diff options
Diffstat (limited to 'drivers/usb/host/xhci-mtk.h')
| -rw-r--r-- | drivers/usb/host/xhci-mtk.h | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h new file mode 100644 index 000000000..1601ca9a3 --- /dev/null +++ b/drivers/usb/host/xhci-mtk.h @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: + * Zhigang.Wei <zhigang.wei@mediatek.com> + * Chunfeng.Yun <chunfeng.yun@mediatek.com> + */ + +#ifndef _XHCI_MTK_H_ +#define _XHCI_MTK_H_ + +#include "xhci.h" + +/** + * To simplify scheduler algorithm, set a upper limit for ESIT, + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, + * round down to the limit value, that means allocating more + * bandwidth to it. + */ +#define XHCI_MTK_MAX_ESIT 64 + +/** + * struct mu3h_sch_bw_info: schedule information for bandwidth domain + * + * @bus_bw: array to keep track of bandwidth already used at each uframes + * @bw_ep_list: eps in the bandwidth domain + * + * treat a HS root port as a bandwidth domain, but treat a SS root port as + * two bandwidth domains, one for IN eps and another for OUT eps. + */ +struct mu3h_sch_bw_info { + u32 bus_bw[XHCI_MTK_MAX_ESIT]; + struct list_head bw_ep_list; +}; + +/** + * struct mu3h_sch_ep_info: schedule information for endpoint + * + * @esit: unit is 125us, equal to 2 << Interval field in ep-context + * @num_budget_microframes: number of continuous uframes + * (@repeat==1) scheduled within the interval + * @bw_cost_per_microframe: bandwidth cost per microframe + * @endpoint: linked into bandwidth domain which it belongs to + * @ep: address of usb_host_endpoint struct + * @offset: which uframe of the interval that transfer should be + * scheduled first time within the interval + * @repeat: the time gap between two uframes that transfers are + * scheduled within a interval. in the simple algorithm, only + * assign 0 or 1 to it; 0 means using only one uframe in a + * interval, and 1 means using @num_budget_microframes + * continuous uframes + * @pkts: number of packets to be transferred in the scheduled uframes + * @cs_count: number of CS that host will trigger + * @burst_mode: burst mode for scheduling. 0: normal burst mode, + * distribute the bMaxBurst+1 packets for a single burst + * according to @pkts and @repeat, repeate the burst multiple + * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets + * according to @pkts and @repeat. normal mode is used by + * default + */ +struct mu3h_sch_ep_info { + u32 esit; + u32 num_budget_microframes; + u32 bw_cost_per_microframe; + struct list_head endpoint; + void *ep; + /* + * mtk xHCI scheduling information put into reserved DWs + * in ep context + */ + u32 offset; + u32 repeat; + u32 pkts; + u32 cs_count; + u32 burst_mode; +}; + +#define MU3C_U3_PORT_MAX 4 +#define MU3C_U2_PORT_MAX 5 + +/** + * struct mu3c_ippc_regs: MTK ssusb ip port control registers + * @ip_pw_ctr0~3: ip power and clock control registers + * @ip_pw_sts1~2: ip power and clock status registers + * @ip_xhci_cap: ip xHCI capability register + * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used + * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used + * @u2_phy_pll: usb2 phy pll control register + */ +struct mu3c_ippc_regs { + __le32 ip_pw_ctr0; + __le32 ip_pw_ctr1; + __le32 ip_pw_ctr2; + __le32 ip_pw_ctr3; + __le32 ip_pw_sts1; + __le32 ip_pw_sts2; + __le32 reserved0[3]; + __le32 ip_xhci_cap; + __le32 reserved1[2]; + __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; + __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; + __le32 reserved2; + __le32 u2_phy_pll; + __le32 reserved3[33]; /* 0x80 ~ 0xff */ +}; + +struct xhci_hcd_mtk { + struct device *dev; + struct usb_hcd *hcd; + struct mu3h_sch_bw_info *sch_array; + struct mu3c_ippc_regs __iomem *ippc_regs; + bool has_ippc; + int num_u2_ports; + int num_u3_ports; + int u3p_dis_msk; + struct regulator *vusb33; + struct regulator *vbus; + struct clk *sys_clk; /* sys and mac clock */ + struct clk *ref_clk; + struct clk *mcu_clk; + struct clk *dma_clk; + struct regmap *pericfg; + struct phy **phys; + int num_phys; + bool lpm_support; + bool u2_lpm_disable; + /* usb remote wakeup */ + bool uwk_en; + struct regmap *uwk; + u32 uwk_reg_base; + u32 uwk_vers; +}; + +static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) +{ + return dev_get_drvdata(hcd->self.controller); +} + +#if IS_ENABLED(CONFIG_USB_XHCI_MTK) +int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); +void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep); +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep); + +#else +static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, + struct usb_device *udev, struct usb_host_endpoint *ep) +{ + return 0; +} + +static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, + struct usb_device *udev, struct usb_host_endpoint *ep) +{ +} + +#endif + +#endif /* _XHCI_MTK_H_ */ |