diff options
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_mbox.h')
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h new file mode 100644 index 000000000..c1d86d961 --- /dev/null +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -0,0 +1,238 @@ +/* + * + * Linux MegaRAID device driver + * + * Copyright (c) 2003-2004 LSI Logic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * FILE : megaraid_mbox.h + */ + +#ifndef _MEGARAID_H_ +#define _MEGARAID_H_ + + +#include "mega_common.h" +#include "mbox_defs.h" +#include "megaraid_ioctl.h" + + +#define MEGARAID_VERSION "2.20.5.1" +#define MEGARAID_EXT_VERSION "(Release Date: Thu Nov 16 15:32:35 EST 2006)" + + +/* + * Define some PCI values here until they are put in the kernel + */ +#define PCI_DEVICE_ID_PERC4_DI_DISCOVERY 0x000E +#define PCI_SUBSYS_ID_PERC4_DI_DISCOVERY 0x0123 + +#define PCI_DEVICE_ID_PERC4_SC 0x1960 +#define PCI_SUBSYS_ID_PERC4_SC 0x0520 + +#define PCI_DEVICE_ID_PERC4_DC 0x1960 +#define PCI_SUBSYS_ID_PERC4_DC 0x0518 + +#define PCI_DEVICE_ID_VERDE 0x0407 + +#define PCI_DEVICE_ID_PERC4_DI_EVERGLADES 0x000F +#define PCI_SUBSYS_ID_PERC4_DI_EVERGLADES 0x014A + +#define PCI_DEVICE_ID_PERC4E_SI_BIGBEND 0x0013 +#define PCI_SUBSYS_ID_PERC4E_SI_BIGBEND 0x016c + +#define PCI_DEVICE_ID_PERC4E_DI_KOBUK 0x0013 +#define PCI_SUBSYS_ID_PERC4E_DI_KOBUK 0x016d + +#define PCI_DEVICE_ID_PERC4E_DI_CORVETTE 0x0013 +#define PCI_SUBSYS_ID_PERC4E_DI_CORVETTE 0x016e + +#define PCI_DEVICE_ID_PERC4E_DI_EXPEDITION 0x0013 +#define PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION 0x016f + +#define PCI_DEVICE_ID_PERC4E_DI_GUADALUPE 0x0013 +#define PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE 0x0170 + +#define PCI_DEVICE_ID_DOBSON 0x0408 + +#define PCI_DEVICE_ID_MEGARAID_SCSI_320_0 0x1960 +#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_0 0xA520 + +#define PCI_DEVICE_ID_MEGARAID_SCSI_320_1 0x1960 +#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_1 0x0520 + +#define PCI_DEVICE_ID_MEGARAID_SCSI_320_2 0x1960 +#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2 0x0518 + +#define PCI_DEVICE_ID_MEGARAID_I4_133_RAID 0x1960 +#define PCI_SUBSYS_ID_MEGARAID_I4_133_RAID 0x0522 + +#define PCI_DEVICE_ID_MEGARAID_SATA_150_4 0x1960 +#define PCI_SUBSYS_ID_MEGARAID_SATA_150_4 0x4523 + +#define PCI_DEVICE_ID_MEGARAID_SATA_150_6 0x1960 +#define PCI_SUBSYS_ID_MEGARAID_SATA_150_6 0x0523 + +#define PCI_DEVICE_ID_LINDSAY 0x0409 + +#define PCI_DEVICE_ID_INTEL_RAID_SRCS16 0x1960 +#define PCI_SUBSYS_ID_INTEL_RAID_SRCS16 0x0523 + +#define PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK 0x1960 +#define PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK 0x0520 + +#define PCI_SUBSYS_ID_PERC3_QC 0x0471 +#define PCI_SUBSYS_ID_PERC3_DC 0x0493 +#define PCI_SUBSYS_ID_PERC3_SC 0x0475 +#define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511 + + +#define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel +#define MBOX_MAX_USER_CMDS 32 // number of cmds for applications +#define MBOX_DEF_CMD_PER_LUN 64 // default commands per lun +#define MBOX_DEFAULT_SG_SIZE 26 // default sg size supported by all fw +#define MBOX_MAX_SG_SIZE 32 // maximum scatter-gather list size +#define MBOX_MAX_SECTORS 128 // maximum sectors per IO +#define MBOX_TIMEOUT 30 // timeout value for internal cmds +#define MBOX_BUSY_WAIT 10 // max usec to wait for busy mailbox +#define MBOX_RESET_WAIT 180 // wait these many seconds in reset +#define MBOX_RESET_EXT_WAIT 120 // extended wait reset +#define MBOX_SYNC_WAIT_CNT 0xFFFF // wait loop index for synchronous mode + +#define MBOX_SYNC_DELAY_200 200 // 200 micro-seconds + +/* + * maximum transfer that can happen through the firmware commands issued + * internnaly from the driver. + */ +#define MBOX_IBUF_SIZE 4096 + + +/** + * mbox_ccb_t - command control block specific to mailbox based controllers + * @raw_mbox : raw mailbox pointer + * @mbox : mailbox + * @mbox64 : extended mailbox + * @mbox_dma_h : maibox dma address + * @sgl64 : 64-bit scatter-gather list + * @sgl32 : 32-bit scatter-gather list + * @sgl_dma_h : dma handle for the scatter-gather list + * @pthru : passthru