diff options
Diffstat (limited to '')
32 files changed, 192 insertions, 39 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 169ccfacf..3bda856ff 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -920,6 +920,9 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) struct ci_hdrc *ci = req->context; unsigned long flags; + if (req->status < 0) + return; + if (ci->setaddr) { hw_usb_set_address(ci, ci->address); ci->setaddr = false; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0522bd2d9..e927631c7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1883,6 +1883,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ }, + { USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index df661460e..59d5d506d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1805,7 +1805,6 @@ static void usb_giveback_urb_bh(unsigned long param) spin_lock_irq(&bh->lock); bh->running = true; - restart: list_replace_init(&bh->head, &local_list); spin_unlock_irq(&bh->lock); @@ -1819,10 +1818,17 @@ static void usb_giveback_urb_bh(unsigned long param) bh->completing_ep = NULL; } - /* check if there are new URBs to giveback */ + /* + * giveback new URBs next time to prevent this function + * from not exiting for a long time. + */ spin_lock_irq(&bh->lock); - if (!list_empty(&bh->head)) - goto restart; + if (!list_empty(&bh->head)) { + if (bh->high_prio) + tasklet_hi_schedule(&bh->bh); + else + tasklet_schedule(&bh->bh); + } bh->running = false; spin_unlock_irq(&bh->lock); } @@ -1847,7 +1853,7 @@ static void usb_giveback_urb_bh(unsigned long param) void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) { struct giveback_urb_bh *bh; - bool running, high_prio_bh; + bool running; /* pass status to tasklet via unlinked */ if (likely(!urb->unlinked)) @@ -1858,13 +1864,10 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) return; } - if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) { + if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) bh = &hcd->high_prio_bh; - high_prio_bh = true; - } else { + else bh = &hcd->low_prio_bh; - high_prio_bh = false; - } spin_lock(&bh->lock); list_add_tail(&urb->urb_list, &bh->head); @@ -1873,7 +1876,7 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) if (running) ; - else if (high_prio_bh) + else if (bh->high_prio) tasklet_hi_schedule(&bh->bh); else tasklet_schedule(&bh->bh); @@ -2881,6 +2884,7 @@ int usb_add_hcd(struct usb_hcd *hcd, /* initialize tasklets */ init_giveback_urb_bh(&hcd->high_prio_bh); + hcd->high_prio_bh.high_prio = true; init_giveback_urb_bh(&hcd->low_prio_bh); /* enable irqs just before we start the controller, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 29cc2aa5a..d1a7f22cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5851,6 +5851,11 @@ re_enumerate_no_bos: * the reset is over (using their post_reset method). * * Return: The same as for usb_reset_and_verify_device(). + * However, if a reset is already in progress (for instance, if a + * driver doesn't have pre_reset() or post_reset() callbacks, and while + * being unbound or re-bound during the ongoing reset its disconnect() + * or probe() routine tries to perform a second, nested reset), the + * routine returns -EINPROGRESS. * * Note: * The caller must own the device lock. For example, it's safe to use @@ -5884,6 +5889,10 @@ int usb_reset_device(struct usb_device *udev) return -EISDIR; } + if (udev->reset_in_progress) + return -EINPROGRESS; + udev->reset_in_progress = 1; + port_dev = hub->ports[udev->portnum - 1]; /* @@ -5948,6 +5957,7 @@ int usb_reset_device(struct usb_device *udev) usb_autosuspend_device(udev); memalloc_noio_restore(noio_flag); + udev->reset_in_progress = 0; return ret; } EXPORT_SYMBOL_GPL(usb_reset_device); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index a9e86f5e6..4f3099496 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -142,9 +142,9 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) } else if (hsotg->plat && hsotg->plat->phy_init) { ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); } else { - ret = phy_power_on(hsotg->phy); + ret = phy_init(hsotg->phy); if (ret == 0) - ret = phy_init(hsotg->phy); + ret = phy_power_on(hsotg->phy); } return ret; @@ -176,9 +176,9 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) } else if (hsotg->plat && hsotg->plat->phy_exit) { ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } else { - ret = phy_exit(hsotg->phy); + ret = phy_power_off(hsotg->phy); if (ret == 0) - ret = phy_power_off(hsotg->phy); + ret = phy_exit(hsotg->phy); } if (ret) return ret; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 984faecdd..465aabb6e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -673,15 +673,16 @@ static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); - phy_power_off(dwc->usb2_generic_phy); - phy_power_off(dwc->usb3_generic_phy); clk_bulk_disable(dwc->num_clks, dwc->clks); clk_bulk_unprepare(dwc->num_clks, dwc->clks); reset_control_assert(dwc->reset); @@ -1509,16 +1510,16 @@ err5: dwc3_debugfs_exit(dwc); dwc3_event_buffers_cleanup(dwc); - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); - usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + dwc3_ulpi_exit(dwc); err4: diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 527938eee..955bf820f 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -36,6 +36,11 @@ #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0 #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee +#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e +#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee +#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee +#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -144,7 +149,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) if (pdev->vendor == PCI_VENDOR_ID_INTEL) { if (pdev->device == PCI_DEVICE_ID_INTEL_BXT || - pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) { + pdev->device == PCI_DEVICE_ID_INTEL_BXT_M || + pdev->device == PCI_DEVICE_ID_INTEL_EHLLP) { guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid); dwc->has_dsm_for_pm = true; } @@ -351,6 +357,21 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 5bb5384f3..9d5320562 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -173,6 +173,14 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) return 0; } +/* Only usable in contexts where the role can not change. */ +static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + + return dwc->xhci; +} + static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { if (qcom->hs_phy_irq) { @@ -280,7 +288,11 @@ static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) if (qcom->pm_suspended) return IRQ_HANDLED; - if (dwc->xhci) + /* + * This is safe as role switching is done from a freezable workqueue + * and the wakeup interrupts are disabled as part of resume. + */ + if (dwc3_qcom_is_host(qcom)) pm_runtime_resume(&dwc->xhci->dev); return IRQ_HANDLED; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 8be95ca95..3c8ec1c07 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3187,7 +3187,6 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt) } evt->count = 0; - evt->flags &= ~DWC3_EVENT_PENDING; ret = IRQ_HANDLED; /* Unmask interrupt */ @@ -3200,6 +3199,9 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt) dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval); } + /* Keep the clearing of DWC3_EVENT_PENDING at the end */ + evt->flags &= ~DWC3_EVENT_PENDING; + return ret; } diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 1a3878a3b..124e9f80d 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -142,4 +142,5 @@ void dwc3_host_exit(struct dwc3 *dwc) phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy", dev_name(dwc->dev)); platform_device_unregister(dwc->xhci); + dwc->xhci = NULL; } diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index f7e6c4255..021984921 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -294,8 +294,10 @@ EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub); void store_cdrom_address(u8 *dest, int msf, u32 addr) { if (msf) { - /* Convert to Minutes-Seconds-Frames */ - addr >>= 2; /* Convert to 2048-byte frames */ + /* + * Convert to Minutes-Seconds-Frames. + * Sector size is already set to 2048 bytes. + */ addr += 2*75; /* Lead-in occupies 2 seconds */ dest[3] = addr % 75; /* Frames */ addr /= 75; diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 3ebcbd199..b0a2b8805 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -361,6 +361,7 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len) spin_unlock_irq (&epdata->dev->lock); DBG (epdata->dev, "endpoint gone\n"); + wait_for_completion(&done); epdata->status = -ENODEV; } } diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index d83d93c6e..33b5648b2 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -309,7 +309,7 @@ source "drivers/usb/gadget/udc/bdc/Kconfig" config USB_AMD5536UDC tristate "AMD5536 UDC" - depends on USB_PCI + depends on USB_PCI && HAS_DMA select USB_SNP_CORE help The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 576f7d79a..d1dc644b2 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -148,6 +148,7 @@ static int ehci_hcd_ppc_of_probe(struct platform_device *op) } else { ehci->has_amcc_usb23 = 1; } + of_node_put(np); } if (of_get_property(dn, "big-endian", NULL)) { diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f5f532601..a964a93ff 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -153,6 +153,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) } isp1301_i2c_client = isp1301_get_client(isp1301_node); + of_node_put(isp1301_node); if (!isp1301_i2c_client) return -EPROBE_DEFER; diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 