diff options
Diffstat (limited to 'drivers/usb/class')
| -rw-r--r-- | drivers/usb/class/Kconfig | 48 | ||||
| -rw-r--r-- | drivers/usb/class/Makefile | 10 | ||||
| -rw-r--r-- | drivers/usb/class/cdc-acm.c | 2140 | ||||
| -rw-r--r-- | drivers/usb/class/cdc-acm.h | 147 | ||||
| -rw-r--r-- | drivers/usb/class/cdc-wdm.c | 1196 | ||||
| -rw-r--r-- | drivers/usb/class/usblp.c | 1473 | ||||
| -rw-r--r-- | drivers/usb/class/usbtmc.c | 1723 |
7 files changed, 6737 insertions, 0 deletions
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig new file mode 100644 index 000000000..971385fe9 --- /dev/null +++ b/drivers/usb/class/Kconfig @@ -0,0 +1,48 @@ +# +# USB Class driver configuration +# +comment "USB Device Class drivers" + +config USB_ACM + tristate "USB Modem (CDC ACM) support" + depends on TTY + ---help--- + This driver supports USB modems and ISDN adapters which support the + Communication Device Class Abstract Control Model interface. + Please read <file:Documentation/usb/acm.txt> for details. + + If your modem only reports "Cls=ff(vend.)" in the descriptors in + /sys/kernel/debug/usb/devices, then your modem will not work with this + driver. + + To compile this driver as a module, choose M here: the + module will be called cdc-acm. + +config USB_PRINTER + tristate "USB Printer support" + help + Say Y here if you want to connect a USB printer to your computer's + USB port. + + To compile this driver as a module, choose M here: the + module will be called usblp. + +config USB_WDM + tristate "USB Wireless Device Management support" + ---help--- + This driver supports the WMC Device Management functionality + of cell phones compliant to the CDC WMC specification. You can use + AT commands over this device. + + To compile this driver as a module, choose M here: the + module will be called cdc-wdm. + +config USB_TMC + tristate "USB Test and Measurement Class support" + help + Say Y here if you want to connect a USB device that follows + the USB.org specification for USB Test and Measurement devices + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called usbtmc. diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile new file mode 100644 index 000000000..5d393a28f --- /dev/null +++ b/drivers/usb/class/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for USB Class drivers +# (one step up from the misc category) +# + +obj-$(CONFIG_USB_ACM) += cdc-acm.o +obj-$(CONFIG_USB_PRINTER) += usblp.o +obj-$(CONFIG_USB_WDM) += cdc-wdm.o +obj-$(CONFIG_USB_TMC) += usbtmc.o diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c new file mode 100644 index 000000000..0522bd2d9 --- /dev/null +++ b/drivers/usb/class/cdc-acm.c @@ -0,0 +1,2140 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * cdc-acm.c + * + * Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de> + * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> + * Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com> + * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> + * Copyright (c) 2004 Oliver Neukum <oliver@neukum.name> + * Copyright (c) 2005 David Kubicek <dave@awk.cz> + * Copyright (c) 2011 Johan Hovold <jhovold@gmail.com> + * + * USB Abstract Control Model driver for USB modems and ISDN adapters + * + * Sponsored by SuSE + */ + +#undef DEBUG +#undef VERBOSE_DEBUG + +#include <linux/kernel.h> +#include <linux/sched/signal.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/log2.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/cdc.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <linux/idr.h> +#include <linux/list.h> + +#include "cdc-acm.h" + + +#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik, David Kubicek, Johan Hovold" +#define DRIVER_DESC "USB Abstract Control Model driver for USB modems and ISDN adapters" + +static struct usb_driver acm_driver; +static struct tty_driver *acm_tty_driver; + +static DEFINE_IDR(acm_minors); +static DEFINE_MUTEX(acm_minors_lock); + +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old); + +/* + * acm_minors accessors + */ + +/* + * Look up an ACM structure by minor. If found and not disconnected, increment + * its refcount and return it with its mutex held. + */ +static struct acm *acm_get_by_minor(unsigned int minor) +{ + struct acm *acm; + + mutex_lock(&acm_minors_lock); + acm = idr_find(&acm_minors, minor); + if (acm) { + mutex_lock(&acm->mutex); + if (acm->disconnected) { + mutex_unlock(&acm->mutex); + acm = NULL; + } else { + tty_port_get(&acm->port); + mutex_unlock(&acm->mutex); + } + } + mutex_unlock(&acm_minors_lock); + return acm; +} + +/* + * Try to find an available minor number and if found, associate it with 'acm'. + */ +static int acm_alloc_minor(struct acm *acm) +{ + int minor; + + mutex_lock(&acm_minors_lock); + minor = idr_alloc(&acm_minors, acm, 0, ACM_TTY_MINORS, GFP_KERNEL); + mutex_unlock(&acm_minors_lock); + + return minor; +} + +/* Release the minor number associated with 'acm'. */ +static void acm_release_minor(struct acm *acm) +{ + mutex_lock(&acm_minors_lock); + idr_remove(&acm_minors, acm->minor); + mutex_unlock(&acm_minors_lock); +} + +/* + * Functions for ACM control messages. + */ + +static int acm_ctrl_msg(struct acm *acm, int request, int value, + void *buf, int len) +{ + int retval; + + retval = usb_autopm_get_interface(acm->control); + if (retval) + return retval; + + retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), + request, USB_RT_ACM, value, + acm->control->altsetting[0].desc.bInterfaceNumber, + buf, len, 5000); + + dev_dbg(&acm->control->dev, + "%s - rq 0x%02x, val %#x, len %#x, result %d\n", + __func__, request, value, len, retval); + + usb_autopm_put_interface(acm->control); + + return retval < 0 ? retval : 0; +} + +/* devices aren't required to support these requests. + * the cdc acm descriptor tells whether they do... + */ +static inline int acm_set_control(struct acm *acm, int control) +{ + if (acm->quirks & QUIRK_CONTROL_LINE_STATE) + return -EOPNOTSUPP; + + return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, + control, NULL, 0); +} + +#define acm_set_line(acm, line) \ + acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line)) +#define acm_send_break(acm, ms) \ + acm_ctrl_msg(acm, USB_CDC_REQ_SEND_BREAK, ms, NULL, 0) + +static void acm_poison_urbs(struct acm *acm) +{ + int i; + + usb_poison_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_poison_urb(acm->wb[i].urb); + for (i = 0; i < acm->rx_buflimit; i++) + usb_poison_urb(acm->read_urbs[i]); +} + +static void acm_unpoison_urbs(struct acm *acm) +{ + int i; + + for (i = 0; i < acm->rx_buflimit; i++) + usb_unpoison_urb(acm->read_urbs[i]); + for (i = 0; i < ACM_NW; i++) + usb_unpoison_urb(acm->wb[i].urb); + usb_unpoison_urb(acm->ctrlurb); +} + + +/* + * Write buffer management. + * All of these assume proper locks taken by the caller. + */ + +static int acm_wb_alloc(struct acm *acm) +{ + int i, wbn; + struct acm_wb *wb; + + wbn = 0; + i = 0; + for (;;) { + wb = &acm->wb[wbn]; + if (!wb->use) { + wb->use = 1; + wb->len = 0; + return wbn; + } + wbn = (wbn + 1) % ACM_NW; + if (++i >= ACM_NW) + return -1; + } +} + +static int acm_wb_is_avail(struct acm *acm) +{ + int i, n; + unsigned long flags; + + n = ACM_NW; + spin_lock_irqsave(&acm->write_lock, flags); + for (i = 0; i < ACM_NW; i++) + n -= acm->wb[i].use; + spin_unlock_irqrestore(&acm->write_lock, flags); + return n; +} + +/* + * Finish write. Caller must hold acm->write_lock + */ +static void acm_write_done(struct acm *acm, struct acm_wb *wb) +{ + wb->use = 0; + acm->transmitting--; + usb_autopm_put_interface_async(acm->control); +} + +/* + * Poke write. + * + * the caller is responsible for locking + */ + +static int acm_start_wb(struct acm *acm, struct acm_wb *wb) +{ + int rc; + + acm->transmitting++; + + wb->urb->transfer_buffer = wb->buf; + wb->urb->transfer_dma = wb->dmah; + wb->urb->transfer_buffer_length = wb->len; + wb->urb->dev = acm->dev; + + rc = usb_submit_urb(wb->urb, GFP_ATOMIC); + if (rc < 0) { + if (rc != -EPERM) + dev_err(&acm->data->dev, + "%s - usb_submit_urb(write bulk) failed: %d\n", + __func__, rc); + acm_write_done(acm, wb); + } + return rc; +} + +/* + * attributes exported through sysfs + */ +static ssize_t bmCapabilities_show +(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct acm *acm = usb_get_intfdata(intf); + + return sprintf(buf, "%d", acm->ctrl_caps); +} +static DEVICE_ATTR_RO(bmCapabilities); + +static ssize_t wCountryCodes_show +(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct acm *acm = usb_get_intfdata(intf); + + memcpy(buf, acm->country_codes, acm->country_code_size); + return acm->country_code_size; +} + +static DEVICE_ATTR_RO(wCountryCodes); + +static ssize_t iCountryCodeRelDate_show +(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct acm *acm = usb_get_intfdata(intf); + + return sprintf(buf, "%d", acm->country_rel_date); +} + +static DEVICE_ATTR_RO(iCountryCodeRelDate); +/* + * Interrupt handlers for various ACM device responses + */ + +static void acm_process_notification(struct acm *acm, unsigned char *buf) +{ + int newctrl; + int difference; + unsigned long flags; + struct usb_cdc_notification *dr = (struct usb_cdc_notification *)buf; + unsigned char *data = buf + sizeof(struct usb_cdc_notification); + + switch (dr->bNotificationType) { + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + dev_dbg(&acm->control->dev, + "%s - network connection: %d\n", __func__, dr->wValue); + break; + + case USB_CDC_NOTIFY_SERIAL_STATE: + if (le16_to_cpu(dr->wLength) != 2) { + dev_dbg(&acm->control->dev, + "%s - malformed serial state\n", __func__); + break; + } + + newctrl = get_unaligned_le16(data); + dev_dbg(&acm->control->dev, + "%s - serial state: 0x%x\n", __func__, newctrl); + + if (!acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + dev_dbg(&acm->control->dev, + "%s - calling hangup\n", __func__); + tty_port_tty_hangup(&acm->port, false); + } + + difference = acm->ctrlin ^ newctrl; + spin_lock_irqsave(&acm->read_lock, flags); + acm->ctrlin = newctrl; + acm->oldcount = acm->iocount; + + if (difference & ACM_CTRL_DSR) + acm->iocount.dsr++; + if (difference & ACM_CTRL_DCD) + acm->iocount.dcd++; + if (newctrl & ACM_CTRL_BRK) { + acm->iocount.brk++; + tty_insert_flip_char(&acm->port, 0, TTY_BREAK); + } + if (newctrl & ACM_CTRL_RI) + acm->iocount.rng++; + if (newctrl & ACM_CTRL_FRAMING) + acm->iocount.frame++; + if (newctrl & ACM_CTRL_PARITY) + acm->iocount.parity++; + if (newctrl & ACM_CTRL_OVERRUN) + acm->iocount.overrun++; + spin_unlock_irqrestore(&acm->read_lock, flags); + + if (newctrl & ACM_CTRL_BRK) + tty_flip_buffer_push(&acm->port); + + if (difference) + wake_up_all(&acm->wioctl); + + break; + + default: + dev_dbg(&acm->control->dev, + "%s - unknown notification %d received: index %d len %d\n", + __func__, + dr->bNotificationType, dr->wIndex, dr->wLength); + } +} + +/* control interface reports status changes with "interrupt" transfers */ +static void acm_ctrl_irq(struct urb *urb) +{ + struct acm *acm = urb->context; + struct usb_cdc_notification *dr = urb->transfer_buffer; + unsigned int current_size = urb->actual_length; + unsigned int expected_size, copy_size, alloc_size; + int retval; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&acm->control->dev, + "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&acm->control->dev, + "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_mark_last_busy(acm->dev); + + if (acm->nb_index) + dr = (struct usb_cdc_notification *)acm->notification_buffer; + + /* size = notification-header + (optional) data */ + expected_size = sizeof(struct usb_cdc_notification) + + le16_to_cpu(dr->wLength); + + if (current_size < expected_size) { + /* notification is transmitted fragmented, reassemble */ + if (acm->nb_size < expected_size) { + u8 *new_buffer; + alloc_size = roundup_pow_of_two(expected_size); + /* Final freeing is done on disconnect. */ + new_buffer = krealloc(acm->notification_buffer, + alloc_size, GFP_ATOMIC); + if (!new_buffer) { + acm->nb_index = 0; + goto exit; + } + + acm->notification_buffer = new_buffer; + acm->nb_size = alloc_size; + dr = (struct usb_cdc_notification *)acm->notification_buffer; + } + + copy_size = min(current_size, + expected_size - acm->nb_index); + + memcpy(&acm->notification_buffer[acm->nb_index], + urb->transfer_buffer, copy_size); + acm->nb_index += copy_size; + current_size = acm->nb_index; + } + + if (current_size >= expected_size) { + /* notification complete */ + acm_process_notification(acm, (unsigned char *)dr); + acm->nb_index = 0; + } + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval && retval != -EPERM && retval != -ENODEV) + dev_err(&acm->control->dev, + "%s - usb_submit_urb failed: %d\n", __func__, retval); + else + dev_vdbg(&acm->control->dev, + "control resubmission terminated %d\n", retval); +} + +static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags) +{ + int res; + + if (!test_and_clear_bit(index, &acm->read_urbs_free)) + return 0; + + res = usb_submit_urb(acm->read_urbs[index], mem_flags); + if (res) { + if (res != -EPERM && res != -ENODEV) { + dev_err(&acm->data->dev, + "urb %d failed submission with %d\n", + index, res); + } else { + dev_vdbg(&acm->data->dev, "intended failure %d\n", res); + } + set_bit(index, &acm->read_urbs_free); + return res; + } else { + dev_vdbg(&acm->data->dev, "submitted urb %d\n", index); + } + + return 0; +} + +static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags) +{ + int res; + int i; + + for (i = 0; i < acm->rx_buflimit; ++i) { + res = acm_submit_read_urb(acm, i, mem_flags); + if (res) + return res; + } + + return 0; +} + +static void acm_process_read_urb(struct acm *acm, struct urb *urb) +{ + unsigned long flags; + + if (!urb->actual_length) + return; + + spin_lock_irqsave(&acm->read_lock, flags); + tty_insert_flip_string(&acm->port, urb->transfer_buffer, + urb->actual_length); + spin_unlock_irqrestore(&acm->read_lock, flags); + + tty_flip_buffer_push(&acm->port); +} + +static void acm_read_bulk_callback(struct urb *urb) +{ + struct acm_rb *rb = urb->context; + struct acm *acm = rb->instance; + unsigned long flags; + int status = urb->status; + bool stopped = false; + bool stalled = false; + bool cooldown = false; + + dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n", + rb->index, urb->actual_length, status); + + switch (status) { + case 0: + usb_mark_last_busy(acm->dev); + acm_process_read_urb(acm, urb); + break; + case -EPIPE: + set_bit(EVENT_RX_STALL, &acm->flags); + stalled = true; + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&acm->data->dev, + "%s - urb shutting down with status: %d\n", + __func__, status); + stopped = true; + break; + case -EOVERFLOW: + case -EPROTO: + dev_dbg(&acm->data->dev, + "%s - cooling babbling device\n", __func__); + usb_mark_last_busy(acm->dev); + set_bit(rb->index, &acm->urbs_in_error_delay); + set_bit(ACM_ERROR_DELAY, &acm->flags); + cooldown = true; + break; + default: + dev_dbg(&acm->data->dev, + "%s - nonzero urb status received: %d\n", + __func__, status); + break; + } + + /* + * Make sure URB processing is done before marking as free to avoid + * racing with unthrottle() on another CPU. Matches the barriers + * implied by the test_and_clear_bit() in acm_submit_read_urb(). + */ + smp_mb__before_atomic(); + set_bit(rb->index, &acm->read_urbs_free); + /* + * Make sure URB is marked as free before checking the throttled flag + * to avoid racing with unthrottle() on another CPU. Matches the + * smp_mb() in unthrottle(). + */ + smp_mb__after_atomic(); + + if (stopped || stalled || cooldown) { + if (stalled) + schedule_delayed_work(&acm->dwork, 0); + else if (cooldown) + schedule_delayed_work(&acm->dwork, HZ / 2); + return; + } + + /* throttle device if requested by tty */ + spin_lock_irqsave(&acm->read_lock, flags); + acm->throttled = acm->throttle_req; + if (!acm->throttled) { + spin_unlock_irqrestore(&acm->read_lock, flags); + acm_submit_read_urb(acm, rb->index, GFP_ATOMIC); + } else { + spin_unlock_irqrestore(&acm->read_lock, flags); + } +} + +/* data interface wrote those outgoing bytes */ +static void acm_write_bulk(struct urb *urb) +{ + struct acm_wb *wb = urb->context; + struct acm *acm = wb->instance; + unsigned long flags; + int status = urb->status; + + if (status || (urb->actual_length != urb->transfer_buffer_length)) + dev_vdbg(&acm->data->dev, "wrote len %d/%d, status %d\n", + urb->actual_length, + urb->transfer_buffer_length, + status); + + spin_lock_irqsave(&acm->write_lock, flags); + acm_write_done(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); + set_bit(EVENT_TTY_WAKEUP, &acm->flags); + schedule_delayed_work(&acm->dwork, 0); +} + +static void acm_softint(struct work_struct *work) +{ + int i; + struct acm *acm = container_of(work, struct acm, dwork.work); + + if (test_bit(EVENT_RX_STALL, &acm->flags)) { + smp_mb(); /* against acm_suspend() */ + if (!acm->susp_count) { + for (i = 0; i < acm->rx_buflimit; i++) + usb_kill_urb(acm->read_urbs[i]); + usb_clear_halt(acm->dev, acm->in); + acm_submit_read_urbs(acm, GFP_KERNEL); + clear_bit(EVENT_RX_STALL, &acm->flags); + } + } + + if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) { + for (i = 0; i < acm->rx_buflimit; i++) + if (test_and_clear_bit(i, &acm->urbs_in_error_delay)) + acm_submit_read_urb(acm, i, GFP_KERNEL); + } + + if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags)) + tty_port_tty_wakeup(&acm->port); +} + +/* + * TTY handlers + */ + +static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct acm *acm; + int retval; + + acm = acm_get_by_minor(tty->index); + if (!acm) + return -ENODEV; + + retval = tty_standard_install(driver, tty); + if (retval) + goto error_init_termios; + + /* + * Suppress initial echoing for some devices which might send data + * immediately after acm driver has been installed. + */ + if (acm->quirks & DISABLE_ECHO) + tty->termios.c_lflag &= ~ECHO; + + tty->driver_data = acm; + + return 0; + +error_init_termios: + tty_port_put(&acm->port); + return retval; +} + +static int acm_tty_open(struct tty_struct *tty, struct file *filp) +{ + struct acm *acm = tty->driver_data; + + return tty_port_open(&acm->port, tty, filp); +} + +static void acm_port_dtr_rts(struct tty_port *port, int raise) +{ + struct acm *acm = container_of(port, struct acm, port); + int val; + int res; + + if (raise) + val = ACM_CTRL_DTR | ACM_CTRL_RTS; + else + val = 0; + + /* FIXME: add missing ctrlout locking throughout driver */ + acm->ctrlout = val; + + res = acm_set_control(acm, val); + if (res && (acm->ctrl_caps & USB_CDC_CAP_LINE)) + /* This is broken in too many devices to spam the logs */ + dev_dbg(&acm->control->dev, "failed to set dtr/rts\n"); +} + +static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct acm *acm = container_of(port, struct acm, port); + int retval = -ENODEV; + int i; + + mutex_lock(&acm->mutex); + if (acm->disconnected) + goto disconnected; + + retval = usb_autopm_get_interface(acm->control); + if (retval) + goto error_get_interface; + + /* + * FIXME: Why do we need this? Allocating 64K of physically contiguous + * memory is really nasty... + */ + set_bit(TTY_NO_WRITE_SPLIT, &tty->flags); + acm->control->needs_remote_wakeup = 1; + + acm->ctrlurb->dev = acm->dev; + retval = usb_submit_urb(acm->ctrlurb, GFP_KERNEL); + if (retval) { + dev_err(&acm->control->dev, + "%s - usb_submit_urb(ctrl irq) failed\n", __func__); + goto error_submit_urb; + } + + acm_tty_set_termios(tty, NULL); + + /* + * Unthrottle device in case the TTY was closed while throttled. + */ + spin_lock_irq(&acm->read_lock); + acm->throttled = 0; + acm->throttle_req = 0; + spin_unlock_irq(&acm->read_lock); + + retval = acm_submit_read_urbs(acm, GFP_KERNEL); + if (retval) + goto error_submit_read_urbs; + + usb_autopm_put_interface(acm->control); + + mutex_unlock(&acm->mutex); + + return 0; + +error_submit_read_urbs: + for (i = 0; i < acm->rx_buflimit; i++) + usb_kill_urb(acm->read_urbs[i]); + usb_kill_urb(acm->ctrlurb); +error_submit_urb: + usb_autopm_put_interface(acm->control); +error_get_interface: +disconnected: + mutex_unlock(&acm->mutex); + + return usb_translate_errors(retval); +} + +static void acm_port_destruct(struct tty_port *port) +{ + struct acm *acm = container_of(port, struct acm, port); + + if (acm->minor != ACM_MINOR_INVALID) + acm_release_minor(acm); + usb_put_intf(acm->control); + kfree(acm->country_codes); + kfree(acm); +} + +static void acm_port_shutdown(struct tty_port *port) +{ + struct acm *acm = container_of(port, struct acm, port); + struct urb *urb; + struct acm_wb *wb; + + /* + * Need to grab write_lock to prevent race with resume, but no need to + * hold it due to the tty-port initialised flag. + */ + acm_poison_urbs(acm); + spin_lock_irq(&acm->write_lock); + spin_unlock_irq(&acm->write_lock); + + usb_autopm_get_interface_no_resume(acm->control); + acm->control->needs_remote_wakeup = 0; + usb_autopm_put_interface(acm->control); + + for (;;) { + urb = usb_get_from_anchor(&acm->delayed); + if (!urb) + break; + wb = urb->context; + wb->use = 0; + usb_autopm_put_interface_async(acm->control); + } + + acm_unpoison_urbs(acm); + +} + +static void acm_tty_cleanup(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + + tty_port_put(&acm->port); +} + +static void acm_tty_hangup(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + + tty_port_hangup(&acm->port); +} + +static void acm_tty_close(struct tty_struct *tty, struct file *filp) +{ + struct acm *acm = tty->driver_data; + + tty_port_close(&acm->port, tty, filp); +} + +static int acm_tty_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct acm *acm = tty->driver_data; + int stat; + unsigned long flags; + int wbn; + struct acm_wb *wb; + + if (!count) + return 0; + + dev_vdbg(&acm->data->dev, "%d bytes from tty layer\n", count); + + spin_lock_irqsave(&acm->write_lock, flags); + wbn = acm_wb_alloc(acm); + if (wbn < 0) { + spin_unlock_irqrestore(&acm->write_lock, flags); + return 0; + } + wb = &acm->wb[wbn]; + + if (!acm->dev) { + wb->use = 0; + spin_unlock_irqrestore(&acm->write_lock, flags); + return -ENODEV; + } + + count = (count > acm->writesize) ? acm->writesize : count; + dev_vdbg(&acm->data->dev, "writing %d bytes\n", count); + memcpy(wb->buf, buf, count); + wb->len = count; + + stat = usb_autopm_get_interface_async(acm->control); + if (stat) { + wb->use = 0; + spin_unlock_irqrestore(&acm->write_lock, flags); + return stat; + } + + if (acm->susp_count) { + usb_anchor_urb(wb->urb, &acm->delayed); + spin_unlock_irqrestore(&acm->write_lock, flags); + return count; + } + + stat = acm_start_wb(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); + + if (stat < 0) + return stat; + return count; +} + +static int acm_tty_write_room(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + /* + * Do not let the line discipline to know that we have a reserve, + * or it might get too enthusiastic. + */ + return acm_wb_is_avail(acm) ? acm->writesize : 0; +} + +static int acm_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + /* + * if the device was unplugged then any remaining characters fell out + * of the connector ;) + */ + if (acm->disconnected) + return 0; + /* + * This is inaccurate (overcounts), but it works. + */ + return (ACM_NW - acm_wb_is_avail(acm)) * acm->writesize; +} + +static void acm_tty_throttle(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + + spin_lock_irq(&acm->read_lock); + acm->throttle_req = 1; + spin_unlock_irq(&acm->read_lock); +} + +static void acm_tty_unthrottle(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + unsigned int was_throttled; + + spin_lock_irq(&acm->read_lock); + was_throttled = acm->throttled; + acm->throttled = 0; + acm->throttle_req = 0; + spin_unlock_irq(&acm->read_lock); + + /* Matches the smp_mb__after_atomic() in acm_read_bulk_callback(). */ + smp_mb(); + + if (was_throttled) + acm_submit_read_urbs(acm, GFP_KERNEL); +} + +static int acm_tty_break_ctl(struct tty_struct *tty, int state) +{ + struct acm *acm = tty->driver_data; + int retval; + + retval = acm_send_break(acm, state ? 