summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_dw.c3
-rw-r--r--drivers/tty/serial/8250/8250_port.c4
-rw-r--r--drivers/tty/serial/amba-pl011.c23
-rw-r--r--drivers/tty/serial/fsl_lpuart.c4
-rw-r--r--drivers/tty/serial/lpc32xx_hs.c2
-rw-r--r--drivers/tty/serial/mvebu-uart.c36
-rw-r--r--drivers/tty/serial/samsung.c5
-rw-r--r--drivers/tty/serial/serial-tegra.c5
-rw-r--r--drivers/tty/serial/stm32-usart.c2
-rw-r--r--drivers/tty/serial/ucc_uart.c2
10 files changed, 62 insertions, 24 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index c73d0eddd..cc9d1f416 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -140,12 +140,15 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
/* Returns once the transmitter is empty or we run out of retries */
static void dw8250_tx_wait_empty(struct uart_port *p)
{
+ struct uart_8250_port *up = up_to_u8250p(p);
unsigned int tries = 20000;
unsigned int delay_threshold = tries - 1000;
unsigned int lsr;
while (tries--) {
lsr = readb (p->membase + (UART_LSR << p->regshift));
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+
if (lsr & UART_LSR_TEMT)
break;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5a2e67a8d..f11d12025 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2917,8 +2917,10 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
case UPIO_MEM32BE:
case UPIO_MEM16:
case UPIO_MEM:
- if (!port->mapbase)
+ if (!port->mapbase) {
+ ret = -EINVAL;
break;
+ }
if (!request_mem_region(port->mapbase, size, "serial")) {
ret = -EBUSY;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 5edc3813a..7de4bed1d 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1335,6 +1335,15 @@ static void pl011_stop_rx(struct uart_port *port)
pl011_dma_rx_stop(uap);
}
+static void pl011_throttle_rx(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ pl011_stop_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
static void pl011_enable_ms(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1728,9 +1737,10 @@ static int pl011_allocate_irq(struct uart_amba_port *uap)
*/
static void pl011_enable_interrupts(struct uart_amba_port *uap)
{
+ unsigned long flags;
unsigned int i;
- spin_lock_irq(&uap->port.lock);
+ spin_lock_irqsave(&uap->port.lock, flags);
/* Clear out any spuriously appearing RX interrupts */
pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
@@ -1752,7 +1762,14 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
pl011_write(uap->im, uap, REG_IMSC);
- spin_unlock_irq(&uap->port.lock);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static void pl011_unthrottle_rx(struct uart_port *port)
+{
+ struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+
+ pl011_enable_interrupts(uap);
}
static int pl011_startup(struct uart_port *port)
@@ -2127,6 +2144,8 @@ static const struct uart_ops amba_pl011_pops = {
.stop_tx = pl011_stop_tx,
.start_tx = pl011_start_tx,
.stop_rx = pl011_stop_rx,
+ .throttle = pl011_throttle_rx,
+ .unthrottle = pl011_unthrottle_rx,
.enable_ms = pl011_enable_ms,
.break_ctl = pl011_break_ctl,
.startup = pl011_startup,
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b757fd1bd..069d02354 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1102,9 +1102,9 @@ static int lpuart_config_rs485(struct uart_port *port,
* Note: UART is assumed to be active high.
*/
if (rs485->flags & SER_RS485_RTS_ON_SEND)
- modem &= ~UARTMODEM_TXRTSPOL;
- else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
modem |= UARTMODEM_TXRTSPOL;
+ else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ modem &= ~UARTMODEM_TXRTSPOL;
}
/* Store the new configuration */
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index d1d732615..9c145ed0d 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -341,7 +341,7 @@ static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
LPC32XX_HSUART_IIR(port->membase));
port->icount.overrun++;
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
- tty_schedule_flip(tport);
+ tty_flip_buffer_push(tport);
}
/* Data received? */
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 77f3f3728..70f74ebc2 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -237,6 +237,7 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
struct tty_port *tport = &port->state->port;
unsigned char ch = 0;
char flag = 0;
+ int ret;
do {
if (status & STAT_RX_RDY(port)) {
@@ -249,6 +250,16 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
port->icount.parity++;
}
+ /*
+ * For UART2, error bits are not cleared on buffer read.
+ * This causes interrupt loop and system hang.
