diff options
Diffstat (limited to 'drivers/usb/host/ohci-da8xx.c')
| -rw-r--r-- | drivers/usb/host/ohci-da8xx.c | 591 |
1 files changed, 591 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c new file mode 100644 index 000000000..a55cbba40 --- /dev/null +++ b/drivers/usb/host/ohci-da8xx.c @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * TI DA8xx (OMAP-L1x) Bus Glue + * + * Derived from: ohci-omap.c and ohci-s3c2410.c + * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_data/usb-davinci.h> +#include <linux/regulator/consumer.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <asm/unaligned.h> + +#include "ohci.h" + +#define DRIVER_DESC "DA8XX" +#define DRV_NAME "ohci-da8xx" + +static struct hc_driver __read_mostly ohci_da8xx_hc_driver; + +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength); +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); + +struct da8xx_ohci_hcd { + struct usb_hcd *hcd; + struct clk *usb11_clk; + struct phy *usb11_phy; + struct regulator *vbus_reg; + struct notifier_block nb; + unsigned int reg_enabled; +}; + +#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) + +/* Over-current indicator change bitmask */ +static volatile u16 ocic_mask; + +static int ohci_da8xx_enable(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + int ret; + + ret = clk_prepare_enable(da8xx_ohci->usb11_clk); + if (ret) + return ret; + + ret = phy_init(da8xx_ohci->usb11_phy); + if (ret) + goto err_phy_init; + + ret = phy_power_on(da8xx_ohci->usb11_phy); + if (ret) + goto err_phy_power_on; + + return 0; + +err_phy_power_on: + phy_exit(da8xx_ohci->usb11_phy); +err_phy_init: + clk_disable_unprepare(da8xx_ohci->usb11_clk); + + return ret; +} + +static void ohci_da8xx_disable(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + + phy_power_off(da8xx_ohci->usb11_phy); + phy_exit(da8xx_ohci->usb11_phy); + clk_disable_unprepare(da8xx_ohci->usb11_clk); +} + +static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + int ret; + + if (hub && hub->set_power) + return hub->set_power(1, on); + + if (!da8xx_ohci->vbus_reg) + return 0; + + if (on && !da8xx_ohci->reg_enabled) { + ret = regulator_enable(da8xx_ohci->vbus_reg); + if (ret) { + dev_err(dev, "Failed to enable regulator: %d\n", ret); + return ret; + } + da8xx_ohci->reg_enabled = 1; + + } else if (!on && da8xx_ohci->reg_enabled) { + ret = regulator_disable(da8xx_ohci->vbus_reg); + if (ret) { + dev_err(dev, "Failed to disable regulator: %d\n", ret); + return ret; + } + da8xx_ohci->reg_enabled = 0; + } + + return 0; +} + +static int ohci_da8xx_get_power(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + + if (hub && hub->get_power) + return hub->get_power(1); + + if (da8xx_ohci->vbus_reg) + return regulator_is_enabled(da8xx_ohci->vbus_reg); + + return 1; +} + +static int ohci_da8xx_get_oci(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + unsigned int flags; + int ret; + + if (hub && hub->get_oci) + return hub->get_oci(1); + + if (!da8xx_ohci->vbus_reg) + return 0; + + ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); + if (ret) + return ret; + + if (flags & REGULATOR_ERROR_OVER_CURRENT) + return 1; + + return 0; +} + +static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + + if (hub && hub->set_power) + return 1; + + if (da8xx_ohci->vbus_reg) + return 1; + + return 0; +} + +static int ohci_da8xx_has_oci(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + + if (hub && hub->get_oci) + return 1; + + if (da8xx_ohci->vbus_reg) + return 1; + + return 0; +} + +static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + + if (hub && hub->potpgt) + return 1; + + return 0; +} + +/* + * Handle the port over-current indicator change. + */ +static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, + unsigned port) +{ + ocic_mask |= 1 << port; + + /* Once over-current is detected, the port needs to be powered down */ + if (hub->get_oci(port) > 0) + hub->set_power(port, 0); +} + +static int ohci_da8xx_regulator_event(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct da8xx_ohci_hcd *da8xx_ohci = + container_of(nb, struct da8xx_ohci_hcd, nb); + + if (event & REGULATOR_EVENT_OVER_CURRENT) { + ocic_mask |= 1 << 1; + ohci_da8xx_set_power(da8xx_ohci->hcd, 0); + } + + return 0; +} + +static int ohci_da8xx_register_notify(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + int ret = 0; + + if (hub && hub->ocic_notify) { + ret = hub->ocic_notify(ohci_da8xx_ocic_handler); + } else if (da8xx_ohci->vbus_reg) { + da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; + ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, + &da8xx_ohci->nb); + } + + if (ret) + dev_err(dev, "Failed to register notifier: %d\n", ret); + + return ret; +} + +static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + + if (hub && hub->ocic_notify) + hub->ocic_notify(NULL); +} + +static int ohci_da8xx_reset(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + u32 rh_a; + + dev_dbg(dev, "starting USB controller\n"); + + result = ohci_da8xx_enable(hcd); + if (result < 0) + return result; + + /* + * DA8xx only have 1 port connected to the pins but the HC root hub + * register A reports 2 ports, thus we'll have to override it... + */ + ohci->num_ports = 1; + + result = ohci_setup(hcd); + if (result < 0) { + ohci_da8xx_disable(hcd); + return result; + } + + /* + * Since we're providing a board-specific root hub port power control + * and over-current reporting, we have to override the HC root hub A + * register's default value, so that ohci_hub_control() could return + * the correct hub descriptor... + */ + rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); + if (ohci_da8xx_has_set_power(hcd)) { + rh_a &= ~RH_A_NPS; + rh_a |= RH_A_PSM; + } + if (ohci_da8xx_has_oci(hcd)) { + rh_a &= ~RH_A_NOCP; + rh_a |= RH_A_OCPM; + } + if (ohci_da8xx_has_potpgt(hcd)) { + rh_a &= ~RH_A_POTPGT; + rh_a |= hub->potpgt << 24; + } + ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); + + return result; +} + +/* + * Update the status data from the hub with the over-current indicator change. + */ +static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + int length = orig_ohci_hub_status_data(hcd, buf); + + /* See if we have OCIC bit set on port 1 */ + if (ocic_mask & (1 << 1)) { + dev_dbg(hcd->self.controller, "over-current indicator change " + "on port 1\n"); + + if (!length) + length = 1; + + buf[0] |= 1 << 1; + } + return length; +} + +/* + * Look at the control requests to the root hub and see if we need to override. + */ +static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct device *dev = hcd->self.controller; + int temp; + + switch (typeReq) { + case GetPortStatus: + /* Check the port number */ + if (wIndex != 1) + break; + + dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); + + temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); + + /* The port power status (PPS) bit defaults to 1 */ + if (!ohci_da8xx_get_power(hcd)) + temp &= ~RH_PS_PPS; + + /* The port over-current indicator (POCI) bit is always 0 */ + if (ohci_da8xx_get_oci(hcd) > 0) + temp |= RH_PS_POCI; + + /* The over-current indicator change (OCIC) bit is 0 too */ + if (ocic_mask & (1 << wIndex)) + temp |= RH_PS_OCIC; + + put_unaligned(cpu_to_le32(temp), (__le32 *)buf); + return 0; + case SetPortFeature: + temp = 1; + goto check_port; + case ClearPortFeature: + temp = 0; + +check_port: + /* Check the port number */ + if (wIndex != 1) + break; + + switch (wValue) { + case USB_PORT_FEAT_POWER: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, "POWER"); + + return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, + "C_OVER_CURRENT"); + + if (temp) + ocic_mask |= 1 << wIndex; + else + ocic_mask &= ~(1 << wIndex); + return 0; + } + } + + return orig_ohci_hub_control(hcd, typeReq, wValue, + wIndex, buf, wLength); +} + +/*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OF +static const struct of_device_id da8xx_ohci_ids[] = { + { .compatible = "ti,da830-ohci" }, + { } +}; +MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); +#endif + +static int ohci_da8xx_probe(struct platform_device *pdev) +{ + struct da8xx_ohci_hcd *da8xx_ohci; + struct usb_hcd *hcd; + struct resource *mem; + int error, irq; + hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + da8xx_ohci = to_da8xx_ohci(hcd); + da8xx_ohci->hcd = hcd; + + da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(da8xx_ohci->usb11_clk)) { + error = PTR_ERR(da8xx_ohci->usb11_clk); + if (error != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get clock.\n"); + goto err; + } + + da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); + if (IS_ERR(da8xx_ohci->usb11_phy)) { + error = PTR_ERR(da8xx_ohci->usb11_phy); + if (error != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get phy.\n"); + goto err; + } + + da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); + if (IS_ERR(da8xx_ohci->vbus_reg)) { + error = PTR_ERR(da8xx_ohci->vbus_reg); + if (error == -ENODEV) { + da8xx_ohci->vbus_reg = NULL; + } else if (error == -EPROBE_DEFER) { + goto err; + } else { + dev_err(&pdev->dev, "Failed to get regulator\n"); + goto err; + } + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(hcd->regs)) { + error = PTR_ERR(hcd->regs); + goto err; + } + hcd->rsrc_start = mem->start; + hcd->rsrc_len = resource_size(mem); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + error = -ENODEV; + goto err; + } + + error = usb_add_hcd(hcd, irq, 0); + if (error) + goto err; + + device_wakeup_enable(hcd->self.controller); + + error = ohci_da8xx_register_notify(hcd); + if (error) + goto err_remove_hcd; + + return 0; + +err_remove_hcd: + usb_remove_hcd(hcd); +err: + usb_put_hcd(hcd); + return error; +} + +static int ohci_da8xx_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + ohci_da8xx_unregister_notify(hcd); + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_da8xx_suspend(struct platform_device *pdev, + pm_message_t message) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret; + + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + + ohci_da8xx_disable(hcd); + hcd->state = HC_STATE_SUSPENDED; + + return ret; +} + +static int ohci_da8xx_resume(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ret = ohci_da8xx_enable(hcd); + if (ret) + return ret; + + ohci_resume(hcd, false); + + return 0; +} +#endif + +static const struct ohci_driver_overrides da8xx_overrides __initconst = { + .reset = ohci_da8xx_reset, + .extra_priv_size = sizeof(struct da8xx_ohci_hcd), +}; + +/* + * Driver definition to register with platform structure. + */ +static struct platform_driver ohci_hcd_da8xx_driver = { + .probe = ohci_da8xx_probe, + .remove = ohci_da8xx_remove, + .shutdown = usb_hcd_platform_shutdown, +#ifdef CONFIG_PM + .suspend = ohci_da8xx_suspend, + .resume = ohci_da8xx_resume, +#endif + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(da8xx_ohci_ids), + }, +}; + +static int __init ohci_da8xx_init(void) +{ + + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); + ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); + + /* + * The Davinci da8xx HW has some unusual quirks, which require + * da8xx-specific workarounds. We override certain hc_driver + * functions here to achieve that. We explicitly do not enhance + * ohci_driver_overrides to allow this more easily, since this + * is an unusual case, and we don't want to encourage others to + * override these functions by making it too easy. + */ + + orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; + orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; + + ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data; + ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control; + + return platform_driver_register(&ohci_hcd_da8xx_driver); +} +module_init(ohci_da8xx_init); + +static void __exit ohci_da8xx_exit(void) +{ + platform_driver_unregister(&ohci_hcd_da8xx_driver); +} +module_exit(ohci_da8xx_exit); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); |