0xffff : 0); + if (retval < 0) + dev_dbg(&acm->control->dev, + "%s - send break failed\n", __func__); + return retval; +} + +static int acm_tty_tiocmget(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + + return (acm->ctrlout & ACM_CTRL_DTR ? TIOCM_DTR : 0) | + (acm->ctrlout & ACM_CTRL_RTS ? TIOCM_RTS : 0) | + (acm->ctrlin & ACM_CTRL_DSR ? TIOCM_DSR : 0) | + (acm->ctrlin & ACM_CTRL_RI ? TIOCM_RI : 0) | + (acm->ctrlin & ACM_CTRL_DCD ? TIOCM_CD : 0) | + TIOCM_CTS; +} + +static int acm_tty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct acm *acm = tty->driver_data; + unsigned int newctrl; + + newctrl = acm->ctrlout; + set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); + clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); + + newctrl = (newctrl & ~clear) | set; + + if (acm->ctrlout == newctrl) + return 0; + return acm_set_control(acm, acm->ctrlout = newctrl); +} + +static int get_serial_info(struct acm *acm, struct serial_struct __user *info) +{ + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + tmp.xmit_fifo_size = acm->writesize; + tmp.baud_base = le32_to_cpu(acm->line.dwDTERate); + tmp.close_delay = jiffies_to_msecs(acm->port.close_delay) / 10; + tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + jiffies_to_msecs(acm->port.closing_wait) / 10; + + if (copy_to_user(info, &tmp, sizeof(tmp))) + return -EFAULT; + else + return 0; +} + +static int set_serial_info(struct acm *acm, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + unsigned int closing_wait, close_delay; + unsigned int old_closing_wait, old_close_delay; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + close_delay = msecs_to_jiffies(new_serial.close_delay * 10); + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + msecs_to_jiffies(new_serial.closing_wait * 10); + + /* we must redo the rounding here, so that the values match */ + old_close_delay = jiffies_to_msecs(acm->port.close_delay) / 10; + old_closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + jiffies_to_msecs(acm->port.closing_wait) / 10; + + mutex_lock(&acm->port.mutex); + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.close_delay != old_close_delay) || + (new_serial.closing_wait != old_closing_wait)) + retval = -EPERM; + } else { + acm->port.close_delay = close_delay; + acm->port.closing_wait = closing_wait; + } + + mutex_unlock(&acm->port.mutex); + return retval; +} + +static int wait_serial_change(struct acm *acm, unsigned long arg) +{ + int rv = 0; + DECLARE_WAITQUEUE(wait, current); + struct async_icount old, new; + + do { + spin_lock_irq(&acm->read_lock); + old = acm->oldcount; + new = acm->iocount; + acm->oldcount = new; + spin_unlock_irq(&acm->read_lock); + + if ((arg & TIOCM_DSR) && + old.dsr != new.dsr) + break; + if ((arg & TIOCM_CD) && + old.dcd != new.dcd) + break; + if ((arg & TIOCM_RI) && + old.rng != new.rng) + break; + + add_wait_queue(&acm->wioctl, &wait); + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + remove_wait_queue(&acm->wioctl, &wait); + if (acm->disconnected) { + if (arg & TIOCM_CD) + break; + else + rv = -ENODEV; + } else { + if (signal_pending(current)) + rv = -ERESTARTSYS; + } + } while (!rv); + + + + return rv; +} + +static int acm_tty_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct acm *acm = tty->driver_data; + + icount->dsr = acm->iocount.dsr; + icount->rng = acm->iocount.rng; + icount->dcd = acm->iocount.dcd; + icount->frame = acm->iocount.frame; + icount->overrun = acm->iocount.overrun; + icount->parity = acm->iocount.parity; + icount->brk = acm->iocount.brk; + + return 0; +} + +static int acm_tty_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct acm *acm = tty->driver_data; + int rv = -ENOIOCTLCMD; + + switch (cmd) { + case TIOCGSERIAL: /* gets serial port data */ + rv = get_serial_info(acm, (struct serial_struct __user *) arg); + break; + case TIOCSSERIAL: + rv = set_serial_info(acm, (struct serial_struct __user *) arg); + break; + case TIOCMIWAIT: + rv = usb_autopm_get_interface(acm->control); + if (rv < 0) { + rv = -EIO; + break; + } + rv = wait_serial_change(acm, arg); + usb_autopm_put_interface(acm->control); + break; + } + + return rv; +} + +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old) +{ + struct acm *acm = tty->driver_data; + struct ktermios *termios = &tty->termios; + struct usb_cdc_line_coding newline; + int newctrl = acm->ctrlout; + + newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty)); + newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0; + newline.bParityType = termios->c_cflag & PARENB ? + (termios->c_cflag & PARODD ? 1 : 2) + + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; + switch (termios->c_cflag & CSIZE) { + case CS5: + newline.bDataBits = 5; + break; + case CS6: + newline.bDataBits = 6; + break; + case CS7: + newline.bDataBits = 7; + break; + case CS8: + default: + newline.bDataBits = 8; + break; + } + /* FIXME: Needs to clear unsupported bits in the termios */ + acm->clocal = ((termios->c_cflag & CLOCAL) != 0); + + if (C_BAUD(tty) == B0) { + newline.dwDTERate = acm->line.dwDTERate; + newctrl &= ~ACM_CTRL_DTR; + } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) { + newctrl |= ACM_CTRL_DTR; + } + + if (newctrl != acm->ctrlout) + acm_set_control(acm, acm->ctrlout = newctrl); + + if (memcmp(&acm->line, &newline, sizeof newline)) { + memcpy(&acm->line, &newline, sizeof newline); + dev_dbg(&acm->control->dev, "%s - set line: %d %d %d %d\n", + __func__, + le32_to_cpu(newline.dwDTERate), + newline.bCharFormat, newline.bParityType, + newline.bDataBits); + acm_set_line(acm, &acm->line); + } +} + +static const struct tty_port_operations acm_port_ops = { + .dtr_rts = acm_port_dtr_rts, + .shutdown = acm_port_shutdown, + .activate = acm_port_activate, + .destruct = acm_port_destruct, +}; + +/* + * USB probe and disconnect routines. + */ + +/* Little helpers: write/read buffers free */ +static void acm_write_buffers_free(struct acm *acm) +{ + int i; + struct acm_wb *wb; + + for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) + usb_free_coherent(acm->dev, acm->writesize, wb->buf, wb->dmah); +} + +static void acm_read_buffers_free(struct acm *acm) +{ + int i; + + for (i = 0; i < acm->rx_buflimit; i++) + usb_free_coherent(acm->dev, acm->readsize, + acm->read_buffers[i].base, acm->read_buffers[i].dma); +} + +/* Little helper: write buffers allocate */ +static int acm_write_buffers_alloc(struct acm *acm) +{ + int i; + struct acm_wb *wb; + + for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { + wb->buf = usb_alloc_coherent(acm->dev, acm->writesize, GFP_KERNEL, + &wb->dmah); + if (!wb->buf) { + while (i != 0) { + --i; + --wb; + usb_free_coherent(acm->dev, acm->writesize, + wb->buf, wb->dmah); + } + return -ENOMEM; + } + } + return 0; +} + +static int acm_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_cdc_union_desc *union_header = NULL; + struct usb_cdc_call_mgmt_descriptor *cmgmd = NULL; + unsigned char *buffer = intf->altsetting->extra; + int buflen = intf->altsetting->extralen; + struct usb_interface *control_interface; + struct usb_interface *data_interface; + struct usb_endpoint_descriptor *epctrl = NULL; + struct usb_endpoint_descriptor *epread = NULL; + struct usb_endpoint_descriptor *epwrite = NULL; + struct usb_device *usb_dev = interface_to_usbdev(intf); + struct usb_cdc_parsed_header h; + struct acm *acm; + int minor; + int ctrlsize, readsize; + u8 *buf; + int call_intf_num = -1; + int data_intf_num = -1; + unsigned long quirks; + int num_rx_buf; + int i; + int combined_interfaces = 0; + struct device *tty_dev; + int rv = -ENOMEM; + int res; + + /* normal quirks */ + quirks = (unsigned long)id->driver_info; + + if (quirks == IGNORE_DEVICE) + return -ENODEV; + + memset(&h, 0x00, sizeof(struct usb_cdc_parsed_header)); + + num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR; + + /* handle quirks deadly to normal probing*/ + if (quirks == NO_UNION_NORMAL) { + data_interface = usb_ifnum_to_if(usb_dev, 1); + control_interface = usb_ifnum_to_if(usb_dev, 0); + /* we would crash */ + if (!data_interface || !control_interface) + return -ENODEV; + goto skip_normal_probe; + } + + /* normal probing*/ + if (!buffer) { + dev_err(&intf->dev, "Weird descriptor references\n"); + return -EINVAL; + } + + if (!intf->cur_altsetting) + return -EINVAL; + + if (!buflen) { + if (intf->cur_altsetting->endpoint && + intf->cur_altsetting->endpoint->extralen && + intf->cur_altsetting->endpoint->extra) { + dev_dbg(&intf->dev, + "Seeking extra descriptors on endpoint\n"); + buflen = intf->cur_altsetting->endpoint->extralen; + buffer = intf->cur_altsetting->endpoint->extra; + } else { + dev_err(&intf->dev, + "Zero length descriptor references\n"); + return -EINVAL; + } + } + + cdc_parse_cdc_header(&h, intf, buffer, buflen); + union_header = h.usb_cdc_union_desc; + cmgmd = h.usb_cdc_call_mgmt_descriptor; + if (cmgmd) + call_intf_num = cmgmd->bDataInterface; + + if (!union_header) { + if (call_intf_num > 0) { + dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n"); + /* quirks for Droids MuIn LCD */ + if (quirks & NO_DATA_INTERFACE) { + data_interface = usb_ifnum_to_if(usb_dev, 0); + } else { + data_intf_num = call_intf_num; + data_interface = usb_ifnum_to_if(usb_dev, data_intf_num); + } + control_interface = intf; + } else { + if (intf->cur_altsetting->desc.bNumEndpoints != 3) { + dev_dbg(&intf->dev,"No union descriptor, giving up\n"); + return -ENODEV; + } else { + dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n"); + combined_interfaces = 1; + control_interface = data_interface = intf; + goto look_for_collapsed_interface; + } + } + } else { + int class = -1; + + data_intf_num = union_header->bSlaveInterface0; + control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); + data_interface = usb_ifnum_to_if(usb_dev, data_intf_num); + + if (control_interface) + class = control_interface->cur_altsetting->desc.bInterfaceClass; + + if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) { + dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n"); + combined_interfaces = 1; + control_interface = data_interface = intf; + goto look_for_collapsed_interface; + } + } + + if (!control_interface || !data_interface) { + dev_dbg(&intf->dev, "no interfaces\n"); + return -ENODEV; + } + if (!data_interface->cur_altsetting || !control_interface->cur_altsetting) + return -ENODEV; + + if (data_intf_num != call_intf_num) + dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); + + if (control_interface == data_interface) { + /* some broken devices designed for windows work this way */ + dev_warn(&intf->dev,"Control and data interfaces are not separated!\n"); + combined_interfaces = 1; + /* a popular other OS doesn't use it */ + quirks |= NO_CAP_LINE; + if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) { + dev_err(&intf->dev, "This needs exactly 3 endpoints\n"); + return -EINVAL; + } +look_for_collapsed_interface: + res = usb_find_common_endpoints(data_interface->cur_altsetting, + &epread, &epwrite, &epctrl, NULL); + if (res) + return res; + + goto made_compressed_probe; + } + +skip_normal_probe: + + /*workaround for switched interfaces */ + if (data_interface->cur_altsetting->desc.bInterfaceClass + != CDC_DATA_INTERFACE_TYPE) { + if (control_interface->cur_altsetting->desc.bInterfaceClass + == CDC_DATA_INTERFACE_TYPE) { + dev_dbg(&intf->dev, + "Your device has switched interfaces.\n"); + swap(control_interface, data_interface); + } else { + return -EINVAL; + } + } + + /* Accept probe requests only for the control interface */ + if (!combined_interfaces && intf != control_interface) + return -ENODEV; + + if (!combined_interfaces && usb_interface_claimed(data_interface)) { + /* valid in this context */ + dev_dbg(&intf->dev, "The data interface isn't available\n"); + return -EBUSY; + } + + + if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 || + control_interface->cur_altsetting->desc.bNumEndpoints == 0) + return -EINVAL; + + epctrl = &control_interface->cur_altsetting->endpoint[0].desc; + epread = &data_interface->cur_altsetting->endpoint[0].desc; + epwrite = &data_interface->cur_altsetting->endpoint[1].desc; + + + /* workaround for switched endpoints */ + if (!usb_endpoint_dir_in(epread)) { + /* descriptors are swapped */ + dev_dbg(&intf->dev, + "The data interface has switched endpoints\n"); + swap(epread, epwrite); + } +made_compressed_probe: + dev_dbg(&intf->dev, "interfaces are valid\n"); + + acm = kzalloc(sizeof(struct acm), GFP_KERNEL); + if (acm == NULL) + goto alloc_fail; + + tty_port_init(&acm->port); + acm->port.ops = &acm_port_ops; + + ctrlsize = usb_endpoint_maxp(epctrl); + readsize = usb_endpoint_maxp(epread) * + (quirks == SINGLE_RX_URB ? 1 : 2); + acm->combined_interfaces = combined_interfaces; + acm->writesize = usb_endpoint_maxp(epwrite) * 20; + acm->control = control_interface; + acm->data = data_interface; + + usb_get_intf(acm->control); /* undone in destruct() */ + + minor = acm_alloc_minor(acm); + if (minor < 0) { + acm->minor = ACM_MINOR_INVALID; + goto alloc_fail1; + } + + acm->minor = minor; + acm->dev = usb_dev; + if (h.usb_cdc_acm_descriptor) + acm->ctrl_caps = h.usb_cdc_acm_descriptor->bmCapabilities; + if (quirks & NO_CAP_LINE) + acm->ctrl_caps &= ~USB_CDC_CAP_LINE; + acm->ctrlsize = ctrlsize; + acm->readsize = readsize; + acm->rx_buflimit = num_rx_buf; + INIT_DELAYED_WORK(&acm->dwork, acm_softint); + init_waitqueue_head(&acm->wioctl); + spin_lock_init(&acm->write_lock); + spin_lock_init(&acm->read_lock); + mutex_init(&acm->mutex); + if (usb_endpoint_xfer_int(epread)) { + acm->bInterval = epread->bInterval; + acm->in = usb_rcvintpipe(usb_dev, epread->bEndpointAddress); + } else { + acm->in = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); + } + if (usb_endpoint_xfer_int(epwrite)) + acm->out = usb_sndintpipe(usb_dev, epwrite->bEndpointAddress); + else + acm->out = usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress); + init_usb_anchor(&acm->delayed); + acm->quirks = quirks; + + buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); + if (!buf) + goto alloc_fail1; + acm->ctrl_buffer = buf; + + if (acm_write_buffers_alloc(acm) < 0) + goto alloc_fail2; + + acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL); + if (!acm->ctrlurb) + goto alloc_fail3; + + for (i = 0; i < num_rx_buf; i++) { + struct acm_rb *rb = &(acm->read_buffers[i]); + struct urb *urb; + + rb->base = usb_alloc_coherent(acm->dev, readsize, GFP_KERNEL, + &rb->dma); + if (!rb->base) + goto alloc_fail4; + rb->index = i; + rb->instance = acm; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto alloc_fail4; + + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + urb->transfer_dma = rb->dma; + if (usb_endpoint_xfer_int(epread)) + usb_fill_int_urb(urb, acm->dev, acm->in, rb->base, + acm->readsize, + acm_read_bulk_callback, rb, + acm->bInterval); + else + usb_fill_bulk_urb(urb, acm->dev, acm->in, rb->base, + acm->readsize, + acm_read_bulk_callback, rb); + + acm->read_urbs[i] = urb; + __set_bit(i, &acm->read_urbs_free); + } + for (i = 0; i < ACM_NW; i++) { + struct acm_wb *snd = &(acm->wb[i]); + + snd->urb = usb_alloc_urb(0, GFP_KERNEL); + if (snd->urb == NULL) + goto alloc_fail5; + + if (usb_endpoint_xfer_int(epwrite)) + usb_fill_int_urb(snd->urb, usb_dev, acm->out, + NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval); + else + usb_fill_bulk_urb(snd->urb, usb_dev, acm->out, + NULL, acm->writesize, acm_write_bulk, snd); + snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (quirks & SEND_ZERO_PACKET) + snd->urb->transfer_flags |= URB_ZERO_PACKET; + snd->instance = acm; + } + + usb_set_intfdata(intf, acm); + + i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); + if (i < 0) + goto alloc_fail5; + + if (h.usb_cdc_country_functional_desc) { /* export the country data */ + struct usb_cdc_country_functional_desc * cfd = + h.usb_cdc_country_functional_desc; + + acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL); + if (!acm->country_codes) + goto skip_countries; + acm->country_code_size = cfd->bLength - 4; + memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, + cfd->bLength - 4); + acm->country_rel_date = cfd->iCountryCodeRelDate; + + i = device_create_file(&intf->dev, &dev_attr_wCountryCodes); + if (i < 0) { + kfree(acm->country_codes); + acm->country_codes = NULL; + acm->country_code_size = 0; + goto skip_countries; + } + + i = device_create_file(&intf->dev, + &dev_attr_iCountryCodeRelDate); + if (i < 0) { + device_remove_file(&intf->dev, &dev_attr_wCountryCodes); + kfree(acm->country_codes); + acm->country_codes = NULL; + acm->country_code_size = 0; + goto skip_countries; + } + } + +skip_countries: + usb_fill_int_urb(acm->ctrlurb, usb_dev, + usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), + acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, + /* works around buggy devices */ + epctrl->bInterval ? epctrl->bInterval : 16); + acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + acm->ctrlurb->transfer_dma = acm->ctrl_dma; + acm->notification_buffer = NULL; + acm->nb_index = 0; + acm->nb_size = 0; + + dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); + + acm->line.dwDTERate = cpu_to_le32(9600); + acm->line.bDataBits = 8; + acm_set_line(acm, &acm->line); + + usb_driver_claim_interface(&acm_driver, data_interface, acm); + usb_set_intfdata(data_interface, acm); + + tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor, + &control_interface->dev); + if (IS_ERR(tty_dev)) { + rv = PTR_ERR(tty_dev); + goto alloc_fail6; + } + + if (quirks & CLEAR_HALT_CONDITIONS) { + usb_clear_halt(usb_dev, acm->in); + usb_clear_halt(usb_dev, acm->out); + } + + return 0; +alloc_fail6: + if (!acm->combined_interfaces) { + /* Clear driver data so that disconnect() returns early. */ + usb_set_intfdata(data_interface, NULL); + usb_driver_release_interface(&acm_driver, data_interface); + } + if (acm->country_codes) { + device_remove_file(&acm->control->dev, + &dev_attr_wCountryCodes); + device_remove_file(&acm->control->dev, + &dev_attr_iCountryCodeRelDate); + } + device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); +alloc_fail5: + usb_set_intfdata(intf, NULL); + for (i = 0; i < ACM_NW; i++) + usb_free_urb(acm->wb[i].urb); +alloc_fail4: + for (i = 0; i < num_rx_buf; i++) + usb_free_urb(acm->read_urbs[i]); + acm_read_buffers_free(acm); + usb_free_urb(acm->ctrlurb); +alloc_fail3: + acm_write_buffers_free(acm); +alloc_fail2: + usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); +alloc_fail1: + tty_port_put(&acm->port); +alloc_fail: + return rv; +} + +static void acm_disconnect(struct usb_interface *intf) +{ + struct acm *acm = usb_get_intfdata(intf); + struct tty_struct *tty; + int i; + + /* sibling interface is already cleaning up */ + if (!acm) + return; + + acm->disconnected = true; + /* + * there is a circular dependency. acm_softint() can resubmit + * the URBs in error handling so we need to block any + * submission right away + */ + acm_poison_urbs(acm); + mutex_lock(&acm->mutex); + if (acm->country_codes) { + device_remove_file(&acm->control->dev, + &dev_attr_wCountryCodes); + device_remove_file(&acm->control->dev, + &dev_attr_iCountryCodeRelDate); + } + wake_up_all(&acm->wioctl); + device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); + usb_set_intfdata(acm->control, NULL); + usb_set_intfdata(acm->data, NULL); + mutex_unlock(&acm->mutex); + + tty = tty_port_tty_get(&acm->port); + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } + + cancel_delayed_work_sync(&acm->dwork); + + tty_unregister_device(acm_tty_driver, acm->minor); + + usb_free_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_free_urb(acm->wb[i].urb); + for (i = 0; i < acm->rx_buflimit; i++) + usb_free_urb(acm->read_urbs[i]); + acm_write_buffers_free(acm); + usb_free_coherent(acm->dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); + acm_read_buffers_free(acm); + + kfree(acm->notification_buffer); + + if (!acm->combined_interfaces) + usb_driver_release_interface(&acm_driver, intf == acm->control ? + acm->data : acm->control); + + tty_port_put(&acm->port); +} + +#ifdef CONFIG_PM +static int acm_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct acm *acm = usb_get_intfdata(intf); + int cnt; + + spin_lock_irq(&acm->write_lock); + if (PMSG_IS_AUTO(message)) { + if (acm->transmitting) { + spin_unlock_irq(&acm->write_lock); + return -EBUSY; + } + } + cnt = acm->susp_count++; + spin_unlock_irq(&acm->write_lock); + + if (cnt) + return 0; + + acm_poison_urbs(acm); + cancel_delayed_work_sync(&acm->dwork); + acm->urbs_in_error_delay = 0; + + return 0; +} + +static int acm_resume(struct usb_interface *intf) +{ + struct acm *acm = usb_get_intfdata(intf); + struct urb *urb; + int rv = 0; + + spin_lock_irq(&acm->write_lock); + + if (--acm->susp_count) + goto out; + + acm_unpoison_urbs(acm); + + if (tty_port_initialized(&acm->port)) { + rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC); + + for (;;) { + urb = usb_get_from_anchor(&acm->delayed); + if (!urb) + break; + + acm_start_wb(acm, urb->context); + } + + /* + * delayed error checking because we must + * do the write path at all cost + */ + if (rv < 0) + goto out; + + rv = acm_submit_read_urbs(acm, GFP_ATOMIC); + } +out: + spin_unlock_irq(&acm->write_lock); + + return rv; +} + +static int acm_reset_resume(struct usb_interface *intf) +{ + struct acm *acm = usb_get_intfdata(intf); + + if (tty_port_initialized(&acm->port)) + tty_port_tty_hangup(&acm->port, false); + + return acm_resume(intf); +} + +#endif /* CONFIG_PM */ + +static int acm_pre_reset(struct usb_interface *intf) +{ + struct acm *acm = usb_get_intfdata(intf); + + clear_bit(EVENT_RX_STALL, &acm->flags); + acm->nb_index = 0; /* pending control transfers are lost */ + + return 0; +} + +#define NOKIA_PCSUITE_ACM_INFO(x) \ + USB_DEVICE_AND_INTERFACE_INFO(0x0421, x, \ + USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \ + USB_CDC_ACM_PROTO_VENDOR) + +#define SAMSUNG_PCSUITE_ACM_INFO(x) \ + USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \ + USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \ + USB_CDC_ACM_PROTO_VENDOR) + +/* + * USB driver structure. + */ + +static const struct usb_device_id acm_ids[] = { + /* quirky and broken devices */ + { USB_DEVICE(0x0424, 0x274e), /* Microchip Technology, Inc. (formerly SMSC) */ + .driver_info = DISABLE_ECHO, }, /* DISABLE ECHO in termios flag */ + { USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */ + .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */ + { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */ + .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */ + { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x045b, 0x023c), /* Renesas USB Download mode */ + .driver_info = DISABLE_ECHO, /* Don't echo banner */ + }, + { USB_DEVICE(0x045b, 0x0248), /* Renesas USB Download mode */ + .driver_info = DISABLE_ECHO, /* Don't echo banner */ + }, + { USB_DEVICE(0x045b, 0x024D), /* Renesas USB Download mode */ + .driver_info = DISABLE_ECHO, /* Don't echo banner */ + }, + { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */ + .driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */ + }, + { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x079b, 0x000f), /* BT On-Air USB MODEM */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0ace, 0x1602), /* ZyDAS 56K USB MODEM */ + .driver_info = SINGLE_RX_URB, + }, + { USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */ + .driver_info = SINGLE_RX_URB, /* firmware bug */ + }, + { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */ + .driver_info = SINGLE_RX_URB, /* firmware bug */ + }, + { USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */ + .driver_info = SINGLE_RX_URB, + }, + { USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0572, 0x1349), /* Hiro (Conexant) USB MODEM H50228 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ + .driver_info = QUIRK_CONTROL_LINE_STATE, }, + { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ + { USB_DEVICE(0x2184, 0x0036) }, /* GW Instek AFG-125 */ + { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ + }, + /* Motorola H24 HSPA module: */ + { USB_DEVICE(0x22b8, 0x2d91) }, /* modem */ + { USB_DEVICE(0x22b8, 0x2d92), /* modem + diagnostics */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + { USB_DEVICE(0x22b8, 0x2d93), /* modem + AT port */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + { USB_DEVICE(0x22b8, 0x2d95), /* modem + AT port + diagnostics */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + { USB_DEVICE(0x22b8, 0x2d96), /* modem + NMEA */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + { USB_DEVICE(0x22b8, 0x2d97), /* modem + diagnostics + NMEA */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + { USB_DEVICE(0x22b8, 0x2d99), /* modem + AT port + NMEA */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + { USB_DEVICE(0x22b8, 0x2d9a), /* modem + AT port + diagnostics + NMEA */ + .driver_info = NO_UNION_NORMAL, /* handle only modem interface */ + }, + + { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ + .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on + data interface instead of + communications interface. + Maybe we should define a new + quirk for this. */ + }, + { USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */ + .driver_info = NO_UNION_NORMAL, + }, + { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */ + .driver_info = NO_UNION_NORMAL, + }, + { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, + { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, + { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, + { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ + .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ + }, + { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, + + { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ + .driver_info = CLEAR_HALT_CONDITIONS, + }, + + /* Nokia S60 phones expose two ACM channels. The first is + * a modem and is picked up by the standard AT-command + * information below. The second is 'vendor-specific' but + * is treated as a serial device at the S60 end, so we want + * to expose it on Linux too. */ + { NOKIA_PCSUITE_ACM_INFO(0x042D), }, /* Nokia 3250 */ + { NOKIA_PCSUITE_ACM_INFO(0x04D8), }, /* Nokia 5500 Sport */ + { NOKIA_PCSUITE_ACM_INFO(0x04C9), }, /* Nokia E50 */ + { NOKIA_PCSUITE_ACM_INFO(0x0419), }, /* Nokia E60 */ + { NOKIA_PCSUITE_ACM_INFO(0x044D), }, /* Nokia E61 */ + { NOKIA_PCSUITE_ACM_INFO(0x0001), }, /* Nokia E61i */ + { NOKIA_PCSUITE_ACM_INFO(0x0475), }, /* Nokia E62 */ + { NOKIA_PCSUITE_ACM_INFO(0x0508), }, /* Nokia E65 */ + { NOKIA_PCSUITE_ACM_INFO(0x0418), }, /* Nokia E70 */ + { NOKIA_PCSUITE_ACM_INFO(0x0425), }, /* Nokia N71 */ + { NOKIA_PCSUITE_ACM_INFO(0x0486), }, /* Nokia N73 */ + { NOKIA_PCSUITE_ACM_INFO(0x04DF), }, /* Nokia N75 */ + { NOKIA_PCSUITE_ACM_INFO(0x000e), }, /* Nokia N77 */ + { NOKIA_PCSUITE_ACM_INFO(0x0445), }, /* Nokia N80 */ + { NOKIA_PCSUITE_ACM_INFO(0x042F), }, /* Nokia N91 & N91 8GB */ + { NOKIA_PCSUITE_ACM_INFO(0x048E), }, /* Nokia N92 */ + { NOKIA_PCSUITE_ACM_INFO(0x0420), }, /* Nokia N93 */ + { NOKIA_PCSUITE_ACM_INFO(0x04E6), }, /* Nokia N93i */ + { NOKIA_PCSUITE_ACM_INFO(0x04B2), }, /* Nokia 5700 XpressMusic */ + { NOKIA_PCSUITE_ACM_INFO(0x0134), }, /* Nokia 6110 Navigator (China) */ + { NOKIA_PCSUITE_ACM_INFO(0x046E), }, /* Nokia 6110 Navigator */ + { NOKIA_PCSUITE_ACM_INFO(0x002f), }, /* Nokia 6120 classic & */ + { NOKIA_PCSUITE_ACM_INFO(0x0088), }, /* Nokia 6121 classic */ + { NOKIA_PCSUITE_ACM_INFO(0x00fc), }, /* Nokia 6124 classic */ + { NOKIA_PCSUITE_ACM_INFO(0x0042), }, /* Nokia E51 */ + { NOKIA_PCSUITE_ACM_INFO(0x00b0), }, /* Nokia E66 */ + { NOKIA_PCSUITE_ACM_INFO(0x00ab), }, /* Nokia E71 */ + { NOKIA_PCSUITE_ACM_INFO(0x0481), }, /* Nokia N76 */ + { NOKIA_PCSUITE_ACM_INFO(0x0007), }, /* Nokia N81 & N81 8GB */ + { NOKIA_PCSUITE_ACM_INFO(0x0071), }, /* Nokia N82 */ + { NOKIA_PCSUITE_ACM_INFO(0x04F0), }, /* Nokia N95 & N95-3 NAM */ + { NOKIA_PCSUITE_ACM_INFO(0x0070), }, /* Nokia N95 8GB */ + { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */ + { NOKIA_PCSUITE_ACM_INFO(0x0099), }, /* Nokia 6210 Navigator, RM-367 */ + { NOKIA_PCSUITE_ACM_INFO(0x0128), }, /* Nokia 6210 Navigator, RM-419 */ + { NOKIA_PCSUITE_ACM_INFO(0x008f), }, /* Nokia 6220 Classic */ + { NOKIA_PCSUITE_ACM_INFO(0x00a0), }, /* Nokia 6650 */ + { NOKIA_PCSUITE_ACM_INFO(0x007b), }, /* Nokia N78 */ + { NOKIA_PCSUITE_ACM_INFO(0x0094), }, /* Nokia N85 */ + { NOKIA_PCSUITE_ACM_INFO(0x003a), }, /* Nokia N96 & N96-3 */ + { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */ + { NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */ + { NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */ + { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */ + { NOKIA_PCSUITE_ACM_INFO(0x0178), }, /* Nokia E63 */ + { NOKIA_PCSUITE_ACM_INFO(0x010e), }, /* Nokia E75 */ + { NOKIA_PCSUITE_ACM_INFO(0x02d9), }, /* Nokia 6760 Slide */ + { NOKIA_PCSUITE_ACM_INFO(0x01d0), }, /* Nokia E52 */ + { NOKIA_PCSUITE_ACM_INFO(0x0223), }, /* Nokia E72 */ + { NOKIA_PCSUITE_ACM_INFO(0x0275), }, /* Nokia X6 */ + { NOKIA_PCSUITE_ACM_INFO(0x026c), }, /* Nokia N97 Mini */ + { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */ + { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ + { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ + { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ + { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */ + { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */ + { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ + + /* Support for Owen devices */ + { USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */ + + /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ + + /* Support for Droids MuIn LCD */ + { USB_DEVICE(0x04d8, 0x000b), + .driver_info = NO_DATA_INTERFACE, + }, + +#if IS_ENABLED(CONFIG_INPUT_IMS_PCU) + { USB_DEVICE(0x04d8, 0x0082), /* Application mode */ + .driver_info = IGNORE_DEVICE, + }, + { USB_DEVICE(0x04d8, 0x0083), /* Bootloader mode */ + .driver_info = IGNORE_DEVICE, + }, + + { USB_DEVICE(0x04d8, 0xf58b), + .driver_info = IGNORE_DEVICE, + }, +#endif + + /*Samsung phone in firmware update mode */ + { USB_DEVICE(0x04e8, 0x685d), + .driver_info = IGNORE_DEVICE, + }, + + /* Exclude Infineon Flash Loader utility */ + { USB_DEVICE(0x058b, 0x0041), + .driver_info = IGNORE_DEVICE, + }, + + /* Exclude ETAS ES58x */ + { USB_DEVICE(0x108c, 0x0159), /* ES581.4 */ + .driver_info = IGNORE_DEVICE, + }, + { USB_DEVICE(0x108c, 0x0168), /* ES582.1 */ + .driver_info = IGNORE_DEVICE, + }, + { USB_DEVICE(0x108c, 0x0169), /* ES584.1 */ + .driver_info = IGNORE_DEVICE, + }, + + { USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */ + .driver_info = SEND_ZERO_PACKET, + }, + { USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */ + .driver_info = SEND_ZERO_PACKET, + }, + + /* Exclude Goodix Fingerprint Reader */ + { USB_DEVICE(0x27c6, 0x5395), + .driver_info = IGNORE_DEVICE, + }, + + /* Exclude Heimann Sensor GmbH USB appset demo */ + { USB_DEVICE(0x32a7, 0x0000), + .driver_info = IGNORE_DEVICE, + }, + + /* control interfaces without any protocol set */ + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_PROTO_NONE) }, + + /* control interfaces with various AT-command sets */ + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_V25TER) }, + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_PCCA101) }, + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_PCCA101_WAKE) }, + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_GSM) }, + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_3G) }, + { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_CDMA) }, + + { USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */ + .driver_info = SEND_ZERO_PACKET, + }, + + { } +}; + +MODULE_DEVICE_TABLE(usb, acm_ids); + +static struct usb_driver acm_driver = { + .name = "cdc_acm", + .probe = acm_probe, + .disconnect = acm_disconnect, +#ifdef CONFIG_PM + .suspend = acm_suspend, + .resume = acm_resume, + .reset_resume = acm_reset_resume, +#endif + .pre_reset = acm_pre_reset, + .id_table = acm_ids, +#ifdef CONFIG_PM + .supports_autosuspend = 1, +#endif + .disable_hub_initiated_lpm = 1, +}; + +/* + * TTY driver structures. + */ + +static const struct tty_operations acm_ops = { + .install = acm_tty_install, + .open = acm_tty_open, + .close = acm_tty_close, + .cleanup = acm_tty_cleanup, + .hangup = acm_tty_hangup, + .write = acm_tty_write, + .write_room = acm_tty_write_room, + .ioctl = acm_tty_ioctl, + .throttle = acm_tty_throttle, + .unthrottle = acm_tty_unthrottle, + .chars_in_buffer = acm_tty_chars_in_buffer, + .break_ctl = acm_tty_break_ctl, + .set_termios = acm_tty_set_termios, + .tiocmget = acm_tty_tiocmget, + .tiocmset = acm_tty_tiocmset, + .get_icount = acm_tty_get_icount, +}; + +/* + * Init / exit. + */ + +static int __init acm_init(void) +{ + int retval; + acm_tty_driver = alloc_tty_driver(ACM_TTY_MINORS); + if (!acm_tty_driver) + return -ENOMEM; + acm_tty_driver->driver_name = "acm", + acm_tty_driver->name = "ttyACM", + acm_tty_driver->major = ACM_TTY_MAJOR, + acm_tty_driver->minor_start = 0, + acm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL, + acm_tty_driver->subtype = SERIAL_TYPE_NORMAL, + acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + acm_tty_driver->init_termios = tty_std_termios; + acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | + HUPCL | CLOCAL; + tty_set_operations(acm_tty_driver, &acm_ops); + + retval = tty_register_driver(acm_tty_driver); + if (retval) { + put_tty_driver(acm_tty_driver); + return retval; + } + + retval = usb_register(&acm_driver); + if (retval) { + tty_unregister_driver(acm_tty_driver); + put_tty_driver(acm_tty_driver); + return retval; + } + + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); + + return 0; +} + +static void __exit acm_exit(void) +{ + usb_deregister(&acm_driver); + tty_unregister_driver(acm_tty_driver); + put_tty_driver(acm_tty_driver); + idr_destroy(&acm_minors); +} + +module_init(acm_init); +module_exit(acm_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h new file mode 100644 index 000000000..02e2ad617 --- /dev/null +++ b/drivers/usb/class/cdc-acm.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * + * Includes for cdc-acm.c + * + * Mainly take from usbnet's cdc-ether part + * + */ + +/* + * CMSPAR, some architectures can't have space and mark parity. + */ + +#ifndef CMSPAR +#define CMSPAR 0 +#endif + +/* + * Major and minor numbers. + */ + +#define ACM_TTY_MAJOR 166 +#define ACM_TTY_MINORS 256 + +#define ACM_MINOR_INVALID ACM_TTY_MINORS + +/* + * Requests. + */ + +#define USB_RT_ACM (USB_TYPE_CLASS | USB_RECIP_INTERFACE) + +/* + * Output control lines. + */ + +#define ACM_CTRL_DTR 0x01 +#define ACM_CTRL_RTS 0x02 + +/* + * Input control lines and line errors. + */ + +#define ACM_CTRL_DCD 0x01 +#define ACM_CTRL_DSR 0x02 +#define ACM_CTRL_BRK 0x04 +#define ACM_CTRL_RI 0x08 + +#define ACM_CTRL_FRAMING 0x10 +#define ACM_CTRL_PARITY 0x20 +#define ACM_CTRL_OVERRUN 0x40 + +/* + * Internal driver structures. + */ + +/* + * The only reason to have several buffers is to accommodate assumptions + * in line disciplines. They ask for empty space amount, receive our URB size, + * and proceed to issue several 1-character writes, assuming they will fit. + * The very first write takes a complete URB. Fortunately, this only happens + * when processing onlcr, so we only need 2 buffers. These values must be + * powers of 2. + */ +#define ACM_NW 16 +#define ACM_NR 16 + +struct acm_wb { + unsigned char *buf; + dma_addr_t dmah; + int len; + int use; + struct urb *urb; + struct acm *instance; +}; + +struct acm_rb { + int size; + unsigned char *base; + dma_addr_t dma; + int index; + struct acm *instance; +}; + +struct acm { + struct usb_device *dev; /* the corresponding usb device */ + struct usb_interface *control; /* control interface */ + struct usb_interface *data; /* data interface */ + unsigned in, out; /* i/o pipes */ + struct tty_port port; /* our tty port data */ + struct urb *ctrlurb; /* urbs */ + u8 *ctrl_buffer; /* buffers of urbs */ + dma_addr_t ctrl_dma; /* dma handles of buffers */ + u8 *country_codes; /* country codes from device */ + unsigned int country_code_size; /* size of this buffer */ + unsigned int country_rel_date; /* release date of version */ + struct acm_wb wb[ACM_NW]; + unsigned long read_urbs_free; + struct urb *read_urbs[ACM_NR]; + struct acm_rb read_buffers[ACM_NR]; + int rx_buflimit; + spinlock_t read_lock; + u8 *notification_buffer; /* to reassemble fragmented notifications */ + unsigned int nb_index; + unsigned int nb_size; + int transmitting; + spinlock_t write_lock; + struct mutex mutex; + bool disconnected; + unsigned long flags; +# define EVENT_TTY_WAKEUP 0 +# define EVENT_RX_STALL 1 +# define ACM_ERROR_DELAY 3 + unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */ + struct usb_cdc_line_coding line; /* bits, stop, parity */ + struct delayed_work dwork; /* work queue entry for various purposes */ + unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */ + unsigned int ctrlout; /* output control lines (DTR, RTS) */ + struct async_icount iocount; /* counters for control line changes */ + struct async_icount oldcount; /* for comparison of counter */ + wait_queue_head_t wioctl; /* for ioctl */ + unsigned int writesize; /* max packet size for the output bulk endpoint */ + unsigned int readsize,ctrlsize; /* buffer sizes for freeing */ + unsigned int minor; /* acm minor number */ + unsigned char clocal; /* termios CLOCAL */ + unsigned int ctrl_caps; /* control capabilities from the class specific header */ + unsigned int susp_count; /* number of suspended interfaces */ + unsigned int combined_interfaces:1; /* control and data collapsed */ + unsigned int throttled:1; /* actually throttled */ + unsigned int throttle_req:1; /* throttle requested */ + u8 bInterval; + struct usb_anchor delayed; /* writes queued for a device about to be woken */ + unsigned long quirks; +}; + +#define CDC_DATA_INTERFACE_TYPE 0x0a + +/* constants describing various quirks and errors */ +#define NO_UNION_NORMAL BIT(0) +#define SINGLE_RX_URB BIT(1) +#define NO_CAP_LINE BIT(2) +#define NO_DATA_INTERFACE BIT(4) +#define IGNORE_DEVICE BIT(5) +#define QUIRK_CONTROL_LINE_STATE BIT(6) +#define CLEAR_HALT_CONDITIONS BIT(7) +#define SEND_ZERO_PACKET BIT(8) +#define DISABLE_ECHO BIT(9) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c new file mode 100644 index 000000000..b60a4200f --- /dev/null +++ b/drivers/usb/class/cdc-wdm.c @@ -0,0 +1,1196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * cdc-wdm.c + * + * This driver supports USB CDC WCM Device Management. + * + * Copyright (c) 2007-2009 Oliver Neukum + * + * Some code taken from cdc-acm.c + * + * Released under the GPLv2. + * + * Many thanks to Carl Nordbeck + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/ioctl.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/bitops.h> +#include <linux/poll.h> +#include <linux/usb.h> +#include <linux/usb/cdc.