diff options
Diffstat (limited to 'drivers/scsi/isci/remote_device.h')
| -rw-r--r-- | drivers/scsi/isci/remote_device.h | 387 |
1 files changed, 387 insertions, 0 deletions
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h new file mode 100644 index 000000000..47a013fff --- /dev/null +++ b/drivers/scsi/isci/remote_device.h @@ -0,0 +1,387 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_REMOTE_DEVICE_H_ +#define _ISCI_REMOTE_DEVICE_H_ +#include <scsi/libsas.h> +#include <linux/kref.h> +#include "scu_remote_node_context.h" +#include "remote_node_context.h" +#include "port.h" + +enum sci_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX +}; + +/** + * isci_remote_device - isci representation of a sas expander / end point + * @device_port_width: hw setting for number of simultaneous connections + * @connection_rate: per-taskcontext connection rate for this device + * @working_request: SATA requests have no tag we for unaccelerated + * protocols we need a method to associate unsolicited + * frames with a pending request + */ +struct isci_remote_device { + #define IDEV_START_PENDING 0 + #define IDEV_STOP_PENDING 1 + #define IDEV_ALLOCATED 2 + #define IDEV_GONE 3 + #define IDEV_IO_READY 4 + #define IDEV_IO_NCQERROR 5 + #define IDEV_RNC_LLHANG_ENABLED 6 + #define IDEV_ABORT_PATH_ACTIVE 7 + #define IDEV_ABORT_PATH_RESUME_PENDING 8 + unsigned long flags; + struct kref kref; + struct isci_port *isci_port; + struct domain_device *domain_dev; + struct list_head node; + struct sci_base_state_machine sm; + u32 device_port_width; + enum sas_linkrate connection_rate; + struct isci_port *owning_port; + struct sci_remote_node_context rnc; + /* XXX unify with device reference counting and delete */ + u32 started_request_count; + struct isci_request *working_request; + u32 not_ready_reason; + scics_sds_remote_node_context_callback abort_resume_cb; + void *abort_resume_cbparam; +}; + +#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 + +/* device reference routines must be called under sci_lock */ +static inline struct isci_remote_device *isci_get_device( + struct isci_remote_device *idev) +{ + if (idev) + kref_get(&idev->kref); + return idev; +} + +static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev) +{ + struct isci_remote_device *idev = dev->lldd_dev; + + if (idev && !test_bit(IDEV_GONE, &idev->flags)) { + kref_get(&idev->kref); + return idev; + } + + return NULL; +} + +void isci_remote_device_release(struct kref *kref); +static inline void isci_put_device(struct isci_remote_device *idev) +{ + if (idev) + kref_put(&idev->kref, isci_remote_device_release); +} + +enum sci_status isci_remote_device_stop(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_nuke_requests(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_gone(struct domain_device *domain_dev); +int isci_remote_device_found(struct domain_device *domain_dev); + +/** + * sci_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status sci_remote_device_stop( + struct isci_remote_device *idev, + u32 timeout); + +/** + * sci_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status sci_remote_device_reset( + struct isci_remote_device *idev); + +/** + * sci_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status sci_remote_device_reset_complete( + struct isci_remote_device *idev); + +/** + * enum sci_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * @SCI_DEV_INITIAL: Simply the initial state for the base remote device + * state machine. + * + * @SCI_DEV_STOPPED: This state indicates that the remote device has + * successfully been stopped. In this state no new IO operations are + * permitted. This state is entered from the INITIAL state. This state + * is entered from the STOPPING state. + * + * @SCI_DEV_STARTING: This state indicates the the remote device is in + * the process of becoming ready (i.e. starting). In this state no new + * IO operations are permitted. This state is entered from the STOPPED + * state. + * + * @SCI_DEV_READY: This state indicates the remote device is now ready. + * Thus, the user is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + * + * @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote + * device. When there are no active IO for the device it is is in this + * state. + * + * @SCI_STP_DEV_CMD: This is the command state for for the STP remote + * device. This state is entered when the device is processing a + * non-NCQ command. The device object will fail any new start IO + * requests until this command is complete. + * + * @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device. + * This state is entered when the device is processing an NCQ reuqest. + * It will remain in this state so long as there is one or more NCQ + * requests being processed. + * + * @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP + * remote device. This state is entered when an SDB error FIS is + * received by the device object while in the NCQ state. The device + * object will only accept a READ LOG command while in this state. + * + * @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP + * ATAPI remote device. This state is entered when ATAPI device sends + * error status FIS without data while the device object is in CMD + * state. A suspension event is expected in this state. The device + * object will resume right away. + * + * @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the + * device is waiting for the RESET task coming to be recovered from + * certain hardware specific error. + * + * @SCI_SMP_DEV_IDLE: This is the ready operational substate for the + * remote device. This is the normal operational state for a remote + * device. + * + * @SCI_SMP_DEV_CMD: This is the suspended state for the remote device. + * This is the state that the device is placed in when a RNC suspend is + * received by the SCU hardware. + * + * @SCI_DEV_STOPPING: This state indicates that the remote device is in + * the process of stopping. In this state no new IO operations are + * permitted, but existing IO operations are allowed to complete. This + * state is entered from the READY state. This state is entered from + * the FAILED state. + * + * @SCI_DEV_FAILED: This state indicates that the remote device has + * failed. In this state no new IO operations are permitted. This + * state is entered from the INITIALIZING state. This state is entered + * from the READY state. + * + * @SCI_DEV_RESETTING: This state indicates the device is being reset. + * In this state no new IO operations are permitted. This state is + * entered from the READY state. + * + * @SCI_DEV_FINAL: Simply the final state for the base remote device + * state machine. + */ +#define REMOTE_DEV_STATES {\ + C(DEV_INITIAL),\ + C(DEV_STOPPED),\ + C(DEV_STARTING),\ + C(DEV_READY),\ + C(STP_DEV_IDLE),\ + C(STP_DEV_CMD),\ + C(STP_DEV_NCQ),\ + C(STP_DEV_NCQ_ERROR),\ + C(STP_DEV_ATAPI_ERROR),\ + C(STP_DEV_AWAIT_RESET),\ + C(SMP_DEV_IDLE),\ + C(SMP_DEV_CMD),\ + C(DEV_STOPPING),\ + C(DEV_FAILED),\ + C(DEV_RESETTING),\ + C(DEV_FINAL),\ + } +#undef C +#define C(a) SCI_##a +enum sci_remote_device_states REMOTE_DEV_STATES; +#undef C +const char *dev_state_name(enum sci_remote_device_states state); + +static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) +{ + struct isci_remote_device *idev; + + idev = container_of(rnc, typeof(*idev), rnc); + + return idev; +} + +static inline bool dev_is_expander(struct domain_device *dev) +{ + return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE; +} + +static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) +{ + /* XXX delete this voodoo when converting to the top-level device + * reference count + */ + if (WARN_ONCE(idev->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + idev->started_request_count--; +} + +void isci_dev_set_hang_detection_timeout(struct isci_remote_device *idev, u32 timeout); + +enum sci_status sci_remote_device_frame_handler( + struct isci_remote_device *idev, + u32 frame_index); + +enum sci_status sci_remote_device_event_handler( + struct isci_remote_device *idev, + u32 event_code); + +enum sci_status sci_remote_device_start_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_start_task( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_complete_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +void sci_remote_device_post_request( + struct isci_remote_device *idev, + u32 request); + +enum sci_status sci_remote_device_terminate_requests( + struct isci_remote_device *idev); + +int isci_remote_device_is_safe_to_abort( + struct isci_remote_device *idev); + +enum sci_status +sci_remote_device_abort_requests_pending_abort( + struct isci_remote_device *idev); + +enum sci_status isci_remote_device_suspend( + struct isci_host *ihost, + struct isci_remote_device *idev); + +enum sci_status sci_remote_device_resume( + struct isci_remote_device *idev, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); + +enum sci_status isci_remote_device_resume_from_abort( + struct isci_host *ihost, + struct isci_remote_device *idev); + +enum sci_status isci_remote_device_reset( + struct isci_host *ihost, + struct isci_remote_device *idev); + +enum sci_status isci_remote_device_reset_complete( + struct isci_host *ihost, + struct isci_remote_device *idev); + +enum sci_status isci_remote_device_suspend_terminate( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status isci_remote_device_terminate_requests( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); +enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev, + enum sci_remote_node_suspension_reasons reason); +#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ |