diff options
Diffstat (limited to 'drivers/usb/host/ehci-xilinx-of.c')
| -rw-r--r-- | drivers/usb/host/ehci-xilinx-of.c | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c new file mode 100644 index 000000000..d2a27578e --- /dev/null +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * EHCI HCD (Host Controller Driver) for USB. + * + * Bus Glue for Xilinx EHCI core on the of_platform bus + * + * Copyright (c) 2009 Xilinx, Inc. + * + * Based on "ehci-ppc-of.c" by Valentine Barshak <vbarshak@ru.mvista.com> + * and "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> + * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> + */ + +#include <linux/err.h> +#include <linux/signal.h> + +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +/** + * ehci_xilinx_port_handed_over - hand the port out if failed to enable it + * @hcd: Pointer to the usb_hcd device to which the host controller bound + * @portnum:Port number to which the device is attached. + * + * This function is used as a place to tell the user that the Xilinx USB host + * controller does support LS devices. And in an HS only configuration, it + * does not support FS devices either. It is hoped that this can help a + * confused user. + * + * There are cases when the host controller fails to enable the port due to, + * for example, insufficient power that can be supplied to the device from + * the USB bus. In those cases, the messages printed here are not helpful. + */ +static int ehci_xilinx_port_handed_over(struct usb_hcd *hcd, int portnum) +{ + dev_warn(hcd->self.controller, "port %d cannot be enabled\n", portnum); + if (hcd->has_tt) { + dev_warn(hcd->self.controller, + "Maybe you have connected a low speed device?\n"); + + dev_warn(hcd->self.controller, + "We do not support low speed devices\n"); + } else { + dev_warn(hcd->self.controller, + "Maybe your device is not a high speed device?\n"); + dev_warn(hcd->self.controller, + "The USB host controller does not support full speed " + "nor low speed devices\n"); + dev_warn(hcd->self.controller, + "You can reconfigure the host controller to have " + "full speed support\n"); + } + + return 0; +} + + +static const struct hc_driver ehci_xilinx_of_hc_driver = { + .description = hcd_name, + .product_desc = "OF EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + + /* + * basic lifecycle operations + */ + .reset = ehci_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif + .relinquish_port = NULL, + .port_handed_over = ehci_xilinx_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +/** + * ehci_hcd_xilinx_of_probe - Probe method for the USB host controller + * @op: pointer to the platform_device bound to the host controller + * + * This function requests resources and sets up appropriate properties for the + * host controller. Because the Xilinx USB host controller can be configured + * as HS only or HS/FS only, it checks the configuration in the device tree + * entry, and sets an appropriate value for hcd->has_tt. + */ +static int ehci_hcd_xilinx_of_probe(struct platform_device *op) +{ + struct device_node *dn = op->dev.of_node; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct resource res; + int irq; + int rv; + int *value; + + if (usb_disabled()) + return -ENODEV; + + dev_dbg(&op->dev, "initializing XILINX-OF USB Controller\n"); + + rv = of_address_to_resource(dn, 0, &res); + if (rv) + return rv; + + hcd = usb_create_hcd(&ehci_xilinx_of_hc_driver, &op->dev, + "XILINX-OF USB"); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res.start; + hcd->rsrc_len = resource_size(&res); + + irq = irq_of_parse_and_map(dn, 0); + if (!irq) { + dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", + __FILE__); + rv = -EBUSY; + goto err_irq; + } + + hcd->regs = devm_ioremap_resource(&op->dev, &res); + if (IS_ERR(hcd->regs)) { + rv = PTR_ERR(hcd->regs); + goto err_irq; + } + + ehci = hcd_to_ehci(hcd); + + /* This core always has big-endian register interface and uses + * big-endian memory descriptors. + */ + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + /* Check whether the FS support option is selected in the hardware. + */ + value = (int *)of_get_property(dn, "xlnx,support-usb-fs", NULL); + if (value && (*value == 1)) { + ehci_dbg(ehci, "USB host controller supports FS devices\n"); + hcd->has_tt = 1; + } else { + ehci_dbg(ehci, + "USB host controller is HS only\n"); + hcd->has_tt = 0; + } + + /* Debug registers are at the first 0x100 region + */ + ehci->caps = hcd->regs + 0x100; + + rv = usb_add_hcd(hcd, irq, 0); + if (rv == 0) { + device_wakeup_enable(hcd->self.controller); + return 0; + } + +err_irq: + usb_put_hcd(hcd); + + return rv; +} + +/** + * ehci_hcd_xilinx_of_remove - shutdown hcd and release resources + * @op: pointer to platform_device structure that is to be removed + * + * Remove the hcd structure, and release resources that has been requested + * during probe. + */ +static int ehci_hcd_xilinx_of_remove(struct platform_device *op) +{ + struct usb_hcd *hcd = platform_get_drvdata(op); + + dev_dbg(&op->dev, "stopping XILINX-OF USB Controller\n"); + + usb_remove_hcd(hcd); + + usb_put_hcd(hcd); + + return 0; +} + +static const struct of_device_id ehci_hcd_xilinx_of_match[] = { + {.compatible = "xlnx,xps-usb-host-1.00.a",}, + {}, +}; +MODULE_DEVICE_TABLE(of, ehci_hcd_xilinx_of_match); + +static struct platform_driver ehci_hcd_xilinx_of_driver = { + .probe = ehci_hcd_xilinx_of_probe, + .remove = ehci_hcd_xilinx_of_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "xilinx-of-ehci", + .of_match_table = ehci_hcd_xilinx_of_match, + }, +}; |