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <linux/usb/cdc-wdm.h> + +#define DRIVER_AUTHOR "Oliver Neukum" +#define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management" + +static const struct usb_device_id wdm_ids[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM + }, + { } +}; + +MODULE_DEVICE_TABLE (usb, wdm_ids); + +#define WDM_MINOR_BASE 176 + + +#define WDM_IN_USE 1 +#define WDM_DISCONNECTING 2 +#define WDM_RESULT 3 +#define WDM_READ 4 +#define WDM_INT_STALL 5 +#define WDM_POLL_RUNNING 6 +#define WDM_RESPONDING 7 +#define WDM_SUSPENDING 8 +#define WDM_RESETTING 9 +#define WDM_OVERFLOW 10 + +#define WDM_MAX 16 + +/* we cannot wait forever at flush() */ +#define WDM_FLUSH_TIMEOUT (30 * HZ) + +/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */ +#define WDM_DEFAULT_BUFSIZE 256 + +static DEFINE_MUTEX(wdm_mutex); +static DEFINE_SPINLOCK(wdm_device_list_lock); +static LIST_HEAD(wdm_device_list); + +/* --- method tables --- */ + +struct wdm_device { + u8 *inbuf; /* buffer for response */ + u8 *outbuf; /* buffer for command */ + u8 *sbuf; /* buffer for status */ + u8 *ubuf; /* buffer for copy to user space */ + + struct urb *command; + struct urb *response; + struct urb *validity; + struct usb_interface *intf; + struct usb_ctrlrequest *orq; + struct usb_ctrlrequest *irq; + spinlock_t iuspin; + + unsigned long flags; + u16 bufsize; + u16 wMaxCommand; + u16 wMaxPacketSize; + __le16 inum; + int reslength; + int length; + int read; + int count; + dma_addr_t shandle; + dma_addr_t ihandle; + struct mutex wlock; + struct mutex rlock; + wait_queue_head_t wait; + struct work_struct rxwork; + struct work_struct service_outs_intr; + int werr; + int rerr; + int resp_count; + + struct list_head device_list; + int (*manage_power)(struct usb_interface *, int); +}; + +static struct usb_driver wdm_driver; + +/* return intfdata if we own the interface, else look up intf in the list */ +static struct wdm_device *wdm_find_device(struct usb_interface *intf) +{ + struct wdm_device *desc; + + spin_lock(&wdm_device_list_lock); + list_for_each_entry(desc, &wdm_device_list, device_list) + if (desc->intf == intf) + goto found; + desc = NULL; +found: + spin_unlock(&wdm_device_list_lock); + + return desc; +} + +static struct wdm_device *wdm_find_device_by_minor(int minor) +{ + struct wdm_device *desc; + + spin_lock(&wdm_device_list_lock); + list_for_each_entry(desc, &wdm_device_list, device_list) + if (desc->intf->minor == minor) + goto found; + desc = NULL; +found: + spin_unlock(&wdm_device_list_lock); + + return desc; +} + +/* --- callbacks --- */ +static void wdm_out_callback(struct urb *urb) +{ + struct wdm_device *desc; + unsigned long flags; + + desc = urb->context; + spin_lock_irqsave(&desc->iuspin, flags); + desc->werr = urb->status; + spin_unlock_irqrestore(&desc->iuspin, flags); + kfree(desc->outbuf); + desc->outbuf = NULL; + clear_bit(WDM_IN_USE, &desc->flags); + wake_up_all(&desc->wait); +} + +static void wdm_in_callback(struct urb *urb) +{ + unsigned long flags; + struct wdm_device *desc = urb->context; + int status = urb->status; + int length = urb->actual_length; + + spin_lock_irqsave(&desc->iuspin, flags); + clear_bit(WDM_RESPONDING, &desc->flags); + + if (status) { + switch (status) { + case -ENOENT: + dev_dbg(&desc->intf->dev, + "nonzero urb status received: -ENOENT\n"); + goto skip_error; + case -ECONNRESET: + dev_dbg(&desc->intf->dev, + "nonzero urb status received: -ECONNRESET\n"); + goto skip_error; + case -ESHUTDOWN: + dev_dbg(&desc->intf->dev, + "nonzero urb status received: -ESHUTDOWN\n"); + goto skip_error; + case -EPIPE: + dev_err(&desc->intf->dev, + "nonzero urb status received: -EPIPE\n"); + break; + default: + dev_err(&desc->intf->dev, + "Unexpected error %d\n", status); + break; + } + } + + /* + * only set a new error if there is no previous error. + * Errors are only cleared during read/open + * Avoid propagating -EPIPE (stall) to userspace since it is + * better handled as an empty read + */ + if (desc->rerr == 0 && status != -EPIPE) + desc->rerr = status; + + if (length + desc->length > desc->wMaxCommand) { + /* The buffer would overflow */ + set_bit(WDM_OVERFLOW, &desc->flags); + } else { + /* we may already be in overflow */ + if (!test_bit(WDM_OVERFLOW, &desc->flags)) { + memmove(desc->ubuf + desc->length, desc->inbuf, length); + desc->length += length; + desc->reslength = length; + } + } +skip_error: + + if (desc->rerr) { + /* + * Since there was an error, userspace may decide to not read + * any data after poll'ing. + * We should respond to further attempts from the device to send + * data, so that we can get unstuck. + */ + schedule_work(&desc->service_outs_intr); + } else { + set_bit(WDM_READ, &desc->flags); + wake_up(&desc->wait); + } + spin_unlock_irqrestore(&desc->iuspin, flags); +} + +static void wdm_int_callback(struct urb *urb) +{ + unsigned long flags; + int rv = 0; + int responding; + int status = urb->status; + struct wdm_device *desc; + struct usb_cdc_notification *dr; + + desc = urb->context; + dr = (struct usb_cdc_notification *)desc->sbuf; + + if (status) { + switch (status) { + case -ESHUTDOWN: + case -ENOENT: + case -ECONNRESET: + return; /* unplug */ + case -EPIPE: + set_bit(WDM_INT_STALL, &desc->flags); + dev_err(&desc->intf->dev, "Stall on int endpoint\n"); + goto sw; /* halt is cleared in work */ + default: + dev_err(&desc->intf->dev, + "nonzero urb status received: %d\n", status); + break; + } + } + + if (urb->actual_length < sizeof(struct usb_cdc_notification)) { + dev_err(&desc->intf->dev, "wdm_int_callback - %d bytes\n", + urb->actual_length); + goto exit; + } + + switch (dr->bNotificationType) { + case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: + dev_dbg(&desc->intf->dev, + "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d\n", + le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength)); + break; + + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + + dev_dbg(&desc->intf->dev, + "NOTIFY_NETWORK_CONNECTION %s network\n", + dr->wValue ? "connected to" : "disconnected from"); + goto exit; + case USB_CDC_NOTIFY_SPEED_CHANGE: + dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)\n", + urb->actual_length); + goto exit; + default: + clear_bit(WDM_POLL_RUNNING, &desc->flags); + dev_err(&desc->intf->dev, + "unknown notification %d received: index %d len %d\n", + dr->bNotificationType, + le16_to_cpu(dr->wIndex), + le16_to_cpu(dr->wLength)); + goto exit; + } + + spin_lock_irqsave(&desc->iuspin, flags); + responding = test_and_set_bit(WDM_RESPONDING, &desc->flags); + if (!desc->resp_count++ && !responding + && !test_bit(WDM_DISCONNECTING, &desc->flags) + && !test_bit(WDM_SUSPENDING, &desc->flags)) { + rv = usb_submit_urb(desc->response, GFP_ATOMIC); + dev_dbg(&desc->intf->dev, "submit response URB %d\n", rv); + } + spin_unlock_irqrestore(&desc->iuspin, flags); + if (rv < 0) { + clear_bit(WDM_RESPONDING, &desc->flags); + if (rv == -EPERM) + return; + if (rv == -ENOMEM) { +sw: + rv = schedule_work(&desc->rxwork); + if (rv) + dev_err(&desc->intf->dev, + "Cannot schedule work\n"); + } + } +exit: + rv = usb_submit_urb(urb, GFP_ATOMIC); + if (rv) + dev_err(&desc->intf->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, rv); + +} + +static void poison_urbs(struct wdm_device *desc) +{ + /* the order here is essential */ + usb_poison_urb(desc->command); + usb_poison_urb(desc->validity); + usb_poison_urb(desc->response); +} + +static void unpoison_urbs(struct wdm_device *desc) +{ + /* + * the order here is not essential + * it is symmetrical just to be nice + */ + usb_unpoison_urb(desc->response); + usb_unpoison_urb(desc->validity); + usb_unpoison_urb(desc->command); +} + +static void free_urbs(struct wdm_device *desc) +{ + usb_free_urb(desc->validity); + usb_free_urb(desc->response); + usb_free_urb(desc->command); +} + +static void cleanup(struct wdm_device *desc) +{ + kfree(desc->sbuf); + kfree(desc->inbuf); + kfree(desc->orq); + kfree(desc->irq); + kfree(desc->ubuf); + free_urbs(desc); + kfree(desc); +} + +static ssize_t wdm_write +(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) +{ + u8 *buf; + int rv = -EMSGSIZE, r, we; + struct wdm_device *desc = file->private_data; + struct usb_ctrlrequest *req; + + if (count > desc->wMaxCommand) + count = desc->wMaxCommand; + + spin_lock_irq(&desc->iuspin); + we = desc->werr; + desc->werr = 0; + spin_unlock_irq(&desc->iuspin); + if (we < 0) + return usb_translate_errors(we); + + buf = memdup_user(buffer, count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + /* concurrent writes and disconnect */ + r = mutex_lock_interruptible(&desc->wlock); + rv = -ERESTARTSYS; + if (r) + goto out_free_mem; + + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + rv = -ENODEV; + goto out_free_mem_lock; + } + + r = usb_autopm_get_interface(desc->intf); + if (r < 0) { + rv = usb_translate_errors(r); + goto out_free_mem_lock; + } + + if (!(file->f_flags & O_NONBLOCK)) + r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE, + &desc->flags)); + else + if (test_bit(WDM_IN_USE, &desc->flags)) + r = -EAGAIN; + + if (test_bit(WDM_RESETTING, &desc->flags)) + r = -EIO; + + if (test_bit(WDM_DISCONNECTING, &desc->flags)) + r = -ENODEV; + + if (r < 0) { + rv = r; + goto out_free_mem_pm; + } + + req = desc->orq; + usb_fill_control_urb( + desc->command, + interface_to_usbdev(desc->intf), + /* using common endpoint 0 */ + usb_sndctrlpipe(interface_to_usbdev(desc->intf), 0), + (unsigned char *)req, + buf, + count, + wdm_out_callback, + desc + ); + + req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE); + req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; + req->wValue = 0; + req->wIndex = desc->inum; /* already converted */ + req->wLength = cpu_to_le16(count); + set_bit(WDM_IN_USE, &desc->flags); + desc->outbuf = buf; + + rv = usb_submit_urb(desc->command, GFP_KERNEL); + if (rv < 0) { + desc->outbuf = NULL; + clear_bit(WDM_IN_USE, &desc->flags); + wake_up_all(&desc->wait); /* for wdm_wait_for_response() */ + dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); + rv = usb_translate_errors(rv); + goto out_free_mem_pm; + } else { + dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d\n", + le16_to_cpu(req->wIndex)); + } + + usb_autopm_put_interface(desc->intf); + mutex_unlock(&desc->wlock); + return count; + +out_free_mem_pm: + usb_autopm_put_interface(desc->intf); +out_free_mem_lock: + mutex_unlock(&desc->wlock); +out_free_mem: + kfree(buf); + return rv; +} + +/* + * Submit the read urb if resp_count is non-zero. + * + * Called with desc->iuspin locked + */ +static int service_outstanding_interrupt(struct wdm_device *desc) +{ + int rv = 0; + + /* submit read urb only if the device is waiting for it */ + if (!desc->resp_count || !--desc->resp_count) + goto out; + + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + rv = -ENODEV; + goto out; + } + if (test_bit(WDM_RESETTING, &desc->flags)) { + rv = -EIO; + goto out; + } + + set_bit(WDM_RESPONDING, &desc->flags); + spin_unlock_irq(&desc->iuspin); + rv = usb_submit_urb(desc->response, GFP_KERNEL); + spin_lock_irq(&desc->iuspin); + if (rv) { + if (!test_bit(WDM_DISCONNECTING, &desc->flags)) + dev_err(&desc->intf->dev, + "usb_submit_urb failed with result %d\n", rv); + + /* make sure the next notification trigger a submit */ + clear_bit(WDM_RESPONDING, &desc->flags); + desc->resp_count = 0; + } +out: + return rv; +} + +static ssize_t wdm_read +(struct file *file, char __user *buffer, size_t count, loff_t *ppos) +{ + int rv, cntr; + int i = 0; + struct wdm_device *desc = file->private_data; + + + rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */ + if (rv < 0) + return -ERESTARTSYS; + + cntr = READ_ONCE(desc->length); + if (cntr == 0) { + desc->read = 0; +retry: + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + rv = -ENODEV; + goto err; + } + if (test_bit(WDM_OVERFLOW, &desc->flags)) { + clear_bit(WDM_OVERFLOW, &desc->flags); + rv = -ENOBUFS; + goto err; + } + i++; + if (file->f_flags & O_NONBLOCK) { + if (!test_bit(WDM_READ, &desc->flags)) { + rv = -EAGAIN; + goto err; + } + rv = 0; + } else { + rv = wait_event_interruptible(desc->wait, + test_bit(WDM_READ, &desc->flags)); + } + + /* may have happened while we slept */ + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + rv = -ENODEV; + goto err; + } + if (test_bit(WDM_RESETTING, &desc->flags)) { + rv = -EIO; + goto err; + } + usb_mark_last_busy(interface_to_usbdev(desc->intf)); + if (rv < 0) { + rv = -ERESTARTSYS; + goto err; + } + + spin_lock_irq(&desc->iuspin); + + if (desc->rerr) { /* read completed, error happened */ + rv = usb_translate_errors(desc->rerr); + desc->rerr = 0; + spin_unlock_irq(&desc->iuspin); + goto err; + } + /* + * recheck whether we've lost the race + * against the completion handler + */ + if (!test_bit(WDM_READ, &desc->flags)) { /* lost race */ + spin_unlock_irq(&desc->iuspin); + goto retry; + } + + if (!desc->reslength) { /* zero length read */ + dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n"); + clear_bit(WDM_READ, &desc->flags); + rv = service_outstanding_interrupt(desc); + spin_unlock_irq(&desc->iuspin); + if (rv < 0) + goto err; + goto retry; + } + cntr = desc->length; + spin_unlock_irq(&desc->iuspin); + } + + if (cntr > count) + cntr = count; + rv = copy_to_user(buffer, desc->ubuf, cntr); + if (rv > 0) { + rv = -EFAULT; + goto err; + } + + spin_lock_irq(&desc->iuspin); + + for (i = 0; i < desc->length - cntr; i++) + desc->ubuf[i] = desc->ubuf[i + cntr]; + + desc->length -= cntr; + /* in case we had outstanding data */ + if (!desc->length) { + clear_bit(WDM_READ, &desc->flags); + service_outstanding_interrupt(desc); + } + spin_unlock_irq(&desc->iuspin); + rv = cntr; + +err: + mutex_unlock(&desc->rlock); + return rv; +} + +static int wdm_wait_for_response(struct file *file, long timeout) +{ + struct wdm_device *desc = file->private_data; + long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */ + + /* + * Needs both flags. We cannot do with one because resetting it would + * cause a race with write() yet we need to signal a disconnect. + */ + rv = wait_event_interruptible_timeout(desc->wait, + !test_bit(WDM_IN_USE, &desc->flags) || + test_bit(WDM_DISCONNECTING, &desc->flags), + timeout); + + /* + * To report the correct error. This is best effort. + * We are inevitably racing with the hardware. + */ + if (test_bit(WDM_DISCONNECTING, &desc->flags)) + return -ENODEV; + if (!rv) + return -EIO; + if (rv < 0) + return -EINTR; + + spin_lock_irq(&desc->iuspin); + rv = desc->werr; + desc->werr = 0; + spin_unlock_irq(&desc->iuspin); + + return usb_translate_errors(rv); + +} + +/* + * You need to send a signal when you react to malicious or defective hardware. + * Also, don't abort when fsync() returned -EINVAL, for older kernels which do + * not implement wdm_flush() will return -EINVAL. + */ +static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync) +{ + return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT); +} + +/* + * Same with wdm_fsync(), except it uses finite timeout in order to react to + * malicious or defective hardware which ceased communication after close() was + * implicitly called due to process termination. + */ +static int wdm_flush(struct file *file, fl_owner_t id) +{ + return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT); +} + +static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait) +{ + struct wdm_device *desc = file->private_data; + unsigned long flags; + __poll_t mask = 0; + + spin_lock_irqsave(&desc->iuspin, flags); + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + mask = EPOLLHUP | EPOLLERR; + spin_unlock_irqrestore(&desc->iuspin, flags); + goto desc_out; + } + if (test_bit(WDM_READ, &desc->flags)) + mask = EPOLLIN | EPOLLRDNORM; + if (desc->rerr || desc->werr) + mask |= EPOLLERR; + if (!test_bit(WDM_IN_USE, &desc->flags)) + mask |= EPOLLOUT | EPOLLWRNORM; + spin_unlock_irqrestore(&desc->iuspin, flags); + + poll_wait(file, &desc->wait, wait); + +desc_out: + return mask; +} + +static int wdm_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + int rv = -ENODEV; + struct usb_interface *intf; + struct wdm_device *desc; + + mutex_lock(&wdm_mutex); + desc = wdm_find_device_by_minor(minor); + if (!desc) + goto out; + + intf = desc->intf; + if (test_bit(WDM_DISCONNECTING, &desc->flags)) + goto out; + file->private_data = desc; + + rv = usb_autopm_get_interface(desc->intf); + if (rv < 0) { + dev_err(&desc->intf->dev, "Error autopm - %d\n", rv); + goto out; + } + + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); + if (!desc->count++) { + desc->werr = 0; + desc->rerr = 0; + rv = usb_submit_urb(desc->validity, GFP_KERNEL); + if (rv < 0) { + desc->count--; + dev_err(&desc->intf->dev, + "Error submitting int urb - %d\n", rv); + rv = usb_translate_errors(rv); + } + } else { + rv = 0; + } + mutex_unlock(&desc->wlock); + if (desc->count == 1) + desc->manage_power(intf, 1); + usb_autopm_put_interface(desc->intf); +out: + mutex_unlock(&wdm_mutex); + return rv; +} + +static int wdm_release(struct inode *inode, struct file *file) +{ + struct wdm_device *desc = file->private_data; + + mutex_lock(&wdm_mutex); + + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); + desc->count--; + mutex_unlock(&desc->wlock); + + if (!desc->count) { + if (!test_bit(WDM_DISCONNECTING, &desc->flags)) { + dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n"); + poison_urbs(desc); + spin_lock_irq(&desc->iuspin); + desc->resp_count = 0; + clear_bit(WDM_RESPONDING, &desc->flags); + spin_unlock_irq(&desc->iuspin); + desc->manage_power(desc->intf, 0); + unpoison_urbs(desc); + } else { + /* must avoid dev_printk here as desc->intf is invalid */ + pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__); + cleanup(desc); + } + } + mutex_unlock(&wdm_mutex); + return 0; +} + +static long wdm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct wdm_device *desc = file->private_data; + int rv = 0; + + switch (cmd) { + case IOCTL_WDM_MAX_COMMAND: + if (copy_to_user((void __user *)arg, &desc->wMaxCommand, sizeof(desc->wMaxCommand))) + rv = -EFAULT; + break; + default: + rv = -ENOTTY; + } + return rv; +} + +static const struct file_operations wdm_fops = { + .owner = THIS_MODULE, + .read = wdm_read, + .write = wdm_write, + .fsync = wdm_fsync, + .open = wdm_open, + .flush = wdm_flush, + .release = wdm_release, + .poll = wdm_poll, + .unlocked_ioctl = wdm_ioctl, + .compat_ioctl = wdm_ioctl, + .llseek = noop_llseek, +}; + +static struct usb_class_driver wdm_class = { + .name = "cdc-wdm%d", + .fops = &wdm_fops, + .minor_base = WDM_MINOR_BASE, +}; + +/* --- error handling --- */ +static void wdm_rxwork(struct work_struct *work) +{ + struct wdm_device *desc = container_of(work, struct wdm_device, rxwork); + unsigned long flags; + int rv = 0; + int responding; + + spin_lock_irqsave(&desc->iuspin, flags); + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + spin_unlock_irqrestore(&desc->iuspin, flags); + } else { + responding = test_and_set_bit(WDM_RESPONDING, &desc->flags); + spin_unlock_irqrestore(&desc->iuspin, flags); + if (!responding) + rv = usb_submit_urb(desc->response, GFP_KERNEL); + if (rv < 0 && rv != -EPERM) { + spin_lock_irqsave(&desc->iuspin, flags); + clear_bit(WDM_RESPONDING, &desc->flags); + if (!test_bit(WDM_DISCONNECTING, &desc->flags)) + schedule_work(&desc->rxwork); + spin_unlock_irqrestore(&desc->iuspin, flags); + } + } +} + +static void service_interrupt_work(struct work_struct *work) +{ + struct wdm_device *desc; + + desc = container_of(work, struct wdm_device, service_outs_intr); + + spin_lock_irq(&desc->iuspin); + service_outstanding_interrupt(desc); + if (!desc->resp_count) { + set_bit(WDM_READ, &desc->flags); + wake_up(&desc->wait); + } + spin_unlock_irq(&desc->iuspin); +} + +/* --- hotplug --- */ + +static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep, + u16 bufsize, int (*manage_power)(struct usb_interface *, int)) +{ + int rv = -ENOMEM; + struct wdm_device *desc; + + desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL); + if (!desc) + goto out; + INIT_LIST_HEAD(&desc->device_list); + mutex_init(&desc->rlock); + mutex_init(&desc->wlock); + spin_lock_init(&desc->iuspin); + init_waitqueue_head(&desc->wait); + desc->wMaxCommand = bufsize; + /* this will be expanded and needed in hardware endianness */ + desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber); + desc->intf = intf; + INIT_WORK(&desc->rxwork, wdm_rxwork); + INIT_WORK(&desc->service_outs_intr, service_interrupt_work); + + rv = -EINVAL; + if (!usb_endpoint_is_int_in(ep)) + goto err; + + desc->wMaxPacketSize = usb_endpoint_maxp(ep); + + desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!desc->orq) + goto err; + desc->irq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!desc->irq) + goto err; + + desc->validity = usb_alloc_urb(0, GFP_KERNEL); + if (!desc->validity) + goto err; + + desc->response = usb_alloc_urb(0, GFP_KERNEL); + if (!desc->response) + goto err; + + desc->command = usb_alloc_urb(0, GFP_KERNEL); + if (!desc->command) + goto err; + + desc->ubuf = kmalloc(desc->wMaxCommand, GFP_KERNEL); + if (!desc->ubuf) + goto err; + + desc->sbuf = kmalloc(desc->wMaxPacketSize, GFP_KERNEL); + if (!desc->sbuf) + goto err; + + desc->inbuf = kmalloc(desc->wMaxCommand, GFP_KERNEL); + if (!desc->inbuf) + goto err; + + usb_fill_int_urb( + desc->validity, + interface_to_usbdev(intf), + usb_rcvintpipe(interface_to_usbdev(intf), ep->bEndpointAddress), + desc->sbuf, + desc->wMaxPacketSize, + wdm_int_callback, + desc, + ep->bInterval + ); + + desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE); + desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; + desc->irq->wValue = 0; + desc->irq->wIndex = desc->inum; /* already converted */ + desc->irq->wLength = cpu_to_le16(desc->wMaxCommand); + + usb_fill_control_urb( + desc->response, + interface_to_usbdev(intf), + /* using common endpoint 0 */ + usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0), + (unsigned char *)desc->irq, + desc->inbuf, + desc->wMaxCommand, + wdm_in_callback, + desc + ); + + desc->manage_power = manage_power; + + spin_lock(&wdm_device_list_lock); + list_add(&desc->device_list, &wdm_device_list); + spin_unlock(&wdm_device_list_lock); + + rv = usb_register_dev(intf, &wdm_class); + if (rv < 0) + goto err; + else + dev_info(&intf->dev, "%s: USB WDM device\n", dev_name(intf->usb_dev)); +out: + return rv; +err: + spin_lock(&wdm_device_list_lock); + list_del(&desc->device_list); + spin_unlock(&wdm_device_list_lock); + cleanup(desc); + return rv; +} + +static int wdm_manage_power(struct usb_interface *intf, int on) +{ + /* need autopm_get/put here to ensure the usbcore sees the new value */ + int rv = usb_autopm_get_interface(intf); + + intf->needs_remote_wakeup = on; + if (!rv) + usb_autopm_put_interface(intf); + return 0; +} + +static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int rv = -EINVAL; + struct usb_host_interface *iface; + struct usb_endpoint_descriptor *ep; + struct usb_cdc_parsed_header hdr; + u8 *buffer = intf->altsetting->extra; + int buflen = intf->altsetting->extralen; + u16 maxcom = WDM_DEFAULT_BUFSIZE; + + if (!buffer) + goto err; + + cdc_parse_cdc_header(&hdr, intf, buffer, buflen); + + if (hdr.usb_cdc_dmm_desc) + maxcom = le16_to_cpu(hdr.usb_cdc_dmm_desc->wMaxCommand); + + iface = intf->cur_altsetting; + if (iface->desc.bNumEndpoints != 1) + goto err; + ep = &iface->endpoint[0].desc; + + rv = wdm_create(intf, ep, maxcom, &wdm_manage_power); + +err: + return rv; +} + +/** + * usb_cdc_wdm_register - register a WDM subdriver + * @intf: usb interface the subdriver will associate with + * @ep: interrupt endpoint to monitor for notifications + * @bufsize: maximum message size to support for read/write + * + * Create WDM usb class character device and associate it with intf + * without binding, allowing another driver to manage the interface. + * + * The subdriver will manage the given interrupt endpoint exclusively + * and will issue control requests referring to the given intf. It + * will otherwise avoid interferring, and in particular not do + * usb_set_intfdata/usb_get_intfdata on intf. + * + * The return value is a pointer to the subdriver's struct usb_driver. + * The registering driver is responsible for calling this subdriver's + * disconnect, suspend, resume, pre_reset and post_reset methods from + * its own. + */ +struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf, + struct usb_endpoint_descriptor *ep, + int bufsize, + int (*manage_power)(struct usb_interface *, int)) +{ + int rv = -EINVAL; + + rv = wdm_create(intf, ep, bufsize, manage_power); + if (rv < 0) + goto err; + + return &wdm_driver; +err: + return ERR_PTR(rv); +} +EXPORT_SYMBOL(usb_cdc_wdm_register); + +static void wdm_disconnect(struct usb_interface *intf) +{ + struct wdm_device *desc; + unsigned long flags; + + usb_deregister_dev(intf, &wdm_class); + desc = wdm_find_device(intf); + mutex_lock(&wdm_mutex); + + /* the spinlock makes sure no new urbs are generated in the callbacks */ + spin_lock_irqsave(&desc->iuspin, flags); + set_bit(WDM_DISCONNECTING, &desc->flags); + set_bit(WDM_READ, &desc->flags); + spin_unlock_irqrestore(&desc->iuspin, flags); + wake_up_all(&desc->wait); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + poison_urbs(desc); + cancel_work_sync(&desc->rxwork); + cancel_work_sync(&desc->service_outs_intr); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); + + /* the desc->intf pointer used as list key is now invalid */ + spin_lock(&wdm_device_list_lock); + list_del(&desc->device_list); + spin_unlock(&wdm_device_list_lock); + + if (!desc->count) + cleanup(desc); + else + dev_dbg(&intf->dev, "%d open files - postponing cleanup\n", desc->count); + mutex_unlock(&wdm_mutex); +} + +#ifdef CONFIG_PM +static int wdm_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct wdm_device *desc = wdm_find_device(intf); + int rv = 0; + + dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor); + + /* if this is an autosuspend the caller does the locking */ + if (!PMSG_IS_AUTO(message)) { + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + } + spin_lock_irq(&desc->iuspin); + + if (PMSG_IS_AUTO(message) && + (test_bit(WDM_IN_USE, &desc->flags) + || test_bit(WDM_RESPONDING, &desc->flags))) { + spin_unlock_irq(&desc->iuspin); + rv = -EBUSY; + } else { + + set_bit(WDM_SUSPENDING, &desc->flags); + spin_unlock_irq(&desc->iuspin); + /* callback submits work - order is essential */ + poison_urbs(desc); + cancel_work_sync(&desc->rxwork); + cancel_work_sync(&desc->service_outs_intr); + unpoison_urbs(desc); + } + if (!PMSG_IS_AUTO(message)) { + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); + } + + return rv; +} +#endif + +static int recover_from_urb_loss(struct wdm_device *desc) +{ + int rv = 0; + + if (desc->count) { + rv = usb_submit_urb(desc->validity, GFP_NOIO); + if (rv < 0) + dev_err(&desc->intf->dev, + "Error resume submitting int urb - %d\n", rv); + } + return rv; +} + +#ifdef CONFIG_PM +static int wdm_resume(struct usb_interface *intf) +{ + struct wdm_device *desc = wdm_find_device(intf); + int rv; + + dev_dbg(&desc->intf->dev, "wdm%d_resume\n", intf->minor); + + clear_bit(WDM_SUSPENDING, &desc->flags); + rv = recover_from_urb_loss(desc); + + return rv; +} +#endif + +static int wdm_pre_reset(struct usb_interface *intf) +{ + struct wdm_device *desc = wdm_find_device(intf); + + /* + * we notify everybody using poll of + * an exceptional situation + * must be done before recovery lest a spontaneous + * message from the device is lost + */ + spin_lock_irq(&desc->iuspin); + set_bit(WDM_RESETTING, &desc->flags); /* inform read/write */ + set_bit(WDM_READ, &desc->flags); /* unblock read */ + clear_bit(WDM_IN_USE, &desc->flags); /* unblock write */ + desc->rerr = -EINTR; + spin_unlock_irq(&desc->iuspin); + wake_up_all(&desc->wait); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + poison_urbs(desc); + cancel_work_sync(&desc->rxwork); + cancel_work_sync(&desc->service_outs_intr); + return 0; +} + +static int wdm_post_reset(struct usb_interface *intf) +{ + struct wdm_device *desc = wdm_find_device(intf); + int rv; + + unpoison_urbs(desc); + clear_bit(WDM_OVERFLOW, &desc->flags); + clear_bit(WDM_RESETTING, &desc->flags); + rv = recover_from_urb_loss(desc); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); + return rv; +} + +static struct usb_driver wdm_driver = { + .name = "cdc_wdm", + .probe = wdm_probe, + .disconnect = wdm_disconnect, +#ifdef CONFIG_PM + .suspend = wdm_suspend, + .resume = wdm_resume, + .reset_resume = wdm_resume, +#endif + .pre_reset = wdm_pre_reset, + .post_reset = wdm_post_reset, + .id_table = wdm_ids, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(wdm_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c new file mode 100644 index 000000000..5edf52a6e --- /dev/null +++ b/drivers/usb/class/usblp.c @@ -0,0 +1,1473 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * usblp.c + * + * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com> + * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> + * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net> + * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> + # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com> + # Copyright (c) 2001 David Paschal <paschal@rcsis.com> + * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name> + * + * USB Printer Device Class driver for USB printers and printer cables + * + * Sponsored by SuSE + * + * ChangeLog: + * v0.1 - thorough cleaning, URBification, almost a rewrite + * v0.2 - some more cleanups + * v0.3 - cleaner again, waitqueue fixes + * v0.4 - fixes in unidirectional mode + * v0.5 - add DEVICE_ID string support + * v0.6 - never time out + * v0.7 - fixed bulk-IN read and poll (David Paschal) + * v0.8 - add devfs support + * v0.9 - fix unplug-while-open paths + * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org) + * v0.11 - add proto_bias option (Pete Zaitcev) + * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal) + * v0.13 - alloc space for statusbuf (<status> not on stack); + * use usb_alloc_coherent() for read buf & write buf; + * none - Maintained in Linux kernel after v0.13 + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched/signal.h> +#include <linux/signal.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/lp.h> +#include <linux/mutex.h> +#undef DEBUG +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/ratelimit.h> + +/* + * Version Information + */ +#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal" +#define DRIVER_DESC "USB Printer Device Class driver" + +#define USBLP_BUF_SIZE 8192 +#define USBLP_BUF_SIZE_IN 1024 +#define USBLP_DEVICE_ID_SIZE 1024 + +/* ioctls: */ +#define IOCNR_GET_DEVICE_ID 1 +#define IOCNR_GET_PROTOCOLS 2 +#define IOCNR_SET_PROTOCOL 3 +#define IOCNR_HP_SET_CHANNEL 4 +#define IOCNR_GET_BUS_ADDRESS 5 +#define IOCNR_GET_VID_PID 6 +#define IOCNR_SOFT_RESET 7 +/* Get device_id string: */ +#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len) +/* The following ioctls were added for http://hpoj.sourceforge.net: + * Get two-int array: + * [0]=current protocol + * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, + * 3=USB_CLASS_PRINTER/1/3), + * [1]=supported protocol mask (mask&(1<<n)!=0 means + * USB_CLASS_PRINTER/1/n supported): + */ +#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len) +/* + * Set protocol + * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, + * 3=USB_CLASS_PRINTER/1/3): + */ +#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0) +/* Set channel number (HP Vendor-specific command): */ +#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0) +/* Get two-int array: [0]=bus number, [1]=device address: */ +#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len) +/* Get two-int array: [0]=vendor ID, [1]=product ID: */ +#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len) +/* Perform class specific soft reset */ +#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0); + +/* + * A DEVICE_ID string may include the printer's serial number. + * It should end with a semi-colon (';'). + * An example from an HP 970C DeskJet printer is (this is one long string, + * with the serial number changed): +MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ; + */ + +/* + * USB Printer Requests + */ + +#define USBLP_REQ_GET_ID 0x00 +#define USBLP_REQ_GET_STATUS 0x01 +#define USBLP_REQ_RESET 0x02 +#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */ + +#define USBLP_MINORS 16 +#define USBLP_MINOR_BASE 0 + +#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */ + +#define USBLP_FIRST_PROTOCOL 1 +#define USBLP_LAST_PROTOCOL 3 +#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1) + +/* + * some arbitrary status buffer size; + * need a status buffer that is allocated via kmalloc(), not on stack + */ +#define STATUS_BUF_SIZE 8 + +/* + * Locks down the locking order: + * ->wmut locks wstatus. + * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection, + * [rw]status. We only touch status when we know the side idle. + * ->lock locks what interrupt accesses. + */ +struct usblp { + struct usb_device *dev; /* USB device */ + struct mutex wmut; + struct mutex mut; + spinlock_t lock; /* locks rcomplete, wcomplete */ + char *readbuf; /* read transfer_buffer */ + char *statusbuf; /* status transfer_buffer */ + struct usb_anchor urbs; + wait_queue_head_t rwait, wwait; + int readcount; /* Counter for reads */ + int ifnum; /* Interface number */ + struct usb_interface *intf; /* The interface */ + /* + * Alternate-setting numbers and endpoints for each protocol + * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports: + */ + struct { + int alt_setting; + struct usb_endpoint_descriptor *epwrite; + struct usb_endpoint_descriptor *epread; + } protocol[USBLP_MAX_PROTOCOLS]; + int current_protocol; + int minor; /* minor number of device */ + int wcomplete, rcomplete; + int wstatus; /* bytes written or error */ + int rstatus; /* bytes ready or error */ + unsigned int quirks; /* quirks flags */ + unsigned int flags; /* mode flags */ + unsigned char used; /* True if open */ + unsigned char present; /* True if not disconnected */ + unsigned char bidir; /* interface is bidirectional */ + unsigned char no_paper; /* Paper Out happened */ + unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */ + /* first 2 bytes are (big-endian) length */ +}; + +#ifdef DEBUG +static void usblp_dump(struct usblp *usblp) +{ + struct device *dev = &usblp->intf->dev; + int p; + + dev_dbg(dev, "usblp=0x%p\n", usblp); + dev_dbg(dev, "dev=0x%p\n", usblp->dev); + dev_dbg(dev, "present=%d\n", usblp->present); + dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf); + dev_dbg(dev, "readcount=%d\n", usblp->readcount); + dev_dbg(dev, "ifnum=%d\n", usblp->ifnum); + for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) { + dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p, + usblp->protocol[p].alt_setting); + dev_dbg(dev, "protocol[%d].epwrite=%p\n", p, + usblp->protocol[p].epwrite); + dev_dbg(dev, "protocol[%d].epread=%p\n", p, + usblp->protocol[p].epread); + } + dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol); + dev_dbg(dev, "minor=%d\n", usblp->minor); + dev_dbg(dev, "wstatus=%d\n", usblp->wstatus); + dev_dbg(dev, "rstatus=%d\n", usblp->rstatus); + dev_dbg(dev, "quirks=%d\n", usblp->quirks); + dev_dbg(dev, "used=%d\n", usblp->used); + dev_dbg(dev, "bidir=%d\n", usblp->bidir); + dev_dbg(dev, "device_id_string=\"%s\"\n", + usblp->device_id_string ? + usblp->device_id_string + 2 : + (unsigned char *)"(null)"); +} +#endif + +/* Quirks: various printer quirks are handled by this table & its flags. */ + +struct quirk_printer_struct { + __u16 vendorId; + __u16 productId; + unsigned int quirks; +}; + +#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */ +#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */ +#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */ + +static const struct quirk_printer_struct quirk_printers[] = { + { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */ + { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */ + { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */ + { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ + { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ + { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ + { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ + { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ + { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ + { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ + { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ + { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ + { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ + { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ + { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ + { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ + { 0, 0 } +}; + +static int usblp_wwait(struct usblp *usblp, int nonblock); +static int usblp_wtest(struct usblp *usblp, int nonblock); +static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock); +static int usblp_rtest(struct usblp *usblp, int nonblock); +static int usblp_submit_read(struct usblp *usblp); +static int usblp_select_alts(struct usblp *usblp); +static int usblp_set_protocol(struct usblp *usblp, int protocol); +static int usblp_cache_device_id_string(struct usblp *usblp); + +/* forward reference to make our lives easier */ +static struct usb_driver usblp_driver; +static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */ + +/* + * Functions for usblp control messages. + */ + +static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len) +{ + int retval; + int index = usblp->ifnum; + + /* High byte has the interface index. + Low byte has the alternate setting. + */ + if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) + index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; + + retval = usb_control_msg(usblp->dev, + dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), + request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT); + dev_dbg(&usblp->intf->dev, + "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n", + request, !!dir, recip, value, index, len, retval); + return retval < 0 ? retval : 0; +} + +#define usblp_read_status(usblp, status)\ + usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1) +#define usblp_get_id(usblp, config, id, maxlen)\ + usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen) +#define usblp_reset(usblp)\ + usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0) + +static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel) +{ + u8 *buf; + int ret; + + buf = kzalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, + USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, + channel, buf, 1); + if (ret == 0) + *new_channel = buf[0]; + + kfree(buf); + + return ret; +} + +/* + * See the description for usblp_select_alts() below for the usage + * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in + * case of any trouble. + */ +static int proto_bias = -1; + +/* + * URB callback. + */ + +static void usblp_bulk_read(struct urb *urb) +{ + struct usblp *usblp = urb->context; + int status = urb->status; + unsigned long flags; + + if (usblp->present && usblp->used) { + if (status) + printk(KERN_WARNING "usblp%d: " + "nonzero read bulk status received: %d\n", + usblp->minor, status); + } + spin_lock_irqsave(&usblp->lock, flags); + if (status < 0) + usblp->rstatus = status; + else + usblp->rstatus = urb->actual_length; + usblp->rcomplete = 1; + wake_up(&usblp->rwait); + spin_unlock_irqrestore(&usblp->lock, flags); + + usb_free_urb(urb); +} + +static void usblp_bulk_write(struct urb *urb) +{ + struct usblp *usblp = urb->context; + int status = urb->status; + unsigned long flags; + + if (usblp->present && usblp->used) { + if (status) + printk(KERN_WARNING "usblp%d: " + "nonzero write bulk status received: %d\n", + usblp->minor, status); + } + spin_lock_irqsave(&usblp->lock, flags); + if (status < 0) + usblp->wstatus = status; + else + usblp->wstatus = urb->actual_length; + usblp->no_paper = 0; + usblp->wcomplete = 1; + wake_up(&usblp->wwait); + spin_unlock_irqrestore(&usblp->lock, flags); + + usb_free_urb(urb); +} + +/* + * Get and print printer errors. + */ + +static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; + +static int usblp_check_status(struct usblp *usblp, int err) +{ + unsigned char status, newerr = 0; + int error; + + mutex_lock(&usblp->mut); + if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) { + mutex_unlock(&usblp->mut); + printk_ratelimited(KERN_ERR + "usblp%d: error %d reading printer status\n", + usblp->minor, error); + return 0; + } + status = *usblp->statusbuf; + mutex_unlock(&usblp->mut); + + if (~status & LP_PERRORP) + newerr = 3; + if (status & LP_POUTPA) + newerr = 1; + if (~status & LP_PSELECD) + newerr = 2; + + if (newerr != err) { + printk(KERN_INFO "usblp%d: %s\n", + usblp->minor, usblp_messages[newerr]); + } + + return newerr; +} + +static int handle_bidir(struct usblp *usblp) +{ + if (usblp->bidir && usblp->used) { + if (usblp_submit_read(usblp) < 0) + return -EIO; + } + return 0; +} + +/* + * File op functions. + */ + +static int usblp_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct usblp *usblp; + struct usb_interface *intf; + int retval; + + if (minor < 0) + return -ENODEV; + + mutex_lock(&usblp_mutex); + + retval = -ENODEV; + intf = usb_find_interface(&usblp_driver, minor); + if (!intf) + goto out; + usblp = usb_get_intfdata(intf); + if (!usblp || !usblp->dev || !usblp->present) + goto out; + + retval = -EBUSY; + if (usblp->used) + goto out; + + /* + * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons: + * - We do not want persistent state which close(2) does not clear + * - It is not used anyway, according to CUPS people + */ + + retval = usb_autopm_get_interface(intf); + if (retval < 0) + goto out; + usblp->used = 1; + file->private_data = usblp; + + usblp->wcomplete = 1; /* we begin writeable */ + usblp->wstatus = 0; + usblp->rcomplete = 0; + + if (handle_bidir(usblp) < 0) { + usb_autopm_put_interface(intf); + usblp->used = 0; + file->private_data = NULL; + retval = -EIO; + } +out: + mutex_unlock(&usblp_mutex); + return retval; +} + +static void usblp_cleanup(struct usblp *usblp) +{ + printk(KERN_INFO "usblp%d: removed\n", usblp->minor); + + kfree(usblp->readbuf); + kfree(usblp->device_id_string); + kfree(usblp->statusbuf); + usb_put_intf(usblp->intf); + kfree(usblp); +} + +static void usblp_unlink_urbs(struct usblp *usblp) +{ + usb_kill_anchored_urbs(&usblp->urbs); +} + +static int usblp_release(struct inode *inode, struct file *file) +{ + struct