diff options
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/spi-fsl-cpm.c | 23 | ||||
-rw-r--r-- | drivers/spi/spi-fsl-spi.c | 63 | ||||
-rw-r--r-- | drivers/spi/spi-imx.c | 24 | ||||
-rw-r--r-- | drivers/spi/spi-qup.c | 57 |
4 files changed, 111 insertions, 56 deletions
diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 8f7b26ec1..0485593dc 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -25,6 +25,7 @@ #include <linux/spi/spi.h> #include <linux/types.h> #include <linux/platform_device.h> +#include <linux/byteorder/generic.h> #include "spi-fsl-cpm.h" #include "spi-fsl-lib.h" @@ -124,6 +125,21 @@ int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, mspi->rx_dma = mspi->dma_dummy_rx; mspi->map_rx_dma = 0; } + if (t->bits_per_word == 16 && t->tx_buf) { + const u16 *src = t->tx_buf; + u16 *dst; + int i; + + dst = kmalloc(t->len, GFP_KERNEL); + if (!dst) + return -ENOMEM; + + for (i = 0; i < t->len >> 1; i++) + dst[i] = cpu_to_le16p(src + i); + + mspi->tx = dst; + mspi->map_tx_dma = 1; + } if (mspi->map_tx_dma) { void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */ @@ -177,6 +193,13 @@ void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) if (mspi->map_rx_dma) dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE); mspi->xfer_in_progress = NULL; + + if (t->bits_per_word == 16 && t->rx_buf) { + int i; + + for (i = 0; i < t->len; i += 2) + le16_to_cpus(t->rx_buf + i); + } } EXPORT_SYMBOL_GPL(fsl_spi_cpm_bufs_complete); diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index cd784552d..5e49fed48 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -201,24 +201,6 @@ static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) -{ - /* QE uses Little Endian for words > 8 - * so transform all words > 8 into 8 bits - * Unfortnatly that doesn't work for LSB so - * reject these for now */ - /* Note: 32 bits word, LSB works iff - * tfcr/rfcr is set to CPMFCR_GBL */ - if (spi->mode & SPI_LSB_FIRST && - bits_per_word > 8) - return -EINVAL; - if (bits_per_word > 8) - return 8; /* pretend its 8 bits */ - return bits_per_word; -} - static int fsl_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) { @@ -246,9 +228,6 @@ static int fsl_spi_setup_transfer(struct spi_device *spi, bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, mpc8xxx_spi, bits_per_word); - else if (mpc8xxx_spi->flags & SPI_QE) - bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, - bits_per_word); if (bits_per_word < 0) return bits_per_word; @@ -355,12 +334,44 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, static int fsl_spi_do_one_msg(struct spi_master *master, struct spi_message *m) { + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master); struct spi_device *spi = m->spi; struct spi_transfer *t, *first; unsigned int cs_change; const int nsecs = 50; int status; + /* + * In CPU mode, optimize large byte transfers to use larger + * bits_per_word values to reduce number of interrupts taken. + */ + list_for_each_entry(t, &m->transfers, transfer_list) { + if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) { + if (t->len < 256 || t->bits_per_word != 8) + continue; + if ((t->len & 3) == 0) + t->bits_per_word = 32; + else if ((t->len & 1) == 0) + t->bits_per_word = 16; + } else { + /* + * CPM/QE uses Little Endian for words > 8 + * so transform 16 and 32 bits words into 8 bits + * Unfortnatly that doesn't work for LSB so + * reject these for now + * Note: 32 bits word, LSB works iff + * tfcr/rfcr is set to CPMFCR_GBL + */ + if (m->spi->mode & SPI_LSB_FIRST && t->bits_per_word > 8) + return -EINVAL; + if (t->bits_per_word == 16 || t->bits_per_word == 32) + t->bits_per_word = 8; /* pretend its 8 bits */ + if (t->bits_per_word == 8 && t->len >= 256 && + (mpc8xxx_spi->flags & SPI_CPM1)) + t->bits_per_word = 16; + } + } + /* Don't allow changes if CS is active */ first = list_first_entry(&m->transfers, struct spi_transfer, transfer_list); @@ -640,8 +651,14 @@ static struct spi_master * fsl_spi_probe(struct device *dev, if (mpc8xxx_spi->type == TYPE_GRLIB) fsl_spi_grlib_probe(dev); - master->bits_per_word_mask = - (SPI_BPW_RANGE_MASK(4, 16) | SPI_BPW_MASK(32)) & + if (mpc8xxx_spi->flags & SPI_CPM_MODE) + master->bits_per_word_mask = + (SPI_BPW_RANGE_MASK(4, 8) | SPI_BPW_MASK(16) | SPI_BPW_MASK(32)); + else + master->bits_per_word_mask = + (SPI_BPW_RANGE_MASK(4, 16) | SPI_BPW_MASK(32)); + + master->bits_per_word_mask &= SPI_BPW_RANGE_MASK(1, mpc8xxx_spi->max_bits_per_word); if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index ec2296a4c..1ad4b6929 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -237,6 +237,18 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, return true; } +/* + * Note the number of natively supported