76a9b40b0..96c5c7655 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -169,6 +169,7 @@ static int ohci_hcd_ppc_of_probe(struct platform_device *op) release_mem_region(res.start, 0x4); } else pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__); + of_node_put(np); } irq_dispose_mapping(irq); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 1bb48e534..b5a18817c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1464,6 +1464,17 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = bus_state->resuming_ports; + /* + * SS devices are only visible to roothub after link training completes. + * Keep polling roothubs for a grace period after xHC start + */ + if (xhci->run_graceperiod) { + if (time_before(jiffies, xhci->run_graceperiod)) + status = 1; + else + xhci->run_graceperiod = 0; + } + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; /* For each port, did anything change? If so, set that bit in buf. */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index a9e72fee8..7fef6d9ed 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -149,9 +149,11 @@ int xhci_start(struct xhci_hcd *xhci) xhci_err(xhci, "Host took too long to start, " "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); - if (!ret) + if (!ret) { /* clear state flags. Including dying, halted or removing */ xhci->xhc_state = 0; + xhci->run_graceperiod = jiffies + msecs_to_jiffies(500); + } return ret; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3e6cb257f..029ffcb13 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1811,7 +1811,7 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; - + unsigned long run_graceperiod; u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c index 5b287257e..04eeaf6a0 100644 --- a/drivers/usb/renesas_usbhs/rza.c +++ b/drivers/usb/renesas_usbhs/rza.c @@ -23,6 +23,10 @@ static int usbhs_rza1_hardware_init(struct platform_device *pdev) extal_clk = of_find_node_by_name(NULL, "extal"); of_property_read_u32(usb_x1_clk, "clock-frequency", &freq_usb); of_property_read_u32(extal_clk, "clock-frequency", &freq_extal); + + of_node_put(usb_x1_clk); + of_node_put(extal_clk); + if (freq_usb == 0) { if (freq_extal == 12000000) { /* Select 12MHz XTAL */ diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index f789b60ed..7eabb1bfa 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -96,6 +96,8 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + + u8 version; }; static void ch341_set_termios(struct tty_struct *tty, @@ -174,13 +176,20 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, /* * CH341A buffers data until a full endpoint-size packet (32 bytes) * has been received unless bit 7 is set. + * + * At least one device with version 0x27 appears to have this bit + * inverted. */ - a |= BIT(7); + if (priv->version > 0x27) + a |= BIT(7); r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a); if (r) return r; + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr); if (r) return r; @@ -232,7 +241,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r < 0) goto out; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version); r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 95a5c73f3..c7c6d5d1d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -131,6 +131,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d966836e7..623b54a5c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1013,6 +1013,9 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, + /* Belimo Automation devices */ + { USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) }, + { USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) }, /* ICP DAS I-756xU devices */ { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) }, { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) }, @@ -1032,6 +1035,8 @@ static const struct usb_device_id id_table_combined[] = { /* IDS GmbH devices */ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) }, { USB_DEVICE(IDS_VID, IDS_CM31A_PID) }, + /* Omron devices */ + { USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) }, /* U-Blox devices */ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index d1a956469..31c8ccabb 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -662,6 +662,12 @@ #define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */ /* + * Omron corporation (https://www.omron.com) + */ + #define OMRON_VID 0x0590 + #define OMRON_CS1W_CIF31_PID 0x00b2 + +/* * Acton Research Corp. */ #define ACTON_VID 0x0647 /* Vendor ID */ @@ -1569,6 +1575,12 @@ #define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */ /* + * Belimo Automation + */ +#define BELIMO_ZTH_PID 0x8050 +#define BELIMO_ZIP_PID 0xC811 + +/* * Unjo AB */ #define UNJO_VID 0x22B7 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4f99818ca..560e62891 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -252,10 +252,14 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 +#define QUECTEL_PRODUCT_EM05G 0x030a +#define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 +#define QUECTEL_PRODUCT_RM500K 0x7001 #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -436,6 +440,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_MV31_2_RMNET 0x00b9 #define CINTERION_PRODUCT_MV32_WA 0x00f1 #define CINTERION_PRODUCT_MV32_WB 0x00f2 +#define CINTERION_PRODUCT_MV32_WA_RMNET 0x00f3 +#define CINTERION_PRODUCT_MV32_WB_RMNET 0x00f4 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -571,6 +577,10 @@ static void option_instat_callback(struct urb *urb); #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803 +/* OPPO products */ +#define OPPO_VENDOR_ID 0x22d9 +#define OPPO_PRODUCT_R11 0x276c + /* Device flags */ @@ -1129,11 +1139,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), + .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, @@ -1145,8 +1162,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, @@ -1279,6 +1300,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff), /* Telit LE910Cx (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x1250, 0xff, 0x00, 0x00) }, /* Telit LE910Cx (rmnet) */ { USB_DEVICE(TELIT_VENDOR_ID, 0x1260), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE(TELIT_VENDOR_ID, 0x1261), @@ -1987,8 +2009,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0)}, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), @@ -2149,6 +2175,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index a43263a0e..891e52bc5 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -757,7 +757,8 @@ static void sierra_close(struct usb_serial_port *port) /* * Need to take susp_lock to make sure port is not already being - * resumed, but no need to hold it due to initialized + * resumed, but no need to hold it due to the tty-port initialized + * flag. */ spin_lock_irq(&intfdata->susp_lock); if (--intfdata->open_ports == 0) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b1f0aa12b..eb4f20651 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -251,7 +251,7 @@ static int serial_open(struct tty_struct *tty, struct file *filp) * * Shut down a USB serial port. Serialized against activate by the * tport mutex and kept to matching open/close pairs - * of calls by the initialized flag. + * of calls by the tty-port initialized flag. * * Not called if tty is console. */ diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 997ff88ec..2ebf0842f 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -463,7 +463,8 @@ void usb_wwan_close(struct usb_serial_port *port) /* * Need to take susp_lock to make sure port is not already being - * resumed, but no need to hold it due to initialized + * resumed, but no need to hold it due to the tty-port initialized + * flag. */ spin_lock_irq(&intfdata->susp_lock); if (--intfdata->open_ports == 0) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 66e7f5d12..6a59950a6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2294,6 +2294,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), +/* Reported by Witold Lipieta <witold.lipieta@thaumatec.com> */ +UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100, + "NXP Semiconductors", + "PN7462AU", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Supplied with some Castlewood ORB removable drives */ UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999, "Double-H Technology", diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2f72753c3..0b37c8e55 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -62,6 +62,13 @@ UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), +/* Reported-by: Tom Hu <huxiaoying@kylinos.cn> */ +UNUSUAL_DEV(0x0b05, 0x1932, 0x0000, 0x9999, + "ASUS", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: David Webb <djw@noc.ac.uk> */ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, "Seagate", diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 3f06e9477..52cdc06e1 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -91,8 +91,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) case DP_STATUS_CON_UFP_D: case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ conf |= DP_CONF_UFP_U_AS_UFP_D; - pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) & - DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo); + pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & + DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); break; default: break; diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 8dae6ff23..2ede329ce 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1377,6 +1377,7 @@ void typec_set_pwr_opmode(struct typec_port *port, partner->usb_pd = 1; sysfs_notify(&partner_dev->kobj, NULL, "supports_usb_power_delivery"); + kobject_uevent(&partner_dev->kobj, KOBJ_CHANGE); } put_device(partner_dev); } |