diff options
Diffstat (limited to '')
36 files changed, 311 insertions, 179 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 619e80783..898df2e43 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -147,6 +147,10 @@ int usb_device_supports_lpm(struct usb_device *udev) if (udev->quirks & USB_QUIRK_NO_LPM) return 0; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -323,6 +327,10 @@ static void usb_set_lpm_parameters(struct usb_device *udev) if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) return; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + hub = usb_hub_to_struct_hub(udev->parent); /* It doesn't take time to transition the roothub into U0, since it * doesn't have an upstream link. @@ -2644,7 +2652,8 @@ out_authorized: } /* - * Return 1 if port speed is SuperSpeedPlus, 0 otherwise + * Return 1 if port speed is SuperSpeedPlus, 0 otherwise or if the + * capability couldn't be checked. * check it from the link protocol field of the current speed ID attribute. * current speed ID is got from ext port status request. Sublink speed attribute * table is returned with the hub BOS SSP device capability descriptor @@ -2654,8 +2663,12 @@ static int port_speed_is_ssp(struct usb_device *hdev, int speed_id) int ssa_count; u32 ss_attr; int i; - struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap; + struct usb_ssp_cap_descriptor *ssp_cap; + if (!hdev->bos) + return 0; + + ssp_cap = hdev->bos->ssp_cap; if (!ssp_cap) return 0; @@ -4057,8 +4070,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout, ret; - __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; - __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + __u8 u1_mel; + __le16 u2_mel; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + u1_mel = udev->bos->ss_cap->bU1devExitLat; + u2_mel = udev->bos->ss_cap->bU2DevExitLat; /* If the device says it doesn't have *any* exit latency to come out of * U1 or U2, it's probably lying. Assume it doesn't implement that link diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index df3aa0b69..d1845e5ff 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -139,7 +139,7 @@ static inline int hub_is_superspeedplus(struct usb_device *hdev) { return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS && le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 && - hdev->bos->ssp_cap); + hdev->bos && hdev->bos->ssp_cap); } static inline unsigned hub_power_on_good_delay(struct usb_hub *hub) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 1346c600e..48cda9b7a 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -437,6 +437,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* novation SoundControl XL */ { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Focusrite Scarlett Solo USB */ + { USB_DEVICE(0x1235, 0x8211), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + /* Huawei 4G LTE module */ { USB_DEVICE(0x12d1, 0x15bb), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index cfda88318..91fa83132 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4845,8 +4845,8 @@ fail3: if (qh_allocated && qh->channel && qh->channel->qh == qh) qh->channel->qh = NULL; fail2: - spin_unlock_irqrestore(&hsotg->lock, flags); urb->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); kfree(qtd); qtd = NULL; fail1: diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index d5f4ec1b7..08e2792cb 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -2045,15 +2045,17 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) { struct dwc2_qtd *qtd; struct dwc2_host_chan *chan; - u32 hcint, hcintmsk; + u32 hcint, hcintraw, hcintmsk; chan = hsotg->hc_ptr_array[chnum]; - hcint = dwc2_readl(hsotg, HCINT(chnum)); + hcintraw = dwc2_readl(hsotg, HCINT(chnum)); hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum)); + hcint = hcintraw & hcintmsk; + dwc2_writel(hsotg, hcint, HCINT(chnum)); + if (!chan) { dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n"); - dwc2_writel(hsotg, hcint, HCINT(chnum)); return; } @@ -2062,11 +2064,9 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) chnum); dev_vdbg(hsotg->dev, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", - hcint, hcintmsk, hcint & hcintmsk); + hcintraw, hcintmsk, hcint); } - dwc2_writel(hsotg, hcint, HCINT(chnum)); - /* * If we got an interrupt after someone called * dwc2_hcd_endpoint_disable() we don't want to crash below @@ -2076,8 +2076,7 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) return; } - chan->hcint = hcint; - hcint &= hcintmsk; + chan->hcint = hcintraw; /* * If the channel was halted due to a dequeue, the qtd list might diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 81a5ca15b..c6de1dcf2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -242,11 +242,48 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode, then we can return early. + * host-only mode or current role is host, then we can return early. */ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; + /* + * If the dr_mode is host and the dwc->current_dr_role is not the + * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode + * isn't executed yet. Ensure the phy is ready before the controller + * updates the GCTL.PRTCAPDIR or other settings by soft-resetting + * the phy. + * + * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n + * is port index. If this is a multiport host, then we need to reset + * all active ports. + */ + if (dwc->dr_mode == USB_DR_MODE_HOST) { + u32 usb3_port; + u32 usb2_port; + + usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); + + usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); + + /* Small delay for phy reset assertion */ + usleep_range(1000, 2000); + + usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); + + usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); + + /* Wait for clock synchronization */ + msleep(50); + return 0; + } + reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; dwc3_writel(dwc->regs, DWC3_DCTL, reg); @@ -993,22 +1030,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } - if (dwc->dr_mode == USB_DR_MODE_HOST || - dwc->dr_mode == USB_DR_MODE_OTG) { - reg = dwc3_readl(dwc->regs, DWC3_GUCTL); - - /* - * Enable Auto retry Feature to make the controller operating in - * Host mode on seeing transaction errors(CRC errors or internal - * overrun scenerios) on IN transfers to reply to the device - * with a non-terminating retry ACK (i.e, an ACK transcation - * packet with Retry=1 & Nump != 0) - */ - reg |= DWC3_GUCTL_HSTINAUTORETRY; - - dwc3_writel(dwc->regs, DWC3_GUCTL, reg); - } - /* * Must config both number of packets and max burst settings to enable * RX and/or TX threshold. @@ -1509,6 +1530,8 @@ static int dwc3_probe(struct platform_device *pdev) pm_runtime_put(dev); + dma_set_max_seg_size(dev, UINT_MAX); + return 0; err5: diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 55ee41283..a1d65e36a 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -238,9 +238,6 @@ #define DWC3_GCTL_GBLHIBERNATIONEN BIT(1) #define DWC3_GCTL_DSBLCLKGTNG BIT(0) -/* Global User Control Register */ -#define DWC3_GUCTL_HSTINAUTORETRY BIT(14) - /* Global User Control 1 Register */ #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 955bf820f..8d4f1b13f 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -171,10 +171,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) /* * A lot of BYT devices lack ACPI resource entries for - * the GPIOs, add a fallback mapping to the reference + * the GPIOs. If the ACPI entry for the GPIO controller + * is present add a fallback mapping to the reference * design GPIOs which all boards seem to use. */ - gpiod_add_lookup_table(&platform_bytcr_gpios); + if (acpi_dev_present("INT33FC", NULL, -1)) + gpiod_add_lookup_table(&platform_bytcr_gpios); /* * These GPIOs will turn on the USB2 PHY. Note that we have to diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 58e1bc3a7..3fc06ca8c 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -176,55 +176,58 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) /* Only usable in contexts where the role can not change. */ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) { - struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + struct dwc3 *dwc; + + /* + * FIXME: Fix this layering violation. + */ + dwc = platform_get_drvdata(qcom->dwc3); + + /* Core driver may not have probed yet. */ + if (!dwc) + return false; return dwc->xhci; } +static void dwc3_qcom_enable_wakeup_irq(int irq) +{ + if (!irq) + return; + + enable_irq(irq); + enable_irq_wake(irq); +} + +static void dwc3_qcom_disable_wakeup_irq(int irq) +{ + if (!irq) + return; + + disable_irq_wake(irq); + disable_irq_nosync(irq); +} + static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { - if (qcom->hs_phy_irq) { - disable_irq_wake(qcom->hs_phy_irq); - disable_irq_nosync(qcom->hs_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); - if (qcom->dp_hs_phy_irq) { - disable_irq_wake(qcom->dp_hs_phy_irq); - disable_irq_nosync(qcom->dp_hs_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); - if (qcom->dm_hs_phy_irq) { - disable_irq_wake(qcom->dm_hs_phy_irq); - disable_irq_nosync(qcom->dm_hs_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); - if (qcom->ss_phy_irq) { - disable_irq_wake(qcom->ss_phy_irq); - disable_irq_nosync(qcom->ss_phy_irq); - } + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); } static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) { - if (qcom->hs_phy_irq) { - enable_irq(qcom->hs_phy_irq); - enable_irq_wake(qcom->hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq); - if (qcom->dp_hs_phy_irq) { - enable_irq(qcom->dp_hs_phy_irq); - enable_irq_wake(qcom->dp_hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); - if (qcom->dm_hs_phy_irq) { - enable_irq(qcom->dm_hs_phy_irq); - enable_irq_wake(qcom->dm_hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); - if (qcom->ss_phy_irq) { - enable_irq(qcom->ss_phy_irq); - enable_irq_wake(qcom->ss_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq); } static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) @@ -326,7 +329,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 HS", qcom); if (ret) { dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); @@ -340,7 +343,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 DP_HS", qcom); if (ret) { dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); @@ -354,7 +357,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 DM_HS", qcom); if (ret) { dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); @@ -368,7 +371,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 SS", qcom); if (ret) { dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4528852fd..e617a28ac 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3234,9 +3234,14 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt) u32 reg; if (pm_runtime_suspended(dwc->dev)) { + dwc->pending_events = true; + /* + * Trigger runtime resume. The get() function will be balanced + * after processing the pending events in dwc3_process_pending + * events(). + */ pm_runtime_get(dwc->dev); disable_irq_nosync(dwc->irq_gadget); - dwc->pending_events = true; return IRQ_HANDLED; } @@ -3474,6 +3479,8 @@ void dwc3_gadget_process_pending_events(struct dwc3 *dwc) { if (dwc->pending_events) { dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf); + dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf); + pm_runtime_put(dwc->dev); dwc->pending_events = false; enable_irq(dwc->irq_gadget); } diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index ea877cba0..b18d44f04 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -88,6 +88,7 @@ static void hidg_release(struct device *dev) { struct f_hidg *hidg = container_of(dev, struct f_hidg, dev); + kfree(hidg->report_desc); kfree(hidg->set_report_buf); kfree(hidg); } @@ -1293,9 +1294,9 @@ static struct usb_function *hidg_alloc(struct usb_function_instance *fi) hidg->report_length = opts->report_length; hidg->report_desc_length = opts->report_desc_length; if (opts->report_desc) { - hidg->report_desc = devm_kmemdup(&hidg->dev, opts->report_desc, - opts->report_desc_length, - GFP_KERNEL); + hidg->report_desc = kmemdup(opts->report_desc, + opts->report_desc_length, + GFP_KERNEL); if (!hidg->report_desc) { put_device(&hidg->dev); --opts->refcnt; diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 0b7b4d097..4f221ca7a 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -950,7 +950,7 @@ static void invalidate_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; struct inode *inode = file_inode(filp); - unsigned long rc; + unsigned long __maybe_unused rc; rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 5558ea5ac..2ef2464a5 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1180,7 +1180,8 @@ static int ncm_unwrap_ntb(struct gether *port, struct sk_buff_head *list) { struct f_ncm *ncm = func_to_ncm(&port->func); - __le16 *tmp = (void *) skb->data; + unsigned char *ntb_ptr = skb->data; + __le16 *tmp; unsigned index, index2; int ndp_index; unsigned dg_len, dg_len2; @@ -1193,6 +1194,10 @@ static int ncm_unwrap_ntb(struct gether *port, const struct ndp_parser_opts *opts = ncm->parser_opts; unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0; int dgram_counter; + int to_process = skb->len; + +parse_ntb: + tmp = (__le16 *)ntb_ptr; /* dwSignature */ if (get_unaligned_le32(tmp) != opts->nth_sign) { @@ -1239,7 +1244,7 @@ static int ncm_unwrap_ntb(struct gether *port, * walk through NDP * dwSignature */ - tmp = (void *)(skb->data + ndp_index); + tmp = (__le16 *)(ntb_ptr + ndp_index); if (get_unaligned_le32(tmp) != ncm->ndp_sign) { INFO(port->func.config->cdev, "Wrong NDP SIGN\n"); goto err; @@ -1296,11 +1301,11 @@ static int ncm_unwrap_ntb(struct gether *port, if (ncm->is_crc) { uint32_t crc, crc2; - crc = get_unaligned_le32(skb->data + + crc = get_unaligned_le32(ntb_ptr + index + dg_len - crc_len); crc2 = ~crc32_le(~0, - skb->data + index, + ntb_ptr + index, dg_len - crc_len); if (crc != crc2) { INFO(port->func.config->cdev, @@ -1327,7 +1332,7 @@ static int ncm_unwrap_ntb(struct gether *port, dg_len - crc_len); if (skb2 == NULL) goto err; - skb_put_data(skb2, skb->data + index, + skb_put_data(skb2, ntb_ptr + index, dg_len - crc_len); skb_queue_tail(list, skb2); @@ -1340,10 +1345,17 @@ static int ncm_unwrap_ntb(struct gether *port, } while (ndp_len > 2 * (opts->dgram_item_len * 2)); } while (ndp_index); - dev_consume_skb_any(skb); - VDBG(port->func.config->cdev, "Parsed NTB with %d frames\n", dgram_counter); + + to_process -= block_len; + if (to_process != 0) { + ntb_ptr = (unsigned char *)(ntb_ptr + block_len); + goto parse_ntb; + } + + dev_consume_skb_any(skb); + return 0; err: skb_queue_purge(list); @@ -1423,7 +1435,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) struct usb_composite_dev *cdev = c->cdev; struct f_ncm *ncm = func_to_ncm(f); struct usb_string *us; - int status; + int status = 0; struct usb_ep *ep; struct f_ncm_opts *ncm_opts; @@ -1441,22 +1453,17 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) f->os_desc_table[0].os_desc = &ncm_opts->ncm_os_desc; } - /* - * in drivers/usb/gadget/configfs.c:configfs_composite_bind() - * configurations are bound in sequence with list_for_each_entry, - * in each configuration its functions are bound in sequence - * with list_for_each_entry, so we assume no race condition - * with regard to ncm_opts->bound access - */ - if (!ncm_opts->bound) { - mutex_lock(&ncm_opts->lock); - gether_set_gadget(ncm_opts->net, cdev->gadget); + mutex_lock(&ncm_opts->lock); + gether_set_gadget(ncm_opts->net, cdev->gadget); + if (!ncm_opts->bound) status = gether_register_netdev(ncm_opts->net); - mutex_unlock(&ncm_opts->lock); - if (status) - goto fail; - ncm_opts->bound = true; - } + mutex_unlock(&ncm_opts->lock); + + if (status) + goto fail; + + ncm_opts->bound = true; + us = usb_gstrings_attach(cdev, ncm_strings, ARRAY_SIZE(ncm_string_defs)); if (IS_ERR(us)) { diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 2707be628..cbd8d6c74 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -1950,9 +1950,13 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { /* Get endpoint status */ int pipe = index & USB_ENDPOINT_NUMBER_MASK; - struct qe_ep *target_ep = &udc->eps[pipe]; + struct qe_ep *target_ep; u16 usep; + if (pipe >= USB_MAX_ENDPOINTS) + goto stall; + target_ep = &udc->eps[pipe]; + /* stall if endpoint doesn't exist */ if (!target_ep->ep.desc) goto stall; diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index 72f1bc6a6..5b73a2aec 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -496,11 +496,13 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, /* Get the Buffer address and copy the transmit data.*/ eprambase = (u32 __force *)(udc->addr + ep->rambase); if (ep->is_in) { - memcpy(eprambase, bufferptr, bytestosend); + memcpy_toio((void __iomem *)eprambase, bufferptr, + bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET, bufferlen); } else { - memcpy(bufferptr, eprambase, bytestosend); + memcpy_toio((void __iomem *)bufferptr, eprambase, + bytestosend); } /* * Enable the buffer for transmission. @@ -514,11 +516,13 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, eprambase = (u32 __force *)(udc->addr + ep->rambase + ep->ep_usb.maxpacket); if (ep->is_in) { - memcpy(eprambase, bufferptr, bytestosend); + memcpy_toio((void __iomem *)eprambase, bufferptr, + bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET, bufferlen); } else { - memcpy(bufferptr, eprambase, bytestosend); + memcpy_toio((void __iomem *)bufferptr, eprambase, + bytestosend); } /* * Enable the buffer for transmission. @@ -1020,7 +1024,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req) udc->addr); length = req->usb_req.actual = min_t(u32, length, EP0_MAX_PACKET); - memcpy(corebuf, req->usb_req.buf, length); + memcpy_toio((void __iomem *)corebuf, req->usb_req.buf, length); udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); } else { @@ -1746,7 +1750,7 @@ static void xudc_handle_setup(struct xusb_udc *udc) /* Load up the chapter 9 command buffer.