diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/tty/serial/lantiq.c | 74 |
1 files changed, 42 insertions, 32 deletions
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 044128277..6cd168cb6 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -113,6 +113,13 @@ struct ltq_uart_port { unsigned int err_irq; }; +static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg) +{ + u32 tmp = __raw_readl(reg); + + __raw_writel((tmp & ~clear) | set, reg); +} + static inline struct ltq_uart_port *to_ltq_uart_port(struct uart_port *port) { @@ -138,7 +145,7 @@ lqasc_start_tx(struct uart_port *port) static void lqasc_stop_rx(struct uart_port *port) { - ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); + __raw_writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); } static int @@ -147,11 +154,12 @@ lqasc_rx_chars(struct uart_port *port) struct tty_port *tport = &port->state->port; unsigned int ch = 0, rsr = 0, fifocnt; - fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK; + fifocnt = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_RXFFLMASK; while (fifocnt--) { u8 flag = TTY_NORMAL; - ch = ltq_r8(port->membase + LTQ_ASC_RBUF); - rsr = (ltq_r32(port->membase + LTQ_ASC_STATE) + ch = readb(port->membase + LTQ_ASC_RBUF); + rsr = (__raw_readl(port->membase + LTQ_ASC_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX; tty_flip_buffer_push(tport); port->icount.rx++; @@ -163,16 +171,16 @@ lqasc_rx_chars(struct uart_port *port) if (rsr & ASCSTATE_ANY) { if (rsr & ASCSTATE_PE) { port->icount.parity++; - ltq_w32_mask(0, ASCWHBSTATE_CLRPE, + asc_update_bits(0, ASCWHBSTATE_CLRPE, port->membase + LTQ_ASC_WHBSTATE); } else if (rsr & ASCSTATE_FE) { port->icount.frame++; - ltq_w32_mask(0, ASCWHBSTATE_CLRFE, + asc_update_bits(0, ASCWHBSTATE_CLRFE, port->membase + LTQ_ASC_WHBSTATE); } if (rsr & ASCSTATE_ROE) { port->icount.overrun++; - ltq_w32_mask(0, ASCWHBSTATE_CLRROE, + asc_update_bits(0, ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE); } @@ -211,10 +219,10 @@ lqasc_tx_chars(struct uart_port *port) return; } - while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) & + while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { if (port->x_char) { - ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF); + writeb(port->x_char, port->membase + LTQ_ASC_TBUF); port->icount.tx++; port->x_char = 0; continue; @@ -223,7 +231,7 @@ lqasc_tx_chars(struct uart_port *port) if (uart_circ_empty(xmit)) break; - ltq_w8(port->state->xmit.buf[port->state->xmit.tail], + writeb(port->state->xmit.buf[port->state->xmit.tail], port->membase + LTQ_ASC_TBUF); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; @@ -239,7 +247,7 @@ lqasc_tx_int(int irq, void *_port) unsigned long flags; struct uart_port *port = (struct uart_port *)_port; spin_lock_irqsave(<q_asc_lock, flags); - ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); + __raw_writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); spin_unlock_irqrestore(<q_asc_lock, flags); lqasc_start_tx(port); return IRQ_HANDLED; @@ -251,8 +259,9 @@ lqasc_err_int(int irq, void *_port) unsigned long flags; struct uart_port *port = (struct uart_port *)_port; spin_lock_irqsave(<q_asc_lock, flags); + __raw_writel(ASC_IRNCR_EIR, port->membase + LTQ_ASC_IRNCR); /* clear any pending interrupts */ - ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | + asc_update_bits(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE); spin_unlock_irqrestore(<q_asc_lock, flags); return IRQ_HANDLED; @@ -264,7 +273,7 @@ lqasc_rx_int(int irq, void *_port) unsigned long flags; struct uart_port *port = (struct uart_port *)_port; spin_lock_irqsave(<q_asc_lock, flags); - ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); + __raw_writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); lqasc_rx_chars(port); spin_unlock_irqrestore(<q_asc_lock, flags); return IRQ_HANDLED; @@ -274,7 +283,8 @@ static unsigned int lqasc_tx_empty(struct uart_port *port) { int status; - status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK; + status = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_TXFFLMASK; return status ? 0 : TIOCSER_TEMT; } @@ -304,15 +314,15 @@ lqasc_startup(struct uart_port *port) clk_enable(ltq_port->clk); port->uartclk = clk_get_rate(ltq_port->fpiclk); - ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), + asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), port->membase + LTQ_ASC_CLC); - ltq_w32(0, port->membase + LTQ_ASC_PISEL); - ltq_w32( + __raw_writel(0, port->membase + LTQ_ASC_PISEL); + __raw_writel( ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); - ltq_w32( + __raw_writel( ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, port->membase + LTQ_ASC_RXFCON); @@ -320,7 +330,7 @@ lqasc_startup(struct uart_port *port) * setting enable bits */ wmb(); - ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | + asc_update_bits(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN, port->membase + LTQ_ASC_CON); retval = request_irq(ltq_port->tx_irq, lqasc_tx_int, @@ -344,7 +354,7 @@ lqasc_startup(struct uart_port *port) goto err2; } - ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, + __raw_writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, port->membase + LTQ_ASC_IRNREN); return 0; @@ -363,10 +373,10 @@ lqasc_shutdown(struct uart_port *port) free_irq(ltq_port->rx_irq, port); free_irq(ltq_port->err_irq, port); - ltq_w32(0, port->membase + LTQ_ASC_CON); - ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, + __raw_writel(0, port->membase + LTQ_ASC_CON); + asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, port->membase + LTQ_ASC_RXFCON); - ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, + asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); if (!IS_ERR(ltq_port->clk)) clk_disable(ltq_port->clk); @@ -438,7 +448,7 @@ lqasc_set_termios(struct uart_port *port, spin_lock_irqsave(<q_asc_lock, flags); /* set up CON */ - ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON); + asc_update_bits(0, con, port->membase + LTQ_ASC_CON); /* Set baud rate - take a divider of 2 into account */ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); @@ -446,22 +456,22 @@ lqasc_set_termios(struct uart_port *port, divisor = divisor / 2 - 1; /* disable the baudrate generator */ - ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON); + asc_update_bits(ASCCON_R, 0, port->membase + LTQ_ASC_CON); /* make sure the fractional divider is off */ - ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON); + asc_update_bits(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON); /* set up to use divisor of 2 */ - ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); + asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); /* now we can write the new baudrate into the register */ - ltq_w32(divisor, port->membase + LTQ_ASC_BG); + __raw_writel(divisor, port->membase + LTQ_ASC_BG); /* turn the baudrate generator back on */ - ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON); + asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON); /* enable rx */ - ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); + __raw_writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); spin_unlock_irqrestore(<q_asc_lock, flags); @@ -572,10 +582,10 @@ lqasc_console_putchar(struct uart_port *port, int ch) return; do { - fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT) + fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; } while (fifofree == 0); - ltq_w8(ch, port->membase + LTQ_ASC_TBUF); + writeb(ch, port->membase + LTQ_ASC_TBUF); } static void lqasc_serial_port_write(struct uart_port *port, const char *s, |