + csio_rd_reg32(hw, reg); + +} + +static int +csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf) +{ + return hw->chip_ops->chip_memory_rw(hw, MEMWIN_CSIOSTOR, mtype, + addr, len, buf, 0); +} + +/* + * EEPROM reads take a few tens of us while writes can take a bit over 5 ms. + */ +#define EEPROM_MAX_RD_POLL 40 +#define EEPROM_MAX_WR_POLL 6 +#define EEPROM_STAT_ADDR 0x7bfc +#define VPD_BASE 0x400 +#define VPD_BASE_OLD 0 +#define VPD_LEN 1024 +#define VPD_INFO_FLD_HDR_SIZE 3 + +/* + * csio_hw_seeprom_read - read a serial EEPROM location + * @hw: hw to read + * @addr: EEPROM virtual address + * @data: where to store the read data + * + * Read a 32-bit word from a location in serial EEPROM using the card's PCI + * VPD capability. Note that this function must be called with a virtual + * address. + */ +static int +csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data) +{ + uint16_t val = 0; + int attempts = EEPROM_MAX_RD_POLL; + uint32_t base = hw->params.pci.vpd_cap_addr; + + if (addr >= EEPROMVSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr); + + do { + udelay(10); + pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val); + } while (!(val & PCI_VPD_ADDR_F) && --attempts); + + if (!(val & PCI_VPD_ADDR_F)) { + csio_err(hw, "reading EEPROM address 0x%x failed\n", addr); + return -EINVAL; + } + + pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data); + *data = le32_to_cpu(*(__le32 *)data); + + return 0; +} + +/* + * Partial EEPROM Vital Product Data structure. Includes only the ID and + * VPD-R sections. + */ +struct t4_vpd_hdr { + u8 id_tag; + u8 id_len[2]; + u8 id_data[ID_LEN]; + u8 vpdr_tag; + u8 vpdr_len[2]; +}; + +/* + * csio_hw_get_vpd_keyword_val - Locates an information field keyword in + * the VPD + * @v: Pointer to buffered vpd data structure + * @kw: The keyword to search for + * + * Returns the value of the information field keyword or + * -EINVAL otherwise. + */ +static int +csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw) +{ + int32_t i; + int32_t offset , len; + const uint8_t *buf = &v->id_tag; + const uint8_t *vpdr_len = &v->vpdr_tag; + offset = sizeof(struct t4_vpd_hdr); + len = (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8); + + if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN) + return -EINVAL; + + for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) { + if (memcmp(buf + i , kw, 2) == 0) { + i += VPD_INFO_FLD_HDR_SIZE; + return i; + } + + i += VPD_INFO_FLD_HDR_SIZE + buf[i+2]; + } + + return -EINVAL; +} + +static int +csio_pci_capability(struct pci_dev *pdev, int cap, int *pos) +{ + *pos = pci_find_capability(pdev, cap); + if (*pos) + return 0; + + return -1; +} + +/* + * csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM + * @hw: HW module + * @p: where to store the parameters + * + * Reads card parameters stored in VPD EEPROM. + */ +static int +csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p) +{ + int i, ret, ec, sn, addr; + uint8_t *vpd, csum; + const struct t4_vpd_hdr *v; + /* To get around compilation warning from strstrip */ + char *s; + + if (csio_is_valid_vpd(hw)) + return 0; + + ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD, + &hw->params.pci.vpd_cap_addr); + if (ret) + return -EINVAL; + + vpd = kzalloc(VPD_LEN, GFP_ATOMIC); + if (vpd == NULL) + return -ENOMEM; + + /* + * Card information normally starts at VPD_BASE but early cards had + * it at 0. + */ + ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd)); + addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; + + for (i = 0; i < VPD_LEN; i += 4) { + ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i)); + if (ret) { + kfree(vpd); + return ret; + } + } + + /* Reset the VPD flag! */ + hw->flags &= (~CSIO_HWF_VPD_VALID); + + v = (const struct t4_vpd_hdr *)vpd; + +#define FIND_VPD_KW(var, name) do { \ + var = csio_hw_get_vpd_keyword_val(v, name); \ + if (var < 0) { \ + csio_err(hw, "missing VPD keyword " name "\n"); \ + kfree(vpd); \ + return -EINVAL; \ + } \ +} while (0) + + FIND_VPD_KW(i, "RV"); + for (csum = 0; i >= 0; i--) + csum += vpd[i]; + + if (csum) { + csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum); + kfree(vpd); + return -EINVAL; + } + FIND_VPD_KW(ec, "EC"); + FIND_VPD_KW(sn, "SN"); +#undef FIND_VPD_KW + + memcpy(p->id, v->id_data, ID_LEN); + s = strstrip(p->id); + memcpy(p->ec, vpd + ec, EC_LEN); + s = strstrip(p->ec); + i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2]; + memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); + s = strstrip(p->sn); + + csio_valid_vpd_copied(hw); + + kfree(vpd); + return 0; +} + +/* + * csio_hw_sf1_read - read data from the serial flash + * @hw: the HW module + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int +csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont, + int32_t lock, uint32_t *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F) + return -EBUSY; + + csio_wr_reg32(hw, SF_LOCK_V(lock) | SF_CONT_V(cont) | + BYTECNT_V(byte_cnt - 1), SF_OP_A); + ret = csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, + 10, NULL); + if (!ret) + *valp = csio_rd_reg32(hw, SF_DATA_A); + return ret; +} + +/* + * csio_hw_sf1_write - write data to the serial flash + * @hw: the HW module + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int +csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont, + int32_t lock, uint32_t val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F) + return -EBUSY; + + csio_wr_reg32(hw, val, SF_DATA_A); + csio_wr_reg32(hw, SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | + OP_V(1) | SF_LOCK_V(lock), SF_OP_A); + + return csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, + 10, NULL); +} + +/* + * csio_hw_flash_wait_op - wait for a flash operation to complete + * @hw: the HW module + * @attempts: max number of polls of the status register + * @delay: delay between polls in ms + * + * Wait for a flash operation to complete by polling the status register. + */ +static int +csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay) +{ + int ret; + uint32_t status; + + while (1) { + ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS); + if (ret != 0) + return ret; + + ret = csio_hw_sf1_read(hw, 1, 0, 1, &status); + if (ret != 0) + return ret; + + if (!(status & 1)) + return 0; + if (--attempts == 0) + return -EAGAIN; + if (delay) + msleep(delay); + } +} + +/* + * csio_hw_read_flash - read words from serial flash + * @hw: the HW module + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianess. + */ +static int +csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords, + uint32_t *data, int32_t byte_oriented) +{ + int ret; + + if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3)) + return -EINVAL; + + addr = swab32(addr) | SF_RD_DATA_FAST; + + ret = csio_hw_sf1_write(hw, 4, 1, 0, addr); + if (ret != 0) + return ret; + + ret = csio_hw_sf1_read(hw, 1, 1, 0, data); + if (ret != 0) + return ret; + + for ( ; nwords; nwords--, data++) { + ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data); + if (nwords == 1) + csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ + if (ret) + return ret; + if (byte_oriented) + *data = (__force __u32) htonl(*data); + } + return 0; +} + +/* + * csio_hw_write_flash - write up to a page of data to the serial flash + * @hw: the hw + * @addr: the start address to write + * @n: length of data to write in bytes + * @data: the data to write + * + * Writes up to a page of data (256 bytes) to the serial flash starting + * at the given address. All the data must be written to the same page. + */ +static int +csio_hw_write_flash(struct csio_hw *hw, uint32_t addr, + uint32_t n, const uint8_t *data) +{ + int ret = -EINVAL; + uint32_t buf[64]; + uint32_t i, c, left, val, offset = addr & 0xff; + + if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE) + return -EINVAL; + + val = swab32(addr) | SF_PROG_PAGE; + + ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); + if (ret != 0) + goto unlock; + + ret = csio_hw_sf1_write(hw, 4, 1, 1, val); + if (ret != 0) + goto unlock; + + for (left = n; left; left -= c) { + c = min(left, 4U); + for (val = 0, i = 0; i < c; ++i) + val = (val << 8) + *data++; + + ret = csio_hw_sf1_write(hw, c, c != left, 1, val); + if (ret) + goto unlock; + } + ret = csio_hw_flash_wait_op(hw, 8, 1); + if (ret) + goto unlock; + + csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ + + /* Read the page to verify the write succeeded */ + ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); + if (ret) + return ret; + + if (memcmp(data - n, (uint8_t *)buf + offset, n)) { + csio_err(hw, + "failed to correctly write the flash page at %#x\n", + addr); + return -EINVAL; + } + + return 0; + +unlock: + csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ + return ret; +} + +/* + * csio_hw_flash_erase_sectors - erase a range of flash sectors + * @hw: the HW module + * @start: the first sector to erase + * @end: the last sector to erase + * + * Erases the sectors in the given inclusive range. + */ +static int +csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end) +{ + int ret = 0; + + while (start <= end) { + + ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); + if (ret != 0) + goto out; + + ret = csio_hw_sf1_write(hw, 4, 0, 1, + SF_ERASE_SECTOR | (start << 8)); + if (ret != 0) + goto out; + + ret = csio_hw_flash_wait_op(hw, 14, 500); + if (ret != 0) + goto out; + + start++; + } +out: + if (ret) + csio_err(hw, "erase of flash sector %d failed, error %d\n", + start, ret); + csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ + return 0; +} + +static void +csio_hw_print_fw_version(struct csio_hw *hw, char *str) +{ + csio_info(hw, "%s: %u.%u.%u.%u\n", str, + FW_HDR_FW_VER_MAJOR_G(hw->fwrev), + FW_HDR_FW_VER_MINOR_G(hw->fwrev), + FW_HDR_FW_VER_MICRO_G(hw->fwrev), + FW_HDR_FW_VER_BUILD_G(hw->fwrev)); +} + +/* + * csio_hw_get_fw_version - read the firmware version + * @hw: HW module + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +static int +csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers) +{ + return csio_hw_read_flash(hw, FLASH_FW_START + + offsetof(struct fw_hdr, fw_ver), 1, + vers, 0); +} + +/* + * csio_hw_get_tp_version - read the TP microcode version + * @hw: HW module + * @vers: where to place the version + * + * Reads the TP microcode version from flash. + */ +static int +csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers) +{ + return csio_hw_read_flash(hw, FLASH_FW_START + + offsetof(struct fw_hdr, tp_microcode_ver), 1, + vers, 0); +} + +/* + * csio_hw_fw_dload - download firmware. + * @hw: HW module + * @fw_data: firmware image to write. + * @size: image size + * + * Write the supplied firmware image to the card's serial flash. + */ +static int +csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size) +{ + uint32_t csum; + int32_t addr; + int ret; + uint32_t i; + uint8_t first_page[SF_PAGE_SIZE]; + const __be32 *p = (const __be32 *)fw_data; + struct fw_hdr *hdr = (struct fw_hdr *)fw_data; + uint32_t sf_sec_size; + + if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) { + csio_err(hw, "Serial Flash data invalid\n"); + return -EINVAL; + } + + if (!size) { + csio_err(hw, "FW image has no data\n"); + return -EINVAL; + } + + if (size & 511) { + csio_err(hw, "FW image size not multiple of 512 bytes\n"); + return -EINVAL; + } + + if (ntohs(hdr->len512) * 512 != size) { + csio_err(hw, "FW image size differs from size in FW header\n"); + return -EINVAL; + } + + if (size > FLASH_FW_MAX_SIZE) { + csio_err(hw, "FW image too large, max is %u bytes\n", + FLASH_FW_MAX_SIZE); + return -EINVAL; + } + + for (csum = 0, i = 0; i < size / sizeof(csum); i++) + csum += ntohl(p[i]); + + if (csum != 0xffffffff) { + csio_err(hw, "corrupted firmware image, checksum %#x\n", csum); + return -EINVAL; + } + + sf_sec_size = hw->params.sf_size / hw->params.sf_nsec; + i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ + + csio_dbg(hw, "Erasing sectors... start:%d end:%d\n", + FLASH_FW_START_SEC, FLASH_FW_START_SEC + i - 1); + + ret = csio_hw_flash_erase_sectors(hw, FLASH_FW_START_SEC, + FLASH_FW_START_SEC + i - 1); + if (ret) { + csio_err(hw, "Flash Erase failed\n"); + goto out; + } + + /* + * We write the correct version at the end so the driver can see a bad + * version if the FW write fails. Start by writing a copy of the + * first page with a bad version. + */ + memcpy(first_page, fw_data, SF_PAGE_SIZE); + ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); + ret = csio_hw_write_flash(hw, FLASH_FW_START, SF_PAGE_SIZE, first_page); + if (ret) + goto out; + + csio_dbg(hw, "Writing Flash .. start:%d end:%d\n", + FW_IMG_START, FW_IMG_START + size); + + addr = FLASH_FW_START; + for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { + addr += SF_PAGE_SIZE; + fw_data += SF_PAGE_SIZE; + ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data); + if (ret) + goto out; + } + + ret = csio_hw_write_flash(hw, + FLASH_FW_START + + offsetof(struct fw_hdr, fw_ver), + sizeof(hdr->fw_ver), + (const uint8_t *)&hdr->fw_ver); + +out: + if (ret) + csio_err(hw, "firmware download failed, error %d\n", ret); + return ret; +} + +static int +csio_hw_get_flash_params(struct csio_hw *hw) +{ + /* Table for non-Numonix supported flash parts. Numonix parts are left + * to the preexisting code. All flash parts have 64KB sectors. + */ + static struct flash_desc { + u32 vendor_and_model_id; + u32 size_mb; + } supported_flash[] = { + { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ + }; + + u32 part, manufacturer; + u32 density, size = 0; + u32 flashid = 0; + int ret; + + ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID); + if (!ret) + ret = csio_hw_sf1_read(hw, 3, 0, 1, &flashid); + csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ + if (ret) + return ret; + + /* Check to see if it's one of our non-standard supported Flash parts. + */ + for (part = 0; part < ARRAY_SIZE(supported_flash); part++) + if (supported_flash[part].vendor_and_model_id == flashid) { + hw->params.sf_size = supported_flash[part].size_mb; + hw->params.sf_nsec = + hw->params.sf_size / SF_SEC_SIZE; + goto found; + } + + /* Decode Flash part size. The code below looks repetative with + * common encodings, but that's not guaranteed in the JEDEC + * specification for the Read JADEC ID command. The only thing that + * we're guaranteed by the JADEC specification is where the + * Manufacturer ID is in the returned result. After that each + * Manufacturer ~could~ encode things completely differently. + * Note, all Flash parts must have 64KB sectors. + */ + manufacturer = flashid & 0xff; + switch (manufacturer) { + case 0x20: { /* Micron/Numonix */ + /* This Density -> Size decoding table is taken from Micron + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x14 ... 0x19: /* 1MB - 32MB */ + size = 1 << density; + break; + case 0x20: /* 64MB */ + size = 1 << 26; + break; + case 0x21: /* 128MB */ + size = 1 << 27; + break; + case 0x22: /* 256MB */ + size = 1 << 28; + } + break; + } + case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */ + /* This Density -> Size decoding table is taken from ISSI + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x16: /* 32 MB */ + size = 1 << 25; + break; + case 0x17: /* 64MB */ + size = 1 << 26; + } + break; + } + case 0xc2: /* Macronix */ + case 0xef: /* Winbond */ { + /* This Density -> Size decoding table is taken from + * Macronix and Winbond Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: /* 8MB */ + case 0x18: /* 16MB */ + size = 1 << density; + } + } + } + + /* If we didn't recognize the FLASH part, that's no real issue: the + * Hardware/Software contract says that Hardware will _*ALWAYS*_ + * use a FLASH part which is at least 4MB in size and has 64KB + * sectors. The unrecognized FLASH part is likely to be much larger + * than 4MB, but that's all we really need. + */ + if (size == 0) { + csio_warn(hw, "Unknown Flash Part, ID = %#x, assuming 4MB\n", + flashid); + size = 1 << 22; + } + + /* Store decoded Flash size */ + hw->params.sf_size = size; + hw->params.sf_nsec = size / SF_SEC_SIZE; + +found: + if (hw->params.sf_size < FLASH_MIN_SIZE) + csio_warn(hw, "WARNING: Flash Part ID %#x, size %#x < %#x\n", + flashid, hw->params.sf_size, FLASH_MIN_SIZE); + return 0; +} + +/*****************************************************************************/ +/* HW State machine assists */ +/*****************************************************************************/ + +static int +csio_hw_dev_ready(struct csio_hw *hw) +{ + uint32_t reg; + int cnt = 6; + int src_pf; + + while (((reg = csio_rd_reg32(hw, PL_WHOAMI_A)) == 0xFFFFFFFF) && + (--cnt != 0)) + mdelay(100); + + if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK)) + src_pf = SOURCEPF_G(reg); + else + src_pf = T6_SOURCEPF_G(reg); + + if ((cnt == 0) && (((int32_t)(src_pf) < 0) || + (src_pf >= CSIO_MAX_PFN))) { + csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt); + return -EIO; + } + + hw->pfn = src_pf; + + return 0; +} + +/* + * csio_do_hello - Perform the HELLO FW Mailbox command and process response. + * @hw: HW module + * @state: Device state + * + * FW_HELLO_CMD has to be polled for completion. + */ +static int +csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state) +{ + struct csio_mb *mbp; + int rv = 0; + enum fw_retval retval; + uint8_t mpfn; + char state_str[16]; + int retries = FW_CMD_HELLO_RETRIES; + + memset(state_str, 0, sizeof(state_str)); + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + rv = -ENOMEM; + CSIO_INC_STATS(hw, n_err_nomem); + goto out; + } + +retry: + csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, + hw->pfn, CSIO_MASTER_MAY, NULL); + + rv = csio_mb_issue(hw, mbp); + if (rv) { + csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv); + goto out_free_mb; + } + + csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn); + if (retval != FW_SUCCESS) { + csio_err(hw, "HELLO cmd failed with ret: %d\n", retval); + rv = -EINVAL; + goto out_free_mb; + } + + /* Firmware has designated us to be master */ + if (hw->pfn == mpfn) { + hw->flags |= CSIO_HWF_MASTER; + } else if (*state == CSIO_DEV_STATE_UNINIT) { + /* + * If we're not the Master PF then we need to wait around for + * the Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable + * PF and there is no current Master PF; a Master PF may show up + * momentarily and we wouldn't want to fail pointlessly. (This + * can happen when an OS loads lots of different drivers rapidly + * at the same time). In this case, the Master PF returned by + * the firmware will be PCIE_FW_MASTER_MASK so the test below + * will work ... + */ + + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + uint32_t pcie_fw; + + spin_unlock_irq(&hw->lock); + msleep(50); + spin_lock_irq(&hw->lock); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = csio_rd_reg32(hw, PCIE_FW_A); + if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + rv = -ETIMEDOUT; + break; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & PCIE_FW_ERR_F) { + *state = CSIO_DEV_STATE_ERR; + rv = -ETIMEDOUT; + } else if (pcie_fw & PCIE_FW_INIT_F) + *state = CSIO_DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (mpfn == PCIE_FW_MASTER_M && + (pcie_fw & PCIE_FW_MASTER_VLD_F)) + mpfn = PCIE_FW_MASTER_G(pcie_fw); + break; + } + hw->flags &= ~CSIO_HWF_MASTER; + } + + switch (*state) { + case CSIO_DEV_STATE_UNINIT: + strcpy(state_str, "Initializing"); + break; + case CSIO_DEV_STATE_INIT: + strcpy(state_str, "Initialized"); + break; + case CSIO_DEV_STATE_ERR: + strcpy(state_str, "Error"); + break; + default: + strcpy(state_str, "Unknown"); + break; + } + + if (hw->pfn == mpfn) + csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n", + hw->pfn, state_str); + else + csio_info(hw, + "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n", + hw->pfn, mpfn, state_str); + +out_free_mb: + mempool_free(mbp, hw->mb_mempool); +out: + return rv; +} + +/* + * csio_do_bye - Perform the BYE FW Mailbox command and process response. + * @hw: HW module + * + */ +static int +csio_do_bye(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of BYE command failed\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_do_reset- Perform the device reset. + * @hw: HW module + * @fw_rst: FW reset + * + * If fw_rst is set, issues FW reset mbox cmd otherwise + * does PIO reset. + * Performs reset of the function. + */ +static int +csio_do_reset(struct csio_hw *hw, bool fw_rst) +{ + struct csio_mb *mbp; + enum fw_retval retval; + + if (!fw_rst) { + /* PIO reset */ + csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); + mdelay(2000); + return 0; + } + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, + PIORSTMODE_F | PIORST_F, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of RESET command failed.n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +static int +csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp) +{ + struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb; + uint16_t caps; + + caps = ntohs(rsp->fcoecaps); + + if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) { + csio_err(hw, "No FCoE Initiator capability in the firmware.\n"); + return -EINVAL; + } + + if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) { + csio_err(hw, "No FCoE Control Offload capability\n"); + return -EINVAL; + } + + return 0; +} + +/* + * csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET + * @hw: the HW module + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * PCIE_FW_MASTER_MASK). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +static int +csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force) +{ + enum fw_retval retval = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= PCIE_FW_MASTER_M) { + struct csio_mb *mbp; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, + PIORSTMODE_F | PIORST_F, FW_RESET_CMD_HALT_F, + NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of RESET command failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + mempool_free(mbp, hw->mb_mempool); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (retval == 0 || force) { + csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F); + csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, + PCIE_FW_HALT_F); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return retval ? -EINVAL : 0; +} + +/* + * csio_hw_fw_restart - restart the firmware by taking the uP out of RESET + * @hw: the HW module + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by csio_hw_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +static int +csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= PCIE_FW_MASTER_M) { + csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0); + msleep(100); + if (csio_do_reset(hw, true) == 0) + return 0; + } + + csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); + msleep(2000); + } else { + int ms; + + csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(csio_rd_reg32(hw, PCIE_FW_A) & PCIE_FW_HALT_F)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/* + * csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW + * @hw: the HW module + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +static int +csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox, + const u8 *fw_data, uint32_t size, int32_t force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + ret = csio_hw_fw_halt(hw, mbox, force); + if (ret != 0 && !force) + return ret; + + ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size); + if (ret != 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return csio_hw_fw_restart(hw, mbox, reset); +} + +/* + * csio_get_device_params - Get device parameters. + * @hw: HW module + * + */ +static int +csio_get_device_params(struct csio_hw *hw) +{ + struct csio_wrm *wrm = csio_hw_to_wrm(hw); + struct csio_mb *mbp; + enum fw_retval retval; + u32 param[6]; + int i, j = 0; + + /* Initialize portids to -1 */ + for (i = 0; i < CSIO_MAX_PPORTS; i++) + hw->pport[i].portid = -1; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get port vec information. */ + param[0] = FW_PARAM_DEV(PORTVEC); + + /* Get Core clock. */ + param[1] = FW_PARAM_DEV(CCLK); + + /* Get EQ id start and end. */ + param[2] = FW_PARAM_PFVF(EQ_START); + param[3] = FW_PARAM_PFVF(EQ_END); + + /* Get IQ id start and end. */ + param[4] = FW_PARAM_PFVF(IQFLINT_START); + param[5] = FW_PARAM_PFVF(IQFLINT_END); + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, + ARRAY_SIZE(param), param, NULL, false, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + ARRAY_SIZE(param), param); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + /* cache the information. */ + hw->port_vec = param[0]; + hw->vpd.cclk = param[1]; + wrm->fw_eq_start = param[2]; + wrm->fw_iq_start = param[4]; + + /* Using FW configured max iqs & eqs */ + if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) || + !csio_is_hw_master(hw)) { + hw->cfg_niq = param[5] - param[4] + 1; + hw->cfg_neq = param[3] - param[2] + 1; + csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n", + hw->cfg_niq, hw->cfg_neq); + } + + hw->port_vec &= csio_port_mask; + + hw->num_pports = hweight32(hw->port_vec); + + csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n", + hw->port_vec, hw->num_pports); + + for (i = 0; i < hw->num_pports; i++) { + while ((hw->port_vec & (1 << j)) == 0) + j++; + hw->pport[i].portid = j++; + csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid); + } + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + + +/* + * csio_config_device_caps - Get and set device capabilities. + * @hw: HW module + * + */ +static int +csio_config_device_caps(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + int rv = -EINVAL; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get device capabilities */ + csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n"); + goto out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval); + goto out; + } + + /* Validate device capabilities */ + rv = csio_hw_validate_caps(hw, mbp); + if (rv != 0) + goto out; + + /* Don't config device capabilities if already configured */ + if (hw->fw_state == CSIO_DEV_STATE_INIT) { + rv = 0; + goto out; + } + + /* Write back desired device capabilities */ + csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true, + false, true, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n"); + goto out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval); + goto out; + } + + rv = 0; +out: + mempool_free(mbp, hw->mb_mempool); + return rv; +} + +static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec) +{ + enum cc_fec cc_fec = 0; + + if (fw_fec & FW_PORT_CAP32_FEC_RS) + cc_fec |= FEC_RS; + if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS) + cc_fec |= FEC_BASER_RS; + + return cc_fec; +} + +static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause) +{ + fw_port_cap32_t fw_pause = 0; + + if (cc_pause & PAUSE_RX) + fw_pause |= FW_PORT_CAP32_FC_RX; + if (cc_pause & PAUSE_TX) + fw_pause |= FW_PORT_CAP32_FC_TX; + + return fw_pause; +} + +static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec) +{ + fw_port_cap32_t fw_fec = 0; + + if (cc_fec & FEC_RS) + fw_fec |= FW_PORT_CAP32_FEC_RS; + if (cc_fec & FEC_BASER_RS) + fw_fec |= FW_PORT_CAP32_FEC_BASER_RS; + + return fw_fec; +} + +/** + * fwcap_to_fwspeed - return highest speed in Port Capabilities + * @acaps: advertised Port Capabilities + * + * Get the highest speed for the port from the advertised Port + * Capabilities. + */ +fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps) +{ + #define TEST_SPEED_RETURN(__caps_speed) \ + do { \ + if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \ + return FW_PORT_CAP32_SPEED_##__caps_speed; \ + } while (0) + + TEST_SPEED_RETURN(400G); + TEST_SPEED_RETURN(200G); + TEST_SPEED_RETURN(100G); + TEST_SPEED_RETURN(50G); + TEST_SPEED_RETURN(40G); + TEST_SPEED_RETURN(25G); + TEST_SPEED_RETURN(10G); + TEST_SPEED_RETURN(1G); + TEST_SPEED_RETURN(100M); + + #undef TEST_SPEED_RETURN + + return 0; +} + +/** + * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits + * @caps16: a 16-bit Port Capabilities value + * + * Returns the equivalent 32-bit Port Capabilities value. + */ +fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16) +{ + fw_port_cap32_t caps32 = 0; + + #define CAP16_TO_CAP32(__cap) \ + do { \ + if (caps16 & FW_PORT_CAP_##__cap) \ + caps32 |= FW_PORT_CAP32_##__cap; \ + } while (0) + + CAP16_TO_CAP32(SPEED_100M); + CAP16_TO_CAP32(SPEED_1G); + CAP16_TO_CAP32(SPEED_25G); + CAP16_TO_CAP32(SPEED_10G); + CAP16_TO_CAP32(SPEED_40G); + CAP16_TO_CAP32(SPEED_100G); + CAP16_TO_CAP32(FC_RX); + CAP16_TO_CAP32(FC_TX); + CAP16_TO_CAP32(ANEG); + CAP16_TO_CAP32(MDIAUTO); + CAP16_TO_CAP32(MDISTRAIGHT); + CAP16_TO_CAP32(FEC_RS); + CAP16_TO_CAP32(FEC_BASER_RS); + CAP16_TO_CAP32(802_3_PAUSE); + CAP16_TO_CAP32(802_3_ASM_DIR); + + #undef CAP16_TO_CAP32 + + return caps32; +} + +/** + * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits + * @caps32: a 32-bit Port Capabilities value + * + * Returns the equivalent 16-bit Port Capabilities value. Note that + * not all 32-bit Port Capabilities can be represented in the 16-bit + * Port Capabilities and some fields/values may not make it. + */ +fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32) +{ + fw_port_cap16_t caps16 = 0; + + #define CAP32_TO_CAP16(__cap) \ + do { \ + if (caps32 & FW_PORT_CAP32_##__cap) \ + caps16 |= FW_PORT_CAP_##__cap; \ + } while (0) + + CAP32_TO_CAP16(SPEED_100M); + CAP32_TO_CAP16(SPEED_1G); + CAP32_TO_CAP16(SPEED_10G); + CAP32_TO_CAP16(SPEED_25G); + CAP32_TO_CAP16(SPEED_40G); + CAP32_TO_CAP16(SPEED_100G); + CAP32_TO_CAP16(FC_RX); + CAP32_TO_CAP16(FC_TX); + CAP32_TO_CAP16(802_3_PAUSE); + CAP32_TO_CAP16(802_3_ASM_DIR); + CAP32_TO_CAP16(ANEG); + CAP32_TO_CAP16(FORCE_PAUSE); + CAP32_TO_CAP16(MDIAUTO); + CAP32_TO_CAP16(MDISTRAIGHT); + CAP32_TO_CAP16(FEC_RS); + CAP32_TO_CAP16(FEC_BASER_RS); + + #undef CAP32_TO_CAP16 + + return caps16; +} + +/** + * lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities + * @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value + * + * Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new + * 32-bit Port Capabilities value. + */ +fw_port_cap32_t lstatus_to_fwcap(u32 lstatus) +{ + fw_port_cap32_t linkattr = 0; + + /* The format of the Link Status in the old + * 16-bit Port Information message isn't the same as the + * 16-bit Port Capabilities bitfield used everywhere else. + */ + if (lstatus & FW_PORT_CMD_RXPAUSE_F) + linkattr |= FW_PORT_CAP32_FC_RX; + if (lstatus & FW_PORT_CMD_TXPAUSE_F) + linkattr |= FW_PORT_CAP32_FC_TX; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) + linkattr |= FW_PORT_CAP32_SPEED_100M; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) + linkattr |= FW_PORT_CAP32_SPEED_1G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) + linkattr |= FW_PORT_CAP32_SPEED_10G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + linkattr |= FW_PORT_CAP32_SPEED_25G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) + linkattr |= FW_PORT_CAP32_SPEED_40G; + if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + linkattr |= FW_PORT_CAP32_SPEED_100G; + + return linkattr; +} + +/** + * csio_init_link_config - initialize a link's SW state + * @lc: pointer to structure holding the link state + * @pcaps: link Port Capabilities + * @acaps: link current Advertised Port Capabilities + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/flow-control/autonegotiation settings. + */ +static void csio_init_link_config(struct link_config *lc, fw_port_cap32_t pcaps, + fw_port_cap32_t acaps) +{ + lc->pcaps = pcaps; + lc->def_acaps = acaps; + lc->lpacaps = 0; + lc->speed_caps = 0; + lc->speed = 0; + lc->requested_fc = PAUSE_RX | PAUSE_TX; + lc->fc = lc->requested_fc; + + /* + * For Forward Error Control, we default to whatever the Firmware + * tells us the Link is currently advertising. + */ + lc->requested_fec = FEC_AUTO; + lc->fec = fwcap_to_cc_fec(lc->def_acaps); + + /* If the Port is capable of Auto-Negtotiation, initialize it as + * "enabled" and copy over all of the Physical Port Capabilities + * to the Advertised Port Capabilities. Otherwise mark it as + * Auto-Negotiate disabled and select the highest supported speed + * for the link. Note parallel structure in t4_link_l1cfg_core() + * and t4_handle_get_port_info(). + */ + if (lc->pcaps & FW_PORT_CAP32_ANEG) { + lc->acaps = lc->pcaps & ADVERT_MASK; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->acaps = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +static void csio_link_l1cfg(struct link_config *lc, uint16_t fw_caps, + uint32_t *rcaps) +{ + unsigned int fw_mdi = FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO); + fw_port_cap32_t fw_fc, cc_fec, fw_fec, lrcap; + + lc->link_ok = 0; + + /* + * Convert driver coding of Pause Frame Flow Control settings into the + * Firmware's API. + */ + fw_fc = cc_to_fwcap_pause(lc->requested_fc); + + /* + * Convert Common Code Forward Error Control settings into the + * Firmware's API. If the current Requested FEC has "Automatic" + * (IEEE 802.3) specified, then we use whatever the Firmware + * sent us as part of it's IEEE 802.3-based interpratation of + * the Transceiver Module EPROM FEC parameters. Otherwise we + * use whatever is in the current Requested FEC settings. + */ + if (lc->requested_fec & FEC_AUTO) + cc_fec = fwcap_to_cc_fec(lc->def_acaps); + else + cc_fec = lc->requested_fec; + fw_fec = cc_to_fwcap_fec(cc_fec); + + /* Figure out what our Requested Port Capabilities are going to be. + * Note parallel structure in t4_handle_get_port_info() and + * init_link_config(). + */ + if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) { + lrcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec; + lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; + lc->fec = cc_fec; + } else if (lc->autoneg == AUTONEG_DISABLE) { + lrcap = lc->speed_caps | fw_fc | fw_fec | fw_mdi; + lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; + lc->fec = cc_fec; + } else { + lrcap = lc->acaps | fw_fc | fw_fec | fw_mdi; + } + + *rcaps = lrcap; +} + +/* + * csio_enable_ports - Bring up all available ports. + * @hw: HW module. + * + */ +static int +csio_enable_ports(struct csio_hw *hw) +{ + struct csio_mb *mbp; + u16 fw_caps = FW_CAPS_UNKNOWN; + enum fw_retval retval; + uint8_t portid; + fw_port_cap32_t pcaps, acaps, rcaps; + int i; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + for (i = 0; i < hw->num_pports; i++) { + portid = hw->pport[i].portid; + + if (fw_caps == FW_CAPS_UNKNOWN) { + u32 param, val; + + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32)); + val = 1; + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, + hw->pfn, 0, 1, ¶m, &val, true, + NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PARAMS_CMD(r) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + 0, NULL); + fw_caps = retval ? FW_CAPS16 : FW_CAPS32; + } + + /* Read PORT information */ + csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, + false, 0, fw_caps, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_port_rsp(hw, mbp, &retval, fw_caps, + &pcaps, &acaps); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n", + portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_init_link_config(&hw->pport[i].link_cfg, pcaps, acaps); + + csio_link_l1cfg(&hw->pport[i].link_cfg, fw_caps, &rcaps); + + /* Write back PORT information */ + csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, + true, rcaps, fw_caps, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n", + portid); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n", + portid, retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + } /* For all ports */ + + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +/* + * csio_get_fcoe_resinfo - Read fcoe fw resource info. + * @hw: HW module + * Issued with lock held. + */ +static int +csio_get_fcoe_resinfo(struct csio_hw *hw) +{ + struct csio_fcoe_res_info *res_info = &hw->fres_info; + struct fw_fcoe_res_info_cmd *rsp; + struct csio_mb *mbp; + enum fw_retval retval; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* Get FCoE FW resource information */ + csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb); + retval = FW_CMD_RETVAL_G(ntohl(rsp->retval_len16)); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + res_info->e_d_tov = ntohs(rsp->e_d_tov); + res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq); + res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els); + res_info->r_r_tov = ntohs(rsp->r_r_tov); + res_info->max_xchgs = ntohl(rsp->max_xchgs); + res_info->max_ssns = ntohl(rsp->max_ssns); + res_info->used_xchgs = ntohl(rsp->used_xchgs); + res_info->used_ssns = ntohl(rsp->used_ssns); + res_info->max_fcfs = ntohl(rsp->max_fcfs); + res_info->max_vnps = ntohl(rsp->max_vnps); + res_info->used_fcfs = ntohl(rsp->used_fcfs); + res_info->used_vnps = ntohl(rsp->used_vnps); + + csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns, + res_info->max_xchgs); + mempool_free(mbp, hw->mb_mempool); + + return 0; +} + +static int +csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param) +{ + struct csio_mb *mbp; + enum fw_retval retval; + u32 _param[1]; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + _param[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF)); + + csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, + ARRAY_SIZE(_param), _param, NULL, false, NULL); + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + csio_mb_process_read_params_rsp(hw, mbp, &retval, + ARRAY_SIZE(_param), _param); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", + retval); + mempool_free(mbp, hw->mb_mempool); + return -EINVAL; + } + + mempool_free(mbp, hw->mb_mempool); + *param = _param[0]; + + return 0; +} + +static int +csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path) +{ + int ret = 0; + const struct firmware *cf; + struct pci_dev *pci_dev = hw->pdev; + struct device *dev = &pci_dev->dev; + unsigned int mtype = 0, maddr = 0; + uint32_t *cfg_data; + int value_to_add = 0; + const char *fw_cfg_file; + + if (csio_is_t5(pci_dev->device & CSIO_HW_CHIP_MASK)) + fw_cfg_file = FW_CFG_NAME_T5; + else + fw_cfg_file = FW_CFG_NAME_T6; + + if (request_firmware(&cf, fw_cfg_file, dev) < 0) { + csio_err(hw, "could not find config file %s, err: %d\n", + fw_cfg_file, ret); + return -ENOENT; + } + + if (cf->size%4 != 0) + value_to_add = 4 - (cf->size % 4); + + cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL); + if (cfg_data == NULL) { + ret = -ENOMEM; + goto leave; + } + + memcpy((void *)cfg_data, (const void *)cf->data, cf->size); + if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0) { + ret = -EINVAL; + goto leave; + } + + mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param); + maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16; + + ret = csio_memory_write(hw, mtype, maddr, + cf->size + value_to_add, cfg_data); + + if ((ret == 0) && (value_to_add != 0)) { + union { + u32 word; + char buf[4]; + } last; + size_t size = cf->size & ~0x3; + int i; + + last.word = cfg_data[size >> 2]; + for (i = value_to_add; i < 4; i++) + last.buf[i] = 0; + ret = csio_memory_write(hw, mtype, maddr + size, 4, &last.word); + } + if (ret == 0) { + csio_info(hw, "config file upgraded to %s\n", fw_cfg_file); + snprintf(path, 64, "%s%s", "/lib/firmware/", fw_cfg_file); + } + +leave: + kfree(cfg_data); + release_firmware(cf); + return ret; +} + +/* + * HW initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration -- either using the configuration + * file stored in flash on the adapter or using a filesystem-local file + * if available. + * + * If we don't have configuration file support in the firmware, then we'll + * have to set things up the old fashioned way with hard-coded register + * writes and firmware commands ... + */ + +/* + * Attempt to initialize the HW via a Firmware Configuration File. + */ +static int +csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param) +{ + struct csio_mb *mbp = NULL; + struct fw_caps_config_cmd *caps_cmd; + unsigned int mtype, maddr; + int rv = -EINVAL; + uint32_t finiver = 0, finicsum = 0, cfcsum = 0; + char path[64]; + char *config_name = NULL; + + /* + * Reset device if necessary + */ + if (reset) { + rv = csio_do_reset(hw, true); + if (rv != 0) + goto bye; + } + + /* + * If we have a configuration file in host , + * then use that. Otherwise, use the configuration file stored + * in the HW flash ... + */ + spin_unlock_irq(&hw->lock); + rv = csio_hw_flash_config(hw, fw_cfg_param, path); + spin_lock_irq(&hw->lock); + if (rv != 0) { + /* + * config file was not found. Use default + * config file from flash. + */ + config_name = "On FLASH"; + mtype = FW_MEMTYPE_CF_FLASH; + maddr = hw->chip_ops->chip_flash_cfg_addr(hw); + } else { + config_name = path; + mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param); + maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16; + } + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + return -ENOMEM; + } + /* + * Tell the firmware to process the indicated Configuration File. + * If there are no errors and the caller has provided return value + * pointers for the [fini] section version, checksum and computed + * checksum, pass those back to the caller. + */ + caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb); + CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); + caps_cmd->op_to_write = + htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + caps_cmd->cfvalid_to_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID_F | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) | + FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + rv = -EINVAL; + goto bye; + } + + rv = csio_mb_fw_retval(mbp); + /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware + * Configuration File in FLASH), our last gasp effort is to use the + * Firmware Configuration File which is embedded in the + * firmware. A very few early versions of the firmware didn't + * have one embedded but we can ignore those. + */ + if (rv == ENOENT) { + CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); + caps_cmd->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_READ_F); + caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + rv = -EINVAL; + goto bye; + } + + rv = csio_mb_fw_retval(mbp); + config_name = "Firmware Default"; + } + if (rv != FW_SUCCESS) + goto bye; + + finiver = ntohl(caps_cmd->finiver); + finicsum = ntohl(caps_cmd->finicsum); + cfcsum = ntohl(caps_cmd->cfcsum); + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd->op_to_write = + htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST_F | + FW_CMD_WRITE_F); + caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); + + if (csio_mb_issue(hw, mbp)) { + rv = -EINVAL; + goto bye; + } + + rv = csio_mb_fw_retval(mbp); + if (rv != FW_SUCCESS) { + csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); + goto bye; + } + + if (finicsum != cfcsum) { + csio_warn(hw, + "Config File checksum mismatch: csum=%#x, computed=%#x\n", + finicsum, cfcsum); + } + + /* Validate device capabilities */ + rv = csio_hw_validate_caps(hw, mbp); + if (rv != 0) + goto bye; + + mempool_free(mbp, hw->mb_mempool); + mbp = NULL; + + /* + * Note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants buried in the driver. + */ + hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto bye; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + + csio_info(hw, "Successfully configure using Firmware " + "Configuration File %s, version %#x, computed checksum %#x\n", + config_name, finiver, cfcsum); + return 0; + + /* + * Something bad happened. Return the error ... + */ +bye: + if (mbp) + mempool_free(mbp, hw->mb_mempool); + hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS; + csio_warn(hw, "Configuration file error %d\n", rv); + return rv; +} + +/* Is the given firmware API compatible with the one the driver was compiled + * with? + */ +static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2) +{ + + /* short circuit if it's the exact same firmware version */ + if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver) + return 1; + +#define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x) + if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) && + SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe)) + return 1; +#undef SAME_INTF + + return 0; +} + +/* The firmware in the filesystem is usable, but should it be installed? + * This routine explains itself in detail if it indicates the filesystem + * firmware should be installed. + */ +static int csio_should_install_fs_fw(struct csio_hw *hw, int card_fw_usable, + int k, int c) +{ + const char *reason; + + if (!card_fw_usable) { + reason = "incompatible or unusable"; + goto install; + } + + if (k > c) { + reason = "older than the version supported with this driver"; + goto install; + } + + return 0; + +install: + csio_err(hw, "firmware on card (%u.%u.%u.%u) is %s, " + "installing firmware %u.%u.%u.%u on card.\n", + FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), + FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason, + FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), + FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); + + return 1; +} + +static struct fw_info fw_info_array[] = { + { + .chip = CHELSIO_T5, + .fs_name = FW_CFG_NAME_T5, + .fw_mod_name = FW_FNAME_T5, + .fw_hdr = { + .chip = FW_HDR_CHIP_T5, + .fw_ver = __cpu_to_be32(FW_VERSION(T5)), + .intfver_nic = FW_INTFVER(T5, NIC), + .intfver_vnic = FW_INTFVER(T5, VNIC), + .intfver_ri = FW_INTFVER(T5, RI), + .intfver_iscsi = FW_INTFVER(T5, ISCSI), + .intfver_fcoe = FW_INTFVER(T5, FCOE), + }, + }, { + .chip = CHELSIO_T6, + .fs_name = FW_CFG_NAME_T6, + .fw_mod_name = FW_FNAME_T6, + .fw_hdr = { + .chip = FW_HDR_CHIP_T6, + .fw_ver = __cpu_to_be32(FW_VERSION(T6)), + .intfver_nic = FW_INTFVER(T6, NIC), + .intfver_vnic = FW_INTFVER(T6, VNIC), + .intfver_ri = FW_INTFVER(T6, RI), + .intfver_iscsi = FW_INTFVER(T6, ISCSI), + .intfver_fcoe = FW_INTFVER(T6, FCOE), + }, + } +}; + +static struct fw_info *find_fw_info(int chip) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(fw_info_array); i++) { + if (fw_info_array[i].chip == chip) + return &fw_info_array[i]; + } + return NULL; +} + +static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info, + const u8 *fw_data, unsigned int fw_size, + struct fw_hdr *card_fw, enum csio_dev_state state, + int *reset) +{ + int ret, card_fw_usable, fs_fw_usable; + const struct fw_hdr *fs_fw; + const struct fw_hdr *drv_fw; + + drv_fw = &fw_info->fw_hdr; + + /* Read the header of the firmware on the card */ + ret = csio_hw_read_flash(hw, FLASH_FW_START, + sizeof(*card_fw) / sizeof(uint32_t), + (uint32_t *)card_fw, 1); + if (ret == 0) { + card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw); + } else { + csio_err(hw, + "Unable to read card's firmware header: %d\n", ret); + card_fw_usable = 0; + } + + if (fw_data != NULL) { + fs_fw = (const void *)fw_data; + fs_fw_usable = fw_compatible(drv_fw, fs_fw); + } else { + fs_fw = NULL; + fs_fw_usable = 0; + } + + if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver && + (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) { + /* Common case: the firmware on the card is an exact match and + * the filesystem one is an exact match too, or the filesystem + * one is absent/incompatible. + */ + } else if (fs_fw_usable && state == CSIO_DEV_STATE_UNINIT && + csio_should_install_fs_fw(hw, card_fw_usable, + be32_to_cpu(fs_fw->fw_ver), + be32_to_cpu(card_fw->fw_ver))) { + ret = csio_hw_fw_upgrade(hw, hw->pfn, fw_data, + fw_size, 0); + if (ret != 0) { + csio_err(hw, + "failed to install firmware: %d\n", ret); + goto bye; + } + + /* Installed successfully, update the cached header too. */ + memcpy(card_fw, fs_fw, sizeof(*card_fw)); + card_fw_usable = 1; + *reset = 0; /* already reset as part of load_fw */ + } + + if (!card_fw_usable) { + uint32_t d, c, k; + + d = be32_to_cpu(drv_fw->fw_ver); + c = be32_to_cpu(card_fw->fw_ver); + k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0; + + csio_err(hw, "Cannot find a usable firmware: " + "chip state %d, " + "driver compiled with %d.%d.%d.