diff options
Diffstat (limited to 'drivers/usb/serial/f81232.c')
| -rw-r--r-- | drivers/usb/serial/f81232.c | 729 |
1 files changed, 729 insertions, 0 deletions
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c new file mode 100644 index 000000000..087e5f165 --- /dev/null +++ b/drivers/usb/serial/f81232.c @@ -0,0 +1,729 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Fintek F81232 USB to serial adaptor driver + * + * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) + * Copyright (C) 2012 Linux Foundation + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial_reg.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x1934, 0x0706) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* Maximum baudrate for F81232 */ +#define F81232_MAX_BAUDRATE 115200 + +/* USB Control EP parameter */ +#define F81232_REGISTER_REQUEST 0xa0 +#define F81232_GET_REGISTER 0xc0 +#define F81232_SET_REGISTER 0x40 + +#define SERIAL_BASE_ADDRESS 0x0120 +#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) +#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) +#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) +#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) +#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) +#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) + +struct f81232_private { + struct mutex lock; + u8 modem_control; + u8 modem_status; + struct work_struct interrupt_work; + struct usb_serial_port *port; +}; + +static int calc_baud_divisor(speed_t baudrate) +{ + return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate); +} + +static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(*val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + status = usb_control_msg(dev, + usb_rcvctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_GET_REGISTER, + reg, + 0, + tmp, + sizeof(*val), + USB_CTRL_GET_TIMEOUT); + if (status != sizeof(*val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + *val = *tmp; + } + + kfree(tmp); + return status; +} + +static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + *tmp = val; + + status = usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_SET_REGISTER, + reg, + 0, + tmp, + sizeof(val), + USB_CTRL_SET_TIMEOUT); + if (status != sizeof(val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + } + + kfree(tmp); + return status; +} + +static void f81232_read_msr(struct usb_serial_port *port) +{ + int status; + u8 current_msr; + struct tty_struct *tty; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + status = f81232_get_register(port, MODEM_STATUS_REGISTER, + ¤t_msr); + if (status) { + dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); + mutex_unlock(&priv->lock); + return; + } + + if (!(current_msr & UART_MSR_ANY_DELTA)) { + mutex_unlock(&priv->lock); + return; + } + + priv->modem_status = current_msr; + + if (current_msr & UART_MSR_DCTS) + port->icount.cts++; + if (current_msr & UART_MSR_DDSR) + port->icount.dsr++; + if (current_msr & UART_MSR_TERI) + port->icount.rng++; + if (current_msr & UART_MSR_DDCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + current_msr & UART_MSR_DCD); + + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + mutex_unlock(&priv->lock); +} + +static int f81232_set_mctrl(struct usb_serial_port *port, + unsigned int set, unsigned int clear) +{ + u8 val; + int status; + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) + return 0; /* no change */ + + /* 'set' takes precedence over 'clear' */ + clear &= ~set; + + /* force enable interrupt with OUT2 */ + mutex_lock(&priv->lock); + val = UART_MCR_OUT2 | priv->modem_control; + + if (clear & TIOCM_DTR) + val &= ~UART_MCR_DTR; + + if (clear & TIOCM_RTS) + val &= ~UART_MCR_RTS; + + if (set & TIOCM_DTR) + val |= UART_MCR_DTR; + + if (set & TIOCM_RTS) + val |= UART_MCR_RTS; + + dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, + val, priv->modem_control); + + status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s set MCR status < 0\n", __func__); + mutex_unlock(&priv->lock); + return status; + } + + priv->modem_control = val; + mutex_unlock(&priv->lock); + + return 0; +} + +static void f81232_update_line_status(struct usb_serial_port *port, + unsigned char *data, + size_t actual_length) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (!actual_length) + return; + + switch (data[0] & 0x07) { + case 0x00: /* msr change */ + dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); + schedule_work(&priv->interrupt_work); + break; + case 