chip selects for MX51 is 4. Some + * devices may have less actual SS pins but the register map supports 4. When + * using gpio chip selects the cs values passed into the macros below can go + * outside the range 0 - 3. We therefore need to limit the cs value to avoid + * corrupting bits outside the allocated locations. + * + * The simplest way to do this is to just mask the cs bits to 2 bits. This + * still allows all 4 native chip selects to work as well as gpio chip selects + * (which can use any of the 4 chip select configurations). + */ + #define MX51_ECSPI_CTRL 0x08 #define MX51_ECSPI_CTRL_ENABLE (1 << 0) #define MX51_ECSPI_CTRL_XCH (1 << 2) @@ -245,16 +257,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, #define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16) #define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 #define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 -#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18) +#define MX51_ECSPI_CTRL_CS(cs) ((cs & 3) << 18) #define MX51_ECSPI_CTRL_BL_OFFSET 20 #define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20) #define MX51_ECSPI_CONFIG 0x0c -#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) -#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) -#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) -#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) -#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20)) +#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs & 3) + 0)) +#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs & 3) + 4)) +#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs & 3) + 8)) +#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs & 3) + 12)) +#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs & 3) + 20)) #define MX51_ECSPI_INT 0x10 #define MX51_ECSPI_INT_TEEN (1 << 0) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 1ca678bcb..1518a8bf4 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -1003,23 +1003,8 @@ static int spi_qup_probe(struct platform_device *pdev) return -ENXIO; } - ret = clk_prepare_enable(cclk); - if (ret) { - dev_err(dev, "cannot enable core clock\n"); - return ret; - } - - ret = clk_prepare_enable(iclk); - if (ret) { - clk_disable_unprepare(cclk); - dev_err(dev, "cannot enable iface clock\n"); - return ret; - } - master = spi_alloc_master(dev, sizeof(struct spi_qup)); if (!master) { - clk_disable_unprepare(cclk); - clk_disable_unprepare(iclk); dev_err(dev, "cannot allocate master\n"); return -ENOMEM; } @@ -1065,6 +1050,19 @@ static int spi_qup_probe(struct platform_device *pdev) spin_lock_init(&controller->lock); init_completion(&controller->done); + ret = clk_prepare_enable(cclk); + if (ret) { + dev_err(dev, "cannot enable core clock\n"); + goto error_dma; + } + + ret = clk_prepare_enable(iclk); + if (ret) { + clk_disable_unprepare(cclk); + dev_err(dev, "cannot enable iface clock\n"); + goto error_dma; + } + iomode = readl_relaxed(base + QUP_IO_M_MODES); size = QUP_IO_M_OUTPUT_BLOCK_SIZE(iomode); @@ -1094,7 +1092,7 @@ static int spi_qup_probe(struct platform_device *pdev) ret = spi_qup_set_state(controller, QUP_STATE_RESET); if (ret) { dev_err(dev, "cannot set RESET state\n"); - goto error_dma; + goto error_clk; } writel_relaxed(0, base + QUP_OPERATIONAL); @@ -1118,7 +1116,7 @@ static int spi_qup_probe(struct platform_device *pdev) ret = devm_request_irq(dev, irq, spi_qup_qup_irq, IRQF_TRIGGER_HIGH, pdev->name, controller); if (ret) - goto error_dma; + goto error_clk; pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); pm_runtime_use_autosuspend(dev); @@ -1133,11 +1131,12 @@ static int spi_qup_probe(struct platform_device *pdev) disable_pm: pm_runtime_disable(&pdev->dev); +error_clk: + clk_disable_unprepare(cclk); + clk_disable_unprepare(iclk); error_dma: spi_qup_release_dma(master); error: - clk_disable_unprepare(cclk); - clk_disable_unprepare(iclk); spi_master_put(master); return ret; } @@ -1250,17 +1249,21 @@ static int spi_qup_remove(struct platform_device *pdev) int ret; ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) - return ret; - ret = spi_qup_set_state(controller, QUP_STATE_RESET); - if (ret) - return ret; + if (ret >= 0) { + ret = spi_qup_set_state(controller, QUP_STATE_RESET); + if (ret) + dev_warn(&pdev->dev, "failed to reset controller (%pe)\n", + ERR_PTR(ret)); - spi_qup_release_dma(master); + clk_disable_unprepare(controller->cclk); + clk_disable_unprepare(controller->iclk); + } else { + dev_warn(&pdev->dev, "failed to resume, skip hw disable (%pe)\n", + ERR_PTR(ret)); + } - clk_disable_unprepare(controller->cclk); - clk_disable_unprepare(controller->iclk); + spi_qup_release_dma(master); pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); |