%d, " + "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n", + state, + FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d), + FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d), + FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), + FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), + FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), + FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); + ret = -EINVAL; + goto bye; + } + + /* We're using whatever's on the card and it's known to be good. */ + hw->fwrev = be32_to_cpu(card_fw->fw_ver); + hw->tp_vers = be32_to_cpu(card_fw->tp_microcode_ver); + +bye: + return ret; +} + +/* + * Returns -EINVAL if attempts to flash the firmware failed, + * -ENOMEM if memory allocation failed else returns 0, + * if flashing was not attempted because the card had the + * latest firmware ECANCELED is returned + */ +static int +csio_hw_flash_fw(struct csio_hw *hw, int *reset) +{ + int ret = -ECANCELED; + const struct firmware *fw; + struct fw_info *fw_info; + struct fw_hdr *card_fw; + struct pci_dev *pci_dev = hw->pdev; + struct device *dev = &pci_dev->dev ; + const u8 *fw_data = NULL; + unsigned int fw_size = 0; + const char *fw_bin_file; + + /* This is the firmware whose headers the driver was compiled + * against + */ + fw_info = find_fw_info(CHELSIO_CHIP_VERSION(hw->chip_id)); + if (fw_info == NULL) { + csio_err(hw, + "unable to get firmware info for chip %d.\n", + CHELSIO_CHIP_VERSION(hw->chip_id)); + return -EINVAL; + } + + /* allocate memory to read the header of the firmware on the + * card + */ + card_fw = kmalloc(sizeof(*card_fw), GFP_KERNEL); + if (!card_fw) + return -ENOMEM; + + if (csio_is_t5(pci_dev->device & CSIO_HW_CHIP_MASK)) + fw_bin_file = FW_FNAME_T5; + else + fw_bin_file = FW_FNAME_T6; + + if (request_firmware(&fw, fw_bin_file, dev) < 0) { + csio_err(hw, "could not find firmware image %s, err: %d\n", + fw_bin_file, ret); + } else { + fw_data = fw->data; + fw_size = fw->size; + } + + /* upgrade FW logic */ + ret = csio_hw_prep_fw(hw, fw_info, fw_data, fw_size, card_fw, + hw->fw_state, reset); + + /* Cleaning up */ + if (fw != NULL) + release_firmware(fw); + kfree(card_fw); + return ret; +} + +static int csio_hw_check_fwver(struct csio_hw *hw) +{ + if (csio_is_t6(hw->pdev->device & CSIO_HW_CHIP_MASK) && + (hw->fwrev < CSIO_MIN_T6_FW)) { + csio_hw_print_fw_version(hw, "T6 unsupported fw"); + return -1; + } + + return 0; +} + +/* + * csio_hw_configure - Configure HW + * @hw - HW module + * + */ +static void +csio_hw_configure(struct csio_hw *hw) +{ + int reset = 1; + int rv; + u32 param[1]; + + rv = csio_hw_dev_ready(hw); + if (rv != 0) { + CSIO_INC_STATS(hw, n_err_fatal); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* HW version */ + hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV_A); + + /* Needed for FW download */ + rv = csio_hw_get_flash_params(hw); + if (rv != 0) { + csio_err(hw, "Failed to get serial flash params rv:%d\n", rv); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* Set PCIe completion timeout to 4 seconds */ + if (pci_is_pcie(hw->pdev)) + pcie_capability_clear_and_set_word(hw->pdev, PCI_EXP_DEVCTL2, + PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd); + + hw->chip_ops->chip_set_mem_win(hw, MEMWIN_CSIOSTOR); + + rv = csio_hw_get_fw_version(hw, &hw->fwrev); + if (rv != 0) + goto out; + + csio_hw_print_fw_version(hw, "Firmware revision"); + + rv = csio_do_hello(hw, &hw->fw_state); + if (rv != 0) { + CSIO_INC_STATS(hw, n_err_fatal); + csio_post_event(&hw->sm, CSIO_HWE_FATAL); + goto out; + } + + /* Read vpd */ + rv = csio_hw_get_vpd_params(hw, &hw->vpd); + if (rv != 0) + goto out; + + csio_hw_get_fw_version(hw, &hw->fwrev); + csio_hw_get_tp_version(hw, &hw->tp_vers); + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + + /* Do firmware update */ + spin_unlock_irq(&hw->lock); + rv = csio_hw_flash_fw(hw, &reset); + spin_lock_irq(&hw->lock); + + if (rv != 0) + goto out; + + rv = csio_hw_check_fwver(hw); + if (rv < 0) + goto out; + + /* If the firmware doesn't support Configuration Files, + * return an error. + */ + rv = csio_hw_check_fwconfig(hw, param); + if (rv != 0) { + csio_info(hw, "Firmware doesn't support " + "Firmware Configuration files\n"); + goto out; + } + + /* The firmware provides us with a memory buffer where we can + * load a Configuration File from the host if we want to + * override the Configuration File in flash. + */ + rv = csio_hw_use_fwconfig(hw, reset, param); + if (rv == -ENOENT) { + csio_info(hw, "Could not initialize " + "adapter, error%d\n", rv); + goto out; + } + if (rv != 0) { + csio_info(hw, "Could not initialize " + "adapter, error%d\n", rv); + goto out; + } + + } else { + rv = csio_hw_check_fwver(hw); + if (rv < 0) + goto out; + + if (hw->fw_state == CSIO_DEV_STATE_INIT) { + + hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; + + /* device parameters */ + rv = csio_get_device_params(hw); + if (rv != 0) + goto out; + + /* Get device capabilities */ + rv = csio_config_device_caps(hw); + if (rv != 0) + goto out; + + /* Configure SGE */ + csio_wr_sge_init(hw); + + /* Post event to notify completion of configuration */ + csio_post_event(&hw->sm, CSIO_HWE_INIT); + goto out; + } + } /* if not master */ + +out: + return; +} + +/* + * csio_hw_initialize - Initialize HW + * @hw - HW module + * + */ +static void +csio_hw_initialize(struct csio_hw *hw) +{ + struct csio_mb *mbp; + enum fw_retval retval; + int rv; + int i; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) + goto out; + + csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); + + if (csio_mb_issue(hw, mbp)) { + csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n"); + goto free_and_out; + } + + retval = csio_mb_fw_retval(mbp); + if (retval != FW_SUCCESS) { + csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n", + retval); + goto free_and_out; + } + + mempool_free(mbp, hw->mb_mempool); + } + + rv = csio_get_fcoe_resinfo(hw); + if (rv != 0) { + csio_err(hw, "Failed to read fcoe resource info: %d\n", rv); + goto out; + } + + spin_unlock_irq(&hw->lock); + rv = csio_config_queues(hw); + spin_lock_irq(&hw->lock); + + if (rv != 0) { + csio_err(hw, "Config of queues failed!: %d\n", rv); + goto out; + } + + for (i = 0; i < hw->num_pports; i++) + hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA; + + if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { + rv = csio_enable_ports(hw); + if (rv != 0) { + csio_err(hw, "Failed to enable ports: %d\n", rv); + goto out; + } + } + + csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE); + return; + +free_and_out: + mempool_free(mbp, hw->mb_mempool); +out: + return; +} + +#define PF_INTR_MASK (PFSW_F | PFCIM_F) + +/* + * csio_hw_intr_enable - Enable HW interrupts + * @hw: Pointer to HW module. + * + * Enable interrupts in HW registers. + */ +static void +csio_hw_intr_enable(struct csio_hw *hw) +{ + uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw)); + u32 pf = 0; + uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE_A); + + if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK)) + pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); + else + pf = T6_SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); + + /* + * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up + * by FW, so do nothing for INTX. + */ + if (hw->intr_mode == CSIO_IM_MSIX) + csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A), + AIVEC_V(AIVEC_M), vec); + else if (hw->intr_mode == CSIO_IM_MSI) + csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A), + AIVEC_V(AIVEC_M), 0); + + csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE_A)); + + /* Turn on MB interrupts - this will internally flush PIO as well */ + csio_mb_intr_enable(hw); + + /* These are common registers - only a master can modify them */ + if (csio_is_hw_master(hw)) { + /* + * Disable the Serial FLASH interrupt, if enabled! + */ + pl &= (~SF_F); + csio_wr_reg32(hw, pl, PL_INT_ENABLE_A); + + csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE_F | + EGRESS_SIZE_ERR_F | ERR_INVALID_CIDX_INC_F | + ERR_CPL_OPCODE_0_F | ERR_DROPPED_DB_F | + ERR_DATA_CPL_ON_HIGH_QID1_F | + ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F | + ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F | + ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F | + ERR_EGR_CTXT_PRIO_F | INGRESS_SIZE_ERR_F, + SGE_INT_ENABLE3_A); + csio_set_reg_field(hw, PL_INT_MAP0_A, 0, 1 << pf); + } + + hw->flags |= CSIO_HWF_HW_INTR_ENABLED; + +} + +/* + * csio_hw_intr_disable - Disable HW interrupts + * @hw: Pointer to HW module. + * + * Turn off Mailbox and PCI_PF_CFG interrupts. + */ +void +csio_hw_intr_disable(struct csio_hw *hw) +{ + u32 pf = 0; + + if (csio_is_t5(hw->pdev->device & CSIO_HW_CHIP_MASK)) + pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); + else + pf = T6_SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); + + if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED)) + return; + + hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED; + + csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE_A)); + if (csio_is_hw_master(hw)) + csio_set_reg_field(hw, PL_INT_MAP0_A, 1 << pf, 0); + + /* Turn off MB interrupts */ + csio_mb_intr_disable(hw); + +} + +void +csio_hw_fatal_err(struct csio_hw *hw) +{ + csio_set_reg_field(hw, SGE_CONTROL_A, GLOBALENABLE_F, 0); + csio_hw_intr_disable(hw); + + /* Do not reset HW, we may need FW state for debugging */ + csio_fatal(hw, "HW Fatal error encountered!\n"); +} + +/*****************************************************************************/ +/* START: HW SM */ +/*****************************************************************************/ +/* + * csio_hws_uninit - Uninit state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_CFG: + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_configuring - Configuring state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_INIT: + csio_set_state(&hw->sm, csio_hws_initializing); + csio_hw_initialize(hw); + break; + + case CSIO_HWE_INIT_DONE: + csio_set_state(&hw->sm, csio_hws_ready); + /* Fan out event to all lnode SMs */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_do_bye(hw); + break; + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_initializing - Initialiazing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_INIT_DONE: + csio_set_state(&hw->sm, csio_hws_ready); + + /* Fan out event to all lnode SMs */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); + + /* Enable interrupts */ + csio_hw_intr_enable(hw); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_do_bye(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_ready - Ready state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt) +{ + /* Remember the event */ + hw->evtflag = evt; + + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET: + case CSIO_HWE_FW_DLOAD: + case CSIO_HWE_SUSPEND: + case CSIO_HWE_PCI_REMOVE: + case CSIO_HWE_PCIERR_DETECTED: + csio_set_state(&hw->sm, csio_hws_quiescing); + /* cleanup all outstanding cmds */ + if (evt == CSIO_HWE_HBA_RESET || + evt == CSIO_HWE_PCIERR_DETECTED) + csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false); + else + csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true); + + csio_hw_intr_disable(hw); + csio_hw_mbm_cleanup(hw); + csio_evtq_stop(hw); + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP); + csio_evtq_flush(hw); + csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw)); + csio_post_event(&hw->sm, CSIO_HWE_QUIESCED); + break; + + case CSIO_HWE_FATAL: + csio_set_state(&hw->sm, csio_hws_uninit); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_quiescing - Quiescing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_QUIESCED: + switch (hw->evtflag) { + case CSIO_HWE_FW_DLOAD: + csio_set_state(&hw->sm, csio_hws_resetting); + /* Download firmware */ + /* Fall through */ + + case CSIO_HWE_HBA_RESET: + csio_set_state(&hw->sm, csio_hws_resetting); + /* Start reset of the HBA */ + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET); + csio_wr_destroy_queues(hw, false); + csio_do_reset(hw, false); + csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE); + break; + + case CSIO_HWE_PCI_REMOVE: + csio_set_state(&hw->sm, csio_hws_removing); + csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE); + csio_wr_destroy_queues(hw, true); + /* Now send the bye command */ + csio_do_bye(hw); + break; + + case CSIO_HWE_SUSPEND: + csio_set_state(&hw->sm, csio_hws_quiesced); + break; + + case CSIO_HWE_PCIERR_DETECTED: + csio_set_state(&hw->sm, csio_hws_pcierr); + csio_wr_destroy_queues(hw, false); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + + } + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_quiesced - Quiesced state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_RESUME: + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_resetting - HW Resetting state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET_DONE: + csio_evtq_start(hw); + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/* + * csio_hws_removing - PCI Hotplug removing state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_HBA_RESET: + if (!csio_is_hw_master(hw)) + break; + /* + * The BYE should have alerady been issued, so we cant + * use the mailbox interface. Hence we use the PL_RST + * register directly. + */ + csio_err(hw, "Resetting HW and waiting 2 seconds...