0x02: /* tx-empty */ + break; + case 0x04: /* rx data available */ + break; + case 0x06: /* lsr change */ + /* we can forget it. the LSR will read from bulk-in */ + dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); + break; + } +} + +static void f81232_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status = urb->status; + int retval; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + f81232_update_line_status(port, data, actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + +static void f81232_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + char tty_flag; + unsigned int i; + u8 lsr; + + /* + * When opening the port we get a 1-byte packet with the current LSR, + * which we discard. + */ + if ((urb->actual_length < 2) || (urb->actual_length % 2)) + return; + + /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ + + for (i = 0; i < urb->actual_length; i += 2) { + tty_flag = TTY_NORMAL; + lsr = data[i]; + + if (lsr & UART_LSR_BRK_ERROR_BITS) { + if (lsr & UART_LSR_BI) { + tty_flag = TTY_BREAK; + port->icount.brk++; + usb_serial_handle_break(port); + } else if (lsr & UART_LSR_PE) { + tty_flag = TTY_PARITY; + port->icount.parity++; + } else if (lsr & UART_LSR_FE) { + tty_flag = TTY_FRAME; + port->icount.frame++; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + } + + if (port->port.console && port->sysrq) { + if (usb_serial_handle_sysrq_char(port, data[i + 1])) + continue; + } + + tty_insert_flip_char(&port->port, data[i + 1], tty_flag); + } + + tty_flip_buffer_push(&port->port); +} + +static void f81232_break_ctl(struct tty_struct *tty, int break_state) +{ + /* FIXME - Stubbed out for now */ + + /* + * break_state = -1 to turn on break, and 0 to turn off break + * see drivers/char/tty_io.c to see it used. + * last_set_data_urb_value NEVER has the break bit set in it. + */ +} + +static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate) +{ + u8 lcr; + int divisor; + int status = 0; + + divisor = calc_baud_divisor(baudrate); + + status = f81232_get_register(port, LINE_CONTROL_REGISTER, + &lcr); /* get LCR */ + if (status) { + dev_err(&port->dev, "%s failed to get LCR: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr | UART_LCR_DLAB); /* Enable DLAB */ + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, + divisor & 0x00ff); /* low */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", + __func__, status); + goto reapply_lcr; + } + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + (divisor & 0xff00) >> 8); /* high */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", + __func__, status); + } + +reapply_lcr: + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr & ~UART_LCR_DLAB); + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + } +} + +static int f81232_port_enable(struct usb_serial_port *port) +{ + u8 val; + int status; + + /* fifo on, trigger8, clear TX/RX*/ + val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT; + + status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s failed to set FCR: %d\n", + __func__, status); + return status; + } + + /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + UART_IER_MSI); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static int f81232_port_disable(struct usb_serial_port *port) +{ + int status; + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static void f81232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u8 new_lcr = 0; + int status = 0; + speed_t baudrate; + + /* Don't change anything if nothing has changed */ + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + if (C_BAUD(tty) == B0) + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + + baudrate = tty_get_baud_rate(tty); + if (baudrate > 0) { + if (baudrate > F81232_MAX_BAUDRATE) { + baudrate = F81232_MAX_BAUDRATE; + tty_encode_baud_rate(tty, baudrate, baudrate); + } + f81232_set_baudrate(port, baudrate); + } + + if (C_PARENB(tty)) { + new_lcr |= UART_LCR_PARITY; + + if (!C_PARODD(tty)) + new_lcr |= UART_LCR_EPAR; + + if (C_CMSPAR(tty)) + new_lcr |= UART_LCR_SPAR; + } + + if (C_CSTOPB(tty)) + new_lcr |= UART_LCR_STOP; + + switch (C_CSIZE(tty)) { + case CS5: + new_lcr |= UART_LCR_WLEN5; + break; + case CS6: + new_lcr |= UART_LCR_WLEN6; + break; + case CS7: + new_lcr |= UART_LCR_WLEN7; + break; + default: + case CS8: + new_lcr |= UART_LCR_WLEN8; + break; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); + if (status) { + dev_err(&port->dev, "%s failed to set LCR: %d\n", + __func__, status); + } +} + +static int