*/ ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET); - memcpy(&setup, ep0rambase, 8); + memcpy_toio((void __iomem *)&setup, ep0rambase, 8); udc->setup = setup; udc->setup.wValue = cpu_to_le16(setup.wValue); @@ -1833,7 +1837,7 @@ static void xudc_ep0_out(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + bytes_to_rx; - memcpy(buffer, ep0rambase, bytes_to_rx); + memcpy_toio((void __iomem *)buffer, ep0rambase, bytes_to_rx); if (req->usb_req.length == req->usb_req.actual) { /* Data transfer completed get ready for Status stage */ @@ -1909,7 +1913,7 @@ static void xudc_ep0_in(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + length; - memcpy(ep0rambase, buffer, length); + memcpy_toio((void __iomem *)ep0rambase, buffer, length); } udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 157742431..d87b4fb0d 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -426,8 +426,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, temp = size; size -= temp; next += temp; - if (temp == size) - goto done; } temp = snprintf(next, size, "\n"); @@ -437,7 +435,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, size -= temp; next += temp; -done: *sizep = size; *nextp = next; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index ec6739ef3..687aeab64 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -642,7 +642,13 @@ ohci_hcd_at91_drv_resume(struct device *dev) at91_start_clock(ohci_at91); - ohci_resume(hcd, false); + /* + * According to the comment in ohci_hcd_at91_drv_suspend() + * we need to do a reset if the 48Mhz clock was stopped, + * that is, if ohci_at91->wakeup is clear. Tell ohci_resume() + * to reset in this case by setting its "hibernated" flag. + */ + ohci_resume(hcd, !ohci_at91->wakeup); ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index f4b2e766f..cb22beb55 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -538,6 +538,7 @@ static int xhci_mtk_probe(struct platform_device *pdev) } device_init_wakeup(dev, true); + dma_set_max_seg_size(dev, UINT_MAX); xhci = hcd_to_xhci(hcd); xhci->main_hcd = hcd; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index aa4c5b43f..8723c7f1c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -689,7 +689,7 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, struct xhci_ring *ring, struct xhci_td *td) { - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; struct xhci_segment *seg = td->bounce_seg; struct urb *urb = td->urb; size_t len; @@ -3199,7 +3199,7 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred, static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, u32 *trb_buff_len, struct xhci_segment *seg) { - struct device *dev = xhci_to_hcd(xhci)->self.controller; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; unsigned int unalign; unsigned int max_pkt; u32 new_buff_len; diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index b4d6d9bb3..c545b27ea 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1146,7 +1146,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) struct musb_hw_ep *hw_ep = NULL; u32 rx, tx; int i, index; - unsigned long uninitialized_var(flags); + unsigned long flags; cppi = container_of(musb->dma_controller, struct cppi, controller); if (cppi->irq) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2a874058d..4d2de9ce0 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1873,9 +1873,8 @@ static void musb_pm_runtime_check_session(struct musb *musb) schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000)); musb->quirk_retries--; - break; } - /* fall through */ + break; case MUSB_QUIRK_B_INVALID_VBUS_91: if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 0c6204add..1efd5ce48 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -39,7 +39,7 @@ static const struct musb_register_map musb_regmap[] = { { "IntrUsbE", MUSB_INTRUSBE, 8 }, { "DevCtl", MUSB_DEVCTL, 8 }, { "VControl", 0x68, 32 }, - { "HWVers", 0x69, 16 }, + { "HWVers", MUSB_HWVERS, 16 }, { "LinkInfo", MUSB_LINKINFO, 8 }, { "VPLen", MUSB_VPLEN, 8 }, { "HS_EOF1", MUSB_HS_EOF1, 8 }, diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 68f18afa8..b35b6cb24 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -339,10 +339,16 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, musb_giveback(musb, urb, status); qh->is_ready = ready; + /* + * musb->lock had been unlocked in musb_giveback, so qh may + * be freed, need to get it again + */ + qh = musb_ep_get_qh(hw_ep, is_in); + /* reclaim resources (and bandwidth) ASAP; deschedule it, and * invalidate qh as soon as list_empty(&hep->urb_list) */ - if (list_empty(&qh->hep->urb_list)) { + if (qh && list_empty(&qh->hep->urb_list)) { struct list_head *head; struct dma_controller *dma = musb->dma_controller; @@ -2424,6 +2430,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) * and its URB list has emptied, recycle this qh. */ if (ready && list_empty(&qh->hep->urb_list)) { + musb_ep_set_qh(qh->hw_ep, is_in, NULL); qh->hep->hcpriv = NULL; list_del(&qh->ring); kfree(qh); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index e5aa24c1e..8af2ee371 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -312,14 +312,8 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy) { - void __iomem *base = mxs_phy->phy.io_priv; - u32 phyctrl = readl(base + HW_USBPHY_CTRL); - - if (IS_ENABLED(CONFIG_USB_OTG) && - !