\n"); + csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); + mdelay(2000); + break; + + /* Should never receive any new events */ + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + + } +} + +/* + * csio_hws_pcierr - PCI Error state + * @hw - HW module + * @evt - Event + * + */ +static void +csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt) +{ + hw->prev_evt = hw->cur_evt; + hw->cur_evt = evt; + CSIO_INC_STATS(hw, n_evt_sm[evt]); + + switch (evt) { + case CSIO_HWE_PCIERR_SLOT_RESET: + csio_evtq_start(hw); + csio_set_state(&hw->sm, csio_hws_configuring); + csio_hw_configure(hw); + break; + + default: + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +} + +/*****************************************************************************/ +/* END: HW SM */ +/*****************************************************************************/ + +/* + * csio_handle_intr_status - table driven interrupt handler + * @hw: HW instance + * @reg: the interrupt status register to process + * @acts: table of interrupt actions + * + * A table driven interrupt handler that applies a set of masks to an + * interrupt status word and performs the corresponding actions if the + * interrupts described by the mask have occured. The actions include + * optionally emitting a warning or alert message. The table is terminated + * by an entry specifying mask 0. Returns the number of fatal interrupt + * conditions. + */ +int +csio_handle_intr_status(struct csio_hw *hw, unsigned int reg, + const struct intr_info *acts) +{ + int fatal = 0; + unsigned int mask = 0; + unsigned int status = csio_rd_reg32(hw, reg); + + for ( ; acts->mask; ++acts) { + if (!(status & acts->mask)) + continue; + if (acts->fatal) { + fatal++; + csio_fatal(hw, "Fatal %s (0x%x)\n", + acts->msg, status & acts->mask); + } else if (acts->msg) + csio_info(hw, "%s (0x%x)\n", + acts->msg, status & acts->mask); + mask |= acts->mask; + } + status &= mask; + if (status) /* clear processed interrupts */ + csio_wr_reg32(hw, status, reg); + return fatal; +} + +/* + * TP interrupt handler. + */ +static void csio_tp_intr_handler(struct csio_hw *hw) +{ + static struct intr_info tp_intr_info[] = { + { 0x3fffffff, "TP parity error", -1, 1 }, + { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, TP_INT_CAUSE_A, tp_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * SGE interrupt handler. + */ +static void csio_sge_intr_handler(struct csio_hw *hw) +{ + uint64_t v; + + static struct intr_info sge_intr_info[] = { + { ERR_CPL_EXCEED_IQE_SIZE_F, + "SGE received CPL exceeding IQE size", -1, 1 }, + { ERR_INVALID_CIDX_INC_F, + "SGE GTS CIDX increment too large", -1, 0 }, + { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 }, + { ERR_DROPPED_DB_F, "SGE doorbell dropped", -1, 0 }, + { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F, + "SGE IQID > 1023 received CPL for FL", -1, 0 }, + { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1, + 0 }, + { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1, + 0 }, + { ERR_ING_CTXT_PRIO_F, + "SGE too many priority ingress contexts", -1, 0 }, + { ERR_EGR_CTXT_PRIO_F, + "SGE too many priority egress contexts", -1, 0 }, + { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 }, + { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 }, + { 0, NULL, 0, 0 } + }; + + v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1_A) | + ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2_A) << 32); + if (v) { + csio_fatal(hw, "SGE parity error (%#llx)\n", + (unsigned long long)v); + csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF), + SGE_INT_CAUSE1_A); + csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2_A); + } + + v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info); + + if (csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info) || + v != 0) + csio_hw_fatal_err(hw); +} + +#define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\ + OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F) +#define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\ + IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F) + +/* + * CIM interrupt handler. + */ +static void csio_cim_intr_handler(struct csio_hw *hw) +{ + static struct intr_info cim_intr_info[] = { + { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 }, + { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, + { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, + { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 }, + { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 }, + { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 }, + { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info cim_upintr_info[] = { + { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 }, + { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 }, + { ILLWRINT_F, "CIM illegal write", -1, 1 }, + { ILLRDINT_F, "CIM illegal read", -1, 1 }, + { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 }, + { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 }, + { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 }, + { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 }, + { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 }, + { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 }, + { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 }, + { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 }, + { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 }, + { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 }, + { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 }, + { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 }, + { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 }, + { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 }, + { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 }, + { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 }, + { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 }, + { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 }, + { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 }, + { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 }, + { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 }, + { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 }, + { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 }, + { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE_A, + cim_intr_info) + + csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE_A, + cim_upintr_info); + if (fat) + csio_hw_fatal_err(hw); +} + +/* + * ULP RX interrupt handler. + */ +static void csio_ulprx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ulprx_intr_info[] = { + { 0x1800000, "ULPRX context error", -1, 1 }, + { 0x7fffff, "ULPRX parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE_A, ulprx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * ULP TX interrupt handler. + */ +static void csio_ulptx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ulptx_intr_info[] = { + { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1, + 0 }, + { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1, + 0 }, + { 0xfffffff, "ULPTX parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE_A, ulptx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * PM TX interrupt handler. + */ +static void csio_pmtx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pmtx_intr_info[] = { + { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 }, + { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 }, + { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 }, + { 0xffffff0, "PMTX framing error", -1, 1 }, + { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error", -1, + 1 }, + { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 }, + { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1}, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE_A, pmtx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * PM RX interrupt handler. + */ +static void csio_pmrx_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pmrx_intr_info[] = { + { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 }, + { 0x3ffff0, "PMRX framing error", -1, 1 }, + { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 }, + { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error", -1, + 1 }, + { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 }, + { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1}, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE_A, pmrx_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * CPL switch interrupt handler. + */ +static void csio_cplsw_intr_handler(struct csio_hw *hw) +{ + static struct intr_info cplsw_intr_info[] = { + { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 }, + { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 }, + { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 }, + { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 }, + { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 }, + { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, CPL_INTR_CAUSE_A, cplsw_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * LE interrupt handler. + */ +static void csio_le_intr_handler(struct csio_hw *hw) +{ + enum chip_type chip = CHELSIO_CHIP_VERSION(hw->chip_id); + + static struct intr_info le_intr_info[] = { + { LIPMISS_F, "LE LIP miss", -1, 0 }, + { LIP0_F, "LE 0 LIP error", -1, 0 }, + { PARITYERR_F, "LE parity error", -1, 1 }, + { UNKNOWNCMD_F, "LE unknown command", -1, 1 }, + { REQQPARERR_F, "LE request queue parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + static struct intr_info t6_le_intr_info[] = { + { T6_LIPMISS_F, "LE LIP miss", -1, 0 }, + { T6_LIP0_F, "LE 0 LIP error", -1, 0 }, + { TCAMINTPERR_F, "LE parity error", -1, 1 }, + { T6_UNKNOWNCMD_F, "LE unknown command", -1, 1 }, + { SSRAMINTPERR_F, "LE request queue parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE_A, + (chip == CHELSIO_T5) ? + le_intr_info : t6_le_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * MPS interrupt handler. + */ +static void csio_mps_intr_handler(struct csio_hw *hw) +{ + static struct intr_info mps_rx_intr_info[] = { + { 0xffffff, "MPS Rx parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_tx_intr_info[] = { + { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 }, + { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 }, + { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error", + -1, 1 }, + { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error", + -1, 1 }, + { BUBBLE_F, "MPS Tx underflow", -1, 1 }, + { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 }, + { FRMERR_F, "MPS Tx framing error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_trc_intr_info[] = { + { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 }, + { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error", + -1, 1 }, + { MISCPERR_F, "MPS TRC misc parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_sram_intr_info[] = { + { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_tx_intr_info[] = { + { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_stat_rx_intr_info[] = { + { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info