diff options
Diffstat (limited to 'drivers/video/fbdev/da8xx-fb.c')
| -rw-r--r-- | drivers/video/fbdev/da8xx-fb.c | 1668 |
1 files changed, 1668 insertions, 0 deletions
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c new file mode 100644 index 000000000..a74096c53 --- /dev/null +++ b/drivers/video/fbdev/da8xx-fb.c @@ -0,0 +1,1668 @@ +/* + * Copyright (C) 2008-2009 MontaVista Software Inc. + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * Based on the LCD driver for TI Avalanche processors written by + * Ajay Singh and Shalom Hai. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option)any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/fb.h> +#include <linux/dma-mapping.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/wait.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/console.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/lcm.h> +#include <video/da8xx-fb.h> +#include <asm/div64.h> + +#define DRIVER_NAME "da8xx_lcdc" + +#define LCD_VERSION_1 1 +#define LCD_VERSION_2 2 + +/* LCD Status Register */ +#define LCD_END_OF_FRAME1 BIT(9) +#define LCD_END_OF_FRAME0 BIT(8) +#define LCD_PL_LOAD_DONE BIT(6) +#define LCD_FIFO_UNDERFLOW BIT(5) +#define LCD_SYNC_LOST BIT(2) +#define LCD_FRAME_DONE BIT(0) + +/* LCD DMA Control Register */ +#define LCD_DMA_BURST_SIZE(x) ((x) << 4) +#define LCD_DMA_BURST_1 0x0 +#define LCD_DMA_BURST_2 0x1 +#define LCD_DMA_BURST_4 0x2 +#define LCD_DMA_BURST_8 0x3 +#define LCD_DMA_BURST_16 0x4 +#define LCD_V1_END_OF_FRAME_INT_ENA BIT(2) +#define LCD_V2_END_OF_FRAME0_INT_ENA BIT(8) +#define LCD_V2_END_OF_FRAME1_INT_ENA BIT(9) +#define LCD_DUAL_FRAME_BUFFER_ENABLE BIT(0) + +/* LCD Control Register */ +#define LCD_CLK_DIVISOR(x) ((x) << 8) +#define LCD_RASTER_MODE 0x01 + +/* LCD Raster Control Register */ +#define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) +#define PALETTE_AND_DATA 0x00 +#define PALETTE_ONLY 0x01 +#define DATA_ONLY 0x02 + +#define LCD_MONO_8BIT_MODE BIT(9) +#define LCD_RASTER_ORDER BIT(8) +#define LCD_TFT_MODE BIT(7) +#define LCD_V1_UNDERFLOW_INT_ENA BIT(6) +#define LCD_V2_UNDERFLOW_INT_ENA BIT(5) +#define LCD_V1_PL_INT_ENA BIT(4) +#define LCD_V2_PL_INT_ENA BIT(6) +#define LCD_MONOCHROME_MODE BIT(1) +#define LCD_RASTER_ENABLE BIT(0) +#define LCD_TFT_ALT_ENABLE BIT(23) +#define LCD_STN_565_ENABLE BIT(24) +#define LCD_V2_DMA_CLK_EN BIT(2) +#define LCD_V2_LIDD_CLK_EN BIT(1) +#define LCD_V2_CORE_CLK_EN BIT(0) +#define LCD_V2_LPP_B10 26 +#define LCD_V2_TFT_24BPP_MODE BIT(25) +#define LCD_V2_TFT_24BPP_UNPACK BIT(26) + +/* LCD Raster Timing 2 Register */ +#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) +#define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8) +#define LCD_SYNC_CTRL BIT(25) +#define LCD_SYNC_EDGE BIT(24) +#define LCD_INVERT_PIXEL_CLOCK BIT(22) +#define LCD_INVERT_LINE_CLOCK BIT(21) +#define LCD_INVERT_FRAME_CLOCK BIT(20) + +/* LCD Block */ +#define LCD_PID_REG 0x0 +#define LCD_CTRL_REG 0x4 +#define LCD_STAT_REG 0x8 +#define LCD_RASTER_CTRL_REG 0x28 +#define LCD_RASTER_TIMING_0_REG 0x2C +#define LCD_RASTER_TIMING_1_REG 0x30 +#define LCD_RASTER_TIMING_2_REG 0x34 +#define LCD_DMA_CTRL_REG 0x40 +#define LCD_DMA_FRM_BUF_BASE_ADDR_0_REG 0x44 +#define LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG 0x48 +#define LCD_DMA_FRM_BUF_BASE_ADDR_1_REG 0x4C +#define LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG 0x50 + +/* Interrupt Registers available only in Version 2 */ +#define LCD_RAW_STAT_REG 0x58 +#define LCD_MASKED_STAT_REG 0x5c +#define LCD_INT_ENABLE_SET_REG 0x60 +#define LCD_INT_ENABLE_CLR_REG 0x64 +#define LCD_END_OF_INT_IND_REG 0x68 + +/* Clock registers available only on Version 2 */ +#define LCD_CLK_ENABLE_REG 0x6c +#define LCD_CLK_RESET_REG 0x70 +#define LCD_CLK_MAIN_RESET BIT(3) + +#define LCD_NUM_BUFFERS 2 + +#define PALETTE_SIZE 256 + +#define CLK_MIN_DIV 2 +#define CLK_MAX_DIV 255 + +static void __iomem *da8xx_fb_reg_base; +static unsigned int lcd_revision; +static irq_handler_t lcdc_irq_handler; +static wait_queue_head_t frame_done_wq; +static int frame_done_flag; + +static unsigned int lcdc_read(unsigned int addr) +{ + return (unsigned int)__raw_readl(da8xx_fb_reg_base + (addr)); +} + +static void lcdc_write(unsigned int val, unsigned int addr) +{ + __raw_writel(val, da8xx_fb_reg_base + (addr)); +} + +struct da8xx_fb_par { + struct device *dev; + dma_addr_t p_palette_base; + unsigned char *v_palette_base; + dma_addr_t vram_phys; + unsigned long vram_size; + void *vram_virt; + unsigned int dma_start; + unsigned int dma_end; + struct clk *lcdc_clk; + int irq; + unsigned int palette_sz; + int blank; + wait_queue_head_t vsync_wait; + int vsync_flag; + int vsync_timeout; + spinlock_t lock_for_chan_update; + + /* + * LCDC has 2 ping pong DMA channels, channel 0 + * and channel 1. + */ + unsigned int which_dma_channel_done; +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif + unsigned int lcdc_clk_rate; + void (*panel_power_ctrl)(int); + u32 pseudo_palette[16]; + struct fb_videomode mode; + struct lcd_ctrl_config cfg; +}; + +static struct fb_var_screeninfo da8xx_fb_var; + +static