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE)) - return true; - - return false; + return IS_ENABLED(CONFIG_USB_OTG) && + mxs_phy->phy.last_event == USB_EVENT_ID; } static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c index 60d390e28..2923a7f69 100644 --- a/drivers/usb/phy/phy-tahvo.c +++ b/drivers/usb/phy/phy-tahvo.c @@ -398,7 +398,7 @@ static int tahvo_usb_probe(struct platform_device *pdev) tu->irq = ret = platform_get_irq(pdev, 0); if (ret < 0) - return ret; + goto err_remove_phy; ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, IRQF_ONESHOT, "tahvo-vbus", tu); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1afffa924..6d4c57280 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1001,9 +1001,9 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) }, { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) }, { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) }, - { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) }, - { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) }, - { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_UID_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_USA_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGX_PID) }, { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 31c8ccabb..9a0f9fc99 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1561,9 +1561,9 @@ #define ACTISENSE_USG_PID 0xD9A9 /* USG USB Serial Adapter */ #define ACTISENSE_NGT_PID 0xD9AA /* NGT NMEA2000 Interface */ #define ACTISENSE_NGW_PID 0xD9AB /* NGW NMEA2000 Gateway */ -#define ACTISENSE_D9AC_PID 0xD9AC /* Actisense Reserved */ -#define ACTISENSE_D9AD_PID 0xD9AD /* Actisense Reserved */ -#define ACTISENSE_D9AE_PID 0xD9AE /* Actisense Reserved */ +#define ACTISENSE_UID_PID 0xD9AC /* USB Isolating Device */ +#define ACTISENSE_USA_PID 0xD9AD /* USB to Serial Adapter */ +#define ACTISENSE_NGX_PID 0xD9AE /* NGX NMEA2000 Gateway */ #define ACTISENSE_D9AF_PID 0xD9AF /* Actisense Reserved */ #define CHETCO_SEAGAUGE_PID 0xA548 /* SeaGauge USB Adapter */ #define CHETCO_SEASWITCH_PID 0xA549 /* SeaSwitch USB Adapter */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 126e276ed..c0e385b3f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -203,6 +203,9 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5829E_ESIM 0x81e4 #define DELL_PRODUCT_5829E 0x81e6 +#define DELL_PRODUCT_FM101R_ESIM 0x8213 +#define DELL_PRODUCT_FM101R 0x8215 + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -251,6 +254,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM061K_LTA 0x0123 #define QUECTEL_PRODUCT_EM061K_LMS 0x0124 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EM060K_128 0x0128 #define QUECTEL_PRODUCT_EG91 0x0191 #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 @@ -258,6 +262,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM05G_CS 0x030c +#define QUECTEL_PRODUCT_EM05GV2 0x030e #define QUECTEL_PRODUCT_EM05CN_SG 0x0310 #define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM05CN 0x0312 @@ -267,7 +272,9 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200U 0x0901 +#define QUECTEL_PRODUCT_EG912Y 0x6001 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 +#define QUECTEL_PRODUCT_EC200A 0x6005 #define QUECTEL_PRODUCT_EM061K_LWW 0x6008 #define QUECTEL_PRODUCT_EM061K_LCN 0x6009 #define QUECTEL_PRODUCT_EC200T 0x6026 @@ -603,6 +610,8 @@ static void option_instat_callback(struct urb *urb); #define UNISOC_VENDOR_ID 0x1782 /* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */ #define TOZED_PRODUCT_LT70C 0x4055 +/* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ +#define LUAT_PRODUCT_AIR720U 0x4e00 /* Device flags */ @@ -1105,6 +1114,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(6) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM), .driver_info = RSVD(0) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(DELL_VENDOR_ID, DELL_PRODUCT_FM101R_ESIM, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -1151,6 +1162,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa), .driver_info = RSVD(3) }, /* u-blox products */ + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1311) }, /* u-blox LARA-R6 01B */ + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1312), /* u-blox LARA-R6 01B (RMNET) */ + .