diff options
Diffstat (limited to 'drivers/tty/serial/sunzilog.c')
| -rw-r--r-- | drivers/tty/serial/sunzilog.c | 1653 |
1 files changed, 1653 insertions, 0 deletions
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c new file mode 100644 index 000000000..bc7af8b08 --- /dev/null +++ b/drivers/tty/serial/sunzilog.c @@ -0,0 +1,1653 @@ +// SPDX-License-Identifier: GPL-2.0 +/* sunzilog.c: Zilog serial driver for Sparc systems. + * + * Driver for Zilog serial chips found on Sun workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the old drivers/sbus/char/zs.c code. A lot + * of code has been simply moved over directly from there but + * much has been rewritten. Credits therefore go out to Eddie + * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their + * work there. + * + * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/major.h> +#include <linux/string.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/circ_buf.h> +#include <linux/serial.h> +#include <linux/sysrq.h> +#include <linux/console.h> +#include <linux/spinlock.h> +#ifdef CONFIG_SERIO +#include <linux/serio.h> +#endif +#include <linux/init.h> +#include <linux/of_device.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/setup.h> + +#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/serial_core.h> +#include <linux/sunserialcore.h> + +#include "sunzilog.h" + +/* On 32-bit sparcs we need to delay after register accesses + * to accommodate sun4 systems, but we do not need to flush writes. + * On 64-bit sparc we only need to flush single writes to ensure + * completion. + */ +#ifndef CONFIG_SPARC64 +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) +#else +#define ZSDELAY() +#define ZSDELAY_LONG() +#define ZS_WSYNC(__channel) \ + readb(&((__channel)->control)) +#endif + +#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_sunzilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_sunzilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 +#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 +#define SUNZILOG_FLAG_IS_CONS 0x00000004 +#define SUNZILOG_FLAG_IS_KGDB 0x00000008 +#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 +#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define SUNZILOG_FLAG_REGS_HELD 0x00000040 +#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 +#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 +#define SUNZILOG_FLAG_ESCC 0x00000200 +#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400 + + unsigned int cflag; + + unsigned char parity_mask; + unsigned char prev_status; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static void sunzilog_putchar(struct uart_port *port, int ch); + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) + +#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) +#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) +#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the Sun4 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) +{ + int i; + int escc; + unsigned char r15; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + sunzilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN); + + /* ESCC Extension Register */ + r15 = read_zsreg(channel, R15); + if (r15 & 0x01) { + write_zsreg(channel, R7, regs[R7p]); + + /* External status interrupt and FIFO control. */ + write_zsreg(channel, R15, regs[R15] & ~WR7pEN); + escc = 1; + } else { + /* Clear FIFO bit case it is an issue */ + regs[R15] &= ~FIFOEN; + escc = 0; + } + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */ + write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */ + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); + + return escc; +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= SUNZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) +{ + unsigned int cur_cflag = up->cflag; + int brg, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); +} + +static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, + unsigned char ch, int is_break) +{ + if (ZS_IS_KEYB(up)) { + /* Stop-A is handled by drivers/char/keyboard.c now. */ +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (ZS_IS_MOUSE(up)) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunzilog_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + break; + } + } +} + +static struct tty_port * +sunzilog_receive_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct tty_port *port = NULL; + unsigned char ch, r1, flag; + + if (up->port.state != NULL) /* Unopened serial console */ + port = &up->port.state->port; + + for (;;) { + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + break; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { + sunzilog_kbdms_receive_chars(up, ch, 0); + continue; + } + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { + if (r1 & BRK_ABRT) { + r1 &= ~(PAR_ERR | CRC_ERR); + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + continue; + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch) || !port) + continue; + + if (up->port.ignore_status_mask == 0xff || + (r1 & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(port, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + } + + return port; +} + +static void sunzilog_status_handle(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (status & BRK_ABRT) { + if (ZS_IS_MOUSE(up)) + sunzilog_kbdms_receive_chars(up, 0, 1); + if (ZS_IS_CONS(up)) { + /* Wait for BREAK to deassert to avoid potentially + * confusing the PROM. + */ + while (1) { + status = readb(&channel->control); + ZSDELAY(); + if (!(status & BRK_ABRT)) + break; + } + sun_do_break(); + return; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becoming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~SUNZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t sunzilog_interrupt(int irq, void *dev_id) +{ + struct uart_sunzilog_port *up = dev_id; + + while (up) { + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_port *port; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + port = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + port = sunzilog_receive_chars(up, channel); + if (r3 & CHAEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHATxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (port) + tty_flip_buffer_push(port); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + port = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + port = sunzilog_receive_chars(up, channel); + if (r3 & CHBEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHBTxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (port) + tty_flip_buffer_push(port); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel __iomem *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int sunzilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = sunzilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int sunzilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = sunzilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_stop_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + + up->flags |= SUNZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_start_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit)) + return; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held. */ +static void sunzilog_stop_rx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + sunzilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void sunzilog_enable_ms(struct uart_port *port) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN); + } +} + +/* The port lock is not held. */ +static void sunzilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __sunzilog_startup(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + sunzilog_maybe_update_regs(up, channel); +} + +static int sunzilog_startup(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __sunzilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King <rmk@arm.linux.org.uk> + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void sunzilog_shutdown(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + sunzilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[R3] &= ~RxN_MASK; + up->curregs[R5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[R3] |= Rx5; + up->curregs[R5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[R3] |= Rx6; + up->curregs[R5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[R3] |= Rx7; + up->curregs[R5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[R3] |= Rx8; + up->curregs[R5] |= Tx8; + up->parity_mask = 0xff; + break; + } + up->curregs[R4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[R4] |= SB2; + else + up->curregs[R4] |= SB1; + if (cflag & PARENB) + up->curregs[R4] |= PAR_ENAB; + else + up->curregs[R4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[R4] |= PAR_EVEN; + else + up->curregs[R4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= SUNZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; + + up->cflag = termios->c_cflag; + + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunzilog_type(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + + return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void sunzilog_release_port(struct uart_port *port) +{ +} + +static int sunzilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void sunzilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int sunzilog_get_poll_char(struct uart_port *port) +{ + unsigned char ch, r1; + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + return NO_POLL_CHAR; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + return ch; +} + +static void sunzilog_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + + sunzilog_putchar(&up->port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops sunzilog_pops = { + .tx_empty = sunzilog_tx_empty, + .set_mctrl = sunzilog_set_mctrl, + .get_mctrl = sunzilog_get_mctrl, + .stop_tx = sunzilog_stop_tx, + .start_tx = sunzilog_start_tx, + .stop_rx = sunzilog_stop_rx, + .enable_ms = sunzilog_enable_ms, + .break_ctl = sunzilog_break_ctl, + .startup = sunzilog_startup, + .shutdown = sunzilog_shutdown, + .set_termios = sunzilog_set_termios, + .type = sunzilog_type, + .release_port = sunzilog_release_port, + .request_port = sunzilog_request_port, + .config_port = sunzilog_config_port, + .verify_port = sunzilog_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sunzilog_get_poll_char, + .poll_put_char = sunzilog_put_poll_char, +#endif +}; + +static int uart_chip_count; +static struct uart_sunzilog_port *sunzilog_port_table; +static struct zilog_layout __iomem **sunzilog_chip_regs; + +static struct uart_sunzilog_port *sunzilog_irq_chain; + +static struct uart_driver sunzilog_reg = { + .owner = THIS_MODULE, + .driver_name = "sunzilog", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __init sunzilog_alloc_tables(int num_sunzilog) +{ + struct uart_sunzilog_port *up; + unsigned long size; + int num_channels = num_sunzilog * 2; + int i; + + size = num_channels * sizeof(struct uart_sunzilog_port); + sunzilog_port_table = kzalloc(size, GFP_KERNEL); + if (!sunzilog_port_table) + return -ENOMEM; + + for (i = 0; i < num_channels; i++) { + up = &sunzilog_port_table[i]; + + spin_lock_init(&up->port.lock); + + if (i == 0) + sunzilog_irq_chain = up; + + if (i < num_channels - 1) + up->next = up + 1; + else + up->next = NULL; + } + + size = num_sunzilog * sizeof(struct zilog_layout __iomem *); + sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); + if (!sunzilog_chip_regs) { + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + return -ENOMEM; + } + + return 0; +} + +static void sunzilog_free_tables(void) +{ + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + kfree(sunzilog_chip_regs); +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +static void sunzilog_putchar(struct uart_port *port, int ch) +{ + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunzilog_serio_lock); + +static int sunzilog_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + + sunzilog_putchar(&up->port, ch); + + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return 0; +} + +static int sunzilog_serio_open(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return ret; +} + +static void sunzilog_serio_close(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE +static void +sunzilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int locked = 1; + + if (up->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + uart_console_write(&up->port, s, count, sunzilog_putchar); + udelay(2); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init sunzilog_console_setup(struct console *con, char *options) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int baud, brg; + + if (up->port.type != PORT_SUNZILOG) + return -1; + + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", + (sunzilog_reg.minor - 64) + con->index, con->index); + + /* Get firmware console settings. */ + sunserial_console_termios(con, up->port.dev->of_node); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + } + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + sunzilog_convert_to_zs(up, con->cflag, 0, brg); + + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunzilog_console_ops = { + .name = "ttyS", + .write = sunzilog_console_write, + .device = uart_console_device, + .setup = sunzilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunzilog_reg, +}; + +static inline struct console *SUNZILOG_CONSOLE(void) +{ + return &sunzilog_console_ops; +} + +#else +#define SUNZILOG_CONSOLE() (NULL) +#endif + +static void sunzilog_init_kbdms(struct uart_sunzilog_port *up) +{ + int baud, brg; + + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + + up->curregs[R15] |= BRKIE; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + sunzilog_convert_to_zs(up, up->cflag, 0, brg); + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); +} + +#ifdef CONFIG_SERIO +static void sunzilog_register_serio(struct uart_sunzilog_port *up) +{ + struct serio *serio = &up->serio; + + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "zskbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "zsms", sizeof(serio->name)); + } + strlcpy(serio->phys, + ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? + "zs/serio0" : "zs/serio1"), + sizeof(serio->phys)); + + serio->write = sunzilog_serio_write; + serio->open = sunzilog_serio_open; + serio->close = sunzilog_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +} +#endif + +static void sunzilog_init_hw(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + unsigned long flags; + int baud, brg; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + if (ZS_IS_CHANNEL_A(up)) { + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + } + + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) { + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R7p] = 0x00; + sunzilog_init_kbdms(up); + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } else { + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + baud = 9600; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */ + up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL; + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + +#ifdef CONFIG_SERIO + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) + sunzilog_register_serio(up); +#endif +} + +static int zilog_irq; + +static int zs_probe(struct platform_device *op) +{ + static int kbm_inst, uart_inst; + int inst; + struct