diff options
Diffstat (limited to 'drivers/scsi/qlogicfas.c')
| -rw-r--r-- | drivers/scsi/qlogicfas.c | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/drivers/scsi/qlogicfas.c b/drivers/scsi/qlogicfas.c new file mode 100644 index 000000000..95431d605 --- /dev/null +++ b/drivers/scsi/qlogicfas.c @@ -0,0 +1,225 @@ +/* + * Qlogic FAS408 ISA card driver + * + * Copyright 1994, Tom Zerucha. + * tz@execpc.com + * + * Redistributable under terms of the GNU General Public License + * + * For the avoidance of doubt the "preferred form" of this code is one which + * is in an open non patent encumbered format. Where cryptographic key signing + * forms part of the process of creating an executable the information + * including keys needed to generate an equivalently functional executable + * are deemed to be part of the source code. + * + * Check qlogicfas408.c for more credits and info. + */ + +#include <linux/module.h> +#include <linux/blkdev.h> /* to get disk capacity */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/proc_fs.h> +#include <linux/unistd.h> +#include <linux/spinlock.h> +#include <linux/stat.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/dma.h> + +#include "scsi.h" +#include <scsi/scsi_host.h> +#include "qlogicfas408.h" + +/* Set the following to 2 to use normal interrupt (active high/totempole- + * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open + * drain + */ +#define INT_TYPE 2 + +static char qlogicfas_name[] = "qlogicfas"; + +/* + * Look for qlogic card and init if found + */ + +static struct Scsi_Host *__qlogicfas_detect(struct scsi_host_template *host, + int qbase, + int qlirq) +{ + int qltyp; /* type of chip */ + int qinitid; + struct Scsi_Host *hreg; /* registered host structure */ + struct qlogicfas408_priv *priv; + + /* Qlogic Cards only exist at 0x230 or 0x330 (the chip itself + * decodes the address - I check 230 first since MIDI cards are + * typically at 0x330 + * + * Theoretically, two Qlogic cards can coexist in the same system. + * This should work by simply using this as a loadable module for + * the second card, but I haven't tested this. + */ + + if (!qbase || qlirq == -1) + goto err; + + if (!request_region(qbase, 0x10, qlogicfas_name)) { + printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name, + qbase); + goto err; + } + + if (!qlogicfas408_detect(qbase, INT_TYPE)) { + printk(KERN_WARNING "%s: probe failed for %#x\n", + qlogicfas_name, + qbase); + goto err_release_mem; + } + + printk(KERN_INFO "%s: Using preset base address of %03x," + " IRQ %d\n", qlogicfas_name, qbase, qlirq); + + qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE); + qinitid = host->this_id; + if (qinitid < 0) + qinitid = 7; /* if no ID, use 7 */ + + qlogicfas408_setup(qbase, qinitid, INT_TYPE); + + hreg = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv)); + if (!hreg) + goto err_release_mem; + priv = get_priv_by_host(hreg); + hreg->io_port = qbase; + hreg->n_io_port = 16; + hreg->dma_channel = -1; + if (qlirq != -1) + hreg->irq = qlirq; + priv->qbase = qbase; + priv->qlirq = qlirq; + priv->qinitid = qinitid; + priv->shost = hreg; + priv->int_type = INT_TYPE; + + sprintf(priv->qinfo, + "Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d", + qltyp, qbase, qlirq, QL_TURBO_PDMA); + host->name = qlogicfas_name; + + if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogicfas_name, hreg)) + goto free_scsi_host; + + if (scsi_add_host(hreg, NULL)) + goto free_interrupt; + + scsi_scan_host(hreg); + + return hreg; + +free_interrupt: + free_irq(qlirq, hreg); + +free_scsi_host: + scsi_host_put(hreg); + +err_release_mem: + release_region(qbase, 0x10); +err: + return NULL; +} + +#define MAX_QLOGICFAS 8 +static struct qlogicfas408_priv *cards; +static int iobase[MAX_QLOGICFAS]; +static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 }; +module_param_hw_array(iobase, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +MODULE_PARM_DESC(iobase, "I/O address"); +MODULE_PARM_DESC(irq, "IRQ"); + +static int qlogicfas_detect(struct scsi_host_template *sht) +{ + struct Scsi_Host *shost; + struct qlogicfas408_priv *priv; + int num; + + for (num = 0; num < MAX_QLOGICFAS; num++) { + shost = __qlogicfas_detect(sht, iobase[num], irq[num]); + if (shost == NULL) { + /* no more devices */ + break; + } + priv = get_priv_by_host(shost); + priv->next = cards; + cards = priv; + } + + return num; +} + +static int qlogicfas_release(struct Scsi_Host *shost) +{ + struct qlogicfas408_priv *priv = get_priv_by_host(shost); + + scsi_remove_host(shost); + if (shost->irq) { + qlogicfas408_disable_ints(priv); + free_irq(shost->irq, shost); + } + if (shost->io_port && shost->n_io_port) + release_region(shost->io_port, shost->n_io_port); + scsi_host_put(shost); + + return 0; +} + +/* + * The driver template is also needed for PCMCIA + */ +static struct scsi_host_template qlogicfas_driver_template = { + .module = THIS_MODULE, + .name = qlogicfas_name, + .proc_name = qlogicfas_name, + .info = qlogicfas408_info, + .queuecommand = qlogicfas408_queuecommand, + .eh_abort_handler = qlogicfas408_abort, + .eh_host_reset_handler = qlogicfas408_host_reset, + .bios_param = qlogicfas408_biosparam, + .can_queue = 1, + .this_id = -1, + .sg_tablesize = SG_ALL, + .use_clustering = DISABLE_CLUSTERING, +}; + +static __init int qlogicfas_init(void) +{ + if (!qlogicfas_detect(&qlogicfas_driver_template)) { + /* no cards found */ + printk(KERN_INFO "%s: no cards were found, please specify " + "I/O address and IRQ using iobase= and irq= " + "options", qlogicfas_name); + return -ENODEV; + } + + return 0; +} + +static __exit void qlogicfas_exit(void) +{ + struct qlogicfas408_priv *priv; + + for (priv = cards; priv != NULL; priv = priv->next) + qlogicfas_release(priv->shost); +} + +MODULE_AUTHOR("Tom Zerucha, Michael Griffith"); +MODULE_DESCRIPTION("Driver for the Qlogic FAS408 based ISA card"); +MODULE_LICENSE("GPL"); +module_init(qlogicfas_init); +module_exit(qlogicfas_exit); + |