usblp *usblp = file->private_data; + + usblp->flags &= ~LP_ABORT; + + mutex_lock(&usblp_mutex); + usblp->used = 0; + if (usblp->present) + usblp_unlink_urbs(usblp); + + usb_autopm_put_interface(usblp->intf); + + if (!usblp->present) /* finish cleanup from disconnect */ + usblp_cleanup(usblp); /* any URBs must be dead */ + + mutex_unlock(&usblp_mutex); + return 0; +} + +/* No kernel lock - fine */ +static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait) +{ + struct usblp *usblp = file->private_data; + __poll_t ret = 0; + unsigned long flags; + + /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */ + poll_wait(file, &usblp->rwait, wait); + poll_wait(file, &usblp->wwait, wait); + + mutex_lock(&usblp->mut); + if (!usblp->present) + ret |= EPOLLHUP; + mutex_unlock(&usblp->mut); + + spin_lock_irqsave(&usblp->lock, flags); + if (usblp->bidir && usblp->rcomplete) + ret |= EPOLLIN | EPOLLRDNORM; + if (usblp->no_paper || usblp->wcomplete) + ret |= EPOLLOUT | EPOLLWRNORM; + spin_unlock_irqrestore(&usblp->lock, flags); + return ret; +} + +static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct usblp *usblp = file->private_data; + int length, err, i; + unsigned char newChannel; + int status; + int twoints[2]; + int retval = 0; + + mutex_lock(&usblp->mut); + if (!usblp->present) { + retval = -ENODEV; + goto done; + } + + dev_dbg(&usblp->intf->dev, + "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd, + _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); + + if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ + + switch (_IOC_NR(cmd)) { + + case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ + if (_IOC_DIR(cmd) != _IOC_READ) { + retval = -EINVAL; + goto done; + } + + length = usblp_cache_device_id_string(usblp); + if (length < 0) { + retval = length; + goto done; + } + if (length > _IOC_SIZE(cmd)) + length = _IOC_SIZE(cmd); /* truncate */ + + if (copy_to_user((void __user *) arg, + usblp->device_id_string, + (unsigned long) length)) { + retval = -EFAULT; + goto done; + } + + break; + + case IOCNR_GET_PROTOCOLS: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } + + twoints[0] = usblp->current_protocol; + twoints[1] = 0; + for (i = USBLP_FIRST_PROTOCOL; + i <= USBLP_LAST_PROTOCOL; i++) { + if (usblp->protocol[i].alt_setting >= 0) + twoints[1] |= (1<<i); + } + + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } + + break; + + case IOCNR_SET_PROTOCOL: + if (_IOC_DIR(cmd) != _IOC_WRITE) { + retval = -EINVAL; + goto done; + } + +#ifdef DEBUG + if (arg == -10) { + usblp_dump(usblp); + break; + } +#endif + + usblp_unlink_urbs(usblp); + retval = usblp_set_protocol(usblp, arg); + if (retval < 0) { + usblp_set_protocol(usblp, + usblp->current_protocol); + } + break; + + case IOCNR_HP_SET_CHANNEL: + if (_IOC_DIR(cmd) != _IOC_WRITE || + le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || + usblp->quirks & USBLP_QUIRK_BIDIR) { + retval = -EINVAL; + goto done; + } + + err = usblp_hp_channel_change_request(usblp, + arg, &newChannel); + if (err < 0) { + dev_err(&usblp->dev->dev, + "usblp%d: error = %d setting " + "HP channel\n", + usblp->minor, err); + retval = -EIO; + goto done; + } + + dev_dbg(&usblp->intf->dev, + "usblp%d requested/got HP channel %ld/%d\n", + usblp->minor, arg, newChannel); + break; + + case IOCNR_GET_BUS_ADDRESS: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } + + twoints[0] = usblp->dev->bus->busnum; + twoints[1] = usblp->dev->devnum; + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } + + dev_dbg(&usblp->intf->dev, + "usblp%d is bus=%d, device=%d\n", + usblp->minor, twoints[0], twoints[1]); + break; + + case IOCNR_GET_VID_PID: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } + + twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); + twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } + + dev_dbg(&usblp->intf->dev, + "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n", + usblp->minor, twoints[0], twoints[1]); + break; + + case IOCNR_SOFT_RESET: + if (_IOC_DIR(cmd) != _IOC_NONE) { + retval = -EINVAL; + goto done; + } + retval = usblp_reset(usblp); + break; + default: + retval = -ENOTTY; + } + else /* old-style ioctl value */ + switch (cmd) { + + case LPGETSTATUS: + retval = usblp_read_status(usblp, usblp->statusbuf); + if (retval) { + printk_ratelimited(KERN_ERR "usblp%d:" + "failed reading printer status (%d)\n", + usblp->minor, retval); + retval = -EIO; + goto done; + } + status = *usblp->statusbuf; + if (copy_to_user((void __user *)arg, &status, sizeof(int))) + retval = -EFAULT; + break; + + case LPABORT: + if (arg) + usblp->flags |= LP_ABORT; + else + usblp->flags &= ~LP_ABORT; + break; + + default: + retval = -ENOTTY; + } + +done: + mutex_unlock(&usblp->mut); + return retval; +} + +static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length) +{ + struct urb *urb; + char *writebuf; + + writebuf = kmalloc(transfer_length, GFP_KERNEL); + if (writebuf == NULL) + return NULL; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) { + kfree(writebuf); + return NULL; + } + + usb_fill_bulk_urb(urb, usblp->dev, + usb_sndbulkpipe(usblp->dev, + usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress), + writebuf, transfer_length, usblp_bulk_write, usblp); + urb->transfer_flags |= URB_FREE_BUFFER; + + return urb; +} + +static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) +{ + struct usblp *usblp = file->private_data; + struct urb *writeurb; + int rv; + int transfer_length; + ssize_t writecount = 0; + + if (mutex_lock_interruptible(&usblp->wmut)) { + rv = -EINTR; + goto raise_biglock; + } + if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0) + goto raise_wait; + + while (writecount < count) { + /* + * Step 1: Submit next block. + */ + if ((transfer_length = count - writecount) > USBLP_BUF_SIZE) + transfer_length = USBLP_BUF_SIZE; + + rv = -ENOMEM; + writeurb = usblp_new_writeurb(usblp, transfer_length); + if (writeurb == NULL) + goto raise_urb; + usb_anchor_urb(writeurb, &usblp->urbs); + + if (copy_from_user(writeurb->transfer_buffer, + buffer + writecount, transfer_length)) { + rv = -EFAULT; + goto raise_badaddr; + } + + spin_lock_irq(&usblp->lock); + usblp->wcomplete = 0; + spin_unlock_irq(&usblp->lock); + if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) { + usblp->wstatus = 0; + spin_lock_irq(&usblp->lock); + usblp->no_paper = 0; + usblp->wcomplete = 1; + wake_up(&usblp->wwait); + spin_unlock_irq(&usblp->lock); + if (rv != -ENOMEM) + rv = -EIO; + goto raise_submit; + } + + /* + * Step 2: Wait for transfer to end, collect results. + */ + rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK)); + if (rv < 0) { + if (rv == -EAGAIN) { + /* Presume that it's going to complete well. */ + writecount += transfer_length; + } + if (rv == -ENOSPC) { + spin_lock_irq(&usblp->lock); + usblp->no_paper = 1; /* Mark for poll(2) */ + spin_unlock_irq(&usblp->lock); + writecount += transfer_length; + } + /* Leave URB dangling, to be cleaned on close. */ + goto collect_error; + } + + if (usblp->wstatus < 0) { + rv = -EIO; + goto collect_error; + } + /* + * This is critical: it must be our URB, not other writer's. + * The wmut exists mainly to cover us here. + */ + writecount += usblp->wstatus; + } + + mutex_unlock(&usblp->wmut); + return writecount; + +raise_submit: +raise_badaddr: + usb_unanchor_urb(writeurb); + usb_free_urb(writeurb); +raise_urb: +raise_wait: +collect_error: /* Out of raise sequence */ + mutex_unlock(&usblp->wmut); +raise_biglock: + return writecount ? writecount : rv; +} + +/* + * Notice that we fail to restart in a few cases: on EFAULT, on restart + * error, etc. This is the historical behaviour. In all such cases we return + * EIO, and applications loop in order to get the new read going. + */ +static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos) +{ + struct usblp *usblp = file->private_data; + ssize_t count; + ssize_t avail; + int rv; + + if (!usblp->bidir) + return -EINVAL; + + rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK)); + if (rv < 0) + return rv; + + if (!usblp->present) { + count = -ENODEV; + goto done; + } + + if ((avail = usblp->rstatus) < 0) { + printk(KERN_ERR "usblp%d: error %d reading from printer\n", + usblp->minor, (int)avail); + usblp_submit_read(usblp); + count = -EIO; + goto done; + } + + count = len < avail - usblp->readcount ? len : avail - usblp->readcount; + if (count != 0 && + copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) { + count = -EFAULT; + goto done; + } + + if ((usblp->readcount += count) == avail) { + if (usblp_submit_read(usblp) < 0) { + /* We don't want to leak USB return codes into errno. */ + if (count == 0) + count = -EIO; + goto done; + } + } + +done: + mutex_unlock(&usblp->mut); + return count; +} + +/* + * Wait for the write path to come idle. + * This is called under the ->wmut, so the idle path stays idle. + * + * Our write path has a peculiar property: it does not buffer like a tty, + * but waits for the write to succeed. This allows our ->release to bug out + * without waiting for writes to drain. But it obviously does not work + * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use + * select(2) or poll(2) to wait for the buffer to drain before closing. + * Alternatively, set blocking mode with fcntl and issue a zero-size write. + */ +static int usblp_wwait(struct usblp *usblp, int nonblock) +{ + DECLARE_WAITQUEUE(waita, current); + int rc; + int err = 0; + + add_wait_queue(&usblp->wwait, &waita); + for (;;) { + if (mutex_lock_interruptible(&usblp->mut)) { + rc = -EINTR; + break; + } + set_current_state(TASK_INTERRUPTIBLE); + rc = usblp_wtest(usblp, nonblock); + mutex_unlock(&usblp->mut); + if (rc <= 0) + break; + + if (schedule_timeout(msecs_to_jiffies(1500)) == 0) { + if (usblp->flags & LP_ABORT) { + err = usblp_check_status(usblp, err); + if (err == 1) { /* Paper out */ + rc = -ENOSPC; + break; + } + } else { + /* Prod the printer, Gentoo#251237. */ + mutex_lock(&usblp->mut); + usblp_read_status(usblp, usblp->statusbuf); + mutex_unlock(&usblp->mut); + } + } + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&usblp->wwait, &waita); + return rc; +} + +static int usblp_wtest(struct usblp *usblp, int nonblock) +{ + unsigned long flags; + + if (!usblp->present) + return -ENODEV; + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&usblp->lock, flags); + if (usblp->wcomplete) { + spin_unlock_irqrestore(&usblp->lock, flags); + return 0; + } + spin_unlock_irqrestore(&usblp->lock, flags); + if (nonblock) + return -EAGAIN; + return 1; +} + +/* + * Wait for read bytes to become available. This probably should have been + * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional + * name for functions which lock and return. + * + * We do not use wait_event_interruptible because it makes locking iffy. + */ +static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock) +{ + DECLARE_WAITQUEUE(waita, current); + int rc; + + add_wait_queue(&usblp->rwait, &waita); + for (;;) { + if (mutex_lock_interruptible(&usblp->mut)) { + rc = -EINTR; + break; + } + set_current_state(TASK_INTERRUPTIBLE); + if ((rc = usblp_rtest(usblp, nonblock)) < 0) { + mutex_unlock(&usblp->mut); + break; + } + if (rc == 0) /* Keep it locked */ + break; + mutex_unlock(&usblp->mut); + schedule(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&usblp->rwait, &waita); + return rc; +} + +static int usblp_rtest(struct usblp *usblp, int nonblock) +{ + unsigned long flags; + + if (!usblp->present) + return -ENODEV; + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&usblp->lock, flags); + if (usblp->rcomplete) { + spin_unlock_irqrestore(&usblp->lock, flags); + return 0; + } + spin_unlock_irqrestore(&usblp->lock, flags); + if (nonblock) + return -EAGAIN; + return 1; +} + +/* + * Please check ->bidir and other such things outside for now. + */ +static int usblp_submit_read(struct usblp *usblp) +{ + struct urb *urb; + unsigned long flags; + int rc; + + rc = -ENOMEM; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) + goto raise_urb; + + usb_fill_bulk_urb(urb, usblp->dev, + usb_rcvbulkpipe(usblp->dev, + usblp->protocol[usblp->current_protocol].epread->bEndpointAddress), + usblp->readbuf, USBLP_BUF_SIZE_IN, + usblp_bulk_read, usblp); + usb_anchor_urb(urb, &usblp->urbs); + + spin_lock_irqsave(&usblp->lock, flags); + usblp->readcount = 0; /* XXX Why here? */ + usblp->rcomplete = 0; + spin_unlock_irqrestore(&usblp->lock, flags); + if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) { + dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc); + spin_lock_irqsave(&usblp->lock, flags); + usblp->rstatus = rc; + usblp->rcomplete = 1; + spin_unlock_irqrestore(&usblp->lock, flags); + goto raise_submit; + } + + return 0; + +raise_submit: + usb_unanchor_urb(urb); + usb_free_urb(urb); +raise_urb: + return rc; +} + +/* + * Checks for printers that have quirks, such as requiring unidirectional + * communication but reporting bidirectional; currently some HP printers + * have this flaw (HP 810, 880, 895, etc.), or needing an init string + * sent at each open (like some Epsons). + * Returns 1 if found, 0 if not found. + * + * HP recommended that we use the bidirectional interface but + * don't attempt any bulk IN transfers from the IN endpoint. + * Here's some more detail on the problem: + * The problem is not that it isn't bidirectional though. The problem + * is that if you request a device ID, or status information, while + * the buffers are full, the return data will end up in the print data + * buffer. For example if you make sure you never request the device ID + * while you are sending print data, and you don't try to query the + * printer status every couple of milliseconds, you will probably be OK. + */ +static unsigned int usblp_quirks(__u16 vendor, __u16 product) +{ + int i; + + for (i = 0; quirk_printers[i].vendorId; i++) { + if (vendor == quirk_printers[i].vendorId && + product == quirk_printers[i].productId) + return quirk_printers[i].quirks; + } + return 0; +} + +static const struct file_operations usblp_fops = { + .owner = THIS_MODULE, + .read = usblp_read, + .write = usblp_write, + .poll = usblp_poll, + .unlocked_ioctl = usblp_ioctl, + .compat_ioctl = usblp_ioctl, + .open = usblp_open, + .release = usblp_release, + .llseek = noop_llseek, +}; + +static char *usblp_devnode(struct device *dev, umode_t *mode) +{ + return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev)); +} + +static struct usb_class_driver usblp_class = { + .name = "lp%d", + .devnode = usblp_devnode, + .fops = &usblp_fops, + .minor_base = USBLP_MINOR_BASE, +}; + +static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usblp *usblp = usb_get_intfdata(intf); + + if (usblp->device_id_string[0] == 0 && + usblp->device_id_string[1] == 0) + return 0; + + return sprintf(buf, "%s", usblp->device_id_string+2); +} + +static DEVICE_ATTR_RO(ieee1284_id); + +static int usblp_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usblp *usblp; + int protocol; + int retval; + + /* Malloc and start initializing usblp structure so we can use it + * directly. */ + usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL); + if (!usblp) { + retval = -ENOMEM; + goto abort_ret; + } + usblp->dev = dev; + mutex_init(&usblp->wmut); + mutex_init(&usblp->mut); + spin_lock_init(&usblp->lock); + init_waitqueue_head(&usblp->rwait); + init_waitqueue_head(&usblp->wwait); + init_usb_anchor(&usblp->urbs); + usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + usblp->intf = usb_get_intf(intf); + + /* Malloc device ID string buffer to the largest expected length, + * since we can re-query it on an ioctl and a dynamic string + * could change in length. */ + if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) { + retval = -ENOMEM; + goto abort; + } + + /* + * Allocate read buffer. We somewhat wastefully + * malloc both regardless of bidirectionality, because the + * alternate setting can be changed later via an ioctl. + */ + if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) { + retval = -ENOMEM; + goto abort; + } + + /* Allocate buffer for printer status */ + usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL); + if (!usblp->statusbuf) { + retval = -ENOMEM; + goto abort; + } + + /* Lookup quirks for this printer. */ + usblp->quirks = usblp_quirks( + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + /* Analyze and pick initial alternate settings and endpoints. */ + protocol = usblp_select_alts(usblp); + if (protocol < 0) { + dev_dbg(&intf->dev, + "incompatible printer-class device 0x%4.4X/0x%4.4X\n", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + retval = -ENODEV; + goto abort; + } + + /* Setup the selected alternate setting and endpoints. */ + if (usblp_set_protocol(usblp, protocol) < 0) { + retval = -ENODEV; /* ->probe isn't ->ioctl */ + goto abort; + } + + /* Retrieve and store the device ID string. */ + usblp_cache_device_id_string(usblp); + retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id); + if (retval) + goto abort_intfdata; + +#ifdef DEBUG + usblp_check_status(usblp, 0); +#endif + + usb_set_intfdata(intf, usblp); + + usblp->present = 1; + + retval = usb_register_dev(intf, &usblp_class); + if (retval) { + dev_err(&intf->dev, + "usblp: Not able to get a minor (base %u, slice default): %d\n", + USBLP_MINOR_BASE, retval); + goto abort_intfdata; + } + usblp->minor = intf->minor; + dev_info(&intf->dev, + "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n", + usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, + usblp->ifnum, + usblp->protocol[usblp->current_protocol].alt_setting, + usblp->current_protocol, + le16_to_cpu(usblp->dev->descriptor.idVendor), + le16_to_cpu(usblp->dev->descriptor.idProduct)); + + return 0; + +abort_intfdata: + usb_set_intfdata(intf, NULL); + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); +abort: + kfree(usblp->readbuf); + kfree(usblp->statusbuf); + kfree(usblp->device_id_string); + usb_put_intf(usblp->intf); + kfree(usblp); +abort_ret: + return retval; +} + +/* + * We are a "new" style driver with usb_device_id table, + * but our requirements are too intricate for simple match to handle. + * + * The "proto_bias" option may be used to specify the preferred protocol + * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, + * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol, + * then we bind to it. + * + * The best interface for us is USB_CLASS_PRINTER/1/2, because it + * is compatible with a stream of characters. If we find it, we bind to it. + * + * Note that the people from hpoj.sourceforge.net need to be able to + * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls + * for this purpose. + * + * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3, + * even though it's probably not stream-compatible, because this matches + * the behaviour of the old code. + * + * If nothing else, we bind to USB_CLASS_PRINTER/1/1 + * - the unidirectional interface. + */ +static int usblp_select_alts(struct usblp *usblp) +{ + struct usb_interface *if_alt; + struct usb_host_interface *ifd; + struct usb_endpoint_descriptor *epwrite, *epread; + int p, i; + int res; + + if_alt = usblp->intf; + + for (p = 0; p < USBLP_MAX_PROTOCOLS; p++) + usblp->protocol[p].alt_setting = -1; + + /* Find out what we have. */ + for (i = 0; i < if_alt->num_altsetting; i++) { + ifd = &if_alt->altsetting[i]; + + if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER || + ifd->desc.bInterfaceSubClass != 1) + if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS)) + continue; + + if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL || + ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL) + continue; + + /* Look for the expected bulk endpoints. */ + if (ifd->desc.bInterfaceProtocol > 1) { + res = usb_find_common_endpoints(ifd, + &epread, &epwrite, NULL, NULL); + } else { + epread = NULL; + res = usb_find_bulk_out_endpoint(ifd, &epwrite); + } + + /* Ignore buggy hardware without the right endpoints. */ + if (res) + continue; + + /* Turn off reads for buggy bidirectional printers. */ + if (usblp->quirks & USBLP_QUIRK_BIDIR) { + printk(KERN_INFO "usblp%d: Disabling reads from " + "problematic bidirectional printer\n", + usblp->minor); + epread = NULL; + } + + usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting = + ifd->desc.bAlternateSetting; + usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite; + usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread; + } + + /* If our requested protocol is supported, then use it. */ + if (proto_bias >= USBLP_FIRST_PROTOCOL && + proto_bias <= USBLP_LAST_PROTOCOL && + usblp->protocol[proto_bias].alt_setting != -1) + return proto_bias; + + /* Ordering is important here. */ + if (usblp->protocol[2].alt_setting != -1) + return 2; + if (usblp->protocol[1].alt_setting != -1) + return 1; + if (usblp->protocol[3].alt_setting != -1) + return 3; + + /* If nothing is available, then don't bind to this device. */ + return -1; +} + +static int usblp_set_protocol(struct usblp *usblp, int protocol) +{ + int r, alts; + + if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL) + return -EINVAL; + + /* Don't unnecessarily set the interface if there's a