uart_sunzilog_port *up; + struct zilog_layout __iomem *rp; + int keyboard_mouse = 0; + int err; + + if (of_find_property(op->dev.of_node, "keyboard", NULL)) + keyboard_mouse = 1; + + /* uarts must come before keyboards/mice */ + if (keyboard_mouse) + inst = uart_chip_count + kbm_inst; + else + inst = uart_inst; + + sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, + sizeof(struct zilog_layout), + "zs"); + if (!sunzilog_chip_regs[inst]) + return -ENOMEM; + + rp = sunzilog_chip_regs[inst]; + + if (!zilog_irq) + zilog_irq = op->archdata.irqs[0]; + + up = &sunzilog_port_table[inst * 2]; + + /* Channel A */ + up[0].port.mapbase = op->resource[0].start + 0x00; + up[0].port.membase = (void __iomem *) &rp->channelA; + up[0].port.iotype = UPIO_MEM; + up[0].port.irq = op->archdata.irqs[0]; + up[0].port.uartclk = ZS_CLOCK; + up[0].port.fifosize = 1; + up[0].port.ops = &sunzilog_pops; + up[0].port.type = PORT_SUNZILOG; + up[0].port.flags = 0; + up[0].port.line = (inst * 2) + 0; + up[0].port.dev = &op->dev; + up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; + if (keyboard_mouse) + up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; + sunzilog_init_hw(&up[0]); + + /* Channel B */ + up[1].port.mapbase = op->resource[0].start + 0x04; + up[1].port.membase = (void __iomem *) &rp->channelB; + up[1].port.iotype = UPIO_MEM; + up[1].port.irq = op->archdata.irqs[0]; + up[1].port.uartclk = ZS_CLOCK; + up[1].port.fifosize = 1; + up[1].port.ops = &sunzilog_pops; + up[1].port.type = PORT_SUNZILOG; + up[1].port.flags = 0; + up[1].port.line = (inst * 2) + 1; + up[1].port.dev = &op->dev; + up[1].flags |= 0; + if (keyboard_mouse) + up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; + sunzilog_init_hw(&up[1]); + + if (!keyboard_mouse) { + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[0].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[0].port); + if (err) { + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[1].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[1].port); + if (err) { + uart_remove_one_port(&sunzilog_reg, &up[0].port); + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + uart_inst++; + } else { + printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[0].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[0].port)); + printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[1].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[1].port)); + kbm_inst++; + } + + platform_set_drvdata(op, &up[0]); + + return 0; +} + +static void zs_remove_one(struct uart_sunzilog_port *up) +{ + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else + uart_remove_one_port(&sunzilog_reg, &up->port); +} + +static int zs_remove(struct platform_device *op) +{ + struct uart_sunzilog_port *up = platform_get_drvdata(op); + struct zilog_layout __iomem *regs; + + zs_remove_one(&up[0]); + zs_remove_one(&up[1]); + + regs = sunzilog_chip_regs[up[0].port.line / 2]; + of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); + + return 0; +} + +static const struct of_device_id zs_match[] = { + { + .name = "zs", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, zs_match); + +static struct platform_driver zs_driver = { + .driver = { + .name = "zs", + .of_match_table = zs_match, + }, + .probe = zs_probe, + .remove = zs_remove, +}; + +static int __init sunzilog_init(void) +{ + struct device_node *dp; + int err; + int num_keybms = 0; + int num_sunzilog = 0; + + for_each_node_by_name(dp, "zs") { + num_sunzilog++; + if (of_find_property(dp, "keyboard", NULL)) + num_keybms++; + } + + if (num_sunzilog) { + err = sunzilog_alloc_tables(num_sunzilog); + if (err) + goto out; + + uart_chip_count = num_sunzilog - num_keybms; + + err = sunserial_register_minors(&sunzilog_reg, + uart_chip_count * 2); + if (err) + goto out_free_tables; + } + + err = platform_driver_register(&zs_driver); + if (err) + goto out_unregister_uart; + + if (zilog_irq) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, + "zs", sunzilog_irq_chain); + if (err) + goto out_unregister_driver; + + /* Enable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags |= SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + } + +out: + return err; + +out_unregister_driver: + platform_driver_unregister(&zs_driver); + +out_unregister_uart: + if (num_sunzilog) { + sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); + sunzilog_reg.cons = NULL; + } + +out_free_tables: + sunzilog_free_tables(); + goto out; +} + +static void __exit sunzilog_exit(void) +{ + platform_driver_unregister(&zs_driver); + + if (zilog_irq) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + + /* Disable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] &= ~MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + + free_irq(zilog_irq, sunzilog_irq_chain); + zilog_irq = 0; + } + + if (sunzilog_reg.nr) { + sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); + sunzilog_free_tables(); + } +} + +module_init(sunzilog_init); +module_exit(sunzilog_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("Sun Zilog serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); |