structure + * @pthru_dma_h : dma handle for the passthru structure + * @epthru : extended passthru structure + * @epthru_dma_h : dma handle for extended passthru structure + * @buf_dma_h : dma handle for buffers w/o sg list + * + * command control block specific to the mailbox based controllers + */ +typedef struct { + uint8_t *raw_mbox; + mbox_t *mbox; + mbox64_t *mbox64; + dma_addr_t mbox_dma_h; + mbox_sgl64 *sgl64; + mbox_sgl32 *sgl32; + dma_addr_t sgl_dma_h; + mraid_passthru_t *pthru; + dma_addr_t pthru_dma_h; + mraid_epassthru_t *epthru; + dma_addr_t epthru_dma_h; + dma_addr_t buf_dma_h; +} mbox_ccb_t; + + +/** + * mraid_device_t - adapter soft state structure for mailbox controllers + * @una_mbox64 : 64-bit mbox - unaligned + * @una_mbox64_dma : mbox dma addr - unaligned + * @mbox : 32-bit mbox - aligned + * @mbox64 : 64-bit mbox - aligned + * @mbox_dma : mbox dma addr - aligned + * @mailbox_lock : exclusion lock for the mailbox + * @baseport : base port of hba memory + * @baseaddr : mapped addr of hba memory + * @mbox_pool : pool of mailboxes + * @mbox_pool_handle : handle for the mailbox pool memory + * @epthru_pool : a pool for extended passthru commands + * @epthru_pool_handle : handle to the pool above + * @sg_pool : pool of scatter-gather lists for this driver + * @sg_pool_handle : handle to the pool above + * @ccb_list : list of our command control blocks + * @uccb_list : list of cmd control blocks for mgmt module + * @umbox64 : array of mailbox for user commands (cmm) + * @pdrv_state : array for state of each physical drive. + * @last_disp : flag used to show device scanning + * @hw_error : set if FW not responding + * @fast_load : If set, skip physical device scanning + * @channel_class : channel class, RAID or SCSI + * @sysfs_mtx : mutex to serialize access to sysfs res. + * @sysfs_uioc : management packet to issue FW calls from sysfs + * @sysfs_mbox64 : mailbox packet to issue FW calls from sysfs + * @sysfs_buffer : data buffer for FW commands issued from sysfs + * @sysfs_buffer_dma : DMA buffer for FW commands issued from sysfs + * @sysfs_wait_q : wait queue for sysfs operations + * @random_del_supported : set if the random deletion is supported + * @curr_ldmap : current LDID map + * + * Initialization structure for mailbox controllers: memory based and IO based + * All the fields in this structure are LLD specific and may be discovered at + * init() or start() time. + * + * NOTE: The fields of this structures are placed to minimize cache misses + */ +#define MAX_LD_EXTENDED64 64 +typedef struct { + mbox64_t *una_mbox64; + dma_addr_t una_mbox64_dma; + mbox_t *mbox; + mbox64_t *mbox64; + dma_addr_t mbox_dma; + spinlock_t mailbox_lock; + unsigned long baseport; + void __iomem * baseaddr; + struct mraid_pci_blk mbox_pool[MBOX_MAX_SCSI_CMDS]; + struct dma_pool *mbox_pool_handle; + struct mraid_pci_blk epthru_pool[MBOX_MAX_SCSI_CMDS]; + struct dma_pool *epthru_pool_handle; + struct mraid_pci_blk sg_pool[MBOX_MAX_SCSI_CMDS]; + struct dma_pool *sg_pool_handle; + mbox_ccb_t ccb_list[MBOX_MAX_SCSI_CMDS]; + mbox_ccb_t uccb_list[MBOX_MAX_USER_CMDS]; + mbox64_t umbox64[MBOX_MAX_USER_CMDS]; + + uint8_t pdrv_state[MBOX_MAX_PHYSICAL_DRIVES]; + uint32_t last_disp; + int hw_error; + int fast_load; + uint8_t channel_class; + struct mutex sysfs_mtx; + uioc_t *sysfs_uioc; + mbox64_t *sysfs_mbox64; + caddr_t sysfs_buffer; + dma_addr_t sysfs_buffer_dma; + wait_queue_head_t sysfs_wait_q; + int random_del_supported; + uint16_t curr_ldmap[MAX_LD_EXTENDED64]; +} mraid_device_t; + +// route to raid device from adapter +#define ADAP2RAIDDEV(adp) ((mraid_device_t *)((adp)->raid_device)) + +#define MAILBOX_LOCK(rdev) (&(rdev)->mailbox_lock) + +// Find out if this channel is a RAID or SCSI +#define IS_RAID_CH(rdev, ch) (((rdev)->channel_class >> (ch)) & 0x01) + + +#define RDINDOOR(rdev) readl((rdev)->baseaddr + 0x20) +#define RDOUTDOOR(rdev) readl((rdev)->baseaddr + 0x2C) +#define WRINDOOR(rdev, value) writel(value, (rdev)->baseaddr + 0x20) +#define WROUTDOOR(rdev, value) writel(value, (rdev)->baseaddr + 0x2C) + +#endif // _MEGARAID_H_ + +// vim: set ts=8 sw=8 tw=78: |