struct fb_fix_screeninfo da8xx_fb_fix = { + .id = "DA8xx FB Drv", + .type = FB_TYPE_PACKED_PIXELS, + .type_aux = 0, + .visual = FB_VISUAL_PSEUDOCOLOR, + .xpanstep = 0, + .ypanstep = 1, + .ywrapstep = 0, + .accel = FB_ACCEL_NONE +}; + +static struct fb_videomode known_lcd_panels[] = { + /* Sharp LCD035Q3DG01 */ + [0] = { + .name = "Sharp_LCD035Q3DG01", + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(4607), + .left_margin = 6, + .right_margin = 8, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 0, + .vsync_len = 0, + .sync = FB_SYNC_CLK_INVERT, + }, + /* Sharp LK043T1DG01 */ + [1] = { + .name = "Sharp_LK043T1DG01", + .xres = 480, + .yres = 272, + .pixclock = KHZ2PICOS(7833), + .left_margin = 2, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 41, + .vsync_len = 10, + .sync = 0, + .flag = 0, + }, + [2] = { + /* Hitachi SP10Q010 */ + .name = "SP10Q010", + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(7833), + .left_margin = 10, + .right_margin = 10, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, + .flag = 0, + }, + [3] = { + /* Densitron 84-0023-001T */ + .name = "Densitron_84-0023-001T", + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(6400), + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 30, + .vsync_len = 3, + .sync = 0, + }, +}; + +static bool da8xx_fb_is_raster_enabled(void) +{ + return !!(lcdc_read(LCD_RASTER_CTRL_REG) & LCD_RASTER_ENABLE); +} + +/* Enable the Raster Engine of the LCD Controller */ +static void lcd_enable_raster(void) +{ + u32 reg; + + /* Put LCDC in reset for several cycles */ + if (lcd_revision == LCD_VERSION_2) + /* Write 1 to reset LCDC */ + lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); + mdelay(1); + + /* Bring LCDC out of reset */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(0, LCD_CLK_RESET_REG); + mdelay(1); + + /* Above reset sequence doesnot reset register context */ + reg = lcdc_read(LCD_RASTER_CTRL_REG); + if (!(reg & LCD_RASTER_ENABLE)) + lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); +} + +/* Disable the Raster Engine of the LCD Controller */ +static void lcd_disable_raster(enum da8xx_frame_complete wait_for_frame_done) +{ + u32 reg; + int ret; + + reg = lcdc_read(LCD_RASTER_CTRL_REG); + if (reg & LCD_RASTER_ENABLE) + lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); + else + /* return if already disabled */ + return; + + if ((wait_for_frame_done == DA8XX_FRAME_WAIT) && + (lcd_revision == LCD_VERSION_2)) { + frame_done_flag = 0; + ret = wait_event_interruptible_timeout(frame_done_wq, + frame_done_flag != 0, + msecs_to_jiffies(50)); + if (ret == 0) + pr_err("LCD Controller timed out\n"); + } +} + +static void lcd_blit(int load_mode, struct da8xx_fb_par *par) +{ + u32 start; + u32 end; + u32 reg_ras; + u32 reg_dma; + u32 reg_int; + + /* init reg to clear PLM (loading mode) fields */ + reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); + reg_ras &= ~(3 << 20); + + reg_dma = lcdc_read(LCD_DMA_CTRL_REG); + + if (load_mode == LOAD_DATA) { + start = par->dma_start; + end = par->dma_end; + + reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); + if (lcd_revision == LCD_VERSION_1) { + reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA; + } else { + reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | + LCD_V2_END_OF_FRAME0_INT_ENA | + LCD_V2_END_OF_FRAME1_INT_ENA | + LCD_FRAME_DONE | LCD_SYNC_LOST; + lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); + } + reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; + + lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + } else if (load_mode == LOAD_PALETTE) { + start = par->p_palette_base; + end = start + par->palette_sz - 1; + + reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); + + if (lcd_revision == LCD_VERSION_1) { + reg_ras |= LCD_V1_PL_INT_ENA; + } else { + reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | + LCD_V2_PL_INT_ENA; + lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); + } + + lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + } + + lcdc_write(reg_dma, LCD_DMA_CTRL_REG); + lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); + + /* + * The Raster enable bit must be set after all other control fields are + * set. + */ + lcd_enable_raster(); +} + +/* Configure the Burst Size and fifo threhold of DMA */ +static int lcd_cfg_dma(int burst_size, int fifo_th) +{ + u32 reg; + + reg = lcdc_read(LCD_DMA_CTRL_REG) & 0x00000001; + switch (burst_size) { + case 1: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1); + break; + case 2: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2); + break; + case 4: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4); + break; + case 8: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8); + break; + case 16: + default: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); + break; + } + + reg |= (fifo_th << 8); + + lcdc_write(reg, LCD_DMA_CTRL_REG); + + return 0; +} + +static void lcd_cfg_ac_bias(int period, int transitions_per_int) +{ + u32 reg; + + /* Set the AC Bias Period and Number of Transisitons per Interrupt */ + reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & 0xFFF00000; + reg |= LCD_AC_BIAS_FREQUENCY(period) | + LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); + lcdc_write(reg, LCD_RASTER_TIMING_2_REG); +} + +static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, + int front_porch) +{ + u32 reg; + + reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff; + reg |= (((back_porch-1) & 0xff) << 24) + | (((front_porch-1) & 0xff) << 16) + | (((pulse_width-1) & 0x3f) << 10); + lcdc_write(reg, LCD_RASTER_TIMING_0_REG); + + /* + * LCDC Version 2 adds some extra bits that increase the allowable + * size of the horizontal timing registers. + * remember that the registers use 0 to represent 1 so all values + * that get set into register need to be decremented by 1 + */ + if (lcd_revision == LCD_VERSION_2) { + /* Mask off the bits we want to change */ + reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & ~0x780000ff; + reg |= ((front_porch-1) & 0x300) >> 8; + reg |= ((back_porch-1) & 0x300) >> 4; + reg |= ((pulse_width-1) & 0x3c0) << 21; + lcdc_write(reg, LCD_RASTER_TIMING_2_REG); + } +} + +static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, + int front_porch) +{ + u32 reg; + + reg = lcdc_read(LCD_RASTER_TIMING_1_REG) & 0x3ff; + reg |= ((back_porch & 0xff) << 24) + | ((front_porch & 0xff) << 16) + | (((pulse_width-1) & 0x3f) << 10); + lcdc_write(reg, LCD_RASTER_TIMING_1_REG); +} + +static int lcd_cfg_display(const struct lcd_ctrl_config *cfg, + struct fb_videomode *panel) +{ + u32 reg; + u32 reg_int; + + reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE | + LCD_MONO_8BIT_MODE | + LCD_MONOCHROME_MODE); + + switch (cfg->panel_shade) { + case MONOCHROME: + reg |= LCD_MONOCHROME_MODE; + if (cfg->mono_8bit_mode) + reg |= LCD_MONO_8BIT_MODE; + break; + case COLOR_ACTIVE: + reg |= LCD_TFT_MODE; + if (cfg->tft_alt_mode) + reg |= LCD_TFT_ALT_ENABLE; + break; + + case COLOR_PASSIVE: + /* AC bias applicable only for Pasive panels */ + lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt); + if (cfg->bpp == 12 && cfg->stn_565_mode) + reg |= LCD_STN_565_ENABLE; + break; + + default: + return -EINVAL; + } + + /* enable additional interrupts here */ + if (lcd_revision == LCD_VERSION_1) { + reg |= LCD_V1_UNDERFLOW_INT_ENA; + } else { + reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | + LCD_V2_UNDERFLOW_INT_ENA; + lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); + } + + lcdc_write(reg, LCD_RASTER_CTRL_REG); + + reg = lcdc_read(LCD_RASTER_TIMING_2_REG); + + reg |= LCD_SYNC_CTRL; + + if (cfg->sync_edge) + reg |= LCD_SYNC_EDGE; + else + reg &= ~LCD_SYNC_EDGE; + + if ((panel->sync & FB_SYNC_HOR_HIGH_ACT) == 0) + reg |= LCD_INVERT_LINE_CLOCK; + else + reg &= ~LCD_INVERT_LINE_CLOCK; + + if ((panel->sync & FB_SYNC_VERT_HIGH_ACT) == 0) + reg |= LCD_INVERT_FRAME_CLOCK; + else + reg &= ~LCD_INVERT_FRAME_CLOCK; + + lcdc_write(reg, LCD_RASTER_TIMING_2_REG); + + return 0; +} + +static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, + u32 bpp, u32 raster_order) +{ + u32 reg; + + if (bpp > 16 && lcd_revision == LCD_VERSION_1) + return -EINVAL; + + /* Set the Panel Width */ + /* Pixels per line = (PPL + 1)*16 */ + if (lcd_revision == LCD_VERSION_1) { + /* + * 0x3F in bits 4..9 gives max horizontal resolution = 1024 + * pixels. + */ + width &= 0x3f0; + } else { + /* + * 0x7F in bits 4..10 gives max horizontal resolution = 2048 + * pixels. + */ + width &= 0x7f0; + } + + reg = lcdc_read(LCD_RASTER_TIMING_0_REG); + reg &= 0xfffffc00; + if (lcd_revision == LCD_VERSION_1) { + reg |= ((width >> 4) - 1) << 4; + } else { + width = (width >> 4) - 1; + reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3); + } + lcdc_write(reg, LCD_RASTER_TIMING_0_REG); + + /* Set the Panel Height */ + /* Set bits 9:0 of Lines Per Pixel */ + reg = lcdc_read(LCD_RASTER_TIMING_1_REG); + reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); + lcdc_write(reg, LCD_RASTER_TIMING_1_REG); + + /* Set bit 10 of Lines Per Pixel */ + if (lcd_revision == LCD_VERSION_2) { + reg = lcdc_read(LCD_RASTER_TIMING_2_REG); + reg |= ((height - 1) & 0x400) << 16; + lcdc_write(reg, LCD_RASTER_TIMING_2_REG); + } + + /* Set the Raster Order of the Frame Buffer */ + reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8); + if (raster_order) + reg |= LCD_RASTER_ORDER; + + par->palette_sz = 16 * 2; + + switch (bpp) { + case 1: + case 2: + case 4: + case 16: + break; + case 24: + reg |= LCD_V2_TFT_24BPP_MODE; + break; + case 32: + reg |= LCD_V2_TFT_24BPP_MODE; + reg |= LCD_V2_TFT_24BPP_UNPACK; + break; + case 8: + par->palette_sz = 256 * 2; + break; + + default: + return -EINVAL; + } + + lcdc_write(reg, LCD_RASTER_CTRL_REG); + + return 0; +} + +#define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16) +static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct da8xx_fb_par *par = info->par; + unsigned short *palette = (unsigned short *) par->v_palette_base; + u_short pal; + int update_hw = 0; + + if (regno > 255) + return 1; + + if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) + return 1; + + if (info->var.bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1) + return -EINVAL; + + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + red = CNVT_TOHW(red, info->var.red.length); + green = CNVT_TOHW(green, info->var.green.length); + blue = CNVT_TOHW(blue, info->var.blue.length); + break; + case FB_VISUAL_PSEUDOCOLOR: + switch (info->var.bits_per_pixel) { + case 4: + if (regno > 15) + return -EINVAL; + + if (info->var.grayscale) { + pal = regno; + } else { + red >>= 4; + green >>= 8; + blue >>= 12; + + pal = red & 0x0f00; + pal |= green & 0x00f0; + pal |= blue & 0x000f; + } + if (regno == 0) + pal |= 0x2000; + palette[regno] = pal; + break; + + case 8: + red >>= 4; + green >>= 8; + blue >>= 12; + + pal = (red & 0x0f00); + pal |= (green & 0x00f0); + pal |= (blue & 0x000f); + + if (palette[regno] != pal) { + update_hw = 1; + palette[regno] = pal; + } + break; + } + break; + } + + /* Truecolor has hardware independent palette */ + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 v; + + if (regno > 15) + return -EINVAL; + + v = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + + ((u32 *) (info->pseudo_palette))[regno] = v; + if (palette[0] != 0x4000) { + update_hw = 1; + palette[0] = 0x4000; + } + } + + /* Update the palette in the h/w as needed. */ + if (update_hw) + lcd_blit(LOAD_PALETTE, par); + + return 0; +} +#undef CNVT_TOHW + +static void da8xx_fb_lcd_reset(void) +{ + /* DMA has to be disabled */ + lcdc_write(0, LCD_DMA_CTRL_REG); + lcdc_write(0, LCD_RASTER_CTRL_REG); + + if (lcd_revision == LCD_VERSION_2) { + lcdc_write(0, LCD_INT_ENABLE_SET_REG); + /* Write 1 to reset */ + lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG); + lcdc_write(0, LCD_CLK_RESET_REG); + } +} + +static int da8xx_fb_config_clk_divider(struct da8xx_fb_par *par, + unsigned lcdc_clk_div, + unsigned lcdc_clk_rate) +{ + int ret; + + if (par->lcdc_clk_rate != lcdc_clk_rate) { + ret = clk_set_rate(par->lcdc_clk, lcdc_clk_rate); + if (ret) { + dev_err(par->dev, + "unable to set clock rate at %u\n", + lcdc_clk_rate); + return ret; + } + par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk); + } + + /* Configure the LCD clock divisor. */ + lcdc_write(LCD_CLK_DIVISOR(lcdc_clk_div) | + (LCD_RASTER_MODE & 0x1), LCD_CTRL_REG); + + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | + LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG); + + return 0; +} + +static unsigned int da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par, + unsigned pixclock, + unsigned *lcdc_clk_rate) +{ + unsigned lcdc_clk_div; + + pixclock = PICOS2KHZ(pixclock) * 1000; + + *lcdc_clk_rate = par->lcdc_clk_rate; + + if (pixclock < (*lcdc_clk_rate / CLK_MAX_DIV)) { + *lcdc_clk_rate = clk_round_rate(par->lcdc_clk, + pixclock * CLK_MAX_DIV); + lcdc_clk_div = CLK_MAX_DIV; + } else if (pixclock > (*lcdc_clk_rate / CLK_MIN_DIV)) { + *lcdc_clk_rate = clk_round_rate(par->lcdc_clk, + pixclock * CLK_MIN_DIV); + lcdc_clk_div = CLK_MIN_DIV; + } else { + lcdc_clk_div = *lcdc_clk_rate / pixclock; + } + + return lcdc_clk_div; +} + +static int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par, + struct fb_videomode *mode) +{ + unsigned lcdc_clk_rate; + unsigned lcdc_clk_div = da8xx_fb_calc_clk_divider(par, mode->pixclock, + &lcdc_clk_rate); + + return da8xx_fb_config_clk_divider(par, lcdc_clk_div, lcdc_clk_rate); +} + +static unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par, + unsigned pixclock) +{ + unsigned lcdc_clk_div, lcdc_clk_rate; + + lcdc_clk_div = da8xx_fb_calc_clk_divider(par, pixclock, &lcdc_clk_rate); + return KHZ2PICOS(lcdc_clk_rate / (1000 * lcdc_clk_div)); +} + +static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, + struct fb_videomode *panel) +{ + u32 bpp; + int ret = 0; + + ret = da8xx_fb_calc_config_clk_divider(par, panel); + if (ret) { + dev_err(par->dev, "unable to configure clock\n"); + return ret; + } + + if (panel->sync & FB_SYNC_CLK_INVERT) + lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) | + LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG); + else + lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) & + ~LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG); + + /* Configure the DMA burst size and fifo threshold. */ + ret = lcd_cfg_dma(cfg->dma_burst_sz, cfg->fifo_th); + if (ret < 0) + return ret; + + /* Configure the vertical and horizontal sync properties. */ + lcd_cfg_vertical_sync(panel->upper_margin, panel->vsync_len, + panel->lower_margin); + lcd_cfg_horizontal_sync(panel->left_margin, panel->hsync_len, + panel->right_margin); + + /* Configure for disply */ + ret = lcd_cfg_display(cfg, panel); + if (ret < 0) + return ret; + + bpp = cfg->bpp; + + if (bpp == 12) + bpp = 16; + ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->xres, + (unsigned int)panel->yres, bpp, + cfg->raster_order); + if (ret < 0) + return ret; + + /* Configure FDD */ + lcdc_write((lcdc_read(LCD_RASTER_CTRL_REG) & 0xfff00fff) | + (cfg->fdd << 12), LCD_RASTER_CTRL_REG); + + return 0; +} + +/* IRQ handler for version 2 of LCDC */ +static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg) +{ + struct da8xx_fb_par *par = arg; + u32 stat = lcdc_read(LCD_MASKED_STAT_REG); + + if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { + lcd_disable_raster(DA8XX_FRAME_NOWAIT); + lcdc_write(stat, LCD_MASKED_STAT_REG); + lcd_enable_raster(); + } else if (stat & LCD_PL_LOAD_DONE) { + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(DA8XX_FRAME_NOWAIT); + + lcdc_write(stat, LCD_MASKED_STAT_REG); + + /* Disable PL completion interrupt */ + lcdc_write(LCD_V2_PL_INT_ENA, LCD_INT_ENABLE_CLR_REG); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + } else { + lcdc_write(stat, LCD_MASKED_STAT_REG); + + if (stat & LCD_END_OF_FRAME0) { + par->which_dma_channel_done = 0; + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + par->vsync_flag = 1; + wake_up_interruptible(&par->vsync_wait); + } + + if (stat & LCD_END_OF_FRAME1) { + par->which_dma_channel_done = 1; + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + par->vsync_flag = 1; + wake_up_interruptible(&par->vsync_wait); + } + + /* Set only when controller is disabled and at the end of + * active frame + */ + if (stat & BIT(0)) { + frame_done_flag = 1; + wake_up_interruptible(&frame_done_wq); + } + } + + lcdc_write(0, LCD_END_OF_INT_IND_REG); + return IRQ_HANDLED; +} + +/* IRQ handler for version 1 LCDC */ +static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg) +{ + struct da8xx_fb_par *par = arg; + u32 stat = lcdc_read(LCD_STAT_REG); + u32 reg_ras; + + if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { + lcd_disable_raster(DA8XX_FRAME_NOWAIT); + lcdc_write(stat, LCD_STAT_REG); + lcd_enable_raster(); + } else if (stat & LCD_PL_LOAD_DONE) { + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(DA8XX_FRAME_NOWAIT); + + lcdc_write(stat, LCD_STAT_REG); + + /* Disable PL completion inerrupt */ + reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); + reg_ras &= ~LCD_V1_PL_INT_ENA; + lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + } else { + lcdc_write(stat, LCD_STAT_REG); + + if (stat & LCD_END_OF_FRAME0) { + par->which_dma_channel_done = 0; + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + par->vsync_flag = 1; + wake_up_interruptible(&par->vsync_wait); + } + + if (stat & LCD_END_OF_FRAME1) { + par->which_dma_channel_done = 1; + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + par->vsync_flag = 1; + wake_up_interruptible(&par->vsync_wait); + } + } + + return IRQ_HANDLED; +} + +static int fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + int err = 0; + struct da8xx_fb_par *par = info->par; + int bpp = var->bits_per_pixel >> 3; + unsigned long line_size = var->xres_virtual * bpp; + + if (var->bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1) + return -EINVAL; + + switch (var->bits_per_pixel) { + case 1: + case 8: + var->red.offset = 0; + var->red.length = 8; + var->green.offset = 0; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + var->nonstd = 0; + break; + case 4: + var->red.offset = 0; + var->red.length = 4; + var->green.offset = 0; + var->green.length = 4; + var->blue.offset = 0; + var->blue.length = 4; + var->transp.offset = 0; + var->transp.length = 0; + var->nonstd = FB_NONSTD_REV_PIX_IN_B; + break; + case 16: /* RGB 565 */ + var->red.offset = 11; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 6; + var->blue.offset = 0; + var->blue.length = 5; + var->transp.offset = 0; + var->transp.length = 0; + var->nonstd = 0; + break; + case 24: + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + var->nonstd = 0; + break; + case 32: + var->transp.offset = 24; + var->transp.length = 8; + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + var->nonstd = 0; + break; + default: + err = -EINVAL; + } + + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + var->transp.msb_right = 0; + + if (line_size * var->yres_virtual > par->vram_size) + var->yres_virtual = par->vram_size / line_size; + + if (var->yres > var->yres_virtual) + var->yres = var->yres_virtual; + + if (var->xres > var->xres_virtual) + var->xres = var->xres_virtual; + + if (var->xres + var->xoffset > var->xres_virtual) + var->xoffset = var->xres_virtual - var->xres; + if (var->yres + var->yoffset > var->yres_virtual) + var->yoffset = var->yres_virtual - var->yres; + + var->pixclock = da8xx_fb_round_clk(par, var->pixclock); + + return err; +} + +#ifdef CONFIG_CPU_FREQ +static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct da8xx_fb_par *par; + + par = container_of(nb, struct da8xx_fb_par, freq_transition); + if (val == CPUFREQ_POSTCHANGE) { + if (par->lcdc_clk_rate != clk_get_rate(par->lcdc_clk)) { + par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk); + lcd_disable_raster(DA8XX_FRAME_WAIT); + da8xx_fb_calc_config_clk_divider(par, &par->mode); + if (par->blank == FB_BLANK_UNBLANK) + lcd_enable_raster(); + } + } + + return 0; +} + +static int lcd_da8xx_cpufreq_register(struct da8xx_fb_par *par) +{ + par->freq_transition.notifier_call = lcd_da8xx_cpufreq_transition; + + return cpufreq_register_notifier(&par->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par) +{ + cpufreq_unregister_notifier(&par->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} +#endif + +static int fb_remove(struct platform_device *dev) +{ + struct fb_info *info = dev_get_drvdata(&dev->dev); + + if (info) { + struct da8xx_fb_par *par = info->par; + +#ifdef CONFIG_CPU_FREQ + lcd_da8xx_cpufreq_deregister(par); +#endif + if (par->panel_power_ctrl) + par->panel_power_ctrl(0); + + lcd_disable_raster(DA8XX_FRAME_WAIT); + lcdc_write(0, LCD_RASTER_CTRL_REG); + + /* disable DMA */ + lcdc_write(0, LCD_DMA_CTRL_REG); + + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, + par->p_palette_base); + dma_free_coherent(NULL, par->vram_size, par->vram_virt, + par->vram_phys); + pm_runtime_put_sync(&dev->dev); + pm_runtime_disable(&dev->dev); + framebuffer_release(info); + + } + return 0; +} + +/* + * Function to wait for vertical sync which for this LCD peripheral + * translates into waiting for the current raster frame to complete. + */ +static int fb_wait_for_vsync(struct fb_info *info) +{ + struct da8xx_fb_par *par = info->par; + int ret; + + /* + * Set flag to 0 and wait for isr to set to 1. It would seem there is a + * race condition here where the ISR could have occurred just before or + * just after this set. But since we are just coarsely waiting for + * a frame to complete then that's OK. i.e. if the frame completed + * just before this code executed then we have to wait another full + * frame time but there is no way to avoid such a situation. On the + * other hand if the frame completed just after then we don't need + * to wait long at all. Either way we are guaranteed to return to the + * user immediately after a frame completion which is all that is + * required. + */ + par->vsync_flag = 0; + ret = wait_event_interruptible_timeout(par->vsync_wait, + par->vsync_flag != 0, + par->vsync_timeout); + if (ret < 0) + return ret; + if (ret == 0) + return -ETIMEDOUT; + + return 0; +} + +static int fb_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) +{ + struct lcd_sync_arg sync_arg; + + switch (cmd) { + case FBIOGET_CONTRAST: + case FBIOPUT_CONTRAST: + case FBIGET_BRIGHTNESS: + case FBIPUT_BRIGHTNESS: + case FBIGET_COLOR: + case FBIPUT_COLOR: + return -ENOTTY; + case FBIPUT_HSYNC: + if (copy_from_user(&sync_arg, (char *)arg, + sizeof(struct lcd_sync_arg))) + return -EFAULT; + lcd_cfg_horizontal_sync(sync_arg.back_porch, + sync_arg.pulse_width, + sync_arg.front_porch); + break; + case FBIPUT_VSYNC: + if (copy_from_user(&sync_arg, (char *)arg, + sizeof(struct lcd_sync_arg))) + return -EFAULT; + lcd_cfg_vertical_sync(sync_arg.back_porch, + sync_arg.pulse_width, + sync_arg.front_porch); + break; + case FBIO_WAITFORVSYNC: + return fb_wait_for_vsync(info); + default: + return -EINVAL; + } + return 0; +} + +static int cfb_blank(int blank, struct fb_info *info) +{ + struct da8xx_fb_par *par = info->par; + int ret = 0; + + if (par->blank == blank) + return 0; + + par->blank = blank; + switch (blank) { + case FB_BLANK_UNBLANK: + lcd_enable_raster(); + + if (par->panel_power_ctrl) + par->panel_power_ctrl(1); + break; + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_POWERDOWN: + if (par->panel_power_ctrl) + par->panel_power_ctrl(0); + + lcd_disable_raster(DA8XX_FRAME_WAIT); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +/* + * Set new x,y offsets in the virtual display for the visible area and switch + * to the new mode. + */ +static int da8xx_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + int ret = 0; + struct fb_var_screeninfo new_var; + struct da8xx_fb_par *par = fbi->par; + struct fb_fix_screeninfo *fix = &fbi->fix; + unsigned int end; + unsigned int start; + unsigned long irq_flags; + + if (var->xoffset != fbi->var.xoffset || + var->yoffset != fbi->var.yoffset) { + memcpy(&new_var, &fbi->var, sizeof(new_var)); + new_var.xoffset = var->xoffset; + new_var.yoffset = var->yoffset; + if (fb_check_var(&new_var, fbi)) + ret = -EINVAL; + else { + memcpy(&fbi->var, &new_var, sizeof(new_var)); + + start = fix->smem_start + + new_var.yoffset * fix->line_length + + new_var.xoffset * fbi->var.bits_per_pixel / 8; + end = start + fbi->var.yres * fix->line_length - 1; + par->dma_start = start; + par->dma_end = end; + spin_lock_irqsave(&par->lock_for_chan_update, + irq_flags); + if (par->which_dma_channel_done == 0) { + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + } else if (par->which_dma_channel_done == 1) { + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + } + spin_unlock_irqrestore(&par->lock_for_chan_update, + irq_flags); + } + } + + return ret; +} + +static int da8xxfb_set_par(struct fb_info *info) +{ + struct da8xx_fb_par *par = info->par; + int ret; + bool raster = da8xx_fb_is_raster_enabled(); + + if (raster) + lcd_disable_raster(DA8XX_FRAME_WAIT); + + fb_var_to_videomode(&par->mode, &info->var); + + par->cfg.bpp = info->var.bits_per_pixel; + + info->fix.visual = (par->cfg.bpp <= 8) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + info->fix.line_length = (par->mode.xres * par->cfg.bpp) / 8; + + ret = lcd_init(par, &par->cfg, &par->mode); + if (ret < 0) { + dev_err(par->dev, "lcd init failed\n"); + return ret; + } + + par->dma_start = info->fix.smem_start + + info->var.yoffset * info->fix.line_length + + info->var.xoffset * info->var.bits_per_pixel / 8; + par->dma_end = par->dma_start + + info->var.yres * info->fix.line_length - 1; + + lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + + if (raster) + lcd_enable_raster(); + + return 0; +} + +static struct fb_ops da8xx_fb_ops = { + .owner = THIS_MODULE, + .fb_check_var = fb_check_var, + .fb_set_par = da8xxfb_set_par, + .fb_setcolreg = fb_setcolreg, + .fb_pan_display = da8xx_pan_display, + .fb_ioctl = fb_ioctl, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = cfb_blank, +}; + +static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev) +{ + struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev); + struct fb_videomode *lcdc_info; + int i; + + for (i = 0, lcdc_info = known_lcd_panels; + i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) { + if (strcmp(fb_pdata->type, lcdc_info->name) == 0) + break; + } + + if (i == ARRAY_SIZE(known_lcd_panels)) { + dev_err(&dev->dev, "no panel found\n"); + return NULL; + } + dev_info(&dev->dev, "found %s panel\n", lcdc_info->name); + + return lcdc_info; +} + +static int fb_probe(struct platform_device *device) +{ + struct da8xx_lcdc_platform_data *fb_pdata = + dev_get_platdata(&device->dev); + struct resource *lcdc_regs; + struct lcd_ctrl_config *lcd_cfg; + struct fb_videomode *lcdc_info; + struct fb_info *da8xx_fb_info; + struct da8xx_fb_par *par; + struct clk *tmp_lcdc_clk; + int ret; + unsigned long ulcm; + + if (fb_pdata == NULL) { + dev_err(&device->dev, "Can not get platform data\n"); + return -ENOENT; + } + + lcdc_info = da8xx_fb_get_videomode(device); + if (lcdc_info == NULL) + return -ENODEV; + + lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0); + da8xx_fb_reg_base = devm_ioremap_resource(&device->dev, lcdc_regs); + if (IS_ERR(da8xx_fb_reg_base)) + return PTR_ERR(da8xx_fb_reg_base); + + tmp_lcdc_clk = devm_clk_get(&device->dev, "fck"); + if (IS_ERR(tmp_lcdc_clk)) { + dev_err(&device->dev, "Can not get device clock\n"); + return PTR_ERR(tmp_lcdc_clk); + } + + pm_runtime_enable(&device->dev); + pm_runtime_get_sync(&device->dev); + + /* Determine LCD IP Version */ + switch (lcdc_read(LCD_PID_REG)) { + case 0x4C100102: + lcd_revision = LCD_VERSION_1; + break; + case 0x4F200800: + case 0x4F201000: + lcd_revision = LCD_VERSION_2; + break; + default: + dev_warn(&device->dev, "Unknown PID Reg value 0x%x, " + "defaulting to LCD revision 1\n", + lcdc_read(LCD_PID_REG)); + lcd_revision = LCD_VERSION_1; + break; + } + + lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data; + + if (!lcd_cfg) { + ret = -EINVAL; + goto err_pm_runtime_disable; + } + + da8xx_fb_info = framebuffer_alloc(sizeof(struct da8xx_fb_par), + &device->dev); + if (!da8xx_fb_info) { + dev_dbg(&device->dev, "Memory allocation failed for fb_info\n"); + ret = -ENOMEM; + goto err_pm_runtime_disable; + } + + par = da8xx_fb_info->par; + par->dev = &device->dev; + par->lcdc_clk = tmp_lcdc_clk; + par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk); + if (fb_pdata->panel_power_ctrl) { + par->panel_power_ctrl = fb_pdata->panel_power_ctrl; + par->panel_power_ctrl(1); + } + + fb_videomode_to_var(&da8xx_fb_var, lcdc_info); + par->cfg = *lcd_cfg; + + da8xx_fb_lcd_reset(); + + /* allocate frame buffer */ + par->vram_size = lcdc_info->xres * lcdc_info->yres * lcd_cfg->bpp; + ulcm = lcm((lcdc_info->xres * lcd_cfg->bpp)/8, PAGE_SIZE); + par->vram_size = roundup(par->vram_size/8, ulcm); + par->vram_size = par->vram_size * LCD_NUM_BUFFERS; + + par->vram_virt = dma_alloc_coherent(NULL, + par->vram_size, + &par->vram_phys, + GFP_KERNEL | GFP_DMA); + if (!par->vram_virt) { + dev_err(&device->dev, + "GLCD: kmalloc for frame buffer failed\n"); + ret = -EINVAL; + goto err_release_fb; + } + + da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt; + da8xx_fb_fix.smem_start = par->vram_phys; + da8xx_fb_fix.smem_len = par->vram_size; + da8xx_fb_fix.line_length = (lcdc_info->xres * lcd_cfg->bpp) / 8; + + par->dma_start = par->vram_phys; + par->dma_end = par->dma_start + lcdc_info->yres * + da8xx_fb_fix.line_length - 1; + + /* allocate palette buffer */ + par->v_palette_base = dma_zalloc_coherent(NULL, PALETTE_SIZE, + &par->p_palette_base, + GFP_KERNEL | GFP_DMA); + if (!par->v_palette_base) { + dev_err(&device->dev, + "GLCD: kmalloc for palette buffer failed\n"); + ret = -EINVAL; + goto err_release_fb_mem; + } + + par->irq = platform_get_irq(device, 0); + if (par->irq < 0) { + ret = -ENOENT; + goto err_release_pl_mem; + } + + da8xx_fb_var.grayscale = + lcd_cfg->panel_shade == MONOCHROME ? 