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(UBLOX_VENDOR_ID, 0x1313, 0xff) }, /* u-blox LARA-R6 01B (ECM) */ { USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) }, /* u-blox LARA-L6 */ { USB_DEVICE(UBLOX_VENDOR_ID, 0x1342), /* u-blox LARA-L6 (RMNET) */ .driver_info = RSVD(4) }, @@ -1184,6 +1199,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff), + .driver_info = RSVD(4) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff), @@ -1193,6 +1210,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) }, @@ -1213,6 +1233,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */ .driver_info = RSVD(3) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, @@ -1221,9 +1242,11 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */ .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200A, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, @@ -1277,6 +1300,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1033, 0xff), /* Telit LE910C1-EUX (ECM) */ .driver_info = NCTRL(0) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1035, 0xff) }, /* Telit LE910C4-WWX (ECM) */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1), @@ -1527,7 +1551,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), .driver_info = RSVD(4) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff), + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) }, @@ -2220,12 +2245,19 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0da, 0xff), /* Foxconn T99W265 MBIM variant */ + .driver_info = RSVD(3) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */ + .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */ + .driver_info = RSVD(3) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) }, /* Fibocom L716-EU (ECM/RNDIS mode) */ { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ @@ -2245,8 +2277,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 4c6747889..24b8772a3 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -38,16 +38,6 @@ static struct usb_serial_driver vendor##_device = { \ { USB_DEVICE(0x0a21, 0x8001) } /* MMT-7305WW */ DEVICE(carelink, CARELINK_IDS); -/* ZIO Motherboard USB driver */ -#define ZIO_IDS() \ - { USB_DEVICE(0x1CBE, 0x0103) } -DEVICE(zio, ZIO_IDS); - -/* Funsoft Serial USB driver */ -#define FUNSOFT_IDS() \ - { USB_DEVICE(0x1404, 0xcddc) } -DEVICE(funsoft, FUNSOFT_IDS); - /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ @@ -55,6 +45,11 @@ DEVICE(funsoft, FUNSOFT_IDS); { USB_DEVICE(0x8087, 0x0801) } DEVICE(flashloader, FLASHLOADER_IDS); +/* Funsoft Serial USB driver */ +#define FUNSOFT_IDS() \ + { USB_DEVICE(0x1404, 0xcddc) } +DEVICE(funsoft, FUNSOFT_IDS); + /* Google Serial USB SubClass */ #define GOOGLE_IDS() \ { USB_VENDOR_AND_INTERFACE_INFO(0x18d1, \ @@ -63,16 +58,21 @@ DEVICE(flashloader, FLASHLOADER_IDS); 0x01) } DEVICE(google, GOOGLE_IDS); +/* HP4x (48/49) Generic Serial driver */ +#define HP4X_IDS() \ + { USB_DEVICE(0x03f0, 0x0121) } +DEVICE(hp4x, HP4X_IDS); + +/* KAUFMANN RKS+CAN VCP */ +#define KAUFMANN_IDS() \ + { USB_DEVICE(0x16d0, 0x0870) } +DEVICE(kaufmann, KAUFMANN_IDS); + /* Libtransistor USB console */ #define LIBTRANSISTOR_IDS() \ { USB_DEVICE(0x1209, 0x8b00) } DEVICE(libtransistor, LIBTRANSISTOR_IDS); -/* ViVOpay USB Serial Driver */ -#define VIVOPAY_IDS() \ - { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ -DEVICE(vivopay, VIVOPAY_IDS); - /* Motorola USB Phone driver */ #define MOTO_IDS() \ { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \ @@ -101,10 +101,10 @@ DEVICE(nokia, NOKIA_IDS); { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */ DEVICE_N(novatel_gps, NOVATEL_IDS, 3); -/* HP4x (48/49) Generic Serial driver */ -#define HP4X_IDS() \ - { USB_DEVICE(0x03f0, 0x0121) } -DEVICE(hp4x, HP4X_IDS); +/* Siemens USB/MPI adapter */ +#define SIEMENS_IDS() \ + { USB_DEVICE(0x908, 0x0004) } +DEVICE(siemens_mpi, SIEMENS_IDS); /* Suunto ANT+ USB Driver */ #define SUUNTO_IDS() \ @@ -112,45 +112,52 @@ DEVICE(hp4x, HP4X_IDS); { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */ DEVICE(suunto, SUUNTO_IDS); -/* Siemens USB/MPI adapter */ -#define SIEMENS_IDS() \ - { USB_DEVICE(0x908, 0x0004) } -DEVICE(siemens_mpi, SIEMENS_IDS); +/* ViVOpay USB Serial Driver */ +#define VIVOPAY_IDS() \ + { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ +DEVICE(vivopay, VIVOPAY_IDS); + +/* ZIO Motherboard USB driver */ +#define ZIO_IDS() \ + { USB_DEVICE(0x1CBE, 0x0103) } +DEVICE(zio, ZIO_IDS); /* All of the above structures mushed into two lists */ static struct usb_serial_driver * const