+ */
+ if (IS_EXTENDED(port) && (status & STAT_BRK_ERR)) {
+ ret = readl(port->membase + UART_STAT);
+ ret |= STAT_BRK_ERR;
+ writel(ret, port->membase + UART_STAT);
+ }
+
if (status & STAT_BRK_DET) {
port->icount.brk++;
status &= ~(STAT_FRM_ERR | STAT_PAR_ERR);
@@ -442,14 +453,14 @@ static void mvebu_uart_shutdown(struct uart_port *port)
}
}
-static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
+static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
{
struct mvebu_uart *mvuart = to_mvuart(port);
unsigned int d_divisor, m_divisor;
u32 brdv;
if (IS_ERR(mvuart->clk))
- return -PTR_ERR(mvuart->clk);
+ return 0;
/*
* The baudrate is derived from the UART clock thanks to two divisors:
@@ -469,7 +480,7 @@ static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
brdv |= d_divisor;
writel(brdv, port->membase + UART_BRDV);
- return 0;
+ return DIV_ROUND_CLOSEST(port->uartclk, d_divisor * m_divisor);
}
static void mvebu_uart_set_termios(struct uart_port *port,
@@ -506,15 +517,11 @@ static void mvebu_uart_set_termios(struct uart_port *port,
max_baud = 230400;
baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud);
- if (mvebu_uart_baud_rate_set(port, baud)) {
- /* No clock available, baudrate cannot be changed */
- if (old)
- baud = uart_get_baud_rate(port, old, NULL,
- min_baud, max_baud);
- } else {
- tty_termios_encode_baud_rate(termios, baud, baud);
- uart_update_timeout(port, termios->c_cflag, baud);
- }
+ baud = mvebu_uart_baud_rate_set(port, baud);
+
+ /* In case baudrate cannot be changed, report previous old value */
+ if (baud == 0 && old)
+ baud = tty_termios_baud_rate(old);
/* Only the following flag changes are supported */
if (old) {
@@ -525,6 +532,11 @@ static void mvebu_uart_set_termios(struct uart_port *port,
termios->c_cflag |= CS8;
}
+ if (baud != 0) {
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_update_timeout(port, termios->c_cflag, baud);
+ }
+
spin_unlock_irqrestore(&port->lock, flags);
}
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 49661cef5..964d6d33b 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -238,8 +238,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
/* Enable tx dma mode */
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
- ucon |= (dma_get_cache_alignment() >= 16) ?
- S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+ ucon |= S3C64XX_UCON_TXBURST_1;
ucon |= S3C64XX_UCON_TXMODE_DMA;
wr_regl(port, S3C2410_UCON, ucon);
@@ -512,7 +511,7 @@ static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
S3C64XX_UCON_DMASUS_EN |
S3C64XX_UCON_TIMEOUT_EN |
S3C64XX_UCON_RXMODE_MASK);
- ucon |= S3C64XX_UCON_RXBURST_16 |
+ ucon |= S3C64XX_UCON_RXBURST_1 |
0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
S3C64XX_UCON_EMPTYINT_EN |
S3C64XX_UCON_TIMEOUT_EN |
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index af2a29cfb..ee480a148 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -398,7 +398,7 @@ static void tegra_uart_tx_dma_complete(void *args)
count = tup->tx_bytes_requested - state.residue;
async_tx_ack(tup->tx_dma_desc);
spin_lock_irqsave(&tup->uport.lock, flags);
- xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ uart_xmit_advance(&tup->uport, count);
tup->tx_in_progress = 0;
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&tup->uport);
@@ -482,7 +482,6 @@ static unsigned int tegra_uart_tx_empty(struct uart_port *u)
static void tegra_uart_stop_tx(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
- struct circ_buf *xmit = &tup->uport.state->xmit;
struct dma_tx_state state;
unsigned int count;
@@ -493,7 +492,7 @@ static void tegra_uart_stop_tx(struct uart_port *u)
dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
count = tup->tx_bytes_requested - state.residue;
async_tx_ack(tup->tx_dma_desc);
- xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ uart_xmit_advance(&tup->uport, count);
tup->tx_in_progress = 0;
}
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index bb2f6f02c..d8e1b0356 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -72,6 +72,8 @@ static void stm32_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE,
*cr3 |= USART_CR3_DEM;
over8 = *cr1 & USART_CR1_OVER8;
+ *cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
+
if (over8)
rs485_deat_dedt = delay_ADE * baud * 8;
else
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 2b6376e6e..eb0d3f552 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1141,6 +1141,8 @@ static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
/* No compatible property, so try the name. */
soc_string = np->name;
+ of_node_put(np);
+
/* Extract the SOC number from the "PowerPC," string */
if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
return 0;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 23:22:49 +0000