mps_cls_intr_info[] = { + { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 }, + { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 }, + { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + int fat; + + fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE_A, + mps_rx_intr_info) + + csio_handle_intr_status(hw, MPS_TX_INT_CAUSE_A, + mps_tx_intr_info) + + csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE_A, + mps_trc_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM_A, + mps_stat_sram_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A, + mps_stat_tx_intr_info) + + csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A, + mps_stat_rx_intr_info) + + csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE_A, + mps_cls_intr_info); + + csio_wr_reg32(hw, 0, MPS_INT_CAUSE_A); + csio_rd_reg32(hw, MPS_INT_CAUSE_A); /* flush */ + if (fat) + csio_hw_fatal_err(hw); +} + +#define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \ + ECC_UE_INT_CAUSE_F) + +/* + * EDC/MC interrupt handler. + */ +static void csio_mem_intr_handler(struct csio_hw *hw, int idx) +{ + static const char name[3][5] = { "EDC0", "EDC1", "MC" }; + + unsigned int addr, cnt_addr, v; + + if (idx <= MEM_EDC1) { + addr = EDC_REG(EDC_INT_CAUSE_A, idx); + cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx); + } else { + addr = MC_INT_CAUSE_A; + cnt_addr = MC_ECC_STATUS_A; + } + + v = csio_rd_reg32(hw, addr) & MEM_INT_MASK; + if (v & PERR_INT_CAUSE_F) + csio_fatal(hw, "%s FIFO parity error\n", name[idx]); + if (v & ECC_CE_INT_CAUSE_F) { + uint32_t cnt = ECC_CECNT_G(csio_rd_reg32(hw, cnt_addr)); + + csio_wr_reg32(hw, ECC_CECNT_V(ECC_CECNT_M), cnt_addr); + csio_warn(hw, "%u %s correctable ECC data error%s\n", + cnt, name[idx], cnt > 1 ? "s" : ""); + } + if (v & ECC_UE_INT_CAUSE_F) + csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]); + + csio_wr_reg32(hw, v, addr); + if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F)) + csio_hw_fatal_err(hw); +} + +/* + * MA interrupt handler. + */ +static void csio_ma_intr_handler(struct csio_hw *hw) +{ + uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE_A); + + if (status & MEM_PERR_INT_CAUSE_F) + csio_fatal(hw, "MA parity error, parity status %#x\n", + csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS_A)); + if (status & MEM_WRAP_INT_CAUSE_F) { + v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS_A); + csio_fatal(hw, + "MA address wrap-around error by client %u to address %#x\n", + MEM_WRAP_CLIENT_NUM_G(v), MEM_WRAP_ADDRESS_G(v) << 4); + } + csio_wr_reg32(hw, status, MA_INT_CAUSE_A); + csio_hw_fatal_err(hw); +} + +/* + * SMB interrupt handler. + */ +static void csio_smb_intr_handler(struct csio_hw *hw) +{ + static struct intr_info smb_intr_info[] = { + { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 }, + { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 }, + { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, SMB_INT_CAUSE_A, smb_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * NC-SI interrupt handler. + */ +static void csio_ncsi_intr_handler(struct csio_hw *hw) +{ + static struct intr_info ncsi_intr_info[] = { + { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 }, + { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 }, + { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 }, + { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, NCSI_INT_CAUSE_A, ncsi_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * XGMAC interrupt handler. + */ +static void csio_xgmac_intr_handler(struct csio_hw *hw, int port) +{ + uint32_t v = csio_rd_reg32(hw, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A)); + + v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F; + if (!v) + return; + + if (v & TXFIFO_PRTY_ERR_F) + csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port); + if (v & RXFIFO_PRTY_ERR_F) + csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port); + csio_wr_reg32(hw, v, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A)); + csio_hw_fatal_err(hw); +} + +/* + * PL interrupt handler. + */ +static void csio_pl_intr_handler(struct csio_hw *hw) +{ + static struct intr_info pl_intr_info[] = { + { FATALPERR_F, "T4 fatal parity error", -1, 1 }, + { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE_A, pl_intr_info)) + csio_hw_fatal_err(hw); +} + +/* + * csio_hw_slow_intr_handler - control path interrupt handler + * @hw: HW module + * + * Interrupt handler for non-data global interrupt events, e.g., errors. + * The designation 'slow' is because it involves register reads, while + * data interrupts typically don't involve any MMIOs. + */ +int +csio_hw_slow_intr_handler(struct csio_hw *hw) +{ + uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE_A); + + if (!(cause & CSIO_GLBL_INTR_MASK)) { + CSIO_INC_STATS(hw, n_plint_unexp); + return 0; + } + + csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause); + + CSIO_INC_STATS(hw, n_plint_cnt); + + if (cause & CIM_F) + csio_cim_intr_handler(hw); + + if (cause & MPS_F) + csio_mps_intr_handler(hw); + + if (cause & NCSI_F) + csio_ncsi_intr_handler(hw); + + if (cause & PL_F) + csio_pl_intr_handler(hw); + + if (cause & SMB_F) + csio_smb_intr_handler(hw); + + if (cause & XGMAC0_F) + csio_xgmac_intr_handler(hw, 0); + + if (cause & XGMAC1_F) + csio_xgmac_intr_handler(hw, 1); + + if (cause & XGMAC_KR0_F) + csio_xgmac_intr_handler(hw, 2); + + if (cause & XGMAC_KR1_F) + csio_xgmac_intr_handler(hw, 3); + + if (cause & PCIE_F) + hw->chip_ops->chip_pcie_intr_handler(hw); + + if (cause & MC_F) + csio_mem_intr_handler(hw, MEM_MC); + + if (cause & EDC0_F) + csio_mem_intr_handler(hw, MEM_EDC0); + + if (cause & EDC1_F) + csio_mem_intr_handler(hw, MEM_EDC1); + + if (cause & LE_F) + csio_le_intr_handler(hw); + + if (cause & TP_F) + csio_tp_intr_handler(hw); + + if (cause & MA_F) + csio_ma_intr_handler(hw); + + if (cause & PM_TX_F) + csio_pmtx_intr_handler(hw); + + if (cause & PM_RX_F) + csio_pmrx_intr_handler(hw); + + if (cause & ULP_RX_F) + csio_ulprx_intr_handler(hw); + + if (cause & CPL_SWITCH_F) + csio_cplsw_intr_handler(hw); + + if (cause & SGE_F) + csio_sge_intr_handler(hw); + + if (cause & ULP_TX_F) + csio_ulptx_intr_handler(hw); + + /* Clear the interrupts just processed for which we are the master. */ + csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE_A); + csio_rd_reg32(hw, PL_INT_CAUSE_A); /* flush */ + + return 1; +} + +/***************************************************************************** + * HW <--> mailbox interfacing routines. + ****************************************************************************/ +/* + * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions + * + * @data: Private data pointer. + * + * Called from worker thread context. + */ +static void +csio_mberr_worker(void *data) +{ + struct csio_hw *hw = (struct csio_hw *)data; + struct csio_mbm *mbm = &hw->mbm; + LIST_HEAD(cbfn_q); + struct csio_mb *mbp_next; + int rv; + + del_timer_sync(&mbm->timer); + + spin_lock_irq(&hw->lock); + if (list_empty(&mbm->cbfn_q)) { + spin_unlock_irq(&hw->lock); + return; + } + + list_splice_tail_init(&mbm->cbfn_q, &cbfn_q); + mbm->stats.n_cbfnq = 0; + + /* Try to start waiting mailboxes */ + if (!list_empty(&mbm->req_q)) { + mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list); + list_del_init(&mbp_next->list); + + rv = csio_mb_issue(hw, mbp_next); + if (rv != 0) + list_add_tail(&mbp_next->list, &mbm->req_q); + else + CSIO_DEC_STATS(mbm, n_activeq); + } + spin_unlock_irq(&hw->lock); + + /* Now callback completions */ + csio_mb_completions(hw, &cbfn_q); +} + +/* + * csio_hw_mb_timer - Top-level Mailbox timeout handler. + * + * @data: private data pointer + * + **/ +static void +csio_hw_mb_timer(struct timer_list *t) +{ + struct csio_mbm *mbm = from_timer(mbm, t, timer); + struct csio_hw *hw = mbm->hw; + struct csio_mb *mbp = NULL; + + spin_lock_irq(&hw->lock); + mbp = csio_mb_tmo_handler(hw); + spin_unlock_irq(&hw->lock); + + /* Call back the function for the timed-out Mailbox */ + if (mbp) + mbp->mb_cbfn(hw, mbp); + +} + +/* + * csio_hw_mbm_cleanup - Cleanup Mailbox module. + * @hw: HW module + * + * Called with lock held, should exit with lock held. + * Cancels outstanding mailboxes (waiting, in-flight) and gathers them + * into a local queue. Drops lock and calls the completions. Holds + * lock and returns. + */ +static void +csio_hw_mbm_cleanup(struct csio_hw *hw) +{ + LIST_HEAD(cbfn_q); + + csio_mb_cancel_all(hw, &cbfn_q); + + spin_unlock_irq(&hw->lock); + csio_mb_completions(hw, &cbfn_q); + spin_lock_irq(&hw->lock); +} + +/***************************************************************************** + * Event handling + ****************************************************************************/ +int +csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg, + uint16_t len) +{ + struct csio_evt_msg *evt_entry = NULL; + + if (type >= CSIO_EVT_MAX) + return -EINVAL; + + if (len > CSIO_EVT_MSG_SIZE) + return -EINVAL; + + if (hw->flags & CSIO_HWF_FWEVT_STOP) + return -EINVAL; + + if (list_empty(&hw->evt_free_q)) { + csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", + type, len); + return -ENOMEM; + } + + evt_entry = list_first_entry(&hw->evt_free_q, + struct csio_evt_msg, list); + list_del_init(&evt_entry->list); + + /* copy event msg and queue the event */ + evt_entry->type = type; + memcpy((void *)evt_entry->data, evt_msg, len); + list_add_tail(&evt_entry->list, &hw->evt_active_q); + + CSIO_DEC_STATS(hw, n_evt_freeq); + CSIO_INC_STATS(hw, n_evt_activeq); + + return 0; +} + +static int +csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg, + uint16_t len, bool msg_sg) +{ + struct csio_evt_msg *evt_entry = NULL; + struct csio_fl_dma_buf *fl_sg; + uint32_t off = 0; + unsigned long flags; + int n, ret = 0; + + if (type >= CSIO_EVT_MAX) + return -EINVAL; + + if (len > CSIO_EVT_MSG_SIZE) + return -EINVAL; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->flags & CSIO_HWF_FWEVT_STOP) { + ret = -EINVAL; + goto out; + } + + if (list_empty(&hw->evt_free_q)) { + csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", + type, len); + ret = -ENOMEM; + goto out; + } + + evt_entry = list_first_entry(&hw->evt_free_q, + struct csio_evt_msg, list); + list_del_init(&evt_entry->list); + + /* copy event msg and queue the event */ + evt_entry->type = type; + + /* If Payload in SG list*/ + if (msg_sg) { + fl_sg = (struct csio_fl_dma_buf *) evt_msg; + for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) { + memcpy((void *)((uintptr_t)evt_entry->data + off), + fl_sg->flbufs[n].vaddr, + fl_sg->flbufs[n].len); + off += fl_sg->flbufs[n].len; + } + } else + memcpy((void *)evt_entry->data, evt_msg, len); + + list_add_tail(&evt_entry->list, &hw->evt_active_q); + CSIO_DEC_STATS(hw, n_evt_freeq); + CSIO_INC_STATS(hw, n_evt_activeq); +out: + spin_unlock_irqrestore(&hw->lock, flags); + return ret; +} + +static void +csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry) +{ + if (evt_entry) { + spin_lock_irq(&hw->lock); + list_del_init(&evt_entry->list); + list_add_tail(&evt_entry->list, &hw->evt_free_q); + CSIO_DEC_STATS(hw, n_evt_activeq); + CSIO_INC_STATS(hw, n_evt_freeq); + spin_unlock_irq(&hw->lock); + } +} + +void +csio_evtq_flush(struct csio_hw *hw) +{ + uint32_t count; + count = 30; + while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) { + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING)); +} + +static void +csio_evtq_stop(struct csio_hw *hw) +{ + hw->flags |= CSIO_HWF_FWEVT_STOP; +} + +static void +csio_evtq_start(struct csio_hw *hw) +{ + hw->flags &= ~CSIO_HWF_FWEVT_STOP; +} + +static void +csio_evtq_cleanup(struct csio_hw *hw) +{ + struct list_head *evt_entry, *next_entry; + + /* Release outstanding events from activeq to freeq*/ + if (!list_empty(&hw->evt_active_q)) + list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q); + + hw->stats.n_evt_activeq = 0; + hw->flags &= ~CSIO_HWF_FWEVT_PENDING; + + /* Freeup event entry */ + list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) { + kfree(evt_entry); + CSIO_DEC_STATS(hw, n_evt_freeq); + } + + hw->stats.n_evt_freeq = 0; +} + + +static void +csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv) +{ + __u8 op; + void *msg = NULL; + uint32_t msg_len = 0; + bool msg_sg = 0; + + op = ((struct rss_header *) wr)->opcode; + if (op == CPL_FW6_PLD) { + CSIO_INC_STATS(hw, n_cpl_fw6_pld); + if (!flb || !flb->totlen) { + CSIO_INC_STATS(hw, n_cpl_unexp); + return; + } + + msg = (void *) flb; + msg_len = flb->totlen; + msg_sg = 1; + } else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) { + + CSIO_INC_STATS(hw, n_cpl_fw6_msg); + /* skip RSS header */ + msg = (void *)((uintptr_t)wr + sizeof(__be64)); + msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) : + sizeof(struct cpl_fw4_msg); + } else { + csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op); + CSIO_INC_STATS(hw, n_cpl_unexp); + return; + } + + /* + * Enqueue event to EventQ. Events processing happens + * in Event worker thread context + */ + if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg, + (uint16_t)msg_len, msg_sg)) + CSIO_INC_STATS(hw, n_evt_drop); +} + +void +csio_evtq_worker(struct work_struct *work) +{ + struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work); + struct list_head *evt_entry, *next_entry; + LIST_HEAD(evt_q); + struct csio_evt_msg *evt_msg; + struct cpl_fw6_msg *msg; + struct csio_rnode *rn; + int rv = 0; + uint8_t evtq_stop = 0; + + csio_dbg(hw, "event worker thread active evts#%d\n", + hw->stats.n_evt_activeq); + + spin_lock_irq(&hw->lock); + while (!list_empty(&hw->evt_active_q)) { + list_splice_tail_init(&hw->evt_active_q, &evt_q); + spin_unlock_irq(&hw->lock); + + list_for_each_safe(evt_entry, next_entry, &evt_q) { + evt_msg = (struct csio_evt_msg *) evt_entry; + + /* Drop events if queue is STOPPED */ + spin_lock_irq(&hw->lock); + if (hw->flags & CSIO_HWF_FWEVT_STOP) + evtq_stop = 1; + spin_unlock_irq(&hw->lock); + if (evtq_stop) { + CSIO_INC_STATS(hw, n_evt_drop); + goto free_evt; + } + + switch (evt_msg->type) { + case CSIO_EVT_FW: + msg = (struct cpl_fw6_msg *)(evt_msg->data); + + if ((msg->opcode == CPL_FW6_MSG || + msg->opcode == CPL_FW4_MSG) && + !msg->type) { + rv = csio_mb_fwevt_handler(hw, + msg->data); + if (!rv) + break; + /* Handle any remaining fw events */ + csio_fcoe_fwevt_handler(hw, + msg->opcode, msg->data); + } else if (msg->opcode == CPL_FW6_PLD) { + + csio_fcoe_fwevt_handler(hw, + msg->opcode, msg->data); + } else { + csio_warn(hw, + "Unhandled FW msg op %x type %x\n", + msg->opcode, msg->type); + CSIO_INC_STATS(hw, n_evt_drop); + } + break; + + case CSIO_EVT_MBX: + csio_mberr_worker(hw); + break; + + case CSIO_EVT_DEV_LOSS: + memcpy(&rn, evt_msg->data, sizeof(rn)); + csio_rnode_devloss_handler(rn); + break; + + default: + csio_warn(hw, "Unhandled event %x on evtq\n", + evt_msg->type); + CSIO_INC_STATS(hw, n_evt_unexp); + break; + } +free_evt: + csio_free_evt(hw, evt_msg); + } + + spin_lock_irq(&hw->lock); + } + hw->flags &= ~CSIO_HWF_FWEVT_PENDING; + spin_unlock_irq(&hw->lock); +} + +int +csio_fwevtq_handler(struct csio_hw *hw) +{ + int rv; + + if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) { + CSIO_INC_STATS(hw, n_int_stray); + return -EINVAL; + } + + rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx, + csio_process_fwevtq_entry, NULL); + return rv; +} + +/**************************************************************************** + * Entry points + ****************************************************************************/ + +/* Management module */ +/* + * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q. + * mgmt - mgmt module + * @io_req - io request + * + * Return - 0:if given IO Req exists in active Q. + * -EINVAL :if lookup fails. + */ +int +csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req) +{ + struct list_head *tmp; + + /* Lookup ioreq in the ACTIVEQ */ + list_for_each(tmp, &mgmtm->active_q) { + if (io_req == (struct csio_ioreq *)tmp) + return 0; + } + return -EINVAL; +} + +#define ECM_MIN_TMO 1000 /* Minimum timeout value for req */ + +/* + * csio_mgmts_tmo_handler - MGMT IO Timeout handler. + * @data - Event data. + * + * Return - none. + */ +static void +csio_mgmt_tmo_handler(struct timer_list *t) +{ + struct csio_mgmtm *mgmtm = from_timer(mgmtm, t, mgmt_timer); + struct list_head *tmp; + struct csio_ioreq *io_req; + + csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n"); + + spin_lock_irq(&mgmtm->hw->lock); + + list_for_each(tmp, &mgmtm->active_q) { + io_req = (struct csio_ioreq *) tmp; + io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO); + + if (!io_req->tmo) { + /* Dequeue the request from retry Q. */ + tmp = csio_list_prev(tmp); + list_del_init(&io_req->sm.sm_list); + if (io_req->io_cbfn) { + /* io_req will be freed by completion handler */ + io_req->wr_status = -ETIMEDOUT; + io_req->io_cbfn(mgmtm->hw, io_req); + } else { + CSIO_DB_ASSERT(0); + } + } + } + + /* If retry queue is not empty, re-arm timer */ + if (!list_empty(&mgmtm->active_q)) + mod_timer(&mgmtm->mgmt_timer, + jiffies + msecs_to_jiffies(ECM_MIN_TMO)); + spin_unlock_irq(&mgmtm->hw->lock); +} + +static void +csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm) +{ + struct csio_hw *hw = mgmtm->hw; + struct csio_ioreq *io_req; + struct list_head *tmp; + uint32_t count; + + count = 30; + /* Wait for all outstanding req to complete gracefully */ + while ((!list_empty(&mgmtm->active_q)) && count--) { + spin_unlock_irq(&hw->lock); + msleep(2000); + spin_lock_irq(&hw->lock); + } + + /* release outstanding req from ACTIVEQ */ + list_for_each(tmp, &mgmtm->active_q) { + io_req = (struct csio_ioreq *) tmp; + tmp = csio_list_prev(tmp); + list_del_init(&io_req->sm.sm_list); + mgmtm->stats.n_active--; + if (io_req->io_cbfn) { + /* io_req will be freed by completion handler */ + io_req->wr_status = -ETIMEDOUT; + io_req->io_cbfn(mgmtm->hw, io_req); + } + } +} + +/* + * csio_mgmt_init - Mgmt module init entry point + * @mgmtsm - mgmt module + * @hw - HW module + * + * Initialize mgmt timer, resource wait queue, active queue, + * completion q. Allocate Egress and Ingress + * WR queues and save off the queue index returned by the WR + * module for future use. Allocate and save off mgmt reqs in the + * mgmt_req_freelist for future use. Make sure their SM is initialized + * to uninit state. + * Returns: 0 - on success + * -ENOMEM - on error. + */ +static int +csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw) +{ + timer_setup(&mgmtm->mgmt_timer, csio_mgmt_tmo_handler, 0); + + INIT_LIST_HEAD(&mgmtm->active_q); + INIT_LIST_HEAD(&mgmtm->cbfn_q); + + mgmtm->hw = hw; + /*mgmtm->iq_idx = hw->fwevt_iq_idx;*/ + + return 0; +} + +/* + * csio_mgmtm_exit - MGMT module exit entry point + * @mgmtsm - mgmt module + * + * This function called during MGMT module uninit. + * Stop timers, free ioreqs allocated. + * Returns: None + * + */ +static void +csio_mgmtm_exit(struct csio_mgmtm *mgmtm) +{ + del_timer_sync(&mgmtm->mgmt_timer); +} + + +/** + * csio_hw_start - Kicks off the HW State machine + * @hw: Pointer to HW module. + * + * It is assumed that the initialization is a synchronous operation. + * So when we return afer posting the event, the HW SM should be in + * the ready state, if there were no errors during init. + */ +int +csio_hw_start(struct csio_hw *hw) +{ + spin_lock_irq(&hw->lock); + csio_post_event(&hw->sm, CSIO_HWE_CFG); + spin_unlock_irq(&hw->lock); + + if (csio_is_hw_ready(hw)) + return 0; + else if (csio_match_state(hw, csio_hws_uninit)) + return -EINVAL; + else + return -ENODEV; +} + +int +csio_hw_stop(struct csio_hw *hw) +{ + csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE); + + if (csio_is_hw_removing(hw)) + return 0; + else + return -EINVAL; +} + +/* Max reset retries */ +#define CSIO_MAX_RESET_RETRIES 3 + +/** + * csio_hw_reset - Reset the hardware + * @hw: HW module. + * + * Caller should hold lock across this function. + */ +int +csio_hw_reset(struct csio_hw *hw) +{ + if (!csio_is_hw_master(hw)) + return -EPERM; + + if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) { + csio_dbg(hw, "Max hw reset attempts reached.."); + return -EINVAL; + } + + hw->rst_retries++; + csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET); + + if (csio_is_hw_ready(hw)) { + hw->rst_retries = 0; + hw->stats.n_reset_start = jiffies_to_msecs(jiffies); + return 0; + } else + return -EINVAL; +} + +/* + * csio_hw_get_device_id - Caches the Adapter's vendor & device id. + * @hw: HW module. + */ +static void +csio_hw_get_device_id(struct csio_hw *hw) +{ + /* Is the adapter device id cached already ?*/ + if (csio_is_dev_id_cached(hw)) + return; + + /* Get the PCI vendor & device id */ + pci_read_config_word(hw->pdev, PCI_VENDOR_ID, + &hw->params.pci.vendor_id); + pci_read_config_word(hw->pdev, PCI_DEVICE_ID, + &hw->params.pci.device_id); + + csio_dev_id_cached(hw); + hw->chip_id = (hw->params.pci.device_id & CSIO_HW_CHIP_MASK); + +} /* csio_hw_get_device_id */ + +/* + * csio_hw_set_description - Set the model, description of the hw. + * @hw: HW module. + * @ven_id: PCI Vendor ID + * @dev_id: PCI Device ID + */ +static void +csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id) +{ + uint32_t adap_type, prot_type; + + if (ven_id == CSIO_VENDOR_ID) { + prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK); + adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK); + + if (prot_type == CSIO_T5_FCOE_ASIC) { + memcpy(hw->hw_ver, + csio_t5_fcoe_adapters[adap_type].model_no, 16); + memcpy(hw->model_desc, + csio_t5_fcoe_adapters[adap_type].description, + 32); + } else { + char tempName[32] = "Chelsio FCoE Controller"; + memcpy(hw->model_desc, tempName, 32); + } + } +} /* csio_hw_set_description */ + +/** + * csio_hw_init - Initialize HW module. + * @hw: Pointer to HW module. + * + * Initialize the members of the HW module. + */ +int +csio_hw_init(struct csio_hw *hw) +{ + int rv = -EINVAL; + uint32_t i; + uint16_t ven_id, dev_id; + struct csio_evt_msg *evt_entry; + + INIT_LIST_HEAD(&hw->sm.sm_list); + csio_init_state(&hw->sm, csio_hws_uninit); + spin_lock_init(&hw->lock); + INIT_LIST_HEAD(&hw->sln_head); + + /* Get the PCI vendor & device id */ + csio_hw_get_device_id(hw); + + strcpy(hw->name, CSIO_HW_NAME); + + /* Initialize the HW chip ops T5 specific ops */ + hw->chip_ops = &t5_ops; + + /* Set the model & its description */ + + ven_id = hw->params.pci.vendor_id; + dev_id = hw->params.pci.device_id; + + csio_hw_set_description(hw, ven_id, dev_id); + + /* Initialize default log level */ + hw->params.log_level = (uint32_t) csio_dbg_level; + + csio_set_fwevt_intr_idx(hw, -1); + csio_set_nondata_intr_idx(hw, -1); + + /* Init all the modules: Mailbox, WorkRequest and Transport */ + if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer)) + goto err; + + rv = csio_wrm_init(csio_hw_to_wrm(hw), hw); + if (rv) + goto err_mbm_exit; + + rv = csio_scsim_init(csio_hw_to_scsim(hw), hw); + if (rv) + goto err_wrm_exit; + + rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw); + if (rv) + goto err_scsim_exit; + /* Pre-allocate evtq and initialize them */ + INIT_LIST_HEAD(&hw->evt_active_q); + INIT_LIST_HEAD(&hw->evt_free_q); + for (i = 0; i < csio_evtq_sz; i++) { + + evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL); + if (!evt_entry) { + rv = -ENOMEM; + csio_err(hw, "Failed to initialize eventq"); + goto err_evtq_cleanup; + } + + list_add_tail(&evt_entry->list, &hw->evt_free_q); + CSIO_INC_STATS(hw, n_evt_freeq); + } + + hw->dev_num = dev_num; + dev_num++; + + return 0; + +err_evtq_cleanup: + csio_evtq_cleanup(hw); + csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); +err_scsim_exit: + csio_scsim_exit(csio_hw_to_scsim(hw)); +err_wrm_exit: + csio_wrm_exit(csio_hw_to_wrm(hw), hw); +err_mbm_exit: + csio_mbm_exit(csio_hw_to_mbm(hw)); +err: + return rv; +} + +/** + * csio_hw_exit - Un-initialize HW module. + * @hw: Pointer to HW module. + * + */ +void +csio_hw_exit(struct csio_hw *hw) +{ + csio_evtq_cleanup(hw); + csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); + csio_scsim_exit(csio_hw_to_scsim(hw)); + csio_wrm_exit(csio_hw_to_wrm(hw), hw); + csio_mbm_exit(csio_hw_to_mbm(hw)); +} |