serial_drivers[] = { &carelink_device, - &zio_device, - &funsoft_device, &flashloader_device, + &funsoft_device, &google_device, + &hp4x_device, + &kaufmann_device, &libtransistor_device, - &vivopay_device, &moto_modem_device, &motorola_tetra_device, &nokia_device, &novatel_gps_device, - &hp4x_device, - &suunto_device, &siemens_mpi_device, + &suunto_device, + &vivopay_device, + &zio_device, NULL }; static const struct usb_device_id id_table[] = { CARELINK_IDS(), - ZIO_IDS(), - FUNSOFT_IDS(), FLASHLOADER_IDS(), + FUNSOFT_IDS(), GOOGLE_IDS(), + HP4X_IDS(), + KAUFMANN_IDS(), LIBTRANSISTOR_IDS(), - VIVOPAY_IDS(), MOTO_IDS(), MOTOROLA_TETRA_IDS(), NOKIA_IDS(), NOVATEL_IDS(), - HP4X_IDS(), - SUUNTO_IDS(), SIEMENS_IDS(), + SUUNTO_IDS(), + VIVOPAY_IDS(), + ZIO_IDS(), { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 6fcf5fd2f..50c8bd7cb 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -317,7 +317,8 @@ static int alauda_get_media_status(struct us_data *us, unsigned char *data) rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, command, 0xc0, 0, 1, data, 2); - usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]); + if (rc == USB_STOR_XFER_GOOD) + usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]); return rc; } @@ -453,10 +454,14 @@ static int alauda_init_media(struct us_data *us) static int alauda_check_media(struct us_data *us) { struct alauda_info *info = (struct alauda_info *) us->extra; - unsigned char status[2]; + unsigned char *status = us->iobuf; int rc; rc = alauda_get_media_status(us, status); + if (rc != USB_STOR_XFER_GOOD) { + status[0] = 0xF0; /* Pretend there's no media */ + status[1] = 0; + } /* Check for no media or door open */ if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index b8527c553..35306c055 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -553,8 +553,8 @@ static int sddr55_reset(struct us_data *us) static unsigned long sddr55_get_capacity(struct us_data *us) { - unsigned char uninitialized_var(manufacturerID); - unsigned char uninitialized_var(deviceID); + unsigned char manufacturerID; + unsigned char deviceID; int result; struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index fb99e526c..7f7534098 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -19,7 +19,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), -UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160, +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0150, 0x0160, "Super Top", "USB 2.0 SATA BRIDGE", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 2ede329ce..e789f4a75 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -192,7 +192,7 @@ static void typec_altmode_put_partner(struct altmode *altmode) if (!partner) return; - adev = &partner->adev; + adev = &altmode->adev; if (is_typec_plug(adev->dev.parent)) { struct typec_plug *plug = to_typec_plug(adev->dev.parent); @@ -459,7 +459,8 @@ static void typec_altmode_release(struct device *dev) { struct altmode *alt = to_altmode(to_typec_altmode(dev)); - typec_altmode_put_partner(alt); + if (!is_typec_port(dev->parent)) + typec_altmode_put_partner(alt); altmode_id_remove(alt->adev.dev.parent, alt->id); kfree(alt); diff --git a/drivers/usb/typec/tcpci.c b/drivers/usb/typec/tcpci.c index 9f98376d9..d1393371b 100644 --- a/drivers/usb/typec/tcpci.c +++ b/drivers/usb/typec/tcpci.c @@ -379,6 +379,10 @@ static int tcpci_init(struct tcpc_dev *tcpc) if (time_after(jiffies, timeout)) return -ETIMEDOUT; + ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT); + if (ret < 0) + return ret; + /* Handle vendor init */ if (tcpci->data->init) { ret = tcpci->data->init(tcpci, tcpci->data); diff --git a/drivers/usb/typec/tcpci.h b/drivers/usb/typec/tcpci.h index 303ebde26..dcf60399f 100644 --- a/drivers/usb/typec/tcpci.h +++ b/drivers/usb/typec/tcpci.h @@ -72,6 +72,7 @@ #define TCPC_POWER_STATUS_VBUS_PRES BIT(2) #define TCPC_FAULT_STATUS 0x1f +#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7) #define TCPC_COMMAND 0x23 #define TCPC_CMD_WAKE_I2C 0x11 diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index c64964c32..ebcb8d52d 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -497,8 +497,13 @@ static void stub_disconnect(struct usb_device *udev) /* release port */ rc = usb_hub_release_port(udev->parent, udev->portnum, (struct usb_dev_state *) udev); - if (rc) { - dev_dbg(&udev->dev, "unable to release port\n"); + /* + * NOTE: If a HUB disconnect triggered disconnect of the down stream + * device usb_hub_release_port will return -ENODEV so we can safely ignore + * that error here. + */ + if (rc && (rc != -ENODEV)) { + dev_dbg(&udev->dev, "unable to release port (%i)\n", rc); return; } |