single alt. */ + if (usblp->intf->num_altsetting > 1) { + alts = usblp->protocol[protocol].alt_setting; + if (alts < 0) + return -EINVAL; + r = usb_set_interface(usblp->dev, usblp->ifnum, alts); + if (r < 0) { + printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", + alts, usblp->ifnum); + return r; + } + } + + usblp->bidir = (usblp->protocol[protocol].epread != NULL); + usblp->current_protocol = protocol; + dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n", + usblp->minor, protocol); + return 0; +} + +/* Retrieves and caches device ID string. + * Returns length, including length bytes but not null terminator. + * On error, returns a negative errno value. */ +static int usblp_cache_device_id_string(struct usblp *usblp) +{ + int err, length; + + err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1); + if (err < 0) { + dev_dbg(&usblp->intf->dev, + "usblp%d: error = %d reading IEEE-1284 Device ID string\n", + usblp->minor, err); + usblp->device_id_string[0] = usblp->device_id_string[1] = '\0'; + return -EIO; + } + + /* First two bytes are length in big-endian. + * They count themselves, and we copy them into + * the user's buffer. */ + length = be16_to_cpu(*((__be16 *)usblp->device_id_string)); + if (length < 2) + length = 2; + else if (length >= USBLP_DEVICE_ID_SIZE) + length = USBLP_DEVICE_ID_SIZE - 1; + usblp->device_id_string[length] = '\0'; + + dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n", + usblp->minor, length, &usblp->device_id_string[2]); + + return length; +} + +static void usblp_disconnect(struct usb_interface *intf) +{ + struct usblp *usblp = usb_get_intfdata(intf); + + usb_deregister_dev(intf, &usblp_class); + + if (!usblp || !usblp->dev) { + dev_err(&intf->dev, "bogus disconnect\n"); + BUG(); + } + + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); + + mutex_lock(&usblp_mutex); + mutex_lock(&usblp->mut); + usblp->present = 0; + wake_up(&usblp->wwait); + wake_up(&usblp->rwait); + usb_set_intfdata(intf, NULL); + + usblp_unlink_urbs(usblp); + mutex_unlock(&usblp->mut); + usb_poison_anchored_urbs(&usblp->urbs); + + if (!usblp->used) + usblp_cleanup(usblp); + + mutex_unlock(&usblp_mutex); +} + +static int usblp_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usblp *usblp = usb_get_intfdata(intf); + + usblp_unlink_urbs(usblp); +#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ + /* not strictly necessary, but just in case */ + wake_up(&usblp->wwait); + wake_up(&usblp->rwait); +#endif + + return 0; +} + +static int usblp_resume(struct usb_interface *intf) +{ + struct usblp *usblp = usb_get_intfdata(intf); + int r; + + r = handle_bidir(usblp); + + return r; +} + +static const struct usb_device_id usblp_ids[] = { + { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) }, + { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) }, + { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) }, + { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) }, + { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) }, + { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) }, + { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */ + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usblp_ids); + +static struct usb_driver usblp_driver = { + .name = "usblp", + .probe = usblp_probe, + .disconnect = usblp_disconnect, + .suspend = usblp_suspend, + .resume = usblp_resume, + .id_table = usblp_ids, + .supports_autosuspend = 1, +}; + +module_usb_driver(usblp_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +module_param(proto_bias, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c new file mode 100644 index 000000000..5c98f5612 --- /dev/null +++ b/drivers/usb/class/usbtmc.c @@ -0,0 +1,1723 @@ +// SPDX-License-Identifier: GPL-2.0+ +/** + * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver + * + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/kref.h> +#include <linux/slab.h> +#include <linux/poll.h> +#include <linux/mutex.h> +#include <linux/usb.h> +#include <linux/compat.h> +#include <linux/usb/tmc.h> + + +#define USBTMC_HEADER_SIZE 12 +#define USBTMC_MINOR_BASE 176 + +/* + * Size of driver internal IO buffer. Must be multiple of 4 and at least as + * large as wMaxPacketSize (which is usually 512 bytes). + */ +#define USBTMC_SIZE_IOBUFFER 2048 + +/* Minimum USB timeout (in milliseconds) */ +#define USBTMC_MIN_TIMEOUT 100 +/* Default USB timeout (in milliseconds) */ +#define USBTMC_TIMEOUT 5000 + +/* + * Maximum number of read cycles to empty bulk in endpoint during CLEAR and + * ABORT_BULK_IN requests. Ends the loop if (for whatever reason) a short + * packet is never read. + */ +#define USBTMC_MAX_READS_TO_CLEAR_BULK_IN 100 + +static const struct usb_device_id usbtmc_devices[] = { + { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, + { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), }, + { 0, } /* terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usbtmc_devices); + +/* + * This structure is the capabilities for the device + * See section 4.2.1.8 of the USBTMC specification, + * and section 4.2.2 of the USBTMC usb488 subclass + * specification for details. + */ +struct usbtmc_dev_capabilities { + __u8 interface_capabilities; + __u8 device_capabilities; + __u8 usb488_interface_capabilities; + __u8 usb488_device_capabilities; +}; + +/* This structure holds private data for each USBTMC device. One copy is + * allocated for each USBTMC device in the driver's probe function. + */ +struct usbtmc_device_data { + const struct usb_device_id *id; + struct usb_device *usb_dev; + struct usb_interface *intf; + struct list_head file_list; + + unsigned int bulk_in; + unsigned int bulk_out; + + u8 bTag; + u8 bTag_last_write; /* needed for abort */ + u8 bTag_last_read; /* needed for abort */ + + /* data for interrupt in endpoint handling */ + u8 bNotify1; + u8 bNotify2; + u16 ifnum; + u8 iin_bTag; + u8 *iin_buffer; + atomic_t iin_data_valid; + unsigned int iin_ep; + int iin_ep_present; + int iin_interval; + struct urb *iin_urb; + u16 iin_wMaxPacketSize; + + /* coalesced usb488_caps from usbtmc_dev_capabilities */ + __u8 usb488_caps; + + /* attributes from the USB TMC spec for this device */ + u8 TermChar; + bool TermCharEnabled; + bool auto_abort; + + bool zombie; /* fd of disconnected device */ + + struct usbtmc_dev_capabilities capabilities; + struct kref kref; + struct mutex io_mutex; /* only one i/o function running at a time */ + wait_queue_head_t waitq; + struct fasync_struct *fasync; + spinlock_t dev_lock; /* lock for file_list */ +}; +#define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref) + +/* + * This structure holds private data for each USBTMC file handle. + */ +struct usbtmc_file_data { + struct usbtmc_device_data *data; + struct list_head file_elem; + + u32 timeout; + u8 srq_byte; + atomic_t srq_asserted; + u8 eom_val; + u8 term_char; + bool term_char_enabled; +}; + +/* Forward declarations */ +static struct usb_driver usbtmc_driver; + +static void usbtmc_delete(struct kref *kref) +{ + struct usbtmc_device_data *data = to_usbtmc_data(kref); + + usb_put_dev(data->usb_dev); + kfree(data); +} + +static int usbtmc_open(struct inode *inode, struct file *filp) +{ + struct usb_interface *intf; + struct usbtmc_device_data *data; + struct usbtmc_file_data *file_data; + + intf = usb_find_interface(&usbtmc_driver, iminor(inode)); + if (!intf) { + pr_err("can not find device for minor %d", iminor(inode)); + return -ENODEV; + } + + file_data = kzalloc(sizeof(*file_data), GFP_KERNEL); + if (!file_data) + return -ENOMEM; + + data = usb_get_intfdata(intf); + /* Protect reference to data from file structure until release */ + kref_get(&data->kref); + + mutex_lock(&data->io_mutex); + file_data->data = data; + + /* copy default values from device settings */ + file_data->timeout = USBTMC_TIMEOUT; + file_data->term_char = data->TermChar; + file_data->term_char_enabled = data->TermCharEnabled; + file_data->eom_val = 1; + + INIT_LIST_HEAD(&file_data->file_elem); + spin_lock_irq(&data->dev_lock); + list_add_tail(&file_data->file_elem, &data->file_list); + spin_unlock_irq(&data->dev_lock); + mutex_unlock(&data->io_mutex); + + /* Store pointer in file structure's private data field */ + filp->private_data = file_data; + + return 0; +} + +static int usbtmc_release(struct inode *inode, struct file *file) +{ + struct usbtmc_file_data *file_data = file->private_data; + + /* prevent IO _AND_ usbtmc_interrupt */ + mutex_lock(&file_data->data->io_mutex); + spin_lock_irq(&file_data->data->dev_lock); + + list_del(&file_data->file_elem); + + spin_unlock_irq(&file_data->data->dev_lock); + mutex_unlock(&file_data->data->io_mutex); + + kref_put(&file_data->data->kref, usbtmc_delete); + file_data->data = NULL; + kfree(file_data); + return 0; +} + +static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) +{ + u8 *buffer; + struct device *dev; + int rv; + int n; + int actual; + struct usb_host_interface *current_setting; + int max_size; + + dev = &data->intf->dev; + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INITIATE_ABORT_BULK_IN, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + data->bTag_last_read, data->bulk_in, + buffer, 2, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_FAILED) { + rv = 0; + goto exit; + } + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", + buffer[0]); + rv = -EPERM; + goto exit; + } + + max_size = 0; + current_setting = data->intf->cur_altsetting; + for (n = 0; n < current_setting->desc.bNumEndpoints; n++) + if (current_setting->endpoint[n].desc.bEndpointAddress == + data->bulk_in) + max_size = usb_endpoint_maxp(¤t_setting->endpoint[n].desc); + + if (max_size == 0) { + dev_err(dev, "Couldn't get wMaxPacketSize\n"); + rv = -EPERM; + goto exit; + } + + dev_dbg(&data->intf->dev, "wMaxPacketSize is %d\n", max_size); + + n = 0; + + do { + dev_dbg(dev, "Reading from bulk in EP\n"); + + rv = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, + &actual, USBTMC_TIMEOUT); + + n++; + + if (rv < 0) { + dev_err(dev, "usb_bulk_msg returned %d\n", rv); + goto exit; + } + } while ((actual == max_size) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); + + if (actual == max_size) { + dev_err(dev, "Couldn't clear device buffer within %d cycles\n", + USBTMC_MAX_READS_TO_CLEAR_BULK_IN); + rv = -EPERM; + goto exit; + } + + n = 0; + +usbtmc_abort_bulk_in_status: + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + 0, data->bulk_in, buffer, 0x08, + USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_SUCCESS) { + rv = 0; + goto exit; + } + + if (buffer[0] != USBTMC_STATUS_PENDING) { + dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + + if (buffer[1] == 1) + do { + dev_dbg(dev, "Reading from bulk in EP\n"); + + rv = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, + &actual, USBTMC_TIMEOUT); + + n++; + + if (rv < 0) { + dev_err(dev, "usb_bulk_msg returned %d\n", rv); + goto exit; + } + } while ((actual == max_size) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); + + if (actual == max_size) { + dev_err(dev, "Couldn't clear device buffer within %d cycles\n", + USBTMC_MAX_READS_TO_CLEAR_BULK_IN); + rv = -EPERM; + goto exit; + } + + goto usbtmc_abort_bulk_in_status; + +exit: + kfree(buffer); + return rv; + +} + +static int usbtmc_ioctl_abort_bulk_out_tag(struct usbtmc_device_data *data, + u8 tag) +{ + struct device *dev; + u8 *buffer; + int rv; + int n; + + dev = &data->intf->dev; + + buffer = kmalloc(8, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + tag, data->bulk_out, + buffer, 2, USB_CTRL_GET_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", buffer[0]); + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", + buffer[0]); + rv = -EPERM; + goto exit; + } + + n = 0; + +usbtmc_abort_bulk_out_check_status: + /* do not stress device with subsequent requests */ + msleep(50); + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + 0, data->bulk_out, buffer, 0x08, + USB_CTRL_GET_TIMEOUT); + n++; + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "CHECK_ABORT_BULK_OUT returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_SUCCESS) + goto usbtmc_abort_bulk_out_clear_halt; + + if ((buffer[0] == USBTMC_STATUS_PENDING) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)) + goto usbtmc_abort_bulk_out_check_status; + + rv = -EPERM; + goto exit; + +usbtmc_abort_bulk_out_clear_halt: + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data) +{ + return usbtmc_ioctl_abort_bulk_out_tag(data, data->bTag_last_write); +} + +static int usbtmc488_ioctl_read_stb(struct usbtmc_file_data *file_data, + void __user *arg) +{ + struct usbtmc_device_data *data = file_data->data; + struct device *dev = &data->intf->dev; + int srq_asserted = 0; + u8 *buffer; + u8 tag; + __u8 stb; + int rv; + + dev_dbg(dev, "Enter ioctl_read_stb iin_ep_present: %d\n", + data->iin_ep_present); + + spin_lock_irq(&data->dev_lock); + srq_asserted = atomic_xchg(&file_data->srq_asserted, srq_asserted); + if (srq_asserted) { + /* a STB with SRQ is already received */ + stb = file_data->srq_byte; + spin_unlock_irq(&data->dev_lock); + rv = put_user(stb, (__u8 __user *)arg); + dev_dbg(dev, "stb:0x%02x with srq received %d\n", + (unsigned int)stb, rv); + return rv; + } + spin_unlock_irq(&data->dev_lock); + + buffer = kmalloc(8, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + atomic_set(&data->iin_data_valid, 0); + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC488_REQUEST_READ_STATUS_BYTE, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + data->iin_bTag, + data->ifnum, + buffer, 0x03, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "stb usb_control_msg returned %d\n", rv); + goto exit; + } + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "control status returned %x\n", buffer[0]); + rv = -EIO; + goto exit; + } + + if (data->iin_ep_present) { + rv = wait_event_interruptible_timeout( + data->waitq, + atomic_read(&data->iin_data_valid) != 0, + file_data->timeout); + if (rv < 0) { + dev_dbg(dev, "wait interrupted %d\n", rv); + goto exit; + } + + if (rv == 0) { + dev_dbg(dev, "wait timed out\n"); + rv = -ETIMEDOUT; + goto exit; + } + + tag = data->bNotify1 & 0x7f; + if (tag != data->iin_bTag) { + dev_err(dev, "expected bTag %x got %x\n", + data->iin_bTag, tag); + } + + stb = data->bNotify2; + } else { + stb = buffer[2]; + } + + rv = put_user(stb, (__u8 __user *)arg); + dev_dbg(dev, "stb:0x%02x received %d\n", (unsigned int)stb, rv); + + exit: + /* bump interrupt bTag */ + data->iin_bTag += 1; + if (data->iin_bTag > 127) + /* 1 is for SRQ see USBTMC-USB488 subclass spec section 4.3.1 */ + data->iin_bTag = 2; + + kfree(buffer); + return rv; +} + +static int usbtmc488_ioctl_simple(struct usbtmc_device_data *data, + void __user *arg, unsigned int cmd) +{ + struct device *dev = &data->intf->dev; + __u8 val; + u8 *buffer; + u16 wValue; + int rv; + + if (!(data->usb488_caps & USBTMC488_CAPABILITY_SIMPLE)) + return -EINVAL; + + buffer = kmalloc(8, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if (cmd == USBTMC488_REQUEST_REN_CONTROL) { + rv = copy_from_user(&val, arg, sizeof(val)); + if (rv) { + rv = -EFAULT; + goto exit; + } + wValue = val ? 1 : 0; + } else { + wValue = 0; + } + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + cmd, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + wValue, + data->ifnum, + buffer, 0x01, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "simple usb_control_msg failed %d\n", rv); + goto exit; + } else if (rv != 1) { + dev_warn(dev, "simple usb_control_msg returned %d\n", rv); + rv = -EIO; + goto exit; + } + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "simple control status returned %x\n", buffer[0]); + rv = -EIO; + goto exit; + } + rv = 0; + + exit: + kfree(buffer); + return rv; +} + +/* + * Sends a TRIGGER Bulk-OUT command message + * See the USBTMC-USB488 specification, Table 2. + * + * Also updates bTag_last_write. + */ +static int usbtmc488_ioctl_trigger(struct usbtmc_file_data *file_data) +{ + struct usbtmc_device_data *data = file_data->data; + int retval; + u8 *buffer; + int actual; + + buffer = kzalloc(USBTMC_HEADER_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + buffer[0] = 128; + buffer[1] = data->bTag; + buffer[2] = ~data->bTag; + + retval = usb_bulk_msg(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, + data->bulk_out), + buffer, USBTMC_HEADER_SIZE, + &actual, file_data->timeout); + + /* Store bTag (in case we need to abort) */ + data->bTag_last_write = data->bTag; + + /* Increment bTag -- and increment again if zero */ + data->bTag++; + if (!data->bTag) + data->bTag++; + + kfree(buffer); + if (retval < 0) { + dev_err(&data->intf->dev, "%s returned %d\n", + __func__, retval); + return retval; + } + + return 0; +} + +/* + * Sends a REQUEST_DEV_DEP_MSG_IN message on the Bulk-OUT endpoint. + * @transfer_size: number of bytes to request from the device. + * + * See the USBTMC specification, Table 4. + * + * Also updates bTag_last_write. + */ +static int send_request_dev_dep_msg_in(struct usbtmc_file_data *file_data, + size_t transfer_size) +{ + struct usbtmc_device_data *data = file_data->data; + int retval; + u8 *buffer; + int actual; + + buffer = kmalloc(USBTMC_HEADER_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + /* Setup IO buffer for REQUEST_DEV_DEP_MSG_IN message + * Refer to class specs for details + */ + buffer[0] = 2; + buffer[1] = data->bTag; + buffer[2] = ~data->bTag; + buffer[3] = 0; /* Reserved */ + buffer[4] = transfer_size >> 0; + buffer[5] = transfer_size >> 8; + buffer[6] = transfer_size >> 16; + buffer[7] = transfer_size >> 24; + buffer[8] = file_data->term_char_enabled * 2; + /* Use term character? */ + buffer[9] = file_data->term_char; + buffer[10] = 0; /* Reserved */ + buffer[11] = 0; /* Reserved */ + + /* Send bulk URB */ + retval = usb_bulk_msg(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, + data->bulk_out), + buffer, USBTMC_HEADER_SIZE, + &actual, file_data->timeout); + + /* Store bTag (in case we need to abort) */ + data->bTag_last_write = data->bTag; + + /* Increment bTag -- and increment again if zero */ + data->bTag++; + if (!data->bTag) + data->bTag++; + + kfree(buffer); + if (retval < 0) { + dev_err(&data->intf->dev, "usb_bulk_msg in send_request_dev_dep_msg_in() returned %d\n", retval); + return retval; + } + + return 0; +} + +static ssize_t usbtmc_read(struct file *filp, char __user *buf, + size_t count, loff_t *f_pos) +{ + struct usbtmc_file_data *file_data; + struct usbtmc_device_data *data; + struct device *dev; + u32 n_characters; + u8 *buffer; + int actual; + size_t done; + size_t remaining; + int retval; + size_t this_part; + + /* Get pointer to private data structure */ + file_data = filp->private_data; + data = file_data->data; + dev = &data->intf->dev; + + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + mutex_lock(&data->io_mutex); + if (data->zombie) { + retval = -ENODEV; + goto exit; + } + + dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count); + + retval = send_request_dev_dep_msg_in(file_data, count); + + if (retval < 0) { + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_out(data); + goto exit; + } + + /* Loop until we have fetched everything we requested */ + remaining = count; + this_part = remaining; + done = 0; + + while (remaining > 0) { + /* Send bulk URB */ + retval = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, &actual, + file_data->timeout); + + dev_dbg(dev, "usb_bulk_msg: retval(%u), done(%zu), remaining(%zu), actual(%d)\n", retval, done, remaining, actual); + + /* Store bTag (in case we need to abort) */ + data->bTag_last_read = data->bTag; + + if (retval < 0) { + dev_dbg(dev, "Unable to read data, error %d\n", retval); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_in(data); + goto exit; + } + + /* Parse header in first packet */ + if (done == 0) { + /* Sanity checks for the header */ + if (actual < USBTMC_HEADER_SIZE) { + dev_err(dev, "Device sent too small first packet: %u < %u\n", actual, USBTMC_HEADER_SIZE); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_in(data); + goto exit; + } + + if (buffer[0] != 2) { + dev_err(dev, "Device sent reply with wrong MsgID: %u != 2\n", buffer[0]); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_in(data); + goto exit; + } + + if (buffer[1] != data->bTag_last_write) { + dev_err(dev, "Device sent reply with wrong bTag: %u != %u\n", buffer[1], data->bTag_last_write); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_in(data); + goto exit; + } + + /* How many characters did the instrument send? */ + n_characters = buffer[4] + + (buffer[5] << 8) + + (buffer[6] << 16) + + (buffer[7] << 24); + + if (n_characters > this_part) { + dev_err(dev, "Device wants to return more data than requested: %u > %zu\n", n_characters, count); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_in(data); + goto exit; + } + + /* Remove the USBTMC header */ + actual -= USBTMC_HEADER_SIZE; + + /* Check if the message is smaller than requested */ + if (remaining > n_characters) + remaining = n_characters; + /* Remove padding if it exists */ + if (actual > remaining) + actual = remaining; + + dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n", n_characters, buffer[8]); + + remaining -= actual; + + /* Terminate if end-of-message bit received from device */ + if ((buffer[8] & 0x01) && (actual >= n_characters)) + remaining = 0; + + dev_dbg(dev, "Bulk-IN header: remaining(%zu), buf(%p), buffer(%p) done(%zu)\n", remaining,buf,buffer,done); + + + /* Copy buffer to user space */ + if (copy_to_user(buf + done, &buffer[USBTMC_HEADER_SIZE], actual)) { + /* There must have been an addressing problem */ + retval = -EFAULT; + goto exit; + } + done += actual; + } + else { + if (actual > remaining) + actual = remaining; + + remaining -= actual; + + dev_dbg(dev, "Bulk-IN header cont: actual(%u), done(%zu), remaining(%zu), buf(%p), buffer(%p)\n", actual, done, remaining,buf,buffer); + + /* Copy buffer to user space */ + if (copy_to_user(buf + done, buffer, actual)) { + /* There must have been an addressing problem */ + retval = -EFAULT; + goto exit; + } + done += actual; + } + } + + /* Update file position value */ + *f_pos = *f_pos + done; + retval = done; + +exit: + mutex_unlock(&data->io_mutex); + kfree(buffer); + return retval; +} + +static ssize_t usbtmc_write(struct file *filp, const char __user *buf, + size_t count, loff_t *f_pos) +{ + struct usbtmc_file_data *file_data; + struct usbtmc_device_data *data; + u8 *buffer; + int retval; + int actual; + unsigned long int n_bytes; + int remaining; + int done; + int this_part; + + file_data = filp->private_data; + data = file_data->data; + + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + mutex_lock(&data->io_mutex); + if (data->zombie) { + retval = -ENODEV; + goto exit; + } + + remaining = count; + done = 0; + + while (remaining > 0) { + if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE) { + this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE; + buffer[8] = 0; + } else { + this_part = remaining; + buffer[8] = file_data->eom_val; + } + + /* Setup IO buffer for DEV_DEP_MSG_OUT message */ + buffer[0] = 1; + buffer[1] = data->bTag; + buffer[2] = ~data->bTag; + buffer[3] = 0; /* Reserved */ + buffer[4] = this_part >> 0; + buffer[5] = this_part >> 8; + buffer[6] = this_part >> 16; + buffer[7] = this_part >> 24; + /* buffer[8] is set above... */ + buffer[9] = 0; /* Reserved */ + buffer[10] = 0; /* Reserved */ + buffer[11] = 0; /* Reserved */ + + if (copy_from_user(&buffer[USBTMC_HEADER_SIZE], buf + done, this_part)) { + retval = -EFAULT; + goto exit; + } + + n_bytes = roundup(USBTMC_HEADER_SIZE + this_part, 4); + memset(buffer + USBTMC_HEADER_SIZE + this_part, 0, n_bytes - (USBTMC_HEADER_SIZE + this_part)); + + do { + retval = usb_bulk_msg(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, + data->bulk_out), + buffer, n_bytes, + &actual, file_data->timeout); + if (retval != 0) + break; + n_bytes -= actual; + } while (n_bytes); + + data->bTag_last_write = data->bTag; + data->bTag++; + + if (!data->bTag) + data->bTag++; + + if (retval < 0) { + dev_err(&data->intf->dev, + "Unable to send data, error %d\n", retval); + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_out(data); + goto exit; + } + + remaining -= this_part; + done += this_part; + } + + retval = count; +exit: + mutex_unlock(&data->io_mutex); + kfree(buffer); + return retval; +} + +static int usbtmc_ioctl_clear(struct usbtmc_device_data *data) +{ + struct usb_host_interface *current_setting; + struct usb_endpoint_descriptor *desc; + struct device *dev; + u8 *buffer; + int rv; + int n; + int actual = 0; + int max_size; + + dev = &data->intf->dev; + + dev_dbg(dev, "Sending INITIATE_CLEAR request\n"); + + buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INITIATE_CLEAR, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 1, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INITIATE_CLEAR returned %x\n", buffer[0]); + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INITIATE_CLEAR returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + + max_size = 0; + current_setting = data->intf->cur_altsetting; + for (n = 0; n < current_setting->desc.bNumEndpoints; n++) { + desc = ¤t_setting->endpoint[n].desc; + if (desc->bEndpointAddress == data->bulk_in) + max_size = usb_endpoint_maxp(desc); + } + + if (max_size == 0) { + dev_err(dev, "Couldn't get wMaxPacketSize\n"); + rv = -EPERM; + goto exit; + } + + dev_dbg(dev, "wMaxPacketSize is %d\n", max_size); + + n = 0; + +usbtmc_clear_check_status: + + dev_dbg(dev, "Sending CHECK_CLEAR_STATUS request\n"); + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_CHECK_CLEAR_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 2, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]); + + if (buffer[0] == USBTMC_STATUS_SUCCESS) + goto usbtmc_clear_bulk_out_halt; + + if (buffer[0] != USBTMC_STATUS_PENDING) { + dev_err(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + + if (buffer[1] == 1) + do { + dev_dbg(dev, "Reading from bulk in EP\n"); + + actual = 0; + rv = usb_bulk_msg(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, + data->bulk_in), + buffer, USBTMC_SIZE_IOBUFFER, + &actual, USBTMC_TIMEOUT); + n++; + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", + rv); + goto exit; + } + } while ((actual == max_size) && + (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); + + if (actual == max_size) { + dev_err(dev, "Couldn't clear device buffer within %d cycles\n", + USBTMC_MAX_READS_TO_CLEAR_BULK_IN); + rv = -EPERM; + goto exit; + } + + goto usbtmc_clear_check_status; + +usbtmc_clear_bulk_out_halt: + + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data) +{ + int rv; + + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); + + if (rv < 0) { + dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", + rv); + return rv; + } + return 0; +} + +static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data) +{ + int rv; + + rv = usb_clear_halt(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, data->bulk_in)); + + if (rv < 0) { + dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", + rv); + return rv; + } + return 0; +} + +static int get_capabilities(struct usbtmc_device_data *data) +{ + struct device *dev = &data->usb_dev->dev; + char *buffer; + int rv = 0; + + buffer = kmalloc(0x18, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_GET_CAPABILITIES, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 0x18, USBTMC_TIMEOUT); + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto err_out; + } + + dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); + rv = -EPERM; + goto err_out; + } + dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]); + dev_dbg(dev, "Device capabilities are %x\n", buffer[5]); + dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]); + dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]); + + data->capabilities.interface_capabilities = buffer[4]; + data->capabilities.device_capabilities = buffer[5]; + data->capabilities.usb488_interface_capabilities = buffer[14]; + data->capabilities.usb488_device_capabilities = buffer[15]; + data->usb488_caps = (buffer[14] & 0x07) | ((buffer[15] & 0x0f) << 4); + rv = 0; + +err_out: + kfree(buffer); + return rv; +} + +#define capability_attribute(name) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbtmc_device_data *data = usb_get_intfdata(intf); \ + \ + return sprintf(buf, "%d\n", data->capabilities.name); \ +} \ +static DEVICE_ATTR_RO(name) + +capability_attribute(interface_capabilities); +capability_attribute(device_capabilities); +capability_attribute(usb488_interface_capabilities); +capability_attribute(usb488_device_capabilities); + +static struct attribute *capability_attrs[] = { + &dev_attr_interface_capabilities.attr, + &dev_attr_device_capabilities.attr, + &dev_attr_usb488_interface_capabilities.attr, + &dev_attr_usb488_device_capabilities.attr, + NULL, +}; + +static const struct attribute_group capability_attr_grp = { + .attrs = capability_attrs, +}; + +static ssize_t TermChar_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbtmc_device_data *data = usb_get_intfdata(intf); + + return sprintf(buf, "%c\n", data->TermChar); +} + +static ssize_t TermChar_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbtmc_device_data *data = usb_get_intfdata(intf); + + if (count < 1) + return -EINVAL; + data->TermChar = buf[0]; + return count; +} +static DEVICE_ATTR_RW(TermChar); + +#define data_attribute(name) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbtmc_device_data *data = usb_get_intfdata(intf); \ + \ + return sprintf(buf, "%d\n", data->name); \ +} \ +static ssize_t name##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbtmc_device_data *data = usb_get_intfdata(intf); \ + ssize_t result; \ + unsigned val; \ + \ + result = sscanf(buf, "%u\n", &val); \ + if (result != 1) \ + result = -EINVAL; \ + data->name = val; \ + if (result < 0) \ + return result; \ + else \ + return count; \ +} \ +static DEVICE_ATTR_RW(name) + +data_attribute(TermCharEnabled); +data_attribute(auto_abort); + +static struct attribute *data_attrs[] = { + &dev_attr_TermChar.attr, + &dev_attr_TermCharEnabled.attr, + &dev_attr_auto_abort.attr, + NULL, +}; + +static const struct attribute_group data_attr_grp = { + .attrs = data_attrs, +}; + +static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data) +{ + struct device *dev; + u8 *buffer; + int rv; + + dev = &data->intf->dev; + + buffer = kmalloc(2, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + rv = usb_control_msg(data->usb_dev, + usb_rcvctrlpipe(data->usb_dev, 0), + USBTMC_REQUEST_INDICATOR_PULSE, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, 0, buffer, 0x01, USBTMC_TIMEOUT); + + if (rv < 0) { + dev_err(dev, "usb_control_msg returned %d\n", rv); + goto exit; + } + + dev_dbg(dev, "INDICATOR_PULSE returned %x\n", buffer[0]); + + if (buffer[0] != USBTMC_STATUS_SUCCESS) { + dev_err(dev, "INDICATOR_PULSE returned %x\n", buffer[0]); + rv = -EPERM; + goto exit; + } + rv = 0; + +exit: + kfree(buffer); + return rv; +} + +/* + * Get the usb timeout value + */ +static int usbtmc_ioctl_get_timeout(struct usbtmc_file_data *file_data, + void __user *arg) +{ + u32 timeout; + + timeout = file_data->timeout; + + return put_user(timeout, (__u32 __user *)arg); +} + +/* + * Set the usb timeout value + */ +static int usbtmc_ioctl_set_timeout(struct usbtmc_file_data *file_data, + void __user *arg) +{ + u32 timeout; + + if (get_user(timeout, (__u32 __user *)arg)) + return -EFAULT; + + /* Note that timeout = 0 means + * MAX_SCHEDULE_TIMEOUT in usb_control_msg + */ + if (timeout < USBTMC_MIN_TIMEOUT) + return -EINVAL; + + file_data->timeout = timeout; + + return 0; +} + +/* + * enables/disables sending EOM on write + */ +static int usbtmc_ioctl_eom_enable(struct usbtmc_file_data *file_data, + void __user *arg) +{ + u8 eom_enable; + + if (copy_from_user(&eom_enable, arg, sizeof(eom_enable))) + return -EFAULT; + + if (eom_enable > 1) + return -EINVAL; + + file_data->eom_val = eom_enable; + + return 0; +} + +/* + * Configure termination character for read() + */ +static int usbtmc_ioctl_config_termc(struct usbtmc_file_data *file_data, + void __user *arg) +{ + struct usbtmc_termchar termc; + + if (copy_from_user(&termc, arg, sizeof(termc))) + return -EFAULT; + + if ((termc.term_char_enabled > 1) || + (termc.term_char_enabled && + !(file_data->data->capabilities.device_capabilities & 1))) + return -EINVAL; + + file_data->term_char = termc.term_char; + file_data->term_char_enabled = termc.term_char_enabled; + + return 0; +} + +static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct usbtmc_file_data *file_data; + struct usbtmc_device_data *data; + int retval = -EBADRQC; + + file_data = file->private_data; + data = file_data->data; + + mutex_lock(&data->io_mutex); + if (data->zombie) { + retval = -ENODEV; + goto skip_io_on_zombie; + } + + switch (cmd) { + case USBTMC_IOCTL_CLEAR_OUT_HALT: + retval = usbtmc_ioctl_clear_out_halt(data); + break; + + case USBTMC_IOCTL_CLEAR_IN_HALT: + retval = usbtmc_ioctl_clear_in_halt(data); + break; + + case USBTMC_IOCTL_INDICATOR_PULSE: + retval = usbtmc_ioctl_indicator_pulse(data); + break; + + case USBTMC_IOCTL_CLEAR: + retval = usbtmc_ioctl_clear(data); + break; + + case USBTMC_IOCTL_ABORT_BULK_OUT: + retval = usbtmc_ioctl_abort_bulk_out(data); + break; + + case USBTMC_IOCTL_ABORT_BULK_IN: + retval = usbtmc_ioctl_abort_bulk_in(data); + break; + + case USBTMC_IOCTL_GET_TIMEOUT: + retval = usbtmc_ioctl_get_timeout(file_data, + (void __user *)arg); + break; + + case USBTMC_IOCTL_SET_TIMEOUT: + retval = usbtmc_ioctl_set_timeout(file_data, + (void __user *)arg); + break; + + case USBTMC_IOCTL_EOM_ENABLE: + retval = usbtmc_ioctl_eom_enable(file_data, + (void __user *)arg); + break; + + case USBTMC_IOCTL_CONFIG_TERMCHAR: + retval = usbtmc_ioctl_config_termc(file_data, + (void __user *)arg); + break; + + case USBTMC488_IOCTL_GET_CAPS: + retval = copy_to_user((void __user *)arg, + &data->usb488_caps, + sizeof(data->usb488_caps)); + if (retval) + retval = -EFAULT; + break; + + case USBTMC488_IOCTL_READ_STB: + retval = usbtmc488_ioctl_read_stb(file_data, + (void __user *)arg); + break; + + case USBTMC488_IOCTL_REN_CONTROL: + retval = usbtmc488_ioctl_simple(data, (void __user *)arg, + USBTMC488_REQUEST_REN_CONTROL); + break; + + case USBTMC488_IOCTL_GOTO_LOCAL: + retval = usbtmc488_ioctl_simple(data, (void __user *)arg, + USBTMC488_REQUEST_GOTO_LOCAL); + break; + + case USBTMC488_IOCTL_LOCAL_LOCKOUT: + retval = usbtmc488_ioctl_simple(data, (void __user *)arg, + USBTMC488_REQUEST_LOCAL_LOCKOUT); + break; + + case USBTMC488_IOCTL_TRIGGER: + retval = usbtmc488_ioctl_trigger(file_data); + break; + } + +skip_io_on_zombie: + mutex_unlock(&data->io_mutex); + return retval; +} + +static int usbtmc_fasync(int fd, struct file *file, int on) +{ + struct usbtmc_file_data *file_data = file->private_data; + + return fasync_helper(fd, file, on, &file_data->data->fasync); +} + +static __poll_t usbtmc_poll(struct file *file, poll_table *wait) +{ + struct usbtmc_file_data *file_data = file->private_data; + struct usbtmc_device_data *data = file_data->data; + __poll_t mask; + + mutex_lock(&data->io_mutex); + + if (data->zombie) { + mask = EPOLLHUP | EPOLLERR; + goto no_poll; + } + + poll_wait(file, &data->waitq, wait); + + mask = (atomic_read(&file_data->srq_asserted)) ? EPOLLPRI : 0; + +no_poll: + mutex_unlock(&data->io_mutex); + return mask; +} + +static const struct file_operations fops = { + .owner = THIS_MODULE, + .read = usbtmc_read, + .write = usbtmc_write, + .open = usbtmc_open, + .release = usbtmc_release, + .unlocked_ioctl = usbtmc_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = usbtmc_ioctl, +#endif + .fasync = usbtmc_fasync, + .poll = usbtmc_poll, + .llseek = default_llseek, +}; + +static struct usb_class_driver usbtmc_class = { + .name = "usbtmc%d", + .fops = &fops, + .minor_base = USBTMC_MINOR_BASE, +}; + +static void usbtmc_interrupt(struct urb *urb) +{ + struct usbtmc_device_data *data = urb->context; + struct device *dev = &data->intf->dev; + int status = urb->status; + int rv; + + dev_dbg(&data->intf->dev, "int status: %d len %d\n", + status, urb->actual_length); + + switch (status) { + case 0: /* SUCCESS */ + /* check for valid STB notification */ + if (data->iin_buffer[0] > 0x81) { + data->bNotify1 = data->iin_buffer[0]; + data->bNotify2 = data->iin_buffer[1]; + atomic_set(&data->iin_data_valid, 1); + wake_up_interruptible(&data->waitq); + goto exit; + } + /* check for SRQ notification */ + if (data->iin_buffer[0] == 0x81) { + unsigned long flags; + struct list_head *elem; + + if (data->fasync) + kill_fasync(&data->fasync, + SIGIO, POLL_PRI); + + spin_lock_irqsave(&data->dev_lock, flags); + list_for_each(elem, &data->file_list) { + struct usbtmc_file_data *file_data; + + file_data = list_entry(elem, + struct usbtmc_file_data, + file_elem); + file_data->srq_byte = data->iin_buffer[1]; + atomic_set(&file_data->srq_asserted, 1); + } + spin_unlock_irqrestore(&data->dev_lock, flags); + + dev_dbg(dev, "srq received bTag %x stb %x\n", + (unsigned int)data->iin_buffer[0], + (unsigned int)data->iin_buffer[1]); + wake_up_interruptible_all(&data->waitq); + goto exit; + } + dev_warn(dev, "invalid notification: %x\n", + data->iin_buffer[0]); + break; + case -EOVERFLOW: + dev_err(dev, "overflow with length %d, actual length is %d\n", + data->iin_wMaxPacketSize, urb->actual_length); + /* fall through */ + default: + /* urb terminated, clean up */ + dev_dbg(dev, "urb terminated, status: %d\n", status); + return; + } +exit: + rv = usb_submit_urb(urb, GFP_ATOMIC); + if (rv) + dev_err(dev, "usb_submit_urb failed: %d\n", rv); +} + +static void usbtmc_free_int(struct usbtmc_device_data *data) +{ + if (!data->iin_ep_present || !data->iin_urb) + return; + usb_kill_urb(data->iin_urb); + kfree(data->iin_buffer); + usb_free_urb(data->iin_urb); + kref_put(&data->kref, usbtmc_delete); +} + +static int usbtmc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usbtmc_device_data *data; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in; + int retcode; + + dev_dbg(&intf->dev, "%s called\n", __func__); + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->intf = intf; + data->id = id; + data->usb_dev = usb_get_dev(interface_to_usbdev(intf)); + usb_set_intfdata(intf, data); + kref_init(&data->kref); + mutex_init(&data->io_mutex); + init_waitqueue_head(&data->waitq); + atomic_set(&data->iin_data_valid, 0); + INIT_LIST_HEAD(&data->file_list); + spin_lock_init(&data->dev_lock); + + data->zombie = 0; + + /* Initialize USBTMC bTag and other fields */ + data->bTag = 1; + data->TermCharEnabled = 0; + data->TermChar = '\n'; + /* 2 <= bTag <= 127 USBTMC-USB488 subclass specification 4.3.1 */ + data->iin_bTag = 2; + + /* USBTMC devices have only one setting, so use that */ + iface_desc = data->intf->cur_altsetting; + data->ifnum = iface_desc->desc.bInterfaceNumber; + + /* Find bulk endpoints */ + retcode = usb_find_common_endpoints(iface_desc, + &bulk_in, &bulk_out, NULL, NULL); + if (retcode) { + dev_err(&intf->dev, "bulk endpoints not found\n"); + goto err_put; + } + + data->bulk_in = bulk_in->bEndpointAddress; + dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", data->bulk_in); + + data->bulk_out = bulk_out->bEndpointAddress; + dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", data->bulk_out); + + /* Find int endpoint */ + retcode = usb_find_int_in_endpoint(iface_desc, &int_in); + if (!retcode) { + data->iin_ep_present = 1; + data->iin_ep = int_in->bEndpointAddress; + data->iin_wMaxPacketSize = usb_endpoint_maxp(int_in); + data->iin_interval = int_in->bInterval; + dev_dbg(&intf->dev, "Found Int in endpoint at %u\n", + data->iin_ep); + } + + retcode = get_capabilities(data); + if (retcode) + dev_err(&intf->dev, "can't read capabilities\n"); + else + retcode = sysfs_create_group(&intf->dev.kobj, + &capability_attr_grp); + + if (data->iin_ep_present) { + /* allocate int urb */ + data->iin_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!data->iin_urb) { + retcode = -ENOMEM; + goto error_register; + } + + /* Protect interrupt in endpoint data until iin_urb is freed */ + kref_get(&data->kref); + + /* allocate buffer for interrupt in */ + data->iin_buffer = kmalloc(data->iin_wMaxPacketSize, + GFP_KERNEL); + if (!data->iin_buffer) { + retcode = -ENOMEM; + goto error_register; + } + + /* fill interrupt urb */ + usb_fill_int_urb(data->iin_urb, data->usb_dev, + usb_rcvintpipe(data->usb_dev, data->iin_ep), + data->iin_buffer, data->iin_wMaxPacketSize, + usbtmc_interrupt, + data, data->iin_interval); + + retcode = usb_submit_urb(data->iin_urb, GFP_KERNEL); + if (retcode) { + dev_err(&intf->dev, "Failed to submit iin_urb\n"); + goto error_register; + } + } + + retcode = sysfs_create_group(&intf->dev.kobj, &data_attr_grp); + + retcode = usb_register_dev(intf, &usbtmc_class); + if (retcode) { + dev_err(&intf->dev, "Not able to get a minor" + " (base %u, slice default): %d\n", USBTMC_MINOR_BASE, + retcode); + goto error_register; + } + dev_dbg(&intf->dev, "Using minor number %d\n", intf->minor); + + return 0; + +error_register: + sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); + sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); + usbtmc_free_int(data); +err_put: + kref_put(&data->kref, usbtmc_delete); + return retcode; +} + +static void usbtmc_disconnect(struct usb_interface *intf) +{ + struct usbtmc_device_data *data = usb_get_intfdata(intf); + + usb_deregister_dev(intf, &usbtmc_class); + sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); + sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); + mutex_lock(&data->io_mutex); + data->zombie = 1; + wake_up_interruptible_all(&data->waitq); + mutex_unlock(&data->io_mutex); + usbtmc_free_int(data); + kref_put(&data->kref, usbtmc_delete); +} + +static int usbtmc_suspend(struct usb_interface *intf, pm_message_t message) +{ + /* this driver does not have pending URBs */ + return 0; +} + +static int usbtmc_resume(struct usb_interface *intf) +{ + return 0; +} + +static struct usb_driver usbtmc_driver = { + .name = "usbtmc", + .id_table = usbtmc_devices, + .probe = usbtmc_probe, + .disconnect = usbtmc_disconnect, + .suspend = usbtmc_suspend, + .resume = usbtmc_resume, +}; + +module_usb_driver(usbtmc_driver); + +MODULE_LICENSE("GPL"); |