f81232_tiocmget(struct tty_struct *tty) +{ + int r; + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + u8 mcr, msr; + + /* force get current MSR changed state */ + f81232_read_msr(port); + + mutex_lock(&port_priv->lock); + mcr = port_priv->modem_control; + msr = port_priv->modem_status; + mutex_unlock(&port_priv->lock); + + r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | + (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | + (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | + (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | + (msr & UART_MSR_RI ? TIOCM_RI : 0) | + (msr & UART_MSR_DSR ? TIOCM_DSR : 0); + + return r; +} + +static int f81232_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + + return f81232_set_mctrl(port, set, clear); +} + +static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result; + + result = f81232_port_enable(port); + if (result) + return result; + + /* Setup termios */ + if (tty) + f81232_set_termios(tty, port, NULL); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __func__, result); + return result; + } + + result = usb_serial_generic_open(tty, port); + if (result) { + usb_kill_urb(port->interrupt_in_urb); + return result; + } + + return 0; +} + +static void f81232_close(struct usb_serial_port *port) +{ + struct f81232_private *port_priv = usb_get_serial_port_data(port); + + f81232_port_disable(port); + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); + flush_work(&port_priv->interrupt_work); +} + +static void f81232_dtr_rts(struct usb_serial_port *port, int on) +{ + if (on) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + else + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); +} + +static int f81232_carrier_raised(struct usb_serial_port *port) +{ + u8 msr; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + msr = priv->modem_status; + mutex_unlock(&priv->lock); + + if (msr & UART_MSR_DCD) + return 1; + return 0; +} + +static int f81232_get_serial_info(struct usb_serial_port *port, + unsigned long arg) +{ + struct serial_struct ser; + + memset(&ser, 0, sizeof(ser)); + + ser.type = PORT_16550A; + ser.line = port->minor; + ser.port = port->port_number; + ser.baud_base = F81232_MAX_BAUDRATE; + + if (copy_to_user((void __user *)arg, &ser, sizeof(ser))) + return -EFAULT; + + return 0; +} + +static int f81232_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + return f81232_get_serial_info(port, arg); + default: + break; + } + return -ENOIOCTLCMD; +} + +static void f81232_interrupt_work(struct work_struct *work) +{ + struct f81232_private *priv = + container_of(work, struct f81232_private, interrupt_work); + + f81232_read_msr(priv->port); +} + +static int f81232_port_probe(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + priv->port = port; + + return 0; +} + +static int f81232_port_remove(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int f81232_suspend(struct usb_serial *serial, pm_message_t message) +{ + struct usb_serial_port *port = serial->port[0]; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_kill_urb(port->read_urbs[i]); + + usb_kill_urb(port->interrupt_in_urb); + + if (port_priv) + flush_work(&port_priv->interrupt_work); + + return 0; +} + +static int f81232_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port = serial->port[0]; + int result; + + if (tty_port_initialized(&port->port)) { + result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (result) { + dev_err(&port->dev, "submit interrupt urb failed: %d\n", + result); + return result; + } + } + + return usb_serial_generic_resume(serial); +} + +static struct usb_serial_driver f81232_device = { + .driver = { + .owner = THIS_MODULE, + .name = "f81232", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = f81232_open, + .close = f81232_close, + .dtr_rts = f81232_dtr_rts, + .carrier_raised = f81232_carrier_raised, + .ioctl = f81232_ioctl, + .break_ctl = f81232_break_ctl, + .set_termios = f81232_set_termios, + .tiocmget = f81232_tiocmget, + .tiocmset = f81232_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .process_read_urb = f81232_process_read_urb, + .read_int_callback = f81232_read_int_callback, + .port_probe = f81232_port_probe, + .port_remove = f81232_port_remove, + .suspend = f81232_suspend, + .resume = f81232_resume, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &f81232_device, + NULL, +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); +MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); +MODULE_LICENSE("GPL v2"); |