1 : 0; + da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp; + + /* Initialize fbinfo */ + da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; + da8xx_fb_info->fix = da8xx_fb_fix; + da8xx_fb_info->var = da8xx_fb_var; + da8xx_fb_info->fbops = &da8xx_fb_ops; + da8xx_fb_info->pseudo_palette = par->pseudo_palette; + da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + + ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0); + if (ret) + goto err_release_pl_mem; + da8xx_fb_info->cmap.len = par->palette_sz; + + /* initialize var_screeninfo */ + da8xx_fb_var.activate = FB_ACTIVATE_FORCE; + fb_set_var(da8xx_fb_info, &da8xx_fb_var); + + dev_set_drvdata(&device->dev, da8xx_fb_info); + + /* initialize the vsync wait queue */ + init_waitqueue_head(&par->vsync_wait); + par->vsync_timeout = HZ / 5; + par->which_dma_channel_done = -1; + spin_lock_init(&par->lock_for_chan_update); + + /* Register the Frame Buffer */ + if (register_framebuffer(da8xx_fb_info) < 0) { + dev_err(&device->dev, + "GLCD: Frame Buffer Registration Failed!\n"); + ret = -EINVAL; + goto err_dealloc_cmap; + } + +#ifdef CONFIG_CPU_FREQ + ret = lcd_da8xx_cpufreq_register(par); + if (ret) { + dev_err(&device->dev, "failed to register cpufreq\n"); + goto err_cpu_freq; + } +#endif + + if (lcd_revision == LCD_VERSION_1) + lcdc_irq_handler = lcdc_irq_handler_rev01; + else { + init_waitqueue_head(&frame_done_wq); + lcdc_irq_handler = lcdc_irq_handler_rev02; + } + + ret = devm_request_irq(&device->dev, par->irq, lcdc_irq_handler, 0, + DRIVER_NAME, par); + if (ret) + goto irq_freq; + return 0; + +irq_freq: +#ifdef CONFIG_CPU_FREQ + lcd_da8xx_cpufreq_deregister(par); +err_cpu_freq: +#endif + unregister_framebuffer(da8xx_fb_info); + +err_dealloc_cmap: + fb_dealloc_cmap(&da8xx_fb_info->cmap); + +err_release_pl_mem: + dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, + par->p_palette_base); + +err_release_fb_mem: + dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys); + +err_release_fb: + framebuffer_release(da8xx_fb_info); + +err_pm_runtime_disable: + pm_runtime_put_sync(&device->dev); + pm_runtime_disable(&device->dev); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static struct lcdc_context { + u32 clk_enable; + u32 ctrl; + u32 dma_ctrl; + u32 raster_timing_0; + u32 raster_timing_1; + u32 raster_timing_2; + u32 int_enable_set; + u32 dma_frm_buf_base_addr_0; + u32 dma_frm_buf_ceiling_addr_0; + u32 dma_frm_buf_base_addr_1; + u32 dma_frm_buf_ceiling_addr_1; + u32 raster_ctrl; +} reg_context; + +static void lcd_context_save(void) +{ + if (lcd_revision == LCD_VERSION_2) { + reg_context.clk_enable = lcdc_read(LCD_CLK_ENABLE_REG); + reg_context.int_enable_set = lcdc_read(LCD_INT_ENABLE_SET_REG); + } + + reg_context.ctrl = lcdc_read(LCD_CTRL_REG); + reg_context.dma_ctrl = lcdc_read(LCD_DMA_CTRL_REG); + reg_context.raster_timing_0 = lcdc_read(LCD_RASTER_TIMING_0_REG); + reg_context.raster_timing_1 = lcdc_read(LCD_RASTER_TIMING_1_REG); + reg_context.raster_timing_2 = lcdc_read(LCD_RASTER_TIMING_2_REG); + reg_context.dma_frm_buf_base_addr_0 = + lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + reg_context.dma_frm_buf_ceiling_addr_0 = + lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + reg_context.dma_frm_buf_base_addr_1 = + lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + reg_context.dma_frm_buf_ceiling_addr_1 = + lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + reg_context.raster_ctrl = lcdc_read(LCD_RASTER_CTRL_REG); + return; +} + +static void lcd_context_restore(void) +{ + if (lcd_revision == LCD_VERSION_2) { + lcdc_write(reg_context.clk_enable, LCD_CLK_ENABLE_REG); + lcdc_write(reg_context.int_enable_set, LCD_INT_ENABLE_SET_REG); + } + + lcdc_write(reg_context.ctrl, LCD_CTRL_REG); + lcdc_write(reg_context.dma_ctrl, LCD_DMA_CTRL_REG); + lcdc_write(reg_context.raster_timing_0, LCD_RASTER_TIMING_0_REG); + lcdc_write(reg_context.raster_timing_1, LCD_RASTER_TIMING_1_REG); + lcdc_write(reg_context.raster_timing_2, LCD_RASTER_TIMING_2_REG); + lcdc_write(reg_context.dma_frm_buf_base_addr_0, + LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(reg_context.dma_frm_buf_ceiling_addr_0, + LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + lcdc_write(reg_context.dma_frm_buf_base_addr_1, + LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(reg_context.dma_frm_buf_ceiling_addr_1, + LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + lcdc_write(reg_context.raster_ctrl, LCD_RASTER_CTRL_REG); + return; +} + +static int fb_suspend(struct device *dev) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct da8xx_fb_par *par = info->par; + + console_lock(); + if (par->panel_power_ctrl) + par->panel_power_ctrl(0); + + fb_set_suspend(info, 1); + lcd_disable_raster(DA8XX_FRAME_WAIT); + lcd_context_save(); + pm_runtime_put_sync(dev); + console_unlock(); + + return 0; +} +static int fb_resume(struct device *dev) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct da8xx_fb_par *par = info->par; + + console_lock(); + pm_runtime_get_sync(dev); + lcd_context_restore(); + if (par->blank == FB_BLANK_UNBLANK) { + lcd_enable_raster(); + + if (par->panel_power_ctrl) + par->panel_power_ctrl(1); + } + + fb_set_suspend(info, 0); + console_unlock(); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume); + +static struct platform_driver da8xx_fb_driver = { + .probe = fb_probe, + .remove = fb_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &fb_pm_ops, + }, +}; +module_platform_driver(da8xx_fb_driver); + +MODULE_DESCRIPTION("Framebuffer driver for TI da8xx/omap-l1xx"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); |